diff options
Diffstat (limited to 'Makefile.in')
| -rw-r--r-- | Makefile.in | 887 |
1 files changed, 0 insertions, 887 deletions
diff --git a/Makefile.in b/Makefile.in deleted file mode 100644 index f183338..0000000 --- a/Makefile.in +++ /dev/null @@ -1,887 +0,0 @@ -# Makefile.in generated by automake 1.12.6 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2012 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# -# Copyright 2005 Red Hat, Inc. -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of Red Hat not be used in -# advertising or publicity pertaining to distribution of the software without -# specific, written prior permission. Red Hat makes no -# representations about the suitability of this software for any purpose. It -# is provided "as is" without express or implied warranty. -# -# RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, -# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO -# EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR -# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, -# DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER -# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -# PERFORMANCE OF THIS SOFTWARE. -VPATH = @srcdir@ -am__make_dryrun = \ - { \ - am__dry=no; \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ - | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ - *) \ - for am__flg in $$MAKEFLAGS; do \ - case $$am__flg in \ - *=*|--*) ;; \ - *n*) am__dry=yes; break;; \ - esac; \ - done;; \ - esac; \ - test $$am__dry = yes; \ - } -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = . -DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL TODO \ - config.guess config.sub depcomp install-sh ltmain.sh missing -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/ax_define_dir.m4 \ - $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ - $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ - $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - cscope distdir dist dist-all distcheck -ETAGS = etags -CTAGS = ctags -CSCOPE = cscope -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ - || { sleep 5 && rm -rf "$(distdir)"; }; \ - else :; fi -am__post_remove_distdir = $(am__remove_distdir) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 -GZIP_ENV = --best -DIST_TARGETS = dist-bzip2 dist-gzip -distuninstallcheck_listfiles = find . -type f -print -am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ - | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ -ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -APPDEFS_CFLAGS = @APPDEFS_CFLAGS@ -APPDEFS_LIBS = @APPDEFS_LIBS@ -APP_MAN_DIR = @APP_MAN_DIR@ -APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ -AR = @AR@ -AUTH_CFLAGS = @AUTH_CFLAGS@ -AUTH_LIBS = @AUTH_LIBS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -BASE_CFLAGS = @BASE_CFLAGS@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CHANGELOG_CMD = @CHANGELOG_CMD@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CWARNFLAGS = @CWARNFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFAULTVT = @DEFAULTVT@ -DEFS = @DEFS@ -DEF_AUTH_DIR = @DEF_AUTH_DIR@ -DEF_FAILSAFE_CLIENT = @DEF_FAILSAFE_CLIENT@ -DEF_SERVER_LINE = @DEF_SERVER_LINE@ -DEF_SESSION = @DEF_SESSION@ -DEF_SYSTEM_PATH = @DEF_SYSTEM_PATH@ -DEF_SYSTEM_SHELL = @DEF_SYSTEM_SHELL@ -DEF_USER_PATH = @DEF_USER_PATH@ -DEF_XENODM_CONFIG = @DEF_XENODM_CONFIG@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ -DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -FILE_MAN_DIR = @FILE_MAN_DIR@ -FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_CMD = @INSTALL_CMD@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIB_MAN_DIR = @LIB_MAN_DIR@ -LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ -LINT = @LINT@ -LINT_FLAGS = @LINT_FLAGS@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MAN_SUBSTS = @MAN_SUBSTS@ -MISC_MAN_DIR = @MISC_MAN_DIR@ -MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ -MKDIR_P = @MKDIR_P@ -MKTEMP_COMMAND = @MKTEMP_COMMAND@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SHELL_CMD = @SHELL_CMD@ -STRICT_CFLAGS = @STRICT_CFLAGS@ -STRIP = @STRIP@ -UTMP_FILE = @UTMP_FILE@ -VERSION = @VERSION@ -WTMP_FILE = @WTMP_FILE@ -XDMGREET_CFLAGS = @XDMGREET_CFLAGS@ -XDMGREET_LIBS = @XDMGREET_LIBS@ -XENODMCONFIGDIR = @XENODMCONFIGDIR@ -XENODMLIBDIR = @XENODMLIBDIR@ -XENODMLOGDIR = @XENODMLOGDIR@ -XENODMSCRIPTDIR = @XENODMSCRIPTDIR@ -XENODMXAUTHDIR = @XENODMXAUTHDIR@ -XENODM_BWPIXMAP = @XENODM_BWPIXMAP@ -XENODM_CFLAGS = @XENODM_CFLAGS@ -XENODM_LIBS = @XENODM_LIBS@ -XENODM_PIXMAP = @XENODM_PIXMAP@ -XENODM_PIXMAPDIR = @XENODM_PIXMAPDIR@ -XENODM_TOOLKIT_CFLAGS = @XENODM_TOOLKIT_CFLAGS@ -XENODM_TOOLKIT_LIBS = @XENODM_TOOLKIT_LIBS@ -XFT_CFLAGS = @XFT_CFLAGS@ -XFT_LIBS = @XFT_LIBS@ -XINERAMA_CFLAGS = @XINERAMA_CFLAGS@ -XINERAMA_LIBS = @XINERAMA_LIBS@ -XLIB_CFLAGS = @XLIB_CFLAGS@ -XLIB_LIBS = @XLIB_LIBS@ -XORG_MAN_PAGE = @XORG_MAN_PAGE@ -XPM_CFLAGS = @XPM_CFLAGS@ -XPM_LIBS = @XPM_LIBS@ -XRDB_PROGRAM = @XRDB_PROGRAM@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -appdefaultdir = @appdefaultdir@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = config greeter include man xenodm -ACLOCAL_AMFLAGS = -I m4 - -# This ensures distcheck is performed in a location where user has write access -DISTCHECK_CONFIGURE_FLAGS = \ - --with-appdefaultdir=\$${datadir}/X11/app-defaults - -@LINT_TRUE@ALL_LINT_FLAGS = $(LINT_FLAGS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ -@LINT_TRUE@ $(AM_CPPFLAGS) $(CPPFLAGS) - -MAINTAINERCLEANFILES = ChangeLog INSTALL -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -am--refresh: Makefile - @: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -config.h: stamp-h1 - @if test ! -f $@; then rm -f stamp-h1; else :; fi - @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool config.lt - -# This directory's subdirectories are mostly independent; you can cd -# into them and run 'make' without going through this Makefile. -# To change the values of 'make' variables: instead of editing Makefiles, -# (1) if the variable is set in 'config.status', edit 'config.status' -# (which will cause the Makefiles to be regenerated when you run 'make'); -# (2) otherwise, pass the desired values on the 'make' command line. -$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done -cscopelist-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -cscope: cscope.files - test ! -s cscope.files \ - || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) - -clean-cscope: - -rm -f cscope.files - -cscope.files: clean-cscope cscopelist-recursive cscopelist - -cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -rm -f cscope.out cscope.in.out cscope.po.out cscope.files - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - $(am__make_dryrun) \ - || test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" distdir="$(distdir)" \ - dist-hook - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__post_remove_distdir) -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 - $(am__post_remove_distdir) - -dist-lzip: distdir - tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz - $(am__post_remove_distdir) - -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz - $(am__post_remove_distdir) - -dist-tarZ: distdir - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__post_remove_distdir) - -dist-shar: distdir - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__post_remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__post_remove_distdir) - -dist dist-all: - $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' - $(am__post_remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lz*) \ - lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir) - chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(AM_DISTCHECK_CONFIGURE_FLAGS) \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__post_remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @test -n '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: trying to run $@ with an empty' \ - '$$(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - $(am__cd) '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile config.h -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-hdr \ - distclean-libtool distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ - cscopelist-recursive ctags-recursive install-am install-strip \ - tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am am--refresh check check-am clean clean-cscope \ - clean-generic clean-libtool cscope cscopelist \ - cscopelist-recursive ctags ctags-recursive dist dist-all \ - dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar dist-tarZ \ - dist-xz dist-zip distcheck distclean distclean-generic \ - distclean-hdr distclean-libtool distclean-tags distcleancheck \ - distdir distuninstallcheck dvi dvi-am html html-am info \ - info-am install install-am install-data install-data-am \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am - - -@LINT_TRUE@lint: -@LINT_TRUE@ $(LINT) $(ALL_LINT_FLAGS) $(xdm_CFLAGS) $(xdm_SOURCES) $(xdm_LIBS) -@LINT_TRUE@ (cd xdm && $(MAKE) $(AM_MAKEFLAGS) lint) -@LINT_TRUE@ (cd greeter && $(MAKE) $(AM_MAKEFLAGS) lint) - -.PHONY: ChangeLog INSTALL - -INSTALL: - $(INSTALL_CMD) - -ChangeLog: - $(CHANGELOG_CMD) - -dist-hook: ChangeLog INSTALL - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: |