path: root/usr.sbin/httpd/Makefile.tmpl

## ====================================================================
## Copyright (c) 1998-1999 The Apache Group.  All rights reserved.
##
## Redistribution and use in source and binary forms, with or without
## modification, are permitted provided that the following conditions
## are met:
##
## 1. Redistributions of source code must retain the above copyright
##    notice, this list of conditions and the following disclaimer.
##
## 2. Redistributions in binary form must reproduce the above copyright
##    notice, this list of conditions and the following disclaimer in
##    the documentation and/or other materials provided with the
##    distribution.
##
## 3. All advertising materials mentioning features or use of this
##    software must display the following acknowledgment:
##    "This product includes software developed by the Apache Group
##    for use in the Apache HTTP server project (http://www.apache.org/)."
##
## 4. The names "Apache Server" and "Apache Group" must not be used to
##    endorse or promote products derived from this software without
##    prior written permission. For written permission, please contact
##    apache@apache.org.
##
## 5. Products derived from this software may not be called "Apache"
##    nor may "Apache" appear in their names without prior written
##    permission of the Apache Group.
##
## 6. Redistributions of any form whatsoever must retain the following
##    acknowledgment:
##    "This product includes software developed by the Apache Group
##    for use in the Apache HTTP server project (http://www.apache.org/)."
##
## THIS SOFTWARE IS PROVIDED BY THE APACHE GROUP ``AS IS'' AND ANY
## EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
## IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
## PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE APACHE GROUP OR
## ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
## SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
## NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
## LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
## HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
## STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
## ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
## OF THE POSSIBILITY OF SUCH DAMAGE.
## ====================================================================
##
## This software consists of voluntary contributions made by many
## individuals on behalf of the Apache Group and was originally based
## on public domain software written at the National Center for
## Supercomputing Applications, University of Illinois, Urbana-Champaign.
## For more information on the Apache Group and the Apache HTTP server
## project, please see <http://www.apache.org/>.
##

##
##  Makefile -- Apache Autoconf-style Interface (APACI)
##              top-level control Makefile for out-of-the-box
##              build and installation procedure.
##
##  Written by Ralf S. Engelschall <rse@apache.org>
##

## ==================================================================
##                              Options
## ==================================================================

#   safe environment
SHELL           = @SHELL@

#   paths to the source tree parts
TOP             = .
SRC             = @SRC@
MKF             = @MKF@
AUX             = @AUX@

#   build tools
CP              = cp
LN              = ln
RM              = rm -f
MKDIR           = $(TOP)/$(AUX)/mkdir.sh
INSTALL         = $(TOP)/$(AUX)/install.sh -c
IFLAGS_PROGRAM  = @IFLAGS_PROGRAM@
IFLAGS_CORE     = @IFLAGS_CORE@
IFLAGS_DSO      = @IFLAGS_DSO@
IFLAGS_SCRIPT   = @IFLAGS_SCRIPT@
IFLAGS_DATA     = @IFLAGS_DATA@
INSTALL_PROGRAM = $(INSTALL) $(IFLAGS_PROGRAM)
INSTALL_CORE    = $(INSTALL) $(IFLAGS_CORE)
INSTALL_DSO     = $(INSTALL) $(IFLAGS_DSO)
INSTALL_SCRIPT  = $(INSTALL) $(IFLAGS_SCRIPT)
INSTALL_DATA    = $(INSTALL) $(IFLAGS_DATA)
PERL            = @PERL@
TAR		= @TAR@
TAROPT		= @TAROPT@

#   installation name of Apache webserver
TARGET          = @TARGET@

#   installation root 
#   (overrideable by package maintainers for
#   rolling packages without bristling the system)
root            =

#   installation paths
prefix          = @prefix@
exec_prefix     = @exec_prefix@
bindir          = @bindir@
sbindir         = @sbindir@
libexecdir      = @libexecdir@
mandir          = @mandir@
sysconfdir      = @sysconfdir@
datadir         = @datadir@
iconsdir        = @iconsdir@
htdocsdir       = @htdocsdir@
cgidir          = @cgidir@
includedir      = @includedir@
localstatedir   = @localstatedir@
runtimedir      = @runtimedir@
logfiledir      = @logfiledir@
proxycachedir   = @proxycachedir@

libexecdir_relative   = @libexecdir_relative@

#   suexec details (optional)
suexec          = @suexec@
suexec_caller   = @suexec_caller@
suexec_docroot  = @suexec_docroot@
suexec_logexec  = @suexec_logexec@
suexec_userdir  = @suexec_userdir@
suexec_uidmin   = @suexec_uidmin@
suexec_gidmin   = @suexec_gidmin@
suexec_safepath = @suexec_safepath@

#  SSL (optional)
ssl = @ssl@

#   some substituted configuration parameters
conf_user        = @conf_user@
conf_group       = @conf_group@
conf_port        = @conf_port@
conf_port_ssl    = @conf_port_ssl@
conf_serveradmin = @conf_serveradmin@
conf_servername  = @conf_servername@

#   usage of src/support stuff
build-support     = @build_support@
install-support   = @install_support@
clean-support     = @clean_support@
distclean-support = @distclean_support@

#   `make certificate' parameters
TYPE =
ALGO =
CRT  =
KEY  =
VIEW =

#   forwarding arguments
MFWD = root=$(root)

## ==================================================================
##                              Targets
## ==================================================================

#   default target
all: build

## ------------------------------------------------------------------
##                           Build Target
## ------------------------------------------------------------------

#   build the package
build:
	@echo "===> $(SRC)"
	@$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) build-std
	@if [ "x$(build-support)" != "x" ]; then \
	    $(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) $(build-support); \
        fi
	@$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) build-certificate
	@touch $(TOP)/$(SRC)/.apaci.build.ok
	@echo "<=== $(SRC)"

#   the non-verbose variant for package maintainers
build-quiet:
	@$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) QUIET=1 build

#   build the standard stuff
build-std:
	@cd $(TOP)/$(SRC); $(MAKE) $(MFLAGS) SDP=$(SRC)/ all

#   build the additional support stuff
build-support:
	@echo "===> $(SRC)/support"; \
	cd $(TOP)/$(SRC)/support; $(MAKE) $(MFLAGS) all; \
	if [ ".$(suexec)" = .1 ]; then \
	    $(MAKE) $(MFLAGS) \
		EXTRA_CFLAGS='\
			-DHTTPD_USER=\"$(suexec_caller)\" \
			-DUID_MIN=$(suexec_uidmin) \
			-DGID_MIN=$(suexec_gidmin) \
			-DUSERDIR_SUFFIX=\"$(suexec_userdir)\" \
			-DLOG_EXEC=\"$(suexec_logexec)\" \
			-DDOC_ROOT=\"$(suexec_docroot)\" \
			-DSAFE_PATH=\"$(suexec_safepath)\" ' \
		suexec; \
	fi; \
	echo "<=== $(SRC)/support"

#   SSL certificate generation
build-certificate:
	-@if [ ".$(ssl)" = .1 ]; then \
		if [ ".`grep '(SKIPME)' $(TOP)/conf/ssl.crt/server.crt`" != . ]; then \
			if [ ".$(QUIET)" != .1 ]; then \
				echo "+---------------------------------------------------------------------+"; \
				echo "| Before you install the package you now should prepare the SSL       |"; \
				echo "| certificate system by running the 'make certificate' command.       |"; \
				echo "| For different situations the following variants are provided:       |"; \
				echo "|                                                                     |"; \
				echo "| % make certificate TYPE=dummy    (dummy self-signed Snake Oil cert) |"; \
				echo "| % make certificate TYPE=test     (test cert signed by Snake Oil CA) |"; \
				echo "| % make certificate TYPE=custom   (custom cert signed by own CA)     |"; \
				echo "| % make certificate TYPE=existing (existing cert)                    |"; \
				echo "|        CRT=/path/to/your.crt [KEY=/path/to/your.key]                |"; \
				echo "|                                                                     |"; \
				echo "| Use TYPE=dummy    when you're a  vendor package maintainer,         |"; \
				echo "| the TYPE=test     when you're an admin but want to do tests only,   |"; \
				echo "| the TYPE=custom   when you're an admin willing to run a real server |"; \
				echo "| and TYPE=existing when you're an admin who upgrades a server.       |"; \
				echo "| (The default is TYPE=test)                                          |"; \
				echo "|                                                                     |"; \
				echo "| Additionally add ALGO=RSA (default) or ALGO=DSA to select           |"; \
				echo "| the signature algorithm used for the generated certificate.         |"; \
				echo "|                                                                     |"; \
				echo "| Use 'make certificate VIEW=1' to display the generated data.        |"; \
				echo "|                                                                     |"; \
				echo "| Thanks for using Apache & mod_ssl.       Ralf S. Engelschall        |"; \
				echo "|                                          rse@engelschall.com        |"; \
				echo "|                                          www.engelschall.com        |"; \
				echo "+---------------------------------------------------------------------+"; \
			fi \
		fi \
	fi

certificate:
	@cd $(TOP)/$(SRC); $(MAKE) $(MFLAGS) certificate TYPE="$(TYPE)" ALGO="$(ALGO)" CRT="$(CRT)" KEY="$(KEY)" VIEW="$(VIEW)"

## ------------------------------------------------------------------
##                       Installation Targets
## ------------------------------------------------------------------

#   indirection step to avoid conflict with INSTALL document 
#   on case-insenstive filesystems, for instance on OS/2
install: install-all

#   the install target for installing the complete Apache
#   package. This is implemented by running subtargets for the
#   separate parts of the installation process.
install-all:
	@if [ ! -f $(TOP)/$(SRC)/.apaci.build.ok ]; then \
		$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) build; \
	else \
		:; \
	fi
	@$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) \
		install-mktree install-programs $(install-support) \
		install-include install-data install-config
	-@$(RM) $(SRC)/.apaci.install.tmp
	-@$(RM) $(SRC)/.apaci.install.conf
	-@if [ ".$(QUIET)" != .1 ]; then \
		if [ ".$(TARGET)" = .httpd ]; then \
			apachectl='apachectl'; \
		else \
			apachectl="$(TARGET)ctl"; \
		fi; \
		echo "+--------------------------------------------------------+"; \
		echo "| You now have successfully built and installed the      |"; \
		echo "| Apache 1.3 HTTP server. To verify that Apache actually |"; \
		echo "| works correctly you now should first check the         |"; \
		echo "| (initially created or preserved) configuration files   |"; \
		echo "|                                                        |"; \
		echo "|   $(sysconfdir)/$(TARGET).conf"; \
		echo "|                                                        |"; \
		echo "| and then you should be able to immediately fire up     |"; \
		echo "| Apache the first time by running:                      |"; \
		echo "|                                                        |"; \
		echo "|   $(sbindir)/$${apachectl} start"; \
		echo "|                                                        |"; \
		echo "| Or when you want to run it with SSL enabled use:       |"; \
		echo "|                                                        |"; \
		echo "|   $(sbindir)/$${apachectl} startssl"; \
		echo "|                                                        |"; \
		echo "| Thanks for using Apache.       The Apache Group        |"; \
		echo "|                                http://www.apache.org/  |"; \
		echo "+--------------------------------------------------------+"; \
	fi

#   the non-verbose variant for package maintainers
install-quiet:
	@$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) QUIET=1 install-all

#   create the installation tree
install-mktree:
	@echo "===> [mktree: Creating Apache installation tree]"
	$(MKDIR) $(root)$(bindir)
	$(MKDIR) $(root)$(sbindir)
	$(MKDIR) $(root)$(libexecdir)
	$(MKDIR) $(root)$(mandir)/man1
	$(MKDIR) $(root)$(mandir)/man8
	$(MKDIR) $(root)$(sysconfdir)
	$(MKDIR) $(root)$(sysconfdir)/ssl.crt
	$(MKDIR) $(root)$(sysconfdir)/ssl.crl
	$(MKDIR) $(root)$(sysconfdir)/ssl.csr
	$(MKDIR) $(root)$(sysconfdir)/ssl.key
	$(MKDIR) $(root)$(sysconfdir)/ssl.prm
	$(MKDIR) $(root)$(htdocsdir)
	$(MKDIR) $(root)$(iconsdir)
	$(MKDIR) $(root)$(cgidir)
	$(MKDIR) $(root)$(includedir)
	$(MKDIR) $(root)$(includedir)/xml
	$(MKDIR) $(root)$(runtimedir)
	$(MKDIR) $(root)$(logfiledir)
	$(MKDIR) $(root)$(proxycachedir)
	-@if [ "x`$(AUX)/getuid.sh`" = "x0" ]; then \
		echo "chown $(conf_user) $(root)$(proxycachedir)"; \
		chown $(conf_user) $(root)$(proxycachedir); \
		echo "chgrp $(conf_group) $(root)$(proxycachedir)"; \
		chgrp $(conf_group) $(root)$(proxycachedir); \
	fi
	@echo "<=== [mktree]"

#   install the server program and optionally corresponding
#   shared object files.
install-programs:
	@echo "===> [programs: Installing Apache $(TARGET) program and shared objects]"
	-@if [ ".`grep '^[ 	]*AddModule.*mod_so\.o' $(TOP)/$(SRC)/Configuration.apaci`" != . ]; then \
		echo "$(INSTALL_CORE) $(TOP)/$(SRC)/$(TARGET) $(root)$(sbindir)/$(TARGET)"; \
		$(INSTALL_CORE) $(TOP)/$(SRC)/$(TARGET) $(root)$(sbindir)/$(TARGET); \
		SHLIB_EXPORT_FILES="`grep '^SHLIB_EXPORT_FILES=' $(TOP)/$(SRC)/Makefile | sed -e 's:^.*=::'`"; \
		if [ ".$${SHLIB_EXPORT_FILES}" != . ]; then \
			$(CP) $(TOP)/$(SRC)/support/httpd.exp $(root)$(libexecdir)/; \
			chmod 644 $(root)$(libexecdir)/httpd.exp; \
		fi; \
	else \
		echo "$(INSTALL_PROGRAM) $(TOP)/$(SRC)/$(TARGET) $(root)$(sbindir)/$(TARGET)"; \
		$(INSTALL_PROGRAM) $(TOP)/$(SRC)/$(TARGET) $(root)$(sbindir)/$(TARGET); \
	fi
	-@if [ ".`grep 'SUBTARGET=target_shared' $(TOP)/$(SRC)/Makefile`" != . ]; then \
		SHLIB_SUFFIX_NAME="`grep '^SHLIB_SUFFIX_NAME=' $(TOP)/$(SRC)/Makefile | sed -e 's:^.*=::'`"; \
		SHLIB_SUFFIX_LIST="`grep '^SHLIB_SUFFIX_LIST=' $(TOP)/$(SRC)/Makefile | sed -e 's:^.*=::'`"; \
		echo "$(INSTALL_CORE) $(TOP)/$(SRC)/lib$(TARGET).ep $(root)$(libexecdir)/lib$(TARGET).ep"; \
		$(INSTALL_CORE) $(TOP)/$(SRC)/lib$(TARGET).ep $(root)$(libexecdir)/lib$(TARGET).ep; \
		echo "$(INSTALL_DSO) $(TOP)/$(SRC)/lib$(TARGET).$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME}"; \
		$(INSTALL_DSO) $(TOP)/$(SRC)/lib$(TARGET).$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME}; \
		if [ ".$${SHLIB_SUFFIX_LIST}" != . ]; then \
			echo "$(RM) $(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME}.*"; \
			$(RM) $(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME}.*; \
			for suffix in $${SHLIB_SUFFIX_LIST} ""; do \
				[ ".$${suffix}" = . ] && continue; \
				echo "$(LN) $(root)$(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME}.$${suffix}"; \
				$(LN) $(root)$(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME}.$${suffix}; \
			done; \
		fi; \
	fi
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/httpd.8 $(root)$(mandir)/man8/$(TARGET).8
	-@$(RM) $(SRC)/.apaci.install.conf; touch $(SRC)/.apaci.install.conf
	-@if [ ".`grep '^[ 	]*SharedModule' $(TOP)/$(SRC)/Configuration.apaci`" != . ]; then \
		for mod in `egrep '^[ 	]*SharedModule' $(TOP)/$(SRC)/Configuration.apaci |\
	                sed -e 's/^[ 	]*SharedModule[ 	]*//'`; do \
			file=`echo $${mod} | sed -e 's;^.*/\([^/]*\);\1;'`; \
			echo "$(INSTALL_DSO) $(TOP)/$(SRC)/$${mod} $(root)$(libexecdir)/$${file}"; \
			$(INSTALL_DSO) $(TOP)/$(SRC)/$${mod} $(root)$(libexecdir)/$${file}; \
			name=`$(TOP)/$(AUX)/fmn.sh $(TOP)/$(SRC)/$${mod}`; \
			if [ ".$$name" = .ssl_module ]; then \
				echo "<IfDefine SSL>" >>$(SRC)/.apaci.install.conf; \
			fi; \
			echo dummy | awk '{ printf("LoadModule %-18s %s\n", modname, modpath); }' \
			modname="$${name}" modpath="$(libexecdir_relative)$${file}" >>$(SRC)/.apaci.install.conf; \
			if [ ".$$name" = .ssl_module ]; then \
				echo "</IfDefine>" >>$(SRC)/.apaci.install.conf; \
			fi; \
		done; \
		echo "" >>$(SRC)/.apaci.install.conf; \
		echo "#  Reconstruction of the complete module list from all available modules" >>$(SRC)/.apaci.install.conf; \
		echo "#  (static and shared ones) to achieve correct module execution order." >>$(SRC)/.apaci.install.conf; \
		echo "#  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]" >>$(SRC)/.apaci.install.conf; \
		echo "ClearModuleList" >>$(SRC)/.apaci.install.conf; \
		for mod in `egrep "^[ 	]*(Add|Shared)Module" $(SRC)/Configuration.apaci |\
		            sed	-e 's:[ 	]*SharedModule::' \
		                -e 's:[ 	]*AddModule::' \
		                -e 's:modules/[^/]*/::' \
		                -e 's:[ 	]lib: mod_:' \
		                -e 's:\.[soam]*$$:.c:'`; do \
			if [ ".$$mod" = .mod_ssl.c ]; then \
				echo "<IfDefine SSL>" >>$(SRC)/.apaci.install.conf; \
			fi; \
			echo "AddModule $$mod" >>$(SRC)/.apaci.install.conf; \
			if [ ".$$mod" = .mod_ssl.c ]; then \
				echo "</IfDefine>" >>$(SRC)/.apaci.install.conf; \
			fi; \
		done; \
	fi
	@echo "<=== [programs]"

#   install the support programs and scripts
install-support:
	@echo "===> [support: Installing Apache support programs and scripts]"
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/ab $(root)$(sbindir)/ab
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/ab.8 $(root)$(mandir)/man8/ab.8
	@if [ ".$(TARGET)" = .httpd ]; then \
		apachectl='apachectl'; \
	else \
		apachectl="$(TARGET)ctl"; \
	fi; \
	echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apachectl[*] $(root)$(sbindir)/$${apachectl}"; \
	sed -e 's;PIDFILE=.*;PIDFILE=$(runtimedir)/$(TARGET).pid;' \
		-e 's;HTTPD=.*;HTTPD=$(sbindir)/$(TARGET);' \
		< $(TOP)/$(SRC)/support/apachectl > $(TOP)/$(SRC)/.apaci.install.tmp && \
		$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sbindir)/$${apachectl}; \
	echo "$(INSTALL_DATA) $(TOP)/$(SRC)/support/apachectl.8 $(root)$(mandir)/man8/$${apachectl}.8"; \
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/apachectl.8 $(root)$(mandir)/man8/$${apachectl}.8
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/htpasswd $(root)$(bindir)/htpasswd
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/htpasswd.1 $(root)$(mandir)/man1/htpasswd.1
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/htdigest $(root)$(bindir)/htdigest
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/htdigest.1 $(root)$(mandir)/man1/htdigest.1
	@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/dbmmanage[*] $(root)$(bindir)/dbmmanage"; \
	sed -e 's;^#!/.*;#!$(PERL);' \
		< $(TOP)/$(SRC)/support/dbmmanage > $(TOP)/$(SRC)/.apaci.install.tmp && \
		$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(bindir)/dbmmanage
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/dbmmanage.1 $(root)$(mandir)/man1/dbmmanage.1
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/logresolve $(root)$(sbindir)/logresolve
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/logresolve.8 $(root)$(mandir)/man8/logresolve.8
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/rotatelogs $(root)$(sbindir)/rotatelogs
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/rotatelogs.8 $(root)$(mandir)/man8/rotatelogs.8
	@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apxs[*] $(root)$(sbindir)/apxs"; \
	sed -e 's;^#!/.*;#!$(PERL);' \
		-e 's;\@prefix\@;$(prefix);' \
		-e 's;\@sbindir\@;$(sbindir);' \
		-e 's;\@libexecdir\@;$(libexecdir);' \
		-e 's;\@includedir\@;$(includedir);' \
		-e 's;\@sysconfdir\@;$(sysconfdir);' \
		< $(TOP)/$(SRC)/support/apxs > $(TOP)/$(SRC)/.apaci.install.tmp && \
		$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sbindir)/apxs
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/apxs.8 $(root)$(mandir)/man8/apxs.8
	-@if [ ".$(suexec)" = .1 ]; then \
	    echo "$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/suexec $(root)$(sbindir)/suexec"; \
	    $(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/suexec $(root)$(sbindir)/suexec; \
	    echo "chown root $(root)$(sbindir)/suexec"; \
	    chown root $(root)$(sbindir)/suexec; \
	    echo "chmod 4711 $(root)$(sbindir)/suexec"; \
	    chmod 4711 $(root)$(sbindir)/suexec; \
	    echo "$(INSTALL_DATA) $(TOP)/$(SRC)/support/suexec.8 $(root)$(mandir)/man8/suexec.8"; \
	    $(INSTALL_DATA) $(TOP)/$(SRC)/support/suexec.8 $(root)$(mandir)/man8/suexec.8; \
	fi
	@echo "<=== [support]"

#   install the support programs and scripts for binary distribution
install-binsupport:
	@echo "===> [support: Installing Apache support programs and scripts for binary distribution]"
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/ab $(root)$(sbindir)/ab
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/ab.8 $(root)$(mandir)/man8/ab.8
	@if [ ".$(TARGET)" = .httpd ]; then \
		apachectl='apachectl'; \
	else \
		apachectl="$(TARGET)ctl"; \
	fi; \
	echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apachectl[*] $(root)$(sbindir)/$${apachectl}"; \
	sed -e 's;PIDFILE=.*;PIDFILE=$(runtimedir)/$(TARGET).pid;' \
		-e 's;HTTPD=.*;HTTPD=$(sbindir)/$(TARGET);' \
		< $(TOP)/$(SRC)/support/apachectl > $(TOP)/$(SRC)/.apaci.install.tmp && \
		$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sbindir)/$${apachectl}; \
	echo "$(INSTALL_DATA) $(TOP)/$(SRC)/support/apachectl.8 $(root)$(mandir)/man8/$${apachectl}.8"; \
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/apachectl.8 $(root)$(mandir)/man8/$${apachectl}.8
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/htpasswd $(root)$(bindir)/htpasswd
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/htpasswd.1 $(root)$(mandir)/man1/htpasswd.1
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/htdigest $(root)$(bindir)/htdigest
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/htdigest.1 $(root)$(mandir)/man1/htdigest.1
	@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/dbmmanage[*] $(root)$(bindir)/dbmmanage"; \
	$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/dbmmanage $(root)$(bindir)/dbmmanage
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/dbmmanage.1 $(root)$(mandir)/man1/dbmmanage.1
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/logresolve $(root)$(sbindir)/logresolve
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/logresolve.8 $(root)$(mandir)/man8/logresolve.8
	$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/rotatelogs $(root)$(sbindir)/rotatelogs
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/rotatelogs.8 $(root)$(mandir)/man8/rotatelogs.8
	@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apxs[*] $(root)$(sbindir)/apxs"; \
	$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apxs $(root)$(sbindir)/apxs
	$(INSTALL_DATA) $(TOP)/$(SRC)/support/apxs.8 $(root)$(mandir)/man8/apxs.8
	-@if [ ".$(suexec)" = .1 ]; then \
	    echo "$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/suexec $(root)$(sbindir)/suexec"; \
	    $(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/suexec $(root)$(sbindir)/suexec; \
	    echo "chown root $(root)$(sbindir)/suexec"; \
	    chown root $(root)$(sbindir)/suexec; \
	    echo "chmod 4711 $(root)$(sbindir)/suexec"; \
	    chmod 4711 $(root)$(sbindir)/suexec; \
	    echo "$(INSTALL_DATA) $(TOP)/$(SRC)/support/suexec.8 $(root)$(mandir)/man8/suexec.8"; \
	    $(INSTALL_DATA) $(TOP)/$(SRC)/support/suexec.8 $(root)$(mandir)/man8/suexec.8; \
	fi
	@echo "<=== [support]"

#   install the Apache C header files
install-include:
	@echo "===> [include: Installing Apache C header files]"
	$(CP) $(TOP)/$(SRC)/include/*.h $(root)$(includedir)/
	$(CP) $(TOP)/$(SRC)/lib/expat-lite/*.h $(root)$(includedir)/xml/
	@osdir=`grep '^OSDIR=' $(TOP)/$(SRC)/Makefile.config | sed -e 's:^OSDIR=.*/os/:os/:'`; \
		echo "$(CP) $(TOP)/$(SRC)/$${osdir}/os.h $(root)$(includedir)/"; \
		$(CP) $(TOP)/$(SRC)/$${osdir}/os.h $(root)$(includedir)/; \
		echo "$(CP) $(TOP)/$(SRC)/$${osdir}/os-inline.c $(root)$(includedir)/"; \
		$(CP) $(TOP)/$(SRC)/$${osdir}/os-inline.c $(root)$(includedir)/
	chmod 644 $(root)$(includedir)/*.h $(root)$(includedir)/xml/*.h
	@echo "<=== [include]"

#   create an initial document root containing the Apache manual,
#   icons and distributed CGI scripts.
install-data:
	@echo "===> [data: Installing initial data files]"
	-@if [ -f $(root)$(htdocsdir)/index.html ]; then \
		echo "[PRESERVING EXISTING DATA SUBDIR: $(root)$(htdocsdir)/]"; \
	else \
		echo "Copying tree $(TOP)/htdocs/ -> $(root)$(htdocsdir)/"; \
		(cd $(TOP)/htdocs/ && $(TAR) $(TAROPT) - *) |\
		(cd $(root)$(htdocsdir)/ && $(TAR) -xf -); \
		find $(root)$(htdocsdir)/ -type d -exec chmod a+rx {} \; ; \
		find $(root)$(htdocsdir)/ -type f -exec chmod a+r {} \; ; \
	fi
	-@if [ -f $(root)$(cgidir)/printenv ]; then \
		echo "[PRESERVING EXISTING DATA SUBDIR: $(root)$(cgidir)/]"; \
	else \
		for script in printenv test-cgi; do \
			cat $(TOP)/cgi-bin/$${script} |\
			sed -e 's;^#!/.*perl;#!$(PERL);' \
			> $(TOP)/$(SRC)/.apaci.install.tmp; \
			echo "$(INSTALL_DATA) $(TOP)/conf/$${script}[*] $(root)$(cgidir)/$${script}"; \
			$(INSTALL_DATA) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(cgidir)/$${script}; \
		done; \
	fi
	@echo "Copying tree $(TOP)/icons/ -> $(root)$(iconsdir)/"; \
	(cd $(TOP)/icons/ && $(TAR) $(TAROPT) - *) |\
	(cd $(root)$(iconsdir)/ && $(TAR) -xf -); \
	find $(root)$(iconsdir)/ -type d -exec chmod a+rx {} \; ;\
	find $(root)$(iconsdir)/ -type f -exec chmod a+r {} \;
	@echo "<=== [data]"

#   create the initial configuration by providing default files
#   and initial config files while preserving existing ones.
install-config:
	@echo "===> [config: Installing Apache configuration files]"
	-@for conf in httpd.conf access.conf srm.conf; do \
		if [ .$$conf = .httpd.conf ]; then \
			target_conf="$(TARGET).conf"; \
		else \
			target_conf="$$conf"; \
		fi; \
		if [ ".$(TARGET)" = .httpd ]; then \
			target_prefix=""; \
		else \
			target_prefix="$(TARGET)_"; \
		fi; \
		(echo "##"; \
		 echo "## $${target_conf} -- Apache HTTP server configuration file"; \
		 echo "##"; \
		 echo ""; \
		 cat $(TOP)/conf/$${conf}-dist ) |\
		 sed -e '/# LoadModule/r $(TOP)/$(SRC)/.apaci.install.conf' \
			-e "s;logs/ssl_mutex;$(runtimedir)/$${target_prefix}ssl_mutex;" \
			-e "s;logs/ssl_scache;$(runtimedir)/$${target_prefix}ssl_scache;" \
			-e "s;logs/ssl_engine_log;$(logfiledir)/$${target_prefix}ssl_engine_log;" \
			-e "s;logs/ssl_request_log;$(logfiledir)/$${target_prefix}ssl_request_log;" \
			-e 's;@@ServerRoot@@/conf/ssl.crt;$(sysconfdir)/ssl.crt;' \
			-e 's;@@ServerRoot@@/conf/ssl.crl;$(sysconfdir)/ssl.crl;' \
			-e 's;@@ServerRoot@@/conf/ssl.csr;$(sysconfdir)/ssl.csr;' \
			-e 's;@@ServerRoot@@/conf/ssl.key;$(sysconfdir)/ssl.key;' \
			-e 's;@@ServerRoot@@/conf/ssl.prm;$(sysconfdir)/ssl.prm;' \
			-e 's;@@ServerRoot@@/htdocs;$(htdocsdir);' \
			-e 's;@@ServerRoot@@/icons;$(iconsdir);' \
			-e 's;@@ServerRoot@@/cgi-bin;$(cgidir);' \
			-e 's;@@ServerRoot@@/proxy;$(proxycachedir);' \
			-e 's;@@ServerRoot@@;$(prefix);g' \
			-e 's;httpd\.conf;$(TARGET).conf;' \
			-e 's;logs/accept\.lock;$(runtimedir)/$(TARGET).lock;' \
			-e 's;logs/apache_runtime_status;$(runtimedir)/$(TARGET).scoreboard;' \
			-e 's;logs/httpd\.pid;$(runtimedir)/$(TARGET).pid;' \
			-e "s;logs/access_log;$(logfiledir)/$${target_prefix}access_log;" \
			-e "s;logs/error_log;$(logfiledir)/$${target_prefix}error_log;" \
			-e "s;logs/referer_log;$(logfiledir)/$${target_prefix}referer_log;" \
			-e "s;logs/agent_log;$(logfiledir)/$${target_prefix}agent_log;" \
			-e 's;conf/magic;$(sysconfdir)/magic;' \
			-e 's;conf/mime\.types;$(sysconfdir)/mime.types;' \
			-e 's;User nobody;User $(conf_user);' \
			-e 's;Group #-1;Group $(conf_group);' \
			-e 's;Port 80;Port $(conf_port);' \
			-e 's;Listen 80;Listen $(conf_port);' \
			-e 's;Listen 443;Listen $(conf_port_ssl);' \
			-e 's;ServerAdmin you@your.address;ServerAdmin $(conf_serveradmin);' \
			-e 's;ServerName new.host.name;ServerName $(conf_servername);' \
			-e 's;VirtualHost _default_:443;VirtualHost _default_:$(conf_port_ssl);' \
        	> $(TOP)/$(SRC)/.apaci.install.tmp && \
		echo "$(INSTALL_DATA) $(TOP)/conf/$${conf}-dist[*] $(root)$(sysconfdir)/$${target_conf}.default"; \
		$(INSTALL_DATA) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sysconfdir)/$${target_conf}.default; \
		if [ ! -f "$(root)$(sysconfdir)/$${target_conf}" ]; then \
			echo "$(INSTALL_DATA) $(TOP)/conf/$${conf}-dist[*] $(root)$(sysconfdir)/$${target_conf}"; \
			$(INSTALL_DATA) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sysconfdir)/$${target_conf}; \
		else \
			echo "[PRESERVING EXISTING CONFIG FILE: $(root)$(sysconfdir)/$${target_conf}]"; \
		fi; \
	done
	-@for conf in mime.types magic; do \
		echo "$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}.default"; \
		$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}.default; \
		if [ ! -f "$(root)$(sysconfdir)/$${conf}" ]; then \
			echo "$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}"; \
			$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}; \
		else \
			echo "[PRESERVING EXISTING CONFIG FILE: $(root)$(sysconfdir)/$${conf}]"; \
		fi; \
	done
	-@if [ ".$(ssl)" = .1 ]; then \
		echo "chmod 755 $(root)$(sysconfdir)/ssl.crt"; \
		chmod 755 $(root)$(sysconfdir)/ssl.crt; \
		echo "chmod 755 $(root)$(sysconfdir)/ssl.crl"; \
		chmod 755 $(root)$(sysconfdir)/ssl.crl; \
		echo "chmod 755 $(root)$(sysconfdir)/ssl.csr"; \
		chmod 755 $(root)$(sysconfdir)/ssl.csr; \
		echo "chmod 700 $(root)$(sysconfdir)/ssl.key"; \
		chmod 700 $(root)$(sysconfdir)/ssl.key; \
		echo "chmod 755 $(root)$(sysconfdir)/ssl.prm"; \
		chmod 755 $(root)$(sysconfdir)/ssl.prm; \
		if [ ! -f "$(root)$(sysconfdir)/ssl.crt/README.CRT" ]; then \
			echo "$(INSTALL_DATA) $(TOP)/conf/ssl.crt/README.CRT $(root)$(sysconfdir)/ssl.crt/README.CRT"; \
			$(INSTALL) $(TOP)/conf/ssl.crt/README.CRT $(root)$(sysconfdir)/ssl.crt/README.CRT; \
			echo "$(INSTALL_DATA) $(TOP)/conf/ssl.crt/Makefile $(root)$(sysconfdir)/ssl.crt/Makefile"; \
			$(INSTALL) $(TOP)/conf/ssl.crt/Makefile $(root)$(sysconfdir)/ssl.crt/Makefile; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.crt/ca-bundle.crt $(root)$(sysconfdir)/ssl.crt/ca-bundle.crt"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.crt/ca-bundle.crt $(root)$(sysconfdir)/ssl.crt/ca-bundle.crt; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.crt/snakeoil-ca-rsa.crt $(root)$(sysconfdir)/ssl.crt/snakeoil-ca-rsa.crt"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.crt/snakeoil-ca-rsa.crt $(root)$(sysconfdir)/ssl.crt/snakeoil-ca-rsa.crt; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.crt/snakeoil-ca-dsa.crt $(root)$(sysconfdir)/ssl.crt/snakeoil-ca-dsa.crt"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.crt/snakeoil-ca-dsa.crt $(root)$(sysconfdir)/ssl.crt/snakeoil-ca-dsa.crt; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.crt/snakeoil-rsa.crt $(root)$(sysconfdir)/ssl.crt/snakeoil-rsa.crt"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.crt/snakeoil-rsa.crt $(root)$(sysconfdir)/ssl.crt/snakeoil-rsa.crt; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.crt/snakeoil-dsa.crt $(root)$(sysconfdir)/ssl.crt/snakeoil-dsa.crt"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.crt/snakeoil-dsa.crt $(root)$(sysconfdir)/ssl.crt/snakeoil-dsa.crt; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.crt/server.crt $(root)$(sysconfdir)/ssl.crt/server.crt"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.crt/server.crt $(root)$(sysconfdir)/ssl.crt/server.crt; \
			if [ -f "$(TOP)/conf/ssl.crt/ca.crt" ]; then \
				echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.crt/ca.crt $(root)$(sysconfdir)/ssl.crt/ca.crt"; \
				$(INSTALL) -m 400 $(TOP)/conf/ssl.crt/ca.crt $(root)$(sysconfdir)/ssl.crt/ca.crt; \
			fi; \
		else \
			echo "[PRESERVING EXISTING CERTIFICATE FILES: $(root)$(sysconfdir)/ssl.crt/*]"; \
		fi; \
		echo "Updating hash symlinks in $(root)$(sysconfdir)/ssl.crt/:"; \
		SSL_PROGRAM="`grep '^SSL_PROGRAM=' $(TOP)/$(SRC)/Makefile.config | sed -e 's:^.*=::'`"; \
		(cd $(root)$(sysconfdir)/ssl.crt/ && $(MAKE) $(MFLAGS) SSL_PROGRAM=$$SSL_PROGRAM); \
		if [ ! -f "$(root)$(sysconfdir)/ssl.csr/README.CSR" ]; then \
			echo "$(INSTALL_DATA) $(TOP)/conf/ssl.csr/README.CSR $(root)$(sysconfdir)/ssl.csr/README.CSR"; \
			$(INSTALL) $(TOP)/conf/ssl.csr/README.CSR $(root)$(sysconfdir)/ssl.csr/README.CSR; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.csr/server.csr $(root)$(sysconfdir)/ssl.csr/server.csr"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.csr/server.csr $(root)$(sysconfdir)/ssl.csr/server.csr; \
		else \
			echo "[PRESERVING EXISTING CSR FILES: $(root)$(sysconfdir)/ssl.csr/*]"; \
		fi; \
		if [ ! -f "$(root)$(sysconfdir)/ssl.crl/README.CRL" ]; then \
			echo "$(INSTALL_DATA) $(TOP)/conf/ssl.crl/README.CRL $(root)$(sysconfdir)/ssl.crl/README.CRL"; \
			$(INSTALL) $(TOP)/conf/ssl.crl/README.CRL $(root)$(sysconfdir)/ssl.crl/README.CRL; \
			echo "$(INSTALL_DATA) $(TOP)/conf/ssl.crl/Makefile $(root)$(sysconfdir)/ssl.crl/Makefile"; \
			$(INSTALL) $(TOP)/conf/ssl.crl/Makefile $(root)$(sysconfdir)/ssl.crl/Makefile; \
		else \
			echo "[PRESERVING EXISTING CRL FILES: $(root)$(sysconfdir)/ssl.crl/*]"; \
		fi; \
		if [ ! -f "$(root)$(sysconfdir)/ssl.key/README.KEY" ]; then \
			echo "$(INSTALL_DATA) $(TOP)/conf/ssl.key/README.KEY $(root)$(sysconfdir)/ssl.key/README.KEY"; \
			$(INSTALL) $(TOP)/conf/ssl.key/README.KEY $(root)$(sysconfdir)/ssl.key/README.KEY; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.key/snakeoil-ca-rsa.key $(root)$(sysconfdir)/ssl.key/snakeoil-ca-rsa.key"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.key/snakeoil-ca-rsa.key $(root)$(sysconfdir)/ssl.key/snakeoil-ca-rsa.key; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.key/snakeoil-ca-dsa.key $(root)$(sysconfdir)/ssl.key/snakeoil-ca-dsa.key"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.key/snakeoil-ca-dsa.key $(root)$(sysconfdir)/ssl.key/snakeoil-ca-dsa.key; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.key/snakeoil-rsa.key $(root)$(sysconfdir)/ssl.key/snakeoil-rsa.key"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.key/snakeoil-rsa.key $(root)$(sysconfdir)/ssl.key/snakeoil-rsa.key; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.key/snakeoil-dsa.key $(root)$(sysconfdir)/ssl.key/snakeoil-dsa.key"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.key/snakeoil-dsa.key $(root)$(sysconfdir)/ssl.key/snakeoil-dsa.key; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.key/server.key $(root)$(sysconfdir)/ssl.key/server.key"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.key/server.key $(root)$(sysconfdir)/ssl.key/server.key; \
			if [ -f "$(TOP)/conf/ssl.key/ca.key" ]; then \
				echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.key/ca.key $(root)$(sysconfdir)/ssl.key/ca.key"; \
				$(INSTALL) -m 400 $(TOP)/conf/ssl.key/ca.key $(root)$(sysconfdir)/ssl.key/ca.key; \
			fi; \
		else \
			echo "[PRESERVING EXISTING KEY FILES: $(root)$(sysconfdir)/ssl.key/*]"; \
		fi; \
		if [ ! -f "$(root)$(sysconfdir)/ssl.prm/README.PRM" ]; then \
			echo "$(INSTALL_DATA) $(TOP)/conf/ssl.prm/README.PRM $(root)$(sysconfdir)/ssl.prm/README.PRM"; \
			$(INSTALL) $(TOP)/conf/ssl.prm/README.PRM $(root)$(sysconfdir)/ssl.prm/README.PRM; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.prm/snakeoil-ca-dsa.prm $(root)$(sysconfdir)/ssl.prm/snakeoil-ca-dsa.prm"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.prm/snakeoil-ca-dsa.prm $(root)$(sysconfdir)/ssl.prm/snakeoil-ca-dsa.prm; \
			echo "$(INSTALL_DATA) -m 400 $(TOP)/conf/ssl.prm/snakeoil-dsa.prm $(root)$(sysconfdir)/ssl.prm/snakeoil-dsa.prm"; \
			$(INSTALL) -m 400 $(TOP)/conf/ssl.prm/snakeoil-dsa.prm $(root)$(sysconfdir)/ssl.prm/snakeoil-dsa.prm; \
		else \
			echo "[PRESERVING EXISTING PRM FILES: $(root)$(sysconfdir)/ssl.prm/*]"; \
		fi; \
	fi
	@echo "<=== [config]"


## ------------------------------------------------------------------
##                       Cleanup Targets
## ------------------------------------------------------------------

#   cleanup the source tree by removing anything which was
#   created by the build target
clean:
	@echo "===> $(SRC)"
	@$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) clean-std $(clean-support)
	@echo "<=== $(SRC)"
	@$(RM) $(TOP)/$(SRC)/.apaci.build.ok

#   clean the standard stuff
clean-std:
	@cd $(TOP)/$(SRC); $(MAKE) $(MFLAGS) SDP=$(SRC)/ clean

#   clean additional support stuff
clean-support:
	@echo "===> $(SRC)/support"; \
	cd $(TOP)/$(SRC)/support; $(MAKE) $(MFLAGS) clean; \
	if [ ".$(suexec)" = .1 ]; then \
		echo "$(RM) suexec"; \
		$(RM) suexec; \
	fi; \
	echo "<=== $(SRC)/support"

#   cleanup the source tree by removing anything which was
#   created by the configure step and the build target.
#   When --shadow is used we just remove the complete shadow tree.
distclean:
	@if [ ".$(SRC)" = .src ]; then \
		$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) distclean-normal; \
	else \
		$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) distclean-shadow; \
	fi

distclean-normal:
	@echo "===> $(SRC)"
	@$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) distclean-std $(distclean-support)
	@echo "<=== $(SRC)"
	-$(RM) $(SRC)/Configuration.apaci
	-$(RM) $(SRC)/apaci
	@$(RM) $(SRC)/.apaci.build.ok
	-$(RM) Makefile
	-$(RM) config.status

#   clean the standard stuff
distclean-std:
	@cd $(TOP)/$(SRC); $(MAKE) $(MFLAGS) SDP=$(SRC)/ distclean

distclean-support:
	@echo "===> $(SRC)/support"; \
	cd $(TOP)/$(SRC)/support; $(MAKE) $(MFLAGS) distclean; \
	if [ ".$(suexec)" = .1 ]; then \
	    echo "$(RM) suexec"; \
	    $(RM) suexec; \
	fi; \
	echo "<=== $(SRC)/support"

distclean-shadow:
	$(RM) -r $(SRC)
	$(RM) $(TOP)/$(MKF)
	-@if [ ".`ls $(TOP)/src.* 2>/dev/null`" = . ]; then \
		echo "$(RM) Makefile"; \
		$(RM) Makefile; \
	fi