initial version. 3 minute edit away from i386..

7 files changed, 1255 insertions, 0 deletions

diff --git a/distrib/notes/amd64/contents b/distrib/notes/amd64/contents
new file mode 100644
index 00000000000..0981de0389e
--- /dev/null
+++ b/distrib/notes/amd64/contents
@@ -0,0 +1,60 @@
+dnl	$OpenBSD: contents,v 1.1 2004/02/07 21:29:10 deraadt Exp $
+TopPart
+
+OpenBSDfloppy
+
+		floppyB{:--:}OSrev.fs	Another MACHINE boot and installation floppy;
+				this one features all the drivers not available
+				in floppy{:--:}OSrev.fs, such as SCSI, RAID, gigabit
+				ethernet, and such; see below.
+
+		floppyC{:--:}OSrev.fs	Another MACHINE boot and installation floppy;
+				this one features most of the cardbus and
+				pcmcia drivers; see below.
+
+		cdrom{:--:}OSrev.fs	The MACHINE boot and installation
+				2.88MB floppy image that contains almost all
+				OpenBSD drivers; see below.
+
+OpenBSDdistsets
+
+OpenBSDbsd
+
+OpenBSDrd
+
+OpenBSDcd
+
+As well you may be interested in
+
+.../OSREV/tools/
+		miscellaneous MACHINE installation utilities like
+		rawrite.exe, ntrw.exe, gzip.exe, and pfdisk.exe;
+		see installation section, below.
+
+
+OpenBSDfloppydesc(three,Each,s)
+
+In addition, the "tools/" directory contains some utilities that might be
+useful for the installation.
+
+DistributionDescription(ten)
+
+OpenBSDbase(31.0,90.9,shared)
+
+OpenBSDcomp(17.4,57.6,shared)
+
+OpenBSDetc(1.6,6.0)
+
+OpenBSDgame(2.6,6.0)
+
+OpenBSDman(6.3,22.4)
+
+OpenBSDmisc(2.0,6.5)
+
+OpenBSDxbase(11.1,32.8)
+
+OpenBSDxfont(32.0,35.2)
+
+OpenBSDxserv(15.6,40.5)
+
+OpenBSDxshare(1.7,8.6)
diff --git a/distrib/notes/amd64/hardware b/distrib/notes/amd64/hardware
new file mode 100644
index 00000000000..926fafedbb8
--- /dev/null
+++ b/distrib/notes/amd64/hardware
@@ -0,0 +1,902 @@
+dnl	$OpenBSD: hardware,v 1.1 2004/02/07 21:29:10 deraadt Exp $
+OpenBSD/MACHINE OSREV works across a broad range of standard PC's and
+clones, with a wide variety of processors and I/O bus architectures.  It
+can be expected to install and run with minimal difficulties on most
+current products.  The cases where problems may be encountered are
+typically older proprietary PC's, laptops or specialized server boxes
+that rely on a custom BIOS to paper over implementation differences.
+
+OpenBSD does not currently support multiple processors (SMP), but will
+run using one processor on a multi-processor system board.
+
+The minimal configuration to install the system is 12M or 16M of RAM and
+perhaps 100M of disk space.  A custom kernel might be able to run with only
+8MB.  To install the entire system requires much more disk space, and to run
+X or compile the system, more RAM is recommended.  (16M of RAM will actually
+allow you to run X and/or compile but it won't be speedy. Note that until
+you have around 32M of RAM, getting more RAM is more important than getting
+a faster CPU.)
+
+Supported hardware {:-include-:}:
+	Processors
+		All versions of the AMD Athlon 64 processors
+	Buses
+		All standard ISA, EISA, VLB, and PCI bus based machines,
+		including:
+			Intel 450GX/KX based machines
+			Intel 450NX based machines
+			ServerWorks chipset-based machines
+			(We just had to mention those last three, since
+			 they are the hardest to support)
+		Both 16-bit PCMCIA Cards and newer 32-bit CardBus
+		support
+		Universal Serial Bus (USB)
+		The MCA bus found in various IBM PS/2 machines is not
+		supported.
+	Bus Interfaces
+		Standard PCI-PCI bridges, including PCI expansion
+		backplanes
+		YENTA-compatible PCI-CardBus bridges
+	Entropy Sources
+		Interrupt latency collection from many devices
+	Disk Controllers
+		Floppy controllers.
+		ISA MFM, ESDI, IDE, and RLL hard disk controllers.
+	PCI IDE Controllers
+		Acard ATP850, ATP860
+		Acer Labs M5229
+		Advanced Micro Devices 756, 766
+		CMD Tech PCI0640, PCI0643, PCI0646, PCI0648, PCI0649 and PCI0680
+		Contaq Microsytems/Cypress CY82C693
+		HighPoint HPT366, HPT370, HPT372, HPT302, HPT371, HPT374
+		    (RAID mode is not supported)
+		Intel PIIX, PIIX3, and PIIX4
+		Intel 82801 (ICH/ICH0/ICH2/ICH3/ICH4/ICH4-M/ICH5/ICH5R)
+		National Semiconductor PC87415
+		NVIDIA nForce/nForce2
+		Promise PDC20246, PDC20262, PDC20265, PDC20267, PDC20268,
+		    PDC20268R, PDC20269, PDC20271, PDC20275, PDC20276, PDC20277
+		    (RAID mode is not supported)
+		ServerWorks OSB4, CSB5, CSB6
+		Silicon Integrated Systems 5513 (5597/5598)
+		VIA Technologies VT82C586A/B, VT82C596A/B, VT82C686A/B,
+		    VT8231, VT8366, VT8233, VT8235
+		(Other PCI IDE-compliant controllers should work, but
+		 those not listed above may not be capable of DMA modes)
+	SATA Controllers
+		Promise PDC20376 (only parallel ATA mode tested)
+		Silicon Image SiI3112
+	SCSI Host Adapters
+		Adaptec AHA-1540, AHA-154xA, AHA-154xB, AHA-1542C,
+		    AHA-1542CF, AHA-1542CP, AHA-1640 [B] [C]
+		Adaptec AHA-174x [B] [C]
+		Adaptec AIC-6260 and AIC-6360 based boards, including: [B]
+		    the Adaptec AHA-152x and the SoundBlaster SCSI host adapter.
+		    (Note that you cannot boot from these boards if they do not
+		    have a boot ROM; only the AHA-152x and motherboards using
+		    this chip are likely to be bootable, consequently.)
+		Adaptec AIC-7770-based boards, including the Adaptec
+		    AHA-274x and AHA-284x families) [C]
+		Adaptec AHA-[23]94x[W] cards and some on-board PCI designs
+		    using the AIC7870 and AIC7880 chips. [C]
+		Adaptec AHA-[23]94xU[2W] cards and some on-board PCI designs
+		    using the AIC789[01], AIC7895, AIC789[67] chips [C]
+		Adaptec AIC-789[29] chips and products like the
+		    AHA-29160 based upon it which do 160MB/sec SCSI. [C]
+		    (However, the 7899G card is currently not supported with
+		     more than one device attached)
+		AdvanSys 'U', 'UW', 'U2W' and 'U160' PCI SCSI
+		    controllers including the ABP940U[AW],
+		    ASB3940U[AW]-00, ASB3940U2W-00 and ASB3950U160 [A] [B] [C]
+		AMD Am53c974 PCscsi-PCI SCSI controllers, including: [A] [B] [C]
+		    Tekram DC-390
+		Buslogic BT-54x (Adaptec AHA-154x clones) [B] [C]
+		BusLogic 445, 74x, 9xx  (but not the new "FlashPoint" series
+		    of BusLogic SCSI adapters) [B] [C]
+		Initio INIC-940 and INIC-950 based PCI SCSI host
+		  adapters, including: [A] [C]
+		    Initio INI-9090U
+		    Initio INI-9100U/UW
+		    Iwill 2935UW
+		    DTC Domex 3194U Plus
+		QLogic PCI SCSI controllers [A] [C]
+		Seagate/Future Domain ISA SCSI adapter cards, including: [B] [C]
+		    ST01/02
+		    Future Domain TMC-885
+		    Future Domain TMC-950
+		Symbios Logic (NCR) 53C8xx, 53C1010, and 53C1510D-based
+		  PCI SCSI host adapters (including generic/no name cards, old
+		  ASUS cards, the DTC-3130 series, Diamond Fireport series,
+		  etc.) [B] [C]
+		Tekram DC-300B and DC-320E (Adaptec AHA-154x clones) [B] [C]
+		Tekram DC-3x5U (DC-315U, DC-395U/UW/F) TRM-S1040 based
+		  PCI SCSI host adapters [A] [C]
+		Ultrastor 14f, 24f, and 34f [A] [C]
+		WD-7000 SCSI host adapters [A] [B] [C]
+	RAID and Cache Controllers
+		3ware Escalade 3W-5x00, 3W-6x00 [A] [C]
+		Adaptec FSA-based RAID controllers, including: [A] [C]
+		    Adaptec AAC-2622, AAC-364, AAC-3642
+		    Dell PERC 2/Si, PERC 2/QC, PERC 3/Si, PERC 3/Di,
+		      PERC 3/QC
+		    HP NetRAID-4M
+		American Megatrends Inc. MegaRAID controllers in "Mass
+		  Storage" mode [A] [C]
+		Compaq Smart ARRAY PCI/EISA adapters, including: [A] [C]
+		    Compaq Integrated Array
+		    Compaq IAES
+		    Compaq IDA, IDA-2
+		    Compaq RAID LC2
+		    Compaq Smart Array 221, 3100ES, 3200, 4200,
+		      4250ES, 431
+		    Compaq SMART, SMART-2/E, SMART-2/P, SMART-2DH,
+		      SMART-2SL
+		DPT SmartCache and SmartRaid III/IV PCI/EISA adapters [A] [C]
+		Intel (and formerly ICP-Vortex) GDT series [A] [C]
+		I2O (intelligent I/O) RAID controllers, including: [A] [C]
+		    Adaptec SCSI RAID (ASR-2100S, ASR-2110S, ASR-3200S,
+		      etc)
+		    American Megatrends Inc. MegaRAID controllers
+		    (in I2O mode)
+		    and probably other vendors' controllers supporting
+		    I2O, including Intel and Mylex (untested)
+	CD-ROM and DVD-ROM Drives
+		Mitsumi CD-ROM drives [*]
+		    [Note: The Mitsumi driver device probe is known
+		    to cause trouble with several devices!]
+		Most SCSI CD-ROM, CD-R, CD-RW, and DVD drives
+		Most ATAPI CD-ROM, CD-R, CD-RW, and DVD drives
+	Tape Drives
+		Most SCSI tape drives
+		Most SCSI tape changers [G]
+		QIC-02 and QIC-36 format (Archive- and Wangtek-
+		   compatible) tape drives [*]
+	MDA, CGA, VGA, SVGA, and HGC Display Adapters.  (Note that not
+		all of the display adapters OpenBSD/MACHINE
+		are supported by X.  See the XFree86 FAQ for more
+		information.)
+	Serial Ports
+		8250/16450-based ports
+		16550-based ports
+		ST16660-base ports
+		XR16850-based ports (only in the pccom driver)
+		AST-style 4-port serial boards [G]
+		BOCA 8-port serial cards [*]
+		Cyclades Cyclom-{4, 8, 16}Y serial boards [G]
+		Cyclades-Z series multiport serial boards [G]
+		IBM PC-RT 4-port serial boards [*]
+		Addonics FlexPort 8S [*]
+	Parallel Ports
+		Any standard parallel port [G]
+	Communication Controllers
+		Universal Serial Bus host controllers, including:
+		    USB Universal Host Controller [A] [B] [C]
+		    USB Open Host Controller [A] [B] [C]
+		PCI `universal' communication cards, providing serial
+		  and parallel ports, including: [G]
+		    Dolphin Peripherals 4014 (dual parallel) and
+			4035 (dual serial)
+		    SIIG Cyber 2P1S (dual parallel, single serial)
+			and 2S1P (dual serial, single parallel)
+		    SIIG Cyber 4S (quad serial)
+		    SIIG Cyber I/O (single parallel, single serial)
+		    SIIG Cyber Parallel, Parallel Dual, Serial,
+			Serial Dual
+		    VScom PCI 800  (8 port serial)
+		    VScom PCI 011H (1 port parallel)
+		    VScom PCI 100H (1 port serial)
+		    VScom PCI 110H (1 port serial and 1 port parallel)
+		    VScom PCI 200H (2 port serial)
+		    VScom PCI 210H (2 port serial and 1 port parallel)
+		    VScom PCI 400H (4 port serial)
+		    VScom PCI 410H (4 port serial and 1 port parallel)
+		    VScom PCI 800H (8 port serial)
+		    VScom PCI 100L (1 port serial)
+		    VScom PCI 200L (2 port serial)
+		    VScom PCI 210L (2 port serial and 1 port parallel)
+		    VScom PCI 400L (4 port serial)
+		    VScom PCI 800L (8 port serial)
+		    AT&T/Lucent Venus Modem (found on IBM 33L4618
+			card, Actiontec 56K, and others)
+		    US Robotics 3CP5609 PCI (modem)
+		    Lava Computers 2SP-PCI (parallel port)
+		    Lava Computers 2SP-PCI and Quattro-PCI (dual
+			serial)
+		    NEC PK-UG-X008 (serial)
+		    NEC PK-UG-X001 K56flex PCI (modem)
+		    Koutech IOFLEX-2S (dual serial)
+		    Syba Tech Ltd. PCI-4S2P-550-ECP (4 port serial, 2
+			port parallel)
+		    Moxa Technologies Co., Ltd. PCI I/O Card 4S (4 port
+			serial)
+		    Moxa Technologies Co., Ltd. C104H/PCI (4 port serial)
+		    NetMos 2S1P (2 port serial and 1 port parallel)
+		    Boca Research Turbo Serial 654 PCI (4 port serial)
+		    Boca Research Turbo Serial 658 PCI (8 port serial)
+		    SUNIX 400x (1 port parallel)
+		    SUNIX 401x (2 port parallel)
+		    SUNIX 402x (1 port serial)
+		    SUNIX 403x (2 port serial)
+		    SUNIX 405x (4 port serial)
+		    SUNIX 406x (8 port serial)
+		    SUNIX 407x (2 port serial and 1 port parallel)
+		    SUNIX 408x (2 port serial and 2 port parallel)
+		    SUNIX 409x (4 port serial and 2 port parallel)
+	Ethernet Adapters
+		3Com 3c501 [A] [B] [C]
+		3Com 3c503 [B]
+		3Com 3c505 [A] [B] [C]
+		3Com 3c507 [A] [B] [C]
+		3Com 3c509, 3c579, and 3c59x (disabling PnP on 3c509B is
+		    recommended)
+		3Com 3c515 [B]
+		3Com 3c9xx Etherlink XL adapters, including:
+		    3Com 3c900/3c900B PCI adapters
+		    3Com 3c905/3c905B/3c905C PCI adapters
+		    3Com 3c980/3c980C server adapters
+		    3Com 3cSOHO apapter
+		    3Com 3c900B-FL and 3c900B-FL/FX fiber optic
+			adapters
+		    3Com 3c555/3c556/3c556B MiniPCI adapters
+		    Dell on-board 3c920
+		    Dell Precision on-board 3c905B
+		    Dell OptiPlex GX1 on-board 3c918
+		    Dell Latitude laptop docking station embedded
+			3c905
+		    NVidia nForce2 integrated 3Com 9201 (nForce2-ST, nForce2-GT)
+		3Com 3c990 3XP Typhoon/Sidewinder PCI adapters, including: [A]
+		  [B] [C]
+		    3C990-TX-95
+		    3C990-TX-97
+		    3C990-TX-SVR95
+		    3C990-TX-SVR97
+		Adaptec "Starfire" AIC-6915 based PCI adapters, including: [G]
+		    Adaptec Single32 ANA-69011
+		    Adaptec Single64 ANA-62011 and ANA-62020
+		    Adaptec Duo64 ANA-62022
+		    Adaptec Quartet64 ANA-62044
+		ADMtek AL981 ("Comet") and AN983 ("Centaur-P") based PCI
+		adapters, including:
+		    Accton EN2242 MiniPCI
+		    Linksys LNE100TX v4.x
+		    Mototech ME316
+		ADMtek AN986-based USB adapters, including: [A] [B] [C]
+		    Abocom UFE1000
+		    Abocom DSB650TX
+		    Accton USB320-EC
+		    Accton SpeedStream Ethernet
+		    Admtek Pegasus, Pegasus II
+		    Billionton Systems USB100
+		    Corega FEther USB-TX
+		    D-Link DSB-650, 650TX, 650TX-PNA
+		    Elecom LD-USB
+		    Elsa Microlink USB2Ethernet
+		    I/O Data USB ETTX
+		    Kingston KNU101TX
+		    LinkSys USB100TX, USB100H1 and USB10TA
+		    Melco Inc. LUA-TX
+		    Siemens SpeedStream USB
+		    Smartbridces smartNIC 2
+		    SMC 2202USB
+		    SMC EZ Connect USB
+		    SOHOware NUB100
+		AMD LANCE and PCnet-based ISA Ethernet adapters, including: [B]
+		    Novell NE1500T
+		    Novell NE2100
+		    Kingston 21xx
+		AMD PCnet-based PCI Ethernet adapters, including: [B] [C]
+		    BOCALANcard/PCI
+		    AT&T StarLAN 10, EN100, and StarLAN Fiber
+		ASIX 88140A/88141 PCI Ethernet adapters, including:
+		    CNet Pro110B
+		    Alfa Inc. GFC2204
+		CATC USB-EL1210A-based USB adapters, including: [G]
+		    CATC Netmate and Netmate II
+		    Belkin F5U011/F5U111
+		Davicom DM9009, DM9100, DM9102, and DM9102A based PCI adapters,
+		including:
+		    Jaton XpressNet
+		DEC EtherWORKS III adapters, including: [G]
+		    DEC DE203, DE204, DE205
+		Digital DC21x4x-based PCI Ethernet adapters, including:
+		    Older SMC PCI EtherPower 10, 10/100 (models
+		      8432, 9332, and 9334)
+		    Older LinkSys 10, 10/100 (newer models are
+		      supported by other drivers)
+		    Znyx ZX3xx
+		    Cogent EM100FX and EM440TX
+		    Digital PCI DE435, EISA DE425, DE450, DE500
+		    Asante 21140A
+		    D-Link DFE-570TX Quad port
+		Digital DC2114x-based four port cards, including:
+		    Adaptec ANA-6944A
+		    Cogent EM400
+		    Compex 400TX
+		    CompuShack Goldline Quattro
+		    Phobos P430TX
+		    Znyx ZX346
+		Intel EtherExpress 16 [A] [B] [C]
+		Intel EtherExpress PRO/10 ISA [A] [B] [C]
+		Intel i8255x-based (except the i82556) PCI adapters,
+		including:
+		    Intel EtherExpress PRO/10+
+		    Intel EtherExpress PRO/100, PRO/100B, and PRO/100+
+		    Intel EtherExpress PRO/100+ "Management Adapter"
+		    Intel EtherExpress PRO/100 Dual Port
+		    Intel PRO/100 VE, PRO/100 VM, and PRO/100 S
+		Intel 21145-based PCI adapters
+		Kawasaki LSI KL5KUSB101B-based USB adapters, including: [A]
+		  [B] [C]
+		    3Com 3c19250
+		    3Com 3c460 HomeConnect
+		    ADS Technologies USB-10T
+		    Aox USB101
+		    ATen UC10T
+		    Corega USB-T
+		    D-Link DSB-650
+		    Entegra NET-USB-E45
+		    Kawasaki USB101
+		    LinkSys USB10T
+		    Netgear EA101
+		    Peracom USB
+		    SMC 2102/2104USB
+		    I/O Data USB-ET/T
+		Lite-On PNIC/PNIC-II-based adapters, including:
+		    Kingston KNE110TX
+		    LinkSys LNE100TX
+		    Matrox Networks FastNIC 10/100
+		    Netgear FA310TX
+		Macronix 98713/713A/715/715A/725/727/732-based adapters,
+		including:
+		    Accton EN1217
+		    Addtron AEF-320TX/AEF-330TX
+		    CNet PRO120A/B
+		    Complex RL-100TX
+		    NDC Communications SOHOware SFA110A
+		    SVEC PN102-TX Fast Ethernet card
+		Myson Technologies MTD803 3-in-1 Fast Ethernet adapters
+		National Semiconductor DP83815-based PCI adapters,
+		  including: [B] [C]
+		    Netgear FA311/FA312
+		Novell NE1000, NE2000 [B]
+		RealTek 8129, RealTek 8139 Ethernet adapters, including:
+		    Accton MPX 5030/5038
+		    Allied Telesyn AT2550
+		    D-Link DFE530TX+, DFE538TX
+		    Encore ENL832-TX 10/100 M PCI
+		    Genius GF100TXR
+		    KTX-9130TX 10/100 Fast Ethernet
+		    Longshine LCS-8038TX-R
+		    NDC NE100TX-E
+		    Netronix EA-1210 Net Ether 10/100
+		    Nortel BayStack 21
+		    OvisLink LEF-8129TX, LEF-8139TX
+		    SMC EZ Card 10/100 PCI 1211-TX
+		RealTek RTL8150L based USB adapters, including: [G]
+		    Melco Inc. LUA-KTX
+		    GreenHouse GH-USB100B
+		    Linksys USB100M
+		SiS 900 and SiS 7016-based PCI adapters, including: [B] [C]
+		    Mototech ME313
+		    NetSurf NS-KFE30D
+		SMC/WD 8003, 8013, and the SMC "Elite16" ISA boards [B]
+		SMC/WD 8216 (the SMC "Elite16 Ultra" ISA boards) [B]
+		  (See special notice later in this document)
+		SMC 8416 EtherEZ PnP (with PnP mode off) [B]
+		SMC 9432 (EtherPower II) EPIC 10/100 [C]
+		Sun Happy Meal PCI adapters, including: [G]
+		    Fast Ethernet
+		    Quad Fast Ethernet
+		Sundance ST201-based PCI adapters, including: [G]
+		    D-Link DFE-550TX
+		Texas Instruments ThunderLAN PCI adapters, including: [C]
+		    Compaq Netelligent PCI Adapters
+		    Compaq NetFlex 3/P
+		    Compaq Deskpro integrated adapter
+		    Compaq Prosignia integrated adapter
+		    Olicom OC2135, OC2183, OC2325, OC2326
+		    Racore 8165 and 8148
+		    TI ThunderLAN adapters
+		VIA Rhine/RhineII/RhineIII Ethernet adapters, including: [C]
+		    Addtron AEF-360TX
+		    Hawking PN102TX
+		    D-Link DFE530TX
+		Winbond W89C840F Ethernet adapters, including: [A]
+		    Trendware TE100-PCIE
+		    Compex RL100-ATX 10/100baseTX
+	Wireless Ethernet Adapters
+		Compact Flash Adapters (will show up as PCMCIA adapters)
+		    Buffalo AirStation CF [A] [B] [C]
+		    ELSA XI800 CF [A] [B] [C]
+		PCMCIA Adapters
+		    3Com AirConnect 3CRWE737A PCMCIA [A] [B] [C]
+		    ACTIONTEC HWC01170 PCMCIA [A] [B] [C]
+		    Addtron AWP-100 PCMCIA [A] [B] [C]
+		    Agere Orinoco PCMCIA [A] [B] [C]
+		    Aironet 4500/4800 802.11DS ISA PnP, PCMCIA and PCI [A] [B]
+		    BUFFALO AirStation PCMCIA [A] [B] [C]
+		    Cabletron RoamAbout PCMCIA [A] [B] [C]
+		    Cisco 340/350 802.11DS PCMCIA and PCI [A] [B]
+		    Compaq Agency NC5004 PCMCIA [A] [B] [C]
+		    Contec FLEXLAN/FX-DS110-PCC PCMCIA [A] [B] [C]
+		    Corega PCC-11 PCMCIA [A] [B] [C]
+		    Corega PCCA-11 PCMCIA [A] [B] [C]
+		    Corega PCCB-11 PCMCIA [A] [B] [C]
+		    Corega CGWLPCIA11 PCMCIA [A] [B] [C]
+		    Dlink DWL650 PCMCIA [A] [B] [C]
+		    ELSA XI300 PCMCIA [A] [B] [C]
+		    ELSA XI325 PCMCIA [A] [B] [C]
+		    ELSA XI325H PCMCIA [A] [B] [C]
+		    EMTAC A2424i PCMCIA [A] [B] [C]
+		    Ericsson Wireless LAN CARD C11 PCMCIA [A] [B] [C]
+		    Gemtek WL-311 PCMCIA [A] [B] [C]
+		    Hawking Technology WE110P PCMCIA [A] [B] [C]
+		    I-O DATA WN-B11/PCM PCMCIA [A] [B] [C]
+		    Intel PRO/Wireless 2011 PCMCIA [A] [B] [C]
+		    Intersil Prism II PCMCIA [A] [B] [C]
+		    Linksys Instant Wireless WPC11 PCMCIA [A] [B] [C]
+		    Linksys Instant Wireless WPC11 2.5 PCMCIA
+		      [A] [B] [C]
+		    Linksys Instant Wireless WPC11 3.0 PCMCIA
+		      [A] [B] [C]
+		    Lucent WaveLAN PCMCIA [A] [B] [C]
+		    NANOSPEED ROOT-RZ2000 PCMCIA [A] [B] [C]
+		    NEC CMZ-RT-WP PCMCIA [A] [B] [C]
+		    Netgear MA401 PCMCIA [A] [B] [C]
+		    Netgear MA401RA PCMCIA [A] [B] [C]
+		    Nokia C020 Wireless LAN PCMCIA [A] [B] [C]
+		    Nokia C110/C111 Wireless LAN PCMCIA [A] [B] [C]
+		    NTT-ME 11Mbps Wireless LAN PCMCIA [A] [B] [C]
+		    Proxim Harmony PCMCIA [A] [B] [C]
+		    Proxim RangeLAN-DS PCMCIA [A] [B] [C]
+		    RayLink Aviator2.4/Pro 802.11FH PCMCIA [A] [B]
+		    Samsung MagicLAN SWL-2000N PCMCIA [A] [B] [C]
+		    SMC 2632 EZ Connect PCMCIA [A] [B] [C]
+		    Symbol Spectrum24 PCMCIA [A] [B] [C]
+		    TDK LAK-CD011WL PCMCIA [A] [B] [C]
+		    US Robotics 2410 PCMCIA [A] [B] [C]
+		    US Robotics 2445 PCMCIA [A] [B] [C]
+		PCI Adapters
+		    3Com AirConnect 3CRWE777A PCI
+		    Belkin F5D6000 PCI (a rebadged WL11000P)
+		    Eumitcom WL11000P PCI
+		    Dlink DWL520 PCI
+		    Global Sun Technology GL24110P PCI (untested)
+		    Global Sun Technology GL24110P02 PCI
+		    Intersil Mini-PCI
+		    LinkSys WDT11 PCI (a rebadged GL24110P02)
+		    NDC/Sohoware NCP130 PCI
+		    Netgear MA301 PCI
+		    US Robotics 2415 PCI (rebadged WL11000P)
+	Gigabit Ethernet Adapters
+		Alteon Tigon I/II PCI Gigabit Ethernet boards, including: [A]
+		  [B] [C]
+		    3Com 3c985 and 3c985B
+		    Alteon ACEnic V (fiber and copper)
+		    Digital EtherWORKS 1000SX
+		    Farallon PN9000SX
+		    Netgear GA620 and GA620T
+		    SGI Tigon
+		Intel i82540, i82542, i82543, i82544, i82545, and i82546
+	       	based adapters, including:
+		    Intel PRO/1000 Gigabit Server Adapter (SX Fiber)
+		      (PWLA8490)
+		    Intel PRO/1000F Gigabit Server Adapter (SX Fiber)
+		      (PWLA8490SX)
+		    Intel PRO/1000T Server Adapter (PWLA8490T)
+		    Intel PRO/1000XT Server Adapter (PWLA8490XT)
+		    Intel PRO/1000XS Server Adapter (SX Fiber) (PWLA8490XF)
+		    Intel PRO/1000T Desktop Adapter (PWLA8390T)
+		    Intel PRO/1000XTL Lo Profile PCI Server (PWLA8490XTL)
+		    Intel PRO/1000MT Desktop Adapter (PWLA8390MT)
+		    Intel PRO/1000MT Server Adapter (PWLA8490MT)
+		    Intel PRO/1000MT Dual Port Server Adapter (PWLA8492MT)
+		    Intel PRO/1000MF Server Adapter (SX Fiber) (PWLA8490MF)
+		    Intel PRO/1000MF Dual Port Server Adapter (SX Fiber)
+		      (PWLA8492MF)
+		    Intel PRO/1000MF Server Adapter (LX Fiber) (PWLA8490LX)
+		National Semiconductor DP83280 and DP83281 based PCI
+		adapters, including: [A] [B] [C]
+		    Addtron AEG320T
+		    Asante FriendlyNet GigaNIX 1000TA and 1000TPC
+		    D-Link DGE-500T
+		    LinkSys EG1032 and EG1064
+		    Netgear GA622T
+		    SMC EZ Card 1000
+		    Surecom Technology EP-320G-TX
+		Level1 LXT1001 based adapters (untested), including: [*]
+		    SMC TigerCard 1000
+		    D-Link DGE-500SX
+		Broadcom BCM570x (Tigon3) based PCI adapters, including: [A]
+		  [B] [C]
+		    3Com 3c996-T
+		    3Com 3c996-SX
+		    3Com 3c996B-T
+		    Dell PowerEdge 2550 integrated BCM5700 NIC
+		    IBM xSeries 305 integrated BCM5703X NIC
+		    Netgear GA302T
+		    SysKonnect SK-9D21
+		    SysKonnect SK-9D41
+		Sundance/Tamarack TC9021 based PCI adapters, including: [G]
+		    D-Link DGE-550T (10/100/1000baseTX)
+		    Antares Microsystems Gigabit Ethernet board
+		SysKonnect and Marvell based adapters, including:
+		  [A] [B] [C]
+		    SysKonnect SK-9821 (1000baseT)
+		    SysKonnect SK-9822 (dual 1000baseT)
+		    SysKonnect SK-9841 (1000baseLX)
+		    SysKonnect SK-9842 (dual 1000baseLX)
+		    SysKonnect SK-9843 (1000baseSX)
+		    SysKonnect SK-9844 (dual 1000baseSX)
+		    SysKonnect SK-9521 v2.0 (1000baseT 32-bit)
+		    SysKonnect SK-9821 v2.0 (1000baseT)
+		    SysKonnect SK-9843 v2.0 (1000baseSX)
+		    3Com 3c940 (1000baseT)
+		    D-Link DGE-530T (1000baseT)
+		    Linksys EG1032v2 (1000baseT)
+		    Linksys EG1064v2 (1000baseT)
+		    SMC 9452TX (1000baseT)
+	ATM Adapters
+		Efficient Networks EN-155 and Adaptec ANA-590X ATM
+		interfaces [*]
+	FDDI Adapters
+		Digital DEFEA EISA and PCI FDDI adapters [G]
+	Wan Adapters
+		Lan Media Corporation SSI (T1)/HSSI/DS1/DS3 WAN
+		interfaces [G]
+	Cryptography Accelerators
+		Broadcom Bluesteelnet uBsec 5501, 5601, 5801, 5802, 5805,
+		  5820, 5821, 5822, 5823 [G]
+		Hifn 6500-based boards [G]
+		Hifn 7751/7811/7951/7955/7956-based boards (hifn),
+		  including: [G]
+		    Soekris Engineering vpn1201, vpn1211, vpn1401, and vpn1411
+		    GTGI PowerCrypt Encryption Accelerator
+		    NetSec 7751
+		    Hifn 7751 and 9751 reference boards
+		    Invertex AEON
+		SafeNet SafeXcel 1141/1741 [G]
+	PC Cards (PCMCIA [B] and CardBus [B] [C])
+		ATA cards, including:
+		    ATA/IDE card drives
+		    ATA/IDE CD-ROM adapters
+		    CF/ATA flash cards and disk drives
+		Ethernet adapters, including:
+		    3Com EtherLink and EtherLink XL-based LAN PC
+		    cards, including:
+			3Com 3c556, 3c562
+			3Com 3c574TX, 3c[CX]FE574BT
+			3Com 3c589, 3c589[BCDE]
+			3Com 3c575TX, 3c[CX]FE575[BC]T CardBus
+			3Com 3c[CX]FEM656, 3c[CX]FEM656[BC] CardBus
+		    Intel/DEC 21443 "Tulip" clones, including:
+			ADMtex AN985 Centaur-C CardBus
+			IBM EtherJet 10/100 CardBus
+			SMC EZ CardBus 10/100
+			Xircom X3201 CardBus adapters, including
+			  RealPort models
+		    Intel i8255x-based, including:
+			Intel PRO/100 CardBus II
+		    NE2000-based, including:
+			Accton EN2212, EN2216
+			Allied Telesis LA-PCM
+			AmbiCom AMB8002T
+			Arowana FE
+			Belkin F5D5020
+			Billionton Systems LNT-10TN
+			CNet NE2000
+			Compex Linkport ENET-B
+			Corega PCC-T, PCC-TD, EtherII PCC-T,
+			Corega FastEther PCC-T, FastEther PCC-TX
+			Corega FastEther PCC-TXD, FastEther PCC-TXF
+			D-Link DE-650, DE-660, DE-660+, DFE-670TXD
+			Dayna CommuniCard E
+			Digital DEPCM-XX
+			Dual NE2000
+			Edimax NE2000
+			Genius ME 3000II SE
+			Grey Cell GCS2000 Gold II
+			GVC NIC-2000p, NP0335
+			Hawking PN650TX
+			I-O DATA PCLA, PCLA/TE
+			IC-Card
+			Kingston KNE-PC2
+			Linksys PCMPC100, EC2T Combo, EthernetCard
+			Linksys Combo EthernetCard, Trust Combo EthernetCard
+			Linksys Etherfast 10/100
+			MACNICA ME1 for JEIDA
+			Melco LPC3-TX
+			National Semiconductor InfoMover
+			NDC Instant-Link
+			Netgear FA410TX, FA410TXC, FA411
+			Network Everywhere NP10T
+			New Media LiveWire 10/100
+			Planet SmartCom 2000
+			Planex FNW-3600-T, FNW-3700-T
+			Premax PE-200
+			RPTI EP-400, EP-401
+			Seiko Epson EN10B
+			SMC EZCard, 8041
+			Socket Communications LP-CF, LP-E
+			SVEC PN650TX, ComboCard, LANCard
+			Synergy S21810
+			Tamarack NE2000
+			Telecom Device TCD-HPC100
+			Wisecom T210CT, iPort
+			Xircom CFE-10
+		    RealTek 81[23]9-based, including:
+			Accton MPX5030 CardBus
+			Corega FEther CB-TXD 10/100 Ethernet
+			D-Link DFE-690TXD
+		    SMC 91Cxx-based, including:
+			Megahertz XJEM1144, CC10BT
+			SMC EtherEZ 8020BT
+		    Xircom, including:
+			Xircom CreditCard CE2
+		PCMCIA controllers, including:
+		    Intel i82365 and compatibles
+		SCSI host adapters, including:
+		    Adaptec SlimSCSI APA-14[56]0
+		Serial ports, including:
+		    Most modems, digital cellular modems, and serial
+		    cards should work
+		Wireless Ethernet adapters:
+		    See above
+	Universal Serial Bus (USB) Devices [A] [B] [C]
+		USB Audio [G]
+		USB Diamond Multimedia Rio MP3 players [G]
+		USB Ethernet adapters, see above [G]
+		USB Generic Human Interface Devices (catch-all) [G]
+		USB Handspring Visor [G]
+		USB Hubs
+		USB Keyboards
+		USB Mass Storage devices, i.e., USB floppy drives and
+		  USB memory stick controllers
+		USB Mice [G]
+		USB Modems [G]
+		USB Printers [G]
+		USB Scanners [G]
+		USB-USB cables [G]
+		USB Y@p phone [*]
+	Pointing Devices [G]
+		"Logitech"-style bus mice
+		"Microsoft"-style bus mice
+		"PS/2"-style mice
+		Serial mice (uses serial port driver)
+	Sound Devices [G]
+		AMD 768 and 8111 AC'97
+		C-Media CMI8[37]38
+		Cirrus Logic CrystalClear CS4280, CS4281
+		Ensoniq AudioPCI
+		ESS Tech ES188[78], ES888
+		ESS Solo-1 PCI AudioDrive
+		ESS Maestro 1, 2 and 2E and clones
+		ESS Maestro 3 and Allegro 1
+		Forte Media FM801 audio
+		Gravis Ultrasound and Ultrasound Max
+		Intel i810/i820 and 440MX AC'97
+		NeoMagic 256AV/ZX
+		nVidia nForce and nForce AC'97
+		SiS 7012 AC'97
+		SoundBlaster ISA cards and 100% compatibles
+		SoundBlaster PCI128
+		SoundBlaster Live! and PCI512 (EMU10k1)
+		Trident 4DWAVE-DX/NX and clones (SiS 7018, ALi M5451)
+		VIA VT82C686A SouthBridge integrated AC'97 audio
+		Yamaha OPL3-SA3
+		Yamaha DS-XG
+		Yamaha and Roland ISA/ISA PnP MIDI UART
+		[The following drivers are not extensively tested:]
+		Personal Sound System
+		ProAudio Spectrum
+		S3 SonicVibes
+		Windows Sound System
+	Radio Receiver Devices
+		AIMS Lab Radiotrack FM radio
+		AIMS Lab Radiotrack II FM radio
+		Aztech/PackardBell FM radio
+		Brooktree 848/849/878/879-based TV tuner
+		D-Link DSB-R100 USB radio
+		Forte Media FM801 audio
+		SoundForte RadioLink SF16-FMR FM radio
+		SoundForte RadioLink SF16-FMR2 FM radio
+	Miscellaneous Devices
+		APM power management,
+		Brooktree 8[47][89] based frame grabber and TV tuner cards,
+		including: [G]
+		    Hauppauge Wincast TV
+		    STB TV PCI Television Tuner
+		    Miro PC TV
+		    Intel Smart Video Recorder III
+		    IMS TV Turbo
+		    AVer Media TV/FM
+		Hardware monitoring sensors, including: [G]
+		    National Semiconductor LM78, LM78-J, LM79
+		    Winbond W83697HF, W83627HF, W83627THF, W83781D, W83782D
+		    VIA VT82C686A, VT8231
+		    ITE IT8705F, IT8712F
+		    SiS SiS950
+	Many kinds of ISA Plug-and-Play cards
+		Nearly all SB-style audio cards
+		Nearly all joystick ports
+		Nearly all Yamaha-style audio cards
+		Many NE2000-style Ethernet cards
+		Most serial port or modem cards
+		NE2100 Ethernet cards
+
+Drivers for hardware marked with [G] are only included in the GENERIC
+kernels, but are NOT included on the various distribution floppies
+(including the cd-rom boot image).
+Drivers for hardware marked with [A] are not included in floppy A.
+Drivers for hardware marked with [B] are not included in floppy B.
+Drivers for hardware marked with [C] are not included in floppy C.
+Support for devices marked with [*] is not included in the GENERIC kernel,
+and will require you to compile a custom kernel to enable it.
+
+
+Hardware that we do NOT currently support, but get many questions
+about:
+	NCR 5380-based and 53400-based SCSI host adapters
+	QIC-40 and QIC-80 tape drives (these are the tape drives
+		that connect to the floppy disk controller)
+	Multiprocessor motherboards (though they will run fine using
+		one processor only)
+	Sony and Panasonic proprietary CD-ROM interfaces
+	Parallel-port ZIP drives (SCSI and ATAPI ZIP drives work fine)
+	Intel i82556 (EtherExpress PRO/100A) and i82596 (EtherExpress
+		PRO/10 PCI) Ethernet adapters
+	Hewlett-Packard PC-LAN+ (HP27xxx) Ethernet adapters
+	Aureal Vortex sound cards
+	Winmodems
+	Infrared devices, such as commonly found on laptops
+	Firewire
+	Mylex and Intel RAID controllers
+	PCMCIA:
+		Memory cards
+		Most multifunction cards
+
+We are planning future support for many of these devices.
+
+To be detected by the distributed kernels, some devices must
+be configured with specific settings.  Here's their list:
+
+Device		Name	Port	IRQ	DRQ	Misc
+------		----	----	---	---	----
+Serial ports	pccom0	0x3f8	4		[8250/16450/16550/clones]
+		pccom1	0x2f8	3		[8250/16450/16550/clones]
+		pccom2	0x3e8	5		[8250/16450/16550/clones]
+		ast0	0x1a0	5		[AST 4-port serial card]
+		cy0		12		iomem 0xd4000 [Cyclom
+						serial card]
+
+Parallel ports	lpt0	0x378	7		[interrupt-driven or polling]
+		lpt1	0x278			[polling only]
+		lpt2	0x3bc			[polling only]
+
+MFM/ESDI/IDE/RLL hard disk controllers
+		wdc0	0x1f0	14		[supports two disks or atapi]
+		wdc1	0x170	15		[supports two disks or atapi]
+
+Floppy controller
+		fdc0	0x3f0	6	2	[supports two disks]
+
+AHA-154x, AHA-174x (in compatibility mode), or BT-54x SCSI host adapters
+		aha0	0x330	any	any
+		aha1	0x334	any	any
+
+BT445, BT74x, or BT9xx SCSI host adapters
+		bha0	0x330	any	any
+		bha1	0x334	any	any
+
+Ultrastor 14f, 24f (if it works), or 34f SCSI host adapters
+		uha0	0x330	any	any
+		uha1	0x334	any	any
+
+AHA-152x, AIC-6260- or AIC-6360-based SCSI host adapters
+		aic0	0x340	11	any
+
+Seagate ST0[12], Future Domain TMC-8xx based SCSI controllers
+		sea0		5		iomem 0xc8000
+
+WD7000 and TMC-7000 SCSI host adapters
+		wds0	0x350	15	6
+		wds1	0x358	11	5
+
+SCSI disks	sd0	first SCSI disk (by SCSI id)
+		sd1	second SCSI disk (by SCSI id)
+		sd2	third SCSI disk (by SCSI id)
+		sd3	fourth SCSI disk (by SCSI id)
+
+SCSI tapes	st0	first SCSI tape (by SCSI id)
+		st1	second SCSI tape (by SCSI id)
+
+SCSI CD-ROMs	cd0	first SCSI CD-ROM (by SCSI id)
+		cd1	second SCSI CD-ROM (by SCSI id)
+
+SMC/WD 8003, 8013, Elite16, and Elite16 Ultra Ethernet boards
+		we0	0x280	9		iomem 0xd0000
+		we1	0x300	10		iomem 0xcc000
+
+Novell NE1000, or NE2000 Ethernet boards
+		ne0	0x240	9		iomem 0xd8000
+		ne1	0x300	10
+		ne2	0x280	9
+
+3COM 3c501 Ethernet boards
+		el0	0x300	9
+
+3COM 3c503 Ethernet boards
+		ec0	0x250	9		iomem 0xd8000
+
+3COM 3c505/Etherlink+ Ethernet boards
+		eg0	0x310	5
+
+AT&T StarLAN 10, EN100, or StarLAN Fiber, or 3COM 3c507 Ethernet boards
+		ie0	0x360	7		iomem 0xd0000
+
+EtherExpress boards
+		ie1	0x300	10
+
+IsoLan, NE2100, and DEPCA
+		le0	0x360	15	6
+
+Intel EtherExpress PRO/10
+		ex0	0x320	5
+
+PCI ethernet boards need to have an interrupt, either assigned in your
+PCI BIOS, or autoconfigured.
+
+Hardware not listed in the above table doesn't need any specific
+configuration.
+
+
+Special care for SMC Elite Ultra:
+
+	The Elite Ultra is very sensitive to how its I/O port is treated.
+	Mistreating it can cause a number of effects -- anything from
+	the card not responding when the kernel probes, to the soft
+	configuration being corrupted or wiped completely.
+
+	By default, the kernel ships with device we1 configured for the
+	'default' Elite Ultra locations, comprising of port 0x300, irq 10,
+	and memory location 0xcc000.  This matches a hard coded jumper on
+	the board as well a common soft config setting.
+
+	Unfortunately, the kernel's autoconfiguration process (specifically,
+	some of the devices it probes for) causes conflicts with the SMC
+	Elite Ultra, and very often causes it to lose its configuration and
+	fail its own probe.  If this happens, you must boot the computer
+	into DOS, and run the EzSetup program from SMC (if you do not have
+	a copy on the floppy accompanying your board, you can download it
+	from ftp://ftp.darmstadt.gmd.de/pub/pc/hardware/nic/smc/gez122.exe -
+	it is not available from SMC anymore).  This program will allow you
+	to reconfigure and recover a card that has lost its configuration
+	with a minimum of hassle.
+
+	In order to avoid blowing away the card, one *must* use the
+	run-time kernel configuration system when booting the Install
+	kernel.  This is done by giving the -c flag to the initial boot
+	request.  Following the loading of the kernel, the user is
+	presented with a
+
+	UKC>
+
+	prompt.  At this prompt, a variety of commands may be issued, but
+	the relevant one to getting the SMC Elite Ultra running is
+	'disable'.  The wt0, el0, and ie1 devices all need to be disabled.
+	This is done by typing 'disable' followed by the name of the
+	device, i.e., 'disable wt0', and pressing return.
+
+	If, for some reason, your Elite Ultra is not configured at the
+	'default' location the kernel is expecting it, you may also use
+	the 'change' command in the UKC system to modify where the kernel
+	will look for it.  Typing 'change we1' will allow you to modify
+	those settings.  Note that running the card at an i/o port of
+	anything other then 0x300 at this point is not recommended, and is
+	beyond the scope of this document-- by doing so you risk other
+	device probes wreaking the havoc we are trying to avoid.
+
+	When all three extra devices are disabled and any changes made,
+	the 'quit' command will exit the UKC.  The kernel should then
+	boot, and find your Elite Ultra on device we1.
+
diff --git a/distrib/notes/amd64/install b/distrib/notes/amd64/install
new file mode 100644
index 00000000000..6a2df1a1113
--- /dev/null
+++ b/distrib/notes/amd64/install
@@ -0,0 +1,89 @@
+dnl	$OpenBSD: install,v 1.1 2004/02/07 21:29:10 deraadt Exp $
+OpenBSDInstallPrelude
+
+If OpenBSD will be sharing the disk with DOS or another operating
+system, you should have already completed the section of these notes
+that instructed you on how to prepare your hard disk.  You should know
+the size of the OpenBSD area of the disk and its offset from the
+beginning of the disk.  You will need this information when setting up
+your OpenBSD partitions.  If your BIOS uses translated geometry, you
+should use this geometry for the remainder of the install.  This is
+only necessary if you are sharing the disk with other operating systems
+that use the translated geometry.
+
+There are several ways to install OpenBSD onto a disk.  The easiest way,
+should your computer support it, is to boot off the OpenBSD CD-ROM, or
+off the bootable CD-ROM mini image.  Otherwise, you can boot from a 3.5"
+1.44MB floppy disk if your machine has a floppy drive.
+
+OpenBSDInstallPart2
+
+	With either the CD-ROM or the floppy in the drive, reboot your
+	computer. You might have to play with your BIOS options to let the
+	computer boot from the installation media, rather than the hard
+	disk.
+
+	It will take a while to load the kernel from a floppy or slow
+	speed CD-ROM drive, most likely more than a minute.  If some
+	action doesn't eventually happen, or the spinning cursor has
+	stopped and nothing further has happened, either your boot floppy
+	is bad or you are having hardware problems. If trying another
+	floppy disk doesn't help, try booting after disabling your CPU's
+	internal and external caches (if any).  If it still doesn't work,
+	OpenBSD probably can't be run on your hardware.  This can probably
+	be considered a bug, so you might want to report it.
+	If you do, please {:-include-:} as many details about your system
+	configuration as you can.
+
+
+OpenBSDBootMsgs
+
+	You will next be asked for your terminal type.  You should just
+	hit return to select the default (vt220).
+
+OpenBSDInstallPart3({:- or "wd0" for IDE/RLL/ESDI/ST506 drives-:})
+
+	Next you will have to edit or create a disk label for the disk
+	OpenBSD is being installed on.  If there are any existing
+	partitions defined (for any operating system), and a disk label
+	is not found, you will first be given an opportunity to run
+	fdisk and create an OpenBSD partition.
+
+	If fdisk is being invoked on your behalf, it will start by
+	displaying the current partitions defined and then allow you
+	to modify this information, add new partitions and change
+	which partition to boot from by default.  If you make a mistake,
+	you will be allowed to repeat this procedure as necessary to
+	correct this.  Note that you should make OpenBSD be the active
+	partition at least until the install has been completed.
+
+OpenBSDInstallPart4({:- If you have DOS or Linux partitions
+	defined on the disk, these will usually show up as partition
+	'h', 'i' and so on.-:})
+
+	Note that all OpenBSD partitions in the disk label must have an
+	offset that makes it start within the OpenBSD part of the disk,
+	and a size that keeps it inside of that portion of the disk.  This
+	is within the bounds of the 'c' partition if the disk is not being
+	shared with other operating systems, and within the OpenBSD fdisk
+	partition if the disk is being shared.
+
+OpenBSDInstallPart5(wd0)
+
+OpenBSDInstallNet({:-CD-ROM, -:},nofloppy)
+
+OpenBSDFTPInstall
+
+OpenBSDHTTPInstall
+
+OpenBSDTAPEInstall
+
+OpenBSDCDROMInstall
+
+OpenBSDDISKInstall({:-"wdN" or -:},,{:- or MS-DOS-:})
+
+OpenBSDCommonFS
+
+OpenBSDCommonURL
+
+OpenBSDCongratulations
diff --git a/distrib/notes/amd64/prep b/distrib/notes/amd64/prep
new file mode 100644
index 00000000000..8f017bdc943
--- /dev/null
+++ b/distrib/notes/amd64/prep
@@ -0,0 +1,68 @@
+NOTE: If you wish to install OpenBSD on your whole disk, i.e. you do
+not want DOS or any other operating system to reside on your hard
+disk, you can skip this section and go on to the section that
+describes installation, below.  If you're upgrading your system from a
+previous release of OpenBSD, you should have proceeded directly to the
+section about upgrading; you need none of the information presented
+here.
+
+First and foremost, before beginning the installation process, MAKE
+SURE YOU HAVE A RELIABLE BACKUP of any data on your hard disk that you
+wish to keep.  Repartitioning your hard disk is an excellent way to
+destroy important data.
+
+Second, if you are using a disk controller which supports disk geometry
+translation, be sure to use the same parameters for OpenBSD as for DOS
+or the other operating systems installed on your disk.  If you do not,
+it will be much harder to make OpenBSD properly coexist with them.
+Utilities exist which will print out the disk geometry which DOS sees;
+some versions of DOS "fdisk" also do this.  If you have an "EIDE" hard
+disk, DOS and OpenBSD probably won't see the same geometry, and you must
+be careful to find out the DOS geometry and tell OpenBSD about it during
+the installation.
+
+Third (but related to the second point above), if you are using a hard
+disk with more sectors than DOS or your controller's BIOS supports without
+some kind of software translation utility or other kludge, you MUST
+BE SURE that all partitions which you want to boot from must start and end
+below cylinder 1024 by the BIOS's idea of the disk, and that all DOS
+partitions MUST EXIST ENTIRELY BELOW cylinder 1024, or you will either not
+be able to boot OpenBSD, not be able to boot DOS, or you may experience
+data loss or filesystem corruption.  Be sure you aren't using geometry
+translation that you don't know about, but that the DOS "fdisk" program
+does!
+
+The OpenBSD root partition must also reside completely within the BIOS
+supported part of the hard disk -- this would typically be 504M, 2G or 8G,
+depending upon the age of the machine and its BIOS.  Due to a limit of the
+OpenBSD boot loader, the root partition must be within the first 8G even if
+the BIOS supports more.  Note that only the root partition has this issue,
+once OpenBSD is loaded, the entire disk is available for use.
+
+Fourth, use the other operating system's "fdisk" program or partition
+editor to create at least one of the partitions to be used for that
+operating system.  If that operating system is already set up to use the
+entire disk, you will have to back it up, remove and recreate a smaller
+partition for it, and then restore the data from that partition.  You do
+not have to create an OpenBSD partition at this time, the OpenBSD install-
+ation will give you an opportunity to create the partition needed for
+OpenBSD.
+
+Finally, do whatever is necessary to restore order to the partition
+you took space away from.  If it was a DOS partition, you probably
+will need to use "format" to create a new file system on it, and then
+restore your important files from your backups.  Other operating
+systems will have different needs; most will need to reformat the
+partition, and if it was their "main" partition, will probably need
+to be reinstalled.
+
+Once you've backed all your data up, there is a tool called fips 2.0
+that can shrink your FAT-based DOS/Windows partition to make room for
+OpenBSD.  It is included in the MACHINE tools area of this distribution as
+a convenience.  It is strongly advised that you read its documentation
+and understand the consequences of your actions before using it.  In some
+cases, defragmenting your disk and running fips may be much faster than
+reinstalling your DOS partition from the backup.
+
+Your hard disk is now prepared to have OpenBSD installed on it, and
+you should proceed with the installation instructions.
diff --git a/distrib/notes/amd64/upgrade b/distrib/notes/amd64/upgrade
new file mode 100644
index 00000000000..48e2b2689c4
--- /dev/null
+++ b/distrib/notes/amd64/upgrade
@@ -0,0 +1,103 @@
+dnl	$OpenBSD: upgrade,v 1.1 2004/02/07 21:29:10 deraadt Exp $
+dnl OpenBSDUpgrade({:-the CD-ROM or an installation floppy as you would do for
+dnl a new installation-:})
+Due to the change from a.out to ELF binary format in OpenBSD OSREV,
+upgrades can be a complex, delicate process. The best solution, whenever
+possible, is to backup your data and reinstall from scratch.
+
+The second best solution is to remove all ports, third party programs and
+libraries installed on your system; upgrade; and then add ELF versions of
+the removed files.
+
+In all cases, once you start the upgrade you MUST complete it. If the
+upgrade process fails or is abandoned before it completes you will almost
+certainly be left with a non-functional system.
+
+Finally, you cannot use the bsd.rd kernel to upgrade the system. The
+existing bootblocks on your system cannot boot the OSREV bsd.rd.
+
+If you must do an upgrade while preserving the functionality of any
+existing a.out binary files, then the rest of this section will guide you
+through that process.
+
+The two main hurdles in upgrading from an a.out system to an ELF OpenBSD
+OSREV system while preserving the functioning of a.out binaries are:
+- the a.out binary emulation, required for compatibility with a.out
+  binaries using shared libraries, is not enabled by default, and requires
+  an explicit configuration change.
+- a.out shared libraries (lib*.so) need to be moved to a specific location
+  for proper operation of older binaries.
+
+Before you start the upgrade process, the a.out emulation area needs to be
+set up. It needs to be put inside a /emul/a.out hierarchy. This directory can,
+however, be a symbolic link, should the available space in the root partition
+not be enough.
+
+It is recommended that the following instructions and commands are issued in
+single-user mode.
+
+The /emul/a.out hierarchy should be populated by the a.out shared libraries.
+An easy way to do it is to run the following commands as root:
+
+   mkdir -p /emul/a.out/var/run
+   tar cf - /sbin/ldconfig /usr/bin/ldd /usr/libexec/ld.so |
+       tar -C /emul/a.out -xpf -
+   for lib in $(/sbin/ldconfig -r |
+     awk '/=>/ { print $3 }');
+   do
+     dirname $lib;
+   done | sort -u > /root/a.out-libdirs
+   tar cf - $(find $(< /root/a.out-libdirs) -name "lib*.so.*") |
+       tar -C /emul/a.out -xpf -
+
+Then, a cache of these shared libraries must be generated with:
+
+   cp /var/run/ld.so.hints /var/run/ld.so.hints.backup
+   /sbin/ldconfig -s $(/usr/bin/sed 's,^/,/emul/a.out/,' /root/a.out-libdirs) 
+   /bin/mv /var/run/ld.so.hints /emul/a.out/var/run
+   /bin/mv /var/run/ld.so.hints.backups /var/run/ld.so.hints
+
+The last step before the upgrade is to enable the a.out emulation, in
+order to be sure that /etc/rc.local or any other customization you have
+made to the system will still run:
+
+  echo "kern.emul.aout=1" >> /etc/sysctl.conf
+
+
+ATTENTION! Several configuration files under /etc, such as /etc/login.conf,
+will refer to existing a.out binaries. DO NOT UPGRADE YOUR SYSTEM UNLESS
+YOU HAVE ENABLED A.OUT EMULATION FIRST! After you merge configuration files
+changes and replace or remove your existing a.out binaries, it will be
+possible to disable a.out emulation.
+
+
+The upgrade is now possible. Boot from the CD-ROM or an installation
+floppy, as you would do for a new installation. 
+
+When prompted, select the (U)pgrade option rather than the (I)nstall
+option at the prompt in the install process.
+
+The upgrade script will ask you for the existing root partition, and
+will use the existing filesystems defined in /etc/fstab to install the
+new system in. It will also use your existing network parameters.
+
+From then, the upgrade procedure is very close to the installation
+procedure described earlier in this document. Note that the upgrade
+procedure will not let you pick the ``etc{:--:}OSrev.tgz'' set, so as to
+preserve your files in `/etc' which you are likely to have customized
+since a previous installation.
+
+When the upgrade procedure tells you that the upgrade is complete, do not
+reboot the system yet.
+
+However, it is strongly advised that you unpack the etc{:--:}OSrev.tgz set in
+a temporary directory and merge changes by hand, since all components of
+your system may not function correctly until your files in `/etc' are
+updated.
+
+After the upgrade is completed, it is now possible to remove the old a.out
+shared libraries from their initial locations:
+
+  rm -f $(file $(find $(< /root/a.out-libdirs) -name "lib*.so.*") |
+    awk -F: '/demand paged/ { print $1 }')
+  rm -f /root/a.out-libdirs
diff --git a/distrib/notes/amd64/whatis b/distrib/notes/amd64/whatis
new file mode 100644
index 00000000000..15bbdcc830c
--- /dev/null
+++ b/distrib/notes/amd64/whatis
@@ -0,0 +1,5 @@
+dnl	$OpenBSD: whatis,v 1.1 2004/02/07 21:29:10 deraadt Exp $
+For the MACHINE, OpenBSD OSREV brings greater stability and security,
+including a stricter memory permission scheme. As a side effect of the
+full security audit, many userland programs have been significantly
+cleaned up and debugged.
diff --git a/distrib/notes/amd64/xfer b/distrib/notes/amd64/xfer
new file mode 100644
index 00000000000..9432057b87f
--- /dev/null
+++ b/distrib/notes/amd64/xfer
@@ -0,0 +1,28 @@
+dnl	$OpenBSD: xfer,v 1.1 2004/02/07 21:29:10 deraadt Exp $
+Installation is supported from several media types, including:
+
+	CD-ROM
+	FFS partitions
+	DOS (FAT) partitions
+	EXT2 partitions
+	Tape
+dnl	Remote NFS partition
+	FTP
+	HTTP
+
+If you can't (or don't want to) boot off a CD-ROM, you'll need to have
+a floppy disk (1.44MB required).
+
+OpenBSDXferFloppyFromDOS
+
+OpenBSDXferFloppyFromUNIX
+
+
+OpenBSDXferShortPrelude
+
+
+OpenBSDXferBareTape(xbase xfont xlink xserv xshare)
+
+dnl OpenBSDXferNFS
+dnl
+OpenBSDXferFFS