initial import of NetBSD tree

12 files changed, 1431 insertions, 0 deletions

diff --git a/distrib/hp300/miniroot/Makefile b/distrib/hp300/miniroot/Makefile
new file mode 100644
index 00000000000..a37f1d50bc5
--- /dev/null
+++ b/distrib/hp300/miniroot/Makefile
@@ -0,0 +1,5 @@
+#	$NetBSD: Makefile,v 1.1 1995/10/03 22:47:53 thorpej Exp $
+
+SUBDIR=	inst
+
+.include <bsd.subdir.mk>
diff --git a/distrib/hp300/miniroot/Makefile.inc b/distrib/hp300/miniroot/Makefile.inc
new file mode 100644
index 00000000000..e5d8ce7abe4
--- /dev/null
+++ b/distrib/hp300/miniroot/Makefile.inc
@@ -0,0 +1,4 @@
+#	$NetBSD: Makefile.inc,v 1.1 1995/10/03 22:47:55 thorpej Exp $
+
+# Revision is 1.0A
+REV=	10A
diff --git a/distrib/hp300/miniroot/inst-common/Makefile.inc b/distrib/hp300/miniroot/inst-common/Makefile.inc
new file mode 100644
index 00000000000..ac46658a7ee
--- /dev/null
+++ b/distrib/hp300/miniroot/inst-common/Makefile.inc
@@ -0,0 +1,49 @@
+#	$NetBSD: Makefile.inc,v 1.1 1995/10/03 22:48:02 thorpej Exp $
+
+# TOP is assumed to be defined by Makefile including this one.
+
+CBIN=		instbin
+COMMONDIR=	${TOP}/inst-common
+
+MOUNT_POINT?=	/mnt
+VND?=		vnd0
+VND_DEV=	/dev/${VND}a
+VND_RDEV=	/dev/r${VND}a
+IMAGE?=		xxx-${REV}.fs
+MDEC=		${DESTDIR}/usr/mdec
+
+LISTS=		${COMMONDIR}/list ${.CURDIR}/list
+CRUNCHCONF=	${COMMONDIR}/${CBIN}.conf
+MTREE=		${COMMONDIR}/mtree.conf
+
+all: ${CBIN}
+	dd if=/dev/zero of=${IMAGE} bs=512k count=10
+	vnconfig -v -c ${VND_DEV} ${IMAGE}
+	newfs -m 0 -o space ${VND_RDEV} miniroot
+	mount ${VND_DEV} ${MOUNT_POINT}
+	mtree -def ${MTREE} -p ${MOUNT_POINT}/ -u
+	TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \
+	    TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${LISTS}
+	@echo ""
+	@df -i ${MOUNT_POINT}
+	@echo ""
+	umount ${MOUNT_POINT}
+	vnconfig -u ${VND_DEV}
+	cat /*bin/* > /dev/null
+
+unconfig:
+	-umount -f ${MOUNT_POINT}
+	-vnconfig -u ${VND_DEV}
+	-/bin/rm -f ${IMAGE}
+
+${CBIN}.mk ${CBIN}.cache ${CBIN}.c: ${CRUNCHCONF}
+	crunchgen -D ${TOP}/../../.. -L ${DESTDIR}/usr/lib ${CRUNCHCONF}
+
+${CBIN}: ${CBIN}.mk ${CBIN}.cache ${CBIN}.c
+	make -f ${CBIN}.mk all
+
+clean cleandir:
+	/bin/rm -f core ${IMAGE} ${CBIN} ${CBIN}.mk ${CBIN}.cache *.o *.lo *.c
+
+.include <bsd.obj.mk>
+.include <bsd.subdir.mk>
diff --git a/distrib/hp300/miniroot/inst-common/instbin.conf b/distrib/hp300/miniroot/inst-common/instbin.conf
new file mode 100644
index 00000000000..c3a608e8fc6
--- /dev/null
+++ b/distrib/hp300/miniroot/inst-common/instbin.conf
@@ -0,0 +1,27 @@
+#	$NetBSD: instbin.conf,v 1.1 1995/10/03 22:48:03 thorpej Exp $	
+#
+# instbin.conf - configuration for hp300 miniroot
+
+srcdirs bin sbin usr.bin usr.sbin gnu/usr.bin usr.bin/vi
+
+progs bad144 basename cat cut chflags chmod chown chroot cp dd df disklabel
+progs dmesg ed expr fsck ftp gawk grep gzip hostname ifconfig init ln ls
+progs mkdir mknod more mount mount_cd9660 mount_ffs mount_nfs mt mv newfs ping
+progs pwd reboot rm route sed sh shutdown slattach sleep strings stty sync tar
+progs test tip tset umount update
+
+# XXX catch vi; see above
+progs common
+
+ln chown chgrp
+ln gawk awk
+ln gzip gzcat gunzip
+ln sh -sh		# init invokes the shell this way
+ln test [
+ln mount_cd9660 cd9660
+ln mount_ffs ffs
+ln mount_nfs nfs
+ln reboot halt
+ln common vi		# XXX catch vi; see above
+
+libs -ledit -lutil -lcurses -ltermcap -lcrypt -ll -lm -lkvm
diff --git a/distrib/hp300/miniroot/inst-common/list b/distrib/hp300/miniroot/inst-common/list
new file mode 100644
index 00000000000..d184032b24e
--- /dev/null
+++ b/distrib/hp300/miniroot/inst-common/list
@@ -0,0 +1,96 @@
+#	$NetBSD: list,v 1.1 1995/10/03 22:48:04 thorpej Exp $
+
+# copy the crunched binary, link to it, and kill it
+COPY	${OBJDIR}/instbin	instbin
+LINK	instbin			bin/cat
+LINK	instbin			bin/chmod
+LINK	instbin			bin/cp
+LINK	instbin			bin/dd
+LINK	instbin			bin/df
+LINK	instbin			bin/ed
+LINK	instbin			bin/expr
+LINK	instbin			bin/hostname
+LINK	instbin			bin/ln
+LINK	instbin			bin/ls
+LINK	instbin			bin/mkdir
+LINK	instbin			bin/mt
+LINK	instbin			bin/mv
+LINK	instbin			bin/pwd
+LINK	instbin			bin/rm
+LINK	instbin			bin/sh
+LINK	instbin			bin/stty
+LINK	instbin			bin/sleep
+LINK	instbin			bin/sync
+LINK	instbin			bin/test
+LINK	instbin			bin/[
+LINK	instbin			sbin/disklabel
+LINK	instbin			sbin/dmesg
+LINK	instbin			sbin/fsck
+LINK	instbin			sbin/halt
+LINK	instbin			sbin/ifconfig
+LINK	instbin			sbin/init
+LINK	instbin			sbin/mknod
+LINK	instbin			sbin/mount
+LINK	instbin			sbin/mount_cd9660
+LINK	instbin			sbin/mount_ffs
+LINK	instbin			sbin/mount_nfs
+LINK	instbin			sbin/newfs
+LINK	instbin			sbin/ping
+LINK	instbin			sbin/reboot
+LINK	instbin			sbin/route
+LINK	instbin			sbin/shutdown
+LINK	instbin			sbin/slattach
+LINK	instbin			sbin/umount
+SYMLINK	/instbin		usr/bin/awk
+SYMLINK	/instbin		usr/bin/basename
+SYMLINK	/instbin		usr/bin/chflags
+SYMLINK	/instbin		usr/bin/chgrp
+SYMLINK	/instbin		usr/bin/cut
+SYMLINK	/instbin		usr/bin/ftp
+SYMLINK	/instbin		usr/bin/grep
+SYMLINK	/instbin		usr/bin/gunzip
+SYMLINK	/instbin		usr/bin/gzcat
+SYMLINK	/instbin		usr/bin/gzip
+SYMLINK	/instbin		usr/bin/more
+SYMLINK	/instbin		usr/bin/sed
+SYMLINK	/instbin		usr/bin/strings
+SYMLINK	/instbin		usr/bin/tar
+SYMLINK	/instbin		usr/bin/tip
+SYMLINK	/instbin		usr/bin/tset
+SYMLINK	/instbin		usr/bin/vi
+SYMLINK	/instbin		usr/sbin/bad144
+SYMLINK	/instbin		usr/sbin/chown
+SYMLINK	/instbin		usr/sbin/chroot
+SYMLINK	/instbin		usr/sbin/update
+
+# We can only get this program this way.
+COPY	${DESTDIR}/sbin/mount_mfs	sbin/mount_mfs
+SPECIAL	chmod 555 sbin/mount_mfs
+
+# Minimize use of MFS
+SYMLINK	/tmp	var/tmp
+
+# copy the MAKEDEV script and make some devices
+COPY	${DESTDIR}/dev/MAKEDEV		dev/MAKEDEV
+COPY	${DESTDIR}/dev/MAKEDEV.local	dev/MAKEDEV.local
+SPECIAL	cd dev; sh MAKEDEV all
+SPECIAL	/bin/rm dev/MAKEDEV
+
+# we need the contents of /usr/mdec
+COPYDIR	${DESTDIR}/usr/mdec	usr/mdec
+
+# various files that we need in /etc for the install
+COPY	${DESTDIR}/etc/group		etc/group
+COPY	${DESTDIR}/etc/master.passwd	etc/master.passwd
+COPY	${DESTDIR}/etc/passwd		etc/passwd
+COPY	${DESTDIR}/etc/protocols	etc/protocols
+COPY	${DESTDIR}/etc/pwd.db		etc/pwd.db
+COPY	${DESTDIR}/etc/services		etc/services
+COPY	${DESTDIR}/etc/spwd.db		etc/spwd.db
+COPY	${DESTDIR}/etc/disktab		etc/disktab.shadow
+SYMLINK	/tmp/disktab.shadow		etc/disktab
+SYMLINK /tmp/fstab.shadow		etc/fstab
+SYMLINK	/tmp/hosts			etc/hosts
+
+# and the termcap file
+COPY	${TOPDIR}/../../../share/termcap/termcap.src usr/share/misc/termcap
diff --git a/distrib/hp300/miniroot/inst-common/mtree.conf b/distrib/hp300/miniroot/inst-common/mtree.conf
new file mode 100644
index 00000000000..3b90b20cbec
--- /dev/null
+++ b/distrib/hp300/miniroot/inst-common/mtree.conf
@@ -0,0 +1,78 @@
+#	$NetBSD: mtree.conf,v 1.1 1995/10/03 22:48:05 thorpej Exp $
+
+/set type=dir uname=root gname=wheel mode=0755
+# .
+.
+
+# ./bin
+bin
+# ./bin
+..
+
+# ./dev
+dev
+# ./dev
+..
+
+# ./etc
+etc
+# ./etc
+..
+
+# ./mnt
+mnt
+# ./mnt
+..
+
+# ./mnt2
+mnt2
+# ./mnt2
+..
+
+# ./sbin
+sbin
+# ./sbin
+..
+
+# ./tmp
+tmp		mode=01777
+# ./tmp
+..
+
+# ./usr
+usr
+
+# ./usr/bin
+bin
+# ./usr/bin
+..
+
+# ./usr/mdec
+mdec
+# ./usr/mdec
+..
+
+# ./usr/sbin
+sbin
+# ./usr/sbin
+..
+
+# ./usr/share
+share
+
+# ./usr/share/misc
+misc
+# ./usr/share/misc
+..
+
+# ./usr/share
+..
+
+# ./usr
+..
+
+# ./var
+var
+
+# ./
+..
diff --git a/distrib/hp300/miniroot/inst/Makefile b/distrib/hp300/miniroot/inst/Makefile
new file mode 100644
index 00000000000..a56484a0496
--- /dev/null
+++ b/distrib/hp300/miniroot/inst/Makefile
@@ -0,0 +1,8 @@
+#	$NetBSD: Makefile,v 1.1 1995/10/03 22:47:58 thorpej Exp $
+
+TOP=	${.CURDIR}/..
+
+.include "${TOP}/Makefile.inc"
+IMAGE=	inst-${REV}.fs
+
+.include "${TOP}/inst-common/Makefile.inc"
diff --git a/distrib/hp300/miniroot/inst/dot.profile b/distrib/hp300/miniroot/inst/dot.profile
new file mode 100644
index 00000000000..34ca6d39592
--- /dev/null
+++ b/distrib/hp300/miniroot/inst/dot.profile
@@ -0,0 +1,61 @@
+#	$NetBSD: dot.profile,v 1.1 1995/10/03 22:47:59 thorpej Exp $
+#
+# Copyright (c) 1995 Jason R. Thorpe
+# Copyright (c) 1994 Christopher G. Demetriou
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed by Christopher G. Demetriou.
+# 4. The name of the author may not be used to endorse or promote products
+#    derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+PATH=/sbin:/bin:/usr/bin:/usr/sbin:/
+export PATH
+TERM=hp300h
+export TERM
+
+umask 022
+
+if [ "X${DONEPROFILE}" = "X" ]; then
+	DONEPROFILE=YES
+
+	# set up some sane defaults
+	echo 'erase ^H, werase ^W, kill ^U, intr ^C'
+	stty newcrt werase ^W intr ^C kill ^U erase ^H 9600
+
+	# run update, so that installed software is written as it goes.
+	update
+
+	# get the terminal type
+	_forceloop=""
+	while [ "X${_forceloop}" = X"" ]; do
+		eval `tset -s -m ":?$TERM"`
+		if [ "X${TERM}" != X"unknown" ]; then
+			_forceloop="done"
+		fi
+	done
+
+	# run the installation script.
+	/install
+fi
diff --git a/distrib/hp300/miniroot/inst/install.sh b/distrib/hp300/miniroot/inst/install.sh
new file mode 100644
index 00000000000..b4dc105adb8
--- /dev/null
+++ b/distrib/hp300/miniroot/inst/install.sh
@@ -0,0 +1,1026 @@
+#!/bin/sh
+#	$NetBSD: install.sh,v 1.1 1995/10/03 22:48:00 thorpej Exp $
+#
+# Copyright (c) 1995 Jason R. Thorpe.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed for the NetBSD Project
+#	by Jason R. Thorpe.
+# 4. The name of the author may not be used to endorse or promote products
+#    derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#	NetBSD installation script.
+#	In a perfect world, this would be a nice C program, with a reasonable
+#	user interface.
+
+VERSION=1.0A
+ROOTDISK=""				# filled in below
+FILESYSTEMS="/tmp/filesystems"		# used thoughout
+FQDN=""					# domain name
+
+trap "umount /tmp > /dev/null 2>&1" 0
+
+getresp() {
+	read resp
+	if [ "X$resp" = "X" ]; then
+		resp=$1
+	fi
+}
+
+do_mfs_mount() {
+	umount $1 > /dev/null 2>&1
+	if ! mount_mfs -s 2048 swap $1 ; then
+		cat << \__mfs_failed_1
+
+FATAL ERROR: Can't mount the memory filesystem.
+
+__mfs_failed_1
+		exit
+	fi
+
+	# Bleh.  Give mount_mfs a chance to DTRT.
+	sleep 2
+}
+
+getrootdisk() {
+	cat << \__getrootdisk_1
+
+The installation program needs to know which disk to consider
+the root disk.  Note the unit number may be different than
+the unit number you used in the standalone installation
+program.
+
+Available disks are:
+
+__getrootdisk_1
+	dmesg | grep "^rd" | grep "slave"
+	dmesg | grep "^sd" | grep "slave"
+	echo	""
+	echo -n	"Which disk is the root disk? "
+	getresp ""
+	if dmesg | grep "^$resp " | grep "slave" > /dev/null ; then
+		ROOTDISK="$resp"
+	else
+		echo ""
+		echo "The disk $resp does not exist."
+		ROOTDISK=""
+	fi
+}
+
+checkfordisklabel() {
+	disklabel -r $1 > /dev/null 2> /tmp/checkfordisklabel
+	if grep "no disk label" /tmp/checkfordisklabel; then
+		rval="1"
+	elif grep "disk label corrupted" /tmp/checkfordisklabel; then
+		rval="2"
+	else
+		rval="0"
+	fi
+
+	rm -f /tmp/checkfordisklabel
+}
+
+labelmoredisks() {
+	cat << \__labelmoredisks_1
+
+You may label the following disks:
+
+__labelmoredisks_1
+	dmesg | grep "^rd" | grep "slave" | grep -v "${ROOTDISK} "
+	dmesg | grep "^sd" | grep "slave" | grep -v "${ROOTDISK} "
+	echo	""
+	echo -n	"Label which disk? [done] "
+	getresp "done"
+	case "$resp" in
+		done)
+			;;
+
+		*)
+			if dmesg | grep "^$resp " | grep "slave" \
+			    > /dev/null ; then
+				# XXX CODE ME
+				echo "Yup, it exists."
+			else
+				echo ""
+				echo "The disk $resp does not exist."
+			fi
+			;;
+	esac
+}
+
+addhostent() {
+	# $1 - IP address
+	# $2 - symbolic name
+
+	# Create an entry in the hosts table.  If no host table
+	# exists, create one.  If the IP address already exists,
+	# replace it's entry.
+	if [ ! -f /tmp/hosts ]; then
+		echo "127.0.0.1 localhost" > /tmp/hosts
+	fi
+
+	if grep "^$1 " /tmp/hosts > /dev/null; then
+		grep -v "^$1 " /tmp/hosts > /tmp/hosts.new
+		mv /tmp/hosts.new /tmp/hosts
+	fi
+
+	echo "$1 $2 $2.$FQDN" >> /tmp/hosts
+}
+
+addifconfig() {
+	# $1 - interface name
+	# $2 - interface symbolic name
+	# $3 - interface IP address
+	# $4 - interface netmask
+
+	# Create a hostname.* file for the interface.
+	echo "inet $2 $4" > /tmp/hostname.$1
+
+	addhostent $3 $2
+}
+
+configurenetwork() {
+	cat << \__configurenetwork_1
+
+You may configure the following network interfaces:
+
+__configurenetwork_1
+
+	dmesg | grep "^le" | grep "ipl"
+	echo	""
+	echo -n	"Configure which interface? [done] "
+	getresp "done"
+	case "$resp" in
+		done)
+			;;
+
+		*)
+			if dmesg | grep "^$resp " | grep "^le" | grep "ipl" \
+			    > /dev/null ; then
+				_interface_name=$resp
+
+				# Get IP address
+				resp=""		# force one iteration
+				while [ "X${resp}" = X"" ]; do
+					echo -n "IP address? "
+					getresp ""
+					_interface_ip=$resp
+				done
+
+				# Get symbolic name
+				resp=""		# force one iteration
+				while [ "X${resp}" = X"" ]; do
+					echo -n "Symbolic name? "
+					getresp ""
+					_interface_symname=$resp
+				done
+
+				# Get netmask
+				resp=""		# force one iteration
+				while [ "X${resp}" = X"" ]; do
+					echo -n "Netmask? "
+					getresp ""
+					_interface_mask=$resp
+				done
+
+				# Configure the interface.  If it
+				# succeeds, add it to the permanent
+				# network configuration info.
+				ifconfig ${_interface_name} down
+				if ifconfig ${_interface_name} inet \
+				    ${_interface_ip} \
+				    netmask ${_interface_mask} up ; then
+					addifconfig \
+					    ${_interface_name} \
+					    ${_interface_symname} \
+					    ${_interface_ip} \
+					    ${_interface_mask}
+				fi
+			else
+				echo ""
+				echo "The interface $resp does not exist."
+			fi
+			;;
+	esac
+}
+
+install_ftp() {
+	# Get several parameters from the user, and create
+	# a shell script that directs the appropriate
+	# commands into ftp.
+	cat << \__install_ftp_1
+
+This is an automated ftp-based installation process.  You will be asked
+several questions.  The correct set of commands will be placed in a script
+that will be fed to ftp(1).
+
+__install_ftp_1
+	# Get server IP address
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Server IP? [${_ftp_server_ip}] "
+		getresp "${_ftp_server_ip}"
+		_ftp_server_ip=$resp
+	done
+
+	# Get server directory
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Server directory? [${_ftp_server_dir}] "
+		getresp "${_ftp_server_dir}"
+		_ftp_server_dir=$resp
+	done
+
+	# Get login name
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Login? [${_ftp_server_login}] "
+		getresp "${_ftp_server_login}"
+		_ftp_server_login=$resp 
+	done
+
+	# Get password
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Password? [${_ftp_server_password}] "
+		getresp "${_ftp_server_password}"
+		_ftp_server_password=$resp
+	done
+
+	# Get list of files for mget.
+	cat << \__install_ftp_2
+
+You will now be asked for files to extract.  Enter one file at a time.
+When you are done entering files, enter 'done'.
+
+__install_ftp_2
+	echo "#!/bin/sh" > /tmp/ftp-script.sh
+	echo "cd /mnt" >> /tmp/ftp-script.sh
+	echo "ftp -i -n $_ftp_server_ip << \__end_commands" >> \
+	    /tmp/ftp-script.sh
+	echo "user $_ftp_server_login $_ftp_server_password" >> \
+	    /tmp/ftp-script.sh
+	echo "bin" >> /tmp/ftp-script.sh
+	echo "cd $_ftp_server_dir" >> /tmp/ftp-script.sh
+
+	resp=""		# force one interation
+	while [ "X${resp}" != X"done" ]; do
+		echo -n "File? [done] "
+		getresp "done"
+		if [ "X${resp}" = X"done" ]; then
+			break
+		fi
+
+		_ftp_file=`echo ${resp} | awk '{print $1}'`
+		echo "get ${_ftp_file} |\"tar -zxvpf -\"" >> \
+		    /tmp/ftp-script.sh
+	done
+
+	echo "quit" >> /tmp/ftp-script.sh
+	echo "__end_commands" >> /tmp/ftp-script.sh
+
+	sh /tmp/ftp-script.sh
+	rm -f /tmp/ftp-script.sh
+	echo "Extraction complete."
+}
+
+install_common_nfs_cdrom() {
+	# $1 - directory containing file
+
+	# Get the name of the file.
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "File name? "
+		getresp ""
+	done
+	_common_filename="/mnt2/$1/$resp"
+
+	# Ensure file exists
+	if [ ! -f $_common_filename ]; then
+		echo "File $_common_filename does not exist.  Check to make"
+		echo "sure you entered the information properly."
+		return
+	fi
+
+	# Extract file
+	cat $_common_filename | (cd /mnt; tar -zxvpf -)
+	echo "Extraction complete."
+}
+
+install_cdrom() {
+	# Get the cdrom device info
+	cat << \__install_cdrom_1
+
+The following SCSI disk or disk-like devices are installed on your system;
+please select the CD-ROM device containing the installation media:
+
+__install_cdrom_1
+	dmesg | grep "^sd" | grep "rev"
+	echo	""
+	echo -n	"Which is the CD-ROM with the installation media? [abort] "
+	getresp "abort"
+	case "$resp" in
+		abort)
+			echo "Aborting."
+			return
+			;;
+
+		*)
+			if dmesg | grep "^$resp " | grep "slave" \
+			    > /dev/null ; then
+				_cdrom_drive=$resp
+			else
+				echo ""
+				echo "The CD-ROM $resp does not exist."
+				echo "Aborting."
+				return
+			fi
+			;;
+	esac
+
+	# Get partition
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Partition? [c] "
+		getresp "c"
+		case "$resp" in
+			[a-h])
+				_cdrom_partition=$resp
+				;;
+
+			*)
+				echo "Invalid response: $resp"
+				resp=""		# force loop to repeat
+				;;
+		esac
+	done
+
+	# Ask for filesystem type
+	cat << \__install_cdrom_2
+
+There are two CD-ROM filesystem types currently supported by this program:
+	1) ISO-9660 (cd9660)
+	2) Berkeley Fast Filesystem (ffs)
+
+__install_cdrom_2
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Which filesystem type? [cd9660] "
+		getresp "cd9660"
+		case "$resp" in
+			cd9660|ffs)
+				_cdrom_filesystem=$resp
+				;;
+
+			*)
+				echo "Invalid response: $resp"
+				resp=""		# force loop to repeat
+				;;
+		esac
+	done
+
+	# Mount the CD-ROM
+	if ! mount -t ${_cdrom_filesystem} -o ro \
+	    /dev/${_cdrom_drive}${_cdrom_partition} /mnt2 ; then
+		echo "Cannot mount CD-ROM drive.  Aborting."
+		return
+	fi
+
+	# Get the directory where the file lives
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo "Enter the directory relative to the mount point that"
+		echo -n "contains the file. [${_cdrom_directory}] "
+		getresp "${_cdrom_directory}"
+	done
+	_cdrom_directory=$resp
+
+	install_common_nfs_cdrom ${_cdrom_directory}
+	umount -f /mnt2 > /dev/null 2>&1
+}
+
+install_nfs() {
+	# Get the IP address of the server
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Server IP address? [${_nfs_server_ip}] "
+		getresp "${_nfs_server_ip}"
+	done
+	_nfs_server_ip=$resp
+
+	# Get server path to mount
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Filesystem on server to mount? [${_nfs_server_path}] "
+		getresp "${_nfs_server_path}"
+	done
+	_nfs_server_path=$resp
+
+	# Determine use of TCP
+	echo -n "Use TCP transport (only works with capable NFS server)? [n] "
+	getresp "n"
+	case "$resp" in
+		y*|Y*)
+			_nfs_tcp="-T"
+			;;
+
+		*)
+			_nfs_tcp=""
+			;;
+	esac
+
+	# Mount the server
+	if ! mount_nfs $_nfs_tcp ${_nfs_server_ip}:${_nfs_server_path} \
+	    /mnt2 ; then
+		echo "Cannot mount NFS server.  Aborting."
+		return
+	fi
+
+	# Get the directory where the file lives
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo "Enter the directory relative to the mount point that"
+		echo -n "contains the file. [${_nfs_directory}] "
+		getresp "${_nfs_directory}"
+	done
+	_nfs_directory=$resp
+
+	install_common_nfs_cdrom ${_nfs_directory}
+	umount -f /mnt2 > /dev/null 2>&1
+}
+
+install_tape() {
+	# Get the name of the tape from the user.
+	cat << \__install_tape_1
+
+The installation program needs to know which tape device to use.  Make
+sure you use a "no rewind on close" device.
+
+__install_tape_1
+	_tape=`basename $TAPE`
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Name of tape device? [${_tape}]"
+		getresp "${_tape}"
+	done
+	_tape=`basename $resp`
+	TAPE="/dev/${_tape}"
+	if [ ! -c $TAPE ]; then
+		echo "$TAPE does not exist or is not a character special file."
+		echo "Aborting."
+		return
+	fi
+	export TAPE
+
+	# Rewind the tape device
+	echo -n "Rewinding tape..."
+	if ! mt rewind ; then
+		echo "$TAPE may not be attached to the system or may not be"
+		echo "a tape device.  Aborting."
+		return
+	fi
+	echo "done."
+
+	# Get the file number
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "File number? "
+		getresp ""
+		case "$resp" in
+			[1-9]*)
+				_nskip=`expr $resp - 1`
+				;;
+
+			*)
+				echo "Invalid file number ${resp}."
+				resp=""		# fore loop to repeat
+				;;
+		esac
+	done
+
+	# Skip to correct file.
+	echo -n "Skipping to source file..."
+	if [ "X${_nskip}" != X"0" ]; then
+		if ! mt fsf $_nskip ; then
+			echo "Could not skip $_nskip files.  Aborting."
+			return
+		fi
+	fi
+	echo "done."
+
+	cat << \__install_tape_2
+
+There are 2 different ways the file can be stored on tape:
+
+	1) an image of a gzipped tar file
+	2) a standard tar image
+
+__install_tape_2
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		getresp "1"
+		case "$resp" in
+			1)
+				(
+					cd /mnt
+					dd if=$TAPE | tar -zxvpf -
+				)
+				;;
+
+			2)
+				(
+					cd /mnt
+					tar -zxvpf $TAPE
+				)
+				;;
+
+			*)
+				echo "Invalid response: $resp."
+				resp=""		# force loop to repeat
+				;;
+		esac
+	done
+	echo "Extraction complete."
+}
+
+echo	""
+echo	"Welcome to the NetBSD ${VERSION} installation program."
+cat << \__welcome_banner_1
+
+This program is designed to help you put NetBSD on your hard disk,
+in a simple and rational way.  You'll be asked several questions,
+and it would probably be useful to have your disk's hardware
+manual, the installation notes, and a calculator handy.
+
+In particular, you will need to know some reasonably detailed
+information about your disk's geometry.  This program can determine
+some limited information about certain specific types of HP-IB disks.
+If you have SCSI disks, however, prior knowledge of disk geometry
+is absolutely essential.
+
+As with anything which modifies your hard disk's contents, this
+program can cause SIGNIFICANT data loss, and you are advised
+to make sure your hard drive is backed up before beginning the
+installation process.
+
+Default answers are displyed in brackets after the questions.
+You can hit Control-C at any time to quit, but if you do so at a
+prompt, you may have to hit return.  Also, quitting in the middle of
+installation may leave your system in an inconsistent state.
+
+__welcome_banner_1
+echo -n "Proceed with installation? [n] "
+getresp "n"
+case "$resp" in
+	y*|Y*)
+		echo	"Cool!  Let's get to it..."
+		;;
+	*)
+		cat << \__welcome_banner_2
+
+OK, then.  Enter 'halt' at the prompt to halt the machine.  Once the
+machine has halted, power-cycle the system to load new boot code.
+
+__welcome_banner_2
+		exit
+		;;
+esac
+
+# We don't like it, but it sure makes a few things a lot easier.
+do_mfs_mount "/tmp"
+
+# Install the shadowed disktab file; lets us write to it for temporary
+# purposes without mounting the miniroot read-write.
+cp /etc/disktab.shadow /tmp/disktab.shadow
+
+while [ "X${ROOTDISK}" = "X" ]; do
+	getrootdisk
+done
+
+# Make sure there's a disklabel there.  If there isn't, puke after
+# disklabel prints the error message.
+checkfordisklabel ${ROOTDISK}
+case $rval in
+	1)
+		cat << \__disklabel_not_present_1
+
+FATAL ERROR: There is no disklabel present on the root disk!  You must
+label the disk with SYS_INST before continuing.
+
+__disklabel_not_present_1
+		exit
+		;;
+
+	2)
+		cat << \__disklabel_corrupted_1
+
+FATAL ERROR: The disklabel on the root disk is corrupted!  You must
+re-label the disk with SYS_INST before continuing.
+
+__disklabel_corrupted_1
+		exit
+		;;
+
+	*)
+		;;
+esac
+
+# Give the user the opportinuty to edit the root disklabel.
+cat << \__disklabel_notice_1
+
+You have already placed a disklabel onto the target root disk.
+However, due to the limitations of the standalone program used
+you may want to edit that label to change partition type information.
+You will be given the opporunity to do that now.  Note that you may
+not change the size or location of any presently open partition.
+
+__disklabel_notice_1
+echo -n	"Do you wish to edit the root disklabel? [y] "
+getresp "y"
+case "$resp" in
+	y*|Y*)
+		disklabel -W ${ROOTDISK}
+		disklabel -e ${ROOTDISK}
+		;;
+
+	*)
+		;;
+esac
+
+cat << \__disklabel_notice_2
+
+You will now be given the opportunity to place disklabels on any additional
+disks on your system.
+__disklabel_notice_2
+
+resp="X"	# force at least one iteration
+while [ "X$resp" != X"done" ]; do
+	labelmoredisks
+done
+
+# Assume partition 'a' of $ROOTDISK is for the root filesystem.  Loop and
+# get the rest.
+# XXX ASSUMES THAT THE USER DOESN'T PROVIDE BOGUS INPUT.
+cat << \__get_filesystems_1
+
+You will now have the opportunity to enter filesystem information.
+You will be prompted for device name and mount point (full path,
+including the prepending '/' character).
+
+Note that these do not have to be in any particular order.  You will
+be given the opportunity to edit the resulting 'fstab' file before
+any of the filesystems are mounted.  At that time you will be able
+to resolve any filesystem order dependencies.
+
+__get_filesystems_1
+
+echo	"The following will be used for the root filesystem:"
+echo	"	${ROOTDISK}a	/"
+
+echo	"${ROOTDISK}a	/" > ${FILESYSTEMS}
+
+resp="X"	# force at least one iteration
+while [ "X$resp" != X"done" ]; do
+	echo	""
+	echo -n	"Device name? [done] "
+	getresp "done"
+	case "$resp" in
+		done)
+			;;
+
+		*)
+			_device_name=`basename $resp`
+
+			# force at least one iteration
+			_first_char="X"
+			while [ "X${_first_char}" != X"/" ]; do
+				echo -n "Mount point? "
+				getresp ""
+				_mount_point=$resp
+				if [ "X${_mount_point}" = X"/" ]; then
+					# Invalid response; no multiple roots
+					_first_char="X"
+				else
+					_first_char=`echo ${_mount_point} | \
+					    cut -c 1`
+				fi
+			done
+			echo "${_device_name}	${_mount_point}" >> \
+			    ${FILESYSTEMS}
+			resp="X"	# force loop to repeat
+			;;
+	esac
+done
+
+echo	""
+echo	"You have configured the following devices and mount points:"
+echo	""
+cat ${FILESYSTEMS}
+echo	""
+echo	"Filesystems will now be created on these devices.  If you made any"
+echo -n	"mistakes, you may edit this now.  Edit? [n] "
+getresp "n"
+case "$resp" in
+	y*|Y*)
+		vi ${FILESYSTEMS}
+		;;
+	*)
+		;;
+esac
+
+# Loop though the file, place filesystems on each device.
+echo	"Creating filesystems..."
+(
+	while read line; do
+		_device_name=`echo $line | awk '{print $1}'`
+		newfs /dev/r${_device_name}
+		echo ""
+	done
+) < ${FILESYSTEMS}
+
+# Get network configuration information, and store it for placement in the
+# root filesystem later.
+cat << \__network_config_1
+You will now be given the opportunity to configure the network.  This will
+be useful if you need to transfer the installation sets via FTP or NFS.
+Even if you choose not to transfer installation sets that way, this
+information will be preserved and copied into the new root filesystem.
+
+Note, enter all symbolic host names WITHOUT the domain name appended.
+I.e. use 'hostname' NOT 'hostname.domain.name'.
+
+__network_config_1
+echo -n	"Configure the network? [y] "
+getresp "y"
+case "$resp" in
+	y*|Y*)
+		echo -n "Enter system hostname: "
+		resp=""		# force at least one iteration
+		while [ "X${resp}" = X"" ]; do
+			getresp ""
+		done
+		hostname $resp
+		echo $resp > /tmp/myname
+
+		echo -n "Enter DNS domain name: "
+		resp=""		# force at least one iteration
+		while [ "X${resp}" = X"" ]; do
+			getresp ""
+		done
+		FQDN=$resp
+
+		resp=""		# force at least one iteration
+		while [ "X${resp}" != X"done" ]; do
+			configurenetwork
+		done
+
+		echo -n "Enter IP address of default route: [none] "
+		getresp "none"
+		if [ "X${resp}" != X"none" ]; then
+			route delete default > /dev/null 2>&1
+			if route add default $resp > /dev/null ; then
+				echo $resp > /tmp/mygate
+			fi
+		fi
+
+		echo ""
+		echo "The host table is as follows:"
+		echo ""
+		cat /tmp/hosts
+		echo ""
+		echo "You may want to edit the host table in the event that"
+		echo "you need to mount an NFS server."
+		echo -n "Would you like to edit the host table? [n] "
+		getresp "n"
+		case "$resp" in
+			y*|Y*)
+				vi /tmp/hosts
+				;;
+
+			*)
+				;;
+		esac
+
+		cat << \__network_config_2
+
+You will now be given the opportunity to escape to the command shell to
+do any additional network configuration you may need.  This may include
+adding additional routes, if needed.  In addition, you might take this
+opportunity to redo the default route in the event that it failed above.
+If you do change the default route, and wish for that change to carry over
+to the installed system, execute the following command at the shell
+prompt:
+
+	echo <ip_address_of_gateway> > /tmp/mygate
+
+where <ip_address_of_gateway> is the IP address of the default router.
+
+__network_config_2
+		echo -n "Escape to shell? [n] "
+		getresp "n"
+		case "$resp" in
+			y*|Y*)
+				echo "Type 'exit' to return to install."
+				sh
+				;;
+
+			*)
+				;;
+		esac
+		;;
+	*)
+		;;
+esac
+
+# Now that the network has been configured, it is safe to configure the
+# fstab.
+awk '{
+	if ($2 == "/")
+		printf("/dev/%s %s ffs rw 1 1\n", $1, $2)
+	else
+		printf("/dev/%s %s ffs rw 1 2\n", $1, $2)
+}' < ${FILESYSTEMS} > /tmp/fstab
+
+echo	"The fstab is configured as follows:"
+echo	""
+cat /tmp/fstab
+cat << \__fstab_config_1
+
+You may wish to edit the fstab.  For example, you may need to resolve
+dependencies in the order which the filesystems are mounted.  You may
+also wish to take this opportunity to place NFS mounts in the fstab.
+This would be especially useful if you plan to keep '/usr' on an NFS
+server.
+
+__fstab_config_1
+echo -n	"Edit the fstab? [n] "
+getresp "n"
+case "$resp" in
+	y*|Y*)
+		vi /tmp/fstab
+		;;
+
+	*)
+		;;
+esac
+
+# Now that the 'real' fstab is configured, we munge it into a 'shadow'
+# fstab which we'll use for mounting and unmounting all of the target
+# filesystems relative to /mnt.  Mount all filesystems.
+awk '{
+	if ($2 == "/")
+		printf("%s /mnt %s %s %s %s\n", $1, $3, $4, $5, $6)
+	else
+		printf("%s /mnt%s %s %s %s %s\n", $1, $2, $3, $4, $5, $6)
+}' < /tmp/fstab > /tmp/fstab.shadow
+
+echo	""
+
+# Must mount filesystems manually, one at a time, so we can make sure the
+# mount points exist.
+(
+	while read line; do
+		_dev=`echo $line | awk '{print $1}'`
+		_mp=`echo $line | awk '{print $2}'`
+		_fstype=`echo $line | awk '{print $3}'`
+		_opt=`echo $line | awk '{print $4}'`
+
+		# If not the root filesystem, make sure the mount
+		# point is present.
+		if [ "X{$_mp}" != X"/mnt" ]; then
+			mkdir -p $_mp
+		fi
+
+		# Mount the filesystem.  If the mount fails, exit
+		# with an error condition to tell the outer
+		# later to bail.
+		if ! mount -v -t $_fstype -o $_opt $_dev $_mp ; then
+			# error message displated by mount
+			exit 1
+		fi
+	done
+) < /etc/fstab
+
+if [ "X${?}" != X"0" ]; then
+	cat << \__mount_filesystems_1
+
+FATAL ERROR:  Cannot mount filesystems.  Double-check your configuration
+and restart the installation process.
+
+__mount_filesystems_1
+	exit
+fi
+
+# Ask the user which media to load the distribution from.
+cat << \__install_sets_1
+
+It is now time to extract the installation sets onto the hard disk.
+Make sure The sets are either on a local device (i.e. tape, CD-ROM) or on a
+network server.
+
+__install_sets_1
+resp=""		# force at least one iteration
+while [ "X${resp}" = X"" ]; do
+	echo -n	"Install from (f)tp, (t)ape, (C)D-ROM, or (N)FS? [f] "
+	getresp "f"
+	case "$resp" in
+		f*|F*)
+			install_ftp
+			;;
+
+		t*|T*)
+			install_tape
+			;;
+
+		c*|C*)
+			install_cdrom
+			;;
+
+		n*|N*)
+			install_nfs
+			;;
+
+		*)
+			echo "Invalid response: $resp"
+			resp=""
+			;;
+	esac
+
+	# Give the user the opportunity to extract more sets.  They don't
+	# necessarily have to come from the same media.
+	echo	""
+	echo -n	"Extract more sets? [n] "
+	getresp "n"
+	case "$resp" in
+		y*|Y*)
+			# Force loop to repeat
+			resp=""
+			;;
+
+		*)
+			;;
+	esac
+done
+
+# Copy in configuration information and make devices in target root.
+(
+	cd /tmp
+	for file in fstab hostname.* hosts myname mygate; do
+		if [ -f $file ]; then
+			echo "Copying $file..."
+			cp $file /mnt/etc/$file
+		fi
+	done
+
+	echo -n "Making devices..."
+	cd /mnt/dev
+	sh MAKEDEV all
+	echo "done."
+
+	echo "Copying kernel..."
+	cp /netbsd /mnt/netbsd
+)
+
+# Unmount all filesystems and check their integrity.
+umount -a
+echo "Checking filesystem integrity..."
+fsck -pf
+
+# Install boot code on target disk.
+echo "Installing boot block..."
+disklabel -W ${ROOTDISK}
+disklabel -B ${ROOTDISK}
+
+cat << \__congratulations_1
+
+CONGRATULATIONS!  You have successfully installed NetBSD on your hard disk!
+To boot the installed system, enter halt at the command prompt.  Once the
+system has halted, power-cycle the machine in order to load new boot code.
+Make sure you boot from the disk.
+
+__congratulations_1
+
+# ALL DONE!
+exit
diff --git a/distrib/hp300/miniroot/inst/list b/distrib/hp300/miniroot/inst/list
new file mode 100644
index 00000000000..64c1df1c037
--- /dev/null
+++ b/distrib/hp300/miniroot/inst/list
@@ -0,0 +1,9 @@
+#	$NetBSD: list,v 1.1 1995/10/03 22:48:01 thorpej Exp $
+
+# copy the kernel
+COPY	${CURDIR}/../../../../sys/arch/hp300/compile/GENERIC/netbsd	netbsd
+
+# and the installation tools
+COPY	dot.profile			.profile
+COPY	install.sh			install
+SPECIAL	chmod 755 install
diff --git a/distrib/hp300/miniroot/list2sh.awk b/distrib/hp300/miniroot/list2sh.awk
new file mode 100644
index 00000000000..ba43187059d
--- /dev/null
+++ b/distrib/hp300/miniroot/list2sh.awk
@@ -0,0 +1,55 @@
+#	$NetBSD: list2sh.awk,v 1.1 1995/10/03 22:47:56 thorpej Exp $
+
+BEGIN {
+	printf("cd ${CURDIR}\n");
+	printf("\n");
+}
+/^$/ || /^#/ {
+	print $0;
+	next;
+}
+$1 == "COPY" {
+	printf("echo '%s'\n", $0);
+	printf("rm -f ${TARGDIR}/%s\n", $3);
+	printf("cp %s ${TARGDIR}/%s\n", $2, $3);
+	next;
+}
+$1 == "LINK" {
+	printf("echo '%s'\n", $0);
+	printf("rm -f ${TARGDIR}/%s\n", $3);
+	printf("(cd ${TARGDIR}; ln %s %s)\n", $2, $3);
+	next;
+}
+$1 == "SYMLINK" {
+	printf("echo '%s'\n", $0);
+	printf("rm -f ${TARGDIR}/%s\n", $3);
+	printf("(cd ${TARGDIR}; ln -s %s %s)\n", $2, $3);
+	next;
+}
+$1 == "COPYDIR" {
+	printf("echo '%s'\n", $0);
+	printf("(cd ${TARGDIR}/%s && find . ! -name . | xargs /bin/rm -rf)\n",
+	    $3);
+	printf("(cd %s && find . ! -name . | cpio -pdamu ${TARGDIR}/%s)\n", $2,
+	    $3);
+	next;
+}
+$1 == "SPECIAL" {
+	printf("echo '%s'\n", $0);
+	printf("(cd ${TARGDIR};");
+	for (i = 2; i <= NF; i++)
+		printf(" %s", $i);
+	printf(")\n");
+	next;
+}
+{
+	printf("echo '%s'\n", $0);
+	printf("echo 'Unknown keyword \"%s\" at line %d of input.'\n", $1, NR);
+	printf("exit 1\n");
+	exit 1;
+}
+END {
+	printf("\n");
+	printf("exit 0\n");
+	exit 0;
+}
diff --git a/distrib/hp300/miniroot/runlist.sh b/distrib/hp300/miniroot/runlist.sh
new file mode 100644
index 00000000000..96abe1f2e23
--- /dev/null
+++ b/distrib/hp300/miniroot/runlist.sh
@@ -0,0 +1,13 @@
+#	$NetBSD: runlist.sh,v 1.1 1995/10/03 22:47:57 thorpej Exp $
+
+if [ "X$1" = "X-d" ]; then
+	SHELLCMD=cat
+	shift
+else
+	SHELLCMD="sh -e"
+fi
+
+( while [ "X$1" != "X" ]; do
+	cat $1
+	shift
+done ) | awk -f ${TOPDIR}/list2sh.awk | ${SHELLCMD}