Notes on building Xenocara for OpenBSD X hackers This document presents some techniques that can be useful for people wanting to hack the xenocara tree. It assumes some basic knowledge of the OpenBSD build system, as described in the release(8) manual page. o About Xenocara -------------- Xenocara is the name chosen for OpenBSD's version of X. It's currently based on X.Org 7.7 and its dependencies. The goal of Xenocara is to provide a framework to host local modifications and to automate the build of the modular X.Org components, including 3rd party packages and some software maintained by OpenBSD developers. o Source tree ----------- The organisation of the xenocara directory follows the general organisation used in X.Org: - app: X applications and utilities - data: various data files (keyboard mappings and bitmaps) - doc: documentation - driver: input and video drivers - font: fonts - lib: libraries - proto: X protocol headers - util: utilities that don't fit anywhere else - xserver: the source for the X servers In addition Xenocara uses the following directories: - dist: contains some of the 3rd party sources, when keeping them separate helps the build system (fontconfig, xcb and xkeyboard-config) - distrib: all binary distribution related tools and data - etc: some default config files - share: make(1) configuration for Xenocara At the top-level directory two files describe the individual components of Xenocara: - MODULES lists all X.Org components (imported from the X.Org distribution at http://xorg.freedesktop.org/archive/) - 3RDPARTY lists all 3rd party software components provided in Xenocara, either as dependencies of the X.Org software, or as complements to it to provide a more useable default environment. o Compiling and installing ------------------------ Xenocara is made up of almost three hundred different independent packages that need to be built and installed in the right order, especially while bootstrapping (while /usr/X11R6 is still empty). The Xenocara Makefiles take care of that using the 'build' target. Quick startup guide The following steps will build and install everything for the first time. cd /usr/xenocara doas make bootstrap doas make obj doas make build If you want to use another obj directory see below. Requirements A freshly checked out xenocara tree is buildable without any external tool. Only the xenocara and the src (currently only the src/sys/dev/pci/pcidevs file) trees are needed. However if you start modifying things in the automake build system used by many packages, you will need to have the following GNU autotools packages installed: - automake 1.12 (devel/automake/1.12) - autoconf 2.69 (devel/autoconf/2.69) - metaauto 0.9 (or later) (devel/metaauto) - libtool 2.4.2 (or later) (devel/libtool) If you have your source tree on an NFS partition, make sure the clock of your server and client are properly synchronised. Any significant drift will cause various problems during builds. Path To build Xenocara, you need to have /usr/X11R6/bin in your PATH. If you have installed the full Xenocara X sets on your system, you don't need to build all of Xenocara to patch one element. You can go to any module sub-directory and run 'make build' from there. Source directory The variable XSRCDIR can be set either in the environment or in /etc/mk.conf to point to the xenocara source tree, in case you keep it in a non-standard directory (the default is /usr/xenocara). Objdirs Xenocara requires objdirs. Just run 'make obj' as root at any level before 'make build' to make sure that the object directories are created. XOBJDIR defines the obj directory that is used (defaults to /usr/xobj). It should be created before running 'make obj'. o Regenerating configure scripts ------------------------------ Whenever you touched an import file for GNU autotools (Makefile.am, configure.ac mostly), you need to rebuild the configure script and makefiles skeletons. For that use the following command in the directory where you edited the autotools source files: make -f Makefile.bsd-wrapper autoreconf doas make -f Makefile.bsd-wrapper build o Cleaning in packages managed by autotools ----------------------------------------- One common problem when building xenocara is the case where the obj directory didn't exist (or the symbolic link pointed to a non-existent directory) when the source was first built. After fixing this problem, 'configure' will refuse to work in the obj dir, because the source is already configured. To recover from this in one package: rm -f obj make -f Makefile.bsd-wrapper cleandir mkdir XOBJDIR make -f Makefile.bsd-wrapper obj doas make -f Makefile.bsd-wrapper build or from the root of the xenocara tree: find . -type l -name obj | xargs rm -f make cleandir mkdir XOBJDIR make obj doas make build for more desperate cases, remove all files from XSRCDIR not in CVS: cd XSRCDIR cvs -q update -PAd -I - | awk '$1=="?" {print $2}' | xargs rm -f o How to build something with debug information? ---------------------------------------------- You can use "env CFLAGS=-g make -f Makefile.bsd-wrapper build" to build any module with debugging information, but you'll need to remove XOBJDIR/xorg-config.cache.${MACHINE} before doing that because autoconf caches the value of CFLAGS in its cache. o How to get a core file out of the X server? ------------------------------------------- Several things are needed: 1) set kern.nosuidcoredump=2 in /etc/sysctl.conf 2) put Option "NoTrapSignals" "true" in the "ServerFlags" section of /etc/X11/xorg.conf. If such a section doesn't exist, it can be added as follow: Section "ServerFlags" Option "NoTrapSignals" "true" EndSection anywhere in the configuration file. 3) start the X server as root, with the -keepPriv option. A regular user is not allowed to use this option. If you use xenodm, you can add the option in /etc/X11/xenodm/Xservers. If you want to use startx, you need to run it as root, like this: startx -- /usr/X11R6/bin/X -keepPriv Now the X server will dump core when catching a fatal signal. But it will also not be able to restore the text mode on exit. So be prepared to log in remotely (serial terminal or ssh) to reboot your machine or to restart X. The core dump will be in /var/crash. See also -- $OpenBSD: README,v 1.41 2018/05/20 17:25:01 matthieu Exp $