path: root/usr.bin/gprof/PSD.doc/gathering.me

.\"	$OpenBSD: gathering.me,v 1.3 2003/06/03 02:56:09 millert Exp $
.\"	$NetBSD: gathering.me,v 1.2 1995/04/19 07:16:39 cgd Exp $
.\"
.\" Copyright (c) 1982, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"	@(#)gathering.me	8.1 (Berkeley) 6/8/93
.\"
.sh 1 "Gathering Profile Data"
.pp
Routine calls or statement executions can be measured by having a
compiler augment the code at strategic points.
The additions can be inline increments to counters [Knuth71]
[Satterthwaite72] [Joy79] or calls to
monitoring routines [Unix].
The counter increment overhead is low, and is suitable for
profiling statements.
A call of the monitoring routine has an overhead comparable with a
call of a regular routine, and is therefore only suited
to profiling on a routine by routine basis.
However, the monitoring routine solution has certain advantages.
Whatever counters are needed by the monitoring routine can be
managed by the monitoring routine itself, rather than being
distributed around the code.
In particular, a monitoring routine can easily be called from separately
compiled programs.
In addition, different monitoring routines can be linked into the
program
being measured
to assemble different profiling data without having to
change the compiler or recompile the program.
We have exploited this approach;
our compilers for C, Fortran77, and Pascal can insert calls to a
monitoring routine in the prologue for each routine.
Use of the monitoring routine requires no planning on part of a
programmer other than to request that augmented routine
prologues be produced during compilation.
.pp
We are interested in gathering three pieces of information during
program execution: call counts and execution times for 
each profiled routine, and the arcs of the dynamic call graph
traversed by this execution of the program.
By post-processing of this data we can build the dynamic call
graph for this execution of the program and propagate times along
the edges of this graph to attribute times for routines to the
routines that invoke them.
.pp
Gathering of the profiling information should not greatly
interfere with the running of the program.
Thus, the monitoring routine must not produce trace output each
time it is invoked.
The volume of data thus produced would be unmanageably large,
and the time required to record it would overwhelm the running
time of most programs.
Similarly, the monitoring routine can not do the analysis of
the profiling data (e.g. assembling the call graph, propagating
times around it, discovering cycles, etc.) during program
execution.
Our solution is to gather profiling data in memory during program
execution and to condense it to a file as the profiled
program exits.
This file is then processed by a separate program to produce the
listing of the profile data.
An advantage of this approach is that the profile data for
several executions of a program can be combined by the
post-processing to provide a profile of many
executions.
.pp
The execution time monitoring consists of three parts.
The first part allocates and initializes the runtime monitoring data
structures before the program begins execution.
The second part is the monitoring routine invoked from the
prologue of each profiled routine.
The third part condenses the data structures and writes them
to a file as the program terminates.
The monitoring routine is discussed in detail in the following sections.
.sh 2 "Execution Counts"
.pp
The \fBgprof\fP monitoring routine counts the number of times
each profiled routine is called.
The monitoring routine also records the arc in the call graph
that activated the profiled routine.
The count is associated with the arc in the call graph
rather than with the routine.
Call counts for routines can then be determined by summing the counts
on arcs directed into that routine.
In a machine-dependent fashion, the monitoring routine notes its
own return address.
This address is in the prologue of some profiled routine that is
the destination of an arc in the dynamic call graph.
The monitoring routine also discovers the return address for that
routine, thus identifying the call site, or source of the arc.
The source of the arc is in the \fIcaller\fP, and the destination is in
the \fIcallee\fP.
For example, if a routine A calls a routine B, A is the caller, 
and B is the callee.
The prologue of B will include a call to the monitoring routine
that will note the arc from A to B and either initialize or
increment a counter for that arc.
.pp
One can not afford to have the monitoring routine output tracing
information as each arc is identified.
Therefore, the monitoring routine maintains a table of all the
arcs discovered, with counts of the numbers of times each is
traversed during execution.
This table is accessed once per routine call.
Access to it
must be as fast as possible so as not to overwhelm the time
required to execute the program.
.pp
Our solution is to access the table through a hash table.
We use the call site as the primary key with the callee
address being the secondary key.
Since each call site typically calls only one callee, we can
reduce (usually to one) the number of minor lookups based on the callee.
Another alternative would use the callee as the primary key and the
call site as the secondary key.
Such an organization has the advantage of associating callers with
callees, at the expense of longer lookups in the monitoring
routine.
We are fortunate to be running in a virtual memory environment,
and (for the sake of speed) were able to allocate enough space
for the primary hash table to allow a one-to-one mapping from
call site addresses to the primary hash table.
Thus our hash function is trivial to calculate and collisions
occur only for call sites that call multiple
destinations (e.g. functional parameters and functional variables).
A one level hash function using both call site and callee would
result in an unreasonably large hash table.
Further, the number of dynamic call sites and callees is not known during
execution of the profiled program.
.pp
Not all callers and callees can be identified by the monitoring
routine.
Routines that were compiled without the profiling augmentations
will not call the monitoring routine as part of their prologue,
and thus no arcs will be recorded whose destinations are in these
routines.
One need not profile all the routines in a program.
Routines that are not profiled run at full speed.
Certain routines, notably exception handlers, are invoked by
non-standard calling sequences.
Thus the monitoring routine may know the destination of an arc
(the callee),
but find it difficult or
impossible to determine the source of the arc (the caller).
Often in these cases the apparent source of the arc is not a call
site at all.
Such anomalous invocations are declared ``spontaneous''.
.sh 2 "Execution Times"
.pp
The execution times for routines can be gathered in at least two
ways.
One method measures the execution time of a routine by measuring
the elapsed time from routine entry to routine exit.
Unfortunately, time measurement is complicated on time-sharing
systems by the time-slicing of the program.
A second method samples the value of the program counter at some
interval, and infers execution time from the distribution of the
samples within the program.
This technique is particularly suited to time-sharing systems,
where the time-slicing can serve as the basis for sampling
the program counter.
Notice that, whereas the first method could provide exact timings,
the second is inherently a statistical approximation.
.pp
The sampling method need not require support from the operating
system:  all that is needed is the ability to set and respond to
``alarm clock'' interrupts that run relative to program time.
It is imperative that the intervals be uniform since the
sampling of the program counter rather than the duration of the
interval is the basis of the distribution.
If sampling is done too often, the interruptions to sample the
program counter will overwhelm the running of the profiled program.
On the other hand, the program must run for enough sampled
intervals that the distribution of the samples accurately
represents the distribution of time for the execution of the
program.
As with routine call tracing, the monitoring routine can not
afford to output information for each program counter
sample.
In our computing environment, the operating system can provide a
histogram of the location of the program counter at the end of
each clock tick (1/60th of a second) in which a program runs.
The histogram is assembled in memory as the program runs.
This facility is enabled by our monitoring routine.
We have adjusted the granularity of the histogram so that
program counter values map one-to-one onto the histogram.
We make the simplifying assumption that all calls to a specific
routine require the same amount of time to execute.
This assumption may disguise that some calls
(or worse, some call sites) always invoke a routine
such that its execution is faster (or slower)
than the average time for that routine.
.pp
When the profiled program terminates, 
the arc table and the histogram of
program counter samples is written to a file.
The arc table is condensed to consist of the source and destination
addresses of the arc and the count of the number of times the arc
was traversed by this execution of the program.
The recorded histogram consists of counters of the number of
times the program counter was found to be in each of the ranges covered
by the histogram.
The ranges themselves are summarized as a
lower and upper bound and a step size.