path: root/usr.bin/sed/sed.1

.\"	$OpenBSD: sed.1,v 1.52 2017/12/08 18:41:59 martijn Exp $
.\"
.\" Copyright (c) 1992, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" This code is derived from software contributed to Berkeley by
.\" the Institute of Electrical and Electronics Engineers, Inc.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"	from: @(#)sed.1	8.2 (Berkeley) 12/30/93
.\"
.Dd $Mdocdate: December 8 2017 $
.Dt SED 1
.Os
.Sh NAME
.Nm sed
.Nd stream editor
.Sh SYNOPSIS
.Nm sed
.Op Fl aEnru
.Op Fl i Ns Op Ar extension
.Ar command
.Op Ar
.Nm sed
.Op Fl aEnru
.Op Fl e Ar command
.Op Fl f Ar command_file
.Op Fl i Ns Op Ar extension
.Op Ar
.Sh DESCRIPTION
The
.Nm
utility reads the specified files, or the standard input if no files
are specified, modifying the input as specified by a list of commands.
The input is then written to the standard output.
.Pp
A single command may be specified as the first argument to
.Nm sed .
Multiple commands may be specified
separated by newlines or semicolons,
or by using the
.Fl e
or
.Fl f
options.
All commands are applied to the input in the order they are specified
regardless of their origin.
.Pp
The options are as follows:
.Bl -tag -width Ds
.It Fl a
The files listed as parameters for the
.Ic w
function or flag are created (or truncated) before any processing begins,
by default.
The
.Fl a
option causes
.Nm
to delay opening each file until a command containing the related
.Ic w
function or flag is applied to a line of input.
.It Fl E
Interpret regular expressions using POSIX extended regular expression syntax.
The default behaviour is to use POSIX basic regular expression syntax.
.It Fl e Ar command
Append the editing commands specified by the
.Ar command
argument
to the list of commands.
.It Fl f Ar command_file
Append the editing commands found in the file
.Ar command_file
to the list of commands.
The editing commands should each be listed on a separate line.
.It Fl i Ns Op Ar extension
Edit files in place, saving backups with the specified
.Ar extension .
If a zero length
.Ar extension
is given, no backup will be saved.
It is not recommended to give a zero length
.Ar extension
when in place editing files, as it risks corruption or partial content
in situations where disk space is exhausted, etc.
.It Fl r
An alias for
.Fl E ,
for compatibility with GNU sed.
.It Fl n
By default, each line of input is echoed to the standard output after
all of the commands have been applied to it.
The
.Fl n
option suppresses this behavior.
.It Fl u
Force output to be line buffered,
printing each line as it becomes available.
By default, output is line buffered when standard output is a terminal
and block buffered otherwise.
See
.Xr setvbuf 3
for a more detailed explanation.
.El
.Pp
The form of a
.Nm
command is as follows:
.Pp
.Dl [address[,address]]function[arguments]
.Pp
Whitespace may be inserted before the first address and the function
portions of the command.
.Pp
Normally,
.Nm
cyclically copies a line of input, not including its terminating newline
character, into a
.Em pattern space ,
(unless there is something left after a
.Ic D
function),
applies all of the commands with addresses that select that pattern space,
copies the pattern space to the standard output, appending a newline, and
deletes the pattern space.
.Pp
Some of the functions use a
.Em hold space
to save all or part of the pattern space for subsequent retrieval.
.Sh SED ADDRESSES
An address is not required, but if specified must be a number (that counts
input lines
cumulatively across input files), a dollar character
.Pq Ql $
that addresses the last line of input, or a context address
(which consists of a regular expression preceded and followed by a
delimiter).
.Pp
A command line with no addresses selects every pattern space.
.Pp
A command line with one address selects all of the pattern spaces
that match the address.
.Pp
A command line with two addresses selects the inclusive range from
the first pattern space that matches the first address through the next
pattern space that matches the second.
(If the second address is a number less than or equal to the line number
first selected, only that line is selected.)
Starting at the first line following the selected range,
.Nm
starts looking again for the first address.
.Pp
Editing commands can be applied to non-selected pattern spaces by use
of the exclamation character
.Pq Ql \&!
function.
.Sh SED REGULAR EXPRESSIONS
By default,
.Nm
regular expressions are basic regular expressions
.Pq BREs .
Extended regular expressions are supported using the
.Fl E
and
.Fl r
options.
See
.Xr re_format 7
for more information on regular expressions.
In addition,
.Nm
has the following two additions to BREs:
.Pp
.Bl -enum -compact
.It
In a context address, any character other than a backslash
.Pq Ql \e
or newline character may be used to delimit the regular expression.
The opening delimiter should be preceded by a backslash
unless it is a slash.
Putting a backslash character before the delimiting character
causes the character to be treated literally.
For example, in the context address \exabc\exdefx, the RE delimiter
is an
.Sq x
and the second
.Sq x
stands for itself, so that the regular expression is
.Dq abcxdef .
.Pp
.It
The escape sequence \en matches a newline character embedded in the
pattern space.
You can't, however, use a literal newline character in an address or
in the substitute command.
.El
.Pp
One special feature of
.Nm
regular expressions is that they can default to the last regular
expression used.
If a regular expression is empty, i.e., just the delimiter characters
are specified, the last regular expression encountered is used instead.
The last regular expression is defined as the last regular expression
used as part of an address or substitute command, and at run-time, not
compile-time.
For example, the command
.Dq /abc/s//XXX/
will substitute
.Dq XXX
for the pattern
.Dq abc .
.Sh SED FUNCTIONS
In the following list of commands, the maximum number of permissible
addresses for each command is indicated by [0addr], [1addr], or [2addr],
representing zero, one, or two addresses.
.Pp
The argument
.Ar text
consists of one or more lines.
To embed a newline in the text, precede it with a backslash.
Other backslashes in text are deleted and the following character
taken literally.
.Pp
The
.Ic r
and
.Ic w
functions,
as well as the
.Cm w
flag to the
.Ic s
function,
take a
.Ar file
parameter,
which should be separated from the function or flag by whitespace.
Files are created
(or their contents truncated)
before any input processing begins.
.Pp
The
.Ic b ,
.Ic r ,
.Ic s ,
.Ic t ,
.Ic w ,
.Ic y ,
and
.Ic \&:
functions all accept additional arguments.
The synopses below indicate which arguments have to be separated from
the function letters by whitespace characters.
.Pp
Functions can be combined to form a
.Em function list ,
a list of
.Nm
functions each followed by a newline, as follows:
.Bd -literal -offset indent
{ function
  function
  ...
  function
}
.Ed
.Pp
The braces can be preceded and followed by whitespace.
The functions can be preceded by whitespace as well.
.Pp
Functions and function lists may be preceded by an exclamation mark,
in which case they are applied only to lines that are
.Em not
selected by the addresses.
.Bl -tag -width Ds
.It [2addr] Ns Ar function-list
Execute
.Ar function-list
only when the pattern space is selected.
.It Xo [1addr] Ns Ic a Ns \e
.br
.Ar text
.Xc
Write
.Ar text
to standard output immediately before each attempt to read a line of input,
whether by executing the
.Ic N
function or by beginning a new cycle.
.It [2addr] Ns Ic b Bq Ar label
Branch to the
.Ic \&:
function with the specified
.Ar label .
If the label is not specified, branch to the end of the script.
.It Xo [2addr] Ns Ic c Ns \e
.br
.Ar text
.Xc
Delete the pattern space.
With 0 or 1 address or at the end of a 2-address range,
.Ar text
is written to the standard output.
.It [2addr] Ns Ic d
Delete the pattern space and start the next cycle.
.It [2addr] Ns Ic D
Delete the initial segment of the pattern space through the first
newline character and start the next cycle.
.It [2addr] Ns Ic g
Replace the contents of the pattern space with the contents of the
hold space.
.It [2addr] Ns Ic G
Append a newline character followed by the contents of the hold space
to the pattern space.
.It [2addr] Ns Ic h
Replace the contents of the hold space with the contents of the
pattern space.
.It [2addr] Ns Ic H
Append a newline character followed by the contents of the pattern space
to the hold space.
.It Xo [1addr] Ns Ic i Ns \e
.br
.Ar text
.Xc
Write
.Ar text
to the standard output.
.It [2addr] Ns Ic l
(The letter ell.)
Write the pattern space to the standard output in a visually unambiguous
form.
This form is as follows:
.Pp
.Bl -tag -width "carriage-returnXX" -offset indent -compact
.It backslash
\e\e
.It alert
\ea
.It backspace
\eb
.It form-feed
\ef
.It carriage-return
\er
.It tab
\et
.It vertical tab
\ev
.El
.Pp
Non-printable characters are written as three-digit octal numbers (with a
preceding backslash) for each byte in the character (most significant byte
first).
Long lines are folded, with the point of folding indicated by displaying
a backslash followed by a newline.
The end of each line is marked with a
.Ql $ .
.It [2addr] Ns Ic n
Write the pattern space to the standard output if the default output has
not been suppressed, and replace the pattern space with the next line of
input.
.It [2addr] Ns Ic N
Append the next line of input to the pattern space, using an embedded
newline character to separate the appended material from the original
contents.
Note that the current line number changes.
.It [2addr] Ns Ic p
Write the pattern space to standard output.
.It [2addr] Ns Ic P
Write the pattern space, up to the first newline character,
to the standard output.
.It [1addr] Ns Ic q
Branch to the end of the script and quit without starting a new cycle.
.It [1addr] Ns Ic r Ar file
Copy the contents of
.Ar file
to the standard output immediately before the next attempt to read a
line of input.
If
.Ar file
cannot be read for any reason, it is silently ignored and no error
condition is set.
.It [2addr] Ns Ic s Ns / Ns Ar RE Ns / Ns Ar replacement Ns / Ns Ar flags
Substitute the
.Ar replacement
string for the first instance of the regular expression
.Ar RE
in the pattern space.
Any character other than backslash or newline can be used instead of
a slash to delimit the regular expression and the replacement.
Within the regular expression and the replacement,
the delimiter itself can be used as a literal character
if it is preceded by a backslash.
.Pp
An ampersand
.Pq Ql &
appearing in the replacement is replaced by the string matching the
regular expression.
The special meaning of
.Ql &
in this context can be suppressed by preceding it by a backslash.
The string
.Ql \e# ,
where
.Ql #
is a digit, is replaced by the text matched
by the corresponding backreference expression (see
.Xr re_format 7 ) .
.Pp
A line can be split by substituting a newline character into it.
To specify a newline character in the replacement string, precede it with
a backslash.
.Pp
The value of
.Ar flags
in the substitute function is zero or more of the following:
.Bl -tag -width "XXXXXX" -offset indent
.It Ar N
Make the substitution only for the
.Ar N Ap th
occurrence of the regular expression in the pattern space, where
.Ar N
is a positive integer starting with
.Cm 1 No ... Cm 9 .
.It Cm g
Make the substitution for all non-overlapping matches of the
regular expression, not just the first one.
.It Cm p
Write the pattern space to standard output if a replacement was made.
If the replacement string is identical to that which it replaces, it
is still considered to have been a replacement.
.It Cm w Ar file
Append the pattern space to
.Ar file
if a replacement was made.
If the replacement string is identical to that which it replaces, it
is still considered to have been a replacement.
.El
.It [2addr] Ns Ic t Bq Ar label
Branch to the
.Ic \&:
function bearing the
.Ar label
if any substitutions have been made since the
most recent reading of an input line or execution of a
.Ic t
function.
If no label is specified, branch to the end of the script.
.It [2addr] Ns Ic w Ar file
Append the pattern space to the
.Ar file .
.It [2addr] Ns Ic x
Swap the contents of the pattern and hold spaces.
.It [2addr] Ns Ic y Ns / Ns Ar string1 Ns / Ns Ar string2 Ns /
Replace all occurrences of characters in
.Ar string1
in the pattern space with the corresponding characters from
.Ar string2 .
Any character other than a backslash or newline can be used instead of
a slash to delimit the strings.
Within
.Ar string1
and
.Ar string2 ,
a backslash followed by any character other than a newline is that literal
character, and a backslash followed by an
.Sq n
is replaced by a newline character.
.It [0addr] Ns Ic \&: Ns Ar label
This function does nothing; it bears a
.Ar label
to which the
.Ic b
and
.Ic t
commands may branch.
.It [1addr] Ns Ic =
Write the line number to the standard output followed by a newline character.
.It [0addr]
Empty lines are ignored.
.It [0addr] Ns Ic #
The
.Ql #
and the remainder of the line are ignored (treated as a comment), with
the single exception that if the first two characters in the file are
.Ql #n ,
the default output is suppressed.
This is the same as specifying the
.Fl n
option on the command line.
.El
.Sh ENVIRONMENT
.Bl -tag -width COLUMNS
.It Ev COLUMNS
If set to a positive integer,
output from the
.Ic l
function is formatted to the given width in columns.
Otherwise,
.Nm
defaults to the terminal width, or 80 columns if the output is not a terminal.
.El
.Sh EXIT STATUS
.Ex -std sed
.Sh EXAMPLES
The following simulates the
.Xr cat 1
.Fl s
command,
squeezing excess empty lines from standard input:
.Bd -literal -offset indent
$ sed -n '
# Write non-empty lines.
/./ {
    p
    d
    }
# Write a single empty line, then look for more empty lines.
/^$/    p
# Get the next line, discard the held <newline> (empty line),
# and look for more empty lines.
:Empty
/^$/    {
    N
    s/.//
    b Empty
    }
# Write the non-empty line before going back to search
# for the first in a set of empty lines.
    p
\&'
.Ed
.Sh SEE ALSO
.Xr awk 1 ,
.Xr ed 1 ,
.Xr grep 1 ,
.Xr re_format 7
.Sh STANDARDS
The
.Nm
utility is compliant with the
.St -p1003.1-2008
specification.
.Pp
The flags
.Op Fl aEiru
are extensions to that specification.
.Pp
The use of newlines to separate multiple commands on the command line
is non-portable;
the use of newlines to separate multiple commands within a command file
.Pq Fl f Ar command_file
is portable.
.Sh HISTORY
A
.Nm
command appeared in
.At v7 .
.Sh CAVEATS
The use of semicolons to separate multiple commands
is not permitted for the following commands:
.Ic a , b , c ,
.Ic i , r , t ,
.Ic w , \&: ,
and
.Ic # .