/********************************************************************** Copyright 1998, 1999 by Precision Insight, Inc., Cedar Park, Texas. All Rights Reserved Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Precision Insight not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Precision Insight and its suppliers make no representations about the suitability of this software for any purpose. It is provided "as is" without express or implied warranty. PRECISION INSIGHT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. **********************************************************************/ /* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/neomagic/neo_2097.c,v 1.11 2002/10/30 12:52:21 alanh Exp $ */ /* * The original Precision Insight driver for * XFree86 v.3.3 has been sponsored by Red Hat. * * Authors: * Jens Owen (jens@tungstengraphics.com) * Kevin E. Martin (kevin@precisioninsight.com) * * Port to Xfree86 v.4.0 * 1998, 1999 by Egbert Eich (Egbert.Eich@Physik.TU-Darmstadt.DE) */ /* * This module supports acceleration for 2097 and 2160. */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "xf86.h" #include "xf86_OSproc.h" #include "compiler.h" /* Drivers that use XAA need this */ #include "xf86fbman.h" #include "miline.h" #include "neo.h" #include "neo_reg.h" #include "neo_macros.h" static void Neo2097Sync(ScrnInfoPtr pScrn); static void Neo2097SetupForScreenToScreenCopy(ScrnInfoPtr pScrn, int xdir, int ydir, int rop, unsigned int planemask, int trans_color); static void Neo2097SubsequentScreenToScreenCopy(ScrnInfoPtr pScrn, int srcX, int srcY, int dstX, int dstY, int w, int h); static void Neo2097SetupForSolidFillRect(ScrnInfoPtr pScrn, int color, int rop, unsigned int planemask); static void Neo2097SubsequentSolidFillRect(ScrnInfoPtr pScrn, int x, int y, int w, int h); static void Neo2097SetupScanlineForCPUToScreenColorExpandFill( ScrnInfoPtr pScrn, int fg, int bg, int rop, unsigned int planemask); static void Neo2097SubsequentScanlineCPUToScreenColorExpandFill( ScrnInfoPtr pScrn, int x, int y, int w, int h, int skipleft); static void Neo2097SubsequentColorExpandScanline(ScrnInfoPtr pScrn, int bufno); #if 0 static void Neo2097SetupForMono8x8PatternFill(ScrnInfoPtr pScrn, int patternx, int patterny, int fg, int bg, int rop, unsigned int planemask); static void Neo2097SubsequentMono8x8PatternFill(ScrnInfoPtr pScrn, int patternx, int patterny, int x, int y, int w, int h); #endif static void Neo2097SetupForScanlineImageWrite(ScrnInfoPtr pScrn, int rop, unsigned int planemask, int transparency_color, int bpp, int depth); static void Neo2097SubsequentScanlineImageWriteRect(ScrnInfoPtr pScrn, int x, int y, int w, int h, int skipleft); static void Neo2097SubsequentImageWriteScanline(ScrnInfoPtr pScrn, int num); static unsigned int neo2097Rop[16] = { 0x000000, /* 0x0000 - GXclear */ 0x080000, /* 0x1000 - GXand */ 0x040000, /* 0x0100 - GXandReverse */ 0x0c0000, /* 0x1100 - GXcopy */ 0x020000, /* 0x0010 - GXandInvert */ 0x0a0000, /* 0x1010 - GXnoop */ 0x060000, /* 0x0110 - GXxor */ 0x0e0000, /* 0x1110 - GXor */ 0x010000, /* 0x0001 - GXnor */ 0x090000, /* 0x1001 - GXequiv */ 0x050000, /* 0x0101 - GXinvert */ 0x0d0000, /* 0x1101 - GXorReverse */ 0x030000, /* 0x0011 - GXcopyInvert */ 0x0b0000, /* 0x1011 - GXorInverted */ 0x070000, /* 0x0111 - GXnand */ 0x0f0000 /* 0x1111 - GXset */ }; Bool Neo2097AccelInit(ScreenPtr pScreen) { XAAInfoRecPtr infoPtr; ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; NEOPtr nPtr = NEOPTR(pScrn); NEOACLPtr nAcl = NEOACLPTR(pScrn); nPtr->AccelInfoRec = infoPtr = XAACreateInfoRec(); if(!infoPtr) return FALSE; /* * Set up the main acceleration flags. */ infoPtr->Flags = LINEAR_FRAMEBUFFER | OFFSCREEN_PIXMAPS; if(nAcl->cacheEnd > nAcl->cacheStart) infoPtr->Flags |= PIXMAP_CACHE; infoPtr->PixmapCacheFlags = DO_NOT_BLIT_STIPPLES; /* sync */ infoPtr->Sync = Neo2097Sync; /* screen to screen copy */ infoPtr->ScreenToScreenCopyFlags = (NO_TRANSPARENCY | NO_PLANEMASK); infoPtr->SetupForScreenToScreenCopy = Neo2097SetupForScreenToScreenCopy; infoPtr->SubsequentScreenToScreenCopy = Neo2097SubsequentScreenToScreenCopy; /* solid filled rectangles */ infoPtr->SolidFillFlags = NO_PLANEMASK; infoPtr->SetupForSolidFill = Neo2097SetupForSolidFillRect; infoPtr->SubsequentSolidFillRect = Neo2097SubsequentSolidFillRect; if (!nPtr->strangeLockups) { /* cpu to screen color expansion */ /* * We do CPUToScreenColorExpand (ab)using the Scanline functions: * the neo chipsets need byte padding however we can only do dword * padding. Fortunately the graphics engine doesn't choke if we * transfer up to 3 bytes more than it wants. */ infoPtr->ScanlineColorExpandBuffers = (unsigned char **)xnfalloc(sizeof(char*)); infoPtr->ScanlineColorExpandBuffers[0] = (unsigned char *)(nPtr->NeoMMIOBase + 0x100000); infoPtr->NumScanlineColorExpandBuffers = 1; infoPtr->ScanlineCPUToScreenColorExpandFillFlags = ( NO_PLANEMASK | #ifdef NEO_DO_CLIPPING LEFT_EDGE_CLIPPING | #endif CPU_TRANSFER_PAD_DWORD | BIT_ORDER_IN_BYTE_MSBFIRST ); infoPtr->SetupForScanlineCPUToScreenColorExpandFill = Neo2097SetupScanlineForCPUToScreenColorExpandFill; infoPtr->SubsequentScanlineCPUToScreenColorExpandFill = Neo2097SubsequentScanlineCPUToScreenColorExpandFill; infoPtr->SubsequentColorExpandScanline = Neo2097SubsequentColorExpandScanline; } #if 0 /* 8x8 pattern fills */ infoPtr->Mono8x8PatternFillFlags = NO_PLANEMASK | HARDWARE_PATTERN_PROGRAMMED_ORIGIN | BIT_ORDER_IN_BYTE_MSBFIRST; infoPtr->SetupForMono8x8PatternFill = Neo2097SetupForMono8x8PatternFill; infoPtr->SubsequentMono8x8PatternFillRect = Neo2097SubsequentMono8x8PatternFill; #endif if (!nPtr->strangeLockups) { /* image writes */ infoPtr->ScanlineImageWriteFlags = ( CPU_TRANSFER_PAD_DWORD | SCANLINE_PAD_DWORD | NO_TRANSPARENCY | NO_PLANEMASK ); infoPtr->SetupForScanlineImageWrite = Neo2097SetupForScanlineImageWrite; infoPtr->SubsequentScanlineImageWriteRect = Neo2097SubsequentScanlineImageWriteRect; infoPtr->SubsequentImageWriteScanline = Neo2097SubsequentImageWriteScanline; infoPtr->NumScanlineImageWriteBuffers = 1; infoPtr->ScanlineImageWriteBuffers = infoPtr->ScanlineColorExpandBuffers; } /* * Setup some global variables */ nAcl->ColorShiftAmt = 0; /* Initialize for 8bpp or 15/16bpp support accellerated */ switch (pScrn->bitsPerPixel) { case 8: nAcl->BltCntlFlags = NEO_BC1_DEPTH8; nAcl->ColorShiftAmt = 8; break; case 15: case 16: nAcl->BltCntlFlags = NEO_BC1_DEPTH16; nAcl->ColorShiftAmt = 0; break; case 24: default: return FALSE; } /* Initialize for widths */ switch (pScrn->displayWidth) { case 640: nAcl->BltCntlFlags |= NEO_BC1_X_640; break; case 800: nAcl->BltCntlFlags |= NEO_BC1_X_800; break; case 1024: nAcl->BltCntlFlags |= NEO_BC1_X_1024; break; default: return FALSE; } return (xaaSetupWrapper(pScreen, infoPtr, pScrn->depth, &nPtr->accelSync)); } static void Neo2097Sync(ScrnInfoPtr pScrn) { NEOPtr nPtr = NEOPTR(pScrn); WAIT_ENGINE_IDLE(); } static void Neo2097SetupForScreenToScreenCopy(ScrnInfoPtr pScrn, int xdir, int ydir, int rop, unsigned int planemask, int trans_color) { NEOACLPtr nAcl = NEOACLPTR(pScrn); nAcl->tmpBltCntlFlags = (nAcl->BltCntlFlags | NEO_BC3_SKIP_MAPPING | NEO_BC3_DST_XY_ADDR | NEO_BC3_SRC_XY_ADDR | neo2097Rop[rop]); } static void Neo2097SubsequentScreenToScreenCopy(ScrnInfoPtr pScrn, int srcX, int srcY, int dstX, int dstY, int w, int h) { NEOPtr nPtr = NEOPTR(pScrn); NEOACLPtr nAcl = NEOACLPTR(pScrn); if ((dstY < srcY) || ((dstY == srcY) && (dstX < srcX))) { /* start with upper left corner */ WAIT_ENGINE_IDLE(); OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags); OUTREG(NEOREG_SRCSTARTOFF, (srcY<<16) | (srcX & 0xffff)); OUTREG(NEOREG_DSTSTARTOFF, (dstY<<16) | (dstX & 0xffff)); OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff)); } else { /* start with lower right corner */ WAIT_ENGINE_IDLE(); OUTREG(NEOREG_BLTCNTL, (nAcl->tmpBltCntlFlags | NEO_BC0_X_DEC | NEO_BC0_DST_Y_DEC | NEO_BC0_SRC_Y_DEC)); OUTREG(NEOREG_SRCSTARTOFF, ((srcY+h-1)<<16) | ((srcX+w-1) & 0xffff)); OUTREG(NEOREG_DSTSTARTOFF, ((dstY+h-1)<<16) | ((dstX+w-1) & 0xffff)); OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff)); } } static void Neo2097SetupForSolidFillRect(ScrnInfoPtr pScrn, int color, int rop, unsigned int planemask) { NEOPtr nPtr = NEOPTR(pScrn); NEOACLPtr nAcl = NEOACLPTR(pScrn); WAIT_ENGINE_IDLE(); /* set blt control */ OUTREG(NEOREG_BLTCNTL, nAcl->BltCntlFlags | NEO_BC0_SRC_IS_FG | NEO_BC3_SKIP_MAPPING | NEO_BC3_DST_XY_ADDR | NEO_BC3_SRC_XY_ADDR | neo2097Rop[rop]); /* set foreground color */ OUTREG(NEOREG_FGCOLOR, color |= (color << nAcl->ColorShiftAmt)); } static void Neo2097SubsequentSolidFillRect(ScrnInfoPtr pScrn, int x, int y, int w, int h) { NEOPtr nPtr = NEOPTR(pScrn); WAIT_ENGINE_IDLE(); OUTREG(NEOREG_DSTSTARTOFF, (y<<16) | (x & 0xffff)); OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff)); } static void Neo2097SetupScanlineForCPUToScreenColorExpandFill(ScrnInfoPtr pScrn, int fg, int bg, int rop, unsigned int planemask) { NEOPtr nPtr = NEOPTR(pScrn); NEOACLPtr nAcl = NEOACLPTR(pScrn); if (bg == -1) { /* transparent setup */ WAIT_ENGINE_IDLE(); #ifdef NEO_DO_CLIPPING OUTREG(NEOREG_BLTCNTL, nAcl->BltCntlFlags | NEO_BC0_SYS_TO_VID | NEO_BC0_SRC_MONO | NEO_BC0_SRC_TRANS | NEO_BC3_SKIP_MAPPING | NEO_BC3_CLIP_ON | NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]); #else OUTREG(NEOREG_BLTCNTL, nAcl->BltCntlFlags | NEO_BC0_SYS_TO_VID | NEO_BC0_SRC_MONO | NEO_BC0_SRC_TRANS | NEO_BC3_SKIP_MAPPING | NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]); #endif OUTREG(NEOREG_FGCOLOR, fg |= (fg << nAcl->ColorShiftAmt)); } else { /* opaque setup */ WAIT_ENGINE_IDLE(); #ifdef NEO_DO_CLIPPING OUTREG(NEOREG_BLTCNTL, nAcl->BltCntlFlags | NEO_BC0_SYS_TO_VID | NEO_BC0_SRC_MONO | NEO_BC3_SKIP_MAPPING | NEO_BC3_CLIP_ON | NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]); #else OUTREG(NEOREG_BLTCNTL, nAcl->BltCntlFlags | NEO_BC0_SYS_TO_VID | NEO_BC0_SRC_MONO | NEO_BC3_SKIP_MAPPING | NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]); #endif OUTREG(NEOREG_FGCOLOR, fg |= (fg << nAcl->ColorShiftAmt)); OUTREG(NEOREG_BGCOLOR, bg |= (bg << nAcl->ColorShiftAmt)); } } static void Neo2097SubsequentScanlineCPUToScreenColorExpandFill(ScrnInfoPtr pScrn, int x, int y, int w, int h, int skipleft) { NEOPtr nPtr = NEOPTR(pScrn); NEOACLPtr nAcl = NEOACLPTR(pScrn); #ifdef NEO_DO_CLIPPING w = (w + 31) & ~31; #else nAcl->CPUToScreenColorExpandFill_x = x; nAcl->CPUToScreenColorExpandFill_y = y; nAcl->CPUToScreenColorExpandFill_w = w; nAcl->CPUToScreenColorExpandFill_h = h; #endif WAIT_ENGINE_IDLE(); #ifdef NEO_DO_CLIPPING OUTREG(NEOREG_CLIPLT, (y << 16) | (x + skipleft)); OUTREG(NEOREG_CLIPRB, ((y + h) << 16) | (x + w)); WAIT_ENGINE_IDLE(); #endif OUTREG(NEOREG_SRCSTARTOFF, 0); OUTREG(NEOREG_DSTSTARTOFF, (y<<16) | (x & 0xffff)); #ifdef NEO_DO_CLIPPING OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff)); #else OUTREG(NEOREG_XYEXT, (1<<16) | (w & 0xffff)); #endif } static void Neo2097SubsequentColorExpandScanline(ScrnInfoPtr pScrn, int bufno) { #ifdef NEO_DO_CLIPPING /* Should I be waiting for fifo slots to prevent retries ? How do I do that on this engine ? */ #else NEOPtr nPtr = NEOPTR(pScrn); NEOACLPtr nAcl = NEOACLPTR(pScrn); if (!(--nAcl->CPUToScreenColorExpandFill_h)) return; WAIT_ENGINE_IDLE(); OUTREG(NEOREG_SRCSTARTOFF, 0); OUTREG(NEOREG_DSTSTARTOFF, ((++nAcl->CPUToScreenColorExpandFill_y)<<16) | (nAcl->CPUToScreenColorExpandFill_x & 0xffff)); OUTREG(NEOREG_XYEXT, (1<<16) | (nAcl->CPUToScreenColorExpandFill_w & 0xffff)); #endif } #if 0 static void Neo2097SetupForMono8x8PatternFill(ScrnInfoPtr pScrn, int patternx, int patterny, int fg, int bg, int rop, unsigned int planemask) { NEOPtr nPtr = NEOPTR(pScrn); NEOACLPtr nAcl = NEOACLPTR(pScrn); if (bg == -1) { /* transparent setup */ nAcl->tmpBltCntlFlags = ( nAcl->BltCntlFlags | NEO_BC0_SRC_MONO | NEO_BC0_FILL_PAT | NEO_BC0_SRC_TRANS | NEO_BC3_SKIP_MAPPING | NEO_BC3_SRC_XY_ADDR | NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]); WAIT_ENGINE_IDLE(); OUTREG(NEOREG_FGCOLOR, fg |= (fg << nAcl->ColorShiftAmt)); OUTREG(NEOREG_SRCSTARTOFF, (patterny << 16) | patternx); } else { /* opaque setup */ nAcl->tmpBltCntlFlags = ( nAcl->BltCntlFlags | NEO_BC0_SRC_MONO | NEO_BC0_FILL_PAT | NEO_BC3_SKIP_MAPPING | NEO_BC3_SRC_XY_ADDR | NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]); WAIT_ENGINE_IDLE(); OUTREG(NEOREG_FGCOLOR, fg |= (fg << nAcl->ColorShiftAmt)); OUTREG(NEOREG_BGCOLOR, bg |= (bg << nAcl->ColorShiftAmt)); OUTREG(NEOREG_SRCSTARTOFF, (patterny << 16) | patternx); } } static void Neo2097SubsequentMono8x8PatternFill(ScrnInfoPtr pScrn, int patternx, int patterny, int x, int y, int w, int h) { NEOPtr nPtr = NEOPTR(pScrn); NEOACLPtr nAcl = NEOACLPTR(pScrn); patterny &= 0x7; WAIT_ENGINE_IDLE(); OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags | (patterny << 20)); /* OUTREG(NEOREG_SRCBITOFF, patternx); Bad Register */ OUTREG(NEOREG_DSTSTARTOFF, (y<<16) | (x & 0xffff)); OUTREG(NEOREG_XYEXT, (h<<16) | (w & 0xffff)); } #endif static void Neo2097SetupForScanlineImageWrite( ScrnInfoPtr pScrn, int rop, unsigned int planemask, int transparency_color, int bpp, int depth ){ NEOACLPtr nAcl = NEOACLPTR(pScrn); nAcl->tmpBltCntlFlags = (nAcl->BltCntlFlags | NEO_BC0_SYS_TO_VID | NEO_BC3_SKIP_MAPPING | NEO_BC3_DST_XY_ADDR | neo2097Rop[rop]); } static void Neo2097SubsequentScanlineImageWriteRect( ScrnInfoPtr pScrn, int x, int y, int w, int h, int skipleft ){ NEOPtr nPtr = NEOPTR(pScrn); NEOACLPtr nAcl = NEOACLPTR(pScrn); WAIT_ENGINE_IDLE(); OUTREG(NEOREG_BLTCNTL, nAcl->tmpBltCntlFlags); OUTREG(NEOREG_SRCSTARTOFF, 0); OUTREG(NEOREG_DSTSTARTOFF, (y << 16) | (x & 0xffff)); OUTREG(NEOREG_XYEXT, (h << 16) | w); } static void Neo2097SubsequentImageWriteScanline( ScrnInfoPtr pScrn, int bufno ){ /* should I be checking for fifo slots here ? */ }