path: root/sys/dev/pcmcia/if_malo.c

/*      $OpenBSD: if_malo.c,v 1.3 2007/05/25 21:32:02 mglocker Exp $ */

/*
 * Copyright (c) 2007 Marcus Glocker <mglocker@openbsd.org>
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/timeout.h>
#include <sys/socket.h>
#include <sys/tree.h>
#include <sys/malloc.h>
#include <sys/sockio.h>

#include <net/if.h>
#include <net/if_media.h>

#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/if_ether.h>

#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_radiotap.h>

#include <machine/bus.h>

#include <dev/pcmcia/pcmciareg.h>
#include <dev/pcmcia/pcmciavar.h>
#include <dev/pcmcia/pcmciadevs.h>

#include <dev/pcmcia/if_malovar.h>
#include <dev/pcmcia/if_maloreg.h>

/*
 * Driver for the Marvell 88W8385 CF chip.
 */

#ifdef CMALO_DEBUG
int cmalo_d = 1;
#define DPRINTF(l, x...)	do { if ((l) <= cmalo_d) printf(x); } while (0)
#else
#define DPRINTF(l, x...)
#endif

int	malo_pcmcia_match(struct device *, void *, void *);
void	malo_pcmcia_attach(struct device *, struct device *, void *);
int	malo_pcmcia_detach(struct device *, int);
int	malo_pcmcia_activate(struct device *, enum devact);

void	cmalo_attach(void *);
int	cmalo_ioctl(struct ifnet *, u_long, caddr_t);
int	cmalo_fw_load_helper(struct malo_softc *);
int	cmalo_fw_load_main(struct malo_softc *);
int	cmalo_init(struct ifnet *);
void	cmalo_stop(struct malo_softc *);
void	cmalo_detach(void *);
int	cmalo_intr(void *);
void	cmalo_intr_mask(struct malo_softc *sc, int);

void	cmalo_hexdump(void *, int);
int	cmalo_cmd_get_hwspec(struct malo_softc *);
int	cmalo_cmd_rsp_hwspec(struct malo_softc *);
int	cmalo_cmd_set_reset(struct malo_softc *);
int	cmalo_cmd_response(struct malo_softc *);

/*
 * PCMCIA bus.
 */
struct malo_pcmcia_softc {
	struct malo_softc	 sc_malo;

	struct pcmcia_function	*sc_pf;
	struct pcmcia_io_handle	 sc_pcioh;
	int			 sc_io_window;
	void			*sc_ih;
};

struct cfattach malo_pcmcia_ca = {
	sizeof(struct malo_pcmcia_softc),
	    malo_pcmcia_match,
	    malo_pcmcia_attach,
	    malo_pcmcia_detach,
	    malo_pcmcia_activate
};

int
malo_pcmcia_match(struct device *parent, void *match, void *aux)
{
	struct pcmcia_attach_args *pa = aux;

	if (pa->manufacturer == PCMCIA_VENDOR_AMBICOM &&
	    pa->product == PCMCIA_PRODUCT_AMBICOM_WL54CF)
		return (1);

	return (0);
}

void
malo_pcmcia_attach(struct device *parent, struct device *self, void *aux)
{
	struct malo_pcmcia_softc *psc = (struct malo_pcmcia_softc *)self;
	struct malo_softc *sc = &psc->sc_malo;
	struct pcmcia_attach_args *pa = aux;
	struct pcmcia_config_entry *cfe;
	const char *intrstr = NULL;

	psc->sc_pf = pa->pf;
	cfe = SIMPLEQ_FIRST(&pa->pf->cfe_head);

	/* enable card */
	pcmcia_function_init(psc->sc_pf, cfe);
	if (pcmcia_function_enable(psc->sc_pf)) {
		printf(": can't enable function!\n");
		return;
	}

	/* allocate I/O space */
	if (pcmcia_io_alloc(psc->sc_pf, 0,
	    cfe->iospace[0].length, cfe->iospace[0].length, &psc->sc_pcioh)) {
		printf(": can't allocate i/o space!\n");
		pcmcia_function_disable(psc->sc_pf);
		return;
	}

	/* map I/O space */
	if (pcmcia_io_map(psc->sc_pf, PCMCIA_WIDTH_IO16, 0,
	    cfe->iospace[0].length, &psc->sc_pcioh, &psc->sc_io_window)) {
		printf(": can't map i/o space!\n");
		pcmcia_io_free(psc->sc_pf, &psc->sc_pcioh);
		pcmcia_function_disable(psc->sc_pf);
		return;
	}
	sc->sc_iot = psc->sc_pcioh.iot;
	sc->sc_ioh = psc->sc_pcioh.ioh;

	printf(" port 0x%x/%d", psc->sc_pcioh.addr, psc->sc_pcioh.size);

	/* establish interrupt */
	psc->sc_ih = pcmcia_intr_establish(psc->sc_pf, IPL_NET, cmalo_intr, sc,
	    sc->sc_dev.dv_xname);
	if (psc->sc_ih == NULL) {
		printf(": can't establish interrupt!\n");
		return;
	}
	intrstr = pcmcia_intr_string(psc->sc_pf, psc->sc_ih);
	if (intrstr != NULL) {
		if (*intrstr != NULL)
			printf(", %s", intrstr);
	}
	printf("\n");

	/* attach device */
	if (rootvp == NULL)
		mountroothook_establish(cmalo_attach, sc);
	else
		cmalo_attach(sc);
}

int
malo_pcmcia_detach(struct device *dev, int flags)
{
	struct malo_pcmcia_softc *psc = (struct malo_pcmcia_softc *)dev;
	struct malo_softc *sc = &psc->sc_malo;

	cmalo_detach(sc);

	pcmcia_io_unmap(psc->sc_pf, psc->sc_io_window);
	pcmcia_io_free(psc->sc_pf, &psc->sc_pcioh);

	return (0);
}

int
malo_pcmcia_activate(struct device *dev, enum devact act)
{
	struct malo_pcmcia_softc *psc = (struct malo_pcmcia_softc *)dev;
	struct malo_softc *sc = &psc->sc_malo;
	struct ieee80211com *ic = &sc->sc_ic;
	struct ifnet *ifp = &ic->ic_if;
	int s;

	s = splnet();
	switch (act) {
	case DVACT_ACTIVATE:
		pcmcia_function_enable(psc->sc_pf);
		psc->sc_ih = pcmcia_intr_establish(psc->sc_pf, IPL_NET,
		    cmalo_intr, sc, sc->sc_dev.dv_xname);
		cmalo_init(ifp);
		break;
	case DVACT_DEACTIVATE:
		ifp->if_timer = 0;
		if (ifp->if_flags & IFF_RUNNING)
			cmalo_stop(sc);
		pcmcia_intr_disestablish(psc->sc_pf, psc->sc_ih);
		pcmcia_function_disable(psc->sc_pf);
		break;
	}
	splx(s);

	return (0);
}

/*
 * Driver.
 */
void
cmalo_attach(void *arg)
{
	struct malo_softc *sc = arg;
	struct ieee80211com *ic = &sc->sc_ic;
	struct ifnet *ifp = &sc->sc_ic.ic_if;
	int i;

	/* disable interrupts */
	cmalo_intr_mask(sc, 0);

	/* load firmware */
	if (cmalo_fw_load_helper(sc) != 0)
		return;
	if (cmalo_fw_load_main(sc) != 0)
		return;
	sc->sc_flags |= MALO_FW_LOADED;

	/* enable interrupts */
	cmalo_intr_mask(sc, 1);

	/* allocate command buffer */
	sc->sc_cmd = malloc(MALO_CMD_BUFFER_SIZE, M_USBDEV, M_WAITOK);

	/* get hardware specs */
	cmalo_cmd_get_hwspec(sc);

	/* setup interface */
	ifp->if_softc = sc;
	ifp->if_ioctl = cmalo_ioctl;
	ifp->if_init = cmalo_init;
	//ifp->if_start = cmalo_start;
	//ifp->if_watchdog = cmalo_watchdog;
	ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST;
	strlcpy(ifp->if_xname, sc->sc_dev.dv_xname, IFNAMSIZ);

	ic->ic_opmode = IEEE80211_M_STA;
	ic->ic_state = IEEE80211_S_INIT;
	ic->ic_caps =
	    IEEE80211_C_IBSS |
	    IEEE80211_C_WEP;

	ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b;
	ic->ic_sup_rates[IEEE80211_MODE_11G] = ieee80211_std_rateset_11g;

	for (i = 0; i <= 14; i++) {
		ic->ic_channels[i].ic_freq =
		    ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ);
		ic->ic_channels[i].ic_flags =
		    IEEE80211_CHAN_B |
		    IEEE80211_CHAN_G;
	}

	/* attach interface */
	if_attach(ifp);
	ieee80211_ifattach(ifp);

	ieee80211_media_init(ifp, ieee80211_media_change,
	    ieee80211_media_status);

	/* second attach line */
	printf("%s: address %s\n",
	    sc->sc_dev.dv_xname, ether_sprintf(ic->ic_myaddr));
}

int
cmalo_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
	struct malo_softc *sc = ifp->if_softc;
	struct ieee80211com *ic = &sc->sc_ic;
	struct ifaddr *ifa;
	int s, error = 0;

	s = splnet();

	switch (cmd) {
	case SIOCSIFADDR:
		ifa = (struct ifaddr *)data;
		ifp->if_flags |= IFF_UP;
#ifdef INET
		if (ifa->ifa_addr->sa_family == AF_INET)
			arp_ifinit(&ic->ic_ac, ifa);
#endif
		/* FALLTHROUGH */
	case SIOCSIFFLAGS:
		if ((ifp->if_flags & IFF_UP)) {
			if (!(ifp->if_flags & IFF_RUNNING))
				cmalo_init(ifp);
		} else {
			if ((ifp->if_flags & IFF_RUNNING))
				cmalo_stop(sc);
		}
		break;
	default:
		error = EINVAL;
		break;
	}

	splx(s);

	return (error);
}

int
cmalo_fw_load_helper(struct malo_softc *sc)
{
	const char *name = "malo8385-h";
	size_t usize;
	uint8_t *ucode, val8;
	int offset, error, bsize, i;

	/* verify if the card is ready for firmware download */
	val8 = MALO_READ_1(sc, MALO_REG_SCRATCH);
	if (val8 == MALO_VAL_SCRATCH_FW_LOADED)
		/* firmware already loaded */
		return (0);
	if (val8 != MALO_VAL_SCRATCH_READY) {
		/* bad register value */
		printf("%s: device not ready for FW download!\n",
		    sc->sc_dev.dv_xname);
		return (EIO);
	}

	/* read helper firmware image */
	if ((error = loadfirmware(name, &ucode, &usize)) != 0) {
		printf("%s: can't read microcode %s (error %d)!\n",
		    sc->sc_dev.dv_xname, name, error);
		return (EIO);
	}

	/* download the helper firmware */
	for (offset = 0; offset < usize; offset += bsize) {
		if (usize - offset >= MALO_FW_HELPER_BSIZE)
			bsize = MALO_FW_HELPER_BSIZE;
		else
			bsize = usize - offset;

		/* send a block in words and confirm it */
		DPRINTF(2, "%s: download helper FW block (%d bytes, %d off)\n",
		    sc->sc_dev.dv_xname, bsize, offset);
		MALO_WRITE_2(sc, MALO_REG_CMD_WRITE_LEN, bsize);
		MALO_WRITE_MULTI_2(sc, MALO_REG_CMD_WRITE, (ucode + offset),
		    bsize / 2);
		MALO_WRITE_1(sc, MALO_REG_HOST_STATUS, MALO_VAL_DNLD_OVER);
		MALO_WRITE_2(sc, MALO_REG_CARD_INTR_CAUSE, MALO_VAL_DNLD_OVER);

		/* poll for an acknowledgement */
		for (i = 0; i < 50; i++) {
			if (MALO_READ_1(sc, MALO_REG_CARD_STATUS) ==
			    MALO_VAL_DNLD_OVER)
				break;
			delay(1000);
		}
		if (i == 50) {
			printf("%s: timeout while helper FW block download!\n",
			    sc->sc_dev.dv_xname);
			free(ucode, M_DEVBUF);
			return (EIO);
		}
	}
	free(ucode, M_DEVBUF);

	/* helper firmware download done */
	MALO_WRITE_2(sc, MALO_REG_CMD_WRITE_LEN, 0);
	MALO_WRITE_1(sc, MALO_REG_HOST_STATUS, MALO_VAL_DNLD_OVER);
	MALO_WRITE_2(sc, MALO_REG_CARD_INTR_CAUSE, MALO_VAL_DNLD_OVER);
	DPRINTF(1, "%s: helper FW downloaded\n", sc->sc_dev.dv_xname);

	return (0);
}

int
cmalo_fw_load_main(struct malo_softc *sc)
{
	const char *name = "malo8385-m";
	size_t usize;
	uint8_t *ucode;
	uint16_t val16;
	int offset, error, bsize, retry, i;

	/* read main firmware image */
	if ((error = loadfirmware(name, &ucode, &usize)) != 0) {
		printf("%s: can't read microcode %s (error %d)!\n",
		    sc->sc_dev.dv_xname, name, error);
		return (EIO);
	}

	/* verify if the helper firmware has been loaded correctly */
	for (i = 0; i < 10; i++) {
		if (MALO_READ_1(sc, MALO_REG_RBAL) == MALO_FW_HELPER_LOADED)
			break;
		delay(1000);
	}
	if (i == 10) {
		printf("%s: helper FW not loaded!\n", sc->sc_dev.dv_xname);
		free(ucode, M_DEVBUF);
		return (EIO);
	}
	DPRINTF(1, "%s: helper FW loaded successfully\n", sc->sc_dev.dv_xname);

	/* download the main firmware */
	for (offset = 0; offset < usize; offset += bsize) {
		val16 = MALO_READ_2(sc, MALO_REG_RBAL);
		/*
		 * If the helper firmware serves us an odd integer then
		 * something went wrong and we retry to download the last
		 * block until we receive a good integer again, or give up.
		 */
		if (val16 & 0x0001) {
			if (retry > MALO_FW_MAIN_MAXRETRY) {
				printf("%s: main FW download failed!\n",
				    sc->sc_dev.dv_xname);
				free(ucode, M_DEVBUF);
				return (EIO);
			}
			retry++;
			offset -= bsize;
		} else {
			retry = 0;
			bsize = val16;
		}

		/* send a block in words and confirm it */
		DPRINTF(2, "%s: download main FW block (%d bytes, %d off)\n",
		    sc->sc_dev.dv_xname, bsize, offset);
		MALO_WRITE_2(sc, MALO_REG_CMD_WRITE_LEN, bsize);
		MALO_WRITE_MULTI_2(sc, MALO_REG_CMD_WRITE, (ucode + offset),
		    bsize / 2);
		MALO_WRITE_1(sc, MALO_REG_HOST_STATUS, MALO_VAL_DNLD_OVER);
                MALO_WRITE_2(sc, MALO_REG_CARD_INTR_CAUSE, MALO_VAL_DNLD_OVER);

		/* poll for an acknowledgement */
		for (i = 0; i < 5000; i++) {
			if (MALO_READ_1(sc, MALO_REG_CARD_STATUS) ==
			    MALO_VAL_DNLD_OVER)
				break;
		}
		if (i == 5000) {
			printf("%s: timeout while main FW block download!\n",
			    sc->sc_dev.dv_xname);
			free(ucode, M_DEVBUF);
			return (EIO);
		}
	}
	free(ucode, M_DEVBUF);

	DPRINTF(1, "%s: main FW downloaded\n", sc->sc_dev.dv_xname);

	/* verify if the main firmware has been loaded correctly */
	for (i = 0; i < 50; i++) {
		if (MALO_READ_1(sc, MALO_REG_SCRATCH) ==
		    MALO_VAL_SCRATCH_FW_LOADED)
			break;
		delay(1000);
	}
	if (i == 50) {
		printf("%s: main FW not loaded!\n", sc->sc_dev.dv_xname);
		return (EIO);
	}

	DPRINTF(1, "%s: main FW loaded successfully\n", sc->sc_dev.dv_xname);

	return (0);
}

int
cmalo_init(struct ifnet *ifp)
{
	struct malo_softc *sc = ifp->if_softc;

	/* reload the firmware if necessary */
	if (!(sc->sc_flags & MALO_FW_LOADED)) {
		if (cmalo_fw_load_helper(sc) != 0)
			return (EIO);
		if (cmalo_fw_load_main(sc) != 0)
			return (EIO);
	}

	/* device up */
	ifp->if_flags |= IFF_RUNNING;

	return (0);
}

void
cmalo_stop(struct malo_softc *sc)
{
	struct ieee80211com *ic = &sc->sc_ic;
        struct ifnet *ifp = &ic->ic_if;

	DPRINTF(1, "%s: device down\n", sc->sc_dev.dv_xname);

	/* power cycle device */
	cmalo_cmd_set_reset(sc);
	sc->sc_flags &= ~MALO_FW_LOADED;

	/* device down */
	ifp->if_flags &= ~IFF_RUNNING;
}

void
cmalo_detach(void *arg)
{
	struct malo_softc *sc = arg;
	struct ieee80211com *ic = &sc->sc_ic;
	struct ifnet *ifp = &ic->ic_if;

	/* free command buffer */
	free(sc->sc_cmd, M_DEVBUF);

	/* detach inferface */
	ieee80211_ifdetach(ifp);
	if_detach(ifp);
}

int
cmalo_intr(void *arg)
{
	struct malo_softc *sc = arg;
	uint16_t intr; 

	intr = MALO_READ_2(sc, MALO_REG_HOST_INTR_CAUSE);

	DPRINTF(2, "%s: interrupt handler called (intr = 0x%04x)\n",
	    sc->sc_dev.dv_xname, intr);

	if (intr == 0) {
		/* interrupt not for us */
		return (0);
	}
	if (intr == 0xffff) {
		/* card has been detached */
		return (0);
	}

	if (intr & MALO_VAL_HOST_INTR_CMD) {
		/* command response */
		sc->sc_cmd_running = 0;
	}

	/* acknowledge interrupt */
	intr &= MALO_VAL_HOST_INTR_MASK_ON;
	MALO_WRITE_2(sc, MALO_REG_HOST_INTR_CAUSE, intr);

	return (1);
}

void
cmalo_intr_mask(struct malo_softc *sc, int enable)
{
	uint16_t val16;

	val16 = MALO_READ_2(sc, MALO_REG_HOST_INTR_MASK);

	DPRINTF(1, "%s: intr mask changed from 0x%04x ",
	    sc->sc_dev.dv_xname, val16);

	if (enable)
		MALO_WRITE_2(sc, MALO_REG_HOST_INTR_MASK,
		    val16 & ~MALO_VAL_HOST_INTR_MASK_ON);
	else
		MALO_WRITE_2(sc, MALO_REG_HOST_INTR_MASK,
		    val16 | MALO_VAL_HOST_INTR_MASK_ON);

	val16 = MALO_READ_2(sc, MALO_REG_HOST_INTR_MASK);

	DPRINTF(1, "to 0x%04x\n", val16);
}

void
cmalo_hexdump(void *buf, int len)
{
	int i;

	for (i = 0; i < len; i++) {
		if (i % 16 == 0)
			printf("%s%4i:", i ? "\n" : "", i);
		if (i % 4 == 0)
			printf(" ");
		printf("%02x", (int)*((u_char *)buf + i));
	}

	printf("\n");
}

int
cmalo_cmd_get_hwspec(struct malo_softc *sc)
{
	struct malo_cmd_header *hdr = sc->sc_cmd;
	struct malo_cmd_body_spec *body;
	int i;

	bzero(sc->sc_cmd, MALO_CMD_BUFFER_SIZE);

	hdr->cmd = htole16(MALO_VAL_CMD_HWSPEC);
	hdr->size = htole16(sizeof(*hdr) + sizeof(*body));
	hdr->seqnum = htole16(1);
	hdr->result = 0;
	body = (struct malo_cmd_body_spec *)(hdr + 1);

	/* set all bits for MAC address, otherwise we won't get one back */
	memset(body->macaddr, 0xff, ETHER_ADDR_LEN);

	cmalo_hexdump(sc->sc_cmd, hdr->size);

	/* send command request */
	MALO_WRITE_2(sc, MALO_REG_CMD_WRITE_LEN, hdr->size);
	MALO_WRITE_MULTI_2(sc, MALO_REG_CMD_WRITE, hdr, hdr->size / 2);
	MALO_WRITE_1(sc, MALO_REG_HOST_STATUS, MALO_VAL_DNLD_OVER);
	MALO_WRITE_2(sc, MALO_REG_CARD_INTR_CAUSE, MALO_VAL_DNLD_OVER);

	/* wait for the command response */
	sc->sc_cmd_running = 1;
	for (i = 0; i < 50; i++) {
		if (sc->sc_cmd_running == 0)
			break;
		delay(1000);
	}
	if (i == 50) {
		printf("%s: timeout while waiting for cmd response!\n",
		    sc->sc_dev.dv_xname);
		return (EIO);
	}

	/* process command repsonse */
	cmalo_cmd_response(sc);

	return (0);
}

int
cmalo_cmd_rsp_hwspec(struct malo_softc *sc)
{
	struct ieee80211com *ic = &sc->sc_ic;
	struct malo_cmd_header *hdr = sc->sc_cmd;
	struct malo_cmd_body_spec *body;
	int i;

	body = (struct malo_cmd_body_spec *)(hdr + 1);

	/* get our MAC address */
	for (i = 0; i < ETHER_ADDR_LEN; i++)
		ic->ic_myaddr[i] = body->macaddr[i];

	return (0);
}

int
cmalo_cmd_set_reset(struct malo_softc *sc)
{
	struct malo_cmd_header *hdr = sc->sc_cmd;

	bzero(sc->sc_cmd, MALO_CMD_BUFFER_SIZE);

	hdr->cmd = htole16(MALO_VAL_CMD_RESET);
	hdr->size = htole16(sizeof(*hdr));
	hdr->seqnum = htole16(1);
	hdr->result = 0;

	/* send command request */
	MALO_WRITE_2(sc, MALO_REG_CMD_WRITE_LEN, hdr->size);
	MALO_WRITE_MULTI_2(sc, MALO_REG_CMD_WRITE, hdr, hdr->size / 2);
	MALO_WRITE_1(sc, MALO_REG_HOST_STATUS, MALO_VAL_DNLD_OVER);
	MALO_WRITE_2(sc, MALO_REG_CARD_INTR_CAUSE, MALO_VAL_DNLD_OVER);

	return (0);
}

int
cmalo_cmd_response(struct malo_softc *sc)
{
	struct malo_cmd_header *hdr = sc->sc_cmd;
	int len;

	bzero(sc->sc_cmd, MALO_CMD_BUFFER_SIZE);

	/* read the whole command answer */
	len = MALO_READ_2(sc, MALO_REG_CMD_READ_LEN);
	MALO_READ_MULTI_2(sc, MALO_REG_CMD_READ, sc->sc_cmd, len / 2);

	cmalo_hexdump(sc->sc_cmd, len);

	/* check for a valid command response */
	if (!(hdr->cmd & MALO_VAL_CMD_RESP)) {
		printf("%s: got invalid command response (0x%04x)!\n",
		    sc->sc_dev.dv_xname, hdr->cmd);
		return (EIO);
	}
	hdr->cmd &= ~MALO_VAL_CMD_RESP;

	/* to which command does the response belong */
	switch (hdr->cmd) {
	case MALO_VAL_CMD_HWSPEC:
		cmalo_cmd_rsp_hwspec(sc);
		break;
	case MALO_VAL_CMD_RESET:
		/* reset will not send back a response */
		break;
	default:
		printf("%s: got unknown command response (0x%04x)!\n",
		    sc->sc_dev.dv_xname, hdr->cmd);
		break;
	}

	return (0);
}