diff options
Diffstat (limited to 'man')
| -rw-r--r-- | man/intel.man | 65 |
1 files changed, 56 insertions, 9 deletions
diff --git a/man/intel.man b/man/intel.man index aac0efa6..f363ab1b 100644 --- a/man/intel.man +++ b/man/intel.man @@ -33,10 +33,10 @@ details. This section only covers configuration details specific to this driver. .PP The Intel 8xx and 9xx families of integrated graphics chipsets have a unified -memory architecture and uses system memory for video ram. For the i810 and -i815 family of chipset, operating system support for allocating system -memory for video use is required in order to use this driver. For the 830M -and later, this is required in order for the driver to use more video ram +memory architecture meaning that system memory is used as video RAM. For the +i810 and i815 family of chipsets, operating system support for allocating system +memory is required in order to use this driver. For the 830M +and later, this is required in order for the driver to use more video RAM than has been pre-allocated at boot time by the BIOS. This is usually achieved with an "agpgart" or "agp" kernel driver. Linux, FreeBSD, OpenBSD, NetBSD, and Solaris have such kernel drivers available. @@ -44,7 +44,7 @@ NetBSD, and Solaris have such kernel drivers available. By default, the i810 will use 8 megabytes of system memory for graphics. For the 830M and later, the driver will automatically size its memory allocation according to the features it will -support. The +support. Therefore, the .B VideoRam option, which in the past had been necessary to allow more than some small amount of memory to be allocated, is now ignored. @@ -84,7 +84,8 @@ Default: enabled on supported configurations. .TP .BI "Option \*qTiling\*q \*q" boolean \*q This option controls whether memory buffers are allocated in tiled mode. In -many cases (especially for complex rendering), tiling can improve performance. +most cases (especially for complex rendering), tiling dramatically improves +performance. Default: enabled. .TP .BI "Option \*qDRI\*q \*q" boolean \*q @@ -180,8 +181,7 @@ the server log. Force the driver to leave pipe A enabled. May be necessary in configurations where the BIOS accesses pipe registers during display hotswitch or lid close, causing a crash. If you find that your platform needs this option, please file -a bug against xf86-video-intel at http://bugs.freedesktop.org which includes -the output of 'lspci -v' and 'lspci -vn'. +a bug (see REPORTING BUGS below) including the output of 'lspci -v' and 'lspci -vn'. .TP .BI "Option \*qLVDS24Bit\*q \*q" boolean \*q Specify 24 bit pixel format (i.e. 8 bits per color) to be used for the @@ -220,7 +220,7 @@ detected outputs. You can use the .B xrandr tool to control outputs on the command line. Each output listed below may have one or more properties associated with it (like a binary EDID block if one is -found). Some outputs have unique properties which are described below. +found). Some outputs have unique properties which are described below. See the "MULTIHEAD CONFIGURATIONS" section below for additional information. .SS "VGA" VGA output port (typically exposed via an HD15 connector). @@ -382,6 +382,53 @@ what is needed. Set LVDSFixedMode to false and then the user has full control over the resolution and timings sent to the LVDS-connected device, through the usual means in xorg. +.SH MUTLIHEAD CONFIGURATIONS + +The number of independent outputs is dicated by the number of CRTCs +(in X parlance) a given chip supports. Most recent Intel chips have +two CRTCs, meaning that two separate framebuffers can be displayed +simultaneously, in an extended desktop configuration. If a chip +supports more outputs than it has CRTCs (say local flat panel, VGA and +TV in the case of many outputs), two of the outputs will have to be +"cloned", meaning that they display the same framebuffer contents (or +one displays a subset of another's framebuffer if the modes aren't +equal). + +You can use the "xrandr" tool, or various desktop utilities, to change +your output configuration at runtime. To statically configure your +outputs, you can use the "Monitor-<type>" options along with +additional monitor sections in your xorg.conf to create your screen +topology. The example below puts the VGA output to the right of the +builtin laptop screen, both running at 1024x768. + +.nf +.B "Section \*qMonitor\*q" +.BI " Identifier \*qLaptop FooBar Internal Display\*q" +.BI " Option \*qPosition\*q \*q0 0\*q" +.B "EndSection" + +.B "Section \*qMonitor\*q" +.BI " Identifier \*qSome Random CRT\*q" +.BI " Option \*qPosition\*q \*q1024 0\*q" +.BI " Option \*qRightOf\*q \*qLaptop FoodBar Internal Display\*q" +.B "EndSection" + +.B "Section \*qDevice\*q" +.BI " Driver \*qintel\*q" +.BI " Option \*qmonitor-LVDS\*q \*qLaptop FooBar Internal Display\*q" +.BI " Option \*qmonitor-VGA\*q \*qSome Random CRT\*q" +.B "EndSection" + +.SH REPORTING BUGS + +The xf86-video-intel driver is part of the X.Org and Freedesktop.org +umbrella projects. Details on bug reporting can be found at +http://www.intellinuxgraphics.org/how_to_report_bug.html. Mailing +lists are also commonly used to report experiences and ask questions +about configuration and other topics. See lists.freedesktop.org for +more information (the xorg@lists.freedesktop.org mailing list is the +most appropriate place to ask X.Org and driver related questions). + .SH "SEE ALSO" __xservername__(__appmansuffix__), __xconfigfile__(__filemansuffix__), xorgconfig(__appmansuffix__), Xserver(__appmansuffix__), X(__miscmansuffix__) .SH AUTHORS |