Prelimary addition of the ramdisk-based miniroot. Still needs work.

(Stolen wholesale from mvme68k.)

The miniroot subdir is obsolete, and subject to removal.

13 files changed, 2589 insertions, 0 deletions

diff --git a/distrib/hp300/ramdisk/Makefile b/distrib/hp300/ramdisk/Makefile
new file mode 100644
index 00000000000..681081cbb27
--- /dev/null
+++ b/distrib/hp300/ramdisk/Makefile
@@ -0,0 +1,77 @@
+#	$OpenBSD: Makefile,v 1.1 1997/02/16 18:20:00 downsj Exp $
+#	$NetBSD: Makefile,v 1.1 1995/07/18 04:13:06 briggs Exp $
+
+TOP=		${.CURDIR}/..
+
+.include "${TOP}/Makefile.inc"
+IMAGE=		miniroot-${REV}.fs
+CRUNCHCONF?=    ${.CURDIR}/${CBIN}.conf
+BASE=miniroot
+
+MOUNT_POINT=	/mnt1
+BDEV=		/dev/rd0a
+CDEV=		/dev/rrd0a
+RDEV=		/dev/rd0c
+
+KERNEL=		${SRCSYSDIR}/arch/hp300/compile/MINIROOT/bsd
+
+all: ${CBIN} ${IMAGE}
+	@echo "all done"
+
+.include "Makefile.inc"
+
+DISKTYPE=       rdroot
+NBLKS=          4096
+# old format, minfree, opt, b/i  trks, sects, cpg
+#NEWFSARGS= -t ffs -m 0 -o space -u 32 -c 16
+
+${IMAGE}:	do_prep do_mount do_files do_umount_copy do_unconfig
+	mv -f ${IMAGE}.tmp ${IMAGE}
+	if [ -e rd.pid ] ; then \
+	kill `< rd.pid`; \
+	rm rd.pid;\
+	fi
+
+rdsetroot:	${TOP}/common/rdsetroot.c
+	${HOSTCC} -o rdsetroot ${TOP}/common/rdsetroot.c
+
+setroot: ${IMAGE} bsd 
+	${.CURDIR}/${__objdir}/rdsetroot bsd < ${IMAGE}
+
+bsd:	${KERNEL}
+	cp ${KERNEL} bsd
+
+writetape:
+	echo rewinding tape < /dev/rst0
+	buffer -i /usr/mdec/stboot -o /dev/nrst0
+	buffer -i /usr/mdec/bootst -o /dev/nrst0
+	buffer -B -p75 -i bsd -o /dev/nrst0
+	echo rewinding tape < /dev/rst0
+
+
+do_prep: ${CBIN} do_unconfig
+	sh ${.CURDIR}/start_rdconfig.sh ${RDEV} ${NBLKS}
+	disklabel -w -r ${RDEV} ${DISKTYPE}
+	
+do_mount:
+	-newfs ${NEWFSARGS} -s ${NBLKS} ${CDEV} ${DISKTYPE}
+	mount ${BDEV} ${MOUNT_POINT}
+ 
+do_umount_copy:
+	@echo ""
+	@df -i ${MOUNT_POINT}
+	@echo ""
+	-umount ${MOUNT_POINT}
+	dd if=${CDEV} of=${IMAGE}.tmp bs=4b count=`expr ${NBLKS} / 4 `
+
+do_unconfig:
+	-umount ${MOUNT_POINT}
+	if [ -e rd.pid ] ; then \
+	kill `< rd.pid`; \
+	rm rd.pid; \
+	fi
+
+
+.PRECIOUS:	${IMAGE}
+
+
diff --git a/distrib/hp300/ramdisk/Makefile.inc b/distrib/hp300/ramdisk/Makefile.inc
new file mode 100644
index 00000000000..c7eb7ca3d0c
--- /dev/null
+++ b/distrib/hp300/ramdisk/Makefile.inc
@@ -0,0 +1,32 @@
+#
+#	$OpenBSD: Makefile.inc,v 1.1 1997/02/16 18:20:01 downsj Exp $
+#	$NetBSD: Makefile.inc,v 1.1 1995/07/18 04:13:14 briggs Exp $
+#
+
+# TOP is assumed to be defined by Makefile including this one.
+
+CBIN?=		raminst
+COMMONDIR=	${TOP}/ramdisk
+
+MOUNT_POINT?=	${TOP}/${BASE}/fs
+
+LISTS=		${.CURDIR}/list
+CRUNCHCONF?=	${COMMONDIR}/${CBIN}.conf
+MTREE=		${COMMONDIR}/mtree.conf
+
+${CBIN}.mk ${CBIN}.cache ${CBIN}.c: ${CRUNCHCONF}
+	crunchgen -D ${BSDSRCDIR} -L ${DESTDIR}/usr/lib ${CRUNCHCONF}
+
+${CBIN}: ${CBIN}.mk ${CBIN}.cache ${CBIN}.c
+	make -f ${CBIN}.mk all
+
+do_files:
+	mtree -def ${MTREE} -p ${MOUNT_POINT}/ -u
+	TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \
+	    TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${LISTS}
+
+clean cleandir:
+	/bin/rm -f core ${IMAGE} ${CBIN} ${CBIN}.mk ${CBIN}.cache *.o *.lo *.c
+
+.include <bsd.obj.mk>
+.include <bsd.subdir.mk>
diff --git a/distrib/hp300/ramdisk/disktab.preinstall b/distrib/hp300/ramdisk/disktab.preinstall
new file mode 100644
index 00000000000..82d1ab709f0
--- /dev/null
+++ b/distrib/hp300/ramdisk/disktab.preinstall
@@ -0,0 +1,33 @@
+#
+#	$OpenBSD: disktab.preinstall,v 1.1 1997/02/16 18:20:01 downsj Exp $
+#	$NetBSD: disktab.preinstall,v 1.1 1995/07/18 04:13:07 briggs Exp $
+#
+# Disk geometry and partition layout tables. 
+# Key:
+#	dt	controller type
+#	ty	type of disk (fixed, removeable, simulated)
+#	d[0-4]	drive-type-dependent parameters
+#	ns	#sectors/track
+#	nt	#tracks/cylinder
+#	nc	#cylinders/disk
+#	sc	#sectors/cylinder, nc*nt default
+#	su	#sectors/unit, sc*nc default
+#	se	sector size, DEV_BSIZE default
+#	rm	rpm, 3600 default
+#	sf	supports bad144-style bad sector forwarding
+#	sk	sector skew per track, default 0
+#	cs	sector skew per cylinder, default 0
+#	hs	headswitch time, default 0
+#	ts	one-cylinder seek time, default 0
+#	il	sector interleave (n:1), 1 default
+#	bs	boot block size, default BBSIZE
+#	sb	superblock size, default SBSIZE
+#	o[a-h]	partition offsets in sectors
+#	p[a-h]	partition sizes in sectors
+#	b[a-h]	partition block sizes in bytes
+#	f[a-h]	partition fragment sizes in bytes
+#	t[a-h]	partition types (filesystem, swap, etc)
+#
+# All partition sizes reserve space for bad sector tables.
+# (5 cylinders needed for maintenance + replacement sectors)
+#
diff --git a/distrib/hp300/ramdisk/disktab.shadow b/distrib/hp300/ramdisk/disktab.shadow
new file mode 100644
index 00000000000..696963b7d79
--- /dev/null
+++ b/distrib/hp300/ramdisk/disktab.shadow
@@ -0,0 +1,33 @@
+#
+#	$OpenBSD: disktab.shadow,v 1.1 1997/02/16 18:20:02 downsj Exp $
+#	$NetBSD: disktab.shadow,v 1.1.1.1 1996/05/19 19:43:39 leo Exp $
+#
+# Disk geometry and partition layout tables. 
+# Key:
+#	dt	controller type
+#	ty	type of disk (fixed, removeable, simulated)
+#	d[0-4]	drive-type-dependent parameters
+#	ns	#sectors/track
+#	nt	#tracks/cylinder
+#	nc	#cylinders/disk
+#	sc	#sectors/cylinder, nc*nt default
+#	su	#sectors/unit, sc*nc default
+#	se	sector size, DEV_BSIZE default
+#	rm	rpm, 3600 default
+#	sf	supports bad144-style bad sector forwarding
+#	sk	sector skew per track, default 0
+#	cs	sector skew per cylinder, default 0
+#	hs	headswitch time, default 0
+#	ts	one-cylinder seek time, default 0
+#	il	sector interleave (n:1), 1 default
+#	bs	boot block size, default BBSIZE
+#	sb	superblock size, default SBSIZE
+#	o[a-h]	partition offsets in sectors
+#	p[a-h]	partition sizes in sectors
+#	b[a-h]	partition block sizes in bytes
+#	f[a-h]	partition fragment sizes in bytes
+#	t[a-h]	partition types (filesystem, swap, etc)
+#
+# All partition sizes reserve space for bad sector tables.
+# (5 cylinders needed for maintenance + replacement sectors)
+#
diff --git a/distrib/hp300/ramdisk/dot.instutils b/distrib/hp300/ramdisk/dot.instutils
new file mode 100644
index 00000000000..8f4fddc2dd7
--- /dev/null
+++ b/distrib/hp300/ramdisk/dot.instutils
@@ -0,0 +1,157 @@
+#
+#	$OpenBSD: dot.instutils,v 1.1 1997/02/16 18:20:02 downsj Exp $
+#	$NetBSD: dot.instutils,v 1.1 1995/07/18 04:13:08 briggs Exp $
+#
+# Copyright (c) 1994 Christopher G. Demetriou
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed by Christopher G. Demetriou.
+# 4. The name of the author may not be used to endorse or promote products
+#    derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+# Installation configuration utilites (functions), to get NetBSD configured
+# reasonably once it is installed on the hard disk.  These are meant to be
+# invoked from the shell prompt, by people installing NetBSD.
+
+Configure()
+{
+	DEV=/mnt/dev
+	ETC=/mnt/etc
+
+	echo	"You will now be prompted for information about this"
+	echo	"machine.  If you hit return, the default answer (in"
+	echo	"brackets) will be used."
+
+	echo	""
+	echo -n	"What is this machine's hostname? [unknown.host.domain] "
+	read hname
+	if [ "$hname" = "" ]; then
+		hname=unknown.host.domain
+	fi
+	echo $hname > ${ETC}/myname
+	proto_domain=`echo $hname | sed -e 's/[^.]*\.//'`
+
+	echo	""
+	echo	"What domain is this machine in (this is NOT its YP"
+	echo -n	"domain name)? [$proto_domain] "
+	read dname
+	if [ "$dname" = "" ]; then
+		dname=$proto_domain
+	fi
+
+	echo	""
+	if [ -e ${ETC}/sendmail.cf ]; then
+		echo	"WARNING: A default sendmail.cf exists, and probably"
+		echo	"needs to be tuned and/or replaced, to work properly at"
+		echo	"your site!"
+	else
+		echo	"WARNING: No default sendmail.cf installed.  Did you"
+		echo	"forget to install the 'etc' distribution?"
+	fi
+
+	echo	"127.0.0.1	localhost localhost.$dname" > ${ETC}/hosts
+
+	echo	""
+	echo -n	"Does this machine have an ethernet interface? [y] "
+        read resp
+        case "$resp" in
+	n*)
+		;;
+	*)
+		intf=
+		while [ "$intf" = "" ]; do
+			echo -n "What is the primary interface name "
+			echo -n "(e.g. ae0, etc)? "
+			read intf
+		done
+		echo -n "What is the hostname for this interface? [$hname] "
+		read ifname
+		if [ "$ifname" = "" ]; then
+			ifname=$hname
+		fi
+		ifaddr=
+		while [ "$ifaddr" = "" ]; do
+			echo -n "What is the IP address associated with "
+			echo -n "interface ${intf}? "
+			read ifaddr
+		done
+		echo "$ifaddr	$ifname `echo $ifname | sed -e s/\.$dname//`" \
+		    >> ${ETC}/hosts
+
+		echo -n "Does this interface have a special netmask? [n] "
+		read resp
+		case "$resp" in
+			y*)
+				echo -n "What is the netmask? [0xffffff00] "
+				read ifnetmask
+				if [ "$ifnetmask" = "" ]; then
+					ifnetmask=0xffffff00
+				fi
+				;;
+			*)
+				ifnetmask=
+				;;
+		esac
+
+		echo -n "Does this interface need additional flags? [n] "
+		read resp
+		case "$resp" in
+			y*)
+				echo -n "What flags? [link0] "
+				read ifflags
+				if [ "$ifflags" = "" ]; then
+					ifflags=link0
+				fi
+				;;
+			*)
+				ifflags=
+				;;
+		esac
+		echo "inet $ifname $ifnetmask $ifflags" > ${ETC}/hostname.$intf
+
+		echo    ""
+		echo -n	"WARNING: if you have any more ethernet interfaces, "
+		echo	"you will have to configure"
+		echo -n "them by hand.  Read the comments in /etc/netstart to"
+		echo	"learn how to do this."
+		;;
+	esac
+	
+	echo	""
+	echo -n	"Making device nodes..."
+	cd ${DEV}
+	sh MAKEDEV all
+	echo	" done."
+
+	sync
+
+	echo	"You may now reboot your machine with the shutdown command."
+	echo	"	shutdown -r now"
+	echo	"to reboot or"
+	echo	"	shutdown -h now"
+	echo	"to halt."
+	echo	"Remember to erase the miniroot name from the booter's"
+	echo	"booting preferences dialog box before booting again."
+}
diff --git a/distrib/hp300/ramdisk/dot.profile b/distrib/hp300/ramdisk/dot.profile
new file mode 100644
index 00000000000..4c5987b70ef
--- /dev/null
+++ b/distrib/hp300/ramdisk/dot.profile
@@ -0,0 +1,50 @@
+#
+#	$OpenBSD: dot.profile,v 1.1 1997/02/16 18:20:03 downsj Exp $
+#	$NetBSD: dot.profile,v 1.1 1995/07/18 04:13:09 briggs Exp $
+#
+# Copyright (c) 1994 Christopher G. Demetriou
+# All rights reserved.
+# 
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed by Christopher G. Demetriou.
+# 4. The name of the author may not be used to endorse or promote products
+#    derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+PATH=/sbin:/bin:/usr/bin:/usr/sbin:/
+export PATH
+TERM=vt200
+export TERM
+
+# set up some sane defaults
+echo 'erase ^?, werase ^H, kill ^U, intr ^C'
+stty newcrt werase ^H intr ^C kill ^U erase ^? 9600
+echo ''
+
+# pull in the function definitions that people will use from the shell prompt.
+. /.commonutils
+. /.instutils
+
+# run the installation script.
+umask 022
+install
diff --git a/distrib/hp300/ramdisk/install.md b/distrib/hp300/ramdisk/install.md
new file mode 100644
index 00000000000..10b6e98b8d2
--- /dev/null
+++ b/distrib/hp300/ramdisk/install.md
@@ -0,0 +1,266 @@
+#       $OpenBSD: install.md,v 1.1 1997/02/16 18:20:03 downsj Exp $
+#
+# Copyright (c) 1996 The NetBSD Foundation, Inc.
+# All rights reserved.
+#
+# This code is derived from software contributed to The NetBSD Foundation
+# by Jason R. Thorpe.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#        This product includes software developed by the NetBSD
+#        Foundation, Inc. and its contributors.
+# 4. Neither the name of The NetBSD Foundation nor the names of its
+#    contributors may be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+#
+# machine dependent section of installation/upgrade script.
+#
+#
+
+TMPWRITEABLE=/tmp/writeable
+KERNFSMOUNTED=/tmp/kernfsmounted
+
+md_copy_kernel() {
+	echo "This must be done later by hand"
+}
+
+md_set_term() {
+	if [ ! -z "$TERM" ]; then
+		return
+	fi
+	echo -n "Specify terminal type [xterm]: "
+	getresp "xterm"
+	TERM="$resp"
+	export TERM
+}
+
+md_get_diskdevs() {
+	egrep "^sd[0-9] " < /kern/msgbuf
+}
+
+md_get_cddevs() {
+	egrep "^cd[0-9] " < /kern/msgbuf
+}
+
+md_get_ifdevs() {                                                         
+        # return available network devices                               
+	egrep "(^ie[0-9] )|(^le[0-9] )"< /kern/msgbuf  | cut -d" " -f1 | sort -u
+}
+
+md_get_partition_range() {
+	# return range of valid partition letters
+	echo "[a-p]"
+}
+
+md_installboot() {
+	echo "Nothing to do."
+}
+md_labeldisk() {
+	echo "huh"
+}
+
+
+md_checkfordisklabel() {
+	# $1 is the disk to check
+	local rval
+
+	disklabel $1 >> /dev/null 2> /tmp/checkfordisklabel
+	if grep "no disk label" /tmp/checkfordisklabel; then
+		rval=1
+	elif grep "disk label corrupted" /tmp/checkfordisklabel; then
+		rval=2
+	else
+		rval=0
+	fi
+
+	rm -f /tmp/checkfordisklabel
+	return $rval
+}
+
+md_prep_disklabel()
+{
+	local _disk
+
+	_disk=$1
+	md_checkfordisklabel $_disk
+	case $? in
+	0)
+		echo -n "Do you wish to edit the disklabel on $_disk? [y] "
+		;;
+	1)
+		echo "WARNING: Disk $_disk has no label"
+		echo -n "Do you want to create one with the disklabel editor? [y] "
+		;;
+	2)
+		echo "WARNING: Label on disk $_disk is corrupted"
+		echo -n "Do you want to try and repair the damage using the disklabel editor? [y] "
+		;;
+	esac
+
+	getresp "y"
+	case "$resp" in
+	y*|Y*) ;;
+	*)	return ;;
+	esac
+
+	# display example
+	cat << \__md_prep_disklabel_1
+
+Here is an example of what the partition information will look like once
+you have entered the disklabel editor. Disk partition sizes and offsets
+are in sector (most likely 512 bytes) units. Make sure these size/offset
+pairs are on cylinder boundaries (the number of sector per cylinder is
+given in the `sectors/cylinder' entry, which is not shown here).
+
+Do not change any parameters except the partition layout and the label name.
+It's probably also wisest not to touch the `8 partitions:' line, even
+in case you have defined less than eight partitions.
+
+[Example]
+8 partitions:
+#        size   offset    fstype   [fsize bsize   cpg]
+  a:    50176        0    4.2BSD     1024  8192    16   # (Cyl.    0 - 111)
+  b:    64512    50176      swap                        # (Cyl.  112 - 255)
+  c:   640192        0   unknown                        # (Cyl.    0 - 1428)
+  d:   525504   114688    4.2BSD     1024  8192    16   # (Cyl.  256 - 1428)
+[End of example]
+
+__md_prep_disklabel_1
+	echo -n "Press [Enter] to continue "
+	getresp ""
+	disklabel -W ${_disk}
+	disklabel -e ${_disk}
+}
+
+md_welcome_banner() {
+{
+	if [ "$MODE" = "install" ]; then
+		echo ""
+		echo "Welcome to the OpenBSD/hp300 ${VERSION} installation program."
+		cat << \__welcome_banner_1
+
+This program is designed to help you put OpenBSD on your disk,
+in a simple and rational way.  You'll be asked several questions,
+and it would probably be useful to have your disk's hardware
+manual, the installation notes, and a calculator handy.
+__welcome_banner_1
+
+	else
+		echo ""
+		echo "Welcome to the OpenBSD/hp300 ${VERSION} upgrade program."
+		cat << \__welcome_banner_2
+
+This program is designed to help you upgrade your OpenBSD system in a
+simple and rational way.
+
+As a reminder, installing the `etc' binary set is NOT recommended.
+Once the rest of your system has been upgraded, you should manually
+merge any changes to files in the `etc' set into those files which
+already exist on your system.
+__welcome_banner_2
+	fi
+
+cat << \__welcome_banner_3
+
+As with anything which modifies your disk's contents, this
+program can cause SIGNIFICANT data loss, and you are advised
+to make sure your data is backed up before beginning the
+installation process.
+
+Default answers are displayed in brackets after the questions.
+You can hit Control-C at any time to quit, but if you do so at a
+prompt, you may have to hit return.  Also, quitting in the middle of
+installation may leave your system in an inconsistent state.
+
+__welcome_banner_3
+} | more
+}
+
+md_not_going_to_install() {
+	cat << \__not_going_to_install_1
+
+OK, then.  Enter `halt' at the prompt to halt the machine.  Once the
+machine has halted, power-cycle the system to load new boot code.
+
+__not_going_to_install_1
+}
+
+md_congrats() {
+	local what;
+	if [ "$MODE" = "install" ]; then
+		what="installed";
+	else
+		what="upgraded";
+	fi
+	cat << __congratulations_1
+
+CONGRATULATIONS!  You have successfully $what OpenBSD!
+To boot the installed system, enter halt at the command prompt. Once the
+system has halted, reset the machine and boot from the disk.
+
+__congratulations_1
+}
+
+md_native_fstype() {
+}
+
+md_makerootwritable() {
+
+	if [ -e ${TMPWRITEABLE} ]
+	then
+		md_mountkernfs
+		return
+	fi
+	umount /tmp >> /dev/null 2>&1
+	if ! mount -t ffs  -u /dev/rd0a / ; then
+		cat << \__rd0_failed_1
+
+FATAL ERROR: Can't mount the ram filesystem.
+
+__rd0_failed_1
+		exit
+	fi
+
+	# Bleh.  Give mount_mfs a chance to DTRT.
+	sleep 2
+	> ${TMPWRITEABLE}
+
+	md_mountkernfs
+}
+md_mountkernfs() {
+	if [ -e ${KERNFSMOUNTED} ]
+	then
+		return
+	fi
+	if ! mount -t kernfs /kern /kern
+	then
+		cat << \__kernfs_failed_1
+FATAL ERROR: Can't mount kernfs filesystem
+__kernfs_failed_1
+		exit
+	fi
+	> ${KERNFSMOUNTED} 
+}
diff --git a/distrib/hp300/ramdisk/install.sh b/distrib/hp300/ramdisk/install.sh
new file mode 100644
index 00000000000..f66aaa29bf5
--- /dev/null
+++ b/distrib/hp300/ramdisk/install.sh
@@ -0,0 +1,410 @@
+#!/bin/sh
+#	$OpenBSD: install.sh,v 1.1 1997/02/16 18:20:03 downsj Exp $
+#	$NetBSD: install.sh,v 1.5.2.8 1996/08/27 18:15:05 gwr Exp $
+#
+# Copyright (c) 1996 The NetBSD Foundation, Inc.
+# All rights reserved.
+#
+# This code is derived from software contributed to The NetBSD Foundation
+# by Jason R. Thorpe.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#        This product includes software developed by the NetBSD
+#        Foundation, Inc. and its contributors.
+# 4. Neither the name of The NetBSD Foundation nor the names of its
+#    contributors may be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+#	OpenBSD installation script.
+#	In a perfect world, this would be a nice C program, with a reasonable
+#	user interface.
+
+FILESYSTEMS="/tmp/filesystems"		# used thoughout
+FQDN=""					# domain name
+
+trap "umount /tmp >> /dev/null 2>&1" 0
+
+MODE="install"
+
+# include machine-dependent functions
+# The following functions must be provided:
+#	md_copy_kernel()	- copy a kernel to the installed disk
+#	md_get_diskdevs()	- return available disk devices
+#	md_get_cddevs()		- return available CD-ROM devices
+#	md_get_ifdevs()		- return available network interfaces
+#	md_get_partition_range() - return range of valid partition letters
+#	md_installboot()	- install boot-blocks on disk
+#	md_labeldisk()		- put label on a disk
+#	md_prep_disklabel()	- label the root disk
+#	md_welcome_banner()	- display friendly message
+#	md_not_going_to_install() - display friendly message
+#	md_congrats()		- display friendly message
+#	md_native_fstype()	- native filesystem type for disk installs
+#	md_native_fsopts()	- native filesystem options for disk installs
+#	md_makerootwritable()	- make root writable (at least /tmp)
+
+# include machine dependent subroutines
+. install.md
+
+# include common subroutines
+. install.sub
+
+# which sets?
+THESETS="$ALLSETS"
+
+# Good {morning,afternoon,evening,night}.
+md_welcome_banner
+echo -n "Proceed with installation? [n] "
+getresp "n"
+case "$resp" in
+	y*|Y*)
+		echo	"Cool!  Let's get to it..."
+		;;
+	*)
+		md_not_going_to_install
+		exit
+		;;
+esac
+
+# XXX Work around vnode aliasing bug (thanks for the tip, Chris...)
+ls -l /dev >> /dev/null 2>&1
+
+# Deal with terminal issues
+md_set_term
+
+# Get timezone info
+get_timezone
+
+# Make sure we can write files (at least in /tmp)
+# This might make an MFS mount on /tmp, or it may
+# just re-mount the root with read-write enabled.
+md_makerootwritable
+
+# Install the shadowed disktab file; lets us write to it for temporary
+# purposes without mounting the miniroot read-write.
+cp /etc/disktab.shadow /tmp/disktab.shadow
+
+while [ "X${ROOTDISK}" = "X" ]; do
+	getrootdisk
+done
+
+# Deal with disklabels, including editing the root disklabel
+# and labeling additional disks.  This is machine-dependent since
+# some platforms may not be able to provide this functionality.
+md_prep_disklabel ${ROOTDISK}
+
+# Assume partition 'a' of $ROOTDISK is for the root filesystem.  Loop and
+# get the rest.
+# XXX ASSUMES THAT THE USER DOESN'T PROVIDE BOGUS INPUT.
+cat << \__get_filesystems_1
+
+You will now have the opportunity to enter filesystem information.
+You will be prompted for device name and mount point (full path,
+including the prepending '/' character).
+
+Note that these do not have to be in any particular order.  You will
+be given the opportunity to edit the resulting 'fstab' file before
+any of the filesystems are mounted.  At that time you will be able
+to resolve any filesystem order dependencies.
+
+__get_filesystems_1
+
+echo	"The following will be used for the root filesystem:"
+echo	"	${ROOTDISK}a	/"
+
+echo	"${ROOTDISK}a	/" > ${FILESYSTEMS}
+
+resp="X"	# force at least one iteration
+while [ "X$resp" != X"done" ]; do
+	echo	""
+	echo -n	"Device name? [done] "
+	getresp "done"
+	case "$resp" in
+	done)
+		;;
+
+	*)
+		_device_name=`basename $resp`
+
+		# force at least one iteration
+		_first_char="X"
+		while [ "X${_first_char}" != X"/" ]; do
+			echo -n "Mount point? "
+			getresp ""
+			_mount_point=$resp
+			if [ "X${_mount_point}" = X"/" ]; then
+				# Invalid response; no multiple roots
+				_first_char="X"
+			else
+				_first_char=`firstchar ${_mount_point}`
+			fi
+		done
+		echo "${_device_name}	${_mount_point}" >> ${FILESYSTEMS}
+		resp="X"	# force loop to repeat
+		;;
+	esac
+done
+
+echo	""
+echo	"You have configured the following devices and mount points:"
+echo	""
+cat ${FILESYSTEMS}
+echo	""
+echo	"Filesystems will now be created on these devices.  If you made any"
+echo -n	"mistakes, you may edit this now.  Edit? [n] "
+getresp "n"
+case "$resp" in
+	y*|Y*)
+		${EDITOR} ${FILESYSTEMS}
+		;;
+	*)
+		;;
+esac
+
+# Loop though the file, place filesystems on each device.
+echo	"Creating filesystems..."
+(
+	while read _device_name _junk; do
+		newfs /dev/r${_device_name}
+		echo ""
+	done
+) < ${FILESYSTEMS}
+
+# Get network configuration information, and store it for placement in the
+# root filesystem later.
+cat << \__network_config_1
+You will now be given the opportunity to configure the network.  This will
+be useful if you need to transfer the installation sets via FTP or NFS.
+Even if you choose not to transfer installation sets that way, this
+information will be preserved and copied into the new root filesystem.
+
+Note, enter all symbolic host names WITHOUT the domain name appended.
+I.e. use 'hostname' NOT 'hostname.domain.name'.
+
+__network_config_1
+echo -n	"Configure the network? [y] "
+getresp "y"
+case "$resp" in
+	y*|Y*)
+		resp=""		# force at least one iteration
+		if [ -f /etc/myname ]; then
+			resp=`cat /etc/myname`
+		fi
+		echo -n "Enter system hostname: [$resp] "
+		while [ "X${resp}" = X"" ]; do
+			getresp "$resp"
+		done
+		hostname $resp
+		echo $resp > /tmp/myname
+
+		echo -n "Enter DNS domain name: "
+		resp=""		# force at least one iteration
+		while [ "X${resp}" = X"" ]; do
+			getresp ""
+		done
+		FQDN=$resp
+
+		configurenetwork
+
+		echo -n "Enter IP address of default route: [none] "
+		getresp "none"
+		if [ "X${resp}" != X"none" ]; then
+			route delete default >> /dev/null 2>&1
+			if route add default $resp >> /dev/null ; then
+				echo $resp > /tmp/mygate
+			fi
+		fi
+
+		echo -n	"Enter IP address of primary nameserver: [none] "
+		getresp "none"
+		if [ "X${resp}" != X"none" ]; then
+			echo "domain $FQDN" > /tmp/resolv.conf
+			echo "nameserver $resp" >> /tmp/resolv.conf
+			echo "search $FQDN" >> /tmp/resolv.conf
+
+			echo -n "Would you like to use the nameserver now? [y] "
+			getresp "y"
+			case "$resp" in
+				y*|Y*)
+					cp /tmp/resolv.conf \
+					    /tmp/resolv.conf.shadow
+					;;
+
+				*)
+					;;
+			esac
+		fi
+
+		echo ""
+		echo "The host table is as follows:"
+		echo ""
+		cat /tmp/hosts
+		echo ""
+		echo "You may want to edit the host table in the event that"
+		echo "you need to mount an NFS server."
+		echo -n "Would you like to edit the host table? [n] "
+		getresp "n"
+		case "$resp" in
+			y*|Y*)
+				${EDITOR} /tmp/hosts
+				;;
+
+			*)
+				;;
+		esac
+
+		cat << \__network_config_2
+
+You will now be given the opportunity to escape to the command shell to
+do any additional network configuration you may need.  This may include
+adding additional routes, if needed.  In addition, you might take this
+opportunity to redo the default route in the event that it failed above.
+If you do change the default route, and wish for that change to carry over
+to the installed system, execute the following command at the shell
+prompt:
+
+	echo <ip_address_of_gateway> > /tmp/mygate
+
+where <ip_address_of_gateway> is the IP address of the default router.
+
+__network_config_2
+		echo -n "Escape to shell? [n] "
+		getresp "n"
+		case "$resp" in
+			y*|Y*)
+				echo "Type 'exit' to return to install."
+				sh
+				;;
+
+			*)
+				;;
+		esac
+		;;
+	*)
+		;;
+esac
+
+# Now that the network has been configured, it is safe to configure the
+# fstab.
+(
+	while read _dev _mp; do
+		if [ "$mp" = "/" ]; then
+			echo /dev/$_dev $_mp ffs rw 1 1
+		else
+			echo /dev/$_dev $_mp ffs rw 1 2
+		fi
+	done
+) < ${FILESYSTEMS} > /tmp/fstab
+
+echo	"The fstab is configured as follows:"
+echo	""
+cat /tmp/fstab
+cat << \__fstab_config_1
+
+You may wish to edit the fstab.  For example, you may need to resolve
+dependencies in the order which the filesystems are mounted.  You may
+also wish to take this opportunity to place NFS mounts in the fstab.
+This would be especially useful if you plan to keep '/usr' on an NFS
+server.
+
+__fstab_config_1
+echo -n	"Edit the fstab? [n] "
+getresp "n"
+case "$resp" in
+	y*|Y*)
+		${EDITOR} /tmp/fstab
+		;;
+
+	*)
+		;;
+esac
+
+echo ""
+munge_fstab /tmp/fstab /tmp/fstab.shadow
+mount_fs /tmp/fstab.shadow
+
+mount | while read line; do
+	set -- $line
+	if [ "$2" = "/" -a "$3" = "nfs" ]; then
+		echo "You appear to be running diskless."
+		echo -n	"Are the install sets on one of your currently mounted filesystems? [n] "
+		getresp "n"
+		case "$resp" in
+			y*|Y*)
+				get_localdir
+				;;
+			*)
+				;;
+		esac
+	fi
+done
+
+install_sets $ALLSETS $MDSETS
+
+# Copy in configuration information and make devices in target root.
+(
+	cd /tmp
+	for file in fstab hostname.* hosts myname mygate resolv.conf; do
+		if [ -f $file ]; then
+			echo -n "Copying $file..."
+			cp $file /mnt/etc/$file
+			echo "done."
+		fi
+	done
+
+	# If no zoneinfo on the installfs, give them a second chance
+	if [ ! -e /usr/share/zoneinfo ]; then
+		get_timezone
+	fi
+	if [ ! -e /mnt/usr/share/zoneinfo ]; then
+		echo "Cannot install timezone link..."
+	else
+		echo -n "Installing timezone link..."
+		rm -f /mnt/etc/localtime
+		ln -s /usr/share/zoneinfo/$TZ /mnt/etc/localtime
+		echo "done."
+	fi
+	if [ ! -x /mnt/dev/MAKEDEV ]; then
+		echo "No /dev/MAKEDEV installed, something is wrong here..."
+	else
+		echo -n "Making devices..."
+		pid=`twiddle`
+		cd /mnt/dev
+		sh MAKEDEV all
+		kill $pid
+		echo "done."
+	fi
+	md_copy_kernel
+
+	md_installboot ${ROOTDISK}
+)
+
+unmount_fs /tmp/fstab.shadow
+
+# Pat on the back.
+md_congrats
+
+# ALL DONE!
+exit 0
diff --git a/distrib/hp300/ramdisk/install.sub b/distrib/hp300/ramdisk/install.sub
new file mode 100644
index 00000000000..18e836fd309
--- /dev/null
+++ b/distrib/hp300/ramdisk/install.sub
@@ -0,0 +1,1331 @@
+#!/bin/sh
+#	$OpenBSD: install.sub,v 1.1 1997/02/16 18:20:04 downsj Exp $
+#	$NetBSD: install.sub,v 1.5.2.8 1996/09/02 23:25:02 pk Exp $
+#
+# Copyright (c) 1996 The NetBSD Foundation, Inc.
+# All rights reserved.
+#
+# This code is derived from software contributed to The NetBSD Foundation
+# by Jason R. Thorpe.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#        This product includes software developed by the NetBSD
+#        Foundation, Inc. and its contributors.
+# 4. Neither the name of The NetBSD Foundation nor the names of its
+#    contributors may be used to endorse or promote products derived
+#    from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
+# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+#	OpenBSD installation/upgrade script - common subroutines.
+
+ROOTDISK=""				# filled in below
+VERSION=				# filled in automatically (see list)
+export VERSION
+
+ALLSETS="base comp etc games man misc text"	# default install sets
+UPGRSETS="base comp games man misc text"	# default upgrade sets
+THESETS=					# one of the above
+
+local_sets_dir=""			# Path searched for sets by install_sets
+					# on the local filesystems
+
+# decide upon an editor
+if [ X$EDITOR = X ]; then
+	if [ -x /usr/bin/vi ]; then
+		EDITOR=vi
+	else
+		EDITOR=ed
+	fi
+fi
+
+getresp() {
+	read resp
+	if [ "X$resp" = "X" ]; then
+		resp=$1
+	fi
+}
+
+isin() {
+# test the first argument against the remaining ones, return succes on a match
+	_a=$1; shift
+	while [ $# != 0 ]; do
+		if [ "$_a" = "$1" ]; then return 0; fi
+		shift
+	done
+	return 1
+}
+
+rmel() {
+# remove first argument from list formed by the remaining arguments
+	local	_a
+
+	_a=$1; shift
+	while [ $# != 0 ]; do
+		if [ "$_a" != "$1" ]; then
+			echo "$1";
+		fi
+		shift
+	done
+}
+
+cutword () {
+# read a line of data, return Nth element.
+	local _a
+	local _n
+	local _oifs
+
+	# optional field separator
+	_oifs="$IFS"
+	case "$1" in
+		-t?*) IFS=${1#-t}; shift;;
+	esac
+
+	_n=$1
+	read _a; set -- $_a
+	IFS="$_oifs"
+	if [ "$1" = "" ]; then return; fi
+	eval echo \$$_n
+}
+
+cutlast () {
+# read a line of data, return last element. Equiv. of awk '{print $NF}'.
+	local _a
+	local _oifs
+
+	# optional field separator
+	_oifs="$IFS"
+	case "$1" in
+		-t?*) IFS=${1#-t}; shift;;
+	esac
+
+	read _a; set -- $_a
+	IFS="$_oifs"
+	if [ "$1" = "" ]; then return; fi
+	while [ "$#" -gt 10 ]; do shift 10; done
+	eval echo \$$#
+}
+
+firstchar () {
+# return first character of argument
+	local _a
+	_a=$1
+	while [ ${#_a} != 1 ]; do
+		_a=${_a%?}
+	done
+	echo $_a
+}
+
+basename () {
+	local _oifs
+	if [ "$1" = "" ]; then return; fi
+	_oifs="$IFS"
+	IFS="/"
+	set -- $1
+	IFS="$_oifs"
+	while [ "$#" -gt 10 ]; do shift 10; done
+	eval echo \$$#
+}
+
+dir_has_sets() {
+	# return true when the directory $1 contains a set for $2...$n
+	local _dir
+	local _file
+
+	_dir=$1; shift
+	for _file in $*
+	do
+		if [ -f $_dir/${_file}.tar.gz ]; then
+			return 0
+		fi
+		# Try for stupid msdos convention
+		if [ -f $_dir/${_file}.tgz ]; then
+			return 0
+		fi
+	done
+	return 1
+}
+
+twiddle() {
+# spin the propeller so we don't get bored
+	while : ; do  
+		sleep 1; echo -n "\010/";
+		sleep 1; echo -n "\010-";
+		sleep 1; echo -n "\010\\\\";
+		sleep 1; echo -n "\010|";
+	done >> /dev/tty & echo $!
+}
+
+get_localdir() {
+	# $1 is relative mountpoint
+	local _mp
+	local _dir
+
+	_mp=$1
+	_dir=
+	while : ; do
+	    echo -n "Enter the pathname where the sets are stored [$_dir] "
+	    getresp "$_dir"
+	    _dir=$resp
+
+	    # Allow break-out with empty response
+	    if [ -z "$_dir" ]; then
+		echo -n "Are you sure you don't want to set the pathname? [n] "
+		getresp "n"
+		case "$resp" in
+			y*|Y*)
+				break
+				;;
+			*)
+				continue
+				;;
+		esac
+	    fi
+
+	    if dir_has_sets "$_mp/$_dir" $THESETS
+	    then
+		local_sets_dir="$_mp/$_dir"
+		break
+	    else
+		cat << __get_reldir_1
+The directory \"$local_sets_dir\" does not exist, or does not hold any of the
+upgrade sets.
+__get_reldir_1
+		echo -n "Re-enter pathname? [y] "
+		getresp "y"
+		case "$resp" in
+			y*|Y*)
+				;;
+			*)
+				local_sets_dir=""
+				break
+				;;
+		esac
+	    fi
+	done
+}
+
+getrootdisk() {
+	cat << \__getrootdisk_1
+
+The installation program needs to know which disk to consider
+the root disk.  Note the unit number may be different than
+the unit number you used in the standalone installation
+program.
+
+Available disks are:
+
+__getrootdisk_1
+	_DKDEVS=`md_get_diskdevs`
+	echo	"$_DKDEVS"
+	echo	""
+	echo -n	"Which disk is the root disk? "
+	getresp ""
+	if isin $resp $_DKDEVS ; then
+		ROOTDISK="$resp"
+	else
+		echo ""
+		echo "The disk $resp does not exist."
+		ROOTDISK=""
+	fi
+}
+
+labelmoredisks() {
+	cat << \__labelmoredisks_1
+
+You may label the following disks:
+
+__labelmoredisks_1
+	echo "$_DKDEVS"
+	echo	""
+	echo -n	"Label which disk? [done] "
+	getresp "done"
+	case "$resp" in
+		done)
+			;;
+
+		*)
+			if isin $resp $_DKDEVS ; then
+				md_labeldisk $resp
+			else
+				echo ""
+				echo "The disk $resp does not exist."
+			fi
+			;;
+	esac
+}
+
+addhostent() {
+	# $1 - IP address
+	# $2 - symbolic name
+
+	# Create an entry in the hosts table.  If no host table
+	# exists, create one.  If the IP address already exists,
+	# replace it's entry.
+	if [ ! -f /tmp/hosts ]; then
+		echo "127.0.0.1 localhost" > /tmp/hosts
+	fi
+
+	sed "/^$1 /d" < /tmp/hosts > /tmp/hosts.new
+	mv /tmp/hosts.new /tmp/hosts
+
+	echo "$1 $2 $2.$FQDN" >> /tmp/hosts
+}
+
+addifconfig() {
+	# $1 - interface name
+	# $2 - interface symbolic name
+	# $3 - interface IP address
+	# $4 - interface netmask
+	# $5 - (optional) interface link-layer directives
+
+	# Create a hostname.* file for the interface.
+	echo "inet $2 $4 NONE $5" > /tmp/hostname.$1
+
+	addhostent $3 $2
+}
+
+configurenetwork() {
+	local _ifsdone
+	local _ifs
+
+	_IFS=`md_get_ifdevs`
+	_ifsdone=""
+	resp=""		# force at least one iteration
+	while [ "X${resp}" != X"done" ]; do
+	cat << \__configurenetwork_1
+
+You may configure the following network interfaces (the interfaces
+marked with [X] have been succesfully configured):
+
+__configurenetwork_1
+
+		for _ifs in $_IFS; do
+			if isin $_ifs $_ifsdone ; then
+				echo -n "[X] "
+			else
+				echo -n "    "
+			fi
+			echo $_ifs
+		done
+		echo	""
+		echo -n	"Configure which interface? [done] "
+		getresp "done"
+		case "$resp" in
+		"done")
+			;;
+		*)
+			_ifs=$resp
+			if isin $_ifs $_IFS ; then
+				if configure_ifs $_ifs ; then
+					_ifsdone="$_ifs $_ifsdone"
+				fi
+			else
+				echo "Invalid response: \"$resp\" is not in list"
+			fi
+			;;
+		esac
+	done
+}
+
+configure_ifs() {
+
+	local _up
+	local _interface_name
+	local _interface_ip
+	local _interface_mask
+	local _interface_symname
+	local _interface_extra
+
+	_interface_name=$1
+
+	set -- `ifconfig $_interface_name | sed -n '
+		1s/.*<UP,.*$/UP/p
+		1s/.*<.*>*$/DOWN/p
+		2s/inet//
+		2s/--> [0-9.][0-9.]*//
+		2s/netmask//
+		2s/broadcast//
+		2p'`
+
+	_up=$1
+	_interface_ip=$2
+	_interface_mask=$3
+
+	# Get IP address
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "IP address? [$_interface_ip] "
+		getresp "$_interface_ip"
+		_interface_ip=$resp
+	done
+
+	# Get symbolic name
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Symbolic (host) name? "
+		getresp ""
+		_interface_symname=$resp
+	done
+
+	# Get netmask
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Netmask? [$_interface_mask] "
+		getresp "$_interface_mask"
+		_interface_mask=$resp
+	done
+
+	echo "Your network interface might require additional link-layer"
+	echo "directives (like \`link0'). If this is the case you can enter"
+	echo "these at the next prompt."
+	echo ""
+	echo -n "Additional link-layer arguments? [$_interface_extra] "
+	getresp "$_interface_extra"
+	if [ "X${resp}" != X"" ]; then
+		_interface_extra=$resp
+	fi
+
+	# Configure the interface.  If it
+	# succeeds, add it to the permanent
+	# network configuration info.
+	if [ $_up != "UP" ]; then
+		ifconfig ${_interface_name} down
+		if ifconfig ${_interface_name} inet \
+		    ${_interface_ip} \
+		    netmask ${_interface_mask} ${_interface_extra} up ; then
+			addifconfig \
+			    ${_interface_name} \
+			    ${_interface_symname} \
+			    ${_interface_ip} \
+			    ${_interface_mask} ${_interface_extra}
+			return 0
+		fi
+	else
+		echo "Interface ${_interface_name} is already active."
+		echo "Just saving configuration on new root filesystem."
+		addifconfig \
+		    ${_interface_name} \
+		    ${_interface_symname} \
+		    ${_interface_ip} \
+		    ${_interface_mask} ${_interface_extra}
+	fi
+	return 1
+}
+
+# Much of this is gratuitously stolen from /etc/netstart.
+enable_network() {
+
+	# Set up the hostname.
+	if [ ! -f /mnt/etc/myname ]; then
+		echo "ERROR: no /etc/myname!"
+		return 1
+	fi
+	hostname=`cat /mnt/etc/myname`
+	hostname $hostname
+
+	# configure all the interfaces which we know about.
+(
+	tmp="$IFS"
+	IFS="$IFS."
+	set -- `echo /mnt/etc/hostname*`
+	IFS=$tmp
+	unset tmp
+
+	while [ $# -ge 2 ] ; do
+		shift		# get rid of "hostname"
+		(
+			read af name mask bcaddr extras
+			read dt dtaddr
+
+			if [ ! -n "$name" ]; then
+		    echo "/etc/hostname.$1: invalid network configuration file"
+				exit
+			fi
+
+			cmd="ifconfig $1 $af $name "
+			if [ "${dt}" = "dest" ]; then cmd="$cmd $dtaddr"; fi
+			if [ -n "$mask" ]; then cmd="$cmd netmask $mask"; fi
+			if [ -n "$bcaddr" -a "X$bcaddr" != "XNONE" ]; then
+				cmd="$cmd broadcast $bcaddr";
+			fi
+			cmd="$cmd $extras"
+
+			$cmd
+		) < /mnt/etc/hostname.$1
+		shift
+	done
+)
+
+	# set the address for the loopback interface
+	ifconfig lo0 inet localhost
+
+	# use loopback, not the wire
+	route add $hostname localhost
+
+	# /etc/mygate, if it exists, contains the name of my gateway host
+	# that name must be in /etc/hosts.
+	if [ -f /mnt/etc/mygate ]; then
+		route delete default > /dev/null 2>&1
+		route add default `cat /mnt/etc/mygate`
+	fi
+
+	# enable the resolver, if appropriate.
+	if [ -f /mnt/etc/resolv.conf ]; then
+		_resolver_enabled="TRUE"
+		cp /mnt/etc/resolv.conf /tmp/resolv.conf.shadow
+	fi
+
+	# Display results...
+	echo	"Network interface configuration:"
+	ifconfig -a
+
+	echo	""
+
+	if [ "X${_resolver_enabled}" = X"TRUE" ]; then
+		netstat -r
+		echo	""
+		echo	"Resolver enabled."
+	else
+		netstat -rn
+		echo	""
+		echo	"Resolver not enabled."
+	fi
+
+	return 0
+}
+
+install_ftp() {
+	# Get several parameters from the user, and create
+	# a shell script that directs the appropriate
+	# commands into ftp.
+	cat << \__install_ftp_1
+
+This is an automated ftp-based installation process.  You will be asked
+several questions.  The correct set of commands will be placed in a script
+that will be fed to ftp(1).
+
+__install_ftp_1
+	# Get server IP address
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Server IP? [${_ftp_server_ip}] "
+		getresp "${_ftp_server_ip}"
+		_ftp_server_ip=$resp
+	done
+
+	# Get server directory
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Server directory? [${_ftp_server_dir}] "
+		getresp "${_ftp_server_dir}"
+		_ftp_server_dir=$resp
+	done
+
+	# Get login name
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Login? [${_ftp_server_login}] "
+		getresp "${_ftp_server_login}"
+		_ftp_server_login=$resp 
+	done
+
+	# Get password
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Password? [${_ftp_server_password}] "
+		getresp "${_ftp_server_password}"
+		_ftp_server_password=$resp
+	done
+
+	# Get list of files for mget.
+	cat << \__install_ftp_2
+
+You will now be asked for files to extract.  Enter one file at a time.
+When you are done entering files, enter 'done'.
+
+__install_ftp_2
+	echo "#!/bin/sh" > /tmp/ftp-script.sh
+	echo "cd /mnt" >> /tmp/ftp-script.sh
+	echo "ftp -i -n $_ftp_server_ip << \__end_commands" >> \
+	    /tmp/ftp-script.sh
+	echo "user $_ftp_server_login $_ftp_server_password" >> \
+	    /tmp/ftp-script.sh
+	echo "bin" >> /tmp/ftp-script.sh
+	echo "cd $_ftp_server_dir" >> /tmp/ftp-script.sh
+
+	resp=""		# force one interation
+	while [ "X${resp}" != X"done" ]; do
+		echo -n "File? [done] "
+		getresp "done"
+		if [ "X${resp}" = X"done" ]; then
+			break
+		fi
+
+		_ftp_file=`echo ${resp} | cutword 1'`
+		echo "get ${_ftp_file} |\"pax -r -z -v\"" >> \
+		    /tmp/ftp-script.sh
+	done
+
+	echo "quit" >> /tmp/ftp-script.sh
+	echo "__end_commands" >> /tmp/ftp-script.sh
+
+	sh /tmp/ftp-script.sh
+	rm -f /tmp/ftp-script.sh
+	echo "Extraction complete."
+}
+
+install_from_mounted_fs() {
+	# $1 - directory containing installation sets
+	local _filename
+	local _sets
+	local _next
+	local _f
+
+	_sets=""
+	if dir_has_sets $1 $THESETS; then
+		for _f in $THESETS ; do
+			if [ -f $1/${_f}.tar.gz ]; then
+				_sets="$_sets ${_f}.tar.gz"
+			elif [ -f $1/${_f}.tgz ]; then
+				_sets="$_sets ${_f}.tgz"
+			fi
+		done
+	else
+		echo "There are no NetBSD install sets available in \"$1\""
+		return
+	fi
+
+	while : ; do
+		echo "The following sets are available for extraction:"
+		echo "(marked sets have already been extracted)"
+		echo ""
+
+		_next=""
+		for _f in $_sets ; do
+			if isin $_f $_setsdone; then
+				echo -n "[X] "
+				_next=""
+			else
+				echo -n "    "
+				if [ -z "$_next" ]; then _next=$_f; fi
+			fi
+			echo $_f
+		done
+		echo ""
+
+		# Get the name of the file.
+		if [ "X$_next" = "X" ]; then resp=n; else resp=y; fi
+		echo -n "Continue extraction [$resp]?"
+		getresp "$resp"
+		if [ "$resp" = "n" ]; then
+			break
+		fi
+
+		echo -n "File name [$_next]? "
+		getresp "$_next"
+		_f=$resp
+		_filename="/$1/$_f"
+
+		# Ensure file exists
+		if [ ! -f $_filename ]; then
+			echo "File $_filename does not exist.  Check to make"
+			echo "sure you entered the information properly."
+			continue
+		fi
+
+		# Extract file
+		cat $_filename | (cd /mnt; tar --unlink -zxvpf -)
+		echo "Extraction complete."
+		_setsdone="$_f $_setsdone"
+
+	done
+}
+
+install_cdrom() {
+	local _drive
+	local _partition_range
+	local _partition
+	local _fstype
+	local _directory
+
+	# Get the cdrom device info
+	cat << \__install_cdrom_1
+
+The following CD-ROM devices are installed on your system; please select
+the CD-ROM device containing the partition with the installation sets:
+
+__install_cdrom_1
+	_CDDEVS=`md_get_cddevs`
+	echo    "$_CDDEVS"
+	echo	""
+	echo -n	"Which is the CD-ROM with the installation media? [abort] "
+	getresp "abort"
+	case "$resp" in
+		abort)
+			echo "Aborting."
+			return
+			;;
+
+		*)
+			if isin $resp $_CDDEVS ; then
+				_drive=$resp
+			else
+				echo ""
+				echo "The CD-ROM $resp does not exist."
+				echo "Aborting."
+				return
+			fi
+			;;
+	esac
+
+	# Get partition
+	_partition_range=`md_get_partition_range`
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Partition? [c] "
+		getresp "c"
+		case "$resp" in
+			$_partition_range)
+				_partition=$resp
+				;;
+
+			*)
+				echo "Invalid response: $resp"
+				resp=""		# force loop to repeat
+				;;
+		esac
+	done
+
+	# Ask for filesystem type
+	cat << \__install_cdrom_2
+
+There are two CD-ROM filesystem types currently supported by this program:
+	1) ISO-9660 (cd9660)
+	2) Berkeley Fast Filesystem (ffs)
+
+__install_cdrom_2
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Which filesystem type? [cd9660] "
+		getresp "cd9660"
+		case "$resp" in
+			cd9660|ffs)
+				_fstype=$resp
+				;;
+
+			*)
+				echo "Invalid response: $resp"
+				resp=""		# force loop to repeat
+				;;
+		esac
+	done
+
+	# Mount the CD-ROM
+	if ! mount -t ${_filesystem} -o ro \
+	    /dev/${_drive}${_partition} /mnt2 ; then
+		echo "Cannot mount CD-ROM drive.  Aborting."
+		return
+	fi
+
+	# Get the directory where the file lives
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo "Enter the directory relative to the mount point that"
+		echo -n "contains the file. [${_directory}] "
+		getresp "${_directory}"
+	done
+	_directory=$resp
+
+	install_from_mounted_fs /mnt2/${_directory}
+	umount -f /mnt2 > /dev/null 2>&1
+}
+
+mount_a_disk() {
+	# Mount a disk on /mnt2. The set of disk devices to choose from
+	# is $_DKDEVS.
+	# returns 0 on failure.
+
+	local _drive
+	local _partition_range
+	local _partition
+	local _fstype
+	local _fsopts
+	local _directory
+	local _md_fstype
+	local _md_fsopts
+
+	getresp "abort"
+	case "$resp" in
+		abort)
+			echo "Aborting."
+			return 0
+			;;
+
+		*)
+			if isin $resp $_DKDEVS ; then
+				_drive=$resp
+			else
+				echo ""
+				echo "The disk $resp does not exist."
+				echo "Aborting."
+				return 0
+			fi
+			;;
+	esac
+
+	# Get partition
+	_partition_range=`md_get_partition_range`
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Partition? [d] "
+		getresp "d"
+		case "$resp" in
+			$_partition_range)
+				_partition=$resp
+				;;
+
+			*)
+				echo "Invalid response: $resp"
+				resp=""		# force loop to repeat
+				;;
+		esac
+	done
+
+	# Ask for filesystem type
+	cat << \__mount_a_disk_2
+
+The following filesystem types are supported:
+	1) ffs
+__mount_a_disk_2
+	_md_fstype=`md_native_fstype`
+	_md_fsopts=`md_native_fsopts`
+	if [ ! -z "$_md_fstype" ]; then
+		echo "	2) $_md_fstype"
+	else
+		_md_fstype="_undefined_"
+	fi
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Which filesystem type? [ffs] "
+		getresp "ffs"
+		case "$resp" in
+			ffs)
+				_fstype=$resp
+				_fsopts="ro"
+				;;
+			$_md_fstype)
+				_fstype=$resp
+				_fsopts=$_md_fsopts
+				;;
+			*)
+				echo "Invalid response: $resp"
+				resp=""		# force loop to repeat
+				;;
+		esac
+	done
+
+	# Mount the disk
+	if ! mount -t ${_fstype} -o $_fsopts \
+	    /dev/${_drive}${_partition} /mnt2 ; then
+		echo "Cannot mount disk.  Aborting."
+		return 0
+	fi
+	return 1
+}
+
+install_disk() {
+	local _directory
+
+	cat << \__install_disk_1
+
+The following disk devices are installed on your system; please select
+the disk device containing the partition with the installation sets:
+
+__install_disk_1
+	_DKDEVS=`md_get_diskdevs`
+	echo    "$_DKDEVS"
+	echo	""
+	echo -n	"Which is the disk with the installation sets? [abort] "
+
+	if mount_a_disk ; then
+		return
+	fi
+
+	# Get the directory where the file lives
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo "Enter the directory relative to the mount point that"
+		echo -n "contains the file. [${_directory}] "
+		getresp "${_directory}"
+	done
+	_directory=$resp
+
+	install_from_mounted_fs /mnt2/${_directory}
+	umount -f /mnt2 > /dev/null 2>&1
+}
+
+install_nfs() {
+	# Get the IP address of the server
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Server IP address? [${_nfs_server_ip}] "
+		getresp "${_nfs_server_ip}"
+	done
+	_nfs_server_ip=$resp
+
+	# Get server path to mount
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Filesystem on server to mount? [${_nfs_server_path}] "
+		getresp "${_nfs_server_path}"
+	done
+	_nfs_server_path=$resp
+
+	# Determine use of TCP
+	echo -n "Use TCP transport (only works with capable NFS server)? [n] "
+	getresp "n"
+	case "$resp" in
+		y*|Y*)
+			_nfs_tcp="-T"
+			;;
+
+		*)
+			_nfs_tcp=""
+			;;
+	esac
+
+	# Mount the server
+	mkdir /mnt2 > /dev/null 2>&1
+	if ! mount_nfs $_nfs_tcp ${_nfs_server_ip}:${_nfs_server_path} \
+	    /mnt2 ; then
+		echo "Cannot mount NFS server.  Aborting."
+		return
+	fi
+
+	# Get the directory where the file lives
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo "Enter the directory relative to the mount point that"
+		echo -n "contains the file. [${_nfs_directory}] "
+		getresp "${_nfs_directory}"
+	done
+	_nfs_directory=$resp
+
+	install_from_mounted_fs /mnt2/${_nfs_directory}
+	umount -f /mnt2 > /dev/null 2>&1
+}
+
+install_tape() {
+	local _xcmd
+
+	# Get the name of the tape from the user.
+	cat << \__install_tape_1
+
+The installation program needs to know which tape device to use.  Make
+sure you use a "no rewind on close" device.
+
+__install_tape_1
+	_tape=`basename $TAPE`
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Name of tape device? [${_tape}]"
+		getresp "${_tape}"
+	done
+	_tape=`basename $resp`
+	TAPE="/dev/${_tape}"
+	if [ ! -c $TAPE ]; then
+		echo "$TAPE does not exist or is not a character special file."
+		echo "Aborting."
+		return
+	fi
+	export TAPE
+
+	# Rewind the tape device
+	echo -n "Rewinding tape..."
+	if ! mt rewind ; then
+		echo "$TAPE may not be attached to the system or may not be"
+		echo "a tape device.  Aborting."
+		return
+	fi
+	echo "done."
+
+	# Get the file number
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "File number? "
+		getresp ""
+		case "$resp" in
+			[1-9]*)
+				_nskip=`expr $resp - 1`
+				;;
+
+			*)
+				echo "Invalid file number ${resp}."
+				resp=""		# fore loop to repeat
+				;;
+		esac
+	done
+
+	# Skip to correct file.
+	echo -n "Skipping to source file..."
+	if [ "X${_nskip}" != X"0" ]; then
+		if ! mt fsf $_nskip ; then
+			echo "Could not skip $_nskip files.  Aborting."
+			return
+		fi
+	fi
+	echo "done."
+
+	cat << \__install_tape_2
+
+There are 2 different ways the file can be stored on tape:
+
+	1) an image of a gzipped tar file
+	2) a standard tar image
+
+__install_tape_2
+	resp=""		# force one iteration
+	while [ "X${resp}" = X"" ]; do
+		echo -n "Which way is it? [1] "
+		getresp "1"
+		case "$resp" in
+		1)
+			_xcmd="tar --unlink -zxvpf -"
+			;;
+
+		2)
+			_xcmd="tar --unlink -xvpf -"
+			;;
+
+		*)
+			echo "Invalid response: $resp."
+			resp=""		# force loop to repeat
+			;;
+		esac
+		( cd /mnt; dd if=$TAPE | $_xcmd )
+	done
+	echo "Extraction complete."
+}
+
+get_timezone() {
+	local _a
+	local _zonepath
+
+	#
+	# If the zoneinfo is not on the installation medium or on the
+	# installed filesystem, set TZ to GMT and return immediatly.
+	#
+	if [ ! -e /usr/share/zoneinfo -a ! -e /mnt/usr/share/zoneinfo ]; then
+		TZ=GMT
+		return
+	fi
+	if [ ! -d /usr/share/zoneinfo ]; then
+		_zonepath=/mnt
+	else
+		_zonepath=""
+	fi
+		
+cat << \__get_timezone_1
+
+Select a time zone for your location. Timezones are represented on the
+system by a directory structure rooted in "/usr/share/timezone". Most
+timezones can be selected by entering a token like "MET" or "GMT-6".
+Other zones are grouped by continent, with detailed zone information
+separated by a slash ("/"), e.g. "US/Pacific".
+
+To get a listing of what's available in /usr/share/zoneinfo, enter "?"
+at the prompts below.
+
+__get_timezone_1
+	if [ X$TZ = X ]; then
+		TZ=`ls -l /mnt/etc/localtime 2>/dev/null | cutlast`
+		TZ=${TZ#/usr/share/zoneinfo/}
+	fi
+	while :; do
+		echo -n	"What timezone are you in [\`?' for list] [$TZ]? "
+		getresp "$TZ"
+		case "$resp" in
+		"")
+			echo "Timezone defaults to GMT"
+			TZ="GMT"
+			break;
+			;;
+		"?")
+			ls ${_zonepath}/usr/share/zoneinfo
+			;;
+		*)
+			_a=$resp
+			while [ -d ${_zonepath}/usr/share/zoneinfo/$_a ]; do
+				echo -n "There are several timezones available"
+				echo " within zone '$_a'"
+				echo -n "Select a sub-timezone [\`?' for list]: "
+				getresp ""
+				case "$resp" in
+				"?") ls ${_zonepath}/usr/share/zoneinfo/$_a ;;
+				*)	_a=${_a}/${resp}
+					if [ -f ${_zonepath}/usr/share/zoneinfo/$_a ]; then
+						break;
+					fi
+					;;
+				esac
+			done
+			if [ -f ${_zonepath}/usr/share/zoneinfo/$_a ]; then
+				TZ="$_a"
+				echo "You have selected timezone \"$_a\"".
+				break 2
+			fi
+			echo "'/usr/share/zoneinfo/$_a' is not a valid timezone on this system."
+			;;
+		esac
+	done
+}
+
+install_sets()
+{
+	local _yup
+	_yup="FALSE"
+
+	# Ask the user which media to load the distribution from.
+	cat << \__install_sets_1
+
+It is now time to extract the installation sets onto the hard disk.
+Make sure the sets are either on a local device (i.e. tape, CD-ROM) or on a
+network server.
+
+__install_sets_1
+
+	if [ "X$local_sets_dir" != "X" ]; then
+		install_from_mounted_fs ${local_sets_dir}
+		if [ X"$_setsdone" != X ]; then
+			_yup="TRUE"
+		fi
+	fi
+
+	# Go on prodding for alternate locations
+	resp=""		# force at least one iteration
+	while [ X"${resp}" = X ]; do
+		# If _yup is not FALSE, it means that we extracted sets above.
+		# If that's the case, bypass the menu the first time.
+		if [ X"$_yup" = X"FALSE" ]; then
+			echo -n	"Install from (f)tp, (t)ape, (C)D-ROM, (N)FS"
+			echo -n " or local (d)isk? "
+			getresp ""
+			case "$resp" in
+			d*|D*)
+				install_disk
+				;;
+			f*|F*)
+				install_ftp
+				;;
+			t*|T*)
+				install_tape
+				;;
+			c*|C*)
+				install_cdrom
+				;;
+			n*|N*)
+				install_nfs
+				;;
+			*)
+				echo "Invalid response: $resp"
+				resp=""
+				;;
+			esac
+		else
+			_yup="FALSE"	# So we'll ask next time
+		fi
+
+		# Give the user the opportunity to extract more sets. They
+		# don't necessarily have to come from the same media.
+		echo	""
+		echo -n	"Extract more sets? [n] "
+		getresp "n"
+		case "$resp" in
+		y*|Y*)
+			# Force loop to repeat
+			resp=""
+			;;
+
+		*)
+			;;
+		esac
+	done
+}
+
+munge_fstab()
+{
+	local _fstab
+	local _fstab_shadow
+	local _dev
+	local _mp
+	local _fstype
+	local _rest
+
+	# Now that the 'real' fstab is configured, we munge it into a 'shadow'
+	# fstab which we'll use for mounting and unmounting all of the target
+	# filesystems relative to /mnt.  Mount all filesystems.
+	_fstab=$1
+	_fstab_shadow=$2
+	( while read _dev _mp _fstype _rest; do
+		# Skip comment lines
+		case "$_dev" in
+			\#*)	continue;;
+			*)	;;
+		esac
+		# and some filesystem types (like there are swap,kernfs,...)
+		case "$_fstype" in
+			ffs|ufs|nfs)	;;
+			*)	continue;;
+		esac
+		if [ "$_mp" = "/" ]; then
+			echo $_dev /mnt $_fstype $_rest
+		else
+			echo $_dev /mnt$_mp $_fstype $_rest
+		fi
+	    done ) < $_fstab > $_fstab_shadow
+}
+
+mount_fs()
+{
+	# Must mount filesystems manually, one at a time, so we can make
+	# sure the mount points exist.
+	# $1 is a file in fstab format
+	local _fstab
+
+	_fstab=$1
+
+	( while read line; do
+		set -- $line
+		_dev=$1
+		_mp=$2
+		_fstype=$3
+		_opt=$4
+
+		# If not the root filesystem, make sure the mount
+		# point is present.
+		if [ "X{$_mp}" != X"/mnt" ]; then
+			mkdir -p $_mp
+		fi
+
+		# Mount the filesystem.  If the mount fails, exit
+		# with an error condition to tell the outer
+		# later to bail.
+		if ! mount -v -t $_fstype -o $_opt $_dev $_mp ; then
+			# error message displated by mount
+			exit 1
+		fi
+	done ) < $_fstab
+
+	if [ "X${?}" != X"0" ]; then
+		cat << \__mount_filesystems_1
+
+FATAL ERROR:  Cannot mount filesystems.  Double-check your configuration
+and restart the installation process.
+__mount_filesystems_1
+		exit
+	fi
+}
+
+unmount_fs()
+{
+	# Unmount all filesystems and check their integrity.
+	# Usage: [-fast] <fstab file>
+	local _fast
+	local _fstab
+	local _pid
+
+	if [ "$1" = "-fast" ]; then
+		_fast=1
+		_fstab=$2
+	else
+		_fast=0
+		_fstab=$1
+	fi
+
+	if [ ! \( -f $_fstab -a -s $_fstab \) ]; then
+		echo "fstab empty" > /dev/tty
+		return
+	fi
+
+	if [ $_fast = 0 ]; then
+		echo -n	"Syncing disks..."
+		_pid=`twiddle`
+		sync; sleep 4; sync; sleep 2; sync; sleep 2
+		kill $_pid
+		echo	"done."
+	fi
+
+	(
+		_devs=""
+		_mps=""
+		# maintain reverse order
+		while read line; do
+			set -- $line
+			_devs="$1 ${_devs}"
+			_mps="$2 ${_mps}"
+		done
+		echo -n "Umounting filesystems... "
+		for _mp in ${_mps}; do
+			echo -n "${_mp} "
+			umount ${_mp}
+		done
+		echo "Done."
+
+		if [ $_fast = 0 ]; then
+			exit
+		fi
+		echo "Checking filesystem integrity..."
+		for _dev in ${_devs}; do
+			echo  "${_dev}"
+			fsck -f ${_dev}
+		done
+		echo "Done."
+	) < $_fstab
+}
+
+check_fs()
+{
+	# Check filesystem integrity.
+	# $1 is a file in fstab format
+	local _fstab
+
+	_fstab=$1
+
+	(
+		_devs=""
+		_mps=""
+		while read line; do
+			set -- $line
+			_devs="$1 ${_devs}"
+			_mps="$2 ${_mps}"
+		done
+
+		echo "Checking filesystem integrity..."
+		for _dev in ${_devs}; do
+			echo  "${_dev}"
+			fsck -f ${_dev}
+		done
+		echo "Done."
+	) < $_fstab
+}
diff --git a/distrib/hp300/ramdisk/list b/distrib/hp300/ramdisk/list
new file mode 100644
index 00000000000..e6794566f22
--- /dev/null
+++ b/distrib/hp300/ramdisk/list
@@ -0,0 +1,90 @@
+#	$OpenBSD: list,v 1.1 1997/02/16 18:20:05 downsj Exp $
+
+COPY	${OBJDIR}/raminst		raminst
+LINK	raminst			bin/cat
+LINK	raminst			bin/chmod
+LINK	raminst			bin/cp
+LINK	raminst			bin/df
+LINK	raminst			bin/dd
+LINK	raminst			bin/ed
+LINK	raminst			bin/expr
+LINK	raminst			bin/ln
+LINK	raminst			bin/ls
+LINK	raminst			bin/kill
+LINK	raminst			bin/hostname
+LINK	raminst			bin/mkdir
+LINK	raminst			bin/mv
+LINK	raminst			bin/pwd
+LINK	raminst			bin/rm
+#COPY	${OBJDIR}/sh		bin/sh
+LINK	raminst			bin/sh
+LINK	bin/sh			bin/-sh
+LINK	raminst			bin/stty
+LINK	raminst			bin/sleep
+LINK	raminst			bin/sync
+LINK	raminst			bin/test
+LINK	raminst			bin/[
+LINK	raminst			sbin/disklabel
+LINK	raminst			sbin/fsck
+LINK	raminst			sbin/halt
+LINK	raminst			sbin/ifconfig
+LINK	raminst			sbin/init
+LINK	raminst			sbin/mknod
+LINK	raminst			sbin/mount
+LINK	raminst			sbin/mount_cd9660
+LINK	raminst			sbin/mount_ffs
+LINK	raminst			sbin/mount_kernfs
+LINK	raminst			sbin/mount_nfs
+LINK	raminst			sbin/mount_mfs
+LINK	raminst			sbin/newfs
+LINK	raminst			sbin/reboot
+LINK	raminst			sbin/route
+LINK	raminst			sbin/slattach
+LINK	raminst			sbin/umount
+LINK	raminst			usr/bin/chgrp
+LINK	raminst			usr/bin/cut
+LINK	raminst			usr/bin/ftp
+LINK	raminst			usr/bin/egrep
+LINK	raminst			usr/bin/grep
+LINK	raminst			usr/bin/gzip
+LINK	raminst			usr/bin/more
+LINK	raminst			usr/bin/sed
+LINK	raminst			usr/bin/sort
+LINK	raminst			usr/bin/pax
+LINK	raminst			usr/bin/tip
+LINK	raminst			usr/sbin/chown
+SPECIAL	/bin/rm raminst
+
+# copy the MAKEDEV script and make some devices
+COPY	${DESTDIR}/dev/MAKEDEV	dev/MAKEDEV
+SPECIAL	cd dev; sh MAKEDEV raminst
+
+# we need the contents of /usr/mdec (XXX)
+# COPY	${DESTDIR}/usr/mdec/*	usr/mdec
+
+# various files that we need in /etc for the install
+COPY	${DESTDIR}/etc/group		etc
+COPY	${DESTDIR}/etc/master.passwd	etc
+COPY	${DESTDIR}/etc/passwd		etc
+COPY	${DESTDIR}/etc/protocols	etc
+COPY	${DESTDIR}/etc/pwd.db		etc
+COPY	${DESTDIR}/etc/services		etc
+COPY	${DESTDIR}/etc/spwd.db		etc
+
+# and the common installation tools
+COPY	${TOPDIR}/common/dot.commonutils	.commonutils
+COPY	${TOPDIR}/common/termcap.hp-vt	usr/share/misc/termcap
+
+# the disktab explanation file
+COPY	disktab.preinstall		etc
+
+# and the installation tools
+LINK    sbin/init                 	usr/bin/vi
+COPY	dot.profile			.profile
+COPY	dot.instutils			.instutils
+COPY	install.sh			install
+COPY	install.md			install.md
+COPY	install.sub			install.sub
+COPY	disktab.shadow			etc/disktab.shadow
+
+SPECIAL	chmod 755 install
diff --git a/distrib/hp300/ramdisk/mtree.conf b/distrib/hp300/ramdisk/mtree.conf
new file mode 100644
index 00000000000..dd3b0130168
--- /dev/null
+++ b/distrib/hp300/ramdisk/mtree.conf
@@ -0,0 +1,80 @@
+#
+#	$OpenBSD: mtree.conf,v 1.1 1997/02/16 18:20:05 downsj Exp $
+#	$NetBSD: mtree.conf,v 1.1 1995/07/18 04:13:24 briggs Exp $
+#
+
+/set type=dir uname=root gname=wheel mode=0755
+# .
+.
+
+# ./bin
+bin
+# ./bin
+..
+
+# ./dev
+dev
+# ./dev
+..
+
+# ./etc
+etc
+# ./etc
+..
+
+# ./mnt
+mnt
+# ./mnt
+..
+
+# ./mnt2
+mnt2
+# ./mnt2
+..
+
+# ./sbin
+sbin
+# ./sbin
+..
+
+# ./tmp
+tmp
+# ./tmp
+..
+
+# ./kern
+kern
+# ./kern
+..
+
+# ./usr
+usr
+
+# ./usr/bin
+bin
+# ./usr/bin
+..
+
+# ./usr/mdec
+mdec
+# ./usr/mdec
+..
+
+# ./usr/sbin
+sbin
+# ./usr/sbin
+..
+
+# ./usr/share
+share
+
+# ./usr/share/misc
+misc
+# ./usr/share/misc
+..
+
+# ./usr/share
+..
+
+# ./usr
+..
diff --git a/distrib/hp300/ramdisk/raminst.conf b/distrib/hp300/ramdisk/raminst.conf
new file mode 100644
index 00000000000..00e66ad8434
--- /dev/null
+++ b/distrib/hp300/ramdisk/raminst.conf
@@ -0,0 +1,26 @@
+#
+#	$OpenBSD: raminst.conf,v 1.1 1997/02/16 18:20:05 downsj Exp $
+#	$NetBSD: raminst.conf,v 1.3 1995/09/30 20:00:47 briggs Exp $
+#
+# ram.conf - unified binary for the RAM disk
+#
+
+srcdirs bin sbin usr.bin usr.sbin
+srcdirs gnu/usr.bin
+
+progs cat chmod chown cut cp dd df disklabel ed grep expr fsck_ffs ftp 
+progs gzip ifconfig init hostname kill ln ls mkdir mknod more mount
+progs mount_cd9660 mount_kernfs mount_ffs mount_msdos mount_nfs
+progs mv newfs pwd reboot rm route sed sleep sh slattach sort stty
+progs sync pax test tip umount vim
+
+ln vim vi
+ln chown chgrp
+ln fsck_ffs fsck
+ln sh -sh		# init invokes the shell this way
+ln test [
+ln mount_ffs ffs
+ln newfs mount_mfs
+ln grep egrep
+
+libs -ledit -lutil -ltermcap -lcompat -ll -lm -lz
diff --git a/distrib/hp300/ramdisk/start_rdconfig.sh b/distrib/hp300/ramdisk/start_rdconfig.sh
new file mode 100644
index 00000000000..d22552b968e
--- /dev/null
+++ b/distrib/hp300/ramdisk/start_rdconfig.sh
@@ -0,0 +1,4 @@
+echo rdconfig ${1} ${2}
+rdconfig ${1} ${2} &
+echo  $! >rd.pid 
+