cleanup of powerpc miniroot/ramdisk installation, scrap floppy installation

since ramdisk installation works much better.

17 files changed, 1 insertions, 1245 deletions

diff --git a/distrib/powerpc/inst/Makefile b/distrib/powerpc/inst/Makefile
deleted file mode 100644
index 2e19d860c8a..00000000000
--- a/distrib/powerpc/inst/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#	$NetBSD: Makefile,v 1.1 1995/07/18 04:13:06 briggs Exp $
-
-TOP=		${.CURDIR}/..
-
-.include "${TOP}/Makefile.inc"
-IMAGE=		inst-${REV}.fs
-
-.include "${TOP}/inst-common/Makefile.inc"
diff --git a/distrib/powerpc/inst/disktab.preinstall b/distrib/powerpc/inst/disktab.preinstall
deleted file mode 100644
index 81a0bb0a052..00000000000
--- a/distrib/powerpc/inst/disktab.preinstall
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-#	$NetBSD: disktab.preinstall,v 1.1 1995/07/18 04:13:07 briggs Exp $
-#
-# Disk geometry and partition layout tables. 
-# Key:
-#	dt	controller type
-#	ty	type of disk (fixed, removeable, simulated)
-#	d[0-4]	drive-type-dependent parameters
-#	ns	#sectors/track
-#	nt	#tracks/cylinder
-#	nc	#cylinders/disk
-#	sc	#sectors/cylinder, nc*nt default
-#	su	#sectors/unit, sc*nc default
-#	se	sector size, DEV_BSIZE default
-#	rm	rpm, 3600 default
-#	sf	supports bad144-style bad sector forwarding
-#	sk	sector skew per track, default 0
-#	cs	sector skew per cylinder, default 0
-#	hs	headswitch time, default 0
-#	ts	one-cylinder seek time, default 0
-#	il	sector interleave (n:1), 1 default
-#	bs	boot block size, default BBSIZE
-#	sb	superblock size, default SBSIZE
-#	o[a-h]	partition offsets in sectors
-#	p[a-h]	partition sizes in sectors
-#	b[a-h]	partition block sizes in bytes
-#	f[a-h]	partition fragment sizes in bytes
-#	t[a-h]	partition types (filesystem, swap, etc)
-#
-# All partition sizes reserve space for bad sector tables.
-# (5 cylinders needed for maintenance + replacement sectors)
-#
diff --git a/distrib/powerpc/inst/dot.instutils b/distrib/powerpc/inst/dot.instutils
deleted file mode 100644
index 94a55659fe5..00000000000
--- a/distrib/powerpc/inst/dot.instutils
+++ /dev/null
@@ -1,156 +0,0 @@
-#
-#	$NetBSD: dot.instutils,v 1.1 1995/07/18 04:13:08 briggs Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-#    must display the following acknowledgement:
-#	This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-#    derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-# Installation configuration utilites (functions), to get NetBSD configured
-# reasonably once it is installed on the hard disk.  These are meant to be
-# invoked from the shell prompt, by people installing NetBSD.
-
-Configure()
-{
-	DEV=/mnt/dev
-	ETC=/mnt/etc
-
-	echo	"You will now be prompted for information about this"
-	echo	"machine.  If you hit return, the default answer (in"
-	echo	"brackets) will be used."
-
-	echo	""
-	echo -n	"What is this machine's hostname? [unknown.host.domain] "
-	read hname
-	if [ "$hname" = "" ]; then
-		hname=unknown.host.domain
-	fi
-	echo $hname > ${ETC}/myname
-	proto_domain=`echo $hname | sed -e 's/[^.]*\.//'`
-
-	echo	""
-	echo	"What domain is this machine in (this is NOT its YP"
-	echo -n	"domain name)? [$proto_domain] "
-	read dname
-	if [ "$dname" = "" ]; then
-		dname=$proto_domain
-	fi
-
-	echo	""
-	if [ -e ${ETC}/sendmail.cf ]; then
-		echo	"WARNING: A default sendmail.cf exists, and probably"
-		echo	"needs to be tuned and/or replaced, to work properly at"
-		echo	"your site!"
-	else
-		echo	"WARNING: No default sendmail.cf installed.  Did you"
-		echo	"forget to install the 'etc' distribution?"
-	fi
-
-	echo	"127.0.0.1	localhost localhost.$dname" > ${ETC}/hosts
-
-	echo	""
-	echo -n	"Does this machine have an ethernet interface? [y] "
-        read resp
-        case "$resp" in
-	n*)
-		;;
-	*)
-		intf=
-		while [ "$intf" = "" ]; do
-			echo -n "What is the primary interface name "
-			echo -n "(e.g. ae0, etc)? "
-			read intf
-		done
-		echo -n "What is the hostname for this interface? [$hname] "
-		read ifname
-		if [ "$ifname" = "" ]; then
-			ifname=$hname
-		fi
-		ifaddr=
-		while [ "$ifaddr" = "" ]; do
-			echo -n "What is the IP address associated with "
-			echo -n "interface ${intf}? "
-			read ifaddr
-		done
-		echo "$ifaddr	$ifname `echo $ifname | sed -e s/\.$dname//`" \
-		    >> ${ETC}/hosts
-
-		echo -n "Does this interface have a special netmask? [n] "
-		read resp
-		case "$resp" in
-			y*)
-				echo -n "What is the netmask? [0xffffff00] "
-				read ifnetmask
-				if [ "$ifnetmask" = "" ]; then
-					ifnetmask=0xffffff00
-				fi
-				;;
-			*)
-				ifnetmask=
-				;;
-		esac
-
-		echo -n "Does this interface need additional flags? [n] "
-		read resp
-		case "$resp" in
-			y*)
-				echo -n "What flags? [link0] "
-				read ifflags
-				if [ "$ifflags" = "" ]; then
-					ifflags=link0
-				fi
-				;;
-			*)
-				ifflags=
-				;;
-		esac
-		echo "inet $ifname $ifnetmask $ifflags" > ${ETC}/hostname.$intf
-
-		echo    ""
-		echo -n	"WARNING: if you have any more ethernet interfaces, "
-		echo	"you will have to configure"
-		echo -n "them by hand.  Read the comments in /etc/netstart to"
-		echo	"learn how to do this."
-		;;
-	esac
-	
-	echo	""
-	echo -n	"Making device nodes..."
-	cd ${DEV}
-	sh MAKEDEV all
-	echo	" done."
-
-	sync
-
-	echo	"You may now reboot your machine with the shutdown command."
-	echo	"	shutdown -r now"
-	echo	"to reboot or"
-	echo	"	shutdown -h now"
-	echo	"to halt."
-	echo	"Remember to erase the miniroot name from the booter's"
-	echo	"booting preferences dialog box before booting again."
-}
diff --git a/distrib/powerpc/inst/dot.profile b/distrib/powerpc/inst/dot.profile
deleted file mode 100644
index 603cd70ea87..00000000000
--- a/distrib/powerpc/inst/dot.profile
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-#	$NetBSD: dot.profile,v 1.1 1995/07/18 04:13:09 briggs Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-#    must display the following acknowledgement:
-#	This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-#    derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-PATH=/sbin:/bin:/usr/bin:/usr/sbin:/
-export PATH
-TERM=vt200
-export TERM
-
-# set up some sane defaults
-echo 'erase ^?, werase ^H, kill ^U, intr ^C'
-stty newcrt werase ^H intr ^C kill ^U erase ^? 9600
-echo ''
-
-# pull in the function definitions that people will use from the shell prompt.
-. /.commonutils
-. /.instutils
-
-# run the installation script.
-umask 022
-install
diff --git a/distrib/powerpc/inst/install.sh b/distrib/powerpc/inst/install.sh
deleted file mode 100644
index 1eec1d88717..00000000000
--- a/distrib/powerpc/inst/install.sh
+++ /dev/null
@@ -1,269 +0,0 @@
-#!/bin/sh
-#
-#	$NetBSD: install.sh,v 1.1 1995/07/18 04:13:10 briggs Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-#    must display the following acknowledgement:
-#	This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-#    derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-#	NetBSD installation script.
-#	In a perfect world, this would be a nice C program, with a reasonable
-#	user interface.
-
-FSTABDIR=/mnt/etc			# /mnt/etc
-#DONTDOIT=echo
-
-VERSION=1.0
-FSTAB=${FSTABDIR}/fstab
-
-getresp() {
-	read resp
-	if [ "X$resp" = "X" ]; then
-		resp=$1
-	fi
-}
-
-getvar() {
-	echo $(eval $(echo "echo \$$1"))
-}
-
-shiftvar() {
-	local - var
-	var="$1"
-	list="$(getvar $var)"
-	set -- $list
-	shift
-	setvar $var "$*"
-}
-
-getparts() {
-	disklabel $1 2>/dev/null | sed -e '/^[ ][ ][ad-p]/!d' |
-	sed -e 's,^[ ]*\([a-p]\):[ ]*[0-9]*[ ]*[0-9]*[ ][ ]*\([a-zA-Z0-9.]*\).*,\1 \2,' |
-	sed -e ':a
-		N;${s/\n/ /g;p;d;}
-		ba'
-}
-
-getdrives() {
-	local du thispart
-	for du in /dev/r${drivetype}?a; do
-		dd if=$du of=/dev/null bs=1b count=1 >/dev/null 2>&1
-		if [ $? -eq 0 ]; then
-			thisunit=`echo $du | sed -e 's,/dev/r\(...\)a,\1,g'`
-			driveunits="$driveunits $thisunit"
-		else
-			continue;
-		fi
-		setvar $thisunit "$(getparts $thisunit)"
-		export $thisunit
-	done
-	export drivenunits
-}
-
-prepdrive() {
-	echo	"which drive would you like to prepare next?"
-	echo	"choices are: ${driveunits}"
-	echo	""
-	getresp
-	case $resp in
-	*)	;;
-	esac
-}
-
-echo	"Welcome to the NetBSD ${VERSION} installation program."
-echo	""
-echo	"This program is designed to help you put NetBSD on your hard disk,"
-echo	"in a simple and rational way.  Its main objective is to format,"
-echo	"mount and create an fstab for your root (/) and user (/usr)"
-echo	"partitions."
-echo	""
-echo	"As with anything which modifies your hard drive's contents, this"
-echo	"program can cause SIGNIFICANT data loss, and you are advised"
-echo	"to make sure your hard drive is backed up before beginning the"
-echo	"installation process."
-echo	""
-echo	"Default answers are displyed in brackets after the questions."
-echo	"You can hit Control-C at any time to quit, but if you do so at a"
-echo	"prompt, you may have to hit return.  Also, quitting in the middle of"
-echo	"installation may leave your system in an inconsistent state."
-echo	""
-echo -n "Proceed with installation? [n] "
-getresp "n"
-case "$resp" in
-	y*|Y*)
-		echo	"scanning for the root device"
-		;;
-	*)
-		echo	""
-		echo	"OK, then.  Enter 'halt' at the prompt to halt the"
-		echo	"machine or 'reboot' to reboot it."
-		exit
-		;;
-esac
-
-drivetype=sd
-sect_fwd=""
-
-# find out what units are possible for that disk, and query the user.
-getdrives
-for du in $driveunits; do
-	set -- $(getvar $du)
-	if [ $# -ge 2 -a "$1" = "a" -a "`echo $2 | sed -e 's,.*BSD.*,BSD,'`" = "BSD" ]; then
-		rdev=$du
-	fi
-done
-
-echo	""
-echo	"The root device you have chosen is on: ${rdev}"
-echo	""
-# driveunits=`ls /dev/${drivetype}?a | sed -e 's,/dev/\(...\)a,\1,g'`
-if [ "X${driveunits}" = "X" ]; then
-	echo	"FATAL ERROR:"
-	echo	"No devices for disks of type '${drivetype}'."
-	echo	"This is probably a bug in the install disks."
-	echo	"Exiting install program."
-	exit
-fi
-
-echo	""
-echo	"THIS IS YOUR LAST CHANCE!!!"
-echo	""
-echo	"(answering yes will format your root partition on $rdev)"
-echo -n	"Are you SURE you want NetBSD installed on your hard drive? (yes/no) "
-answer=""
-while [ "$answer" = "" ]; do
-	getresp
-	case $resp in
-		yes|YES)
-			echo	""
-			answer=yes
-			;;
-		no|NO)
-			echo	""
-			echo -n	"OK, then.  enter 'halt' to halt the machine.  "
-			exit
-			;;
-		*)
-			echo -n "Please answer 'yes' or 'no'."
-			;;
-	esac
-done
-echo	"Initializing / (root) filesystem, and mounting..."
-$DONTDOIT newfs /dev/r${rdev}a $name
-$DONTDOIT mount -v /dev/${rdev}a /mnt
-echo	""
-echo -n	"Creating a fstab..."
-mkdir -p $FSTABDIR
-echo "/dev/${rdev}a	/	ufs	rw	1	1" > $FSTAB
-
-# get rid of this partition
-shiftvar $rdev
-shiftvar $rdev
-
-echo	""
-echo	"Now lets setup your /usr file system"
-echo	"(Once a valid input for drive and partition is seen"
-echo	"it will be FORMATTED and inserted in the fstab.)"
-while [ "X$usrpart" = "X" ]; do
-	resp=""
-	drivename=""
-	while [ "X$resp" = "X" ]; do
-		echo	"choices: $driveunits"
-		echo	"which drive do you want /usr on?"
-		getresp
-		set -- $driveunits
-		while [ $# -gt 0 ]; do
-			if [ "X$resp" = "X$1" ]; then
-				drivename=$1
-				break;
-			else
-				shift
-			fi
-		done
-		if [ "X$drivename" != "X" ]; then
-			break
-		fi
-	done
-
-	usrpart=""
-	echo	"You have selected $drivename"
-	echo	"here is a list of partitions on $drivename"
-	disklabel $drivename 2>/dev/null | sed -e '/^[ ][ ][ad-p]:/p;/^#[ \t]*size/p;d' 
-	echo	"which partition would you like to format and have"
-	echo -n	"mounted as /usr? (supply the letter): "
-	getresp
-	if [ "X$resp" = "X" ]; then
-		continue;
-	fi
-
-	list=$(getvar $drivename)
-	set -- $list
-	while [ $# -gt 0 ]; do
-		if [ "$resp" = "$1" ]; then
-			if [ "`echo $2 | sed -e 's,.*BSD.*,BSD,'`" != "BSD" ]; then
-				echo	""
-				echo -n	"$drivename$resp is of type $2 which is not"
-				echo	" a BSD filesystem type"
-				break
-			fi
-			usrpart=$drivename$resp
-			break
-		else
-			shift
-			shift
-		fi
-	done
-	if [ "X$usrpart" = "X" ]; then
-		echo	"$resp is not a valid input."
-		echo	""
-	fi
-done
-
-echo	""
-echo	"Initializing /usr filesystem, and mounting..."
-$DONTDOIT newfs /dev/r${usrpart} $name
-$DONTDOIT mkdir -p /mnt/usr
-$DONTDOIT mount -v /dev/${usrpart} /mnt/usr
-echo	""
-echo -n	"Adding to fstab..."
-echo "/dev/${usrpart}	/usr	ufs	rw	1	2" >> $FSTAB
-sync
-echo	" done."
-
-echo	""
-echo	""
-echo	"OK!  The preliminary work of setting up your disk is now complete,"
-echo	"and you can install the actual NetBSD software."
-echo	""
-echo	"Right now, your root is mounted on /mnt and your usr on /mnt/usr."
-echo	"You should consult the installation notes to determine how to load"
-echo	"and install the NetBSD distribution sets, and how to configure your"
-echo	"system when you are done."
-echo	""
-echo	"GOOD LUCK!"
-echo	""
diff --git a/distrib/powerpc/inst/list b/distrib/powerpc/inst/list
deleted file mode 100644
index c5cf8207ae7..00000000000
--- a/distrib/powerpc/inst/list
+++ /dev/null
@@ -1,10 +0,0 @@
-#	$NetBSD: list,v 1.1 1995/07/18 04:13:12 briggs Exp $
-
-# the disktab explanation file
-COPY	disktab.preinstall		etc
-
-# and the installation tools
-COPY	dot.profile			.profile
-COPY	dot.instutils			.instutils
-COPY	install.sh			install
-SPECIAL	chmod 755 install
diff --git a/distrib/powerpc/kc-common/Makefile.inc b/distrib/powerpc/kc-common/Makefile.inc
deleted file mode 100644
index b2acf64471a..00000000000
--- a/distrib/powerpc/kc-common/Makefile.inc
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-#	$NetBSD: Makefile.inc,v 1.1 1995/07/18 04:13:14 briggs Exp $
-#
-
-# TOP is assumed to be defined by Makefile including this one.
-
-CBIN=		raminst
-COMMONDIR=	${TOP}/kc-common
-
-MOUNT_POINT?=	${TOP}/kc/fs
-
-LISTS=		${COMMONDIR}/list ${.CURDIR}/list
-CRUNCHCONF=	${COMMONDIR}/${CBIN}.conf
-MTREE=		${COMMONDIR}/mtree.conf
-
-all: ${CBIN}
-	mkdir -p ${MOUNT_POINT}
-	mtree -def ${MTREE} -p ${MOUNT_POINT}/ -u
-	TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \
-	    TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${LISTS}
-	mkcdfs ${IMAGE} ${MOUNT_POINT}
-
-unconfig:
-	-/bin/rm -f ${IMAGE}
-	-/bin/rm -rf ${MOUNT_POINT}
-
-${CBIN}.mk ${CBIN}.cache ${CBIN}.c: ${CRUNCHCONF}
-	crunchgen -E -D ${BSDSRCDIR} -L ${DESTDIR}/usr/lib ${CRUNCHCONF}
-
-${CBIN}: ${CBIN}.mk ${CBIN}.cache ${CBIN}.c
-	make -f ${CBIN}.mk all
-
-clean cleandir:
-	/bin/rm -f core ${IMAGE} ${CBIN} ${CBIN}.mk ${CBIN}.cache *.o *.lo *.c
-	/bin/rm -rf ${MOUNT_POINT}
-
-.include <bsd.obj.mk>
-.include <bsd.subdir.mk>
diff --git a/distrib/powerpc/kc-common/list b/distrib/powerpc/kc-common/list
deleted file mode 100644
index 233e4f3e230..00000000000
--- a/distrib/powerpc/kc-common/list
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-#	$NetBSD: list,v 1.2 1995/08/13 13:21:07 briggs Exp $
-#
-
-# copy the crunched binary, link to it, and kill it
-COPY	${OBJDIR}/raminst		raminst
-LINK	raminst			bin/cat
-LINK	raminst			bin/cp
-LINK	raminst			bin/pwd
-LINK	raminst			bin/sh
-LINK	bin/sh			bin/-sh
-LINK	raminst			bin/stty
-LINK	raminst			bin/sync
-LINK	raminst			bin/test
-LINK	raminst			bin/[
-LINK	raminst			sbin/init
-LINK	raminst			sbin/mount
-LINK	raminst			sbin/mount_ffs
-LINK	raminst			sbin/reboot
-LINK	raminst			sbin/umount
-SPECIAL	/bin/rm raminst
-
-# copy the MAKEDEV script and make some devices
-COPY	${DESTDIR}/dev/MAKEDEV	dev/MAKEDEV
-SPECIAL	cd dev; sh MAKEDEV raminst
-SPECIAL	/bin/rm dev/MAKEDEV
-
-# various files that we need in /etc for the install
-
-# and the common installation tools
diff --git a/distrib/powerpc/kc-common/mtree.conf b/distrib/powerpc/kc-common/mtree.conf
deleted file mode 100644
index b348b9773a3..00000000000
--- a/distrib/powerpc/kc-common/mtree.conf
+++ /dev/null
@@ -1,74 +0,0 @@
-#
-#	$NetBSD: mtree.conf,v 1.1 1995/07/18 04:13:24 briggs Exp $
-#
-
-/set type=dir uname=root gname=wheel mode=0755
-# .
-.
-
-# ./bin
-bin
-# ./bin
-..
-
-# ./dev
-dev
-# ./dev
-..
-
-# ./etc
-etc
-# ./etc
-..
-
-# ./mnt
-mnt
-# ./mnt
-..
-
-# ./mnt2
-mnt2
-# ./mnt2
-..
-
-# ./sbin
-sbin
-# ./sbin
-..
-
-# ./tmp
-tmp
-# ./tmp
-..
-
-# ./usr
-usr
-
-# ./usr/bin
-bin
-# ./usr/bin
-..
-
-# ./usr/mdec
-mdec
-# ./usr/mdec
-..
-
-# ./usr/sbin
-sbin
-# ./usr/sbin
-..
-
-# ./usr/share
-share
-
-# ./usr/share/misc
-misc
-# ./usr/share/misc
-..
-
-# ./usr/share
-..
-
-# ./usr
-..
diff --git a/distrib/powerpc/kc-common/raminst.conf b/distrib/powerpc/kc-common/raminst.conf
deleted file mode 100644
index 4409e485e31..00000000000
--- a/distrib/powerpc/kc-common/raminst.conf
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-#	$NetBSD: raminst.conf,v 1.3 1995/09/30 20:00:47 briggs Exp $
-#
-# ram.conf - unified binary for the RAM disk
-#
-
-srcdirs bin sbin usr.bin usr.sbin
-srcdirs gnu/usr.bin
-
-progs cat cp pwd 
-progs sh stty sync test init
-progs mount mount_ffs reboot 
-progs umount
-
-ln sh -sh		# init invokes the shell this way
-ln test [
-ln mount_ffs ffs
-
-libs -ledit -lutil -ltermcap -lcompat -ll -lm -lz
diff --git a/distrib/powerpc/kc-common/termcap.vt b/distrib/powerpc/kc-common/termcap.vt
deleted file mode 100644
index d0c58f1022b..00000000000
--- a/distrib/powerpc/kc-common/termcap.vt
+++ /dev/null
@@ -1,67 +0,0 @@
-#
-#	$NetBSD: termcap.vt,v 1.1 1995/07/18 04:13:31 briggs Exp $
-#
-# Copyright (c) 1980, 1985, 1989 The Regents of the University of California.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-#    must display the following acknowledgement:
-#	This product includes software developed by the University of
-#	California, Berkeley and its contributors.
-# 4. Neither the name of the University nor the names of its contributors
-#    may be used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-#	@(#)termcap.src	5.109 (Berkeley) 3/8/93
-#
-vt200|vt220|dec-vt220|vt200-js|vt220-js|dec vt200 series with jump scroll:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\
-	:RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:ct=\E[3g:dc=\E[P:dl=\E[M:\
-	:ei=\E[4l:im=\E[4h:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:\
-	:k5=\E[21~:k6=\E[23~:k7=\E[24~:k8=\E[25~:kD=\E[3~:kH=\E[4~:\
-	:kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kh=\E[1~:km:mi:ms:\
-	:if=/usr/share/tabset/vt100:se=\E[27m:st=\EH:ue=\E[24m:\
-	:tc=vt100:
-vt100|dec-vt100|vt100-am|vt100am|dec vt100:\
-	:bl=^G:cr=^M:it#8:\
-	:do=^J:co#80:li#24:cl=50\E[;H\E[2J:sf=2*\ED:\
-	:le=^H:bs:am:cm=5\E[%i%d;%dH:nd=2\E[C:up=2\E[A:cb=3\E[1K:\
-	:ce=3\E[K:cd=50\E[J:so=2\E[7m:se=2\E[m:us=2\E[4m:ue=2\E[m:\
-	:md=2\E[1m:mr=2\E[7m:mb=2\E[5m:me=2\E[m:is=\E[1;24r\E[24;1H:\
-	:if=/usr/share/tabset/vt100:\
-	:rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:ks=\E[?1h\E=:ke=\E[?1l\E>:\
-	:ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:kb=^H:\
-	:ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:pt:sr=2*\EM:vt#3:xn:\
-	:sc=\E7:rc=\E8:cs=\E[%i%d;%dr:
-vt300|vt320|vt300-80|VT 300 with 80 columns, on VMS:\
-	:AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
-	:LE=\E[%dD:RI=\E[%dC:SR=1*\E[%dM:UP=\E[%dA:al=\E[L:\
-	:am:bl=^G:bs:cd=2*\E[J:ce=2*\E[K:cl=45\E[H\E[2J:\
-	:cm=%i\E[%d;%dH:co#80:cr=\r:cs=\E[%i%d;%dr:ct=\E[3g:\
-	:dc=\E[P:dl=\E[M:dm=:do=\ED:ec=\E[%dX:ed=:ei=\E[4l:\
-	:ho=\E[H:ic:im=\E[4h:it#8:k1=\EOP:k2=\EOQ:k3=\EOR:\
-	:k4=\EOS:kd=\E[B:ke=\E[?1l\E>:kl=\E[D:kn#4:kr=\E[C:ks=\E[?1h\E=:\
-	:ku=\E[A:le=^H:li#24:mb=\E[5m:md=\E[1m:me=\E[0m:mi:\
-	:mr=\E[7m:ms:nd=\E[C:nl=\ED:nw=\EE:pf=\E[?4i:po=\E[?5i:\
-	:ps=\E[i:rc=\E8:sc=\E7:se=\E[27m:sf=1*\ED:so=\E[7m:\
-	:sr=1*\EM:st=\EH:ue=\E[24m:up=\EM:us=\E[4m:xn:
diff --git a/distrib/powerpc/kc/Makefile b/distrib/powerpc/kc/Makefile
deleted file mode 100644
index e858bd10388..00000000000
--- a/distrib/powerpc/kc/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#	$NetBSD: Makefile,v 1.1 1995/07/18 04:13:06 briggs Exp $
-
-TOP=		${.CURDIR}/..
-
-.include "${TOP}/Makefile.inc"
-IMAGE=		kc-${REV}.fs
-
-.include "${TOP}/kc-common/Makefile.inc"
diff --git a/distrib/powerpc/kc/dot.instutils b/distrib/powerpc/kc/dot.instutils
deleted file mode 100644
index 94a55659fe5..00000000000
--- a/distrib/powerpc/kc/dot.instutils
+++ /dev/null
@@ -1,156 +0,0 @@
-#
-#	$NetBSD: dot.instutils,v 1.1 1995/07/18 04:13:08 briggs Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-#    must display the following acknowledgement:
-#	This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-#    derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-# Installation configuration utilites (functions), to get NetBSD configured
-# reasonably once it is installed on the hard disk.  These are meant to be
-# invoked from the shell prompt, by people installing NetBSD.
-
-Configure()
-{
-	DEV=/mnt/dev
-	ETC=/mnt/etc
-
-	echo	"You will now be prompted for information about this"
-	echo	"machine.  If you hit return, the default answer (in"
-	echo	"brackets) will be used."
-
-	echo	""
-	echo -n	"What is this machine's hostname? [unknown.host.domain] "
-	read hname
-	if [ "$hname" = "" ]; then
-		hname=unknown.host.domain
-	fi
-	echo $hname > ${ETC}/myname
-	proto_domain=`echo $hname | sed -e 's/[^.]*\.//'`
-
-	echo	""
-	echo	"What domain is this machine in (this is NOT its YP"
-	echo -n	"domain name)? [$proto_domain] "
-	read dname
-	if [ "$dname" = "" ]; then
-		dname=$proto_domain
-	fi
-
-	echo	""
-	if [ -e ${ETC}/sendmail.cf ]; then
-		echo	"WARNING: A default sendmail.cf exists, and probably"
-		echo	"needs to be tuned and/or replaced, to work properly at"
-		echo	"your site!"
-	else
-		echo	"WARNING: No default sendmail.cf installed.  Did you"
-		echo	"forget to install the 'etc' distribution?"
-	fi
-
-	echo	"127.0.0.1	localhost localhost.$dname" > ${ETC}/hosts
-
-	echo	""
-	echo -n	"Does this machine have an ethernet interface? [y] "
-        read resp
-        case "$resp" in
-	n*)
-		;;
-	*)
-		intf=
-		while [ "$intf" = "" ]; do
-			echo -n "What is the primary interface name "
-			echo -n "(e.g. ae0, etc)? "
-			read intf
-		done
-		echo -n "What is the hostname for this interface? [$hname] "
-		read ifname
-		if [ "$ifname" = "" ]; then
-			ifname=$hname
-		fi
-		ifaddr=
-		while [ "$ifaddr" = "" ]; do
-			echo -n "What is the IP address associated with "
-			echo -n "interface ${intf}? "
-			read ifaddr
-		done
-		echo "$ifaddr	$ifname `echo $ifname | sed -e s/\.$dname//`" \
-		    >> ${ETC}/hosts
-
-		echo -n "Does this interface have a special netmask? [n] "
-		read resp
-		case "$resp" in
-			y*)
-				echo -n "What is the netmask? [0xffffff00] "
-				read ifnetmask
-				if [ "$ifnetmask" = "" ]; then
-					ifnetmask=0xffffff00
-				fi
-				;;
-			*)
-				ifnetmask=
-				;;
-		esac
-
-		echo -n "Does this interface need additional flags? [n] "
-		read resp
-		case "$resp" in
-			y*)
-				echo -n "What flags? [link0] "
-				read ifflags
-				if [ "$ifflags" = "" ]; then
-					ifflags=link0
-				fi
-				;;
-			*)
-				ifflags=
-				;;
-		esac
-		echo "inet $ifname $ifnetmask $ifflags" > ${ETC}/hostname.$intf
-
-		echo    ""
-		echo -n	"WARNING: if you have any more ethernet interfaces, "
-		echo	"you will have to configure"
-		echo -n "them by hand.  Read the comments in /etc/netstart to"
-		echo	"learn how to do this."
-		;;
-	esac
-	
-	echo	""
-	echo -n	"Making device nodes..."
-	cd ${DEV}
-	sh MAKEDEV all
-	echo	" done."
-
-	sync
-
-	echo	"You may now reboot your machine with the shutdown command."
-	echo	"	shutdown -r now"
-	echo	"to reboot or"
-	echo	"	shutdown -h now"
-	echo	"to halt."
-	echo	"Remember to erase the miniroot name from the booter's"
-	echo	"booting preferences dialog box before booting again."
-}
diff --git a/distrib/powerpc/kc/dot.profile b/distrib/powerpc/kc/dot.profile
deleted file mode 100644
index 603cd70ea87..00000000000
--- a/distrib/powerpc/kc/dot.profile
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-#	$NetBSD: dot.profile,v 1.1 1995/07/18 04:13:09 briggs Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-# 
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-#    must display the following acknowledgement:
-#	This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-#    derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-PATH=/sbin:/bin:/usr/bin:/usr/sbin:/
-export PATH
-TERM=vt200
-export TERM
-
-# set up some sane defaults
-echo 'erase ^?, werase ^H, kill ^U, intr ^C'
-stty newcrt werase ^H intr ^C kill ^U erase ^? 9600
-echo ''
-
-# pull in the function definitions that people will use from the shell prompt.
-. /.commonutils
-. /.instutils
-
-# run the installation script.
-umask 022
-install
diff --git a/distrib/powerpc/kc/install.sh b/distrib/powerpc/kc/install.sh
deleted file mode 100644
index 1eec1d88717..00000000000
--- a/distrib/powerpc/kc/install.sh
+++ /dev/null
@@ -1,269 +0,0 @@
-#!/bin/sh
-#
-#	$NetBSD: install.sh,v 1.1 1995/07/18 04:13:10 briggs Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-#    must display the following acknowledgement:
-#	This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-#    derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-#	NetBSD installation script.
-#	In a perfect world, this would be a nice C program, with a reasonable
-#	user interface.
-
-FSTABDIR=/mnt/etc			# /mnt/etc
-#DONTDOIT=echo
-
-VERSION=1.0
-FSTAB=${FSTABDIR}/fstab
-
-getresp() {
-	read resp
-	if [ "X$resp" = "X" ]; then
-		resp=$1
-	fi
-}
-
-getvar() {
-	echo $(eval $(echo "echo \$$1"))
-}
-
-shiftvar() {
-	local - var
-	var="$1"
-	list="$(getvar $var)"
-	set -- $list
-	shift
-	setvar $var "$*"
-}
-
-getparts() {
-	disklabel $1 2>/dev/null | sed -e '/^[ ][ ][ad-p]/!d' |
-	sed -e 's,^[ ]*\([a-p]\):[ ]*[0-9]*[ ]*[0-9]*[ ][ ]*\([a-zA-Z0-9.]*\).*,\1 \2,' |
-	sed -e ':a
-		N;${s/\n/ /g;p;d;}
-		ba'
-}
-
-getdrives() {
-	local du thispart
-	for du in /dev/r${drivetype}?a; do
-		dd if=$du of=/dev/null bs=1b count=1 >/dev/null 2>&1
-		if [ $? -eq 0 ]; then
-			thisunit=`echo $du | sed -e 's,/dev/r\(...\)a,\1,g'`
-			driveunits="$driveunits $thisunit"
-		else
-			continue;
-		fi
-		setvar $thisunit "$(getparts $thisunit)"
-		export $thisunit
-	done
-	export drivenunits
-}
-
-prepdrive() {
-	echo	"which drive would you like to prepare next?"
-	echo	"choices are: ${driveunits}"
-	echo	""
-	getresp
-	case $resp in
-	*)	;;
-	esac
-}
-
-echo	"Welcome to the NetBSD ${VERSION} installation program."
-echo	""
-echo	"This program is designed to help you put NetBSD on your hard disk,"
-echo	"in a simple and rational way.  Its main objective is to format,"
-echo	"mount and create an fstab for your root (/) and user (/usr)"
-echo	"partitions."
-echo	""
-echo	"As with anything which modifies your hard drive's contents, this"
-echo	"program can cause SIGNIFICANT data loss, and you are advised"
-echo	"to make sure your hard drive is backed up before beginning the"
-echo	"installation process."
-echo	""
-echo	"Default answers are displyed in brackets after the questions."
-echo	"You can hit Control-C at any time to quit, but if you do so at a"
-echo	"prompt, you may have to hit return.  Also, quitting in the middle of"
-echo	"installation may leave your system in an inconsistent state."
-echo	""
-echo -n "Proceed with installation? [n] "
-getresp "n"
-case "$resp" in
-	y*|Y*)
-		echo	"scanning for the root device"
-		;;
-	*)
-		echo	""
-		echo	"OK, then.  Enter 'halt' at the prompt to halt the"
-		echo	"machine or 'reboot' to reboot it."
-		exit
-		;;
-esac
-
-drivetype=sd
-sect_fwd=""
-
-# find out what units are possible for that disk, and query the user.
-getdrives
-for du in $driveunits; do
-	set -- $(getvar $du)
-	if [ $# -ge 2 -a "$1" = "a" -a "`echo $2 | sed -e 's,.*BSD.*,BSD,'`" = "BSD" ]; then
-		rdev=$du
-	fi
-done
-
-echo	""
-echo	"The root device you have chosen is on: ${rdev}"
-echo	""
-# driveunits=`ls /dev/${drivetype}?a | sed -e 's,/dev/\(...\)a,\1,g'`
-if [ "X${driveunits}" = "X" ]; then
-	echo	"FATAL ERROR:"
-	echo	"No devices for disks of type '${drivetype}'."
-	echo	"This is probably a bug in the install disks."
-	echo	"Exiting install program."
-	exit
-fi
-
-echo	""
-echo	"THIS IS YOUR LAST CHANCE!!!"
-echo	""
-echo	"(answering yes will format your root partition on $rdev)"
-echo -n	"Are you SURE you want NetBSD installed on your hard drive? (yes/no) "
-answer=""
-while [ "$answer" = "" ]; do
-	getresp
-	case $resp in
-		yes|YES)
-			echo	""
-			answer=yes
-			;;
-		no|NO)
-			echo	""
-			echo -n	"OK, then.  enter 'halt' to halt the machine.  "
-			exit
-			;;
-		*)
-			echo -n "Please answer 'yes' or 'no'."
-			;;
-	esac
-done
-echo	"Initializing / (root) filesystem, and mounting..."
-$DONTDOIT newfs /dev/r${rdev}a $name
-$DONTDOIT mount -v /dev/${rdev}a /mnt
-echo	""
-echo -n	"Creating a fstab..."
-mkdir -p $FSTABDIR
-echo "/dev/${rdev}a	/	ufs	rw	1	1" > $FSTAB
-
-# get rid of this partition
-shiftvar $rdev
-shiftvar $rdev
-
-echo	""
-echo	"Now lets setup your /usr file system"
-echo	"(Once a valid input for drive and partition is seen"
-echo	"it will be FORMATTED and inserted in the fstab.)"
-while [ "X$usrpart" = "X" ]; do
-	resp=""
-	drivename=""
-	while [ "X$resp" = "X" ]; do
-		echo	"choices: $driveunits"
-		echo	"which drive do you want /usr on?"
-		getresp
-		set -- $driveunits
-		while [ $# -gt 0 ]; do
-			if [ "X$resp" = "X$1" ]; then
-				drivename=$1
-				break;
-			else
-				shift
-			fi
-		done
-		if [ "X$drivename" != "X" ]; then
-			break
-		fi
-	done
-
-	usrpart=""
-	echo	"You have selected $drivename"
-	echo	"here is a list of partitions on $drivename"
-	disklabel $drivename 2>/dev/null | sed -e '/^[ ][ ][ad-p]:/p;/^#[ \t]*size/p;d' 
-	echo	"which partition would you like to format and have"
-	echo -n	"mounted as /usr? (supply the letter): "
-	getresp
-	if [ "X$resp" = "X" ]; then
-		continue;
-	fi
-
-	list=$(getvar $drivename)
-	set -- $list
-	while [ $# -gt 0 ]; do
-		if [ "$resp" = "$1" ]; then
-			if [ "`echo $2 | sed -e 's,.*BSD.*,BSD,'`" != "BSD" ]; then
-				echo	""
-				echo -n	"$drivename$resp is of type $2 which is not"
-				echo	" a BSD filesystem type"
-				break
-			fi
-			usrpart=$drivename$resp
-			break
-		else
-			shift
-			shift
-		fi
-	done
-	if [ "X$usrpart" = "X" ]; then
-		echo	"$resp is not a valid input."
-		echo	""
-	fi
-done
-
-echo	""
-echo	"Initializing /usr filesystem, and mounting..."
-$DONTDOIT newfs /dev/r${usrpart} $name
-$DONTDOIT mkdir -p /mnt/usr
-$DONTDOIT mount -v /dev/${usrpart} /mnt/usr
-echo	""
-echo -n	"Adding to fstab..."
-echo "/dev/${usrpart}	/usr	ufs	rw	1	2" >> $FSTAB
-sync
-echo	" done."
-
-echo	""
-echo	""
-echo	"OK!  The preliminary work of setting up your disk is now complete,"
-echo	"and you can install the actual NetBSD software."
-echo	""
-echo	"Right now, your root is mounted on /mnt and your usr on /mnt/usr."
-echo	"You should consult the installation notes to determine how to load"
-echo	"and install the NetBSD distribution sets, and how to configure your"
-echo	"system when you are done."
-echo	""
-echo	"GOOD LUCK!"
-echo	""
diff --git a/distrib/powerpc/kc/list b/distrib/powerpc/kc/list
deleted file mode 100644
index c5cf8207ae7..00000000000
--- a/distrib/powerpc/kc/list
+++ /dev/null
@@ -1,10 +0,0 @@
-#	$NetBSD: list,v 1.1 1995/07/18 04:13:12 briggs Exp $
-
-# the disktab explanation file
-COPY	disktab.preinstall		etc
-
-# and the installation tools
-COPY	dot.profile			.profile
-COPY	dot.instutils			.instutils
-COPY	install.sh			install
-SPECIAL	chmod 755 install
diff --git a/distrib/powerpc/miniroot/Makefile b/distrib/powerpc/miniroot/Makefile
index a9c1a88b186..7405f07edf6 100644
--- a/distrib/powerpc/miniroot/Makefile
+++ b/distrib/powerpc/miniroot/Makefile
@@ -34,7 +34,7 @@ elfrdsetroot:	${TOP}//elfrdsetroot.c
 	${HOSTCC} -o elfrdsetroot ${TOP}/elfrdsetroot.c
 
 setroot: ${IMAGE} bsd elfrdsetroot
-	elfrdsetroot bsd < ${IMAGE}
+	${.OBJDIR}/elfrdsetroot bsd < ${IMAGE}
 
 bsd:	${KERNEL}
 	cp ${KERNEL} bsd