From 98d739d83b1adf083234025a96452cac9d00c500 Mon Sep 17 00:00:00 2001 From: Antoine Jacoutot Date: Fri, 17 Sep 2010 08:09:14 +0000 Subject: There is no default /etc/X11/xorg.conf on macppc anymore. input from and ok oga@ matthieu@ --- distrib/notes/README.macppc | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'distrib/notes') diff --git a/distrib/notes/README.macppc b/distrib/notes/README.macppc index 4425f0002..a0dd2aa82 100644 --- a/distrib/notes/README.macppc +++ b/distrib/notes/README.macppc @@ -24,11 +24,10 @@ order to be able to use the X.Org accelerated drivers. Unaccelerated, framebuffer driver --------------------------------- -The wsfb driver uses whatever graphics mode the console is set to -(by Mac OS) as a dumb unaccelerated framebuffer in 8 bits per pixel. -A default /etc/X11/xorg.conf is installed that uses this driver. -So you can just use 'startx' or xdm to start X without further -configuration. +The wsfb driver uses whatever graphics mode the console is set to +(by Mac OS) as a dumb unaccelerated framebuffer in 8 bits per pixel. +You should be able to use 'startx' or xdm to start X without further +configuration. To use xdm from rc.conf, it is necessary to disable /dev/ttyC0 in /etc/ttys, change the 'status' of /dev/ttyC0 to 'off'. @@ -83,4 +82,4 @@ button 2 and mouse button 3 respectively. problem_blurb -$OpenBSD: README.macppc,v 1.7 2010/09/04 10:41:57 matthieu Exp $ +$OpenBSD: README.macppc,v 1.8 2010/09/17 08:09:13 ajacoutot Exp $ -- cgit v1.2.3