diff options
Diffstat (limited to 'src/atipreinit.c')
| -rw-r--r-- | src/atipreinit.c | 3443 |
1 files changed, 0 insertions, 3443 deletions
diff --git a/src/atipreinit.c b/src/atipreinit.c deleted file mode 100644 index 71aa0498..00000000 --- a/src/atipreinit.c +++ /dev/null @@ -1,3443 +0,0 @@ -/* $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/atipreinit.c,v 1.69 2003/08/23 17:10:42 tsi Exp $ */ -/* - * Copyright 1999 through 2003 by Marc Aurele La France (TSI @ UQV), tsi@xfree86.org - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that copyright - * notice and this permission notice appear in supporting documentation, and - * that the name of Marc Aurele La France not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Marc Aurele La France makes no representations - * about the suitability of this software for any purpose. It is provided - * "as-is" without express or implied warranty. - * - * MARC AURELE LA FRANCE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO - * EVENT SHALL MARC AURELE LA FRANCE BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include "ati.h" -#include "atiadapter.h" -#include "atiadjust.h" -#include "atiaudio.h" -#include "atibus.h" -#include "atichip.h" -#include "aticonfig.h" -#include "aticursor.h" -#include "atidac.h" -#include "atidsp.h" -#include "atii2c.h" -#include "atiident.h" -#include "atiload.h" -#include "atilock.h" -#include "atimach64.h" -#include "atimach64accel.h" -#include "atimach64io.h" -#include "atimode.h" -#include "atipreinit.h" -#include "atiprint.h" -#include "atividmem.h" -#include "atiwonderio.h" -#include "atixv.h" - -#include "vbe.h" -#include "xf86RAC.h" - -#ifndef AVOID_CPIO - -typedef CARD16 Colour; /* The correct spelling should be OK :-) */ - -/* - * Bit patterns which are extremely unlikely to show up when reading from - * nonexistant memory (which normally shows up as either all bits set or all - * bits clear). - */ -static const Colour Test_Pixel[] = {0x5AA5U, 0x55AAU, 0xA55AU, 0xCA53U}; - -static const struct -{ - int videoRamSize; - int Miscellaneous_Options_Setting; - struct - { - short int x, y; - } - Coordinates[NumberOf(Test_Pixel) + 1]; -} -Test_Case[] = -{ - /* - * Given the engine settings used, only a 4M card will have enough memory - * to back up the 1025th line of the display. Since the pixel coordinates - * are zero-based, line 1024 will be the first one which is only backed on - * 4M cards. - * - * <Mark_Weaver@brown.edu>: - * In case memory is being wrapped, (0,0) and (0,1024) to make sure they - * can each hold a unique value. - */ - {4096, MEM_SIZE_4M, {{0,0}, {0,1024}, {-1,-1}}}, - - /* - * This card has 2M or less. On a 1M card, the first 2M of the card's - * memory will have even doublewords backed by physical memory and odd - * doublewords unbacked. - * - * Pixels 0 and 1 of a row will be in the zeroth doubleword, while pixels 2 - * and 3 will be in the first. Check both pixels 2 and 3 in case this is a - * pseudo-1M card (one chip pulled to turn a 2M card into a 1M card). - * - * <Mark_Weaver@brown.edu>: - * I don't have a 1M card, so I'm taking a stab in the dark. Maybe memory - * wraps every 512 lines, or maybe odd doublewords are aliases of their - * even doubleword counterparts. I try everything here. - */ - {2048, MEM_SIZE_2M, {{0,0}, {0,512}, {2,0}, {3,0}, {-1,-1}}}, - - /* - * This is a either a 1M card or a 512k card. Test pixel 1, since it is an - * odd word in an even doubleword. - * - * <Mark_Weaver@brown.edu>: - * This is the same idea as the test above. - */ - {1024, MEM_SIZE_1M, {{0,0}, {0,256}, {1,0}, {-1,-1}}}, - - /* - * Assume it is a 512k card by default, since that is the minimum - * configuration. - */ - {512, MEM_SIZE_512K, {{-1,-1}}} -}; - -/* - * ATIMach32ReadPixel -- - * - * Return the colour of the specified screen location. Called from - * ATIMach32videoRam function below. - */ -static Colour -ATIMach32ReadPixel -( - const short int X, - const short int Y -) -{ - Colour Pixel_Colour; - - /* Wait for idle engine */ - ProbeWaitIdleEmpty(); - - /* Set up engine for pixel read */ - ATIWaitQueue(7); - outw(RD_MASK, (CARD16)(~0)); - outw(DP_CONFIG, FG_COLOR_SRC_BLIT | DATA_WIDTH | DRAW | DATA_ORDER); - outw(CUR_X, X); - outw(CUR_Y, Y); - outw(DEST_X_START, X); - outw(DEST_X_END, X + 1); - outw(DEST_Y_END, Y + 1); - - /* Wait for data to become ready */ - ATIWaitQueue(16); - WaitDataReady(); - - /* Read pixel colour */ - Pixel_Colour = inw(PIX_TRANS); - ProbeWaitIdleEmpty(); - return Pixel_Colour; -} - -/* - * ATIMach32WritePixel -- - * - * Set the colour of the specified screen location. Called from - * ATIMach32videoRam function below. - */ -static void -ATIMach32WritePixel -( - const short int X, - const short int Y, - const Colour Pixel_Colour -) -{ - /* Set up engine for pixel write */ - ATIWaitQueue(9); - outw(WRT_MASK, (CARD16)(~0)); - outw(DP_CONFIG, FG_COLOR_SRC_FG | DRAW | READ_WRITE); - outw(ALU_FG_FN, MIX_FN_PAINT); - outw(FRGD_COLOR, Pixel_Colour); - outw(CUR_X, X); - outw(CUR_Y, Y); - outw(DEST_X_START, X); - outw(DEST_X_END, X + 1); - outw(DEST_Y_END, Y + 1); -} - -/* - * ATIMach32videoRam -- - * - * Determine the amount of video memory installed on an 68800-6 based adapter. - * This is done because these chips exhibit a bug that causes their - * MISC_OPTIONS register to report 1M rather than the true amount of memory. - * - * This function is adapted from a similar function in mach32mem.c written by - * Robert Wolff, David Dawes and Mark Weaver. - */ -static int -ATIMach32videoRam -( - void -) -{ - CARD16 clock_sel, mem_bndry, misc_options, ext_ge_config; - Colour saved_Pixel[NumberOf(Test_Pixel)]; - unsigned int Case_Number, Pixel_Number; - Bool AllPixelsOK; - - /* Save register values to be modified */ - clock_sel = inw(CLOCK_SEL); - mem_bndry = inw(MEM_BNDRY); - misc_options = inw(MISC_OPTIONS) & ~MEM_SIZE_ALIAS; - ext_ge_config = inw(R_EXT_GE_CONFIG); - - /* Wait for enough FIFO entries */ - ATIWaitQueue(7); - - /* Enable accelerator */ - outw(CLOCK_SEL, clock_sel | DISABPASSTHRU); - - /* Make accelerator and VGA share video memory */ - outw(MEM_BNDRY, mem_bndry & ~(MEM_PAGE_BNDRY | MEM_BNDRY_ENA)); - - /* Prevent video memory wrap */ - outw(MISC_OPTIONS, misc_options | MEM_SIZE_4M); - - /* - * Set up the drawing engine for a pitch of 1024 at 16 bits per pixel. No - * need to mess with the CRT because the results of this test are not - * intended to be seen. - */ - outw(EXT_GE_CONFIG, PIXEL_WIDTH_16 | ORDER_16BPP_565 | MONITOR_8514 | - ALIAS_ENA); - outw(GE_PITCH, 1024 >> 3); - outw(GE_OFFSET_HI, 0); - outw(GE_OFFSET_LO, 0); - - for (Case_Number = 0; - Case_Number < (NumberOf(Test_Case) - 1); - Case_Number++) - { - /* Reduce redundancy as per Mark_Weaver@brown.edu */ -# define TestPixel Test_Case[Case_Number].Coordinates[Pixel_Number] -# define ForEachTestPixel \ - for (Pixel_Number = 0; TestPixel.x >= 0; Pixel_Number++) - - /* Save pixel colours that will be clobbered */ - ForEachTestPixel - saved_Pixel[Pixel_Number] = - ATIMach32ReadPixel(TestPixel.x, TestPixel.y); - - /* Write test patterns */ - ForEachTestPixel - ATIMach32WritePixel(TestPixel.x, TestPixel.y, - Test_Pixel[Pixel_Number]); - - /* Test for lost pixels */ - AllPixelsOK = TRUE; - ForEachTestPixel - { - if (ATIMach32ReadPixel(TestPixel.x, TestPixel.y) != - Test_Pixel[Pixel_Number]) - { - AllPixelsOK = FALSE; - break; - } - } - - /* Restore clobbered pixels */ - ForEachTestPixel - ATIMach32WritePixel(TestPixel.x, TestPixel.y, - saved_Pixel[Pixel_Number]); - - /* End test on success */ - if (AllPixelsOK) - break; - - /* Completeness */ -# undef ForEachTestPixel -# undef TestPixel - } - - /* Restore what was changed and correct MISC_OPTIONS register */ - ATIWaitQueue(4); - outw(EXT_GE_CONFIG, ext_ge_config); - misc_options |= Test_Case[Case_Number].Miscellaneous_Options_Setting; - outw(MISC_OPTIONS, misc_options); - outw(MEM_BNDRY, mem_bndry); - outw(CLOCK_SEL, clock_sel); - - /* Wait for activity to die down */ - ProbeWaitIdleEmpty(); - - /* Tell ATIPreInit the REAL story */ - return Test_Case[Case_Number].videoRamSize; -} - -#endif /* AVOID_CPIO */ - -/* - * ATIReportMemory -- - * - * This function reports on the amount and type of video memory found. - */ -static void -ATIReportMemory -( - ScrnInfoPtr pScreenInfo, - ATIPtr pATI, - const char *MemoryTypeName -) -{ - char Buffer[128], *Message; - - Message = Buffer + - snprintf(Buffer, SizeOf(Buffer), "%d kB of %s detected", - pATI->VideoRAM, MemoryTypeName); - -#ifndef AVOID_CPIO - - if (pATI->depth == 1) - { - /* 1bpp only uses one plane of four */ - pScreenInfo->videoRam /= 4; - Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message, - " (using %d kB)", pScreenInfo->videoRam); - } - else - -#endif /* AVOID_CPIO */ - - if (pATI->VideoRAM > pScreenInfo->videoRam) - { - Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message, - " (using %d kB)", pScreenInfo->videoRam); - } - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, "%s.\n", Buffer); -} - -static const int videoRamSizes[] = - {0, 256, 512, 1024, 2*1024, 4*1024, 6*1024, 8*1024, 12*1024, 16*1024, 0}; -static const rgb defaultWeight = {0, 0, 0}; -static const Gamma defaultGamma = {0.0, 0.0, 0.0}; - -/* - * ATIMach64Map -- - * - * This function attempts to mmap() a Mach64's MMIO aperture. - */ -static void -ATIMach64Map -( - int iScreen, - ATIPtr pATI -) -{ - (void)ATIMapApertures(iScreen, pATI); - if (!pATI->pBlock[0] || - (pATI->config_chip_id != inr(CONFIG_CHIP_ID))) - ATIUnmapApertures(iScreen, pATI); -} - -/* - * ATIPrintNoiseIfRequested -- - * - * This function formats debugging information on the server's stderr when - * requested by the user through the server's verbosity setting. - */ -static void -ATIPrintNoiseIfRequested -( - ATIPtr pATI, - CARD8 *BIOS, - unsigned int BIOSSize -) -{ - if (xf86GetVerbosity() <= 3) - return; - - if (BIOSSize > 0) - ATIPrintBIOS(BIOS, BIOSSize); - xf86ErrorFVerb(4, "\n On server entry:\n"); - ATIPrintRegisters(pATI); -} - -/* - * ATIPreInit -- - * - * This function is only called once per screen at the start of the first - * server generation. - */ -Bool -ATIPreInit -( - ScrnInfoPtr pScreenInfo, - int flags -) -{ -# define BIOS_SIZE 0x00010000U /* 64kB */ - CARD8 BIOS[BIOS_SIZE]; -# define BIOSByte(_n) ((CARD8)(BIOS[_n])) -# define BIOSWord(_n) ((CARD16)(BIOS[_n] | \ - (BIOS[(_n) + 1] << 8))) -# define BIOSLong(_n) ((CARD32)(BIOS[_n] | \ - (BIOS[(_n) + 1] << 8) | \ - (BIOS[(_n) + 2] << 16) | \ - (BIOS[(_n) + 3] << 24))) - unsigned int BIOSSize = 0; - unsigned int ROMTable = 0, ClockTable = 0, FrequencyTable = 0; - unsigned int LCDTable = 0, LCDPanelInfo = 0, VideoTable = 0; - unsigned int HardwareTable = 0; - - char Buffer[128], *Message; - ATIPtr pATI; - GDevPtr pGDev; - EntityInfoPtr pEntity; - resPtr pResources; - pciVideoPtr pVideo; - DisplayModePtr pMode; - unsigned long Block0Base; - CARD32 IOValue; - int i, j, AcceleratorVideoRAM = 0, ServerVideoRAM; - int Numerator, Denominator; - int MinX, MinY; - ClockRange ATIClockRange = {NULL, 0, 80000, 0, TRUE, TRUE, 1, 1, 0}; - int DefaultmaxClock = 0; - int minPitch, maxPitch = 0xFFU, maxHeight = 0; - int ApertureSize = 0x00010000U; - int ModeType = M_T_BUILTIN; - LookupModeFlags Strategy = LOOKUP_CLOSEST_CLOCK; - int DefaultDepth; - -# define pATIHW (&pATI->OldHW) - -#ifndef AVOID_CPIO - - xf86Int10InfoPtr pInt10Info = NULL; - vbeInfoPtr pVBE; - pointer pInt10Module, pDDCModule = NULL, pVBEModule = NULL; - int VGAVideoRAM = 0; - resRange Resources[2] = {{0, 0, 0}, _END}; - -#endif /* AVOID_CPIO */ - - if (pScreenInfo->numEntities != 1) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Logic error: Number of attached entities not 1.\n"); - return FALSE; - } - - pATI = ATIPTR(pScreenInfo); - - if (pATI->iEntity != pScreenInfo->entityList[0]) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Logic error: Entity mismatch.\n"); - return FALSE; - } - - /* Register resources */ - pEntity = xf86GetEntityInfo(pATI->iEntity); - pGDev = pEntity->device; - pResources = pEntity->resources; - xfree(pEntity); - if (!pResources) - pResources = xf86RegisterResources(pATI->iEntity, NULL, - pATI->SharedAccelerator ? ResShared : ResExclusive); - if (pResources) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Unable to register the following bus resources:\n"); - xf86PrintResList(0, pResources); - xf86FreeResList(pResources); - return FALSE; - } - - ConfiguredMonitor = NULL; - (void)memset(BIOS, 0, SizeOf(BIOS)); - - if (!(flags & PROBE_DETECT)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, - pATI->Chipset ? X_CONFIG : X_DEFAULT, - "Chipset: \"%s\".\n", ATIChipsetNames[pATI->Chipset]); - - /* Promote chipset specification */ - switch (pATI->Chipset) - { - -#ifndef AVOID_CPIO - - case ATI_CHIPSET_IBMVGA: - if (pATI->Adapter == ATI_ADAPTER_VGA) - break; /* XXX */ - /* Fall through */ - - case ATI_CHIPSET_VGAWONDER: - pATI->Chipset = ATI_CHIPSET_ATIVGA; - break; - - case ATI_CHIPSET_IBM8514: - if (pATI->Adapter == ATI_ADAPTER_8514A) - break; /* XXX */ - /* Fall through */ - - case ATI_CHIPSET_MACH8: - case ATI_CHIPSET_MACH32: - -#endif /* AVOID_CPIO */ - - case ATI_CHIPSET_MACH64: - case ATI_CHIPSET_RAGE128: - case ATI_CHIPSET_RADEON: - pATI->Chipset = ATI_CHIPSET_ATI; - break; - - default: - break; - } - - /* Set monitor */ - pScreenInfo->monitor = pScreenInfo->confScreen->monitor; - - /* Set depth, bpp, etc. */ - if ((pATI->Chipset != ATI_CHIPSET_ATI) || - (pATI->Chip < ATI_CHIP_264CT)) - { - i = NoDepth24Support; /* No support for >8bpp either */ - DefaultDepth = 8; - } - else - { - i = Support24bppFb | Support32bppFb; - DefaultDepth = 0; - } - - if (!xf86SetDepthBpp(pScreenInfo, DefaultDepth, 0, 0, i)) - return FALSE; - - for (j = 0; ; j++) - { - static const CARD8 AllowedDepthBpp[][2] = - { - -#ifndef AVOID_CPIO - - { 1, 1}, - { 4, 4}, - { 4, 8}, - -#endif /* AVOID_CPIO */ - - { 8, 8}, - {15, 16}, - {16, 16}, - {24, 24}, - {24, 32} - }; - - if (j < NumberOf(AllowedDepthBpp)) - { - if (pScreenInfo->depth > AllowedDepthBpp[j][0]) - continue; - - if (pScreenInfo->depth == AllowedDepthBpp[j][0]) - { - if (pScreenInfo->bitsPerPixel > AllowedDepthBpp[j][1]) - continue; - - if (pScreenInfo->bitsPerPixel == AllowedDepthBpp[j][1]) - break; - } - } - - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Driver does not support depth %d at fbbpp %d.\n", - pScreenInfo->depth, pScreenInfo->bitsPerPixel); - return FALSE; - } - - xf86PrintDepthBpp(pScreenInfo); - - if ((i == NoDepth24Support) && (pScreenInfo->depth > 8)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Depth %d is not supported through this adapter.\n", - pScreenInfo->depth); - return FALSE; - } - - /* Pick up XF86Config options */ - ATIProcessOptions(pScreenInfo, pATI); - } - -#ifdef AVOID_CPIO - - else /* if (flags & PROBE_DETECT) */ - { - return TRUE; - } - -#else /* AVOID_CPIO */ - - /* - * If there is an ix86-style BIOS, ensure its initialisation entry point - * has been executed, and retrieve DDC and VBE information from it. - */ - if (!(pInt10Module = ATILoadModule(pScreenInfo, "int10", ATIint10Symbols))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to load int10 module.\n"); - } - else if (!(pInt10Info = xf86InitInt10(pATI->iEntity))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to initialise int10 interface.\n"); - } - else - { - if (!(pDDCModule = ATILoadModule(pScreenInfo, "ddc", ATIddcSymbols))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to load ddc module.\n"); - } - else - if (!(pVBEModule = ATILoadModule(pScreenInfo, "vbe", ATIvbeSymbols))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to load vbe module.\n"); - } - else - { - if ((pVBE = VBEInit(pInt10Info, pATI->iEntity))) - { - ConfiguredMonitor = vbeDoEDID(pVBE, pDDCModule); - vbeFree(pVBE); - } - xf86UnloadSubModule(pVBEModule); - } - - if (!(flags & PROBE_DETECT)) - { - /* Validate, then make a private copy of, the initialised BIOS */ - CARD8 *pBIOS = xf86int10Addr(pInt10Info, pInt10Info->BIOSseg << 4); - - if ((pBIOS[0] != 0x55U) || (pBIOS[1] != 0xAAU) || !pBIOS[2]) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to correctly retrieve adapter BIOS.\n"); - } - else - { - BIOSSize = pBIOS[2] << 9; - if (BIOSSize > BIOS_SIZE) - BIOSSize = BIOS_SIZE; - (void)memcpy(BIOS, pBIOS, BIOSSize); - } - } - } - - /* De-activate int10 */ - xf86FreeInt10(pInt10Info); - xf86UnloadSubModule(pInt10Module); - - if (flags & PROBE_DETECT) - { - xf86UnloadSubModule(pDDCModule); - return TRUE; - } - - if (ConfiguredMonitor) - { - xf86PrintEDID(ConfiguredMonitor); - xf86SetDDCproperties(pScreenInfo, ConfiguredMonitor); - } - - /* DDC module is no longer needed at this point */ - xf86UnloadSubModule(pDDCModule); - -#endif /* AVOID_CPIO */ - - pATI->Block0Base = 0; /* Might no longer be valid */ - if ((pVideo = pATI->PCIInfo)) - { - if (pATI->CPIODecoding == BLOCK_IO) - pATI->CPIOBase = pVideo->ioBase[1]; - - /* Set MMIO address from PCI configuration space, if available */ - if ((pATI->Block0Base = pVideo->memBase[2])) - { - if (pATI->Block0Base >= (CARD32)(-1 << pVideo->size[2])) - pATI->Block0Base = 0; - else - pATI->Block0Base += 0x0400U; - } - } - -#ifdef AVOID_CPIO - - pScreenInfo->racMemFlags = - RAC_FB | RAC_COLORMAP | RAC_VIEWPORT | RAC_CURSOR; - -#else /* AVOID_CPIO */ - - pScreenInfo->racIoFlags = - RAC_FB | RAC_COLORMAP | RAC_VIEWPORT | RAC_CURSOR; - pScreenInfo->racMemFlags = RAC_FB | RAC_CURSOR; - -#endif /* AVOID_CPIO */ - - /* Deal with ChipID & ChipRev overrides */ - if (pGDev->chipID >= 0) - { - ATIChipType Chip; - - Chip = ATIChipID(pGDev->chipID, - (pGDev->chipRev < 0) ? pATI->ChipRev : pGDev->chipRev); - if (Chip != pATI->Chip) - { - pATI->Chip = Chip; - pATI->ChipType = pGDev->chipID; - if (pGDev->chipRev < 0) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_CONFIG, - "Driver messages reflect ChipID 0x%04X override.\n", - pATI->ChipType); - } - else - { - pATI->ChipRev = pGDev->chipRev; - pATI->ChipVersion = GetBits(pATI->ChipRev, - GetBits(CFG_CHIP_VERSION, CFG_CHIP_REV)); - pATI->ChipFoundry = GetBits(pATI->ChipRev, - GetBits(CFG_CHIP_FOUNDRY, CFG_CHIP_REV)); - pATI->ChipRevision = GetBits(pATI->ChipRev, - GetBits(CFG_CHIP_REVISION, CFG_CHIP_REV)); - xf86DrvMsg(pScreenInfo->scrnIndex, X_CONFIG, - "Driver messages reflect ChipID 0x%04X and ChipRev 0x%02X" - " overrides.\n", pATI->ChipType, pATI->ChipRev); - } - } - } - - /* Finish private area initialisation */ - pATI->DAC = ATI_DAC_GENERIC; - -#ifndef AVOID_CPIO - - pATI->NewHW.SetBank = ATIx8800SetBank; - pATI->BankInfo.SetSourceBank = ATIx8800SetRead; - pATI->BankInfo.SetDestinationBank = ATIx8800SetWrite; - pATI->BankInfo.SetSourceAndDestinationBanks = ATIx8800SetReadWrite; - pATI->BankInfo.BankSize = 0x00010000U; /* 64kB */ - -#endif /* AVOID_CPIO */ - - pATI->LCDPanelID = -1; - pATI->nFIFOEntries = 16; /* For now */ - pATI->Audio = ATI_AUDIO_NONE; - - /* Finish probing the adapter */ - switch (pATI->Adapter) - { - -#ifndef AVOID_CPIO - - case ATI_ADAPTER_NONE: - case ATI_ADAPTER_EGA: - case ATI_ADAPTER_EGA_PLUS: - case ATI_ADAPTER_VGA: - case ATI_ADAPTER_BASIC: - pATI->NewHW.SetBank = (ATIBankProcPtr)NoopDDA; - pATI->BankInfo.SetSourceBank = - pATI->BankInfo.SetDestinationBank = - pATI->BankInfo.SetSourceAndDestinationBanks = - (miBankProcPtr)NoopDDA; - break; - - case ATI_ADAPTER_V3: - pATI->NewHW.SetBank = ATIV3SetBank; - pATI->BankInfo.SetSourceBank = ATIV3SetRead; - pATI->BankInfo.SetDestinationBank = ATIV3SetWrite; - pATI->BankInfo.SetSourceAndDestinationBanks = ATIV3SetReadWrite; - break; - - case ATI_ADAPTER_V4: - case ATI_ADAPTER_V5: - pATI->NewHW.SetBank = ATIV4V5SetBank; - pATI->BankInfo.SetSourceBank = ATIV4V5SetRead; - pATI->BankInfo.SetDestinationBank = ATIV4V5SetWrite; - pATI->BankInfo.SetSourceAndDestinationBanks = ATIV4V5SetReadWrite; - break; - - case ATI_ADAPTER_XL: - pATI->DAC = ATI_DAC_SC11483; - break; - - case ATI_ADAPTER_8514A: - pATI->VideoRAM = - videoRamSizes[GetBits(inw(SUBSYS_STAT), _8PLANE) + 2]; - break; - - case ATI_ADAPTER_MACH8: - pATI->VideoRAM = - videoRamSizes[GetBits(inw(CONFIG_STATUS_1), MEM_INSTALLED) + 2]; - break; - - case ATI_ADAPTER_MACH32: - IOValue = inw(CONFIG_STATUS_1); - pATI->DAC = ATI_DAC(GetBits(IOValue, DACTYPE), 0); - pATI->MemoryType = GetBits(IOValue, MEM_TYPE); - - IOValue = inw(MISC_OPTIONS); - pATI->VideoRAM = - videoRamSizes[GetBits(IOValue, MEM_SIZE_ALIAS) + 2]; - - /* - * The 68800-6 doesn't necessarily report the correct video memory - * size. - */ - if ((pATI->Chip == ATI_CHIP_68800_6) && (pATI->VideoRAM == 1024)) - pATI->VideoRAM = ATIMach32videoRam(); - - break; - -#endif /* AVOID_CPIO */ - - case ATI_ADAPTER_MACH64: - do - { - /* - * Find and mmap() MMIO area. Allow only auxiliary aperture if - * it exists. - */ - if (!(Block0Base = pATI->Block0Base)) - { - if (pVideo) - { - /* Check tail end of linear (8MB or 4MB) aperture */ - if ((pATI->Block0Base = pVideo->memBase[0])) - { - pATI->Block0Base += 0x007FFC00U; - ATIMach64Map(pScreenInfo->scrnIndex, pATI); - if (pATI->pBlock[0]) - break; - - pATI->Block0Base -= 0x00400000U; - ATIMach64Map(pScreenInfo->scrnIndex, pATI); - if (pATI->pBlock[0]) - break; - } - } - - /* Check VGA MMIO aperture */ - pATI->Block0Base = 0x000BFC00U; - } - - ATIMach64Map(pScreenInfo->scrnIndex, pATI); - } while (0); - pATI->Block0Base = Block0Base; - -#ifdef AVOID_CPIO - - if (!pATI->pBlock[0]) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Unable to mmap() adapter registers.\n"); - return FALSE; - } - -#endif /* AVOID_CPIO */ - - pATIHW->crtc_gen_cntl = inr(CRTC_GEN_CNTL); - if (!(pATIHW->crtc_gen_cntl & CRTC_EN) && - (pATI->Chip >= ATI_CHIP_264CT)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Adapter has not been initialised.\n"); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - -#ifdef AVOID_CPIO - - if (!(pATIHW->crtc_gen_cntl & CRTC_EXT_DISP_EN)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Adapters found to be in VGA mode on server entry are not" - " supported by the MMIO-only version of this driver.\n"); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - -#endif /* AVOID_CPIO */ - - pATIHW->mem_cntl = inr(MEM_CNTL); - if (pATI->Chip < ATI_CHIP_264VTB) - { - pATI->VideoRAM = - videoRamSizes[GetBits(pATIHW->mem_cntl, CTL_MEM_SIZE) + 2]; - } - else - { - pATI->nFIFOEntries = /* Don't care */ - (unsigned int)(-1) >> 1; - - IOValue = GetBits(pATIHW->mem_cntl, CTL_MEM_SIZEB); - if (IOValue < 8) - pATI->VideoRAM = (IOValue + 1) * 512; - else if (IOValue < 12) - pATI->VideoRAM = (IOValue - 3) * 1024; - else - pATI->VideoRAM = (IOValue - 7) * 2048; - } - - pATI->DAC = GetBits(inr(DAC_CNTL), DAC_TYPE); - - IOValue = inr(CONFIG_STATUS64_0); - if (pATI->Chip >= ATI_CHIP_264CT) - { - pATI->MemoryType = GetBits(IOValue, CFG_MEM_TYPE_T); - - /* Get LCD panel id */ - if (pATI->Chip == ATI_CHIP_264LT) - { - pATI->LCDPanelID = GetBits(IOValue, CFG_PANEL_ID); - - pATIHW->horz_stretching = inr(HORZ_STRETCHING); - pATIHW->vert_stretching = inr(VERT_STRETCHING); - pATIHW->lcd_gen_ctrl = inr(LCD_GEN_CTRL); - } - else if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) - { - pATI->LCDPanelID = GetBits(IOValue, CFG_PANEL_ID); - - pATIHW->lcd_index = inr(LCD_INDEX); - pATIHW->horz_stretching = - ATIMach64GetLCDReg(LCD_HORZ_STRETCHING); - pATI->LCDHorizontal = - GetBits(pATIHW->horz_stretching, HORZ_PANEL_SIZE); - if (pATI->LCDHorizontal) - { - if (pATI->LCDHorizontal == MaxBits(HORZ_PANEL_SIZE)) - pATI->LCDHorizontal = 0; - else - pATI->LCDHorizontal = - (pATI->LCDHorizontal + 1) << 3; - } - pATIHW->ext_vert_stretch = - ATIMach64GetLCDReg(LCD_EXT_VERT_STRETCH); - pATI->LCDVertical = - GetBits(pATIHW->ext_vert_stretch, VERT_PANEL_SIZE); - if (pATI->LCDVertical) - { - if (pATI->LCDVertical == MaxBits(VERT_PANEL_SIZE)) - pATI->LCDVertical = 0; - else - pATI->LCDVertical++; - } - pATIHW->vert_stretching = - ATIMach64GetLCDReg(LCD_VERT_STRETCHING); - pATIHW->lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL); - outr(LCD_INDEX, pATIHW->lcd_index); - } - - /* - * Don't bother with panel support if it hasn't been previously - * enabled. - */ - if ((pATI->LCDPanelID >= 0) && - !(pATIHW->horz_stretching & HORZ_STRETCH_EN) && - !(pATIHW->vert_stretching & VERT_STRETCH_EN) && - !(pATIHW->lcd_gen_ctrl & LCD_ON)) - { - /* - * At this point, if an XL or Mobility BIOS hasn't set - * panel dimensions, then there is no panel. Otherwise, - * keep any panel disabled to allow for modes greater than - * the panel's dimensions. - */ - if ((pATI->Chip >= ATI_CHIP_264XL) && - (!pATI->LCDHorizontal || !pATI->LCDVertical)) - pATI->LCDPanelID = -1; - else - pATI->OptionPanelDisplay = FALSE; - } - } - else - { - pATI->MemoryType = GetBits(IOValue, CFG_MEM_TYPE); - - /* Factor in what the BIOS says the DAC is */ - pATI->DAC = ATI_DAC(pATI->DAC, - GetBits(inr(SCRATCH_REG1), BIOS_INIT_DAC_SUBTYPE)); - } - - /* - * RAMDAC types 0 & 1 for Mach64's are different than those for - * Mach32's. - */ - if (pATI->DAC < ATI_DAC_ATI68875) - pATI->DAC += ATI_DAC_INTERNAL; - - break; - - default: - break; - } - - /* - * For Mach64 adapters, pick up, from the BIOS, the type of programmable - * clock generator (if any), and various information about it. - */ - -#ifndef AVOID_CPIO - - if (pATI->Chip >= ATI_CHIP_88800GXC) - -#endif /* AVOID_CPIO */ - - { - CARD16 ClockDac; - - /* Set up non-zero defaults */ - pATI->ClockDescriptor = ATIClockDescriptors[ATI_CLOCK_FIXED]; - pATI->ClockNumberToProgramme = -1; - - ROMTable = BIOSWord(0x48U); - if ((ROMTable < 0x0002U) || - (BIOSWord(ROMTable - 0x02U) < 0x0012U) || - ((ROMTable + BIOSWord(ROMTable - 0x02U)) > BIOSSize)) - ROMTable = 0; - - if (ROMTable > 0) - { - ClockTable = BIOSWord(ROMTable + 0x10U); - if ((ClockTable + 0x20U) > BIOSSize) - ClockTable = 0; - - if (BIOSWord(ROMTable - 0x02U) >= 0x0048U) - { - VideoTable = BIOSWord(ROMTable + 0x46U); - if ((VideoTable < 0x08U) || - (BIOSByte(VideoTable - 0x01U) < 0x08U) || - (BIOSByte(VideoTable - 0x02U) > 0x01U) || - ((VideoTable + BIOSByte(VideoTable - 0x01U)) > BIOSSize)) - VideoTable = 0; - } - - if (BIOSWord(ROMTable - 0x02U) >= 0x004AU) - { - HardwareTable = BIOSWord(ROMTable + 0x48U); - if (((HardwareTable + 0x08U) <= BIOSSize) && - !memcmp(BIOS + HardwareTable, "$ATI", 4)) - pATI->I2CType = BIOSByte(HardwareTable + 0x06U) & 0x0FU; - else - HardwareTable = 0; - } - } - - if (ClockTable > 0) - { - FrequencyTable = BIOSWord(ClockTable - 0x02U); - if ((FrequencyTable > 0) && - ((FrequencyTable + 0x20U) <= BIOSSize)) - { - for (i = 0; i < 16; i++) - { - pATI->BIOSClocks[i] = BIOSWord(FrequencyTable); - FrequencyTable += 2; - } - } - pATI->ProgrammableClock = BIOSByte(ClockTable); - pATI->ClockNumberToProgramme = BIOSByte(ClockTable + 0x06U); - switch (BIOSWord(ClockTable + 0x08U) / 10) - { - case 143: - pATI->ReferenceNumerator = 157500; - pATI->ReferenceDenominator = 11; - break; - - case 286: - pATI->ReferenceNumerator = 315000; - pATI->ReferenceDenominator = 11; - break; - - default: - pATI->ReferenceNumerator = - BIOSWord(ClockTable + 0x08U) * 10; - pATI->ReferenceDenominator = 1; - break; - } - } - else - { - /* - * Compensate for BIOS absence. Note that the reference - * frequency has already been set by option processing. - */ - if ((pATI->DAC & ~0x0FU) == ATI_DAC_INTERNAL) - { - pATI->ProgrammableClock = ATI_CLOCK_INTERNAL; - } - else switch (pATI->DAC) - { - case ATI_DAC_STG1703: - pATI->ProgrammableClock = ATI_CLOCK_STG1703; - break; - - case ATI_DAC_CH8398: - pATI->ProgrammableClock = ATI_CLOCK_CH8398; - break; - - case ATI_DAC_ATT20C408: - pATI->ProgrammableClock = ATI_CLOCK_ATT20C408; - break; - - case ATI_DAC_IBMRGB514: - pATI->ProgrammableClock = ATI_CLOCK_IBMRGB514; - break; - - default: /* Provisional */ - pATI->ProgrammableClock = ATI_CLOCK_ICS2595; - break; - } - - /* This should be safe for all generators except IBM's RGB514 */ - pATI->ClockNumberToProgramme = 3; - } - - if ((pATI->ProgrammableClock > ATI_CLOCK_FIXED) && - (pATI->ProgrammableClock < ATI_CLOCK_MAX)) - { - /* - * Graphics PRO TURBO 1600's are unusual in that an ICS2595 is used - * to generate clocks for VGA modes, and an IBM RGB514 is used for - * accelerator modes. - */ - if ((pATI->ProgrammableClock == ATI_CLOCK_ICS2595) && - (pATI->DAC == ATI_DAC_IBMRGB514) && - (pScreenInfo->depth >= 8) && - (pATI->Chipset == ATI_CHIPSET_ATI)) - pATI->ProgrammableClock = ATI_CLOCK_IBMRGB514; - - pATI->ClockDescriptor = - ATIClockDescriptors[pATI->ProgrammableClock]; - } - - ClockDac = pATI->DAC; - switch (pATI->ProgrammableClock) - { - case ATI_CLOCK_ICS2595: - /* - * Pick up reference divider (43 or 46) appropriate to the chip - * revision level. - */ - if (ClockTable > 0) - pATI->ClockDescriptor.MinM = - pATI->ClockDescriptor.MaxM = - BIOSWord(ClockTable + 0x0AU); - else if (!xf86NameCmp(pGDev->clockchip, "ATI 18818-0")) - pATI->ClockDescriptor.MinM = - pATI->ClockDescriptor.MaxM = 43; - else if (!xf86NameCmp(pGDev->clockchip, "ATI 18818-1")) - pATI->ClockDescriptor.MinM = - pATI->ClockDescriptor.MaxM = 46; - else - pATI->ProgrammableClock = ATI_CLOCK_UNKNOWN; - break; - - case ATI_CLOCK_STG1703: - /* This one's also a RAMDAC */ - ClockDac = ATI_DAC_STG1703; - break; - - case ATI_CLOCK_CH8398: - /* This one's also a RAMDAC */ - ClockDac = ATI_DAC_CH8398; - break; - - case ATI_CLOCK_INTERNAL: - /* - * The reference divider has already been programmed by BIOS - * initialisation. Because, there is only one reference - * divider for all generated frequencies (including MCLK), it - * cannot be changed without reprogramming all clocks every - * time one of them needs a different reference divider. - * - * Besides, it's not a good idea to change the reference - * divider. BIOS initialisation sets it to a value that - * effectively prevents generating frequencies beyond the - * graphics controller's tolerance. - */ - pATI->ClockDescriptor.MinM = pATI->ClockDescriptor.MaxM = - ATIMach64GetPLLReg(PLL_REF_DIV); - - /* The DAC is also integrated */ - if ((pATI->DAC & ~0x0FU) != ATI_DAC_INTERNAL) - ClockDac = ATI_DAC_INTERNAL; - - break; - - case ATI_CLOCK_ATT20C408: - /* This one's also a RAMDAC */ - ClockDac = ATI_DAC_ATT20C408; - break; - - case ATI_CLOCK_IBMRGB514: - /* This one's also a RAMDAC */ - ClockDac = ATI_DAC_IBMRGB514; - pATI->ClockNumberToProgramme = 7; - break; - - default: - break; - } - - /* - * We now have up to two indications of what RAMDAC the adapter uses. - * They should be the same. The following test and corresponding - * action are under construction. - */ - if (pATI->DAC != ClockDac) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Mach64 RAMDAC probe discrepancy detected:\n" - " DAC=0x%02X; ClockDac=0x%02X.\n", - pATI->DAC, ClockDac); - - if (pATI->DAC == ATI_DAC_IBMRGB514) - { - pATI->ProgrammableClock = ATI_CLOCK_IBMRGB514; - pATI->ClockDescriptor = - ATIClockDescriptors[ATI_CLOCK_IBMRGB514]; - pATI->ClockNumberToProgramme = 7; - } - else - { - pATI->DAC = ClockDac; /* For now */ - } - } - - /* - * Pick up multimedia information, which will be at different - * displacements depending on table revision. - */ - if (VideoTable > 0) - { - switch (BIOSByte(VideoTable - 0x02U)) - { - case 0x00U: - pATI->Tuner = BIOSByte(VideoTable) & 0x1FU; - - /* - * XXX The VideoTable[1] byte is known to have been - * omitted in LTPro and Mobility BIOS'es. Any others? - */ - switch (pATI->Chip) - { - case ATI_CHIP_264LTPRO: - case ATI_CHIP_MOBILITY: - pATI->Decoder = - BIOSByte(VideoTable + 0x01U) & 0x07U; - pATI->Audio = - BIOSByte(VideoTable + 0x02U) & 0x0FU; - break; - - default: - pATI->Decoder = - BIOSByte(VideoTable + 0x02U) & 0x07U; - pATI->Audio = - BIOSByte(VideoTable + 0x03U) & 0x0FU; - break; - } - - break; - - case 0x01U: - pATI->Tuner = BIOSByte(VideoTable) & 0x1FU; - pATI->Audio = BIOSByte(VideoTable + 0x01U) & 0x0FU; - pATI->Decoder = BIOSByte(VideoTable + 0x05U) & 0x0FU; - break; - - default: - break; - } - } - - /* Determine panel dimensions */ - if (pATI->LCDPanelID >= 0) - { - LCDTable = BIOSWord(0x78U); - if ((LCDTable + BIOSByte(LCDTable + 5)) > BIOSSize) - LCDTable = 0; - - if (LCDTable > 0) - { - LCDPanelInfo = BIOSWord(LCDTable + 0x0AU); - if (((LCDPanelInfo + 0x1DU) > BIOSSize) || - ((BIOSByte(LCDPanelInfo) != pATI->LCDPanelID) && - (pATI->LCDPanelID || (BIOSByte(LCDPanelInfo) > 0x1FU) || - (pATI->Chip <= ATI_CHIP_264LTPRO)))) - LCDPanelInfo = 0; - } - - if (!LCDPanelInfo) - { - /* - * Scan BIOS for panel info table. - */ - for (i = 0; i <= (int)(BIOSSize - 0x1DU); i++) - { - /* Look for panel ID ... */ - if ((BIOSByte(i) != pATI->LCDPanelID) && - (pATI->LCDPanelID || (BIOSByte(i) > 0x1FU) || - (pATI->Chip <= ATI_CHIP_264LTPRO))) - continue; - - /* ... followed by 24-byte panel model name ... */ - for (j = 0; j < 24; j++) - { - if ((CARD8)(BIOSByte(i + j + 1) - 0x20U) > 0x5FU) - { - i += j; - goto NextBIOSByte; - } - } - - /* ... verify panel width ... */ - if (pATI->LCDHorizontal && - (pATI->LCDHorizontal != BIOSWord(i + 0x19U))) - continue; - - /* ... and verify panel height */ - if (pATI->LCDVertical && - (pATI->LCDVertical != BIOSWord(i + 0x1BU))) - continue; - - if (LCDPanelInfo) - { - /* - * More than one possibility, but don't care if all - * tables describe panels of the same size. - */ - if ((BIOSByte(LCDPanelInfo + 0x19U) == - BIOSByte(i + 0x19U)) && - (BIOSByte(LCDPanelInfo + 0x1AU) == - BIOSByte(i + 0x1AU)) && - (BIOSByte(LCDPanelInfo + 0x1BU) == - BIOSByte(i + 0x1BU)) && - (BIOSByte(LCDPanelInfo + 0x1CU) == - BIOSByte(i + 0x1CU))) - continue; - - LCDPanelInfo = 0; - break; - } - - LCDPanelInfo = i; - - NextBIOSByte: ; - } - } - - if (LCDPanelInfo > 0) - { - pATI->LCDPanelID = BIOSByte(LCDPanelInfo); - pATI->LCDHorizontal = BIOSWord(LCDPanelInfo + 0x19U); - pATI->LCDVertical = BIOSWord(LCDPanelInfo + 0x1BU); - } - } - - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3, - "BIOS Data: BIOSSize=0x%04X, ROMTable=0x%04X.\n", - BIOSSize, ROMTable); - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3, - "BIOS Data: ClockTable=0x%04X, FrequencyTable=0x%04X.\n", - ClockTable, FrequencyTable); - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3, - "BIOS Data: LCDTable=0x%04X, LCDPanelInfo=0x%04X.\n", - LCDTable, LCDPanelInfo); - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3, - "BIOS Data: VideoTable=0x%04X, HardwareTable=0x%04X.\n", - VideoTable, HardwareTable); - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_INFO, 3, - "BIOS Data: I2CType=0x%02X, Tuner=0x%02X, Decoder=0x%02X," - " Audio=0x%02X.\n", - pATI->I2CType, pATI->Tuner, pATI->Decoder, pATI->Audio); - } - - ATIUnlock(pATI); /* Unlock registers */ - -#ifndef AVOID_CPIO - - /* Sometimes, the BIOS lies about the chip */ - if ((pATI->Chip >= ATI_CHIP_28800_4) && (pATI->Chip <= ATI_CHIP_28800_6)) - { - IOValue = GetBits(ATIGetExtReg(0xAAU), 0x0FU) + - (ATI_CHIP_28800_4 - 4); - if ((IOValue <= ATI_CHIP_28800_6) && (IOValue > pATI->Chip)) - pATI->Chip = IOValue; - } - -#endif /* AVOID_CPIO */ - - /* Report what was found */ - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%s graphics controller detected.\n", ATIChipNames[pATI->Chip]); - -#ifndef AVOID_CPIO - - if ((pATI->Chip >= ATI_CHIP_68800) && (pATI->Chip != ATI_CHIP_68800_3)) - -#endif /* AVOID_CPIO */ - - { - Message = Buffer + snprintf(Buffer, SizeOf(Buffer), "Chip type %04X", - pATI->ChipType); - if (!(pATI->ChipType & ~(CHIP_CODE_0 | CHIP_CODE_1))) - Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message, - " (%c%c)", - GetBits(pATI->ChipType, CHIP_CODE_1) + 0x41U, - GetBits(pATI->ChipType, CHIP_CODE_0) + 0x41U); - else if ((pATI->ChipType & 0x4040U) == 0x4040U) - Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message, - " \"%c%c\"", - GetByte(pATI->ChipType, 1), GetByte(pATI->ChipType, 0)); - if ((pATI->Chip >= ATI_CHIP_264CT) && (pATI->Chip != ATI_CHIP_Mach64)) - Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message, - ", version %d, foundry %s", - pATI->ChipVersion, ATIFoundryNames[pATI->ChipFoundry]); - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%s, class %d, revision 0x%02X.\n", - Buffer, pATI->ChipClass, pATI->ChipRevision); - } - -#ifndef AVOID_CPIO - - if (pATI->Adapter >= ATI_ADAPTER_MACH8) - -#endif /* AVOID_CPIO */ - - { - Message = Buffer + snprintf(Buffer, SizeOf(Buffer), - "%s bus interface detected", ATIBusNames[pATI->BusType]); - -#ifndef AVOID_CPIO - - if (pATI->Adapter >= ATI_ADAPTER_MACH64) - { - Message += snprintf(Message, Buffer + SizeOf(Buffer) - Message, - "; %s I/O base is 0x%04lX", - (pATI->CPIODecoding == SPARSE_IO) ? "sparse" : "block", - pATI->CPIOBase); - } - -#endif /* AVOID_CPIO */ - - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, "%s.\n", Buffer); - } - -#ifndef AVOID_CPIO - - if (pATI->CPIO_VGAWonder) - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "VGA Wonder registers at I/O port 0x%04X.\n", - pATI->CPIO_VGAWonder); - - if (pATI->Coprocessor != ATI_CHIP_NONE) - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%s graphics accelerator detected,\n with %d kB of coprocessor" - " memory.\n", - ATIChipNames[pATI->Coprocessor], pATI->VideoRAM); - -#endif /* AVOID_CPIO */ - - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%s adapter detected.\n", ATIAdapterNames[pATI->Adapter]); - - if (pATI->Chip >= ATI_CHIP_264GT) - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "For information on using the multimedia capabilities\n of this" - " adapter, please see http://gatos.sf.net.\n"); - - if ((pATI->DAC & ~0x0FU) == ATI_DAC_INTERNAL) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "Internal RAMDAC (subtype %d) detected.\n", pATI->DAC & 0x0FU); - } - else - { - const SymTabRec *DAC; - - for (DAC = ATIDACDescriptors; ; DAC++) - { - if (pATI->DAC == DAC->token) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%s RAMDAC detected.\n", DAC->name); - break; - } - - if (pATI->DAC < DAC->token) - { - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_WARNING, 0, - "Unknown RAMDAC type 0x%02X detected.\n", pATI->DAC); - break; - } - } - } - -#ifdef AVOID_CPIO - - if (!xf86LinearVidMem()) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "A linear aperture is not available.\n"); - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - -#endif /* AVOID_CPIO */ - - /* - * Set colour weights. - */ - - if (pATI->Chip < ATI_CHIP_264CT) - pScreenInfo->rgbBits = 6; - else - pScreenInfo->rgbBits = 8; - pATI->rgbBits = pScreenInfo->rgbBits; - if (!xf86SetWeight(pScreenInfo, defaultWeight, defaultWeight)) - { - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - if ((pScreenInfo->depth > 8) && - ((pScreenInfo->weight.red != pScreenInfo->weight.blue) || - (pScreenInfo->weight.red != (CARD32)(pScreenInfo->depth / 3)) || - ((CARD32)pScreenInfo->depth != (pScreenInfo->weight.red + - pScreenInfo->weight.green + - pScreenInfo->weight.blue)))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Driver does not support weight %d%d%d for depth %d.\n", - pScreenInfo->weight.red, pScreenInfo->weight.green, - pScreenInfo->weight.blue, pScreenInfo->depth); - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - /* - * Set default visual. - */ - - if (!xf86SetDefaultVisual(pScreenInfo, -1)) - { - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - if ((pScreenInfo->depth > 8) && - (((pScreenInfo->defaultVisual | DynamicClass) != DirectColor) || - ((pScreenInfo->defaultVisual == DirectColor) && - (pATI->DAC == ATI_DAC_INTERNAL)))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Driver does not support default visual %s for depth %d.\n", - xf86GetVisualName(pScreenInfo->defaultVisual), - pScreenInfo->depth); - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - /* - * Set colour gamma. - */ - -#ifndef AVOID_CPIO - - if (pScreenInfo->depth > 1) - -#endif /* AVOID_CPIO */ - - { - if (!xf86SetGamma(pScreenInfo, defaultGamma)) - { - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - } - - pATI->depth = pScreenInfo->depth; - pATI->bitsPerPixel = pScreenInfo->bitsPerPixel; - pATI->weight = pScreenInfo->weight; - pATI->XModifier = pATI->bitsPerPixel / UnitOf(pATI->bitsPerPixel); - - /* - * Determine which CRT controller to use for video modes. - */ - -#ifndef AVOID_CPIO - - if ((pATI->Chip >= ATI_CHIP_88800GXC) && - (pATI->depth >= 8) && - (pATI->Chipset == ATI_CHIPSET_ATI)) - -#endif /* AVOID_CPIO */ - - { - pATI->NewHW.crtc = ATI_CRTC_MACH64; - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using Mach64 accelerator CRTC.\n"); - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - /* - * No need for VGA I/O resources during operating state (but they - * are still decoded). - */ - pResources = - xf86SetOperatingState(resVgaIo, pATI->iEntity, ResUnusedOpr); - if (pResources) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Logic error setting operating state for VGA I/O.\n"); - xf86FreeResList(pResources); - } - - if (pATI->CPIO_VGAWonder) - { - pResources = xf86SetOperatingState(pATI->VGAWonderResources, - pATI->iEntity, ResUnusedOpr); - if (pResources) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Logic error setting operating state for" - " VGAWonder I/O.\n"); - xf86FreeResList(pResources); - } - } - } - -#endif /* AVOID_CPIO */ - - } - -#ifndef AVOID_CPIO - - else - { - pATI->NewHW.crtc = ATI_CRTC_VGA; - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using VGA CRTC.\n"); - } - - /* Complain if VGA is needed but not there */ - if ((pATI->NewHW.crtc == ATI_CRTC_VGA) || !pATI->OptionLinear) - { - /* VGA is required at this point */ - if (pATI->VGAAdapter == ATI_ADAPTER_NONE) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "VGA is not available through this adapter.\n"); - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - if (pATI->Coprocessor != ATI_CHIP_NONE) - { - /* Ignore any 8514/A or Mach8 accelerator from this point on */ - pATI->Adapter = pATI->VGAAdapter; - - /* Accelerator and VGA cannot share memory */ - pATI->VideoRAM = 0; - } - } - -#endif /* AVOID_CPIO */ - - /* - * Decide between the CRT and the panel. - */ - if (pATI->LCDPanelID >= 0) - { - if (!pATI->OptionPanelDisplay) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_CONFIG, - "Using CRT interface and disabling digital flat panel.\n"); - } - else - { - int HDisplay, VDisplay; - CARD8 ClockMask, PostMask; - - /* - * Determine porch data. This groks the mode on entry to extract - * the width and position of its sync and blanking pulses, and - * considers any overscan as part of the displayed area, given that - * the overscan is also stretched. - * - * This also attempts to determine panel dimensions but cannot do - * so for one that is "auto-stretched". - */ - - if (pATI->Chip == ATI_CHIP_264LT) - { - pATIHW->lcd_gen_ctrl = inr(LCD_GEN_CTRL); - - /* Set up to read non-shadow registers */ - if (pATIHW->lcd_gen_ctrl & SHADOW_RW_EN) - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl & ~SHADOW_RW_EN); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - pATIHW->lcd_index = inr(LCD_INDEX); - pATIHW->config_panel = ATIMach64GetLCDReg(LCD_CONFIG_PANEL); - pATIHW->lcd_gen_ctrl = ATIMach64GetLCDReg(LCD_GEN_CNTL); - - /* Set up to read non-shadow registers */ - if (pATIHW->lcd_gen_ctrl & SHADOW_RW_EN) - ATIMach64PutLCDReg(LCD_GEN_CNTL, - pATIHW->lcd_gen_ctrl & ~SHADOW_RW_EN); - } - -#ifndef AVOID_CPIO - - if (!(pATIHW->crtc_gen_cntl & CRTC_EXT_DISP_EN)) - { - pATIHW->clock = (inb(R_GENMO) & 0x0CU) >> 2; - - pATIHW->crt[0] = GetReg(CRTX(pATI->CPIO_VGABase), 0x00U); - pATIHW->crt[2] = GetReg(CRTX(pATI->CPIO_VGABase), 0x02U); - pATIHW->crt[3] = GetReg(CRTX(pATI->CPIO_VGABase), 0x03U); - pATIHW->crt[4] = GetReg(CRTX(pATI->CPIO_VGABase), 0x04U); - pATIHW->crt[5] = GetReg(CRTX(pATI->CPIO_VGABase), 0x05U); - pATIHW->crt[6] = GetReg(CRTX(pATI->CPIO_VGABase), 0x06U); - pATIHW->crt[7] = GetReg(CRTX(pATI->CPIO_VGABase), 0x07U); - pATIHW->crt[9] = GetReg(CRTX(pATI->CPIO_VGABase), 0x09U); - pATIHW->crt[16] = GetReg(CRTX(pATI->CPIO_VGABase), 0x10U); - pATIHW->crt[17] = GetReg(CRTX(pATI->CPIO_VGABase), 0x11U); - pATIHW->crt[21] = GetReg(CRTX(pATI->CPIO_VGABase), 0x15U); - pATIHW->crt[22] = GetReg(CRTX(pATI->CPIO_VGABase), 0x16U); - - /* Switch to shadow registers */ - if (pATI->Chip == ATI_CHIP_264LT) - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl | SHADOW_RW_EN); - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - ATIMach64PutLCDReg(LCD_GEN_CNTL, - pATIHW->lcd_gen_ctrl | SHADOW_RW_EN); - - pATIHW->shadow_vga[0] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x00U); - pATIHW->shadow_vga[2] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x02U); - pATIHW->shadow_vga[3] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x03U); - pATIHW->shadow_vga[4] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x04U); - pATIHW->shadow_vga[5] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x05U); - pATIHW->shadow_vga[6] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x06U); - pATIHW->shadow_vga[7] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x07U); - pATIHW->shadow_vga[9] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x09U); - pATIHW->shadow_vga[16] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x10U); - pATIHW->shadow_vga[17] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x11U); - pATIHW->shadow_vga[21] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x15U); - pATIHW->shadow_vga[22] = - GetReg(CRTX(pATI->CPIO_VGABase), 0x16U); - - /* - * HSyncStart and HSyncEnd should equal their shadow - * counterparts. Otherwise, due to a chip bug, the panel might - * not sync, regardless of which register set is used to drive - * the panel. There are certain combinations of register - * values where the panel does in fact sync, but it remains - * impossible to accurately determine the horizontal sync pulse - * timing actually seen by the panel. - * - * Note that this hardware bug does not affect the CRT output. - */ - if ((pATIHW->crt[4] != pATIHW->shadow_vga[4]) || - ((pATIHW->crt[5] ^ pATIHW->shadow_vga[5]) & 0x1FU)) - { - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_NOTICE, 0, - "Invalid horizontal sync pulse timing detected in mode" - " on server entry.\n"); - - /* Don't trust input timing */ - pATI->OptionLCDSync = TRUE; - ModeType = 0; - } - - /* Merge in shadow registers as appropriate */ - if (pATIHW->lcd_gen_ctrl & SHADOW_EN) - { - pATIHW->crt[0] = pATIHW->shadow_vga[0]; - pATIHW->crt[2] = pATIHW->shadow_vga[2]; - pATIHW->crt[3] = pATIHW->shadow_vga[3]; - pATIHW->crt[4] = pATIHW->shadow_vga[4]; - pATIHW->crt[5] = pATIHW->shadow_vga[5]; - - if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR)) - { - pATIHW->crt[6] = pATIHW->shadow_vga[6]; - pATIHW->crt[7] &= ~0x29U; - pATIHW->crt[7] |= pATIHW->shadow_vga[7] & 0x29U; - pATIHW->crt[9] &= ~0x20U; - pATIHW->crt[9] |= pATIHW->shadow_vga[9] & 0x20U; - pATIHW->crt[21] = pATIHW->shadow_vga[21]; - pATIHW->crt[22] = pATIHW->shadow_vga[22]; - } - } - - if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR)) - { - pATIHW->crt[7] &= ~0x84U; - pATIHW->crt[7] |= pATIHW->shadow_vga[7] & 0x84U; - pATIHW->crt[16] = pATIHW->shadow_vga[16]; - pATIHW->crt[17] &= ~0x0FU; - pATIHW->crt[17] |= pATIHW->shadow_vga[17] & 0x0FU; - } - - pATI->LCDHSyncWidth = - (pATIHW->crt[5] - pATIHW->crt[4]) & 0x1FU; - pATI->LCDHBlankWidth = (((pATIHW->crt[3] & 0x1FU) | - ((pATIHW->crt[5] >> 2) & 0x20U)) - - pATIHW->crt[2]) & 0x3FU; - pATI->LCDVSyncWidth = - (pATIHW->crt[17] - pATIHW->crt[16]) & 0x0FU; - pATI->LCDVBlankWidth = - ((pATIHW->crt[22] - pATIHW->crt[21]) & 0xFFU) + 1; - - pATI->LCDHSyncStart = - ((pATIHW->crt[4] - pATIHW->crt[2]) & 0xFFU) + 1; - pATI->LCDVSyncStart = (((((pATIHW->crt[7] << 2) & 0x0200U) | - ((pATIHW->crt[7] << 6) & 0x0100U) | - pATIHW->crt[16]) - - (((pATIHW->crt[9] << 4) & 0x0200U) | - ((pATIHW->crt[7] << 5) & 0x0100U) | - pATIHW->crt[21])) & 0xFFU) + 1; - - HDisplay = pATI->LCDHSyncStart + pATI->LCDHSyncWidth - - pATI->LCDHBlankWidth; - if (HDisplay > 0) - pATI->LCDHBlankWidth += (HDisplay + 0x3FU) & ~0x3FU; - VDisplay = pATI->LCDVSyncStart + pATI->LCDVSyncWidth - - pATI->LCDVBlankWidth; - if (VDisplay > 0) - pATI->LCDVBlankWidth += (VDisplay + 0xFFU) & ~0xFFU; - - HDisplay = pATIHW->crt[0] + 5 - pATI->LCDHBlankWidth; - VDisplay = (((pATIHW->crt[7] << 4) & 0x0200U) | - ((pATIHW->crt[7] << 8) & 0x0100U) | - pATIHW->crt[6]) + 3 - pATI->LCDVBlankWidth; - } - else - -#endif /* AVOID_CPIO */ - - { - pATIHW->clock = inr(CLOCK_CNTL) & 0x03U; - - pATIHW->crtc_h_total_disp = inr(CRTC_H_TOTAL_DISP); - pATIHW->crtc_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID); - pATIHW->crtc_v_total_disp = inr(CRTC_V_TOTAL_DISP); - pATIHW->crtc_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID); - pATIHW->ovr_wid_left_right = inr(OVR_WID_LEFT_RIGHT); - pATIHW->ovr_wid_top_bottom = inr(OVR_WID_TOP_BOTTOM); - - /* Switch to shadow registers */ - if (pATI->Chip == ATI_CHIP_264LT) - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl | SHADOW_RW_EN); - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - ATIMach64PutLCDReg(LCD_GEN_CNTL, - pATIHW->lcd_gen_ctrl | SHADOW_RW_EN); - - /* Oddly enough, there are no shadow overscan registers */ - pATIHW->shadow_h_total_disp = inr(CRTC_H_TOTAL_DISP); - pATIHW->shadow_h_sync_strt_wid = inr(CRTC_H_SYNC_STRT_WID); - pATIHW->shadow_v_total_disp = inr(CRTC_V_TOTAL_DISP); - pATIHW->shadow_v_sync_strt_wid = inr(CRTC_V_SYNC_STRT_WID); - - /* - * HSyncStart and HSyncEnd should equal their shadow - * counterparts. Otherwise, due to a chip bug, the panel might - * not sync, regardless of which register set is used to drive - * the panel. There are certain combinations of register - * values where the panel does in fact sync, but it remains - * impossible to accurately determine the horizontal sync pulse - * timing actually seen by the panel. - * - * Note that this hardware bug does not affect the CRT output. - */ - if (((pATIHW->crtc_h_sync_strt_wid ^ - pATIHW->shadow_h_sync_strt_wid) & - (CRTC_H_SYNC_STRT | CRTC_H_SYNC_STRT_HI | - CRTC_H_SYNC_WID))) - { - xf86DrvMsgVerb(pScreenInfo->scrnIndex, X_NOTICE, 0, - "Invalid horizontal sync pulse timing detected in mode" - " on server entry.\n"); - - /* Don't trust input timing */ - pATI->OptionLCDSync = TRUE; - ModeType = 0; - } - - /* Merge in shadow registers as appropriate */ - if (pATIHW->lcd_gen_ctrl & SHADOW_EN) - { - /* XXX What about the LT? */ - if ((pATI->Chip < ATI_CHIP_264LTPRO) || - !(pATIHW->config_panel & DONT_SHADOW_HEND)) - { - pATIHW->crtc_h_total_disp &= ~CRTC_H_DISP; - pATIHW->crtc_h_total_disp |= - pATIHW->shadow_h_total_disp & CRTC_H_DISP; - } - - pATIHW->crtc_h_total_disp &= ~CRTC_H_TOTAL; - pATIHW->crtc_h_total_disp |= - pATIHW->shadow_h_total_disp & CRTC_H_TOTAL; - pATIHW->crtc_h_sync_strt_wid &= - ~(CRTC_H_SYNC_STRT | CRTC_H_SYNC_STRT_HI | - CRTC_H_SYNC_WID); - pATIHW->crtc_h_sync_strt_wid |= - pATIHW->shadow_h_sync_strt_wid & - (CRTC_H_SYNC_STRT | CRTC_H_SYNC_STRT_HI | - CRTC_H_SYNC_WID); - - if (pATIHW->lcd_gen_ctrl & USE_SHADOWED_VEND) - { - pATIHW->crtc_v_total_disp &= ~CRTC_V_DISP; - pATIHW->crtc_v_total_disp |= - pATIHW->shadow_v_total_disp & CRTC_V_DISP; - } - - if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR)) - { - pATIHW->crtc_v_total_disp &= ~CRTC_V_TOTAL; - pATIHW->crtc_v_total_disp |= - pATIHW->shadow_v_total_disp & CRTC_V_TOTAL; - } - } - - if (!(pATIHW->lcd_gen_ctrl & DONT_SHADOW_VPAR)) - { - pATIHW->crtc_v_sync_strt_wid &= - ~(CRTC_V_SYNC_STRT | CRTC_V_SYNC_WID); - pATIHW->crtc_v_sync_strt_wid |= - pATIHW->shadow_v_sync_strt_wid & - (CRTC_V_SYNC_STRT | CRTC_V_SYNC_WID); - } - - HDisplay = GetBits(pATIHW->crtc_h_total_disp, CRTC_H_DISP) + - GetBits(pATIHW->ovr_wid_left_right, OVR_WID_LEFT) + - GetBits(pATIHW->ovr_wid_left_right, OVR_WID_RIGHT); - VDisplay = GetBits(pATIHW->crtc_v_total_disp, CRTC_V_DISP) + - GetBits(pATIHW->ovr_wid_top_bottom, OVR_WID_TOP) + - GetBits(pATIHW->ovr_wid_top_bottom, OVR_WID_BOTTOM); - - pATI->LCDHSyncStart = - (GetBits(pATIHW->crtc_h_sync_strt_wid, - CRTC_H_SYNC_STRT_HI) * - (MaxBits(CRTC_H_SYNC_STRT) + 1)) + - GetBits(pATIHW->crtc_h_sync_strt_wid, CRTC_H_SYNC_STRT) - - HDisplay; - pATI->LCDHSyncWidth = - GetBits(pATIHW->crtc_h_sync_strt_wid, CRTC_H_SYNC_WID); - pATI->LCDHBlankWidth = - GetBits(pATIHW->crtc_h_total_disp, CRTC_H_TOTAL) - - HDisplay; - pATI->LCDVSyncStart = - GetBits(pATIHW->crtc_v_sync_strt_wid, CRTC_V_SYNC_STRT) - - VDisplay; - pATI->LCDVSyncWidth = - GetBits(pATIHW->crtc_v_sync_strt_wid, CRTC_V_SYNC_WID); - pATI->LCDVBlankWidth = - GetBits(pATIHW->crtc_v_total_disp, CRTC_V_TOTAL) - - VDisplay; - - HDisplay++; - VDisplay++; - } - - /* Restore LCD registers */ - if (pATI->Chip == ATI_CHIP_264LT) - { - outr(LCD_GEN_CTRL, pATIHW->lcd_gen_ctrl); - } - else /* if ((pATI->Chip == ATI_CHIP_264LTPRO) || - (pATI->Chip == ATI_CHIP_264XL) || - (pATI->Chip == ATI_CHIP_MOBILITY)) */ - { - ATIMach64PutLCDReg(LCD_GEN_CNTL, pATIHW->lcd_gen_ctrl); - outr(LCD_INDEX, pATIHW->lcd_index); - } - - HDisplay <<= 3; - pATI->LCDHSyncStart <<= 3; - pATI->LCDHSyncWidth <<= 3; - pATI->LCDHBlankWidth <<= 3; - - /* Calculate panel dimensions implied by the input timing */ - if ((pATIHW->horz_stretching & - (HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) == - HORZ_STRETCH_EN) - { - if (pATIHW->horz_stretching & HORZ_STRETCH_MODE) - { - if (pATIHW->horz_stretching & HORZ_STRETCH_BLEND) - { - HDisplay = - (HDisplay * (MaxBits(HORZ_STRETCH_BLEND) + 1)) / - GetBits(pATIHW->horz_stretching, - HORZ_STRETCH_BLEND); - } - } - else if (((pATIHW->horz_stretching & HORZ_STRETCH_LOOP) > - HORZ_STRETCH_LOOP15) || - (pATIHW->horz_stretching & - SetBits(1, HORZ_STRETCH_RATIO))) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Ignoring invalid horizontal stretch ratio in mode on" - " server entry.\n"); - } - else - { - IOValue = - GetBits(pATIHW->horz_stretching, HORZ_STRETCH_RATIO); - - switch (GetBits(pATIHW->horz_stretching, - HORZ_STRETCH_LOOP)) - { - case GetBits(HORZ_STRETCH_LOOP09, HORZ_STRETCH_LOOP): - i = 9; - IOValue &= (1 << 9) - 1; - break; - - case GetBits(HORZ_STRETCH_LOOP11, HORZ_STRETCH_LOOP): - i = 11; - IOValue &= (1 << 11) - 1; - break; - - case GetBits(HORZ_STRETCH_LOOP12, HORZ_STRETCH_LOOP): - i = 12; - IOValue &= (1 << 12) - 1; - break; - - case GetBits(HORZ_STRETCH_LOOP14, HORZ_STRETCH_LOOP): - i = 14; - IOValue &= (1 << 14) - 1; - break; - - case GetBits(HORZ_STRETCH_LOOP15, HORZ_STRETCH_LOOP): - default: /* Muffle compiler */ - i = 15; - IOValue &= (1 << 15) - 1; - break; - } - - if (IOValue) - { - /* Count the number of bits in IOValue */ - j = (IOValue >> 1) & 0x36DBU; - j = IOValue - j - ((j >> 1) & 0x36DBU); - j = ((j + (j >> 3)) & 0x71C7U) % 0x3FU; - - HDisplay = (HDisplay * i) / j; - } - } - } - - if ((pATIHW->vert_stretching & VERT_STRETCH_EN) && - !(pATIHW->ext_vert_stretch & AUTO_VERT_RATIO)) - { - if ((pATIHW->vert_stretching & VERT_STRETCH_USE0) || - (VDisplay <= 350)) - IOValue = - GetBits(pATIHW->vert_stretching, VERT_STRETCH_RATIO0); - else if (VDisplay <= 400) - IOValue = - GetBits(pATIHW->vert_stretching, VERT_STRETCH_RATIO1); - else if ((VDisplay <= 480) || - !(pATIHW->ext_vert_stretch & VERT_STRETCH_RATIO3)) - IOValue = - GetBits(pATIHW->vert_stretching, VERT_STRETCH_RATIO2); - else - IOValue = - GetBits(pATIHW->ext_vert_stretch, VERT_STRETCH_RATIO3); - - if (IOValue) - VDisplay = - (VDisplay * (MaxBits(VERT_STRETCH_RATIO0) + 1)) / - IOValue; - } - - /* Match calculated dimensions to probed dimensions */ - if (!pATI->LCDHorizontal) - { - if ((pATIHW->horz_stretching & - (HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) != - (HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) - pATI->LCDHorizontal = HDisplay; - } - else if (pATI->LCDHorizontal != HDisplay) - { - if ((pATIHW->horz_stretching & - (HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) != - (HORZ_STRETCH_EN | AUTO_HORZ_RATIO)) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Inconsistent panel horizontal dimension:" - " %d and %d.\n", pATI->LCDHorizontal, HDisplay); - HDisplay = pATI->LCDHorizontal; - } - - if (!pATI->LCDVertical) - { - if (!(pATIHW->vert_stretching & VERT_STRETCH_EN) || - !(pATIHW->ext_vert_stretch & AUTO_VERT_RATIO)) - pATI->LCDVertical = VDisplay; - } - else if (pATI->LCDVertical != VDisplay) - { - if (!(pATIHW->vert_stretching & VERT_STRETCH_EN) || - !(pATIHW->ext_vert_stretch & AUTO_VERT_RATIO)) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Inconsistent panel vertical dimension: %d and %d.\n", - pATI->LCDVertical, VDisplay); - VDisplay = pATI->LCDVertical; - } - - if (!pATI->LCDHorizontal || !pATI->LCDVertical) - { - if (pATI->LCDPanelID || (pATI->Chip <= ATI_CHIP_264LTPRO)) - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Unable to determine dimensions of panel (ID %d).\n", - pATI->LCDPanelID); - else - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Unable to determine dimensions of panel.\n"); - - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - /* If the mode on entry wasn't stretched, adjust timings */ - if (!(pATIHW->horz_stretching & HORZ_STRETCH_EN) && - ((HDisplay = pATI->LCDHorizontal - HDisplay) > 0)) - { - pATI->LCDHSyncStart -= HDisplay; - if (pATI->LCDHSyncStart < 0) - pATI->LCDHSyncStart = 0; - pATI->LCDHBlankWidth -= HDisplay; - HDisplay = pATI->LCDHSyncStart + pATI->LCDHSyncWidth; - if (pATI->LCDHBlankWidth < HDisplay) - pATI->LCDHBlankWidth = HDisplay; - } - - if (!(pATIHW->vert_stretching & VERT_STRETCH_EN) && - ((VDisplay = pATI->LCDVertical - VDisplay) > 0)) - { - pATI->LCDVSyncStart -= VDisplay; - if (pATI->LCDVSyncStart < 0) - pATI->LCDVSyncStart = 0; - pATI->LCDVBlankWidth -= VDisplay; - VDisplay = pATI->LCDVSyncStart + pATI->LCDVSyncWidth; - if (pATI->LCDVBlankWidth < VDisplay) - pATI->LCDVBlankWidth = VDisplay; - } - - if (pATI->LCDPanelID || (pATI->Chip <= ATI_CHIP_264LTPRO)) - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%dx%d panel (ID %d) detected.\n", - pATI->LCDHorizontal, pATI->LCDVertical, pATI->LCDPanelID); - else - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "%dx%d panel detected.\n", - pATI->LCDHorizontal, pATI->LCDVertical); - - if (LCDPanelInfo) - { - for (i = 0; i < 24; i++) - Buffer[i] = BIOSByte(LCDPanelInfo + 1 + i); - for (; --i >= 0; ) - if (Buffer[i] && Buffer[i] != ' ') - { - Buffer[i + 1] = '\0'; - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "Panel model %s.\n", Buffer); - break; - } - } - - /* - * Determine panel clock. This must be done after option - * processing so that the adapter's reference frequency is always - * available. - * - * Get post divider. A GCC bug has caused the following expression - * to be broken down into its individual components. - */ - ClockMask = PLL_VCLK0_XDIV << pATIHW->clock; - PostMask = PLL_VCLK0_POST_DIV << (pATIHW->clock * 2); - i = GetBits(ATIMach64GetPLLReg(PLL_XCLK_CNTL), ClockMask); - i *= MaxBits(PLL_VCLK0_POST_DIV) + 1; - i |= GetBits(ATIMach64GetPLLReg(PLL_VCLK_POST_DIV), PostMask); - - /* Calculate clock of mode on entry */ - Numerator = ATIMach64GetPLLReg(PLL_VCLK0_FB_DIV + pATIHW->clock) * - pATI->ReferenceNumerator; - Denominator = pATI->ClockDescriptor.MinM * - pATI->ReferenceDenominator * - pATI->ClockDescriptor.PostDividers[i]; - pATI->LCDClock = ATIDivide(Numerator, Denominator, 1, 0); - - xf86DrvMsg(pScreenInfo->scrnIndex, X_PROBED, - "Panel clock is %.3f MHz.\n", - (double)(pATI->LCDClock) / 1000.0); - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using digital flat panel interface%s.\n", - pATI->OptionCRTDisplay ? - " to display on both CRT and panel" : ""); - } - } - - /* - * Finish detecting video RAM size. - */ - pScreenInfo->videoRam = pATI->VideoRAM; - -#ifndef AVOID_CPIO - - AcceleratorVideoRAM = pScreenInfo->videoRam; - if (pATI->Chip == ATI_CHIP_VGA) - { - if (pATI->depth <= 4) - VGAVideoRAM = 256; - else - VGAVideoRAM = 64; - - /* For VGA, allow a lower override */ - if ((pGDev->videoRam > 0) && (pGDev->videoRam < VGAVideoRAM)) - VGAVideoRAM = pGDev->videoRam; - } - else if (pATI->CPIO_VGAWonder) - { - /* - * XXX There's an assumption here that the values retrieved are those - * set by BIOS initialisation. - */ - if (pATI->Chip <= ATI_CHIP_18800_1) - { - VGAVideoRAM = - videoRamSizes[GetBits(ATIGetExtReg(0xBBU), 0x20U) + 1]; - if (AcceleratorVideoRAM > 512) - AcceleratorVideoRAM = 512; - } - else - { - IOValue = ATIGetExtReg(0xB0U); - if (IOValue & 0x08U) - VGAVideoRAM = 1024; - else if (IOValue & 0x10U) - VGAVideoRAM = 512; - else - VGAVideoRAM = 256; - if (AcceleratorVideoRAM > 1024) - AcceleratorVideoRAM = 1024; - } - } - - /* Check for hardware limitations */ - if (!AcceleratorVideoRAM) - { - pScreenInfo->videoRam = pATI->VideoRAM = VGAVideoRAM; - - /* - * VGA Wonder V3's, V4's and V5's don't appear to support banking in - * planar modes. - */ - if ((pATI->depth <= 4) && - (pATI->Chip <= ATI_CHIP_18800_1) && - (VGAVideoRAM > 256)) - { - if (pATI->OptionDevel) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "Virtual resolutions requiring more than %s kB\n of video" - " memory might not function properly.\n", - (pATI->depth == 1) ? "64" : "256"); - } - else - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "VideoRAM reduced to 256 kB due to hardware" - " limitations.\n"); - pScreenInfo->videoRam = 256; - } - } - } - else if ((pATI->NewHW.crtc == ATI_CRTC_MACH64) || - (pATI->Chip >= ATI_CHIP_264CT)) - -#endif /* AVOID_CPIO */ - - { - -#ifndef AVOID_CPIO - - if (pATI->depth >= 8) - -#endif /* AVOID_CPIO */ - - { - /* Get adapter's linear aperture configuration */ - pATIHW->config_cntl = inr(CONFIG_CNTL); - pATI->LinearBase = - GetBits(pATIHW->config_cntl, CFG_MEM_AP_LOC) << 22; - if ((pATIHW->config_cntl & CFG_MEM_AP_SIZE) != CFG_MEM_AP_SIZE) - { - pATI->LinearSize = - GetBits(pATIHW->config_cntl, CFG_MEM_AP_SIZE) << 22; - - /* - * Linear aperture could have been disabled (but still - * assigned) by BIOS initialisation. - */ - if (pATI->LinearBase && !pATI->LinearSize) - { - if ((pATI->Chip <= ATI_CHIP_88800GXD) && - (pATI->VideoRAM < 4096)) - pATI->LinearSize = 4 * 1024 * 1024; - else - pATI->LinearSize = 8 * 1024 * 1024; - } - } - -#ifndef AVOID_CPIO - - /* Except for PCI & AGP, allow for user override */ - if (!pVideo) - { - if (pATI->Chip == ATI_CHIP_88800CX) - IOValue = ~((CARD32)((1 << 23) - 1)); - else if (pATI->Chip >= ATI_CHIP_88800GXE) - IOValue = ~((CARD32)((1 << 24) - 1)); - else if (pATI->VideoRAM >= 4096) - IOValue = ~((CARD32)((1 << 23) - 1)); - else - IOValue = ~((CARD32)((1 << 22) - 1)); - - IOValue &= pGDev->MemBase; - if (IOValue && - (IOValue <= (CARD32)(MaxBits(CFG_MEM_AP_LOC) << 22))) - pATI->LinearBase = IOValue; - - if (!pATI->LinearBase) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Linear aperture not configured. Specify \"MemBase\"" - " override in XF86Config \"Device\" section.\n"); - } - else - { - if (!pATI->LinearSize) - { - if ((pATI->Chip <= ATI_CHIP_88800GXD) && - (pATI->VideoRAM < 4096)) - pATI->LinearSize = 4 * 1024 * 1024; - else - pATI->LinearSize = 8 * 1024 * 1024; - } - - Resources[0].type = ResExcMemBlock | ResBus; - Resources[0].rBegin = pATI->LinearBase; - Resources[0].rEnd = - pATI->LinearBase + pATI->LinearSize - 1; - if (xf86RegisterResources(pATI->iEntity, Resources, - ResNone)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to register %d MB linear aperture at" - " 0x%08X.\n", pATI->LinearSize >> 10, - pATI->LinearBase); - - pATI->LinearSize = 0; - } - } - } - -#endif /* AVOID_CPIO */ - - if (pATI->LinearBase && pATI->LinearSize) - { - /* - * Unless specified in PCI configuration space, set MMIO - * address to tail end of linear aperture. - */ - if (!pATI->Block0Base) - { - pATI->Block0Base = - pATI->LinearBase + pATI->LinearSize - 0x00000400U; - pATI->MMIOInLinear = TRUE; - } - - AcceleratorVideoRAM = pATI->LinearSize >> 10; - - /* - * Account for MMIO area at the tail end of the linear - * aperture, if it is needed or if it cannot be disabled. - */ - if (pATI->MMIOInLinear || (pATI->Chip < ATI_CHIP_264VTB)) - AcceleratorVideoRAM -= 2; - - ServerVideoRAM = pATI->VideoRAM; - - if (pATI->Cursor > ATI_CURSOR_SOFTWARE) - { - /* - * Allocate a 1 kB cursor image area at the top of the - * little-endian aperture, just before any MMIO area that - * might also be there. - */ - if (ServerVideoRAM > AcceleratorVideoRAM) - ServerVideoRAM = AcceleratorVideoRAM; - - ServerVideoRAM--; - pATI->CursorOffset = ServerVideoRAM << 10; - pATI->CursorBase = pATI->LinearBase + pATI->CursorOffset; - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Storing hardware cursor image at 0x%08X.\n", - pATI->CursorBase); - } - -#ifndef AVOID_CPIO - - if (pATI->OptionLinear) - -#endif /* AVOID_CPIO */ - - { - CARD32 PageSize = getpagesize() >> 10; - -#if X_BYTE_ORDER == X_LITTLE_ENDIAN - - /* - * MMIO areas must be mmap()'ed separately to avoid write - * combining them. Thus, they might not end up still - * adjacent with the little-endian linear aperture after - * mmap()'ing. So, round down the linear aperture size to - * avoid an overlap. Any hardware cursor image area might - * not end up being write combined, but this seems - * preferable to further reducing the video memory size - * advertised to the server. - * - * XXX Ideally this should be dealt with in the os-support - * layer, i.e., it should be possible to reset a - * subarea's write combining after it has been - * mmap()'ed, but doing so currently causes the removal - * of write combining for the entire aperture. - */ - if (pATI->MMIOInLinear) - AcceleratorVideoRAM -= AcceleratorVideoRAM % PageSize; - -#else /* if X_BYTE_ORDER != X_LITTLE_ENDIAN */ - - /* - * Big-endian apertures are 8 MB higher and don't contain - * an MMIO area. - */ - pATI->LinearBase += 0x00800000U; - AcceleratorVideoRAM = pATI->LinearSize >> 10; - -#endif /* X_BYTE_ORDER */ - - if (ServerVideoRAM > AcceleratorVideoRAM) - ServerVideoRAM = AcceleratorVideoRAM; - else if (AcceleratorVideoRAM > pATI->VideoRAM) - AcceleratorVideoRAM = pATI->VideoRAM; - - PageSize--; - AcceleratorVideoRAM = - (AcceleratorVideoRAM + PageSize) & ~PageSize; - - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using %d MB linear aperture at 0x%08X.\n", - pATI->LinearSize >> 20, pATI->LinearBase); - - /* Only mmap what is needed */ - ApertureSize = pATI->LinearSize = - AcceleratorVideoRAM << 10; - } - - if (ServerVideoRAM < pATI->VideoRAM) - { - pScreenInfo->videoRam = ServerVideoRAM; - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "Virtual resolutions will be limited to %d kB\n due to" - " linear aperture size and/or placement of hardware" - " cursor image area.\n", - ServerVideoRAM); - } - } - } - -#ifndef AVOID_CPIO - - /* Set up for a banked aperture */ - if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - pATI->UseSmallApertures = TRUE; - - /* Set banking functions */ - if (pATI->depth <= 4) - { - pATI->NewHW.SetBank = ATIMach64SetBankPlanar; - pATI->BankInfo.SetSourceBank = ATIMach64SetReadPlanar; - pATI->BankInfo.SetDestinationBank = ATIMach64SetWritePlanar; - pATI->BankInfo.SetSourceAndDestinationBanks = - ATIMach64SetReadWritePlanar; - } - else - { - pATI->NewHW.SetBank = ATIMach64SetBankPacked; - pATI->BankInfo.SetSourceBank = ATIMach64SetReadPacked; - pATI->BankInfo.SetDestinationBank = ATIMach64SetWritePacked; - pATI->BankInfo.SetSourceAndDestinationBanks = - ATIMach64SetReadWritePacked; - } - - /* - * Unless specified in PCI configuration space, or at the top of - * of a little-endian linear aperture, set MMIO address to the one - * just above the VGA aperture. This does not work on the CT - * (maybe others). - */ - if (!pATI->Block0Base && - ((pATI->Chip < ATI_CHIP_264CT) || - (pATI->Chip >= ATI_CHIP_264VT) || - pATI->OptionDevel)) - pATI->Block0Base = 0x000BFC00U; - } - - if (!pATI->OptionLinear) - pATI->LinearBase = 0; /* Not needed */ - -#endif /* AVOID_CPIO */ - - if (!pATI->LinearBase || !pATI->LinearSize) - { - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter == ATI_ADAPTER_NONE) - -#endif /* AVOID_CPIO */ - - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_ERROR, - "Linear aperture not available.\n"); - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - -#ifndef AVOID_CPIO - - /* Insurance */ - pATI->LinearBase = pATI->LinearSize = 0; - -#endif /* AVOID_CPIO */ - - } - - if (pATI->Block0Base) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using Block 0 MMIO aperture at 0x%08X.\n", pATI->Block0Base); - - /* Set Block1 MMIO address if supported */ - if (pATI->Chip >= ATI_CHIP_264VT) - { - pATI->Block1Base = pATI->Block0Base - 0x00000400U; - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using Block 1 MMIO aperture at 0x%08X.\n", - pATI->Block1Base); - } - } - } - -#ifndef AVOID_CPIO - - else - /* - * After BIOS initialisation, the accelerator (if any) and the VGA won't - * necessarily agree on the amount of video memory, depending on whether or - * where the memory boundary is configured. Any discrepancy will be - * resolved by ATIModePreInit(). - * - * However, it's possible that there is more video memory than VGA Wonder - * can architecturally handle. - */ - if (((pATI->Chip < ATI_CHIP_68800) || (pATI->Chip > ATI_CHIP_68800AX)) && - (AcceleratorVideoRAM < pScreenInfo->videoRam)) - { - if (pATI->OptionDevel) - { - if (pATI->depth == 1) - AcceleratorVideoRAM /= 4; - - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "Virtual resolutions requiring more than %d kB\n of video" - " memory might not function correctly.\n", - AcceleratorVideoRAM); - } - else - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "VideoRAM reduced to %d kB due to hardware limitations.\n", - AcceleratorVideoRAM); - - pScreenInfo->videoRam = AcceleratorVideoRAM; - } - } - - if (pATI->OptionLinear) - { - if (!pATI->LinearBase) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Linear aperture not supported in this configuration.\n"); - pATI->OptionLinear = FALSE; - } - else if (pATI->VGAAdapter != ATI_ADAPTER_NONE) - { - /* - * Free VGA memory aperture during operating state (but it is still - * decoded). - */ - pResources = xf86SetOperatingState(resVgaMem, pATI->iEntity, - ResUnusedOpr); - if (pResources) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Logic error setting operating state for VGA memory" - " aperture.\n"); - xf86FreeResList(pResources); - } - } - } - -#endif /* AVOID_CPIO */ - - if ((pATI->Cursor > ATI_CURSOR_SOFTWARE) && !pATI->CursorBase) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Unable to store hardware cursor image. Reverting to software" - " cursor.\n"); - pATI->Cursor = ATI_CURSOR_SOFTWARE; - } - - /* - * Remap apertures. Must lock and re-unlock around this in case the - * remapping fails. - */ - ATILock(pATI); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - if (!ATIMapApertures(pScreenInfo->scrnIndex, pATI)) - return FALSE; - - ATIUnlock(pATI); - - if (pATI->OptionAccel) - { - -#ifndef AVOID_CPIO - - if (!pATI->Block0Base || (pATI->NewHW.crtc == ATI_CRTC_VGA)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Acceleration not supported in this configuration.\n"); - pATI->OptionAccel = FALSE; - } - else - -#endif /* AVOID_CPIO */ - - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "MMIO write caching %sabled.\n", - pATI->OptionMMIOCache ? "en" : "dis"); - } - } - -#ifndef AVOID_CPIO - - if (pATI->Adapter >= ATI_ADAPTER_MACH32) - -#endif /* AVOID_CPIO */ - - { - if (pATI->Chip >= ATI_CHIP_264CT) - ATIReportMemory(pScreenInfo, pATI, - ATIMemoryTypeNames_264xT[pATI->MemoryType]); - else if (pATI->Chip == ATI_CHIP_88800CX) - ATIReportMemory(pScreenInfo, pATI, - ATIMemoryTypeNames_88800CX[pATI->MemoryType]); - else - ATIReportMemory(pScreenInfo, pATI, - ATIMemoryTypeNames_Mach[pATI->MemoryType]); - } - -#ifndef AVOID_CPIO - - else if (pATI->Adapter >= ATI_ADAPTER_V3) - { - ATIReportMemory(pScreenInfo, pATI, - (ATIGetExtReg(0xB7U) & 0x04U) ? "DRAM" : "VRAM"); - } - else - { - ATIReportMemory(pScreenInfo, pATI, "video memory"); - } - -#endif /* AVOID_CPIO */ - - /* - * Finish banking setup. This needs to be fixed to not assume the mode on - * entry is a VGA mode. XXX - */ - -#ifndef AVOID_CPIO - - if (pATI->VGAAdapter == ATI_ADAPTER_NONE) - -#endif /* AVOID_CPIO */ - - { - pATIHW->crtc = pATI->NewHW.crtc; - -#ifndef AVOID_CPIO - - pATIHW->SetBank = (ATIBankProcPtr)NoopDDA; - pATI->BankInfo.BankSize = 0; /* No banking */ - -#endif /* AVOID_CPIO */ - - } - -#ifndef AVOID_CPIO - - else - { - pATIHW->crtc = ATI_CRTC_VGA; -#if 0 /* ___NOT_YET___ */ - if (pATI->ChipHasSUBSYS_CNTL) - { - } - else -#endif - if ((pATI->Chip >= ATI_CHIP_88800GXC) && - (pATI->LockData.crtc_gen_cntl & CRTC_EXT_DISP_EN)) - { - pATIHW->crtc = ATI_CRTC_MACH64; - } - - if (pATI->depth <= 4) - { - pATI->BankInfo.nBankDepth = 1; - pATI->NewHW.nPlane = 4; - } - else - { - pATI->BankInfo.nBankDepth = pATI->depth; - pATI->NewHW.nPlane = 1; - } - - if ((pATIHW->crtc != ATI_CRTC_VGA) || (GetReg(SEQX, 0x04U) & 0x08U)) - pATIHW->nPlane = 1; - else - pATIHW->nPlane = 4; - - pATIHW->nBank = ATIDivide(pATI->VideoRAM, - pATIHW->nPlane * pATI->BankInfo.BankSize, 10, 1); - pATI->NewHW.nBank = ATIDivide(pATI->VideoRAM, - pATI->NewHW.nPlane * pATI->BankInfo.BankSize, 10, 1); - - if (pATI->VGAAdapter == ATI_ADAPTER_VGA) - { - pATIHW->SetBank = pATI->NewHW.SetBank = - (ATIBankProcPtr)NoopDDA; - pATIHW->nBank = pATI->NewHW.nBank = 1; - } - else if (!pATI->UseSmallApertures) - { - pATIHW->SetBank = pATI->NewHW.SetBank; - } - else if ((pATIHW->crtc == ATI_CRTC_VGA) && - !(pATI->LockData.config_cntl & CFG_MEM_VGA_AP_EN)) - { - pATIHW->SetBank = (ATIBankProcPtr)NoopDDA; - pATIHW->nBank = 1; - } - else if (pATIHW->nPlane == 1) - { - pATIHW->SetBank = ATIMach64SetBankPacked; - } - else - { - pATIHW->SetBank = ATIMach64SetBankPlanar; - } - - if (((ApertureSize * pATI->depth) / pATI->BankInfo.nBankDepth) >= - (unsigned)(pScreenInfo->videoRam * 1024)) - pATI->BankInfo.BankSize = 0; /* No banking */ - } - -#endif /* AVOID_CPIO */ - - if (pATI->OptionShadowFB) - { - /* Until ShadowFB becomes a true screen wrapper, if it ever does... */ - -#ifndef AVOID_CPIO - - if (pATI->BankInfo.BankSize) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Cannot shadow a banked frame buffer.\n"); - pATI->OptionShadowFB = FALSE; - } - else if (pATI->depth < 8) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Cannot shadow a planar frame buffer.\n"); - pATI->OptionShadowFB = FALSE; - } - else - -#endif /* AVOID_CPIO */ - - if (pATI->OptionAccel) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Cannot shadow an accelerated frame buffer.\n"); - pATI->OptionShadowFB = FALSE; - } - else - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Using shadow frame buffer.\n"); - } - } - - /* 264VT-B's and later have DSP registers */ - if ((pATI->Chip >= ATI_CHIP_264VTB) && - !ATIDSPPreInit(pScreenInfo->scrnIndex, pATI)) - { - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - /* - * Determine minClock and maxClock. For adapters with supported - * programmable clock generators, start with an absolute maximum. - */ - if (pATI->ClockDescriptor.MaxN > 0) - { - Numerator = pATI->ClockDescriptor.MaxN * pATI->ReferenceNumerator; - Denominator = pATI->ClockDescriptor.MinM * pATI->ReferenceDenominator * - pATI->ClockDescriptor.PostDividers[0]; - - /* - * An integrated PLL behaves as though the reference frequency were - * doubled. It also does not appear to care about the colour depth. - */ - if (pATI->ProgrammableClock == ATI_CLOCK_INTERNAL) - Numerator <<= 1; - else if (pATI->depth > 8) - Denominator *= (pATI->bitsPerPixel / 8); - - ATIClockRange.maxClock = (Numerator / (Denominator * 1000)) * 1000; - - Numerator = pATI->ClockDescriptor.MinN * pATI->ReferenceNumerator; - Denominator = pATI->ClockDescriptor.MaxM * pATI->ReferenceDenominator * - pATI->ClockDescriptor.PostDividers[pATI->ClockDescriptor.NumD - 1]; - - if (pATI->ProgrammableClock == ATI_CLOCK_INTERNAL) - Numerator <<= 1; - - ATIClockRange.minClock = (Numerator / (Denominator * 1000)) * 1000; - - if (pATI->XCLKFeedbackDivider) - { - /* Possibly reduce maxClock due to memory bandwidth */ - Numerator = pATI->XCLKFeedbackDivider * 2 * - pATI->ReferenceNumerator; - Denominator = pATI->ClockDescriptor.MinM * - pATI->XCLKReferenceDivider * pATI->ReferenceDenominator; - -#ifndef AVOID_CPIO - - if (pATI->depth >= 8) - -#endif /* AVOID_CPIO */ - - { - Denominator *= pATI->bitsPerPixel / 4; - } - - i = (6 - 2) - pATI->XCLKPostDivider; - -#ifndef AVOID_CPIO - - if (pATI->NewHW.crtc == ATI_CRTC_VGA) - i--; - -#endif /* AVOID_CPIO */ - - i = (ATIDivide(Numerator, Denominator, i, -1) / 1000) * 1000; - if (i < ATIClockRange.maxClock) - ATIClockRange.maxClock = i; - } - } - - /* - * Assume an internal DAC can handle whatever frequency the internal PLL - * can produce (with the reference divider set by BIOS initialisation), but - * default maxClock to a lower chip-specific default. - */ - if ((pATI->DAC & ~0x0FU) == ATI_DAC_INTERNAL) - { - int DacSpeed; - switch (pATI->bitsPerPixel) - { - case 15: - case 16: - DacSpeed = pGDev->dacSpeeds[DAC_BPP16]; - break; - - case 24: - DacSpeed = pGDev->dacSpeeds[DAC_BPP24]; - break; - - case 32: - DacSpeed = pGDev->dacSpeeds[DAC_BPP32]; - break; - - default: - DacSpeed = 0; - break; - } - if (!DacSpeed) - DacSpeed = pGDev->dacSpeeds[DAC_BPP8]; - if (DacSpeed < ATIClockRange.maxClock) - { - DefaultmaxClock = 135000; - - if (pATI->depth > 8) - DefaultmaxClock = 80000; - - if ((pATI->Chip >= ATI_CHIP_264VTB) && - (pATI->Chip != ATI_CHIP_Mach64)) - { - if ((pATI->Chip >= ATI_CHIP_264VT4) && - (pATI->Chip != ATI_CHIP_264LTPRO)) - DefaultmaxClock = 230000; - else if (pATI->Chip >= ATI_CHIP_264VT3) - DefaultmaxClock = 200000; - else - DefaultmaxClock = 170000; - } - if (DacSpeed > DefaultmaxClock) - ATIClockRange.maxClock = DacSpeed; - else if (DefaultmaxClock < ATIClockRange.maxClock) - ATIClockRange.maxClock = DefaultmaxClock; - } - } - else - { - switch(pATI->DAC) - { - case ATI_DAC_STG1700: - case ATI_DAC_STG1702: - case ATI_DAC_STG1703: - DefaultmaxClock = 110000; - break; - - case ATI_DAC_IBMRGB514: - pATI->maxClock = 220000; - -#ifndef AVOID_CPIO - - if (pATI->NewHW.crtc == ATI_CRTC_VGA) - { - DefaultmaxClock = 100000; - } - else - -#endif /* AVOID_CPIO */ - - { - DefaultmaxClock = 220000; - } - break; - - default: - -#ifndef AVOID_CPIO - - /* - * 80 MHz is too high in some cases. Limit 18800-x's to 40 - * MHz. Don't exceed the memory clock on VGA Wonder capables - * with less than 1 MB, if using a packed mode. - */ - if ((pATI->Chip == ATI_CHIP_18800) || - (pATI->Chip == ATI_CHIP_18800_1)) - { - DefaultmaxClock = 40000; - } - else if (pATI->CPIO_VGAWonder && - (pATI->VideoRAM < 1024) && - (pATI->depth >= 8)) - { - DefaultmaxClock = - (GetBits(BIOSByte(0x44U), 0x04U) * 5000) + 40000; - } - else - -#endif /* AVOID_CPIO */ - - { - DefaultmaxClock = 80000; - } - - break; - } - - if (DefaultmaxClock < ATIClockRange.maxClock) - ATIClockRange.maxClock = DefaultmaxClock; - } - - if (pATI->ClockDescriptor.MaxN <= 0) - { - ATIClockRange.maxClock = DefaultmaxClock; - xf86DrvMsg(pScreenInfo->scrnIndex, X_INFO, - "Maximum pixel clock: %.3f MHz.\n", - (double)ATIClockRange.maxClock / 1000.0); - } - - /* - * Determine available pixel clock frequencies. - */ - - ATIClockPreInit(pScreenInfo, pATI, pGDev, &ATIClockRange); - if (pATI->ProgrammableClock > ATI_CLOCK_FIXED) - Strategy = LOOKUP_BEST_REFRESH; - - /* - * Mode validation. - */ - -#ifdef AVOID_CPIO - - if (pATI->Chip >= ATI_CHIP_264CT) - { - minPitch = 8; - } - -#else /* AVOID_CPIO */ - - if ((pATI->depth >= 8) && (pATI->Chip >= ATI_CHIP_264CT)) - { - minPitch = 8; - } - else if (pATI->CPIO_VGAWonder && - (pATI->Chip <= ATI_CHIP_18800_1) && - (pATI->VideoRAM == 256) && - (pATI->depth >= 8)) - { - minPitch = 32; /* Very strange, but true */ - maxPitch = 0x3FU; - } - -#endif /* AVOID_CPIO */ - - else - { - minPitch = 16; - } - - pATI->pitchInc = minPitch; - -#ifndef AVOID_CPIO - - if (pATI->depth >= 8) - -#endif /* AVOID_CPIO */ - - { - pATI->pitchInc *= pATI->bitsPerPixel; - } - - switch (pATI->NewHW.crtc) - { - -#ifndef AVOID_CPIO - - case ATI_CRTC_VGA: - /* - * IBM's VGA doesn't allow for interlaced modes. - */ - if (pATI->Adapter <= ATI_ADAPTER_VGA) - ATIClockRange.interlaceAllowed = FALSE; - - pScreenInfo->maxHValue = (0xFFU + 1) << 3; /* max HTotal */ - - /* - * The maximum VTotal value set here applies to all modes, - * including interlaced, doublescanned or multiscanned modes. - * Finer-grained checks are done in ATIValidateMode(). - */ - pScreenInfo->maxVValue = 0x03FFU + 1; - if (pATI->Adapter > ATI_ADAPTER_VGA) - { - pScreenInfo->maxVValue <<= 1; - if (ATIClockRange.interlaceAllowed && - (pATI->Chip < ATI_CHIP_264CT)) - pScreenInfo->maxVValue <<= 1; - } - - /* - * 18800-x and 28800-x do not support interlaced modes when the - * scanline pitch is 2048 pixels or more. For 18800-x's with 256 - * kB of video memory, the limit for 8bpp is 1024. - */ - if (ATIClockRange.interlaceAllowed && - (pATI->Chip <= ATI_CHIP_28800_6)) - { - if (minPitch == 32) - pATI->MaximumInterlacedPitch = 0x1FU * 32; - else - pATI->MaximumInterlacedPitch = 0x7FU * minPitch; - } - - Strategy |= LOOKUP_CLKDIV2; - - break; - -#endif /* AVOID_CPIO */ - - case ATI_CRTC_MACH64: - pScreenInfo->maxHValue = (MaxBits(CRTC_H_TOTAL) + 1) << 3; - - if (pATI->Chip < ATI_CHIP_264VT) - { - /* - * ATI finally fixed accelerated doublescanning in the 264VT - * and later. On 88800's, the bit is documented to exist, but - * only doubles the vertical timings. On the 264CT and 264ET, - * the bit is ignored. - */ - ATIClockRange.doubleScanAllowed = FALSE; - - /* CRTC_H_TOTAL is one bit narrower */ - pScreenInfo->maxHValue >>= 1; - } - - pScreenInfo->maxVValue = MaxBits(CRTC_V_TOTAL) + 1; - - maxPitch = MaxBits(CRTC_PITCH); - - break; - - default: - break; - } - - maxPitch *= minPitch; - - if (pATI->OptionAccel) - { - /* - * Set engine restrictions on coordinate space. Use maxPitch for the - * horizontal and maxHeight for the vertical. - */ - if (maxPitch > (ATIMach64MaxX / pATI->XModifier)) - maxPitch = ATIMach64MaxX / pATI->XModifier; - maxHeight = ATIMach64MaxY; - - /* - * For SGRAM & WRAM adapters, the display engine limits the pitch to - * multiples of 64 bytes. - */ - if ((pATI->Chip >= ATI_CHIP_264CT) && - ((pATI->Chip >= ATI_CHIP_264VTB) || - (pATI->MemoryType >= MEM_264_SGRAM))) - pATI->pitchInc = pATI->XModifier * (64 * 8); - } - - if (pATI->OptionPanelDisplay && (pATI->LCDPanelID >= 0) && - (ModeType == M_T_BUILTIN)) - { - /* - * Given LCD modes are more tightly controlled than CRT modes, allow - * the user the option of not specifying a panel's horizontal sync - * and/or vertical refresh tolerances. - */ - Strategy |= LOOKUP_OPTIONAL_TOLERANCES; - - /* - * Add a mode to the end of the monitor's list for the panel's native - * resolution. - */ - pMode = (DisplayModePtr)xnfcalloc(1, SizeOf(DisplayModeRec)); - pMode->name = "Native panel mode"; - pMode->type = M_T_BUILTIN; - pMode->Clock = pATI->LCDClock; - pMode->HDisplay = pATI->LCDHorizontal; - pMode->VDisplay = pATI->LCDVertical; - - /* - * These timings are bogus, but enough to survive sync tolerance - * checks. - */ - pMode->HSyncStart = pMode->HDisplay; - pMode->HSyncEnd = pMode->HSyncStart + minPitch; - pMode->HTotal = pMode->HSyncEnd + minPitch; - pMode->VSyncStart = pMode->VDisplay; - pMode->VSyncEnd = pMode->VSyncStart + 1; - pMode->VTotal = pMode->VSyncEnd + 1; - - pMode->CrtcHDisplay = pMode->HDisplay; - pMode->CrtcHBlankStart = pMode->HDisplay; - pMode->CrtcHSyncStart = pMode->HSyncStart; - pMode->CrtcHSyncEnd = pMode->HSyncEnd; - pMode->CrtcHBlankEnd = pMode->HTotal; - pMode->CrtcHTotal = pMode->HTotal; - - pMode->CrtcVDisplay = pMode->VDisplay; - pMode->CrtcVBlankStart = pMode->VDisplay; - pMode->CrtcVSyncStart = pMode->VSyncStart; - pMode->CrtcVSyncEnd = pMode->VSyncEnd; - pMode->CrtcVBlankEnd = pMode->VTotal; - pMode->CrtcVTotal = pMode->VTotal; - - if (!pScreenInfo->monitor->Modes) - { - pScreenInfo->monitor->Modes = pMode; - } - else - { - pScreenInfo->monitor->Last->next = pMode; - pMode->prev = pScreenInfo->monitor->Last; - } - - pScreenInfo->monitor->Last = pMode; - - /* - * Defeat Xconfigurator brain damage. Ignore all HorizSync and - * VertRefresh specifications. For now, this does not take - * SYNC_TOLERANCE into account. - */ - if (pScreenInfo->monitor->nHsync > 0) - { - double hsync = (double)pMode->Clock / - (pATI->LCDHorizontal + pATI->LCDHBlankWidth); - - for (i = 0; ; i++) - { - if (i >= pScreenInfo->monitor->nHsync) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "Conflicting XF86Config HorizSync specification(s)" - " ignored.\n"); - break; - } - - if ((hsync >= pScreenInfo->monitor->hsync[i].lo) && - (hsync <= pScreenInfo->monitor->hsync[i].hi)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Extraneous XF86Config HorizSync specification(s)" - " ignored.\n"); - break; - } - } - - pScreenInfo->monitor->nHsync = 0; - } - - if (pScreenInfo->monitor->nVrefresh > 0) - { - double vrefresh = ((double)pMode->Clock * 1000.0) / - ((pATI->LCDHorizontal + pATI->LCDHBlankWidth) * - (pATI->LCDVertical + pATI->LCDVBlankWidth)); - - for (i = 0; ; i++) - { - if (i >= pScreenInfo->monitor->nVrefresh) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_NOTICE, - "Conflicting XF86Config VertRefresh specification(s)" - " ignored.\n"); - break; - } - - if ((vrefresh >= pScreenInfo->monitor->vrefresh[i].lo) && - (vrefresh <= pScreenInfo->monitor->vrefresh[i].hi)) - { - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Extraneous XF86Config VertRefresh specification(s)" - " ignored.\n"); - break; - } - } - - pScreenInfo->monitor->nVrefresh = 0; - } - } - - i = xf86ValidateModes(pScreenInfo, - pScreenInfo->monitor->Modes, pScreenInfo->display->modes, - &ATIClockRange, NULL, minPitch, maxPitch, - pATI->pitchInc, 0, maxHeight, - pScreenInfo->display->virtualX, pScreenInfo->display->virtualY, - ApertureSize, Strategy); - if (i <= 0) - { - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - /* Remove invalid modes */ - xf86PruneDriverModes(pScreenInfo); - - /* Set current mode to the first in the list */ - pScreenInfo->currentMode = pScreenInfo->modes; - - /* Print mode list */ - xf86PrintModes(pScreenInfo); - - /* Set display resolution */ - xf86SetDpi(pScreenInfo, 0, 0); - - /* Load required modules */ - if (!ATILoadModules(pScreenInfo, pATI)) - { - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - return FALSE; - } - - pATI->displayWidth = pScreenInfo->displayWidth; - - /* Initialise for panning */ - ATIAdjustPreInit(pATI); - - /* - * Warn about modes that are too small, or not aligned, to scroll to the - * bottom right corner of the virtual screen. - */ - MinX = pScreenInfo->virtualX - pATI->AdjustMaxX; - MinY = pScreenInfo->virtualY - pATI->AdjustMaxY; - - pMode = pScreenInfo->modes; - do - { - if ((pMode->VDisplay <= MinY) && - ((pMode->VDisplay < MinY) || (pMode->HDisplay < MinX))) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Mode \"%s\" too small to scroll to bottom right corner of" - " virtual resolution.\n", pMode->name); - else if ((pMode->HDisplay & ~pATI->AdjustMask) / pScreenInfo->xInc) - xf86DrvMsg(pScreenInfo->scrnIndex, X_WARNING, - "Mode \"%s\" cannot scroll to bottom right corner of virtual" - " resolution.\n Horizontal dimension not a multiple of %d.\n", - pMode->name, ~pATI->AdjustMask + 1); - } while ((pMode = pMode->next) != pScreenInfo->modes); - - /* Initialise XVideo extension support */ - ATIXVPreInit(pATI); - - /* Initialise CRTC code */ - ATIModePreInit(pScreenInfo, pATI, &pATI->NewHW); - - /* Set up for I2C */ - ATII2CPreInit(pScreenInfo, pATI); - - if (!pScreenInfo->chipset || !*pScreenInfo->chipset) - pScreenInfo->chipset = (char *)ATIChipsetNames[0]; - - ATILock(pATI); - ATIPrintNoiseIfRequested(pATI, BIOS, BIOSSize); - ATIUnmapApertures(pScreenInfo->scrnIndex, pATI); - - return TRUE; -} |