Keep PCI mach64 only (atipreinit.c, atimode.c), drop:

- Chip < ATI_CHIP_88800GXC
- Chipset != ATI_CHIPSET_ATI
- Adapter != ATI_ADAPTER_MACH64

- depth < 8

atimode.c only:

- NewHW.crtc != ATI_CRTC_MACH64

  This allows to drop VGACalculate(), VGAWonderCalculate() cruft early.

1 files changed, 0 insertions, 132 deletions

diff --git a/src/atiwonder.c b/src/atiwonder.c
index e6a4ec26..6822872f 100644
--- a/src/atiwonder.c
+++ b/src/atiwonder.c
@@ -132,138 +132,6 @@ ATIVGAWonderSave
 }
 
 /*
- * ATIVGAWonderCalculate --
- *
- * This function fills in the VGA Wonder portion of an ATIHWRec structure
- * occurrence.
- */
-void
-ATIVGAWonderCalculate
-(
-    ATIPtr         pATI,
-    ATIHWPtr       pATIHW,
-    DisplayModePtr pMode
-)
-{
-    /* Set up the default horizontal display enable skew */
-    if ((pATI->Chip >= ATI_CHIP_28800_2) && (pATI->Chip <= ATI_CHIP_28800_6) &&
-        !(pMode->Flags & V_HSKEW))
-    {
-        /*
-         * Modes using the higher clock frequencies need a non-zero Display
-         * Enable Skew.  The following number has been empirically determined
-         * to be somewhere between 4.2 and 4.7 MHz.
-         */
-#       define DisplayEnableSkewThreshold 4500
-
-        /* Set a reasonable default Display Enable Skew */
-        pMode->HSkew = pMode->CrtcHSkew =
-            ATIDivide(pMode->SynthClock, DisplayEnableSkewThreshold, 0, 0);
-    }
-    pMode->Flags |= V_HSKEW;
-
-    /*
-     * Fill in mode-specific VGA Wonder data.
-     */
-    pATIHW->b0 = 0x00U;
-    if (pATI->depth >= 8)
-        pATIHW->b0 = 0x20U;
-    if (pATI->Chip >= ATI_CHIP_28800_2)
-    {
-        if (pATI->VideoRAM > 512)
-            pATIHW->b0 |= 0x08U;
-        else if (pATI->VideoRAM > 256)
-            pATIHW->b0 |= 0x10U;
-    }
-    else if (pATI->depth <= 4)
-    {
-        if (pATI->VideoRAM > 256)
-            pATIHW->b0 |= 0x08U;
-    }
-    else
-    {
-        if (pATI->VideoRAM > 256)
-            pATIHW->b0 |= 0x18U;
-        else
-            pATIHW->b0 |= 0x06U;
-    }
-    pATIHW->b1 = ATIGetExtReg(0xB1U) & 0x04U;
-    /*
-     * Setting the following bit causes hangs on return to text mode from
-     * packed modes on 18800-1's.  The hang occurs because the adapter's I/O
-     * response is completely disabled when the register is rewritten.  The
-     * adapter can then only be re-enabled with a powerdown.  The bit, when on,
-     * blanks out the overscan.
-     */
-    if ((pATI->Chip == ATI_CHIP_18800_1) && (pATI->depth >= 8))
-        pATIHW->b5 = 0x00U;
-    else
-        pATIHW->b5 = 0x01U;
-    pATIHW->b8 = ATIGetExtReg(0xB8U) & 0xC0U;
-    pATIHW->b9 = ATIGetExtReg(0xB9U) & 0x7FU;
-    pATIHW->bd = ATIGetExtReg(0xBDU) & 0x02U;
-    if (pATI->Chip <= ATI_CHIP_18800)
-        pATIHW->b2 = ATIGetExtReg(0xB2U) & 0xC0U;
-    else
-    {
-        pATIHW->b2 = 0x00U;
-        pATIHW->be = (ATIGetExtReg(0xBEU) & 0x30U) | 0x09U;
-        if (pATI->Chip >= ATI_CHIP_28800_2)
-        {
-            pATIHW->a6 = (ATIGetExtReg(0xA6U) & 0x38U) | 0x04U;
-            pATIHW->a7 = (ATIGetExtReg(0xA7U) & 0xBEU)        ;
-            pATIHW->ac = (ATIGetExtReg(0xACU) & 0x8EU)        ;
-        }
-    }
-    if (pMode->Flags & V_INTERLACE)
-    {                                   /* Enable interlace */
-        if (pATI->Chip <= ATI_CHIP_18800)
-            pATIHW->b2 |= 0x01U;
-        else
-            pATIHW->be |= 0x02U;
-    }
-#if 0   /* This is no longer needed but is left in for reference */
-    if (pMode->Flags & V_DBLSCAN)       /* Enable doublescan */
-        pATIHW->b1 |= 0x08U;
-#endif
-    if (pATI->OptionCSync || (pMode->Flags & (V_CSYNC | V_PCSYNC)))
-        pATIHW->bd |= 0x08U;            /* Enable composite sync */
-    if (pMode->Flags & V_NCSYNC)
-        pATIHW->bd |= 0x09U;            /* Invert composite sync */
-    if (pMode->HSkew > 0)
-    {
-        if (pMode->HSkew <= 3)
-            pATIHW->b5 |= 0x04U;
-        else if (pATI->Chip >= ATI_CHIP_28800_2)
-            switch ((pMode->HSkew + 4) >> 3)
-            {
-                case 1:         /* Use ATI override */
-                    pATIHW->crt[3] &= ~0x60U;
-                    pATIHW->b0 |= 0x01U;
-                    break;
-                case 2:         /* Use ATI override */
-                    pATIHW->crt[3] &= ~0x60U;
-                    pATIHW->a6 |= 0x01U;
-                    break;
-                case 3:
-                    pATIHW->crt[3] |= 0x60U;
-                    break;
-                case 4:
-                    pATIHW->a7 |= 0x40U;
-                    break;
-                case 5:
-                    pATIHW->ac |= 0x10U;
-                    break;
-                case 6:
-                    pATIHW->ac |= 0x20U;
-                    break;
-                default:
-                    break;
-            }
-    }
-}
-
-/*
  * ATIVGAWonderSet --
  *
  * This function loads the VGA Wonder portion of a video state.