Update man page

Add example dual head config, add info on bug reporting.

1 files changed, 56 insertions, 9 deletions

diff --git a/man/intel.man b/man/intel.man
index aac0efa6..f363ab1b 100644
--- a/man/intel.man
+++ b/man/intel.man
@@ -33,10 +33,10 @@ details.  This section only covers configuration details specific to this
 driver.
 .PP
 The Intel 8xx and 9xx families of integrated graphics chipsets have a unified
-memory architecture and uses system memory for video ram.  For the i810 and
-i815 family of chipset, operating system support for allocating system
-memory for video use is required in order to use this driver.  For the 830M
-and later, this is required in order for the driver to use more video ram
+memory architecture meaning that system memory is used as video RAM.  For the
+i810 and i815 family of chipsets, operating system support for allocating system
+memory is required in order to use this driver.  For the 830M
+and later, this is required in order for the driver to use more video RAM
 than has been pre-allocated at boot time by the BIOS.  This is usually
 achieved with an "agpgart" or "agp" kernel driver.  Linux, FreeBSD, OpenBSD,
 NetBSD, and Solaris have such kernel drivers available.
@@ -44,7 +44,7 @@ NetBSD, and Solaris have such kernel drivers available.
 By default, the i810 will use 8 megabytes
 of system memory for graphics.  For the 830M and later, the driver will
 automatically size its memory allocation according to the features it will
-support.  The
+support.  Therefore, the
 .B VideoRam
 option, which in the past had been necessary to allow more than some small
 amount of memory to be allocated, is now ignored.
@@ -84,7 +84,8 @@ Default: enabled on supported configurations.
 .TP
 .BI "Option \*qTiling\*q \*q" boolean \*q
 This option controls whether memory buffers are allocated in tiled mode.  In
-many cases (especially for complex rendering), tiling can improve performance.
+most cases (especially for complex rendering), tiling dramatically improves
+performance.
 Default: enabled.
 .TP
 .BI "Option \*qDRI\*q \*q" boolean \*q
@@ -180,8 +181,7 @@ the server log.
 Force the driver to leave pipe A enabled.  May be necessary in configurations
 where the BIOS accesses pipe registers during display hotswitch or lid close,
 causing a crash.  If you find that your platform needs this option, please file
-a bug against xf86-video-intel at http://bugs.freedesktop.org which includes
-the output of 'lspci -v' and 'lspci -vn'.
+a bug (see REPORTING BUGS below) including the output of 'lspci -v' and 'lspci -vn'.
 .TP
 .BI "Option \*qLVDS24Bit\*q \*q" boolean \*q
 Specify 24 bit pixel format (i.e. 8 bits per color) to be used for the
@@ -220,7 +220,7 @@ detected outputs.  You can use the
 .B xrandr
 tool to control outputs on the command line.  Each output listed below may have
 one or more properties associated with it (like a binary EDID block if one is
-found).  Some outputs have unique properties which are described below.
+found).  Some outputs have unique properties which are described below.  See the "MULTIHEAD CONFIGURATIONS" section below for additional information.
 
 .SS "VGA"
 VGA output port (typically exposed via an HD15 connector).
@@ -382,6 +382,53 @@ what is needed.  Set LVDSFixedMode to false and then the user has full
 control over the resolution and timings sent to the LVDS-connected
 device, through the usual means in xorg.
 
+.SH MUTLIHEAD CONFIGURATIONS
+
+The number of independent outputs is dicated by the number of CRTCs
+(in X parlance) a given chip supports.  Most recent Intel chips have
+two CRTCs, meaning that two separate framebuffers can be displayed
+simultaneously, in an extended desktop configuration.  If a chip
+supports more outputs than it has CRTCs (say local flat panel, VGA and
+TV in the case of many outputs), two of the outputs will have to be
+"cloned", meaning that they display the same framebuffer contents (or
+one displays a subset of another's framebuffer if the modes aren't
+equal).
+
+You can use the "xrandr" tool, or various desktop utilities, to change
+your output configuration at runtime.  To statically configure your
+outputs, you can use the "Monitor-<type>" options along with
+additional monitor sections in your xorg.conf to create your screen
+topology.  The example below puts the VGA output to the right of the
+builtin laptop screen, both running at 1024x768.
+
+.nf
+.B "Section \*qMonitor\*q"
+.BI "  Identifier \*qLaptop FooBar Internal Display\*q"
+.BI "  Option \*qPosition\*q \*q0 0\*q"
+.B "EndSection"
+
+.B "Section \*qMonitor\*q"
+.BI "  Identifier \*qSome Random CRT\*q"
+.BI "  Option \*qPosition\*q \*q1024 0\*q"
+.BI "  Option \*qRightOf\*q \*qLaptop FoodBar Internal Display\*q"
+.B "EndSection"
+
+.B "Section \*qDevice\*q"
+.BI "  Driver \*qintel\*q"
+.BI "  Option \*qmonitor-LVDS\*q \*qLaptop FooBar Internal Display\*q"
+.BI "  Option \*qmonitor-VGA\*q \*qSome Random CRT\*q"
+.B "EndSection"
+
+.SH REPORTING BUGS
+
+The xf86-video-intel driver is part of the X.Org and Freedesktop.org
+umbrella projects.  Details on bug reporting can be found at
+http://www.intellinuxgraphics.org/how_to_report_bug.html.  Mailing
+lists are also commonly used to report experiences and ask questions
+about configuration and other topics.  See lists.freedesktop.org for
+more information (the xorg@lists.freedesktop.org mailing list is the
+most appropriate place to ask X.Org and driver related questions).
+
 .SH "SEE ALSO"
 __xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), xorgconfig(__appmansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__)
 .SH AUTHORS