1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
|
/* $OpenBSD: pciide_i31244_reg.h,v 1.1 2003/06/07 20:00:32 grange Exp $ */
/* $NetBSD: pciide_i31244_reg.h,v 1.1 2003/03/18 01:41:54 thorpej Exp $ */
/*
* Copyright (c) 2002 Wasabi Systems, Inc.
* All rights reserved.
*
* Written by Jason R. Thorpe for Wasabi Systems, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed for the NetBSD Project by
* Wasabi Systems, Inc.
* 4. The name of Wasabi Systems, Inc. may not be used to endorse
* or promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DEV_PCI_PCIIDE_I31244_REG_H_
#define _DEV_PCI_PCIIDE_I31244_REG_H_
/*
* Register definitions for the Intel i31244 Serial ATA Controller.
*/
/*
* In DPA mode, the i31244 has a single 64-bit BAR.
*/
#define ARTISEA_PCI_DPA_BASE PCI_MAPREG_START
/*
* Extended Control and Status Register 0
*/
#define ARTISEA_PCI_SUECR0 0x98
#define SUECR0_LED0_ONLY (1U << 28) /* activity on LED0 only */
#define SUECR0_SFSS (1U << 16) /* Superset Features
Secondary Select */
/*
* DPA mode shared registers.
*/
#define ARTISEA_SUPDIPR 0x00 /* DPA interrupt pending register */
#define SUPDIPR_PORTSHIFT(x) ((x) * 8)
#define SUPDIPR_PHY_CS (1U << 0) /* PHY change state */
#define SUPDIPR_PHY_RDY (1U << 1) /* PHY ready */
#define SUPDIPR_FIFO_ERR (1U << 2) /* FIFO error */
#define SUPDIPR_ERR_RCVD (1U << 3) /* ERR received */
#define SUPDIPR_U_FIS_R (1U << 4) /* unrecog. FIS reception */
#define SUPDIPR_DATA_I (1U << 5) /* data integrity */
#define SUPDIPR_CRC_ED (1U << 6) /* CRC error detected */
#define SUPDIPR_IDE (1U << 7) /* IDE interrupt */
#define ARTISEA_SUPDIMR 0x04 /* DPA interrupt mask register */
/* See SUPDIPR bits. */
/*
* DPA mode offset to per-port registers.
*/
#define ARTISEA_DPA_PORT_BASE(x) (((x) + 1) * 0x200)
/*
* DPA mode per-port registers.
*/
#define ARTISEA_SUPDDR 0x00 /* DPA data port register */
/* ATA/ATAPI compatible */
#define ARTISEA_SUPDER 0x04 /* DPA error register */
/* ATA/ATAPI compatible */
#define ARTISEA_SUPDFR 0x06 /* DPA features register */
/* ATA/ATAPI compatible */
#define ARTISEA_SUPDCSR 0x08 /* DPA sector count register */
/* ATA/ATAPI compatible */
#define ARTISEA_SUPDSNR 0x0c /* DPA sector number register */
/* ATA/ATAPI compatible */
#define ARTISEA_SUPDCLR 0x10 /* DPA cylinder low register */
/* ATA/ATAPI compatible */
#define ARTISEA_SUPDCHR 0x14 /* DPA cylinder high register */
/* ATA/ATAPI compatible */
#define ARTISEA_SUPDDHR 0x18 /* DPA device/head register */
/* ATA/ATAPI compatible */
#define ARTISEA_SUPDSR 0x1c /* DPA status register */
/* ATA/ATAPI compatible */
#define ARTISEA_SUPDCR 0x1d /* DPA command register */
/* ATA/ATAPI compatible */
#define ARTISEA_SUPDASR 0x28 /* DPA alt. status register */
/* ATA/ATAPI compatible */
#define ARTISEA_SUPDDCTLR 0x29 /* DPA device control register */
/* ATA/ATAPI compatible */
#define ARTISEA_SUPDUDDTPR 0x64 /* DPA upper DMA desc. table pointer */
#define ARTISEA_SUPDUDDPR 0x6c /* DPA upper DMA data buffer pointer */
#define ARTISEA_SUPDDCMDR 0x70 /* DPA DMA command register */
/* Almost compatible with PCI IDE, but not quite. */
#define SUPDDCMDR_START (1U << 0) /* start DMA transfer (c) */
#define SUPDDCMDR_WRITE (1U << 3) /* write *to memory* (c) */
#define SUPDDCMDR_DP_DMA_ACT (1U << 8) /* first party DMA active */
#define SUPDDCMDR_FP_DMA_DIR (1U << 9) /* 1 = host->device */
#define ARTISEA_SUPDDSR 0x72 /* DPA DMA status register */
/* PCI IDE compatible */
#define ARTISEA_SUPDDDTPR 0x74 /* DPA DMA desc. table pointer */
#define ARTISEA_SUPERSET_DPA_OFF 0x100 /* offset to Superset regs: DPA mode */
#define ARTISEA_SUPDSSSR 0x000 /* DPA SATA SStatus register */
#define SUPDSSSR_IPM_NP (0 << 8) /* device not present */
#define SUPDSSSR_IPM_ACT (1U << 8) /* active state */
#define SUPDSSSR_IPM_PARTIAL (2U << 8) /* partial power mgmt */
#define SUPDSSSR_IPM_SLUMBER (6U << 8) /* slumber power mgmt */
#define SUPDSSSR_SPD_NP (0 << 4) /* device not present */
#define SUPDSSSR_SPD_G1 (1U << 4) /* Generation 1 speed */
#define SUPDSSSR_DET_NP (0 << 0) /* device not present */
#define SUPDSSSR_DET_PHY_CNE (1U << 0) /* PHY comm. not established */
#define SUPDSSSR_DET_PHY_CE (3U << 0) /* PHY comm. established */
#define SUPDSSSR_DET_PHY_LOOP (4U << 0) /* loopback mode */
#define ARTISEA_SUPDSSER 0x004 /* DPA SATA SError register */
#define SUPDSSER_DIAG_F (1U << 25) /* invalid FIS type */
#define SUPDSSER_DIAG_T (1U << 24) /* not implemented */
#define SUPDSSER_DIAG_S (1U << 23) /* not implemented */
#define SUPDSSER_DIAG_H (1U << 22) /* handshake error */
#define SUPDSSER_DIAG_C (1U << 21) /* CRC error */
#define SUPDSSER_DIAG_D (1U << 20) /* disparity error */
#define SUPDSSER_DIAG_B (1U << 19) /* not implemented */
#define SUPDSSER_DIAG_W (1U << 18) /* comm wake */
#define SUPDSSER_DIAG_I (1U << 17) /* not implemented */
#define SUPDSSER_DIAG_N (1U << 16) /* PHY RDY state change */
#define SUPDSSER_ERR_E (1U << 11) /* internal error */
#define SUPDSSER_ERR_P (1U << 10) /* protocol error */
#define SUPDSSER_ERR_C (1U << 9) /* non-recovered comm. */
#define SUPDSSER_ERR_T (1U << 8) /* non-recovered TDIE */
#define SUPDSSER_ERR_M (1U << 1) /* recovered comm. */
#define SUPDSSER_ERR_I (1U << 0) /* not implemented */
#define ARTISEA_SUPDDSCR 0x008 /* DPA SATA SControl register */
#define SUPDDSCR_IPM_ANY (0 << 8) /* no IPM mode restrictions */
#define SUPDDSCR_IPM_NO_PARTIAL (1U << 8) /* no PARTIAL mode */
#define SUPDDSCR_IPM_NO_SLUMBER (2U << 8) /* no SLUMBER mode */
#define SUPDDSCR_IPM_NONE (3U << 8) /* no PM allowed */
#define SUPDDSCR_SPD_ANY (0 << 4) /* no speed restrictions */
#define SUPDDSCR_SPD_G1 (1U << 4) /* <= Generation 1 */
#define SUPDDSCR_DET_NORM (0 << 0) /* normal operation */
#define SUPDDSCR_DET_INIT (1U << 0) /* comm. init */
#define SUPDDSCR_DET_DISABLE (4U << 0) /* disable interface */
#define ARTISEA_SUPDSDBR 0x00c /* DPA Set Device Bits register */
#define ARTISEA_SUPDPFR 0x040 /* DPA PHY feature register */
#define SUPDPFR_SSCEN (1U << 16) /* SSC enable */
#define SUPDPFR_FVS (1U << 14) /* full voltage swing */
#define ARTISEA_SUPDBFCSR 0x044 /* DPA BIST FIS ctrl/stat register */
#define SUPDBFCSR_PAT_D21_5 (0 << 30) /* D21.5s */
#define SUPDBFCSR_PAT_D24_3 (1U << 30) /* D24.3s */
#define SUPDBFCSR_PAT_D10_2 (2U << 30) /* D10.2 / K28.5 */
#define SUPDBFCSR_PAT_COUNT (3U << 30) /* counting */
#define SUPDBFCSR_CS_D21_5 (0 << 28)
#define SUPDBFCSR_CS_D24_3 (1U << 28)
#define SUPDBFCSR_CS_D10_2 (2U << 28)
#define SUPDBFCSR_CS_COUNT (3U << 30)
#define SUPDBFCSR_CLEAR_ERRS (1U << 25) /* clear errors/frames */
#define SUPDBFCSR_CE (1U << 24) /* BIST check enable */
#define SUPDBFCSR_PE (1U << 23) /* BIST pattern enable */
#define SUPDBFCSR_K28_5 ((1U << 16) | \
(1U << 8) /* send K28.5s */
#define SUPDBFCSR_BIST_ACT_RX (1U << 15) /* BIST Act. FIS was rx'd */
#define SUPDBFCSR_BIST_ACT_RX_TO (1U << 14) /* ...with transmit-only */
#define SUPDBFCSR_BIST_ACT_RX_AB (1U << 13) /* ...with align-bypass */
#define SUPDBFCSR_BIST_ACT_RX_SB (1U << 12) /* ...with scrambling-bypass */
#define SUPDBFCSR_BIST_ACT_RX_RT (1U << 11) /* ...with retimed */
#define SUPDBFCSR_BIST_ACT_RX_P (1U << 10) /* ...with primitive */
#define SUPDBFCSR_BIST_ACT_RX_AFEL (1U << 9) /* ...with AFE loopback */
#define SUPDBFCSR_BIST_ACT_TX (1U << 7) /* send BIST Act. FIS */
#define SUPDBFCSR_BIST_ACT_TX_TO (1U << 6) /* ...with transmit-only */
#define SUPDBFCSR_BIST_ACT_TX_AB (1U << 5) /* ...with align-bypass */
#define SUPDBFCSR_BIST_ACT_TX_SB (1U << 4) /* ...with scrambling-bypass */
#define SUPDBFCSR_BIST_ACT_TX_RT (1U << 3) /* ...with retimed */
#define SUPDBFCSR_BIST_ACT_TX_P (1U << 2) /* ...with primitive */
#define SUPDBFCSR_BIST_ACT_TX_AFEL (1U << 1) /* ...with AFE loopback */
#define SUPDBFCSR_INIT_NE_TO (1U << 0) /* init. near-end tx-only */
#define ARTISEA_SUPDBER 0x048 /* DPA BIST errors register */
#define ARTISEA_SUPDBFR 0x04c /* DPA BIST frames register */
#define ARTISEA_SUPDHBDLR 0x050 /* DPA Host BIST data low register */
#define ARTISEA_SUPDHBDHR 0x054 /* DPA Host BIST data high register */
#define ARTISEA_SUPDDBDLR 0x058 /* DPA Device BIST data low */
#define ARTISEA_SUPDDBDHR 0x05c /* DPA Device BIST data high */
#define ARTISEA_SUPDDSFCSR 0x068 /* DPA DMA setup FIS ctrl/stat */
#define SUPDDSFCSR_DIR (1U << 31) /* First Party setup FIS
word 0 direction bit
(1 == tx -> rx) */
#define SUPDDSFCSR_INTR (1U << 30) /* rcvd's First Party setup
FIS with I bit set */
#define SUPDDSFCSR_START_SETUP (1U << 28) /* send DMA setup FIS */
#define SUPDDSFCSR_EN_FP_AP (1U << 27) /* enab. FP DMA auto-process */
#define SUPDDSFCSR_ABORT_TSM (1U << 24) /* abort xport/link SMs */
#define ARTISEA_SUPDHDBILR 0x06c /* DPA Host DMA Buff. Id low */
#define ARTISEA_SUPDHDBIHR 0x070 /* DPA Host DMA Buff. Id high */
#define ARTISEA_SUPDHRDR0 0x074 /* DPA Host Resvd. DWORD 0 */
#define ARTISEA_SUPDHDBOR 0x078 /* DPA Host DMA Buff. offset */
#define ARTISEA_SUPDHDTCR 0x07c /* DPA Host DMA xfer count */
#define ARTISEA_SUPDHRDR1 0x080 /* DPA Host Resvd. DWORD 1 */
#define ARTISEA_SUPDDDBILR 0x084 /* DPA Device DMA Buff. Id low */
#define ARTISEA_SUPDDDBIHR 0x088 /* DPA Device DMA Buff. Id high */
#define ARTISEA_SUPDDRDR0 0x08c /* DPA Device Resvd. DWORD 0 */
#define ARTISEA_SUPDDDBOR 0x090 /* DPA Device DMA Buff. offset */
#define ARTISEA_SUPDDTCR 0x094 /* DPA Device DMA xfer count */
#define ARTISEA_SUPDDRDR1 0x09c /* DPA Device Resvd. DWORD 1 */
#endif /* _DEV_PCI_PCIIDE_I31244_REG_H_ */
|
