diff options
Diffstat (limited to 'man')
-rw-r--r-- | man/ati.man | 30 | ||||
-rw-r--r-- | man/r128.man | 132 | ||||
-rw-r--r-- | man/radeon.man | 218 |
3 files changed, 380 insertions, 0 deletions
diff --git a/man/ati.man b/man/ati.man new file mode 100644 index 00000000..abd7da31 --- /dev/null +++ b/man/ati.man @@ -0,0 +1,30 @@ +.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/ati.man,v 1.2 2001/01/27 18:20:46 dawes Exp $ +.\" shorthand for double quote that works everywhere. +.ds q \N'34' +.TH ATI __drivermansuffix__ __vendorversion__ +.SH NAME +ati \- ATI video driver +.SH SYNOPSIS +.nf +.B "Section \*qDevice\*q" +.BI " Identifier \*q" devname \*q +.B " Driver \*qati\*q" +\ \ ... +.B EndSection +.fi +.SH DESCRIPTION +.B ati +is an XFree86 driver for ATI video cards. +THIS MAN PAGE NEEDS TO BE FILLED IN. +.SH SUPPORTED HARDWARE +The +.B ati +driver supports... +.SH CONFIGURATION DETAILS +Please refer to XF86Config(__filemansuffix__) for general configuration +details. This section only covers configuration details specific to this +driver. +.SH "SEE ALSO" +XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) +.SH AUTHORS +Authors include: ... diff --git a/man/r128.man b/man/r128.man new file mode 100644 index 00000000..0bb990a3 --- /dev/null +++ b/man/r128.man @@ -0,0 +1,132 @@ +.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128.man,v 1.4 2002/06/04 23:04:50 dawes Exp $ +.\" shorthand for double quote that works everywhere. +.ds q \N'34' +.TH R128 __drivermansuffix__ __vendorversion__ +.SH NAME +r128 \- ATI Rage 128 video driver +.SH SYNOPSIS +.nf +.B "Section \*qDevice\*q" +.BI " Identifier \*q" devname \*q +.B " Driver \*qr128\*q" +\ \ ... +.B EndSection +.fi +.SH DESCRIPTION +.B r128 +is an XFree86 driver for ATI Rage 128 based video cards. It contains +full support for 8, 15, 16 and 24 bit pixel depths, hardware +acceleration of drawing primitives, hardware cursor, video modes up to +1800x1440 @ 70Hz, doublescan modes (e.g., 320x200 and 320x240), gamma +correction at all pixel depths, a fully programming dot clock and robust +text mode restoration for VT switching. +.SH SUPPORTED HARDWARE +The +.B r128 +driver supports all ATI Rage 128 based video cards including the Rage +Fury AGP 32MB, the XPERT 128 AGP 16MB and the XPERT 99 AGP 8MB. +.SH CONFIGURATION DETAILS +Please refer to XF86Config(__filemansuffix__) for general configuration +details. This section only covers configuration details specific to this +driver. +.PP +The driver auto-detects all device information necessary to initialize +the card. However, if you have problems with auto-detection, you can +specify: +.PP +.RS 4 +VideoRam - in kilobytes +.br +MemBase - physical address of the linear framebuffer +.br +IOBase - physical address of the MMIO registers +.br +ChipID - PCI DEVICE ID +.RE +.PP +In addition, the following driver +.B Options +are supported: +.TP +.BI "Option \*qSWcursor\*q \*q" boolean \*q +Selects software cursor. The default is +.B off. +.TP +.BI "Option \*qNoAccel\*q \*q" boolean \*q +Enables or disables all hardware acceleration. The default is to +.B enable +hardware acceleration. +.TP +.BI "Option \*qDac6Bit\*q \*q" boolean \*q +Enables or disables the use of 6 bits per color component when in 8 bpp +mode (emulates VGA mode). By default, all 8 bits per color component +are used. The default is +.B off. +.TP +.BI "Option \*qVideoKey\*q \*q" integer \*q +This overrides the default pixel value for the YUV video overlay key. +The default value is +.B undefined. +.TP +.BI "Option \*qDisplay\*q \*q" string \*q +Select display mode for devices which support flat panels. Supported modes are: + +.B \*qFP\*q +- use flat panel; + +.B \*qCRT\*q +- use cathode ray tube; + +.B \*qMirror\*q +- use both FP and CRT; + +.B \*qBIOS\*q +- use mode as configured in the BIOS. + +The default is +.B FP. + +.PP +The following +.B Options +are mostly important for non-x86 architectures: +.TP +.BI "Option \*qProgramFPRegs\*q \*q" boolean \*q +Enable or disable programming of the flat panel registers. +Beware that this may damage your panel, so use this +.B at your own risk. +The default depends on the device. +.TP +.BI "Option \*qPanelWidth\*q \*q" integer \*q +.TP +.BI "Option \*qPanelHeight\*q \*q" integer \*q +Override the flat panel dimensions in pixels. They are used to program the flat panel +registers and normally determined using the video card BIOS. If the wrong dimensions +are used, the system may hang. +.TP +.BI "Option \*qUseFBDev\*q \*q" boolean \*q +Enable or disable use of an OS-specific framebuffer device interface +(which is not supported on all OSs). See fbdevhw(__drivermansuffix__) +for further information. +Default: off. +.TP +.BI "Option \*qDMAForXv\*q \*q" boolean \*q +Try or don't try to use DMA for Xv image transfers. This will reduce CPU +usage when playing big videos like DVDs, but may cause instabilities. +Default: off. + +.PP +The following additional +.B Options +are supported: +.TP +.BI "Option \*qShowCache\*q \*q" boolean \*q +Enable or disable viewing offscreen cache memory. A +development debug option. Default: off. + +.SH "SEE ALSO" +XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) +.SH AUTHORS +.nf +Rickard E. (Rik) Faith \fIfaith@precisioninsight.com\fP +Kevin E. Martin \fIkevin@precisioninsight.com\fP diff --git a/man/radeon.man b/man/radeon.man new file mode 100644 index 00000000..d0c6547d --- /dev/null +++ b/man/radeon.man @@ -0,0 +1,218 @@ +.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon.man,v 1.0 2003/01/31 23:04:50 +.ds q \N'34' +.TH RADEON __drivermansuffix__ __vendorversion__ +.SH NAME +radeon \- ATI RADEON video driver +.SH SYNOPSIS +.nf +.B "Section \*qDevice\*q" +.BI " Identifier \*q" devname \*q +.B " Driver \*qradeon\*q" +\ \ ... +.B EndSection +.fi +.SH DESCRIPTION +.B radeon +is a XFree86 driver for ATI RADEON based video cards. It contains +full support for 8, 15, 16 and 24 bit pixel depths, dual-head setup, +flat panel, hardware 2D acceleration, hardware 3D acceleration +(except R300 cards), hardware cursor, XV extension, Xinerama extension. +.SH SUPPORTED HARDWARE +The +.B radeon +driver supports PCI and AGP video cards based on the following ATI chips +.TP 12 +.B R100 +Radeon 7200 +.TP 12 +.B RV100 +Radeon 7000(VE), M6 +.TP 12 +.B RV200 +Radeon 7500, M7 +.TP 12 +.B R200 +Radeon 8500, 9100, FireGL 8800/8700 +.TP 12 +.B RV250 +Radeon 9000, M9 +.TP 12 +.B R300 +Radeon 9700PRO/9700/9500PRO/9500, FireGL X1/Z1 + +.SH CONFIGURATION DETAILS +Please refer to XF86Config(__filemansuffix__) for general configuration +details. This section only covers configuration details specific to this +driver. +.PP +The driver auto\-detects all device information necessary to initialize +the card. However, if you have problems with auto\-detection, you can +specify: +.PP +.RS 4 +VideoRam \- in kilobytes +.br +MemBase \- physical address of the linear framebuffer +.br +IOBase \- physical address of the MMIO registers +.br +ChipID \- PCI DEVICE ID +.RE +.PP +In addition, the following driver +.B Options +are supported: +.TP +.BI "Option \*qSWcursor\*q \*q" boolean \*q +Selects software cursor. The default is +.B off. +.TP +.BI "Option \*qNoAccel\*q \*q" boolean \*q +Enables or disables all hardware acceleration. +.br +The default is to +.B enable +hardware acceleration. +.TP +.BI "Option \*qDac6Bit\*q \*q" boolean \*q +Enables or disables the use of 6 bits per color component when in 8 bpp +mode (emulates VGA mode). By default, all 8 bits per color component +are used. +.br +The default is +.B off. +.TP +.BI "Option \*qVideoKey\*q \*q" integer \*q +This overrides the default pixel value for the YUV video overlay key. +.br +The default value is +.B undefined. +.TP +.BI "Option \*qUseFBDev\*q \*q" boolean \*q +Enable or disable use of an OS\-specific framebuffer device interface +(which is not supported on all OSs). See fbdevhw(__drivermansuffix__) +for further information. +.br +The default is +.B off. +.TP +.BI "Option \*qAGPMode\*q \*q" integer \*q +Set AGP data transfer rate. +(used only when DRI is enabled) +.br +1 \-\- x1 (default) +.br +2 \-\- x2 +.br +4 \-\- x4 +.br +others \-\- invalid +.TP +.BI "Option \*qAGPFastWrite\*q \*q" boolean \*q +Enable AGP fast write. +.br +(used only when DRI is enabled) +.br +The default is +.B off. +.TP +.BI "Option \*qForcePCIMode\*q \*q" boolean \*q +Force to use PCI GART for DRI acceleration. +.br +(used only when DRI is enabled) +.br +The default is +.B off. +.TP +.BI "Option \*qDDCMode\*q \*q" boolean \*q +Force to use the modes queried from the connected monitor. +.br +The default is +.B off. +.TP +.BI "Option \*qCloneDisplay\*q \*q" integer \*q +.br +This option is only used for dual\-head cards with only single +screen section specified in the configuration file. + +0 \-\- disable +.br +1 \-\- auto\-detect (default) +.br +2 \-\- force on +.br +3 \-\- auto\-detect + 2nd head overlay +.br +4 \-\- force on + 2nd head overlay +.br +others \-\- auto\-detect + +.B disable +means only one CRTC is used for both heads. +.B auto\-detect +means the secondary head will be driven by CRTC2 +if a monitor is detected there. +.B force on +means the secondary head will be driven by CRTC2 +even no monitor is detected there. +.B 2nd-head overlay +means the only hardware overlay will be placed to the secondary head. + +Primary/Secondary head for dual\-head cards: +.br +(when only one port is used, it will be treated as the primary regardless) +.br +.B Primary head: +.br +DVI port on DVI+VGA cards +.br +LCD output on laptops +.br +Internal TMDS prot on DVI+DVI cards +.br +.B Secondary head: +.br +VGA port on DVI+VGA cards +.br +VGA port on laptops +.br +External TMDS port on DVI+DVI cards + +.TP +.BI "Option \*qCloneMode\*q \*q" "string" \*q +Set the first mode for the secondary head. +It can be different from the modes used for the primary head. If you don't +have this line while clone is on, the modes specified for the primary head +will be used for the secondary head. +.TP +.BI "Option \*qCloneHSync\*q \*q" "string" \*q +Set the horizontal sync range for the secondary monitor. +It is not required if a DDC\-capable monitor is connected. +.br +The default value is +.B undefined. +.TP +.BI "Option \*qCloneVRefresh\*q \*q" "string" \*q +Set the vertical refresh range for the secondary monitor. +It is not required if a DDC\-capable monitor is connected. +.br +The default value is +.B undefined. +.TP +.BI "Option \*qPanelOff\*q \*q" boolean \*q +Disable panel output. Only used when clone is enabled. +.br +The default value is +.B off. +.TP +.BI "Option \*qEnablePageFlip\*q \*q" boolean \*q +Enable page flipping for 3D acceleration. This will increase performance +but not work correctly in some rare cases, hence the default is +.B off. + + +.SH SEE ALSO +XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__) +.SH AUTHORS +.nf +Authors include: ... |