1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
|
/* $OpenBSD: if_xereg.h,v 1.1 1999/05/18 19:18:21 niklas Exp $ */
/*
* Copyright (c) 1999 Niklas Hallqvist, C Stone, Job de Haas
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Niklas Hallqvist,
* C Stone and Job de Haas.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* Additional Card Configuration Registers on Dingo */
#define PCMCIA_CCR_DCOR0 0x20
#define PCMCIA_CCR_DCOR0_MRST_SFRST 0x80
#define PCMCIA_CCR_DCOR0_MRST_SFPWDN 0x40
#define PCMCIA_CCR_DCOR0_LED3_SFRST 0x20
#define PCMCIA_CCR_DCOR0_LED3_SFPWDN 0x10
#define PCMCIA_CCR_DCOR0_BUS 0x08
#define PCMCIA_CCR_DCOR0_DECODE 0x04
#define PCMCIA_CCR_DCOR0_SFINT 0x01
#define PCMCIA_CCR_DCOR1 0x22
#define PCMCIA_CCR_DCOR1_SFCSR_WAIT 0xC0
#define PCMCIA_CCR_DCOR1_SHADOW_SFIOB 0x20
#define PCMCIA_CCR_DCOR1_SHADOW_SFCSR 0x10
#define PCMCIA_CCR_DCOR1_FORCE_LEVIREQ 0x08
#define PCMCIA_CCR_DCOR1_D6 0x04
#define PCMCIA_CCR_DCOR1_SF_STSCHG 0x02
#define PCMCIA_CCR_DCOR1_SF_IREQ 0x01
#define PCMCIA_CCR_DCOR2 0x24
#define PCMCIA_CCR_DCOR2_SHADOW_SFCOR 0x10
#define PCMCIA_CCR_DCOR2_SMEM_BASE 0x0F
#define PCMCIA_CCR_DCOR3 0x26
#define PCMCIA_CCR_DCOR4 0x28
#define PCMCIA_CCR_SFCOR 0x40
#define PCMCIA_CCR_SFCOR_SRESET 0x80
#define PCMCIA_CCR_SFCOR_LEVIREQ 0x40
#define PCMCIA_CCR_SFCOR_IRQ_STSCHG 0x20
#define PCMCIA_CCR_SFCOR_CFINDEX 0x18
#define PCMCIA_CCR_SFCOR_IREQ_ENABLE 0x04
#define PCMCIA_CCR_SFCOR_ADDR_DECODE 0x02
#define PCMCIA_CCR_SFCOR_FUNC_ENABLE 0x01
#define PCMCIA_CCR_SFCSR 0x42
#define PCMCIA_CCR_SFCSR_IOIS8 0x20
#define PCMCIA_CCR_SFCSR_AUDIO 0x08
#define PCMCIA_CCR_SFCSR_PWRDWN 0x04
#define PCMCIA_CCR_SFCSR_INTR 0x02
#define PCMCIA_CCR_SFCSR_INTRACK 0x01
#define PCMCIA_CCR_SFIOBASE0 0x4A
#define PCMCIA_CCR_SFIOBASE1 0x4C
#define PCMCIA_CCR_SFILR 0x52
#define PCMCIA_CCR_SIZE_DINGO 0x54
/* All pages */
#define CR 0x0 /* W - Command register */
#define ESR 0x0 /* R - Ethernet status register */
#define PR 0x1 /* RW - Page register select */
#define EDP 0x2 /* RW - Ethernet data port, 4 registers */
#define ISR0 0x6 /* R - Etherenet interrupt status register */
#define GIR 0x7 /* RW - Global interrupt register */
#define PTR 0xd /* R - Packets Transmitted register */
/* Page 0 */
#define TSO0 0x8 /* R - Transmit space open, 3 registers */
#define TSO1 0x9
#define TSO2 0xa
#define DO0 0xc /* W - Data offset, 2 registers */
#define DO1 0xd
#define RSR 0xc /* R - Rx status register */
#define TPR 0xd /* R - Tx packets register */
#define RBC0 0xe /* R - Rx byte count, 2 registers */
#define RBC1 0xf
/* Page 1 */
#define IMR0 0xc /* RW - Interrupt mask, 2 registers */
#define IMR1 0xd
#define ECR 0xe /* RW - Ethernet config register */
/* Page 2 */
#define RBS0 0x8 /* RW - Receive buffer start, 2 registers */
#define RBS1 0x9
#define LED 0xa /* RW - LED control register */
#define LED3 0xb /* RW - LED3 control register */
#define MSR 0xc /* RW - Misc. setup register */
#define GP2 0xd /* RW - General purpose register 2 */
/* Page 3 */
#define TPT0 0xa /* RW - Tx packet threshold, 2 registers */
#define TPT1 0xb
/* Page 4 */
#define GP0 0x8 /* RW - General purpose register 0 */
#define GP1 0x9 /* RW - General purpose register 1 */
#define BV 0xa /* R - Bonding version register */
#define EES 0xb /* RW - EEPROM control register */
/* Page 5 */
#define RHSA0 0xa /* RX host start address */
/* Page 6 */
/* Page 7 */
/* Page 8 */
/* Page 16 */
/* Page 0x40 */
#define CMD0 0x8 /* W - Receive status register */
#define RXST0 0x9 /* RW - Receive status register */
#define TXST0 0xb /* RW - Transmit status, 2 registers */
#define TXST1 0xc
#define RX0MSK 0xd /* RW - Receive status mask register */
#define TX0MSK 0xe /* RW - Transmit status mask, 2 registers */
#define TX1MSK 0xf /* RW - Dingo does not define this register */
/* Page 0x42 */
#define SWC0 0x8 /* RW - Software configuration, 2 registers */
#define SWC1 0x9
/* Page 0x50-0x57 */
#define IA 0x8 /* RW - Individual address */
/* CR register bits */
#define TX_PKT 0x01 /* Transmit packet. */
#define SOFT_RESET 0x02 /* Software reset. */
#define ENABLE_INT 0x04 /* Enable interrupt. */
#define FORCE_INT 0x08 /* Force interrupt. */
#define CLR_TX_FIFO 0x10 /* Clear transmit FIFO. */
#define CLR_RX_OVERRUN 0x20 /* Clear receive overrun. */
#define RESTART_TX 0x40 /* Restart transmit process. */
/* ESR register bits */
#define FULL_PKT_RCV 0x01 /* Full packet received. */
#define PKT_REJECTED 0x04 /* A packet was rejected. */
#define TX_PKT_PEND 0x08 /* TX Packet Pending. */
#define INCOR_POLARITY 0x10 /* XXX from linux driver, but not used there */
#define MEDIA_SELECT 0x20 /* set if TP, clear if AUI */
/* DO register bits */
#define DO_OFF_MASK 0x1fff /* Mask for offset value. */
#define DO_CHG_OFFSET 0x2000 /* Change offset command. */
#define DO_SHM_MODE 0x4000 /* Shared memory mode. */
#define DO_SKIP_RX_PKT 0x8000 /* Skip Rx packet. */
/* RBC register bits */
#define RBC_COUNT_MASK 0x1fff /* Mask for byte count. */
#define RBC_RX_FULL 0x2000 /* Receive full packet. */
#define RBC_RX_PARTIAL 0x4000 /* Receive partial packet. */
#define RBC_RX_PKT_REJ 0x8000 /* Receive packet rejected. */
/* ISR0(/IMR0) register bits */
#define ISR_TX_OFLOW 0x01 /* Transmit buffer overflow. */
#define ISR_PKT_TX 0x02 /* Packet transmitted. */
#define ISR_MAC_INT 0x04 /* MAC interrupt. */
#define ISR_RX_EARLY 0x10 /* Receive early packet. */
#define ISR_RX_FULL 0x20 /* Receive full packet. */
#define ISR_RX_PKT_REJ 0x40 /* Receive packet rejected. */
#define ISR_FORCED_INT 0x80 /* Forced interrupt. */
/* ECR register bits */
#define ECR_EARLY_TX 0x01 /* Early transmit mode. */
#define ECR_EARLY_RX 0x02 /* Early receive mode. */
#define ECR_FULL_DUPLEX 0x04 /* Full duplex select. */
#define ECR_LNK_PLS_DIS 0x20 /* Link pulse disable. */
#define ECR_SW_COMPAT 0x80 /* Software compatibility switch. */
/* GP0 register bits */
#define GP1_WR 0x01 /* GP1 pin output value. */
#define GP2_WR 0x02 /* GP2 pin output value. */
#define GP1_OUT 0x04 /* GP1 pin output select. */
#define GP2_OUT 0x08 /* GP2 pin output select. */
#define GP1_RD 0x10 /* GP1 pin input value. */
#define GP2_RD 0x20 /* GP2 pin input value. */
/* GP1 register bits */
#define POWER_UP 0x01 /* When 0, power down analogue part of chip. */
/* LED register bits */
#define LED0_SHIFT 0 /* LED0 Output shift & mask */
#define LED0_MASK 0x7
#define LED1_SHIFT 3 /* LED1 Output shift & mask */
#define LED1_MASK 0x38
#define LED0_RX_ENA 0x40 /* LED0 - receive enable */
#define LED1_RX_ENA 0x80 /* LED1 - receive enable */
/* LED3 register bits */
#define LED3_SHIFT 0 /* LED0 output shift & mask */
#define LED3_MASK 0x7
#define LED3_RX_ENA 0x40 /* LED0 - receive enable */
/* LED output values */
#define LED_DISABLE 0 /* LED disabled */
#define LED_COLL_ACT 1 /* Collision activity */
#define LED_COLL_INACT 2 /* (NOT) Collision activity */
#define LED_10MB_LINK 3 /* 10 Mb link detected */
#define LED_100MB_LINK 4 /* 100 Mb link detected */
#define LED_LINK 5 /* 10 Mb or 100 Mb link detected */
#define LED_AUTO 6 /* Automatic assertion */
#define LED_TX_ACT 7 /* Transmit activity */
/* MSR register bits */
#define SRAM_128K_EXT 0x01 /* 128K SRAM extension */
#define RBS_BIT16 0x02 /* RBS bit 16 */
#define SELECT_MII 0x08 /* Select MII */
#define HASH_TBL_ENA 0x20 /* Hash table enable */
/* GP2 register bits */
#define GP3_WR 0x01 /* GP3 pin output value. */
#define GP4_WR 0x02 /* GP4 pin output value. */
#define GP3_OUT 0x04 /* GP3 pin output select. */
#define GP4_OUT 0x08 /* GP4 pin output select. */
#define GP3_RD 0x10 /* GP3 pin input value. */
#define GP4_RD 0x20 /* GP4 pin input value. */
/* RSR register bits */
#define RSR_NOTMCAST 0x01 /* clear when multicast packet */
#define RSR_BCAST 0x02 /* set when broadcast packet */
#define RSR_TOO_LONG 0x04 /* set if packet is longer than 1518 octets */
#define RSR_ALIGNERR 0x10 /* incorrect CRC and last octet not complete */
#define RSR_CRCERR 0x20 /* incorrect CRC and last octet complete */
#define RSR_RX_OK 0x80 /* packet received okay */
/* CMD0 register bits */
#define ONLINE 0x04 /* Online */
#define OFFLINE 0x08 /* Online */
#define ENABLE_RX 0x20 /* Enable reciever */
#define DISABLE_RX 0x80 /* Disable receiver */
/* RX0Msk register bits */
#define PKT_TOO_LONG 0x02 /* Packet too long mask. */
#define CRC_ERR 0x08 /* CRC error mask. */
#define RX_OVERRUN 0x10 /* Receive overrun mask. */
#define RX_ABORT 0x40 /* Receive abort mask. */
#define RX_OK 0x80 /* Receive OK mask. */
/* TX0Msk register bits */
#define CARRIER_LOST 0x01 /* Carrier sense lost. */
#define EXCESSIVE_COLL 0x02 /* Excessive collisions mask. */
#define TX_UNDERRUN 0x08 /* Transmit underrun mask. */
#define LATE_COLLISION 0x10 /* Late collision mask. */
#define SQE 0x20 /* Signal quality error mask.. */
#define TX_ABORT 0x40 /* Transmit abort mask. */
#define TX_OK 0x80 /* Transmit OK mask. */
/* SWC1 register bits */
#define SWC1_IND_ADDR 0x01 /* Individual address enable. */
#define SWC1_MCAST_PROM 0x02 /* Multicast promiscuous enable. */
#define SWC1_PROMISC 0x04 /* Promiscuous mode enable. */
#define SWC1_BCAST_DIS 0x08 /* Broadcast disable. */
#define SWC1_MEDIA_SEL 0x40 /* Media select (Mohawk). */
#define SWC1_AUTO_MEDIA 0x80 /* Automatic media select (Mohawk). */
/* Misc. defines. */
#define PAGE(sc, page) \
bus_space_write_1((sc->sc_bst), (sc->sc_bsh), (sc->sc_offset) + PR, (page))
/*
* GP3 is connected to the MDC pin of the NS DP83840A PHY, GP4 is
* connected to the MDIO pin. These are utility macros to enhance
* readability of the code.
*/
#define MDC_LOW GP3_OUT
#define MDC_HIGH (GP3_OUT | GP3_WR)
#define MDIO_LOW GP4_OUT
#define MDIO_HIGH (GP4_OUT | GP4_WR)
#define MDIO GP4_RD
/* Values found in MANFID. */
#define XEMEDIA_ETHER 0x01
#define XEMEDIA_TOKEN 0x02
#define XEMEDIA_ARC 0x04
#define XEMEDIA_WIRELESS 0x08
#define XEMEDIA_MODEM 0x10
#define XEMEDIA_GSM 0x20
#define XEPROD_IDMASK 0x0f
#define XEPROD_POCKET 0x10
#define XEPROD_EXTERNAL 0x20
#define XEPROD_CREDITCARD 0x40
#define XEPROD_CARDBUS 0x80
|
