regenerate with OpenBSD autotools

3 files changed, 404 insertions, 304 deletions

diff --git a/font/xfree86-type1/install-sh b/font/xfree86-type1/install-sh
index 6ce63b9f7..4d4a9519e 100644
--- a/font/xfree86-type1/install-sh
+++ b/font/xfree86-type1/install-sh
@@ -1,7 +1,8 @@
 #!/bin/sh
-#
 # install - install a program, script, or datafile
-#
+
+scriptversion=2005-05-14.22
+
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
 # following copyright and license.
@@ -41,13 +42,11 @@
 # from scratch.  It can only install one file at a time, a restriction
 # shared with many OS's install programs.
 
-
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
 doit="${DOITPROG-}"
 
-
 # put in absolute paths if you don't have them in your path; or use env. vars.
 
 mvprog="${MVPROG-mv}"
@@ -59,236 +58,266 @@ stripprog="${STRIPPROG-strip}"
 rmprog="${RMPROG-rm}"
 mkdirprog="${MKDIRPROG-mkdir}"
 
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
 chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
+chowncmd=
+chgrpcmd=
+stripcmd=
 rmcmd="$rmprog -f"
 mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd=$cpprog
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd=$stripprog
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "$0: no input file specified" >&2
-	exit 1
-else
-	:
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-
-	if [ -d "$dst" ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=$mkdirprog
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f "$src" ] || [ -d "$src" ]
-	then
-		:
-	else
-		echo "$0: $src does not exist" >&2
-		exit 1
-	fi
-
-	if [ x"$dst" = x ]
-	then
-		echo "$0: no destination specified" >&2
-		exit 1
-	else
-		:
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d "$dst" ]
-	then
-		dst=$dst/`basename "$src"`
-	else
-		:
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-	'
-IFS="${IFS-$defaultIFS}"
-
-oIFS=$IFS
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS=$oIFS
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp=$pathcomp$1
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c         (ignored)
+-d         create directories instead of installing files.
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+  case $1 in
+    -c) shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) chmodcmd="$chmodprog $2"
+        shift
+        shift
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t) dstarg=$2
 	shift
+	shift
+	continue;;
 
-	if [ ! -d "$pathcomp" ] ;
-        then
-		$mkdirprog "$pathcomp"
-	else
-		:
-	fi
-
-	pathcomp=$pathcomp/
+    -T) no_target_directory=true
+	shift
+	continue;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    *)  # When -d is used, all remaining arguments are directories to create.
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
+        # Otherwise, the last argument is the destination.  Remove it from $@.
+	for arg
+	do
+          if test -n "$dstarg"; then
+	    # $@ is not empty: it contains at least $arg.
+	    set fnord "$@" "$dstarg"
+	    shift # fnord
+	  fi
+	  shift # arg
+	  dstarg=$arg
+	done
+	break;;
+  esac
 done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd "$dst" &&
 
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		dstfile=`basename "$dst" $transformbasename |
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		:
-	fi
-
-# Make a couple of temp file names in the proper directory.
-
-	dsttmp=$dstdir/_inst.$$_
-	rmtmp=$dstdir/_rm.$$_
-
-# Trap to clean up temp files at exit.
-
-	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
-	trap '(exit $?); exit' 1 2 13 15
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd "$src" "$dsttmp" &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
-
-# Now remove or move aside any old file at destination location.  We try this
-# two ways since rm can't unlink itself on some systems and the destination
-# file might be busy for other reasons.  In this case, the final cleanup
-# might fail but the new file should still install successfully.
-
-{
-	if [ -f "$dstdir/$dstfile" ]
-	then
-		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
-		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
-		{
-		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		  (exit 1); exit
-		}
-	else
-		:
-	fi
-} &&
-
-# Now rename the file to the real destination.
+if test -z "$1"; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
 
-	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src ;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    src=
+
+    if test -d "$dst"; then
+      mkdircmd=:
+      chmodcmd=
+    else
+      mkdircmd=$mkdirprog
+    fi
+  else
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dstarg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dstarg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst ;;
+    esac
 
-fi &&
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+      fi
+      dst=$dst/`basename "$src"`
+    fi
+  fi
+
+  # This sed command emulates the dirname command.
+  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+  # Make sure that the destination directory exists.
+
+  # Skip lots of stat calls in the usual case.
+  if test ! -d "$dstdir"; then
+    defaultIFS='
+	 '
+    IFS="${IFS-$defaultIFS}"
+
+    oIFS=$IFS
+    # Some sh's can't handle IFS=/ for some reason.
+    IFS='%'
+    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+    shift
+    IFS=$oIFS
+
+    pathcomp=
+
+    while test $# -ne 0 ; do
+      pathcomp=$pathcomp$1
+      shift
+      if test ! -d "$pathcomp"; then
+        $mkdirprog "$pathcomp"
+	# mkdir can fail with a `File exist' error in case several
+	# install-sh are creating the directory concurrently.  This
+	# is OK.
+	test -d "$pathcomp" || exit
+      fi
+      pathcomp=$pathcomp/
+    done
+  fi
+
+  if test -n "$dir_arg"; then
+    $doit $mkdircmd "$dst" \
+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+  else
+    dstfile=`basename "$dst"`
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+    trap '(exit $?); exit' 1 2 13 15
+
+    # Copy the file name to the temp name.
+    $doit $cpprog "$src" "$dsttmp" &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	       || {
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		 (exit 1); exit 1
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+    }
+  fi || { (exit 1); exit 1; }
+done
 
 # The final little trick to "correctly" pass the exit status to the exit trap.
-
 {
-	(exit 0); exit
+  (exit 0); exit 0
 }
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/font/xfree86-type1/missing b/font/xfree86-type1/missing
index fc54c64ec..894e786e1 100644
--- a/font/xfree86-type1/missing
+++ b/font/xfree86-type1/missing
@@ -1,6 +1,10 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 Free Software Foundation, Inc.
+
+scriptversion=2005-06-08.21
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+#   Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -15,8 +19,8 @@
 
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -38,18 +42,24 @@ else
   configure_ac=configure.in
 fi
 
+msg="missing on your system"
+
 case "$1" in
 --run)
   # Try to run requested program, and just exit if it succeeds.
   run=
   shift
   "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
   ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
 
   -h|--h|--he|--hel|--help)
     echo "\
@@ -74,11 +84,15 @@ Supported PROGRAM values:
   lex          create \`lex.yy.c', if possible, from existing .c
   makeinfo     touch the output file
   tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
     ;;
 
   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing 0.4 - GNU automake"
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
     ;;
 
   -*)
@@ -87,14 +101,44 @@ Supported PROGRAM values:
     exit 1
     ;;
 
-  aclocal*)
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
     if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
        # We have it, but it failed.
        exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
     fi
+    ;;
+esac
 
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+  aclocal*)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
          to install the \`Automake' and \`Perl' packages.  Grab them from
          any GNU archive site."
@@ -102,13 +146,8 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   autoconf)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`${configure_ac}'.  You might want to install the
          \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
          archive site."
@@ -116,13 +155,8 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   autoheader)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
          to install the \`Autoconf' and \`GNU m4' packages.  Grab them
          from any GNU archive site."
@@ -140,13 +174,8 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   automake*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
          You might want to install the \`Automake' and \`Perl' packages.
          Grab them from any GNU archive site."
@@ -156,14 +185,9 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   autom4te)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
          proper tools for further handling them.
          You can get \`$1' as part of \`Autoconf' from any GNU
          archive site."
@@ -185,7 +209,7 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
 
   bison|yacc)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' $msg.  You should only need it if
          you modified a \`.y' file.  You may need the \`Bison' package
          in order for those modifications to take effect.  You can get
          \`Bison' from any GNU archive site."
@@ -215,7 +239,7 @@ WARNING: \`$1' is missing on your system.  You should only need it if
 
   lex|flex)
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.l' file.  You may need the \`Flex' package
          in order for those modifications to take effect.  You can get
          \`Flex' from any GNU archive site."
@@ -237,13 +261,8 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   help2man)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
 	 \`Help2man' package in order for those modifications to take
 	 effect.  You can get \`Help2man' from any GNU archive site."
@@ -262,32 +281,30 @@ WARNING: \`$1' is missing on your system.  You should only need it if
     ;;
 
   makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
     echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
+WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
          indirectly affecting the aspect of the manual.  The spurious
          call might also be the consequence of using a buggy \`make' (AIX,
          DU, IRIX).  You might want to install the \`Texinfo' package or
          the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
     file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
     if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
     fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
     touch $file
     ;;
 
   tar)
     shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
 
     # We have already tried tar in the generic part.
     # Look for gnutar/gtar before invocation to avoid ugly error
@@ -323,8 +340,8 @@ WARNING: I can't seem to be able to run \`tar' with the given arguments.
 
   *)
     echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
          proper tools for further handling them.  Check the \`README' file,
          it often tells you about the needed prerequisites for installing
          this package.  You may also peek at any GNU archive site, in case
@@ -334,3 +351,10 @@ WARNING: \`$1' is needed, and you do not seem to have it handy on your
 esac
 
 exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/font/xfree86-type1/mkinstalldirs b/font/xfree86-type1/mkinstalldirs
index d2d5f21b6..259dbfcd3 100644
--- a/font/xfree86-type1/mkinstalldirs
+++ b/font/xfree86-type1/mkinstalldirs
@@ -1,21 +1,33 @@
 #! /bin/sh
 # mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+
+scriptversion=2005-06-29.22
+
+# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
 # Created: 1993-05-16
-# Public domain
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
 
 errstatus=0
-dirmode=""
+dirmode=
 
 usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to <bug-automake@gnu.org>."
 
 # process command line arguments
 while test $# -gt 0 ; do
   case $1 in
     -h | --help | --h*)         # -h for help
-      echo "$usage" 1>&2
-      exit 0
+      echo "$usage"
+      exit $?
       ;;
     -m)                         # -m PERM arg
       shift
@@ -23,6 +35,10 @@ while test $# -gt 0 ; do
       dirmode=$1
       shift
       ;;
+    --version)
+      echo "$0 $scriptversion"
+      exit $?
+      ;;
     --)                         # stop option processing
       shift
       break
@@ -50,30 +66,58 @@ case $# in
   0) exit 0 ;;
 esac
 
+# Solaris 8's mkdir -p isn't thread-safe.  If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error.  This is a problem when calling mkinstalldirs
+# from a parallel make.  We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
 case $dirmode in
   '')
-    if mkdir -p -- . 2>/dev/null; then
+    if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
       echo "mkdir -p -- $*"
       exec mkdir -p -- "$@"
+    else
+      # On NextStep and OpenStep, the `mkdir' command does not
+      # recognize any option.  It will interpret all options as
+      # directories to create, and then abort because `.' already
+      # exists.
+      test -d ./-p && rmdir ./-p
+      test -d ./--version && rmdir ./--version
     fi
     ;;
   *)
-    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+    if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+       test ! -d ./--version; then
       echo "mkdir -m $dirmode -p -- $*"
       exec mkdir -m "$dirmode" -p -- "$@"
+    else
+      # Clean up after NextStep and OpenStep mkdir.
+      for d in ./-m ./-p ./--version "./$dirmode";
+      do
+        test -d $d && rmdir $d
+      done
     fi
     ;;
 esac
 
 for file
 do
-  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+  case $file in
+    /*) pathcomp=/ ;;
+    *)  pathcomp= ;;
+  esac
+  oIFS=$IFS
+  IFS=/
+  set fnord $file
   shift
+  IFS=$oIFS
 
-  pathcomp=
   for d
   do
-    pathcomp="$pathcomp$d"
+    test "x$d" = x && continue
+
+    pathcomp=$pathcomp$d
     case $pathcomp in
       -*) pathcomp=./$pathcomp ;;
     esac
@@ -84,21 +128,21 @@ do
       mkdir "$pathcomp" || lasterr=$?
 
       if test ! -d "$pathcomp"; then
-  	errstatus=$lasterr
+	errstatus=$lasterr
       else
-  	if test ! -z "$dirmode"; then
+	if test ! -z "$dirmode"; then
 	  echo "chmod $dirmode $pathcomp"
-    	  lasterr=""
-  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
+	  lasterr=
+	  chmod "$dirmode" "$pathcomp" || lasterr=$?
 
-  	  if test ! -z "$lasterr"; then
-  	    errstatus=$lasterr
-  	  fi
-  	fi
+	  if test ! -z "$lasterr"; then
+	    errstatus=$lasterr
+	  fi
+	fi
       fi
     fi
 
-    pathcomp="$pathcomp/"
+    pathcomp=$pathcomp/
   done
 done
 
@@ -107,5 +151,8 @@ exit $errstatus
 # Local Variables:
 # mode: shell-script
 # sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
 # End:
-# mkinstalldirs ends here