Upate to xcalc 1.0.5

1 files changed, 490 insertions, 214 deletions

diff --git a/app/xcalc/Makefile.in b/app/xcalc/Makefile.in
index 15b4596e1..772e78464 100644
--- a/app/xcalc/Makefile.in
+++ b/app/xcalc/Makefile.in
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.12.6 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,9 +14,9 @@
 
 @SET_MAKE@
 
-# 
+#
 #  Copyright 2005  Red Hat, Inc.
-# 
+#
 #  Permission to use, copy, modify, distribute, and sell this software and its
 #  documentation for any purpose is hereby granted without fee, provided that
 #  the above copyright notice appear in all copies and that both that
@@ -26,7 +26,7 @@
 #  specific, written prior permission.  Red Hat makes no
 #  representations about the suitability of this software for any purpose.  It
 #  is provided "as is" without express or implied warranty.
-# 
+#
 #  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
 #  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
 #  EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
@@ -36,15 +36,29 @@
 #  PERFORMANCE OF THIS SOFTWARE.
 
 
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
 VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
 install_sh_SCRIPT = $(install_sh) -c
@@ -59,65 +73,152 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 bin_PROGRAMS = xcalc$(EXEEXT)
+subdir = .
 DIST_COMMON = README $(am__configure_deps) $(dist_appdefault_DATA) \
 	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
 	$(srcdir)/config.h.in $(top_srcdir)/configure AUTHORS COPYING \
 	ChangeLog INSTALL NEWS config.guess config.sub depcomp \
 	install-sh missing
-subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(SHELL) $(install_sh) -d
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)" \
-	"$(DESTDIR)$(appdefaultdir)"
-binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)"
 PROGRAMS = $(bin_PROGRAMS)
 am_xcalc_OBJECTS = actions.$(OBJEXT) math.$(OBJEXT) xcalc.$(OBJEXT)
 xcalc_OBJECTS = $(am_xcalc_OBJECTS)
 am__DEPENDENCIES_1 =
 xcalc_DEPENDENCIES = $(am__DEPENDENCIES_1)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = -I.@am__isrc@
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
 CCLD = $(CC)
 LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
 SOURCES = $(xcalc_SOURCES)
 DIST_SOURCES = $(xcalc_SOURCES)
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-appmanDATA_INSTALL = $(INSTALL_DATA)
-dist_appdefaultDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(appman_DATA) $(dist_appdefault_DATA)
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+DATA = $(dist_appdefault_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	cscope distdir dist dist-all distcheck
 ETAGS = etags
 CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 GZIP_ENV = --best
+DIST_TARGETS = dist-bzip2 dist-gzip
 distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
 AMTAR = @AMTAR@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 APPDEFS_CFLAGS = @APPDEFS_CFLAGS@
@@ -128,6 +229,7 @@ AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
+BASE_CFLAGS = @BASE_CFLAGS@
 CC = @CC@
 CCDEPMODE = @CCDEPMODE@
 CFLAGS = @CFLAGS@
@@ -148,6 +250,7 @@ EXEEXT = @EXEEXT@
 FILE_MAN_DIR = @FILE_MAN_DIR@
 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
 GREP = @GREP@
+INSTALL = @INSTALL@
 INSTALL_CMD = @INSTALL_CMD@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -160,32 +263,35 @@ LIB_MAN_DIR = @LIB_MAN_DIR@
 LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
 LTLIBOBJS = @LTLIBOBJS@
 MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 MAKEINFO = @MAKEINFO@
 MAN_SUBSTS = @MAN_SUBSTS@
 MISC_MAN_DIR = @MISC_MAN_DIR@
 MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
+MKDIR_P = @MKDIR_P@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 PKG_CONFIG = @PKG_CONFIG@
 SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
+STRICT_CFLAGS = @STRICT_CFLAGS@
 STRIP = @STRIP@
 VERSION = @VERSION@
 XCALC_CFLAGS = @XCALC_CFLAGS@
 XCALC_LIBS = @XCALC_LIBS@
 XORG_MAN_PAGE = @XORG_MAN_PAGE@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -198,6 +304,7 @@ build_alias = @build_alias@
 build_cpu = @build_cpu@
 build_os = @build_os@
 build_vendor = @build_vendor@
+builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
@@ -225,8 +332,13 @@ program_transform_name = @program_transform_name@
 psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = man
 AM_CFLAGS = $(XCALC_CFLAGS) $(CWARNFLAGS)
 xcalc_LDADD = $(XCALC_LIBS) -lm
 xcalc_SOURCES = \
@@ -235,9 +347,6 @@ xcalc_SOURCES = \
         xcalc.c \
         xcalc.h
 
-appman_PRE = \
-        xcalc.man
-
 
 # App default files  (*.ad)
 DISTCHECK_CONFIGURE_FLAGS = --with-appdefaultdir=\$${datadir}/X11/app-defaults
@@ -245,32 +354,27 @@ dist_appdefault_DATA = \
         app-defaults/XCalc \
         app-defaults/XCalc-color
 
-appmandir = $(APP_MAN_DIR)
-appman_DATA = $(appman_PRE:man=@APP_MAN_SUFFIX@)
-EXTRA_DIST = $(appman_PRE) autogen.sh
 MAINTAINERCLEANFILES = ChangeLog INSTALL
-CLEANFILES = $(appman_DATA)
-SUFFIXES = .$(APP_MAN_SUFFIX) .man
 all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-am
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
 
 .SUFFIXES:
-.SUFFIXES: .$(APP_MAN_SUFFIX) .man .c .o .obj
-am--refresh:
+.SUFFIXES: .c .o .obj
+am--refresh: Makefile
 	@:
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 		&& exit 0; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -286,21 +390,20 @@ $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENC
 	$(SHELL) ./config.status --recheck
 
 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
 
 config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
-	else :; fi
+	@if test ! -f $@; then rm -f stamp-h1; else :; fi
+	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 	@rm -f stamp-h1
 	cd $(top_builddir) && $(SHELL) ./config.status config.h
 $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 	rm -f stamp-h1
 	touch $@
 
@@ -308,30 +411,47 @@ distclean-hdr:
 	-rm -f config.h stamp-h1
 install-binPROGRAMS: $(bin_PROGRAMS)
 	@$(NORMAL_INSTALL)
-	test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  if test -f $$p \
-	  ; then \
-	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
-	   echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	   $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
-	  else :; fi; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
 
 uninstall-binPROGRAMS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 clean-binPROGRAMS:
 	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-xcalc$(EXEEXT): $(xcalc_OBJECTS) $(xcalc_DEPENDENCIES) 
+xcalc$(EXEEXT): $(xcalc_OBJECTS) $(xcalc_DEPENDENCIES) $(EXTRA_xcalc_DEPENDENCIES) 
 	@rm -f xcalc$(EXEEXT)
-	$(LINK) $(xcalc_LDFLAGS) $(xcalc_OBJECTS) $(xcalc_LDADD) $(LIBS)
+	$(AM_V_CCLD)$(LINK) $(xcalc_OBJECTS) $(xcalc_LDADD) $(LIBS)
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
@@ -344,52 +464,85 @@ distclean-compile:
 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xcalc.Po@am__quote@
 
 .c.o:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c $<
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c $<
 
 .c.obj:
-@am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-uninstall-info-am:
-install-appmanDATA: $(appman_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(appmandir)" || $(mkdir_p) "$(DESTDIR)$(appmandir)"
-	@list='$(appman_DATA)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(appmanDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appmandir)/$$f'"; \
-	  $(appmanDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appmandir)/$$f"; \
-	done
-
-uninstall-appmanDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(appman_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(appmandir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(appmandir)/$$f"; \
-	done
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
 install-dist_appdefaultDATA: $(dist_appdefault_DATA)
 	@$(NORMAL_INSTALL)
-	test -z "$(appdefaultdir)" || $(mkdir_p) "$(DESTDIR)$(appdefaultdir)"
-	@list='$(dist_appdefault_DATA)'; for p in $$list; do \
+	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(appdefaultdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(appdefaultdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(dist_appdefaultDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(appdefaultdir)/$$f'"; \
-	  $(dist_appdefaultDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(appdefaultdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(appdefaultdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(appdefaultdir)" || exit $$?; \
 	done
 
 uninstall-dist_appdefaultDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(dist_appdefault_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(appdefaultdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(appdefaultdir)/$$f"; \
+	@list='$(dist_appdefault_DATA)'; test -n "$(appdefaultdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(appdefaultdir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+cscopelist-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -397,111 +550,188 @@ ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
-TAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+
+clean-cscope:
+	-rm -f cscope.files
+
+cscope.files: clean-cscope cscopelist-recursive cscopelist
+
+cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS) $(LISP)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/app-defaults
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
 	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
 	$(MAKE) $(AM_MAKEFLAGS) \
 	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
 	  dist-hook
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
 
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-shar: distdir
 	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
 dist-zip: distdir
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
+	$(am__post_remove_distdir)
 
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
 # it guarantees that the distribution is self-contained by making another
@@ -509,24 +739,31 @@ dist dist-all: distdir
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_inst
 	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
@@ -547,14 +784,24 @@ distcheck: dist
 	  && rm -rf "$$dc_destdir" \
 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
 	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__post_remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
 	          echo "  (check DESTDIR support)"; \
@@ -571,106 +818,138 @@ distcleancheck: distclean
 	       $(distcleancheck_listfiles) ; \
 	       exit 1; } >&2
 check-am: all-am
-check: check-am
+check: check-recursive
 all-am: Makefile $(PROGRAMS) $(DATA) config.h
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appmandir)" "$(DESTDIR)$(appdefaultdir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(appdefaultdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 
-installcheck: installcheck-am
+installcheck: installcheck-recursive
 install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
 mostlyclean-generic:
 
 clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
 	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
+clean: clean-recursive
 
 clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
 
-distclean: distclean-am
+distclean: distclean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -rf ./$(DEPDIR)
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
 	distclean-hdr distclean-tags
 
-dvi: dvi-am
+dvi: dvi-recursive
 
 dvi-am:
 
-html: html-am
+html: html-recursive
+
+html-am:
 
-info: info-am
+info: info-recursive
 
 info-am:
 
-install-data-am: install-appmanDATA install-dist_appdefaultDATA
+install-data-am: install-dist_appdefaultDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
 
 install-exec-am: install-binPROGRAMS
 
-install-info: install-info-am
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
 
 install-man:
 
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
 installcheck-am:
 
-maintainer-clean: maintainer-clean-am
+maintainer-clean: maintainer-clean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -rf $(top_srcdir)/autom4te.cache
 	-rm -rf ./$(DEPDIR)
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
-mostlyclean: mostlyclean-am
+mostlyclean: mostlyclean-recursive
 
 mostlyclean-am: mostlyclean-compile mostlyclean-generic
 
-pdf: pdf-am
+pdf: pdf-recursive
 
 pdf-am:
 
-ps: ps-am
+ps: ps-recursive
 
 ps-am:
 
-uninstall-am: uninstall-appmanDATA uninstall-binPROGRAMS \
-	uninstall-dist_appdefaultDATA uninstall-info-am
-
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
-	clean-binPROGRAMS clean-generic ctags dist dist-all dist-bzip2 \
-	dist-gzip dist-hook dist-shar dist-tarZ dist-zip distcheck \
-	distclean distclean-compile distclean-generic distclean-hdr \
-	distclean-tags distcleancheck distdir distuninstallcheck dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-appmanDATA install-binPROGRAMS install-data \
-	install-data-am install-dist_appdefaultDATA install-exec \
-	install-exec-am install-info install-info-am install-man \
+uninstall-am: uninstall-binPROGRAMS uninstall-dist_appdefaultDATA
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
+	cscopelist-recursive ctags-recursive install-am install-strip \
+	tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am am--refresh check check-am clean clean-binPROGRAMS \
+	clean-cscope clean-generic cscope cscopelist \
+	cscopelist-recursive ctags ctags-recursive dist dist-all \
+	dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar dist-tarZ \
+	dist-xz dist-zip distcheck distclean distclean-compile \
+	distclean-generic distclean-hdr distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
+	info-am install install-am install-binPROGRAMS install-data \
+	install-data-am install-dist_appdefaultDATA install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
 	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-appmanDATA \
-	uninstall-binPROGRAMS uninstall-dist_appdefaultDATA \
-	uninstall-info-am
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
+	ps ps-am tags tags-recursive uninstall uninstall-am \
+	uninstall-binPROGRAMS uninstall-dist_appdefaultDATA
 
 
 .PHONY: ChangeLog INSTALL
@@ -683,9 +962,6 @@ ChangeLog:
 
 dist-hook: ChangeLog INSTALL
 
-# String replacements in MAN_SUBSTS now come from xorg-macros.m4 via configure
-.man.$(APP_MAN_SUFFIX):
-	$(AM_V_GEN)$(SED) $(MAN_SUBSTS) < $< > $@
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT: