1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
|
/* $OpenBSD: pciide_pdc202xx_reg.h,v 1.14 2006/06/24 07:51:30 jsg Exp $ */
/* $NetBSD: pciide_pdc202xx_reg.h,v 1.5 2001/07/05 08:38:27 toshii Exp $ */
/*
* Copyright (c) 1999 Manuel Bouyer.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Manuel Bouyer.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifndef _DEV_PCI_PCIIDE_PDC202XX_REG_H_
#define _DEV_PCI_PCIIDE_PDC202XX_REG_H_
/*
* Registers definitions for PROMISE PDC20246/PDC20262 PCI IDE controller.
* Unfortunably the HW docs are not publically available. I've been able
* to get a partial one for the PDC20246, and a better one for the PDC20262
* from Promise.
*/
#define PDC2xx_STATE 0x50
#define PDC2xx_STATE_IDERAID 0x0001
#define PDC2xx_STATE_NATIVE 0x0080
/* controller initial state values(PDC20246 only) */
#define PDC246_STATE_SHIPID 0x8000
#define PDC246_STATE_IOCHRDY 0x0400
#define PDC246_STATE_LBA(channel) (0x0100 << (channel))
#define PDC246_STATE_ISAIRQ 0x0008
#define PDC246_STATE_EN(channel) (0x0002 << (channel))
/* controller initial state values(PDC20262 only) */
#define PDC262_STATE_EN(chan) (0x1000 << (chan))
#define PDC262_STATE_80P(chan) (0x0400 << (chan))
/* per-drive timings */
#define PDC2xx_TIM(channel, drive) (0x60 + 4 * (drive) + 8 * (channel))
#define PDC2xx_TIM_SET_PA(r, x) (((r) & 0xfffffff0) | ((x) & 0xf))
#define PDC2xx_TIM_SET_PB(r, x) (((r) & 0xffffe0ff) | (((x) & 0x1f) << 8))
#define PDC2xx_TIM_SET_MB(r, x) (((r) & 0xffff1fff) | (((x) & 0x7) << 13))
#define PDC2xx_TIM_SET_MC(r, x) (((r) & 0xfff0ffff) | (((x) & 0xf) << 16))
#define PDC2xx_TIM_PRE 0x00000010
#define PDC2xx_TIM_IORDY 0x00000020
#define PDC2xx_TIM_ERRDY 0x00000040
#define PDC2xx_TIM_SYNC 0x00000080
#define PDC2xx_TIM_DMAW 0x00100000
#define PDC2xx_TIM_DMAR 0x00200000
#define PDC2xx_TIM_IORDYp 0x00400000
#define PDC2xx_TIM_DMARQp 0x00800000
/* The following are extensions of the DMA registers */
/* Ultra-DMA mode 3/4 control (PDC20262 only, 1 byte) */
#define PDC262_U66 0x11
#define PDC262_U66_EN(chan) (0x2 << ((chan) *2))
/* primary mode (1 byte) */
#define PDC2xx_PM 0x1a
/* secondary mode (1 byte) */
#define PDC2xx_SM 0x1b
/* System control register (4 bytes) */
#define PDC2xx_SCR 0x1c
#define PDC2xx_SCR_SET_GEN(r,x) (((r) & 0xffffff00) | ((x) & 0xff))
#define PDC2xx_SCR_EMPTY(channel) (0x00000100 << (4 * channel))
#define PDC2xx_SCR_FULL(channel) (0x00000200 << (4 * channel))
#define PDC2xx_SCR_INT(channel) (0x00000400 << (4 * channel))
#define PDC2xx_SCR_ERR(channel) (0x00000800 << (4 * channel))
#define PDC2xx_SCR_SET_I2C(r,x) (((r) & 0xfff0ffff) | (((x) & 0xf) << 16))
#define PDC2xx_SCR_SET_POLL(r,x) (((r) & 0xff0fffff) | (((x) & 0xf) << 20))
#define PDC2xx_SCR_DMA 0x01000000
#define PDC2xx_SCR_IORDY 0x02000000
#define PDC2xx_SCR_G2FD 0x04000000
#define PDC2xx_SCR_FLOAT 0x08000000
#define PDC2xx_SCR_RSET 0x10000000
#define PDC2xx_SCR_TST 0x20000000
/* Values for "General Purpose Register" (PDC20262 only) */
#define PDC262_SCR_GEN_LAT 0x20
/* ATAPI port ((PDC20262 only) (4 bytes) */
#define PDC262_ATAPI(chan) (0x20 + (4 * (chan)))
#define PDC262_ATAPI_WC_MASK 0x00000fff
#define PDC262_ATAPI_DMA_READ 0x00001000
#define PDC262_ATAPI_DMA_WRITE 0x00002000
#define PDC262_ATAPI_UDMA 0x00004000
#define PDC262_ATAPI_LBA48_READ 0x05000000
#define PDC262_ATAPI_LBA48_WRITE 0x06000000
/*
* The timings provided here cmoes from the PDC20262 docs. I hope they are
* rigth for the PDC20246 too ...
*/
static int8_t pdc2xx_pa[] = {0x9, 0x5, 0x3, 0x2, 0x1};
static int8_t pdc2xx_pb[] = {0x13, 0xc, 0x8, 0x6, 0x4};
static int8_t pdc2xx_dma_mb[] = {0x3, 0x3, 0x3};
static int8_t pdc2xx_dma_mc[] = {0x5, 0x4, 0x3};
static int8_t pdc2xx_udma_mb[] = {0x3, 0x2, 0x1, 0x2, 0x1, 0x1};
static int8_t pdc2xx_udma_mc[] = {0x3, 0x2, 0x1, 0x2, 0x1, 0x1};
/*
* Registers definitions for Promise PDC20268 and above chips
*/
#define PDC268_INDEX(chan) (0x01 + IDEDMA_SCH_OFFSET * (chan))
#define PDC268_DATA(chan) (0x03 + IDEDMA_SCH_OFFSET * (chan))
#define PDC268_CABLE 0x04
#define PDC268_INTR 0x20
/*
* PDC203xx register definitions.
*/
#define PDC203xx_NCHANNELS 4
#define PDC203xx_BAR_IDEREGS 0x1c
/*
* PDC205xx register definitions.
*/
#define PDC40718_NCHANNELS 4
#define PDC20575_NCHANNELS 3
#define PDC205_REGADDR(base,ch) ((base)+((ch)<<8))
#define PDC205_SSTATUS(ch) PDC205_REGADDR(0x400,ch)
#define PDC205_SERROR(ch) PDC205_REGADDR(0x404,ch)
#define PDC205_SCONTROL(ch) PDC205_REGADDR(0x408,ch)
#define PDC205_MULTIPLIER(ch) PDC205_REGADDR(0x4e8,ch)
#define SCONTROL_WRITE(ps,channel,scontrol) \
bus_space_write_4((ps)->ba5_st, (ps)->ba5_sh, \
PDC205_SCONTROL(channel), scontrol)
#define SSTATUS_READ(sc,channel) \
bus_space_read_4((ps)->ba5_st, (ps)->ba5_sh, \
PDC205_SSTATUS(channel))
/* Private data */
struct pciide_pdcsata {
bus_space_tag_t ba5_st;
bus_space_handle_t ba5_sh;
struct {
bus_space_tag_t cmd_iot;
bus_space_handle_t cmd_iohs[WDC_NREG+WDC_NSHADOWREG];
bus_space_tag_t ctl_iot;
bus_space_handle_t ctl_ioh;
bus_space_handle_t dma_iohs[IDEDMA_NREGS];
} regs[PDC203xx_NCHANNELS];
};
u_int8_t pdc203xx_read_reg(struct channel_softc *, enum wdc_regs);
void pdc203xx_write_reg(struct channel_softc *, enum wdc_regs, u_int8_t);
struct channel_softc_vtbl wdc_pdc203xx_vtbl = {
pdc203xx_read_reg,
pdc203xx_write_reg,
wdc_default_lba48_write_reg,
wdc_default_read_raw_multi_2,
wdc_default_write_raw_multi_2,
wdc_default_read_raw_multi_4,
wdc_default_write_raw_multi_4
};
#endif /* !_DEV_PCI_PCIIDE_PDC202XX_REG_H_ */
|
