/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/nsc/nsc_driver.c,v 1.4tsi Exp $ */ /* * $Workfile: nsc_driver.c $ * $Revision: 1.1 $ * $Author: matthieu $ * * File Contents: This is the main module configures the interfacing * with the X server. The individual modules will be * loaded based upon the options selected from the * XF86Config. This file also has modules for finding * supported modes, turning on the modes based on options. * * Project: Nsc Xfree Frame buffer device driver. * */ /* * NSC_LIC_ALTERNATIVE_PREAMBLE * * Revision 1.0 * * National Semiconductor Alternative GPL-BSD License * * National Semiconductor Corporation licenses this software * ("Software"): * * National Xfree frame buffer driver * * under one of the two following licenses, depending on how the * Software is received by the Licensee. * * If this Software is received as part of the Linux Framebuffer or * other GPL licensed software, then the GPL license designated * NSC_LIC_GPL applies to this Software; in all other circumstances * then the BSD-style license designated NSC_LIC_BSD shall apply. * * END_NSC_LIC_ALTERNATIVE_PREAMBLE */ /* NSC_LIC_BSD * * National Semiconductor Corporation Open Source License for * * National Xfree frame buffer driver * * (BSD License with Export Notice) * * Copyright (c) 1999-2001 * National Semiconductor Corporation. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials provided * with the distribution. * * * Neither the name of the National Semiconductor Corporation nor * the names of its contributors may be used to endorse or promote * products derived from this software without specific prior * written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * NATIONAL SEMICONDUCTOR CORPORATION OR CONTRIBUTORS BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE, * INTELLECTUAL PROPERTY INFRINGEMENT, OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * EXPORT LAWS: THIS LICENSE ADDS NO RESTRICTIONS TO THE EXPORT LAWS OF * YOUR JURISDICTION. It is licensee's responsibility to comply with * any export regulations applicable in licensee's jurisdiction. Under * CURRENT (2001) U.S. export regulations this software * is eligible for export from the U.S. and can be downloaded by or * otherwise exported or reexported worldwide EXCEPT to U.S. embargoed * destinations which include Cuba, Iraq, Libya, North Korea, Iran, * Syria, Sudan, Afghanistan and any other country to which the U.S. * has embargoed goods and services. * * END_NSC_LIC_BSD */ /* NSC_LIC_GPL * * National Semiconductor Corporation Gnu General Public License for * * National Xfree frame buffer driver * * (GPL License with Export Notice) * * Copyright (c) 1999-2001 * National Semiconductor Corporation. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted under the terms of the GNU General * Public License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version * * In addition to the terms of the GNU General Public License, neither * the name of the National Semiconductor Corporation nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * NATIONAL SEMICONDUCTOR CORPORATION OR CONTRIBUTORS BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE, * INTELLECTUAL PROPERTY INFRINGEMENT, OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. See the GNU General Public License for more details. * * EXPORT LAWS: THIS LICENSE ADDS NO RESTRICTIONS TO THE EXPORT LAWS OF * YOUR JURISDICTION. It is licensee's responsibility to comply with * any export regulations applicable in licensee's jurisdiction. Under * CURRENT (2001) U.S. export regulations this software * is eligible for export from the U.S. and can be downloaded by or * otherwise exported or reexported worldwide EXCEPT to U.S. embargoed * destinations which include Cuba, Iraq, Libya, North Korea, Iran, * Syria, Sudan, Afghanistan and any other country to which the U.S. * has embargoed goods and services. * * You should have received a copy of the GNU General Public License * along with this file; if not, write to the Free Software Foundation, * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * END_NSC_LIC_GPL */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #define DEBUG(x) #define NSC_TRACE 0 #define HWVGA 1 /* Includes that are used by all drivers */ #include "xf86.h" #include "xf86_OSproc.h" #include "xf86Resources.h" /* We may want inb() and outb() */ #include "compiler.h" /* We may want to access the PCI config space */ #include "xf86PciInfo.h" #include "xf86Pci.h" /* Colormap handling stuff */ #include "xf86cmap.h" #define RC_MAX_DEPTH 24 /* Frame buffer stuff */ #include "fb.h" #include "shadowfb.h" /* Machine independent stuff */ #include "mipointer.h" #include "mibank.h" #include "micmap.h" /* All drivers implementing backing store need this */ #include "mibstore.h" #include "vgaHW.h" #include "vbe.h" /* Check for some extensions */ #ifdef XFreeXDGA #define _XF86_DGA_SERVER_ #include #endif /* XFreeXDGA */ #include "globals.h" #include "opaque.h" #define DPMS_SERVER #include #define EXTERN /* Our private include file (this also includes the durango headers) */ #include "nsc.h" #if NSC_TRACE /* ANSI C does not allow var arg macros */ #define GeodeDebug(args) DebugPort(DCount++);ErrorF args #else #define GeodeDebug(args) #endif /* A few things all drivers should have */ #define NSC_NAME "NSC" #define NSC_DRIVER_NAME "nsc" /* This should match the durango code version. * The patchlevel may be used to indicate changes in geode.c */ #define NSC_VERSION_NAME "2.8.1" #define NSC_VERSION_MAJOR 2 #define NSC_VERSION_MINOR 8 #define NSC_PATCHLEVEL 1 #define NSC_VERSION_CURRENT ((NSC_VERSION_MAJOR << 24) | \ (NSC_VERSION_MINOR << 16) | NSC_PATCHLEVEL) /* Forward definitions */ static const OptionInfoRec *NscAvailableOptions(int chipid, int busid); static void NscIdentify(int); static Bool NscProbe(DriverPtr, int); static int CPUDetected; extern void GX1SetupChipsetFPtr(ScrnInfoPtr pScrn); extern void GX2SetupChipsetFPtr(ScrnInfoPtr pScrn); #if !defined(STB_X) extern unsigned char *XpressROMPtr; #endif /* STB_X */ /* driver record contains the functions needed by the server after loading * the driver module. */ _X_EXPORT DriverRec NSC = { NSC_VERSION_CURRENT, NSC_DRIVER_NAME, NscIdentify, NscProbe, NscAvailableOptions, NULL, 0 }; /* Existing Processor Models */ #define GX1 0x1 #define GX2 0x2 #define GX2_CRT 0x6 #define GX2_TFT 0xA #define PCI_VENDOR_ID_CYRIX 0x1078 #define PCI_VENDOR_ID_NS 0x100B #define PCI_CHIP_5530 0x0104 #define PCI_CHIP_SC1200 0x0504 #define PCI_CHIP_SC1400 0x0104 #define PCI_CHIP_REDCLOUD 0x0030 /* National Chip Models */ typedef struct _DEVICE_MODEL { int DeviceId; int Model; } DeviceModel; DeviceModel ChipModel[] = { {PCI_CHIP_5530, GX1}, {PCI_CHIP_SC1200, GX1}, {PCI_CHIP_SC1400, GX1}, {PCI_CHIP_REDCLOUD, GX2}, {-1, 0} }; /* Supported chipsets */ SymTabRec GeodeChipsets[] = { {PCI_CHIP_5530, "5530"}, {PCI_CHIP_SC1200, "SC1200"}, {PCI_CHIP_SC1400, "SC1400"}, {PCI_CHIP_REDCLOUD, "REDCLOUD"}, {-1, NULL} }; PciChipsets GeodePCIchipsets[] = { {PCI_CHIP_5530, PCI_CHIP_5530, RES_SHARED_VGA}, {PCI_CHIP_SC1200, PCI_CHIP_SC1200, RES_SHARED_VGA}, {PCI_CHIP_SC1400, PCI_CHIP_SC1400, RES_SHARED_VGA}, {PCI_CHIP_REDCLOUD, PCI_CHIP_REDCLOUD, RES_SHARED_VGA}, {-1, -1, RES_UNDEFINED}, }; OptionInfoRec GeodeOptions[] = { {OPTION_SW_CURSOR, "SWcursor", OPTV_BOOLEAN, {0}, FALSE}, {OPTION_HW_CURSOR, "HWcursor", OPTV_BOOLEAN, {0}, FALSE}, {OPTION_NOCOMPRESSION, "NoCompression", OPTV_BOOLEAN, {0}, FALSE}, {OPTION_NOACCEL, "NoAccel", OPTV_BOOLEAN, {0}, FALSE}, {OPTION_TV_SUPPORT, "TV", OPTV_ANYSTR, {0}, FALSE}, {OPTION_TV_OUTPUT, "TV_Output", OPTV_ANYSTR, {0}, FALSE}, {OPTION_TV_OVERSCAN, "TVOverscan", OPTV_ANYSTR, {0}, FALSE}, {OPTION_SHADOW_FB, "ShadowFB", OPTV_BOOLEAN, {0}, FALSE}, {OPTION_ROTATE, "Rotate", OPTV_ANYSTR, {0}, FALSE}, {OPTION_FLATPANEL, "FlatPanel", OPTV_BOOLEAN, {0}, FALSE}, {OPTION_COLOR_KEY, "ColorKey", OPTV_INTEGER, {0}, FALSE}, {OPTION_OSM_IMG_BUFS, "OSMImageBuffers", OPTV_INTEGER, {0}, FALSE}, {-1, NULL, OPTV_NONE, {0}, FALSE} }; /* List of symbols from other modules that this module references.The purpose * is that to avoid unresolved symbol warnings */ const char *nscVgahwSymbols[] = { "vgaHWGetHWRec", "vgaHWUnlock", "vgaHWInit", "vgaHWSave", "vgaHWRestore", "vgaHWProtect", "vgaHWGetIOBase", "vgaHWMapMem", "vgaHWLock", "vgaHWFreeHWRec", "vgaHWSaveScreen", NULL }; const char *nscVbeSymbols[] = { "VBEInit", "vbeDoEDID", "vbeFree", NULL }; const char *nscInt10Symbols[] = { "xf86ExecX86int10", "xf86InitInt10", "xf86Int10AllocPages", "xf86Int10Addr", NULL }; const char *nscFbSymbols[] = { "fbScreenInit", "fbPictureInit", NULL }; const char *nscXaaSymbols[] = { "XAADestroyInfoRec", "XAACreateInfoRec", "XAAInit", NULL }; const char *nscRamdacSymbols[] = { "xf86InitCursor", "xf86CreateCursorInfoRec", "xf86DestroyCursorInfoRec", NULL }; const char *nscShadowSymbols[] = { "ShadowFBInit", NULL }; #ifdef XFree86LOADER /* Module loader interface */ static MODULESETUPPROTO(NscSetup); static XF86ModuleVersionInfo NscVersionRec = { "nsc", MODULEVENDORSTRING, MODINFOSTRING1, MODINFOSTRING2, XORG_VERSION_CURRENT, NSC_VERSION_MAJOR, NSC_VERSION_MINOR, NSC_PATCHLEVEL, ABI_CLASS_VIDEODRV, /* This is a video driver */ ABI_VIDEODRV_VERSION, MOD_CLASS_VIDEODRV, {0, 0, 0, 0} }; /* * This data is accessed by the loader. The name must be the module name * followed by "ModuleInit". */ _X_EXPORT XF86ModuleData nscModuleData = { &NscVersionRec, NscSetup, NULL }; /*------------------------------------------------------------------------- * NscSetup. * * Description :This function sets up the driver in X list and load the * module symbols through xf86loader routines.. * * Parameters. * Module :Pointer to the geode module * options :Driver module options. * ErrorMajor:Major no * ErrorMinor:Minor no. * * Returns :NULL on success * * Comments :Module setup is done by this function * *------------------------------------------------------------------------- */ static pointer NscSetup(pointer Module, pointer Options, int *ErrorMajor, int *ErrorMinor) { static Bool Initialised = FALSE; if (!Initialised) { Initialised = TRUE; xf86AddDriver(&NSC, Module, 0); /* Tell the loader about symbols from other modules that this * module might refer to. */ LoaderRefSymLists(nscVgahwSymbols, nscVbeSymbols, nscFbSymbols, nscXaaSymbols, nscInt10Symbols, nscRamdacSymbols, nscShadowSymbols, NULL); return (pointer) TRUE; } /*The return value must be non-NULL on success */ if (ErrorMajor) *ErrorMajor = LDR_ONCEONLY; return NULL; } #endif /*End of XFree86Loader */ /*------------------------------------------------------------------------- * NscIdentify. * * Description : This function identify an Nscfamily version. * * * Parameters. * flags : flags may be used in PreInit* * * Returns : none * * Comments : none * *------------------------------------------------------------------------ */ static void NscIdentify(int flags) { xf86PrintChipsets(NSC_NAME, "Nsc family driver (version " NSC_VERSION_NAME ") " "for chipsets", GeodeChipsets); } /*---------------------------------------------------------------------------- * NscAvailableOptions. * * Description :This function returns the geodeoptions set geodeoption * * Parameters. * chipid :This will identify the chipset. * busid :This will identify the PCI busid * * Returns :ptr to GeodeOptions. * * Comments :none * *---------------------------------------------------------------------------- */ static const OptionInfoRec * NscAvailableOptions(int chipid, int busid) { return GeodeOptions; } /*---------------------------------------------------------------------------- * NscProbe. * * Description :This is to find that hardware is claimed by another * driver if not claim the slot & allocate ScreenInfoRec. * * Parameters. * drv :a pointer to the geode driver * flags :flags may passed to check the config and probe detect * * Returns :TRUE on success and FALSE on failure. * * Comments :This should ne minimal probe and it should under no * circumstances change the state of the hardware.Don't do * any intiallizations other than the required * ScreenInforec. *---------------------------------------------------------------------------- */ static Bool NscProbe(DriverPtr drv, int flags) { Bool foundScreen = FALSE; int numDevSections, numUsed; GDevPtr *devSections = NULL; int *usedChips = NULL; int i; GeodeDebug(("NscProbe: Probing for supported devices!\n")); /* * * Find the config file Device sections that match this * * driver, and return if there are none. */ if ((numDevSections = xf86MatchDevice(NSC_NAME, &devSections)) <= 0) { GeodeDebug(("NscProbe: failed 1!\n")); return FALSE; } GeodeDebug(("NscProbe: Before MatchPciInstances!\n")); /* PCI BUS */ if (xf86GetPciVideoInfo()) { numUsed = xf86MatchPciInstances(NSC_NAME, PCI_VENDOR_ID_NS, GeodeChipsets, GeodePCIchipsets, devSections, numDevSections, drv, &usedChips); if (numUsed <= 0) { /* Check for old CYRIX vendor ID (5530) */ numUsed = xf86MatchPciInstances(NSC_NAME, PCI_VENDOR_ID_CYRIX, GeodeChipsets, GeodePCIchipsets, devSections, numDevSections, drv, &usedChips); } GeodeDebug(("NscProbe: MatchPCI (%d)!\n", numUsed)); if (numUsed > 0) { if (flags & PROBE_DETECT) foundScreen = TRUE; else { /* Durango only supports one instance, */ /* so take the first one */ for (i = 0; i < numUsed; i++) { /* Allocate a ScrnInfoRec */ ScrnInfoPtr pScrn = xf86AllocateScreen(drv, 0); EntityInfoPtr pEnt = xf86GetEntityInfo(usedChips[i]); PciChipsets *p_id; for (p_id = GeodePCIchipsets; p_id->numChipset != -1; p_id++) { if (pEnt->chipset == p_id->numChipset) { CPUDetected = GX1; if (pEnt->chipset == PCI_CHIP_REDCLOUD) CPUDetected = GX2; break; } } xfree(pEnt); GeodeDebug(("NscProbe: CPUDetected %d!\n", CPUDetected)); pScrn->driverName = NSC_DRIVER_NAME; pScrn->name = NSC_NAME; pScrn->Probe = NscProbe; if (CPUDetected == GX1) { GX1SetupChipsetFPtr(pScrn); } else { /* GX2 */ GX2SetupChipsetFPtr(pScrn); } foundScreen = TRUE; xf86ConfigActivePciEntity(pScrn, usedChips[i], GeodePCIchipsets, NULL, NULL, NULL, NULL, NULL); } } } } if (usedChips) xfree(usedChips); if (devSections) xfree(devSections); GeodeDebug(("NscProbe: result (%d)!\n", foundScreen)); return foundScreen; }