summaryrefslogtreecommitdiff
path: root/src/gfx
diff options
context:
space:
mode:
Diffstat (limited to 'src/gfx')
-rw-r--r--src/gfx/disp_gu1.c10
-rw-r--r--src/gfx/disp_gu2.c12
-rw-r--r--src/gfx/gfx_disp.c4
-rw-r--r--src/gfx/gfx_init.c2
-rw-r--r--src/gfx/gfx_priv.h2
-rw-r--r--src/gfx/gfx_rtns.h4
-rw-r--r--src/gfx/gfx_vid.c2
-rw-r--r--src/gfx/msr_rdcl.c4
-rw-r--r--src/gfx/release.txt12
-rw-r--r--src/gfx/rndr_gu1.c2
-rw-r--r--src/gfx/rndr_gu2.c2
-rw-r--r--src/gfx/tv_fs450.c14
-rw-r--r--src/gfx/tv_fs450.h2
-rw-r--r--src/gfx/vid_1200.c4
-rw-r--r--src/gfx/vid_5530.c2
-rw-r--r--src/gfx/vid_rdcl.c2
16 files changed, 40 insertions, 40 deletions
diff --git a/src/gfx/disp_gu1.c b/src/gfx/disp_gu1.c
index 2cb1ed5..a03c754 100644
--- a/src/gfx/disp_gu1.c
+++ b/src/gfx/disp_gu1.c
@@ -789,11 +789,11 @@ gfx_set_display_offset(unsigned long offset)
WRITE_REG32(DC_UNLOCK, DC_UNLOCK_VALUE);
/* START ADDRESS EFFECTS DISPLAY COMPRESSION */
- /* Disable compression for non-zero start addresss values. */
- /* Enable compression if offset is zero and comression is intended to */
- /* be enabled from a previous call to "gfx_set_compression_enable". */
- /* Compression should be disabled BEFORE the offset is changed */
- /* and enabled AFTER the offset is changed. */
+ /* Disable compression for non-zero start address values. */
+ /* Enable compression if offset is zero and compression is intended to */
+ /* be enabled from a previous call to "gfx_set_compression_enable". */
+ /* Compression should be disabled BEFORE the offset is changed */
+ /* and enabled AFTER the offset is changed. */
if (offset == 0) {
WRITE_REG32(DC_FB_ST_OFFSET, offset);
if (gfx_compression_enabled) {
diff --git a/src/gfx/disp_gu2.c b/src/gfx/disp_gu2.c
index f105cc1..1f0bbb6 100644
--- a/src/gfx/disp_gu2.c
+++ b/src/gfx/disp_gu2.c
@@ -613,11 +613,11 @@ gfx_set_display_offset(unsigned long offset)
WRITE_REG32(MDC_UNLOCK, MDC_UNLOCK_VALUE);
/* START ADDRESS EFFECTS DISPLAY COMPRESSION */
- /* Disable compression for non-zero start addresss values. */
- /* Enable compression if offset is zero and comression is intended to */
- /* be enabled from a previous call to "gfx_set_compression_enable". */
- /* Compression should be disabled BEFORE the offset is changed */
- /* and enabled AFTER the offset is changed. */
+ /* Disable compression for non-zero start address values. */
+ /* Enable compression if offset is zero and compression is intended to */
+ /* be enabled from a previous call to "gfx_set_compression_enable". */
+ /* Compression should be disabled BEFORE the offset is changed */
+ /* and enabled AFTER the offset is changed. */
if (offset == 0) {
WRITE_REG32(MDC_FB_ST_OFFSET, offset);
if (gfx_compression_enabled) {
@@ -1100,7 +1100,7 @@ int
gfx_set_compression_enable(int enable)
#endif
{
- /* SET GLOBAL VARIABLE FOR INDENDED STATE */
+ /* SET GLOBAL VARIABLE FOR INTENDED STATE */
/* Compression can only be enabled for non-zero start address values. */
/* Keep state to enable compression on start address changes. */
diff --git a/src/gfx/gfx_disp.c b/src/gfx/gfx_disp.c
index 62238b2..5124d76 100644
--- a/src/gfx/gfx_disp.c
+++ b/src/gfx/gfx_disp.c
@@ -1802,7 +1802,7 @@ gfx_get_frame_buffer_line_size(void)
/*---------------------------------------------------------------------------
* gfx_get_display_mode
- * get the curent mode set,
+ * get the current mode set,
* return the supported mode on success, -1 on fail
*---------------------------------------------------------------------------
*/
@@ -1824,7 +1824,7 @@ gfx_get_display_mode(int *xres, int *yres, int *bpp, int *hz)
/*---------------------------------------------------------------------------
* gfx_get_display_details
- * given the mode get's the resoultion details, width, height, freq
+ * given the mode gets the resolution details, width, height, freq
*---------------------------------------------------------------------------
*/
int
diff --git a/src/gfx/gfx_init.c b/src/gfx/gfx_init.c
index 648d9cb..597eccf 100644
--- a/src/gfx/gfx_init.c
+++ b/src/gfx/gfx_init.c
@@ -149,7 +149,7 @@ gfx_detect_chip(void)
/*----------------------------------------------------------------------------
* gfx_detect_cpu
*
- * This routine returns the type and revison of the CPU. If a Geode
+ * This routine returns the type and revision of the CPU. If a Geode
* processor is not present, the routine returns zero.
*
* The return value is as follows:
diff --git a/src/gfx/gfx_priv.h b/src/gfx/gfx_priv.h
index 6a2218e..4f63f62 100644
--- a/src/gfx/gfx_priv.h
+++ b/src/gfx/gfx_priv.h
@@ -1011,7 +1011,7 @@ int fs450_set_color(int color);
int fs450_get_brightness(int *p_brightness);
int fs450_set_brightness(int brightness);
int fs450_get_contrast(int *p_contrast);
-int fs450_set_contrast(int constrast);
+int fs450_set_contrast(int contrast);
int fs450_get_yc_filter(unsigned int *p_yc_filter);
int fs450_set_yc_filter(unsigned int yc_filter);
int fs450_get_aps_trigger_bits(unsigned int *p_trigger_bits);
diff --git a/src/gfx/gfx_rtns.h b/src/gfx/gfx_rtns.h
index bfcfe9f..2087f21 100644
--- a/src/gfx/gfx_rtns.h
+++ b/src/gfx/gfx_rtns.h
@@ -63,7 +63,7 @@ extern "C" {
extern unsigned char *gfx_phys_spptr;
extern unsigned char *gfx_phys_gpptr;
-/* DURANGO VARIBLES FOR RUNTIME SELECTION AND POSSIBLE VALUES */
+/* DURANGO VARIABLES FOR RUNTIME SELECTION AND POSSIBLE VALUES */
extern int gfx_display_type;
#define GFX_DISPLAY_TYPE_GU1 0x0001
@@ -603,7 +603,7 @@ extern "C" {
int gfx_get_brightness(int *p_brightness);
int gfx_set_brightness(int brightness);
int gfx_get_contrast(int *p_contrast);
- int gfx_set_contrast(int constrast);
+ int gfx_set_contrast(int contrast);
int gfx_get_yc_filter(unsigned int *p_yc_filter);
int gfx_set_yc_filter(unsigned int yc_filter);
int gfx_get_aps_trigger_bits(unsigned int *p_trigger_bits);
diff --git a/src/gfx/gfx_vid.c b/src/gfx/gfx_vid.c
index 15f0048..0dd7847 100644
--- a/src/gfx/gfx_vid.c
+++ b/src/gfx/gfx_vid.c
@@ -159,7 +159,7 @@ int gfx_set_screen_enable(int enable); /* forward declaration
#include "vid_1200.c"
#endif
-/* INLUDE SUPPORT FOR REDCLOUD, IF SPECIFIED. */
+/* INCLUDE SUPPORT FOR REDCLOUD, IF SPECIFIED. */
#if GFX_VIDEO_REDCLOUD
#include "vid_rdcl.c"
diff --git a/src/gfx/msr_rdcl.c b/src/gfx/msr_rdcl.c
index 2f85e6a..1a01be7 100644
--- a/src/gfx/msr_rdcl.c
+++ b/src/gfx/msr_rdcl.c
@@ -437,8 +437,8 @@ redcloud_find_msr_device(MSR * pDev)
/*--------------------------------------------------------------------
* gfx_id_msr_device
*
- * This routine handles reading the capabilities MSR register (typically
- * 0x2000) and checking if the 'id' field matchs pDev.Id. This routine is
+ * This routine handles reading the capabilities MSR register (typically
+ * 0x2000) and checking if the 'id' field matches pDev.Id. This routine is
* used by applications/drivers that need to extend the list of known
* MBUS devices beyond those known by Durango.
*
diff --git a/src/gfx/release.txt b/src/gfx/release.txt
index 805b847..25f6803 100644
--- a/src/gfx/release.txt
+++ b/src/gfx/release.txt
@@ -333,7 +333,7 @@ FUNCTIONAL CHANGES
* Added support for 1152x864 desktop resolution on a flat panel.
* Added 24BPP support for large display modes.
* Modified gfx_set_video_scale such that an identity scale is now default.
-* Modifed flat panel modeset code to dynamically determine the size of the mode table.
+* Modified flat panel modeset code to dynamically determine the size of the mode table.
* Added support for Carmel Rev D2.
=============================================================================
@@ -462,7 +462,7 @@ FUNCTIONAL CHANGES
* Added functions gfx_enable_softvga, dfx_disable_softvga.
* Added code optimization in rendering loops to use 32 bit writes where possible.
* Added gfx_is_mode_supported to query if given mode supported by the h/w.
-* Added Flat panel support, realy testing with panel done only for 800x600.
+* Added Flat panel support, really testing with panel done only for 800x600.
* Removed subtraction of 16 from gfx_set_compression_size.
* Added version.h file to reflect the version of the durango used.
@@ -475,7 +475,7 @@ FUNCTIONAL CHANGES
-----------------------------------------------------------------------------
* Verified Xfree86 driver version 1.1 under FreeBSD and Linux.
* Added automatic detection of BLT buffer bases in "gfx_set_bpp" routine.
-* Fixed improper setting of VGA attrubute controller index register.
+* Fixed improper setting of VGA attribute controller index register.
* Moved "gfx_get_display_bpp" to always be included.
* Moved "gfx_get_hactive" and "gfx_get_vactive" to always be included.
* Clipped video source size if off bottom or right side.
@@ -503,7 +503,7 @@ FUNCTIONAL CHANGES
-----------------------------------------------------------------------------
* Verified display modes and graphics rendering on SC1200.
* Updated PLL table for SC1200 to set modes.
-* DURANGO.C FILE CHANGE!: Modifed and added compiler definitions.
+* DURANGO.C FILE CHANGE!: Modified and added compiler definitions.
* Split gfx_disp.c file into gu1_disp.c and gu2_disp.c
* Split gfx_rndr.c file into gu1_rndr.c and gu2_rndr.c
* Split gfx_vid.c file into vid_5530.c, vid_1400.c, and vid_1200.c
@@ -567,7 +567,7 @@ FUNCTIONAL CHANGES
-----------------------------------------------------------------------------
FUNCTIONAL CHANGES
-----------------------------------------------------------------------------
-* Added video port, video decoder, I2C, and hardware query rouines.
+* Added video port, video decoder, I2C, and hardware query routines.
* New files: gfx_vip.c, gfx_dcdr.c, gfx_i2c.c, gfx_read.c.
=============================================================================
@@ -581,7 +581,7 @@ FUNCTIONAL CHANGES
* Added "gfx_get_vid_register_base" and "gfx_get_vip_register_base".
* Added initial PLL table for SC1400.
* Verified mode set and video overlay routines work correctly on SC1400.
-* Updated initilization routines.
+* Updated initialization routines.
* Added update of graphics engine in "gfx_set_display_pitch".
=============================================================================
diff --git a/src/gfx/rndr_gu1.c b/src/gfx/rndr_gu1.c
index 57fe9b1..6c16c93 100644
--- a/src/gfx/rndr_gu1.c
+++ b/src/gfx/rndr_gu1.c
@@ -407,7 +407,7 @@ gfx_set_raster_operation(unsigned char rop)
GFXsavedRop = rop16;
/* SET FLAG INDICATING ROP REQUIRES DESTINATION DATA */
- /* True if even bits (0:2:4:6) do not equal the correspinding */
+ /* True if even bits (0:2:4:6) do not equal the corresponding */
/* even bits (1:3:5:7). */
GFXusesDstData = ((rop & 0x55) ^ ((rop >> 1) & 0x55));
diff --git a/src/gfx/rndr_gu2.c b/src/gfx/rndr_gu2.c
index a8126fb..ed327b3 100644
--- a/src/gfx/rndr_gu2.c
+++ b/src/gfx/rndr_gu2.c
@@ -137,7 +137,7 @@ gfx_set_bpp(unsigned short bpp)
{
GFXbpp = bpp;
- /* COVERT TO BPP/FORMAT VALUE */
+ /* CONVERT TO BPP/FORMAT VALUE */
/* Save in global to combine with ROP later. */
/* Could write register here and then use byte access for */
/* the ROP, but would need to set other 24 bits to make */
diff --git a/src/gfx/tv_fs450.c b/src/gfx/tv_fs450.c
index 24e7446..99194b2 100644
--- a/src/gfx/tv_fs450.c
+++ b/src/gfx/tv_fs450.c
@@ -78,8 +78,8 @@ const S_SET_DESCRIP *gcc_regs(void);
#define HOUSTON_IHO 0x00 /* Input Horizontal Offset */
#define HOUSTON_IVO 0x02 /* Input Vertical Offset */
#define HOUSTON_IHA 0x04 /* Input Horizontal Active Width */
-#define HOUSTON_VSC 0x06 /* Vertical Scaling Coeficient */
-#define HOUSTON_HSC 0x08 /* Horizontal Scaling Coeficient */
+#define HOUSTON_VSC 0x06 /* Vertical Scaling Coefficient */
+#define HOUSTON_HSC 0x08 /* Horizontal Scaling Coefficient */
#define HOUSTON_BYP 0x0A /* Bypass Register */
#define HOUSTON_CR 0x0C /* Control Register */
#define HOUSTON_SP 0x0E /* Status */
@@ -1027,7 +1027,7 @@ gfx_set_tv_enable(int on)
/*if turning off... */
if (!on) {
- /*reenable vga. */
+ /*re-enable vga. */
PLAL_EnableVga();
/*power down houston */
@@ -1477,13 +1477,13 @@ gfx_get_contrast(int *p_contrast)
#if GFX_TV_DYNAMIC
int
-fs450_set_contrast(int constrast)
+fs450_set_contrast(int contrast)
#else
int
-gfx_set_contrast(int constrast)
+gfx_set_contrast(int contrast)
#endif
{
- d.contrast = range_limit(constrast, 0, 100);
+ d.contrast = range_limit(contrast, 0, 100);
return write_config(REQ_BRIGHTNESS_CONTRAST);
}
@@ -3239,7 +3239,7 @@ PLAL_SetTVTimingRegisters(const S_TIMING_SPECS * p_specs)
reg = ((p_specs->v_sync - 1) << 16) | (p_specs->v_sync - 2);
WriteGx(DC_FP_V_TIMING, reg);
- /*timing config, reenable all dclk stuff. */
+ /*timing config, re-enable all dclk stuff. */
reg = ReadGx(DC_TIMING_CFG);
reg |= GX_TGEN;
WriteGx(DC_TIMING_CFG, reg);
diff --git a/src/gfx/tv_fs450.h b/src/gfx/tv_fs450.h
index 4da7a21..1d01cff 100644
--- a/src/gfx/tv_fs450.h
+++ b/src/gfx/tv_fs450.h
@@ -131,7 +131,7 @@ extern "C" {
/* brightness is a percentage, 0 to 100 */
int FS450_get_contrast(int *p_contrast);
- int FS450_set_contrast(int constrast);
+ int FS450_set_contrast(int contrast);
/* contrast is a percentage, 0 to 100 */
/*==========================================================================*/
diff --git a/src/gfx/vid_1200.c b/src/gfx/vid_1200.c
index abc1b54..3e6c023 100644
--- a/src/gfx/vid_1200.c
+++ b/src/gfx/vid_1200.c
@@ -1044,7 +1044,7 @@ gfx_set_video_palette_entry(unsigned long index, unsigned long palette)
/*---------------------------------------------------------------------------
* gfx_set_video_palette_bypass
*
- * This routine enables/disables the pallete RAM bypass.
+ * This routine enables/disables the palette RAM bypass.
*---------------------------------------------------------------------------
*/
#if GFX_VIDEO_DYNAMIC
@@ -2045,7 +2045,7 @@ gfx_get_video_src_size(void)
if (width) {
/* DETERMINE HEIGHT BY DIVIDING TOTAL SIZE BY WIDTH */
- /* Get total size from display controller - abtracted. */
+ /* Get total size from display controller - abstracted. */
height = gfx_get_display_video_size() / (width << 1);
}
diff --git a/src/gfx/vid_5530.c b/src/gfx/vid_5530.c
index f524300..8442dfb 100644
--- a/src/gfx/vid_5530.c
+++ b/src/gfx/vid_5530.c
@@ -1086,7 +1086,7 @@ gfx_get_video_src_size(void)
if (width) {
/* DETERMINE HEIGHT BY DIVIDING TOTAL SIZE BY WIDTH */
- /* Get total size from display controller - abtracted. */
+ /* Get total size from display controller - abstracted. */
height = gfx_get_display_video_size() / (width << 1);
}
diff --git a/src/gfx/vid_rdcl.c b/src/gfx/vid_rdcl.c
index 3ccc57a..72f45d4 100644
--- a/src/gfx/vid_rdcl.c
+++ b/src/gfx/vid_rdcl.c
@@ -1251,7 +1251,7 @@ gfx_set_video_palette_entry(unsigned long index, unsigned long palette)
/*---------------------------------------------------------------------------
* gfx_set_video_palette_bypass
*
- * This routine enables/disables the pallete RAM bypass.
+ * This routine enables/disables the palette RAM bypass.
*---------------------------------------------------------------------------
*/
#if GFX_VIDEO_DYNAMIC
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 10:24:16 +0000