Add drivers for the RDC R6040 Ethernet chipset

and RDC R6040 Ethernet PHY.

Written by Pyun YongHyeon for FreeBSD then
ported to OpenBSD by me.

Thanks once again to DMP for supplying hardware
which made this possible.

ok deraadt@

11 files changed, 2431 insertions, 10 deletions

diff --git a/share/man/man4/Makefile b/share/man/man4/Makefile
index 52e28c32226..c1eb81a1abf 100644
--- a/share/man/man4/Makefile
+++ b/share/man/man4/Makefile
@@ -1,4 +1,4 @@
-#	$OpenBSD: Makefile,v 1.518 2010/12/11 20:48:21 damien Exp $
+#	$OpenBSD: Makefile,v 1.519 2011/01/15 04:35:34 kevlo Exp $
 
 MAN=	aac.4 ac97.4 acphy.4 \
 	acpi.4 acpiac.4 acpiasus.4 acpibat.4 acpibtn.4 acpicpu.4 acpidock.4 \
@@ -43,7 +43,7 @@ MAN=	aac.4 ac97.4 acphy.4 \
 	pcfiic.4 pciide.4 pckbc.4 pckbd.4 pcmcia.4 pcn.4 pcppi.4 pcscp.4 \
 	pf.4 pflog.4 pflow.4 pfsync.4 pgt.4 piixpm.4 pim.4 \
 	pms.4 ppb.4 ppp.4 pppoe.4 pty.4 puc.4 pwdog.4 qsphy.4 radio.4 raid.4 \
-	ral.4 random.4 ray.4 rd.4 re.4 rgephy.4 ricohrtc.4 \
+	ral.4 random.4 ray.4 rd.4 re.4 rdcphy.4 rgephy.4 ricohrtc.4 \
 	rl.4 rlphy.4 route.4 rsu.4 rt.4 rum.4 run.4 \
 	rtfps.4 rtii.4 rtw.4 safe.4 safte.4 san.4 sbt.4 sbus.4 schsio.4 \
 	scsi.4 sd.4 \
@@ -63,7 +63,7 @@ MAN=	aac.4 ac97.4 acphy.4 \
 	uticom.4 utrh.4 uts.4 uvideo.4 uvisor.4 uvscom.4 uyap.4 utwitch.4 \
 	vether.4 vga.4 vgafb.4 vge.4 \
 	viaenv.4 viapm.4 viasio.4 vic.4 video.4 vlan.4 vmt.4 vnd.4 vr.4 \
-	vscsi.4 \
+	vscsi.4 vte.4 \
 	watchdog.4 wb.4 wbenv.4 wbng.4 wbsd.4 wbsio.4 wd.4 wdc.4 we.4 \
 	wi.4tbl wpi.4 wscons.4 wsdisplay.4 wskbd.4 wsmouse.4 wsmux.4 \
 	xe.4 xf86.4 xge.4 xl.4 xmphy.4 yds.4 ym.4 zero.4 zyd.4
diff --git a/share/man/man4/mii.4 b/share/man/man4/mii.4
index f80e80f987f..45d27fa8bc0 100644
--- a/share/man/man4/mii.4
+++ b/share/man/man4/mii.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: mii.4,v 1.28 2008/09/26 21:39:34 brad Exp $
+.\"	$OpenBSD: mii.4,v 1.29 2011/01/15 04:35:34 kevlo Exp $
 .\"	$NetBSD: mii.4,v 1.1 1998/11/04 05:21:50 thorpej Exp $
 .\"
 .\" Copyright (c) 1998 The NetBSD Foundation, Inc.
@@ -29,7 +29,7 @@
 .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 .\" POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: September 26 2008 $
+.Dd $Mdocdate: January 15 2011 $
 .Dt MII 4
 .Os
 .Sh NAME
@@ -59,6 +59,7 @@
 .Cd "nsphy* at mii?"
 .Cd "nsphyter* at mii?"
 .Cd "qsphy* at mii?"
+.Cd "rdcphy* at mii?"
 .Cd "rgephy* at mii?"
 .Cd "rlphy* at mii?"
 .Cd "sqphy* at mii?"
@@ -126,6 +127,7 @@ program.
 .Xr nsphy 4 ,
 .Xr nsphyter 4 ,
 .Xr qsphy 4 ,
+.Xr rdcphy 4 ,
 .Xr rgephy 4 ,
 .Xr rlphy 4 ,
 .Xr sqphy 4 ,
diff --git a/share/man/man4/pci.4 b/share/man/man4/pci.4
index 2f57f50c275..b12262c98f5 100644
--- a/share/man/man4/pci.4
+++ b/share/man/man4/pci.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: pci.4,v 1.300 2010/09/04 13:34:59 jmc Exp $
+.\"	$OpenBSD: pci.4,v 1.301 2011/01/15 04:35:34 kevlo Exp $
 .\"	$NetBSD: pci.4,v 1.29 2000/04/01 00:32:23 tsarna Exp $
 .\"
 .\" Copyright (c) 2000 Theo de Raadt.  All rights reserved.
@@ -31,7 +31,7 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: September 4 2010 $
+.Dd $Mdocdate: January 15 2011 $
 .Dt PCI 4
 .Os
 .Sh NAME
@@ -264,6 +264,8 @@ VMware VMXnet Virtual Interface Controller device
 VIA VT6122 PCI 10/100/Gigabit Ethernet device
 .It Xr vr 4
 VIA VT3043/VT86C100A/VT6105/VT6105M 10/100 Ethernet device
+.It Xr vte 4
+RDC R6040 10/100 Ethernet device
 .It Xr wb 4
 Winbond W89C840F 10/100 Ethernet device
 .It Xr xge 4
diff --git a/share/man/man4/rdcphy.4 b/share/man/man4/rdcphy.4
new file mode 100644
index 00000000000..02d809f2cd8
--- /dev/null
+++ b/share/man/man4/rdcphy.4
@@ -0,0 +1,33 @@
+.\"	$OpenBSD: rdcphy.4,v 1.1 2011/01/15 04:35:34 kevlo Exp $
+.\"
+.\" Copyright (c) 2011 Kevin Lo <kevlo@openbsd.org>
+.\"
+.\" Permission to use, copy, modify, and distribute this software for any
+.\" purpose with or without fee is hereby granted, provided that the above
+.\" copyright notice and this permission notice appear in all copies.
+.\"
+.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+.\"
+.Dd $Mdocdate: January 15 2011 $
+.Dt RDCPHY 4
+.Os
+.Sh NAME
+.Nm rdcphy
+.Nd RDC Semiconductor R6040 10/100 Ethernet PHY
+.Sh SYNOPSIS
+.Cd "rdcphy* at mii?"
+.Sh DESCRIPTION
+The
+.Nm
+driver supports the RDC Semiconductor R6040 10/100 Ethernet PHY.
+.Sh SEE ALSO
+.Xr ifmedia 4 ,
+.Xr intro 4 ,
+.Xr mii 4 ,
+.Xr ifconfig 8
diff --git a/share/man/man4/vte.4 b/share/man/man4/vte.4
new file mode 100644
index 00000000000..820759ce897
--- /dev/null
+++ b/share/man/man4/vte.4
@@ -0,0 +1,83 @@
+.\"	$OpenBSD: vte.4,v 1.1 2011/01/15 04:35:34 kevlo Exp $
+.\"
+.\" Copyright (c) 2011 Kevin Lo <kevlo@openbsd.org>
+.\"
+.\" Permission to use, copy, modify, and distribute this software for any
+.\" purpose with or without fee is hereby granted, provided that the above
+.\" copyright notice and this permission notice appear in all copies.
+.\"
+.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+.\"
+.Dd $Mdocdate: January 15 2011 $
+.Dt VTE 4
+.Os
+.Sh NAME
+.Nm vte
+.Nd RDC R6040 10/100 Ethernet device
+.Sh SYNOPSIS
+.Cd "vte* at pci?"
+.Cd "rdcphy* at mii?"
+.Sh DESCRIPTION
+The
+.Nm
+driver provides support for Ethernet interfaces based on the
+RDC R6040 Ethernet chipset which is commonly found on 
+Vortex86 System On a Chip (SoC).
+.Pp
+The
+.Nm
+driver supports interrupt moderation mechanism, a 64-bit multicast
+hash filter. 
+.Pp
+The following
+.Ar media
+types are supported:
+.Pp
+.Bl -tag -width autoselect -compact
+.It Cm autoselect
+Enable autoselection of the media type and options.
+.It Cm 10baseT
+Set 10Mbps operation.
+.It Cm 100baseTX
+Set 100Mbps (Fast Ethernet) operation.
+.El
+.Pp
+For more information on configuring this device, see
+.Xr ifconfig 8 .
+To view a list of media types and options supported by the card, try
+.Ic ifconfig <device> media .
+For example,
+.Ic ifconfig vte0 media .
+.Sh SEE ALSO
+.Xr arp 4 ,
+.Xr rdcphy 4 ,
+.Xr ifmedia 4 ,
+.Xr intro 4 ,
+.Xr netintro 4 ,
+.Xr pci 4 ,
+.Xr hostname.if 5 ,
+.Xr ifconfig 8
+.Sh HISTORY
+The
+.Nm
+device driver first appeared in
+.Ox 4.8 .
+.Sh AUTHORS
+.An -nosplit
+The
+.Nm
+driver was written by
+.An Pyun YongHyeon
+for
+.Fx
+and ported to
+.Ox
+by
+.An Kevin Lo
+.Aq kevlo@openbsd.org .
diff --git a/sys/dev/mii/files.mii b/sys/dev/mii/files.mii
index 866728f4b3e..e9d990ecaae 100644
--- a/sys/dev/mii/files.mii
+++ b/sys/dev/mii/files.mii
@@ -1,4 +1,4 @@
-#	$OpenBSD: files.mii,v 1.29 2008/09/26 10:35:15 jsg Exp $
+#	$OpenBSD: files.mii,v 1.30 2011/01/15 04:35:34 kevlo Exp $
 #	$NetBSD: files.mii,v 1.13 1998/11/05 00:36:48 thorpej Exp $
 
 file	dev/mii/mii.c				mii
@@ -136,3 +136,7 @@ file	dev/mii/jmphy.c				jmphy
 device	atphy: mii_phy
 attach	atphy at mii
 file	dev/mii/atphy.c				atphy
+
+device	rdcphy: mii_phy
+attach	rdcphy at mii
+file	dev/mii/rdcphy.c			rdcphy
diff --git a/sys/dev/mii/miidevs b/sys/dev/mii/miidevs
index e59a0d8c706..52e24ae7147 100644
--- a/sys/dev/mii/miidevs
+++ b/sys/dev/mii/miidevs
@@ -1,4 +1,4 @@
-$OpenBSD: miidevs,v 1.114 2010/11/23 06:59:27 kevlo Exp $
+$OpenBSD: miidevs,v 1.115 2011/01/15 04:35:34 kevlo Exp $
 /* $NetBSD: miidevs,v 1.3 1998/11/05 03:43:43 thorpej Exp $ */
 
 /*-
@@ -40,6 +40,7 @@ oui VITESSE			0x0001c1	Vitesse
 oui CICADA			0x0003f1	Cicada
 oui CENIX			0x000749	CENiX
 oui BROADCOM2			0x000af7	Broadcom
+oui RDC				0x000bb4	RDC Semi.
 oui ASIX			0x000ec6	ASIX
 oui BROADCOM			0x001018	Broadcom
 oui 3COM			0x00105a	3com
@@ -269,6 +270,9 @@ model PLESSEY NWK914		0x0000	NWK914 10/100 PHY
 /* Quality Semi. PHYs */
 model QUALITYSEMI QS6612	0x0000	QS6612 10/100 PHY
 
+/* RDC Semi. PHYs */
+model RDC R6040			0x0003	R6040 10/100 PHY
+
 /* Realtek PHYs */
 model xxREALTEK RTL8169S	0x0011	RTL8169S/8110S PHY
 model REALTEK RTL8201L		0x0020	RTL8201L 10/100 PHY
diff --git a/sys/dev/mii/rdcphy.c b/sys/dev/mii/rdcphy.c
new file mode 100644
index 00000000000..ab6488be66b
--- /dev/null
+++ b/sys/dev/mii/rdcphy.c
@@ -0,0 +1,310 @@
+/*	$OpenBSD: rdcphy.c,v 1.1 2011/01/15 04:35:34 kevlo Exp $	*/
+/*-
+ * Copyright (c) 2010, Pyun YongHyeon <yongari@FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice unmodified, this list of conditions, and the following
+ *    disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Driver for the RDC Semiconductor R6040 10/100 PHY.
+ */
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/device.h>
+#include <sys/socket.h>
+
+#include <net/if.h>
+#include <net/if_media.h>
+
+#include <dev/mii/mii.h>
+#include <dev/mii/miivar.h>
+#include <dev/mii/miidevs.h>
+
+#define	MII_RDCPHY_DEBUG	0x11
+#define	DEBUG_JABBER_DIS	0x0040
+#define	DEBUG_LOOP_BACK_10MBPS	0x0400
+
+#define	MII_RDCPHY_CTRL		0x14
+#define	CTRL_SQE_ENB		0x0100
+#define	CTRL_NEG_POLARITY	0x0400
+#define	CTRL_AUTO_POLARITY	0x0800
+#define	CTRL_MDIXSEL_RX		0x2000
+#define	CTRL_MDIXSEL_TX		0x4000
+#define	CTRL_AUTO_MDIX_DIS	0x8000
+
+#define	MII_RDCPHY_CTRL2	0x15
+#define	CTRL2_LED_DUPLEX	0x0000
+#define	CTRL2_LED_DUPLEX_COL	0x0008
+#define	CTRL2_LED_ACT		0x0010
+#define	CTRL2_LED_SPEED_ACT	0x0018
+#define	CTRL2_LED_BLK_100MBPS_DIS	0x0020
+#define	CTRL2_LED_BLK_10MBPS_DIS	0x0040
+#define	CTRL2_LED_BLK_LINK_ACT_DIS	0x0080
+#define	CTRL2_SDT_THRESH_MASK	0x3E00
+#define	CTRL2_TIMING_ERR_SEL	0x4000
+#define	CTRL2_LED_BLK_80MS	0x8000
+#define	CTRL2_LED_BLK_160MS	0x0000
+#define	CTRL2_LED_MASK		0x0018
+
+#define	MII_RDCPHY_STATUS	0x16
+#define	STATUS_AUTO_MDIX_RX	0x0200
+#define	STATUS_AUTO_MDIX_TX	0x0400
+#define	STATUS_NEG_POLARITY	0x0800
+#define	STATUS_FULL_DUPLEX	0x1000
+#define	STATUS_SPEED_10		0x0000
+#define	STATUS_SPEED_100	0x2000
+#define	STATUS_SPEED_MASK	0x6000
+#define	STATUS_LINK_UP		0x8000
+
+/* Analog test register 2 */
+#define	MII_RDCPHY_TEST2	0x1A
+#define	TEST2_PWR_DOWN		0x0200
+
+struct rdcphy_softc {
+	struct mii_softc sc_mii;
+	int mii_link_tick;
+#define	RDCPHY_MANNEG_TICK	3
+};
+
+int	rdcphy_service(struct mii_softc *, struct mii_data *, int);
+void	rdcphy_attach(struct device *, struct device *, void *);
+int	rdcphy_match(struct device *, void *, void *);
+void	rdcphy_status(struct mii_softc *);
+
+const struct mii_phy_funcs rdcphy_funcs = {
+	rdcphy_service, rdcphy_status, mii_phy_reset,
+};
+
+static const struct mii_phydesc rdcphys[] = {
+	{ MII_OUI_RDC,		MII_MODEL_RDC_R6040,
+	  MII_STR_RDC_R6040 },
+	{ 0,			0,
+	  NULL },
+};
+
+struct cfattach rdcphy_ca = {
+	sizeof(struct rdcphy_softc), rdcphy_match, rdcphy_attach,
+	mii_phy_detach, mii_phy_activate
+};
+
+struct cfdriver rdcphy_cd = {
+	NULL, "rdcphy", DV_DULL
+};
+
+int
+rdcphy_match(struct device *parent, void *match, void *aux)
+{
+	struct mii_attach_args *ma = aux;
+
+	if (mii_phy_match(ma, rdcphys) != NULL)
+		return (10);
+
+	return (0);
+}
+
+void
+rdcphy_attach(struct device *parent, struct device *self, void *aux)
+{
+	struct rdcphy_softc *sc = (struct rdcphy_softc *)self;
+	struct mii_attach_args *ma = aux;
+	struct mii_data *mii = ma->mii_data;
+	const struct mii_phydesc *mpd;
+
+	mpd = mii_phy_match(ma, rdcphys);
+	printf(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2));
+
+	sc->sc_mii.mii_inst = mii->mii_instance;
+	sc->sc_mii.mii_phy = ma->mii_phyno;
+	sc->sc_mii.mii_funcs = &rdcphy_funcs;
+	sc->sc_mii.mii_pdata = mii;
+	sc->sc_mii.mii_flags = ma->mii_flags;
+
+	PHY_RESET(&sc->sc_mii);
+
+	sc->sc_mii.mii_capabilities = 
+	    PHY_READ(&sc->sc_mii, MII_BMSR) & ma->mii_capmask;
+	if (sc->sc_mii.mii_capabilities & BMSR_EXTSTAT)
+		sc->sc_mii.mii_extcapabilities = 
+		    PHY_READ(&sc->sc_mii, MII_EXTSR);
+
+	if (sc->sc_mii.mii_capabilities & BMSR_MEDIAMASK)
+		mii_phy_add_media(&sc->sc_mii);
+}
+
+int
+rdcphy_service(struct mii_softc *self, struct mii_data *mii, int cmd)
+{
+	struct rdcphy_softc *sc = (struct rdcphy_softc *)self;
+	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
+	int reg;
+
+	if ((sc->sc_mii.mii_dev.dv_flags & DVF_ACTIVE) == 0)
+		return (ENXIO);
+
+	switch (cmd) {
+	case MII_POLLSTAT:
+		/*
+		 * If we're not polling our PHY instance, just return.
+		 */
+		if (IFM_INST(ife->ifm_media) != sc->sc_mii.mii_inst)
+			return (0);
+		break;
+
+	case MII_MEDIACHG:
+		/*
+		 * If the media indicates a different PHY instance,
+		 * isolate ourselves.
+		 */
+		if (IFM_INST(ife->ifm_media) != sc->sc_mii.mii_inst) {
+			reg = PHY_READ(&sc->sc_mii, MII_BMCR);
+			PHY_WRITE(&sc->sc_mii, MII_BMCR, reg | BMCR_ISO);
+			return (0);
+		}
+
+		/*
+		 * If the interface is not up, don't do anything.
+		 */
+		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
+			break;
+
+		mii_phy_setmedia(&sc->sc_mii);
+		switch (IFM_SUBTYPE(ife->ifm_media)) {
+		case IFM_100_TX:
+		case IFM_10_T:
+			/*
+			 * Report fake lost link event to parent
+			 * driver.  This will stop MAC of parent
+			 * driver and make it possible to reconfigure
+			 * MAC after completion of link establishment.
+			 * Note, the parent MAC seems to require
+			 * restarting MAC when underlying any PHY
+			 * configuration was changed even if the
+			 * resolved speed/duplex was not changed at
+			 * all.
+			 */
+			mii->mii_media_status = 0;
+			mii->mii_media_active = IFM_ETHER | IFM_NONE;
+			sc->mii_link_tick = RDCPHY_MANNEG_TICK;
+			/* Immediately report link down. */
+			mii_phy_update(&sc->sc_mii, MII_MEDIACHG);
+			return (0);
+		default:
+			break;
+		}
+		break;
+
+	case MII_TICK:
+		/*
+		 * If we're not currently selected, just return.
+		 */
+		if (IFM_INST(ife->ifm_media) != sc->sc_mii.mii_inst)
+			return (0);
+
+		if (mii_phy_tick(&sc->sc_mii) == EJUSTRETURN)
+			return (0);
+
+		if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) {
+			/*
+			 * It seems the PHY hardware does not correctly
+			 * report link status changes when manual link
+			 * configuration is in progress.  It is also
+			 * possible for the PHY to complete establishing
+			 * a link within one second such that mii(4)
+			 * did not notice the link change.  To workaround
+			 * the issue, emulate lost link event and wait
+			 * for 3 seconds when manual link configuration
+			 * is in progress.  3 seconds would be long
+			 * enough to absorb transient link flips.
+			 */
+			if (sc->mii_link_tick > 0) {
+				sc->mii_link_tick--;
+				return (0);
+			}
+		}
+		break;
+	}
+
+	/* Update the media status. */
+	mii_phy_status(&sc->sc_mii);
+
+	/* Callback if something changed. */
+	mii_phy_update(&sc->sc_mii, cmd);
+	return (0);
+}
+
+void
+rdcphy_status(struct mii_softc *sc)
+{
+	struct mii_data *mii = sc->mii_pdata;
+	struct ifmedia_entry *ife;
+	int bmsr, bmcr, physts;
+
+	ife = mii->mii_media.ifm_cur;
+
+	mii->mii_media_status = IFM_AVALID;
+	mii->mii_media_active = IFM_ETHER;
+
+	bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
+	physts = PHY_READ(sc, MII_RDCPHY_STATUS);
+
+	if (physts & STATUS_LINK_UP)
+		mii->mii_media_status |= IFM_ACTIVE;
+
+	bmcr = PHY_READ(sc, MII_BMCR);
+	if (bmcr & BMCR_ISO) {
+		mii->mii_media_active |= IFM_NONE;
+		mii->mii_media_status = 0;
+		return;
+	}
+
+	if (bmcr & BMCR_LOOP)
+		mii->mii_media_active |= IFM_LOOP;
+
+	if (bmcr & BMCR_AUTOEN) {
+		if (!(bmsr & BMSR_ACOMP)) {
+			/* Erg, still trying, I guess... */
+			mii->mii_media_active |= IFM_NONE;
+			return;
+		}
+	}
+
+	switch (physts & STATUS_SPEED_MASK) {
+	case STATUS_SPEED_100:
+		mii->mii_media_active |= IFM_100_TX;
+		break;
+	case STATUS_SPEED_10:
+		mii->mii_media_active |= IFM_10_T;
+		break;
+	default:
+		mii->mii_media_active |= IFM_NONE;
+		return;
+	}
+	if ((physts & STATUS_FULL_DUPLEX) != 0)
+		mii->mii_media_active |= IFM_FDX | 
+		    mii_phy_flowstatus(sc);
+	else
+		mii->mii_media_active |= IFM_HDX;
+}
diff --git a/sys/dev/pci/files.pci b/sys/dev/pci/files.pci
index d43bb0ec80a..25780271001 100644
--- a/sys/dev/pci/files.pci
+++ b/sys/dev/pci/files.pci
@@ -1,4 +1,4 @@
-#	$OpenBSD: files.pci,v 1.276 2010/10/14 21:23:04 pirofti Exp $
+#	$OpenBSD: files.pci,v 1.277 2011/01/15 04:35:34 kevlo Exp $
 #	$NetBSD: files.pci,v 1.20 1996/09/24 17:47:15 christos Exp $
 #
 # Config file and device description for machine-independent PCI code.
@@ -308,6 +308,11 @@ device	vr: ether, ifnet, mii, ifmedia
 attach	vr at pci
 file	dev/pci/if_vr.c			vr
 
+# RDC R6040
+device	vte: ether, ifnet, mii, ifmedia, mii_phy
+attach	vte at pci
+file	dev/pci/if_vte.c		vte
+
 # Texas Instruments ThunderLAN
 device	tl: ether, ifnet, mii, ifmedia
 attach	tl at pci
diff --git a/sys/dev/pci/if_vte.c b/sys/dev/pci/if_vte.c
new file mode 100644
index 00000000000..376fd723a48
--- /dev/null
+++ b/sys/dev/pci/if_vte.c
@@ -0,0 +1,1518 @@
+/*	$OpenBSD: if_vte.c,v 1.1 2011/01/15 04:35:34 kevlo Exp $	*/
+/*-
+ * Copyright (c) 2010, Pyun YongHyeon <yongari@FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice unmodified, this list of conditions, and the following
+ *    disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/* Driver for DM&P Electronics, Inc, Vortex86 RDC R6040 FastEthernet. */
+
+#include "bpfilter.h"
+#include "vlan.h"
+
+#include <sys/param.h>
+#include <sys/endian.h>
+#include <sys/systm.h>
+#include <sys/types.h>
+#include <sys/sockio.h>
+#include <sys/mbuf.h>
+#include <sys/queue.h>
+#include <sys/kernel.h>
+#include <sys/device.h>
+#include <sys/timeout.h>
+#include <sys/socket.h>
+
+#include <machine/bus.h>
+
+#include <net/if.h>
+#include <net/if_dl.h>
+#include <net/if_llc.h>
+#include <net/if_media.h>
+
+#ifdef INET
+#include <netinet/in.h>
+#include <netinet/in_systm.h>
+#include <netinet/in_var.h>
+#include <netinet/ip.h>
+#include <netinet/if_ether.h>
+#endif
+
+#include <net/if_types.h>
+#include <net/if_vlan_var.h>
+
+#if NBPFILTER > 0
+#include <net/bpf.h>
+#endif
+
+#include <dev/rndvar.h>
+
+#include <dev/mii/mii.h>
+#include <dev/mii/miivar.h>
+
+#include <dev/pci/pcireg.h>
+#include <dev/pci/pcivar.h>
+#include <dev/pci/pcidevs.h>
+
+#include <dev/pci/if_vtereg.h>
+
+int	vte_match(struct device *, void *, void *);
+void	vte_attach(struct device *, struct device *, void *);
+int	vte_detach(struct device *, int);
+
+int	vte_miibus_readreg(struct device *, int, int);
+void	vte_miibus_writereg(struct device *, int, int, int);
+void	vte_miibus_statchg(struct device *);
+
+int	vte_init(struct ifnet *);
+void	vte_start(struct ifnet *);
+int	vte_ioctl(struct ifnet *, u_long, caddr_t);
+void	vte_watchdog(struct ifnet *);
+int	vte_mediachange(struct ifnet *);
+void	vte_mediastatus(struct ifnet *, struct ifmediareq *);
+
+int	vte_intr(void *);
+int	vte_dma_alloc(struct vte_softc *);
+void	vte_dma_free(struct vte_softc *);
+struct vte_txdesc *
+	    vte_encap(struct vte_softc *, struct mbuf **);
+void	vte_get_macaddr(struct vte_softc *);
+int	vte_init_rx_ring(struct vte_softc *);
+int	vte_init_tx_ring(struct vte_softc *);
+void	vte_mac_config(struct vte_softc *);
+int	vte_newbuf(struct vte_softc *, struct vte_rxdesc *, int);
+void	vte_reset(struct vte_softc *);
+void	vte_rxeof(struct vte_softc *);
+void	vte_iff(struct vte_softc *);
+void	vte_start_mac(struct vte_softc *);
+void	vte_stats_clear(struct vte_softc *);
+void	vte_stats_update(struct vte_softc *);
+void	vte_stop(struct vte_softc *);
+void	vte_stop_mac(struct vte_softc *);
+void	vte_tick(void *);
+void	vte_txeof(struct vte_softc *);
+
+const struct pci_matchid vte_devices[] = {
+	{ PCI_VENDOR_RDC, PCI_PRODUCT_RDC_R6040_ETHER }
+};
+
+struct cfattach vte_ca = {
+	sizeof(struct vte_softc), vte_match, vte_attach
+};
+
+struct cfdriver vte_cd = {
+	NULL, "vte", DV_IFNET
+};
+
+int vtedebug = 0;
+#define	DPRINTF(x)	do { if (vtedebug) printf x; } while (0)
+
+int
+vte_miibus_readreg(struct device *dev, int phy, int reg)
+{
+	struct vte_softc *sc = (struct vte_softc *)dev;
+	int i;
+
+	CSR_WRITE_2(sc, VTE_MMDIO, MMDIO_READ |
+	    (phy << MMDIO_PHY_ADDR_SHIFT) | (reg << MMDIO_REG_ADDR_SHIFT));
+	for (i = VTE_PHY_TIMEOUT; i > 0; i--) {
+		DELAY(5);
+		if ((CSR_READ_2(sc, VTE_MMDIO) & MMDIO_READ) == 0)
+			break;
+	}
+
+	if (i == 0) {
+		printf("%s: phy read timeout: phy %d, reg %d\n",
+		    sc->sc_dev.dv_xname, phy, reg);
+		return (0);
+	}
+
+	return (CSR_READ_2(sc, VTE_MMRD));
+}
+
+void
+vte_miibus_writereg(struct device *dev, int phy, int reg, int val)
+{
+	struct vte_softc *sc = (struct vte_softc *)dev;
+	int i;
+
+	CSR_WRITE_2(sc, VTE_MMWD, val);
+	CSR_WRITE_2(sc, VTE_MMDIO, MMDIO_WRITE |
+	    (phy << MMDIO_PHY_ADDR_SHIFT) | (reg << MMDIO_REG_ADDR_SHIFT));
+	for (i = VTE_PHY_TIMEOUT; i > 0; i--) {
+		DELAY(5);
+		if ((CSR_READ_2(sc, VTE_MMDIO) & MMDIO_WRITE) == 0)
+			break;
+	}
+
+	if (i == 0)
+		printf("%s: phy write timeout: phy %d, reg %d\n",
+		    sc->sc_dev.dv_xname, phy, reg);
+}
+
+void
+vte_miibus_statchg(struct device *dev)
+{
+	struct vte_softc *sc = (struct vte_softc *)dev;
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	struct mii_data *mii;
+	uint16_t val;
+
+	if ((ifp->if_flags & IFF_RUNNING) == 0)
+		return;
+
+	mii = &sc->sc_miibus;
+
+	sc->vte_flags &= ~VTE_FLAG_LINK;
+	if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
+	    (IFM_ACTIVE | IFM_AVALID)) {
+		switch (IFM_SUBTYPE(mii->mii_media_active)) {
+		case IFM_10_T:
+		case IFM_100_TX:
+			sc->vte_flags |= VTE_FLAG_LINK;
+			break;
+		default:
+			break;
+		}
+	}
+
+	/* Stop RX/TX MACs. */
+	vte_stop_mac(sc);
+	/* Program MACs with resolved duplex and flow control. */
+	if ((sc->vte_flags & VTE_FLAG_LINK) != 0) {
+		/*
+		 * Timer waiting time : (63 + TIMER * 64) MII clock.
+		 * MII clock : 25MHz(100Mbps) or 2.5MHz(10Mbps).
+		 */
+		if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX)
+			val = 18 << VTE_IM_TIMER_SHIFT;
+		else
+			val = 1 << VTE_IM_TIMER_SHIFT;
+		sc->vte_int_rx_mod = VTE_IM_RX_BUNDLE_DEFAULT;
+		val |= sc->vte_int_rx_mod << VTE_IM_BUNDLE_SHIFT;
+		/* 48.6us for 100Mbps, 50.8us for 10Mbps */
+		CSR_WRITE_2(sc, VTE_MRICR, val);
+
+		if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX)
+			val = 18 << VTE_IM_TIMER_SHIFT;
+		else
+			val = 1 << VTE_IM_TIMER_SHIFT;
+		sc->vte_int_tx_mod = VTE_IM_TX_BUNDLE_DEFAULT;
+		val |= sc->vte_int_tx_mod << VTE_IM_BUNDLE_SHIFT;
+		/* 48.6us for 100Mbps, 50.8us for 10Mbps */
+		CSR_WRITE_2(sc, VTE_MTICR, val);
+
+		vte_mac_config(sc);
+		vte_start_mac(sc);
+	}
+}
+
+void
+vte_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
+{
+	struct vte_softc *sc = ifp->if_softc;
+	struct mii_data *mii = &sc->sc_miibus;
+
+	mii_pollstat(mii);
+	ifmr->ifm_status = mii->mii_media_status;
+	ifmr->ifm_active = mii->mii_media_active;
+}
+
+int
+vte_mediachange(struct ifnet *ifp)
+{
+	struct vte_softc *sc = ifp->if_softc;
+	struct mii_data *mii = &sc->sc_miibus;
+	int error;
+
+	if (mii->mii_instance != 0) {
+		struct mii_softc *miisc;
+
+		LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
+			mii_phy_reset(miisc);
+	}
+	error = mii_mediachg(mii);
+
+	return (error);
+}
+
+int
+vte_match(struct device *dev, void *match, void *aux)
+{
+	return pci_matchbyid((struct pci_attach_args *)aux, vte_devices,
+	    sizeof(vte_devices) / sizeof(vte_devices[0]));
+}
+
+void
+vte_get_macaddr(struct vte_softc *sc)
+{
+	uint16_t mid;
+
+	/*
+	 * It seems there is no way to reload station address and
+	 * it is supposed to be set by BIOS.
+	 */
+	mid = CSR_READ_2(sc, VTE_MID0L);
+	sc->vte_eaddr[0] = (mid >> 0) & 0xFF;
+	sc->vte_eaddr[1] = (mid >> 8) & 0xFF;
+	mid = CSR_READ_2(sc, VTE_MID0M);
+	sc->vte_eaddr[2] = (mid >> 0) & 0xFF;
+	sc->vte_eaddr[3] = (mid >> 8) & 0xFF;
+	mid = CSR_READ_2(sc, VTE_MID0H);
+	sc->vte_eaddr[4] = (mid >> 0) & 0xFF;
+	sc->vte_eaddr[5] = (mid >> 8) & 0xFF;
+}
+
+void
+vte_attach(struct device *parent, struct device *self, void *aux)
+{
+	struct vte_softc *sc = (struct vte_softc *)self;
+	struct pci_attach_args *pa = aux;
+	pci_chipset_tag_t pc = pa->pa_pc;
+	pci_intr_handle_t ih;
+	const char *intrstr;
+	struct ifnet *ifp;
+	pcireg_t memtype;
+	int error = 0;
+
+	memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, VTE_PCI_LOMEM);
+	if (pci_mapreg_map(pa, VTE_PCI_LOMEM, memtype, 0, &sc->sc_mem_bt,
+	    &sc->sc_mem_bh, NULL, &sc->sc_mem_size, 0)) {
+		printf(": can't map mem space\n");
+		return;
+	}
+
+	if (pci_intr_map(pa, &ih) != 0) {
+		printf(": can't map interrupt\n");
+		goto fail;
+	}
+
+  	/*
+	 * Allocate IRQ
+	 */
+	intrstr = pci_intr_string(pc, ih);
+	sc->sc_irq_handle = pci_intr_establish(pc, ih, IPL_NET, vte_intr, sc,
+	    sc->sc_dev.dv_xname);
+	if (sc->sc_irq_handle == NULL) {
+		printf(": could not establish interrupt");
+		if (intrstr != NULL)
+			printf(" at %s", intrstr);
+		printf("\n");
+		goto fail;
+	}
+	printf(": %s", intrstr);
+
+	sc->sc_dmat = pa->pa_dmat;
+	sc->sc_pct = pa->pa_pc;
+	sc->sc_pcitag = pa->pa_tag;
+
+	/* Reset the ethernet controller. */
+	vte_reset(sc);
+
+	error = vte_dma_alloc(sc);
+	if (error)
+		goto fail;
+
+	/* Load station address. */
+	vte_get_macaddr(sc);
+
+	ifp = &sc->sc_arpcom.ac_if;
+	ifp->if_softc = sc;
+	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
+	ifp->if_ioctl = vte_ioctl;
+	ifp->if_start = vte_start;
+	ifp->if_watchdog = vte_watchdog;
+	ifp->if_baudrate = IF_Mbps(100);
+	IFQ_SET_MAXLEN(&ifp->if_snd, VTE_TX_RING_CNT - 1);
+	IFQ_SET_READY(&ifp->if_snd);
+	bcopy(sc->vte_eaddr, sc->sc_arpcom.ac_enaddr, ETHER_ADDR_LEN);
+	bcopy(sc->sc_dev.dv_xname, ifp->if_xname, IFNAMSIZ);
+
+	ifp->if_capabilities = IFCAP_VLAN_MTU;
+
+	printf(", address %s\n", ether_sprintf(sc->sc_arpcom.ac_enaddr));
+
+	/*
+	 * Set up MII bus.
+	 * BIOS would have initialized VTE_MPSCCR to catch PHY
+	 * status changes so driver may be able to extract
+	 * configured PHY address.  Since it's common to see BIOS
+	 * fails to initialize the register(including the sample
+	 * board I have), let mii(4) probe it.  This is more
+	 * reliable than relying on BIOS's initialization.
+	 *
+	 * Advertising flow control capability to mii(4) was
+	 * intentionally disabled due to severe problems in TX
+	 * pause frame generation.  See vte_rxeof() for more
+	 * details.
+	 */
+	sc->sc_miibus.mii_ifp = ifp;
+	sc->sc_miibus.mii_readreg = vte_miibus_readreg;
+	sc->sc_miibus.mii_writereg = vte_miibus_writereg;
+	sc->sc_miibus.mii_statchg = vte_miibus_statchg;
+	
+	ifmedia_init(&sc->sc_miibus.mii_media, 0, vte_mediachange,
+	    vte_mediastatus);
+	mii_attach(self, &sc->sc_miibus, 0xffffffff, MII_PHY_ANY,
+	    MII_OFFSET_ANY, 0);
+
+	if (LIST_FIRST(&sc->sc_miibus.mii_phys) == NULL) {
+		printf("%s: no PHY found!\n", sc->sc_dev.dv_xname);
+		ifmedia_add(&sc->sc_miibus.mii_media, IFM_ETHER | IFM_MANUAL,
+		    0, NULL);
+		ifmedia_set(&sc->sc_miibus.mii_media, IFM_ETHER | IFM_MANUAL);
+	} else
+		ifmedia_set(&sc->sc_miibus.mii_media, IFM_ETHER | IFM_AUTO);
+
+	if_attach(ifp);
+	ether_ifattach(ifp);
+
+	timeout_set(&sc->vte_tick_ch, vte_tick, sc);
+	return;
+fail:
+	vte_detach(&sc->sc_dev, 0);
+}
+
+int
+vte_detach(struct device *self, int flags)
+{
+	struct vte_softc *sc = (struct vte_softc *)self;
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	int s;
+
+	s = splnet();
+	vte_stop(sc);
+	splx(s);
+
+	mii_detach(&sc->sc_miibus, MII_PHY_ANY, MII_OFFSET_ANY);
+
+	/* Delete all remaining media. */
+	ifmedia_delete_instance(&sc->sc_miibus.mii_media, IFM_INST_ANY);
+	
+	ether_ifdetach(ifp);
+	if_detach(ifp);
+	vte_dma_free(sc);
+
+	if (sc->sc_irq_handle != NULL) {
+		pci_intr_disestablish(sc->sc_pct, sc->sc_irq_handle);
+		sc->sc_irq_handle = NULL;
+	}
+
+	return (0);
+}
+
+int
+vte_dma_alloc(struct vte_softc *sc)
+{
+	struct vte_txdesc *txd;
+	struct vte_rxdesc *rxd;
+	int error, i, nsegs;
+
+	/* Create DMA stuffs for TX ring */
+	error = bus_dmamap_create(sc->sc_dmat, VTE_TX_RING_SZ, 1,
+	    VTE_TX_RING_SZ, 0, BUS_DMA_NOWAIT, &sc->vte_cdata.vte_tx_ring_map);
+	if (error)
+		return (ENOBUFS);
+
+	/* Allocate DMA'able memory for TX ring */
+	error = bus_dmamem_alloc(sc->sc_dmat, VTE_TX_RING_SZ, ETHER_ALIGN,
+	    0, &sc->vte_cdata.vte_tx_ring_seg, 1, &nsegs, 
+	    BUS_DMA_WAITOK | BUS_DMA_ZERO);
+	if (error) {
+		printf("%s: could not allocate DMA'able memory for Tx ring.\n",
+		    sc->sc_dev.dv_xname);
+		return (error);
+	}
+
+	error = bus_dmamem_map(sc->sc_dmat, &sc->vte_cdata.vte_tx_ring_seg,
+	    nsegs, VTE_TX_RING_SZ, (caddr_t *)&sc->vte_cdata.vte_tx_ring,
+	    BUS_DMA_NOWAIT);
+	if (error)
+		return (ENOBUFS);
+
+	/*  Load the DMA map for Tx ring. */
+	error = bus_dmamap_load(sc->sc_dmat, sc->vte_cdata.vte_tx_ring_map,
+	    sc->vte_cdata.vte_tx_ring, VTE_TX_RING_SZ, NULL, BUS_DMA_WAITOK);
+	if (error) {
+		printf("%s: could not load DMA'able memory for Tx ring.\n",
+		    sc->sc_dev.dv_xname);
+		bus_dmamem_free(sc->sc_dmat,
+		    (bus_dma_segment_t *)&sc->vte_cdata.vte_tx_ring, 1);
+		return (error);
+	}
+
+	sc->vte_cdata.vte_tx_ring_paddr = 
+	    sc->vte_cdata.vte_tx_ring_map->dm_segs[0].ds_addr;
+
+	/* Create DMA stuffs for RX ring */
+	error = bus_dmamap_create(sc->sc_dmat, VTE_RX_RING_SZ, 1,
+	    VTE_RX_RING_SZ, 0, BUS_DMA_NOWAIT, &sc->vte_cdata.vte_rx_ring_map);
+	if (error)
+		return (ENOBUFS);
+
+	/* Allocate DMA'able memory for RX ring */
+	error = bus_dmamem_alloc(sc->sc_dmat, VTE_RX_RING_SZ, ETHER_ALIGN,
+	    0, &sc->vte_cdata.vte_rx_ring_seg, 1, &nsegs,
+	    BUS_DMA_WAITOK | BUS_DMA_ZERO);
+	if (error) {
+		printf("%s: could not allocate DMA'able memory for Rx ring.\n",
+		    sc->sc_dev.dv_xname);
+		return (error);
+	}
+
+	error = bus_dmamem_map(sc->sc_dmat, &sc->vte_cdata.vte_rx_ring_seg,
+	    nsegs, VTE_RX_RING_SZ, (caddr_t *)&sc->vte_cdata.vte_rx_ring,
+	    BUS_DMA_NOWAIT);
+	if (error)
+		return (ENOBUFS);
+
+	/* Load the DMA map for Rx ring. */
+	error = bus_dmamap_load(sc->sc_dmat, sc->vte_cdata.vte_rx_ring_map,
+	    sc->vte_cdata.vte_rx_ring, VTE_RX_RING_SZ, NULL, BUS_DMA_WAITOK);
+	if (error) {
+		printf("%s: could not load DMA'able memory for Rx ring.\n",
+		    sc->sc_dev.dv_xname);
+		bus_dmamem_free(sc->sc_dmat,
+		    (bus_dma_segment_t *)sc->vte_cdata.vte_rx_ring, 1);
+		return (error);
+	}
+
+	sc->vte_cdata.vte_rx_ring_paddr =
+	    sc->vte_cdata.vte_rx_ring_map->dm_segs[0].ds_addr;
+
+	/* Create DMA maps for Tx buffers. */
+	for (i = 0; i < VTE_TX_RING_CNT; i++) {
+		txd = &sc->vte_cdata.vte_txdesc[i];
+		txd->tx_m = NULL;
+		txd->tx_dmamap = NULL;
+		error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
+		    MCLBYTES, 0, BUS_DMA_NOWAIT, &txd->tx_dmamap);
+		if (error) {
+			printf("%s: could not create Tx dmamap.\n",
+			    sc->sc_dev.dv_xname);
+			return (error);
+		}
+	}
+
+	/* Create DMA maps for Rx buffers. */
+	error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES, 0,
+	    BUS_DMA_NOWAIT, &sc->vte_cdata.vte_rx_sparemap);
+	if (error) {
+		printf("%s: could not create spare Rx dmamap.\n",
+		    sc->sc_dev.dv_xname);
+		return (error);
+	}
+	for (i = 0; i < VTE_RX_RING_CNT; i++) {
+		rxd = &sc->vte_cdata.vte_rxdesc[i];
+		rxd->rx_m = NULL;
+		rxd->rx_dmamap = NULL;
+		error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
+		    MCLBYTES, 0, BUS_DMA_NOWAIT, &rxd->rx_dmamap);
+		if (error) {
+			printf("%s: could not create Rx dmamap.\n",
+			    sc->sc_dev.dv_xname);
+			return (error);
+		}
+	}
+
+	return (0);
+}
+
+void
+vte_dma_free(struct vte_softc *sc)
+{
+	struct vte_txdesc *txd;
+	struct vte_rxdesc *rxd;
+	int i;
+
+	/* TX buffers. */
+	for (i = 0; i < VTE_TX_RING_CNT; i++) {
+		txd = &sc->vte_cdata.vte_txdesc[i];
+		if (txd->tx_dmamap != NULL) {
+			bus_dmamap_destroy(sc->sc_dmat, txd->tx_dmamap);
+			txd->tx_dmamap = NULL;
+		}
+	}
+	/* Rx buffers */
+	for (i = 0; i < VTE_RX_RING_CNT; i++) {
+		rxd = &sc->vte_cdata.vte_rxdesc[i];
+		if (rxd->rx_dmamap != NULL) {
+			bus_dmamap_destroy(sc->sc_dmat, rxd->rx_dmamap);
+			rxd->rx_dmamap = NULL;
+		}
+	}
+	if (sc->vte_cdata.vte_rx_sparemap != NULL) {
+		bus_dmamap_destroy(sc->sc_dmat, sc->vte_cdata.vte_rx_sparemap);
+		sc->vte_cdata.vte_rx_sparemap = NULL;
+	}
+	/* TX descriptor ring. */
+	if (sc->vte_cdata.vte_tx_ring_map != NULL)
+		bus_dmamap_unload(sc->sc_dmat, sc->vte_cdata.vte_tx_ring_map);
+	if (sc->vte_cdata.vte_tx_ring_map != NULL &&
+	    sc->vte_cdata.vte_tx_ring != NULL)
+		bus_dmamem_free(sc->sc_dmat,
+		    (bus_dma_segment_t *)sc->vte_cdata.vte_tx_ring, 1);
+	sc->vte_cdata.vte_tx_ring = NULL;
+	sc->vte_cdata.vte_tx_ring_map = NULL;
+	/* RX ring. */
+	if (sc->vte_cdata.vte_rx_ring_map != NULL)
+		bus_dmamap_unload(sc->sc_dmat, sc->vte_cdata.vte_rx_ring_map);
+	if (sc->vte_cdata.vte_rx_ring_map != NULL &&
+	    sc->vte_cdata.vte_rx_ring != NULL)
+		bus_dmamem_free(sc->sc_dmat,
+		    (bus_dma_segment_t *)sc->vte_cdata.vte_rx_ring, 1);
+	sc->vte_cdata.vte_rx_ring = NULL;
+	sc->vte_cdata.vte_rx_ring_map = NULL;
+}
+
+struct vte_txdesc *
+vte_encap(struct vte_softc *sc, struct mbuf **m_head)
+{
+	struct vte_txdesc *txd;
+	struct mbuf *m, *n;
+	int copy, error, padlen;
+
+	txd = &sc->vte_cdata.vte_txdesc[sc->vte_cdata.vte_tx_prod];
+	m = *m_head;
+	/*
+	 * Controller doesn't auto-pad, so we have to make sure pad
+	 * short frames out to the minimum frame length.
+	 */
+	if (m->m_pkthdr.len < VTE_MIN_FRAMELEN)
+		padlen = VTE_MIN_FRAMELEN - m->m_pkthdr.len;
+	else
+		padlen = 0;
+
+	/*
+	 * Controller does not support multi-fragmented TX buffers.
+	 * Controller spends most of its TX processing time in
+	 * de-fragmenting TX buffers.  Either faster CPU or more
+	 * advanced controller DMA engine is required to speed up
+	 * TX path processing.
+	 * To mitigate the de-fragmenting issue, perform deep copy
+	 * from fragmented mbuf chains to a pre-allocated mbuf
+	 * cluster with extra cost of kernel memory.  For frames
+	 * that is composed of single TX buffer, the deep copy is
+	 * bypassed.
+	 */
+	copy = 0;
+	if (m->m_next != NULL)
+		copy++;
+	if (padlen > 0 && (padlen > M_TRAILINGSPACE(m)))
+		copy++;
+	if (copy != 0) {
+		/* Avoid expensive m_defrag(9) and do deep copy. */
+		n = sc->vte_cdata.vte_txmbufs[sc->vte_cdata.vte_tx_prod];
+		m_copydata(m, 0, m->m_pkthdr.len, mtod(n, char *));
+		n->m_pkthdr.len = m->m_pkthdr.len;
+		n->m_len = m->m_pkthdr.len;
+		m = n;
+		txd->tx_flags |= VTE_TXMBUF;
+	}
+
+	if (padlen > 0) {
+		/* Zero out the bytes in the pad area. */
+		bzero(mtod(m, char *) + m->m_pkthdr.len, padlen);
+		m->m_pkthdr.len += padlen;
+		m->m_len = m->m_pkthdr.len;
+	}
+
+	error = bus_dmamap_load_mbuf(sc->sc_dmat, txd->tx_dmamap, m, 
+	    BUS_DMA_NOWAIT);
+
+	if (error != 0) {
+		txd->tx_flags &= ~VTE_TXMBUF;
+		return (NULL);
+	}
+
+	bus_dmamap_sync(sc->sc_dmat, txd->tx_dmamap, 0, 
+	    txd->tx_dmamap->dm_mapsize, BUS_DMASYNC_PREWRITE);
+
+	txd->tx_desc->dtlen = 
+	    htole16(VTE_TX_LEN(txd->tx_dmamap->dm_segs[0].ds_len));
+	txd->tx_desc->dtbp = htole32(txd->tx_dmamap->dm_segs[0].ds_addr);
+	sc->vte_cdata.vte_tx_cnt++;
+	/* Update producer index. */
+	VTE_DESC_INC(sc->vte_cdata.vte_tx_prod, VTE_TX_RING_CNT);
+
+	/* Finally hand over ownership to controller. */
+	txd->tx_desc->dtst = htole16(VTE_DTST_TX_OWN);
+	txd->tx_m = m;
+
+	return (txd);
+}
+
+void
+vte_start(struct ifnet *ifp)
+{
+	struct vte_softc *sc = ifp->if_softc;
+	struct vte_txdesc *txd;
+	struct mbuf *m_head;
+	int enq = 0;
+
+	if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
+		return;
+
+	for (;;) {
+		/* Reserve one free TX descriptor. */
+		if (sc->vte_cdata.vte_tx_cnt >= VTE_TX_RING_CNT - 1) {
+			ifp->if_flags |= IFF_OACTIVE;
+			break;
+		}
+		IFQ_DEQUEUE(&ifp->if_snd, m_head);
+		if (m_head == NULL)
+			break;
+
+		/*
+		 * Pack the data into the transmit ring. If we
+		 * don't have room, set the OACTIVE flag and wait
+		 * for the NIC to drain the ring.
+		 */
+		if ((txd = vte_encap(sc, &m_head)) == NULL) {
+			break;
+		}
+
+		enq++;
+
+#if NBPFILTER > 0
+		/*
+		 * If there's a BPF listener, bounce a copy of this frame
+		 * to him.
+		 */
+		if (ifp->if_bpf != NULL)
+			bpf_mtap_ether(ifp->if_bpf, m_head, BPF_DIRECTION_OUT);
+#endif
+		/* Free consumed TX frame. */
+		if ((txd->tx_flags & VTE_TXMBUF) != 0)
+			m_freem(m_head);
+	}
+
+	if (enq > 0) {
+		bus_dmamap_sync(sc->sc_dmat, sc->vte_cdata.vte_tx_ring_map, 0,
+		    sc->vte_cdata.vte_tx_ring_map->dm_mapsize,
+		    BUS_DMASYNC_PREWRITE);
+		CSR_WRITE_2(sc, VTE_TX_POLL, TX_POLL_START);
+		ifp->if_timer = VTE_TX_TIMEOUT;
+	}
+}
+
+void
+vte_watchdog(struct ifnet *ifp)
+{
+	struct vte_softc *sc = ifp->if_softc;
+
+	printf("%s: watchdog timeout\n", sc->sc_dev.dv_xname);
+	ifp->if_oerrors++;
+	vte_init(ifp);
+
+	if (!IFQ_IS_EMPTY(&ifp->if_snd))
+		vte_start(ifp);
+}
+
+int
+vte_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
+{
+	struct vte_softc *sc = ifp->if_softc;
+	struct mii_data *mii = &sc->sc_miibus;
+	struct ifaddr *ifa = (struct ifaddr *)data;
+	struct ifreq *ifr = (struct ifreq *)data;
+	int s, error = 0;
+
+	s = splnet();
+
+	switch (cmd) {
+	case SIOCSIFADDR:
+		ifp->if_flags |= IFF_UP;
+		if (!(ifp->if_flags & IFF_RUNNING))
+			vte_init(ifp);
+#ifdef INET
+		if (ifa->ifa_addr->sa_family == AF_INET)
+			arp_ifinit(&sc->sc_arpcom, ifa);
+#endif
+		break;
+	case SIOCSIFFLAGS:
+		if (ifp->if_flags & IFF_UP) {
+			if (ifp->if_flags & IFF_RUNNING)
+				error = ENETRESET;
+			else
+				vte_init(ifp);
+		} else {
+			if (ifp->if_flags & IFF_RUNNING)
+				vte_stop(sc);
+		}
+		break;
+	case SIOCSIFMEDIA:
+	case SIOCGIFMEDIA:
+		error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd);
+		break;
+	default:
+		error = ether_ioctl(ifp, &sc->sc_arpcom, cmd, data);
+		break;
+	}
+
+	if (error == ENETRESET) {
+		if (ifp->if_flags & IFF_RUNNING)
+			vte_iff(sc);
+		error = 0;
+	}
+
+	splx(s);
+	return (error);
+}
+
+void
+vte_mac_config(struct vte_softc *sc)
+{
+	struct mii_data *mii;
+	uint16_t mcr;
+
+	mii = &sc->sc_miibus;
+	mcr = CSR_READ_2(sc, VTE_MCR0);
+	mcr &= ~(MCR0_FC_ENB | MCR0_FULL_DUPLEX);
+	if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0) {
+		mcr |= MCR0_FULL_DUPLEX;
+#ifdef notyet
+		if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_TXPAUSE) != 0)
+			mcr |= MCR0_FC_ENB;
+		/*
+		 * The data sheet is not clear whether the controller
+		 * honors received pause frames or not.  The is no
+		 * separate control bit for RX pause frame so just
+		 * enable MCR0_FC_ENB bit.
+		 */
+		if ((IFM_OPTIONS(mii->mii_media_active) & IFM_ETH_RXPAUSE) != 0)
+			mcr |= MCR0_FC_ENB;
+#endif
+	}
+	CSR_WRITE_2(sc, VTE_MCR0, mcr);
+}
+
+void
+vte_stats_clear(struct vte_softc *sc)
+{
+
+	/* Reading counter registers clears its contents. */
+	CSR_READ_2(sc, VTE_CNT_RX_DONE);
+	CSR_READ_2(sc, VTE_CNT_MECNT0);
+	CSR_READ_2(sc, VTE_CNT_MECNT1);
+	CSR_READ_2(sc, VTE_CNT_MECNT2);
+	CSR_READ_2(sc, VTE_CNT_MECNT3);
+	CSR_READ_2(sc, VTE_CNT_TX_DONE);
+	CSR_READ_2(sc, VTE_CNT_MECNT4);
+	CSR_READ_2(sc, VTE_CNT_PAUSE);
+}
+
+void
+vte_stats_update(struct vte_softc *sc)
+{
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	struct vte_hw_stats *stat;
+	uint16_t value;
+
+	stat = &sc->vte_stats;
+
+	CSR_READ_2(sc, VTE_MECISR);
+	/* RX stats. */
+	stat->rx_frames += CSR_READ_2(sc, VTE_CNT_RX_DONE);
+	value = CSR_READ_2(sc, VTE_CNT_MECNT0);
+	stat->rx_bcast_frames += (value >> 8);
+	stat->rx_mcast_frames += (value & 0xFF);
+	value = CSR_READ_2(sc, VTE_CNT_MECNT1);
+	stat->rx_runts += (value >> 8);
+	stat->rx_crcerrs += (value & 0xFF);
+	value = CSR_READ_2(sc, VTE_CNT_MECNT2);
+	stat->rx_long_frames += (value & 0xFF);
+	value = CSR_READ_2(sc, VTE_CNT_MECNT3);
+	stat->rx_fifo_full += (value >> 8);
+	stat->rx_desc_unavail += (value & 0xFF);
+
+	/* TX stats. */
+	stat->tx_frames += CSR_READ_2(sc, VTE_CNT_TX_DONE);
+	value = CSR_READ_2(sc, VTE_CNT_MECNT4);
+	stat->tx_underruns += (value >> 8);
+	stat->tx_late_colls += (value & 0xFF);
+
+	value = CSR_READ_2(sc, VTE_CNT_PAUSE);
+	stat->tx_pause_frames += (value >> 8);
+	stat->rx_pause_frames += (value & 0xFF);
+
+	/* Update ifp counters. */
+	ifp->if_opackets = stat->tx_frames;
+	ifp->if_collisions = stat->tx_late_colls;
+	ifp->if_oerrors = stat->tx_late_colls + stat->tx_underruns;
+	ifp->if_ipackets = stat->rx_frames;
+	ifp->if_ierrors = stat->rx_crcerrs + stat->rx_runts +
+	    stat->rx_long_frames + stat->rx_fifo_full;
+}
+
+int
+vte_intr(void *arg)
+{
+	struct vte_softc *sc = arg;
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	uint16_t status;
+	int n;
+	int claimed = 0;
+
+	/* Reading VTE_MISR acknowledges interrupts. */
+	status = CSR_READ_2(sc, VTE_MISR);
+	if ((status & VTE_INTRS) == 0)
+		return (0);
+
+	/* Disable interrupts. */
+	CSR_WRITE_2(sc, VTE_MIER, 0);
+	for (n = 8; (status & VTE_INTRS) != 0;) {
+		if ((ifp->if_flags & IFF_RUNNING) == 0)
+			break;
+		claimed = 1;
+		if (status & (MISR_RX_DONE | MISR_RX_DESC_UNAVAIL |
+		    MISR_RX_FIFO_FULL))
+			vte_rxeof(sc);
+		if (status & MISR_TX_DONE)
+			vte_txeof(sc);
+		if (status & MISR_EVENT_CNT_OFLOW)
+			vte_stats_update(sc);
+		if (!IFQ_IS_EMPTY(&ifp->if_snd))
+			vte_start(ifp);
+		if (--n > 0)
+			status = CSR_READ_2(sc, VTE_MISR);
+		else
+			break;
+	}
+
+	/* Re-enable interrupts. */
+	CSR_WRITE_2(sc, VTE_MIER, VTE_INTRS);
+
+	return (claimed);
+}
+
+void
+vte_txeof(struct vte_softc *sc)
+{
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	struct vte_txdesc *txd;
+	uint16_t status;
+	int cons, prog;
+
+	if (sc->vte_cdata.vte_tx_cnt == 0)
+		return;
+	bus_dmamap_sync(sc->sc_dmat, sc->vte_cdata.vte_tx_ring_map, 0,
+	    sc->vte_cdata.vte_tx_ring_map->dm_mapsize, BUS_DMASYNC_POSTREAD);
+	cons = sc->vte_cdata.vte_tx_cons;
+	/*
+	 * Go through our TX list and free mbufs for those
+	 * frames which have been transmitted.
+	 */
+	for (prog = 0; sc->vte_cdata.vte_tx_cnt > 0; prog++) {
+		txd = &sc->vte_cdata.vte_txdesc[cons];
+		status = letoh16(txd->tx_desc->dtst);
+		if (status & VTE_DTST_TX_OWN)
+			break;
+		sc->vte_cdata.vte_tx_cnt--;
+		/* Reclaim transmitted mbufs. */
+		bus_dmamap_unload(sc->sc_dmat, txd->tx_dmamap);
+		if ((txd->tx_flags & VTE_TXMBUF) == 0)
+			m_freem(txd->tx_m);
+		txd->tx_flags &= ~VTE_TXMBUF;
+		txd->tx_m = NULL;
+		prog++;
+		VTE_DESC_INC(cons, VTE_TX_RING_CNT);
+	}
+
+	if (prog > 0) {
+		ifp->if_flags &= ~IFF_OACTIVE;
+		sc->vte_cdata.vte_tx_cons = cons;
+		/*
+		 * Unarm watchdog timer only when there is no pending
+		 * frames in TX queue.
+		 */
+		if (sc->vte_cdata.vte_tx_cnt == 0)
+			ifp->if_timer = 0;
+	}
+}
+
+int
+vte_newbuf(struct vte_softc *sc, struct vte_rxdesc *rxd, int init)
+{
+	struct mbuf *m;
+	bus_dmamap_t map;
+	int error;
+
+	MGETHDR(m, init ? M_WAITOK : M_DONTWAIT, MT_DATA);
+	if (m == NULL)
+		return (ENOBUFS);
+	MCLGET(m, init ? M_WAITOK : M_DONTWAIT);
+	if (!(m->m_flags & M_EXT)) {
+		m_freem(m);
+		return (ENOBUFS);
+	}
+	m->m_len = m->m_pkthdr.len = MCLBYTES;
+	m_adj(m, sizeof(uint32_t));
+
+	error = bus_dmamap_load_mbuf(sc->sc_dmat,
+	    sc->vte_cdata.vte_rx_sparemap, m, BUS_DMA_NOWAIT);
+
+	if (error != 0) {
+		if (!error) {
+			bus_dmamap_unload(sc->sc_dmat,
+			    sc->vte_cdata.vte_rx_sparemap);
+			error = EFBIG;
+			printf("%s: too many segments?!\n", 
+			    sc->sc_dev.dv_xname);
+		}
+		m_freem(m);
+
+		if (init)
+			printf("%s: can't load RX mbuf\n", sc->sc_dev.dv_xname);
+		return (error);
+	}
+
+	if (rxd->rx_m != NULL) {
+		bus_dmamap_sync(sc->sc_dmat, rxd->rx_dmamap, 0,
+		    rxd->rx_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD);
+		bus_dmamap_unload(sc->sc_dmat, rxd->rx_dmamap);
+	}
+	map = rxd->rx_dmamap;
+	rxd->rx_dmamap = sc->vte_cdata.vte_rx_sparemap;
+	sc->vte_cdata.vte_rx_sparemap = map;
+
+	rxd->rx_m = m;
+	rxd->rx_desc->drbp = htole32(rxd->rx_dmamap->dm_segs[0].ds_addr);
+	rxd->rx_desc->drlen = 
+	    htole16(VTE_RX_LEN(rxd->rx_dmamap->dm_segs[0].ds_len));
+	rxd->rx_desc->drst = htole16(VTE_DRST_RX_OWN);
+
+	return (0);
+}
+
+void
+vte_rxeof(struct vte_softc *sc)
+{
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	struct vte_rxdesc *rxd;
+	struct mbuf *m;
+	uint16_t status, total_len;
+	int cons, prog;
+
+	bus_dmamap_sync(sc->sc_dmat, sc->vte_cdata.vte_rx_ring_map, 0,
+	    sc->vte_cdata.vte_rx_ring_map->dm_mapsize, BUS_DMASYNC_POSTREAD);
+	cons = sc->vte_cdata.vte_rx_cons;
+	for (prog = 0; (ifp->if_flags & IFF_RUNNING) != 0; prog++,
+	    VTE_DESC_INC(cons, VTE_RX_RING_CNT)) {
+		rxd = &sc->vte_cdata.vte_rxdesc[cons];
+		status = letoh16(rxd->rx_desc->drst);
+		if (status & VTE_DRST_RX_OWN)
+			break;
+		total_len = VTE_RX_LEN(letoh16(rxd->rx_desc->drlen));
+		m = rxd->rx_m;
+		if ((status & VTE_DRST_RX_OK) == 0) {
+			/* Discard errored frame. */
+			rxd->rx_desc->drlen =
+			    htole16(MCLBYTES - sizeof(uint32_t));
+			rxd->rx_desc->drst = htole16(VTE_DRST_RX_OWN);
+			continue;
+		}
+		if (vte_newbuf(sc, rxd, 0) != 0) {
+			ifp->if_iqdrops++;
+			rxd->rx_desc->drlen =
+			    htole16(MCLBYTES - sizeof(uint32_t));
+			rxd->rx_desc->drst = htole16(VTE_DRST_RX_OWN);
+			continue;
+		}
+
+		/*
+		 * It seems there is no way to strip FCS bytes.
+		 */
+		m->m_pkthdr.len = m->m_len = total_len - ETHER_CRC_LEN;
+		m->m_pkthdr.rcvif = ifp;
+
+#if NBPFILTER > 0
+		if (ifp->if_bpf)
+			bpf_mtap_ether(ifp->if_bpf, m, BPF_DIRECTION_IN);
+#endif
+
+		ether_input_mbuf(ifp, m);
+	}
+
+	if (prog > 0) {
+		/* Update the consumer index. */
+		sc->vte_cdata.vte_rx_cons = cons;
+		/*
+		 * Sync updated RX descriptors such that controller see
+		 * modified RX buffer addresses.
+		 */
+		bus_dmamap_sync(sc->sc_dmat, sc->vte_cdata.vte_rx_ring_map, 0,
+		    sc->vte_cdata.vte_rx_ring_map->dm_mapsize,
+		    BUS_DMASYNC_PREWRITE);
+#ifdef notyet
+		/*
+		 * Update residue counter.  Controller does not
+		 * keep track of number of available RX descriptors
+		 * such that driver should have to update VTE_MRDCR
+		 * to make controller know how many free RX
+		 * descriptors were added to controller.  This is
+		 * a similar mechanism used in VIA velocity
+		 * controllers and it indicates controller just
+		 * polls OWN bit of current RX descriptor pointer.
+		 * A couple of severe issues were seen on sample
+		 * board where the controller continuously emits TX
+		 * pause frames once RX pause threshold crossed.
+		 * Once triggered it never recovered form that
+		 * state, I couldn't find a way to make it back to
+		 * work at least.  This issue effectively
+		 * disconnected the system from network.  Also, the
+		 * controller used 00:00:00:00:00:00 as source
+		 * station address of TX pause frame. Probably this
+		 * is one of reason why vendor recommends not to
+		 * enable flow control on R6040 controller.
+		 */
+		CSR_WRITE_2(sc, VTE_MRDCR, prog |
+		    (((VTE_RX_RING_CNT * 2) / 10) <<
+		    VTE_MRDCR_RX_PAUSE_THRESH_SHIFT));
+#endif
+	}
+}
+
+void
+vte_tick(void *arg)
+{
+	struct vte_softc *sc = arg;
+	struct mii_data *mii = &sc->sc_miibus;
+	int s;
+
+	s = splnet();
+	mii_tick(mii);
+	vte_stats_update(sc);
+	timeout_add_sec(&sc->vte_tick_ch, 1);
+	splx(s);
+}
+
+void
+vte_reset(struct vte_softc *sc)
+{
+	uint16_t mcr;
+	int i;
+
+	mcr = CSR_READ_2(sc, VTE_MCR1);
+	CSR_WRITE_2(sc, VTE_MCR1, mcr | MCR1_MAC_RESET);
+	for (i = VTE_RESET_TIMEOUT; i > 0; i--) {
+		DELAY(10);
+		if ((CSR_READ_2(sc, VTE_MCR1) & MCR1_MAC_RESET) == 0)
+			break;
+	}
+	if (i == 0)
+		printf("%s: reset timeout(0x%04x)!\n", sc->sc_dev.dv_xname,
+		    mcr);
+	/*
+	 * Follow the guide of vendor recommended way to reset MAC.
+	 * Vendor confirms relying on MCR1_MAC_RESET of VTE_MCR1 is
+	 * not reliable so manually reset internal state machine.
+	 */
+	CSR_WRITE_2(sc, VTE_MACSM, 0x0002);
+	CSR_WRITE_2(sc, VTE_MACSM, 0);
+	DELAY(5000);
+}
+
+int
+vte_init(struct ifnet *ifp)
+{
+	struct vte_softc *sc = ifp->if_softc;
+	bus_addr_t paddr;
+	uint8_t *eaddr;
+	int error;
+
+	/*
+	 * Cancel any pending I/O.
+	 */
+	vte_stop(sc);
+	/*
+	 * Reset the chip to a known state.
+	 */
+	vte_reset(sc);
+
+	/* Initialize RX descriptors. */
+	error = vte_init_rx_ring(sc);
+	if (error != 0) {
+		printf("%s: no memory for Rx buffers.\n", sc->sc_dev.dv_xname);
+		vte_stop(sc);
+		return (error);
+	}
+	error = vte_init_tx_ring(sc);
+	if (error != 0) {
+		printf("%s: no memory for Tx buffers.\n", sc->sc_dev.dv_xname);
+		vte_stop(sc);
+		return (error);
+	}
+
+	/*
+	 * Reprogram the station address.  Controller supports up
+	 * to 4 different station addresses so driver programs the
+	 * first station address as its own ethernet address and
+	 * configure the remaining three addresses as perfect
+	 * multicast addresses.
+	 */
+	eaddr = LLADDR(ifp->if_sadl);
+	CSR_WRITE_2(sc, VTE_MID0L, eaddr[1] << 8 | eaddr[0]);
+	CSR_WRITE_2(sc, VTE_MID0M, eaddr[3] << 8 | eaddr[2]);
+	CSR_WRITE_2(sc, VTE_MID0H, eaddr[5] << 8 | eaddr[4]);
+
+	/* Set TX descriptor base addresses. */
+	paddr = sc->vte_cdata.vte_tx_ring_paddr;
+	CSR_WRITE_2(sc, VTE_MTDSA1, paddr >> 16);
+	CSR_WRITE_2(sc, VTE_MTDSA0, paddr & 0xFFFF);
+	/* Set RX descriptor base addresses. */
+	paddr = sc->vte_cdata.vte_rx_ring_paddr;
+	CSR_WRITE_2(sc, VTE_MRDSA1, paddr >> 16);
+	CSR_WRITE_2(sc, VTE_MRDSA0, paddr & 0xFFFF);
+	/*
+	 * Initialize RX descriptor residue counter and set RX
+	 * pause threshold to 20% of available RX descriptors.
+	 * See comments on vte_rxeof() for details on flow control
+	 * issues.
+	 */
+	CSR_WRITE_2(sc, VTE_MRDCR, (VTE_RX_RING_CNT & VTE_MRDCR_RESIDUE_MASK) |
+	    (((VTE_RX_RING_CNT * 2) / 10) << VTE_MRDCR_RX_PAUSE_THRESH_SHIFT));
+
+	/*
+	 * Always use maximum frame size that controller can
+	 * support.  Otherwise received frames that has longer
+	 * frame length than vte(4) MTU would be silently dropped
+	 * in controller.  This would break path-MTU discovery as
+	 * sender wouldn't get any responses from receiver. The
+	 * RX buffer size should be multiple of 4.
+	 * Note, jumbo frames are silently ignored by controller
+	 * and even MAC counters do not detect them.
+	 */
+	CSR_WRITE_2(sc, VTE_MRBSR, VTE_RX_BUF_SIZE_MAX);
+
+	/* Configure FIFO. */
+	CSR_WRITE_2(sc, VTE_MBCR, MBCR_FIFO_XFER_LENGTH_16 |
+	    MBCR_TX_FIFO_THRESH_64 | MBCR_RX_FIFO_THRESH_16 |
+	    MBCR_SDRAM_BUS_REQ_TIMER_DEFAULT);
+
+	/*
+	 * Configure TX/RX MACs.  Actual resolved duplex and flow
+	 * control configuration is done after detecting a valid
+	 * link.  Note, we don't generate early interrupt here
+	 * as well since FreeBSD does not have interrupt latency
+	 * problems like Windows.
+	 */
+	CSR_WRITE_2(sc, VTE_MCR0, MCR0_ACCPT_LONG_PKT);
+	/*
+	 * We manually keep track of PHY status changes to
+	 * configure resolved duplex and flow control since only
+	 * duplex configuration can be automatically reflected to
+	 * MCR0.
+	 */
+	CSR_WRITE_2(sc, VTE_MCR1, MCR1_PKT_LENGTH_1537 |
+	    MCR1_EXCESS_COL_RETRY_16);
+
+	/* Initialize RX filter. */
+	vte_iff(sc);
+
+	/* Disable TX/RX interrupt moderation control. */
+	CSR_WRITE_2(sc, VTE_MRICR, 0);
+	CSR_WRITE_2(sc, VTE_MTICR, 0);
+
+	/* Enable MAC event counter interrupts. */
+	CSR_WRITE_2(sc, VTE_MECIER, VTE_MECIER_INTRS);
+	/* Clear MAC statistics. */
+	vte_stats_clear(sc);
+
+	/* Acknowledge all pending interrupts and clear it. */
+	CSR_WRITE_2(sc, VTE_MIER, VTE_INTRS);
+	CSR_WRITE_2(sc, VTE_MISR, 0);
+
+	sc->vte_flags &= ~VTE_FLAG_LINK;
+	/* Switch to the current media. */
+	vte_mediachange(ifp);
+
+	timeout_add_sec(&sc->vte_tick_ch, 1);
+
+	ifp->if_flags |= IFF_RUNNING;
+	ifp->if_flags &= ~IFF_OACTIVE;
+
+	return (0);
+}
+
+void
+vte_stop(struct vte_softc *sc)
+{
+	struct ifnet *ifp = &sc->sc_arpcom.ac_if;
+	struct vte_txdesc *txd;
+	struct vte_rxdesc *rxd;
+	int i;
+
+	/*
+	 * Mark the interface down and cancel the watchdog timer.
+	 */
+	ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
+	ifp->if_timer = 0;
+	sc->vte_flags &= ~VTE_FLAG_LINK;
+	timeout_del(&sc->vte_tick_ch);
+	vte_stats_update(sc);
+	/* Disable interrupts. */
+	CSR_WRITE_2(sc, VTE_MIER, 0);
+	CSR_WRITE_2(sc, VTE_MECIER, 0);
+	/* Stop RX/TX MACs. */
+	vte_stop_mac(sc);
+	/* Clear interrupts. */
+	CSR_READ_2(sc, VTE_MISR);
+	/*
+	 * Free TX/RX mbufs still in the queues.
+	 */
+	for (i = 0; i < VTE_RX_RING_CNT; i++) {
+		rxd = &sc->vte_cdata.vte_rxdesc[i];
+		if (rxd->rx_m != NULL) {
+			bus_dmamap_unload(sc->sc_dmat, rxd->rx_dmamap);
+			m_freem(rxd->rx_m);
+			rxd->rx_m = NULL;
+		}
+	}
+	for (i = 0; i < VTE_TX_RING_CNT; i++) {
+		txd = &sc->vte_cdata.vte_txdesc[i];
+		if (txd->tx_m != NULL) {
+			bus_dmamap_unload(sc->sc_dmat, txd->tx_dmamap);
+			if ((txd->tx_flags & VTE_TXMBUF) == 0)
+				m_freem(txd->tx_m);
+			txd->tx_m = NULL;
+			txd->tx_flags &= ~VTE_TXMBUF;
+		}
+	}
+	/* Free TX mbuf pools used for deep copy. */
+	for (i = 0; i < VTE_TX_RING_CNT; i++) {
+		if (sc->vte_cdata.vte_txmbufs[i] != NULL) {
+			m_freem(sc->vte_cdata.vte_txmbufs[i]);
+			sc->vte_cdata.vte_txmbufs[i] = NULL;
+		}
+	}
+}
+
+void
+vte_start_mac(struct vte_softc *sc)
+{
+	uint16_t mcr;
+	int i;
+
+	/* Enable RX/TX MACs. */
+	mcr = CSR_READ_2(sc, VTE_MCR0);
+	if ((mcr & (MCR0_RX_ENB | MCR0_TX_ENB)) !=
+	    (MCR0_RX_ENB | MCR0_TX_ENB)) {
+		mcr |= MCR0_RX_ENB | MCR0_TX_ENB;
+		CSR_WRITE_2(sc, VTE_MCR0, mcr);
+		for (i = VTE_TIMEOUT; i > 0; i--) {
+			mcr = CSR_READ_2(sc, VTE_MCR0);
+			if ((mcr & (MCR0_RX_ENB | MCR0_TX_ENB)) ==
+			    (MCR0_RX_ENB | MCR0_TX_ENB))
+				break;
+			DELAY(10);
+		}
+		if (i == 0)
+			printf("%s: could not enable RX/TX MAC(0x%04x)!\n",
+			    sc->sc_dev.dv_xname, mcr);
+	}
+}
+
+void
+vte_stop_mac(struct vte_softc *sc)
+{
+	uint16_t mcr;
+	int i;
+
+	/* Disable RX/TX MACs. */
+	mcr = CSR_READ_2(sc, VTE_MCR0);
+	if ((mcr & (MCR0_RX_ENB | MCR0_TX_ENB)) != 0) {
+		mcr &= ~(MCR0_RX_ENB | MCR0_TX_ENB);
+		CSR_WRITE_2(sc, VTE_MCR0, mcr);
+		for (i = VTE_TIMEOUT; i > 0; i--) {
+			mcr = CSR_READ_2(sc, VTE_MCR0);
+			if ((mcr & (MCR0_RX_ENB | MCR0_TX_ENB)) == 0)
+				break;
+			DELAY(10);
+		}
+		if (i == 0)
+			printf("%s: could not disable RX/TX MAC(0x%04x)!\n",
+			    sc->sc_dev.dv_xname, mcr);
+	}
+}
+
+int
+vte_init_tx_ring(struct vte_softc *sc)
+{
+	struct vte_tx_desc *desc;
+	struct vte_txdesc *txd;
+	bus_addr_t addr;
+	int i;
+
+	sc->vte_cdata.vte_tx_prod = 0;
+	sc->vte_cdata.vte_tx_cons = 0;
+	sc->vte_cdata.vte_tx_cnt = 0;
+
+	/* Pre-allocate TX mbufs for deep copy. */
+	for (i = 0; i < VTE_TX_RING_CNT; i++) {
+		MGETHDR(sc->vte_cdata.vte_txmbufs[i], 
+		    M_DONTWAIT, MT_DATA);
+		if (sc->vte_cdata.vte_txmbufs[i] == NULL)
+			return (ENOBUFS);
+		MCLGET(sc->vte_cdata.vte_txmbufs[i], M_DONTWAIT);
+		if (!(sc->vte_cdata.vte_txmbufs[i]->m_flags & M_EXT)) {
+			m_freem(sc->vte_cdata.vte_txmbufs[i]);
+			return (ENOBUFS);
+		}
+		sc->vte_cdata.vte_txmbufs[i]->m_pkthdr.len = MCLBYTES;
+		sc->vte_cdata.vte_txmbufs[i]->m_len = MCLBYTES;
+	}
+	desc = sc->vte_cdata.vte_tx_ring;
+	bzero(desc, VTE_TX_RING_SZ);
+	for (i = 0; i < VTE_TX_RING_CNT; i++) {
+		txd = &sc->vte_cdata.vte_txdesc[i];
+		txd->tx_m = NULL;
+		if (i != VTE_TX_RING_CNT - 1)
+			addr = sc->vte_cdata.vte_tx_ring_paddr +
+			    sizeof(struct vte_tx_desc) * (i + 1);
+		else
+			addr = sc->vte_cdata.vte_tx_ring_paddr +
+			    sizeof(struct vte_tx_desc) * 0;
+		desc = &sc->vte_cdata.vte_tx_ring[i];
+		desc->dtnp = htole32(addr);
+		txd->tx_desc = desc;
+	}
+
+	bus_dmamap_sync(sc->sc_dmat, sc->vte_cdata.vte_tx_ring_map, 0,
+	    sc->vte_cdata.vte_tx_ring_map->dm_mapsize, BUS_DMASYNC_PREWRITE);
+	return (0);
+}
+
+int
+vte_init_rx_ring(struct vte_softc *sc)
+{
+	struct vte_rx_desc *desc;
+	struct vte_rxdesc *rxd;
+	bus_addr_t addr;
+	int i;
+
+	sc->vte_cdata.vte_rx_cons = 0;
+	desc = sc->vte_cdata.vte_rx_ring;
+	bzero(desc, VTE_RX_RING_SZ);
+	for (i = 0; i < VTE_RX_RING_CNT; i++) {
+		rxd = &sc->vte_cdata.vte_rxdesc[i];
+		rxd->rx_m = NULL;
+		if (i != VTE_RX_RING_CNT - 1)
+			addr = sc->vte_cdata.vte_rx_ring_paddr +
+			    sizeof(struct vte_rx_desc) * (i + 1);
+		else
+			addr = sc->vte_cdata.vte_rx_ring_paddr +
+			    sizeof(struct vte_rx_desc) * 0;
+		desc = &sc->vte_cdata.vte_rx_ring[i];
+		desc->drnp = htole32(addr);
+		rxd->rx_desc = desc;
+		if (vte_newbuf(sc, rxd, 1) != 0)
+			return (ENOBUFS);
+	}
+
+	bus_dmamap_sync(sc->sc_dmat, sc->vte_cdata.vte_rx_ring_map, 0,
+	    sc->vte_cdata.vte_rx_ring_map->dm_mapsize, BUS_DMASYNC_PREWRITE);
+
+	return (0);
+}
+
+void
+vte_iff(struct vte_softc *sc)
+{
+	struct arpcom *ac = &sc->sc_arpcom;
+	struct ifnet *ifp = &ac->ac_if;
+	struct ether_multi *enm;
+	struct ether_multistep step;
+	uint8_t *eaddr;
+	uint32_t crc;
+	uint16_t rxfilt_perf[VTE_RXFILT_PERFECT_CNT][3];
+	uint16_t mchash[4], mcr;
+	int i, nperf;
+
+	bzero(mchash, sizeof(mchash));
+	for (i = 0; i < VTE_RXFILT_PERFECT_CNT; i++) {
+		rxfilt_perf[i][0] = 0xFFFF;
+		rxfilt_perf[i][1] = 0xFFFF;
+		rxfilt_perf[i][2] = 0xFFFF;
+	}
+
+	mcr = CSR_READ_2(sc, VTE_MCR0);
+	mcr &= ~(MCR0_PROMISC | MCR0_BROADCAST | MCR0_MULTICAST);
+	ifp->if_flags &= ~IFF_ALLMULTI;
+
+	/* Always accept broadcast frames. */
+	mcr |= MCR0_BROADCAST;
+
+	if (ifp->if_flags & IFF_PROMISC || ac->ac_multirangecnt > 0) {
+		ifp->if_flags |= IFF_ALLMULTI;
+		if (ifp->if_flags & IFF_PROMISC)
+			mcr |= MCR0_PROMISC;
+		else
+			mcr |= MCR0_MULTICAST;
+		mchash[0] = mchash[1] = mchash[2] = mchash[3] = 0xFFFF;
+	} else {
+		nperf = 0;
+		ETHER_FIRST_MULTI(step, ac, enm);
+		while (enm != NULL) {
+			/*
+			 * Program the first 3 multicast groups into
+			 * the perfect filter.  For all others, use the
+			 * hash table.
+			 */
+			if (nperf < VTE_RXFILT_PERFECT_CNT) {
+				eaddr = enm->enm_addrlo;
+				rxfilt_perf[nperf][0] = 
+				    eaddr[1] << 8 | eaddr[0];
+				rxfilt_perf[nperf][1] = 
+				    eaddr[3] << 8 | eaddr[2];
+				rxfilt_perf[nperf][2] = 
+				    eaddr[5] << 8 | eaddr[4];
+				nperf++;
+				continue;
+			}
+			crc = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN);
+			mchash[crc >> 30] |= 1 << ((crc >> 26) & 0x0F);
+			ETHER_NEXT_MULTI(step, enm);
+		}
+	}
+	if (mchash[0] != 0 || mchash[1] != 0 || mchash[2] != 0 ||
+	    mchash[3] != 0)
+		mcr |= MCR0_MULTICAST;
+
+	/* Program multicast hash table. */
+	CSR_WRITE_2(sc, VTE_MAR0, mchash[0]);
+	CSR_WRITE_2(sc, VTE_MAR1, mchash[1]);
+	CSR_WRITE_2(sc, VTE_MAR2, mchash[2]);
+	CSR_WRITE_2(sc, VTE_MAR3, mchash[3]);
+	/* Program perfect filter table. */
+	for (i = 0; i < VTE_RXFILT_PERFECT_CNT; i++) {
+		CSR_WRITE_2(sc, VTE_RXFILTER_PEEFECT_BASE + 8 * i + 0,
+		    rxfilt_perf[i][0]);
+		CSR_WRITE_2(sc, VTE_RXFILTER_PEEFECT_BASE + 8 * i + 2,
+		    rxfilt_perf[i][1]);
+		CSR_WRITE_2(sc, VTE_RXFILTER_PEEFECT_BASE + 8 * i + 4,
+		    rxfilt_perf[i][2]);
+	}
+	CSR_WRITE_2(sc, VTE_MCR0, mcr);
+	CSR_READ_2(sc, VTE_MCR0);
+}
diff --git a/sys/dev/pci/if_vtereg.h b/sys/dev/pci/if_vtereg.h
new file mode 100644
index 00000000000..13e8da83586
--- /dev/null
+++ b/sys/dev/pci/if_vtereg.h
@@ -0,0 +1,460 @@
+/*	$OpenBSD: if_vtereg.h,v 1.1 2011/01/15 04:35:34 kevlo Exp $	*/
+/*-
+ * Copyright (c) 2010, Pyun YongHyeon <yongari@FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice unmodified, this list of conditions, and the following
+ *    disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD: head/sys/dev/vte/if_vtereg.h 216829 2010-12-31 00:21:41Z yongari $
+ */
+
+#ifndef	_IF_VTEREG_H
+#define	_IF_VTEREG_H
+
+/* PCI low memory base and low I/O base register */
+#define	VTE_PCI_LOIO			0x10
+#define	VTE_PCI_LOMEM			0x14
+
+/* MAC control register 0 */
+#define	VTE_MCR0			0x00
+#define	MCR0_ACCPT_ERR			0x0001
+#define	MCR0_RX_ENB			0x0002
+#define	MCR0_ACCPT_RUNT			0x0004
+#define	MCR0_ACCPT_LONG_PKT		0x0008
+#define	MCR0_ACCPT_DRIBBLE		0x0010
+#define	MCR0_PROMISC			0x0020
+#define	MCR0_BROADCAST			0x0040
+#define	MCR0_RX_EARLY_INTR		0x0080
+#define	MCR0_MULTICAST			0x0100
+#define	MCR0_FC_ENB			0x0200
+#define	MCR0_TX_ENB			0x1000
+#define	MCR0_TX_EARLY_INTR		0x4000
+#define	MCR0_FULL_DUPLEX		0x8000
+
+/* MAC control register 1 */
+#define	VTE_MCR1			0x04
+#define	MCR1_MAC_RESET			0x0001
+#define	MCR1_MAC_LOOPBACK		0x0002
+#define	MCR1_EXCESS_COL_RETRANS_DIS	0x0004
+#define	MCR1_AUTO_CHG_DUPLEX		0x0008
+#define	MCR1_PKT_LENGTH_1518		0x0010
+#define	MCR1_PKT_LENGTH_1522		0x0020
+#define	MCR1_PKT_LENGTH_1534		0x0030
+#define	MCR1_PKT_LENGTH_1537		0x0000
+#define	MCR1_EARLY_INTR_THRESH_1129	0x0000
+#define	MCR1_EARLY_INTR_THRESH_1257	0x0040
+#define	MCR1_EARLY_INTR_THRESH_1385	0x0080
+#define	MCR1_EARLY_INTR_THRESH_1513	0x00C0
+#define	MCR1_EXCESS_COL_RETRY_16	0x0000
+#define	MCR1_EXCESS_COL_RETRY_32	0x0100
+#define	MCR1_FC_ACTIVE			0x0200
+#define	MCR1_RX_DESC_HASH_IDX		0x4000
+#define	MCR1_RX_UNICAST_HASH		0x8000
+
+#define	MCR1_PKT_LENGTH_MASK		0x0030
+#define	MCR1_EARLY_INTR_THRESH_MASK	0x00C0
+
+/* MAC bus control register */
+#define	VTE_MBCR			0x08
+#define	MBCR_FIFO_XFER_LENGTH_4		0x0000
+#define	MBCR_FIFO_XFER_LENGTH_8		0x0001
+#define	MBCR_FIFO_XFER_LENGTH_16	0x0002
+#define	MBCR_FIFO_XFER_LENGTH_32	0x0003
+#define	MBCR_TX_FIFO_THRESH_16		0x0000
+#define	MBCR_TX_FIFO_THRESH_32		0x0004
+#define	MBCR_TX_FIFO_THRESH_64		0x0008
+#define	MBCR_TX_FIFO_THRESH_96		0x000C
+#define	MBCR_RX_FIFO_THRESH_8		0x0000
+#define	MBCR_RX_FIFO_THRESH_16		0x0010
+#define	MBCR_RX_FIFO_THRESH_32		0x0020
+#define	MBCR_RX_FIFO_THRESH_64		0x0030
+#define	MBCR_SDRAM_BUS_REQ_TIMER_MASK	0x1F00
+#define	MBCR_SDRAM_BUS_REQ_TIMER_SHIFT	8
+#define	MBCR_SDRAM_BUS_REQ_TIMER_DEFAULT	0x1F00
+
+/* MAC TX interrupt control register */
+#define	VTE_MTICR			0x0C
+#define	MTICR_TX_TIMER_MASK		0x001F
+#define	MTICR_TX_BUNDLE_MASK		0x0F00
+#define	VTE_IM_TX_TIMER_DEFAULT		0x7F
+#define	VTE_IM_TX_BUNDLE_DEFAULT	15
+
+#define	VTE_IM_TIMER_MIN		0
+#define	VTE_IM_TIMER_MAX		82
+#define	VTE_IM_TIMER_MASK		0x001F
+#define	VTE_IM_TIMER_SHIFT		0
+#define	VTE_IM_BUNDLE_MIN		1
+#define	VTE_IM_BUNDLE_MAX		15
+#define	VTE_IM_BUNDLE_SHIFT		8
+
+/* MAC RX interrupt control register */
+#define	VTE_MRICR			0x10
+#define	MRICR_RX_TIMER_MASK		0x001F
+#define	MRICR_RX_BUNDLE_MASK		0x0F00
+#define	VTE_IM_RX_TIMER_DEFAULT		0x7F
+#define	VTE_IM_RX_BUNDLE_DEFAULT	15
+
+/* MAC TX poll command register */
+#define	VTE_TX_POLL			0x14
+#define	TX_POLL_START			0x0001
+
+/* MAC RX buffer size register */
+#define	VTE_MRBSR			0x18
+#define	VTE_MRBSR_SIZE_MASK		0x03FF
+
+/* MAC RX descriptor control register */
+#define	VTE_MRDCR			0x1A
+#define	VTE_MRDCR_RESIDUE_MASK		0x00FF
+#define	VTE_MRDCR_RX_PAUSE_THRESH_MASK	0xFF00
+#define	VTE_MRDCR_RX_PAUSE_THRESH_SHIFT	8
+
+/* MAC Last status register */
+#define	VTE_MLSR			0x1C
+#define	MLSR_MULTICAST			0x0001
+#define	MLSR_BROADCAST			0x0002
+#define	MLSR_CRC_ERR			0x0004
+#define	MLSR_RUNT			0x0008
+#define	MLSR_LONG_PKT			0x0010
+#define	MLSR_TRUNC			0x0020
+#define	MLSR_DRIBBLE			0x0040
+#define	MLSR_PHY_ERR			0x0080
+#define	MLSR_TX_FIFO_UNDERRUN		0x0200
+#define	MLSR_RX_DESC_UNAVAIL		0x0400
+#define	MLSR_TX_EXCESS_COL		0x2000
+#define	MLSR_TX_LATE_COL		0x4000
+#define	MLSR_RX_FIFO_OVERRUN		0x8000
+
+/* MAC MDIO control register */
+#define	VTE_MMDIO			0x20
+#define	MMDIO_REG_ADDR_MASK		0x001F
+#define	MMDIO_PHY_ADDR_MASK		0x1F00
+#define	MMDIO_READ			0x2000
+#define	MMDIO_WRITE			0x4000
+#define	MMDIO_REG_ADDR_SHIFT		0
+#define	MMDIO_PHY_ADDR_SHIFT		8
+
+/* MAC MDIO read data register */
+#define	VTE_MMRD			0x24
+#define	MMRD_DATA_MASK			0xFFFF
+
+/* MAC MDIO write data register */
+#define	VTE_MMWD			0x28
+#define	MMWD_DATA_MASK			0xFFFF
+
+/* MAC TX descriptor start address 0 */
+#define	VTE_MTDSA0			0x2C
+
+/* MAC TX descriptor start address 1 */
+#define	VTE_MTDSA1			0x30
+
+/* MAC RX descriptor start address 0 */
+#define	VTE_MRDSA0			0x34
+
+/* MAC RX descriptor start address 1 */
+#define	VTE_MRDSA1			0x38
+
+/* MAC Interrupt status register */
+#define	VTE_MISR			0x3C
+#define	MISR_RX_DONE			0x0001
+#define	MISR_RX_DESC_UNAVAIL		0x0002
+#define	MISR_RX_FIFO_FULL		0x0004
+#define	MISR_RX_EARLY_INTR		0x0008
+#define	MISR_TX_DONE			0x0010
+#define	MISR_TX_EARLY_INTR		0x0080
+#define	MISR_EVENT_CNT_OFLOW		0x0100
+#define	MISR_PHY_MEDIA_CHG		0x0200
+
+/* MAC Interrupt enable register */
+#define	VTE_MIER			0x40
+
+#define	VTE_INTRS							\
+	(MISR_RX_DONE | MISR_RX_DESC_UNAVAIL | MISR_RX_FIFO_FULL |	\
+	MISR_TX_DONE | MISR_EVENT_CNT_OFLOW)
+
+/* MAC Event counter interrupt status register */
+#define	VTE_MECISR			0x44
+#define	MECISR_EC_RX_DONE		0x0001
+#define	MECISR_EC_MULTICAST		0x0002
+#define	MECISR_EC_BROADCAST		0x0004
+#define	MECISR_EC_CRC_ERR		0x0008
+#define	MECISR_EC_RUNT			0x0010
+#define	MESCIR_EC_LONG_PKT		0x0020
+#define	MESCIR_EC_RX_DESC_UNAVAIL	0x0080
+#define	MESCIR_EC_RX_FIFO_FULL		0x0100
+#define	MESCIR_EC_TX_DONE		0x0200
+#define	MESCIR_EC_LATE_COL		0x0400
+#define	MESCIR_EC_TX_UNDERRUN		0x0800
+
+/* MAC Event counter interrupt enable register */
+#define	VTE_MECIER			0x48
+#define	VTE_MECIER_INTRS						 \
+	(MECISR_EC_RX_DONE | MECISR_EC_MULTICAST | MECISR_EC_BROADCAST | \
+	MECISR_EC_CRC_ERR | MECISR_EC_RUNT | MESCIR_EC_LONG_PKT |	 \
+	MESCIR_EC_RX_DESC_UNAVAIL | MESCIR_EC_RX_FIFO_FULL |		 \
+	MESCIR_EC_TX_DONE | MESCIR_EC_LATE_COL | MESCIR_EC_TX_UNDERRUN)
+
+#define	VTE_CNT_RX_DONE			0x50
+
+#define	VTE_CNT_MECNT0			0x52
+
+#define	VTE_CNT_MECNT1			0x54
+
+#define	VTE_CNT_MECNT2			0x56
+
+#define	VTE_CNT_MECNT3			0x58
+
+#define	VTE_CNT_TX_DONE			0x5A
+
+#define	VTE_CNT_MECNT4			0x5C
+
+#define	VTE_CNT_PAUSE			0x5E
+
+/* MAC Hash table register */
+#define	VTE_MAR0			0x60
+#define	VTE_MAR1			0x62
+#define	VTE_MAR2			0x64
+#define	VTE_MAR3			0x66
+
+/* MAC station address and multicast address register */
+#define	VTE_MID0L			0x68
+#define	VTE_MID0M			0x6A
+#define	VTE_MID0H			0x6C
+#define	VTE_MID1L			0x70
+#define	VTE_MID1M			0x72
+#define	VTE_MID1H			0x74
+#define	VTE_MID2L			0x78
+#define	VTE_MID2M			0x7A
+#define	VTE_MID2H			0x7C
+#define	VTE_MID3L			0x80
+#define	VTE_MID3M			0x82
+#define	VTE_MID3H			0x84
+
+#define	VTE_RXFILTER_PEEFECT_BASE	VTE_MID1L
+#define	VTE_RXFILT_PERFECT_CNT		3
+
+/* MAC PHY status change configuration register */
+#define	VTE_MPSCCR			0x88
+#define	MPSCCR_TIMER_DIVIDER_MASK	0x0007
+#define	MPSCCR_PHY_ADDR_MASK		0x1F00
+#define	MPSCCR_PHY_STS_CHG_ENB		0x8000
+#define	MPSCCR_PHY_ADDR_SHIFT		8
+
+/* MAC PHY status register2 */
+#define	VTE_MPSR			0x8A
+#define	MPSR_LINK_UP			0x0001
+#define	MPSR_SPEED_100			0x0002
+#define	MPSR_FULL_DUPLEX		0x0004
+
+/* MAC Status machine(undocumented). */
+#define	VTE_MACSM			0xAC
+
+/* MDC Speed control register */
+#define	VTE_MDCSC			0xB6
+#define	MDCSC_DEFAULT			0x0030
+
+/* MAC Identifier and revision register */
+#define	VTE_MACID_REV			0xBC
+#define	VTE_MACID_REV_MASK		0x00FF
+#define	VTE_MACID_MASK			0xFF00
+#define	VTE_MACID_REV_SHIFT		0
+#define	VTE_MACID_SHIFT			8
+
+/* MAC Identifier register */
+#define	VTE_MACID			0xBE
+
+/*
+ * RX descriptor
+ * - Added one more uint16_t member to align it 4 on bytes boundary.
+ *   This does not affect operation of controller since it includes
+ *   next pointer address.
+ */
+struct vte_rx_desc {
+	uint16_t drst;
+	uint16_t drlen;
+	uint32_t drbp;
+	uint32_t drnp;
+	uint16_t hidx;
+	uint16_t rsvd2;
+	uint16_t rsvd3;
+	uint16_t __pad;	/* Not actual descriptor member. */
+};
+
+#define	VTE_DRST_MID_MASK	0x0003
+#define	VTE_DRST_MID_HIT	0x0004
+#define	VTE_DRST_MULTICAST_HIT	0x0008
+#define	VTE_DRST_MULTICAST	0x0010
+#define	VTE_DRST_BROADCAST	0x0020
+#define	VTE_DRST_CRC_ERR	0x0040
+#define	VTE_DRST_RUNT		0x0080
+#define	VTE_DRST_LONG		0x0100
+#define	VTE_DRST_TRUNC		0x0200
+#define	VTE_DRST_DRIBBLE	0x0400
+#define	VTE_DRST_PHY_ERR	0x0800
+#define	VTE_DRST_RX_OK		0x4000
+#define	VTE_DRST_RX_OWN		0x8000
+
+#define	VTE_RX_LEN(x)		((x) & 0x7FF)
+
+#define	VTE_RX_HIDX(x)		((x) & 0x3F)
+
+/*
+ * TX descriptor
+ * - Added one more uint32_t member to align it on 16 bytes boundary.
+ */
+struct vte_tx_desc {
+	uint16_t dtst;
+	uint16_t dtlen;
+	uint32_t dtbp;
+	uint32_t dtnp;
+	uint32_t __pad;	/* Not actual descriptor member. */
+};
+
+#define	VTE_DTST_EXCESS_COL	0x0010
+#define	VTE_DTST_LATE_COL	0x0020
+#define	VTE_DTST_UNDERRUN	0x0040
+#define	VTE_DTST_NO_CRC		0x2000
+#define	VTE_DTST_TX_OK		0x4000
+#define	VTE_DTST_TX_OWN		0x8000
+
+#define	VTE_TX_LEN(x)		((x) & 0x7FF)
+
+#define	VTE_TX_RING_CNT		64
+#define	VTE_TX_RING_ALIGN	16
+/*
+ * The TX/RX descriptor format has no limitation for number of
+ * descriptors in TX/RX ring.  However, the maximum number of
+ * descriptors that could be set as RX descriptor ring residue
+ * counter is 255.  This effectively limits number of RX
+ * descriptors available to be less than or equal to 255.
+ */
+#define	VTE_RX_RING_CNT		128
+#define	VTE_RX_RING_ALIGN	16
+#define	VTE_RX_BUF_ALIGN	4
+
+#define	VTE_DESC_INC(x, y)	((x) = ((x) + 1) % (y))
+
+#define	VTE_TX_RING_SZ		\
+	(sizeof(struct vte_tx_desc) * VTE_TX_RING_CNT)
+#define	VTE_RX_RING_SZ		\
+	(sizeof(struct vte_rx_desc) * VTE_RX_RING_CNT)
+
+#define	VTE_RX_BUF_SIZE_MAX	(MCLBYTES - sizeof(uint32_t))
+
+#define	VTE_MIN_FRAMELEN	(ETHER_MIN_LEN - ETHER_CRC_LEN)
+
+struct vte_rxdesc {
+	struct mbuf		*rx_m;
+	bus_dmamap_t		rx_dmamap;
+	struct vte_rx_desc	*rx_desc;
+};
+
+struct vte_txdesc {
+	struct mbuf		*tx_m;
+	bus_dmamap_t		tx_dmamap;
+	struct vte_tx_desc	*tx_desc;
+	int			tx_flags;
+#define	VTE_TXMBUF		0x0001
+};
+
+struct vte_chain_data {
+	struct vte_txdesc	vte_txdesc[VTE_TX_RING_CNT];
+	struct mbuf		*vte_txmbufs[VTE_TX_RING_CNT];
+	struct vte_rxdesc	vte_rxdesc[VTE_RX_RING_CNT];
+	bus_dmamap_t		vte_tx_ring_map;
+	bus_dma_segment_t	vte_tx_ring_seg;
+	bus_dmamap_t		vte_rx_ring_map;
+	bus_dma_segment_t	vte_rx_ring_seg;
+	bus_dmamap_t		vte_rr_ring_map;
+	bus_dma_segment_t	vte_rr_ring_seg;
+	bus_dmamap_t		vte_rx_sparemap;
+	bus_dmamap_t		vte_cmb_map;
+	bus_dma_segment_t	vte_cmb_seg;
+	bus_dmamap_t		vte_smb_map;
+	bus_dma_segment_t	vte_smb_seg;
+	struct vte_tx_desc	*vte_tx_ring;
+	bus_addr_t		vte_tx_ring_paddr;
+	struct vte_rx_desc	*vte_rx_ring;
+	bus_addr_t		vte_rx_ring_paddr;
+
+	int			vte_tx_prod;
+	int			vte_tx_cons;
+	int			vte_tx_cnt;
+	int			vte_rx_cons;
+};
+
+struct vte_hw_stats {
+	/* RX stats. */
+	uint32_t rx_frames;
+	uint32_t rx_bcast_frames;
+	uint32_t rx_mcast_frames;
+	uint32_t rx_runts;
+	uint32_t rx_crcerrs;
+	uint32_t rx_long_frames;
+	uint32_t rx_fifo_full;
+	uint32_t rx_desc_unavail;
+	uint32_t rx_pause_frames;
+
+	/* TX stats. */
+	uint32_t tx_frames;
+	uint32_t tx_underruns;
+	uint32_t tx_late_colls;
+	uint32_t tx_pause_frames;
+};
+
+/*
+ * Software state per device.
+ */
+struct vte_softc {
+	struct device		sc_dev;
+	struct arpcom		sc_arpcom;
+	bus_space_tag_t		sc_mem_bt;
+	bus_space_handle_t	sc_mem_bh;
+	bus_size_t		sc_mem_size;
+	bus_dma_tag_t		sc_dmat;
+	pci_chipset_tag_t	sc_pct;
+	pcitag_t		sc_pcitag;
+	void			*sc_irq_handle;
+	struct mii_data		sc_miibus;
+	uint8_t			vte_eaddr[ETHER_ADDR_LEN];
+	int			vte_flags;
+#define	VTE_FLAG_LINK		0x8000
+
+	struct timeout		vte_tick_ch;
+	struct vte_hw_stats	vte_stats;
+	struct vte_chain_data	vte_cdata;
+	int			vte_int_rx_mod;
+	int			vte_int_tx_mod;
+};
+
+/* Register access macros. */
+#define	CSR_WRITE_2(_sc, reg, val)	\
+	bus_space_write_2((sc)->sc_mem_bt, (sc)->sc_mem_bh, (reg), (val))
+#define	CSR_READ_2(_sc, reg)		\
+	bus_space_read_2((sc)->sc_mem_bt, (sc)->sc_mem_bh, (reg))
+
+#define	VTE_TX_TIMEOUT		5
+#define	VTE_RESET_TIMEOUT	100
+#define	VTE_TIMEOUT		1000
+#define	VTE_PHY_TIMEOUT		1000
+
+#endif	/* _IF_VTEREG_H */