1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
|
/* $OpenBSD: sqphyreg.h,v 1.5 2008/08/31 09:54:32 jsg Exp $ */
/* $NetBSD: sqphyreg.h,v 1.1 1998/11/03 23:51:29 thorpej Exp $ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DEV_MII_SQPHYREG_H_
#define _DEV_MII_SQPHYREG_H_
/*
* Seeq 80220 Register definitions.
*/
#define MII_SQPHY_CONFIG1 0x10 /* Configuration 1 Register */
#define CONFIG1_LNK_DIS 0x8000 /* Link Detect Disable */
#define CONFIG1_XMT_DIS 0x4000 /* TP Transmitter Disable */
#define CONFIG1_XMT_PDN 0x2000 /* TP Transmitter Powerdown */
#define CONFIG1_TXEN_CRS 0x1000 /* TX_EN to CRS Loopback Disable */
#define CONFIG1_BYP_ENC 0x0800 /* Bypass Encoder */
#define CONFIG1_BYP_SCR 0x0400 /* Bypass Scrambler */
#define CONFIG1_UNSCR_DIS 0x0200 /* Unscr. Idle Reception Disable */
#define CONFIG1_EQLZR 0x0100 /* Rx Equalizer Disable */
#define CONFIG1_CABLE 0x0080 /* Cable: 1 = STP, 0 = UTP */
#define CONFIG1_RLVL0 0x0040 /* Receive Level Adjust */
#define CONFIG1_TLVL3 0x0020 /* Transmit output level adjust */
#define CONFIG1_TLVL2 0x0010
#define CONFIG1_TLVL1 0x0008
#define CONFIG1_TLVL0 0x0004
#define CONFIG1_TRF1 0x0002 /* Transmitter Rise/Fall Adjust */
#define CONFIG1_TRF0 0x0001
#define MII_SQPHY_CONFIG2 0x11 /* Configuration 2 Register */
#define CONFIG2_PLED3_1 0x8000 /* PLED3 configuration */
#define CONFIG2_PLED3_0 0x4000
/* 1 1 LINK100 (default) */
/* 1 0 Blink */
/* 0 1 On */
/* 0 0 Off */
#define CONFIG2_PLED2_1 0x2000 /* PLED2 configuration */
#define CONFIG2_PLED2_0 0x1000
/* 1 1 Activity (default) */
/* 1 0 Blink */
/* 0 1 On */
/* 0 0 Off */
#define CONFIG2_PLED1_1 0x0800 /* PLED1 configuration */
#define CONFIG2_PLED1_0 0x0400
/* 1 1 Full duplex (default) */
/* 1 0 Blink */
/* 0 1 On */
/* 0 0 Off */
#define CONFIG2_PLED0_1 0x0200 /* PLED0 configuration */
#define CONFIG2_PLED0_0 0x0100
/* 1 1 LINK10 (default) */
/* 1 0 Blink */
/* 0 1 On */
/* 0 0 Off */
#define CONFIG2_LED_DEF1 0x0080 /* LED Normal Function Select */
#define CONFIG2_LED_DEF0 0x0040
#define CONFIG2_APOL_DIS 0x0020 /* Auto Polarity Correct Disable */
#define CONFIG2_JAB_DIS 0x0010 /* Jabber Disable */
#define CONFIG2_MREG 0x0008 /* Multiple Register Access Enable */
#define CONFIG2_INT_MDIO 0x0004 /* MDIO Interrupt when idle */
#define CONFIG2_RJ_CFG 0x0002 /* R/J Configuration Select */
#define MII_SQPHY_STATUS 0x12 /* Status Output Register */
#define STATUS_INT 0x8000 /* Interrupt Detect */
#define STATUS_LNK_FAIL 0x4000 /* Link Fail */
#define STATUS_LOSS_SYNC 0x2000 /* Descrambler lost synchronization */
#define STATUS_CWRD 0x1000 /* Codeword Error */
#define STATUS_SSD 0x0800 /* Start of Stream Error */
#define STATUS_ESD 0x0400 /* End of Stream Error */
#define STATUS_RPOL 0x0200 /* Reverse Polarity Detected */
#define STATUS_JAB 0x0100 /* Jabber Detected */
#define STATUS_SPD_DET 0x0080 /* 100Mbps */
#define STATUS_DPLX_DET 0x0040 /* Full Duplex */
#define MII_SQPHY_MASK 0x13 /* Mask Register */
#define MASK_INT 0x8000 /* mask INT */
#define MASK_LNK_FAIL 0x4000 /* mask LNK_FAIL */
#define MASK_LOSS_SYNC 0x2000 /* mask LOSS_SYNC */
#define MASK_CWRD 0x1000 /* mask CWRD */
#define MASK_SSD 0x0800 /* mask SSD */
#define MASK_ESD 0x0400 /* mask ESD */
#define MASK_RPOL 0x0200 /* mask RPOL */
#define MASK_JAB 0x0100 /* mask JAB */
#define MASK_SPD_DET 0x0080 /* mask SPD_DET */
#define MASK_DPLX_DET 0x0040 /* mask DPLX_DET */
#define MASK_ANEG_STS1 0x0020 /* mask ANEG_STS1 */
#define MASK_ANEG_STS0 0x0010 /* mask ANEG_STS0 */
#define MII_SQPHY_RESERVED 0x14 /* Reserved Register */
/* All bits must be 0 */
#endif /* _DEV_MII_SQPHYREG_H_ */
|
