regenerate with OpenBSD autotools

4 files changed, 795 insertions, 485 deletions

diff --git a/lib/libfontenc/INSTALL b/lib/libfontenc/INSTALL
index e69de29bb..23e5f25d0 100644
--- a/lib/libfontenc/INSTALL
+++ b/lib/libfontenc/INSTALL
@@ -0,0 +1,236 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).  Here is a another example:
+
+     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
diff --git a/lib/libfontenc/config.guess b/lib/libfontenc/config.guess
index 2fc3acce2..917bbc50f 100644
--- a/lib/libfontenc/config.guess
+++ b/lib/libfontenc/config.guess
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2003-06-17'
+timestamp='2005-07-08'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -17,13 +17,15 @@ timestamp='2003-06-17'
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
 #
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+
 # Originally written by Per Bothner <per@bothner.com>.
 # Please send patches to <config-patches@gnu.org>.  Submit a context
 # diff and a properly formatted ChangeLog entry.
@@ -53,7 +55,7 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -66,11 +68,11 @@ Try \`$me --help' for more information."
 while test $# -gt 0 ; do
   case $1 in
     --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
+       echo "$timestamp" ; exit ;;
     --version | -v )
-       echo "$version" ; exit 0 ;;
+       echo "$version" ; exit ;;
     --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
+       echo "$usage"; exit ;;
     -- )     # Stop option processing
        shift; break ;;
     - )	# Use stdin as input.
@@ -123,7 +125,7 @@ case $CC_FOR_BUILD,$HOST_CC,$CC in
 	;;
  ,,*)   CC_FOR_BUILD=$CC ;;
  ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ;'
+esac ; set_cc_for_build= ;'
 
 # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
 # (ghazi@noc.rutgers.edu 1994-08-24)
@@ -136,13 +138,6 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
-## for Red Hat Linux
-if test -f /etc/redhat-release ; then
-    VENDOR=redhat ;
-else
-    VENDOR= ;
-fi
-
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
@@ -203,50 +198,29 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# contains redundant information, the shorter form:
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
 	echo "${machine}-${os}${release}"
-	exit 0 ;;
-    amiga:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    arc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    hp300:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mac68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    macppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme68k:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvme88k:OpenBSD:*:*)
-	echo m88k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    mvmeppc:OpenBSD:*:*)
-	echo powerpc-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    pmax:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sgi:OpenBSD:*:*)
-	echo mipseb-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    sun3:OpenBSD:*:*)
-	echo m68k-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
-    wgrisc:OpenBSD:*:*)
-	echo mipsel-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:OpenBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
-	exit 0 ;;
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
     alpha:OSF1:*:*)
-	if test $UNAME_RELEASE = "V4.0"; then
+	case $UNAME_RELEASE in
+	*4.0)
 		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-	fi
+		;;
+	*5.*)
+	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
 	# According to Compaq, /usr/sbin/psrinfo has been available on
 	# OSF/1 and Tru64 systems produced since 1995.  I hope that
 	# covers most systems running today.  This code pipes the CPU
@@ -284,42 +258,49 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	    "EV7.9 (21364A)")
 		UNAME_MACHINE="alphaev79" ;;
 	esac
+	# A Pn.n version is a patched version.
 	# A Vn.n version is a released version.
 	# A Tn.n version is a released field test version.
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit 0 ;;
-    Alpha*:OpenVMS:*:*)
-	echo alpha-hp-vms
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit ;;
     Alpha\ *:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# Should we change UNAME_MACHINE based on the output of uname instead
 	# of the specific Alpha model?
 	echo alpha-pc-interix
-	exit 0 ;;
+	exit ;;
     21064:Windows_NT:50:3)
 	echo alpha-dec-winnt3.5
-	exit 0 ;;
+	exit ;;
     Amiga*:UNIX_System_V:4.0:*)
 	echo m68k-unknown-sysv4
-	exit 0;;
+	exit ;;
     *:[Aa]miga[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit 0 ;;
+	exit ;;
     *:[Mm]orph[Oo][Ss]:*:*)
 	echo ${UNAME_MACHINE}-unknown-morphos
-	exit 0 ;;
+	exit ;;
     *:OS/390:*:*)
 	echo i370-ibm-openedition
-	exit 0 ;;
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+        echo powerpc-ibm-os400
+	exit ;;
     arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
 	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit 0;;
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
     SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
 	echo hppa1.1-hitachi-hiuxmpp
-	exit 0;;
+	exit ;;
     Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
 	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
 	if test "`(/bin/universe) 2>/dev/null`" = att ; then
@@ -327,32 +308,32 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	else
 		echo pyramid-pyramid-bsd
 	fi
-	exit 0 ;;
+	exit ;;
     NILE*:*:*:dcosx)
 	echo pyramid-pyramid-svr4
-	exit 0 ;;
+	exit ;;
     DRS?6000:unix:4.0:6*)
 	echo sparc-icl-nx6
-	exit 0 ;;
-    DRS?6000:UNIX_SV:4.2*:7*)
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
 	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7 && exit 0 ;;
+	    sparc) echo sparc-icl-nx7; exit ;;
 	esac ;;
     sun4H:SunOS:5.*:*)
 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     i86pc:SunOS:5.*:*)
 	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
 	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
 	# it's likely to be more like Solaris than SunOS4.
 	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     sun4*:SunOS:*:*)
 	case "`/usr/bin/arch -k`" in
 	    Series*|S4*)
@@ -361,10 +342,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	esac
 	# Japanese Language versions have a version number like `4.1.3-JL'.
 	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit 0 ;;
+	exit ;;
     sun3*:SunOS:*:*)
 	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     sun*:*:4.2BSD:*)
 	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
 	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
@@ -376,10 +357,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 		echo sparc-sun-sunos${UNAME_RELEASE}
 		;;
 	esac
-	exit 0 ;;
+	exit ;;
     aushp:SunOS:*:*)
 	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     # The situation for MiNT is a little confusing.  The machine name
     # can be virtually everything (everything which is not
     # "atarist" or "atariste" at least should have a processor
@@ -390,37 +371,40 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     # be no problem.
     atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
         echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
 	echo m68k-atari-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
         echo m68k-atari-mint${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
         echo m68k-milan-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
         echo m68k-hades-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
     *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
         echo m68k-unknown-mint${UNAME_RELEASE}
-        exit 0 ;;
+        exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
     powerpc:machten:*:*)
 	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     RISC*:Mach:*:*)
 	echo mips-dec-mach_bsd4.3
-	exit 0 ;;
+	exit ;;
     RISC*:ULTRIX:*:*)
 	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     VAX*:ULTRIX*:*:*)
 	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     2020:CLIX:*:* | 2430:CLIX:*:*)
 	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     mips:*:*:UMIPS | mips:*:*:RISCos)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -444,32 +428,33 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	  exit (-1);
 	}
 EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c \
-	  && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
-	  && exit 0
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
 	echo mips-mips-riscos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     Motorola:PowerMAX_OS:*:*)
 	echo powerpc-motorola-powermax
-	exit 0 ;;
+	exit ;;
     Motorola:*:4.3:PL8-*)
 	echo powerpc-harris-powermax
-	exit 0 ;;
+	exit ;;
     Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
 	echo powerpc-harris-powermax
-	exit 0 ;;
+	exit ;;
     Night_Hawk:Power_UNIX:*:*)
 	echo powerpc-harris-powerunix
-	exit 0 ;;
+	exit ;;
     m88k:CX/UX:7*:*)
 	echo m88k-harris-cxux7
-	exit 0 ;;
+	exit ;;
     m88k:*:4*:R4*)
 	echo m88k-motorola-sysv4
-	exit 0 ;;
+	exit ;;
     m88k:*:3*:R3*)
 	echo m88k-motorola-sysv3
-	exit 0 ;;
+	exit ;;
     AViiON:dgux:*:*)
         # DG/UX returns AViiON for all architectures
         UNAME_PROCESSOR=`/usr/bin/uname -p`
@@ -485,29 +470,29 @@ EOF
 	else
 	    echo i586-dg-dgux${UNAME_RELEASE}
 	fi
- 	exit 0 ;;
+ 	exit ;;
     M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
 	echo m88k-dolphin-sysv3
-	exit 0 ;;
+	exit ;;
     M88*:*:R3*:*)
 	# Delta 88k system running SVR3
 	echo m88k-motorola-sysv3
-	exit 0 ;;
+	exit ;;
     XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
 	echo m88k-tektronix-sysv3
-	exit 0 ;;
+	exit ;;
     Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
 	echo m68k-tektronix-bsd
-	exit 0 ;;
+	exit ;;
     *:IRIX*:*:*)
 	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit 0 ;;
+	exit ;;
     ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix      # uname -m gives an 8 hex-code CPU id
-	exit 0 ;;              # Note that: echo "'`uname -s`'" gives 'AIX '
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
     i*86:AIX:*:*)
 	echo i386-ibm-aix
-	exit 0 ;;
+	exit ;;
     ia64:AIX:*:*)
 	if [ -x /usr/bin/oslevel ] ; then
 		IBM_REV=`/usr/bin/oslevel`
@@ -515,7 +500,7 @@ EOF
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
 	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-	exit 0 ;;
+	exit ;;
     *:AIX:2:3)
 	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
 		eval $set_cc_for_build
@@ -530,14 +515,18 @@ EOF
 			exit(0);
 			}
 EOF
-		$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
-		echo rs6000-ibm-aix3.2.5
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
 	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
 		echo rs6000-ibm-aix3.2.4
 	else
 		echo rs6000-ibm-aix3.2
 	fi
-	exit 0 ;;
+	exit ;;
     *:AIX:*:[45])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
@@ -551,28 +540,28 @@ EOF
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
 	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit 0 ;;
+	exit ;;
     *:AIX:*:*)
 	echo rs6000-ibm-aix
-	exit 0 ;;
+	exit ;;
     ibmrt:4.4BSD:*|romp-ibm:BSD:*)
 	echo romp-ibm-bsd4.4
-	exit 0 ;;
+	exit ;;
     ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
 	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit 0 ;;                           # report: romp-ibm BSD 4.3
+	exit ;;                             # report: romp-ibm BSD 4.3
     *:BOSX:*:*)
 	echo rs6000-bull-bosx
-	exit 0 ;;
+	exit ;;
     DPX/2?00:B.O.S.:*:*)
 	echo m68k-bull-sysv3
-	exit 0 ;;
+	exit ;;
     9000/[34]??:4.3bsd:1.*:*)
 	echo m68k-hp-bsd
-	exit 0 ;;
+	exit ;;
     hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
 	echo m68k-hp-bsd4.4
-	exit 0 ;;
+	exit ;;
     9000/[34678]??:HP-UX:*:*)
 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	case "${UNAME_MACHINE}" in
@@ -634,9 +623,19 @@ EOF
 	esac
 	if [ ${HP_ARCH} = "hppa2.0w" ]
 	then
-	    # avoid double evaluation of $set_cc_for_build
-	    test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep __LP64__ >/dev/null
 	    then
 		HP_ARCH="hppa2.0w"
 	    else
@@ -644,11 +643,11 @@ EOF
 	    fi
 	fi
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit 0 ;;
+	exit ;;
     ia64:HP-UX:*:*)
 	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
 	echo ia64-hp-hpux${HPUX_REV}
-	exit 0 ;;
+	exit ;;
     3050*:HI-UX:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -676,150 +675,166 @@ EOF
 	  exit (0);
 	}
 EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
 	echo unknown-hitachi-hiuxwe2
-	exit 0 ;;
+	exit ;;
     9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
 	echo hppa1.1-hp-bsd
-	exit 0 ;;
+	exit ;;
     9000/8??:4.3bsd:*:*)
 	echo hppa1.0-hp-bsd
-	exit 0 ;;
+	exit ;;
     *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
 	echo hppa1.0-hp-mpeix
-	exit 0 ;;
+	exit ;;
     hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
 	echo hppa1.1-hp-osf
-	exit 0 ;;
+	exit ;;
     hp8??:OSF1:*:*)
 	echo hppa1.0-hp-osf
-	exit 0 ;;
+	exit ;;
     i*86:OSF1:*:*)
 	if [ -x /usr/sbin/sysversion ] ; then
 	    echo ${UNAME_MACHINE}-unknown-osf1mk
 	else
 	    echo ${UNAME_MACHINE}-unknown-osf1
 	fi
-	exit 0 ;;
+	exit ;;
     parisc*:Lites*:*:*)
 	echo hppa1.1-hp-lites
-	exit 0 ;;
+	exit ;;
     C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
 	echo c1-convex-bsd
-        exit 0 ;;
+        exit ;;
     C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-        exit 0 ;;
+        exit ;;
     C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
 	echo c34-convex-bsd
-        exit 0 ;;
+        exit ;;
     C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
 	echo c38-convex-bsd
-        exit 0 ;;
+        exit ;;
     C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
 	echo c4-convex-bsd
-        exit 0 ;;
+        exit ;;
     CRAY*Y-MP:*:*:*)
 	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*[A-Z]90:*:*:*)
 	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
 	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
 	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
 	      -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*TS:*:*:*)
 	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*T3E:*:*:*)
 	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     CRAY*SV1:*:*:*)
 	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit 0 ;;
+	exit ;;
     *:UNICOS/mp:*:*)
-	echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' 
-	exit 0 ;;
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
 	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
         FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
         FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
         echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit 0 ;;
+        exit ;;
+    5000:UNIX_System_V:4.*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
 	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     sparc*:BSD/OS:*:*)
 	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:BSD/OS:*:*)
 	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit 0 ;;
-    *:FreeBSD:*:*|*:GNU/FreeBSD:*:*)
-	# Determine whether the default compiler uses glibc.
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#if __GLIBC__ >= 2
-	LIBC=gnu
-	#else
-	LIBC=
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
-	exit 0 ;;
+	exit ;;
+    *:FreeBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
-	exit 0 ;;
+	exit ;;
     i*:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
-	exit 0 ;;
+	exit ;;
+    i*:windows32*:*)
+    	# uname -m includes "-pc" on this system.
+    	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
-	exit 0 ;;
+	exit ;;
     x86:Interix*:[34]*)
 	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
-	exit 0 ;;
+	exit ;;
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
-	exit 0 ;;
+	exit ;;
     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
 	# UNAME_MACHINE based on the output of uname instead of i386?
 	echo i586-pc-interix
-	exit 0 ;;
+	exit ;;
     i*:UWIN*:*)
 	echo ${UNAME_MACHINE}-pc-uwin
-	exit 0 ;;
+	exit ;;
+    amd64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
     p*:CYGWIN*:*)
 	echo powerpcle-unknown-cygwin
-	exit 0 ;;
+	exit ;;
     prep*:SunOS:5.*:*)
 	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit 0 ;;
+	exit ;;
     *:GNU:*:*)
+	# the GNU system
 	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit 0 ;;
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	exit ;;
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
-	exit 0 ;;
+	exit ;;
     arm*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     cris:Linux:*:*)
 	echo cris-axis-linux-gnu
-	exit 0 ;;
+	exit ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+    	echo frv-unknown-linux-gnu
+	exit ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-${VENDOR:-unknown}-linux-gnu
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
     m68*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     mips:Linux:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
@@ -837,7 +852,7 @@ EOF
 	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -856,14 +871,14 @@ EOF
 	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
-	test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     ppc:Linux:*:*)
-	echo powerpc-${VENDOR:-unknown}-linux-gnu
-	exit 0 ;;
+	echo powerpc-unknown-linux-gnu
+	exit ;;
     ppc64:Linux:*:*)
-	echo powerpc64-${VENDOR:-unknown}-linux-gnu
-	exit 0 ;;
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
 	  EV5)   UNAME_MACHINE=alphaev5 ;;
@@ -877,7 +892,7 @@ EOF
 	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
 	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
 	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-	exit 0 ;;
+	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
@@ -885,25 +900,25 @@ EOF
 	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
 	  *)    echo hppa-unknown-linux-gnu ;;
 	esac
-	exit 0 ;;
+	exit ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
 	echo hppa64-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-${VENDOR:-ibm}-linux-gnu
-	exit 0 ;;
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit ;;
     sh64*:Linux:*:*)
     	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     sh*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit 0 ;;
+	exit ;;
     x86_64:Linux:*:*)
-	echo x86_64-${VENDOR:-unknown}-linux-gnu
-	exit 0 ;;
+	echo x86_64-unknown-linux-gnu
+	exit ;;
     i*86:Linux:*:*)
 	# The BFD linker knows what the default object file format is, so
 	# first see if it will tell us. cd to the root directory to prevent
@@ -921,15 +936,15 @@ EOF
 		;;
 	  a.out-i386-linux)
 		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit 0 ;;
+		exit ;;
 	  coff-i386)
 		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit 0 ;;
+		exit ;;
 	  "")
 		# Either a pre-BFD a.out linker (linux-gnuoldld) or
 		# one that does not give us useful --help.
 		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit 0 ;;
+		exit ;;
 	esac
 	# Determine whether the default compiler is a.out or elf
 	eval $set_cc_for_build
@@ -952,17 +967,23 @@ EOF
 	LIBC=gnuaout
 	#endif
 	#endif
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
-	test x"${LIBC}" != x && echo "${UNAME_MACHINE}-${VENDOR:-pc}-linux-${LIBC}" && exit 0
-	test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+	test x"${LIBC}" != x && {
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+		exit
+	}
+	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
 	;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
 	# earlier versions are messed up and put the nodename in both
 	# sysname and nodename.
 	echo i386-sequent-sysv4
-	exit 0 ;;
+	exit ;;
     i*86:UNIX_SV:4.2MP:2.*)
         # Unixware is an offshoot of SVR4, but it has its own version
         # number series starting with 2...
@@ -970,24 +991,27 @@ EOF
 	# I just have to hope.  -- rms.
         # Use sysv4.2uw... so that sysv4* matches it.
 	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit 0 ;;
+	exit ;;
     i*86:OS/2:*:*)
 	# If we were able to find `uname', then EMX Unix compatibility
 	# is probably installed.
 	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit 0 ;;
+	exit ;;
     i*86:XTS-300:*:STOP)
 	echo ${UNAME_MACHINE}-unknown-stop
-	exit 0 ;;
+	exit ;;
     i*86:atheos:*:*)
 	echo ${UNAME_MACHINE}-unknown-atheos
-	exit 0 ;;
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
     i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
 	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     i*86:*DOS:*:*)
 	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit 0 ;;
+	exit ;;
     i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
 	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
 	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
@@ -995,15 +1019,16 @@ EOF
 	else
 		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
 	fi
-	exit 0 ;;
-    i*86:*:5:[78]*)
+	exit ;;
+    i*86:*:5:[678]*)
+    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
 	case `/bin/uname -X | grep "^Machine"` in
 	    *486*)	     UNAME_MACHINE=i486 ;;
 	    *Pentium)	     UNAME_MACHINE=i586 ;;
 	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
 	esac
 	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-	exit 0 ;;
+	exit ;;
     i*86:*:3.2:*)
 	if test -f /usr/options/cb.name; then
 		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
@@ -1021,73 +1046,73 @@ EOF
 	else
 		echo ${UNAME_MACHINE}-pc-sysv32
 	fi
-	exit 0 ;;
+	exit ;;
     pc:*:*:*)
 	# Left here for compatibility:
         # uname -m prints for DJGPP always 'pc', but it prints nothing about
         # the processor, so we play safe by assuming i386.
 	echo i386-pc-msdosdjgpp
-        exit 0 ;;
+        exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
-	exit 0 ;;
+	exit ;;
     paragon:*:*:*)
 	echo i860-intel-osf1
-	exit 0 ;;
+	exit ;;
     i860:*:4.*:*) # i860-SVR4
 	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
 	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
 	else # Add other i860-SVR4 vendors below as they are discovered.
 	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
 	fi
-	exit 0 ;;
+	exit ;;
     mini*:CTIX:SYS*5:*)
 	# "miniframe"
 	echo m68010-convergent-sysv
-	exit 0 ;;
+	exit ;;
     mc68k:UNIX:SYSTEM5:3.51m)
 	echo m68k-convergent-sysv
-	exit 0 ;;
+	exit ;;
     M680?0:D-NIX:5.3:*)
 	echo m68k-diab-dnix
-	exit 0 ;;
-    M68*:*:R3V[567]*:*)
-	test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
-    3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
 	OS_REL=''
 	test -r /etc/.relid \
 	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
 	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
 	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
         /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && echo i486-ncr-sysv4 && exit 0 ;;
+          && { echo i486-ncr-sysv4; exit; } ;;
     m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
 	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     mc68030:UNIX_System_V:4.*:*)
 	echo m68k-atari-sysv4
-	exit 0 ;;
+	exit ;;
     TSUNAMI:LynxOS:2.*:*)
 	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     rs6000:LynxOS:2.*:*)
 	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
 	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SM[BE]S:UNIX_SV:*:*)
 	echo mips-dde-sysv${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     RM*:ReliantUNIX-*:*:*)
 	echo mips-sni-sysv4
-	exit 0 ;;
+	exit ;;
     RM*:SINIX-*:*:*)
 	echo mips-sni-sysv4
-	exit 0 ;;
+	exit ;;
     *:SINIX-*:*:*)
 	if uname -p 2>/dev/null >/dev/null ; then
 		UNAME_MACHINE=`(uname -p) 2>/dev/null`
@@ -1095,68 +1120,73 @@ EOF
 	else
 		echo ns32k-sni-sysv
 	fi
-	exit 0 ;;
+	exit ;;
     PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
                       # says <Richard.M.Bartel@ccMail.Census.GOV>
         echo i586-unisys-sysv4
-        exit 0 ;;
+        exit ;;
     *:UNIX_System_V:4*:FTX*)
 	# From Gerald Hewes <hewes@openmarket.com>.
 	# How about differentiating between stratus architectures? -djm
 	echo hppa1.1-stratus-sysv4
-	exit 0 ;;
+	exit ;;
     *:*:*:FTX*)
 	# From seanf@swdc.stratus.com.
 	echo i860-stratus-sysv4
-	exit 0 ;;
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
     *:VOS:*:*)
 	# From Paul.Green@stratus.com.
 	echo hppa1.1-stratus-vos
-	exit 0 ;;
+	exit ;;
     mc68*:A/UX:*:*)
 	echo m68k-apple-aux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     news*:NEWS-OS:6*:*)
 	echo mips-sony-newsos6
-	exit 0 ;;
+	exit ;;
     R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
 	if [ -d /usr/nec ]; then
 	        echo mips-nec-sysv${UNAME_RELEASE}
 	else
 	        echo mips-unknown-sysv${UNAME_RELEASE}
 	fi
-        exit 0 ;;
+        exit ;;
     BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
 	echo powerpc-be-beos
-	exit 0 ;;
+	exit ;;
     BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
 	echo powerpc-apple-beos
-	exit 0 ;;
+	exit ;;
     BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
 	echo i586-pc-beos
-	exit 0 ;;
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SX-5:SUPER-UX:*:*)
 	echo sx5-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     SX-6:SUPER-UX:*:*)
 	echo sx6-nec-superux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Rhapsody:*:*)
 	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Darwin:*:*)
-	case `uname -p` in
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
 	    *86) UNAME_PROCESSOR=i686 ;;
-	    powerpc) UNAME_PROCESSOR=powerpc ;;
+	    unknown) UNAME_PROCESSOR=powerpc ;;
 	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
 	UNAME_PROCESSOR=`uname -p`
 	if test "$UNAME_PROCESSOR" = "x86"; then
@@ -1164,22 +1194,25 @@ EOF
 		UNAME_MACHINE=pc
 	fi
 	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:QNX:*:4*)
 	echo i386-pc-qnx
-	exit 0 ;;
-    NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
 	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:NonStop-UX:*:*)
 	echo mips-compaq-nonstopux
-	exit 0 ;;
+	exit ;;
     BS2000:POSIX*:*:*)
 	echo bs2000-siemens-sysv
-	exit 0 ;;
+	exit ;;
     DS/*:UNIX_System_V:*:*)
 	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
     *:Plan9:*:*)
 	# "uname -m" is not consistent, so use $cputype instead. 386
 	# is converted to i386 for consistency with other x86
@@ -1190,28 +1223,44 @@ EOF
 	    UNAME_MACHINE="$cputype"
 	fi
 	echo ${UNAME_MACHINE}-unknown-plan9
-	exit 0 ;;
+	exit ;;
     *:TOPS-10:*:*)
 	echo pdp10-unknown-tops10
-	exit 0 ;;
+	exit ;;
     *:TENEX:*:*)
 	echo pdp10-unknown-tenex
-	exit 0 ;;
+	exit ;;
     KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
 	echo pdp10-dec-tops20
-	exit 0 ;;
+	exit ;;
     XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
 	echo pdp10-xkl-tops20
-	exit 0 ;;
+	exit ;;
     *:TOPS-20:*:*)
 	echo pdp10-unknown-tops20
-	exit 0 ;;
+	exit ;;
     *:ITS:*:*)
 	echo pdp10-unknown-its
-	exit 0 ;;
+	exit ;;
     SEI:*:*:SEIUX)
         echo mips-sei-seiux${UNAME_RELEASE}
-	exit 0 ;;
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
@@ -1243,7 +1292,7 @@ main ()
 #endif
 
 #if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix"); exit (0);
+  printf ("arm-acorn-riscix\n"); exit (0);
 #endif
 
 #if defined (hp300) && !defined (hpux)
@@ -1332,11 +1381,12 @@ main ()
 }
 EOF
 
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
 
 # Apollos put the system type in the environment.
 
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
 
 # Convex versions that predate uname can use getsysinfo(1)
 
@@ -1345,22 +1395,22 @@ then
     case `getsysinfo -f cpu_type` in
     c1*)
 	echo c1-convex-bsd
-	exit 0 ;;
+	exit ;;
     c2*)
 	if getsysinfo -f scalar_acc
 	then echo c32-convex-bsd
 	else echo c2-convex-bsd
 	fi
-	exit 0 ;;
+	exit ;;
     c34*)
 	echo c34-convex-bsd
-	exit 0 ;;
+	exit ;;
     c38*)
 	echo c38-convex-bsd
-	exit 0 ;;
+	exit ;;
     c4*)
 	echo c4-convex-bsd
-	exit 0 ;;
+	exit ;;
     esac
 fi
 
@@ -1371,7 +1421,9 @@ This script, last modified $timestamp, has failed to recognize
 the operating system you are using. It is advised that you
 download the most up to date version of the config scripts from
 
-    ftp://ftp.gnu.org/pub/gnu/config/
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+and
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
 
 If the version you run ($0) is already up to date, please
 send the following data and any information you think might be
diff --git a/lib/libfontenc/config.sub b/lib/libfontenc/config.sub
index 6b2ff9f6a..1c366dfde 100644
--- a/lib/libfontenc/config.sub
+++ b/lib/libfontenc/config.sub
@@ -1,9 +1,9 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
 
-timestamp='2003-06-18'
+timestamp='2005-07-08'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -21,14 +21,15 @@ timestamp='2003-06-18'
 #
 # You should have received a copy of the GNU General Public License
 # along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330,
-# Boston, MA 02111-1307, USA.
-
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
 # configuration script generated by Autoconf, you may include it under
 # the same distribution terms that you use for the rest of that program.
 
+
 # Please send patches to <config-patches@gnu.org>.  Submit a context
 # diff and a properly formatted ChangeLog entry.
 #
@@ -70,7 +71,7 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
@@ -83,11 +84,11 @@ Try \`$me --help' for more information."
 while test $# -gt 0 ; do
   case $1 in
     --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit 0 ;;
+       echo "$timestamp" ; exit ;;
     --version | -v )
-       echo "$version" ; exit 0 ;;
+       echo "$version" ; exit ;;
     --help | --h* | -h )
-       echo "$usage"; exit 0 ;;
+       echo "$usage"; exit ;;
     -- )     # Stop option processing
        shift; break ;;
     - )	# Use stdin as input.
@@ -99,7 +100,7 @@ while test $# -gt 0 ; do
     *local*)
        # First pass through any local machine types.
        echo $1
-       exit 0;;
+       exit ;;
 
     * )
        break ;;
@@ -118,7 +119,8 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
+  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
     ;;
@@ -144,7 +146,7 @@ case $os in
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis)
+	-apple | -axis | -knuth | -cray)
 		os=
 		basic_machine=$1
 		;;
@@ -228,14 +230,16 @@ case $basic_machine in
 	| a29k \
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
 	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| bfin \
 	| c4x | clipper \
 	| d10v | d30v | dlx | dsp16xx \
 	| fr30 | frv \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
-	| ip2k \
-	| m32r | m68000 | m68k | m88k | mcore \
+	| ip2k | iq2000 \
+	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
@@ -244,31 +248,37 @@ case $basic_machine in
 	| mips64vr4100 | mips64vr4100el \
 	| mips64vr4300 | mips64vr4300el \
 	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
 	| mipsisa32 | mipsisa32el \
 	| mipsisa32r2 | mipsisa32r2el \
 	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
 	| mipsisa64sb1 | mipsisa64sb1el \
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
+	| ms1 \
 	| msp430 \
 	| ns16k | ns32k \
-	| openrisc | or32 \
+	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
-	| s390 | s390x \
-	| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
-	| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \
+	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b \
 	| strongarm \
 	| tahoe | thumb | tic4x | tic80 | tron \
 	| v850 | v850e \
 	| we32k \
-	| x86 | xscale | xstormy16 | xtensa \
+	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
 	| z8k)
 		basic_machine=$basic_machine-unknown
 		;;
+	m32c)
+		basic_machine=$basic_machine-unknown
+		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
 		# Motorola 68HC11/12.
 		basic_machine=$basic_machine-unknown
@@ -296,19 +306,19 @@ case $basic_machine in
 	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* \
-	| bs2000-* \
+	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-	| clipper-* | cydra-* \
+	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
 	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
-	| ip2k-* \
-	| m32r-* \
+	| ip2k-* | iq2000-* \
+	| m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
@@ -317,34 +327,40 @@ case $basic_machine in
 	| mips64vr4100-* | mips64vr4100el-* \
 	| mips64vr4300-* | mips64vr4300el-* \
 	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
 	| mipsisa32-* | mipsisa32el-* \
 	| mipsisa32r2-* | mipsisa32r2el-* \
 	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
 	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| ms1-* \
 	| msp430-* \
-	| none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| s390-* | s390x-* \
-	| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
 	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
-	| x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
-	| xtensa-* \
+	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa-* \
 	| ymp-* \
 	| z8k-*)
 		;;
+	m32c-*)
+		;;
 	# Recognize the various machine names and aliases which stand
 	# for a CPU type and a company and sometimes even an OS.
 	386bsd)
@@ -361,6 +377,9 @@ case $basic_machine in
 		basic_machine=a29k-amd
 		os=-udi
 		;;
+    	abacus)
+		basic_machine=abacus-unknown
+		;;
 	adobe68k)
 		basic_machine=m68010-adobe
 		os=-scout
@@ -378,6 +397,9 @@ case $basic_machine in
 	amd64)
 		basic_machine=x86_64-pc
 		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	amdahl)
 		basic_machine=580-amdahl
 		os=-sysv
@@ -437,12 +459,27 @@ case $basic_machine in
 		basic_machine=j90-cray
 		os=-unicos
 		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16c)
+		basic_machine=cr16c-unknown
+		os=-elf
+		;;
 	crds | unos)
 		basic_machine=m68k-crds
 		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
 	cris | cris-* | etrax*)
 		basic_machine=cris-axis
 		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
 	da30 | da30-*)
 		basic_machine=m68k-da30
 		;;
@@ -465,6 +502,10 @@ case $basic_machine in
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
 	dpx20 | dpx20-*)
 		basic_machine=rs6000-bull
 		os=-bosx
@@ -643,10 +684,6 @@ case $basic_machine in
 	mips3*)
 		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
 		;;
-	mmix*)
-		basic_machine=mmix-knuth
-		os=-mmixware
-		;;
 	monitor)
 		basic_machine=m68k-rom68k
 		os=-coff
@@ -727,10 +764,6 @@ case $basic_machine in
 	np1)
 		basic_machine=np1-gould
 		;;
-	nv1)
-		basic_machine=nv1-cray
-		os=-unicosmp
-		;;
 	nsr-tandem)
 		basic_machine=nsr-tandem
 		;;
@@ -738,9 +771,12 @@ case $basic_machine in
 		basic_machine=hppa1.1-oki
 		os=-proelf
 		;;
-	or32 | or32-*)
+	openrisc | openrisc-*)
 		basic_machine=or32-unknown
-		os=-coff
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
 		;;
 	OSE68000 | ose68000)
 		basic_machine=m68000-ericsson
@@ -833,6 +869,12 @@ case $basic_machine in
 	rtpc | rtpc-*)
 		basic_machine=romp-ibm
 		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
 	sa29200)
 		basic_machine=a29k-amd
 		os=-udi
@@ -956,6 +998,10 @@ case $basic_machine in
 	tower | tower-32)
 		basic_machine=m68k-ncr
 		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
 	udi29k)
 		basic_machine=a29k-amd
 		os=-udi
@@ -999,6 +1045,10 @@ case $basic_machine in
 		basic_machine=hppa1.1-winbond
 		os=-proelf
 		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
 	xps | xps100)
 		basic_machine=xps100-honeywell
 		;;
@@ -1029,6 +1079,9 @@ case $basic_machine in
 	romp)
 		basic_machine=romp-ibm
 		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
 	rs6000)
 		basic_machine=rs6000-ibm
 		;;
@@ -1045,12 +1098,9 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
 	sparc | sparcv8 | sparcv9 | sparcv9b)
 		basic_machine=sparc-sun
 		;;
@@ -1124,19 +1174,21 @@ case $os in
 	      | -aos* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
-	      | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
 	      | -chorusos* | -chorusrdb* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei*)
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1154,12 +1206,15 @@ case $os in
 		os=`echo $os | sed -e 's|nto|nto-qnx|'`
 		;;
 	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
 	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
 		;;
 	-mac*)
 		os=`echo $os | sed -e 's|mac|macos|'`
 		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
 	-linux*)
 		os=`echo $os | sed -e 's|linux|linux-gnu|'`
 		;;
@@ -1172,6 +1227,9 @@ case $os in
 	-opened*)
 		os=-openedition
 		;;
+        -os400*)
+		os=-os400
+		;;
 	-wince*)
 		os=-wince
 		;;
@@ -1193,6 +1251,9 @@ case $os in
 	-atheos*)
 		os=-atheos
 		;;
+	-syllable*)
+		os=-syllable
+		;;
 	-386bsd)
 		os=-bsd
 		;;
@@ -1215,6 +1276,9 @@ case $os in
 	-sinix*)
 		os=-sysv4
 		;;
+        -tpf*)
+		os=-tpf
+		;;
 	-triton*)
 		os=-sysv3
 		;;
@@ -1251,6 +1315,9 @@ case $os in
 	-kaos*)
 		os=-kaos
 		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
 	-none)
 		;;
 	*)
@@ -1282,9 +1349,9 @@ case $basic_machine in
 	arm*-semi)
 		os=-aout
 		;;
-	c4x-* | tic4x-*)
-		os=-coff
-		;;
+    c4x-* | tic4x-*)
+        os=-coff
+        ;;
 	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
@@ -1328,9 +1395,15 @@ case $basic_machine in
 	*-be)
 		os=-beos
 		;;
+	*-haiku)
+		os=-haiku
+		;;
 	*-ibm)
 		os=-aix
 		;;
+    	*-knuth)
+		os=-mmixware
+		;;
 	*-wec)
 		os=-proelf
 		;;
@@ -1463,9 +1536,15 @@ case $basic_machine in
 			-mvs* | -opened*)
 				vendor=ibm
 				;;
+			-os400*)
+				vendor=ibm
+				;;
 			-ptx*)
 				vendor=sequent
 				;;
+			-tpf*)
+				vendor=ibm
+				;;
 			-vxsim* | -vxworks* | -windiss*)
 				vendor=wrs
 				;;
@@ -1490,7 +1569,7 @@ case $basic_machine in
 esac
 
 echo $basic_machine$os
-exit 0
+exit
 
 # Local variables:
 # eval: (add-hook 'write-file-hooks 'time-stamp)
diff --git a/lib/libfontenc/ltmain.sh b/lib/libfontenc/ltmain.sh
index 0223495a0..ef5ee686b 100644
--- a/lib/libfontenc/ltmain.sh
+++ b/lib/libfontenc/ltmain.sh
@@ -46,16 +46,10 @@ PACKAGE=libtool
 VERSION=1.5.22
 TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)"
 
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
   setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
 fi
 
 # Check that we have a working $echo.
@@ -111,14 +105,12 @@ esac
 # These must not be set unconditionally because not all systems understand
 # e.g. LANG=C (notably SCO).
 # We save the old values to restore during execute mode.
-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
-  eval "if test \"\${$lt_var+set}\" = set; then
-         save_$lt_var=\$$lt_var
-         $lt_var=C
-         export $lt_var
-       fi"
-done
+if test "${LC_ALL+set}" = set; then
+  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+fi
+if test "${LANG+set}" = set; then
+  save_LANG="$LANG"; LANG=C; export LANG
+fi
 
 # Make sure IFS has a sensible default
 lt_nl='
@@ -144,8 +136,6 @@ duplicate_deps=no
 preserve_args=
 lo2o="s/\\.lo\$/.${objext}/"
 o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
 
 #####################################
 # Shell function definitions:
@@ -337,17 +327,7 @@ func_extract_archives ()
 	*) my_xabs=`pwd`"/$my_xlib" ;;
       esac
       my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
-      my_xlib_u=$my_xlib
-      while :; do
-        case " $extracted_archives " in
-       *" $my_xlib_u "*)
-         extracted_serial=`expr $extracted_serial + 1`
-         my_xlib_u=lt$extracted_serial-$my_xlib ;;
-       *) break ;;
-       esac
-      done
-      extracted_archives="$extracted_archives $my_xlib_u"
-      my_xdir="$my_gentop/$my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib"
 
       $show "${rm}r $my_xdir"
       $run ${rm}r "$my_xdir"
@@ -778,7 +758,6 @@ if test -z "$show_help"; then
     *.f90) xform=f90 ;;
     *.for) xform=for ;;
     *.java) xform=java ;;
-    *.obj) xform=obj ;;
     esac
 
     libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
@@ -1159,9 +1138,8 @@ EOF
     for arg
     do
       case $arg in
-      -all-static | -static | -static-libtool-libs)
-    case $arg in
-    -all-static)
+      -all-static | -static)
+	if test "X$arg" = "X-all-static"; then
 	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
 	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
 	  fi
@@ -1169,20 +1147,12 @@ EOF
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=yes
-	  ;;
-    -static)
+	else
 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
 	    dlopen_self=$dlopen_self_static
 	  fi
 	  prefer_static_libs=built
-	  ;;
-    -static-libtool-libs)
-      if test -z "$pic_flag" && test -n "$link_static_flag"; then
-        dlopen_self=$dlopen_self_static
-      fi
-      prefer_static_libs=yes
-      ;;
-    esac
+	fi
 	build_libtool_libs=no
 	build_old_libs=yes
 	break
@@ -1742,7 +1712,7 @@ EOF
 	continue
 	;;
 
-      -static | -static-libtool-libs)
+      -static)
 	# The effects of -static are defined in a previous loop.
 	# We used to do the same as -all-static on platforms that
 	# didn't have a PIC flag, but the assumption that the effects
@@ -2103,6 +2073,17 @@ EOF
 	;;
     esac
     for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test "$linkmode,$pass" = "lib,link"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+	tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs="$tmp_deplibs"
+      fi
       if test "$linkmode,$pass" = "lib,link" ||
 	 test "$linkmode,$pass" = "prog,scan"; then
 	libs="$deplibs"
@@ -2364,20 +2345,20 @@ EOF
 	    # It is a libtool convenience library, so add in its objects.
 	    convenience="$convenience $ladir/$objdir/$old_library"
 	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
-	    tmp_libs=
-	    for deplib in $dependency_libs; do
-	      deplibs="$deplib $deplibs"
-              if test "X$duplicate_deps" = "Xyes" ; then
-	        case "$tmp_libs " in
-	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	        esac
-              fi
-	      tmp_libs="$tmp_libs $deplib"
-	    done
 	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
 	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
 	    exit $EXIT_FAILURE
 	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if test "X$duplicate_deps" = "Xyes" ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done
 	  continue
 	fi # $pass = conv
 
@@ -2520,9 +2501,7 @@ EOF
 
 	if test "$linkmode,$pass" = "prog,link"; then
 	  if test -n "$library_names" &&
-         { { test "$prefer_static_libs" = no ||
-             test "$prefer_static_libs,$installed" = "built,yes"; } ||
-           test -z "$old_library"; }; then
+	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
 	    # We need to hardcode the library path
 	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
 	      # Make sure the rpath contains only unique directories.
@@ -2574,7 +2553,7 @@ EOF
 	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
 	  if test "$installed" = no; then
 	    notinst_deplibs="$notinst_deplibs $lib"
-	    need_relink=yes
+	    test -z "$DESTDIR" && need_relink=yes
 	  fi
 	  # This is a shared library
 
@@ -2773,7 +2752,7 @@ EOF
 	    add_dir=
 	    add=
 	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes; then
+	    if test "$hardcode_direct" = yes && test -f $libdir/$linklib; then
 	      add="$libdir/$linklib"
 	    elif test "$hardcode_minus_L" = yes; then
 	      add_dir="-L$libdir"
@@ -3218,7 +3197,7 @@ EOF
 	  # which has an extra 1 added just for fun
 	  #
 	  case $version_type in
-	  darwin|linux|osf|windows|none)
+	  darwin|linux|osf|windows)
 	    current=`expr $number_major + $number_minor`
 	    age="$number_minor"
 	    revision="$number_revision"
@@ -3391,6 +3370,20 @@ EOF
 	  major=
 	  versuffix=
 	  verstring=""
+	else
+	  # XXX
+	  tmp=`echo $libname|sed -e 's,+,_,g' -e 's,-,_,g' -e 's,\.,_,g'`
+	  eval tmp2=\$${tmp}_ltversion
+	  if ! test -z "${SHARED_LIBS_LOG}"; then
+		  if ! test -f ${SHARED_LIBS_LOG}; then
+			  echo "# SHARED_LIBS+=	<libname>      <obsd version> # <orig version>" >${SHARED_LIBS_LOG}
+		  fi
+		  tmp4=`echo $libname|sed -e 's/^lib//'`
+		  printf "SHARED_LIBS +=\t%-20s %-8s # %s\n" "$tmp4" "$tmp2" "$versuffix" >>${SHARED_LIBS_LOG}
+	  fi
+	  if test -n "$versuffix" && test -n "$tmp2"; then
+	    versuffix=".$tmp2"
+	  fi
 	fi
 
 	# Check to see if the archive will have undefined symbols.
@@ -3442,11 +3435,11 @@ EOF
       fi
 
       # Eliminate all temporary directories.
-#      for path in $notinst_path; do
-#	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
-#	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
-#	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
-#      done
+      for path in $notinst_path; do
+	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+      done
 
       if test -n "$xrpath"; then
 	# If the user specified any rpath flags, then add them.
@@ -3547,12 +3540,13 @@ EOF
 	  int main() { return 0; }
 EOF
 	  $rm conftest
-      if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
+	  if test "$?" -eq 0 ; then
 	    ldd_output=`ldd conftest`
 	    for i in $deplibs; do
 	      name=`expr $i : '-l\(.*\)'`
 	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" != "0"; then
+              if test "$name" != "" && test "$name" -ne "0"; then
 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		  case " $predeps $postdeps " in
 		  *" $i "*)
@@ -3591,7 +3585,9 @@ EOF
 	      # If $name is empty we are operating on a -L argument.
               if test "$name" != "" && test "$name" != "0"; then
 		$rm conftest
-		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		$LTCC $LTCFLAGS -o conftest conftest.c $i
+		# Did it work?
+		if test "$?" -eq 0 ; then
 		  ldd_output=`ldd conftest`
 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 		    case " $predeps $postdeps " in
@@ -3623,7 +3619,7 @@ EOF
 		  droppeddeps=yes
 		  $echo
 		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $echo "*** make it link in!  You will probably need to install it or some"
+		  $echo "***  make it link in!  You will probably need to install it or some"
 		  $echo "*** library that it depends on before this library will be fully"
 		  $echo "*** functional.  Installing it before continuing would be even better."
 		fi
@@ -4268,14 +4264,12 @@ EOF
       reload_conv_objs=
       gentop=
       # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec and hope we can get by with
-      # turning comma into space..
+      # -Wl from whole_archive_flag_spec
       wl=
 
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
-	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-      reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
 	else
 	  gentop="$output_objdir/${obj}x"
 	  generated="$generated $gentop"
@@ -4723,16 +4717,16 @@ static const void *lt_preloaded_setup() {
           case $host in
           *cygwin* | *mingw* )
             if test -f "$output_objdir/${outputname}.def" ; then
-              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
-              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
             else
-              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
              fi
             ;;
           * )
-            compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-            finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+            finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
             ;;
           esac
 	  ;;
@@ -4747,13 +4741,13 @@ static const void *lt_preloaded_setup() {
 	# really was required.
 
 	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
       fi
 
       if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
 	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
+	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
@@ -4840,7 +4834,7 @@ static const void *lt_preloaded_setup() {
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
@@ -4877,7 +4871,7 @@ static const void *lt_preloaded_setup() {
 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
       fi
 
       # Quote $echo for shipping.
@@ -5284,18 +5278,6 @@ EOF
 Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-
 # The HP-UX ksh and POSIX shell print the target directory to stdout
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
@@ -5438,7 +5420,7 @@ else
 	  ;;
 	esac
 	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \$*\"
+      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
       exit $EXIT_FAILURE
     fi
   else
@@ -5624,7 +5606,7 @@ fi\
       done
       # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
       if test "$hardcode_automatic" = yes ; then
 	relink_command=
       fi
@@ -5969,9 +5951,9 @@ relink_command=\"$relink_command\""
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
+	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
 	  else
-	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
+	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
 	  fi
 
 	  $echo "$modename: warning: relinking \`$file'" 1>&2
@@ -6180,7 +6162,7 @@ relink_command=\"$relink_command\""
 	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
 	      outputname="$tmpdir/$file"
 	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
+	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
 
 	      $show "$relink_command"
 	      if $run eval "$relink_command"; then :
@@ -6300,40 +6282,6 @@ relink_command=\"$relink_command\""
     # Exit here if they wanted silent mode.
     test "$show" = : && exit $EXIT_SUCCESS
 
-    $echo "X----------------------------------------------------------------------" | $Xsed
-    $echo "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      $echo "   $libdir"
-    done
-    $echo
-    $echo "If you ever happen to want to link against installed libraries"
-    $echo "in a given directory, LIBDIR, you must either use libtool, and"
-    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    $echo "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      $echo "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      $echo "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      $echo "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      $echo "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    $echo
-    $echo "See any operating system documentation about shared libraries for"
-    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    $echo "X----------------------------------------------------------------------" | $Xsed
     exit $EXIT_SUCCESS
     ;;
 
@@ -6456,15 +6404,12 @@ relink_command=\"$relink_command\""
       fi
 
       # Restore saved environment variables
-      for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-      do
-       eval "if test \"\${save_$lt_var+set}\" = set; then
-               $lt_var=\$save_$lt_var; export $lt_var
-             else
-               $lt_unset $lt_var
-             fi"
-      done
-
+      if test "${save_LC_ALL+set}" = set; then
+	LC_ALL="$save_LC_ALL"; export LC_ALL
+      fi
+      if test "${save_LANG+set}" = set; then
+	LANG="$save_LANG"; export LANG
+      fi
 
       # Now prepare to actually exec the command.
       exec_cmd="\$cmd$args"
@@ -6821,9 +6766,9 @@ The following components of LINK-COMMAND are treated specially:
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
   -export-symbols SYMFILE
-                    try to export only the symbols listed in SYMFILE
+		    try to export only the symbols listed in SYMFILE
   -export-symbols-regex REGEX
-                    try to export only the symbols matching REGEX
+		    try to export only the symbols matching REGEX
   -LLIBDIR          search LIBDIR for required installed libraries
   -lNAME            OUTPUT-FILE requires the installed library libNAME
   -module           build a library that can dlopened
@@ -6837,11 +6782,9 @@ The following components of LINK-COMMAND are treated specially:
   -release RELEASE  specify package release information
   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of uninstalled libtool libraries
-  -static-libtool-libs
-                    do not do any dynamic linking of libtool libraries
+  -static           do not do any dynamic linking of libtool libraries
   -version-info CURRENT[:REVISION[:AGE]]
-                    specify library version info [each variable defaults to 0]
+		    specify library version info [each variable defaults to 0]
 
 All other options (arguments beginning with \`-') are ignored.