path: root/NEWS

0.13.3 (2004-06-13)
- Added support for Synaptics cPad devices. (Also requires a 2.6
  kernel patch.) From Jan Steinhoff.
- Bug fix for touchpads with a middle mouse button.
- Fixed handling of the repeater device.
- Fixed compiler warnings when using the xorg sdk include files.
- Added two parameters:
  * MaxDoubleTapTime makes it easier to do fast double clicks.
  * ClickTime adds a delay between the button down and button up
    events generated in response to a tap event.
- Updated the alps patch for kernel 2.6.7-rc3.
- Added -V option to synclient to display the version number.
- Updated the compatibility list.

0.13.2 (2004-05-09)
- Fixed middle mouse button emulation, which broke in the 0.13.0
  release.
- Made double clicks faster, so that they work in xmms and the gtk
  file selector. (They became slower in the 0.13.0 release.)
- Updated the compatibility list.

0.13.1 (2004-05-03)
- Fixed detection of ALPS touchpads when using a 2.6 linux kernel.
- Added more models to the compatibility list.
- Added a "GuestMouseOff" parameter to disable the pass through
  device. From Moritz Maass.

0.13.0 (2004-04-24)
- Added back support for the TOP Makefile variable. (Needed when
  compiling for XFree86 < 4.2).
- Fixed "double tap and drag", which is needed for word selection from
  an xterm.
- Made it possible to bind the CornerButton and TapButton parameters
  to button values > 3.
- Locked drags incorrectly generated extra button events in some
  cases.
- Handle synaptics touchpads with a middle mouse button. Based on a
  2.6 kernel patch from Dmitry Torokhov.
- Added (untested) support for the FreeBSD psm mouse driver.
- If the evdev kernel module seems to be missing, say so in the log
  file. (Very common error situation when using 2.6 kernels.)
- Added support for ALPS touchpads using the 2.4 linux kernel.
- Removed "repeater" from the shared memory segment. It's not possible
  to share pointers between different address spaces.
- Added more models to the compatibility list.
- Various documentation updates.
- Some code cleanups.

0.12.5 (2004-03-04)
- Added more models to the compatibility list.
- Added support for physical (ie not emulated) middle mouse buttons.
  Some ALPS models have middle mouse buttons.
- The is_equal() function in synclient.c forgot to check
  multibuttons.
- Reverted ALPS gesture bit handling to the 0.12.1 state, as the code
  in 0.12.2 breaks tap-and-drag operations on some ALPS touchpads.
- Added pressure dependent edge motion speed. From Matthias Ihmig.
- Made it possible to use "edge motion" also when not dragging. From
  Matthias Ihmig.
- Made it possible to disable vertical and horizontal scrolling by
  setting the corresponding parameter to zero. From Matthias Ihmig.
- Made it possible to have both circular scrolling and
  vertical/horizontal scrolling enabled at the same time. From
  Matthias Ihmig.
- Minor documentation updates.

0.12.4 (2004-02-10)
- Changed suggested default values in the INSTALL file, to get more
  reasonable speed settings and edge parameters.
- Include time in the "synclient -m" output.
- Handle touchpads with a scroll region on the right side where very
  large X coordinates (typically 8176=0x1ff0) are reported.
- Added more models to the compatibility list.
- Updated the documentation.
- Added support for circular scrolling. From Alexei Gilchrist.
- Removed the saved_touchpad_off variable in syndaemon. It's more
  robust to just not disable the touchpad if it already is disabled.
- Added manpages for synclient and syndaemon. Contributed by Mattia
  Dongili.
- Added uninstall target to the Makefile. From Paul Bender.
- Automatically build using the 4.3 SDK if available. Patch from Paul
  Bender.
- Removed unnecessary local X include files that are available in the
  XFree86-devel package. Patch from Paul Bender.
- Added a "distribution" target to the Makefile.
- Added an RPM .spec file. From Giorgio Bellussi.

0.12.3 (2004-01-11)
- Added more models to the compatibility list.
- Updated the documentation.
- Added French translation of the INSTALL file. Contributed by Rigot
  Michel.
- Removed deprecated use of psmouse_noext in the alps patch. This
  makes the patch work also for recent -mm kernels. (This breaks alps
  support for kernels older than 2.6.1-rc1, but those kernels should
  not be used anyway.)

0.12.2 (2003-12-17)
- Added more models to the compatibility list.
- Updated the documentation.
- Added an fflush() call after the printf in the monitor loop in
  synclient.c. This makes "synclient -m" behave better when the output
  is piped to some other program. From Anders Kaseorg.
- Added parameter settings to the InputDevice example in README.alps,
  so that the whole thing can be cut and pasted into the XFree86
  config file. Suggestion from Gene Imes.
- Made syndaemon recognize the '?' option, causing the help message to
  be printed.
- In the syndaemon help message, print the default disable time.
  Suggestion from Frédéric Bothamy.
- Only use the -fno-merge-constants compiler flag if the compiler
  understands it.
- Updated INSTALL.DE. Translation contributed by Markus B.
- Added pass through support, ie support for guest devices. From David
  Kennedy and Fred Hucht, somewhat cleaned up by me.
- Updated the alps.patch to handle the gesture bit correctly. From Tom
  Sightler.
- Made tap processing configurable. Patch from Justin Quek, cleaned up
  somewhat by me.

0.12.1 (2003-11-14)
- Added more models to the compatibility list.
- Updated the documentation.
- Added "syndaemon", a program that monitors keyboard activity and
  disables the touchpad when the keyboard is being used.
- Some code cleanup.
- Made the packet checking code less strict, so that the driver works
  also for touchpads that don't strictly follow the synaptics absolute
  protocol. Problem reported by Anders Kaseorg using a PowerPro C 3:16
  laptop.
- Rediffed the alps patch for kernel 2.6.0-test9-bk16.
- Removed compatibility code for old (<test6) 2.6 kernels.
- No longer support installation from a precompiled binary. It should
  be possible for everyone to compile from source.

0.12.0 (2003-10-26)
- Initial support for ALPS touchpads.
- Implemented "locked drags" after a suggestion from Karl Kashofer.
- In the synclient program, use case insensitive string matching for
  parameter names.
- Report all eight multi buttons in the synclient program.
- Print the driver version string before other driver messages.
- Added more models to the compatibility list.
- Some documentation updates.

0.11.8 (2003-10-08)
- Initialize the id variable in QueryIsSynaptics(), so that we don't
  print out garbage if the identification fails.
- Added "Sharp Actius MM10" to the compatibility list.
- Added X include files so that the driver can be compiled without an
  external XFree86 source tree.
- Some documentation updates.

0.11.7 (2003-09-28)
- Added "Acer TravelMate 234LC" to the compatibility list.
- Added "Gateway 600S" to the compatibility list.
- When using the Linux 2.6 event device, try to get exclusive access
  to the device, so that touchpad data doesn't leak to
  /dev/input/mice. This should fix problems with recent 2.6 kernels.

0.11.6 (2003-09-26)
- Updated the config section in INSTALL.DE. Added warning explaining
  that the file is not up to date.
- Forgot to change the default values for TopEdge and BottomEdge when
  reversing the Y direction in version 0.11.5.
- Warn about (and fix) mis-configured TopEdge/BottomEdge parameters.

0.11.5 (2003-09-25)
- Use the EVIOCGID ioctl for synaptics event device auto detection.
  This is much simpler than parsing /proc/bus/input/devices and more
  robust too.
- Added support for the new 2.6 kernel events ABS_TOOL_WIDTH,
  BTN_TOOL_FINGER, BTN_TOOL_DOUBLETAP and BTN_TOOL_TRIPLETAP. Note
  that this swaps the direction of the Y axis internally to match X
  and the linux input subsystem. Because of this, the TopEdge and
  BottomEdge parameters must be modified in the config file. There is
  some backwards compatibility code for old 2.5/2.6 kernels that will
  probably be deleted later.

0.11.4 (2003-09-22)
- Reset the touchpad if it has been out of sync for too long. (By
  Hartwig Felger, cleaned up somewhat by me.) The synaptics manual
  explains that the touchpad can revert to relative mode after a power
  glitch or electrostatic discharge.
- Created a helper macro to get rid of all the ugly "#ifdef DEBUG" in
  ps2comm.c.
- Made "make tags" work for emacs.
- Changed tab size from 4 to the standard value 8. Reindented code so
  that it still looks sane.
- Fixed spelling errors.
- synaptics: Added "Acer 661 LCi" to the compatibility list.
- Made it possible to disable the touchpad at runtime. (Patch from
  Jörg Bösner.)
- Clarified description of FingerLow/FingerHigh parameters.
- Added "DELL Latitude CPi" to the compatibility list.
- Changed the identifier for the synaptics protocol to match kernel
  2.6.0-test5-bk8.

0.11.3p11 (2003-07-31)
- When setting the mode byte, don't set bits that the touchpad doesn't
  understand. Those bits are reserved and setting them can lead to
  weird problems, like the left button not working, as reported by
  Miles Lane.
- Replaced a few forgotten hardcoded values with symbolic constants.
- Disable stream mode before trying to identify/initialize the
  touchpad. Otherwise the touchpad can report motion data in the
  middle of the initialization sequence, which will confuse the driver
  and make the initialization fail. (Thanks to Miles Lane for helping
  to debug this problem.)
- Updated COMPATIBILITY file.

0.11.3p10 (2003-07-30)
- Improved support for the old-style synaptics protocol.
- Cleanup: Moved middle mouse button emulation to a separate function.
- Cleanup: Moved finger detection to a separate function.
- More robust resynchronization code, after an idea from Hartwig
  Felger. When we realize we are out of sync, only throw away one
  byte, not all bytes already read from the touchpad.

0.11.3p9: (2003-07-29)
- Added support for the old synaptics protocol. By Hartwig Felger.

0.11.3p8: (2003-07-20)
- From Hartwig Felger:
  * Added "multi-buttons" to the FEATURES list.
  * Updated NEWS file with data from the web page.
  * More robust parsing of the Handlers= line when doing auto detection
    for 2.6 kernels. ("Handlers=event2 js0" should work now.)
  * Updated synclient program to explain that it can't query hardware
    details when using a 2.6 kernel.

0.11.3p7: (2003-07-17)
- Added support for touchpads with "multi buttons". (Hartwig Felger)
- Mention the synclient program in the INSTALL file.
- Updated COMPATIBILITY file.
- Implemented protocol "auto-dev" that automatically tries to find the
  proper device node and protocol for the touchpad. This makes it
  possible to have the same XF86Config file for 2.4 and 2.5 kernels.
  (Hartwig Felger)

0.11.3p6: (2003-07-13)
- Build fix for gentoo linux.
- Longer timeout in the reset sequence. Experience from the 2.5 kernel
  driver has shown that 4 seconds is needed for some touchpads.
- Made horizontal wheel replacement buttons work. (Patch from Hartwig
  Felger.)
- Improved driver initialisation and finalization. From Hartwig
  Felger.
- Reset the touchpad to relative mode when the X server
  terminates. (So that you can run gpm afterwards for example.)
- Implemented install target in the Makefile.

0.11.3p5: (2003-07-08)
- Fixed rare X server hang/crash.

0.11.3p4: (2003-07-05)
- Workaround for an X server bug that could make the X server crash.
- Fixed bug that sometimes incorrectly moved the cursor to the upper
  right corner of the screen.

0.11.3p3: (2003-06-19)
- Added support for linux kernel 2.5.x.

0.11.?
- Updated the synclient program to make it possible to read and write
  the variables in the shared memory area. This means you can change
  parameter settings without restarting the X server.
- More reliable implementation of double click simulation using the up
  button. The old implementation incorrectly generated a single click
  instead of a double click for very short clicks of the up button.
- Configurable timeout (option EmulateMidButtonTime) for middle button
  emulation.
- Better state machine for handling middle mouse button emulation.
  * Clicks shorter than EmulateMidButtonTime are no longer lost.
  * The middle button event is generated as soon as both the left and
    the right buttons are pressed. The old code waited until the
    timeout had passed before even checking if both buttons were
    pressed.
- Makefile improvements:
  * Made it possible to build synclient even if an X source tree is
    not available.
  * Added Makefile dependencies so that things get recompiled when a
    header file is changed.
  * synclient.c now includes synaptics.h instead of duplicating the
    shared memory structure definition.
- The shared memory segment is properly removed when the X server
  exits, so that synclient isn't fooled by a stale segment if the X
  server is later restarted without SHMConfig activated.
- The code that tried to remove any old shared memory segment at
  startup before creating the new segment didn't work. Therefore, X
  server startup failed if the size of the shared segment had changed.
  (Which was very annoying during development.)
- Updated the TODO, PARAMETERS and FEATURES files.


09.06.02 - Version 0.11.1
- new packet format for Firmware 5.8 and others; solves problems with some
  models with 6 buttons (S. Lehner <sam_x@bluemail.ch>)

13.10.01 - Version 0.10
- multifinger taps