DRI trunk-20040721 importDRI-trunk-20040721import-1.1.3

3 files changed, 0 insertions, 588 deletions

diff --git a/man/ati.man b/man/ati.man
deleted file mode 100644
index abd7da3..0000000
--- a/man/ati.man
+++ /dev/null
@@ -1,30 +0,0 @@
-.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/ati.man,v 1.2 2001/01/27 18:20:46 dawes Exp $ 
-.\" shorthand for double quote that works everywhere.
-.ds q \N'34'
-.TH ATI __drivermansuffix__ __vendorversion__
-.SH NAME
-ati \- ATI video driver
-.SH SYNOPSIS
-.nf
-.B "Section \*qDevice\*q"
-.BI "  Identifier \*q"  devname \*q
-.B  "  Driver \*qati\*q"
-\ \ ...
-.B EndSection
-.fi
-.SH DESCRIPTION
-.B ati
-is an XFree86 driver for ATI video cards.
-THIS MAN PAGE NEEDS TO BE FILLED IN.
-.SH SUPPORTED HARDWARE
-The
-.B ati
-driver supports...
-.SH CONFIGURATION DETAILS
-Please refer to XF86Config(__filemansuffix__) for general configuration
-details.  This section only covers configuration details specific to this
-driver.
-.SH "SEE ALSO"
-XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__)
-.SH AUTHORS
-Authors include: ...
diff --git a/man/r128.man b/man/r128.man
deleted file mode 100644
index 0bb990a..0000000
--- a/man/r128.man
+++ /dev/null
@@ -1,132 +0,0 @@
-.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/r128.man,v 1.4 2002/06/04 23:04:50 dawes Exp $
-.\" shorthand for double quote that works everywhere.
-.ds q \N'34'
-.TH R128 __drivermansuffix__ __vendorversion__
-.SH NAME
-r128 \- ATI Rage 128 video driver
-.SH SYNOPSIS
-.nf
-.B "Section \*qDevice\*q"
-.BI "  Identifier \*q"  devname \*q
-.B  "  Driver \*qr128\*q"
-\ \ ...
-.B EndSection
-.fi
-.SH DESCRIPTION
-.B r128
-is an XFree86 driver for ATI Rage 128 based video cards.  It contains
-full support for 8, 15, 16 and 24 bit pixel depths, hardware
-acceleration of drawing primitives, hardware cursor, video modes up to
-1800x1440 @ 70Hz, doublescan modes (e.g., 320x200 and 320x240), gamma
-correction at all pixel depths, a fully programming dot clock and robust
-text mode restoration for VT switching.
-.SH SUPPORTED HARDWARE
-The
-.B r128
-driver supports all ATI Rage 128 based video cards including the Rage
-Fury AGP 32MB, the XPERT 128 AGP 16MB and the XPERT 99 AGP 8MB.
-.SH CONFIGURATION DETAILS
-Please refer to XF86Config(__filemansuffix__) for general configuration
-details.  This section only covers configuration details specific to this
-driver.
-.PP
-The driver auto-detects all device information necessary to initialize
-the card.  However, if you have problems with auto-detection, you can
-specify:
-.PP
-.RS 4
-VideoRam - in kilobytes
-.br
-MemBase  - physical address of the linear framebuffer
-.br
-IOBase   - physical address of the MMIO registers
-.br
-ChipID   - PCI DEVICE ID
-.RE
-.PP
-In addition, the following driver
-.B Options
-are supported:
-.TP
-.BI "Option \*qSWcursor\*q \*q" boolean \*q
-Selects software cursor.  The default is
-.B off.
-.TP
-.BI "Option \*qNoAccel\*q \*q" boolean \*q
-Enables or disables all hardware acceleration.  The default is to
-.B enable
-hardware acceleration.
-.TP
-.BI "Option \*qDac6Bit\*q \*q" boolean \*q
-Enables or disables the use of 6 bits per color component when in 8 bpp
-mode (emulates VGA mode).  By default, all 8 bits per color component
-are used.  The default is
-.B off.
-.TP
-.BI "Option \*qVideoKey\*q \*q" integer \*q
-This overrides the default pixel value for the YUV video overlay key.
-The default value is
-.B undefined.
-.TP
-.BI "Option \*qDisplay\*q \*q" string \*q
-Select display mode for devices which support flat panels. Supported modes are:
-
-.B \*qFP\*q
-- use flat panel;
-
-.B \*qCRT\*q
-- use cathode ray tube;
-
-.B \*qMirror\*q
-- use both FP and CRT;
-
-.B \*qBIOS\*q
-- use mode as configured in the BIOS.
-
-The default is
-.B FP.
-
-.PP
-The following
-.B Options
-are mostly important for non-x86 architectures:
-.TP
-.BI "Option \*qProgramFPRegs\*q \*q" boolean \*q
-Enable or disable programming of the flat panel registers.
-Beware that this may damage your panel, so use this
-.B at your own risk.
-The default depends on the device.
-.TP
-.BI "Option \*qPanelWidth\*q \*q" integer \*q
-.TP
-.BI "Option \*qPanelHeight\*q \*q" integer \*q
-Override the flat panel dimensions in pixels. They are used to program the flat panel
-registers and normally determined using the video card BIOS. If the wrong dimensions
-are used, the system may hang.
-.TP
-.BI "Option \*qUseFBDev\*q \*q" boolean \*q
-Enable or disable use of an OS-specific framebuffer device interface
-(which is not supported on all OSs).  See fbdevhw(__drivermansuffix__)
-for further information.
-Default: off.
-.TP
-.BI "Option \*qDMAForXv\*q \*q" boolean \*q
-Try or don't try to use DMA for Xv image transfers. This will reduce CPU
-usage when playing big videos like DVDs, but may cause instabilities.
-Default: off.
-
-.PP
-The following additional
-.B Options
-are supported:
-.TP
-.BI "Option \*qShowCache\*q \*q" boolean \*q
-Enable or disable viewing offscreen cache memory.  A
-development debug option.  Default: off.
-
-.SH "SEE ALSO"
-XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__)
-.SH AUTHORS
-.nf
-Rickard E. (Rik) Faith   \fIfaith@precisioninsight.com\fP
-Kevin E. Martin          \fIkevin@precisioninsight.com\fP
diff --git a/man/radeon.man b/man/radeon.man
deleted file mode 100644
index 0a11d53..0000000
--- a/man/radeon.man
+++ /dev/null
@@ -1,426 +0,0 @@
-.\" $XFree86: xc/programs/Xserver/hw/xfree86/drivers/ati/radeon.man,v 1.0 2003/01/31 23:04:50
-.ds q \N'34'
-.TH RADEON __drivermansuffix__ __vendorversion__
-.SH NAME
-radeon \- ATI RADEON video driver
-.SH SYNOPSIS
-.nf 
-.B "Section \*qDevice\*q"
-.BI "  Identifier \*q"  devname \*q
-.B  "  Driver \*qradeon\*q"
-\ \ ...
-.B EndSection
-.fi 
-.SH DESCRIPTION
-.B radeon
-is a XFree86 driver for ATI RADEON based video cards.  It contains
-full support for 8, 15, 16 and 24 bit pixel depths, dual-head setup, 
-flat panel, hardware 2D acceleration, hardware 3D acceleration 
-(except R300 series cards), hardware cursor, XV extension, Xinerama extension.
-.SH SUPPORTED HARDWARE
-The
-.B radeon
-driver supports PCI and AGP video cards based on the following ATI chips
-.TP 12
-.B R100
-Radeon 7200
-.TP 12
-.B RV100
-Radeon 7000(VE), M6
-.TP 12
-.B RS100
-Radeon IGP320(M)
-.TP 12
-.B RV200
-Radeon 7500, M7, FireGL 7800
-.TP 12
-.B RS200
-Radeon IGP330(M)/IGP340(M)
-.TP 12
-.B RS250
-Radeon Mobility 7000 IGP
-.TP 12
-.B R200
-Radeon 8500, 9100, FireGL 8800/8700
-.TP 12
-.B RV250
-Radeon 9000PRO/9000, M9
-.TP 12
-.B RS300
-Radeon 9100 IGP
-.TP 12
-.B RV280
-Radeon 9200PRO/9200/9200SE, M9+
-.TP 12
-.B R300
-Radeon 9700PRO/9700/9500PRO/9500/9600TX, FireGL X1/Z1 (2D only)
-.TP 12
-.B R350
-Radeon 9800PRO/9800SE/9800, FireGL X2 (2D only)
-.TP 12
-.B R360
-Radeon 9800XT (2d only)
-.TP 12
-.B RV350
-Radeon 9600PRO/9600SE/9600, M10/M11, FireGL T2 (2D only)
-.TP 12
-.B RV360 
-Radeon 9600XT (2d only)
-
-.SH CONFIGURATION DETAILS
-Please refer to XF86Config(__filemansuffix__) for general configuration
-details.  This section only covers configuration details specific to this
-driver.
-.PP 
-The driver auto\-detects all device information necessary to initialize
-the card.  However, if you have problems with auto\-detection, you can
-specify:
-.PP 
-.RS 4
-VideoRam \- in kilobytes
-.br 
-MemBase  \- physical address of the linear framebuffer
-.br 
-IOBase   \- physical address of the MMIO registers
-.br 
-ChipID   \- PCI DEVICE ID
-.RE
-.PP 
-In addition, the following driver
-.B Options
-are supported:
-.TP 
-.BI "Option \*qSWcursor\*q \*q" boolean \*q
-Selects software cursor.  The default is
-.B off.
-.TP 
-.BI "Option \*qNoAccel\*q \*q" boolean \*q
-Enables or disables all hardware acceleration.  
-.br
-The default is to
-.B enable
-hardware acceleration.
-.TP 
-.BI "Option \*qDac6Bit\*q \*q" boolean \*q
-Enables or disables the use of 6 bits per color component when in 8 bpp
-mode (emulates VGA mode).  By default, all 8 bits per color component
-are used.  
-.br
-The default is
-.B off.
-.TP 
-.BI "Option \*qVideoKey\*q \*q" integer \*q
-This overrides the default pixel value for the YUV video overlay key.
-.br
-The default value is
-.B 0x1E.
-.TP 
-.BI "Option \*qUseFBDev\*q \*q" boolean \*q
-Enable or disable use of an OS\-specific framebuffer device interface
-(which is not supported on all OSs).  MergedFB does not work when this
-option is in use.  See fbdevhw(__drivermansuffix__) for further information. 
-.br
-The default is
-.B off.
-.TP 
-.BI "Option \*qAGPMode\*q \*q" integer \*q
-Set AGP data transfer rate.
-(used only when DRI is enabled)
-.br
-1      \-\- x1 (default)
-.br
-2      \-\- x2
-.br
-4      \-\- x4
-.br
-others \-\- invalid
-.TP 
-.BI "Option \*qAGPFastWrite\*q \*q" boolean \*q
-Enable AGP fast write.
-.br
-(used only when DRI is enabled)
-.br
-The default is
-.B off.
-.TP 
-.BI "Option \*qBusType\*q \*q" string \*q
-Used to replace previous ForcePCIMode option.
-Should only be used when driver's bus detection is incorrect
-or you want to force a AGP card to PCI mode. Should NEVER force
-a PCI card to AGP bus.
-.br
-PCI    \-\- PCI bus
-.br
-AGP    \-\- AGP bus
-.br
-PCIE   \-\- PCI Express (falls back to PCI at present)
-.br
-(used only when DRI is enabled)
-.br
-The default is
-.B auto detect.
-.TP 
-.BI "Option \*qDDCMode\*q \*q" boolean \*q
-Force to use the modes queried from the connected monitor.
-.br
-The default is
-.B off.
-.TP 
-.BI "Option \*qDisplayPriority\*q \*q" string \*q
-.br 
-Used to prevent flickering or tearing problem caused by display buffer underflow.
-.br 
-AUTO   \-\- Driver calculated (default).
-.br 
-BIOS   \-\- Remain unchanged from BIOS setting.
-          Use this if the calculation is not correct 
-          for your card.
-.br 
-HIGH   \-\- Force to the highest priority. 
-          Use this if you have problem with above options.
-          This may affect performance slightly.
-.br 
-The default value is
-.B AUTO.
-.TP 
-.BI "Option \*qMonitorLayout\*q \*q" string \*q
-.br 
-This option is used to overwrite the detected monitor types.
-This is only required when driver makes a false detection.
-The possible monitor types are:
-.br 
-NONE   \-\- Not connected
-.br 
-CRT    \-\- Analog CRT monitor
-.br 
-TMDS   \-\- Desktop flat panel
-.br 
-LVDS   \-\- Laptop flat panel
-.br
-This option can be used in following format:
-.br
-Option "MonitorLayout" "[type on primary], [type on secondary]"
-.br
-For example, Option "MonitorLayout" "CRT, TMDS"
-
-Primary/Secondary head for dual\-head cards:
-.br 
-(when only one port is used, it will be treated as the primary regardless)
-.br 
-.B Primary head:
-.br 
-DVI port on DVI+VGA cards
-.br 
-LCD output on laptops
-.br 
-Internal TMDS port on DVI+DVI cards
-.br 
-.B Secondary head:
-.br 
-VGA port on DVI+VGA cards
-.br 
-VGA port on laptops
-.br 
-External TMDS port on DVI+DVI cards
-
-The default value is
-.B undefined.
-.TP 
-.BI "Option \*qMergedFB\*q \*q" boolean \*q
-This enables merged framebuffer mode.  In this mode you have a single 
-shared framebuffer with two viewports looking into it.  It is similar
-to Xinerama, but has some advantages.  It is faster than Xinerama, the
-DRI works on both heads, and it supports clone modes.  
-.br
-Merged framebuffer mode provides two linked viewports looking into a
-single large shared framebuffer.  The size of the framebuffer is 
-determined by the
-.B Virtual
-keyword defined on the
-.B Screen
-section of your XF86Config file.  It works just like regular virtual
-desktop except you have two viewports looking into it instead of one.
-.br
-For example, if you wanted a desktop composed of two 1024x768 viewports
-looking into a single desktop you would create a virtual desktop of 
-2048x768 (left/right) or 1024x1536 (above/below), e.g.,
-.br
-.B Virtual 2048 768
-or
-.B Virtual 1024 1536
-.br
-The virtual desktop can be larger than larger than the size of the viewports
-looking into it.  In this case the linked viewports will scroll around in the 
-virtual desktop.  Viewports with different sizes are also supported (e.g., one
-that is 1024x768 and one that is 640x480).  In this case the smaller viewport
-will scroll relative to the larger one such that none of the virtual desktop 
-is inaccessable.  If you do not define a virtual desktop the driver will create
-one based on the orientation of the heads and size of the largest defined mode in 
-the display section that is supported on each head.
-.br
-The relation of the viewports in specified by the
-.B CRT2Position
-Option.  The options are
-.B Clone
-,
-.B LeftOf
-,
-.B RightOf
-,
-.B Above
-, and
-.B Below.  
-MergedFB is enabled by default if a monitor is detected on each output.  If 
-no position is given it defaults to clone mode (the old clone options are now 
-deprecated, also, the option OverlayOnCRTC2 has been replaced by the Xv 
-attribute XV_SWITCHCRT; the overlay can be switched to CRT1 or CRT2 on the fly 
-in clone mode).
-.br
-The maximum framebuffer size that the 2D acceleration engine can handle is 
-8192x8192.  The maximum framebuffer size that the 3D engine can handle is 
-2048x2048.
-.br
-.B Note:
-Page flipping does not work well in certain configurations with MergedFB.  If you 
-see rendering errors or other strange behavior, disable page flipping. Also MergedFB
-is not compatible with the 
-.B UseFBDev 
-option.
-.br
-The default value is
-.B undefined.
-.TP 
-.BI "Option \*qCRT2HSync\*q \*q" "string" \*q
-Set the horizontal sync range for the secondary  monitor. 
-It is not required if a DDC\-capable monitor is connected.
-.br
-For example, Option "CRT2HSync" "30.0-86.0"
-.br
-The default value is
-.B undefined.
-.TP 
-.BI "Option \*qCRT2VRefresh\*q \*q" "string" \*q
-Set the vertical refresh range for the secondary monitor.
-It is not required if a DDC\-capable monitor is connected.
-.br
-For example, Option "CRT2VRefresh" "50.0-120.0"
-.br
-The default value is
-.B undefined.
-.TP
-.BI "Option \*qCRT2Position\*q \*q" "string" \*q
-Set the relationship of CRT2 relative to CRT1. Valid options are: 
-.B Clone
-,
-.B LeftOf
-,
-.B RightOf
-,
-.B Above
-, and
-.B Below
-.
-.br
-For example, Option "CRT2Position" "RightOf"
-.br
-The default value is
-.B Clone.
-.TP
-.BI "Option \*qMetaModes\*q \*q" "string" \*q
-MetaModes are mode combinations for CRT1 and CRT2.  If you are using merged
-frame buffer mode and want to change modes (CTRL-ALT-+/-), these define which
-modes will be switched to on CRT1 and CRT2.  The MetaModes are defined as 
-CRT1Mode-CRT2Mode (800x600-1024x768).  Modes listed individually (800x600) 
-define clone modes, that way you can mix clone modes with non-clone modes.
-Also some programs require "standard" modes.  
-.br
-Note:  Any mode you use in the MetaModes must be defined in the
-.B Screen 
-section of your XF86Config file.  Modes not defined there will be ignored when
-the MetaModes are parsed since the driver uses them to make sure the monitors can 
-handle those modes.  If you do not define a MetaMode the driver will create
-one based on the orientation of the heads and size of the largest defined mode in 
-the display section that is supported on each head.
-.br
-.B Modes "1024x768" "800x600" "640x480"
-.br
-For example, Option "MetaModes" "1024x768-1024x768 800x600-1024x768 640x480-800x600 800x600"
-.br
-The default value is
-.B undefined.
-.TP 
-.BI "Option \*qNoMergedXinerama\*q \*q" boolean \*q
-Since merged framebuffer mode does not use Xinerama, apps are not able to intelligently
-place windows.  Merged framebuffer mode provides its own pseudo-Xinerama.  This allows
-Xinerama compliant applications to place windows appropriately.  There are some caveats.
-Since merged framebuffer mode is able to change relative screen sizes and orientations on
-the fly, as well has having overlapping viewports, pseudo-Xinerama, might not always 
-provide the right hints.  Also many Xinerama compliant applications only query Xinerama
-once at startup; if the information changes, they may not be aware of the change.  If
-you are already using Xinerama (e.g., a single head card and a dualhead card providing
-three heads), pseudo-Xinerama will be disabled.
-.br
-This option allows you turn off the driver provided pseudo-Xinerama extension.
-.br
-The default value is
-.B FALSE.
-.TP 
-.BI "Option \*qMergedXineramaCRT2IsScreen0\*q \*q" boolean \*q
-By default the pseudo-Xinerama provided by the driver makes the left-most or bottom
-head Xinerama screen 0.  Certain Xinerama-aware applications do special things with 
-screen 0.  To change that behavior, use this option.
-.br
-The default value is
-.B undefined.
-.TP
-.BI "Option \*qMergedDPI\*q \*q" "string" \*q
-The driver will attempt to figure out an appropriate DPI based on the DDC information
-and the orientation of the heads when in merged framebuffer mode.  If this value does 
-not suit you, you can manually set the DPI using this option.
-.br
-For example, Option "MergedDPI" "100 100"
-.br
-The default value is
-.B undefined.
-.TP 
-.BI "Option \*qIgnoreEDID\*q \*q" boolean \*q
-Do not use EDID data for mode validation, but DDC is still used
-for monitor detection. This is different from NoDDC option.  
-.br
-The default value is
-.B off.
-.TP 
-.BI "Option \*qPanelSize\*q \*q" "string" \*q
-Should only be used when driver cannot detect the correct panel size.
-Apply to both desktop (TMDS) and laptop (LVDS) digital panels.
-When a valid panel size is specified, the timings collected from
-DDC and BIOS will not be used. If you have a panel with timings 
-different from that of a standard VESA mode, you have to provide
-this information through the Modeline.
-.br
-For example, Option "PanelSize" "1400x1050"
-.br
-The default value is
-.B none.
-.TP 
-.BI "Option \*qPanelOff\*q \*q" boolean \*q
-Disable panel output.
-.br
-The default value is
-.B off.
-.TP 
-.BI "Option \*qEnablePageFlip\*q \*q" boolean \*q
-Enable page flipping for 3D acceleration. This will increase performance
-but not work correctly in some rare cases, hence the default is
-.B off.
-.br
-.B Note:
-Page flipping does not work well in certain configurations with MergedFB.  If you
-see rendering errors or other strange behavior, disable page flipping.
-
-
-.SH SEE ALSO
-XFree86(1), XF86Config(__filemansuffix__), xf86config(1), Xserver(1), X(__miscmansuffix__)
-.SH AUTHORS
-.nf 
-Authors include: ...