`tunnel' before `txpower' in the command list;

1 files changed, 8 insertions, 8 deletions

diff --git a/sbin/ifconfig/ifconfig.8 b/sbin/ifconfig/ifconfig.8
index 966cc4d5253..078aea062c2 100644
--- a/sbin/ifconfig/ifconfig.8
+++ b/sbin/ifconfig/ifconfig.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: ifconfig.8,v 1.99 2005/02/15 19:45:22 reyk Exp $
+.\"	$OpenBSD: ifconfig.8,v 1.100 2005/02/15 20:57:21 jmc Exp $
 .\"	$NetBSD: ifconfig.8,v 1.11 1996/01/04 21:27:29 pk Exp $
 .\"     $FreeBSD: ifconfig.8,v 1.16 1998/02/01 07:03:29 steve Exp $
 .\"
@@ -656,6 +656,13 @@ Clear the IPv6 tentative address bit.
 .It Cm timeslot Ar timeslot_range
 Set the timeslot range map, which is used to control which channels
 an interface device uses.
+.It Cm tunnel Ar src_address dest_address
+Set the source and destination tunnel addresses on a tunnel interface,
+including
+.Xr gif 4 .
+Packets routed to this interface will be encapsulated in
+IPv4 or IPv6, depending on the source and destination address families.
+Both addresses must be of the same family.
 .It Cm txpower Ar dBm
 (IEEE 802.11 devices only)
 Set the transmit power for IEEE 802.11-based wireless network interfaces.
@@ -665,13 +672,6 @@ mode.
 (IEEE 802.11 devices only)
 Disable manual transmit power mode and enable any auto level and transmit
 power controls.
-.It Cm tunnel Ar src_address dest_address
-Set the source and destination tunnel addresses on a tunnel interface,
-including
-.Xr gif 4 .
-Packets routed to this interface will be encapsulated in
-IPv4 or IPv6, depending on the source and destination address families.
-Both addresses must be of the same family.
 .It Cm up
 Mark an interface
 .Dq up .