regenerate with OpenBSD autotools

1 files changed, 253 insertions, 224 deletions

diff --git a/app/appres/install-sh b/app/appres/install-sh
index 6ce63b9f7..4d4a9519e 100644
--- a/app/appres/install-sh
+++ b/app/appres/install-sh
@@ -1,7 +1,8 @@
 #!/bin/sh
-#
 # install - install a program, script, or datafile
-#
+
+scriptversion=2005-05-14.22
+
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
 # following copyright and license.
@@ -41,13 +42,11 @@
 # from scratch.  It can only install one file at a time, a restriction
 # shared with many OS's install programs.
 
-
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
 doit="${DOITPROG-}"
 
-
 # put in absolute paths if you don't have them in your path; or use env. vars.
 
 mvprog="${MVPROG-mv}"
@@ -59,236 +58,266 @@ stripprog="${STRIPPROG-strip}"
 rmprog="${RMPROG-rm}"
 mkdirprog="${MKDIRPROG-mkdir}"
 
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
 chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
+chowncmd=
+chgrpcmd=
+stripcmd=
 rmcmd="$rmprog -f"
 mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd=$cpprog
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd=$stripprog
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "$0: no input file specified" >&2
-	exit 1
-else
-	:
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-
-	if [ -d "$dst" ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=$mkdirprog
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f "$src" ] || [ -d "$src" ]
-	then
-		:
-	else
-		echo "$0: $src does not exist" >&2
-		exit 1
-	fi
-
-	if [ x"$dst" = x ]
-	then
-		echo "$0: no destination specified" >&2
-		exit 1
-	else
-		:
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d "$dst" ]
-	then
-		dst=$dst/`basename "$src"`
-	else
-		:
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-	'
-IFS="${IFS-$defaultIFS}"
-
-oIFS=$IFS
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS=$oIFS
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp=$pathcomp$1
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c         (ignored)
+-d         create directories instead of installing files.
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+  case $1 in
+    -c) shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) chmodcmd="$chmodprog $2"
+        shift
+        shift
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t) dstarg=$2
 	shift
+	shift
+	continue;;
 
-	if [ ! -d "$pathcomp" ] ;
-        then
-		$mkdirprog "$pathcomp"
-	else
-		:
-	fi
-
-	pathcomp=$pathcomp/
+    -T) no_target_directory=true
+	shift
+	continue;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    *)  # When -d is used, all remaining arguments are directories to create.
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
+        # Otherwise, the last argument is the destination.  Remove it from $@.
+	for arg
+	do
+          if test -n "$dstarg"; then
+	    # $@ is not empty: it contains at least $arg.
+	    set fnord "$@" "$dstarg"
+	    shift # fnord
+	  fi
+	  shift # arg
+	  dstarg=$arg
+	done
+	break;;
+  esac
 done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd "$dst" &&
 
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		dstfile=`basename "$dst" $transformbasename |
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		:
-	fi
-
-# Make a couple of temp file names in the proper directory.
-
-	dsttmp=$dstdir/_inst.$$_
-	rmtmp=$dstdir/_rm.$$_
-
-# Trap to clean up temp files at exit.
-
-	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
-	trap '(exit $?); exit' 1 2 13 15
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd "$src" "$dsttmp" &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
-
-# Now remove or move aside any old file at destination location.  We try this
-# two ways since rm can't unlink itself on some systems and the destination
-# file might be busy for other reasons.  In this case, the final cleanup
-# might fail but the new file should still install successfully.
-
-{
-	if [ -f "$dstdir/$dstfile" ]
-	then
-		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
-		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
-		{
-		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		  (exit 1); exit
-		}
-	else
-		:
-	fi
-} &&
-
-# Now rename the file to the real destination.
+if test -z "$1"; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
 
-	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src ;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    src=
+
+    if test -d "$dst"; then
+      mkdircmd=:
+      chmodcmd=
+    else
+      mkdircmd=$mkdirprog
+    fi
+  else
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dstarg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dstarg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst ;;
+    esac
 
-fi &&
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+      fi
+      dst=$dst/`basename "$src"`
+    fi
+  fi
+
+  # This sed command emulates the dirname command.
+  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+  # Make sure that the destination directory exists.
+
+  # Skip lots of stat calls in the usual case.
+  if test ! -d "$dstdir"; then
+    defaultIFS='
+	 '
+    IFS="${IFS-$defaultIFS}"
+
+    oIFS=$IFS
+    # Some sh's can't handle IFS=/ for some reason.
+    IFS='%'
+    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+    shift
+    IFS=$oIFS
+
+    pathcomp=
+
+    while test $# -ne 0 ; do
+      pathcomp=$pathcomp$1
+      shift
+      if test ! -d "$pathcomp"; then
+        $mkdirprog "$pathcomp"
+	# mkdir can fail with a `File exist' error in case several
+	# install-sh are creating the directory concurrently.  This
+	# is OK.
+	test -d "$pathcomp" || exit
+      fi
+      pathcomp=$pathcomp/
+    done
+  fi
+
+  if test -n "$dir_arg"; then
+    $doit $mkdircmd "$dst" \
+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+  else
+    dstfile=`basename "$dst"`
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+    trap '(exit $?); exit' 1 2 13 15
+
+    # Copy the file name to the temp name.
+    $doit $cpprog "$src" "$dsttmp" &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	       || {
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		 (exit 1); exit 1
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+    }
+  fi || { (exit 1); exit 1; }
+done
 
 # The final little trick to "correctly" pass the exit status to the exit trap.
-
 {
-	(exit 0); exit
+  (exit 0); exit 0
 }
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End: