remove an unused install.sub file, standard one has been used on macppc

for several months.

2 files changed, 1 insertions, 2073 deletions

diff --git a/distrib/macppc/ramdisk/install.sub b/distrib/macppc/ramdisk/install.sub
deleted file mode 100644
index 9e85b127e07..00000000000
--- a/distrib/macppc/ramdisk/install.sub
+++ /dev/null
@@ -1,2071 +0,0 @@
-#!/bin/sh
-#	$OpenBSD: install.sub,v 1.2 2001/09/19 00:04:02 krw Exp $
-#	$NetBSD: install.sub,v 1.5.2.8 1996/09/02 23:25:02 pk Exp $
-#
-# Copyright (c) 1997,1998 Todd Miller, Theo de Raadt
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-#    must display the following acknowledgement:
-#	This product includes software developed by Todd Miller and
-#	Theo de Raadt
-# 4. The name of the author may not be used to endorse or promote products
-#    derived from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-# Copyright (c) 1996 The NetBSD Foundation, Inc.
-# All rights reserved.
-#
-# This code is derived from software contributed to The NetBSD Foundation
-# by Jason R. Thorpe.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-#    must display the following acknowledgement:
-#        This product includes software developed by the NetBSD
-#        Foundation, Inc. and its contributors.
-# 4. Neither the name of The NetBSD Foundation nor the names of its
-#    contributors may be used to endorse or promote products derived
-#    from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
-# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
-# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-
-#	OpenBSD installation/upgrade script - common subroutines.
-
-ROOTDISK=""				# filled in below
-VERSION=
-VERSION_MAJOR=$(( $VERSION / 10 ))
-VERSION_MINOR=$(( $VERSION % 10 ))
-export VERSION VERSION_MAJOR VERSION_MINOR
-
-ALLSETS="base etc misc comp man game xbase xshare xfont xserv"	# install
-UPGRSETS="base misc comp man game xbase xshare xfont xserv"	# upgrade
-SNAPSETS="bin dev etc games man misc sbin \
-	  usr.bin usr.binutils usr.games usr.include \
-	  usr.lib usr.libexec usr.misc usr.sbin usr.share var"
-THESETS=					# one of the above
-
-local_sets_dir=""			# Path searched for sets by install_sets
-					# on the local filesystems
-
-# decide upon an editor
-if [ X$EDITOR = X ]; then
-	if [ -x /usr/bin/vi ]; then
-		EDITOR=vi
-	else
-		EDITOR=ed
-	fi
-	export EDITOR
-fi
-
-# Please don't use the 1 of n form below, good idea, wrong implementation!
-# get a reponse with default[s]
-getresp() {
-	set -o noglob
-	valid="false"
-	while [ "X$valid" = "Xfalse" ]; do
-		read resp
-		if [ "X$resp" = "X" ]; then
-			resp=$1
-		fi
-		if [ $# -gt 1 ]; then
-			for i in $@; do
-				if [ "X$resp" = "X$i" ]; then
-					valid="true"
-				fi
-			done
-		else
-			valid="true"
-		fi
-		if [ "X$valid" = "Xfalse" ]; then
-			echo "Try again: Enter one of [$@] "
-		fi
-	done	
-	set +o noglob
-}
-
-isin() {
-# test the first argument against the remaining ones, return succes on a match
-	local	_a
-
-	_a=$1; shift
-	while [ $# != 0 ]; do
-		if [ "$_a" = "$1" ]; then return 0; fi
-		shift
-	done
-	return 1
-}
-
-addel() {
-# add first argument to list formed by the remaining arguments
-# adds to the tail if the element does not already exist
-	local	_a
-	local	_seen
-
-	_seen=""
-	_a=$1; shift
-	while [ $# != 0 ]; do
-		echo "$1"
-		if [ "$_a" = "$1" ]; then
-			_seen="yes"
-		fi
-		shift
-	done
-	if [ "X$_seen" = "X" ]; then
-		echo "$_a"
-	fi
-}
-
-rmel() {
-# remove first argument from list formed by the remaining arguments
-	local	_a
-
-	_a=$1; shift
-	while [ $# != 0 ]; do
-		if [ "$_a" != "$1" ]; then
-			echo "$1"
-		fi
-		shift
-	done
-}
-
-cutword () {
-# read a line of data, return Nth element.
-	local _a
-	local _n
-	local _oifs
-
-	# optional field separator
-	_oifs="$IFS"
-	case "$1" in
-		-t?*) IFS=${1#-t}; shift;;
-	esac
-
-	_n=$1
-	read _a; set -- $_a
-	IFS="$_oifs"
-	if [ "$1" = "" ]; then return; fi
-	eval echo \$$_n
-}
-
-cutlast () {
-# read a line of data, return last element. Equiv. of awk '{print $NF}'.
-	local _a
-	local _oifs
-
-	# optional field separator
-	_oifs="$IFS"
-	case "$1" in
-		-t?*) IFS=${1#-t}; shift;;
-	esac
-
-	read _a; set -- $_a
-	IFS="$_oifs"
-	if [ "$1" = "" ]; then return; fi
-	while [ "$#" -gt 10 ]; do shift 10; done
-	eval echo \$$#
-}
-
-firstchar () {
-# return first character of argument
-	local _a
-	_a=$1
-	while [ ${#_a} != 1 ]; do
-		_a=${_a%?}
-	done
-	echo $_a
-}
-
-basename () {
-	local _oifs
-	if [ "$1" = "" ]; then return; fi
-	_oifs="$IFS"
-	IFS="/"
-	set -- $1
-	IFS="$_oifs"
-	while [ "$#" -gt 10 ]; do shift 10; done
-	eval echo \$$#
-}
-
-dir_has_sets() {
-	# return true when the directory $1 contains a set for $2...$n
-	local _dir
-	local _file
-
-	_dir=$1; shift
-	for _file in $*
-	do
-		if [ -f $_dir/${_file}${VERSION}.tar.gz ]; then
-			return 0
-		fi
-		# Try for stupid msdos convention
-		if [ -f $_dir/${_file}${VERSION}.tgz ]; then
-			return 0
-		fi
-		# Special check for kernel
-		if [ $_file = "kernel" -a -f $_dir/bsd ]; then
-			return 0
-		fi
-	done
-	return 1
-}
-
-list_has_sets() {
-	# return true when the list $1 contains a set, given dir $2 for $3...$n
-	local _list
-	local _file
-
-	_list=$1; shift
-	for _file in $*
-	do
-		if isin ${_file}${VERSION}.tar.gz $_list; then
-			return 0
-		fi
-		# Try for stupid msdos convention
-		if isin ${_file}${VERSION}.tgz $_list; then
-			return 0
-		fi
-		# Special check for kernel
-		if test $_file = "kernel" && isin bsd $_list; then
-			return 0
-		fi
-	done
-	return 1
-}
-
-ftp_list_files() {
-	# log in via ftp to host $1 as user $2 with password $3
-	# and return a list of all files in the directory $4 on stdout
-	local _host
-	local _user
-	local _pass
-	local _dir
-
-	_host=$1; shift
-	_user=$1; shift
-	_pass=$1; shift
-	_dir=$1; shift
-
-	ftp ${_ftp_active} -V -n $_host  <<__ptf
-user $_user $_pass
-cd $_dir
-ls
-quit
-__ptf
-}
-
-twiddle() {
-# spin the propeller so we don't get bored
-	while : ; do  
-		sleep 1; echo -n "/";
-		sleep 1; echo -n "-";
-		sleep 1; echo -n "\\";
-		sleep 1; echo -n "|";
-	done > /dev/tty & echo $!
-}
-
-get_localdir() {
-	# $1 is relative mountpoint
-	local _mp
-	local _dir
-
-	_mp=$1
-	_dir=
-	while : ; do
-	    echo -n "Enter the pathname where the sets are stored [$_dir] "
-	    getresp "$_dir"
-	    _dir=$resp
-
-	    # Allow break-out with empty response
-	    if [ -z "$_dir" ]; then
-		echo -n "Are you sure you don't want to set the pathname? [n] "
-		getresp "n"
-		case "$resp" in
-			y*|Y*)
-				break
-				;;
-			*)
-				continue
-				;;
-		esac
-	    fi
-
-	    if dir_has_sets "$_mp/$_dir" $THESETS
-	    then
-		local_sets_dir="$_mp/$_dir"
-		break
-	    else
-		cat << __get_reldir_1
-The directory \"$local_sets_dir\" does not exist, or does not hold any of the
-upgrade sets.
-__get_reldir_1
-		echo -n "Re-enter pathname? [y] "
-		getresp "y"
-		case "$resp" in
-			y*|Y*)
-				;;
-			*)
-				local_sets_dir=""
-				break
-				;;
-		esac
-	    fi
-	done
-}
-
-getanotherdisk() {
-	cat << \__getanotherdisk_1
-
-Now you can select another disk to initialize.  (Do not re-select a disk
-you have already entered information for).  Available disks are:
-
-__getanotherdisk_1
-	_DKDEVS=`md_get_diskdevs`
-	echo	"$_DKDEVS"
-	echo	""
-	echo -n	"Which one? [done] "
-	getresp ""
-	if [ "X${resp}" = "X" ]; then
-		DISK=done
-	elif isin $resp $_DKDEVS ; then
-		DISK="$resp"
-	else
-		echo ""
-		echo "The disk $resp does not exist."
-		DISK=""
-	fi
-}
-
-getrootdisk() {
-	cat << \__getrootdisk_1
-
-The installation program needs to know which disk to consider the root disk.
-Note the unit number may be different than the unit number you used in the
-boot program (especially on a PC with multiple disk controllers).
-Available disks are:
-
-__getrootdisk_1
-	local _defdsk;
-
-	_DKDEVS=`md_get_diskdevs`
-	_defdsk=`echo $_DKDEVS | cutlast`
-	if [ "${_defdsk}" != "${_DKDEVS}" ]; then
-		_defdsk=""
-	fi
-	echo	"$_DKDEVS"
-	echo	""
-	echo -n "Which disk is the root disk [${_defdsk}]? "
-	getresp "${_defdsk}"
-	if isin $resp $_DKDEVS ; then
-		ROOTDISK="$resp"
-	else
-		echo ""
-		echo "The disk $resp does not exist."
-		ROOTDISK=""
-	fi
-}
-
-labelmoredisks() {
-	cat << \__labelmoredisks_1
-
-You may label the following disks:
-
-__labelmoredisks_1
-	echo "$_DKDEVS"
-	echo	""
-	echo -n	"Label which disk? [done] "
-	getresp "done"
-	case "$resp" in
-		done)
-			;;
-
-		*)
-			if isin $resp $_DKDEVS ; then
-				md_labeldisk $resp
-			else
-				echo ""
-				echo "The disk $resp does not exist."
-			fi
-			;;
-	esac
-}
-
-addhostent() {
-	# $1 - IP address
-	# $2 - symbolic name
-
-	# Create an entry in the hosts table.  If no host table
-	# exists, create one.  If the IP address already exists,
-	# replace its entry.
-	if [ ! -f /tmp/hosts ]; then
-		echo "127.0.0.1 localhost" > /tmp/hosts
-	fi
-
-	sed "/^$1 /d" < /tmp/hosts > /tmp/hosts.new
-	mv /tmp/hosts.new /tmp/hosts
-
-	echo "$1 $2 $2.$FQDN" >> /tmp/hosts
-}
-
-addifconfig() {
-	# $1 - interface name
-	# $2 - interface symbolic name
-	# $3 - interface IP address
-	# $4 - interface netmask
-	# $5 - (optional) interface link-layer directives
-
-	# Create a hostname.* file for the interface.
-	echo "inet $2 $4 NONE $5" > /tmp/hostname.$1
-
-	addhostent $3 $2
-}
-
-configurenetwork() {
-	local _ifsdone
-	local _ifs
-	local _ouranswer
-	local _reprompt
-
-	_IFS=`md_get_ifdevs`
-	_ifsdone=""
-	_ouranswer=""
-	_reprompt=1
-	resp=""		# force at least one iteration
-	while [ "X${resp}" != X"done" ]; do
-		if [ $_reprompt = 1 ]; then
-			cat << \__configurenetwork_1
-
-You may configure the following network interfaces (the interfaces
-marked with [X] have been successfully configured):
-
-__configurenetwork_1
-
-			for _ifs in $_IFS; do
-				if [ "X${_ouranswer}" = "X" ]; then
-					_ouranswer=$_ifs
-				fi
-				if isin $_ifs $_ifsdone ; then
-					echo -n "	[X] "
-				else
-					echo -n "	[ ] "
-				fi
-				echo $_ifs
-			done
-			echo	""
-		fi
-		echo -n	"Configure which interface? (or, enter 'done') [$_ouranswer] "
-		getresp "$_ouranswer"
-		case "$resp" in
-		"done")
-			;;
-		"")
-			_reprompt=0
-			;;
-		*)
-			_ifs=$resp
-			if isin $_ifs $_IFS ; then
-				if configure_ifs $_ifs ; then
-					_ifsdone="$_ifs $_ifsdone"
-				fi
-			else
-				echo "Invalid response: \"$resp\" is not in list"
-			fi
-			_ouranswer="done"
-			_reprompt=1
-			;;
-		esac
-
-	done
-}
-
-configure_ifs() {
-
-	local _up
-	local _interface_name
-	local _interface_ip
-	local _interface_mask
-	local _interface_symname
-	local _interface_extra
-	local _hostname
-
-	_interface_name=$1
-
-	set -- `ifconfig $_interface_name | sed -n '
-		1s/.*<UP,.*$/UP/p
-		1s/.*<.*>*$/DOWN/p
-		2s/inet//
-		2s/--> [0-9.][0-9.]*//
-		2s/netmask//
-		2s/broadcast//
-		2p'`
-
-	_up=$1
-	_interface_ip=$2
-	_interface_mask=$3
-
-	# Get IP address
-	resp=""		# force one iteration
-	while [ "X${resp}" = X"" ]; do
-		echo -n "IP address? [$_interface_ip] "
-		getresp "$_interface_ip"
-		_interface_ip=$resp
-	done
-
-	# Get symbolic name
-	_hostname=`hostname`
-	resp=""		# force one iteration
-	while [ "X${resp}" = X"" ]; do
-		echo -n "Symbolic (host) name? [$_hostname] "
-		getresp "$_hostname"
-		_interface_symname=$resp
-	done
-
-	# Get netmask
-	resp=""
-	if [ "X${_interface_mask}" = X"" ]; then
-		_interface_mask=255.255.255.0
-	fi
-	while [ "X${resp}" = X"" ]; do
-		echo -n "Netmask ? [$_interface_mask] "
-		getresp "$_interface_mask"
-		_interface_mask=$resp
-	done
-
-	echo "Your network interface might require additional link-layer"
-	echo "directives (like \`link0'). If this is the case you can enter"
-	echo "these at the next prompt.  Values used by some drivers are:"
-	echo "    -link0            BNC"
-	echo "    link0 -link1      AUI"
-	echo "    link0 link1       UTP"
-	echo "(But please keep in mind not all drivers use flags like this)."
-	echo -n "Additional link-layer arguments? [$_interface_extra] "
-	getresp "$_interface_extra"
-	if [ "X${resp}" != X"" ]; then
-		_interface_extra=$resp
-	fi
-
-	# Configure the interface.  If it
-	# succeeds, add it to the permanent
-	# network configuration info.
-	if [ $_up != "UP" ]; then
-		ifconfig ${_interface_name} down
-		if ifconfig ${_interface_name} inet \
-		    ${_interface_ip} \
-		    netmask ${_interface_mask} ${_interface_extra} up ; then
-			addifconfig \
-			    ${_interface_name} \
-			    ${_interface_symname} \
-			    ${_interface_ip} \
-			    ${_interface_mask} "${_interface_extra}"
-			return 0
-		fi
-	else
-		echo "Interface ${_interface_name} is already active."
-		echo "Just saving configuration on new root filesystem."
-		addifconfig \
-		    ${_interface_name} \
-		    ${_interface_symname} \
-		    ${_interface_ip} \
-		    ${_interface_mask} "${_interface_extra}"
-	fi
-	return 1
-}
-
-# Much of this is gratuitously stolen from /etc/netstart.
-enable_network() {
-
-	# Set up the hostname.
-	if [ ! -f /mnt/etc/myname ]; then
-		echo "ERROR: no /etc/myname!"
-		return 1
-	fi
-	hostname=`cat /mnt/etc/myname`
-	hostname $hostname
-
-	# configure all the interfaces which we know about.
-(
-	tmp="$IFS"
-	IFS="$IFS."
-	set -- `echo /mnt/etc/hostname*`
-	IFS=$tmp
-	unset tmp
-
-	while [ $# -ge 2 ] ; do
-		shift		# get rid of "hostname"
-		(
-			read af name mask bcaddr extras
-			read dt dtaddr
-
-			if [ ! -n "$name" ]; then
-		    echo "/etc/hostname.$1: invalid network configuration file"
-				exit
-			fi
-
-			cmd="ifconfig $1 $af $name "
-			if [ "${dt}" = "dest" ]; then cmd="$cmd $dtaddr"; fi
-			if [ -n "$mask" ]; then cmd="$cmd netmask $mask"; fi
-			if [ -n "$bcaddr" -a "X$bcaddr" != "XNONE" ]; then
-				cmd="$cmd broadcast $bcaddr";
-			fi
-			cmd="$cmd $extras"
-
-			$cmd
-		) < /mnt/etc/hostname.$1
-		shift
-	done
-)
-
-	# set the address for the loopback interface
-	ifconfig lo0 inet localhost
-
-	# use loopback, not the wire
-	route add $hostname localhost
-
-	# /etc/mygate, if it exists, contains the name of my gateway host
-	# that name must be in /etc/hosts.
-	if [ -f /mnt/etc/mygate ]; then
-		route delete default > /dev/null 2>&1
-		route add default `cat /mnt/etc/mygate`
-	fi
-
-	# enable the resolver, if appropriate.
-	if [ -f /mnt/etc/resolv.conf ]; then
-		_resolver_enabled="TRUE"
-		cp /mnt/etc/resolv.conf /tmp/resolv.conf.shadow
-	fi
-
-	# Display results...
-	echo	"Network interface configuration:"
-	ifconfig -a
-
-	echo	""
-
-	if [ "X${_resolver_enabled}" = X"TRUE" ]; then
-		route show
-		echo	""
-		echo	"Resolver enabled."
-	else
-		route -n show
-		echo	""
-		echo	"Resolver not enabled."
-	fi
-
-	return 0
-}
-
-# Print the selector and get a response
-# The list of sets is passed in as $1, sets $resp 
-get_selection() {
-	local _next
-	local _f
-	local _sets
-
-	_sets=$1
-	_next=""
-	for _f in $_sets ; do
-		if isin $_f $_setsdone ; then
-			echo -n "	[X] "
-			_next=""
-		else
-			echo -n "	[ ] "
-			if [ -z "$_next" ]; then
-			    _next=$_f
-			fi
-		fi
-		echo $_f
-	done
-
-	# Get the name of the file.
-	echo -n "File name [$_next]? "
-	getresp "$_next"
-}
-
-install_url() {
-# Get several parameters from the user, and xfer
-# files from the server.
-# Note:	_ftp_server_ip, _ftp_server_dir, _ftp_server_login,
-#	_ftp_server_password, and _ftp_active must be global.
-
-local _sets
-local _kernel
-local _f
-local _file_list
-local _get_files
-local _failed_files
-local _osetsdone
-local _url_type
-local _url_base
-local _tfile
-local _matched
-local _action
-
-# Is this an ftp or http install?
-_url_type=$1; shift
-
-echo
-echo "This is an automated ${_url_type}-based installation process.  You will be asked"
-echo "questions and then the files will be retrieved iteratively via ftp(1)."
-echo
-    
-# Proxy the connections?
-if [ "X${_proxy_host}" = X"" ]; then
-	_proxy_host=none
-fi
-echo -n "HTTP/FTP proxy URL? (if you use a proxy) [${_proxy_host}] "
-getresp "${_proxy_host}"
-if [ "X${resp}" = X"none" ]; then
-	unset _proxy_host ftp_proxy http_proxy
-else
-	_proxy_host=$resp
-	export ftp_proxy=${_proxy_host}
-	export http_proxy=${_proxy_host}
-fi
-if [ "${_url_type}" = "ftp" -a "X$ftp_proxy" = "X" ]; then
-	# Use active mode ftp? (irrelevant if using a proxy)
-	case "${_ftp_active}" in
-		-A)	resp=y ;;
-		*)	resp=n ;;
-	esac
-	echo "By default, ftp will attempt a passive connection and fall back to a normal"
-	echo "(active) connection if that doesn't work.  However, there are some very"
-	echo "old ftp servers that claim to support passive mode, but really do not."
-	echo "In this case, you should explicately request an active session."
-	echo -n "Do you want to use active ftp? [${resp}] "
-	getresp "${resp}"
-	case "$resp" in
-		y*|Y*)	_ftp_active=-A ;;
-		*)	unset _ftp_active ;;
-	esac
-fi
-
-# Provide a list of possible servers
-echo -n "Do you want a list of potential ${_url_type} servers? [y] "
-getresp "y"
-case "$resp" in
-n*|N*) ;;
-*)
-	ftp ${_ftp_active} -V -a -o - ftp://ftp.openbsd.org/pub/OpenBSD/${VERSION_MAJOR}.${VERSION_MINOR}/ftplist | grep "^${_url_type}:"
-	;;
-esac
-
-# Get server IP address
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	eval echo -n "Server IP address or hostname? [\$_${_url_type}_server_ip]\ "
-	eval getresp "\$_${_url_type}_server_ip"
-	eval _${_url_type}_server_ip=$resp
-done
-
-# Get server directory
-if [ "${_url_type}" = "ftp" -a "X${_ftp_server_dir}" = X"" ]; then
-	# Default ftp dir
-	_ftp_server_dir="pub/OpenBSD/${VERSION_MAJOR}.${VERSION_MINOR}/${ARCH}"
-fi
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	eval echo -n "Server directory? [\$_${_url_type}_server_dir]\ "
-	eval getresp "\$_${_url_type}_server_dir"
-	eval _${_url_type}_server_dir=$resp
-done
-
-if [ "${_url_type}" = "ftp" ]; then
-	# Need default values even if we proxy ftp...
-	if [ "X${_ftp_server_login}" = X"" ]; then
-		_ftp_server_login=anonymous
-	fi
-	if [ "X${_ftp_server_password}" = X"" ]; then
-		_ftp_server_password=root@`hostname`.${FQDN}
-	fi
-
-	# Get login name
-	resp=""		# force one iteration
-	while [ "X${resp}" = X"" ]; do
-		echo -n "Login? [${_ftp_server_login}] "
-		getresp "${_ftp_server_login}"
-		_ftp_server_login=$resp 
-	done
-
-	# Get password unless anonymous
-	if [ ${_ftp_server_login} != "anonymous" ]; then
-		resp=""		# force one iteration
-		while [ "X${resp}" = X"" ]; do
-			echo -n "Password (will not echo): "
-			stty -echo
-			getresp "${_ftp_server_password}"
-			stty echo
-			echo ""
-			_ftp_server_password=$resp
-
-			echo -n "Password (again): "
-			stty -echo
-			getresp "${_ftp_server_password}"
-			stty echo
-			echo ""
-			if [ "${_ftp_server_password}" != "${resp}" ]; then
-				echo "Passwords do not match, try again."
-				resp=""
-			fi
-		done
-	else
-		# only used by ftp_list_files()
-		_ftp_server_password=root@`hostname`.${FQDN}
-	fi
-fi
-
-# Build up the base url since it is so nasty...
-if [ "${_url_type}" = "ftp" -a "${_ftp_server_login}" != "anonymous" ]; then
-	eval _url_base=${_url_type}://${_ftp_server_login}:${_ftp_server_password}@\$_${_url_type}_server_ip/\$_${_url_type}_server_dir
-else
-	eval _url_base=${_url_type}://\$_${_url_type}_server_ip/\$_${_url_type}_server_dir
-fi
-
-# Get list of files from the server.
-# XXX - check for nil $_file_list and deal
-if [ "${_url_type}" = "ftp" -a "X${ftp_proxy}" = X"" ]; then
-	_file_list=`ftp_list_files "$_ftp_server_ip" "$_ftp_server_login" "$_ftp_server_password" "$_ftp_server_dir"`
-else
-	# Assumes index file is "index.txt" for http (or proxy)
-	# We can't use index.html since the format is server-dependent
-	_file_list=`ftp -o - -V ${_url_base}/index.txt | sed 's/
//'`
-fi
-
-_sets=""
-if list_has_sets "$_file_list" $THESETS; then
-	for _f in $THESETS ; do
-		if [ "X${_f}" = "Xkernel" ]; then
-			if isin bsd $_file_list; then
-				_kernel=bsd
-			fi
-		elif isin ${_f}${VERSION}.tar.gz $_file_list; then
-			_sets="$_sets ${_f}${VERSION}.tar.gz"
-		elif isin ${_f}${VERSION}.tgz $_file_list; then
-			_sets="$_sets ${_f}${VERSION}.tgz"
-		fi
-	done
-else
-	eval echo "There are no OpenBSD install sets available in \"\$_${_url_type}_server_dir\"."
-	echo -n "Search for *.tar.gz and *.tgz files? [y] "
-	getresp "y"
-	case "$resp" in
-		n*|N*)	return ;;
-		*)	;;
-	esac
-	# *.tar.gz and *.tgz are possible sets
-	_sets=""
-	_kernel=""
-	for _f in ${_file_list} ; do
-		case "$_f" in
-		    *.tar.gz|*.tgz)	_sets="$_sets ${_f}"
-		esac
-	done
-	if [ "X${_sets}" = X"" ]; then
-		echo "There are no *.tar.gz or *.tgz files in that dir."
-		echo -n "See a directory listing? [y] "
-		getresp "y"
-		case "$resp" in
-			n*|N*)	return ;;
-			*)	;;
-		esac
-		echo ""
-		echo "${_file_list}"
-		echo ""
-		return
-	else
-		echo "Adding *.tar.gz and *.tgz files to selector."
-	fi
-fi
-
-# Yes, all those blackslashes really are necesary...
-eval echo "\\\\n"\
-"You will now be asked for files to extract.  In addition to the\\\\n"\
-"files listed in the selector you may enter any file located at\\\\n"\
-"\$_${_url_type}_server_ip:\$_${_url_type}_server_dir.  You can also enter\\\\n"\
-"'all' to install all the standard sets, or 'list' to list the\\\\n"\
-"files avilable at \$_${_url_type}_server_ip:\$_${_url_type}_server_dir.\\\\n"\
-"When you are done selecting files, enter 'done'.\\\\n"\
-"Some of these sets are required for your ${MODE} and some are optional --\\\\n"\
-"You will want at least the base and bsd sets.\\\\n"\
-"Consult the installation notes if you are not sure which sets are required!"
-_osetsdone="$_setsdone"
-# Set a minimal default
-for _f in $_sets $_kernel; do
-	case "$_f" in
-		base*.tar.gz|base*.tgz|etc*.tar.gz|etc*.tgz|bsd|bsdofw)
-			if ! isin ${_f} ${_setsdone}; then
-				_get_files=`addel ${_f} ${_get_files}`
-				_setsdone=`addel ${_f} ${_setsdone}`
-			fi
-			;;
-	esac
-done
-
-# Allow the user to select/de-select additional sets
-while : ; do
-	echo ""
-	echo "The following sets are available for extraction."
-	echo "Enter filename, \`list', \`all', or \`done'."
-	echo "You may de-select a set by prepending a '-' to its name."
-	echo ""
-	get_selection "$_sets $_kernel"
-
-	if [ "X${resp}" = X"done" ]; then
-		break
-	elif [ "X${resp}" = X"list" ]; then
-		echo ""
-		eval echo "\$_${_url_type}_server_dir:"
-		echo "${_file_list}"
-		continue
-	elif [ "X${resp}" = X"all" ]; then
-		_get_files="$_sets $_kernel"
-		_setsdone="$_sets $_kernel"
-		break
-	fi
-
-	# Change +/- into add/remove
-	_action=add
-	case "$resp" in
-		+*)	resp="${resp#?}"
-			;;
-		-*)	resp="${resp#?}"
-			_action=remove
-			;;
-	esac
-
-	# Major hack to allow the user to select globbing patterns
-	set -o noglob
-	_tfile=/tmp/install_case.$$	# safe in single user mode
-	cat >$_tfile << OOF
-	case \$_f in
-		$resp)	# Add/remove file to extraction list
-			if [ "\$_action" = "add" ]; then
-				_get_files=\`addel \${_f} \${_get_files}\`
-				_setsdone=\`addel \${_f} \${_setsdone}\`
-			elif [ "\$_action" = "remove" ]; then
-				_get_files=\`rmel \${_f} \${_get_files}\`
-				_setsdone=\`rmel \${_f} \${_setsdone}\`
-			else
-				echo "Unknown action: \$_action"
-			fi
-			_matched=\$(( \$_matched + 1 ))
-			;;
-	esac
-OOF
-	set +o noglob
-
-	# Eww.
-	_matched=0
-	for _f in $_sets $_kernel; do
-		. $_tfile
-	done
-	rm -f $_tfile
-
-	if [ $_matched -eq 0 ]; then
-		eval echo "File \$_${_url_type}_server_dir/$resp does not exist.  Check to make"
-		echo "sure you entered the information properly or enter 'list' for a file list."
-	fi
-done
-
-# User may have said "done" without selecting any files
-if [ "X${_get_files}" = X"" ]; then
-	return
-fi
-
-echo
-echo "Fetching files via ${_url_type} may take a long time, especially over a slow network"
-echo -n "connection.  Ready to download files? [y] "
-getresp "y"
-case "$resp" in
-	y*|Y*)
-		;;
-	*)
-		_setsdone="$_osetsdone"
-		return
-		;;
-esac
-
-# Download the files one at a time and keep track of which ones failed
-while test -n "${_get_files}" ; do
-	_failed_files=""
-	for _f in $_get_files ; do
-		echo ""
-		if [ "X${_f}" = "X${_kernel}" ]; then
-			( cd /mnt ; ftp ${_ftp_active} -V ${_url_base}/${_f} )
-		else
-			( cd /mnt ; ftp ${_ftp_active} -o - -V ${_url_base}/${_f} | tar zxvpf - )
-		fi
-		if [ $? -ne 0 ]; then
-			# Mark xfer as having failed,.
-			_setsdone=`rmel $_f $_setsdone`
-			_failed_files="${_failed_files} ${_f}"
-		fi
-	done
-
-	# Give them the option of refetching failed files.
-	_get_files=""
-	while test -n "${_failed_files}" ; do
-		echo ""
-		echo "The following files failed to transfer and extract correctly:"
-		echo "Choose which one(s) to refetch or 'done' to exit selector."
-		echo "You may de-select a file by prepending a '-' to its name."
-		echo ""
-		get_selection "$_failed_files"
-
-		if [ "X${resp}" = X"done" ]; then
-			break
-		elif [ "X${resp}" = X"list" ]; then
-			echo ""
-			eval echo "\$_${_url_type}_server_dir:"
-			echo "${_file_list}"
-			echo ""
-			continue
-		fi
-
-		# Change +/- into add/remove
-		_action=add
-		case "$resp" in
-			+*)	resp="${resp#?}"
-				;;
-			-*)	resp="${resp#?}"
-				_action=remove
-				;;
-		esac
-
-		# Major hack to allow the user to select globbing patterns
-		set -o noglob
-		_tfile=/tmp/install_case.$$	# safe in single user mode
-		cat >$_tfile << OOF
-		case \$_f in
-			$resp)	# Add/remove file to extraction list
-				if [ "\$_action" = "add" ]; then
-					_get_files=\`addel \${_f} \${_get_files}\`
-					_setsdone=\`addel \${_f} \${_setsdone}\`
-				elif [ "\$_action" = "remove" ]; then
-					_get_files=\`rmel \${_f} \${_get_files}\`
-					_setsdone=\`rmel \${_f} \${_setsdone}\`
-				else
-					echo "Unknown action: \$_action"
-				fi
-				_matched=\$(( \$_matched + 1 ))
-				;;
-		esac
-OOF
-		set +o noglob
-
-		# Eww.
-		_matched=0
-		for _f in $_failed_files; do
-			. $_tfile
-		done
-		rm -f $_tfile
-
-		if [ $_matched -eq 0 ]; then
-			eval echo "File \$_${_url_type}_server_dir/$resp does not exist.  Check to make"
-			echo "sure you entered the information properly or enter 'list' for a file list."
-		fi
-	done
-done
-}
-
-install_from_mounted_fs() {
-# $1 - directory containing installation sets
-local _sets
-local _kernel
-local _f
-local _get_files
-local _failed_files
-local _osetsdone
-local _tfile
-local _matched
-local _action
-
-if [ ! -d $1 ]; then
-	echo "No such directory: $1"
-	return
-fi
-
-_sets=""
-if dir_has_sets $1 $THESETS; then
-	for _f in $THESETS ; do
-		if [ "X${_f}" = "Xkernel" ]; then
-			if [ -f $1/bsd ]; then
-				_kernel=bsd
-			fi
-		elif [ -f $1/${_f}${VERSION}.tar.gz ]; then
-			_sets="$_sets ${_f}${VERSION}.tar.gz"
-		elif [ -f $1/${_f}${VERSION}.tgz ]; then
-			_sets="$_sets ${_f}${VERSION}.tgz"
-		fi
-	done
-else
-	echo "There are no OpenBSD install sets available in \"$1\"."
-	echo -n "Search for *.tar.gz and *.tgz files? [y] "
-	getresp "y"
-	case "$resp" in
-		n*|N*)	return ;;
-		*)	;;
-	esac
-	# *.tar.gz and *.tgz are possible sets
-	_sets=""
-	_kernel=""
-	_sets=`cd $1 ; echo *.tar.gz *.tgz`
-	if [ "X${_sets}" = X'*.tar.gz *.tgz' ]; then
-		echo "There are no *.tar.gz or *.tgz files in that dir."
-		echo -n "See a directory listing? [y] "
-		getresp "y"
-		case "$resp" in
-			n*|N*)	return ;;
-			*)	;;
-		esac
-		echo ""
-		( cd $1 && ls )
-		echo ""
-		return
-	else
-		echo "Adding *.tar.gz and *.tgz files to selector."
-	fi
-fi
-
-echo "\n"\
-"You will now be asked for files to extract.  In addition to the\n"\
-"files listed in the selector you may enter any file located in\n"\
-"$1.  You can also enter 'all' to install all the standard\n"\
-"sets, or 'list' to list the files avilable in $1.\n"\
-"When you are done selecting files, enter 'done'.\n"\
-"Some of these sets are required for your ${MODE} and some are optional --\n"\
-"You will want at least the base and bsd sets.\n"\
-"Consult the intallation notes if you are not sure which sets are required!"
-_osetsdone="$_setsdone"
-# Set a minimal default
-for _f in $_sets $_kernel; do
-	case "$_f" in
-		base*.tar.gz|base*.tgz|etc*.tar.gz|etc*.tgz|bsd|bsdofw)
-			if ! isin ${_f} ${_setsdone}; then
-				_get_files=`addel ${_f} ${_get_files}`
-				_setsdone=`addel ${_f} ${_setsdone}`
-			fi
-			;;
-	esac
-done
-
-# Allow the user to select/de-select additional sets
-while : ; do
-	echo ""
-	echo "The following sets are available for extraction."
-	echo "Enter filename, \`list', \`all', or \`done'."
-	echo "You may de-select a set by prepending a '-' to its name."
-	echo ""
-	get_selection "$_sets $_kernel"
-
-	if [ "X${resp}" = X"done" ]; then
-		break
-	elif [ "X${resp}" = X"list" ]; then
-		echo ""
-		echo "${1}:"
-		( cd $1 && ls )
-		continue
-	elif [ "X${resp}" = X"all" ]; then
-		_get_files="$_sets $_kernel"
-		_setsdone="$_sets $_kernel"
-		break
-	fi
-
-	# Change +/- into add/remove
-	_action=add
-	case "$resp" in
-		+*)	resp="${resp#?}"
-			;;
-		-*)	resp="${resp#?}"
-			_action=remove
-			;;
-	esac
-
-	# Major hack to allow the user to select globbing patterns
-	set -o noglob
-	_tfile=/tmp/install_case.$$	# safe in single user mode
-	cat >$_tfile << OOF
-	case \$_f in
-		$resp)	# Add/remove file to extraction list
-			if [ "\$_action" = "add" ]; then
-				_get_files=\`addel \${_f} \${_get_files}\`
-				_setsdone=\`addel \${_f} \${_setsdone}\`
-			elif [ "\$_action" = "remove" ]; then
-				_get_files=\`rmel \${_f} \${_get_files}\`
-				_setsdone=\`rmel \${_f} \${_setsdone}\`
-			else
-				echo "Unknown action: \$_action"
-			fi
-			_matched=\$(( \$_matched + 1 ))
-			;;
-	esac
-OOF
-	set +o noglob
-
-	# Eww.
-	_matched=0
-	for _f in $_sets $_kernel; do
-		. $_tfile
-	done
-	rm -f $_tfile
-
-	if [ $_matched = 0 ]; then
-	    echo "File $1/$resp does not exist.  Check to make"
-	    echo "sure you entered the information properly or enter 'list' for a file list."
-	fi
-done
-
-# User may have said "done" without selecting any files
-if [ "X${_get_files}" = X"" ]; then
-	return
-fi
-
-echo
-echo -n "Ready to extract selected file sets? [y] "
-getresp "y"
-case "$resp" in
-	y*|Y*)
-		;;
-	*)
-		_setsdone="$_osetsdone"
-		return
-		;;
-esac
-
-# Extract the files one at a time and keep track of which ones failed
-while test -n "${_get_files}" ; do
-	_failed_files=""
-	for _f in $_get_files ; do
-		echo ""
-		echo "$1/${_f}:"
-		if [ "X${_f}" = "X${_kernel}" ]; then
-			cp $1/$_f /mnt/$_f
-		else
-			cat $1/$_f | (cd /mnt; tar -zxvpf -)
-		fi
-		if [ $? -ne 0 ]; then
-			# Mark xfer as having failed,.
-			_setsdone=`rmel $_f $_setsdone`
-			_failed_files="${_failed_files} ${_f}"
-		fi
-	done
-
-	# Give them the option of retrying failed files.
-	_get_files=""
-	while test -n "${_failed_files}" ; do
-		echo ""
-		echo "The following files failed to extract correctly:"
-		echo "Choose which one(s) to retry or 'done' to exit selector."
-		echo "You may de-select a file by prepending a '-' to its name."
-		echo ""
-		get_selection "$_failed_files"
-
-		if [ "X${resp}" = X"done" ]; then
-			break
-		elif [ "X${resp}" = X"list" ]; then
-			echo ""
-			echo "${1}:"
-			( cd $1 && ls )
-			echo ""
-			continue
-		fi
-
-		# Change +/- into add/remove
-		_action=add
-		case "$resp" in
-			+*)	resp="${resp#?}"
-				;;
-			-*)	resp="${resp#?}"
-				_action=remove
-				;;
-		esac
-
-		# Major hack to allow the user to select globbing patterns
-		set -o noglob
-		_tfile=/tmp/install_case.$$	# safe in single user mode
-		cat >$_tfile << OOF
-		case \$_f in
-			$resp)	# Add/remove file to extraction list
-				if [ "\$_action" = "add" ]; then
-					_get_files=\`addel \${_f} \${_get_files}\`
-					_setsdone=\`addel \${_f} \${_setsdone}\`
-				elif [ "\$_action" = "remove" ]; then
-					_get_files=\`rmel \${_f} \${_get_files}\`
-					_setsdone=\`rmel \${_f} \${_setsdone}\`
-				else
-					echo "Unknown action: \$_action"
-				fi
-				_matched=\$(( \$_matched + 1 ))
-				;;
-		esac
-OOF
-		set +o noglob
-
-		# Eww.
-		_matched=0
-		for _f in $_failed_files; do
-			. $_tfile
-		done
-		rm -f $_tfile
-
-		if [ $_matched = 0 ]; then
-		    echo "File $1/$resp does not exist.  Check to make"
-		    echo "sure you entered the information properly or enter 'list' for a file list."
-		fi
-	done
-done
-}
-
-install_cdrom() {
-local _drive
-local _partition_range
-local _partition
-local _fstype
-local _directory
-
-# Get the cdrom device info
-cat << \__install_cdrom_1
-
-The following CD-ROM devices are installed on your system; please select
-the CD-ROM device containing the partition with the installation sets:
-
-__install_cdrom_1
-_CDDEVS=`md_get_cddevs`
-echo    "$_CDDEVS"
-echo	""
-echo -n	"Which is the CD-ROM with the installation media? [abort] "
-getresp "abort"
-case "$resp" in
-	abort)
-		echo "Aborting."
-		return
-		;;
-
-	*)
-		if isin $resp $_CDDEVS ; then
-			_drive=$resp
-		else
-			echo ""
-			echo "The CD-ROM $resp does not exist."
-			echo "Aborting."
-			return
-		fi
-		;;
-esac
-
-# Get partition
-_partition_range=`md_get_partition_range`
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	echo -n "Partition? [c] "
-	getresp "c"
-	case "$resp" in
-		$_partition_range)
-			_partition=$resp
-			;;
-
-		*)
-			echo "Invalid response: $resp"
-			resp=""		# force loop to repeat
-			;;
-	esac
-done
-
-# Ask for filesystem type
-cat << \__install_cdrom_2
-
-There are two CD-ROM filesystem types currently supported by this program:
-cd9660		ISO-9660
-ffs		Berkeley Fast Filesystem
-
-__install_cdrom_2
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	echo -n "Which filesystem type? [cd9660] "
-	getresp "cd9660"
-	case "$resp" in
-		cd9660|ffs)
-			_fstype=$resp
-			;;
-
-		*)
-			echo "Invalid response: $resp"
-			resp=""		# force loop to repeat
-			;;
-	esac
-done
-
-# Mount the CD-ROM
-if ! mount -t ${_fstype} -o ro \
-    /dev/${_drive}${_partition} /mnt2 ; then
-	echo "Cannot mount CD-ROM drive.  Aborting."
-	return
-fi
-
-# Get the directory where the file lives
-if [ "X${_directory}" = X"" ]; then
-	_directory="/${VERSION_MAJOR}.${VERSION_MINOR}/${ARCH}"
-fi
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	echo "Enter the directory relative to the mount point that"
-	echo -n "contains the file. [${_directory}] "
-	getresp "${_directory}"
-done
-_directory=$resp
-
-install_from_mounted_fs /mnt2/${_directory}
-umount -f /mnt2 > /dev/null 2>&1
-}
-
-mount_a_disk() {
-# Mount a disk on /mnt2. The set of disk devices to choose from
-# is $_DKDEVS.
-# returns 0 on failure.
-
-local _drive
-local _def_partition
-local _partition_range
-local _partition
-local _fstype
-local _fsopts
-local _directory
-local _md_fstype
-local _md_fsopts
-
-getresp "abort"
-case "$resp" in
-	abort)
-		echo "Aborting."
-		return 0
-		;;
-
-	*)
-		if isin $resp $_DKDEVS ; then
-			_drive=$resp
-		else
-			echo ""
-			echo "The disk $resp does not exist."
-			echo "Aborting."
-			return 0
-		fi
-		;;
-esac
-
-# Get partition
-cat <<__mount_a_disk_1
-
-The following partitions have been found on $_drive:
-
-__mount_a_disk_1
-disklabel $_drive 2>/dev/null | grep '^  .:'
-echo
-_likely_partition_range=`disklabel $_drive 2>/dev/null | \
-    sed -n -e '/swap/s/.*//' -e '/unused/s/.*//' \
-	-e '/^  .:/{s/^  \(.\).*/\1/;H;}' \
-	-e '${g;s/\n//g;s/^/[/;s/$/]/p;}'`
-_partition_range=`disklabel $_drive 2>/dev/null | \
-    sed -n -e '/^  .:/{s/^  \(.\).*/\1/;H;}' \
-	-e '${g;s/\n//g;s/^/[/;s/$/]/p;}'`
-_def_partition=`echo $_likely_partition_range | \
-    sed -n 's/^\[\(.\).*\]/\1/p'`
-if [ -z "$_def_partition" ]; then
-	_def_partition=`echo $_partition_range | \
-	    sed -n 's/^\[\(.\).*\]/\1/p'`
-	if [ -z "$_def_partition" ]; then
-		echo "There are no usable partitions on that disk"
-		return 0
-	fi
-fi 
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	echo -n "Partition? [$_def_partition] "
-	getresp "$_def_partition"
-	case "$resp" in
-		$_partition_range)
-			_partition=$resp
-			;;
-
-		*)
-			echo "Invalid response: $resp"
-			resp=""		# force loop to repeat
-			;;
-	esac
-done
-
-# Ask for filesystem type
-cat << \__mount_a_disk_2
-
-The following filesystem types are supported:
-default		(deduced from the disklabel)
-ffs
-__mount_a_disk_2
-_md_fstype=`md_native_fstype`
-_md_fsopts=`md_native_fsopts`
-if [ ! -z "$_md_fstype" ]; then
-	echo "	$_md_fstype"
-else
-	_md_fstype="_undefined_"
-fi
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	echo -n "Which filesystem type? [default] "
-	getresp "default"
-	case "$resp" in
-		default)
-			_fstype=""
-			_fsopts="ro"
-			;;
-		ffs)
-			_fstype="-t $resp"
-			_fsopts="ro"
-			;;
-		$_md_fstype)
-			_fstype="-t $resp"
-			_fsopts=$_md_fsopts
-			;;
-		*)
-			echo "Invalid response: $resp"
-			resp=""		# force loop to repeat
-			;;
-	esac
-done
-
-# Mount the disk
-if ! mount $_fstype -o $_fsopts /dev/${_drive}${_partition} /mnt2; then
-	echo "Cannot mount disk.  Aborting."
-	return 0
-fi
-return 1
-}
-
-install_disk() {
-local _directory
-
-cat << \__install_disk_1
-
-The following disk devices are installed on your system; please select
-the disk device containing the partition with the installation sets:
-
-__install_disk_1
-_DKDEVS=`md_get_diskdevs`
-echo    "$_DKDEVS"
-echo	""
-echo -n	"Which is the disk with the installation sets? [abort] "
-
-if mount_a_disk ; then
-	return
-fi
-
-# Get the directory where the file lives
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	echo "Enter the directory relative to the mount point that"
-	echo -n "contains the file. [${_directory}] "
-	getresp "${_directory}"
-done
-_directory=$resp
-
-install_from_mounted_fs /mnt2/${_directory}
-umount -f /mnt2 > /dev/null 2>&1
-}
-
-install_nfs() {
-# Get the IP address of the server
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	echo -n "Server IP address or hostname? [${_nfs_server_ip}] "
-	getresp "${_nfs_server_ip}"
-done
-_nfs_server_ip=$resp
-
-# Get server path to mount
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	echo -n "Filesystem on server to mount? [${_nfs_server_path}] "
-	getresp "${_nfs_server_path}"
-done
-_nfs_server_path=$resp
-
-# Determine use of TCP
-echo -n "Use TCP transport (only works with capable NFS server)? [n] "
-getresp "n"
-case "$resp" in
-	y*|Y*)
-		_nfs_tcp="-T"
-		;;
-
-	*)
-		_nfs_tcp=""
-		;;
-esac
-
-# Mount the server
-mkdir /mnt2 > /dev/null 2>&1
-if ! mount_nfs $_nfs_tcp ${_nfs_server_ip}:${_nfs_server_path} \
-    /mnt2 ; then
-	echo "Cannot mount NFS server.  Aborting."
-	return
-fi
-
-# Get the directory where the file lives
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	echo "Enter the directory relative to the mount point that"
-	echo -n "contains the file. [${_nfs_directory}] "
-	getresp "${_nfs_directory}"
-done
-_nfs_directory=$resp
-
-install_from_mounted_fs /mnt2/${_nfs_directory}
-umount -f /mnt2 > /dev/null 2>&1
-}
-
-install_tape() {
-local _xcmd
-
-# Get the name of the tape from the user.
-cat << \__install_tape_1
-
-The installation program needs to know which tape device to use.  Make
-sure you use a "no rewind on close" device.
-
-__install_tape_1
-_tape=`basename $TAPE`
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	echo -n "Name of tape device? [${_tape}] "
-	getresp "${_tape}"
-done
-_tape=`basename $resp`
-TAPE="/dev/${_tape}"
-if [ ! -c $TAPE ]; then
-	echo "$TAPE does not exist or is not a character special file."
-	echo "Aborting."
-	return
-fi
-export TAPE
-
-# Rewind the tape device
-echo -n "Rewinding tape..."
-if ! mt rewind ; then
-	echo "$TAPE may not be attached to the system or may not be"
-	echo "a tape device.  Aborting."
-	return
-fi
-echo "done."
-
-# Get the file number
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	echo -n "File number? "
-	getresp ""
-	case "$resp" in
-		[1-9]*)
-			_nskip=`expr $resp - 1`
-			;;
-
-		*)
-			echo "Invalid file number ${resp}."
-			resp=""		# fore loop to repeat
-			;;
-	esac
-done
-
-# Skip to correct file.
-echo -n "Skipping to source file..."
-if [ "X${_nskip}" != X"0" ]; then
-	if ! mt fsf $_nskip ; then
-		echo "Could not skip $_nskip files.  Aborting."
-		return
-	fi
-fi
-echo "done."
-
-cat << \__install_tape_2
-
-There are 2 different ways the file can be stored on tape:
-
-1) an image of a gzipped tar file
-2) a standard tar image
-
-__install_tape_2
-resp=""		# force one iteration
-while [ "X${resp}" = X"" ]; do
-	echo -n "Which way is it? [1] "
-	getresp "1"
-	case "$resp" in
-	1)
-		_xcmd="tar -zxvpf -"
-		;;
-
-	2)
-		_xcmd="tar -xvpf -"
-		;;
-
-	*)
-		echo "Invalid response: $resp."
-		resp=""		# force loop to repeat
-		;;
-	esac
-	( cd /mnt; dd if=$TAPE | $_xcmd )
-done
-echo "Extraction complete."
-}
-
-get_timezone() {
-local _a
-local _zonepath
-
-#
-# If the zoneinfo is not on the installation medium or on the
-# installed filesystem, set TZ to GMT and return immediatly.
-#
-if [ ! -e /usr/share/zoneinfo -a ! -e /mnt/usr/share/zoneinfo ]; then
-	TZ=GMT
-	return
-fi
-if [ ! -d /usr/share/zoneinfo ]; then
-	_zonepath=/mnt
-else
-	_zonepath=""
-fi
-	
-cat << \__get_timezone_1
-
-Select a time zone for your location. Timezones are represented on the
-system by a directory structure rooted in "/usr/share/timezone". Most
-timezones can be selected by entering a token like "CET" or "GMT-6".
-Other zones are grouped by continent, with detailed zone information
-separated by a slash ("/"), e.g. "US/Pacific" or "Canada/Mountain".
-
-To get a listing of what's available in /usr/share/zoneinfo, enter "?"
-at the prompts below.
-
-__get_timezone_1
-if [ X$TZ = X ]; then
-	TZ=`ls -l /mnt/etc/localtime 2>/dev/null | cutlast`
-	TZ=${TZ#/usr/share/zoneinfo/}
-fi
-while : ; do
-	echo -n	"What timezone are you in [\`?' for list] [$TZ]? "
-	getresp "$TZ"
-	case "$resp" in
-	"")
-		echo "Timezone defaults to GMT"
-		TZ="GMT"
-		break;
-		;;
-	"?")
-		ls -F ${_zonepath}/usr/share/zoneinfo
-		;;
-	*)
-		_a=$resp
-		while [ -d ${_zonepath}/usr/share/zoneinfo/$_a ]; do
-			echo -n "There are several timezones available"
-			echo " within zone '$_a'"
-			echo -n "Select a sub-timezone [\`?' for list]: "
-			getresp ""
-			case "$resp" in
-			"?") ls -F ${_zonepath}/usr/share/zoneinfo/$_a ;;
-			*)	_a=${_a}/${resp}
-				if [ -f ${_zonepath}/usr/share/zoneinfo/$_a ]; then
-					break;
-				fi
-				;;
-			esac
-		done
-		if [ -f ${_zonepath}/usr/share/zoneinfo/$_a ]; then
-			TZ="$_a"
-			echo "You have selected timezone \"$_a\"".
-			return
-		fi
-		echo "'/usr/share/zoneinfo/$_a' is not a valid timezone on this system."
-		;;
-	esac
-done
-}
-
-install_sets()
-{
-local _yup
-_yup="FALSE"
-
-# Ask the user which media to load the distribution from.
-cat << \__install_sets_1
-
-It is now time to extract the installation sets onto the hard disk.  Make sure
-the sets are either on a local device (i.e. tape, CD-ROM) or on a network
-server.  You will have the chance to repeat this step or to extract sets from
-several places, so you don't have to try to load all the sets in one try and
-can recover from some errors.
-
-__install_sets_1
-
-if [ "X$local_sets_dir" != "X" ]; then
-	install_from_mounted_fs ${local_sets_dir}
-	if [ X"$_setsdone" != X ]; then
-		_yup="TRUE"
-	fi
-fi
-
-# Go on prodding for alternate locations
-resp=""		# force at least one iteration
-while [ X"${resp}" = X ]; do
-	# If _yup is not FALSE, it means that we extracted sets above.
-	# If that's the case, bypass the menu the first time.
-	if [ X"$_yup" = X"FALSE" ]; then
-		echo -n	"Install from (f)tp, h(ttp), (t)ape, (C)D-ROM,"
-		echo -n " (N)FS or local (d)isk? "
-		getresp ""
-		case "$resp" in
-		d*|D*)
-			install_disk
-			resp=d
-			;;
-		f*|F*)
-			install_url ftp
-			resp=f
-			;;
-		h*|H*)
-			install_url http
-			resp=h
-			;;
-		t*|T*)
-			install_tape
-			resp=t
-			;;
-		c*|C*)
-			install_cdrom
-			resp=c
-			;;
-		n*|N*)
-			install_nfs
-			resp=n
-			;;
-		*)
-			echo "Invalid response: $resp"
-			resp=""
-			;;
-		esac
-	else
-		_yup="FALSE"	# So we'll ask next time
-	fi
-
-	if [ ! -f /mnt/bsd ]; then
-		cat << \__install_sets_2
-
-You still do not have a /bsd in your filesystem (ie. the kernel), which
-seems to indicate that you are still missing important distribution files.
-So please continue installing...
-__install_sets_2
-		resp=""
-	fi
-	if [ ! -f /mnt/bin/cat ]; then
-		cat << \__install_sets_3
-
-You still do not have a /bin/cat in your filesystem (ie. a sample random file
-which you probably want). This seems to indicate that you are still missing
-important distribution files. So please continue installing...
-__install_sets_3
-		resp=""
-	fi
-
-	# Give the user the opportunity to extract more sets. They
-	# don't necessarily have to come from the same media.
-	echo	""
-	echo -n	"Extract more sets? [n] "
-	getresp "n"
-	case "$resp" in
-	y*|Y*)
-		# Force loop to repeat
-		resp=""
-		;;
-
-	*)
-		;;
-	esac
-done
-}
-
-munge_fstab()
-{
-local _fstab
-local _fstab_shadow
-local _dev
-local _mp
-local _fstype
-local _rest
-
-# Now that the 'real' fstab is configured, we munge it into a 'shadow'
-# fstab which we'll use for mounting and unmounting all of the target
-# filesystems relative to /mnt.  Mount all filesystems.
-_fstab=$1
-_fstab_shadow=$2
-( while read _dev _mp _fstype _rest; do
-	# Skip comment lines
-	case "$_dev" in
-		\#*)	continue;;
-		*)	;;
-	esac
-	# and some filesystem types (like there are swap,kernfs,...)
-	case "$_fstype" in
-		ffs|ufs|nfs)	;;
-		*)	continue;;
-	esac
-	if [ "$_mp" = "/" ]; then
-		echo $_dev /mnt $_fstype $_rest
-	else
-		echo $_dev /mnt$_mp $_fstype $_rest
-	fi
-    done ) < $_fstab > $_fstab_shadow
-}
-
-mount_fs()
-{
-# Must mount filesystems manually, one at a time, so we can make
-# sure the mount points exist.
-# $1 is a file in fstab format
-local _fstab
-
-_fstab=$1
-
-( while read line; do
-	set -- $line
-	_dev=$1
-	_mp=$2
-	_fstype=$3
-	_opt=$4
-
-	# If not the root filesystem, make sure the mount
-	# point is present.
-	if [ "X{$_mp}" != X"/mnt" ]; then
-		mkdir -p $_mp
-	fi
-
-	# Mount the filesystem.  If the mount fails, exit
-	# with an error condition to tell the outer
-	# later to bail.
-	if ! mount -v -t $_fstype -o $_opt $_dev $_mp ; then
-		# error message displated by mount
-		exit 1
-	fi
-done ) < $_fstab
-
-if [ "X${?}" != X"0" ]; then
-	cat << \__mount_filesystems_1
-
-FATAL ERROR:  Cannot mount filesystems.  Double-check your configuration
-and restart the installation process.
-__mount_filesystems_1
-	exit
-fi
-}
-
-unmount_fs()
-{
-# Unmount all filesystems and check their integrity.
-# Usage: [-check] <fstab file>
-local _check
-local _fstab
-local _pid
-
-if [ "$1" = "-check" ]; then
-	_check=1
-	_fstab=$2
-else
-	_check=0
-	_fstab=$1
-fi
-
-if [ ! \( -f $_fstab -a -s $_fstab \) ]; then
-	echo "fstab empty" > /dev/tty
-	return
-fi
-
-(
-	_devs=""
-	_mps=""
-	# maintain reverse order
-	while read line; do
-		set -- $line
-		_devs="$1 ${_devs}"
-		_mps="$2 ${_mps}"
-	done
-	echo -n "Umounting filesystems... "
-	for _mp in ${_mps}; do
-		echo -n "${_mp} "
-		umount ${_mp}
-	done
-	echo "Done."
-
-	if [ $_check = 1 ]; then
-		echo "Checking filesystem integrity..."
-		for _dev in ${_devs}; do
-			echo  "${_dev}"
-			fsck -f ${_dev}
-		done
-	fi
-	echo "Done."
-) < $_fstab
-}
-
-check_fs()
-{
-# Check filesystem integrity.
-# $1 is a file in fstab format
-local _fstab
-
-_fstab=$1
-
-(
-	_devs=""
-	_mps=""
-	while read line; do
-		set -- $line
-		_devs="$1 ${_devs}"
-		_mps="$2 ${_mps}"
-	done
-
-	echo "Checking filesystem integrity..."
-	for _dev in ${_devs}; do
-		echo  "${_dev}"
-		fsck -f ${_dev}
-	done
-	echo "Done."
-) < $_fstab
-}
diff --git a/distrib/macppc/ramdisk/list b/distrib/macppc/ramdisk/list
index d607be22dc3..786dd1c66a6 100644
--- a/distrib/macppc/ramdisk/list
+++ b/distrib/macppc/ramdisk/list
@@ -1,4 +1,4 @@
-#	$OpenBSD: list,v 1.4 2001/10/08 17:40:40 drahn Exp $
+#	$OpenBSD: list,v 1.5 2001/11/19 01:23:26 drahn Exp $
 
 SRCDIRS distrib/special
 SRCDIRS gnu/usr.bin usr.bin bin sbin usr.sbin
@@ -98,6 +98,5 @@ COPY	dot.profile			.profile
 SPECIAL sed -e '/^[ 	]*#[ 	].*$/d' -e '/^[ 	]*#$/d' -e "s/^ARCH=ARCH$/ARCH=`arch -ks`/" < ${CURDIR}/install.md > install.md
 COPY	${CURDIR}/../../miniroot/install.sh		install
 COPY	${CURDIR}/../../miniroot/upgrade.sh		upgrade
-#SPECIAL sed "/^VERSION=/s/=.*/=${REV}/" < ${CURDIR}/install.sub > install.sub
 SPECIAL sed "/^VERSION=/s/=.*/=${REV}/" < ${CURDIR}/../../miniroot/install.sub > install.sub
 SPECIAL	chmod 755 install upgrade