path: root/usr.sbin/smtpd/smtpd.conf.5

.\"	$OpenBSD: smtpd.conf.5,v 1.117 2014/02/16 21:59:34 schwarze Exp $
.\"
.\" Copyright (c) 2008 Janne Johansson <jj@openbsd.org>
.\" Copyright (c) 2009 Jacek Masiulaniec <jacekm@dobremiasto.net>
.\" Copyright (c) 2012 Gilles Chehade <gilles@poolp.org>
.\"
.\" Permission to use, copy, modify, and distribute this software for any
.\" purpose with or without fee is hereby granted, provided that the above
.\" copyright notice and this permission notice appear in all copies.
.\"
.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
.\"
.\"
.Dd $Mdocdate: February 16 2014 $
.Dt SMTPD.CONF 5
.Os
.Sh NAME
.Nm smtpd.conf
.Nd Simple Mail Transfer Protocol daemon configuration file
.Sh DESCRIPTION
.Nm
is the configuration file for the mail daemon
.Xr smtpd 8 .
.Pp
The current line can be extended over multiple lines using a backslash
.Pq Sq \e .
Comments can be put anywhere in the file using a hash mark
.Pq Sq # ,
and extend to the end of the current line.
Care should be taken when commenting out multi-line text:
the comment is effective until the end of the entire block.
.Pp
Argument names not beginning with a letter, digit, or underscore
must be quoted.
Arguments containing whitespace should be surrounded by double quotes
.Pq \&" .
.Pp
Macros can be defined that will later be expanded in context.
Macro names must start with a letter, digit, or underscore,
and may contain any of those characters.
Macro names may not be reserved words (for example
.Ar listen ,
.Ar accept ,
.Ar port ) .
Macros are not expanded inside quotes.
.Pp
For example:
.Bd -literal -offset indent
lan_addr = "192.168.0.1"
listen on $lan_addr
listen on $lan_addr tls auth
.Ed
.Pp
Additional configuration files can be included with the
.Ic include
keyword, for example:
.Bd -literal -offset indent
include "/etc/mail/smtpd.conf.local"
.Ed
.Pp
The syntax of
.Nm
is described below.
.Bl -tag -width Ds
.It Ic accept | reject
.Xr smtpd 8
accepts and rejects messages
based on information gathered during the SMTP session.
.Pp
For each message processed by the daemon,
the filter rules are evaluated in sequential order,
from first to last.
The first matching rule decides what action is taken.
If no rule matches the message,
the default action is to reject the message.
An exclamation mark may be specified to perform a reverse match.
.Pp
Following the accept/reject
decision comes the optional tag matching:
.Bl -tag -width Ds
.It Xo
.Ic tagged
.Op Ic \&!
.Ic tag
.Xc
If specified, the rule will only be matched if the client session was tagged with
.Ar tag .
.El
.Pp
After that the client's IP address filter is specified:
.Bl -tag -width Ds
.It Ic from any
Make the rule match regardless of the IP of connecting client.
.It Xo
.Ic from
.Op Ic \&!
.Ic local
.Xc
The rule matches only locally originating connections.
This is the default,
and may be omitted.
.It Xo
.Ic from
.Op Ic \&!
.Ic source
.Ic table
.Xc
The rule matches if the connection is made from a client whose address
is declared in the table
.Ar table .
.El
.Pp
In addition, finer filtering may be achieved on the sender if desired:
.Bl -tag -width Ds
.It Xo
.Ic sender
.Op Ic \&!
.Ic senders
.Xc
If specified, the rule will only be matched if the sender email address
is found in the table
.Ar senders .
The table may contain complete email addresses or apply to an entire
domain if prefixed with @.
.El
.Pp
Next comes the selection based on the domain the message is sent to:
.Bl -tag -width Ds
.It Ic for any Op Ic alias Aq Ar aliases
Make the rule match regardless of the domain it is sent to.
If specified, the table
.Ar aliases
is used for looking up alternative destinations for all addresses.
.It Ic for any virtual Aq Ar vmap
Make the rule match regardless of the domain it is sent to.
The
.Ar vmap
table will be used as the virtual domain mapping.
.It Xo
.Ic for
.Op Ic \&!
.Ic domain
.Ar domain
.Op Ic alias Aq Ar aliases
.Xc
This rule applies to mail destined for the specified
.Ar domain .
This parameter supports the
.Sq *
wildcard,
so that a single rule for all sub-domains can be used, for example:
.Bd -literal -offset indent
accept for domain "*.example.com" deliver to mbox
.Ed
.Pp
If specified, the table
.Ar aliases
is used for looking up alternative destinations for addresses in this
.Ar domain .
.It Xo
.Ic for
.Op Ic \&!
.Ic domain
.Aq Ar domains
.Op Ic alias Aq Ar aliases
.Xc
This rule applies to mail destined to domains which are part of the table
.Ar domains .
.Pp
If specified, the table
.Ar aliases
is used for looking up alternative destinations for addresses in these
.Ar domains .
.It Xo
.Ic for
.Op Ic \&!
.Ic domain
.Ar domain
.Ic virtual Aq Ar users
.Xc
This rule applies to mail destined for the specified virtual
.Ar domain .
This parameter supports the
.Sq *
wildcard,
so that a single rule for all sub-domains can be used, for example:
.Bd -literal -offset indent
accept for domain "*.example.com" \e
       virtual <users> deliver to mbox
.Ed
.Pp
The table
.Ar users
holds a key-value mapping of virtual to system users.
For an example of how to configure the
.Ar users
table, see
.Xr makemap 8 .
.It Xo
.Ic for
.Op Ic \&!
.Ic domain
.Ao Ar domains
.Ac Ic virtual Aq Ar users
.Xc
This rule applies to mail destined for the virtual domains specified
in the table
.Ar domains .
.Pp
The table
.Ar users
holds a key-value mapping of virtual to system users.
For an example of how to configure the
.Ar users
table, see
.Xr makemap 8 .
.It Xo
.Ic for
.Op Ic \&!
.Ic local
.Op Ic alias Aq Ar aliases
.Xc
This rule applies to mail destined to
.Dq localhost
and to the default server name.
See the
.Sx FILES
entry for
.Pa /etc/mail/mailname
below for details of how the server name is determined.
.It Xo
.Ic for
.Op Ic \&!
.Ic local
.Ic virtual Aq Ar vmap
.Xc
This rule applies to mail destined to
.Dq localhost
and to the default server name.
The
.Ar vmap
table will be used as the virtual domain mapping.
.El
.Pp
Further filtering may be achieved on specific recipients if desired:
.Bl -tag -width Ds
.It Xo
.Ic recipient
.Op Ic \&!
.Ar recipients
.Xc
If specified, the rule will only be matched if the recipient email address
is found in the table
.Ar recipients .
The table may contain complete email addresses or apply to an entire
domain if prefixed with
.Sq @ .
.El
.Pp
If the method of delivery is local, a user database may be
specified to override the system database:
.Bl -tag -width Ds
.It Op Ic userbase Aq Ar table
Look up users in the table
.Ar table
instead of performing system lookups using the
.Xr getpwnam 3
function.
.El
.Pp
Finally, the method of delivery is specified:
.Bl -tag -width Ds
.It Ic deliver to lmtp Op Ar host : Ns Ar port | socket
Mail is delivered to
.Ar host : Ns Ar port ,
or to the
.Ux
.Ar socket
over LMTP.
.It Ic deliver to maildir Ar path
Mail is added to a maildir.
Its location,
.Ar path ,
may contain format specifiers that are expanded before use
.Pq see Sx FORMAT SPECIFIERS .
If
.Ar path
is not provided, then
.Pa ~/Maildir
is assumed.
.It Ic deliver to mbox
Mail is delivered to the local user's system mailbox in
.Pa /var/mail .
.It Ic deliver to mda Ar program
Mail is piped to the specified
.Ar program ,
which is run with the privileges of the user the message is destined to.
This parameter may use conversion specifiers that are expanded before use
.Pq see Sx FORMAT SPECIFIERS .
.It Xo
.Ic relay
.Op Ic backup Op Ar mx
.Op Ic as Ar address
.Op Ic source Ar source
.Bk -words
.Op Ic hostname Ar name
.Op Ic hostnames Ar names
.Ek
.Op Ic pki Ar pkiname
.Op Ic tls | verify
.Xc
Mail is relayed.
The routing decision is based on the DNS system.
.Pp
If the
.Ic backup
parameter is specified, the current server will act as a backup server
for the target domain.
Accepted mails are only relayed through servers with a lower preference
value in the MX record for the domain than the one specified in
.Ar mx .
If
.Ar mx
is not specified, the default server name will be assumed.
.Pp
If the
.Ic as
parameter is specified,
.Xr smtpd 8
will rewrite the sender advertised
in the SMTP session.
.Ar address
may be a user, a domain prefixed with
.Sq @ ,
or an email address, causing
smtpd to rewrite the user-part, the domain-part, or the entire address,
respectively.
.Pp
If the
.Ic source
parameter is specified,
.Xr smtpd 8
will explicitly bind to an address found in the table referenced by
.Ar source
when connecting to the relay.
If the table contains more than one address, they are picked in turn each
time a new connection is opened.
.Pp
By default, when connecting to a remote server,
.Xr smtpd 8
advertises its default server name.
A
.Ic hostname
parameter may be specified to advertise the alternate hostname
.Ar name .
If the
.Ic source
parameter is used, the
.Ic hostnames
parameter may be specified to advertise a hostname based on
the source address.
Table
.Ar names
contains a mapping of IP addresses to hostnames and
.Xr smtpd 8
will automatically select the name that matches its source address
when connected to the remote server.
The
.Ic hostname
and
.Ic hostnames
parameters are mutually exclusive.
.Pp
When relaying, STARTTLS is always attempted if available on remote host
and OpenSMTPD will try to present a certificate matching the outgoing
hostname if one is registered in the pki.
If
.Ic pki
is specified, the certificate registered for
.Ar pkiname
is used instead.
.Pp
If
.Ic tls
is specified, OpenSMTPD will refuse to relay unless the remote host provides
STARTTLS.
.Pp
If
.Ic verify
is specified, OpenSMTPD will refuse to relay unless the remote host provides
STARTTLS and the certificate it presented has been verified.
.Pp
Note that the
.Ic tls
and
.Ic verify
options are mutually exclusive and should only be used in private networks
as they will prevent proper relaying on the Internet.
.It Xo
.Ic relay via
.Ar host
.Op Ic auth Aq Ar auth
.Op Ic as Ar address
.Op Ic source Ar source
.Op Ic hostname Ar name
.Op Ic hostnames Ar names
.Op Ic pki Ar pkiname
.Op Ic verify
.Xc
Mail is relayed through the specified
.Ar host
expressed as a URL.
For example:
.Bd -literal -offset indent
smtp://mx1.example.org		# use SMTP
smtp://mx1.example.org:4321	# use SMTP \e
				# with port 4321
lmtp://localhost:2026		# use LMTP \e
				# with port 2026
.Ed
.Pp
The communication channel may be secured using one of the secure
schemas.
For example:
.Bd -literal -offset indent
tls://mx1.example.org		# use TLS
smtps://mx1.example.org		# use SMTPS
secure://mx1.example.org	# try SMTPS and \e
				# fallback to TLS
.Ed
.Pp
In addition, credentials for authenticated relaying may be provided
when using a secure schema.
For example:
.Bd -literal -offset indent
tls+auth://label@mx.example.org		# over TLS
smtps+auth://label@mx.example.org	# over SMTPS
secure+auth://label@mx.example.org	# over either \e
					# SMTPS or TLS
.Ed
.Pp
If a pki entry exists for the outgoing hostname, or one is provided
with
.Ar pkiname ,
the associated certificate will be sent to the remote server.
.Pp
If an SMTPAUTH session with
.Ar host
is desired, the
.Ic auth
parameter is used to specify the
.Ar auth
table that holds the credentials.
Credentials will be looked up using the label provided in the URL.
.Pp
If the
.Ic as
parameter is specified,
.Xr smtpd 8
will rewrite the sender advertised
in the SMTP session.
.Ar address
may be a user, a domain prefixed with
.Sq @ ,
or an email address, causing
smtpd to rewrite the user-part, the domain-part, or the entire address,
respectively.
.Pp
If the
.Ic source
parameter is specified,
.Xr smtpd 8
will explicitly bind to an address found in the table referenced by
.Ar table
when connecting to the relay.
If the table contains more than one address, they are picked in turn each
time a new connection is opened.
.Pp
By default, when connecting to a remote server,
.Xr smtpd 8
advertises its default server name.
A
.Ic hostname
parameter may be specified to advertise the alternate hostname
.Ar name .
If the
.Ic source
parameter is used, the
.Ic hostnames
parameter may be specified to advertise a hostname based on
the source address.
Table
.Ar names
contains a mapping of IP addresses to hostnames and
.Xr smtpd 8
will automatically select the name that matches its source address
when connected to the remote server.
The
.Ic hostname
and
.Ic hostnames
parameters are mutually exclusive.
.El
.Pp
If
.Ic verify
is specified, OpenSMTPD will refuse to relay unless the remote host provides
STARTTLS and the certificate it presented has been verified.
The relay URL must specify TLS for this option to be valid.
.Pp
Additional per-rule adjustments available:
.Bl -tag -width Ds
.It Xo
.Ic expire
.Sm off
.Ar n
.Brq Cm s | m | h | d
.Sm on
.Xc
Specify how long a message that matched this rule can stay in the queue.
.El
.It Xo
.Ic bounce-warn
.Sm off
.Ar n
.Brq Cm s | m | h | d
.Oo ,
.Sm on
.Ar ...
.Oc
.Xc
Specify the delays for which temporary failure reports must be generated
when messages are stuck in the queue.
For example:
.Bd -literal -offset indent
bounce-warn	1h, 6h, 2d
.Ed
.Pp
will generate a failure report when an envelope is in the queue for more
than one hour, six hours and two days.
The default is 4h.
.It Xo
.Ic expire
.Sm off
.Ar n
.Brq Cm s | m | h | d
.Sm on
.Xc
Specify how long a message can stay in the queue.
The default value is 4 days.
For example:
.Bd -literal -offset indent
expire 4d	# expire after 4 days
expire 10h	# expire after 10 hours
.Ed
.It Xo
.Ic limit mta
.Op Ic for Ic domain Ar domain
.Ar family
.Xc
Instruct
.Xr smtpd 8
to only use the specified address
.Ar family
for outgoing connections.
Accepted values are
.Ic inet4
and
.Ic inet6 .
If a
.Ar domain
is specified, the restriction only applies when connecting
to MXs for this domain.
.It Xo
.Ic limit scheduler max-inflight
.Ar num
.Xc
Suspend the scheduling of envelopes for deliver/relay until the number
of inflight envelopes falls below
.Ar num .
Changing the default value might degrade performances.
.It Xo
.Bk -words
.Ic listen on Ar interface
.Op Ar family
.Op Ic port Ar port
.Op Ic tls | tls-require | tls-require verify | smtps | secure
.Op Ic pki Ar pkiname
.Op Ic auth | auth-optional | auth Ar authtable | Ic auth-optional Ar authtable
.Op Ic tag Ar tag
.Op Ic hostname Ar hostname
.Op Ic hostnames Ar names
.Op Ic mask-source
.Ek
.Xc
Specify an
.Ar interface
and
.Ar port
to listen on.
An interface group, an IP address or a domain name may
be used in place of
.Ar interface .
The
.Ar family
parameter can be used to listen only on specific address family.
Accepted values are
.Ic inet4
and
.Ic inet6 .
.Pp
Secured connections are provided either using STARTTLS
.Pq Ic tls ,
by default on port 25,
or SMTPS
.Pq Ic smtps ,
by default on port 465.
.Ic tls-require
may be used to force clients to establish a secure connection
before being allowed to start an SMTP transaction.
.Pp
If
.Ic tls-require verify
is specified, the client must provide a valid certificate to be
able to establish an SMTP session.
.Pp
.Ic secure
may be specified to provide both STARTTLS and SMTPS services.
Host certificates may be used for these connections,
and must be priorly declared using the pki directive.
If
.Ic pki
is specified,
a certificate matching
.Ic name
is searched for.
.Pp
If the
.Ic auth
parameter is used,
then a client may only start an SMTP transaction after a
successful authentication.
Any remote sender that passed SMTPAUTH is treated as if
it was the server's local user that was sending the mail.
This means that filter rules using "from local" will be matched.
If
.Ic auth-optional
is specified, then SMTPAUTH is not required to establish an
SMTP transaction.
This is only useful to let a listener accept incoming mail from
untrusted senders and outgoing mail from authenticated users in
situations where it is not possible to listen on the submission
port.
.Pp
Both
.Ic auth
and
.Ic auth-optional
accept a table as parameter.
When provided, credentials are looked up in this table.
Credentials format is described in
.Xr table 5 .
.Pp
If the
.Ic tag
parameter is used, then clients connecting to the listener will be
tagged
.Ar tag .
.Pp
If the
.Ic hostname
parameter is used, then it will be used in the greeting banner
instead of the default server name.
.Pp
The
.Ic hostnames
parameter overrides the server name for specific addresses.
Table
.Ar names
contains a mapping of IP addresses to hostnames and
.Xr smtpd 8
will use the hostname that matches the address on which the connection arrives
if it is found in the mapping.
.Pp
If the
.Ic mask-source
parameter is used, then the listener will skip the "from" part
when prepending the "Received" header.
.It Ic max-message-size Ar n
Specify a maximum message size of
.Ar n
bytes.
The argument may contain a multiplier, as documented in
.Xr scan_scaled 3 .
The default maximum message size is 35MB if none is specified.
.It Ic pki Ar hostname Ic certificate Ar certfile
Associate the certificate located in
.Ar certfile
with
.Ar hostname .
.Pp
A certificate chain may be created by appending one or many certificates,
including a Certificate Authority certificate,
to
.Ar certfile .
.Pp
Creation of certificates is documented in
.Xr starttls 8 .
.It Ic pki Ar hostname Ic key Ar keyfile
Associate the key located in
.Ar keyfile
with
.Ar hostname .
.It Ic pki Ar hostname Ic ca Ar cafile
Associate a custom CA certificate
.Ar cafile
with
.Ar hostname .
.It Ic pki Ar hostname Ic dhparams Ar dhfile
Associate the Diffie-Hellman parameters located in
.Ar dhfile
with
.Ar hostname .
.Pp
The parameters are used for ephemeral key exchange.
If not specified, OpenSMTPD will use safely generated builtin parameters.
.Pp
Creation of Diffie-Hellman parameters is documented in
.Xr openssl 1 .
.It Ic queue compression
Enable transparent compression of envelopes and messages.
The only supported algorithm at the moment is gzip.
Envelopes and messages may be inspected using the
.Xr smtpctl 8
or
.Xr gzcat 1
utilities.
.It Ic queue encryption Op key Ar key
Enable transparent encryption of envelopes and messages.
.Ar key
must be a 16-byte random key in hexadecimal representation.
It can be obtained using the
.Xr openssl 1
utility as follow:
.Bd -literal -offset indent
$ openssl rand \-hex 16
.Ed
.Pp
If the
.Ar key
parameter is not specified, it is read with
.Xr getpass 3
at startup.
If
.Ar key
is "stdin", then it is read from the standard input at startup.
.Pp
The only supported algorithm is AES-256 in GCM mode.
Envelopes and messages may be inspected using the
.Xr smtpctl 8
utility.
.Pp
Queue encryption can be used with queue compression and will always
perform compression before encryption.
.It Ic table Ar name Oo Ar type : Oc Ns Ar config
Tables are used to provide additional configuration information for
.Xr smtpd 8
in the form of lists or key-value mappings.
The format of the entries depends on what the table is used for.
Refer to
.Xr table 5
for the exhaustive documentation.
.Pp
The table is identified using table name
.Ar name ;
the name itself is arbitrarily chosen.
.Pp
.Ar type
specifies the table backend,
and should be one of the following:
.Pp
.Bl -tag -width "fileXXX" -compact
.It db
Information is stored in a file created using
.Xr makemap 8 .
.It file
Information is stored in a plain text file using the
same format as used to generate
.Xr makemap 8
mappings.
This is the default.
.El
.Pp
.Ar config
specifies a configuration file for the table data.
It must be an absolute path to a file for the
.Dq file
and
.Dq db
table types.
.It Ic table Ar name Brq Ar value Op , Ar ...
Tables containing list of static values may be declared
using an inlined notation.
.Pp
The table is identified using table name
.Ar name ;
the name itself is arbitrarily chosen.
.Pp
The table must contain at least one value and may declare many values as a
list of comma separated strings.
.It Ic table Ar name Brq Ar key Ns = Ns Ar value Op , Ar ...
Tables containing static key-value mappings may be declared
using an inlined notation.
.Pp
The table is identified using table name
.Ar name ;
the name itself is arbitrarily chosen.
.Pp
The table must contain at least one key-value mapping and may declare
many mappings as a list of comma separated
.Ar key Ns = Ns Ar value
descriptions.
.El
.Ss FORMAT SPECIFIERS
Some configuration directives support expansion of their parameters at runtime.
Such directives (for example
.Ar deliver to maildir ,
.Ar deliver to mda )
may use format specifiers which will be expanded before delivery or
relaying.
The following formats are currently supported:
.Bd -literal -offset indent
%{sender}	     sender email address
%{sender.user}	     user part of the sender email address
%{sender.domain}     domain part of the sender email address
%{rcpt}              recipient email address
%{rcpt.user}	     user part of the recipient email address
%{rcpt.domain}	     domain part of the recipient email address
%{dest}              recipient email address after expansion
%{dest.user}	     user part after expansion
%{dest.domain}	     domain part after expansion
%{user.username}     local user
%{user.directory}    home directory of the local user
.Ed
.Pp
Expansion formats also support partial expansion using the optional
bracket notations with substring offset.
For example, with recipient domain "example.org":
.Bd -literal -offset indent
%{rcpt.domain[0]}	expands to "e"
%{rcpt.domain[1]}	expands to "x"
%{rcpt.domain[8:]}	expands to "org"
%{rcpt.domain[-3:]}	expands to "org"
%{rcpt.domain[0:6]}	expands to "example"
%{rcpt.domain[0:-4]}	expands to "example"
.Ed
.Pp
In addition, modifiers may be applied to the token.
For example, with recipient "User+Tag@Example.org":
.Bd -literal -offset indent
%{rcpt:lowercase}	expands to "user+tag@example.org"
%{rcpt:uppercase}	expands to "USER+TAG@EXAMPLE.ORG"
%{rcpt:strip}		expands to "User@Example.org"
%{rcpt:lowercase|strip}	expands to "user@example.org"
.Ed
.Pp
For security concerns, expanded values are sanitized and potentially
dangerous characters are replaced with ":".
In situations where they are desirable, the "raw" modifier may be applied.
For example, with recipient "user+t?g@example.org":
.Bd -literal -offset indent
%{rcpt}		expands to "user+t:g@example.org"
%{rcpt:raw}	expands to "user+t?g@example.org"
.Ed
.Sh FILES
.Bl -tag -width "/etc/mail/smtpd.confXXX"
.It Pa /etc/mail/smtpd.conf
Default
.Xr smtpd 8
configuration file.
.It Pa /etc/mail/mailname
If this file exists,
the first line is used as the server name.
Otherwise, the server name is derived from the local hostname returned by
.Xr gethostname 3 ,
either directly if it is a fully qualified domain name,
or by retreiving the associated canonical name through
.Xr getaddrinfo 3 .
.It Pa /var/spool/smtpd/
Spool directories for mail during processing.
.El
.Sh EXAMPLES
The default
.Nm
file which ships with
.Ox
listens on the loopback network interface (lo0),
and allows for mail from users and daemons on the local machine,
as well as permitting email to remote servers.
Some more complex configurations are given below.
.Pp
This first example is the same as the default configuration,
but all outgoing mail is forwarded to a remote SMTP server.
A secrets file is needed to specify a username and password:
.Bd -literal -offset indent
# touch /etc/mail/secrets
# chmod 640 /etc/mail/secrets
# chown root:_smtpd /etc/mail/secrets
# echo "label username:password" > /etc/mail/secrets
# makemap /etc/mail/secrets
.Ed
.Pp
.Nm
would look like this:
.Bd -literal -offset indent
listen on lo0
table aliases db:/etc/mail/aliases.db
table secrets db:/etc/mail/secrets.db
accept for local alias <aliases> deliver to mbox
accept for any relay via tls+auth://label@smtp.example.com \e
	auth <secrets>
.Ed
.Pp
In this second example,
the aim is to permit mail relaying for any user that can authenticate
using their normal login credentials.
An RSA certificate must be provided to prove the server's identity.
The mail server listens on all interfaces the default route(s) point to.
Mail with a local destination should be sent to an external mda.
First, the RSA certificate is created:
.Bd -literal -offset indent
# openssl genrsa \-out /etc/ssl/private/mail.example.com.key 4096
# openssl req \-new \-x509 \-key /etc/ssl/private/mail.example.com.key \e
	\-out /etc/ssl/mail.example.com.crt \-days 365
# chmod 600 /etc/ssl/mail.example.com.crt
# chmod 600 /etc/ssl/private/mail.example.com.key
.Ed
.Pp
In the example above,
a certificate valid for one year was created.
The configuration file would look like this:
.Bd -literal -offset indent
pki mail.example.com certificate "/etc/ssl/mail.example.com.crt"
pki mail.example.com key "/etc/ssl/private/mail.example.com.key"

listen on lo0
listen on egress tls pki mail.example.com auth

table aliases db:/etc/mail/aliases.db

accept for local alias <aliases> deliver to mda "/path/to/mda \-f \-"
accept from any for domain example.org \e
	deliver to mda "/path/to/mda \-f \-"
accept for any relay
.Ed
.Sh SEE ALSO
.Xr mailer.conf 5 ,
.Xr table 5 ,
.Xr makemap 8 ,
.Xr smtpd 8
.Sh HISTORY
.Xr smtpd 8
first appeared in
.Ox 4.6 .