Initial revision

1 files changed, 137 insertions, 0 deletions

diff --git a/README.r128.sgml b/README.r128.sgml
new file mode 100644
index 00000000..db1ef8af
--- /dev/null
+++ b/README.r128.sgml
@@ -0,0 +1,137 @@
+<!DOCTYPE linuxdoc PUBLIC "-//XFree86//DTD linuxdoc//EN"[
+<!ENTITY % defs SYSTEM "defs.ent"> %defs;
+]>
+
+<article>
+<title>Information for ATI Rage 128 Users
+<author>Precision Insight, Inc., SuSE GmbH
+<date>13 June 2000
+
+<ident>
+$XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/r128.sgml,v 1.8 2000/06/14 00:16:09 dawes Exp $
+</ident>
+
+<toc>
+
+<sect>Supported Hardware
+<p>
+<itemize>
+  <item>ATI Rage 128 based cards
+</itemize>
+
+
+<sect>Features
+<p>
+<itemize>
+  <item>Full support (including hardware accelerated 2D drawing) for 8, 15,
+        16, 24 bit pixel depths.
+  <item>Hardware cursor support to reduce sprite flicker.
+  <item>Support for high resolution video modes up to 1800x1440 @ 70Hz.
+  <item>Support for doublescan video modes (e.g., 320x200 and 320x240).
+  <item>Support for gamma correction at all pixel depths.
+  <item>Fully programmable clock supported.
+  <item>Robust text mode restore for VT switching.
+</itemize>
+
+
+<sect>Technical Notes
+<p>
+<itemize>
+  <item>None
+</itemize>
+
+
+<sect>Reported Working Video Cards
+<p>
+<itemize>
+  <item>Rage Fury AGP 32MB
+  <item>XPERT 128 AGP 16MB
+  <item>XPERT 99 AGP 8MB
+</itemize>
+
+
+<sect>Configuration
+<p>
+The driver auto-detects all device information necessary to
+initialize the card.  The only lines you need in the "Device"
+section of your XF86Config file are:
+<verb>
+       Section "Device"
+           Identifier "Rage 128"
+           Driver     "r128"
+       EndSection
+</verb>
+or let <tt>xf86config</tt> do this for you.
+
+However, if you have problems with auto-detection, you can specify:
+<itemize>
+  <item>VideoRam - in kilobytes
+  <item>MemBase  - physical address of the linear framebuffer
+  <item>IOBase   - physical address of the memory mapped IO registers
+  <item>ChipID   - PCI DEVICE ID
+</itemize>
+
+
+<sect>Driver Options
+<p>
+<itemize>
+  <item>"hw_cursor" - request hardware cursor (default)
+  <item>"sw_cursor" - software cursor only
+  <item>"no_accel"  - software rendering only
+  <item>"dac_8_bit" - use color weight 888 in 8 bpp mode (default)
+  <item>"dac_6_bit" - use color weight 666 in 8 bpp mode (VGA emulation)
+</itemize>
+
+
+<sect>Known Limitations
+<p>
+<itemize>
+  <item>None
+</itemize>
+
+
+<sect>Authors
+<p>
+The XFree86 4 driver was ported from XFree86 3.3.x and enhanced by:
+<itemize>
+   <item>Rickard E. (Rik) Faith <email>faith@precisioninsight.com</email>
+   <item>Kevin E. Martin <email>kevin@precisioninsight.com</email>
+</itemize>
+<p>
+The XFree86 4 driver was funded by ATI and was donated to The XFree86
+Project by:
+<verb>
+    Precision Insight, Inc.
+    Cedar Park, TX
+    USA
+</verb>
+<p>
+The XFree86 3.3.x driver used for the port was written by:
+<itemize>
+   <item>Rickard E. (Rik) Faith <email>faith@precisioninsight.com</email>
+   <item>Kevin E. Martin <email>kevin@precisioninsight.com</email>
+</itemize>
+The XFree86 3.3.x driver was funded by ATI and was donated to The XFree86
+Project by Precision Insight, Inc.  It was based in part on an earlier
+driver that was written by:
+<itemize>
+   <item>Alan Hourihane <email>alanh@fairlite.demon.co.uk</email>
+   <item>Dirk Hohndel <email>hohndel@suse.de</email>
+</itemize>
+<p>This early driver was funded and donated to The XFree86 Project by:
+<verb>
+    SuSE GmbH
+    Schanzaekerstr. 10
+    90443 Nuernberg
+    Germany
+</verb>
+
+<p>
+<htmlurl name="http://www.precisioninsight.com"
+          url="http://www.precisioninsight.com">
+<p>
+<htmlurl name="http://www.suse.com"
+          url="http://www.suse.com">
+
+
+</article>