sync to netbsd

7 files changed, 824 insertions, 0 deletions

diff --git a/distrib/arm32/floppies/inst/Makefile b/distrib/arm32/floppies/inst/Makefile
new file mode 100644
index 00000000000..14f394c6cdd
--- /dev/null
+++ b/distrib/arm32/floppies/inst/Makefile
@@ -0,0 +1,8 @@
+# $NetBSD: Makefile,v 1.1 1996/05/16 19:58:54 mark Exp $
+
+TOP=		${.CURDIR}/..
+
+.include "${TOP}/Makefile.inc"
+IMAGE=		inst-${REV}.fs
+
+.include "${TOP}/inst-common/Makefile.inc"
diff --git a/distrib/arm32/floppies/inst/disktab.preinstall b/distrib/arm32/floppies/inst/disktab.preinstall
new file mode 100644
index 00000000000..5fe26a7d81c
--- /dev/null
+++ b/distrib/arm32/floppies/inst/disktab.preinstall
@@ -0,0 +1,29 @@
+# Disk geometry and partition layout tables. 
+# Key:
+#	dt	controller type
+#	ty	type of disk (fixed, removeable, simulated)
+#	d[0-4]	drive-type-dependent parameters
+#	ns	#sectors/track
+#	nt	#tracks/cylinder
+#	nc	#cylinders/disk
+#	sc	#sectors/cylinder, nc*nt default
+#	su	#sectors/unit, sc*nc default
+#	se	sector size, DEV_BSIZE default
+#	rm	rpm, 3600 default
+#	sf	supports bad144-style bad sector forwarding
+#	sk	sector skew per track, default 0
+#	cs	sector skew per cylinder, default 0
+#	hs	headswitch time, default 0
+#	ts	one-cylinder seek time, default 0
+#	il	sector interleave (n:1), 1 default
+#	bs	boot block size, default BBSIZE
+#	sb	superblock size, default SBSIZE
+#	o[a-h]	partition offsets in sectors
+#	p[a-h]	partition sizes in sectors
+#	b[a-h]	partition block sizes in bytes
+#	f[a-h]	partition fragment sizes in bytes
+#	t[a-h]	partition types (filesystem, swap, etc)
+#
+# All partition sizes reserve space for bad sector tables.
+# (5 cylinders needed for maintenance + replacement sectors)
+#
diff --git a/distrib/arm32/floppies/inst/dot.hdprofile b/distrib/arm32/floppies/inst/dot.hdprofile
new file mode 100644
index 00000000000..b5b68311738
--- /dev/null
+++ b/distrib/arm32/floppies/inst/dot.hdprofile
@@ -0,0 +1,63 @@
+# $NetBSD: dot.hdprofile,v 1.1 1996/05/16 19:58:57 mark Exp $
+#
+# Copyright (c) 1994 Christopher G. Demetriou
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed by Christopher G. Demetriou.
+# 4. The name of the author may not be used to endorse or promote products
+#    derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+PATH=/sbin:/bin:/usr/bin:/usr/sbin:/
+export PATH
+TERM=vt100
+export TERM
+
+umask 022
+
+if [ "X${DONEPROFILE}" = "X" ]; then
+	DONEPROFILE=YES
+
+	echo "Checking filesystems..."
+	fsck -y
+
+	echo "Mounting filesystems..."
+	mount -a
+	mount -t kernfs /kern /kern 2>/dev/null >/dev/null
+
+	# set up some sane defaults
+	echo 'erase ^H, werase ^W, kill ^U, intr ^C'
+	stty newcrt werase ^W intr ^C kill ^U erase ^H 9600
+	echo ''
+
+	# run update, so that installed software is written as it goes.
+	update
+
+	# pull in the functions that people will use from the shell prompt.
+	. /.commonutils
+	. /.instutils
+
+	echo "Follow the installation directions to install the NetBSD"
+	echo "distribution sets."
+fi
diff --git a/distrib/arm32/floppies/inst/dot.instutils b/distrib/arm32/floppies/inst/dot.instutils
new file mode 100644
index 00000000000..46f29916203
--- /dev/null
+++ b/distrib/arm32/floppies/inst/dot.instutils
@@ -0,0 +1,157 @@
+# $NetBSD: dot.instutils,v 1.1 1996/05/16 19:58:58 mark Exp $
+#
+# Copyright (c) 1994 Christopher G. Demetriou
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed by Christopher G. Demetriou.
+# 4. The name of the author may not be used to endorse or promote products
+#    derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+# Installation configuration utilites (functions), to get NetBSD configured
+# reasonably once it is installed on the hard disk.  These are meant to be
+# invoked from the shell prompt, by people installing NetBSD.
+
+Configure()
+{
+	DEV=/dev
+	ETC=/etc
+	if [ ! -f /etc/fstab ]; then
+		DEV=/mnt/dev
+		ETC=/mnt/etc
+	fi
+
+	echo	"You will now be prompted for information about this"
+	echo	"machine.  If you hit return, the default answer (in"
+	echo	"brackets) will be used."
+
+	echo	""
+	echo -n	"What is this machine's hostname? [unknown.host.domain] "
+	read hname
+	if [ "$hname" = "" ]; then
+		hname=unknown.host.domain
+	fi
+	echo $hname > ${ETC}/myname
+	proto_domain=`echo $hname | sed -e 's/[^.]*\.//'`
+
+	echo	""
+	echo	"What domain is this machine in (this is NOT its YP"
+	echo -n	"domain name)? [$proto_domain] "
+	read dname
+	if [ "$dname" = "" ]; then
+		dname=$proto_domain
+	fi
+
+	echo	""
+	if [ -e $ETC/sendmail.cf ]; then
+		echo	"WARNING: A default sendmail.cf exists, and probably"
+		echo	"needs to be tuned and/or replaced, to work properly at"
+		echo	"your site!"
+	else
+		echo	"WARNING: No default sendmail.cf installed.  Did you"
+		echo	"forget to install the 'etc' distribution?"
+	fi
+
+	echo	"127.0.0.1	localhost localhost.$dname" > ${ETC}/hosts
+
+	echo	""
+	echo -n	"Does this machine have an ethernet interface? [y] "
+        read resp
+        case "$resp" in
+	n*)
+		;;
+	*)
+		intf=
+		while [ "$intf" = "" ]; do
+			echo -n "What is the primary interface name "
+			echo -n "(e.g. ed0, ep0, etc)? "
+			read intf
+		done
+		echo -n "What is the hostname for this interface? [$hname] "
+		read ifname
+		if [ "$ifname" = "" ]; then
+			ifname=$hname
+		fi
+		ifaddr=
+		while [ "$ifaddr" = "" ]; do
+			echo -n "What is the IP address associated with "
+			echo -n "interface ${intf}? "
+			read ifaddr
+		done
+		echo "$ifaddr	$ifname `echo $ifname | sed -e s/\.$dname//`" \
+		    >> ${ETC}/hosts
+
+		echo -n "Does this interface have a special netmask? [n] "
+		read resp
+		case "$resp" in
+			y*)
+				echo -n "What is the netmask? [0xffffff00] "
+				read ifnetmask
+				if [ "$ifnetmask" = "" ]; then
+					ifnetmask=0xffffff00
+				fi
+				;;
+			*)
+				ifnetmask=
+				;;
+		esac
+
+		echo -n "Does this interface need additional flags? [n] "
+		read resp
+		case "$resp" in
+			y*)
+				echo -n "What flags? [link0] "
+				read ifflags
+				if [ "$ifflags" = "" ]; then
+					ifflags=link0
+				fi
+				;;
+			*)
+				ifflags=
+				;;
+		esac
+		echo "inet $ifname $ifnetmask $ifflags" > ${ETC}/hostname.$intf
+
+		echo    ""
+		echo -n	"WARNING: if you have any more ethernet interfaces, "
+		echo	"you will have to configure"
+		echo -n "them by hand.  Read the comments in /etc/netstart to "
+		echo	"learn how to do this."
+		;;
+	esac
+	
+	echo	""
+	echo -n	"Making device nodes (may take a while)..."
+	cd ${DEV}
+	sh MAKEDEV all
+	echo	" done."
+
+	sync
+
+	echo	""
+	echo	"If you haven't already installed a kernel on the hard drive"
+	echo	"using your kernel-copy floppy, do so now.  Kernel"
+	echo 	"installation instructions can be found in the"
+	echo 	"installation notes."	
+}
diff --git a/distrib/arm32/floppies/inst/dot.profile b/distrib/arm32/floppies/inst/dot.profile
new file mode 100644
index 00000000000..a1944936935
--- /dev/null
+++ b/distrib/arm32/floppies/inst/dot.profile
@@ -0,0 +1,59 @@
+#
+# Copyright (c) 1994 Christopher G. Demetriou
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed by Christopher G. Demetriou.
+# 4. The name of the author may not be used to endorse or promote products
+#    derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#       $Id: dot.profile,v 1.1 1996/09/05 21:26:18 deraadt Exp $
+
+PATH=/sbin:/bin:/usr/bin:/usr/sbin:/
+export PATH
+TERM=vt100
+export TERM
+
+umask 022
+
+if [ "X${DONEPROFILE}" = "X" ]; then
+	DONEPROFILE=YES
+
+	# set up some sane defaults
+	echo 'erase ^H, werase ^W, kill ^U, intr ^C'
+	stty newcrt werase ^W intr ^C kill ^U erase ^H 9600
+	echo ''
+
+	# run update, so that installed software is written as it goes.
+	update
+
+	# mount the kern_fs so that we can examine the dmesg state
+	mount -t kernfs /kern /kern
+
+	# pull in the functions that people will use from the shell prompt.
+	. /.commonutils
+	. /.instutils
+
+	# run the installation script.
+	install
+fi
diff --git a/distrib/arm32/floppies/inst/install.sh b/distrib/arm32/floppies/inst/install.sh
new file mode 100644
index 00000000000..5d772a421d9
--- /dev/null
+++ b/distrib/arm32/floppies/inst/install.sh
@@ -0,0 +1,497 @@
+#!/bin/sh
+#
+# Copyright (c) 1994 Christopher G. Demetriou
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed by Christopher G. Demetriou.
+# 4. The name of the author may not be used to endorse or promote products
+#    derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+#	$Id: install.sh,v 1.1 1996/09/05 21:26:19 deraadt Exp $
+
+#	NetBSD installation script.
+#	In a perfect world, this would be a nice C program, with a reasonable
+#	user interface.
+
+stty erase ^H
+
+DT=/etc/disktab				# /etc/disktab
+FSTABDIR=/mnt/etc			# /mnt/etc
+#DONTDOIT=echo
+
+VERSION=1.1
+FSTAB=${FSTABDIR}/fstab
+
+getresp() {
+	read resp
+	if [ "X$resp" = "X" ]; then
+		resp=$1
+	fi
+}
+
+echo	"Welcome to the NetBSD ${VERSION} installation program."
+echo	""
+echo	"This program is designed to help you put NetBSD on your hard disk,"
+echo	"in a simple and rational way.  You'll be asked several questions,"
+echo	"and it would probably be useful to have your disk's hardware"
+echo	"manual, the installation notes, and a calculator handy."
+echo	""
+echo	"In particular, you will need to know some reasonably detailed"
+echo	"information about your disk's geometry, because there is currently"
+echo	"no way this this program can figure that information out."
+echo	""
+echo	"As with anything which modifies your hard drive's contents, this"
+echo	"program can cause SIGNIFICANT data loss, and you are advised"
+echo	"to make sure your hard drive is backed up before beginning the"
+echo	"installation process."
+echo	""
+echo	"Default answers are displyed in brackets after the questions."
+echo	"You can hit Control-C at any time to quit, but if you do so at a"
+echo	"prompt, you may have to hit return.  Also, quitting in the middle of"
+echo	"installation may leave your system in an inconsistent state."
+echo	""
+echo -n "Proceed with installation? [n] "
+getresp "n"
+case "$resp" in
+	y*|Y*)
+		echo	"Cool!  Let's get to it..."
+		;;
+	*)
+		echo	""
+		echo	"OK, then.  Enter 'halt' at the prompt to halt the"
+		echo	"machine."
+		exit
+		;;
+esac
+
+echo	""
+echo	"To do the installation, you'll need to provide some information about"
+echo	"your disk."
+echo	""
+echo	"NetBSD can be installed on ST506, ESDI, IDE, or SCSI disks."
+echo -n	"What kind of disk will you be installing on? [IDE] "
+getresp "IDE"
+case "$resp" in
+	esdi|ESDI|st506|ST506)
+		drivetype=wd
+		echo -n "Does it support _automatic_ sector remapping? [y] "
+		getresp "y"
+		case "$resp" in
+			n*|N*)
+				sect_fwd="sf:"
+				;;
+			*)
+				sect_fwd=""
+				;;
+		esac
+		;;
+	ide|IDE)
+		drivetype=wd
+		sect_fwd=""
+		type=ST506
+		;;
+	scsi|SCSI)
+		drivetype=sd
+		sect_fwd=""
+		type=SCSI
+		;;
+esac
+
+# find out what units are possible for that disk, and query the user.
+driveunits=`ls /dev/${drivetype}?a | sed -e 's,/dev/\(...\)a,\1,g'`
+if [ "X${driveunits}" = "X" ]; then
+	echo	"FATAL ERROR:"
+	echo	"No devices for disks of type '${drivetype}'."
+	echo	"This is probably a bug in the install disks."
+	echo	"Exiting install program."
+	exit
+fi
+prefdrive=${drivetype}0
+
+echo	""
+echo	"The following ${drivetype}-type disks are supported by this"
+echo	"installation procedure:"
+echo	"	"${driveunits}
+echo	"Note that they may not exist in _your_ machine; the list of"
+echo	"disks in your machine was printed when the system was booting."
+echo	""
+while [ "X${drivename}" = "X" ]; do
+	echo -n	"Which disk would like to install on? [${prefdrive}] "
+	getresp ${prefdrive}
+	otherdrives=`echo "${driveunits}" | sed -e s,${resp},,`
+	if [ "X${driveunits}" = "X${otherdrives}" ]; then
+		echo	""
+		echo	"\"${resp}\" is an invalid drive name.  Valid choices"
+		echo	"are: "${driveunits}
+		echo	""
+	else
+		drivename=${resp}
+	fi
+done
+
+echo	""
+echo	"Using disk ${drivename}."
+echo	""
+echo -n	"What kind of disk is it? (one word please) [my${drivetype}] "
+getresp "my${drivetype}"
+labelname=$resp
+
+echo	""
+echo	"You will now need to provide some information about your disk's"
+echo	"geometry.  This should either be in the User's Manual for your disk,"
+echo	"or you should have written down what NetBSD printed when booting."
+echo	"(Note that he geometry that's printed at boot time is preferred.)"
+echo	""
+echo    "You may choose to view the initial boot messages for your system"
+echo    "again right now if you like."
+echo -n "View the boot messages again? [n] "
+getresp "n"
+case "$resp" in
+	y*|Y*)
+		more /kern/msgbuf
+		;;
+	*)
+		echo	""
+		;;
+esac
+
+echo	""
+echo	"You will now enter the disk geometry information"
+echo	""
+
+echo -n	"Number of bytes per disk sector? [512] "
+getresp 512
+bytes_per_sect="$resp"
+
+echo -n "Number of disk cylinders? "
+getresp
+cyls_per_disk="$resp"
+
+echo -n	"Number of disk tracks (heads) per disk cylinder? "
+getresp
+tracks_per_cyl="$resp"
+
+echo -n	"Number of disk sectors per disk track? "
+getresp
+sects_per_track="$resp"
+
+cylindersize=`expr $sects_per_track \* $tracks_per_cyl`
+cylbytes=`expr $cylindersize \* $bytes_per_sect`
+disksize=`expr $cylindersize \* $cyls_per_disk`
+
+echo	""
+echo	"Your disk has a total of $disksize $bytes_per_sect byte sectors,"
+echo	"arranged as $cyls_per_disk cylinders which contain $cylindersize "
+echo	"sectors ($cylbytes bytes) each."
+echo	""
+echo	"You can specify partition sizes in cylinders ('c') or sectors ('s')."
+while [ "X${sizemult}" = "X" ]; do
+	echo -n	"What units would you like to use? [cylinders] "
+	getresp cylinders
+	case "$resp" in
+		c*|C*)
+			sizemult=$cylindersize
+			sizeunit="cylinders"
+			;;
+		s*|S*)
+			sizemult=1
+			sizeunit="sectors"
+			;;
+		*)
+			echo	""
+			echo	"Enter cylinders ('c') or sectors ('s')."
+			;;
+	esac
+done
+
+if [ $sizeunit = "sectors" ]; then
+	echo	""
+	echo	"For best disk performance, partitions should begin and end on"
+	echo	"cylinder boundaries.  Wherever possible, pick sizes that are"
+	echo	"multiples of the cylinder size ($cylindersize sectors)."
+fi
+
+echo -n ""
+echo -n "Size of NetBSD portion of disk (in $sizeunit)? "
+getresp
+partition=$resp
+partition_sects=`expr $resp \* $sizemult`
+part_offset=0
+if [ $partition_sects -lt $disksize ]; then
+	echo -n "Offset of NetBSD portion of disk (in $sizeunit)? "
+	getresp
+	part_offset=$resp
+fi
+badspacesec=0
+if [ "$sect_fwd" = "sf:" ]; then
+	badspacecyl=`expr $sects_per_track + 126`
+	badspacecyl=`expr $badspacecyl + $cylindersize - 1`
+	badspacecyl=`expr $badspacecyl / $cylindersize`
+	badspacesec=`expr $badspacecyl \* $cylindersize`
+	echo	""
+	echo -n "Using $badspacesec sectors ($badspacecyl cylinders) for the "
+	echo	"bad144 bad block table"
+fi
+
+sects_left=`expr $partition_sects - $badspacesec`
+units_left=`expr $sects_left / $sizemult`
+echo	""
+echo	"There are $units_left $sizeunit left to allocate."
+echo	""
+root=0
+while [ $root -eq 0 ]; do
+	echo -n "Root partition size (in $sizeunit)? "
+	getresp
+	case $resp in
+		[1-9]*)
+			total=$resp
+			if [ $total -gt $units_left ]; then
+				echo -n	"Root size is greater than remaining "
+				echo	"free space on disk."
+			else
+				root=$resp
+			fi
+			;;
+	esac
+done
+root_offset=$part_offset
+part_used=`expr $root + $badspacesec / $sizemult`
+units_left=`expr $partition - $part_used`
+echo	""
+
+swap=0
+while [ $swap -eq 0 ]; do 
+	echo	"$units_left $sizeunit remaining in NetBSD portion of disk."
+	echo -n	"Swap partition size (in $sizeunit)? "
+	getresp
+	case $resp in
+		[1-9]*)
+			if [ $swap -gt $units_left ]; then
+				echo -n	"Swap size is greater than remaining "
+				echo	"free space on disk."
+			else
+				swap=$resp
+			fi
+			;;
+	esac
+done
+swap_offset=`expr $root_offset + $root`
+part_used=`expr $part_used + $swap`
+echo	""
+
+fragsize=1024
+blocksize=8192
+$DONTDOIT mount -u /dev/rd0 /
+cat /etc/disktab.preinstall > $DT
+echo	"" >> $DT
+echo	"$labelname|NetBSD installation generated:\\" >> $DT
+echo	"	:dt=${type}:ty=winchester:\\" >> $DT
+echo -n	"	:nc#${cyls_per_disk}:ns#${sects_per_track}" >> $DT
+echo	":nt#${tracks_per_cyl}:\\" >> $DT
+echo	"	:se#${bytes_per_sect}:${sect_fwd}\\" >> $DT
+_size=`expr $root \* $sizemult`
+_offset=`expr $root_offset \* $sizemult`
+echo -n	"	:pa#${_size}:oa#${_offset}" >> $DT
+echo	":ta=4.2BSD:ba#${blocksize}:fa#${fragsize}:\\" >> $DT
+_size=`expr $swap \* $sizemult`
+_offset=`expr $swap_offset \* $sizemult`
+echo	"	:pb#${_size}:ob#${_offset}:tb=swap:\\" >> $DT
+_size=`expr $partition \* $sizemult`
+echo	"	:pd#${_size}:od#0:\\" >> $DT
+
+echo	"You will now have to enter information about any other partitions"
+echo	"to be created in the NetBSD portion of the disk.  This process will"
+echo	"be complete when you've filled up all remaining space in the NetBSD"
+echo	"portion of the disk."
+
+while [ $part_used -lt $partition ]; do
+	part_size=0
+	units_left=`expr $partition - $part_used`
+	while [ $part_size -eq 0 ]; do
+		echo	""
+		echo -n	"$units_left $sizeunit remaining in NetBSD portion of "
+		echo	"the disk"
+		echo -n "Next partition size (in $sizeunit)? "
+		getresp
+		case $resp in
+			[1-9]*)
+				total=`expr $part_used + $resp`
+				if [ $total -gt $partition ]; then
+					echo -n	"That would make the parition"
+					echo	"too large to fit!"
+				else
+					part_size=$resp
+					part_used=$total
+					part_name=""
+					while [ "$part_name" = "" ]; do
+						echo -n "Mount point? "
+						getresp
+						part_name=$resp
+					done
+				fi
+				;;
+		esac
+	done
+	if [ "$ename" = "" ]; then
+		ename=$part_name
+		offset=`expr $part_offset + $root + $swap`
+		_size=`expr $part_size \* $sizemult`
+		_offset=`expr $offset \* $sizemult`
+		echo -n "	:pe#${_size}:oe#${_offset}" >> $DT
+		echo ":te=4.2BSD:be#${blocksize}:fe#${fragsize}:\\" >> $DT
+		offset=`expr $offset + $part_size`
+	elif [ "$fname" = "" ]; then
+		fname=$part_name
+		_size=`expr $part_size \* $sizemult`
+		_offset=`expr $offset \* $sizemult`
+		echo -n "	:pf#${_size}:of#${_offset}" >> $DT
+		echo ":tf=4.2BSD:bf#${blocksize}:ff#${fragsize}:\\" >> $DT
+		offset=`expr $offset + $part_size`
+	elif [ "$gname" = "" ]; then
+		gname=$part_name
+		_size=`expr $part_size \* $sizemult`
+		_offset=`expr $offset \* $sizemult`
+		echo -n "	:pg#${_size}:og#${_offset}" >> $DT
+		echo ":tg=4.2BSD:bg#${blocksize}:fg#${fragsize}:\\" >> $DT
+		offset=`expr $offset + $part_size`
+	elif [ "$hname" = "" ]; then
+		hname=$part_name
+		_size=`expr $part_size \* $sizemult`
+		_offset=`expr $offset \* $sizemult`
+		echo -n "	:ph#${_size}:oh#${_offset}" >> $DT
+		echo ":th=4.2BSD:bh#${blocksize}:fh#${fragsize}:\\" >> $DT
+		part_used=$partition
+	fi
+done
+echo	"	:pc#${disksize}:oc#0:" >> $DT
+sync
+
+echo	""
+echo	"THIS IS YOUR LAST CHANCE!!!"
+echo	""
+echo -n	"Are you SURE you want NetBSD installed on your hard drive? (yes/no) "
+answer=""
+while [ "$answer" = "" ]; do
+	getresp
+	case $resp in
+		yes|YES)
+			echo	""
+			echo	"Here we go..."
+			answer=yes
+			;;
+		no|NO)
+			echo	""
+			echo -n	"OK, then.  enter 'halt' to halt the machine.  "
+			exit
+			;;
+		*)
+			echo -n "I want a yes or no answer...  well? "
+			;;
+	esac
+done
+
+echo	""
+echo -n	"Labeling disk $drivename..."
+$DONTDOIT disklabel -w -r $drivename $labelname
+echo	" done."
+
+if [ "$sect_fwd" = "sf:" ]; then
+	echo -n "Initializing bad144 badblock table..."
+	$DONTDOIT bad144 $drivename 0
+	echo " done."
+fi
+
+echo	"Initializing root filesystem, and mounting..."
+$DONTDOIT newfs /dev/r${drivename}a $name
+$DONTDOIT mount -v /dev/${drivename}a /mnt
+if [ "$ename" != "" ]; then
+	echo	""
+	echo	"Initializing $ename filesystem, and mounting..."
+	$DONTDOIT newfs /dev/r${drivename}e $name
+	$DONTDOIT mkdir -p /mnt/$ename
+	$DONTDOIT mount -v /dev/${drivename}e /mnt/$ename
+fi
+if [ "$fname" != "" ]; then
+	echo	""
+	echo	"Initializing $fname filesystem, and mounting..."
+	$DONTDOIT newfs /dev/r${drivename}f $name
+	$DONTDOIT mkdir -p /mnt/$fname
+	$DONTDOIT mount -v /dev/${drivename}f /mnt/$fname
+fi
+if [ "$gname" != "" ]; then
+	echo	""
+	echo	"Initializing $gname filesystem, and mounting..."
+	$DONTDOIT newfs /dev/r${drivename}g $name
+	$DONTDOIT mkdir -p /mnt/$gname
+	$DONTDOIT mount -v /dev/${drivename}g /mnt/$gname
+fi
+if [ "$hname" != "" ]; then
+	echo	""
+	echo	"Initializing $hname filesystem, and mounting..."
+	$DONTDOIT newfs /dev/r${drivename}h $name
+	$DONTDOIT mkdir -p /mnt/$hname
+	$DONTDOIT mount -v /dev/${drivename}h /mnt/$hname
+fi
+
+echo	""
+echo    "Populating filesystems with bootstrapping binaries and config files"
+$DONTDOIT tar --one-file-system -cf - . | (cd /mnt ; tar --unlink -xpf - )
+$DONTDOIT cp /tmp/.hdprofile /mnt/.profile
+
+echo	""
+echo -n	"Creating an fstab..."
+echo /dev/${drivename}a / ffs rw 1 1 | sed -e s,//,/, > $FSTAB
+if [ "$ename" != "" ]; then
+	echo /dev/${drivename}e /$ename ffs rw 1 2 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$fname" != "" ]; then
+	echo /dev/${drivename}f /$fname ffs rw 1 3 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$gname" != "" ]; then
+	echo /dev/${drivename}g /$gname ffs rw 1 4 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$hname" != "" ]; then
+	echo /dev/${drivename}h /$hname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB
+fi
+sync
+echo	" done."
+
+echo	""
+echo	""
+echo	"OK!  The preliminary work of setting up your disk is now complete."
+echo 	""
+echo	"The remaining tasks are:"
+echo	""
+echo	"To copy a NetBSD kernel to the hard drive's root filesystem."
+echo	"Once accomplished, you can boot off the hard drive."
+echo	""
+echo	"To load and install the NetBSD distribution sets."
+echo	"Currently the hard drive's root filesystem is mounted on /mnt"
+echo	""
+echo	"Consult the installation notes which will describe how to"
+echo	"install the distribution sets and kernel.  Post-installation"
+echo	"configuration is also discussed therein."
+echo	""
+echo	"GOOD LUCK!"
+echo	""
diff --git a/distrib/arm32/floppies/inst/list b/distrib/arm32/floppies/inst/list
new file mode 100644
index 00000000000..23a9fb8532e
--- /dev/null
+++ b/distrib/arm32/floppies/inst/list
@@ -0,0 +1,11 @@
+# $NetBSD: list,v 1.1 1996/05/16 19:59:01 mark Exp $
+
+# the disktab explanation file
+COPY	disktab.preinstall		etc/disktab.preinstall
+
+# and the installation tools
+COPY	dot.profile			.profile
+COPY	dot.instutils			.instutils
+COPY	install.sh			install
+COPY	dot.hdprofile			tmp/.hdprofile
+SPECIAL	chmod 755 install