#ifdef HAVE_CONFIG_H #include "config.h" #endif #include "tseng.h" /* * * ET4000 HWCursor is disabled currently: we need to find a way to set the * sprite colours. * */ /* * ET4000W32 sprite engine. */ static CARD8 ET4000CursorRead(CARD8 Index) { outb(0x217A, Index); return inb(0x217B); } static void ET4000CursorWrite(CARD8 Index, CARD8 Value) { outb(0x217A, Index); outb(0x217B, Value); } /* * */ static Bool TsengUseHWCursor(ScreenPtr pScreen, CursorPtr pCurs) { /* have this return false for DoubleScan and Interlaced ? */ return TRUE; } static void TsengShowCursor(ScrnInfoPtr pScrn) { unsigned char tmp; TsengPtr pTseng = TsengPTR(pScrn); /* Enable the hardware cursor. */ if (pTseng->ChipType == ET6000) { tmp = ET6000IORead(pTseng, 0x46); ET6000IOWrite(pTseng, 0x46, (tmp | 0x01)); } else { tmp = ET4000CursorRead(0xF7); ET4000CursorWrite(0xF7, tmp | 0x80); } } static void TsengHideCursor(ScrnInfoPtr pScrn) { unsigned char tmp; TsengPtr pTseng = TsengPTR(pScrn); /* Disable the hardware cursor. */ if (pTseng->ChipType == ET6000) { tmp = ET6000IORead(pTseng, 0x46); ET6000IOWrite(pTseng, 0x46, (tmp & 0xfe)); } else { tmp = ET4000CursorRead(0xF7); ET4000CursorWrite(0xF7, tmp & ~0x80); } } static void TsengSetCursorPosition(ScrnInfoPtr pScrn, int x, int y) { int xorigin, yorigin; TsengPtr pTseng = TsengPTR(pScrn); /* * If the cursor is partly out of screen at the left or top, * we need to modify the origin. */ xorigin = 0; yorigin = 0; if (x < 0) { xorigin = -x; x = 0; } if (y < 0) { yorigin = -y; y = 0; } #ifdef TODO /* Correct cursor position in DoubleScan modes */ if (XF86SCRNINFO(pScr)->modes->Flags & V_DBLSCAN) y *= 2; #endif if (pTseng->ChipType == ET6000) { ET6000IOWrite(pTseng, 0x82, xorigin); ET6000IOWrite(pTseng, 0x83, yorigin); ET6000IOWrite(pTseng, 0x84, (x & 0xff)); ET6000IOWrite(pTseng, 0x85, ((x >> 8) & 0x0f)); ET6000IOWrite(pTseng, 0x86, (y & 0xff)); ET6000IOWrite(pTseng, 0x87, ((y >> 8) & 0x0f)); } else { ET4000CursorWrite(0xE2, xorigin); ET4000CursorWrite(0xE6, yorigin); ET4000CursorWrite(0xE0, x & 0xFF); ET4000CursorWrite(0xE1, (x >> 8) & 0x0F); ET4000CursorWrite(0xE4, y & 0xFF); ET4000CursorWrite(0xE5, (y >> 8) & 0x0F); } } /* * The ET6000 cursor color is only 6 bits, with 2 bits per color. This * is of course very inaccurate, but high-bit-depth color differences * are only visible on _large_ planes of equal color. i.e. small areas * of a certain color (like a cursor) don't need many bits per pixel at * all, because the difference will not be seen. * * So it won't be as bad, but should still be documented nonetheless. */ static void TsengSetCursorColors(ScrnInfoPtr pScrn, int bg, int fg) { TsengPtr pTseng = TsengPTR(pScrn); unsigned char et6k_fg, et6k_bg; if (pTseng->ChipType == ET6000) { et6k_fg = (fg & 0x00000003) | ((fg & 0x00000300) >> 6) | ((fg & 0x00030000) >> 12); et6k_bg = (bg & 0x00000003) | ((bg & 0x00000300) >> 6) | ((bg & 0x00030000) >> 12); ET6000IOWrite(pTseng, 0x67, 0x09); /* prepare for colour data */ ET6000IOWrite(pTseng, 0x69, et6k_bg); ET6000IOWrite(pTseng, 0x69, et6k_fg); } else { /* * The ET4000 uses color 0 as sprite color "0", and color 0xFF as * sprite color "1". Changing colors implies changing colors 0 and * 255. This is currently not implemented. * * In non-8bpp modes, this would result in always black and white * colors (since the colormap isn't there to translate 0 and 255 to * other colors). And besides, in non-8bpp, there seem to be TWO * cursor images on the screen... */ xf86Msg(X_ERROR, "Internal error: ET4000 hardware cursor color changes not implemented\n"); } } void TsengLoadCursorImage(ScrnInfoPtr pScrn, unsigned char *bits) { vgaHWPtr hwp = VGAHWPTR(pScrn); TsengPtr pTseng = TsengPTR(pScrn); CARD8 tmp; #ifdef DEBUG_HWC int i; int d; for (i = 0; i < 1024; i++) { d = *(bits + i); ErrorF("%d%d%d%d", d & 0x03, (d >> 2) & 0x03, (d >> 4) & 0x03, (d >> 6) & 0x03); if ((i & 15) == 15) ErrorF("\n"); } #endif /* * Program the cursor image address in video memory. * We need to set it here or we might loose it on mode/vt switches. */ if (pTseng->ChipType == ET6000) { /* bits 19:16 */ tmp = hwp->readCrtc(hwp, 0x0E) & 0xF0; tmp |= ((pTseng->HWCursorBufferOffset / 4) >> 16) & 0x0F; hwp->writeCrtc(hwp, 0x0E, tmp); /* bits 15:8 */ hwp->writeCrtc(hwp, 0x0F, ((pTseng->HWCursorBufferOffset / 4) >> 8) & 0xFF); /* on the ET6000, bits (7:0) are always 0 */ } else { /* bits 19:16 */ tmp = ET4000CursorRead(0xEA) & 0xF0; ET4000CursorWrite(0xEA, tmp | (((pTseng->HWCursorBufferOffset / 4) >> 16) & 0x0F)); /* bits 15:8 */ ET4000CursorWrite(0xE9, ((pTseng->HWCursorBufferOffset / 4) >> 8) & 0xFF); /* bits 7:0 */ ET4000CursorWrite(0xE8, (pTseng->HWCursorBufferOffset / 4) & 0xFF); /* this needs to be set for the sprite */ ET4000CursorWrite(0xEB, 0x02); tmp = ET4000CursorRead(0xEC); ET4000CursorWrite(0xEC, tmp & 0xFE); tmp = ET4000CursorRead(0xEF) & 0xF8; ET4000CursorWrite(0xEF, tmp | 0x02); ET4000CursorWrite(0xEE, 0x01); } /* this assumes the apertures have been set up correctly for banked mode */ memcpy(pTseng->HWCursorBuffer, bits, 1024); } /* * * */ Bool TsengHWCursorInit(ScreenPtr pScreen) { ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; TsengPtr pTseng = TsengPTR(pScrn); xf86CursorInfoPtr infoPtr; PDEBUG(" TsengHWCursorInit\n"); if (!pTseng->HWCursor) return FALSE; infoPtr = xf86CreateCursorInfoRec(); if (!infoPtr) return FALSE; pTseng->CursorInfoRec = infoPtr; /* calculate memory addres from video memory offsets */ pTseng->HWCursorBuffer = pTseng->FbBase + pTseng->HWCursorBufferOffset; /* set up the XAA HW cursor structure */ infoPtr->MaxWidth = 64; infoPtr->MaxHeight = 64; infoPtr->Flags = HARDWARE_CURSOR_TRUECOLOR_AT_8BPP | HARDWARE_CURSOR_SOURCE_MASK_INTERLEAVE_1 | HARDWARE_CURSOR_AND_SOURCE_WITH_MASK | HARDWARE_CURSOR_INVERT_MASK; infoPtr->SetCursorColors = TsengSetCursorColors; infoPtr->SetCursorPosition = TsengSetCursorPosition; infoPtr->LoadCursorImage = TsengLoadCursorImage; infoPtr->HideCursor = TsengHideCursor; infoPtr->ShowCursor = TsengShowCursor; infoPtr->UseHWCursor = TsengUseHWCursor; return (xf86InitCursor(pScreen, infoPtr)); } /* * */ void TsengCursorStore(ScrnInfoPtr pScrn, TsengRegPtr Reg) { TsengPtr pTseng = TsengPTR(pScrn); if (pTseng->ChipType == ET4000) Reg->CursorCtrl = ET4000CursorRead(0xF7); } /* * */ void TsengCursorRestore(ScrnInfoPtr pScrn, TsengRegPtr Reg) { TsengPtr pTseng = TsengPTR(pScrn); if (pTseng->ChipType == ET4000) ET4000CursorWrite(0xF7, Reg->CursorCtrl); }