diff options
Diffstat (limited to 'app/xclock/configure')
| -rw-r--r-- | app/xclock/configure | 330 |
1 files changed, 75 insertions, 255 deletions
diff --git a/app/xclock/configure b/app/xclock/configure index 2d29cbb69..8fba8ad2c 100644 --- a/app/xclock/configure +++ b/app/xclock/configure @@ -3207,9 +3207,6 @@ echo "$as_me:$LINENO: checking for XCLOCK_X11" >&5 echo $ECHO_N "checking for XCLOCK_X11... $ECHO_C" >&6 if test -n "$PKG_CONFIG"; then - if test -n "$XCLOCK_X11_CFLAGS"; then - pkg_cv_XCLOCK_X11_CFLAGS="$XCLOCK_X11_CFLAGS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11\"") >&5 ($PKG_CONFIG --exists --print-errors "x11") 2>&5 @@ -3220,14 +3217,10 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi if test -n "$PKG_CONFIG"; then - if test -n "$XCLOCK_X11_LIBS"; then - pkg_cv_XCLOCK_X11_LIBS="$XCLOCK_X11_LIBS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"x11\"") >&5 ($PKG_CONFIG --exists --print-errors "x11") 2>&5 @@ -3238,59 +3231,38 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi - - if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - XCLOCK_X11_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "x11"` - else - XCLOCK_X11_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "x11"` - fi + XCLOCK_X11_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "x11"` # Put the nasty error message in config.log where it belongs - echo "$XCLOCK_X11_PKG_ERRORS" >&5 - - { { echo "$as_me:$LINENO: error: Package requirements (x11) were not met: - -$XCLOCK_X11_PKG_ERRORS + echo "$XCLOCK_X11_PKG_ERRORS" 1>&5 + { { echo "$as_me:$LINENO: error: Package requirements (x11) were not met. Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. -Alternatively, you may set the environment variables XCLOCK_X11_CFLAGS -and XCLOCK_X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (x11) were not met: - -$XCLOCK_X11_PKG_ERRORS - +Alternatively you may set the XCLOCK_X11_CFLAGS and XCLOCK_X11_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details." >&5 +echo "$as_me: error: Package requirements (x11) were not met. Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. -Alternatively, you may set the environment variables XCLOCK_X11_CFLAGS -and XCLOCK_X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} +Alternatively you may set the XCLOCK_X11_CFLAGS and XCLOCK_X11_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details." >&2;} { (exit 1); exit 1; }; } elif test $pkg_failed = untried; then { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. -Alternatively, you may set the environment variables XCLOCK_X11_CFLAGS -and XCLOCK_X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +Alternatively you may set the XCLOCK_X11_CFLAGS and XCLOCK_X11_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details. To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>. See \`config.log' for more details." >&5 @@ -3298,9 +3270,9 @@ echo "$as_me: error: The pkg-config script could not be found or is too old. Ma is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. -Alternatively, you may set the environment variables XCLOCK_X11_CFLAGS -and XCLOCK_X11_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +Alternatively you may set the XCLOCK_X11_CFLAGS and XCLOCK_X11_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details. To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>. See \`config.log' for more details." >&2;} @@ -3340,9 +3312,6 @@ echo "$as_me:$LINENO: checking for TMP_XAW" >&5 echo $ECHO_N "checking for TMP_XAW... $ECHO_C" >&6 if test -n "$PKG_CONFIG"; then - if test -n "$TMP_XAW_CFLAGS"; then - pkg_cv_TMP_XAW_CFLAGS="$TMP_XAW_CFLAGS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$TMP_CHECK1\"") >&5 ($PKG_CONFIG --exists --print-errors "$TMP_CHECK1") 2>&5 @@ -3353,14 +3322,10 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi if test -n "$PKG_CONFIG"; then - if test -n "$TMP_XAW_LIBS"; then - pkg_cv_TMP_XAW_LIBS="$TMP_XAW_LIBS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$TMP_CHECK1\"") >&5 ($PKG_CONFIG --exists --print-errors "$TMP_CHECK1") 2>&5 @@ -3371,27 +3336,14 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi - - if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - TMP_XAW_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$TMP_CHECK1"` - else - TMP_XAW_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$TMP_CHECK1"` - fi + TMP_XAW_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$TMP_CHECK1"` # Put the nasty error message in config.log where it belongs - echo "$TMP_XAW_PKG_ERRORS" >&5 + echo "$TMP_XAW_PKG_ERRORS" 1>&5 success=no elif test $pkg_failed = untried; then @@ -3411,9 +3363,6 @@ echo "$as_me:$LINENO: checking for TMP_XAW" >&5 echo $ECHO_N "checking for TMP_XAW... $ECHO_C" >&6 if test -n "$PKG_CONFIG"; then - if test -n "$TMP_XAW_CFLAGS"; then - pkg_cv_TMP_XAW_CFLAGS="$TMP_XAW_CFLAGS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$TMP_CHECK2\"") >&5 ($PKG_CONFIG --exists --print-errors "$TMP_CHECK2") 2>&5 @@ -3424,14 +3373,10 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi if test -n "$PKG_CONFIG"; then - if test -n "$TMP_XAW_LIBS"; then - pkg_cv_TMP_XAW_LIBS="$TMP_XAW_LIBS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"\$TMP_CHECK2\"") >&5 ($PKG_CONFIG --exists --print-errors "$TMP_CHECK2") 2>&5 @@ -3442,27 +3387,14 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi - - if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - TMP_XAW_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$TMP_CHECK2"` - else - TMP_XAW_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$TMP_CHECK2"` - fi + TMP_XAW_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$TMP_CHECK2"` # Put the nasty error message in config.log where it belongs - echo "$TMP_XAW_PKG_ERRORS" >&5 + echo "$TMP_XAW_PKG_ERRORS" 1>&5 success=no elif test $pkg_failed = untried; then @@ -3516,9 +3448,6 @@ echo "$as_me:$LINENO: checking for XFT" >&5 echo $ECHO_N "checking for XFT... $ECHO_C" >&6 if test -n "$PKG_CONFIG"; then - if test -n "$XFT_CFLAGS"; then - pkg_cv_XFT_CFLAGS="$XFT_CFLAGS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xrender xft\"") >&5 ($PKG_CONFIG --exists --print-errors "xrender xft") 2>&5 @@ -3529,14 +3458,10 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi if test -n "$PKG_CONFIG"; then - if test -n "$XFT_LIBS"; then - pkg_cv_XFT_LIBS="$XFT_LIBS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xrender xft\"") >&5 ($PKG_CONFIG --exists --print-errors "xrender xft") 2>&5 @@ -3547,59 +3472,38 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi - - if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - XFT_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "xrender xft"` - else - XFT_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "xrender xft"` - fi + XFT_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "xrender xft"` # Put the nasty error message in config.log where it belongs - echo "$XFT_PKG_ERRORS" >&5 - - { { echo "$as_me:$LINENO: error: Package requirements (xrender xft) were not met: - -$XFT_PKG_ERRORS + echo "$XFT_PKG_ERRORS" 1>&5 + { { echo "$as_me:$LINENO: error: Package requirements (xrender xft) were not met. Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. -Alternatively, you may set the environment variables XFT_CFLAGS -and XFT_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (xrender xft) were not met: - -$XFT_PKG_ERRORS - +Alternatively you may set the XFT_CFLAGS and XFT_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details." >&5 +echo "$as_me: error: Package requirements (xrender xft) were not met. Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. -Alternatively, you may set the environment variables XFT_CFLAGS -and XFT_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} +Alternatively you may set the XFT_CFLAGS and XFT_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details." >&2;} { (exit 1); exit 1; }; } elif test $pkg_failed = untried; then { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. -Alternatively, you may set the environment variables XFT_CFLAGS -and XFT_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +Alternatively you may set the XFT_CFLAGS and XFT_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details. To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>. See \`config.log' for more details." >&5 @@ -3607,9 +3511,9 @@ echo "$as_me: error: The pkg-config script could not be found or is too old. Ma is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. -Alternatively, you may set the environment variables XFT_CFLAGS -and XFT_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +Alternatively you may set the XFT_CFLAGS and XFT_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details. To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>. See \`config.log' for more details." >&2;} @@ -3776,9 +3680,6 @@ echo "$as_me:$LINENO: checking for XKB" >&5 echo $ECHO_N "checking for XKB... $ECHO_C" >&6 if test -n "$PKG_CONFIG"; then - if test -n "$XKB_CFLAGS"; then - pkg_cv_XKB_CFLAGS="$XKB_CFLAGS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xkbfile\"") >&5 ($PKG_CONFIG --exists --print-errors "xkbfile") 2>&5 @@ -3789,14 +3690,10 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi if test -n "$PKG_CONFIG"; then - if test -n "$XKB_LIBS"; then - pkg_cv_XKB_LIBS="$XKB_LIBS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xkbfile\"") >&5 ($PKG_CONFIG --exists --print-errors "xkbfile") 2>&5 @@ -3807,59 +3704,38 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi - - if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - XKB_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "xkbfile"` - else - XKB_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "xkbfile"` - fi + XKB_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "xkbfile"` # Put the nasty error message in config.log where it belongs - echo "$XKB_PKG_ERRORS" >&5 - - { { echo "$as_me:$LINENO: error: Package requirements (xkbfile) were not met: - -$XKB_PKG_ERRORS + echo "$XKB_PKG_ERRORS" 1>&5 + { { echo "$as_me:$LINENO: error: Package requirements (xkbfile) were not met. Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. -Alternatively, you may set the environment variables XKB_CFLAGS -and XKB_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (xkbfile) were not met: - -$XKB_PKG_ERRORS - +Alternatively you may set the XKB_CFLAGS and XKB_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details." >&5 +echo "$as_me: error: Package requirements (xkbfile) were not met. Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. -Alternatively, you may set the environment variables XKB_CFLAGS -and XKB_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} +Alternatively you may set the XKB_CFLAGS and XKB_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details." >&2;} { (exit 1); exit 1; }; } elif test $pkg_failed = untried; then { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. -Alternatively, you may set the environment variables XKB_CFLAGS -and XKB_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +Alternatively you may set the XKB_CFLAGS and XKB_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details. To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>. See \`config.log' for more details." >&5 @@ -3867,9 +3743,9 @@ echo "$as_me: error: The pkg-config script could not be found or is too old. Ma is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. -Alternatively, you may set the environment variables XKB_CFLAGS -and XKB_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +Alternatively you may set the XKB_CFLAGS and XKB_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details. To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>. See \`config.log' for more details." >&2;} @@ -3899,9 +3775,6 @@ echo "$as_me:$LINENO: checking for APPDEFS" >&5 echo $ECHO_N "checking for APPDEFS... $ECHO_C" >&6 if test -n "$PKG_CONFIG"; then - if test -n "$APPDEFS_CFLAGS"; then - pkg_cv_APPDEFS_CFLAGS="$APPDEFS_CFLAGS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xt\"") >&5 ($PKG_CONFIG --exists --print-errors "xt") 2>&5 @@ -3912,14 +3785,10 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi if test -n "$PKG_CONFIG"; then - if test -n "$APPDEFS_LIBS"; then - pkg_cv_APPDEFS_LIBS="$APPDEFS_LIBS" - else if test -n "$PKG_CONFIG" && \ { (echo "$as_me:$LINENO: \$PKG_CONFIG --exists --print-errors \"xt\"") >&5 ($PKG_CONFIG --exists --print-errors "xt") 2>&5 @@ -3930,59 +3799,38 @@ if test -n "$PKG_CONFIG"; then else pkg_failed=yes fi - fi else pkg_failed=untried fi - - if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - APPDEFS_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "xt"` - else - APPDEFS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "xt"` - fi + APPDEFS_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "xt"` # Put the nasty error message in config.log where it belongs - echo "$APPDEFS_PKG_ERRORS" >&5 - - { { echo "$as_me:$LINENO: error: Package requirements (xt) were not met: - -$APPDEFS_PKG_ERRORS + echo "$APPDEFS_PKG_ERRORS" 1>&5 + { { echo "$as_me:$LINENO: error: Package requirements (xt) were not met. Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. -Alternatively, you may set the environment variables APPDEFS_CFLAGS -and APPDEFS_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&5 -echo "$as_me: error: Package requirements (xt) were not met: - -$APPDEFS_PKG_ERRORS - +Alternatively you may set the APPDEFS_CFLAGS and APPDEFS_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details." >&5 +echo "$as_me: error: Package requirements (xt) were not met. Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. -Alternatively, you may set the environment variables APPDEFS_CFLAGS -and APPDEFS_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" >&2;} +Alternatively you may set the APPDEFS_CFLAGS and APPDEFS_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details." >&2;} { (exit 1); exit 1; }; } elif test $pkg_failed = untried; then { { echo "$as_me:$LINENO: error: The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. -Alternatively, you may set the environment variables APPDEFS_CFLAGS -and APPDEFS_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +Alternatively you may set the APPDEFS_CFLAGS and APPDEFS_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details. To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>. See \`config.log' for more details." >&5 @@ -3990,9 +3838,9 @@ echo "$as_me: error: The pkg-config script could not be found or is too old. Ma is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. -Alternatively, you may set the environment variables APPDEFS_CFLAGS -and APPDEFS_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. +Alternatively you may set the APPDEFS_CFLAGS and APPDEFS_LIBS environment variables +to avoid the need to call pkg-config. See the pkg-config man page for +more details. To get pkg-config, see <http://www.freedesktop.org/software/pkgconfig>. See \`config.log' for more details." >&2;} @@ -4065,75 +3913,47 @@ host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` if test x$APP_MAN_SUFFIX = x ; then - case $host_os in - linux*) APP_MAN_SUFFIX=1x ;; - *) APP_MAN_SUFFIX=1 ;; - esac + APP_MAN_SUFFIX=1 fi if test x$APP_MAN_DIR = x ; then - case $host_os in - linux*) APP_MAN_DIR='$(mandir)/man1' ;; - *) APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)' ;; - esac + APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)' fi if test x$LIB_MAN_SUFFIX = x ; then - case $host_os in - linux*) LIB_MAN_SUFFIX=3x ;; - *) LIB_MAN_SUFFIX=3 ;; - esac + LIB_MAN_SUFFIX=3 fi if test x$LIB_MAN_DIR = x ; then - case $host_os in - linux*) LIB_MAN_DIR='$(mandir)/man3' ;; - *) LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)' ;; - esac + LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)' fi if test x$FILE_MAN_SUFFIX = x ; then case $host_os in - linux*) FILE_MAN_SUFFIX=5x ;; solaris*) FILE_MAN_SUFFIX=4 ;; *) FILE_MAN_SUFFIX=5 ;; esac fi if test x$FILE_MAN_DIR = x ; then - case $host_os in - linux*) FILE_MAN_DIR='$(mandir)/man5' ;; - *) FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)' ;; - esac + FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)' fi -# In Imake's linux.cf, the misc man suffix & dir was only changed for -# LinuxDebian, not other Linuxes, so we leave it unchanged here if test x$MISC_MAN_SUFFIX = x ; then case $host_os in -# linux*) MISC_MAN_SUFFIX=7x ;; solaris*) MISC_MAN_SUFFIX=5 ;; *) MISC_MAN_SUFFIX=7 ;; esac fi if test x$MISC_MAN_DIR = x ; then - case $host_os in -# linux*) MISC_MAN_DIR='$(mandir)/man7' ;; - *) MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)' ;; - esac + MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)' fi -# In Imake's linux.cf, the driver man suffix & dir was only changed for -# LinuxDebian, not other Linuxes, so we leave it unchanged here if test x$DRIVER_MAN_SUFFIX = x ; then case $host_os in -# linux*) DRIVER_MAN_SUFFIX=4x ;; solaris*) DRIVER_MAN_SUFFIX=7 ;; *) DRIVER_MAN_SUFFIX=4 ;; esac fi if test x$DRIVER_MAN_DIR = x ; then - case $host_os in -# linux*) DRIVER_MAN_DIR='$(mandir)/man4' ;; - *) DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)' ;; - esac + DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)' fi if test x$ADMIN_MAN_SUFFIX = x ; then |