/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/s3virge/s3v_dac.c,v 1.4 2003/02/04 02:20:50 dawes Exp $ */

/*
Copyright (C) 1994-1998 The XFree86 Project, Inc.  All Rights Reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of
this software and associated documentation files (the "Software"), to deal in
the Software without restriction, including without limitation the rights to
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
of the Software, and to permit persons to whom the Software is furnished to do
so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FIT-
NESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Except as contained in this notice, the name of the XFree86 Project shall not
be used in advertising or otherwise to promote the sale, use or other dealings
in this Software without prior written authorization from the XFree86 Project.
*/

/*
 * s3v_dac.c
 * Port to 4.0 design level
 *
 * S3 ViRGE driver
 *
 *
 * s3vcommonCalcClock from S3gendac.c in pre 4.0 tree.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include	"s3v.h"


#define BASE_FREQ         14.31818   /* MHz */


	/* function */
void
S3VCommonCalcClock(ScrnInfoPtr pScrn, DisplayModePtr mode,
		   long freq, int min_m, int min_n1, 
		   int max_n1, int min_n2, int max_n2, 
		   long freq_min, long freq_max,
		   unsigned char * mdiv, unsigned char * ndiv)
{
   double ffreq, ffreq_min, ffreq_max, ffreq_min_warn;
   double div, diff, best_diff;
   unsigned int m;
   unsigned char n1, n2;
   unsigned char best_n1=16+2, best_n2=2, best_m=125+2;

   ffreq     = freq     / 1000.0 / BASE_FREQ;
   ffreq_min = freq_min / 1000.0 / BASE_FREQ;
   ffreq_max = freq_max / 1000.0 / BASE_FREQ;

   /* Doublescan modes can run at half the min frequency */
   /* But only use that value for warning and changing */
   /* ffreq, don't change the actual min used for clock calcs below. */
   if(mode->Flags & V_DBLSCAN && ffreq_min)
     ffreq_min_warn = ffreq_min / 2;
   else
     ffreq_min_warn = ffreq_min;

   if (ffreq < ffreq_min_warn / (1<<max_n2)) {
      xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
		 "invalid frequency %1.3f MHz  [freq <= %1.3f MHz]\n", 
		 ffreq*BASE_FREQ, ffreq_min_warn*BASE_FREQ / (1<<max_n2));
      ffreq = ffreq_min_warn / (1<<max_n2);
   }
   if (ffreq > ffreq_max / (1<<min_n2)) {
      xf86DrvMsg(pScrn->scrnIndex, X_ERROR,      
		 "invalid frequency %1.3f MHz  [freq >= %1.3f MHz]\n", 
		 ffreq*BASE_FREQ, ffreq_max*BASE_FREQ / (1<<min_n2));
      ffreq = ffreq_max / (1<<min_n2);
   }

   /* work out suitable timings */

   best_diff = ffreq;
   
   for (n2=min_n2; n2<=max_n2; n2++) {
      for (n1 = min_n1+2; n1 <= max_n1+2; n1++) {
	 m = (int)(ffreq * n1 * (1<<n2) + 0.5) ;
	 if (m < min_m+2 || m > 127+2) 
	    continue;
	 div = (double)(m) / (double)(n1);	 
	 if ((div >= ffreq_min) &&
	     (div <= ffreq_max)) {
	    diff = ffreq - div / (1<<n2);
	    if (diff < 0.0) 
	       diff = -diff;
	    if (diff < best_diff) {
	       best_diff = diff;
	       best_m    = m;
	       best_n1   = n1;
	       best_n2   = n2;
	    }
	 }
      }
   }
   
#ifdef EXTENDED_DEBUG
   ErrorF("Clock parameters for %1.6f MHz: m=%d, n1=%d, n2=%d\n",
	  ((double)(best_m) / (double)(best_n1) / (1 << best_n2)) * BASE_FREQ,
	  best_m-2, best_n1-2, best_n2);
#endif
  
   if (max_n1 == 63)
      *ndiv = (best_n1 - 2) | (best_n2 << 6);
   else
      *ndiv = (best_n1 - 2) | (best_n2 << 5);
   *mdiv = best_m - 2;
}