diff options
| author | Alexander Bluhm <bluhm@cvs.openbsd.org> | 2008-07-01 15:00:55 +0000 |
|---|---|---|
| committer | Alexander Bluhm <bluhm@cvs.openbsd.org> | 2008-07-01 15:00:55 +0000 |
| commit | ec17add7bc79551b55da5b3f390fa5e620127244 (patch) | |
| tree | d6dd3dac752697b62aeac06e0d235f2631a6fcfd /regress/sbin/ipsecctl/ikefail6.ok | |
| parent | 9c78cb2146f35e6ffd5b0e0a09831b3f586c8f15 (diff) | |
Isakmpd acquire mode did not work with a config generated from
ipsec.conf. The config created by isakmpd dynamically was different
from the config that ipsecctl generated out of ipsec.conf.
Both config formats are changed so that they match. One needs a
passive ike line and a require flow line with the same parameters
in the ipsec.conf. Then the acquire message generated by the kernel
will trigger isakmpd to generate a config that matches the one that
ipsecctl generated from the ike line.
ok hshoexer, 'sounds good' todd
Diffstat (limited to 'regress/sbin/ipsecctl/ikefail6.ok')
| -rw-r--r-- | regress/sbin/ipsecctl/ikefail6.ok | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/regress/sbin/ipsecctl/ikefail6.ok b/regress/sbin/ipsecctl/ikefail6.ok index 373f800c289..d71e7b12eea 100644 --- a/regress/sbin/ipsecctl/ikefail6.ok +++ b/regress/sbin/ipsecctl/ikefail6.ok @@ -2,13 +2,13 @@ ipsecctl: illegal transform aes C set [Phase 1]:2.2.2.2=peer-2.2.2.2 force C set [peer-2.2.2.2]:Phase=1 force C set [peer-2.2.2.2]:Address=2.2.2.2 force -C set [peer-2.2.2.2]:Configuration=mm-2.2.2.2 force -C set [mm-2.2.2.2]:EXCHANGE_TYPE=ID_PROT force -C add [mm-2.2.2.2]:Transforms=AES-SHA-RSA_SIG force -C set [IPsec-1.1.1.1-2.2.2.2]:Phase=2 force -C set [IPsec-1.1.1.1-2.2.2.2]:ISAKMP-peer=peer-2.2.2.2 force -C set [IPsec-1.1.1.1-2.2.2.2]:Configuration=qm-1.1.1.1-2.2.2.2 force -C set [IPsec-1.1.1.1-2.2.2.2]:Local-ID=lid-1.1.1.1 force -C set [IPsec-1.1.1.1-2.2.2.2]:Remote-ID=rid-2.2.2.2 force -C set [qm-1.1.1.1-2.2.2.2]:EXCHANGE_TYPE=QUICK_MODE force -C set [qm-1.1.1.1-2.2.2.2]:Suites=QM-AH-
\ No newline at end of file +C set [peer-2.2.2.2]:Configuration=phase1-peer-2.2.2.2 force +C set [phase1-peer-2.2.2.2]:EXCHANGE_TYPE=ID_PROT force +C add [phase1-peer-2.2.2.2]:Transforms=AES-SHA-RSA_SIG force +C set [from-1.1.1.1-to-2.2.2.2]:Phase=2 force +C set [from-1.1.1.1-to-2.2.2.2]:ISAKMP-peer=peer-2.2.2.2 force +C set [from-1.1.1.1-to-2.2.2.2]:Configuration=phase2-from-1.1.1.1-to-2.2.2.2 force +C set [from-1.1.1.1-to-2.2.2.2]:Local-ID=from-1.1.1.1 force +C set [from-1.1.1.1-to-2.2.2.2]:Remote-ID=to-2.2.2.2 force +C set [phase2-from-1.1.1.1-to-2.2.2.2]:EXCHANGE_TYPE=QUICK_MODE force +C set [phase2-from-1.1.1.1-to-2.2.2.2]:Suites=QM-AH-
\ No newline at end of file |