path: root/usr.sbin/ospfd/ospfd.conf.5

.\"	$OpenBSD: ospfd.conf.5,v 1.20 2006/12/08 09:19:19 claudio Exp $
.\"
.\" Copyright (c) 2005 Esben Norby <norby@openbsd.org>
.\" Copyright (c) 2004 Claudio Jeker <claudio@openbsd.org>
.\" Copyright (c) 2003, 2004 Henning Brauer <henning@openbsd.org>
.\" Copyright (c) 2002 Daniel Hartmeier <dhartmei@openbsd.org>
.\"
.\" Permission to use, copy, modify, and distribute this software for any
.\" purpose with or without fee is hereby granted, provided that the above
.\" copyright notice and this permission notice appear in all copies.
.\"
.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.\"
.Dd February 2, 2005
.Dt OSPFD.CONF 5
.Os
.Sh NAME
.Nm ospfd.conf
.Nd Open Shortest Path First daemon configuration file
.Sh DESCRIPTION
The
.Xr ospfd 8
daemon implements the Open Shortest Path First protocol version 2 as described
in RFC 2328.
.Sh SECTIONS
The
.Nm
config file is divided into three main sections.
.Bl -tag -width xxxx
.It Sy Macros
User-defined variables may be defined and used later, simplifying the
configuration file.
.It Sy Global Configuration
Global settings for
.Xr ospfd 8 .
A number of global settings can be overruled in specific areas or interfaces.
.It Sy Areas
An OSPF router must be a member of at least one area.
Areas are used to group interfaces, simplifying configuration.
.El
.Sh MACROS
Macros can be defined that will later be expanded in context.
Macro names must start with a letter, and may contain letters, digits,
and underscores.
Macro names may not be reserved words (for example,
.Ic area ,
.Ic interface ,
or
.Ic hello-interval ) .
Macros are not expanded inside quotes.
.Pp
For example:
.Bd -literal -offset indent
hi="5"
area 0.0.0.0 {
	interface em0 {
		hello-interval $hi
	}
}
.Ed
.Pp
The same can be accomplished by specifying the hello-interval
globally or within the area declaration.
.Sh GLOBAL CONFIGURATION
All interface related settings can be configured globally, per area and per
interface.
The only settings that can be set globally and not overruled are listed below.
.Pp
.Bl -tag -width Ds -compact
.It Xo
.Ic fib-update
.Pq Ic yes Ns \&| Ns Ic no
.Xc
If set to
.Ic \&no ,
do not update the Forwarding Information Base, a.k.a. the kernel
routing table.
The default is
.Ic yes .
Setting
.Ic fib-update
to
.Ic \&no
may result in routing loops and could cause major routing issues in the
complete OSPF cloud.
Only routers with just one link to the OSPF cloud may safely set it to
.Ic no .
.Pp
.It Xo
.Op Ic no
.Ic redistribute
.Sm off
.Po Ic static Ns \&| Ns Ic connected Ns \&| Ns
.Ic default Pc
.Sm on
.Xc
.It Xo
.Op Ic no
.Ic redistribute Ar prefix
.Xc
.It Xo
.Op Ic no
.Ic redistribute rtlabel Ar label
.Xc
If set to
.Ic connected ,
routes to directly attached networks will be announced over OSPF.
If set to
.Ic static ,
static routes will be announced over OSPF.
If set to
.Ic default ,
a default route pointing to this router will be announced over OSPF.
It is possible to specify a network range with
.Ar prefix ;
networks need to be part of that range to be redistributed.
Additionally it is possible to redistribute based on route labels
using the
.Ic rtlabel
keyword.
By default no additional routes will be announced over OSPF.
.Pp
.Ic redistribute
statements are evaluated in sequential order, from first to last.
The first matching rule decides if a route should be redistributed or not.
Matching rules starting with
.Ic no
will force the route to be not announced.
The only exception is
.Ic default ,
which will be set no matter what, and additionally
.Ic no
cannot be used together with it.
.Pp
.It Xo
.Ic rfc1583compat
.Pq Ic yes Ns \&| Ns Ic no
.Xc
If set to
.Ic yes ,
decisions regarding AS-external routes are evaluated according to RFC 1583.
The default is
.Ic no .
.Pp
.It Ic router-id Ar address
Set the router ID; if not specified, the lowest IP address of the router
will be used.
.Pp
.It Ic spf-delay Ar seconds
Set SPF delay in seconds.
The delay between receiving an update to the link
state database and starting the shortest path first calculation.
The default value is 1; valid range is 1\-10 seconds.
.Pp
.It Ic spf-holdtime Ar seconds
Set the SPF holdtime in seconds.
The minimum time between two consecutive
shortest path first calculations.
The default value is 5 seconds; the valid is range 1\-5 seconds.
.El
.Sh AREAS
Areas are used for grouping interfaces.
All interface specific parameters can
be configured per area, overruling the global settings.
.Bl -tag -width Ds
.It Ic area Ar address
Specify an area section, grouping one or more interfaces.
.Bd -literal -offset indent
area 0.0.0.0 {
	interface em0
	interface em1 {
		metric 10
	}
}
.Ed
.El
.Sh INTERFACES
Each interface can have several parameters configured individually, otherwise
they are inherited.
An interface is specified by its name.
If multiple networks are configured an additional IP address can be supplied.
By default the first IP address is used.
.Bd -literal -offset indent
interface em0 {
	auth-type crypt
	auth-md 1 "yotVoo_Heypp"
	auth-md-keyid 1
}
interface fxp0:192.168.1.3
.Ed
.Pp
Interface specific parameters are listed below.
.Bl -tag -width Ds
.It Ic auth-key Ar key
Set the authentication key for
.Ic simple
authentication.
Up to 8 characters can be specified.
.It Ic auth-md Ar key-id key
Set the authentication
.Ar key-id
and
.Ar key
for
.Ic crypt
authentication.
The valid range for
.Ar key-id
is 0\-255.
Up to 16 characters can be specified for
.Ar key .
Multiple keys may be specified.
.It Ic auth-md-keyid Ar key-id
Configure the
.Ar key-id
to use for
.Ic crypt
authentication.
The valid range for
.Ar key-id
is 0\-255.
The default key-id is 1.
While key-id 0 is valid, it is unavailable on Cisco devices.
.It Xo
.Ic auth-type
.Po Ic none Ns \&| Ns
.Ic simple Ns \&| Ns Ic crypt Pc
.Xc
Set the authentication type.
The default is
.Ic none .
Simple authentication uses a plaintext password, up to 8 characters.
Crypt authentication uses an MD5 hash.
.It Ic hello-interval Ar seconds
Set the hello interval.
The default value is 10; valid range is 1\-65535 seconds.
.It Ic metric Ar cost
Set the interface metric a.k.a. cost.
The default value is 10; valid range is 1\-65535.
.It Ic passive
Prevent transmission and reception of OSPF packets on this interface.
The specified interface will be announced as a stub network.
.It Ic retransmit-interval Ar seconds
Set retransmit interval.
The default value is 5 seconds; valid range is 5\-3600 seconds.
.It Ic router-dead-time Ar seconds
Set the router dead time, a.k.a. neighbor inactivity timer.
The default value is 40 seconds; valid range is 2\-2147483647 seconds.
When a neighbor has been
inactive for router-dead-time its state is set to DOWN.
Neighbors
that have been inactive for more than 24 hours are completely removed.
.It Ic router-priority Ar priority
Set the router priority.
The default value is 1; valid range is 0\-255.
If set
to 0 the router is not eligible as a Designated Router or Backup Designated
Router.
.It Ic transmit-delay Ar seconds
Set the transmit delay.
The default value is 1; valid range is 1\-3600 seconds.
.El
.Sh FILES
.Bl -tag -width "/etc/ospfd.conf" -compact
.It Pa /etc/ospfd.conf
.Xr ospfd 8
configuration file
.El
.Sh SEE ALSO
.Xr ospfctl 8 ,
.Xr ospfd 8 ,
.Xr rc.conf.local 8
.Sh HISTORY
The
.Nm
file format first appeared in
.Ox 3.7 .