diff options
Diffstat (limited to 'app/viewres/missing')
| -rw-r--r-- | app/viewres/missing | 234 |
1 files changed, 102 insertions, 132 deletions
diff --git a/app/viewres/missing b/app/viewres/missing index 894e786e1..9a5564823 100644 --- a/app/viewres/missing +++ b/app/viewres/missing @@ -1,10 +1,9 @@ #! /bin/sh # Common stub for a few missing GNU programs while installing. -scriptversion=2005-06-08.21 +scriptversion=2012-01-06.18; # UTC -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. +# Copyright (C) 1996-2012 Free Software Foundation, Inc. # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. # This program is free software; you can redistribute it and/or modify @@ -18,9 +17,7 @@ scriptversion=2005-06-08.21 # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see <http://www.gnu.org/licenses/>. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -28,13 +25,15 @@ scriptversion=2005-06-08.21 # the same distribution terms that you use for the rest of that program. if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "Try '$0 --help' for more information" exit 1 fi run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' -# In the cases where this matters, `missing' is being run in the +# In the cases where this matters, 'missing' is being run in the # srcdir already. if test -f configure.ac; then configure_ac=configure.ac @@ -44,7 +43,7 @@ fi msg="missing on your system" -case "$1" in +case $1 in --run) # Try to run requested program, and just exit if it succeeds. run= @@ -65,7 +64,7 @@ case "$1" in echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an error status if there is no known handling for PROGRAM. Options: @@ -74,17 +73,20 @@ Options: --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c + aclocal touch file 'aclocal.m4' + autoconf touch file 'configure' + autoheader touch file 'config.h.in' + autom4te touch the output file, or create a stub one + automake touch all 'Makefile.in' files + bison create 'y.tab.[ch]', if possible, from existing .[ch] + flex create 'lex.yy.c', if possible, from existing .c help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c + lex create 'lex.yy.c', if possible, from existing .c makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] + yacc create 'y.tab.[ch]', if possible, from existing .[ch] + +Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and +'g' are ignored when checking the name. Send bug reports to <bug-automake@gnu.org>." exit $? @@ -96,37 +98,35 @@ Send bug reports to <bug-automake@gnu.org>." ;; -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" + echo 1>&2 "$0: Unknown '$1' option" + echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + # Now exit if we have it, but it failed. Also exit now if we # don't have it and --version was passed (most likely to detect -# the program). -case "$1" in - lex|yacc) +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) # Not GNU programs, they don't have --version. ;; - tar) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - *) if test -z "$run" && ($1 --version) > /dev/null 2>&1; then # We have it, but it failed. exit 1 elif test "x$2" = "x--version" || test "x$2" = "x--help"; then # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether + # running '$TOOL --version' or '$TOOL --help' to check whether # $TOOL exists and not knowing $TOOL uses missing. exit 1 fi @@ -135,36 +135,36 @@ esac # If it does not exist, or fails to run (possibly an outdated version), # try to emulate it. -case "$1" in +case $program in aclocal*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from +WARNING: '$1' is $msg. You should only need it if + you modified 'acinclude.m4' or '${configure_ac}'. You might want + to install the Automake and Perl packages. Grab them from any GNU archive site." touch aclocal.m4 ;; - autoconf) + autoconf*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU +WARNING: '$1' is $msg. You should only need it if + you modified '${configure_ac}'. You might want to install the + Autoconf and GNU m4 packages. Grab them from any GNU archive site." touch configure ;; - autoheader) + autoheader*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them +WARNING: '$1' is $msg. You should only need it if + you modified 'acconfig.h' or '${configure_ac}'. You might want + to install the Autoconf and GNU m4 packages. Grab them from any GNU archive site." files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` test -z "$files" && files="config.h" touch_files= for f in $files; do - case "$f" in + case $f in *:*) touch_files="$touch_files "`echo "$f" | sed -e 's/^[^:]*://' -e 's/:.*//'`;; *) touch_files="$touch_files $f.in";; @@ -175,25 +175,25 @@ WARNING: \`$1' is $msg. You should only need it if automake*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. +WARNING: '$1' is $msg. You should only need it if + you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'. + You might want to install the Automake and Perl packages. Grab them from any GNU archive site." find . -type f -name Makefile.am -print | sed 's/\.am$/.in/' | while read f; do touch "$f"; done ;; - autom4te) + autom4te*) echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. +WARNING: '$1' is needed, but is $msg. You might have modified some files without having the proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU + You can get '$1' as part of Autoconf from any GNU archive site." - file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'` - test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -f "$file"; then touch $file else @@ -207,93 +207,97 @@ WARNING: \`$1' is needed, but is $msg. fi ;; - bison|yacc) + bison*|yacc*) echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package +WARNING: '$1' $msg. You should only need it if + you modified a '.y' file. You may need the Bison package in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." + Bison from any GNU archive site." rm -f y.tab.c y.tab.h - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in *.y) SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.c fi SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" y.tab.h fi ;; esac fi - if [ ! -f y.tab.h ]; then + if test ! -f y.tab.h; then echo >y.tab.h fi - if [ ! -f y.tab.c ]; then + if test ! -f y.tab.c; then echo 'main() { return 0; }' >y.tab.c fi ;; - lex|flex) + lex*|flex*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package +WARNING: '$1' is $msg. You should only need it if + you modified a '.l' file. You may need the Flex package in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." + Flex from any GNU archive site." rm -f lex.yy.c - if [ $# -ne 1 ]; then - eval LASTARG="\${$#}" - case "$LASTARG" in + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in *.l) SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if [ -f "$SRCFILE" ]; then + if test -f "$SRCFILE"; then cp "$SRCFILE" lex.yy.c fi ;; esac fi - if [ ! -f lex.yy.c ]; then + if test ! -f lex.yy.c; then echo 'main() { return 0; }' >lex.yy.c fi ;; - help2man) + help2man*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if +WARNING: '$1' is $msg. You should only need it if you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." + Help2man package in order for those modifications to take + effect. You can get Help2man from any GNU archive site." - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` - if test -z "$file"; then - file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'` - fi - if [ -f "$file" ]; then + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then touch $file else test -z "$file" || exec >$file echo ".ab help2man is required to generate this page" - exit 1 + exit $? fi ;; - makeinfo) + makeinfo*) echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file +WARNING: '$1' is $msg. You should only need it if + you modified a '.texi' or '.texinfo' file, or any other file indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." + call might also be the consequence of using a buggy 'make' (AIX, + DU, IRIX). You might want to install the Texinfo package or + the GNU make package. Grab either from any GNU archive site." # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'` + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` if test -z "$file"; then # ... or it is the one specified with @setfilename ... infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` # ... or it is derived from the source name (dir/f.texi becomes f.info) test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info fi @@ -303,49 +307,14 @@ WARNING: \`$1' is $msg. You should only need it if touch $file ;; - tar) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case "$firstarg" in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case "$firstarg" in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - *) echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. +WARNING: '$1' is needed, and is $msg. You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, + proper tools for further handling them. Check the 'README' file, it often tells you about the needed prerequisites for installing this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." + some other package would contain this missing '$1' program." exit 1 ;; esac @@ -356,5 +325,6 @@ exit 0 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: |