diff options
Diffstat (limited to 'app/xstdcmap/depcomp')
| -rw-r--r-- | app/xstdcmap/depcomp | 409 |
1 files changed, 333 insertions, 76 deletions
diff --git a/app/xstdcmap/depcomp b/app/xstdcmap/depcomp index 04701da53..e1f51f482 100644 --- a/app/xstdcmap/depcomp +++ b/app/xstdcmap/depcomp @@ -1,9 +1,9 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2005-07-09.11 +scriptversion=2012-07-12.20; # UTC -# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. +# Copyright (C) 1999-2012 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -16,9 +16,7 @@ scriptversion=2005-07-09.11 # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. +# along with this program. If not, see <http://www.gnu.org/licenses/>. # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -29,7 +27,7 @@ scriptversion=2005-07-09.11 case $1 in '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + echo "$0: No command. Try '$0 --help' for more information." 1>&2 exit 1; ;; -h | --h*) @@ -41,11 +39,11 @@ as side-effects. Environment variables: depmode Dependency tracking mode. - source Source file read by `PROGRAMS ARGS'. - object Object file output by `PROGRAMS ARGS'. + source Source file read by 'PROGRAMS ARGS'. + object Object file output by 'PROGRAMS ARGS'. DEPDIR directory where to store dependencies. depfile Dependency file to output. - tmpdepfile Temporary file to use when outputing dependencies. + tmpdepfile Temporary file to use when outputting dependencies. libtool Whether libtool is used (yes/no). Report bugs to <bug-automake@gnu.org>. @@ -58,6 +56,12 @@ EOF ;; esac +# A tabulation character. +tab=' ' +# A newline character. +nl=' +' + if test -z "$depmode" || test -z "$source" || test -z "$object"; then echo "depcomp: Variables source, object and depmode must be set" 1>&2 exit 1 @@ -70,6 +74,9 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} rm -f "$tmpdepfile" +# Avoid interferences from the environment. +gccflag= dashmflag= + # Some modes work just like other modes, but use different flags. We # parameterize here, but still list the modes in the big case below, # to make depend.m4 easier to write. Note that we *cannot* use a case @@ -86,12 +93,48 @@ if test "$depmode" = dashXmstdout; then depmode=dashmstdout fi +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp +fi + +if test "$depmode" = msvc7msys; then + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 +fi + +if test "$depmode" = xlc; then + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information. + gccflag=-qmakedep=gcc,-MF + depmode=gcc +fi + case "$depmode" in gcc3) ## gcc 3 implements dependency tracking that does exactly what ## we want. Yay! Note: for some reason libtool 1.4 doesn't like ## it if -MD -MP comes after the -MF stuff. Hmm. - "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" stat=$? if test $stat -eq 0; then : else @@ -102,13 +145,17 @@ gcc3) ;; gcc) +## Note that this doesn't just cater to obsosete pre-3.x GCC compilers. +## but also to in-use compilers like IMB xlc/xlC and the HP C compiler. +## (see the conditional assignment to $gccflag above). ## There are various ways to get dependency output from gcc. Here's ## why we pick this rather obscure method: ## - Don't want to use -MD because we'd like the dependencies to end ## up in a subdir. Having to rename by hand is ugly. ## (We might end up doing this anyway to support other compilers.) ## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). +## -MM, not -M (despite what the docs say). Also, it might not be +## supported by the other compilers which use the 'gcc' depmode. ## - Using -M directly means running the compiler twice (even worse ## than renaming). if test -z "$gccflag"; then @@ -127,20 +174,21 @@ gcc) ## The second -e expression handles DOS-style file names with drive letters. sed -e 's/^[^:]*: / /' \ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. +## This next piece of magic avoids the "deleted header file" problem. ## The problem is that when a header file which appears in a .P file ## is deleted, the dependency causes make to die (because there is ## typically no way to rebuild the header). We avoid this by adding ## dummy dependencies for each header file. Too bad gcc doesn't do ## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory + tr ' ' "$nl" < "$tmpdepfile" | +## Some versions of gcc put a space before the ':'. On the theory ## that the space means something, we add a space to the output as -## well. +## well. hp depmode also adds that space, but also prefixes the VPATH +## to the object. Take care to not repeat it in the output. ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" rm -f "$tmpdepfile" ;; @@ -172,20 +220,17 @@ sgi) # clever and replace this with sed code, as IRIX sed won't handle # lines with more than a fixed number of characters (4096 in # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the + # the IRIX cc adds comments like '#:fec' to the end of the # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ + tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> $depfile - echo >> $depfile + tr "$nl" ' ' >> "$depfile" + echo >> "$depfile" # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ + tr ' ' "$nl" < "$tmpdepfile" \ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> $depfile + >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile @@ -195,40 +240,51 @@ sgi) rm -f "$tmpdepfile" ;; +xlc) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + aix) # The C for AIX Compiler uses -M and outputs the dependencies # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the + # current directory. Also, the AIX compiler puts '$object:' at the # start of each line; $object doesn't have directory information. # Version 6 uses the directory in both cases. - stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` - tmpdepfile="$stripped.u" + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u "$@" -Wc,-M else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u "$@" -M fi stat=$? - if test -f "$tmpdepfile"; then : - else - stripped=`echo "$stripped" | sed 's,^.*/,,'` - tmpdepfile="$stripped.u" - fi - if test $stat -eq 0; then : else - rm -f "$tmpdepfile" + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" exit $stat fi + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done if test -f "$tmpdepfile"; then - outname="$stripped.o" - # Each line is of the form `foo.o: dependent.h'. + # Each line is of the form 'foo.o: dependent.h'. # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" - sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + # '$object: dependent.h' and one to simply 'dependent.h:'. + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else # The sourcefile does not contain any dependencies, so just # store a dummy comment line, to avoid errors with the Makefile @@ -239,23 +295,26 @@ aix) ;; icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'. + # However on + # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c # ICC 7.0 will fill foo.d with something like # foo.o: sub/foo.c # foo.o: sub/foo.h - # which is wrong. We want: + # which is wrong. We want # sub/foo.o: sub/foo.c # sub/foo.o: sub/foo.h # sub/foo.c: # sub/foo.h: # ICC 7.1 will output # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : + # and will wrap long lines using '\': # foo.o: sub/foo.c ... \ # sub/foo.h ... \ # ... - + # tcc 0.9.26 (FIXME still under development at the moment of writing) + # will emit a similar output, but also prepend the continuation lines + # with horizontal tabulation characters. "$@" -MD -MF "$tmpdepfile" stat=$? if test $stat -eq 0; then : @@ -264,6 +323,85 @@ icc) exit $stat fi rm -f "$depfile" + # Each line is of the form 'foo.o: dependent.h', + # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'. + # Do two passes, one to just change these to + # '$object: dependent.h' and one to simply 'dependent.h:'. + sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \ + < "$tmpdepfile" > "$depfile" + sed ' + s/[ '"$tab"'][ '"$tab"']*/ /g + s/^ *// + s/ *\\*$// + s/^[^:]*: *// + /^$/d + /:$/d + s/$/ :/ + ' < "$tmpdepfile" >> "$depfile" + rm -f "$tmpdepfile" + ;; + +## The order of this option in the case statement is important, since the +## shell code in configure will try each of these formats in the order +## listed in this file. A plain '-MD' option would be understood by many +## compilers, so we must ensure this comes after the gcc and icc options. +pgcc) + # Portland's C compiler understands '-MD'. + # Will always output deps to 'file.d' where file is the root name of the + # source file under compilation, even if file resides in a subdirectory. + # The object file name does not affect the name of the '.d' file. + # pgcc 10.2 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using '\' : + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + # Use the source, not the object, to determine the base name, since + # that's sadly what pgcc will do too. + base=`echo "$source" | sed -e 's|^.*/||' -e 's/\.[-_a-zA-Z0-9]*$//'` + tmpdepfile="$base.d" + + # For projects that build the same source file twice into different object + # files, the pgcc approach of using the *source* file root name can cause + # problems in parallel builds. Use a locking strategy to avoid stomping on + # the same $tmpdepfile. + lockdir="$base.d-lock" + trap "echo '$0: caught signal, cleaning up...' >&2; rm -rf $lockdir" 1 2 13 15 + numtries=100 + i=$numtries + while test $i -gt 0 ; do + # mkdir is a portable test-and-set. + if mkdir $lockdir 2>/dev/null; then + # This process acquired the lock. + "$@" -MD + stat=$? + # Release the lock. + rm -rf $lockdir + break + else + ## the lock is being held by a different process, + ## wait until the winning process is done or we timeout + while test -d $lockdir && test $i -gt 0; do + sleep 1 + i=`expr $i - 1` + done + fi + i=`expr $i - 1` + done + trap - 1 2 13 15 + if test $i -le 0; then + echo "$0: failed to acquire lock after $numtries attempts" >&2 + echo "$0: check lockdir '$lockdir'" >&2 + exit 1 + fi + + if test $stat -ne 0; then + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" # Each line is of the form `foo.o: dependent.h', # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. # Do two passes, one to just change these to @@ -276,11 +414,56 @@ icc) rm -f "$tmpdepfile" ;; +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add 'dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + tru64) # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. + # dependencies in 'foo.d' instead, so we check for that too. # Subdirectories are respected. dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` test "x$dir" = "x$object" && dir= @@ -288,13 +471,13 @@ tru64) if test "$libtool" = yes; then # With Tru64 cc, shared objects can also be used to make a - # static library. This mecanism is used in libtool 1.4 series to + # static library. This mechanism is used in libtool 1.4 series to # handle both shared and static libraries in a single compilation. # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. # # With libtool 1.5 this exception was removed, and libtool now # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in in $dir.libs/$base.o.d and + # compilations output dependencies in $dir.libs/$base.o.d and # in $dir$base.o.d. We have to check for both files, because # one of the two compilations can be disabled. We should prefer # $dir$base.o.d over $dir.libs/$base.o.d because the latter is @@ -326,14 +509,59 @@ tru64) done if test -f "$tmpdepfile"; then sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" else echo "#dummy" > "$depfile" fi rm -f "$tmpdepfile" ;; +msvc7) + if test "$libtool" = yes; then + showIncludes=-Wc,-showIncludes + else + showIncludes=-showIncludes + fi + "$@" $showIncludes > "$tmpdepfile" + stat=$? + grep -v '^Note: including file: ' "$tmpdepfile" + if test "$stat" = 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The first sed program below extracts the file names and escapes + # backslashes for cygpath. The second sed program outputs the file + # name when reading, but also accumulates all include files in the + # hold buffer in order to output them again at the end. This only + # works with sed implementations that can handle large buffers. + sed < "$tmpdepfile" -n ' +/^Note: including file: *\(.*\)/ { + s//\1/ + s/\\/\\\\/g + p +}' | $cygpath_u | sort -u | sed -n ' +s/ /\\ /g +s/\(.*\)/'"$tab"'\1 \\/p +s/.\(.*\) \\/\1:/ +H +$ { + s/.*/'"$tab"'/ + G + p +}' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvc7msys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + #nosideeffect) # This comment above is used by automake to tell side-effect # dependency tracking mechanisms from slower ones. @@ -345,13 +573,13 @@ dashmstdout) # Remove the call to Libtool. if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift fi - # Remove `-o $object'. + # Remove '-o $object'. IFS=" " for arg do @@ -371,15 +599,14 @@ dashmstdout) done test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' + # Require at least two characters before searching for ':' # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ + tr ' ' "$nl" < "$tmpdepfile" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" @@ -396,38 +623,46 @@ makedepend) "$@" || exit $? # Remove any Libtool call if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift fi # X makedepend shift - cleared=no - for arg in "$@"; do + cleared=no eat=no + for arg + do case $cleared in no) set ""; shift cleared=yes ;; esac + if test $eat = yes; then + eat=no + continue + fi case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; # Strip any option that makedepend may not understand. Remove # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; esac done - obj_suffix="`echo $object | sed 's/^.*\././'`" + obj_suffix=`echo "$object" | sed 's/^.*\././'` touch "$tmpdepfile" ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ + # makedepend may prepend the VPATH from the source file name to the object. + # No need to regex-escape $object, excess matching of '.' is harmless. + sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \ ## Some versions of the HPUX 10.20 sed can't process this invocation ## correctly. Breaking it into two sed invocations is a workaround. sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" @@ -441,13 +676,13 @@ cpp) # Remove the call to Libtool. if test "$libtool" = yes; then - while test $1 != '--mode=compile'; do + while test "X$1" != 'X--mode=compile'; do shift done shift fi - # Remove `-o $object'. + # Remove '-o $object'. IFS=" " for arg do @@ -479,13 +714,27 @@ cpp) msvisualcpp) # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o, - # because we must use -o when running libtool. + # always write the preprocessed file to stdout. "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + IFS=" " for arg do case "$arg" in + -o) + shift + ;; + $object) + shift + ;; "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") set fnord "$@" shift @@ -498,16 +747,23 @@ msvisualcpp) ;; esac done - "$@" -E | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" rm -f "$depfile" echo "$object : \\" > "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" - . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" + echo "$tab" >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" rm -f "$tmpdepfile" ;; +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + none) exec "$@" ;; @@ -526,5 +782,6 @@ exit 0 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" # End: |