this will replace share/{termcap,terminfo} soon

5 files changed, 19604 insertions, 0 deletions

diff --git a/share/termtypes/Makefile b/share/termtypes/Makefile
new file mode 100644
index 00000000000..ae529e7a01c
--- /dev/null
+++ b/share/termtypes/Makefile
@@ -0,0 +1,40 @@
+#	$OpenBSD: Makefile,v 1.1 1998/12/07 18:23:36 millert Exp $
+#
+# Take termcap/terminfo master file and generate termcap/terminfo .db files
+# master: http://www.tuxedo.org/~esr/terminfo/termtypes.master.gz
+
+MAN=	termcap.5
+CLEANFILES+= terminfo.src termcap.src terminfo.db termcap.db
+
+all: terminfo.db termcap.db
+
+terminfo.src: termtypes.master
+	tic -I ${.ALLSRC} | sed \
+	    -e 's,/usr/share/lib/tabset,/usr/share/tabset,g' \
+	    -e 's,/usr/lib/tabset,/usr/share/tabset,g' \
+	    > ${.OBJDIR}/terminfo.src
+
+terminfo.db: terminfo.src
+	info_mkdb -f terminfo ${.OBJDIR}/terminfo.src
+
+termcap.src: termtypes.master
+	tic -C ${.ALLSRC} | sed \
+	    -e 's,/usr/share/lib/tabset,/usr/share/tabset,g' \
+	    -e 's,/usr/lib/tabset,/usr/share/tabset,g' \
+	    > ${.OBJDIR}/termcap.src
+
+termcap.db: termcap.src
+	cap_mkdb -f termcap ${.OBJDIR}/termcap.src
+
+realinstall:
+	${INSTALL} ${INSTALL_COPY} -o ${BINOWN} -g ${BINGRP} -m 444 terminfo.db \
+	     ${DESTDIR}${BINDIR}/misc/terminfo.db
+	${INSTALL} ${INSTALL_COPY} -o ${BINOWN} -g ${BINGRP} -m 444 termcap.db \
+	     ${DESTDIR}${BINDIR}/misc/termcap.db
+	${INSTALL} -c -o ${BINOWN} -g ${BINGRP} -m 444 ${.CURDIR}/termcap.src \
+	     ${DESTDIR}${BINDIR}/misc/termcap
+	${INSTALL} -c -o ${BINOWN} -g ${BINGRP} -m 444 ${.CURDIR}/map3270 \
+	     ${DESTDIR}${BINDIR}/misc/map3270
+	ln -fs ${BINDIR}/misc/termcap ${DESTDIR}/etc/termcap
+
+.include <bsd.prog.mk>
diff --git a/share/termtypes/README b/share/termtypes/README
new file mode 100644
index 00000000000..d701bb00b61
--- /dev/null
+++ b/share/termtypes/README
@@ -0,0 +1,51 @@
+<< 14 October 1987 >>
+It is probably easiest to make local termcap changes in separate
+files, eg /usr/local/etc/termcap, and encourage people to put
+
+	setenv TERMPATH ~/.termcap:/usr/local/etc/termcap:/etc/termcap 
+
+in their shell startup files.  This way local system-wide changes can be
+isolated in /usr/local/etc/termcap and user changes in ~/.termcap, all
+without consuming lots of disk or requiring re-integration of local
+changes when system termcap files change.
+
+	John Kunze
+	termcap@berkeley
+
+<< 12 May 1983 >>
+To install this directory on your system:
+
+First determine a list of "common terminals" for your system.
+This list will probably be small, and can be empty if you like,
+but you should probably put your own terminal in it.
+
+Second, edit the editor script "reorder" to use this list instead
+of the list built in to it.  The changes will be evident from looking
+at the script.  Notice that the script contains the terminals in order
+from least common to most common, since the move commands will move them
+to the front in that order, the effect will be to put the most common
+at the front of termcap since that's moved last.  The s.* terminals
+are specials, and although they don't have to go to the front, they are
+probably quite common and really should go near the front.
+
+Third, if you are not a super user and cannot create the directory
+/usr/lib/tabset, make a corresponding directory somewhere you can and
+add a line to reorder to globally change all /usr/lib/tabset's to your
+own path name.  This change is better than just changing the termcap.src
+file because it makes it easier to diff it from newer distributed versions.
+Try to keep the source as is whenever possible, and put mungings into reorder.
+
+Now you can run "make install" which will create an /etc/termcap. Again,
+if you aren't a super user change the cp command to put it where you can.
+In this case you will have to redefine E_TERMCAP in "local/uparm.h", which
+will probably be in subdirectories with the other UCB software.
+
+
+Finally, if you make additions or fixes to termcap, please mail a note
+explaining what you did with the fixed termcap entry (not the whole file,
+please!) to me at one of the addresses below, so it can be incorporated
+back into the original source.  I will normally include anything unless
+there is a good reason not to, but I reserve the right to redo it differently.
+
+	ucbvax!termcap				(uucp)
+	termcap@berkeley			(Arpanet)
diff --git a/share/termtypes/map3270 b/share/termtypes/map3270
new file mode 100644
index 00000000000..8f70a759684
--- /dev/null
+++ b/share/termtypes/map3270
@@ -0,0 +1,1025 @@
+# Copyright (c) 1989 The Regents of the University of California.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed by the University of
+#	California, Berkeley and its contributors.
+# 4. Neither the name of the University nor the names of its contributors
+#    may be used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+#
+#	@(#)map3270	5.4 (Berkeley) 4/17/91
+#
+
+# This file contains mappings between characters entered from the keyboard,
+# and 3270 keys, for use by programs (like tn3270) doing 3270 emulation
+# from unix.
+#
+# Inside the single quotes, a caret ("^") introduces a control character
+# sequence (rub out = ^?, by the way).  Also inside the single quotes,
+# a backslash ('\') introduces an escaped character.  Also, \n, \r, \t,
+# are all as in C, and \E is another way of representing escape.
+#
+#	NOTE that while we are defining lots of function, much of that
+# function (ie: local editing keys) may not yet be available from tn3270.
+#
+# Please e-mail changes to termcap@berkeley.edu or uunet!ucbvax!termcap.
+#
+
+3a | adm3a {
+    enter = '^m';
+    clear = '^z';
+
+    nl = '^n';
+    tab = '^i';
+    btab = '^b' | '\E^i';
+    left = '^h';
+    right = '^l';
+    up = '^k';
+    down = '^j';
+    home = '^@';
+
+    delete = '^d' | '^?';		# rubout
+    eeof = '^e';
+    einp = '^w';
+    insrt = '\E ';
+    dp = '^u';
+    fm = '^y';
+
+    # pf keys
+    pfk1 = '\E1'; pfk2 = '\E2'; pfk3 = '\E3'; pfk4 = '\E4';
+    pfk5 = '\E5'; pfk6 = '\E6'; pfk7 = '\E7'; pfk8 = '\E8';
+    pfk9 = '\E9'; pfk10 = '\E0'; pfk11 = '\E:'; pfk12 = '\E-';
+    pfk13 = '^f13'; pfk14 = '^f14'; pfk15 = '^f15'; pfk16 = '^f16';
+    pfk17 = '^f17'; pfk18 = '^f18'; pfk19 = '^f19'; pfk20 = '^f20';
+    pfk21 = '^f21'; pfk22 = '^f22'; pfk23 = '^f23'; pfk24 = '^f24';
+
+    # program attention keys
+    pa1 = '^p1';
+    pa2 = '^p2';
+    pa3 = '^p3';
+
+    # other keys
+    cursel = '\E.';
+    centsign = '^\';
+
+    # local control keys
+
+    reset = '^t';	# well, there is a little confusion here...
+    master_reset = '^g';
+    flinp = '^x';
+    reshow = '^v';	# redisplay screen
+    escape = '^c';	# escape to telnet command mode
+
+    # local editing keys
+    settab = '\E;';
+    deltab = '\E\'';
+    clrtab = '\E+';
+    setmrg = '\E(';
+    sethom = '\E!';
+    coltab = '\Ei';
+    colbak = '\Eb';
+    indent = '\El';
+    undent = '\Eh';
+
+} # end of adm3a
+
+920c | tvi920c | 920b {	# tvi920c definitions...
+
+    # command keys
+    enter = '^m';
+    clear = '^z';
+
+    # cursor movement keys
+    nl = '^^' | '^n';		# home
+    tab = '^i';
+    btab = '^b' | '\E^i';
+    left = '^h';
+    right = '^l';
+    up = '^k';
+    down = '^j';
+    home = '^@';
+
+    # edit control keys
+    delete = '^?' | '^d';	# delete
+    eeof = '^e';
+    einp = '^w';
+    insrt = '\E ';
+    dp = '^u';
+    fm = '^y';
+
+    # program function keys
+
+    # F1 to F11
+    pfk1 = '^a@^m'; pfk2 = '^aA^m'; pfk3 = '^aB^m'; pfk4 = '^aC^m';
+    pfk5 = '^aD^m'; pfk6 = '^aE^m'; pfk7 = '^aF^m'; pfk8 = '^aG^m';
+    pfk9 = '^aH^m'; pfk10 = '^aI^m'; pfk11 = '^aJ^m';
+
+    # SHIFT-F11
+    pfk12 = '^aj^m';
+
+    # ESC F1 to ESC F11
+    pfk11 = '\E^a@^m'; pfk12 = '\E^aA^m';
+    pfk13 = '\E^aB^m'; pfk14 = '\E^aC^m'; pfk15 = '\E^aD^m'; pfk16 = '\E^aE^m';
+    pfk17 = '\E^aF^m'; pfk18 = '\E^aG^m'; pfk19 = '\E^aH^m'; pfk20 = '\E^aI^m';
+    pfk21 = '\E^a`^m';
+
+    # ESC SHIFT-F1 to ESC SHIFT-F4
+    pfk21 = '\E^a`^m'; pfk22 = '\E^aa^m'; pfk23 = '\E^ab^m'; pfk24 = '\E^ac^m';
+
+    pfk1 = '\E1'; pfk2 = '\E2'; pfk3 = '\E3'; pfk4 = '\E4';
+    pfk5 = '\E5'; pfk6 = '\E6'; pfk7 = '\E7'; pfk8 = '\E8';
+    pfk9 = '\E9'; pfk10 = '\E0'; pfk11 = '\E-'; pfk12 = '\E=';
+    pfk13 = '^f13'; pfk14 = '^f14'; pfk15 = '^f15'; pfk16 = '^f16';
+    pfk17 = '^f17'; pfk18 = '^f18'; pfk19 = '^f19'; pfk20 = '^f20';
+    pfk21 = '^f21'; pfk22 = '^f22'; pfk23 = '^f23'; pfk24 = '^f24';
+
+    # program attention keys
+
+    pa1 = '^a`^m' | '^p1';
+    pa2 = '^aa^m' | '^p2';
+    pa3 = '^ab^m' | '^p3';
+
+    # miscellaneous 3270 keys
+
+    cursel = '\E.';
+    centsign = '^\';
+
+    # local control keys
+
+    reset = '^t';		# there is some confusion here...
+    master_reset = '^g';
+    flinp = '^x';
+    reshow = '^v';
+    escape = '^c';	# escape to telnet command mode
+
+    # local editing keys
+
+    settab = '\E;';
+    deltab = '\E\'';
+    clrtab = '\E:';
+    setmrg = '\E*';
+    sethom = '\E!';
+    coltab = '\Ei' | '\EI';
+    colbak = '\Eb' | '\EB';
+    indent = '\El' | '\EL';
+    undent = '\Eh' | '\EH';
+} # end of tvi920c table...
+
+925 | tvi925 | 925vb | tvi925vb | televideo 925 {
+
+    # command keys
+
+    enter = '^m';
+    clear = '^z';
+
+    # cursor movement keys
+
+    nl = '^j' | '^n';
+    tab = '^i';
+    btab = '\EI';
+    left = '^h';
+    right = '^l';
+    up = '^k';
+    down = '^v';
+    home = '^^';
+
+    # edit control keys
+
+    delete = '^?';	# that's rubout...
+    eeof = '^e';
+    einp = '^w';
+    insrt = '\E ' | '\EW';
+
+    # program function keys
+
+    pfk1 = '^a@^m';
+    pfk2 = '^aA^m';
+    pfk3 = '^aB^m';
+    pfk4 = '^aC^m';
+    pfk5 = '^aD^m';
+    pfk6 = '^aE^m';
+    pfk7 = '^aF^m';
+    pfk8 = '^aG^m';
+    pfk9 = '^aH^m';
+    pfk10 = '^aI^m';
+    pfk11 = '^aJ^m';
+    pfk12 = '\EQ';
+    pfk13 = '\E^a@^m';
+    pfk14 = '\E^aA^m';
+    pfk15 = '\E^aB^m';
+    pfk16 = '\E^aC^m';
+    pfk17 = '\E^aD^m';
+    pfk18 = '\E^aE^m';
+    pfk19 = '\E^aF^m';
+    pfk20 = '\E^aG^m';
+    pfk21 = '\E^aH^m';
+    pfk22 = '\E^aI^m';
+    pfk23 = '\E^aJ^m';
+    pfk24 = '\E\EQ';
+
+    pfk1 = '\E1'; pfk2 = '\E2'; pfk3 = '\E3'; pfk4 = '\E4';
+    pfk5 = '\E5'; pfk6 = '\E6'; pfk7 = '\E7'; pfk8 = '\E8';
+    pfk9 = '\E9'; pfk10 = '\E0'; pfk11 = '\E-'; pfk12 = '\E=';
+    pfk13 = '^f13'; pfk14 = '^f14'; pfk15 = '^f15'; pfk16 = '^f16';
+    pfk17 = '^f17'; pfk18 = '^f18'; pfk19 = '^f19'; pfk20 = '^f20';
+    pfk21 = '^f21'; pfk22 = '^f22'; pfk23 = '^f23'; pfk24 = '^f24';
+
+    # program attention keys
+
+    pa1 = '^a`^m';
+    pa2 = '^aa^m';
+    pa3 = '^ab^m';
+
+    # other keys
+    centsign = '^\';
+
+    # local control keys
+
+    reset = '^t';		# again, there is some confusion here...
+    master_reset = '^g';
+    flinp = '^x';
+    reshow = '^b';
+    escape = '^c';	# escape to telnet command mode
+
+# local editing keys
+
+    settab = '\EY';
+    deltab = '\Ey';
+    clrtab = '\E:';
+    setmrg = '\ET';
+    sethom = '\Et';
+    coltab = '^p';
+    colbak = '^o';
+    indent = '\ER';
+    undent = '\EE';
+}
+
+
+924 | tvi924 {
+
+    # command keys
+
+    enter = '^m';
+    clear = '^z';
+
+    # cursor movement keys
+
+    nl = '^j';
+    tab = '^i';
+    btab = '\EI';
+    left = '^h';
+    right = '^l';
+    up = '^k';
+    down = '^v';
+    home = '^^';
+
+    # edit control keys
+
+    delete = '^?';	# that's rubout...
+    eeof = '^e';
+    einp = '^w';
+    insrt = '\E ' | '\EW';
+    dp = '^u';
+    fm = '^y';
+
+    # program function keys
+
+    pfk1 = '^a@^m';
+    pfk2 = '^aA^m';
+    pfk3 = '^aB^m';
+    pfk4 = '^aC^m';
+    pfk5 = '^aD^m';
+    pfk6 = '^aE^m';
+    pfk7 = '^aF^m';
+    pfk8 = '^aG^m';
+    pfk9 = '^aH^m';
+    pfk10 = '^aI^m';
+    pfk11 = '^aJ^m';
+    pfk12 = '^aK^m';
+    pfk13 = '^aL^m';
+    pfk14 = '^aM^m';
+    pfk15 = '^aN^m';
+    pfk16 = '^aO^m';
+    pfk17 = '^af^m';
+    pfk18 = '^ag^m';
+    pfk19 = '^ah^m';
+    pfk20 = '^ai^m';
+    pfk21 = '^aj^m';
+    pfk22 = '^ak^m';
+    pfk23 = '^al^m';
+    pfk24 = '^am^m';
+
+    pfk1 = '\E1'; pfk2 = '\E2'; pfk3 = '\E3'; pfk4 = '\E4';
+    pfk5 = '\E5'; pfk6 = '\E6'; pfk7 = '\E7'; pfk8 = '\E8';
+    pfk9 = '\E9'; pfk10 = '\E0'; pfk11 = '\E-'; pfk12 = '\E=';
+    pfk13 = '^f13'; pfk14 = '^f14'; pfk15 = '^f15'; pfk16 = '^f16';
+    pfk17 = '^f17'; pfk18 = '^f18'; pfk19 = '^f19'; pfk20 = '^f20';
+    pfk21 = '^f21'; pfk22 = '^f22'; pfk23 = '^f23'; pfk24 = '^f24';
+
+    # program attention keys
+
+    pa1 = '^a`^m';
+    pa2 = '^aa^m';
+    pa3 = '^ab^m';
+
+    # other keys
+    centsign = '^\';
+
+    # local control keys
+
+    reset = '^t';		# again, there is some confusion here...
+    master_reset = '^g';
+    flinp = '^x';
+    reshow = '^b';
+    escape = '^c';	# escape to telnet command mode
+
+    # local editing keys
+
+    settab = '\EY';
+    deltab = '\Ey';
+    clrtab = '\E:';
+    setmrg = '\ET';
+    sethom = '\Et';
+    coltab = '^p';
+    colbak = '^o';
+    indent = '\ER';
+    undent = '\EE';
+}
+
+h19 | heath | h19b | heathkit | heath-19 | z19 | zenith {
+enter = '^m';
+clear = '^z';
+
+nl = '^n' | '^?';
+tab = '^i';
+btab = '^b';
+left = '^h';
+right = '^l';
+up = '^k';
+down = '^j';
+home = '^@';
+
+delete = '^d';
+eeof = '^e';
+einp = '^w';
+insrt = '\E ';
+
+# pf keys
+pfk1 = '\E?p\E?q'; pfk2 = '\E?p\E?r'; pfk3 = '\E?p\E?s'; pfk4 = '\E?p\E?t';
+pfk5 = '\E?p\E?u'; pfk6 = '\E?p\E?v'; pfk7 = '\E?p\E?w'; pfk8 = '\E?p\E?x';
+pfk9 = '\E?p\E?y'; pfk10 = '\E?q\E?p'; pfk11 = '\E?q\E?q'; pfk12 = '\E?q\E?r';
+pfk13 = '\E?q\E?s'; pfk14 = '\E?q\E?t'; pfk15 = '\E?q\E?u'; pfk16 = '\E?q\E?v';
+pfk17 = '\E?q\E?w'; pfk18 = '\E?q\E?x'; pfk19 = '\E?q\E?y'; pfk20 = '\E?r\E?p';
+pfk21 = '\E?r\E?q'; pfk22 = '\E?r\E?r'; pfk23 = '\E?r\E?s'; pfk24 = '\E?r\E?t';
+
+    pfk1 = '\E1'; pfk2 = '\E2'; pfk3 = '\E3'; pfk4 = '\E4';
+    pfk5 = '\E5'; pfk6 = '\E6'; pfk7 = '\E7'; pfk8 = '\E8';
+    pfk9 = '\E9'; pfk10 = '\E0'; pfk11 = '\E-'; pfk12 = '\E=';
+    pfk13 = '^f13'; pfk14 = '^f14'; pfk15 = '^f15'; pfk16 = '^f16';
+    pfk17 = '^f17'; pfk18 = '^f18'; pfk19 = '^f19'; pfk20 = '^f20';
+    pfk21 = '^f21'; pfk22 = '^f22'; pfk23 = '^f23'; pfk24 = '^f24';
+
+# program attention keys
+pa1 = '\EP';
+pa2 = '\EQ';
+pa3 = '\ER';
+
+# other keys
+
+    centsign = '^\';
+# cursel = '\E.'; # find out what this does
+master_reset = '^g';
+
+# local control keys
+
+reset = '^t';	# well, there is a little confusion here...
+flinp = '^x';
+reshow = '^v';	# redisplay screen
+escape = '^c';	# escape to telnet command mode
+
+# local editing keys
+settab = '\E;';
+clrtab = '\E:';
+setmrg = '\E\'';
+sethom = '\E!';
+coltab = '\Ei';
+colbak = '\Eb';
+indent = '\El';
+undent = '\Eh';
+
+} # end of h19
+
+
+co | c100 | concept | c100-4p | concept100 {
+enter = '^m';
+clear = '^z' | '^\2';
+
+nl = '^n';
+tab = '^i';
+btab = '^b';
+left = '^h' | '\E>';
+right = '^l' | '\E=';
+up = '^k' | '\E;';
+down = '^j' | '\E<';
+home = '\E?';
+
+delete = '^d' | '^?' | '^\1';
+eeof = '^e' | '^\3';
+einp = '^w';
+insrt = '^\0';
+
+# pf keys
+pfk1 = '\E\E1' | '^\5'; pfk2 = '\E\E2' | '^\6'; pfk3 = '\E\E3' | '^\7';
+pfk4 = '\E\E4' | '^\8'; pfk5 = '\E\E5' | '^\9'; pfk6 = '\E\E6' | '^\:';
+pfk7 = '\E\E7' | '^\;'; pfk8 = '\E\E8' | '^\<'; pfk9 = '\E\E9' | '^\=';
+pfk10 = '\E\E0' | '^\>'; pfk11 = '\E\E-' | '^\?'; pfk12 = '^\@';
+pfk13 = '^\A'; pfk14 = '^\B'; pfk15 = '^\)'; pfk16 = '^\*';
+pfk17 = '^\+'; pfk18 = '^\,'; pfk19 = '^\-'; pfk20 = '^\.';
+pfk21 = '^\/'; pfk22 = '^\C'; pfk23 = '^\D'; pfk24 = '^\E';
+
+    pfk1 = '\E1'; pfk2 = '\E2'; pfk3 = '\E3'; pfk4 = '\E4';
+    pfk5 = '\E5'; pfk6 = '\E6'; pfk7 = '\E7'; pfk8 = '\E8';
+    pfk9 = '\E9'; pfk10 = '\E0'; pfk11 = '\E-'; pfk12 = '^f12';
+    pfk13 = '^f13'; pfk14 = '^f14'; pfk15 = '^f15'; pfk16 = '^f16';
+    pfk17 = '^f17'; pfk18 = '^f18'; pfk19 = '^f19'; pfk20 = '^f20';
+    pfk21 = '^f21'; pfk22 = '^f22'; pfk23 = '^f23'; pfk24 = '^f24';
+
+# program attention keys
+pa1 = '^\%';
+pa2 = '^\&' | '\E+';
+pa3 = '^\\'';
+
+# other keys
+cursel = '\E.';
+aplon = '\E{';
+aplend = '\E}';
+aploff = '\E_';
+master_reset = '^g';
+centsign = '\E\\';
+
+# local control keys
+
+reset = '^t';	# well, there is a little confusion here...
+flinp = '^x';
+reshow = '^v';	# redisplay screen
+escape = '^c';	# escape to telnet command mode
+
+# local editing keys
+settab = '\E\E;';
+clrtab = '\E\E:';
+setmrg = '\E\E*';
+sethom = '\E\E!';
+coltab = '\E\Ei';
+colbak = '\E\Eb';
+indent = '\E\El';
+undent = '\E\Eh';
+
+} # end of concept
+avt | avt-8p-s | avt-4p-s | avt-rv {
+enter = '^m';
+clear = '^z' | '\EOM';
+
+nl = '^?';
+tab = '^i';
+btab = '^b';
+left = '^h' | '\E[D';
+right = '^l' | '\E[C';
+up = '^k' | '\E[A';
+down = '^j' | '\E[B';
+home = '\EOn';
+
+delete = '^d';
+eeof = '^e';
+einp = '^w';
+insrt = '^ ' | '\E ';
+
+# pf keys
+pfk1 = '\EOq' | '\E1'; pfk2 = '\EOr' | '\E2'; pfk3 = '\EOs' | '\E3';
+pfk4 = '\EOt' | '\E4'; pfk5 = '\EOu' | '\E5'; pfk6 = '\EOv' | '\E6';
+pfk7 = '\EOw' | '\E7'; pfk8 = '\EOx' | '\E8'; pfk9 = '\EOy' | '\E9';
+pfk10 = '\EOP\EOp' | '\E0'; pfk11 = '\EOP\EOq' | '\E-';
+pfk12 = '\EOP\EOr' | '\E='; pfk13 = '\EOP\EOs' | '^f13';
+pfk14 = '\EOP\EOt' | '^f14'; pfk15 = '\EOP\EOu' | '^f15';
+pfk16 = '\EOP\EOv' | '^f16'; pfk17 = '\EOP\EOw' | '^f17';
+pfk18 = '\EOP\EOx' | '^f18'; pfk19 = '\EOP\EOy' | '^f19';
+pfk20 = '\EOQ\EOp' | '^f20'; pfk21 = '\EOQ\EOq' | '^f21';
+
+    pfk22 = '^f22'; pfk23 = '^f23'; pfk24 = '^f24';
+
+# program attention keys
+pa1 = '\E\EOP' | '^p1';
+pa2 = '\E\EOQ' | '^p2';
+
+# local control keys
+
+escape = '^c';	# escape to telnet command mode
+master_reset = '^g';
+    centsign = '^\';
+
+# local editing keys
+settab = '\E;';
+deltab = '\E\'';
+clrtab = '\E:';
+setmrg = '\E,';
+sethom = '\E.';
+coltab = '\E\E[B';
+colbak = '\E\E[A';
+indent = '\E\E[C';
+undent = '\E\E[D';
+}    # end of avt, etc.
+
+tvipt | vp | televideopt {
+    enter = '^m';
+    clear = '^z';
+
+ nl = '^n';
+    tab = '^i';
+    btab = '^b';
+    left = '^h';
+    right = '^l';
+    up = '^k';
+    down = '^j';
+    home = '^^';
+
+    delete = '^?';
+    eeof = '^e';
+    einp = '^w';
+    insrt = '\E ';
+
+    # pf keys
+    pfk1 = '\E1' | '^A@^m';
+    pfk2 = '\E2' | '^AA^m';
+    pfk3 = '\E3' | '^AB^m';
+    pfk4 = '\E4' | '^AC^m';
+    pfk5 = '\E5' | '^AD^m';
+    pfk6 = '\E6' | '^AE^m';
+    pfk7 = '\E7' | '^AF^m';
+    pfk8 = '\E8';
+    pfk9 = '\E9';
+    pfk10 = '\E0';
+    pfk11 = '\E!' | '\E^A@^m';
+    pfk12 = '\E@' | '\E^AA^m';
+    pfk13 = '\E#' | '\E^AB^m';
+    pfk14 = '\E$' | '\E^AC^m';
+    pfk15 = '\E%' | '\E^AD^m';
+    pfk16 = '\E^AE^m' | '\E\^';
+    pfk17 = '\E&' | '\E^AF^m';
+    pfk18 = '\E*';
+    pfk19 = '\E(';
+    pfk20 = '\E)';
+
+    # program attention keys
+    pa1 = '^AG^m';
+    pa2 = '^AH^m';
+    pa3 = '^AI^m';
+
+    # other keys
+#    # cursel = '\E.';
+    centsign = '^\';
+
+    # local control keys
+
+    reset = '^t';	# well, there is a little confusion here...
+    master_reset = '^g';
+    flinp = '^x';
+    reshow = '^v';	# redisplay screen
+    escape = '^c';	# escape to telnet command mode
+
+    # local editing keys
+    settab = '\E;';
+    clrtab = '\E:';
+    setmrg = '\E[';
+    sethom = '\E+';
+    coltab = '\Ei' | '\EI';
+    colbak = '\Eb' | '\EB';
+    indent = '\El' | '\EL';
+    undent = '\Eh' | '\EH';
+} # end of tvipt
+vt100 | vt100nam | pt100 | vt125 | vt102 | direct831 | tek4125 | pcplot |        microvax | vt220 | vt320 | xterm{
+enter = '^m';
+clear = '^z' | '\EOM';
+
+nl = '^j';
+tab = '^i';
+btab = '^b';
+left = '^h' | '\E[D' | '\EOD';
+right = '^l' | '\E[C' | '\EOC';
+up = '^k' | '\E[A' | '\EOA';
+down = '\E[B' | '\EOB';
+home = '\EOn';
+
+delete = '^d' | '^?';
+eeof = '^e';
+einp = '^w';
+insrt = '^ ' | '\E ';
+
+# pf keys
+pfk1 = '\EOq' | '\E1'; pfk2 = '\EOr' | '\E2'; pfk3 = '\EOs' | '\E3';
+pfk4 = '\EOt' | '\E4'; pfk5 = '\EOu' | '\E5'; pfk6 = '\EOv' | '\E6';
+pfk7 = '\EOw' | '\E7'; pfk8 = '\EOx' | '\E8'; pfk9 = '\EOy' | '\E9';
+pfk10 = '\EOP\EOp' | '\E0'; pfk11 = '\EOP\EOq' | '\E-';
+pfk12 = '\EOP\EOr' | '\E='; pfk13 = '\EOP\EOs' | '^f13';
+pfk14 = '\EOP\EOt' | '^f14'; pfk15 = '\EOP\EOu' | '^f15';
+pfk16 = '\EOP\EOv' | '^f16'; pfk17 = '\EOP\EOw' | '^f17';
+pfk18 = '\EOP\EOx' | '^f18'; pfk19 = '\EOP\EOy' | '^f19';
+pfk20 = '\EOQ\EOp' | '^f20'; pfk21 = '\EOQ\EOq' | '^f21';
+
+# program attention keys
+pa1 = '\E\EOP' | '^p1';
+pa2 = '\E\EOQ' | '^p2';
+
+# local control keys
+
+escape = '^c';	# escape to telnet command mode
+master_reset = '^g';
+    centsign = '^\';
+
+# local editing keys
+settab = '\E;';
+deltab = '\E\'';
+clrtab = '\E:';
+setmrg = '\E,';
+sethom = '\E.';
+coltab = '\E\E[B';
+colbak = '\E\E[A';
+indent = '\E\E[C';
+undent = '\E\E[D';
+}    # end of vt100, etc.
+
+sun  {
+    enter = '^m';
+    clear = '^z' | '\E[222z';
+
+    nl = '^j';
+    tab = '^i';
+    btab = '^b' | '\E[195z' | '\E[216z';
+    left = '^h' | '\E[D' | '\EOD';
+    right = '^l' | '\E[C' | '\EOC';
+    up = '^k' | '\E[A' | '\EOA';
+    down = '\E[B' | '\EOB';
+    home = '\E[218z';
+
+    delete = '^d' | '^?';
+    eeof = '^e' | '\E[214z';
+    einp = '^w' | '\E[213z';
+    insrt = '\E ' | '\E[220z';
+    dp = '^u';
+    fm = '^y';
+
+    # pf keys
+    pfk1 = '\E[224z' | '\E1'; pfk2 = '\E[225z' | '\E2';
+    pfk3 = '\E[226z' | '\E3'; pfk4 = '\E[227z' | '\E4';
+    pfk5 = '\E[228z' | '\E5'; pfk6 = '\E[229z' | '\E6';
+    pfk7 = '\E[230z' | '\E7'; pfk8 = '\E[231z' | '\E8';
+    pfk9 = '\E[232z' | '\E9'; pfk10 = '\E[208z' | '\E0';
+    pfk11 = '\E[209z' | '\E-'; pfk12 = '\E[210z' | '\E=';
+    pfk13 = '^f13'; pfk14 = '^f14'; pfk15 = '^f15'; pfk16 = '^f16';
+    pfk17 = '^f17'; pfk18 = '^f18'; pfk19 = '^f19'; pfk20 = '^f20';
+    pfk21 = '^f21'; pfk22 = '^f22'; pfk23 = '^f23'; pfk24 = '^f24';
+
+    # program attention keys
+    pa1 = '^p1' | '\E[211z';
+    pa2 = '^p2' | '\E[212z';
+    pa3 = '^p3';
+
+    # other keys
+    cursel = '\E.';
+    centsign = '^\';
+
+    # local control keys
+
+    reset = '^t';	# well, there is a little confusion here...
+    master_reset = '^g';
+    flinp = '^x';
+    reshow = '^v';	# redisplay screen
+    escape = '^c';	# escape to telnet command mode
+
+    # local editing keys
+    settab = '\E;';
+    clrtab = '\E+';
+    setmrg = '\E(';
+    sethom = '\E!';
+    coltab = '\Ei';
+    colbak = '\Eb';
+    indent = '\El';
+    undent = '\Eh';
+} # end of sun
+#
+# Works with /usr/ucb/tn3270 except tn3270pc which requires /usr/new/tn3270.
+#
+msk22714 | mskermit22714 | msk227 | mskermit227 {
+#
+# 9-5-86 gts
+# MS-Kermit UCB 227.14 to Unix then tn3270 to CMS.
+# Includes underlying ADM3A keystrokes for full S/1 compatibiliy.
+# Attempts to work for both "do unix" and "do cms" keyboards.  Differences are
+# marked with (C) for CMS only or (U) for Unix only.  Incidental effects are
+# enclosed in square brackets [].
+# New functions WERASE Ctrl-\  and FERASE Ctrl-_.
+
+    enter = '^m';					# <--'
+    clear = '^z';					# keypad + (C)
+
+    nl    = '^n';					# keypad End (C)
+    tab   = '^i';					# --->|
+    btab  = '^b'  | '\E^I';				# |<--- (C|U)
+    left  = '^h';					# keypad Left
+    right = '^l';					# keypad Right
+    up    = '^k';					# keypad Up
+    down  = '^j'  | '\EB';				# keypad Down (U|C)
+							# [ keypad End (U) ]
+    home  = '^^'  | '^@';				# keypad Home (U|C)
+    dp    = '^u'  | '^a';				# [ keypad PgUp (U) ]
+    fm    = '^y';
+
+    delete = '^d' | '^?';				# keypad Del
+							# [ keypad PgDn (U) ]
+    eeof   = '^e';
+    einp   = '^w';					# keypad - (C)
+    insrt  = '\E ' | '\Ei';				# keypad Ins (C|U)
+
+    # pf keys IBM PC/XT/AT and ADM3A Esc d
+    pfk1 = '\E1'; pfk2 = '\E2'; pfk3 = '\E3'; pfk4 = '\E4'; pfk5 = '\E5';
+    pfk6 = '\E6'; pfk7 = '\E7'; pfk8 = '\E8'; pfk9 = '\E9'; pfk10= '\E0';
+    # pf keys IBM PC/XT/AT Shift and ADM3A Ctrl-F nn
+    pfk11='^f11'; pfk12='^f12'; pfk13='^f13'; pfk14='^f14'; pfk15='^f15';
+    pfk16='^f16'; pfk17='^f17'; pfk18='^f18'; pfk19='^f19'; pfk20='^f20';
+    # pf keys IBM PC/XT/AT Ctrl- and ADM3A Ctrl-F nn
+    pfk21='^f21'; pfk22='^f22'; pfk23='^f23'; pfk24='^f24'; pfk25='^f25';
+    pfk26='^f26'; pfk27='^f27'; pfk28='^f28'; pfk29='^f29'; pfk30='^f30';
+    # pf keys IBM PC/XT/AT Ctrl-Shift- and ADM3A Ctrl-F nn
+    pfk31='^f31'; pfk32='^f32'; pfk33='^f33'; pfk34='^f34'; pfk35='^f35';
+    pfk36='^f36';
+    # pf keys IBM PC/XT/AT Alt-1 to Alt-= (generated as, Esc d, ^F 11, ^F 12)
+    # pf keys ADM3A Esc d           (d = 1 to 0 interpreted as above)
+    pfk11 = '\E-'; pfk12 = '\E=';
+
+    # program attention keys (same as ADM3A)
+    pa1 = '^p1';					# Alt-F1
+    pa2 = '^p2';					# Alt-F2
+    pa3 = '^p3';					# Alt-F3
+   #pa4 = '^p4';					# Alt-F3
+   #testreq = '^pr' | '^pR';				# Alt-F5
+
+    # other keys
+    cursel = '\E.';
+    werase = '^\';
+    ferase = '^_';
+
+    # local control keys
+    master_reset = '^g';
+    reset  = '^r'  | '^t';
+    flinp  = '^x';
+    reshow = '^v';
+    escape = '^c';					# escape to telnet
+
+    # local editing keys
+    settab = '\E;';
+    deltab = '\E\'';
+    clrtab = '\E:' | '\E+';
+    setmrg = '\E(';
+    sethom = '\E!';
+    coltab = '\EI';
+   #coltab = '\Ei' | '\EI';				# cannot use Esc i
+    colbak = '\Eb';					# on S/1 \EB is down
+   #colbak = '\Eb' | '\EB';				# cannot use Esc B
+    indent = '\El' | '\EL';
+    undent = '\Eh' | '\EH';				# on S/1 \EH is Home
+
+} # end of msk22714
+#
+ansisys | ansisysk | nansisys | nansisysk {
+#
+# 9-5-86 gts
+# IBM PC/XT/AT using the ansi.sys | ansi.sysk | nansi.sys | nansi.sysk termcaps.
+#
+# PROBLEM: cannot use periods in termcap name until mset fixed (gts 9-5-86).
+#
+# PROBLEM: cannot use eval `mset ...` until Unix csh changed to allow more
+# than 1024 characters in an environment string or until mset changed to
+# return only the filename if the resulting string is longer than 1024.
+#
+# PROBLEM when NUL (^@) immediately follows a Return:  Unix telent apparently
+# ignores the NUL!  (Can tn3270 negotiate a different newline?)
+#
+# Nearly identical to the map3270 for the IBM PC TN3270, which itself is nearly
+# identical to the MS-Kermit UCB 227.14 keyboard which in turn was a  modest
+# improvement of the BIJOU Yterm keyboard.  See HELP TN3270PC on CMS.
+# Includes the underlying ADM3A keystrokes for full S/1 compatibility.
+# Adds some Ctrl-keypad keys to compensate for TN3270 ROMBIOS dependency
+# which prevents separate use of the keypad plus and minus keys.
+# Adds new functions WERASE and FERASE.
+#
+
+    enter = '^m';					# <--'
+    clear = '^z' | '^@w';				# Ctrl-Home
+
+    nl    = '^n'  | '^@O';				# keypad End
+    tab   = '^i';					# --->|
+    btab  = '^b'  | '^@^O';				# |<---
+    left  = '^h'  | '^@K';				# keypad Left
+    right = '^l'  | '^@M';				# keypad Right
+    up    = '^k'  | '^@H';				# keypad Up
+    down  = '^j'  | '^@P';				# keypad Down
+    home  = '^^'  | '^@G';				# keypad Home
+							# (cannot use Ctrl-@)
+    dp    = '^u';
+    fm    = '^y';
+
+    delete = '^d'  | '^?'  | '^@S';			# keypad Del
+    eeof   = '^e'  | '^@u';				# keypad Ctrl-End
+    einp   = '^w';
+    insrt  = '\E ' | '^@R' | '\E\Ei';			# keypad Ins
+
+    # pf keys IBM PC/XT/AT
+    pfk1 = '^@;'; pfk2 = '^@<'; pfk3 = '^@='; pfk4 = '^@>'; pfk5 = '^@?';
+    pfk6 = '^@@'; pfk7 = '^@A'; pfk8 = '^@B'; pfk9 = '^@C'; pfk10= '^@D';
+    # pf keys IBM PC/XT/AT Shift
+    pfk11 = '^@T'; pfk12 = '^@U'; pfk13 = '^@V'; pfk14 = '^@W';  pfk15 = '^@X';
+    pfk16 = '^@Y'; pfk17 = '^@Z'; pfk18 = '^@['; pfk19 = '^@\\'; pfk20 = '^@]';
+    # pf keys IBM PC/XT/AT Ctrl-
+    pfk21 = '^@\^';pfk22 = '^@_'; pfk23 = '^@`'; pfk24 = '^@a';  pfk25 = '^@b';
+    pfk26 = '^@c'; pfk27 = '^@d'; pfk28 = '^@e'; pfk29 = '^@\f'; pfk30 = '^@g';
+    # pf keys IBM PC/XT/AT Ctrl-Shift-   (cannot be done yet with  PC tn3270)
+    # pf keys IBM PC/XT/AT Alt-d
+    pfk1 = '^@x'; pfk2 = '^@y'; pfk3 = '^@z'; pfk4 = '^@{'; pfk5 = '^@|';
+    pfk6 = '^@}'; pfk7 = '^@~'; pfk8 = '^@^?';pfk9 = '^@^@';pfk10= '^@^A';
+    pfk11='^@^B'; pfk12= '^@^C';
+
+    # pf keys ADM3A Esc d
+    pfk1 = '\E1'; pfk2 = '\E2'; pfk3 = '\E3'; pfk4 = '\E4'; pfk5 = '\E5';
+    pfk6 = '\E6'; pfk7 = '\E7'; pfk8 = '\E8'; pfk9 = '\E9'; pfk10= '\E0';
+    pfk11 = '\E-'; pfk12 = '\E=';
+    # pf keys ADM3A Ctrl-F n n
+    pfk1 = '^f01'; pfk2 = '^f02'; pfk3 = '^f03'; pfk4 = '^f04'; pfk5= '^f05';
+    pfk6 = '^f06'; pfk7 = '^f07'; pfk8 = '^f08'; pfk9 = '^f09'; pfk10= '^f10';
+    pfk11= '^f11'; pfk12= '^f12'; pfk13= '^f13'; pfk14= '^f14'; pfk15= '^f15';
+    pfk16= '^f16'; pfk17= '^f17'; pfk18= '^f18'; pfk19= '^f19'; pfk20= '^f20';
+    pfk21= '^f21'; pfk22= '^f22'; pfk23= '^f23'; pfk24= '^f24'; pfk25= '^f25';
+    pfk26= '^f26'; pfk27= '^f27'; pfk28= '^f28'; pfk29= '^f29'; pfk30= '^f30';
+    pfk31= '^f31'; pfk32= '^f32'; pfk33= '^f33'; pfk34= '^f34'; pfk35= '^f35';
+    pfk36= '^f36';
+
+    # program attention keys
+    pa1 = '^p1' | '^@h';				# Alt-F1
+    pa2 = '^p2' | '^@i';				# Alt-F2
+    pa3 = '^p3' | '^@j';				# Alt-F3
+   #pa4 = '^p4' | '^@k';				# Alt-F4
+   #testreq = '^pr' | '^pR' | '^@l'			# Alt-F5
+
+    # other keys
+    cursel = '\E.';
+    werase = '^\';
+    ferase = '^_';
+    pfk7 = '^@I'    | '\E^U';				# keypad PgUp
+    pfk8 = '^@Q'    | '\E^D';				# keypad PgDn
+
+    # local control keys
+    reset  = '^r' | '^t';
+    master_reset = '^g';
+    flinp  = '^x';
+    reshow = '^v';
+    escape = '^c';		# escape to TN3270 command prompt
+
+    # local editing keys
+    settab = '\E;';
+    deltab = '\E\'';
+    clrtab = '\E:' | '\E+';
+    setmrg = '\E(';
+    sethom = '\E!';
+    coltab = '\Ei' | '\EI';
+    colbak = '\Eb' | '\EB';		# on S/1 \EB is down
+    indent = '\El' | '\EL';
+    undent = '\Eh' | '\EH';		# on S/1 \EH is Home
+
+} # end of ansi.sys
+#
+tn3270pc | ibm-3278-2 {
+#
+# 2-14-87 gts
+#
+# MAP3270 for the IBM PC logged into Unix with PC TN3270 with TERM=nansisys,
+# nansisysk, ansisys or ansisysk, hence requires KETBD=tn3270pc.
+#
+# MAP3270 for the IBM PC
+# Nearly identical to the MS-Kermit UCB 227.14 keyboard which in turn was
+# an modest improvement of the BIJOU Yterm keyboard.
+# Includes underlying ADM3A keystrokes for full S/1 compatibiliy.
+# Adds some Ctrl-keypad keys to compensate for TN3270 ROMBIOS dependency
+# which prevents separate use of the keypad plus and minus keys, and adds
+# new functions WERASE, FERASE, WORDTAB, WORDBACKTAB, WORDEND and FIELDEND.
+# Where possible these extensions are compatible with IBM PC keystroke usage
+# (see XT technical reference manual Keyboard Usage Guidelines).
+# Includes F11 and F12 keys from the new IBM PC/XT/AT keyboard.
+#
+
+    centsign = '\Ec' | '\EC';				# CentSign for input
+    enter = '^m';					# <--'
+    clear = '^z' | '^Aw';				# Ctrl-Home
+
+    nl    = '^n'  | '^AO';				# keypad End
+    tab   = '^i';					# --->|
+    btab  = '^b'  | '\E^I' | '^A^O';			# |<---
+    left  = '^h'  | '^AK';				# keypad Left
+    right = '^l'  | '^AM';				# keypad Right
+    up    = '^k'  | '^AH';				# keypad Up
+    down  = '^j'  | '^AP';				# keypad Down
+    home  = '^^'  | '^AG'  | '^@';			# keypad Home
+    dp    = '^u';
+    fm    = '^y';
+
+    delete = '^d' | '^AS';				# keypad Del
+    eeof = '^e'  | '^Au';				# keypad End
+    einp = '^w';
+    insrt = '\E ' | '^AR';				# keypad Ins
+
+    # pf keys IBM PC/XT/AT
+    pfk1 = '^A;'; pfk2 = '^A<'; pfk3 = '^A='; pfk4 = '^A>'; pfk5 = '^A?';
+    pfk6 = '^A@'; pfk7 = '^AA'; pfk8 = '^AB'; pfk9 = '^AC'; pfk10= '^AD';
+    # pf keys IBM PC/XT/AT Shift
+    pfk11 = '^AT'; pfk12 = '^AU'; pfk13 = '^AV'; pfk14 = '^AW';  pfk15 = '^AX';
+    pfk16 = '^AY'; pfk17 = '^AZ'; pfk18 = '^A['; pfk19 = '^A\\'; pfk20 = '^A]';
+    # pf keys IBM PC/XT/AT Ctrl-
+    pfk21 = '^A\^';pfk22 = '^A_'; pfk23 = '^A`'; pfk24 = '^Aa'; pfk25 = '^Ab';
+    pfk26 = '^Ac'; pfk27 = '^Ad'; pfk28 = '^Ae'; pfk29 = '^Af'; pfk30 = '^Ag';
+    # pf keys IBM PC/XT/AT Alt-d
+    pfk1 = '^Ax'; pfk2 = '^Ay'; pfk3 = '^Az'; pfk4 = '^A{'; pfk5 = '^A|';
+    pfk6 = '^A}'; pfk7 = '^A~'; pfk8 = '^A^?';pfk9 = '^A^A^@';pfk10= '^A^A^A';
+    pfk11='^A^A^b'; pfk12= '^A^A^c';
+    # pf keys NEW IBM PC/XT/AT Keyboard
+    pfk11='^A^A^e'; pfk12= '^A^A^f';
+
+    # pf keys ADM3A Esc d
+    pfk1 = '\E1'; pfk2 = '\E2'; pfk3 = '\E3'; pfk4 = '\E4'; pfk5 = '\E5';
+    pfk6 = '\E6'; pfk7 = '\E7'; pfk8 = '\E8'; pfk9 = '\E9'; pfk10= '\E0';
+    pfk11 = '\E-'; pfk12 = '\E=';
+    # pf keys ADM3A Ctrl-F n n
+    pfk1 = '^f01'; pfk2 = '^f02'; pfk3 = '^f03'; pfk4 = '^f04'; pfk5= '^f05';
+    pfk6 = '^f06'; pfk7 = '^f07'; pfk8 = '^f08'; pfk9 = '^f09'; pfk10= '^f10';
+    pfk11= '^f11'; pfk12= '^f12'; pfk13= '^f13'; pfk14= '^f14'; pfk15= '^f15';
+    pfk16= '^f16'; pfk17= '^f17'; pfk18= '^f18'; pfk19= '^f19'; pfk20= '^f20';
+    pfk21= '^f21'; pfk22= '^f22'; pfk23= '^f23'; pfk24= '^f24'; pfk25= '^f25';
+    pfk26= '^f26'; pfk27= '^f27'; pfk28= '^f28'; pfk29= '^f29'; pfk30= '^f30';
+    pfk31= '^f31'; pfk32= '^f32'; pfk33= '^f33'; pfk34= '^f34'; pfk35= '^f35';
+    pfk36= '^f36';
+
+    # program attention keys
+    pa1 = '^p1' | '^Ah';				# Alt-F1
+    pa2 = '^p2' | '^Ai';				# Alt-F2
+    pa3 = '^p3' | '^Aj';				# Alt-F3
+    treq = '^pr' | '^pR' | '^Al';			# Alt-F5
+
+    # other keys
+    cursel = '\E.';
+    werase = '^\';
+    ferase = '^_';
+    wordtab = '^At';					# Ctrl-Right
+    wordbacktab = '^As';				# Ctrl-Left
+    wordend = '^A^A^d';					# Ctrl-PgUp
+    fieldend = '^Av';					# Ctrl-PgDn
+    pfk7 = '^AI';					# keypad PgUp
+    pfk8 = '^AQ';					# keypad PgDn
+
+    # local control keys
+    reset  = '^r' | '^t';
+    master_reset = '^g';
+    flinp  = '^x';
+    reshow = '^v';
+    escape = '^c';					# to command prompt
+    disc   = '^pS1D';					# disconnect (suspend)?
+    sync   = '^pS1S';					# in sync with user?
+
+    # local editing keys
+    settab = '\E;';
+    deltab = '\E\'';
+    clrtab = '\E:' | '\E+';
+    setmrg = '\E(';
+    sethom = '\E!';
+    coltab = '\Ei' | '\EI';
+    colbak = '\Eb' | '\EB';				# on S/1 \EB is down
+    indent = '\El' | '\EL';
+    undent = '\Eh' | '\EH';				# on S/1 \EH is Home
+
+} # end of tn3270pc
diff --git a/share/termtypes/termcap.5 b/share/termtypes/termcap.5
new file mode 100644
index 00000000000..a8912073752
--- /dev/null
+++ b/share/termtypes/termcap.5
@@ -0,0 +1,1858 @@
+.\" Copyright (c) 1985, 1991 The Regents of the University of California.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\"    must display the following acknowledgement:
+.\"	This product includes software developed by the University of
+.\"	California, Berkeley and its contributors.
+.\" 4. Neither the name of the University nor the names of its contributors
+.\"    may be used to endorse or promote products derived from this software
+.\"    without specific prior written permission.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.\"     from: @(#)termcap.5	6.11 (Berkeley) 3/6/93
+.\"	$Id: termcap.5,v 1.1 1998/12/07 18:23:36 millert Exp $
+.\"
+.Dd March 6, 1993
+.Dt TERMCAP 5
+.Os BSD 3
+.Sh NAME
+.Nm termcap
+.Nd terminal capability data base
+.Sh SYNOPSIS
+.Nm termcap
+.Sh DESCRIPTION
+The
+.Nm Termcap
+file
+is a data base describing terminals,
+used,
+for example,
+by
+.Xr \&vi 1
+and
+.Xr curses 3 .
+Terminals are described in
+.Nm termcap
+by giving a set of capabilities that they have and by describing
+how operations are performed.
+Padding requirements and initialization sequences
+are included in
+.Nm termcap .
+.Pp
+Entries in
+.Nm termcap
+consist of a number of `:'-separated fields.
+The first entry for each terminal gives the names that are known for the
+terminal, separated by `|' characters.
+The first name given is the most common abbreviation for the terminal.
+The last name given should be a long name fully identifying the terminal,
+and all others are understood as synonyms for the terminal name.
+All names but the last should be in lower case and contain no blanks;
+the last name may well contain upper case characters and blanks for
+readability.
+.Pp
+Terminal names (except for the last, verbose entry)
+should be chosen using the following conventions.
+The particular piece of hardware making up the terminal
+should have a root name chosen, thus
+.Dq hp2621
+This name should not contain hyphens.
+Modes that the hardware can be in
+or user preferences
+should be indicated by appending a hyphen and an indicator of the mode.
+Therefore, a
+.Dq vt100
+in 132-column mode would be
+.Dq vt100-w .
+The following suffixes should be used where possible:
+.Pp
+.Bd -filled -offset indent
+.Bl -column indent "With automatic margins (usually default)xx"
+.Sy Suffix	Meaning	Example
+-w	Wide mode (more than 80 columns)	vt100-w
+-am	With automatic margins (usually default)	vt100-am
+-nam	Without automatic margins	vt100-nam
+.Pf \- Ar n Ta No "Number of lines on screen	aaa-60"
+-na	No arrow keys (leave them in local)	concept100-na
+.Pf \- Ar \&np Ta No "Number of pages of memory	concept100-4p"
+-rv	Reverse video	concept100-rv
+.El
+.Ed
+.Sh CAPABILITIES
+The characters in the
+The
+.Em Notes
+function
+field in the table have the following meanings
+(more than one may apply to a capability):
+.Pp
+.Bd -unfilled -offset indent
+N	indicates numeric parameter(s)
+P	indicates that padding may be specified
+*	indicates that padding may be based on the number of lines affected
+o	indicates capability is obsolete
+.Ed
+.Pp
+.Dq Obsolete
+capabilities have no
+.Em terminfo
+equivalents,
+since they were considered useless,
+or are subsumed by other capabilities.
+New software should not rely on them at all.
+.Pp
+.Bl -column indent indent indent
+.Sy Name	Type	Notes	Description
+functions
+.It "ae	str	(P)	End alternate character set."
+.It AL	str	(NP*)	Add"
+.Em n
+new blank lines
+.It "al	str	(P*)	Add new blank line."
+.It "am	bool		Terminal has automatic margins."
+.It "as	str	(P)	Start alternate character set."
+.It "bc	str	(o)	Backspace if not."
+.Sy \&^H .
+.It "bl	str	(P)	Audible signal (bell)."
+.It "bs	bool	(o)	Terminal can backspace with"
+.Sy \&^H .
+.It "bt	str	(P)	Back tab."
+.It "bw	bool	" Ta Sy \&le
+(backspace) wraps from column 0 to last column.
+.It "CC	str		Terminal settable command character in prototype."
+.It "cd	str	(P*)	Clear to end of display."
+.It "ce	str	(P)	Clear to end of line."
+.It "ch	str	(NP)	Set cursor column (horizontal position)."
+.It "cl	str	(P*)	Clear screen and home cursor."
+.It "CM	str	(NP)	Memory-relative cursor addressing."
+.It "cm	str	(NP)	Screen-relative cursor motion."
+.It "co	num		Number of columns in a line (See"
+.Sx BUGS
+section below).
+.It "cr	str	(P)	Carriage return."
+.It "cs	str	(NP)	Change scrolling region (VT100)."
+.It "ct	str	(P)	Clear all tab stops."
+.It "cv	str	(NP)	Set cursor row (vertical position)."
+.It "da	bool		Display may be retained above the screen."
+.It "dB	num	(o)	Milliseconds of"
+.Sy \&bs
+delay needed (default 0).
+.It "db	bool		Display may be retained below the screen."
+.It "DC	str	(NP*)	Delete"
+.Em n
+characters.
+.It "dC	num	(o)	Milliseconds of"
+.Sy \&cr
+delay needed (default 0).
+.It "dc	str	(P*)	Delete character."
+.It "dF	num	(o)	Milliseconds of"
+.Sy \&ff
+delay needed (default 0).
+.It "DL	str	(NP*)	Delete"
+.Ar n
+lines.
+.It "dl	str	(P*)	Delete line."
+.It "dm	str		Enter delete mode."
+.It "dN	num	(o)	Milliseconds of
+.Sy \&nl
+delay needed (default 0).
+.It "DO	str	(NP*)	Move cursor down:
+.Ar n
+lines.
+.It "do	str		Down one line."
+.It "ds	str		Disable status line."
+.It "dT	num	(o)	Milliseconds of horizontal tab delay needed (default 0)."
+.It "dV	num	(o)	Milliseconds of vertical tab delay needed (default 0)."
+.It "ec	str	(NP)	Erase"
+.Ar n
+characters.
+.It "ed	str		End delete mode."
+.It "ei	str		End insert mode."
+.It "eo	bool		Can erase overstrikes with a blank."
+.It "EP	bool	(o)	Even parity."
+.It "es	bool		Escape can be used on the status line."
+.It "ff	str	(P*)	Hardcopy terminal page eject."
+.It "fs	str		Return from status line."
+.It "gn	bool		Generic line type, for example dialup, switch)."
+.It "hc	bool		Hardcopy terminal."
+.It "HD	bool	(o)	Half-duplex."
+.It "hd	str		Half-line down (forward 1/2 linefeed)."
+.It "ho	str	(P)	Home cursor."
+.It "hs	bool		Has extra"
+.Dq status line .
+.It "hu	str		Half-line up (reverse 1/2 linefeed)."
+.It "hz	bool		Cannot print ``~'' (Hazeltine)."
+.It "i1-i3	str		Terminal initialization strings"
+.Pf ( Xr terminfo
+only)
+.It "IC	str	(NP*)	Insert"
+.Ar n
+blank characters.
+.It "ic	str	(P*)	Insert character."
+.It "if	str		Name of file containing initialization string."
+.It "im	str		Enter insert mode."
+.It "in	bool		Insert mode distinguishes nulls."
+.It "iP	str		Pathname of program for initialization"
+.Pf ( Xr terminfo
+only).
+.It "ip	str	(P*)	Insert pad after character inserted."
+.It "is	str		Terminal initialization string"
+.Pf ( Nm termcap
+only).
+.It "it	num		Tabs initially every"
+.Ar n
+positions.
+.It "K1	str		Sent by keypad upper left."
+.It "K2	str		Sent by keypad center."
+.It "K3	str		Sent by keypad upper right."
+.It "K4	str		Sent by keypad lower left."
+.It "K5	str		Sent by keypad lower right."
+.It "k0-k9	str		Sent by function keys 0-9."
+.It "kA	str		Sent by insert-line key."
+.It "ka	str		Sent by clear-all-tabs key."
+.It "kb	str		Sent by backspace key."
+.It "kC	str		Sent by clear-screen or erase key."
+.It "kD	str		Sent by delete-character key."
+.It "kd	str		Sent by down-arrow key."
+.It "kE	str		Sent by clear-to-end-of-line key."
+.It "ke	str		Out of"
+.Dq keypad transmit
+mode.
+.It "kF	str		Sent by scroll-forward/down key."
+.It "kH	str		Sent by home-down key."
+.It "kh	str		Sent by home key."
+.It "kI	str		Sent by insert-character or enter-insert-mode key."
+.It "kL	str		Sent by delete-line key."
+.It "kl	str		Sent by left-arrow key."
+.It "kM	str		Sent by insert key while in insert mode."
+.It "km	bool		Has a"
+.Dq meta
+key (shift, sets parity bit).
+.It "kN	str		Sent by next-page key."
+.It "kn	num	(o)	Number of function"
+.Pq Sy \&k\&0 Ns \- Sy \&k\&9
+keys (default 0).
+.It "ko	str	(o)	Termcap entries for other non-function keys."
+.It "kP	str		Sent by previous-page key."
+.It "kR	str		Sent by scroll-backward/up key."
+.It "kr	str		Sent by right-arrow key."
+.It "kS	str		Sent by clear-to-end-of-screen key."
+.It "ks	str		Put terminal in"
+.Dq keypad transmit
+mode.
+.It "kT	str		Sent by set-tab key."
+.It "kt	str		Sent by clear-tab key."
+.It "ku	str		Sent by up-arrow key."
+.It "l0-l9	str		Labels on function keys if not"
+.Dq \&f Ns Em n .
+.It "LC	bool	(o)	Lower-case only."
+.It "LE	str	(NP)	Move cursor left"
+.Ar n
+positions.
+.It "le	str	(P)	Move cursor left one position."
+.It "li	num		Number of lines on screen or page (See"
+.Sx BUGS
+section below)
+.It "ll	str		Last line, first column
+.It "lm	num		Lines of memory if >" Sy \&li
+(0 means varies).
+.It "ma	str	(o)	Arrow key map (used by"
+.Xr \&vi
+version 2 only).
+.It "mb	str		Turn on blinking attribute."
+.It "md	str		Turn on bold (extra bright) attribute."
+.It "me	str		Turn off all attributes."
+.It "mh	str		Turn on half-bright attribute."
+.It "mi	bool		Safe to move while in insert mode."
+.It "mk	str		Turn on blank attribute (characters invisible)."
+.It "ml	str	(o)	Memory lock on above cursor."
+.It "mm	str		Turn on"
+.Dq meta mode
+(8th bit).
+.It "mo	str		Turn off"
+.Dq meta mode .
+.It "mp	str		Turn on protected attribute."
+.It "mr	str		Turn on reverse-video attibute."
+.It "ms	bool		Safe to move in standout modes."
+.It "mu	str	(o)	Memory unlock (turn off memory lock)."
+.It "nc	bool	(o)	No correctly-working"
+.Sy \&cr
+(Datamedia 2500, Hazeltine 2000).
+.It "nd	str		Non-destructive space (cursor right)."
+.It "NL	bool	(o)" Ta Sy \&\en No "is newline, not line feed."
+.It "nl	str	(o)	Newline character if not" Sy \en .
+.It "ns	bool	(o)	Terminal is a" Tn CRT No "but doesn't scroll."
+.It "nw	str	(P)	Newline (behaves like"
+.Sy \&cr
+followed by
+.Sy \&do ).
+.It "OP	bool	(o)	Odd parity."
+.It "os	bool		Terminal overstrikes."
+.It "pb	num		Lowest baud where delays are required."
+.It "pc	str		Pad character (default" Tn NUL ).
+.It "pf	str		Turn off the printer."
+.It "pk	str		Program function key"
+.Em n
+to type string
+.Em s
+.Pf ( Xr terminfo
+only).
+.It "pl	str		Program function key"
+.Em n
+to execute string
+.Em s
+.Pf ( Xr terminfo
+only).
+.It "pO	str	(N)	Turn on the printer for"
+.Em n
+bytes.
+.It "po	str		Turn on the printer."
+.It "ps	str		Print contents of the screen."
+.It "pt	bool	(o)	Has hardware tabs (may need to be set with"
+.Sy \&is ).
+.It "px	str		Program function key"
+.Em n
+to transmit string
+.Em s
+.Pf ( Xr terminfo
+only).
+.It "r1-r3	str		Reset terminal completely to sane modes"
+.Pf ( Xr terminfo
+only).
+.It "rc	str	(P)	Restore cursor to position of last"
+.Sy \&sc .
+.It "rf	str		Name of file containing reset codes."
+.It "RI	str	(NP)	Move cursor right"
+.Em n
+positions.
+.It "rp	str	(NP*)	Repeat character"
+.Em c n
+times.
+.It "rs	str		Reset terminal completely to sane modes"
+.Pf ( Nm termcap
+only).
+.It "sa	str	(NP)	Define the video attributes."
+.It "sc	str	(P)	Save cursor position."
+.It "se	str		End standout mode."
+.It "SF	str	(NP*)	Scroll forward"
+.Em n
+lines.
+.It "sf	str	(P)	Scroll text up."
+.It "sg	num		Number of garbage chars left by"
+.Sy \&so
+or
+.Sy \&se
+(default 0).
+.It "so	str		Begin standout mode."
+.It "SR	str	(NP*)	Scroll backward"
+.Em n
+lines.
+.It "sr	str	(P)	Scroll text down."
+.It "st	str		Set a tab in all rows, current column."
+.It "ta	str	(P)	Tab to next 8-position hardware tab stop."
+.It "tc	str		Entry of similar terminal \- must be last."
+.It "te	str		String to end programs that use"
+.Nm termcap .
+.It "ti	str		String to begin programs that use"
+.Nm termcap .
+.It "ts	str	(N)	Go to status line, column"
+.Em n .
+.It "UC	bool	(o)	Upper-case only."
+.It "uc	str		Underscore one character and move past it."
+.It "ue	str		End underscore mode."
+.It "ug	num		Number of garbage chars left by"
+.Sy \&us
+or
+.Sy \&ue
+(default 0).
+.It "ul	bool		Underline character overstrikes."
+.It "UP	str	(NP*)	Move cursor up"
+.Em n
+lines.
+.It "up	str		Upline (cursor up)."
+.It "us	str		Start underscore mode."
+.It "vb	str		Visible bell (must not move cursor)."
+.It "ve	str		Make cursor appear normal (undo"
+.Sy \&vs Ns / Sy \&vi ) .
+.It "vi	str		Make cursor invisible."
+.It "vs	str		Make cursor very visible."
+.It "vt	num		Virtual terminal number (not supported on all systems)."
+.It "wi	str	(N)	Set current window."
+.It "ws	num		Number of columns in status line."
+.It "xb	bool		Beehive"
+.Pf ( "f1=" Dv ESC ,
+.Pf "f2=" Sy \&^C ) .
+.It "xn	bool		Newline ignored after 80 cols (Concept)."
+.It "xo	bool		Terminal uses xoff/xon"
+.Pq Dv DC3 Ns / Ns Dv DC1
+handshaking.
+.It "xr	bool	(o)	Return acts like"
+.Sy "ce cr nl"
+(Delta Data).
+.It "xs	bool		Standout not erased by overwriting (Hewlett-Packard)."
+.It "xt	bool		Tabs ruin, magic"
+.SY \&so
+char (Teleray 1061).
+.It "xx	bool	(o)	Tektronix 4025 insert-line."
+.El
+.Ss A Sample Entry
+The following entry, which describes the Concept\-100, is among the more
+complex entries in the
+.Nm termcap
+file as of this writing.
+.Pp
+.Bd -literal
+ca\||\|concept100\||\|c100\||\|concept\||\|c104\||\|concept100-4p\||\|HDS Concept\-100:\e
+	:al=3*\eE^R:am:bl=^G:cd=16*\eE^C:ce=16\eE^U:cl=2*^L:cm=\eEa%+ %+ :\e
+	:co#80:.cr=9^M:db:dc=16\eE^A:dl=3*\eE^B:do=^J:ei=\eE\e200:eo:im=\eE^P:in:\e
+	:ip=16*:is=\eEU\eEf\eE7\eE5\eE8\eEl\eENH\eEK\eE\e200\eEo&\e200\eEo\e47\eE:k1=\eE5:\e
+	:k2=\eE6:k3=\eE7:kb=^h:kd=\eE<:ke=\eEx:kh=\eE?:kl=\eE>:kr=\eE=:ks=\eEX:\e
+	:ku=\eE;:le=^H:li#24:mb=\eEC:me=\eEN\e200:mh=\eEE:mi:mk=\eEH:mp=\eEI:\e
+	:mr=\eED:nd=\eE=:pb#9600:rp=0.2*\eEr%.%+ :se=\eEd\eEe:sf=^J:so=\eEE\eED:\e
+	:.ta=8\et:te=\eEv    \e200\e200\e200\e200\e200\e200\eEp\er\en:\e
+	:ti=\eEU\eEv  8p\eEp\er:ue=\eEg:ul:up=\eE;:us=\eEG:\e
+	:vb=\eEk\e200\e200\e200\e200\e200\e200\e200\e200\e200\e200\e200\e200\e200\e200\eEK:\e
+	:ve=\eEw:vs=\eEW:vt#8:xn:\e
+	:bs:cr=^M:dC#9:dT#8:nl=^J:ta=^I:pt:
+.Ed
+.Pp
+Entries may continue onto multiple lines by giving a \e as the last
+character of a line, and empty fields
+may be included for readability (here between the last field on a line
+and the first field on the next).
+Comments may be included on lines beginning with
+.Dq # .
+.Ss Types of Capabilities
+Capabilities in
+.Nm termcap
+are of three types: Boolean capabilities,
+which indicate particular features that the terminal has;
+numeric capabilities,
+giving the size of the display or the size of other attributes;
+and string capabilities,
+which give character sequences that can be used to perform particular
+terminal operations.
+All capabilities have two-letter codes.
+For instance, the fact that
+the Concept has
+.Em automatic margins
+(an automatic return and linefeed
+when the end of a line is reached) is indicated by the Boolean capability
+.Sy \&am .
+Hence the description of the Concept includes
+.Sy \&am .
+.Pp
+Boolean capabilities are defined by their name,
+.Sy \&fo .
+They have no argument. The presens of a boolean capability name sets its
+value to
+.Sy \&true .
+A capability value will be reverted to
+.Sy \&false ,
+by appending a
+.Sy \&@
+char after the name, such as
+.Sy \&fo@ .
+.Pp
+Numeric capabilities are followed by the character `#' then the value.
+In the example above
+.Sy \&co ,
+which indicates the number of columns the display has,
+gives the value `80' for the Concept.
+.Pp
+Finally, string-valued capabilities, such as
+.Sy \&ce
+(clear-to-end-of-line
+sequence) are given by the two-letter code, an `=', then a string
+ending at the next following `:'.
+A delay in milliseconds may appear after
+the `=' in such a capability,
+which causes padding characters to be supplied by
+.Xr tputs
+after the remainder of the string is sent to provide this delay.
+The delay can be either a number,
+such as `20', or a number followed by
+an `*',
+such as `3*'.
+An `*' indicates that the padding required is proportional
+to the number of lines affected by the operation, and the amount given is
+the per-affected-line padding required.
+(In the case of insert-character,
+the factor is still the number of
+.Em lines
+affected;
+this is always 1 unless the terminal has
+.Sy \&in
+and the software uses it.)
+When an `*' is specified, it is sometimes useful to give a delay of the form
+`3.5' to specify a delay per line to tenths of milliseconds.
+(Only one decimal place is allowed.)
+.Pp
+A number of escape sequences are provided in the string-valued capabilities
+for easy encoding of control characters there.
+.Sy \&\eE
+maps to an
+.Dv ESC
+character,
+.Sy \&^X
+maps to a control-X for any appropriate X,
+and the sequences
+.Sy \&\en
+.Sy \&\er
+.Sy \&\et
+.Sy \&\eb
+.Sy \&\ef
+map to linefeed, return, tab, backspace, and formfeed, respectively.
+Finally, characters may be given as three octal digits after a
+.Sy \&\e ,
+and the characters
+.Sy \&^
+and
+.Sy \&\e
+may be given as
+.Sy \&\e^
+and
+.Sy \&\e\e .
+If it is necessary to place a
+.Sy \&:
+in a capability it must be escaped in
+octal as
+.Sy \&\e072 .
+If it is necessary to place a
+.Dv NUL
+character in a string capability it
+must be encoded as
+.Sy \&\e200 .
+(The routines that deal with
+.Nm termcap
+use C strings and strip the high bits of the output very late, so that
+a
+.Sy \&\e200
+comes out as a
+.Sy \&\e000
+would.)
+.Pp
+Sometimes individual capabilities must be commented out.
+To do this, put a period before the capability name.
+For example, see the first
+.Sy \&cr
+and
+.Sy \&ta
+in the example above.
+.Ss Preparing Descriptions
+The most effective way to prepare a terminal description is by imitating
+the description of a similar terminal in
+.Nm termcap
+and to build up a description gradually, using partial descriptions
+with
+.Xr \&vi
+to check that they are correct.
+Be aware that a very unusual terminal may expose deficiencies in
+the ability of the
+.Nm termcap
+file to describe it
+or bugs in
+.Xr \&vi .
+To easily test a new terminal description you are working on
+you can put it in your home directory in a file called
+.Pa .termcap
+and programs will look there before looking in
+.Pa /usr/share/misc/termcap .
+You can also set the environment variable
+.Ev TERMPATH
+to a list of absolute file pathnames (separated by spaces or colons),
+one of which contains the description you are working on,
+and programs will search them in the order listed, and nowhere else.
+See
+.Xr termcap 3 .
+The
+.Ev TERMCAP
+environment variable is usually set to the
+.Nm termcap
+entry itself
+to avoid reading files when starting up a program.
+.Pp
+To get the padding for insert-line right
+(if the terminal manufacturer did not document it),
+a severe test is to use
+.Xr \&vi
+to edit
+.Pa /etc/passwd
+at 9600 baud, delete roughly 16 lines from the middle of the screen,
+then hit the `u' key several times quickly.
+If the display messes up, more padding is usually needed.
+A similar test can be used for insert-character.
+.Ss Basic Capabilities
+The number of columns on each line of the display is given by the
+.Sy \&co
+numeric capability.
+If the display is a
+.Tn CRT ,
+then the
+number of lines on the screen is given by the
+.Sy \&li
+capability.
+If the display wraps around to the beginning of the next line when
+the cursor reaches the right margin, then it should have the
+.Sy \&am
+capability.
+If the terminal can clear its screen,
+the code to do this is given by the
+.Sy \&cl
+string capability.
+If the terminal overstrikes
+(rather than clearing the position when a character is overwritten),
+it should have the
+.Sy \&os
+capability.
+If the terminal is a printing terminal,
+with no soft copy unit,
+give it both
+.Sy \&hc
+and
+.Sy \&os .
+.Pf ( Sy \&os
+applies to storage scope terminals,
+such as the Tektronix 4010 series,
+as well as to hard copy and
+.Tn APL
+terminals.)
+If there is a code to move the cursor to the left edge of the current row,
+give this as
+.Sy \&cr .
+(Normally this will be carriage-return,
+.Sy \&^M . )
+If there is a code to produce an audible signal (bell, beep,
+etc. ) ,
+give this as
+.Sy \&bl .
+.Pp
+If there is a code (such as backspace)
+to move the cursor one position to the left,
+that capability should be given as
+.Sy \&le .
+Similarly,
+codes to move to the right, up, and down
+should be given as
+.Sy \&nd ,
+.Sy \&up ,
+and
+.Sy \&do ,
+respectively.
+These
+.Em local cursor motions
+should not alter the text they pass over;
+for example, you would not normally use
+.Dq nd=\ \&
+unless the terminal has the
+.Sy \&os
+capability,
+because the space would erase the character moved over.
+.Pp
+A very important point here is that the local cursor motions encoded
+in
+.Nm termcap
+have undefined behavior at the left and top edges of a
+.Tn CRT
+display.
+Programs should never attempt to backspace around the left edge,
+unless
+.Sy \&bw
+is given, and never attempt to go up off the top
+using local cursor motions.
+.Pp
+In order to scroll text up,
+a program goes to the bottom left corner of the screen and sends the
+.Sy \&sf
+(index) string.
+To scroll text down,
+a program goes to the top left corner of the screen and sends the
+.Sy \&sr
+(reverse index) string.
+The strings
+.Sy \&sf
+and
+.Sy \&sr
+have undefined behavior
+when not on their respective corners of the screen.
+Parameterized versions of the scrolling sequences are
+.Sy \&SF
+and
+.Sy \&SR ,
+which have the same semantics as
+.Sy \&sf
+and
+.Sy \&sr
+except that they take one parameter
+and scroll that many lines.
+They also have undefined behavior
+except at the appropriate corner of the screen.
+.Pp
+The
+.Sy \&am
+capability tells whether the cursor sticks at the right
+edge of the screen when text is output there,
+but this does not necessarily apply to
+.Sy \&nd
+from the last column.
+Leftward local motion is defined from the left edge only when
+.Sy \&bw
+is given; then an
+.Sy \&le
+from the left edge will move to the right edge of the previous row.
+This is useful for drawing a box around the edge of the screen,
+for example.
+If the terminal has switch-selectable automatic margins,
+the
+.Nm termcap
+description usually assumes that this feature is on,
+.Em i.e . ,
+.Sy \&am .
+If the terminal has a command
+that moves to the first column of the next line,
+that command can be given as
+.Sy \&nw
+(newline).
+It is permissible for this to clear the remainder of the current line,
+so if the terminal has no correctly-working
+.Tn \&CR
+and
+.Tn \&LF
+it may still be possible to craft a working
+.Sy \&nw
+out of one or both of them.
+.Pp
+These capabilities suffice to describe hardcopy and
+.Dq glass-tty
+terminals.
+Thus the Teletype model 33 is described as
+.Bd -literal -offset indent
+T3\||\|tty33\||\|33\||\|tty\||\|Teletype model 33:\e
+	:bl=^G:co#72:cr=^M:do=^J:hc:os:
+.Ed
+.Pp
+and the Lear Siegler
+.Tn ADM Ns \-3
+is described as
+.Bd -literal -offset indent
+l3\||\|adm3\||\|3\||\|LSI \s-1ADM\s0-3:\e
+:am:bl=^G:cl=^Z:co#80:cr=^M:do=^J:le=^H:li#24:sf=^J:
+.Ed
+.Ss Parameterized Strings
+Cursor addressing and other strings requiring parameters
+are described by a
+parameterized string capability, with
+.Xr printf 3 Ns \-like
+escapes
+.Sy \&%x
+in it,
+while other characters are passed through unchanged.
+For example, to address the cursor the
+.Sy \&cm
+capability is given, using two parameters: the row and column to move to.
+(Rows and columns are numbered from zero and refer to the physical screen
+visible to the user, not to any unseen memory.
+If the terminal has memory-relative cursor addressing,
+that can be indicated by an analogous
+.Sy \&CM
+capability.)
+.Pp
+The
+.Sy \&%
+encodings have the following meanings:
+.Bl -column xxxxx
+.It "%%	output `%'"
+.It "%d	output value as in"
+.Xr printf
+%d
+.It "%2	output value as in"
+.Xr printf
+%2d
+.It "%3	output value as in"
+.Xr printf
+%3d
+.It "%.	output value as in"
+.Xr printf
+%c
+.It "%+" Ns Em x Ta No add
+.Em x
+to value, then do %.
+.It "%>" Ns Em \&xy Ta No if
+value >
+.Em x
+then add
+.Em y ,
+no output
+.It "%r	reverse order of two parameters, no output"
+.It "%i	increment by one, no output"
+.It "%n	exclusive-or all parameters with 0140 (Datamedia 2500)"
+.It "%B" Ta Tn BCD No "(16*(value/10)) + (value%10), no output"
+.It "%D	Reverse coding (value \- 2*(value%16)), no output (Delta Data)."
+.El
+.Pp
+Consider the Hewlett-Packard 2645, which, to get to row 3 and column 12, needs
+to be sent
+.Dq \eE&a12c03Y
+padded for 6 milliseconds.
+Note that the order
+of the row and column coordinates is reversed here
+and that the row and column
+are sent as two-digit integers.
+Thus its
+.Sy \&cm
+capability is
+.Dq Li cm=6\eE&%r%2c%2Y .
+.Pp
+The Datamedia 2500 needs the current row and column sent
+encoded in binary using
+.Dq \&%. .
+Terminals that use
+.Dq \&%.
+need to be able to
+backspace the cursor
+.Po Sy \&le Pc
+and to move the cursor up one line on the screen
+.Po Sy \&up Pc .
+This is necessary because it is not always safe to transmit
+.Sy \&\en ,
+.Sy \&^D ,
+and
+.Sy \&\er ,
+as the system may change or discard them.
+(Programs using
+.Nm termcap
+must set terminal modes so that tabs are not expanded, so
+.Sy \&\et
+is safe to send.
+This turns out to be essential for the Ann Arbor 4080.)
+.Pp
+A final example is the Lear Siegler
+.Tn ADM Ns \-3a,
+which offsets row and column
+by a blank character, thus
+.Dq Li cm=\eE=%+ %+\ \& .
+.Pp
+Row or column absolute cursor addressing
+can be given as single parameter capabilities
+.Sy \&ch
+(horizontal position absolute) and
+.Sy \&cv
+(vertical position absolute).
+Sometimes these are shorter than the more general two-parameter sequence
+(as with the Hewlett-Packard 2645) and can be used in preference to
+.Sy \&cm .
+If there are parameterized local motions
+.Pf ( Em e.g . ,
+move
+.Ar n
+positions to the right)
+these can be given as
+.Sy \&DO ,
+.Sy \&LE ,
+.Sy \&RI ,
+and
+.Sy \&UP
+with a single parameter indicating how many positions to move.
+These are primarily useful if the terminal does not have
+.Sy \&cm ,
+such as the Tektronix 4025.
+.Ss Cursor Motions
+.Pp
+If the terminal has a fast way to home the cursor
+(to the very upper left corner of the screen), this can be given as
+.Sy \&ho .
+Similarly, a fast way of getting to the lower left-hand corner
+can be given as
+.Sy \&ll ;
+this may involve going up with
+.Sy \&up
+from the home position,
+but a program should never do this itself (unless
+.Sy \&ll
+does), because it can
+make no assumption about the effect of moving up from the home position.
+Note that the home position is the same as
+cursor address (0,0): to the top left corner of the screen, not of memory.
+(Therefore, the
+.Dq \eEH
+sequence on Hewlett-Packard terminals
+cannot be used for
+.Sy \&ho . )
+.Ss Area Clears
+If the terminal can clear from the current position to the end of the
+line, leaving the cursor where it is, this should be given as
+.Sy \&ce .
+If the terminal can clear from the current position to the end of the
+display, this should be given as
+.Sy \&cd .
+.Sy \&cd
+must only be invoked from the first column of a line.
+(Therefore,
+it can be simulated by a request to delete a large number of lines,
+if a true
+.Sy \&cd
+is not available.)
+.Ss Insert/Delete Line
+If the terminal can open a new blank line
+before the line containing the cursor,
+this should be given as
+.Sy \&al ;
+this must be invoked only from the first
+position of a line.
+The cursor must then appear at the left of the newly blank line.
+If the terminal can delete the line that the cursor is on, this
+should be given as
+.Sy \&dl ;
+this must only be used from the first position on
+the line to be deleted.
+Versions of
+.Sy \&al
+and
+.Sy \&dl
+which take a single parameter
+and insert or delete that many lines
+can be given as
+.Sy \&AL
+and
+.Sy \&DL .
+If the terminal has a settable scrolling region
+(like the VT100),
+the command to set this can be described with the
+.Sy \&cs
+capability,
+which takes two parameters: the top and bottom lines of the scrolling region.
+The cursor position is, alas, undefined after using this command.
+It is possible to get the effect of insert or delete line
+using this command \(em the
+.Sy \&sc
+and
+.Sy \&rc
+(save and restore cursor) commands are also useful.
+Inserting lines at the top or bottom of the screen can also be done using
+.Sy \&sr
+or
+.Sy \&sf
+on many terminals without a true insert/delete line,
+and is often faster even on terminals with those features.
+.Pp
+If the terminal has the ability to define a window as part of memory
+which all commands affect, it should be given as the parameterized string
+.Sy \&wi .
+The four parameters are the starting and ending lines in memory
+and the starting and ending columns in memory, in that order.
+(This
+.Xr terminfo
+capability is described for completeness.
+It is unlikely that any
+.Nm termcap Ns \- using
+program will support it.)
+.Pp
+If the terminal can retain display memory above the screen, then the
+.Sy \&da
+capability should be given;
+if display memory can be retained
+below, then
+.Sy \&db
+should be given.
+These indicate
+that deleting a line or scrolling may bring non-blank lines up from below
+or that scrolling back with
+.Sy \&sr
+may bring down non-blank lines.
+.Ss Insert/Delete Character
+There are two basic kinds of intelligent terminals with respect to
+insert/delete character that can be described using
+.Nm termcap .
+The most common insert/delete character operations affect only the characters
+on the current line and shift characters off the end of the line rigidly.
+Other terminals, such as the Concept\-100 and the Perkin Elmer Owl, make
+a distinction between typed and untyped blanks on the screen, shifting
+upon an insert or delete only to an untyped blank on the screen which is
+either eliminated or expanded to two untyped blanks.
+You can determine
+the kind of terminal you have by clearing the screen then typing
+text separated by cursor motions.
+Type
+.Dq Li abc\ \ \ \ def
+using local
+cursor motions (not spaces) between the
+.Dq abc
+and the
+.Dq def .
+Then position the cursor before the
+.Dq abc
+and put the terminal in insert
+mode.
+If typing characters causes the rest of the line to shift
+rigidly and characters to fall off the end, then your terminal does
+not distinguish between blanks and untyped positions.
+If the
+.Dq abc
+shifts over to the
+.Dq def
+which then move together around the end of the
+current line and onto the next as you insert, then you have the second type of
+terminal and should give the capability
+.Sy \&in ,
+which stands for
+.Dq insert null .
+While these are two logically separate attributes
+(one line
+.Em \&vs .
+multi-line insert mode,
+and special treatment of untyped spaces),
+we have seen no terminals whose insert
+mode cannot be described with the single attribute.
+.Pp
+.Nm Termcap
+can describe both terminals that have an insert mode and terminals
+that send a simple sequence to open a blank position on the current line.
+Give as
+.Sy \&im
+the sequence to get into insert mode.
+Give as
+.Sy \&ei
+the sequence to leave insert mode.
+Now give as
+.Sy \&ic
+any sequence that needs to be sent just before
+each character to be inserted.
+Most terminals with a true insert mode
+will not give
+.Sy \&ic ;
+terminals that use a sequence to open a screen
+position should give it here.
+(If your terminal has both,
+insert mode is usually preferable to
+.Sy \&ic .
+Do not give both unless the terminal actually requires both to be used
+in combination.)
+If post-insert padding is needed, give this as a number of milliseconds
+in
+.Sy \&ip
+(a string option).
+Any other sequence that may need to be
+sent after insertion of a single character can also be given in
+.Sy \&ip .
+If your terminal needs to be placed into an `insert mode'
+and needs a special code preceding each inserted character,
+then both
+.Sy \&im Ns / Sy \&ei
+and
+.Sy \&ic
+can be given, and both will be used.
+The
+.Sy \&IC
+capability, with one parameter
+.Em n ,
+will repeat the effects of
+.Sy \&ic
+.Em n
+times.
+.Pp
+It is occasionally necessary to move around while in insert mode
+to delete characters on the same line
+.Pf ( Em e.g . ,
+if there is a tab after
+the insertion position).
+If your terminal allows motion while in
+insert mode, you can give the capability
+.Sy \&mi
+to speed up inserting
+in this case.
+Omitting
+.Sy \&mi
+will affect only speed.
+Some terminals
+(notably Datamedia's) must not have
+.Sy \&mi
+because of the way their
+insert mode works.
+.Pp
+Finally, you can specify
+.Sy \&dc
+to delete a single character,
+.Sy \&DC
+with one parameter
+.Em n
+to delete
+.Em n
+characters,
+and delete mode by giving
+.Sy \&dm
+and
+.Sy \&ed
+to enter and exit delete mode
+(which is any mode the terminal needs to be placed in for
+.Sy \&dc
+to work).
+.Ss Highlighting, Underlining, and Visible  Bells
+If your terminal has one or more kinds of display attributes,
+these can be represented in a number of different ways.
+You should choose one display form as
+.Em standout mode ,
+representing a good high-contrast, easy-on-the-eyes format
+for highlighting error messages and other attention getters.
+(If you have a choice, reverse video plus half-bright is good,
+or reverse video alone.)
+The sequences to enter and exit standout mode
+are given as
+.Sy \&so
+and
+.Sy \&se ,
+respectively.
+If the code to change into or out of standout
+mode leaves one or even two blank spaces or garbage characters on the screen,
+as the
+.Tn TVI
+912 and Teleray 1061 do,
+then
+.Sy \&sg
+should be given to tell how many characters are left.
+.Pp
+Codes to begin underlining and end underlining can be given as
+.Sy \&us
+and
+.Sy \&ue ,
+respectively.
+Underline mode change garbage is specified by
+.Sy \&ug ,
+similar to
+.Sy \&sg .
+If the terminal has a code to underline the current character and move
+the cursor one position to the right,
+such as the Microterm Mime,
+this can be given as
+.Sy \&uc .
+.Pp
+Other capabilities to enter various highlighting modes include
+.Sy \&mb
+(blinking),
+.Sy \&md
+(bold or extra bright),
+.Sy \&mh
+(dim or half-bright),
+.Sy \&mk
+(blanking or invisible text),
+.Sy \&mp
+(protected),
+.Sy \&mr
+(reverse video),
+.Sy \&me
+(turn off
+.Em all
+attribute modes),
+.Sy \&as
+(enter alternate character set mode), and
+.Sy \&ae
+(exit alternate character set mode).
+Turning on any of these modes singly may or may not turn off other modes.
+.Pp
+If there is a sequence to set arbitrary combinations of mode,
+this should be given as
+.Sy \&sa
+(set attributes), taking 9 parameters.
+Each parameter is either 0 or 1,
+as the corresponding attributes is on or off.
+The 9 parameters are, in order: standout, underline, reverse, blink,
+dim, bold, blank, protect, and alternate character set.
+Not all modes need be supported by
+.Sy \&sa ,
+only those for which corresponding attribute commands exist.
+(It is unlikely that a
+.Nm termcap Ns \-using
+program will support this capability, which is defined for compatibility
+with
+.Xr terminfo . )
+.Pp
+Terminals with the
+.Dq magic cookie
+glitches
+.Pf ( Sy \&sg
+and
+.Sy \&ug ) ,
+rather than maintaining extra attribute bits for each character cell,
+instead deposit special
+.Dq cookies ,
+or
+.Dq garbage characters ,,
+when they receive mode-setting sequences,
+which affect the display algorithm.
+.Pp
+Some terminals,
+such as the Hewlett-Packard 2621,
+automatically leave standout
+mode when they move to a new line or when the cursor is addressed.
+Programs using standout mode
+should exit standout mode on such terminals
+before moving the cursor or sending a newline.
+On terminals where this is not a problem,
+the
+.Sy \&ms
+capability should be present
+to say that this overhead is unnecessary.
+.Pp
+If the terminal has
+a way of flashing the screen to indicate an error quietly
+(a bell replacement),
+this can be given as
+.Sy \&vb ;
+it must not move the cursor.
+.Pp
+If the cursor needs to be made more visible than normal
+when it is not on the bottom line
+(to change, for example, a non-blinking underline into an easier-to-find
+block or blinking underline),
+give this sequence as
+.Sy \&vs .
+If there is a way to make the cursor completely invisible, give that as
+.Sy \&vi .
+The capability
+.Sy \&ve ,
+which undoes the effects of both of these modes,
+should also be given.
+.Pp
+If your terminal correctly displays underlined characters
+(with no special codes needed)
+even though it does not overstrike,
+then you should give the capability
+.Sy \&ul .
+If overstrikes are erasable with a blank,
+this should be indicated by giving
+.Sy \&eo .
+.Ss Keypad
+If the terminal has a keypad that transmits codes when the keys are pressed,
+this information can be given.
+Note that it is not possible to handle
+terminals where the keypad only works in local mode
+(this applies, for example, to the unshifted Hewlett-Packard 2621 keys).
+If the keypad can be set to transmit or not transmit,
+give these codes as
+.Sy \&ks
+and
+.Sy \&ke .
+Otherwise the keypad is assumed to always transmit.
+The codes sent by the left-arrow, right-arrow, up-arrow, down-arrow,
+and home keys can be given as
+.Sy \&kl ,
+.Sy \&kr ,
+.Sy \&ku ,
+.Sy \&kd ,
+and
+.Sy \&kh ,
+respectively.
+If there are function keys such as f0, f1, ..., f9, the codes they send
+can be given as
+.Sy \&k0 ,
+.Sy \&k1 ,
+...,
+.Sy \&k9 .
+If these keys have labels other than the default f0 through f9, the labels
+can be given as
+.Sy \&l0 ,
+.Sy \&l1 ,
+...,
+.Sy \&l9 .
+The codes transmitted by certain other special keys can be given:
+.Sy \&kH
+(home down),
+.Sy \&kb
+(backspace),
+.Sy \&ka
+(clear all tabs),
+.Sy \&kt
+(clear the tab stop in this column),
+.Sy \&kC
+(clear screen or erase),
+.Sy \&kD
+(delete character),
+.Sy \&kL
+(delete line),
+.Sy \&kM
+(exit insert mode),
+.Sy \&kE
+(clear to end of line),
+.Sy \&kS
+(clear to end of screen),
+.Sy \&kI
+(insert character or enter insert mode),
+.Sy \&kA
+(insert line),
+.Sy \&kN
+(next page),
+.Sy \&kP
+(previous page),
+.Sy \&kF
+(scroll forward/down),
+.Sy \&kR
+(scroll backward/up), and
+.Sy \&kT
+(set a tab stop in this column).
+In addition, if the keypad has a 3 by 3 array of keys
+including the four arrow keys, then the other five keys can be given as
+.Sy \&K1 ,
+.Sy \&K2 ,
+.Sy \&K3 ,
+.Sy \&K4 ,
+and
+.Sy \&K5 .
+These keys are useful when the effects of a 3 by 3 directional pad are needed.
+The obsolete
+.Sy \&ko
+capability formerly used to describe
+.Dq other
+function keys has been
+completely supplanted by the above capabilities.
+.Pp
+The
+.Sy \&ma
+entry is also used to indicate arrow keys on terminals that have
+single-character arrow keys.
+It is obsolete but still in use in
+version 2 of
+.Sy \&vi
+which must be run on some minicomputers due to
+memory limitations.
+This field is redundant with
+.Sy \&kl ,
+.Sy \&kr ,
+.Sy \&ku ,
+.Sy \&kd ,
+and
+.Sy \&kh .
+It consists of groups of two characters.
+In each group, the first character is what an arrow key sends, and the
+second character is the corresponding
+.Sy \&vi
+command.
+These commands are
+.Ar h
+for
+.Sy \&kl ,
+.Ar j
+for
+.Sy \&kd ,
+.Ar k
+for
+.Sy \&ku ,
+.Ar l
+for
+.Sy \&kr ,
+and
+.Ar H
+for
+.Sy \&kh .
+For example, the Mime would have
+.Dq Li ma=^Hh^Kj^Zk^Xl
+indicating arrow keys left (^H), down (^K), up (^Z), and right (^X).
+(There is no home key on the Mime.)
+.Ss Tabs and Initialization
+If the terminal needs to be in a special mode when running
+a program that uses these capabilities,
+the codes to enter and exit this mode can be given as
+.Sy \&ti
+and
+.Sy \&te .
+This arises, for example, from terminals like the Concept with more than
+one page of memory.
+If the terminal has only memory-relative cursor addressing and not
+screen-relative cursor addressing,
+a screen-sized window must be fixed into
+the display for cursor addressing to work properly.
+This is also used for the Tektronix 4025, where
+.Sy \&ti
+sets the command character to be the one used by
+.Nm termcap .
+.Pp
+Other capabilities
+include
+.Sy \&is ,
+an initialization string for the terminal,
+and
+.Sy \&if ,
+the name of a file containing long initialization strings.
+These strings are expected to set the terminal into modes
+consistent with the rest of the
+.Nm termcap
+description.
+They are normally sent to the terminal by the
+.Xr tset
+program each time the user logs in.
+They will be printed in the following order:
+.Sy \&is ;
+setting tabs using
+.Sy \&ct
+and
+.Sy \&st ;
+and finally
+.Sy \&if .
+.Pf ( Xr Terminfo
+uses
+.Sy \&i\&1-i2
+instead of
+.Sy \&is
+and runs the program
+.Sy \&iP
+and prints
+.Sy "\&i\&3"
+after the other initializations.)
+A pair of sequences that does a harder reset from a totally unknown state
+can be analogously given as
+.Sy \&rs
+and
+.Sy \&if .
+These strings are output by the
+.Xr reset
+program, which is used when the terminal gets into a wedged state.
+.Pf ( Xr Terminfo
+uses
+.Sy "\&r1-r3"
+instead of
+.Sy \&rs . )
+Commands are normally placed in
+.Sy \&rs
+and
+.Sy \&rf
+only if they produce annoying effects on the screen and are not necessary
+when logging in.
+For example, the command to set the VT100 into 80-column mode
+would normally be part of
+.Sy \&is ,
+but it causes an annoying glitch of the screen and is not normally needed
+since the terminal is usually already in 80-column mode.
+.Pp
+If the terminal has hardware tabs,
+the command to advance to the next tab stop can be given as
+.Sy \&ta
+(usually
+.Sy \&^I ) .
+A
+.Dq backtab
+command which moves leftward to the previous tab stop
+can be given as
+.Sy \&bt .
+By convention,
+if the terminal driver modes indicate that tab stops are being expanded
+by the computer rather than being sent to the terminal,
+programs should not use
+.Sy \&ta
+or
+.Sy \&bt
+even if they are present,
+since the user may not have the tab stops properly set.
+If the terminal has hardware tabs that are initially set every
+.Ar n
+positions when the terminal is powered up, then the numeric parameter
+.Sy \&it
+is given, showing the number of positions between tab stops.
+This is normally used by the
+.Xr tset
+command to determine whether to set the driver mode for hardware tab
+expansion, and whether to set the tab stops.
+If the terminal has tab stops that can be saved in nonvolatile memory, the
+.Nm termcap
+description can assume that they are properly set.
+.Pp
+If there are commands to set and clear tab stops, they can be given as
+.Sy \&ct
+(clear all tab stops) and
+.Sy \&st
+(set a tab stop in the current column of every row).
+If a more complex sequence is needed to set the tabs than can be
+described by this, the sequence can be placed in
+.Sy \&is
+or
+.Sy \&if .
+.Ss Delays
+Certain capabilities control padding in the terminal driver.
+These are primarily needed by hardcopy terminals and are used by the
+.Xr tset
+program to set terminal driver modes appropriately.
+Delays embedded in the capabilities
+.Sy \&cr ,
+.Sy \&sf ,
+.Sy \&le ,
+.Sy \&ff ,
+and
+.Sy \&ta
+will cause the appropriate delay bits to be set in the terminal driver.
+If
+.Sy \&pb
+(padding baud rate) is given, these values can be ignored at baud rates
+below the value of
+.Sy \&pb .
+For
+.Bx 4.2
+.Xr tset ,
+the delays are given as numeric capabilities
+.Sy \&dC ,
+.Sy \&dN ,
+.Sy \&dB ,
+.Sy \&dF ,
+and
+.Sy \&dT
+instead.
+.Ss Miscellaneous
+If the terminal requires other than a
+.Dv NUL
+(zero) character as a pad,
+this can be given as
+.Sy \&pc .
+Only the first character of the
+.Sy \&pc
+string is used.
+.Pp
+If the terminal has commands to save and restore the position of the
+cursor, give them as
+.Sy \&sc
+and
+.Sy \&rc .
+.Pp
+If the terminal has an extra
+.Dq status line
+that is not normally used by
+software, this fact can be indicated.
+If the status line is viewed as an extra line below the bottom line,
+then the capability
+.Sy \&hs
+should be given.
+Special strings to go to a position in the status line and to return
+from the status line can be given as
+.Sy \&ts
+and
+.Sy \&fs .
+.Pf ( Xr \&fs
+must leave the cursor position in the same place that it was before
+.Sy \&ts .
+If necessary, the
+.Sy \&sc
+and
+.Sy \&rc
+strings can be included in
+.Sy \&ts
+and
+.Sy \&fs
+to get this effect.)
+The capability
+.Sy \&ts
+takes one parameter, which is the column number of the status line
+to which the cursor is to be moved.
+If escape sequences and other special commands such as tab work while in
+the status line, the flag
+.Sy \&es
+can be given.
+A string that turns off the status line (or otherwise erases its contents)
+should be given as
+.Sy \&ds .
+The status line is normally assumed to be the same width as the
+rest of the screen,
+.Em i.e . ,
+.Sy \&co .
+If the status line is a different width (possibly because the terminal
+does not allow an entire line to be loaded), then its width in columns
+can be indicated with the numeric parameter
+.Sy \&ws .
+.Pp
+If the terminal can move up or down half a line, this can be
+indicated with
+.Sy \&hu
+(half-line up) and
+.Sy \&hd
+(half-line down).
+This is primarily useful for superscripts and subscripts on hardcopy
+terminals.
+If a hardcopy terminal can eject to the next page (form feed),
+give this as
+.Sy \&ff
+(usually
+.Sy \&^L ) .
+.Pp
+If there is a command to repeat a given character a given number of times
+(to save time transmitting a large number of identical characters),
+this can be indicated with the parameterized string
+.Sy \&rp .
+The first parameter is the character to be repeated and the second is
+the number of times to repeat it.
+(This is a
+.Xr terminfo
+feature that is unlikely to be supported by a program that uses
+.Nm termcap . )
+.Pp
+If the terminal has a settable command character, such as the
+Tektronix 4025, this can be indicated with
+.Sy \&CC .
+A prototype command character is chosen which is used in all capabilities.
+This character is given in the
+.Sy \&CC
+capability to identify it.
+The following convention is supported on some
+.Ux
+systems:
+The environment is to be searched for a
+.Ev \&CC
+variable,
+and if found,
+all occurrences of the prototype character are replaced by the character
+in the environment variable.
+This use of the
+.Ev \&CC
+environment variable
+is a very bad idea, as it conflicts with
+.Xr make 1 .
+.Pp
+Terminal descriptions that do not represent a specific kind of known
+terminal, such as
+.Em switch ,
+.Em dialup ,
+.Em patch ,
+and
+.Xr network ,
+should include the
+.Sy \&gn
+(generic) capability so that programs can complain that they do not know
+how to talk to the terminal.
+(This capability does not apply to
+.Em virtual
+terminal descriptions for which the escape sequences are known.)
+.Pp
+If the terminal uses xoff/xon
+.Pq Tn DC3 Ns / Ns Tn DC1
+handshaking for flow control, give
+.Sy \&xo .
+Padding information should still be included so that routines can make
+better decisions about costs, but actual pad characters will not be
+transmitted.
+.Pp
+If the terminal has a
+.Dq meta key
+which acts as a shift key, setting the
+8th bit of any character transmitted, then this fact can be indicated with
+.Sy \&km .
+Otherwise, software will assume that the 8th bit is parity and it will
+usually be cleared.
+If strings exist to turn this
+.Dq meta mode
+on and off, they can be given as
+.Sy \&mm
+and
+.Sy \&mo .
+.Pp
+If the terminal has more lines of memory than will fit on the screen at once,
+the number of lines of memory can be indicated with
+.Sy \&lm .
+An explicit value of 0 indicates that the number of lines is not fixed,
+but that there is still more memory than fits on the screen.
+.Pp
+If the terminal is one of those supported by the
+.Ux
+system virtual
+terminal protocol, the terminal number can be given as
+.Sy \&vt .
+.Pp
+Media copy strings which control an auxiliary printer
+connected to the terminal can be given as
+.Sy \&ps :
+print the contents of the screen;
+.Sy \&pf :
+turn off the printer; and
+.Sy \&po :
+turn on the printer.
+When the printer is on, all text sent to the terminal will be sent to the
+printer.
+It is undefined whether the text is also displayed on the terminal screen
+when the printer is on.
+A variation
+.Sy \&pO
+takes one parameter and leaves the printer on for as many characters as the
+value of the parameter, then turns the printer off.
+The parameter should not exceed 255.
+All text, including
+.Sy \&pf ,
+is transparently passed to the printer while
+.Sy \&pO
+is in effect.
+.Pp
+Strings to program function keys can be given as
+.Sy \&pk ,
+.Sy \&pl ,
+and
+.Sy \&px .
+Each of these strings takes two parameters: the function key number
+to program (from 0 to 9) and the string to program it with.
+Function key numbers out of this range may program undefined keys
+in a terminal-dependent manner.
+The differences among the capabilities are that
+.Sy \&pk
+causes pressing the given key to be the same as the user typing the given
+string;
+.Sy \&pl
+causes the string to be executed by the terminal in local mode;
+and
+.Sy \&px
+causes the string to be transmitted to the computer.
+Unfortunately, due to lack of a definition for string parameters in
+.Nm termcap ,
+only
+.Xr terminfo
+supports these capabilities.
+.Ss Glitches and Braindamage
+Hazeltine terminals, which do not allow `~' characters to be displayed,
+should indicate
+.Sy \&hz .
+.Pp
+The
+.Sy \&nc
+capability, now obsolete, formerly indicated Datamedia terminals,
+which echo
+.Sy \&\er \en
+for
+carriage return then ignore a following linefeed.
+.Pp
+Terminals that ignore a linefeed immediately after an
+.Sy \&am
+wrap, such as the Concept, should indicate
+.Sy \&xn .
+.Pp
+If
+.Sy \&ce
+is required to get rid of standout
+(instead of merely writing normal text on top of it),
+.Sy \&xs
+should be given.
+.Pp
+Teleray terminals, where tabs turn all characters moved over to blanks,
+should indicate
+.Sy \&xt
+(destructive tabs).
+This glitch is also taken to mean that it is not possible
+to position the cursor on top of a \*(lqmagic cookie\*(rq, and that
+to erase standout mode it is necessary to use delete and insert line.
+.Pp
+The Beehive Superbee, which is unable to correctly transmit the
+.Dv ESC
+or
+.Sy \&^C
+characters, has
+.Sy \&xb ,
+indicating that the
+.Dq \&f\&1
+key is used for
+.Dv ESC
+and
+.Dq \&f\&2
+for ^C.
+(Only certain Superbees have this problem, depending on the
+.Tn ROM . )
+.Pp
+Other specific terminal problems may be corrected by adding more
+capabilities of the form
+.Sy x Em x .
+.Ss Similar Terminals
+If there are two very similar terminals,
+one can be defined as being just like the other with certain exceptions.
+The string capability
+.Sy \&tc
+can be given
+with the name of the similar terminal.
+This capability must be
+.Em last ,
+and the combined length of the entries
+must not exceed 1024.
+The capabilities given before
+.Sy \&tc
+override those in the terminal type invoked by
+.Sy \&tc .
+A capability can be canceled by placing
+.Sy \&xx@
+to the left of the
+.Sy \&tc
+invocation, where
+.Sy \&xx
+is the capability.
+For example, the entry
+.Bd -literal -offset indent
+hn\||\|2621\-nl:ks@:ke@:tc=2621:
+.Ed
+.Pp
+defines a
+.Dq 2621\-nl
+that does not have the
+.Sy \&ks
+or
+.Sy \&ke
+capabilities,
+hence does not turn on the function key labels when in visual mode.
+This is useful for different modes for a terminal, or for different
+user preferences.
+.Sh FILES
+.Bl -tag -width /usr/share/misc/termcap.db -compact
+.It Pa /usr/share/misc/termcap
+File containing terminal descriptions.
+.It Pa /usr/share/misc/termcap.db
+Hash database file containing terminal descriptions (see 
+.Xr cap_mkdb 1 ) .
+.El
+.Sh SEE ALSO
+.Xr \&ex 1 ,
+.Xr cap_mkdb 1 ,
+.Xr more 1 ,
+.Xr tset 1 ,
+.Xr \&ul 1 ,
+.Xr vi 1 ,
+.Xr curses 3 ,
+.Xr printf 3 ,
+.Xr termcap 3 ,
+.Xr term 7
+.Sh CAVEATS AND BUGS
+The
+.Em Note :
+.Nm termcap
+functions
+were replaced by
+.Xr terminfo
+in
+.At V
+Release 2.0.
+The transition will be relatively painless if capabilities flagged as
+.Dq obsolete
+are avoided.
+.Pp
+Lines and columns are now stored by the kernel as well as in the termcap
+entry.
+Most programs now use the kernel information primarily; the information
+in this file is used only if the kernel does not have any information.
+.Pp
+.Xr \&Vi
+allows only 256 characters for string capabilities, and the routines
+in
+.Xr termcap 3
+do not check for overflow of this buffer.
+The total length of a single entry (excluding only escaped newlines)
+may not exceed 1024.
+.Pp
+Not all programs support all entries.
+.Sh HISTORY
+The
+.Nm
+file format appeared in
+.Bx 3 .
diff --git a/share/termtypes/termtypes.master b/share/termtypes/termtypes.master
new file mode 100644
index 00000000000..aa356f25a27
--- /dev/null
+++ b/share/termtypes/termtypes.master
@@ -0,0 +1,16630 @@
+######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
+#
+#	Version 10.2.5
+#	$Date: 1998/12/07 18:23:36 $
+#	master syntax
+#
+#	Eric S. Raymond		(current maintainer)
+#	John Kunze, Berkeley
+#	Craig Leres, Berkeley
+#
+# Please e-mail changes to terminfo@ccil.org; the old termcap@berkeley.edu
+# address is no longer valid.  The latest version can always be found at
+# <http://earthspace.net/terminfo>.
+#
+# PURPOSE OF THIS FILE:
+#
+# This file describes the capabilities of various character-cell terminals,
+# as needed by software such as screen-oriented editors.
+#
+# Other terminfo and termcap files exist, supported by various OS vendors
+# or as relics of various older versions of UNIX.  This one is the longest
+# and most comprehensive one in existence.  It subsumes not only the entirety
+# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
+# termcap file, but also large numbers of vendor-maintained termcap and
+# terminfo entries more complete and carefully tested than those in historical
+# termcap/terminfo versions.
+#
+# Pointers to related resources (including the ncurses distribution) may
+# be found at <http://earthspace.net/terminfo>.
+#
+# INTERNATIONALIZATION:
+#
+# This file uses only the US-ASCII character set (no ISO8859 characters).
+#
+# This file assumes a US-ASCII character set. If you need to fix this, start
+# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
+# for your character set.  \E(A and \E)A enables the British character set
+# with the pound sign at position 2/3.  
+#
+# In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
+# C1 characters are considered the first-byte set of the Japanese encodings,
+# so \E)0 should be avoided in <enacs> and initialization strings.
+#
+# FILE FORMAT:
+#
+# The version you are looking at may be in any of three formats: master
+# (terminfo with OT capabilities), stock terminfo, or termcap.  You can tell
+# which by the format given in the header above.
+#
+# The master format is accepted and generated by the terminfo tools in the
+# ncurses suite; it differs from stock (System V-compatible) terminfo only
+# in that it admits a group of capabilities (prefixed `OT') equivalent to
+# various obsolete termcap capabilities.  You can, thus, convert from master
+# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
+# you have ncurses `tic -I' is nicer (among other things, it automatically
+# outputs entries in a canonical form).
+#
+# The termcap version is generated automatically from the master version
+# using tic -C.  This filtering leaves in the OT capabilities under their
+# original termcap names.  All translated entries fit within the 1023-byte
+# string-table limit of archaic termcap libraries except where explicitly
+# noted below.  Note that the termcap translation assumes that your termcap
+# library can handle multiple tc capabilities in an entry. 4.4BSD has this
+# capability.  Older versions of GNU termcap, through 1.3, do not. 
+#
+# For details on these formats, see terminfo(5) in the ncurses distribution,
+# and termcap(5) in the 4.4BSD Unix Programmer's Manual.  Be aware that 4.4BSD
+# curses has been declared obsolete by the caretakers of the 4.4BSD sources
+# as of June 1995; they are encouraging everyone to migrate to ncurses.
+#
+# Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
+# no entry in this file has embedded comments.  This is so source translation
+# to termcap only has to carry over leading comments.  Also, no name field
+# contains embedded whitespace (such whitespace confuses rdist).
+#
+# Further note: older versions of this file were often installed with an editor
+# script (reorder) that moved the most common terminal types to the front of
+# the file.  This should no longer be necessary, as the file is now ordered
+# roughly by type frequency with ANSI/VT100 and other common types up front.
+#
+# Some information has been merged in from terminfo files distributed by
+# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below).  Much information
+# comes from vendors who maintain official terminfos for their hardware
+# (notably DEC and Wyse).
+#
+# A detailed change history is included at the end of this file.
+#
+# FILE ORGANIZATION:
+#
+# Comments in this file begin with # - they cannot appear in the middle
+# of a terminfo/termcap entry (this feature had to be sacrificed in order
+# to allow standard terminfo and termcap syntax to be generated cleanly from
+# the master format).  Individual capabilities are commented out by
+# placing a period between the colon and the capability name.
+#
+# The file is divided up into major sections (headed by lines beginning with 
+# the string "########") and minor sections (beginning with "####"); do
+#
+#	grep "^####" <file> | more
+#
+# to see a listing of section headings.  The intent of the divisions is
+# (a) to make it easier to find things, and (b) to order the database so
+# that important and frequently-encountered terminal types are near the
+# front (so that you'll get reasonable search efficiency from a linear
+# search of the termcap form even if you don't use reorder).  Minor sections
+# usually correspond to manufacturers or standard terminal classes. 
+# Parenthesized words following manufacturer names are type prefixes or
+# product line names used by that manufacturers.
+#
+# HOW TO READ THE ENTRIES:
+#
+# The first name in an entry is the canonical name for the model or
+# type, last entry is a verbose description.  Others are mnemonic synonyms for
+# the terminal.
+#
+# Terminal names look like <manufacturer> <model> - <modes/options>
+# The part to the left of the dash, if a dash is present, describes the
+# particular hardware of the terminal.  The part to the right may be used
+# for flags indicating special ROMs, extra memory, particular terminal modes,
+# or user preferences.
+#
+# All names should be in lower case, for consistency in typing.
+#
+# The following are conventionally used suffixes:
+#	-2p	Has two pages of memory.  Likewise 4p, 8p, etc.
+#	-am	Enable auto-margin.
+#	-m	Monochrome.  Suppress color support
+#	-mc	Magic-cookie.  Some terminals (notably older Wyses) can
+#		only support one attribute without magic-cookie lossage.
+#		Their base entry is usually paired with another that
+#		uses magic cookies to support multiple attributes.
+#	-nam	No auto-margin - suppress <am> capability
+#	-nl	No labels - suppress soft labels
+#	-ns	No status line - suppress status line
+#	-rv	Terminal in reverse video mode (black on white)
+#	-s	Enable status line.
+#	-vb	Use visible bell (<flash>) rather than <bel>.
+#	-w	Wide - in 132 column mode.
+# If a name has multiple suffixes and one is a line height, that one should 
+# go first.  Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.  
+# 
+# Entries with embedded plus signs are designed to be included through use/tc
+# capabilities, not used as standalone entries. 
+#
+# To avoid search clashes, some older all-numeric names for terminals have
+# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
+# All primary names of terminals now have alphanumeric prefixes.
+#
+# Comments marked "esr" are mostly results of applying the termcap-compiler
+# code packaged with ncurses and contemplating the resulting error messages. 
+# In many cases, these indicated obvious fixes to syntax garbled by the
+# composers.  In a few cases, I was able to deduce corrected forms for garbled
+# capabilities by looking at context.  All the information in the original
+# entries is preserved in the comments.
+#
+# In the comments, terminfo capability names are bracketed with <> (angle
+# brackets).  Termcap capability names are bracketed with :: (colons).
+#
+# INTERPRETATION OF USER CAPABILITIES
+#
+# The System V Release 4 and XPG4 terminfo format defines ten string
+# capabilities for use by applications, <u0>...<u9>.   In this file, we use
+# certain of these capabilities to describe functions which are not covered
+# by terminfo.  The mapping is as follows:
+#
+#	u9	terminal enquire string (equiv. to ANSI/ECMA-48 DA)
+#	u8	terminal answerback description
+#	u7	cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
+#	u6	cursor position report (equiv. to ANSI/ECMA-48 CPR)
+#
+# The terminal enquire string <u9> should elicit an answerback response
+# from the terminal.  Common values for <u9> will be ^E (on older ASCII
+# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
+#
+# The cursor position request (<u7>) string should elicit a cursor position
+# report.  A typical value (for VT100 terminals) is \E[6n.
+#
+# The terminal answerback description (u8) must consist of an expected
+# answerback string.  The string may contain the following scanf(3)-like
+# escapes:
+#
+#	%c	Accept any character
+#	%[...]	Accept any number of characters in the given set
+#
+# The cursor position report (<u6>) string must contain two scanf(3)-style 
+# %d format elements.  The first of these must correspond to the Y coordinate
+# and the second to the %d.  If the string contains the sequence %i, it is
+# taken as an instruction to decrement each value after reading it (this is
+# the inverse sense from the cup string).  The typical CPR value is
+# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
+#
+# These capabilities are used by tac(1m), the terminfo action checker soon
+# to be distributed with ncurses.
+#
+# TABSET FILES
+#
+# All the entries in this file have been edited to assume that the tabset
+# files directory is /usr/share/tabset, in conformance with the File Hierarchy
+# Standard for Linux and open-source BSD systems.  Some vendors (notably Sun)
+# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.  
+#
+# No curses package we know of actually uses these files.  If their location
+# is an issue, you will have to hand-patch the file locations before compiling
+# this file.
+# 
+# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
+#
+# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
+# character-cell terminals are increasingly replaced by X displays, much of
+# this file is becoming a historical document (this is part of the reason for
+# the new organization, which puts ANSI types, xterm, free-Unix consoles,
+# and vt100 up front in confidence that this will catch 95% of new hardware).
+#
+# For the terminal types still alive, I'd like to have manufacturer's
+# contact data (Internet address and/or snail-mail + phone).
+#
+# I'm also interested in enriching the comments so that the latter portions of
+# the file do in fact become a potted history of VDT technology as seen by
+# UNIX hackers.  Ideally, I'd like the headers for each manufacturer to
+# include its live/dead/out-of-the-business status, and for as many
+# terminal types as possible to be tagged with information like years
+# of heaviest use, popularity, and interesting features.
+#
+# I'm especially interested in identifying the obscure entries listed under
+# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
+# wisdom about them gets lost.  If you know a lot about obscure old terminals,
+# please go to the terminfo resource page, grab the UFO file (ufo.ti), and 
+# eyeball it for things you can identify and describe. 
+#
+# If you have been around long enough to contribute, please read the file
+# with this in mind and send me your annotations.
+#
+# COPYRIGHTS AND OTHER DELUSIONS
+#
+# The BSD ancestor of this file had a standard Regents of the University of
+# California copyright with dates from 1980 to 1993.
+#
+# Some information has been merged in from a terminfo file SCO distributes.
+# It has an obnoxious boilerplate copyright which I'm ignoring because they 
+# took so much of the content from the ancestral BSD versions of this file
+# and didn't attribute it, thereby violating the BSD Regents' copyright.
+#
+# Not that anyone should care.  However many valid functions copyrights may
+# serve, putting one on a termcap/terminfo file with hundreds of anonymous
+# contributors makes about as much sense as copyrighting a wall-full of
+# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
+#
+# This file deliberately has no copyright.  It belongs to no one and everyone.
+# If you claim you own it, you will merely succeed in looking like a fool. 
+# Use it as you like.  Use it at your own risk.  Copy and redistribute freely.
+# There are no guarantees anywhere.  Svaha!
+#
+
+######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
+#
+# This section describes terminal classes and brands that are still
+# quite common.
+#
+
+#### Specials
+#
+# Special "terminals".  These are used to label tty lines when you don't
+# know what kind of terminal is on it.  The characteristics of an unknown
+# terminal are the lowest common denominator - they look about like a ti 700.
+#
+
+dumb|80-column dumb tty,
+	am,
+	cols#80, 
+	bel=^G, cr=^M, cud1=^J, ind=^J,
+unknown|unknown terminal type,
+	gn, use=dumb,
+lpr|printer|line printer, 
+	hc, os, OTbs,
+	cols#132, lines#66,
+	bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
+glasstty|classic glass tty interpreting ASCII control characters,
+	am, 
+	cols#80, 
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, 
+	kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 
+
+#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
+#
+# See the end-of-file comment for more on these.
+#
+
+# The IBM PC alternate character set.  Plug this into any Intel console entry.
+# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
+# ROM graphics for control characters such as the diamond, up- and down-arrow.
+# This works with the System V, Linux, and BSDI consoles.  It's a safe bet this
+# will work with any Intel console, they all seem to have inherited \E[11m
+# from the ANSI.SYS de-facto standard.
+klone+acs|alternate character set for ansi.sys displays,
+	acsc=`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~q\304r\362s_t\303u\264v\301w\302x\263y\371z\372{\373|\374}\375~\376.\031-\030\054\021+^P0\333p\304r\304y\363z\362{\343|\330}\234,
+	rmacs=\E[10m, smacs=\E[11m, 
+
+# Highlight controls corresponding to the ANSI.SYS standard.  Most 
+# console drivers for Intel boxes obey these.  Makes the same assumption
+# about \E[11m as klone+acs.  True ANSI/ECMA-48 would have <rmso=\E[27m>,
+# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
+klone+sgr|attribute control for ansi.sys displays,
+	blink=\E[5m, bold=\E[1m, invis=\E[8m, 
+	rev=\E[7m, rmpch=\E[10m, rmso=\E[m, rmul=\E[m,
+	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 
+	sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
+	use=klone+acs,
+
+# Highlight controls corresponding to the ANSI.SYS standard.  *All*
+# console drivers for Intel boxes obey these.  Does not assume \E[11m will
+# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
+# diamond and arrow characters under curses.
+klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
+	blink=\E[5m, bold=\E[1m, invis=\E[8m, 
+	rev=\E[7m, rmso=\E[m, rmul=\E[m,
+	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 
+	sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
+	use=klone+acs,
+
+# KOI8-R (RFC1489) acs (alternate character set)
+# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
+klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
+	acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225, 
+	rmacs=\E[10m, smacs=\E[11m, 
+
+# ANSI.SYS color control.  The setab/setaf caps depend on the coincidence
+# between SVr4/XPG4's color numbers and ANSI.SYS attributes.  Here are longer
+# but equivalent strings that don't rely on that coincidence:
+# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
+# They match a subset of ECMA-48.
+klone+color|color control for ansi.sys and ISO6429-compatible displays,
+	colors#8, ncv#3, pairs#64,
+	op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 
+
+# This is better than klone+color, it doesn't assume white-on-black as the
+# default color pair,  but many `ANSI' terminals don't grok the <op> cap.
+ecma+color|color control for ECMA-48-compatible terminals,
+	colors#8, ncv#3, pairs#64,
+	op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 
+
+# Attribute control for ECMA-48-compatible terminals
+ecma+sgr|attribute capabilities for true ECMA-48 terminals,
+	rmso=\E[27m, rmul=\E[24m,
+	use=klone+sgr,	
+
+# For comparison, here are all the capabilities implied by the Intel
+# Binary Compatibility Standard (level 2) that fit within terminfo.
+# For more detail on this rather pathetic standard, see the comments
+# near the end of this file.
+ibcs2|Intel Binary Compatibility Standard prescriptions,
+	cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, dch=\E[%p1%dP, dispc=\E=%p1%dg,
+	ech=\E[%p1%dX, hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 
+	indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7, 
+	smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
+
+#### ANSI/ECMA-48 terminals and terminal emulators
+#
+# See near the end of this file for details on ANSI conformance.
+# Don't mess with these entries!  Lots of other entries depend on them!
+#
+# This section lists entries in a least-capable to most-capable order.
+# if you're in doubt about what `ANSI' matches yours, try them in that
+# order and back off from the first that breaks.
+
+ansi-mini|any ansi terminal with pessimistic assumptions, 
+	OTbs, am, 
+	cols#80, it#8, lines#24, 
+	clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, 
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 
+	el=\E[K, home=\E[H, ht=^I,
+
+# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
+#
+# The following is an entry for the full ANSI 3.64 (1977).  It lacks
+# padding, but most terminals using the standard are "fast" enough
+# not to require any -- even at 9600 bps.  If you encounter problems,
+# try including the padding specifications.
+#
+# Note: the :as: and :ae: specifications are not implemented here, for
+# the available termcap documentation does not make clear WHICH alternate
+# character set to specify.  ANSI 3.64 seems to make allowances for several.
+# Please make the appropriate adjustments to fit your needs -- that is
+# if you will be using alternate character sets.
+#
+# There are very few terminals running the full ANSI 3.64 standard,
+# so I could only test this entry on one verified terminal (Visual 102).
+# I would appreciate the results on other terminals sent to me.
+#
+# Please report comments, changes, and problems to:
+#
+# U.S. MAIL:   Hugh Hansard
+#              Box: 22830
+#              Emory University
+#              Atlanta, GA. 30322.
+#
+# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
+#
+ansi77|ansi 3.64 standard 1977 version, 
+	am, mir, OTbs,
+	cols#80, it#8, lines#24, 
+	bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
+	cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K, 
+	home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 
+	kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, ri=\EM, 
+	rmir=\E[4l, rmso=\E[m, rmul=\E[m, smir=\E[4h, smso=\E[7m, 
+	smul=\E[4m, 
+
+# Procomm and some other ANSI emulations don't recognize all of the ANSI-
+# standard capabilities.  This entry deletes <cuu>, <cuf>, <cud>, <cub>, and 
+# <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>, 
+# <cuf1>, <cud1> and <cub1>.  Also deleted <ich> and <ich1>, as QModem up to 
+# 5.03 doesn't recognize these.  Finally, we delete <rep> and <ri>, which seem
+# to confuse many emulators.  On the other hand, we can count on these programs
+# doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured 
+# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
+# ANSI.SYS influence.
+# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
+pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode), 
+	OTbs, am, mir, msgr,
+	cols#80, it#8, lines#24, 
+	bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D, cud1=\E[B,
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+	ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, il1=\E[L, ind=^J,
+	kbs=\b, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+	kcuu1=\E[A, khome=\E[H, tbc=\E[2g,
+	use=klone+sgr-dumb,
+pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
+	lines#25, use=pcansi-m,
+pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
+	lines#33, use=pcansi-m,
+pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
+	lines#43, use=pcansi-m,
+# The color versions.  All PC emulators do color...
+pcansi|ibm-pc terminal programs claiming to be ansi, 
+	use=klone+color, use=pcansi-m,
+pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
+	lines#25, use=pcansi,
+pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
+	lines#33, use=pcansi,
+pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
+	lines#43, use=pcansi,
+
+# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
+# If you want pound signs rather than dollars, replace `B' with `A'
+# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
+# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
+ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
+	mc5i,
+	cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
+	cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM, ech=\E[%p1%dX, el1=\E[1K, 
+	hpa=\E[%i%p1%dG, ht=\E[I, ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS,
+	kbs=\b, kcbt=\E[Z, kich1=\E[L,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	mc5=\E[5i, mc4=\E[4i,
+	nel=\r\E[S, rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT,
+	s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, 
+	tbc=\E[2g, vpa=\E[%i%p1%dd, 
+	use=pcansi-m,
+
+# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
+# standard terminfo.  Assumes ANSI.SYS-compatible attributes and color.
+# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
+ansi|ansi/pc-term compatible with color,
+	u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c, u9=\E[c,
+	use=ecma+color, use=klone+sgr, use=ansi-m,
+
+#### Linux consoles
+#
+
+# This entry is good for the 1.2.13 or later version of the Linux console.
+#
+# ***************************************************************************
+# *                                                                         *
+# *                           WARNING:                                      *
+# * Linuxes come with a default keyboard mapping kcbt=^I.  This entry, in   *
+# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
+# * character. Here are the keymap replacement lines that will set this up: *
+# *                                                                         *
+#	keycode  15 = Tab             Tab
+#		alt     keycode  15 = Meta_Tab
+#		shift	keycode  15 = F26
+#	string F26 ="\033[Z"
+# *                                                                         *
+# * This has to use a key slot which is unfortunate (any unused one will    *
+# * do, F26 is the higher-numbered one).  The change ought to be built      *
+# * into the kernel tables.                                                 *
+# *                                                                         *
+# ***************************************************************************
+#
+# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
+# and it matters, turn off <ccc>.  The %02x escape used to implement this is
+# not back-portable to SV curses and not supported in ncurses versions before
+# 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size
+# themselves; this entry assumes that capability.
+#
+linux|linux console, 
+	am, bce, eo, mir, msgr, xenl, xon, 
+	it#8, ncv@, 
+	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 
+	bel=^G, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h, 
+	cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 
+	dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 
+	ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 
+	flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG, 
+	ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 
+	il1=\E[L, ind=^J, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, 
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 
+	kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, 
+	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 
+	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 
+	kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 
+	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
+	khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, 
+	nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, 
+	rmul=\E[24m, rs1=\Ec\E]R, sc=\E7, 
+	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 
+	smir=\E[4h, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, 
+	u7=\E[6n, u8=\E[?6c, u9=\E[c, vpa=\E[%i%p1%dd, 
+	use=klone+sgr, use=ecma+color, 
+linux-m|Linux console no color,
+	colors@, pairs@, setab@, setaf@, setb@, setf@, use=linux,
+linux-c-nc|linux console 1.3.x hack for ncurses only,
+	ccc, 
+	initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
+	oc=\E]R,  
+	use=linux,
+# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
+linux-c|linux console 1.3.6+ with private palette for each virtual console,
+	colors#8, pairs#64,
+	ccc,oc=\E]R,
+	initc=\E]P\
+	%?%p1%{9}%>%t%p1%{10}%-%p'a'%+%c%e%p1%d\
+	%p2%{255}%&%Pr\
+	%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;\
+	%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;\
+	%p3%{255}%&%Pr\
+	%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;\
+	%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;\
+	%p4%{255}%&%Pr\
+	%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;\
+	%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;,
+	use=linux,
+
+# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
+linux-nic|linux with ich/ich1 suppressed for non-curses programs,
+	ich@, ich1@, use=linux,
+
+# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
+# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
+linux-koi8|linux with koi8 alternate character set,
+	acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224, 
+	use=linux, use=klone+koi8acs,
+
+# Another entry for KOI8-r with Qing Long's acsc.
+# (which one better complies with the standard?)
+linux-koi8r|linux with koi8-r alternate character set, 
+	use=linux, use=klone+koi8acs, 
+
+#### NetBSD consoles
+#
+# pcvt termcap database entries (corresponding to release 3.31)
+# Author's last edit-date: [Fri Sep 15 20:29:10 1995]
+#
+# (For the terminfo master file, I translated these into terminfo syntax.
+# Then I dropped all the pseudo-HP entries. we don't want and can't use
+# the :Xs: flag. Then I split :is: into a size-independent <is1> and a
+# size-dependent <is2>.  Finally, I added <rmam>/<smam> -- esr)
+
+# NOTE: <ich1> has been taken out of this entry. for reference, it should
+# be <ich1=\E[@>.  For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
+# (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
+pcvtXX|pcvt vt200 emulator (DEC VT220), 
+	am, km, mir, msgr, xenl, 
+	it#8, vt#3, 
+	acsc=llmmkkiijjuuttvvwwqqxxnnoosspprr``aaffgg~~..--++\054\054hh00yyzz,
+	bel=^G, blink=\E[5m, bold=\E[1m, 
+	civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h,
+	cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, 
+	cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 
+	cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 
+	dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, 
+	ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 
+	il1=\E[L, ind=\ED, indn=\E[%p1%dS,
+	is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177, 
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, 
+	kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, 
+	kf8=\E[25~, khome=\E[1~, kich1=\E[2~, kll=\E[4~, 
+	knp=\E[6~, kpp=\E[5~, nel=\EE, rc=\E8, rev=\E[7m, 
+	rf=/usr/share/tabset/vt100, ri=\EM, rin=\E[%p1%dT, 
+	rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 
+	rmso=\E[27m, rmul=\E[24m, 
+	rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
+	sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, 
+	smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
+
+#	NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
+#	termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
+#	50 lines entries; 80 columns
+pcvt25|dec vt220 emulation with 25 lines, 
+	cols#80, lines#25, is2=\E[1;25r\E[25;1H, use=pcvtXX,
+pcvt28|dec vt220 emulation with 28 lines, 
+	cols#80, lines#28, is2=\E[1;28r\E[28;1H, use=pcvtXX,
+pcvt35|dec vt220 emulation with 35 lines, 
+	cols#80, lines#35, is2=\E[1;35r\E[35;1H, use=pcvtXX,
+pcvt40|dec vt220 emulation with 40 lines, 
+	cols#80, lines#40, is2=\E[1;40r\E[40;1H, use=pcvtXX,
+pcvt43|dec vt220 emulation with 43 lines, 
+	cols#80, lines#43, is2=\E[1;43r\E[43;1H, use=pcvtXX,
+pcvt50|dec vt220 emulation with 50 lines, 
+	cols#80, lines#50, is2=\E[1;50r\E[50;1H, use=pcvtXX,
+
+#	NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
+#	termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
+#	50 lines entries; 132 columns
+pcvt25w|dec vt220 emulation with 25 lines and 132 cols, 
+	cols#132, lines#25, is2=\E[1;25r\E[25;1H, use=pcvtXX,
+pcvt28w|dec vt220 emulation with 28 lines and 132 cols, 
+	cols#132, lines#28, is2=\E[1;28r\E[28;1H, use=pcvtXX,
+pcvt35w|dec vt220 emulation with 35 lines and 132 cols, 
+	cols#132, lines#35, is2=\E[1;35r\E[35;1H, use=pcvtXX,
+pcvt40w|dec vt220 emulation with 40 lines and 132 cols, 
+	cols#132, lines#40, is2=\E[1;40r\E[40;1H, use=pcvtXX,
+pcvt43w|dec vt220 emulation with 43 lines and 132 cols, 
+	cols#132, lines#43, is2=\E[1;43r\E[43;1H, use=pcvtXX,
+pcvt50w|dec vt220 emulation with 50 lines and 132 cols, 
+	cols#132, lines#50, is2=\E[1;50r\E[50;1H, use=pcvtXX,
+
+# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
+# manufactured by Sharp for the Japenese market.
+# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
+x68k|x68k-ite|NetBSD/x68k ITE, 
+	cols#96, lines#32, 
+	khlp=\E[28~, kclr=\E[9~, use=vt220, 
+
+#### FreeBSD console entries
+#
+# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
+# Andrey Chernov maintains the FreeBSD termcap distributions.
+#
+# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
+# or comment out the :cb: capability in the console entry.
+#
+# Alexander Lukyanov reports:
+# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
+# Now el1 clears not only to the line beginning, but also a large chunk
+# of previous line. But there is another bug - ech does not work at all.
+#
+
+# for syscons
+# common entry without semigraphics
+# Bug: The <op> capability resets attributes.
+# Bug? The ech and el1 attributes appear to move the cursor in some cases; for
+# instance el1 does if the cursor is moved to the right margin first.  Removed
+# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
+#
+# Setting colors turns off reverse; we cannot guarantee order, so use ncv.
+# Note that this disables standout with color.
+cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode), 
+	am, bce, bw, eo, msgr, npc, 
+	colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64, 
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 
+	cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 
+	dim=\E[30;1m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 
+	home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, 
+	ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 
+	indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, 
+	kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N, 
+	kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, 
+	kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, 
+	nel=\E[E, op=\E[x, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, 
+	rmso=\E[m, rs1=\E[x\E[m\Ec, setab=\E[4%p1%dm, 
+	setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, 
+cons25|ansis|ansi80x25|freebsd console (25-line ansi mode), 
+	acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371, 
+	use=cons25w, 
+cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode), 
+	colors@, pairs@, 
+	bold@, dim@, op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25, 
+cons30|ansi80x30|freebsd console (30-line ansi mode), 
+	lines#30, use=cons25, 
+cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode), 
+	lines#30, use=cons25-m, 
+cons43|ansi80x43|freebsd console (43-line ansi mode), 
+	lines#43, use=cons25, 
+cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode), 
+	lines#43, use=cons25-m, 
+cons50|ansil|ansi80x50|freebsd console (50-line ansi mode), 
+	lines#50, use=cons25, 
+cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode), 
+	lines#50, use=cons25-m, 
+cons60|ansi80x60|freebsd console (60-line ansi mode), 
+	lines#60, use=cons25, 
+cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode), 
+	lines#60, use=cons25-m, 
+cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic, 
+	acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225, 
+	use=cons25w, 
+cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono), 
+	colors@, pairs@, 
+	op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25r, 
+cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines), 
+	lines#50, use=cons25r, 
+cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono), 
+	lines#50, use=cons25r-m, 
+cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines), 
+	lines#60, use=cons25r, 
+cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono), 
+	lines#60, use=cons25r-m, 
+# ISO 8859-1 FreeBSD console
+cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars, 
+	acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237, 
+	use=cons25w, 
+cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono), 
+	colors@, pairs@, 
+	bold@, dim@, op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25l1, 
+cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines), 
+	lines#50, use=cons25l1, 
+cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono), 
+	lines#50, use=cons25l1-m, 
+cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines), 
+	lines#60, use=cons25l1, 
+cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono), 
+	lines#60, use=cons25l1-m, 
+
+#### 386BSD and BSD/OS Consoles
+#
+
+# This was the original 386BSD console entry (I think).  
+# Some places it's named oldpc3|oldibmpc3.
+# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
+origpc3|origibmpc3|IBM PC 386BSD Console, 
+	am, bw, eo, xon, OTbs,
+	cols#80, lines#25, 
+	acsc=l\332q\304k\277x\263j\331m\300w\302u\264v\301t\303n\305, 
+	bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 
+	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, 
+	el=\E[K, home=\E[H, ind=\E[S, kcub1=\E[D, 
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[Y, 
+	ri=\E[T, rmso=\E[1;0x\E[2;7x, rmul=\E[1;0x\E[2;7x, 
+	sgr0=\E[m\E[1;0x\E[2;7x, smso=\E[1;7x\E[2;0x, 
+	smul=\E[1;7x\E[2;0x, 
+
+# description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
+oldpc3|oldibmpc3|old IBM PC BSD/386 Console, 
+	km, OTbs,
+	lines#25, 
+	bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, 
+	dl1=\E[M, ht=^I, il1=\E[L, ind=^J, kbs=^H, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	khome=\E[H, kich1=\E[L, kll=\E[F, knp=\E[G, 
+	kpp=\E[I, nel=^M^J, sgr0=\E[=R, 
+
+# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
+# Note, the emulator supports many of the additional console features
+# listed in the iBCS2 (e.g. character-set selection) though not all
+# are described here.  This entry really ought to be upgraded.
+# Also note, the console will also work with fewer lines after doing
+# "stty rows NN", e.g. to use 24 lines.
+# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996) 
+# Bug: The <op> capability resets attributes.
+bsdos|BSD/OS console,
+	am, bw, eo, km, xon, OTbs,
+	colors#8, cols#80, it#8, lines#25, pairs#64,
+	bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, 
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[=8F, dl=\E[%p1%dM, 
+	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 
+	il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, 
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 
+	kich1=\E[L, kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, 
+	op=\E[x, rc=\E8, rev=\E[7m, rmso=\E[0m, sc=\E7, 
+	setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m, 
+	smso=\E[7m, 
+bsdos-bold|IBM PC BSD/386 Console with bold instead of underline, 
+	rmul=\E[0m, smul=\E[1m, use=bsdos,
+
+# If you are BSDI, you want the following entries, for the moment.  
+# In release 2.0 they will probably phase out the pc3 and ibmpc3 names
+pc3|IBM PC BSD/386 Console,
+	use=bsdos,
+ibmpc3|pc3-bold|IBM PC BSD/386 Console with bold instead of underline, 
+	smul=\E[1m, use=bsdos-bold,
+
+#### DEC VT100 and compatibles
+#
+# DEC terminals from the vt100 forward are collected here. Older DEC terminals
+# and micro consoles can be found in the `obsolete' section.  More details on
+# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
+# found near the end of this file.
+#
+# Except where noted, these entries are DEC's official terminfos.
+# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
+# Engineering for more information.  Updated terminfos and termcaps 
+# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
+#
+# In October 1995 DEC sold its terminals business, including the VT and Dorio
+# line and trademark, to SunRiver Data Systems.  SunRiver has since changed
+# its name to Boundless Technologies; see http://www.boundless.com.
+#
+
+# NOTE:  Any VT100 emulation, whether in hardware or software, almost
+# certainly includes what DEC called the `Level 1 editing extension' codes;
+# only the very oldest VT100s lacked these and there probably aren't any of
+# those left alive.  To capture these, use one of the VT102 entries.
+#
+# Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
+# since the cursor is left in a different position while in the
+# weird state (concept at beginning of next line, vt100 at end
+# of this line) so all versions of vi before 3.7 don't handle
+# <xenl> right on vt100. The correct way to handle <xenl> is when
+# you output the char in column 80, immediately output CR LF
+# and then assume you are in column 1 of the next line. If <xenl>
+# is on, am should be on too.
+# 
+# I assume you have smooth scroll off or are at a slow enough baud
+# rate that it doesn't matter (1200? or less). Also this assumes
+# that you set auto-nl to "on", if you set it off use vt100-nam 
+# below.
+# 
+# The padding requirements listed here are guesses. It is strongly
+# recommended that xon/xoff be enabled, as this is assumed here.
+# 
+# The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the 
+# tab settings are in non-volatile memory and don't need to be 
+# reset upon login. Also setting the number of columns glitches 
+# the screen annoyingly. You can type "reset" to get them set.
+#
+# Here's a diagram of the VT100 keypad keys with their bindings.
+# The top line is the name of the key (some DEC keyboards have the keys
+# labelled somewhat differently, like GOLD instead of PF1, but this is
+# the most "official" name).  The second line is the escape sequence it
+# generates in Application Keypad mode (where "$" means the ESC
+# character).  The third line contains two items, first the mapping of
+# the key in terminfo, and then in termcap.
+#   _______________________________________
+#  |   PF1   |   PF2   |   PF3   |   PF4   |
+#  |   $OP   |   $OQ   |   $OR   |   $OS   |
+#  |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
+#  |    7         8         9         -    |
+#  |   $Ow   |   $Ox   |   $Oy   |   $Om   |
+#  |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
+#  |    4    |    5    |    6    |    ,    |
+#  |   $Ot   |   $Ou   |   $Ov   |   $Ol   |
+#  |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
+#  |    1    |    2    |    3    |         |
+#  |   $Oq   |   $Or   |   $Os   |  enter  |
+#  |_ka1__K1_|_kb2__K2_|_ka3__K3_|  $OM    |
+#  |         0         |   .     |         |
+#  |        $Op        |  $On    |         |
+#  |___kc1_______K4____|_kc3__K5_|_kent_@8_|
+#
+# And here, for those of you with orphaned VT100s lacking documentation, is
+# a description of the soft switches invoked when you do `Set Up'.
+# 
+#  Scroll 0-Jump               Shifted 3   0-#
+#  |      1-Smooth             |           1-British pound sign
+#  | Autorepeat 0-Off          | Wrap Around 0-Off
+#  | |          1-On           | |           1-On
+#  | | Screen 0-Dark Bkg       | | New Line 0-Off
+#  | | |      1-Light Bkg      | | |        1-On
+#  | | | Cursor 0-Underline    | | | Interlace 0-Off
+#  | | | |      1-Block        | | | |         1-On
+#  | | | |                     | | | |
+#  1 1 0 1       1 1 1 1       0 1 0 0       0 0 1 0       <--Standard Settings
+#                | | | |                     | | | |
+#                | | | Auto XON/XOFF 0-Off   | | | Power 0-60 Hz
+#                | | |               1-On    | | |       1-50 Hz
+#                | | Ansi/VT52 0-VT52        | | Bits Per Char. 0-7 Bits
+#                | |           1-ANSI        | |                1-8 Bits
+#                | Keyclick 0-Off            | Parity 0-Off
+#                |          1-On             |        1-On
+#                Margin Bell 0-Off           Parity Sense 0-Odd
+#                            1-On                         1-Even
+#
+# The following SET-UP modes are assumed for normal operation:
+#	ANSI_MODE	AUTO_XON/XOFF_ON	NEWLINE_OFF	80_COLUMNS
+#	WRAP_AROUND_ON  JUMP_SCROLL_OFF
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements; I recommend
+#	AUTOREPEAT_ON	BLOCK_CURSOR	MARGIN_BELL_OFF    SHIFTED_3_#
+# Unless you have a graphics add-on such as Digital Engineering's VT640
+# (and even then, whenever it can be arranged!) you should set
+#	INTERLACE_OFF
+#
+# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
+vt100|vt100-am|dec vt100 (w/advanced video),
+	OTbs, am, msgr, xenl, xon, 
+	cols#80, lines#24, it#8, vt#3, 
+	cr=^M, cud1=^J, ind=^J, bel=^G, clear=\E[H\E[J$<50>, cub1=^H, 
+	cup=\E[%i%p1%d;%p2%dH$<5>, cuf1=\E[C$<2>, cuu1=\E[A$<2>,
+	el=\E[K$<3>, el1=\E[1K$<3>, ed=\E[J$<50>, cud=\E[%p1%dB, 
+	cuu=\E[%p1%dA, cub=\E[%p1%dD, cuf=\E[%p1%dC, 
+	rmso=\E[m$<2>, smso=\E[7m$<2>, smul=\E[4m$<2>, rmul=\E[m$<2>,
+	bold=\E[1m$<2>, rev=\E[7m$<2>, blink=\E[5m$<2>, sgr0=\E[m^O$<2>,
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;,
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+	enacs=\E(B\E)0, smacs=^N, rmacs=^O,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	tbc=\E[3g, hts=\EH, home=\E[H, ht=^I, ri=\EM$<5>,
+	kcuu1=\EOA, kcud1=\EOB, kcuf1=\EOC, kcub1=\EOD, kbs=^H,
+	smkx=\E[?1h\E=, rmkx=\E[?1l\E>,
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+	kf9=\EOw, kf10=\EOx, kf0=\EOy,
+	kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
+	ka1=\EOq, kb2=\EOr, ka3=\EOs,
+	kc1=\EOp, kc3=\EOn, kent=\EOM,
+	sc=\E7, rc=\E8, csr=\E[%i%p1%d;%p2%dr,
+	rmam=\E[?7l, smam=\E[?7h, 
+vt100nam|vt100-nam|vt100 no automargins,
+	am@, xenl@, use=vt100-am,
+vt100-vb|dec vt100 (w/advanced video) & no beep,
+	flash=\E[?5h\E[?5l, bel@,
+	use=vt100,
+
+# Ordinary vt100 in 132 column ("wide") mode.
+vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
+	cols#132, lines#24, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h,
+	use=vt100-am,
+vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
+	cols#132, lines#14, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, vt@,
+	use=vt100-nam,
+
+# vt100 with no advanced video.
+vt100-nav|vt100 without advanced video option,
+	sgr@, smso=\E[7m, rmso=\E[m, xmc#1,
+	smul@, rmul@, bold@, rev@, blink@, sgr0@, use=vt100,
+vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
+	lines#14, cols#132, use=vt100-nav,
+
+# vt100 with one of the 24 lines used as a status line.
+# We put the status line on the top.
+vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
+	lines#23, is2=\E7\E[2;24r\E8, clear=\E[2;1H\E[J$<50>, home=\E[2;1H,
+	dsl=\E7\E[1;24r\E8,
+	cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, csr=\E[%i%i%p1%d;%p2%dr,
+	hs, eslok, tsl=\E7\E[1;%p1%dH\E[1K, fsl=\E8, use=vt100-am,
+
+# Status line at bottom. 
+# Clearing the screen will clobber status line.
+vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
+	lines#23, is2=\E[1;23r\E[23;1H, dsl=\E7\E[1;24r\E8,
+	hs, eslok, tsl=\E7\E[24;%p1%dH\E[1K, fsl=\E8, use=vt100-am,
+
+# Most of the `vt100' emulators out there actually emulate a vt102
+# This entry (or vt102-nsgr) is probably the right thing to use for
+# these.  
+vt102|dec vt102,
+	mir,
+	dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
+	use=vt100,
+vt102-w|dec vt102 in wide mode,
+	cols#132,
+	rs3=\E[?3h,
+	use=vt102,
+
+# Many brain-dead PC comm programs that pretend to be `vt100-compatible'
+# fail to interpret the ^O and ^N escapes properly.  Symptom: the <sgr0>
+# string in the canonical vt100 entry above leaves the screen littered
+# with little  snowflake or star characters (IBM PC ROM character \017 = ^O)
+# after highlight turnoffs.  This entry should fix that, and even leave
+# ACS support working, at the cost of making multiple-highlight changes 
+# slightly more expensive.
+# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
+vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
+	sgr@, sgr0=\E[m,
+	use=vt102,
+
+# VT125 Graphics CRT.  Clear screen also erases graphics
+vt125|vt125 graphics terminal,
+	clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100, 
+
+# This isn't a DEC entry, it came from University of Wisconsin.
+# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
+vt131|dec vt131, 
+	OTbs, am, xenl, 
+	cols#80, it#8, lines#24, vt#3, 
+	bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 
+	clear=\E[;H\E[2J$<50/>, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, 
+	cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, 
+	cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, 
+	home=\E[H, ht=^I, is2=\E[1;24r\E[24;1H, kbs=^H, 
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M^J, 
+	rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>, rmam=\E[?7l, 
+	rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 
+	rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
+	sgr0=\E[m$<2/>, rmam=\E[?7h, smkx=\E[?1h\E=, smam=\E[?7h,
+	smso=\E[7m$<2/>, smul=\E[4m$<2/>, 
+
+# vt132 - like vt100 but slower and has ins/del line and such.
+# I'm told that <smir>/<rmir> are backwards in the terminal from the
+# manual and from the ANSI standard, this describes the actual 
+# terminal. I've never actually used a vt132 myself, so this 
+# is untested.
+#
+vt132|DEC vt132,
+	il1=\E[L$<99>, dl1=\E[M$<99>, ip=$<7>, dch1=\E[P$<7>, rmir=\E[4h,
+	smir=\E[4l, xenl, ind=^J$<30>, use=vt100,
+
+# vt220:
+# This vt220 description maps F5--F9 to the second block of function keys
+# at the top of the keyboard.  The "DO" key is used as F10 to avoid conflict
+# with the key marked (ESC) on the vt220.  See vt220d for an alternate mapping.
+# PF1--PF4 are used as F1--F4.
+#
+vt220|vt200|DEC VT220 in vt100 emulation mode,
+	OTbs, OTpt, am, mir, xenl, xon,
+	cols#80, lines#24, vt#3,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	OTnl=^J, bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, clear=\E[H\E[2J$<50>, 
+	cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=\b, cud1=\E[B, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
+	dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=\t,
+	if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
+	is2=\E[1;24r\E[24;1H, kbs=\177, kcub1=\EOD, kcud1=\EOB,
+	kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
+	kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
+	kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kf10=\E[29~, rc=\E8,
+	rev=\E[7m$<2>, rf=/usr/share/tabset/vt100, ri=\EM$<14/>,
+	rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
+	sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, smso=\E[7m, 
+	smul=\E[4m,
+	khome=\E[1~, kend=\E[4~, kpp=\E[5~, knp=\E[6~, kdch1=\E[3~, kich1=\E[2~,
+	civis=\E[?25l,cnorm=\E[?25h,
+vt220-w|vt200-w|DEC vt220 in wide mode,
+	cols#132,
+	rs3=\E[?3h,
+	use=vt220,
+
+#
+# vt220d:
+# This vt220 description regards F6--F10 as the second block of function keys
+# at the top of the keyboard.  This mapping follows the description given
+# in the VT220 Programmer Reference Manual and agrees with the labeling
+# on some terminals that emulate the vt220.  There is no support for an F5.
+# See vt220 for an alternate mapping. 
+#
+vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
+	kf5@, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kf10=\E[21~,
+	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
+	use=vt220,
+
+vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h,
+	am@, use=vt220,
+
+# This is misnamed (see xterm-8bit for an example of 8-bit controls)
+vt220-8|dec vt220 8 bit terminal,
+	OTbs, am, mc5i, mir, msgr, xenl, xon,
+	cols#80, it#8, lines#24,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
+	cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
+	cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+	ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+	enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
+	ht=\t, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+	ind=\ED, is2=\E[?7h\E[>\E[?1h\E\sF\E[?4l, kbs=\b,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+	kf13=\E[25~, kf14=\E[26~, kf17=\E[31~, kf18=\E[32~,
+	kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
+	kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+	kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
+	knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
+	lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i,
+	mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
+	ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
+	rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7,
+	sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
+	smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+	if=/usr/share/tabset/vt100, khome=\E[H, 
+
+# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
+# (not an official DEC entry!)
+# The problem with real vt220 terminals is they don't send escapes when in
+# in vt220 mode.  This can be gotten around two ways.  1> don't send
+# escapes or 2> put the vt220 into vt100 mode and use all the nifty
+# features of vt100 advanced video which it then has.
+#
+# This entry takes the view of putting a vt220 into vt100 mode so
+# you can use the escape key in emacs and everything else which needs it.
+#
+# You probably don't want to use this on a VMS machine since VMS will think
+# it has a vt220 and will get fouled up coming out of emacs
+#
+# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
+vt200-js|vt220-js|dec vt200 series with jump scroll, 
+	am, 
+	cols#80, 
+	bel=^G, clear=\E[H\E[J, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 
+	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 
+	il1=\E[L, ind=\ED, 
+	is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m, 
+	kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 
+	kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
+	nel=^M\ED, rf=/usr/lib/tabset/vt100, ri=\EM, rmdc=, 
+	rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, 
+	rmul=\E[24m, rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 
+	smdc=, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, 
+	smul=\E[4m,
+ 
+# This was DEC's vt320.  Use the purpose-built one below instead 
+#vt320|DEC VT320 in vt100 emulation mode,
+#	use=vt220,
+
+#
+# Use v320n for SCO's LYRIX.  Otherwise, use Adam Thompson's vt320-nam.
+#
+vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h,
+	am@, use=vt220,
+
+# These entries are not DEC's official ones, they were purpose-built for the 
+# VT320.  Here are the designer's notes:
+# <kel> is end on a PC kbd.  Actually 'select' on a VT.  Mapped to 
+# 'Erase to End of Field'... since nothing seems to use 'end' anyways...
+# khome is Home on a PC kbd.  Actually 'FIND' on a VT.
+# Things that use <knxt> usually use tab anyways... and things that don't use
+# tab usually use <knxt> instead...
+# kprv is same as tab - Backtab is useless...
+# I left out <sgr> because of its RIDICULOUS complexity,
+# and the resulting fact that it causes the termcap translation of the entry
+# to SMASH the 1k-barrier...
+# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995
+# (vt320: uncommented <fsl> --esr) 
+vt320|vt300|dec vt320 7 bit terminal,
+	am, eslok, hs, mir, msgr, xenl,
+	cols#80, lines#24, wsl#80,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
+	cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
+	cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP,
+	dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, .dsl=\E[1$}\E[H\E[K\E[0$},
+	ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$}, home=\E[H, 
+	ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+	is2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+	ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kbs=\177,
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
+	kel=\E[4~, kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kf10=\E[21~,
+	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
+	khome=\E[1~, kich1=\E[2~, knxt=^I, knp=\E[6~, kpp=\E[5~, kprv=\E[Z,
+	kslt=\E[4~, mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, rc=\E8,
+	rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
+	rmso=\E[m, rmul=\E[m, rf=/usr/share/tabset/vt300,
+	rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+	sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
+	smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[H\E[K, 
+vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
+	am@,
+	is2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
+	rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
+	use=vt320,
+# We have to init 132-col mode, not 80-col mode.
+vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
+	cols#132,
+	wsl#132,
+	is2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+	rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+	use=vt320,
+vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
+	am@,
+	is2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
+	rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
+	use=vt320-w,
+
+# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
+#   which are pretty much a superset of the VT320.  They have the
+#   host writable status line, yet another different DRCS matrix size,
+#   and such, but they add the DEC Technical character set, Multiple text
+#   pages, selectable length pages, and the like.  The difference between
+#   the vt330 and vt340 is that the latter has only 2 planes and a monochrome
+#   monitor, the former has 4 planes and a color monitor.  These terminals
+#   support VT131 and ANSI block mode, but as with much of these things,
+#   termcap/terminfo doesn't deal with these features.
+#
+# Note that this entry is are set up in what was the standard way for GNU
+# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
+# keys were switched into application mode at the same time the numeric pad
+# is switched into application mode.  This changes the definitions of the
+# arrow keys.  Emacs v19 is smarter and mines its keys directly out of 
+# your termcap or terminfo entry,
+#
+# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
+# (vt340: string capability "sb=\E[M" corrected to "sr";
+# also, added <rmam>/<smam> based on the init string -- esr)
+vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page, 
+	am, eslok, hs, mir, msgr, xenl, xon, 
+	cols#80, it#8, lines#24, vt#3, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
+	clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, 
+	dl=\E[%p1%dM, dl1=\E[M, 
+	dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, 
+	flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, home=\E[H, 
+	ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 
+	il1=\E[L, ind=\ED, 
+	is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 
+	kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 
+	kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
+	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
+	lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=^M\ED, 
+	rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt300, 
+	ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 
+	rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7, 
+	sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, 
+	smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
+	tsl=\E[2$~\E[1$}\E[1;%dH,
+
+# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
+# (originally written with vt420 as its primary name, and usable for it).
+# 
+# VT400/420 -- This terminal is a superset of the vt320.  It adds the multiple 
+#    text pages and long text pages with selectable length of the vt340, along
+#    with left and right margins, rectangular area text copy, fill, and erase
+#    operations, selected region character attribute change operations,
+#    page memory and rectangle checksums, insert/delete column, reception
+#    macros, and other features too numerous to remember right now.  TERMCAP
+#    can only take advantage of a few of these added features.
+#
+# Note that this entry is are set up in what was the standard way for GNU
+# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
+# keys were switched into application mode at the same time the numeric pad
+# is switched into application mode.  This changes the definitions of the
+# arrow keys.  Emacs v19 is smarter and mines its keys directly out of 
+# your termcap entry,
+#
+# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
+# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
+# also, added <rmam>/<smam> based on the init string -- esr)
+vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap, 
+	am, eslok, hs, mir, msgr, xenl, xon, 
+	cols#80, it#8, lines#24, vt#3, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
+	clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, 
+	dl=\E[%p1%dM, dl1=\E[M, 
+	dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>, 
+	el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, 
+	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 
+	ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 
+	is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 
+	kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 
+	kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
+	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
+	lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=^M\ED, 
+	rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt300, 
+	ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 
+	rmso=\E[27m, rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, 
+	sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, 
+	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
+	tsl=\E[2$~\E[1$}\E[1;%dH, 
+
+# (vt420: I removed <kf0>, it collided with <kf10>.  I also restored
+# a missing <sc> -- esr)
+vt420|DEC VT420,
+	am, mir, xenl, xon,
+	cols#80, lines#24, vt#3,
+	bel=^G, blink=\E[5m$<2>,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bold=\E[1m$<2>, clear=\E[H\E[2J$<50>, cr=\r,
+	csr=\E[%i%p1%d;%p2%dr, cub1=\b, cud1=\E[B, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
+	dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=\t,
+	if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
+	is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p,
+	kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
+	kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kf10=\E[29~,
+	kfnd=\E[1~, kich1=\E[2~, kdch1=\E[3~,
+	knp=\E[6~, kpp=\E[5~, kslt=\E[4~,
+	rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, ri=\EM,
+	rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
+	rs3=\E[?67h\E[64;1"p,
+	rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
+	sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
+	smul=\E[4m, smkx=\E=, rmkx=\E>,
+
+#
+# DEC VT220 and up support DECUDK (user-defined keys).  DECUDK (i.e., pfx)
+# takes two parameters, the key and the string.  Translating the key is
+# straightforward (keys 1-5 are not defined on real terminals, though some
+# emulators define these):
+#
+#               if (key < 16) then  value = key;
+#               else if (key < 21) then value = key + 1; 
+#               else if (key < 25) then value = key + 2;
+#               else if (key < 27) then value = key + 3;
+#               else if (key < 30) then value = key + 4;
+#               else value = key + 5;
+#
+# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT". 
+# There's no provision in terminfo for emitting a string in this format, so the
+# application has to know it.
+#
+vt420pc|DEC VT420 w/PC keyboard,
+	pctrm=USR_TERM:vt420pcdos:,
+	kdch1=^?, khome=\E[H, kend=\E[4~,
+	kf1=\E[11~,  kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
+	kf6=\E[17~,  kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kf10=\E[21~,
+	kf11=\E[23~, kf12=\E[24~,
+	kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~, kf16=\E[14;2~,
+	kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf20=\E[19;2~,
+	kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
+	kf25=\E[23~,   kf26=\E[24~,   kf27=\E[25~,   kf28=\E[26~,
+	kf29=\E[28~,   kf30=\E[29~,   kf31=\E[31~,   kf32=\E[32~,
+	kf33=\E[33~,   kf34=\E[34~,   kf35=\E[35~,   kf36=\E[36~, 
+	kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf40=\E[26;2~,
+	kf41=\E[28;2~, kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
+	kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~,
+	pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
+	use=vt420,
+
+vt420pcdos|DEC VT420 w/PC for DOS Merge,
+	pctrm@,
+	smsc=\E[?1;2r\E[34h,
+	rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+	dispc=%?%p2%{19}%=%t\E\023\021%e%p2%{32}%<%t\E%p2%c%e%p2%{127}%=%t\E\177%e%p2%c%;,
+	sgr@,
+	sgr0=\E[m,
+	lines#25,
+	use=vt420pc,
+
+vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
+	kdch1=^?, khome=\E[H, 
+	kf1=\E[11~,  kf2=\E[12~,  kf3=\E[13~,  kf4=\E[14~,  kf5=\E[15~,
+	kf6=\E[17~,  kf7=\E[18~,  kf8=\E[19~,  kf9=\E[20~,  kf10=\E[21~,
+	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
+	lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
+	use=vt420,
+
+vt510|DEC VT510,
+	use=vt420,
+vt510pc|DEC VT510 w/PC keyboard,
+	use=vt420pc,
+vt510pcdos|DEC VT510 w/PC for DOS Merge,
+	use=vt420pcdos,
+
+# VT520/VT525
+#
+# The VT520 is a monochrome text terminal capable of managing up to
+# four independent sessions in the terminal.  It has multiple ANSI
+# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
+# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
+# 925 910+, ADDS A2).  This terminfo data is for the ANSI emulations only.
+#
+# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
+# [Alt]/[Print Screen] depending upon which keyboard and which
+# terminal mode is being used.  If Set-Up has been disabled or
+# assigned to an unknown key, Set-Up may be entered by pressing
+# [F3] as the first key after power up, regardless of keyboard type.
+# (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
+vt520|DEC VT520,
+	am, mir, xenl, xon,
+	cols#80, lines#24, vt#3,
+	bel=^G, blink=\E[5m$<2>,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bold=\E[1m$<2>, clear=\E[H\E[2J$<50>, cr=\r,
+	csr=\E[%i%p1%d;%p2%dr, cub1=\b, cud1=\E[B, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
+	dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=\t,
+	if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
+	is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p,
+	kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kf0=\E[29~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
+	kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kf10=\E[29~,
+	kfnd=\E[1~, kich1=\E[2~, kdch1=\E[3~,
+	knp=\E[6~, kpp=\E[5~, kslt=\E[4~,
+	rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, ri=\EM,
+	rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
+	rs3=\E[?67h\E[64;1"p,
+	rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
+	sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
+	smul=\E[4m,
+	pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
+
+# (vt525: I added <rmam>/<smam> based on the init string;
+# removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
+vt525|DEC VT525,
+	am, mir, xenl, xon,
+	cols#80, lines#24, vt#3,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m$<2>,
+	bold=\E[1m$<2>, clear=\E[H\E[2J$<50>, cr=\r,
+	csr=\E[%i%p1%d;%p2%dr, cub1=\b, cud1=\E[B, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
+	dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=\t,
+	if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
+	is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p,
+	kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kf0=\E[29~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
+	kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kf10=\E[29~,
+	kfnd=\E[1~, kich1=\E[2~, kdch1=\E[3~,
+	knp=\E[6~, kpp=\E[5~, kslt=\E[4~,
+	rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, ri=\EM,
+	rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
+	rs3=\E[?67h\E[64;1"p,
+	rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
+	sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
+	smul=\E[4m,
+	pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
+
+#### VT100 emulations
+#
+
+# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
+# (the best Windows telnet as of September 1995) presents the name `dec-vt100'
+# to telnetd.   Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
+# that this works best with a stock vt100 entry.
+dec-vt100|EWAN telnet's vt100 emulation,
+	use=vt100,
+
+# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
+dec-vt220|DOS tnvt200 terminal emulator,
+	am@, use=vt220,
+
+# NCSA telnet  is one of  the most used telnet  clients for the Macintosh.
+# It  has  been maintained  until  recently   by  the National  Center for
+# Supercomputer Applications, and it is feature rich, stable and free.  It
+# can be downloaded from www.ncsa.edu.  This  terminfo description file is
+# based on xterm-vt220, xterm+sl, and the docs at NCSA.  It works well.
+#
+#       NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
+#       The terminal options should be set as follows:
+#         Xterm sequences ON
+#         use VT wrap mode ON
+#         use Emacs arrow keys OFF
+#         CTRL-COMND is Emacs meta ON
+#         8 bit mode ON
+#         answerback string: "ncsa-vt220-8"
+#         setup keys: all disabled
+#
+#       Application mode is not used
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 3 Aug 1998
+ncsa-m|ncsa-vt220|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
+        am, hs, km, mir, msgr, xenl,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G,
+	blink=\e[5m, bold=\e[1m, civis=\e[?25l, clear=\e[H\e[2J,
+	cnorm=\e[?25h, cr=^M, csr=\e[%i%p1%d;%p2%dr, cub1=^H,
+	cub=\e[%p1%dD, cud1=^J, cud=\e[%p1%dB, cuf1=\e[C, cuf=\e[%p1%dC,
+	cup=\e[%i%p1%d;%p2%dH, cuu1=\e[A, cuu=\e[%p1%dA, dch1=\e[P,
+	dch=\e[%p1%dP, dl1=\e[M, dl=\e[%p1%dM, dsl=\e]0;^G, ed=\e[J,
+	el=\e[K, enacs=\e)0, fsl=^G, home=\e[H, ht=^I,
+	if=/usr/share/tabset/vt100, il1=\e[L, il=\e[%p1%dL, ind=^J,
+	is2=\e7\e[r\e[m\e[?7h\e[?1;4;6l\e[4l\e8\e>, kbs=^H, kcub1=\e[D,
+	kcud1=\e[B, kcuf1=\e[C, kcuu1=\e[A, kdch1=\e[4~, kf10=\e[28~,
+	kf11=\e[29~, kf12=\e[31~, kf13=\e[32~, kf14=\e[33~, kf15=\e[34~,
+	kf1=\e[17~, kf2=\e[18, kf3=\e[19~, kf4=\e[20~, kf5=\e[21~,
+	kf6=\e23~, kf7=\e[24~, kf8=\e[25~, kf9=\e[26~, khome=\e[2~,
+	kich1=\e[1~, kll=\e[5~, knp=\e[6~, kpp=\e[3~, rc=\e8, rev=\e[7m,
+	rf=/usr/share/tabset/vt100, ri=\eM, rmacs=^O, rmam=\e[?7l,
+	rmcup=\e[2J\e[?47l\e8, rmir=\e[4l, .rmkx=\e>, rmso=\e[27m,
+	rmul=\e[24m, rs2=\e7\e[r\e[m\e[?7h\e[?1;4;6l\e[4l\e8\e>, sc=\e7,
+	sgr0=\e[m,
+	sgr=\e[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\e(0%e
+\e(B%;,
+	smacs=^N,
+	smam=\e[?7h',
+	smcup=\e7\e[?47h,
+	smir=\e[4h,
+	.smkx=\e=,
+	smso=\e[7m,
+	smul=\e[4m,
+	tbc=\e[3g,
+	tsl=\e]0;,
+ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
+# NCSA 2.7 has ANSI colours
+# colours collide with blinking, hence ncv
+        colors#8,
+        ncv#8,
+        pairs#64,
+        op=\e[39;49m,
+        setab=\e[4%p1%dm,
+        setaf=\e[3%p1%dm,
+        use=ncsa-m,
+ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
+# colours, no status line
+        hs@, tsl@, fsl@, dsl@, use=ncsa,
+ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
+# no colours, no status line
+        hs@, tsl@, fsl@, dsl@, use=ncsa-m,
+
+# Zstem340 is an (IMHO) excellent VT emulator for PC's.  I recommend it to
+# anyone who needs PC VT340 emulation. (or anything below that level, for
+# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
+# RDBM systems, it includes ReGIS and SiXel support!  I'm impressed...
+# I can send the address if requested.
+# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
+# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995
+z340|zstem vt340 terminal emulator 132col 42line,
+	lines#42,
+	is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
+	rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
+	use=vt320-w,
+z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
+	am@,
+	is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
+	rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
+	use=z340,
+
+#### X terminal emulators
+#
+# You can add the following line to your .Xdefaults to change the terminal type
+# set by the xterms you start up to my-xterm:
+#
+# *termName:  my-xterm
+#
+# System administrators can change the default entry for xterm instances
+# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm.  In either
+# case, xterm will detect and reject an invalid terminal type, falling back
+# to the default of xterm.
+#
+
+# X10/6.6	11/7/86, minus alternate screen, plus (csr)
+# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
+# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
+# as these seem not to work -- esr)
+x10term|vs100-x10|xterm terminal emulator (X10 window system), 
+	OTbs, am, km, mir, msgr, xenl, xon, 
+	cols#80, it#8, lines#65, 
+	bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, 
+	cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 
+	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, 
+	il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H, 
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 
+	kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l, 
+	rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 
+	sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, 
+	smso=\E[7m, smul=\E[4m, 
+# Compatible with the R5 xterm 
+# (from the XFree86 3.2 distribution, <blink=@> removed)
+xterm-r5|xterm R5 version, 
+	OTbs, am, km, msgr, xenl, 
+	cols#80, it#8, lines#24, 
+	bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
+	el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 
+	il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, 
+	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, 
+	kdl1=\E[31~, kel=\E[8~, kf0=\EOq, kf1=\E[11~, kf10=\E[21~, 
+	kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, 
+	kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 
+	kf9=\E[20~, khome=\E[7~, kich1=\E[2~, kil1=\E[30~, 
+	knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, 
+	rmkx=\E[?1l\E>, rmso=\E[m, 
+	rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, sc=\E7, 
+	sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 
+	sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, tbc=\E[3g, 
+# Compatible with the R6 xterm
+# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
+xterm-r6|xterm-old|xterm X11R6 version, 
+	OTbs, am, km, mir, msgr, xenl, 
+	cols#80, it#8, lines#24, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
+	el=\E[K, enacs=\E)0, home=\E[H, ht=^I, il=\E[%p1%dL, 
+	il1=\E[L, ind=^J, 
+	is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^H, 
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	kdch1=\E[3~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 
+	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 
+	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 
+	kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~, 
+	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 
+	kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El, 
+	memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 
+	rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, 
+	rmso=\E[m, rmul=\E[m, 
+	rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7, 
+	sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, 
+	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
+# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
+# The name has been changed and some aliases have been removed.
+xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System), 
+	OTbs, am, bce, km, mir, msgr, xenl, 
+	colors#8, cols#80, it#8, lines#24, pairs#64, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 
+	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 
+	dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 
+	enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, 
+	hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 
+	il=\E[%p1%dL, il1=\E[L, ind=^J, 
+	is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, 
+	ka1=\EOw, ka3=\EOu, kb2=\EOy, kbeg=\EOE, kbs=^H, kc1=\EOq, 
+	kc3=\EOs, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	kdch1=\177, kend=\EOF, kent=\EOM, kf1=\E[11~, kf10=\E[21~, 
+	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 
+	kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 
+	kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, 
+	kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 
+	kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~, 
+	kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El, 
+	memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 
+	rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 
+	rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=^O, 
+	rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7, 
+	setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 
+	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
+	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 
+	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, 
+	smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 
+	tbc=\E[3g, vpa=\E[%i%p1%dd, 
+
+# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
+# codes for F1-F4 except while in VT220 mode.
+xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System), 
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
+	use=xterm-xf86-v32, 
+
+# This beta version will probably be released in XFree86 4.0 in 1998.
+# Besides providing printer support, it exploits a new feature that allows
+# xterm to use terminfo-based descriptions with the titeInhibit resource.
+xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System), 
+	mc5i, 
+	mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l, 
+	rs1=\Ec, smcup=\E[?1048h\E[?1047h, 
+	use=xterm-xf86-v33, 
+
+# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
+xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
+	rmso=\E[m, rmul=\E[m,
+	use=xterm-xf86-v33, 
+
+# This is one of the variants from XFree86 3.3 xterm, updated for 4.0
+# From Thomas S. Dickey <dickey@clark.net>, 11 May 1998
+xterm-16color|xterm with 16 colors like aixterm, 
+	colors#16, ncv#32, pairs#256, 
+	setab@, setaf@, 
+	setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, 
+	setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, 
+	use=xterm-xf86-v40, 
+
+# This is another variant, for XFree86 4.0 xterm (T.Dickey)
+# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
+# To use it, your decTerminalID resource must be set to 200 or above.
+#
+#	HTS	\E H	\210
+#	RI	\E M	\215
+#	SS3	\E O	\217
+#	CSI	\E [	\233
+#
+xterm-8bit|xterm terminal emulator 8-bit controls (X Window System), 
+	OTbs, am, bce, km, mc5i, mir, msgr, xenl, 
+	colors#8, cols#80, it#8, lines#24, pairs#64, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	bel=^G, bold=\2331m, cbt=\233Z, civis=\233?25l, 
+	clear=\233H\2332J, cnorm=\233?25h, cr=^M, 
+	csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, 
+	cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, 
+	cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, 
+	cvvis=\233?25h, dch=\233%p1%dP, dch1=\233P, 
+	dl=\233%p1%dM, dl1=\233M, ech=\233%p1%dX, ed=\233J, 
+	el=\233K, el1=\2331K, enacs=\E(B\E)0, 
+	flash=\233?5h\233?5l, home=\233H, hpa=\233%i%p1%dG, 
+	ht=^I, hts=\210, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL, 
+	il1=\233L, ind=^J, 
+	is2=\E7\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>, 
+	ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H, 
+	kc1=\217q, kc3=\217s, kcub1=\217D, kcud1=\217B, 
+	kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\217F, 
+	kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~, 
+	kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, 
+	kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, 
+	kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~, 
+	kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~, 
+	kf9=\23320~, kfnd=\2331~, khome=\217H, kich1=\2332~, 
+	kmous=\233M, knp=\2336~, kpp=\2335~, kslt=\2334~, 
+	mc0=\233i, mc4=\2334i, mc5=\2335i, meml=\El, memu=\Em, 
+	op=\23339;49m, rc=\E8, rev=\2337m, ri=\215, rmacs=^O, 
+	rmam=\233?7l, rmcup=\2332J\233?47l\E8, rmir=\2334l, 
+	rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, rs1=\Ec, 
+	rs2=\E7\E[62"p\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>, 
+	sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm, 
+	setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
+	setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
+	sgr=\2330%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 
+	sgr0=\233m^O, smacs=^N, smam=\233?7h, smcup=\E7\233?47h, 
+	smir=\2334h, smkx=\233?1h\E=, smso=\2337m, smul=\2334m, 
+	tbc=\2333g, vpa=\233%i%p1%dd, 
+
+# This is xterm for ncurses. It mainly adds mappings for more high-half
+# characters.  Note that these will only work for fixed-width fonts.
+xterm|vs100|xterms|xterm terminal emulator (X Window System), 
+	acsc=++\,\,--..00``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	kmous=\E[M, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 
+	use=xterm-r6, 
+
+# These entries allow access to the X titlebar and icon name as a status line. 
+# Note that twm (and possibly window managers descended from it such as tvtwm, 
+# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
+# with it.
+xterm+sl|access X title line and icon name, 
+	hs, 
+	wsl#40, 
+	dsl=\E]0;\007, fsl=^G, tsl=\E]0;, 
+xterm+sl-twm|access X title line (pacify twm-descended window managers), 
+	hs, 
+	wsl#40, 
+	dsl=\E]2;\007, fsl=^G, tsl=\E]2;, 
+
+#
+# The following xterm variants don't depend on your base version
+#
+xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold, 
+	smso=\E[1m, 
+	use=xterm, 
+# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
+# (kterm should not invoke DEC Graphics as the alternate character set
+#  -- Kenji Rikitake)
+kterm|kterm kanji terminal emulator (X window system), 
+	eslok, hs, 
+	acsc@, csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs@, fsl=\E[?F, 
+	kmous=\E[M, op=\E[39;49m, rc=\E8, rmacs@, sc=\E7, smacs@, 
+	tsl=\E[?E\E[?%i%dT, 
+	use=xterm-r6, use=klone+color, 
+# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
+xterm-nic|xterm with ich/ich1 suppressed for non-curses programs, 
+	ich@, ich1@, 
+	use=xterm, 
+# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996 
+xterm1|xterm terminal emulator ignoring the alternate screen buffer, 
+	rmcup@, smcup@, 
+	use=xterm, 
+
+# This describes the capabilities of color_xterm, an xterm variant from
+# before ECMA-64 color support was folded into the main-line xterm release.
+# This entry is straight from color_xterm's maintainer.
+# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
+# The README's with the distribution also say that it supports SGR 21, 24, 25
+# and 27, but they are not present in the terminfo or termcap.
+color_xterm|cx|cx100|color_xterm color terminal emulator for X, 
+	OTbs, am, km, mir, msgr, xenl, 
+	colors#8, cols#80, it#8, lines#65, pairs#64, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
+	el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I, 
+	ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 
+	is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, ka1=\EOw, ka3=\EOy, 
+	kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\EOD, kcud1=\EOB, 
+	kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kent=\EOM, kf1=\E[11~, 
+	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, 
+	kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 
+	kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~, 
+	kmous=\E[M, knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, 
+	rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, 
+	rmcup=\E>\E[?41;1r, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 
+	rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<, 
+	sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 
+	sgr0=\E[m, smacs=^N, smam=\E[?7h, 
+	smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m, 
+	smul=\E[4m, 
+
+# The 'nxterm' distributed with Redhat Linux is a slight rehack of
+# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
+# SGR 39 or 49.  SGR 0 does reset colors (along with everything else).  This
+# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
+# that each of those implements the home, end, delete keys differently.
+nxterm|xterm-color|generic color xterm,
+	use=xterm-r6,
+	use=klone+color,
+	op=\E[m,
+
+# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
+# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
+# Notes:
+# rxvt 2.21b uses
+#	smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
+# but some applications don't work with that.
+# It also has an AIX extension
+#	box2=lqkxjmwuvtn,
+# and
+#	ech=\E[%p1%dX,
+# but the latter does not work correctly.
+#
+# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
+# Since rxvt is not really compatible with xterm, it should be configured as
+# "rxvt" (monochrome) and "rxvt-color". 
+rxvt-basic|rxvt terminal base (X Window System), 
+	am, bce, eo, km, mir, msgr, xenl, xon, 
+	cols#80, it#8, lines#24, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
+	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 
+	dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 
+	flash=\E[?5h\E[?5l, home=\E[H, ht=^I, hts=\EH, 
+	ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 
+	is1=\E[?47l\E=\E[?1l, 
+	is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, 
+	kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kLFT=\E[d, kNXT=\E[6$, 
+	kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, 
+	kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^, 
+	kend=\E[8~, kent=\EOM, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~, 
+	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 
+	kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 
+	kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, 
+	kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 
+	kf9=\E[20~, kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, 
+	kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, 
+	rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 
+	rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 
+	rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 
+	rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>, 
+	s0ds=\E(B, s1ds=\E(0, sc=\E7, sgr0=\E[0m\017, smacs=^N, 
+	smcup=\E7\E[?47h, smir=\E[4h, smkx=\E=, smso=\E[7m, 
+	smul=\E[4m, tbc=\E[3g, 
+rxvt|rxvt terminal emulator (X Window System), 
+	colors#8, pairs#64, 
+	op=\E[39;49m, setab=\E[%p1%{40}%+%dm, 
+	setaf=\E[%p1%{30}%+%dm, sgr0=\E[m\017, use=rxvt-basic, 
+
+# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
+# Here's a termcap entry I've been using for xterm_color, which comes
+# with BSD/OS 2.0, and the X11R6 contrib tape too I think.  Besides the
+# color stuff, I also have a status line defined as the window manager
+# title bar. [I have translated it to terminfo -- ESR]
+xterm-pcolor|xterm with color used for highlights and status line, 
+	bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m, 
+	smul=\E[4m\E[42m, 
+	use=xterm+sl, use=xterm-r6, 
+
+# HP ships this, except for the pb#9600 which was merged in from BSD termcap.
+# (hpterm: added empty <acsc>, we have no idea what ACS chars look like --esr)
+hpterm|X-hpterm|hp X11 terminal emulator, 
+	am, da, db, mir, xhp, 
+	cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0, 
+	acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, 
+	cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, 
+	cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK, 
+	hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H, 
+	kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 
+	kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, 
+	kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 
+	khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, 
+	knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El, 
+	memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 
+	pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 
+	pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 
+	pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET, 
+	rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, 
+	rmul=\E&d@, 
+	sgr=\E&d%?%p7%t%'s'%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%'@'%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, 
+	sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, 
+	smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 
+
+# This entry describes an xterm with Sun-style function keys enabled
+# via the X resource setting "xterm*sunFunctionKeys:true"
+# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
+# The <kf13>...<kf20> keys are L3-L10.  We don't set <kf16=\E[197z>
+# because we want it to be seen as <kcpy>. 
+# The <kf31>...<kf45> keys are R1-R15.  We treat some of these in accordance
+# with their Sun keyboard labels instead.
+# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
+xterm-sun|xterm with sunFunctionKeys true, 
+	kb2=\E[218z, kcpy=\E[197z, kend=\E[220z, kf1=\E[224z, 
+	kf10=\E[233z, kf11=\E[192z, kf12=\E[193z, kf13=\E[194z, 
+	kf14=\E[195z, kf15=\E[196z, kf17=\E[198z, kf18=\E[199z, 
+	kf19=\E[200z, kf2=\E[225z, kf20=\E[201z, kf3=\E[226z, 
+	kf31=\E[208z, kf32=\E[209z, kf33=\E[210z, kf34=\E[211z, 
+	kf35=\E[212z, kf36=\E[213z, kf38=\E[215z, kf4=\E[227z, 
+	kf40=\E[217z, kf42=\E[219z, kf44=\E[221z, kf5=\E[228z, 
+	kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, 
+	kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, kich1=\E[2z, 
+	knp=\E[222z, kpp=\E[216z, kund=\E[195z, 
+	use=xterm, 
+xterms-sun|small (80x24) xterm with sunFunctionKeys true, 
+	cols#80, lines#24, use=xterm-sun, 
+
+# This is for the extensible terminal emulator on the X11R6 contrib tape.
+emu|emu native mode, 
+	mir, msgr, xon, 
+	colors#15, cols#80, it#8, lines#24, pairs#64, vt#200, 
+	acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244, 
+	bel=^G, blink=\ES\EW, bold=\ES\EU, civis=\EZ, 
+	clear=\EP\EE0;0;, cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, 
+	cub=\Eq-%p1%d;, cub1=^H, cud=\Ep%p1%d;, cud1=\EB, 
+	cuf=\Eq%p1%d;, cuf1=\ED, cup=\EE%p1%d;%p2%d;, 
+	cuu=\Ep-%p1%d;, cuu1=\EA, cvvis=\Ea, dch=\EI%p1%d;, 
+	dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;, ech=\Ej%p1%d;, ed=\EN, 
+	el=\EK, el1=\EL, enacs=\0, home=\EE0;0;, ht=^I, hts=\Eh, 
+	il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, is2=\ES\Er0;\Es0;, 
+	kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, kcuu1=\EA, 
+	kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, kf10=\EF10, 
+	kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, kf15=\EF15, 
+	kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, kf2=\EF02, 
+	kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, kf6=\EF06, 
+	kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, kich1=\Eins, 
+	knp=\Enext, kpp=\Eprior, kslt=\Esel, oc=\Es0;\Er0;, 
+	rev=\ES\ET, ri=\EF, rmacs=\0, rmir=\EX, rmso=\ES, rmul=\ES, 
+	rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;, setaf=\Er%i%p1%d;, 
+	sgr0=\ES, smacs=\0, smir=\EY, smso=\ES\ET, smul=\ES\EV, 
+	tbc=\Ej, 
+
+######## COMMERCIAL WORKSTATION CONSOLES
+#
+
+#### Alpha consoles
+#
+
+# This is from the OSF/1 Release 1.0 termcap file
+pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation, 
+	am, xon, 
+	cols#80, lines#25, 
+	bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, 
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 
+	dch1=\E[P, dl1=\E[M, el=\E[K, home=\E[H, ht=^I, 
+	ich1=\E[@, il1=\E[L, kbs=^H, kcub1=\E[D, 
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 
+	nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, 
+	smso=\E[7m, 
+
+#### AT&T consoles
+#
+
+# This actually describes the generic SVr4 display driver for Intel boxes.
+# The <dim=\E[2m> isn't documented and therefore may not be reliable.
+# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
+att6386|at386|386at|AT&T WGS 6386 console, 
+	am, bw, eo, xon,
+	cols#80, it#8, lines#25,
+	acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
+	clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD, cub1=\E[D, 
+	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[1M, 
+	ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, 
+	hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 
+	ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, 
+	indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, 
+	kbs=^H, kcbt=^], kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kend=\E[Y, kf1=\EOP, 
+	kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 
+	kf7=\EOV, kf8=\EOW, kf9=\EOX, kf10=\EOY, kf11=\EOZ, kf12=\EOA, 
+	khome=\E[H, kich1=\E[@, knp=\E[U, kpp=\E[V, krmir=\E0, 
+	nel=\r\E[S, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, 
+	rmacs=\E[10m, rmso=\E[m, rmul=\E[m, sc=\E7,
+	sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
+	sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, 
+	smul=\E[4m, tbc=\E[2g, vpa=\E[%i%p1%dd, 
+	use=klone+color,
+# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
+pc6300plus|AT&T 6300 plus, 
+	am, xon, OTbs,
+	cols#80, lines#24, 
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C, clear=\E[2J\E[H,
+	cr=^M, cnorm=\E[=1C, cub1=^H, 
+	cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, 
+	cuu1=\E[A, dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K, 
+	ind=^J, home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, invis=\E[9m, 
+	kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe, kf4=\EOf, 
+	kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk, 
+	nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, 
+	sgr0=\E[m, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
+
+# From: Benjamin C. W. Sittler <bsittler@nmt.edu>
+#
+# I have a UNIX PC which I use as a terminal attached to my Linux PC.
+# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
+# is broken. All the special key sequences are broken, making it unusable
+# with Emacs. The problem stems from the following:
+# 
+# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
+# keypad!), loadable fonts, and strange highlighting modes ("dithered"
+# half-intensity, "smeared" bold, and real strike-out, for example.) It also
+# uses resizable terminal windows, but the bundled terminal program always
+# uses an 80x24 window (and doesn't support seem to support a 132-column
+# mode.) 
+# 
+# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
+# library which was a superset of SVr3.5 curses (called tam, for "terminal
+# access method".) tam includes support for real, overlapping windows,
+# onscreen function key labels, and bitmap graphics. But since the primary
+# user interface on the UNIX PC was a GUI program (ua, for "user
+# assistant",) and remote administration was considered important for the
+# machine, tam also supported VT100-compatible terminals attached to the
+# serial port or used across the StarLan network. To simulate the extra keys
+# not present on a VT100, users could press ESC and a two-letter sequence,
+# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
+# however, were not the same as those sent by the actual Undo key. The
+# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
+# (If you're interested in adding some of the tam calls to ncurses, btw, I
+# have the full documentation and several programs which use tam. It also
+# used an extended terminfo format to describe key sequences, special
+# highlighting modes, etc.) 
+# 
+# KEYS: This means that ncurses would quite painful on the UNIX PC, since
+# there are two sequences for every key-modifier combination (local keyboard
+# sequence and remote "VT100" sequence.) But I doubt many people are trying
+# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
+# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume) 
+# seem to have been built from the manual describing the VT100 sequences. 
+# This means it doesn't work for a real live UNIX PC. 
+# 
+# FONTS: The UNIX PC also has a strange interpretation of "alternate
+# character set". Rather than the VT100 graphics you might expect, it allows
+# up to 8 custom fonts to be loaded at any given time. This means that
+# programs expecting VT100 graphics will usually be disappointed. For this
+# reason I have disabled the smacs/rmacs sequences, but they could easily be
+# re-enabled. Here are the relevant control sequences (from the ESCAPE(7) 
+# manpage), should you wish to do so: 
+# 
+# SGR10 - Select font 0 - ESC [ 10 m or SO
+# SGR11 - Select font 1 - ESC [ 11 m or SI
+# SGR12 - Select font 2 - ESC [ 12 m
+# ... (etc.)
+# SGR17 - Select font 7 - ESC [ 17 m
+# 
+# Graphics for line drawing are not reliably found at *any* character
+# location because the UNIX PC has dynamically reloadable fonts. I use font
+# 0 for regular text and font 1 for italics, but this is by no means
+# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
+# 
+# MISC: The cursor visible/cursor invisible sequences were swapped in the
+# distributed terminfo.
+# 
+# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
+# the UNIX PC terminfo entry. The modified version works great with Lynx,
+# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
+# attached by serial cable. In Emacs, even the Undo key works, and many
+# applications can now use the F1-F8 keys. 
+# 
+# esr's notes:
+#	Terminfo entry for the AT&T Unix PC 7300
+#	from escape(7) in Unix PC 7300 Manual.
+#	Somewhat similar to a vt100-am (but different enough
+#	to redo this from scratch.)
+#
+#	/***************************************************************
+#	*
+#	*           FONT LOADING PROGRAM FOR THE UNIX PC
+#	*
+#	*     This routine loads a font defined in the file ALTFONT
+#	*     into font memory slot #1.  Once the font has been loaded,
+#	*     it can be used as an alternative character set.
+#	*
+#	*     The call to ioctl with the argument WIOCLFONT is the key 
+#	*     to this routine.  For more information, see window(7) in 
+#	*     the PC 7300 documentation.
+#	***************************************************************/
+#	#include <string.h>		/* needed for strcpy call */
+#	#include <sys/window.h>         /* needed for ioctl call */
+#	#define FNSIZE	60		/* font name size */
+#	#define ALTFONT  "/usr/lib/wfont/special.8.ft"  /* font file */
+#	/*
+#	*     The file /usr/lib/wfont/special.8.ft comes with the
+#	*     standard PC software.  It defines a graphics character set
+#	*     similar to that of the Teletype 5425 terminal.  To view
+#	*     this or other fonts in /usr/lib/wfont, use the command
+#	*     cfont <filename>.  For further information on fonts see
+#	*     cfont(1) in the PC 7300 documentation.
+#	*/
+#	
+#	struct altfdata 	/* structure for alt font data */
+#	{
+#	short	altf_slot;		/* memory slot number */
+#	char	altf_name[FNSIZE];	/* font name (file name) */
+#	};
+#	ldfont()
+#	{
+#		int wd;		/* window in which altfont will be */
+#		struct altfdata altf;
+#		altf.altf_slot=1;
+#		strcpy(altf.altf_name,ALTFONT);
+#		for (wd =1; wd < 12; wd++) {
+#		     ioctl(wd, WIOCLFONT,&altf);
+#	        }
+#	}
+#
+# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
+# they're confirmed by the man page for the System V display---esr)
+#
+att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300, 
+	am, xon, 
+	cols#80, it#8, lines#24, 
+	bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C, 
+	clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, 
+	cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 
+	cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 
+	ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL, 
+	il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB, 
+	kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, 
+	kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM, 
+	kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, 
+	kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, 
+	kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z, 
+	kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, 
+	ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd, 
+	kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 
+	kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B, 
+	kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv, 
+	kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, 
+	kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB, 
+	ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM, 
+	rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m, 
+	smul=\E[4m, 
+
+#### Hewlett-Packard consoles
+#
+# These are descriptions for the HP700 series, the workstations formerly
+# known as Apollos.  HP terminals are described elsewhere in the file
+#
+
+# From: Victor Duchovni <vic@fine.princeton.edu>
+# (hp700-wy: removed obsolete ":nl=^J:";
+# replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
+hp700-wy|HP700/41 emulating wyse30, 
+	am, bw, mir, msgr, OTbs,
+	cols#80, it#8, lines#24, xmc#1, 
+	cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, 
+	cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	dch1=\EW, dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=\t,
+	hts=\E1, if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
+	is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI, 
+	kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
+	kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K, ri=\Ej,
+	rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>, sgr0=\EG0$<10/>, smir=\Eq, 
+	smso=\EG4$<10/>, smul=\EG8$<10/>, tbc=\E0,
+	vpa=\E[%p1%{32}%+%c, 
+# (hp70092: added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
+hp70092|hp70092a|hp70092A|HP 700/92,
+	am, da, db, xhp,
+	cols#80, lines#24, lh#2, lm#0, lw#8, nlab#8,
+	acsc=, bel=^G, blink=\E&dA, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ,
+	cr=\r, cub1=\b, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
+	cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC,
+	ht=\t, hts=\E1, il1=\EL, kbs=\b, kclr=\EJ, kctab=\E2, kcub1=\ED,
+	kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ,
+	kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
+	kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
+	kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3,
+	.pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
+	.pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
+	.pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
+	.pln=\E&f%p1%dk%p2%l%dd0L%p2%s,
+	rev=\E&dB, ri=\ET,
+	rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, 
+	rmul=\E&d@, sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A,
+	smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+
+#  HP 700/44 Setup parameters:  
+# Terminal Mode		HP-PCterm
+# Inhibit Auto Wrap	NO
+# Status Line		Host Writable
+# PC Character Set	YES
+# Twenty-Five Line Mode	YES
+# XON/XOFF		@128 or 64 (sc)
+# Keycode Mode 		NO   or YES (sc)
+# Backspace Key		BS or BS/DEL
+#
+# <is2> 	sets pcterm; autowrap; 25 lines; pc char set; prog DEL key; 
+# \E\\? does not turn off keycode mode
+# <smsc>	sets alternate start/stop; keycode on
+hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
+	am, eo, xenl, xon,
+	cols#80, lines#25,
+	bel=^G, clear=\E[2J\E[H, 
+	civis=\E[?25l, cnorm=\E[?25h, 
+	cup=\E[%i%p1%d;%p2%dH,
+	cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, 
+	cr=\r, ind=\n,
+	home=\E[H, ht=\t, cbt=\E[Z,
+	dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, 
+	ed=\E[J, el=\E[K,
+	is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\, 
+	kbs=\b, kcbt=\E[Z, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	khome=\E[1~, kend=\E[4~, knp=\E[6~, kpp=\E[5~, 
+	kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, 
+	kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 
+	kf9=\E[26~, kf10=\E[28~,
+	acsc=k\277l\332m\300j\331n\305w\302q\304u\264t\303v\301x\263,
+	rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
+	smso=\E[7m, smul=\E[4m,
+	smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>,
+	rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\,
+	xonc=\145, xoffc=\147,
+
+#### Iris consoles
+#
+
+# From: Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997
+# (iris-ansi: added rmam/smam based on init string -- esr)
+iris-ansi|IRIS emulating 40 line ANSI terminal (almost VT100),
+	am,
+	cols#80, it#8, lines#40,
+	bel=^G, bold=\E[1m, clear=\E[H\E[2J,
+	cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD,
+	cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+	cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+	home=\E[H, ht=\t, hts=\EH, il=\E[%p1%dL, il1=\E[L,
+	ind=\ED, is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8,
+	kDC=\E[P, kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q,
+	kPRT=\E[210q, kRIT=\E[167q, kSPD=\E[218q, kbs=\b,
+	kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+	kcuu1=\E[A, kdch1=^?, kend=\E[146q, kent=\r,
+	kf1=\E[001q, kf10=\EOQ, kf11=\EOR, kf12=\EOS,
+	kf2=\E[002q, kf3=\E[003q, kf4=\E[004q, kf5=\E[005q,
+	kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, kf9=\EOP,
+	khome=\E[H, kich1=\E[139q, knp=\E[154q, kpp=\E[150q,
+	kprt=\E[209q, krmir=\E[146q, kspd=\E[217q, nel=\EE,
+	pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8, rev=\E[7m,
+	ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
+	smam=\E[?7h, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
+iris-ansi-ap|IRIS ANSI in application-keypad mode,
+	is2=\E[?1l\E>\E[?7h, 
+	rmkx=\E>, smkx=\E=, kf10=\E[010q, kf11=\E[011q, kf12=\E[012q,
+	use=iris-ansi, 
+
+# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
+# (T.Dickey 98/1/24)
+iris-color|xwsh|IRIX ANSI with color, 
+	ncv#33, 
+	csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m, 
+	ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m, 
+	rmul=\E[24m, rs1=\Ec, 
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
+	sitm=\E[3m, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 
+	use=klone+color, use=iris-ansi-ap, 
+
+# (wsiris: this had extension capabilities
+#	:HS=\E7F2:HE=\E7F7:\
+#	:CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
+# See the note on Iris extensions near the end of this file.  
+# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> & 
+# <flash> from BRL -- esr)
+wsiris|iris40|iris emulating a 40 line visual 50 (approximately), 
+	OTbs, OTnc, OTpt, am, 
+	OTkn#3, cols#80, it#8, lines#40, 
+	OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
+	cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E;,
+	dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK, flash=\E7F4\E7B1\013\E7F7\E7B0,
+	home=\EH, ht=\t, il1=\EL, ind=^J, is2=\E7B0\E7F7\E7C2\E7R3,
+	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1,
+	kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
+	kf9=\E9, ri=\EI, rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
+	smul=\E7R2\E9P,
+
+#### NeWS consoles
+#
+# Console terminal windows under the NeWS (Sun's Display Postscript windowing
+# environment).   Note: these have nothing to do with Sony's News workstation
+# line.
+#
+
+# Entry for NeWS's psterm from Eric Messick & Hugh Daniel
+# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
+psterm|psterm-basic|NeWS psterm-80x34, 
+	OTbs, am, hs, km, ul, 
+	cols#80, it#8, lines#34, 
+	blink=\EOb, bold=\EOd, clear=^L, 
+	csr=\EE%p1%d;%p2%d;, cub1=\ET, cud1=\EP, cuf1=\EV, 
+	cup=\E%p1%d;%p2%d;, cuu1=\EY, dch1=\EF, dl1=\EK, 
+	ed=\EB, el=\EC, flash=\EZ, fsl=\ENl, home=\ER, ht=\t, 
+	il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr, 
+	ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, 
+	rmul=\ENu, sc=^], sgr0=\EN*, smcup=\EOt, smir=\EOi, 
+	smso=\EOo, smul=\EOu, tsl=\EOl, 
+psterm-96x48|NeWS psterm 96x48, 
+	cols#96, lines#48, 
+	use=psterm,
+psterm-90x28|NeWS psterm 90x28, 
+	cols#90, lines#28, 
+	use=psterm,
+psterm-80x24|NeWS psterm 80x24, 
+	cols#80, lines#24, 
+	use=psterm,
+# This is a faster termcap for psterm.  Warning:  if you use this termcap,
+# some control characters you type will do strange things to the screen.
+# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
+psterm-fast|NeWS psterm fast version (flaky ctrl chars), 
+	OTbs, am, hs, km, ul, 
+	cols#80, it#8, lines#34, 
+	blink=^Ob, bold=^Od, clear=^L, 
+	csr=\005%p1%d;%p2%d;, cub1=^T, cud1=^P, cuf1=^V, 
+	cup=\004%p1%d;%p2%d;, cuu1=^Y, dch1=^F, dl1=^K, 
+	ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=\t, il1=^A, 
+	ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, 
+	ri=^X, rmcup=^Nt, rmir=^Ni, rmso=^No, rmul=^Nu, 
+	sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi, smso=^Oo, 
+	smul=^Ou, tsl=^Ol, 
+
+#### NeXT consoles
+#
+# Use `glasstty' for the Workspace application
+#
+
+# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
+next|NeXT console, 
+	am, xt, 
+	cols#80, it#8, lines#24, 
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, 
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 
+	el=\E[K, home=\E[H, ht=^I, ind=^J, kbs=^H, 
+	kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E[4;1m, 
+	sgr0=\E[m, smso=\E[4;2m, 
+nextshell|NeXT Shell application, 
+	am, 
+	cols#80, 
+	bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, 
+	kcub1=^H, kcud1=^J, nel=^M^J, 
+
+#### SCO consoles
+#
+
+# SCO console and SOS-Syscons console for 386bsd
+# (scoansi: had unknown capabilities
+#	:Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
+#	:GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
+#	:G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
+#	:CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
+#	:WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
+# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
+# on the <smacs>=\E[12m  -- esr)
+scoansi|SCO Extended ANSI standard crt, 
+	OTbs, am, eo, xon,
+	cols#80, it#8, lines#25, 
+	blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, 
+	cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, 
+	home=\E[H, ht=\t, ich1=\E[@, il1=\E[L, ind=\E[S, kbs=^H, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
+	kf1=\E[M, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, 
+	kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, kf10=\E[V, khome=\E[H,
+	knp=\E[G, kpp=\E[I, ri=\E[T, 
+	use=klone+sgr-dumb,
+
+#### Sun consoles
+#
+
+# :is1: resets scrolling region in case a previous user had used "tset vt100"
+oldsun|Sun Microsystems Workstation console, 
+	am, km, mir, msgr, OTbs,
+	cols#80, it#8, lines#34, 
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 
+	dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
+	el=\E[K, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 
+	il1=\E[L, ind=^J, is1=\E[1r, kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, 
+	kf3=\EOR, kf4=\EOS, khome=\E[H, rmso=\E[m, 
+	sgr0=\E[m, smso=\E[7m, 
+# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
+# <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
+# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
+sun-il|Sun Microsystems console with working insert-line, 
+	am, km, msgr, 
+	cols#80, lines#34, 
+	bel=^G, bold@, clear=^L, cr=^M, cub1=^H,
+	cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 
+	dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, ich=\E[%p1%d@, 
+	ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 
+	kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[220z, 
+	kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, 
+	kf12=\E[235z, kf2=\E[225z, kf3=\E[226z, 
+	kf4=\E[227z, kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, 
+	kf8=\E[231z, kf9=\E[232z, khome=\E[214z, 
+	knp=\E[222z, kopt=\E[194z, kpp=\E[216z, 
+	kres=\E[193z, kund=\E[195z, rev=\E[7m, 
+	rmso=\E[m, rmul@, rs2=\E[s, 
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 
+	sgr0=\E[m, smso=\E[7m, smul@, u8=\E[1t, u9=\E[11t,
+# On a SparcStation 5, <il1>/<il> flake out on the last line.
+# Unfortunately, without them the terminal has no way to scroll.
+sun-ss5|Sun SparcStation 5 console,
+	il1@, il@, use=sun-il,
+# If you are using an SS5, change the sun definition to use sun-ss5.
+sun|sun1|sun2|Sun Microsystems Inc. workstation console, 
+	use=sun-il,
+
+# From: <john@ucbrenoir>  Tue Sep 24 13:14:44 1985
+sun-s|Sun Microsystems Workstation window with status line, 
+	hs,
+	dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, 
+	use=sun,
+sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs, 
+	hs, 
+	dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
+sun-48|Sun 48-line window, 
+	cols#80, lines#48, 
+	use=sun,
+sun-34|Sun 34-line window, 
+	cols#80, lines#34, 
+	use=sun,
+sun-24|Sun 24-line window, 
+	cols#80, lines#24, 
+	use=sun,
+sun-17|Sun 17-line window, 
+	cols#80, lines#17, 
+	use=sun,
+sun-12|Sun 12-line window, 
+	cols#80, lines#12, 
+	use=sun,
+sun-1|Sun 1-line window for sysline, 
+	eslok, hs, 
+	cols#80, lines#1, 
+	dsl=^L, fsl=\E[K, tsl=^M, use=sun,
+sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character, 
+	ich1@, rmir@, smir@, use=sun,
+sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history, 
+	lines#35, rmcup=\E[>4h, smcup=\E[>4l, use=sun,
+
+#### Common Desktop Environment
+#
+
+# This ships with Sun's CDE in Solaris 2.5
+# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
+dtterm|CDE desktop terminal, 
+	am, mir, msgr, xenl, xon, 
+	colors#8, cols#80, it#8, lines#24, lm#0, pairs#64, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
+	clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 
+	dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 
+	flash=\E[?5h$<200>\E[?5l, home=\E[H, ht=^I, hts=\EH, 
+	ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 
+	invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l, kbs=^H, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 
+	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 
+	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 
+	kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 
+	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
+	kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 
+	kslt=\E[4~, nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, 
+	rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, 
+	rmul=\E[24m, sc=\E7, setab=\E[%p1%{40}%+%dm, 
+	setaf=\E[%p1%{30}%+%dm, 
+	sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 
+	sgr0=\E[m^O, smacs=^N, smam=\E[?7h, smir=\E[4h, 
+	smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, 
+
+######## UNIX VIRTUAL TERMINALS AND TELNET CLIENTS
+#
+
+#### FSF virtual terminal types
+#
+
+# The codes supported by the term.el terminal emulation in GNU Emacs 19.30 
+eterm|gnu emacs term.el terminal emulation, 
+	am, mir, xenl, 
+	cols#80, lines#24, 
+	bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
+	ed=\\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, 
+	ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 
+	rev=\E[7m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 
+	rmso=\E[m, rmul=\E[m, sgr0=\E[m, smcup=\E7\E[?47h, 
+	smir=\E[4h, smso=\E[7m, smul=\E[4m, 
+
+# Entries for use by the FSF's `screen' program.  The screen and
+# screen-w entries came with version 3.7.1.  The screen2 and screen3 entries
+# come from University of Wisconsin and may be older.
+# (screen: added <cnorm> on ANSI model -- esr)
+
+screen|VT 100/ANSI X3.64 virtual terminal,
+	am, km, mir, msgr, xenl,
+	colors#8, cols#80, it#8, lines#24, pairs#64,
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+	cnorm=\E[?25h, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n,
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P,
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, enacs=\E(B\E)0, flash=\Eg, home=\E[H,
+	ht=\t, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+	ind=\n, is2=\E)0, kbs=\b, kcub1=\EOD, kcud1=\EOB,
+	kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\EOP,
+	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ,
+	kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~,
+	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[1~,
+	kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=\EE,
+	rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>,
+	rmso=\E[23m, rmul=\E[24m, rs2=\Ec, sc=\E7, sgr0=\E[m,
+	smir=\E[4h, smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m,
+	tbc=\E[3g, smacs=^N, rmacs=^O,
+	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~..--++\054\054hh00,
+	use=ecma+color,
+
+screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
+	cols#132,
+	use=screen, 
+
+screen2|old VT 100/ANSI X3.64 virtual terminal, 
+	cols#80, it#8, lines#24, 
+	cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, 
+	cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 
+	cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 
+	dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, hts=\EH, 
+	ich=\E[%p1%d@, ich1=, il=\E[%p1%dL, il1=\E[L, 
+	ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 
+	kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, 
+	kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, 
+	kf9=\E0I, khome=\EH, nel=^M^J, rc=\E8, ri=\EM, 
+	rmir=\E[4l, rmso=\E[23m, rmul=\E[24m, rs1=\Ec, 
+	sc=\E7, sgr0=\E[m, smir=\E[4h, smso=\E[3m, smul=\E[4m, 
+	tbc=\E[3g, 
+# (screen3: removed unknown ":xv:LP:G0:" -- esr)
+screen3|older VT 100/ANSI X3.64 virtual terminal, 
+	km, mir, msgr, 
+	cols#80, it#8, lines#24, 
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 
+	clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, 
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 
+	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 
+	il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, 
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, 
+	rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E>, 
+	rmso=\E[23m, rmul=\E[24m, rs1=\Ec, sc=\E7, 
+	sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m, 
+	smul=\E[4m, tbc=\E[3g, 
+
+#### Pilot Pro Palm-Top
+#
+
+# From: Jason Downs <downsj@downsj.com>, 15 Jun 1997 (Top Gun Telnet's author)
+pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional, 
+	am, xenl, 
+	cols#39, lines#16, 
+	bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J, 
+	cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I, 
+	ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, 
+	nel=\Em~\s, rmso=\EB, smso=\Eb, 
+
+######## NON-UNIX CONSOLES
+#
+
+#### MGR
+#
+# MGR is a Bell Labs window system lighter-weight than X.
+# These entries describe MGR's xterm-equivalent. 
+# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997 
+#
+
+mgr|Bellcore MGR (non X) window system terminal emulation,
+	am, km, csr=\E%p1%d;%p2%dt, clear=\f, el=\Ec, ed=\EC,
+	cup=\E%p2%d;%p1%dM, cud1=\Ef, cub1=\b, cuf1=\Er, cuu1=\Eu,
+	cvvis=\E0h, civis=\E9h, cnorm=\Eh,
+	dch1=\EE, dl1=\Ed$<3>, dch=\E%p1%dE$<5>, dl=\E%p1%dd$<3*>,
+	ich1=\EA, il1=\Ea$<3>, ich=\E%p1%dA$<5>, il=\E%p1%da$<3*>,
+	rmam=\E5S, smam=\E5s, bold=\E2n, rev=\E1n, sgr0=\E0n,
+	smso=\E1n, rmso=\E0n, smul=\E4n, rmul=\E0n, hu=\E1;2u, hd=\E1;2f, 
+	kbs=\b, kcud1=\E[B, kcub1=\E[D, kcuf1=\E[C, kcuu1=\E[A,
+	nel=\r\n, cr=\r, ind=\n, ht=\t, bel=^G, 
+mgr-sun|Mgr window with Sun keyboard,
+	kf1=\E[224z, kf2=\E[225z, kf3=\E[226z, kf4=\E[227z,
+	kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
+	kf9=\E[232z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
+	khome=\E[214z, knp=\E[222z, kpp=\E[216z, 
+	kcpy=\E197z, kend=\E[220z, kent=\E[250z, kfnd=\E[200z,
+	khlp=\E[207z, kopn=\E[198z, kund=\E[195z,
+	ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z, kc3=\E[222z,
+	use=mgr,
+mgr-linux|Mgr window with Linux keyboard,
+	ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~, kdch1=\E[3~,
+	kf0=\E[[J, kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
+	kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+	khome=\E[1~, knp=\E[6~, kpp=\E[5~, kend=\E[4~,
+	use=mgr,
+
+#### BeOS
+#
+# BeOS entry for Terminal program Seems to be almost ANSI
+beterm|BeOS Terminal, 
+	am, eo, mir, msgr, xenl, xon, 
+	colors#8, cols#80, it#8, lines#25, pairs#64, 
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
+	clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 
+	dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
+	el=\E[K, flash=\E[?5h\E[?5l$<200/>, home=\E[H, 
+	hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 
+	il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G, 
+	kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~, 
+	kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, 
+	kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~, 
+	khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, 
+	nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, 
+	rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7, setab=\E[4%p1%dm, 
+	setaf=\E[3%p1%dm, setb=\E[%p1%'('%+%cm, 
+	setf=\E[%p1%{30}%+%cm, sgr0=\E[0;10m, smir=\E[4h, 
+	smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, 
+	u7=\E[6n, u8=\E[?6c, u9=\E[c, vpa=\E[%i%p1%dd, 
+
+#### QNX
+#
+
+# QNX 4.0 Console
+# Michael's original version of this entry had <am@>, <smcup=\Ei>,
+# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
+# right corner without triggering a scroll.  The ncurses terminfo library can
+# handle this case with the <ich1> capability, and prefers <am> for better
+# optimization.  Bug: The <op> capability resets attributes.
+# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
+# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
+qnx|qnx4|qnx console,
+	km, mir, msgr, xt,
+	cols#80, it#4, lines#25, colors#8, pairs#8, ncv#3,
+	daisy, xhpa, mvpa=\E!%p1%02d,
+	bel=^g, cr=\r, clear=\EH\EJ, el=\EK, ed=\EJ,
+	cup=\EY%p1%' '%+%c%p2%' '%+%c, cud1=\l, home=\EH,
+	civis=\Ey0, cub1=\b, cnorm=\Ey1, cuf1=\EC, cuu1=\EA,
+	cvvis=\Ey2, dch1=\Ef, dl1=\EF, blink=\E{, bold=\E<,
+	smcup=\Ei, rev=\E(, smso=\E(, smul=\E[, sgr0=\E}\E]\E>\E),
+	rmcup=\Eh\ER, rmso=\E), rmul=\E], ich1=\Ee, il1=\EE,
+	rep=\Eg%p2%' '%+%c%p1%c, rs1=\ER, ind=\l, ri=\EI, ht=\t,
+	acsc=l\332m\300k\277j\331q\304x\263u\264t\303n\305v\301w\302O\333a\261o\337s\334,
+	op=\ER, .scp=\E@%p1%02d,
+	setf=\E@%p1%Pf%gb%gf%d%d,
+	setb=\E@%p1%Pb%gb%gf%d%d,
+	ktbc=\377\344, kclr=\377\341, kctab=\377\237,
+	kdch1=\377\254, kdl1=\377\274, kcud1=\377\251,
+	krmir=\377\313, kel=\377\310, ked=\377\314, kcuu1=\377\241,
+	kf1=\377\201, kf10=\377\212, kf2=\377\202, kf3=\377\203,
+	kf4=\377\204, kf5=\377\205, kf6=\377\206, kf7=\377\207,
+	kf8=\377\210, kf9=\377\211, khome=\377\240, kich1=\377\253,
+	kil1=\377\273, kcub1=\377\244, knp=\377\252, kpp=\377\242,
+	kcuf1=\377\246, kind=\377\261, kri=\377\271, khts=\377\342,
+	kcbt=\377\0, kbeg=\377\300, kcan=\377\243, kclo=\377\343,
+	kcmd=\377\245, kcpy=\377\265, kcrt=\377\305, kend=\377\250,
+	kent=\377\320, kext=\377\270, kfnd=\377\346, khlp=\377\350,
+	kmrk=\377\355, kmsg=\377\345, kmov=\377\351, knxt=\377\312,
+	kopn=\377\357, kopt=\377\353, kprv=\377\302, kprt=\377\255,
+	krdo=\377\336, kref=\377\354, krfr=\377\347, krpl=\377\362,
+	krst=\377\352, kres=\377\360, ksav=\377\361, kund=\377\365,
+	kBEG=\377\356, kCAN=\377\263, kCMD=\377\267, kCPY=\377\363,
+	kCRT=\377\364, kDL=\377\366,  kslt=\377\247, kEND=\377\301,
+	kEOL=\377\311, kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
+	kHOM=\377\260, kIC=\377\340,  kLFT=\377\264, kMSG=\377\304,
+	kMOV=\377\306, kNXT=\377\272, kOPT=\377\372, kPRV=\377\262,
+	kPRT=\377\275, kRDO=\377\315, kRIT=\377\266, kSAV=\377\307,
+	kUND=\377\337, kRPL=\377\373, kRES=\377\374, kspd=\377\335,
+	kSPD=\377\303, kf11=\377\256, kf12=\377\257, kf13=\377\213,
+	kf14=\377\214, kf15=\377\215, kf16=\377\216, kf17=\377\217,
+	kf18=\377\220, kf19=\377\221, kf20=\377\222, kf21=\377\223,
+	kf22=\377\224, kf23=\377\333, kf24=\377\334, kf25=\377\225,
+	kf26=\377\226, kf27=\377\227, kf28=\377\230, kf29=\377\231,
+	kf30=\377\232, kf31=\377\233, kf32=\377\234, kf33=\377\235,
+	kf34=\377\236, kf35=\377\276, kf36=\377\277, kf37=\377\321,
+	kf38=\377\322, kf39=\377\323, kf40=\377\324, kf41=\377\325,
+	kf42=\377\326, kf43=\377\327, kf44=\377\330, kf45=\377\331,
+	kf46=\377\332, kf47=\377\316, kf48=\377\317,
+# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
+# (esr: commented out <scp> and <rmcup> to avoid warnings.)
+qnxt2|qnx 2.15 serial terminal,
+	am, daisy, km, mir, msgr, xhpa, xt, 
+	colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8, 
+	acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263, 
+	bel=^G, blink=\E{, bold=\E<, clear=\EH\EJ, cr=^M, cub1=^H, 
+	cud1=^J, cuf1=\EC, cup=\EY%p1%' '%+%c%p2%' '%+%c, 
+	cuu1=\EA, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EE, 
+	ind=^J, kBEG=\377\356, kCAN=\377\263, kCMD=\377\267, 
+	kCPY=\377\363, kCRT=\377\364, kDL=\377\366, 
+	kEND=\377\301, kEOL=\377\311, kEXT=\377\367, 
+	kFND=\377\370, kHLP=\377\371, kHOM=\377\260, 
+	kIC=\377\340, kLFT=\377\264, kMOV=\377\306, 
+	kMSG=\377\304, kNXT=\377\272, kOPT=\377\372, 
+	kPRT=\377\275, kPRV=\377\262, kRDO=\377\315, 
+	kRIT=\377\266, kSAV=\377\307, kSPD=\377\303, 
+	kbeg=\377\300, kcan=\377\243, kcbt=\377\0, kclo=\377\343, 
+	kclr=\377\341, kcmd=\377\245, kcpy=\377\265, 
+	kcrt=\377\305, kctab=\377\237, kcub1=\377\244, 
+	kcud1=\377\251, kcuf1=\377\246, kcuu1=\377\241, 
+	kdch1=\377\254, kdl1=\377\274, ked=\377\314, 
+	kel=\377\310, kend=\377\250, kent=\377\320, 
+	kext=\377\270, kf1=\377\201, kf10=\377\212, 
+	kf11=\377\256, kf12=\377\257, kf13=\377\213, 
+	kf14=\377\214, kf15=\377\215, kf16=\377\216, 
+	kf17=\377\217, kf18=\377\220, kf19=\377\221, 
+	kf2=\377\202, kf20=\377\222, kf21=\377\223, 
+	kf22=\377\224, kf23=\377\333, kf24=\377\334, 
+	kf25=\377\225, kf26=\377\226, kf27=\377\227, 
+	kf28=\377\230, kf29=\377\231, kf3=\377\203, 
+	kf30=\377\232, kf31=\377\233, kf32=\377\234, 
+	kf33=\377\235, kf34=\377\236, kf35=\377\276, 
+	kf36=\377\277, kf37=\377\321, kf38=\377\322, 
+	kf39=\377\323, kf4=\377\204, kf40=\377\324, 
+	kf41=\377\325, kf42=\377\326, kf43=\377\327, 
+	kf44=\377\330, kf45=\377\331, kf46=\377\332, 
+	kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206, 
+	kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346, 
+	khlp=\377\350, khome=\377\240, khts=\377\342, 
+	kich1=\377\253, kil1=\377\273, kind=\377\261, 
+	kmov=\377\351, kmrk=\377\355, kmsg=\377\345, 
+	knp=\377\252, knxt=\377\312, kopn=\377\357, 
+	kopt=\377\353, kpp=\377\242, kprt=\377\255, 
+	kprv=\377\302, krdo=\377\336, kref=\377\354, 
+	kres=\377\360, krfr=\377\347, kri=\377\271, 
+	krmir=\377\313, krpl=\377\362, krst=\377\352, 
+	ksav=\377\361, kslt=\377\247, ktbc=\377\344, 
+	kund=\377\365, mvpa=\E!%p1%02d, op=\ER, rev=\E(, ri=\EI, 
+	.rmcup=\ER, rmso=\E>, rmul=\E], rs1=\ER, .scp=\E@%p1%02d, 
+	sgr0=\E}\E]\E>\E), smso=\E<, smul=\E[, 
+
+#### DOS ANSI.SYS variants
+#
+# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
+# documentation (except for the keyboard key reassignment feature, which
+# doen't fit the <pfkey> model well).  The klone+acs sequences were valid
+# though undocumented.  The <pfkey> capability is untested but should work for
+# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
+# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
+ansi.sys-old|ANSI.SYS under PC-DOS 2.1, 
+	OTbs, am, mir, msgr, xon,
+	cols#80, lines#25, 
+	clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+	el=\E[k, home=\E[H, is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L,
+	kcuu1=^K, khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s",
+	rc=\E[u, rmam=\E[?7l, sc=\E[s, smam=\E[?7h,
+	u6=\E[%i%d;%dR, u7=\E[6n,
+	use=klone+color, use=klone+sgr, 
+ansi.sys|ANSI.SYS 3.1 and later versions,
+	el=\E[K, use=ansi.sys-old,
+
+#
+# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
+# This should only be used when the terminal emulator cannot redefine the keys.
+# Since redefining keys with ansi.sys also affects PC-DOS programs, the key
+# definitions must be restored.  If the terminal emulator is quit while in vi
+# or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
+# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
+# (^U and ^D are already defined for tn3270).  The ESC is safe for vi but it
+# does "beep".  ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
+# Note that <kcub1> is always BS, because PC-dos can tolerate this change.
+# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
+# Consequently the End keypad key could not be set (it is relatively safe and
+# actually useful because it sends ^@ O, which beeps and opens a line above).
+ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi, 
+	is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, 
+	rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p, 
+	smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p, use=ansi.sys,
+#
+# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
+nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS, 
+	dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 
+	is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n, use=ansi.sys,
+#
+# See ansi.sysk and nansi.sys above.
+nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi, 
+	dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 
+	is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, use=ansi.sysk,
+
+#### OS/2
+#
+
+# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
+# a Unix-style environment used on OS/2.  (Note that the suffix makes some
+# names longer than 14 characters, the nominal maximum).
+#
+# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
+ansi-emx|ANSI.SYS color, 
+	am, bce, eo, mir, msgr, xenl, xon, 
+	colors#16, cols#80, it#8, lines#25, pairs#64, 
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
+	clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, 
+	cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 
+	dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, 
+	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J, 
+	kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, 
+	kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, kf5=\0?, kf6=\0@, 
+	kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, kll=\0O, 
+	knp=\0Q, kpp=\0I, kspd=^Z, nel=^M^J, rev=\E[5;37;41m, 
+	rmir=\E[4l, rmpch=\E[10m, rmso=\E[0;44m\E[1;33m, 
+	rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm, 
+	setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h, 
+	smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m, 
+	tbc=\E[3g, u8=\E[?6c, u9=\E[c, 
+ansi-color-2-emx|ANSI.SYS color 2, 
+	am, bce, eo, mir, msgr, xenl, xon, 
+	colors#16, cols#80, it#8, lines#25, pairs#64, 
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
+	clear=\E[0;37;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, 
+	cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 
+	dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, 
+	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J, 
+	kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, 
+	kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, kf5=\0?, kf6=\0@, 
+	kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, kll=\0O, 
+	knp=\0Q, kpp=\0I, kspd=^Z, nel=^M^J, rev=\E[1;37;46m, 
+	rmir=\E[4l, rmpch=\E[10m, rmso=\E[0;37;44m, 
+	rmul=\E[0;37;44m, rs1=\Ec, setab=\E[4%p1%dm, 
+	setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smir=\E[4h, 
+	smpch=\E[11m, smso=\E[1;37;46m, smul=\E[1;36;44m, 
+	tbc=\E[3g, u8=\E[?6c, u9=\E[c, 
+ansi-color-3-emx|ANSI.SYS color 3, 
+	am, bce, eo, mir, msgr, xenl, xon, 
+	colors#16, cols#80, it#8, lines#25, pairs#64, 
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
+	clear=\E[0;37;40m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, 
+	cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 
+	dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, 
+	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J, 
+	kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, 
+	kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, kf5=\0?, kf6=\0@, 
+	kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, kll=\0O, 
+	knp=\0Q, kpp=\0I, kspd=^Z, nel=^M^J, rev=\E[1;37;46m, 
+	rmir=\E[4l, rmpch=\E[10m, rmso=\E[0;37;40m, 
+	rmul=\E[0;37;40m, rs1=\Ec, setab=\E[4%p1%dm, 
+	setaf=\E[3%p1%dm, sgr0=\E[0;10m, smir=\E[4h, 
+	smpch=\E[11m, smso=\E[1;37;46m, smul=\E[0;36;40m, 
+	tbc=\E[3g, u8=\E[?6c, u9=\E[c, 
+mono-emx|stupid monochrome ansi terminal with only one kind of emphasis, 
+	am, 
+	cols#80, it#8, lines#24, 
+	clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 
+	ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, 
+	kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, 
+	kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, 
+	kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m, 
+	sgr0=\E[0m, 
+
+#### Windows NT
+#
+# This entry fits the Windows NT console when the _POSIX_TERM environment
+# variable is set to 'on'.  While the Windows NT POSIX console is seldom used,
+# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
+# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
+# systems is not, and (surprise!) they match very well.
+#
+# See:  MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
+# VI POSIX Editor for Windows NT 3.1".  True to Microsoft form, not only
+# are the installation instructions a pile of mind-numbing bureaucratese,
+# but the termcap entry is actually broken and unusable as given; the :do:
+# capability is misspelled "d".
+#
+# To use this, you need to a bunch of environment variables: 
+#
+# SET _POSIX_TERM=on
+# SET TERM=ansi
+# SET TERMCAP=location of termcap file in POSIX file format
+# which is case-sensitive.
+# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
+# SET TMP=//C/TEMP
+#
+# Important note: setting the TMP environment variable in POSIX style renders
+# it incompatible with a lot of other applications, including Visual C++. So
+# you should have a separate command window just for vi. All the other
+# variables may be permanently set in the Control Panel\System applet. 
+#
+# You can find out more about the restrictions of this facility at
+# <http://www.nentug.org/unix-to-nt/ntposix.htm>.
+#
+# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
+ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode, 
+	am, bw, msgr, 
+	cols#80, it#8, lines#25, 
+	bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 
+	home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V, 
+	kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m, 
+	ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m, 
+
+######## COMMON TERMINAL TYPES
+#
+# This section describes terminal classes and maker brands that are still
+# quite common, but have proprietary command sets not blessed by ANSI.
+#
+
+#### Lear-Siegler (adm)
+#
+# These guys are long since out of the terminals business, but
+# in 1995 many current terminals still have an adm type as one of their
+# emulations (usually their stupidest, and usually labeled adm3, though
+# these `adm3' emulations normally have adm3a+ capabilities).
+#
+# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a 
+# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
+# was being held to ground would trigger a send of the top line on the screen.
+# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
+# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
+# for clearing up this point.)
+#
+
+adm1a|adm1|lsi adm1a,
+	cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H,
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, clear=\E;$<1>,
+	cols#80, home=^^, lines#24, cuf1=^L, cuu1=^K,
+adm2|lsi adm2, 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, 
+	il1=\EE, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 
+	khome=^^, 
+# (adm3: removed obsolete ":ma=^K^P:" -- esr)
+adm3|lsi adm3, 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J, 
+# The following ADM-3A switch settings are assumed for normal operation:
+#	SPACE		U/L_DISP	CLR_SCRN	24_LINE
+#	CUR_CTL		LC_EN		AUTO_NL		FDX
+# Other switches may be set for operator convenience or communication
+# requirements.  I recommend
+#	DISABLE_KB_LOCK	LOCAL_OFF	103		202_OFF
+#	ETX_OFF		EOT_OFF
+# Most of these terminals required an option ROM to support lower case display.
+# Open the case and look at the motherboard; if you see an open 24-pin DIP
+# socket, you may be out of luck.
+#
+# (adm3a: some capabilities merged in from BRl entry -- esr)
+adm3a|lsi adm3a, 
+	OTbs, am, 
+	cols#80, lines#24,
+	OTma=^K^P, OTnl=^J, OTrs=^N,  
+	bel=^G, clear=\032$<1/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^, 
+	ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rs1=^N, 
+adm3a+|adm3a plus, 
+	kbs=^H, 
+	use=adm3a,
+# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
+adm5|lsi adm5, 
+	xmc#1, 
+	bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^, 
+	rmso=\EG, smso=\EG, use=adm3a+,
+# A lot of terminals other than adm11s use these.  Wherever you see
+# use=adm+sgr with some of its capabilities disabled, try the
+# disabled ones.  They may well work but not have been documented or
+# expressed in the using entry.  We'd like to cook up an <sgr> but the
+# <rmacs>/<smacs> sequences of the using entries vary too much.
+adm+sgr|adm style highlight capabilities,
+	invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
+	smso=\EG4, smul=\EG8,
+# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
+# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
+# <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>.  <clear> could also
+# be ^Z, according to his entry.
+# (adm11: <smul>=\EG4 was obviously erroneous because it also said
+# <rev>=\EG4.  Looking at other ADMs confirms this -- esr)
+adm11|LSI ADM-11, 
+	OTbs, am, hs, 
+	OTkn#8, cols#80, lines#24, 
+	OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H, cud1=^J, 
+	cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I, kbs=^H, 
+	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf2=^AA\r, 
+	kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 
+	kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E), 
+	use=adm+sgr,
+# From: Andrew Scott Beals <bandy@lll-crg.ARPA>
+# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
+# Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
+# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :".  This formerly had
+# <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
+# via BRL.  That entry asserted <xmc#1>, but I've left that out because 
+# neither earlier nor later ADMSs have it -- esr)
+#
+# You will need to get into the supervisor setup before you can set
+# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
+# see a lot more setup options.
+# 
+# While in supervisor setup you can also use following codes:
+# 
+# Ctrl-P Personality character selections (configure for example what
+#        arrow keys send, if I recall correctly)
+# Ctrl-T tabs 1-80   use left&right to move and up to set and
+# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
+# Ctrl-B Binary setup (probably not needed. I think that everything can
+#        be set using normal setup)
+# Ctrl-A Answerback mode (enter answerback message)
+# Ctrl-U User friendly mode (normal setup)
+# Ctrl-D Defaults entire setup and function keys from EPROM tables
+# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
+# Ctrl-R Reads both setup and functions keys from NVM.
+# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
+# 
+# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
+# RTS/CTS used nowadays with virtually every modem and computer. 19200
+# bps works fine with hardware flow control.
+# 
+# The following null-modem cable should fix this and enable you to use
+# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
+# set ADM-12+ for DTR handshaking from supervisor setup.
+# 
+# PC Serial   ADM-12+
+#  --------   -------
+#         2 - 3
+#         3 - 2
+#         4 - 5
+#         5 - 20
+#       6,8 - 4
+#         7 - 7
+#        20 - 6,8
+#
+adm12|lsi adm12, 
+	OTbs, OTpt, am, mir, 
+	OTug#1, cols#80, it#8, lines#24, 
+	bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, 
+	is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1,  
+	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, 
+	kf1=^A1\r, kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, 
+	kf5=^A5\r, kf6=^A6\r, kf7=^A7\r, kf8=^A8\r, 
+	kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0, 
+	use=adm+sgr,
+# (adm20: removed obsolete ":kn#7:" -- esr)
+adm20|lear siegler adm20, 
+	am, OTbs,
+	cols#80, it#8, lines#24, 
+	bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L, 
+	cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, 
+	dch1=\EW, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=\t, 
+	ich1=\EQ, il1=\EE, kf1=^A, kf2=^B, kf3=^W, kf4=^D, 
+	kf5=^E, kf6=^X, kf7=^Z, rmso=\E(, 
+	sgr0=\E(, smso=\E), 
+adm21|lear siegler adm21,
+	xmc#1, 
+	cr=^M, cud1=^J, ind=^J, bel=^G, ed=\EY, el=\ET, il1=30*\EE,
+	dl1=30*\ER, ich1=\EQ, dch1=\EW, kbs=^H, kcub1=^H,
+	kcuf1=^L, kcuu1=^K, kcud1=^J, khome=^^, 
+	invis@, use=adm+sgr, use=adm3a,
+# (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
+# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
+# removed bogus-looking \200 from before <cup>. -- esr)
+adm22|lsi adm22, 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	dch1=\EW, dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, 
+	ich1=\EQ, il1=\EE, 
+	is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0, 
+	kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
+	kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, 
+	kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, khome=^^, lf1=F1, 
+	lf2=F2, lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, 
+	rmso=\E(, sgr0=\E(, smso=\E), 
+# ADM 31 DIP Switches
+#
+# This information comes from two versions of the manual for the
+# Lear-Siegler ADM 31.
+#
+# Main board:
+#                  rear of case
+#   +-||||-------------------------------------+
+#   + S1S2                              ||S    +
+#   +                                   ||3    +
+#   +                                          +
+#   +                                ||S       +
+#   +                                ||4       +
+#   +                                          +
+#   +                                          +
+#   +                                          +
+#   +                                          +
+#   +                                          +
+# +-+                                          +-+
+# +                                              +
+# +                               S5 S6 S7       +   
+# +                               == == ==       +
+# +----------------------------------------------+
+#            front of case (keyboard)
+#
+#  S1 - Data Rate - Modem
+#  S2 - Data Rate - Printer
+# ------------------------
+# Data Rate   Setting
+# -------------------
+# 50          0 0 0 0
+# 75          1 0 0 0
+# 110         0 1 0 0
+# 134.5       1 1 0 0
+# 150         0 0 1 0
+# 300         1 0 1 0
+# 600         0 1 1 0
+# 1200        1 1 1 0
+# 1800        0 0 0 1
+# 2000        1 0 0 1
+# 2400        0 1 0 1
+# 3600        1 1 0 1
+# 4800        0 0 1 1
+# 7200        1 0 1 1
+# 9600        0 1 1 1
+# x           1 1 1 1
+#
+# S3 - Interface/Printer/Attributes
+# ---------------------------------
+# Printer Busy Control
+# sw1   sw2   sw3
+# ---------------
+# off   off   off   Busy not active, CD disabled
+# off   off   on    Busy not active, CD enabled
+# off   on    off   Busy active on J5-20, CD disabled
+# on    off   off   Busy active on J5-19, CD disabled - Factory Set.
+# on    off   on    Busy active on J5-19, CD enabled
+#
+# sw4   Used in conjuction with S4 for comm interface control - Fact 0
+#
+# sw5   Secondary Channel Control (Hardware implementation only) - Fact 0
+#
+# sw6   ON enables printer BUSY active LOW - Factory Setting
+#       OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
+#
+# sw7   ON - steady cursor - Factory Setting
+#       OFF - blinking cursor
+#
+# sw8   ON causes selected attribute character to be displayed
+#       OFF causes SPACE to be displayed instead - Factory Setting
+#
+# S4 - Interface
+# --------------
+# Modem Interface
+# S3    S4    S4    S4    S4
+# sw4   sw1   sw2   sw3   sw4
+# ---------------------------
+# OFF   ON    OFF   ON    OFF   Enable RS-232C interface, Direct Connect and
+#                               Current Loop disabled - Factory Setting
+# ON    ON    OFF   ON    OFF   Enable Current Loop interface, Direct Connect
+#                               disabled
+# OFF   OFF   ON    OFF   ON    Enable Direct Connect interface, RS-232C and
+#                               Current Loop Disabled
+#
+# sw5   ON disables dot stretching mode - Factory Setting
+#       OFF enables dot stretching mode
+# sw6   ON enables blanking function
+#       OFF enables underline function - Factory Setting
+# sw7   ON causes NULLS to be displayed as NULLS
+#       OFF causes NULLS to be displayed as SPACES - Factory Setting
+#
+# S5 - Word Structure
+# -------------------
+# sw1   ON enables BREAK key - Factory Setting
+#       OFF disables BREAK key
+# sw2   ON selects 50Hz monitor refresh rate
+#       OFF selects 60Hz monitor refresh rate - Factory Setting
+#
+# Modem Port Selection
+# sw3   sw4   sw5
+# ---------------
+# ON    ON    ON    Selects 7 DATA bits, even parity, 2 STOP bits
+# OFF   ON    ON    Selects 7 DATA bits, odd  parity, 2 STOP bits
+# ON    OFF   ON    Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
+# OFF   OFF   ON    Selects 7 DATA bits, odd  parity, 1 STOP bit
+# ON    ON    OFF   Selects 8 DATA bits, no   parity, 2 STOP bits
+# OFF   ON    OFF   Selects 8 DATA bits, no   parity, 1 STOP bit
+# ON    OFF   OFF   Selects 8 DATA bits, even parity, 1 STOP bit
+# OFF   OFF   OFF   Selects 8 DATA bits, odd  parity, 1 STOP bit
+#
+# sw6   ON  sends bit 8 a 1 (mark)
+#       OFF sends bit 8 as 0 (space) - Factory Setting
+# sw7   ON  selects Block Mode
+#       OFF selects Conversation Mode - Factory Setting
+# sw8   ON  selects Full Duplex operation
+#       OFF selects Half Duplex operation - Factory Setting
+#
+# S6 - Printer
+# ------------
+# sw1, sw2, sw6, sw7   Reserved - Factory 0
+#
+# Printer Port Selection
+# same as Modem above, bit 8 (when 8 DATA bits) is always = 0
+#
+# sw8   ON   enables Printer Port
+#       OFF disables Printer Port - Factory Setting
+#
+# S7 - Polling Address
+# --------------------
+# sw1-7 Establish ASCII character which designates terminal polling address
+#       ON  = logic 0
+#       OFF = logic 1 - Factory Setting
+# sw8   ON   enables Polling Option
+#       OFF disables Polling Option - Factory Setting
+#
+#
+# On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
+#
+# This adm31 entry uses underline as the standout mode.
+# If the adm31 gives you trouble with standout mode, check the DIP switch in
+# position 6, bank @c11, 25% from back end of the circuit board.  Should be
+# OFF.  If there is no such switch, you have an old adm31 and must use oadm31.
+# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
+adm31|lsi adm31 with sw6 set for underline mode, 
+	am, mir, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J,
+	is2=\Eu\E0, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 
+	kf0=^A0\r, kf1=^A1\r, kf2=^A2\r, kf3=^A3\r, 
+	kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, kf7=^A7\r, 
+	kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0, 
+	rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1, 
+adm31-old|o31|old adm31,
+	smso=\EG4, smul@, rmul@, use=adm31,
+# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
+adm36|LSI ADM36, 
+	OTbs, OTpt,
+	OTkn#4, 
+	if=/usr/lib/tabset/vt100, 
+	is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, 
+	use=vt100, 
+# (adm42: removed obsolete ":ma=^K^P:" -- esr)
+adm42|lsi adm42, 
+	OTbs, am, 
+	cols#80, lines#24, 
+	bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, 
+	el=\ET, ht=^I, il1=\EE$<270>, ind=^J, ip=$<6*>,
+	kcud1=^J, kcuf1=^L, kcuu1=^K, kcub1=^H, khome=^^,
+	pad=\177, rmir=\Er, smir=\Eq,
+	invis@, smul@, rmul@, use=adm+sgr, 
+# The following termcap for the Lear Siegler ADM-42 leaves the 
+# "system line" at the bottom of the screen blank (for those who 
+# find it distracting otherwise)
+adm42-ns|lsi adm-42 with no system line,
+	il1=\EE\EF\s^I, cbt=\EI\EF\s^I, ed=\EY\EF\s^I, el=\ET\EF\s^I,
+	clear=\E;\EF\s^I, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF\s^I, 
+	dch1=\EW\EF\s^I, dl1=\ER\EF\s^I, rmir=\Er\EF\s^I, smir=\Eq\EF\s^I, 
+	use=adm42,
+# ADM 1178 terminal -- rather like an ADM-42.  Manual is dated March 1 1985.
+# The insert mode of this terminal is commented out because it's broken for our
+# purposes in that it will shift the position of every character on the page,
+# not just the cursor line!
+# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
+adm1178|1178|lsi adm1178, 
+	am, 
+	cols#80, lines#24, xmc#1, 
+	bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, 
+	cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, 
+	home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H, 
+	kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, .rmir=\E>, rmso=\EG0, 
+	rmul=\EG0, sgr0=\E), .smir=\E<, smso=\EG4, smul=\EG1, 
+
+#### Qume (qvt)
+#
+#	Qume, Inc.
+#	3475-A North 1st Street
+#	San Jose CA 95134
+#	Vox: (800)-457-4447
+#	Fax: (408)-473-1510
+#	Net: josed@techsupp.wyse.com (Jose D'Oliveira)
+#
+# Qume was bought by Wyse, but still (as of early 1995) has its own support
+# group and production division.
+#
+# Discontinued Qume models:
+#
+# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
+# built to replace them, and a qvt119+ which was a 101+ with available wide
+# mode (132 columns).  There was a qvt103 which added vt100/vt131 emulations
+# and an ANSI-compatible qvt203 that replaced it.  Qume started producing
+# ANSI-compatible terminals with the qvt323 and qvt61.
+#
+# Current Qume models (as of February 1995):
+#
+# All current Qume terminals have ANSI-compatible operation modes.
+# Qume is still producing the qvt62, which features emulations for other
+# popular lines such as ADDS, and dual-host capabilities.  The qvt82 is
+# designed for use as a SCO ANSI terminal.  The qvt70 is a color terminal
+# with many emulations including Wyse370, Wyse 325, etc.  Their newest
+# model is the qvt520, which is vt420-compatible.
+#
+# There are some ancient printing Qume terminals under `Daisy Wheel Printers'
+#
+# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
+# setup mode.  Shift-s should be a configuration save to NVRAM.
+
+qvt101|qvt108|qume qvt 101 and QVT 108,
+	xmc#1, use=qvt101+, 
+
+# This used to have <cvvis=\E.2> but no <cnorm> or <civis>.  The BSD termcap
+# file had <cvvis=\EM4 \200\200\200>.  I've done the safe thing and yanked 
+# both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
+# What seems to be going on here is that this entry was designed so that
+# the normal highlight is bold and standout is dim plus something else
+# (reverse-video maybe?  But then, are there two <rev> sequences?)  
+qvt101+|qvt101p|qume qvt 101 PLUS product,
+	am, bel=^G, bw, kcbt=\EI, cbt=\EI, clear=^Z, cnorm=\E.4, 
+	cols#80, lines#24,
+	tbc=\E3, hts=\E1, cr=^M, cub1=^H, cud1=^J, cud1=^J, cuf1=^L,
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
+	flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, hs,
+	ht=^I, ich1=\EQ, il1=\EE, ind=^J, 
+	kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
+	kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
+	kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, kf10=^AI\r,
+	khome=^^, kich1=\EQ, kil1=\EE, kdl1=\ER, 
+	kel=\ET, ked=\EY, rmso=\E(, smso=\E0P\E), ul, xmc#0,
+	hs, tsl=\Eg\Ef, fsl=\r, dsl=\Eg\Ef\r, mc5=\E@, mc4=\EA,
+	invis@, use=adm+sgr, 
+qvt102|qume qvt 102,
+	cnorm=\E., use=qvt101,
+# (qvt103: added <rmam>/<smam> based on init string -- esr)
+qvt103|qume qvt 103,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24, it#8,
+	clear=\E[H\E[2J$<50>, cub1=^H, am, cup=\E[%i%p1%d;%p2%dH$<5>,
+	cuf1=\E[C$<2>, cuu1=\E[A$<2>, el=\E[K$<3>, ed=\E[J$<50>,
+	cud=\E[%p1%dB, cuu=\E[%p1%dA, cub=\E[%p1%dD, cuf=\E[%p1%dC, 
+	smso=\E[7m$<2>, rmso=\E[m$<2>, smul=\E[4m$<2>, rmul=\E[m$<2>,
+	bold=\E[1m$<2>, rev=\E[7m$<2>, blink=\E[5m$<2>, sgr0=\E[m$<2>,
+	sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, smkx=\E[?1h\E=, rmkx=\E[?1l\E>,
+	tbc=\E[3g, hts=\EH, home=\E[H,
+	kcuu1=\EOA, kcud1=\EOB, kcuf1=\EOC, kcub1=\EOD, kbs=^H,
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ht=^I, ri=\EM$<5>,
+	vt#3, xenl, xon, sc=\E7, rc=\E8, csr=\E[%i%p1%d;%p2%dr,
+	rmam=\E[?7l, smam=\E[?7h, 
+qvt103-w|qume qvt103 132 cols,
+	cols#132, lines#24, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
+qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
+	tbc=\E3, hts=\E1, ht=^I, cr=^M, cud1=^J, ind=^J, bel=^G, 
+	lines#24, cols#80, cnorm=\E.4, cvvis=\E.2,
+	is2=\EDF\EC\EG0\Er\E(\E%EX,
+	il1=\EE, am, cub1=^H, cbt=\EI, ed=\Ey, el=\Et, clear=\E*1,
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, dch1=\EW, dl1=\ER,
+	cud1=^J, rmir=\Er, home=^^, smir=\Eq, kf0=^AI\r,
+	kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, kbs=^H, kcud1=^J, khome=^^, kcub1=^H,
+	kcuf1=^L, kcuu1=^K, mir, msgr, cuf1=^L,
+	xmc#0, ri=\EJ, cuu1=^K, smul=\EG8, flash=\En0$<200>\En1,
+	hs, tsl=\Eg\Ef, fsl=\r, dsl=\Eg\Ef\r, mc5=\E@, mc4=\EA,
+	use=adm+sgr,
+qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
+	lines#25, use=qvt119+,
+qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
+	cols#132, is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
+qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
+	lines#25, use=qvt119+, 
+qvt203|qvt203+|qume qvt 203 Plus, 
+	dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, 
+	ind=\n$<30>, ip=$<7>, kf0=\E[29~, kf1=\E[17~, 
+	kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, 
+	kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[28~, 
+	rmir=\E[4l, smir=\E[4h, 
+	use=qvt103,
+qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
+	cols#132, lines#24, rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
+#
+#	Since a command is present for enabling 25 data lines,
+#	a specific terminfo entry may be generated for the 203.
+#	If one is desired for the QVT 119 PLUS then 25 lines must
+#	be selected in the status line (setup line 9).
+#
+qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
+	cols#80, lines#25, is2=\E[=40h\E[?3l, use=qvt203,
+qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
+	cols#132, lines#25, rs2=\E[?3h\E[=40h, use=qvt203,
+
+#### Televideo (tvi)
+#
+#	TeleVideo
+#	550 East Brokaw Road
+#	PO Box 49048    95161
+#	San Jose CA 95112
+#	Vox: (408)-954-8333
+#	Fax: (408)-954-0623
+#
+#% TeleVideo: Dick Kelby (408)-955-7494 (Application Mgr)
+#
+# There are some tvi terminals that require incredible amounts of padding and
+# some that don't.  I'm assuming tvi912 and tvi920 are the old slow ones, and
+# tvi912b, tvi912c, tvi920b, tvi920c are the new ones that don't need padding.
+#
+# All of these terminals (912 to 970 and the tvipt) are discontinued.  Newer
+# Televideo terminals are ANSI and PC-ANSI compatible.
+
+tvi803|televideo 803,
+	clear=\E*$<10>, use=tvi950,
+
+# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
+# Switch settings are:
+# 
+# S1  1 2 3 4
+#     D D D D  9600
+#     D D D U    50
+#     D D U D    75
+#     D D U U   110
+#     D U D D   135
+#     D U D U   150
+#     D U U D   300
+#     D U U U   600
+#     U D D D  1200
+#     U D D U  1800
+#     U D U D  2400
+#     U D U U  3600
+#     U U D D  4800
+#     U U D U  7200
+#     U U U D  9600
+#     U U U U 19200
+# 
+# S1  5 6 7 8
+#     U D X D  7N1 (data bits, parity, stop bits) (X means ignored)
+#     U D X U  7N2
+#     U U D D  7O1
+#     U U D U  7O2
+#     U U U D  7E1
+#     U U U U  7E2
+#     D D X D  8N1
+#     D D X U  8N2
+#     D U D D  8O1
+#     D U U U  8E2
+# 
+# S1  9  Autowrap
+#     U  on
+#     D  off
+# 
+# S1 10  CR/LF
+#     U  do CR/LF when CR received
+#     D  do CR when CR received
+# 
+# S2  1  Mode
+#     U  block
+#     D  conversational
+# 
+# S2  2  Duplex
+#     U  half
+#     D  full
+# 
+# S2  3  Hertz
+#     U  50
+#     D  60
+# 
+# S2  4  Edit mode
+#     U  local
+#     D  duplex
+# 
+# S2  5  Cursor type
+#     U  underline
+#     D  block
+# 
+# S2  6  Cursor down key
+#     U  send ^J
+#     D  send ^V
+# 
+# S2  7  Screen colour
+#     U  green on black
+#     D  black on green
+# 
+# S2  8  DSR status (pin 6)
+#     U  disconnected
+#     D  connected
+# 
+# S2  9  DCD status (pin 8)
+#     U  disconnected
+#     D  duplex
+# 
+# S2 10  DTR status (pin 20)
+#     U  disconnected
+#     D  duplex
+# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
+# <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
+tvi910|televideo model 910, 
+	OTbs, am, msgr,
+	cols#80, it#8, lines#24, xmc#1, 
+	bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, 
+	el=\ET, home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=\t, 
+	if=/usr/share/tabset/stdcrt, ind=^J, kbs=^H, kcub1=^H, 
+	kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, 
+	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 
+	kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 
+	khome=^^, vpa=\E[%p1%{32}%+%c, invis@, use=adm+sgr,
+# From: Alan R. Rogers <rogers%albany@csnet-relay>
+# as subsequently hacked over by someone at SCO
+# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
+#
+# Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
+#
+# S1  1 2 3 4:
+#     D D D D  9600     D D D U    50     D D U D    75     D D U U   110
+#     D U D D   135     D U D U   150     D U U D   300     D U U U   600
+#     U D D D  1200     U D D U  1800     U D U D  2400     U D U U  3600
+#     U U D D  4800     U U D U  7200     U U U D  9600     U U U U 19200
+#
+# S1  5 6 7 8:
+#     U D X D  7N1     U D X U  7N2     U U D D  7O1     U U D U  7O2
+#     U U U D  7E1     U U U U  7E2     D D X D  8N1     D D X U  8N2
+#     D U D D  8O1     D U U U  8E2
+# 
+# S1  9  Autowrap            (U = on, D = off)
+# S1 10  CR/LF               (U = CR/LF on CR received, D = CR on CR received)
+# S2  1  Mode                (U = block, D = conversational)
+# S2  2  Duplex              (U =  half, D = full)
+# S2  3  Hertz               (U = 50, D = 60)
+# S2  4  Edit mode           (U = local, D = duplex)
+# S2  5  Cursor type         (U = underline, D = block)
+# S2  6  Cursor down key     (U = send ^J, D = send ^V)
+# S2  7  Screen colour       (U = green on black, D = black on green)
+# S2  8  DSR status (pin 6)  (U = disconnected, D = connected)
+# S2  9  DCD status (pin 8)  (U = disconnected, D = connected)
+# S2 10  DTR status (pin 20) (U = disconnected, D = connected)
+#
+tvi910+|televideo 910+, 
+	dch1=\EW, dl1=\ER$<33*>, home=^^,
+	ich1=\EQ, il1=\EE$<33*>, kf0=^A@\r, kf1=^AA\r, 
+	kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, 
+	kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, 
+	ll=\E=7 , 
+	use=tvi910,
+
+# (tvi912: removed obsolete ":ma=^K^P^L :", added  <flash> and
+# <khome> from BRL entry -- esr)
+tvi912|tvi914|tvi920|old televideo 912/914/920, 
+	OTbs, OTpt, am, msgr, 
+	it#8, cols#80, lines#24, xmc#1, 
+	bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER$<33*>, ed=\Ey, el=\ET, 	flash=\Eb$<50/>\Ed, 
+	home=^^, ht=^I, hts=\E1, ich1=\EQ,
+	if=/usr/share/tabset/stdcrt, il1=\EE$<33*>, ind=^J, 
+	kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 
+	kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 
+	kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 
+	kf8=^AG\r, kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, 
+	smso=\Ej, smul=\El, tbc=\E3, 
+# the 912 has a <funct> key that's like shift: <funct>8 xmits "^A8\r".
+# The 920 has this plus real function keys that xmit different things.
+# Terminfo makes you use the funct key on the 912 but the real keys on the 920.
+tvi912c|tvi912b|new televideo 912, 
+	dl1=\ER$<5*>, il1=\EE$<5*>, use=tvi912,
+# set to page 1 when entering curses application (\E-17 )
+# reset to page 0 when exiting curses application (\E-07 )
+tvi912-2p|tvi920-2p|tvi-2p|televideo w/2 pages, 
+	rmcup=\E-07\s, smcup=\E-17\s, use=tvi912,
+# We got some new tvi912c terminals that act really weird on the regular 
+# termcap, so one of our gurus worked this up. Seems that cursor 
+# addressing is broken.
+tvi912cc|tvi912 at cowell college,
+	cup@, use=tvi912c,
+
+# Here are the switch settings for the tvi920c:
+#
+# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
+# 2: 9600	3: 4800		4: 2400		5: 1200
+# 6:  600	7:  300		8:  150		9:   75
+# 10: 110
+#
+# S2 UART/Terminal options:
+# 		Up			Down
+# 1:		Not used		Not allowed
+# 2:	Alternate character set	  Standard character set
+# 3:	    Full duplex		    Half duplex
+# 4:	    50 Hz refresh	    60 Hz refresh
+# 5:	      No parity		     Send parity
+# 6:	     2 stop bits	     1 stop bit
+# 7:	     8 data bits	     7 data bits
+# 8:		Not used		Not allowed on Rev E or lower
+# 9:	     Even parity	     Odd parity
+# 10:	    Steady cursor	    Blinking cursor
+# 	(On Rev E or lower, use W25 instead of switch 10.)
+# 
+# S5 UART/Terminal options:
+# 		Open			Closed
+# 1:	P3-6 Not connected	DSR received on P3-6
+# 2:	P3-8 Not connected	DCD received on P3-8
+#
+# 3 Open, 4 Open:		P3-20 Not connected
+# 3 Open, 4 Closed:	DTR on when terminal is on
+# 3 Closed, 4 Open:	DTR is connected to RTS
+# 3 Closed, 4 Closed:	Not allowed
+#
+# 5 Closed:	HDX printer (hardware control) Rev. K with extension port off,
+# 		all data transmitted out of the modem port (P3) will also be
+# 		transmitted out of the printer port (P4).
+#
+# 6 Open, 7 Open:		Not allowed
+# 6 Open, 7 Closed:	20ma current loop input
+# 6 Closed, 7 Open:	RS232 input
+# 6 Closed, 7 Closed:	Not allowed
+#
+# Jumper options:
+# If the jumper is installed, the effect will occur (the next time the terminal
+# is switched on).
+#
+# S4/W31:	Enables automatic LF upon receipt of CR from
+# 		remote or keyboard.
+# S4/W32:	Enables transmission of EOT at the end of Send.  If not 
+# 		installed, a carriage return is sent.
+# S4/W33:	Disables automatic carriage return in column 80.
+# S4/W34:	Selects Page Print Mode as initial condition.  If not 
+# 		installed, Extension Mode is selected.
+#
+tvi920b|tvi920c|new televideo 920, 
+	dl1=\ER$<5*>, il1=\EE$<5*>, kf0=^AI\r, kf1=^A@\r, 
+	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 
+	kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, use=tvi912,
+
+# Televideo 921 and variants
+# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
+# (tvi921: removed :ko=bt: before translation, I see no backtab cap;
+# also added empty <acsc> to suppress tic warning -- esr)
+tvi921|televideo model 921 with sysline same as page & real vi function, 
+	OTbs, OTpt, am, hs, xenl, xhp, 
+	cols#80, lines#24, xmc#0, 
+	acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, 
+	cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, 
+	cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, 
+	dsl=\Ef\r\Eg, ed=\EY, el=\ET, fsl=\Eg, home=^^, 
+	ht=^I, ich1=\EQ, if=/usr/share/tabset/stdcrt, 
+	il1=\EE, ind=^J, is2=\El\E"\EF1\E.3\017\EA\E<, 
+	kbs=^H, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, 
+	kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>, ked=\EY, 
+	kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%, 
+	rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, 
+	invis@, use=adm+sgr,
+# without the beeper
+# (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
+# also added empty <acsc> to suppress tic warning -- esr)
+tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper, 
+	am, hs, xenl, xhp, 
+	cols#80, lines#24, xmc#0, 
+	acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, 
+	cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, 
+	cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, 
+	dsl=\Ef\r\Eg, ed=\EY, el=\ET, 
+	flash=\Eb$<200/>\Ed, fsl=\Eg, 
+	home=^^, ht=^I, ich1=\EQ, 
+	if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, 
+	is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, 
+	kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, 
+	kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, 
+	kil1=\EE, nel=^M^J, rmacs=\E%, smacs=\E$, tsl=\Ef\EG0, 
+	invis@, use=adm+sgr,
+# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
+tvi92D|tvi92B with DTR instead of XON/XOFF & better padding, 
+	dl1=\ER$<2*/>, il1=\EE$<2*/>, 
+	is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>, 
+	kil1=\EE$<2*/>, 
+	use=tvi92B,
+
+# (tvi924: This used to have <dsl=\Es0>, <fsl=\031>.  I put the new strings
+# in from a BSD termcap file because it looks like they do something the
+# old ones skip -- esr)
+tvi924|televideo tvi924, 
+	am, bw, hs, in, mir, msgr, xenl, xon, 
+	cols#80, it#8, lines#24, wsl#80, xmc#0, 
+	bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, 
+	clear=\E*0, cnorm=\E.3, cr=^M, 
+	csr=\E_%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V, 
+	cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	cvvis=\E.1, dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, 
+	el=\Et, flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, 
+	hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt, 
+	il1=\EE, ind=^J, invis=\EG1, 
+	is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0, kbs=^H, 
+	kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, 
+	kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, 
+	kf1=^AA\r, kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, 
+	kf13=^AM\r, kf14=^AN\r, kf15=^AO\r, kf2=^AB\r, 
+	kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, 
+	kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^, 
+	kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, 
+	lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, 
+	lf8=F9, lf9=F10, pfkey=\E|%p1%'1'%+%c%p2%s\031, 
+	ri=\Ej, tbc=\E3, tsl=\Ef, invis@, use=adm+sgr,
+
+# TVI925 DIP switches.  In each of these, D = Down and U = Up,
+#
+# Here are the settings for the external (baud) switches (S1):
+#
+#             Position		Baud
+# 7	8	9	10		[Printer]
+# 1	2	3	4		[Main RS232]
+# -----------------------------------------------------
+# D	D	D	D	9600
+# D	D	D	U	  50
+# D	D	U	D	  75
+# D	D	U	U	 110
+# D	U	D	D	 135
+# D	U	D	U	 150
+# D	U	U	D	 300
+# D	U	U	U	 600
+# U	D	D	D	1200
+# U	D	D	U	1800
+# U	D	U	D	2400
+# U	D	U	U	3600
+# U	U	D	D	4800
+# U	U	D	U	7200
+# U	U	U	D	9600
+# U	U	U	U	19200
+# 
+# 
+# Settings for word length and stop-bits (S1)
+#
+#  Position	Description
+# 5	6	
+# ---------------------------
+# U	-	7-bit word
+# D	-	8-bit word
+# -	U	2 stop bits
+# -	D	1 stop bit
+# 
+# 
+# S2 (external) settings
+#
+# Position	Up	Dn	Description
+# --------------------------------------------
+# 1		X		Local edit
+# 			X	Duplex edit (transmit editing keys)
+# --------------------------------------------
+# 2		X		912/920 emulation
+# 			X	925
+# --------------------------------------------
+# 3			X
+# 4			X	No parity
+# 5			X	
+# --------------------------------------------
+# 3			X
+# 4			X	Odd parity
+# 5		X	
+# --------------------------------------------
+# 3			X
+# 4		X		Even parity
+# 5		X	
+# --------------------------------------------
+# 3		X	
+# 4			X	Mark parity
+# 5		X		
+# --------------------------------------------
+# 3		X
+# 4		X		Space parity
+# 5		X
+# --------------------------------------------
+# 6		X		White on black display
+# 			X	Black on white display
+# --------------------------------------------
+# 7			X	Half Duplex
+# 8			X
+# --------------------------------------------
+# 7		X		Full Duplex
+# 8			X	
+# --------------------------------------------
+# 7			X	Block mode
+# 8		X	
+# --------------------------------------------
+# 9			X	50 Hz
+# 		X		60 Hz
+# --------------------------------------------
+# 10		X		CR/LF (Auto LF)
+# 			X	CR only
+# 
+# S3 (internal switch) settings:
+# 
+# Position	Up	Dn	Description
+# --------------------------------------------
+# 1		X		Keyclick off 
+# 			X	Keyclick on
+# --------------------------------------------
+# 2			X	English
+# 3			X	
+# --------------------------------------------
+# 2			X	German
+# 3		X		
+# --------------------------------------------
+# 2		X		French
+# 3			X	
+# --------------------------------------------
+# 2		X		Spanish
+# 3		X	
+# --------------------------------------------
+# 4			X	Blinking block cursor
+# 5			X	
+# --------------------------------------------
+# 4			X	Blinking underline cursor
+# 5		X		
+# --------------------------------------------
+# 4		X		Steady block cursor
+# 5			X	
+# --------------------------------------------
+# 4		X		Steady underline cursor
+# 5		X	
+# --------------------------------------------
+# 6		X		Screen blanking timer (ON)
+# 			X	Screen blanking timer (OFF)
+# --------------------------------------------
+# 7		X		Page attributes
+# 			X	Line attributes
+# --------------------------------------------
+# 8		X		DCD disconnected
+# 			X	DCD connected
+# --------------------------------------------
+# 9		X		DSR disconnected
+# 			X	DSR connected
+# --------------------------------------------
+# 10		X		DTR Disconnected
+# 			X	DTR connected
+# --------------------------------------------
+#
+# (tvi925: BSD has <clear=\E*>.  I got <is2> and <ri> from there -- esr)
+tvi925|televideo 925, 
+	am, bw, hs, ul, OTbs,
+	cols#80, lines#24, xmc#1, 
+	bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, 
+	cub1=^H, cud1=^V, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, 
+	el=\ET, flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, 
+	ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J, kbs=^H, is2=\El\E",
+	kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, 
+	kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, 
+	kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, 
+	kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 
+	kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, 
+	ri=\Ej, tbc=\E3, tsl=\Eh\Ef, 
+	invis@, use=adm+sgr,
+# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
+# to avoid "magic cookie" standout glitch:
+tvi925-hi|TeleVideo Model 925 with half intensity standout mode, 
+	xmc@, 
+	kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925, 
+
+# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
+# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
+# for additional capabilities, 
+# The following tvi descriptions from B:pjphar and virus!mike
+# is for all 950s.  It sets the following attributes:
+# full duplex (\EDF)		write protect off (\E()
+# conversation mode (\EC)	graphics mode off (\E%)
+# white on black (\Ed)		auto page flip off (\Ew)
+# turn off status line (\Eg)	clear status line (\Ef\r)
+# normal video (\E0)		monitor mode off (\EX or \Eu)
+# edit mode (\Er)		load blank char to space (\Ee\040)
+# line edit mode (\EO)		enable buffer control (^O)
+# protect mode off (\E\047)	duplex edit keys (\El)
+# program unshifted send key to send line all (\E016)
+# program shifted send key to send line unprotected (\E004)
+# set the following to nulls:
+#	field delimiter (\Ex0\200\200)
+#	line delimiter (\Ex1\200\200)
+#	start-protected field delimiter (\Ex2\200\200)
+#	end-protected field delimiter (\Ex3\200\200)
+# set end of text delimiter to carriage return/null (\Ex4\r\200)
+# 
+#                     TVI 950 Switch Setting Reference Charts
+# 
+#                                     TABLE 1:
+# 
+#      S1     1     2     3     4     5     6     7     8     9    10
+#          +-----------------------+-----+-----+-----------------------+
+#          | Computer Baud Rate    |Data |Stop | Printer Baud Rate     |
+#          |                       |Bits |Bits |                       |
+#   +------+-----------------------+-----+-----+-----------------------+
+#   |  Up  |        See            |  7  |  2  |        See            |
+#   +------+-----------------------+-----+-----+-----------------------+
+#   | Down |      TABLE 2          |  8  |  1  |      TABLE 2          |
+#   +------+-----------------------+-----+-----+-----------------------+
+# 
+# 
+#      S2     1     2     3     4     5     6     7     8     9    10
+#          +-----+-----+-----------------+-----+-----------+-----+-----+
+#          |Edit |Cursr|    Parity       |Video|Transmiss'n| Hz  |Click|
+#   +------+-----+-----+-----------------+-----+-----------+-----+-----+
+#   |  Up  | Dplx|Blink|      See        |GonBk|   See     | 60  | Off |
+#   +------+-----+-----+-----------------+-----+-----------+-----+-----+
+#   | Down |Local|St'dy|    TABLE 3      |BkonG|  CHART    | 50  | On  |
+#   +------+-----+-----+-----------------+-----+-----------+-----+-----+
+#  
+#                                    TABLE 2:
+# 
+#             +-----------+-----+-----+-----+-----+-----------+
+#             | Display   |  1  |  2  |  3  |  4  |   Baud    |
+#             +-----------+-----+-----+-----+-----+           |
+#             | Printer   |  7  |  8  |  9  | 10  |   Rate    |
+#             +-----------+-----+-----+-----+-----+-----------+
+#                         |  D  |  D  |  D  |  D  |   9600    |
+#                         |  U  |  D  |  D  |  D  |     50    |
+#                         |  D  |  U  |  D  |  D  |     75    |
+#                         |  U  |  U  |  D  |  D  |    110    |
+#                         |  D  |  D  |  U  |  D  |    135    |
+#                         |  U  |  D  |  U  |  D  |    150    |
+#                         |  D  |  U  |  U  |  D  |    300    |
+#                         |  U  |  U  |  U  |  D  |    600    |
+#                         |  D  |  D  |  D  |  U  |   1200    |
+#                         |  U  |  D  |  D  |  U  |   1800    |
+#                         |  D  |  U  |  D  |  U  |   2400    |
+#                         |  U  |  U  |  D  |  U  |   3600    |
+#                         |  D  |  D  |  U  |  U  |   4800    |
+#                         |  U  |  D  |  U  |  U  |   7200    |
+#                         |  D  |  U  |  U  |  U  |   9600    |
+#                         |  U  |  U  |  U  |  U  |  19200    |
+#                         +-----+-----+-----+-----+-----------+
+# 
+#                                    TABLE 3:
+#                         +-----+-----+-----+-----------+
+#                         |  3  |  4  |  5  |   Parity  |
+#                         +-----+-----+-----+-----------+
+#                         |  X  |  X  |  D  |    None   |
+#                         |  D  |  D  |  U  |     Odd   |
+#                         |  D  |  U  |  U  |    Even   |
+#                         |  U  |  D  |  U  |    Mark   |
+#                         |  U  |  U  |  U  |   Space   |
+#                         +-----+-----+-----+-----------+
+#                                 X = don't care
+# 
+#                                     CHART:
+#                         +-----+-----+-----------------+
+#                         |  7  |  8  | Communication   |
+#                         +-----+-----+-----------------+
+#                         |  D  |  D  |  Half Duplex    |
+#                         |  D  |  U  |  Full Duplex    |
+#                         |  U  |  D  |     Block       |
+#                         |  U  |  U  |     Local       |
+#                         +-----+-----+-----------------+
+# 
+# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:". 
+# I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich> 
+# should be present and all tvi native modes use the same string for this.
+# Finally, note that BSD has cud1=^V. -- esr) 
+tvi950|televideo 950,
+	am, hs, mir, msgr, xenl, xon, OTbs,
+	cols#80, it#8, lines#24, xmc#1,
+	acsc=d\rc\fe\nb\ti^K, bel=^G, cbt=\EI, clear=\E*,
+	cr=\r, cub1=\b, cud1=\n, cuf1=\f,
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+	dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et,
+	flash=\Eb$<200/>\Ed,
+	fsl=\r, home=^^, ht=\t, hts=\E1, ich1=\EQ, il1=\EE, ind=\n,
+	is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s^O\t\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\t\Ex3\0\0\Ex4\r\0\Ef\r,
+	kbs=\b, kcbt=\EI, kclr=\E*, kcub1=\b, kcud1=^V,
+	kcuf1=\f, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey,
+	kel=\Et, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
+	kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
+	kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
+	ri=\Ej, rmacs=^X, rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
+	invis@, use=adm+sgr,
+#
+# is for 950 with two pages adds the following:
+#	set 48 line page (\E\\2)
+#	place cursor at page 0, line 24, column 1 (\E-07 )
+#	set local (no send) edit keys (\Ek)
+#
+# two page 950 adds the following:
+#	when entering ex, set 24 line page (\E\\1)
+#	when exiting ex, reset 48 line page (\E\\2)
+#			 place cursor at 0,24,1 (\E-07 )
+#	set duplex (send) edit keys (\El) when entering vi
+#	set local (no send) edit keys (\Ek) when exiting vi
+#
+tvi950-2p|televideo950 w/2 pages,
+	is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s^O\t\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\t\Ex3\0\0\Ex4\r\0\E\\2\E-07\s\t,
+	rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
+	smkx=\El,
+	use=tvi950,
+#
+# is for 950 with four pages adds the following:
+#	set 96 line page (\E\\3)
+#	place cursor at page 0, line 24, column 1 (\E-07 )
+#
+# four page 950 adds the following:
+#	when entering ex, set 24 line page (\E\\1)
+#	when exiting ex, reset 96 line page (\E\\3)
+#			 place cursor at 0,24,1 (\E-07 )
+#
+tvi950-4p|televideo950 w/4 pages,
+	is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s^O\t\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\t\Ex3\0\0\Ex4\r\0\E\\3\E-07\s\t,
+	rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
+	smkx=\El,
+	use=tvi950,
+#
+# <is2> for reverse video 950 changes the following:
+#	set reverse video (\Ed)
+#
+# set vb accordingly (\Ed ...delay... \Eb)
+#
+tvi950-rv|televideo950 rev video,
+	flash=\Ed$<200/>\Eb,
+	is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s^O\t\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\t\Ex3\0\0\Ex4\r\0,
+	use=tvi950,
+
+# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
+tvi950-rv-2p|televideo950 rev video w/2 pages,
+	flash=\Ed$<200/>\Eb,
+	is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s^O\t\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\t\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
+	rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
+	smkx=\El,
+	use=tvi950,
+
+# tvi950-rv uses the appropriate entries from 950-4p and 950-rv
+tvi950-rv-4p|televideo950 rev video w/4 pages,
+	flash=\Ed$<200/>\Eb,
+	is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s^O\t\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\t\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
+	rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
+	smkx=\El,
+	use=tvi950,
+# From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
+# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
+# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
+# the :rs: string, inserted the <ich> implied by the termcap :ko: string.  Note
+# the :ko: string had :cl: in it, which means that one of the original
+# <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
+# the 950 has.   Finally, corrected the <kel> string to match the 950 and what
+# ko implies -- esr)
+# If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
+# also work.
+tvi955|televideo 955, 
+	mc5i, msgr@, OTbs,
+	it#8, xmc@, 
+	acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ,
+	blink=\EG2, civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH, 
+	cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1, 
+	rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r, 
+	is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, 
+	khts=\E1, knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, 
+	mc0=\EP, rmacs=\E%, rmam=\E[=7l, rmxon=^N, 
+	sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O, 
+	use=tvi950,
+tvi955-w|955-w|televideo955 w/132 cols, 
+	cols#132, 
+	is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El,
+	use=tvi955,
+# use half-intensity as normal mode, full intensity as <bold>
+tvi955-hb|955-hb|televideo955 half-bright, 
+	bold=\E[=5l, dim@, 
+	is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El, sgr0=\EG0\E[=5h, use=tvi955,
+# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
+# (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
+# added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
+# According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
+# it does to the function keys.  I deduced <rmam>/<smam>.
+# also added empty <acsc> to suppress tic warning,  -- esr)
+tvi970|televideo 970, 
+	OTbs, OTpt, am, da, db, mir, msgr, 
+	cols#80, it#8, lines#24, 
+	acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
+	cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, cuu1=\EM, cvvis=\E[1Q,
+	dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r, ed=\E[J, el=\E[K,
+	flash=\E[5m$<200/>\E[m, home=\E[H, hpa=\E[%i%p1%dG, ht=\t,
+	il1=\E[L, is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J, kbs=^H,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E?a, kf2=\E?b,
+	kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f, kf7=\E?g, kf8=\E?h,
+	kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B, rmam=\E[?7h, rmcup=,
+	rmir=\E[4l, .rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smacs=\E(B,
+	smam=\E[?7l, smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, .smkx=\E=,
+	smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
+tvi970-vb|televideo 970 with visual bell, 
+	flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
+	use=tvi970, 
+tvi970-2p|televideo 970 with using 2 pages of memory, 
+	rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
+	use=tvi970, 
+# Works with vi and rogue.  NOTE: Esc v sets autowrap on, Esc u sets 80 chars
+# per line (rather than 40), Esc K chooses the normal character set.  Not sure
+# padding is needed, but adapted from the tvi920c termcap.  The <smso> and 
+# <smul> strings are klutzy, but at least use no screen space.
+# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:".  I wish we knew <rmam>,
+# its absence means <smam>=\Ev isn't safe to use. -- esr)
+# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84. 
+# The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
+# F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
+tvipt|televideo personal terminal, 
+	OTbs, am, 
+	cols#80, lines#24, 
+	cbt=\EI, clear=^Z, cub1=^H, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	dl1=\ER$<5*>, ed=\EY, el=\ET, home=^^, 
+	if=/usr/share/tabset/stdcrt, il1=\EE$<5*>, 
+	is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J, 
+	kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, 
+	mc4=^T, mc5=^R, rmso=\EF, rmul=\EF, 
+	.smam=\Ev, smso=\EG1@A\EH, smul=\EG1B@\EH, 
+# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
+tvi9065|televideo 9065,
+	am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
+	cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4,
+	nlab#8, vt#0, wnum#0, wsl#30,
+	acsc=0_'rjhkglfmeniopxjqksqtmulvown, bel=^G,
+	blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
+	cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=^V,
+	cuf=\E[%p1%dC, cuf1=\f,
+	cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c, cuu=\E[%p1%dA,
+	cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW,
+	dim=\EGp, dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r,
+	ech=\E[%p1%d@, ed=\EY, el=\ET, flash=\Eb$<15>\Ed,
+	fsl=\r, home=^^, ht=\t, hts=\E1, ich=\E[%p1%d@,
+	if=/usr/share/tabset/stdcrt, il=\E[%p1%dL, il1=\EE,
+	ind=\n, indn=\E[%p1%dS, invis=\EG1, ip=$<3>,
+	is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
+	is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
+	kbs=\b, kcbt=\EI, kcub1=\b, kcud1=^V, kcuf1=\f,
+	kcuu1=^K, kdch1=\EW, kf1=^A@\r, kf10=^AI\r,
+	kf11=^AJ\r, kf12=^AK\r, kf2=^AA\r, kf3=^AB\r,
+	kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
+	kf9=^AH\r, khome=^^, ll=\E[25;1H, mc0=\E[0;0i,
+	mc4=\Ea, mc5=\E`, nel=\r\n,
+	pfkey=\E|%p1%'0'%+%c3%p2%s^Y,
+	pfloc=\E|%p1%'0'%+%c2%p2%s^Y,
+	pfx=\E|%p1%'0'%+%c1%p2%s^Y, pln=\E_%p1%'?'%+%c%p2%s\r,
+	prot=\E&, rep=\E[%p2%db%p1%c, rev=\EG4,
+	rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
+	rmacs=\E%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
+	rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0,
+	rmul=\EG0, rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
+	rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
+	rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
+	sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
+	sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2,
+	smdc=\Er, smir=\Eq, smln=\E[4;2v, smso=\EGt,
+	smul=\EG8, smxon=^O, tbc=\E3, tsl=\E[4;1v\E_30,
+	uc=\EG8\EG0,
+
+#### Visual (vi)
+#
+# In September 1993, Visual Technology of Westboro, Massachusetts,
+# merged with White Pine Software of Nashua, New Hampshire.
+#
+# White Pine Software may be contacted at +1 603/886-9050.
+# Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
+#
+
+# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
+# Recently I hacked together the following termcap for Visual
+# Technology's Visual 50 terminal. It's a slight modification of
+# the vt52 termcap. 
+# It's intended to run when the Visual 50 is in vt52 emulation mode
+# (I know what you're thinking; if it's emulating a vt52, then why
+# another termcap? Well, it turns out that the Visual 50 can handle
+# <dl1> and db(?) among other things, which the vt52 can't)
+# The termcap works OK for the most part. The only problem is on
+# character inserts. The whole line gets painfully redrawn for each
+# character typed. Any suggestions?
+# Beau's entry is combined with the vi50 entry from University of Wisconsin.
+# Note especially the <il1> function.  <kf4>-<kf6> are really l4-l6 in
+# disguise; <kf7>-<kf9> are really l1-l3.
+vi50|visual 50, 
+	OTbs, OTpt, am, da, db, msgr, 
+	cols#80, it#8, lines#24, 
+	OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, 
+	cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 
+	cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, 
+	home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H, 
+	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 
+	kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV, kf5=\EE, 
+	kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH, 
+	nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,  
+# this one was BSD & SCO's vi50
+vi50adm|visual 50 in adm3a mode, 
+	am, msgr, 
+	cols#80, it#8, lines#24, 
+	bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM, 
+	ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H, 
+	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 
+	khome=\EH, rmso=\ET, smso=\EU, 
+# From: Jeff Siegal <jbs@athena.mit.edu>
+vi55|Visual 55, 
+	am, mir, msgr, OTbs,
+	cols#80, it#8, lines#24, 
+	clear=\Ev, csr=\E_%p1%'A'%+%c%p2%'A'%+%c, cub1=^H, 
+	cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 
+	cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, 
+	home=\EH, ht=\t, il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, 
+	kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 
+	ri=\EI, rmir=\Eb, rmso=\ET, smir=\Ea, 
+	smso=\EU, 
+
+# Visual 200 from BRL
+# The following switch settings are assumed for normal operation:
+#	FULL_DUPLEX		SCROLL			CR
+#	AUTO_NEW_LINE_ON	VISUAL_200_EMULATION_MODE
+# Other switches may be set for operator convenience or communication
+# requirements.
+# Character insertion is kludged in order to get around the "beep" misfeature.
+# (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
+# Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
+# and <dl1> strings, but we seem to get along fine without them.
+vi200|visual 200, 
+	OTbs, OTpt, am, mir, msgr, 
+	OTkn#10, cols#80, it#8, lines#24, 
+	acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H, 
+	cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 
+	cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, 
+	el=\Ex, home=\EH, ht=^I, hts=\E1, .ich1=\Ei \010\Ej, il1=\EL, 
+	ind=^J, invis=\Ea, kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, 
+	kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EO, kdl1=\EM, 
+	ked=\EJ, kel=\Et, kf0=\E?p, kf1=\E?q, kf2=\E?r, kf3=\E?s, 
+	kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w, kf8=\E?x, kf9=\E?y, 
+	khome=\EH, khts=\E1, kich1=\Ei, kil1=\EL, krmir=\Ej, 
+	mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, rmacs=\EG, 
+	rmkx=\E>, rmso=\E3, rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, 
+	sgr0=\E3\Eb, smacs=\EF, smkx=\E=, smso=\E4, tbc=\Eg, 
+# The older Visuals didn't come with function keys. This entry uses
+# <smkx> and <rmkx> so that the keypad keys can be used as function keys.
+# If your version of vi doesn't support function keys you may want
+# to use vi200-f.
+vi200-f|visual 200 no function keys, 
+	is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q, 
+	kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, 
+	kf7=\E?w, kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, 
+	smkx=\E=, smso@, 
+	use=vi200,
+vi200-rv|visual 200 reverse video, 
+	cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
+
+# the function keys are programmable but we don't reprogram them to their
+# default values with <is2> because programming them is very verbose. maybe
+# an initialization file should be made for the 300 and they could be stuck
+# in it.
+# (vi300: added <rmam>/<smam> based on init string -- esr)
+vi300|visual 300 ansi x3.64,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cr=^M, cud1=^J, ind=^J, bel=^G,
+	am, cub1=^H, bw, mir, ht=^I, xenl, cols#80, lines#24,
+	is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cud1=\E[B, cuf1=\E[C, ri=\EM,
+	cbt=\E[Z, home=\E[H, ed=\E[J, clear=\E[H\E[2J, el=\E[K,
+	il1=\E[L, dl1=\E[M, smir=\E[4h, rmir=\E[4l, dch1=\E[P$<40>,
+	sgr0=\E[m, smso=\E[1m, rmso=\E[m, smul=\E[4m, rmul=\E[m, khome=\E[H,
+	kcud1=\E[B, kcub1=\E[D, kcuf1=\E[C, kcuu1=\E[A, kf1=\E_A\E\\,
+	kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\, kf5=\E_E\E\\,
+	kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\, kf9=\E_I\E\\,
+	rmam=\E[?7l, smam=\E[?7h, 
+# some of the vi300s have older firmware that has the command
+# sequence for setting editing extent reversed.
+vi300-old|visual 300 with old firmware (set edit extent reversed),
+	is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
+	use=vi300,
+
+# Visual 500 prototype entry from University of Wisconsin.
+# The best place to look for the escape sequences is page A1-1 of the
+# Visual 500 manual.  The initialization sequence given here may be
+# overkill, but it does leave out some of the initializations which can
+# be done with the menus in set-up mode.
+# The :xp: line below is so that emacs can understand the padding requirements
+# of this slow terminal.  :xp: is 10 time the padding factor.
+# (vi500: removed unknown :xp#4: termcap;
+# also added empty <acsc> to suppress tic warning -- esr)
+vi500|visual 500, 
+	am, mir, msgr, 
+	cols#80, it#8, lines#33, 
+	acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M, 
+	csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB, 
+	cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 
+	cuu1=\EA, dch1=\EO$<3*/>, dl1=\EM$<3*/>, 
+	ed=\Ey$<3*/>, el=\Ex$<16/>, home=\EH, ht=\011$<8/>, 
+	il1=\EL\Ex$<3*/>, ind=^J, 
+	is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\, 
+	kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 
+	khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G, 
+	rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, 
+	smul=\E^D, 
+
+# The visual 550 is a visual 300 with tektronix graphics,
+# and with 33 lines. clear screen is modified here to
+# also clear the graphics.
+vi550|visual 550 ansi x3.64,
+	lines#33, clear=\030\E[H\E[2J, use=vi300,
+
+vi603|visual603|visual 603, 
+	hs, mir, 
+	blink=\E[5m, 
+	bel=^G, bold=\E[1m, clear=\E[H\E[J, csr=\E[%i%p1%d;%p2%dr, 
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 
+	dch1=\E[P, dl1=\E[M, dsl=\EP2;1~\E\\, ed=\E[J, 
+	el=\E[K, fsl=\E\\, il1=\E[L, ind=\ED, 
+	is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r, 
+	rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, 
+	rmul=\E[24m, sgr0=\E[m, smir=\E[4h, 
+	smso=\E[7m, smul=\E[4m, tsl=\EP2~, use=vt100,
+
+#### Wyse (wy)
+#
+#	Wyse Technology
+#	3471 North First Street
+#	San Jose, CA 95134
+#	Vox: (408)-473-1200
+#	Fax: (408) 473-1222
+#	Web: http://www.wyse.com
+#
+# Wyse sales can be reached by phone at 1-800-GET-WYSE.  Tech support is at
+# (800)-800-WYSE (option 5 gets you a human).  There's a Web page at the
+# obvious address, <http://www.wyse.com>.  They keep terminfo entries at
+# <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
+#
+# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
+# They now own the Qume and Amdek brands, too.  So these are the people to
+# talk with about all Link, Qume, and Amdek terminals.
+#
+# These entries include a few small fixes.
+# I canceled the bel capacities in the vb entries.
+# I made two trivial syntax fixes in the wyse30 entry.
+# I made some entries relative to adm+sgr.
+#
+#
+# Note: The wyse75, wyse85, and wyse99 have been discontinued.
+
+#	   Although the Wyse 30 can support more than one attribute
+#	it requires magic cookies to do so.  Many applications do not
+#	function well with magic cookies.  The following terminfo uses
+#	the protect mode to support one attribute (dim) without cookies.
+#	If more than one attribute is needed then the wy30-mc terminfo
+#	should be used.
+#
+wy30|wyse30|Wyse 30, 
+	am, bw, hs, mc5i, mir, msgr, xon, 
+	cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, 
+	acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, 
+	civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H, 
+	cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 
+	cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>, 
+	dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9, 
+	fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>, 
+	ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024, 
+	kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, 
+	kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, 
+	kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 
+	kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ, 
+	kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T, 
+	mc5=^X, nel=^M^J, pfx=\Ez%p1%'?'%+%c%p2%s\177, 
+	pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>, 
+	rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, 
+	sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 
+	sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, 
+	smso=\E`7\E), tbc=\E0, tsl=\EF, 
+#
+#	This terminal description uses the non-hidden attribute mode
+#	(with magic cookie).
+#
+# (wy30-mc: added <smcup> to suppress tic warning --esr)
+wy30-mc|wyse30-mc|wyse 30 with magic cookies, 
+	msgr@, 
+	ma@, xmc#1, 
+	blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003, 
+	rmcup=\EG0, rmso=\EG0, 
+	sgr=\EG%'0'%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 
+	sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, 
+	smso=\EG4, use=wy30, 
+	use=adm+sgr, 
+#	The mandatory pause used by <flash> does not work with
+#	older versions of terminfo.  If you see this effect then
+#	unset xon and delete the / from the delay.
+#	i.e. change $<100/> to $<100>
+wy30-vb|wyse30-vb|wyse 30 visible bell, 
+	bel@, use=wy30, 
+#
+#	   The Wyse 50 can support one attribute (e.g. Dim, Inverse,
+#	Normal) without magic cookies by using the protect mode.
+#	The following description uses this feature, but when more
+#	than one attribute is put on the screen at once, all attributes
+#	will be changed to be the same as the last attribute given.
+#	   The Wyse 50 can support more attributes when used with magic
+#	cookies.  The wy50-mc terminal description uses magic cookies
+#	to correctly handle multiple attributes on a screen.
+#
+wy50|wyse50|Wyse 50, 
+	am, bw, hs, mc5i, mir, msgr, xon, 
+	cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, 
+	acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, 
+	civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H, 
+	cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 
+	cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r, 
+	ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, 
+	home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>, 
+	is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H, 
+	kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, 
+	kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, 
+	kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 
+	kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 
+	kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 
+	kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 
+	ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, 
+	pfx=\Ez%p1%'?'%+%c%p2%s\177, 
+	pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E), 
+	ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, 
+	sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 
+	sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, 
+	smso=\E`6\E), tbc=\E0, tsl=\EF, 
+#
+#	This terminal description uses the non-hidden attribute mode
+#	(with magic cookie).
+#
+#	The mandatory pause used by flash does not work with some
+#	older versions of terminfo.  If you see this effect then
+#	unset <xon> and delete the / from the delay.
+#	i.e. change $<100/> to $<100>
+# (wy50-mc: added <smcup> to suppress tic warning --esr)
+wy50-mc|wyse50-mc|wyse 50 with magic cookies, 
+	msgr@, 
+	ma@, xmc#1, 
+	blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4, 
+	rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0, 
+	sgr=\EG%'0'%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 
+	sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, 
+	smso=\EGt, use=wy50, 
+	use=adm+sgr, 
+wy50-vb|wyse50-vb|wyse 50 visible bell, 
+	bel@, use=wy50, 
+wy50-w|wyse50-w|wyse 50 132-column, 
+	cols#132, lw#7, nlab#16, wsl#97, 
+	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, use=wy50, 
+wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell, 
+	bel@, 
+	use=wy50-w, 
+#
+#	The Wyse 350 is a Wyse 50 with color.
+#	Unfortunately this means that it has magic cookies.
+#	The color attributes are designed to overlap the reverse, dim and
+#	underline attributes.  This is nice for monochrome applications
+#	because you can make underline stuff green (or any other color)
+#	but for true color applications it's not so hot because you cannot
+#	mix color with reverse, dim or underline.
+#	    To further complicate things one of the attributes must be
+#	black (either the foreground or the background).  In reverse video
+#	the background changes color with black letters.  In normal video
+#	the foreground changes colors on a black background.  
+#	    This terminfo uses some of the more advanced features of curses
+#	to display both color and blink.  In the final analysis I am not
+#	sure that the wy350 runs better with this terminfo than it does
+#	with the wy50 terminfo (with user adjusted colors).
+#
+#	The mandatory pause used by flash does not work with
+#	older versions of terminfo.  If you see this effect then
+#	unset xon and delete the / from the delay.
+#	i.e. change $<100/> to $<100>
+#
+# Bug: The <op> capability resets attributes.
+wy350|wyse350|Wyse 350, 
+	am, bw, hs, mc5i, mir, xon, 
+	colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8, 
+	wsl#45, xmc#1, 
+	acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 
+	cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, 
+	cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>, 
+	dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET, 
+	flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, 
+	il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>, 
+	is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI, 
+	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 
+	ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, 
+	kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 
+	kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 
+	kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 
+	kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 
+	ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0, 
+	pfx=\Ez%p1%'?'%+%c%p2%s\177, 
+	pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\EG0\E), ri=\Ej, 
+	rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=, 
+	setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%'0'%+%c, 
+	sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%'0'%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 
+	sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002, 
+	smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, 
+	use=adm+sgr, 
+wy350-vb|wyse350-vb|wyse 350 visible bell, 
+	bel@, use=wy350, 
+wy350-w|wyse350-w|wyse 350 132-column, 
+	cols#132, lw#7, nlab#16, wsl#97, 
+	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, use=wy350, 
+wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell, 
+	bel@, 
+	use=wy350-w, 
+#
+#	This terminfo description is untested.
+#	The wyse100 emulates an adm31, so the adm31 entry should work.
+#
+wy100|wyse 100, 
+	hs, mir, 
+	cols#80, lines#24, xmc#1, 
+	bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J, 
+	invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, 
+	kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, 
+	kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{, 
+	rmir=\Er, smir=\Eq, tsl=\EF, 
+	use=adm+sgr, 
+#
+#	The Wyse 120/150 has most of the features of the Wyse 60.
+#	This terminal does not need padding up to 9600 baud!
+#	<msgr> should be set but the clear screen fails when in
+#	alt-charset mode.  Try \EcE\s\s\E+\s if the screen is really clear
+#	then set <msgr>.
+#
+wy120|wyse120|wy150|wyse150|Wyse 120/150, 
+	am, bw, hs, km, mc5i, mir, msgr, xon, 
+	cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, 
+	acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 
+	bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, 
+	cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, 
+	dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, 
+	flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>, 
+	hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, 
+	is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 
+	is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 
+	kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 
+	kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 
+	kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 
+	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 
+	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 
+	kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, 
+	mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, 
+	pfloc=\EZ2%p1%'?'%+%c%p2%s\177, 
+	pfx=\EZ1%p1%'?'%+%c%p2%s\177, 
+	pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, 
+	rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11, 
+	rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, 
+	rs3=\EwG\Ee($<100>, 
+	sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%'0'%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 
+	sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 
+	smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 
+	tbc=\E0, tsl=\EF, 
+	use=adm+sgr, 
+#
+wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column, 
+	cols#132, lw#7, nlab#16, wsl#97, 
+	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, 
+	rs2=\E`;$<70>, use=wy120, 
+#
+wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines, 
+	lh@, lines#25, lw@, nlab@, 
+	pln@, rs3=\EwG\Ee)$<100>, use=wy120, 
+#
+wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines, 
+	lh@, lines#25, lw@, nlab@, 
+	pln@, rs3=\EwG\Ee)$<100>, use=wy120-w, 
+#
+wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell, 
+	bel@, 
+	use=wy120, 
+#
+wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell, 
+	bel@, 
+	use=wy120-w, 
+#
+#	The Wyse 60 is like the Wyse 50 but with more padding.
+#	The reset strings are slow and the pad times very depending
+#	on other parameters such as font loading.  I have tried
+#	to follow the following outline:
+#
+#		<rs1> -> set personality
+#		<rs2> -> set number of columns
+#		<rs3> -> set number of lines
+#		<is1> -> select the proper font
+#		<is2> -> do the initialization
+#		<is3> -> set up display memory (2 pages)
+#
+#	The Wyse 60's that have vt100 emulation are slower than the
+#	older Wyse 60's.  This change happened mid-1987.
+#	The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
+#
+#	The meta key is only half right.  This terminal will return the
+#	high order bit set when you hit CTRL-function_key
+#
+#	It may be useful to assign two function keys with the
+#	values  \E=(\s  look at old data in page 1
+#	        \E=W,   look at bottom of page 1
+#	where \s is a space ( ).
+#
+#	Note:
+#	   The Wyse 60 runs faster when the XON/XOFF
+#	   handshake is turned off.
+#
+# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
+# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
+wy60|wyse60|Wyse 60, 
+	am, bw, hs, km, mc5i, mir, msgr, 
+	cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45, 
+	acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 
+	bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>, 
+	cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r, 
+	ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, 
+	home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>, 
+	ip=$<3>, is1=\EcB0\EcC1, 
+	is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 
+	is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 
+	kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 
+	kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 
+	kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 
+	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 
+	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 
+	kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, 
+	mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, 
+	pfloc=\EZ2%p1%'?'%+%c%p2%s\177, 
+	pfx=\EZ1%p1%'?'%+%c%p2%s\177, 
+	pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, 
+	rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er, 
+	rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>, 
+	rs2=\EeG$<150>, rs3=\EwG\Ee($<200>, 
+	sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%'0'%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 
+	sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 
+	smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 
+	tbc=\E0, tsl=\EF, 
+	use=adm+sgr, 
+#
+wy60-w|wyse60-w|wyse 60 132-column, 
+	cols#132, lw#7, nlab#16, wsl#97, 
+	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>, 
+	rs2=\EeF$<150>\E`;$<150>, use=wy60, 
+#
+wy60-25|wyse60-25|wyse 60 80-column 25-lines, 
+	lh@, lines#25, lw@, nlab@, 
+	pln@, rs3=\EwG\Ee)$<200>, use=wy60, 
+wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines, 
+	lh@, lines#25, lw@, nlab@, 
+	pln@, rs3=\EwG\Ee)$<200>, use=wy60-w, 
+#
+wy60-42|wyse60-42|wyse 60 80-column 42-lines, 
+	lines#42, 
+	clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>, 
+	dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>, 
+	ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>, 
+	ri=\Ej$<10>, rs3=\Ee*$<150>, 
+	use=wy60, 
+wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines, 
+	cols#132, lw#7, nlab#16, wsl#97, 
+	clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>, 
+	dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>, 
+	nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, 
+	use=wy60-42, 
+#
+wy60-43|wyse60-43|wyse 60 80-column 43-lines, 
+	lh@, lines#43, lw@, nlab@, 
+	pln@, rs3=\Ee+$<150>, use=wy60-42, 
+wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines, 
+	lh@, lines#43, lw@, nlab@, 
+	pln@, rs3=\Ee+$<150>, use=wy60-42-w, 
+#
+wy60-vb|wyse60-vb|Wyse 60 visible bell, 
+	bel@, use=wy60, 
+wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell, 
+	bel@, 
+	use=wy60-w, 
+
+#	The Wyse-99GT looks at lot like the Wyse 60 except that it
+#	does not have the 42/43 line mode.  In the Wyse-60 the "lines"
+#	setup parameter controls the number of lines on the screen.
+#	For the Wyse 99GT the "lines" setup parameter controls the
+#	number of lines in a page.  The screen can display 25 lines max.
+#	    The Wyse-99GT also has personalities for the VT220 and
+#	Tektronix 4014.  But this has no bearing on the native mode.
+#
+#	(msgr) should be set but the clear screen fails when in
+#	alt-charset mode.  Try \EcE\s\s\E+\s if the screen is really clear
+#	then set msgr, else use msgr@.
+#
+#	u0 -> enter Tektronix mode
+#	u1 -> exit Tektronix mode
+#
+wy99gt|wyse99gt|Wyse 99gt, 
+	msgr@, 
+	clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>, 
+	el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>, 
+	il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@, 
+	ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1, 
+	u0=\E~>\E8, u1=\E[42h, 
+	use=wy60, 
+#
+wy99gt-w|wyse99gt-w|wyse 99gt 132-column, 
+	cols#132, lw#7, nlab#16, wsl#97, 
+	clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>, 
+	dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>, use=wy99gt, 
+#
+wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines, 
+	lh@, lines#25, lw@, nlab@, 
+	pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt, 
+#
+wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines, 
+	lh@, lines#25, lw@, nlab@, 
+	pln@, rs2=\E`;$<150>, use=wy99gt-w, 
+#
+wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell, 
+	bel@, use=wy99gt, 
+#
+wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell, 
+	bel@, 
+	use=wy99gt-w, 
+#
+#	The Wyse 160 is combination of the WY-60 and the WY-99gt.
+#	The reset strings are slow and the pad times very depending
+#	on other parameters such as font loading.  I have tried
+#	to follow the following outline:
+#
+#		<rs1> -> set personality
+#		<rs2> -> set number of columns
+#		<rs3> -> set number of lines
+#		<is1> -> select the proper font
+#		<is2> -> do the initialization
+#		<is3> -> set up display memory (2 pages)
+#
+#	The display memory may be used for either text or graphics.
+#	When "Display Memory = Shared" the terminal will have more pages
+#	but garbage may be left on the screen when you switch from
+#	graphics to text.  If "Display Memory = Unshared" then the
+#	text area will be only one page long.
+#
+# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
+# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
+wy160|wyse160|Wyse 160, 
+	am, bw, hs, km, mc5i, mir, msgr, 
+	cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38, 
+	acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 
+	bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>, 
+	cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>, 
+	dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>, 
+	el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I, 
+	hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1, 
+	is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 
+	is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 
+	kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 
+	kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 
+	kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 
+	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 
+	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 
+	kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, 
+	mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>, 
+	pfloc=\EZ2%p1%'?'%+%c%p2%s\177, 
+	pfx=\EZ1%p1%'?'%+%c%p2%s\177, 
+	pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\E), ri=\Ej$<1>, 
+	rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er, 
+	rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>, 
+	rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>, 
+	sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%'0'%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 
+	sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 
+	smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 
+	tbc=\E0, tsl=\EF, 
+	use=adm+sgr, 
+#
+wy160-w|wyse160-w|wyse 160 132-column, 
+	cols#132, lw#7, nlab#16, wsl#90, 
+	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>, 
+	rs2=\EeF$<150>\E`;$<150>, use=wy160, 
+#
+wy160-25|wyse160-25|wyse 160 80-column 25-lines, 
+	lh@, lines#25, lw@, nlab@, 
+	pln@, rs3=\EwG\Ee)$<200>, use=wy160, 
+wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines, 
+	lh@, lines#25, lw@, nlab@, 
+	pln@, rs3=\EwG\Ee)$<200>, use=wy160-w, 
+#
+wy160-42|wyse160-42|wyse 160 80-column 42-lines, 
+	lines#42, 
+	clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>, 
+	ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>, 
+	rs3=\Ee*$<150>, 
+	use=wy160, 
+wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines, 
+	cols#132, lw#7, nlab#16, wsl#90, 
+	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>, 
+	rs2=\EeF$<150>\E`;$<150>, 
+	use=wy160-42, 
+#
+wy160-43|wyse160-43|wyse 160 80-column 43-lines, 
+	lh@, lines#43, lw@, nlab@, 
+	pln@, rs3=\Ee+$<150>, use=wy160-42, 
+wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines, 
+	lh@, lines#43, lw@, nlab@, 
+	pln@, rs3=\Ee+$<150>, use=wy160-42-w, 
+#
+wy160-vb|wyse160-vb|Wyse 160 visible bell, 
+	bel@, use=wy160, 
+wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell, 
+	bel@, 
+	use=wy160-w, 
+#
+#	The Wyse 75 is a vt100 lookalike without advanced video.
+#
+#	   The Wyse 75 can support one attribute (e.g. Dim, Inverse,
+#	Underline) without magic cookies.  The following description
+#	uses this capability, but when more than one attribute is
+#	put on the screen at once, all attributes will be changed
+#	to be the same as the last attribute given.
+#	   The Wyse 75 can support more attributes when used with magic
+#	cookies.  The wy75-mc terminal description uses magic cookies
+#	to correctly handle multiple attributes on a screen.
+#
+wy75|wyse75|wyse 75, 
+	am, hs, mc5i, mir, msgr, xenl, xon, 
+	cols#80, lines#24, ma#1, pb#1201, wsl#78, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>, 
+	cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>, 
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, 
+	dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>, 
+	dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001, 
+	ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, 
+	enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A, 
+	home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 
+	ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, 
+	ind=\n$<2>, ip=$<1>, 
+	is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h, 
+	is2=\E>\E(B\E)0\017, is3=\E[m, ka1=\EOw, ka3=\EOy, 
+	kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, kent=\EOM, 
+	kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 
+	kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 
+	kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i, 
+	kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M, 
+	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 
+	khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~, 
+	kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i, 
+	mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O, 
+	rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, 
+	rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l, 
+	sc=\E7, 
+	sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;, 
+	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 
+	smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m, 
+	tbc=\E[3g, tsl=\E[>\,\001, 
+#
+#	This terminal description uses the non-hidden attribute mode
+#	(with magic cookie).
+#
+wy75-mc|wyse75-mc|wyse 75 with magic cookies, 
+	msgr@, 
+	ma@, xmc#1, 
+	blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p, 
+	rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p, 
+	sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;, 
+	sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p, 
+	use=wy75, 
+wy75-vb|wyse75-vb|wyse 75 with visible bell, 
+	pb@, 
+	bel@, use=wy75, 
+wy75-w|wyse75-w|wyse 75 in 132 column mode, 
+	cols#132, wsl#130, 
+	rs2=\E[35h\E[?3h$<80>, use=wy75, 
+wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns, 
+	pb@, 
+	bel@, use=wy75-w, 
+#
+#	Wyse 85 emulating a vt220 7 bit mode.
+#		24 line screen with status line.
+#
+#	The vt220 mode permits more function keys but it wipes out
+#	the escape key.  I strongly recommend that <f11> be set to
+#	escape (esc).
+#	The terminal may have to be set for 8 data bits and 2 stop
+#	bits for the arrow keys to work.
+#	The Wyse 85 runs faster with XON/XOFF enabled.  Also the
+#	<dch> and <ich> work best when XON/XOFF is set.  <ich> and
+#	<dch> leave trash on the screen when used without XON/XOFF.
+#
+wy85|wyse85|wyse 85, 
+	am, hs, mc5i, mir, msgr, xenl, xon, 
+	cols#80, it#8, lines#24, wsl#80, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 
+	clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 
+	dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, 
+	dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, 
+	ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, 
+	enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, 
+	fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, 
+	ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, 
+	ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, 
+	is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, 
+	is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu, 
+	kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf1=\EOP, 
+	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 
+	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 
+	kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, 
+	kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
+	kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~, 
+	knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, 
+	lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, 
+	ri=\EM$<3>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, 
+	rmso=\E[m, rmul=\E[m, rs1=\E[13l\E[3l\E!p, 
+	rs2=\E[35h\E[?3l$<70>, rs3=\E[?5l, sc=\E7, 
+	sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 
+	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 
+	smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
+	tsl=\E[40h\E7\E[25;%i%p1%dH, 
+#
+#	Wyse 85 with visual bell.
+wy85-vb|wyse85-vb|wyse 85 with visible bell, 
+	bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85, 
+#
+#	Wyse 85 in 132-column mode.
+wy85-w|wyse85-w|wyse 85 in 132-column mode, 
+	cols#132, wsl#132, 
+	rs2=\E[35h\E[?3h$<70>, use=wy85, 
+#
+#	Wyse 85 in 132-column mode with visual bell.
+wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns, 
+	bel@, 
+	use=wy85-w, 
+#
+#	Wyse 185 emulating a vt320 7 bit mode.
+#
+#	This terminal always displays 25 lines.  These lines may be used
+#	as 24 data lines and a terminal status line (top or bottom) or
+#	25 data lines.  The 48 and 50 line modes change the page size
+#	and not the number of lines on the screen.
+#
+#	The Compose Character key can be used as a meta key if changed
+#	by set-up.
+#
+wy185|wyse185|wyse 185, 
+	am, hs, km, mc5i, mir, msgr, xenl, xon, 
+	cols#80, it#8, lines#24, wsl#80, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 
+	clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>, 
+	dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, 
+	dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>, 
+	el=\E[K, el1=\E[1K, enacs=\E)0, 
+	flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8, 
+	home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH, 
+	ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>, 
+	ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, 
+	is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h, 
+	is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu, 
+	kbs=^H, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D, 
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, 
+	kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 
+	kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 
+	kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, 
+	kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, 
+	kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, 
+	khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 
+	kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, 
+	mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<2>, 
+	rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, rmkx=\E>, 
+	rmso=\E[27m, rmul=\E[24m, 
+	rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, 
+	rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, 
+	sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 
+	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, 
+	smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, 
+	tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd, 
+#
+#	Wyse 185 with 24 data lines and top status (terminal status)
+wy185-24|wyse185-24|wyse 185 with 24 data lines, 
+	hs@, 
+	dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy185, 
+#
+#	Wyse 185 with visual bell.
+wy185-vb|wyse185-vb|wyse 185+flash, 
+	bel@, use=wy185, 
+#
+#	Wyse 185 in 132-column mode.
+wy185-w|wyse185-w|wyse 185 in 132-column mode, 
+	cols#132, wsl#132, 
+	dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 
+	ip=$<7>, rs2=\E[35h\E[?3h, 
+	use=wy185, 
+#
+#	Wyse 185 in 132-column mode with visual bell.
+wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols, 
+	bel@, use=wy185-w, 
+
+# wy325 terminfo entries
+# Done by Joe H. Davis        3-9-92
+
+# lines 25  columns 80
+#
+wy325|wyse325|Wyse epc, 
+	am, bw, hs, mc5i, mir, 
+	cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, 
+	acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 
+	bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, 
+	cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, 
+	dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, 
+	flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, 
+	il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, 
+	is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 
+	is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 
+	kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 
+	kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 
+	kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 
+	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 
+	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, 
+	kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, 
+	mc0=\EP, mc4=^T, mc5=\Ed#, 
+	pfloc=\EZ2%p1%'?'%+%c%p2%s\177, 
+	pfx=\EZ1%p1%'?'%+%c%p2%s\177, 
+	pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, 
+	rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11, 
+	rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, 
+	rs3=\EwG\Ee($<100>, 
+	sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%'0'%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 
+	sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 
+	smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0, 
+	tsl=\EF, 
+	use=adm+sgr, 
+
+#
+# lines 24  columns 80  vb 
+#
+wy325-vb|wyse325-vb|wyse-325 with visual bell, 
+	bel@, use=wy325, 
+
+#
+# lines 24  columns 132
+#
+wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode, 
+	cols#132, lw#7, nlab#16, wsl#97, 
+	cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, 
+	rs2=\E`;$<70>, use=wy325, 
+#
+# lines 25  columns 80
+#
+wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines, 
+	lh@, lines#25, lw@, nlab@, 
+	pln@, rs3=\EwG\Ee)$<100>, use=wy325, 
+#
+# lines 25  columns 132
+#
+wy325-25w|wyse325-25w|wy325 132 columns, 
+	lh@, lines#25, lw@, nlab@, 
+	pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 
+#
+# lines 25  columns 132  vb 
+#
+wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video, 
+	bel@, 
+	use=wy325-w, 
+
+#
+# lines 42  columns 80
+#
+wy325-42|wyse325-42|wyse-325 42 lines, 
+	lh@, lines#42, lw@, nlab@, 
+	pln@, rs3=\EwG\Ee)$<100>, use=wy325, 
+#
+# lines 42  columns 132
+#
+wy325-42w|wyse325-42w|wyse-325 42 lines wide mode, 
+	lh@, lines#42, lw@, nlab@, 
+	pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 
+#
+# lines 42  columns 132  vb 
+#
+wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell, 
+	bel@, 
+	use=wy325-w, 
+#
+# lines 43  columns 80
+#
+wy325-43|wyse325-43|wyse-325 43 lines, 
+	lh@, lines#43, lw@, nlab@, 
+	pln@, use=wy325, 
+#
+# lines 43  columns 132
+#
+wy325-43w|wyse325-43w|wyse-325 43 lines wide mode, 
+	lh@, lines#43, lw@, nlab@, 
+	pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 
+#
+# lines 43  columns 132  vb 
+#
+wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell, 
+	bel@, 
+	use=wy325-w, 
+
+#	Wyse 370 -- 24 line screen with status line.
+#
+#	The terminal may have to be set for 8 data bits and 2 stop
+#	bits for the arrow keys to work.
+#
+#	If you change keyboards the terminal will send different
+#	escape sequences.
+#	The following definition is for the basic terminal without
+#	function keys.
+#
+#	<u0> -> enter Tektronix 4010/4014 mode
+#	<u1> -> exit  Tektronix 4010/4014 mode
+#	<u2> -> enter ASCII mode (from any ANSI mode)
+#	<u3> -> exit  ASCII mode (goto native ANSI mode)
+#	<u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
+#	<u5> -> exit  Tek 4207 mode (goto native ANSI mode)
+#
+# Bug: The <op> capability resets attributes.
+wy370-nk|wyse 370 without function keys, 
+	am, ccc, hs, mc5i, mir, msgr, xenl, xon, 
+	colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 
+	clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 
+	cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>, 
+	dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, 
+	dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>, 
+	el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0, 
+	flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8, 
+	home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH, 
+	ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, 
+	ind=\n$<2>, 
+	initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw, 
+	invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>, 
+	is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h, 
+	is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i, 
+	mc5=\E[5i, 
+	oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w, 
+	op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, 
+	rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l, 
+	rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 
+	rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>, 
+	rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw, 
+	sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 
+	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, 
+	smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, 
+	tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH, 
+	u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B, 
+	u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd, 
+#
+#	Function key set for the ASCII (wy-50 compatible) keyboard
+#	This is the default 370.
+#
+wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard, 
+	kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
+	kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i, 
+	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 
+	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i, 
+	kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, 
+	kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP, 
+	knp=\E[U, kpp=\E[V, 
+	use=wy370-nk, 
+#
+#	Function key set for the VT-320 (and wy85) compatible keyboard
+#
+wy370-105k|Wyse 370 with 105 key keyboard, 
+	ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	kdch1=\E[3~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 
+	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 
+	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 
+	kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 
+	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 
+	khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, 
+	kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, 
+	use=wy370-nk, 
+#
+#	Function key set for the PC compatible keyboard
+#
+wy370-EPC|Wyse 370 with 102 key keyboard, 
+	kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
+	kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~, 
+	kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
+	kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
+	khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, 
+	use=wy370-nk, 
+#
+#	Wyse 370 with visual bell.
+wy370-vb|Wyse 370 with visible bell, 
+	bel@, use=wy370, 
+#
+#	Wyse 370 in 132-column mode.
+wy370-w|Wyse 370 in 132-column mode, 
+	cols#132, wsl#132, 
+	rs2=\E[35h\E[?3h$<70>, use=wy370, 
+#
+#	Wyse 370 in 132-column mode with visual bell.
+wy370-wvb|Wyse 370 with visible bell 132-columns, 
+	flash=\E[30h\E\,\E[30l$<300>, 
+	use=wy370-w, 
+wy370-rv|Wyse 370 reverse video, 
+	rs3=\E[32h\E[?5h, use=wy370, 
+#
+#	Wyse 99gt Tektronix 4010/4014 emulator,
+#
+wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator, 
+	am, os, 
+	cols#74, lines#35, 
+	bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, 
+	cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, 
+	cuu1=^K, ff=^L, 
+	hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, 
+	home=^]7`x @\037, 
+	hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, 
+	is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h, 
+#
+#	Wyse 160 Tektronix 4010/4014 emulator,
+#
+wy160-tek|Wyse 160 Tektronix 4010/4014 emulator, 
+	cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, 
+	home=^]8`g @\037, 
+	use=wy99gt-tek, 
+#
+#	Wyse 370 Tektronix 4010/4014 emulator,
+#
+wy370-tek|Wyse 370 Tektronix 4010/4014 emulator, 
+	am, os, 
+	cols#80, lines#36, 
+	bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, 
+	cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037, 
+	cuu1=^K, ff=^L, 
+	hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, 
+	home=^]8g @\037, 
+	hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, 
+	is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K, 
+	nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0, 
+
+# Vendor-supplied Wyse entries end here.
+
+# Can't set tabs! Other bugs (ANSI mode only):
+# - can't redefine function keys (anyway, key redefinition in ANSI mode
+#   is too much complex to be described);
+# - meta key can't be described (the terminal forgets it when reset);
+# The xon-xoff handshaking can't be disabled while in ansi personality, so
+# emacs can't work at speed greater than 9600 baud.  No padding is needed at
+# this speed.
+#   dch1 has been commented out because it causes annoying glittering when
+# vi deletes one character at the beginning of a line with tabs in it.
+#   dch makes sysgen(1M) have a horrible behaviour when deleting
+# a screen and makes screen(1) behave badly, so it is disabled too. The nice
+# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
+# not, so smir and rmir are commented out as well.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
+	am, km, mc5i, mir, msgr, xenl,
+	cols#80, it#8, lines#25, vt#3,
+	acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
+	bel=^G, blink=\e[5m, bold=\e[1m, cbt=\e[Z, civis=\e[?25l,
+	clear=\e[H\e[J$<200>, cnorm=\e[34h\e[?25h, cr=\r,
+	csr=\e[%i%p1%d;%p2%dr, cub=\e[%p1%dD$<1>, cub1=\b$<1>,
+	cud=\e[%p1%dB, cud1=\eD, cuf=\e[%p1%dC$<1>, cuf1=\e[C$<1>,
+	cup=\e[%i%p1%d;%p2%dH, cuu=\e[%p1%dA, cuu1=\eM,
+	cvvis=\e[34l\e[?25h, .dch=\e[%p1%dP, .dch1=\e[P, dl=\e[%p1%dM,
+	dl1=\e[M, dim=\e[2m, ech=\e[%p1%dX, ed=\e[J$<8*>, el=\e[K$<1>,
+	el1=\e[1K$<1>, enacs=\e)0, flash=\e[?5h$<30/>\e[?5l,
+	home=\e[H, ht=\t, .hts=\eH, hpa=\e[%i%p1%dG, ich=\e[%p1%d@,
+	il=\e[%p1%dL, il1=\e[L, ind=\n$<1>, invis=\e[8m,
+	is2=\e7\e[1r\e8\e[2;3;4;13;20;34;39;36l\e[12;16;34h\e[?1;3;4;5;10;18l\e[?7;8;25h\e>\e[?5W\e(B^O\e[4i,
+	kbs=\b,      kcbt=\e[z,   kcub1=\eOD,  kcud1=\eOB,
+	kcuf1=\eOC,  kcuu1=\eOA,  kf1=\eOP,
+	kf10=\e[21~, kf11=\e[23~, kf12=\e[24~, kf17=\e[K,   kf18=\e[31~,
+	kf19=\e[32~, kf20=\e[33~, kf21=\e[34~, kf22=\e[35~, kf23=\e[1~,
+	kf24=\e[2~,  kf2=\eOQ,    kf3=\eOR,    kf4=\eOS,    kf5=\e[M,
+	kf6=\e[17~,  kf7=\e[18~,  kf8=\e[19~,  kf9=\e[20~,
+	ll=\e[24E, mc0=\e[?19h, mc4=\e[4i, mc5=\e[5i, nel=\eE,
+	prot=\e[1"q, rc=\e8, rev=\e[7m, ri=\eM, rmacs=^O, rmam=\e[?7l,
+	rmir=\e[4l, rmkx=\e[?1l, rmso=\e[27m, rmul=\e[24m,
+	rs2=\e[61"p\e[40h\e[?6l\e[1r\e[2;3;4;13;20;34;39;36l\e[12;16;34h\e[?1;3;4;5;10;18l\e[?7;8;25h\e>\e[?5W\e(B^O\e[24E\e[4i,
+	sc=\e7,
+	sgr=\e[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\e[%?%p8%t1%;"q%?%p9%t^N%e^O%;,
+	sgr0=\e[m^O\e["q, smam=\e[?7h,  smacs=^N,
+	smir=\e[4h, smkx=\e[?1h, smso=\e[7m, smul=\e[4m,
+	.tbc=\e[3g, vpa=\e[%i%p1%dd,
+
+#   This is the american terminal. Here tabs work fine.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
+	hts=\eH, tbc=\e[3g, is3=\e[?5l, rs3=\e[?5l, use=wy99-ansi,
+
+# This terminal (firmware version 02) has a lot of bugs:
+# - can't set tabs;
+# - other bugs in ANSI modes (see above).
+# This description disables handshaking when using cup. This is because
+# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
+# cannot be used at speeds greater than 9600 baud, because at greater
+# speeds handshaking is needed even for character sending. If you use
+# DTR handshaking, you can use even greater speeds.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
+	am, bw, hs, km, mc5i, mir, msgr, xon,
+	cols#80, it#8, lines#25, wsl#46,
+	acsc=+y'x.wI~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=,
+	bel=^G, blink=\eG2, cbt=\eI, civis=\e`0, clear=\e'\e(^Z,
+	cnorm=\e`4\e`1, cr=\r, cub1=\b, cud1=\ej, cuf1=\f,
+	cup=\e=%p1%'\s'%+%c%p2%'\s'%+%c, cuu1=^K, cvvis=\e`2\e`1,
+	dch1=\eW, dim=\eGp, dl1=\eR, dsl=\eF\r, ed=\eY$<8*>, el=\eT$<8>,
+	enacs=\ec@1J$<2000>, flash=\e\^1$<30/>\e\^0, fsl=\r,
+	home=^^, ht=\t, .hts=/e1, il1=\eE, ind=\n,
+	is2=\eu\ee6\eC\eDF\ec21\ec31\ec62\ec72\ee;^N\e'\eeL\e`9\e\^0\e`1\e`4\ee.\e`:\ee1\eG0\e(\ed/\ee4\ed*\eO\e`I\er\ee"\ecD^T,
+	ka1=^^, ka3=\eJ, kbs=\b, kcbt=\eI, kc1=\eT, kc3=\eK,
+	kcub1=\b, kcud1=\n, kcuf1=\f, kcuu1=^K,
+	kf1=\001@\r,  kf10=\001I\r, kf11=\001J\r, kf12=\001K\r,
+	kf13=\001`\r, kf14=\001a\r, kf15=\001b\r, kf16=\001c\r,
+	kf17=\001d\r, kf18=\001e\r, kf19=\001f\r, kf2=\001A\r,
+	kf20=\001g\r, kf21=\001h\r, kf22=\001i\r, kf23=\001j\r,
+	kf24=\001k\r, kf3=\001B\r,  kf4=\001C\r,  kf5=\001D\r,
+	kf6=\001E\r,  kf7=\001F\r,  kf8=\001G\r,  kf9=\001H\r,
+	kprt=\eP,
+	invis=\eG3, mc0=\eP, mc4=^T, mc5=\ed#, nel=^_, prot=\e),
+	ri=\ej, rev=\eG4, rmacs=\ecD, rmam=\ed., rmcup=\ec21\ec31,
+	rmir=\er, rmso=\eG0, rmxon=\ec20\ec30,
+	rs2=\eu\e~4\ee6\eC\eDF\ec21\ec31\ec62\ec72\ee;^N\e'\eeL\e`9\e\^0\e`1\e`4\ee.\e`:\ee)\ew\ewG\ew0\ee1\eG0\e(\ed/\ee4\ed*\eO\e`I\er\ee"\ec@0B\ecD^T,
+	sgr=\e(\eG%'0'%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\e)%;%?%p9%t\ecE%e\ecD%;,
+	sgr0=\e(\eG0, smacs=\ecE, smam=\ed/, smcup=\ec20\ec30,
+	smir=\eq, smso=\eG4, smxon=\ec21\ec31, .tbc=\e0,
+	tsl=\eF,
+
+# This is the american terminal. Here tabs work.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
+	hts=\e1, tbc=\e0, use=wy99f,
+
+#
+#TITLE:  TERMINFO ENTRY WY520
+#DATE:   8/5/93
+# The WY520 terminfo is based on the WY285 entry published on the WYSE 
+# BBS with the addition of more function keys and special keys.
+#
+#               rs1 -> set personality
+#               rs2 -> set number of columns
+#               rs3 -> set number of lines
+#               is1 -> select the proper font
+#               is2 -> do the initialization
+#               is3 -> If this string is empty then rs3 gets sent.
+#
+#       Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
+#       - The BS key is programmed to generate BS in smcup since
+#         is2 doesn't seem to work.
+#       - Remove and shift/Remove: delete a character
+#       - Insert : enter insert mode
+#       - Find   : delete to end of file
+#       - Select : clear a line
+#       - F11, F12, F13: send default sequences (not ESC, BS, LF)
+#       - F14 : Home key
+#       - Bottom status line (host writable line) is used.
+#       - smkx,rmkx are removed because this would put the numeric
+#         keypad in Dec application mode which doesn't seem to work
+#         with SCO applications.
+#
+wy520|wyse520|wyse 520, 
+	am, hs, km, mc5i, mir, xenl, xon, 
+	cols#80, it#8, lines#24, wsl#80, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 
+	clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>, 
+	dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~, 
+	ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K, 
+	enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, 
+	hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, 
+	il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, 
+	is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h, 
+	is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOu, kb2=\EOy, 
+	kbs=^H, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D, 
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~, 
+	kel=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 
+	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 
+	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 
+	kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 
+	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 
+	khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, 
+	kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, 
+	mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, 
+	ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, 
+	rmso=\E[m, rmul=\E[24m, 
+	rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, 
+	rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, 
+	sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 
+	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, 
+	smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m, 
+	tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`, 
+	vpa=\E[%i%p1%dd, 
+#
+#       Wyse 520 with 24 data lines and status (terminal status)
+wy520-24|wyse520-24|wyse 520 with 24 data lines, 
+	hs@, 
+	dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520, 
+#
+#       Wyse 520 with visual bell.
+wy520-vb|wyse520-vb|wyse 520 with visible bell, 
+	flash=\E[30h\E\054\E[30l$<100>, use=wy520, 
+#
+#       Wyse 520 in 132-column mode.
+wy520-w|wyse520-w|wyse 520 in 132-column mode, 
+	cols#132, wsl#132, 
+	dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 
+	ip=$<7>, rs2=\E[35h\E[?3h, 
+	use=wy520, 
+#
+#       Wyse 520 in 132-column mode with visual bell.
+wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns, 
+	flash=\E[30h\E\054\E[30l$<100>, 
+	use=wy520-w, 
+#
+#
+#       Wyse 520 emulating a vt420 7 bit mode.
+#       The DEL key is programmed to generate BS in is2.
+#       With EPC keyboard.
+#       - 'End' key will clear till end of line on EPC keyboard
+#       - Shift/End : ignored.
+#       - Insert : enter insert mode.
+#       - Delete : delete a character (have to change interrupt character
+#                  to CTRL-C: stty intr '^c') for it to work since the
+#                  Delete key sends 7FH.
+wy520-epc|wyse520-epc|wyse 520 with EPC keyboard, 
+	kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~, 
+	kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H, 
+	use=wy520, 
+#
+#       Wyse 520 with 24 data lines and status (terminal status)
+#       with EPC keyboard.
+wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines, 
+	hs@, 
+	dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520-epc, 
+#
+#       Wyse 520 with visual bell.
+wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell, 
+	flash=\E[30h\E\054\E[30l$<100>, 
+	use=wy520-epc, 
+#
+#       Wyse 520 in 132-column mode.
+wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard, 
+	cols#132, wsl#132, 
+	dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 
+	ip=$<7>, rs2=\E[35h\E[?3h, 
+	use=wy520-epc, 
+#
+#       Wyse 520 in 132-column mode with visual bell.
+wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns, 
+	flash=\E[30h\E\054\E[30l$<100>, 
+	use=wy520-epc-w, 
+#
+#       Wyse 520 in 80-column, 36 lines
+wy520-36|wyse520-36|wyse 520 with 36 data lines, 
+	hs@, 
+	lines#36, 
+	dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, use=wy520, 
+#
+#       Wyse 520 in 80-column, 48 lines
+wy520-48|wyse520-48|wyse 520 with 48 data lines, 
+	hs@, 
+	lines#48, 
+	dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, use=wy520, 
+#
+#       Wyse 520 in 132-column, 36 lines
+wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines, 
+	cols#132, wsl#132, 
+	rs2=\E[?3h, 
+	rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36, 
+#
+#       Wyse 520 in 132-column, 48 lines
+wy520-48w|wyse520-48w|wyse 520 with 48 data lines, 
+	cols#132, wsl#132, 
+	rs2=\E[?3h, 
+	rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48, 
+#
+#
+#       Wyse 520 in 80-column, 36 lines with EPC keyboard
+wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard, 
+	hs@, 
+	lines#36, 
+	dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, use=wy520-epc, 
+#
+#       Wyse 520 in 80-column, 48 lines with EPC keyboard
+wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard, 
+	hs@, 
+	lines#48, 
+	dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, use=wy520-epc, 
+#
+#       Wyse 520 in 132-column, 36 lines with EPC keyboard
+wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard, 
+	cols#132, wsl#132, 
+	rs2=\E[?3h, 
+	rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36pc, 
+#
+#       Wyse 520 in 132-column, 48 lines with EPC keyboard
+wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines, 
+	cols#132, wsl#132, 
+	rs2=\E[?3h, 
+	rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48pc, 
+
+# From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
+# (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
+# file and we don't know what <hts> is -- esr)
+wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on, 
+	am, OTbs,
+	cols#80, it#8, lines#24, 
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW, 
+	dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J, 
+	is2=\E`\072\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, 
+	kcuf1=^F, kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, 
+	rmir=\Er, rmso=^O, rmul=^O, sgr0=^O, rs1=\E`\072\E`9\017\Er, 
+	smir=\Eq, smso=^N, smul=^N, 
+
+wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad, 
+	is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=, 
+	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 
+	kcuu1=\EOA, khome=\EOH,
+	rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>, use=wy75,
+
+# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
+wy100q|Wyse 100 for Quotron, 
+	cols#80, lines#24, xmc#1, OTbs,
+	cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, 
+	is2=\E`\072\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, 
+	kcud1=^J, kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, 
+	invis@, use=adm+sgr,
+
+#### Kermit terminal emulations
+#
+# Obsolete Kermit versions may be listed in the section describing obsolete
+# non-ANSI terminal emulators later in the file.
+#
+
+# KERMIT standard all versions.
+# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
+# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
+# From: greg small <gts@populi.berkeley.edu> 9-25-84
+kermit|standard kermit, 
+	cols#80, lines#24, OTbs,
+	clear=\EE, cub1=^H, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 
+	el=\EK, home=\EH, 
+	is2=K0 Standard Kermit  9-25-84\n, kcub1=^H, 
+	kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 
+kermit-am|standard kermit plus auto-margin, 
+	am, 
+	is2=K1 Standard Kermit plus Automatic Margins\n, 
+	use=kermit,
+# IBMPC Kermit 1.2.
+# Bugs: <ed>, <el>: do not work except at beginning of line!  <clear> does
+# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
+# line).
+# From: greg small <gts@populi.berkeley.edu> 8-30-84
+pckermit|pckermit12|UCB IBMPC Kermit 1.2, 
+	am, 
+	lines#25, 
+	clear=\EH\EJ, ed@, el@, 
+	is2=K2 UCB IBMPC Kermit 1.2  8-30-84\n, 
+	use=kermit,
+# IBMPC Kermit 1.20
+# Cannot use line 25, now acts funny like ansi special scrolling region.
+# Initialization must escape from that region by cursor position to line 24.
+# Cannot use character insert because 1.20 goes crazy if insert at col 80.
+# Does not use :am: because autowrap is lost when kermit dropped and restarted.
+# From: greg small <gts@populi.berkeley.edu> 12-19-84
+pckermit120|UCB IBMPC Kermit 1.20, 
+	it#8, lines#24, 
+	cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, 
+	ht=\t, il1=\EL, 
+	is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20  12-19-84\n, 
+	rmir@, rmso=\Eq, smir@, smso=\Ep, 
+	use=kermit,
+# MS-DOS Kermit 2.27 for the IBMPC
+# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
+# Cannot use line 25, now acts funny like ansi special scrolling region.
+# Initialization must escape from that region by cursor position to line 24.
+# Does not use am: because autowrap is lost when kermit dropped and restarted.
+# Reverse video for standout like H19.
+# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
+# From: greg small <gts@populi.berkeley.edu> 3-17-85
+msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC, 
+	am@, OTbs,
+	cols#80, it#8, lines#24, 
+	clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 
+	cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, 
+	el=\EK, home=\EH, ht=\t, il1=\EL, 
+	is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n, 
+	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 
+	rc=\Ek, rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, 
+	smso=\Ep, 
+# MS-DOS Kermit 2.27 with automatic margins
+# From:	greg small <gts@populi.berkeley.edu> 3-17-85
+msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins, 
+	am, 
+	cvvis=\EO\Eq\EG\EvK5, 
+	is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
+	use=msk227,
+# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
+# Automatic margins now default.  Use ansi <sgr> for highlights.
+# Define function keys.
+# (msk22714: removed obsolete ":kn#10:" -- esr)
+# From: greg small <gts@populi.berkeley.edu> 3-17-85
+msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC, 
+	am, 
+	bold=\E[1m, cvvis=\EO\Eq\EG\EvK6, 
+	is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n, 
+	kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, 
+	kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, 
+	rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 
+	smso=\E[1m, smul=\E[4m, use=mskermit227,
+# This was designed for a VT320 emulator, but it is probably a good start
+# at support for the VT320 itself.
+# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
+# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
+vt320-k3|MS-Kermit 3.00's vt320 emulation, 
+	am, eslok, hs, km, mir, msgr, xenl, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	cols#80, it#8, lines#49, pb#9600, vt#3, 
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
+	clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p1%dr, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, 
+	cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p1%dH, 
+	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 
+	dl=\E[%p1%dM, dl1=\E[M, dsl=\E[0$~, ech=\E[%p1%dX, 
+	ed=\E[J, el=\E[K, 
+	flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l, 
+	fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, 
+	hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 
+	is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, 
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	kdl1=\E[3~, kf0=\E[21~, kf1=\EOP, kf2=\EOQ, 
+	kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, 
+	kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~, 
+	kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 
+	nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dL, 
+	rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 
+	rmso=\E[27m, rmul=\E[24m, 
+	rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E4i\E?4i\E[m\E[r\E[2$~, 
+	sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 
+	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
+	tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, 
+# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
+# ACS capabilities from Philippe De Muyter  <phdm@info.ucl.ac.be> 30 May 1996
+# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
+vt320-k311|dec vt320 series as defined by kermit 3.11, 
+	am, eslok, hs, mir, msgr, xenl, xon, 
+	cols#80, it#8, lines#24, vt#3, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
+	clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, 
+	dl=\E[%p1%dM, dl1=\E[M, 
+	dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, 
+	flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, 
+	hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 
+	il1=\E[L$<3/>, ind=\ED, 
+	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 
+	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 
+	kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
+	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
+	lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=^M\ED, 
+	rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, 
+	ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 
+	rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7, 
+	sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, 
+	smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
+	tsl=\E[2$~\E[1$}\E[1;%dH, 
+
+#
+######## ---------------- TERMINFO FILE CAN BE SPLIT HERE -------------------
+# This cut mark helps make life less painful for people running ncurses tic
+# on machines with relatively little RAM.  The file can be broken in half here
+# cleanly and compiled in sections -- no `use' references cross this cut
+# going forward.
+#
+
+######## OLDER TERMINAL TYPES
+#
+# This section is devoted to older commercial terminal brands that are now
+# discontinued, but known to be still in use or represented by emulations.
+#
+
+#### AT&T (att, tty)
+#
+# This section also includes Teletype-branded VDTs.
+#
+# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
+# Boundless Technologies); for details, see the header comment on the ADDS
+# section.
+#
+# These are AT&T's official terminfo entries.  All-caps aliases have been
+# removed.
+#
+att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
+	am, xon, eo, mir, msgr,
+	cols#80, lines#24, it#8,
+	bel=^G,
+	cub=\E[%p1%dD, cub1=\b,
+	cuf=\E[%p1%dC, cuf1=\E[C,
+	cud=\E[%p1%dB, cud1=\n,
+	cuu=\E[%p1%dA, cuu1=\E[A,
+	cup=\E[%i%p1%d;%p2%dH,
+	ich=\E[%p1%d@, 
+	il=\E[%p1%dL, il1=\E[L,
+	dch=\E[%p1%dP, dch1=\E[P,
+	dl=\E[%p1%dM, dl1=\E[M,
+	smso=\E[7m, rmso=\E[m, rev=\E[7m,
+	cr=\r, ind=\n, 
+	ht=\t, smir=\E[4h, rmir=\E[4l,
+	home=\E[H, clear=\E[H\E[J, ed=\E[J, el=\E[K, el1=\E[1K,
+	kf1=\E[1r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r,
+	kf5=\E[5r, kf6=\E[6r, kf7=\E[7r, kf8=\E[8r,
+	kf9=\E[9r, kf10=\E[10r, kf11=\E[11r, kf12=\E[12r,
+	kf13=\E[13r, kf14=\E[14r, kf15=\E[15r, kf16=\E[16r,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	khome=\E[H, kclr=\E[J, kcbt=\E[Z, kbs=\b,
+	kil1=\E[L, kich1=\E[@, kdl1=\E[M, kdch1=\E[P,
+	mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+	sgr0=\E[m, 
+att2350|AT&T 2350 Video Information Terminal 80 column mode,
+	mc0@, mc4@, mc5@, use=att2300,
+
+# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
+# Seems upward compatible with vt100, plus ins/del line/char.
+# On sgr, the protection parameter is ignored.
+# No check is made to make sure that only 3 parameters are output.
+# 	standout= reverse + half-intensity = 3 | 5.
+# 	bold= reverse + underline = 2 | 3.
+# note that half-bright blinking doesn't look different from normal blinking.
+# NOTE:you must program the function keys first, label second!
+# (att4410: a BSD entry has been seen with the following capabilities: 
+# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
+# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
+att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
+	am, hs, mir, msgr, xon,
+	cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+	acsc=``aaffhhggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~00++--\,\,..,
+	is1=\E[?3l\E)0,
+	bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J,
+	cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=\b, cud1=\E[B,
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+	dch1=\E[P, dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K,
+	fsl=\E8, home=\E[H, ht=\t, ich1=\E[@, il1=\E[L,
+	ind=\n, invis=\E[8m,
+	is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s\sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s\s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s\s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q\s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s\s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s\s\s\s\EOW,
+	kbs=\b, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
+	kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
+	kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
+	khome=\E[H, kll=\E[24;1H, ll=\E[24H, nel=\r\n,
+	pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s\s%p2%s,
+	pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
+	rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
+	sc=\E7,
+	sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
+	sgr0=\E[m^O, smacs=^N, smso=\E[7m, smul=\E[4m,
+	tsl=\E7\E[25;%p1%{1}%+%dH,
+
+att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
+	cols#132,is1=\E[?3h\E)0,rs2=\Ec\E[?3h\E[2;0y,wsl#132,use=att5410v1,
+
+att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
+	pfx=\E[%p1%d;%p2%l%02dq   f%p1%d           %p2%s, OTbs,
+	use=att5410v1,
+
+att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
+	cols#132, is1=\E[?3h\E)0,rs2=\Ec\E[?3h\E[2;0y, wsl#132,
+	use=att4410,
+
+# 5410 in terms of a vt100
+# (v5410: added <rmam>/<smam> based on init string -- esr)
+v5410|att5410 in terms of a vt100,
+	am, mir, msgr, xon,
+	cols#80, it#8, lines#24, vt#3,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+	clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+	cub1=\b, cud1=\n, cuf1=\E[C$<2>,
+	cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
+	dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
+	enacs=\E(B\E)0, home=\E[H, ht=\t, hts=\EH, ich1=\E[@,
+	il1=\E[L, ind=\n, ka1=\EOq, ka3=\EOs, kb2=\EOr,
+	kbs=\b, kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB,
+	kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP,
+	kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
+	kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
+	rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmkx=\E[?1l\E>,
+	rmso=\E[m$<2>, rmul=\E[m$<2>,
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;,
+	sgr0=\E[m^O$<2>, smacs=^N, smkx=\E[?1h\E=,
+	smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+	rmam=\E[?7l, smam=\E[?7h, 
+
+# 
+# Teletype Model 5420 -- A souped up 5410, with multiple windows,
+# even! the 5420 has three modes: scroll, window or page mode
+# this terminfo should work in scroll or window mode, but doesn't
+# take advantage of any of the differences between them.
+#
+# Has memory below (2 lines!)
+# 3 pages of memory (plus some spare)
+# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
+# <hpa>, <hts> would work for these, but these work in both scroll and window
+# mode... Unset insert character so insert mode works
+# <is1> sets 80 column mode,
+# <is2> escape sequence:
+# 1) turn off all fonts
+# 2) function keys off, keyboard lock off, control display off,
+#    insert mode off, erasure mode off,
+# 3) full duplex, monitor mode off, send graphics off, nl on lf off
+# 4) reset origin mode
+# 5) set line wraparound
+# 6) exit erasure mode, positional attribute mode, and erasure extent mode
+# 7) clear margins
+# 8) program ENTER to transmit ^J,
+# We use \212 to program the ^J because a bare ^J will get translated by
+# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
+#     1      2            3              4     5     6    7  8
+# <is3> set screen color to black,
+# No representation in terminfo for the delete word key: kdw1=\Ed
+# Key capabilities assume the power-up send sequence...
+# This <rmcup> is not strictly necessary, but it helps maximize 
+# memory usefulness: <rmcup=\Ez>,
+# Alternate sgr0:	<sgr0=\E[m\EW^O>,
+# Alternate sgr:	<sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
+# smkx programs the SYS PF keys to send a set sequence.
+# It also sets up labels f1, f2, ..., f8, and sends edit keys.
+# This string causes them to send the strings <kf1>-<kf8>
+# when pressed in SYS PF mode.
+# (att4415: I added <rmam>/<smam> based on the init string -- esr)
+att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
+	xon, db, mir, OTbs,
+	nlab#8, lh#2, lw#8, wsl#55, lm#78,
+	cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j,
+	cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, cuu=\E[%p1%dA,
+	cup=\E[%i%p1%d;%p2%dx,
+	cvvis=\E[11;1j, dch=\E[%p1%dP, dl=\E[%p1%dM,
+	ech=\E[%p1%ds\E[%p1%dD,
+	flash=\E[?5h$<200>\E[?5l,
+	home=\E[x, hpa=\E[%p1%{1}%+%dG, hts=\EH,
+	ich1@, ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dE,
+	is1=\E[?3l$<100>,
+	is2=\E[m^O\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
+	is3=\E[?5l,
+	kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
+	kel=\E[2K, kend=\Ez, kent=\Eent,
+	kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf,
+	kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
+	kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu,
+	knp=\E[U, kpp=\E[V, kri=\E[S,
+	lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8,
+	ll=\Ew, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
+	mrcup=\E[%i%p1%d;%p2%dt,
+	pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2%s,
+	pln=\E[%p1%d;0;0;0q%p2%:-16.16s,
+	rmln=\E|, smln=\E~, prot=\EV, rin=\E[%p1%dF,
+	rmam=\E[?7l, rmir=\E[4l, rmkx=\E[19;0j\E[21;1j\212, sgr0=\E[m^O,
+	sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
+	smam=\E[?7h, smir=\E[4h,
+	smkx=\E[19;1j\E[21;4j\Eent, tbc=\E[3g,
+	tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
+	use=att4410,
+
+att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
+	lm#54, cols#132, wsl#97,
+	is1=\E[?3h$<100>,
+	use=att4415,
+
+att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
+	flash=\E[?5l$<200>\E[?5h,
+	is3=\E[?5h,
+	use=att4415,
+
+att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
+	lm#54, cols#132, wsl#97,
+	flash=\E[?5l$<200>\E[?5h,
+	is1=\E[?3h$<100>, 
+	is3=\E[?5h,
+	use=att4415,
+
+# Note that this mode permits programming USER PF KEYS and labels
+# However, when you program user pf labels you have to reselect
+# user pf keys to make them appear! 
+att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
+	kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
+	pfx=\E[%p1%d;%p2%l%02d;0;1q   F%p1%d           %p2%s,
+	pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
+
+att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
+	kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
+	use=att4415+nl, use=att4415,
+
+att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
+	kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
+	use=att4415+nl, use=att4415-rv,
+
+att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
+	kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
+	use=att4415+nl, use=att4415-w,
+
+att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
+	kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
+	use=att4415+nl, use=att4415-w-rv,
+
+att5420_2|AT&T 5420 model 2 80 cols,
+	am, db, hs, mir, msgr, xon,
+	cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
+	cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
+	cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j,
+	dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+	dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K,
+	el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
+	home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=\t, hts=\EH,
+	ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
+	ind=\n, indn=\E[%p1%dE, invis=\E[8m,
+	is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
+	kbeg=\Et, kbs=\b, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+	kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc,
+	kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh,
+	kf7=\EOi, kf8=\EOj, khome=\E[H, kich1=\E[4h,
+	kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, kpp=\E[V,
+	kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
+	lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i,
+	mc4=\E[4i, mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n, 
+	pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2%s\E~,
+	pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
+	rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O,
+	rmkx=\E[19;0j, rmln=\E|, rmso=\E[m, rmul=\E[m,
+	rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
+	sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
+	sgr0=\E[m^O, smacs=^N, smkx=\E[19;1j,
+	smln=\E~, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+	tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
+att5420_2-w|AT&T 5420 model 2 in 132 column mode,
+	cols#132,
+	is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
+	use=att5420_2,
+
+att4418|att5418|AT&T 5418 80 cols,
+	am, xon,
+	cols#80, lines#24,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r,
+	cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P,
+	dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
+	home=\E[H, ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL,
+	il1=\E[1L, ind=\n, is1=\E[?3l, is2=\E)0\E?6l\E?5l,
+	kclr=\E[%, kcub1=\E@, kcud1=\EU, kcuf1=\EA, kcuu1=\ES,
+	khome=\Ec, kent=\E[, kf1=\E[h, kf10=\E[m, kf11=\E[n, kf12=\E[o,
+	kf13=\E[H, kf14=\E[I, kf15=\E[J, kf18=\E[K, kf19=\E[L,
+	kf2=\E[i, kf20=\E[E, kf21=\E[_, kf22=\E[M, kf23=\E[N,
+	kf24=\E[O, kf3=\E[j, kf6=\E[k, kf7=\E[l, kf8=\E[f,
+	kf9=\E[w, rc=\E8, rev=\E[7m, rmacs=^O, rmso=\E[m,
+	rmul=\E[m, sc=\E7, sgr0=\E[m^O, smacs=^N, smso=\E[7m,
+	smul=\E[4m,
+att4418-w|att5418-w|AT&T 5418 132 cols,
+	cols#132,is1=\E[?3h,use=att5418,
+
+att4420|tty4420|teletype 4420,
+	xon,da, db, eo, msgr, ul,lm#72, OTbs,
+	cols#80, lines#24,
+	bel=^G, clear=\EH\EJ, cr=\EG,
+	cuu1=\EA, cud1=\EB,cuf1=\EC,cub1=\ED,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
+	dch1=\EP, dl1=\EM, ed=\EJ, el=\Ez, il1=\EL,
+	home=\EH,
+	ind=\EH\EM\EY7\s, kcub1=\b, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+	kf0=\EU, kf3=\E@,
+	lf0=segment advance, lf3=cursor tab,
+	kind=\ES, kri=\ET, kcbt=\EO, kclr=\EJ,
+	kil1=\EL, kdl1=\EM, kich1=\E\^, kdch1=\EP, khome=\EH,
+	rmdc@, rmso=\E~, rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
+
+#  The following is a terminfo entry for the Teletype 4424
+#  asynchronous keyboard-display terminal.  It supports
+#  the vi editor.  The terminal must be set up as follows,
+# 	
+# 	HIGHLIGHT DEFINITION	3-TONE
+# 	DISPLAY FUNCTION	GROUP III
+# 	
+#  The second entry below provides limited (a la adm3a)
+#  operation under GROUP II.
+# 	
+#  This must be used with DISPLAY FUNCTION GROUP I or III
+# 	and HIGHLIGHT DEFINITION 3-TONE
+# The terminal has either bold or blink, depending on options
+#
+# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
+att4424|tty4424|teletype 4424,
+	OTbs,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	xon,cr=^M, ind=^J, bel=^G, cols#80, lines#24, am,
+	smso=\E}, rmso=\E~, rev=\E}, smul=\E\\, rmul=\EZ, ri=\ET,
+	xon,bold=\E3, blink=\E3, dim=\EW,
+	ht=^I, cbt=\EO, home=\E[H, cuu1=\EA, cuu=\E[%p1%dA,
+	cud1=\EB, cud=\E[%p1%dB, cuf1=\EC, cuf=\E[%p1%dC,
+	cub1=^H, cub=\E[%p1%dD, cup=\E[%i%p1%d;%p2%dH,
+	clear=\E[H\E[2J, ed=\EJ, el=\Ez, nel=\EE, hts=\EH, tbc=\EF,
+	smacs=\E(0, rmacs=\E(B, is2=\E[20l\E[?7h, csr=\E[%i%p1%d;%p2%dr,
+	il1=\EL, il=\E[%p1%dL, dl1=\EM, dl=\E[%p1%dM,
+	ich1=\E\^, ich=\E[%p1%d@, dch1=\EP, dch=\E[%p1%dP,
+	sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
+	sgr0=\EX\E~\EZ\E4\E(B,
+	kcuu1=\E[A, kcud1=\E[B, kcub1=\E[D, kcuf1=\E[C, khome=\E[H, kbs=^H, kclr=\EJ,
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+
+att4424-1|tty4424-1|teletype 4424 in display function group I,
+	kclr@,kcub1=\ED,kcud1=\EB,kcuf1=\EC,kcuu1=\EA,khome@,use=att4424,
+
+# This entry is not one of AT&T's official ones, it was translated from the
+# 4.4BSD termcap file.  The highlight strings are different from att4424.
+# I have no idea why this is -- older firmware version, maybe?
+# The following two lines are the comment originally attached to the entry:
+# This entry appears to avoid the top line - I have no idea why.
+# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
+att4424m|tty4424m|teletype 4424M, 
+	am, da, db, mir, 
+	cols#80, it#8, lines#23, 
+	bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, 
+	cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, 
+	dch1=\EP, dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, 
+	il1=\EL, ind=^J, ip=$<2/>, is2=\E[m\E[2;24r, 
+	kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
+	kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
+	khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, 
+	rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 
+
+# The Teletype 5425 is really version 2 of the Teletype 5420. It 
+# is quite similar, except for some minor differences. No page 
+# mode, for example, so all of the <cup> sequences used above have 
+# to change back to what's being used for the 5410. Many of the 
+# option settings have changed their numbering as well.
+# 
+# This has been tested on a preliminary model.
+#
+# (att5425: added <rmam>/<smam> based on the init string -- esr)
+att5425|tty5425|att4425|AT&T 4425/5425,
+	am, da, db, hs, mir, msgr, xenl, xon,
+	cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+	clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
+	cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+	cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+	dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD,
+	ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+	flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
+	hpa=\E[%p1%{1}%+%dG, ht=\t, hts=\EH, ich=\E[%p1%d@,
+	il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
+	invis=\E[8m, is1=\E<\E[?3l$<100>,
+	is2=\E[m^O\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
+	is3=\E[?5l, kbeg=\Et, kbs=\b, kcbt=\E[Z, kclr=\E[J,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kdch1=\E[P, kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent,
+	kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
+	kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, kich1=\E[4h,
+	kil1=\E[L, kind=\E[T, kri=\E[S, ll=\E[24H, mc0=\E[?2i,
+	mc4=\E[?9i, mc5=\E[?4i, nel=\r\n,
+	pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%1d\s\s\s\s\s\s\s\s\s\s\s%p2%s,
+	pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
+	rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l, 
+	rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|, rmso=\E[m,
+	rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
+	sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
+	sgr0=\E[m^O, smacs=^N, smam=\E[?7h, smir=\E[4h, 
+	smkx=\E[21;1j\E[25;4j\Eent\E~,
+	smln=\E~, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+	tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
+
+att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
+	smkx=\E[21;1j\E[25;4j\Eent,
+	use=att4425,
+
+att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
+	lm#54, cols#132, wsl#97,
+	is1=\E[?3h$<100>,
+	use=tty5425,
+
+# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:. 
+# I also added <rmam>/<smam> -- esr)
+att4426|tty4426|teletype 4426S,
+	am, xon, da, db,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	cols#80, lines#24, lm#48,
+	is1=\Ec\E[?7h, bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
+	cr=^M, cub1=\E[D, cub=\E[%p1%dD, cud1=\E[B, cud=\E[%p1%dB, cuf1=\E[C,
+	cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH,  cuu1=\EA, cuu=\E[%p1%dA,
+	dch1=\EP, dch=\E[%p1%dP, dl1=\E[M, dl=\E[%p1%dM, ed=\E[J, 
+	el=\E[0K, home=\E[H, hpa=\E[%p1%dG, hts=\E1, ht=\t, ich1=\E\^, 
+	ich=\E[%p1%d@, il1=\EL, il=\E[%p1%dL, ind=\ES, ind=^J, indn=\E[%p1%dS,
+	is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, kclr=\E[2J, kcub1=\ED,
+	kcud1=\EB, kcuf1=\EC,  kcuu1=\EA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
+	kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H,
+	kll=\E[24;1H, ll=\E[24H, nel=^M^J, rc=\E8, rev=\E[7m,
+	ri=\ET, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmso=\E[m,
+	rmul=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B,
+	smacs=\E(0, smam=\E[?7h, smso=\E[5m, smul=\E[4m, smul=\E[4m,
+	tbc=\E[3g, vpa=\E[%p1%dd,
+
+# Terminfo entry for the AT&T 510 A Personal Terminal
+# Function keys 9 - 16 are available only after the 
+# screen labeled (soft keys/action blocks) are labeled.  Function key
+# 9 corresponds to the leftmost touch target on the screen,
+# function key 16 corresponds to the rightmost.
+#
+# This entry is based on one done by Ernie Rice at Summit, NJ and
+# changed by Anne Gallup, Skokie, IL, ttrdc!anne
+att510a|bct510a|AT&T 510A Personal Terminal,
+	am, xenl, mir, msgr, xon,
+	cols#80, lines#24, nlab#8, lh#2, lw#7,
+	cbt=\E[Z, bel=^G, cr=^M, tbc=\E[3g, clear=\E[H\E[J, el=\E[0K, ed=\E[0J,
+	cup=\E[%i%p1%d;%p2%dH, cud1=\E[1B, home=\E[H, cub1=^H, cnorm=\E[11;3|,
+	cuf1=\E[C, cuu1=\E[A, civis=\E[11;0|, cvvis=\E[11;2|, dch1=\E[P,
+	dl1=\E[M, smacs=^N, blink=\E[5m, bold=\E[2;7m, dim=\E[2m, rev=\E[7m,
+	smso=\E[7m, smul=\E[4m, rmacs=^O, sgr0=\E[m^O, rmso=\E[m, rmul=\E[m,
+	ff=^L, is3=\E[21;1|\212, il1=\E[L, kbs=^H, kcud1=\E[B,
+	kf1=\EOm, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh,
+	kf8=\E[H, kf9=\EOc, kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg,
+	kf14=\EOh, kf15=\EOi, kf16=\EOj, kcub1=\E[D, kcuf1=\E[C, kind=\E[S,
+	kri=\E[T, kcuu1=\E[A, rmkx=\E[19;0|, smkx=\E[19;1|, nel=\EE, 
+	dch=\E[%p1%dP, dl=\E[%p1%dM, cud=\E[%p1%dB, il=\E[%p1%dL,
+	cub=\E[%p1%dD, cuf=\E[%p1%dC, cuu=\E[%p1%dA, mc0=\E[0i,
+	mc4=\E[?8i, mc5=\E[?4i, rc=\E8, sc=\E7, ind=^J, ri=\EM,
+	sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t^N%e^O%;,
+	hts=\EH, ht=\t,
+	acsc=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\,h.e+g`b,
+	pln=\E[%p1%dp%p2%:-16s, kcbt=\E[Z, enacs=\E(B\E)1, kLFT=\E[u,
+	kRIT=\E[v, el1=\E[1K, is1=\E(B\E)1\E[2l,
+
+# Terminfo entry for the AT&T 510 D Personal Terminal
+# Function keys 9 through 16 are accessed by bringing up the
+# system blocks.
+# Function key 9 corresponds to the leftmost touch target on the screen,
+# function key 16 corresponds to the rightmost.
+#
+# There are problems with soft key labeling.  These are due to 
+# strangenesses in the native terminal that are impossible to
+# describe in a terminfo.  
+att510d|bct510d|AT&T 510D Personal Terminal,
+	am, da, db, mir, msgr, xenl, xon,
+	cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
+	acsc=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\,h.e+g`b,
+	bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, clear=\E[H\E[J,
+	cnorm=\E[11;3|, cr=^M,cub1=^H, cub=\E[%p1%dD, cud1=\E[1B,
+	cud=\E[%p1%dB, cuf1=\E[C, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH,
+	cuu1=\E[A, cuu=\E[%p1%dA, cvvis=\E[11;2|, dch1=\E[P, dch=\E[%p1%dP,
+	dim=\E[2m, dl1=\E[M, dl=\E[%p1%dM, ed=\E[0J, el1=\E[1K, el=\E[0K,
+	enacs=\E(B\E)1, ff=^L, home=\E[H, hpa=\E[%p1%{1}%+%dG, hts=\EH, ht=\t,
+	ich=\E[%p1%d@, il1=\E[L, il=\E[%p1%dL, ind=^J, indn=\E[%p1%dS,
+	invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, kbs=^H, kcbt=\E[Z,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
+	kf16=\EOj, kf1=\EOm, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
+	kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kLFT=\E[u, kri=\E[T,
+	kRIT=\E[v, ll=\E#2, mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E:,
+	nel=\EE, pln=\E[%p1%dp%p2%:-16s, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db,
+	rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
+	rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|, rs2=\E[5;0|, sc=\E7,
+	sgr0=\E[m^O,
+	sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
+	smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h, smkx=\E[19;1|, smln=\E?,
+	smso=\E[7m, smul=\E[4m, smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
+
+# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
+att500|att513|AT&T 513 using page mode,
+	am, chts, mir, msgr, xenl, xon,
+	cols#80, lh#2, lines#24, lw#8, nlab#8,
+	acsc=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\,h.e+g`b,
+	bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+	clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r,
+	csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
+	cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+	cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>,
+	dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+	el1=\E[1K, enacs=\E(B\E)1, home=\E[H,
+	hpa=\E[%p1%{1}%+%dG, ht=\t, hts=\EH, ich=\E[%p1%d@,
+	il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
+	invis=\E[8m,
+	is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
+	kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
+	kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
+	kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
+	kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
+	kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
+	kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=\b,
+	kcan=\EOw, kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu,
+	kcpy=\ENd, kcrt=\EOn, kcub1=\E[D, kcud1=\E[B,
+	kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, kdl1=\ENe,
+	kel=\EOa, kend=\E0, kent=\Eent, kext=\EOk, kf1=\EOc,
+	kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh,
+	kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, khome=\E[H,
+	kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
+	kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
+	kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
+	kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
+	ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
+	mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i,
+	mc5=\E[?98l\E[?4i, nel=\EE,
+	pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2%s,
+	pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2%s,
+	pfx=\E[%p1%d;%p2%l%d;1;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2%s,
+	pln=\E[%p1%dp%p2%:-16s, rc=\E8,
+	rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
+	rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|\E[21;1|\212,
+	rmln=\E<, rmso=\E[m, rmul=\E[m,
+	rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
+	rs2=\E[5;0|, sc=\E7,
+	sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
+	sgr0=\E[m^O, smacs=^N, smir=\E[4h, smkx=\E[19;1|\E[21;4|\Eent,
+	smln=\E?, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+	vpa=\E[%p1%{1}%+%dd,
+
+# 01-07-88
+# printer must be set to EMUL ANSI to accept ESC codes
+# <cuu1> stops at top margin
+# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
+#	and alt font ascii,wrap on,tabs cleared
+# <is2> disables newline on LF,Emphasized off
+# The <u0> capability sets form length
+att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
+	xhpa, xvpa,
+	bufsz#8192, cols#132, it#8, lines#66, orc#10, orhi#100, 
+	orl#12, orvi#72, cps#120,
+	cr=^M,
+	cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
+	csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
+	cud1=^J, cuf1=\s,
+	cud=\E[%p1%de, cuf=\E[%p1%da,
+	cuu1=\EM,
+	ff=^L,
+	hpa=\E[%p1%d`,
+	ht=^I,
+	is1=\Ec,
+	is2=\E[20l^M,
+	lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
+	rshm=\E[m,
+	scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
+	smgbp=\E[;%p1%dr,
+	smglp=\E[%{1}%p1%+%ds,
+	smgrp=\E[;%{1}%p1%+%ds,
+	smgtp=\E[%p1%dr,
+	sshm=\E[5m,
+	u0=\E[%p1%dt,
+	vpa=\E[%p1%dd,
+
+# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
+# The following SET-UP modes are assumed for normal operation:
+#	CR_DEF=CR	NL_DEF=INDEX	DUPLEX=FULL
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements.  This termcap description is for the Resident Terminal Mode.
+# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# The BRL entry also said: UNSAFE :ll=\E[70H:
+att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs, 
+	am, xon, 
+	cols#88, it#8, lines#70, vt#3, 
+	bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 
+	dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 
+	home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 
+	il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 
+	kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT, 
+	rs1=\Ec, sc=\E7, 
+
+# 5620 terminfo  (2.0 or later ROMS with char attributes)
+# The following SET-UP modes are assumed for normal operation:
+#	DUPLEX=FULL	GEN_FLOW=ON	NEWLINE=INDEX	RETURN=CR
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements.  This termcap description is for Resident Terminal Mode.  No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# assumptions: <ind> (scroll forward one line) is only done at screen bottom
+# Be aware that older versions of the dmd have a firmware bug that affects
+# parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
+# <msgr> is from an otherwise inferior BRL for this terminal.  That entry
+# also has <ll>=\E[70H commented out and marked unsafe.
+# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
+att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
+	npc, xon, am, msgr, OTbs,
+	cols#88, lines#70, it#8,
+	bel=^G, cr=^M, clear=\E[H\E[J,
+	ht=^I, nel=^J,
+	el=\E[K, ed=\E[J,
+	ind=\E[S, indn=\E[%p1%dS, ri=\E[T, rin=\E[%p1%dT,
+	cup=\E[%i%p1%d;%p2%dH, cud1=\E[B, home=\E[H,
+	cub1=^H, cuf1=\E[C, cuu1=\E[A,
+	dch1=\E[P, dch=\E[%p1%dP, dl1=\E[M, dl=\E[%p1%dM,
+	ich1=\E[@, ich=\E[%p1%d@, il1=\E[L, il=\E[%p1%dL,
+	kbs=^H, kclr=\E[2J, kcud1=\E[B, khome=\E[H,
+	kcub1=\E[D, kll=\E[70;1H, kcuf1=\E[C, kcuu1=\E[A,
+	pfx=\E[%p1%d;%p2%l%dq%p2%s,
+	rs1=\Ec, rc=\E8, sc=\E7,
+	smul=\E[4m, rmul=\E[0m,
+	smso=\E[7m, rmso=\E[0m,
+	rev=\E[7m, sgr0=\E[0m,
+	dim=\E[2m, bold=\E[2m,
+att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
+	lines#24, use=att5620,
+att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
+	lines#34, use=att5620,
+# 5620 layer running the "S" system's downloaded graphics handler:
+att5620-s|tty5620-s|layer|vitty|5620 S layer, 
+	OTbs, OTpt, am, 
+	cols#80, it#8, lines#72, 
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, 
+	cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED, 
+	el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 
+	kll=\E[70;1H, 
+
+# Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
+#
+# Entries for <kf29> thru <kf46> refer to the alternate keypad mode
+# keys:  = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
+att605|AT&T 605 80 column 102key keyboard,
+	am, eo, xon,
+	cols#80, lines#24, lw#8, nlab#8, wsl#80,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+	clear=\E[H\E[J, cr=\r, cub1=\b, cud1=\E[B, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+	dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+	el=\E[K, el1=\E[1K, fsl=\E8, ht=\t, ich=\E[%p1%d@,
+	ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m,
+	is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m^O,
+	kLFT=\E[\sA, kRIT=\E[\s@, kbs=\b, kcbt=\E[Z,
+	kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+	kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H,
+	kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs,
+	kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF,
+	kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
+	kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
+	kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ, kf31=\EOR,
+	kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm,
+	kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf, kf40=\EOl,
+	kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, kf45=\EOn,
+	kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
+	kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L,
+	kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H, mc4=\E[?4i,
+	mc5=\E[?5i, nel=\EE,
+	pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%1d\s\s\s\s\s\s\s\s\s\s\s%p2%s,
+	pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+	rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m,
+	rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
+	sgr0=\E[m^O, smacs=\E)0^N, smir=\E[4h, smln=\E[p,
+	smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
+att605-pc|ATT 605 in pc term mode,
+	acsc=k\277l\332m\300j\331n\305w\302q\304u\264t\303v\301x\263,
+	cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, 
+	cbt=\E[Z, il=\E[L, il1=\E[L, ich1=\E[@,
+	dch1=\E[P, dl1=\E[M,
+	kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M, kich1=\E[@,
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kcub1=\E[D,
+	kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N, kf3=\E[O,
+	kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
+	kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I, 
+	smsc=250\E[?11l\E[50;1|, rmsc=400\E[50;0|,
+	xonc=\145, xoffc=\147, 
+	use=att605,
+att605-w|AT&T 605-w 132 column 102 key keyboard,
+	cols#132,
+	is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
+	wsl#132,
+	use=att605,
+# (att610: I added <rmam>/<smam> based on the init string.  I also
+# added <indn> and <rin> because the BSD file says the att615s have them,
+# and the 615 is like a 610 with a big keyboard, and most of their other
+# smart terminals support the same sequence -- esr)
+att610|AT&T 610; 80 column; 98key keyboard,
+	am, xenl, hs, eslok, mir, msgr, xon,
+	cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+	cbt=\E[Z, bel=^G, cr=^M, csr=\E[%i%p1%d;%p2%dr, clear=\E[H\E[J, 
+	el=\E[K, ed=\E[J, cup=\E[%i%p1%d;%p2%dH, cud1=\E[B, home=\E[H,
+	civis=\E[?25l, cub1=^H, cnorm=\E[?25h\E[?12l, cuf1=\E[C, ll=\E[24H,
+	cuu1=\E[A, cvvis=\E[?12;25h, dch1=\E[P, dl1=\E[M, smacs=^N, 
+	blink=\E[5m, bold=\E[1m, dim=\E[2m, smir=\E[4h, ich=\E[%p1%d@,
+	indn=\E[%p1%dS, invis=\E[8m, rev=\E[7m, smso=\E[7m, smul=\E[4m, 
+	rin=\E[%p1%dT, rmacs=^O, sgr0=\E[m^O, rmir=\E[4l, rmso=\E[m, 
+	rmul=\E[m, flash=\E[?5h$<200>\E[?5l, fsl=\E8, 
+	is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
+	is2=\E[m^O, is3=\E(B\E)0, il1=\E[L, kbs=^H, kclr=\E[2J, kcud1=\E[B,
+	kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
+	kf8=\EOj, kf9=\ENo, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs,
+	kf14=\ENt, khome=\E[H, kcub1=\E[D, kcuf1=\E[C, kind=\E[S, kri=\E[T,
+	kcuu1=\E[A, nel=\EE, dch=\E[%p1%dP, dl=\E[%p1%dM, cud=\E[%p1%dB,
+	il=\E[%p1%dL, cub=\E[%p1%dD, cuf=\E[%p1%dC, cuu=\E[%p1%dA,
+	pfx=\E[%p1%d;%p2%l%02dq   F%p1%1d           %p2%s,
+	mc4=\E[?4i, mc5=\E[?5i, rs2=\Ec\E[?3l, rc=\E8, sc=\E7, ind=\ED, ri=\EM,
+	sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
+	ht=\t, tsl=\E7\E[25;%i%p1%dx,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	pln=\E[%p1%d;0;0;0q%p2%:-16.16s,
+	kcbt=\E[Z, smln=\E[p, rmln=\E[2p, kLFT=\E[ @, kRIT=\E[ A, el1=\E[1K,
+	rmam=\E[?7l, smam=\E[?7h, 
+att610-w|AT&T 610; 132 column; 98key keyboard,
+	cols#132, wsl#132, 
+	is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+	use=att610,
+
+att610-103k|AT&T 610; 80 column; 103key keyboard,
+	kf9@, kf10@, kf11@, kf12@, kf13@, kf14@,
+	kdch1=\ENf, kdl1=\ENe, kel=\EOa, kich1=\ENj, krmir=\ENj,
+	knp=\E[U, kpp=\E[V, kbeg=\E9, kcan=\EOw, kclo=\EOV, kcmd=\EOu,
+	kcpy=\ENd, kcrt=\EOn, kend=\E0, kent=^M, kext=\EOk, kfnd=\EOx,
+	khlp=\EOm, kmrk=\ENi, kmsg=\EOl, kmov=\ENc, knxt=\ENh, kopn=\EOv,
+	kopt=\EOr, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, krfr=\ENa,
+	krpl=\EOy, krst=\EOB, kres=\EOq, ksav=\EOo, kspd=\EOp, kund=\EOs,
+	kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, kDC=\ENF,
+	kDL=\ENE, kslt=\ENI, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, kFND=\EOX,
+	kHLP=\EOM, kMSG=\EOL, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
+	kPRV=\ENG, kRDO=\EOT, kRPL=\EOY, kRES=\EOQ, kSAV=\EOO, kSPD=\EOP,
+	kUND=\EOS,
+	use=att610,
+att610-103k-w|AT&T 610; 132 column; 103key keyboard,
+	cols#132, wsl#132, 
+	is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+	use=att610-103k,
+att615|AT&T 615; 80 column; 98key keyboard,
+	kLFT=\E[ A, kRIT=\E[ @,
+	kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf20=\EOH,
+	kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
+	kf27=\ENS, kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
+	kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu,
+	kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
+	kf45=\EOn, kf46=\EOM,
+	use=att610,
+att615-w|AT&T 615; 132 column; 98key keyboard,
+	kLFT=\E[\sA, kRIT=\E[\s@,
+	kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf20=\EOH,
+	kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
+	kf27=\ENS, kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
+	kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu,
+	kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
+	kf45=\EOn, kf46=\EOM,
+	use=att610-w,
+att615-103k|AT&T 615; 80 column; 103key keyboard,
+	kLFT=\E[\sA, kRIT=\E[\s@,
+	use=att610-103k,
+att615-103k-w|AT&T 615; 132 column; 103key keyboard,
+	kLFT=\E[\sA, kRIT=\E[\s@,
+	use=att610-103k-w,
+# (att620: I added <rmam>/<smam> based on the init string and
+# <rin>/<indn> from a BSD termcap -- esr)
+att620|AT&T 620; 80 column; 98key keyboard,
+	am, xenl, hs, eslok, mir, msgr, xon,
+	cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+	cbt=\E[Z, bel=^G, cr=^M, csr=\E[%i%p1%d;%p2%dr, clear=\E[H\E[J,
+	el=\E[K, ed=\E[J, cup=\E[%i%p1%d;%p2%dH, cud1=\E[B, home=\E[H,
+	civis=\E[?25l, cub1=^H, cnorm=\E[?25h\E[?12l, cuf1=\E[C, ll=\E[24H,
+	cuu1=\E[A, cvvis=\E[?12;25h, dch1=\E[P, dl1=\E[M, smacs=\E)0^N,
+	blink=\E[5m, bold=\E[1m, dim=\E[2m, smir=\E[4h, ich=\E[%p1%d@,
+	invis=\E[8m, rev=\E[7m, smso=\E[7m, smul=\E[4m, rmacs=\E(B^O,
+	sgr0=\E[m\E(B^O, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
+	flash=\E[?5h$<200>\E[?5l, fsl=\E8, indn=\E[%p1%dS, 
+	is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
+	is2=\E[m^O, is3=\E(B\E)0, il1=\E[L, kbs=^H, kclr=\E[2J, kcud1=\E[B,
+	kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
+	kf8=\EOj, kf9=\ENo, kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs,
+	kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG,
+	kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
+	kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR,
+	kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
+	kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
+	kf44=\EOp, kf45=\EOn, kf46=\EOM,
+	khome=\E[H, kcub1=\E[D, kcuf1=\E[C, kind=\E[S, kri=\E[T, kcuu1=\E[A,
+	nel=\EE, dch=\E[%p1%dP, dl=\E[%p1%dM, cud=\E[%p1%dB, il=\E[%p1%dL,
+	cub=\E[%p1%dD, cuf=\E[%p1%dC, cuu=\E[%p1%dA, rin=\E[%p1%dT, 
+	pfx=\E[%p1%d;%p2%l%02dq   F%p1%1d           %p2%s,
+	mc4=\E[?4i, mc5=\E[?5i, rs2=\Ec\E[?3l, rc=\E8, sc=\E7, ind=\ED, ri=\EM,
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
+	ht=\t, tsl=\E7\E[25;%i%p1%dx, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	pln=\E[%p1%d;0;0;0q%p2%:-16.16s,
+	kcbt=\E[Z, smln=\E[p, rmln=\E[2p, kLFT=\E[\sA, kRIT=\E[\s@, el1=\E[1K,
+	rmam=\E[?7l, smam=\E[?7h, 
+att620-w|AT&T 620; 132 column; 98key keyboard,
+	cols#132, wsl#132,
+	is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+	use=att620,
+att620-103k|AT&T 620; 80 column; 103key keyboard,
+	kf9@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
+	kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@,
+	kf27@, kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@,
+	kf37@, kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@,
+	kdch1=\ENf, kdl1=\ENe, kel=\EOa, kich1=\ENj, krmir=\ENj, knp=\E[U,
+	kpp=\E[V, kbeg=\E9, kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd,
+	kcrt=\EOn, kend=\E0, kent=^M, kext=\EOk, kfnd=\EOx, khlp=\EOm,
+	kmrk=\ENi, kmsg=\EOl, kmov=\ENc, knxt=\ENh, kopn=\EOv, kopt=\EOr,
+	kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, krfr=\ENa, krpl=\EOy,
+	krst=\EOB, kres=\EOq, ksav=\EOo, kspd=\EOp, kund=\EOs, kBEG=\ENB,
+	kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
+	kslt=\ENI, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, kFND=\EOX, kHLP=\EOM,
+	kMSG=\EOL, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG,
+	kRDO=\EOT, kRPL=\EOY, kRES=\EOQ, kSAV=\EOO, kSPD=\EOP, kUND=\EOS,
+	use=att620,
+
+att620-103k-w|AT&T 620; 132 column; 103key keyboard,
+	cols#132, wsl#132,
+	is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+	use=att620-103k,
+
+# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
+# The following SETUP modes are assumed for normal operation:
+#	Local_Echo=Off	Gen_Flow=On	Return=CR	Received_Newline=LF
+#	Font_Size=Large		Non-Layers_Window_Cols=80
+#				Non-Layers_Window_Rows=60
+# Other SETUP modes may be set for operator convenience or communication
+# requirements.  Some capabilities assume a printer attached to the Aux EIA
+# port.  This termcap description is for the Fixed Non-Layers Window.  No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
+att630|AT&T 630 windowing terminal,
+	am, da, db, mir, msgr, npc, xon, OTbs,
+	cols#80, it#8, lines#60, lm#0,
+	bel=^G, cr=\r, ht=\t, nel=\r\n, cbt=\E[Z, cup=\E[%i%p1%d;%p2%dH,
+	cuu1=\E[A, cud1=\E[B, cuf1=\E[C, cub1=\b, cuu=\E[%p1%dA,
+	cud=\E[%p1%dB, cuf=\E[%p1%dC, cub=\E[%p1%dD, dch1=\E[P, dl1=\E[M,
+	il1=\E[L, dch=\E[%p1%dP, dl=\E[%p1%dM, il=\E[%p1%dL, ich=\E[%p1%d@,
+	el=\E[K, el1=\E[1K, ed=\E[J, clear=\E[H\E[J, home=\E[H, ind=\ED,
+	ri=\EM, ich1=\E[@, indn=\E[%p1%dS, rin=\E[%p1%dT, is2=\E[m,
+	rs2=\Ec, kbs=\b, kclr=\E[2J, kent=\r, khome=\E[H, kcbt=\E[Z,
+	kcuu1=\E[A, kcud1=\E[B, kcuf1=\E[C, kcub1=\E[D, kdch1=\E[P,
+	kdl1=\E[M, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv,
+	kf17=\ENw, kf18=\ENx, kf19=\ENy, kf20=\ENz, kf21=\EN{, kf22=\EN|,
+	kf23=\EN}, kf24=\EN~, kf9=\ENo, kf10=\ENp, kf11=\ENq, kich1=\E[@,
+	kil1=\E[L, mc4=\E[?4i, mc5=\E[?5i, pfx=\E[%p1%d;%p2%l%dq%p2%s,
+	rev=\E[7m, sc=\E7, rc=\E8, sgr0=\E[m,
+	sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m, smir=\E[4h,
+	rmir=\E[4l, smso=\E[7m, rmso=\E[m, smul=\E[4m, rmul=\E[m,
+	blink=\E[5m, dim=\E[2m,
+att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
+	lines#24, use=att630,
+
+# This is the att700 entry for 700 native emulation of the AT&T 700
+# terminal.  Comments are relative to changes from the 605V2 entry and
+# att730 on which the entry is based.  Comments show the terminfo
+# capability name, termcap name, and description.
+#
+# Here is what's going onm in the init string:
+#	ESC [ 50;4|	set 700 native mode (really is 605)
+# x	ESC [ 56;ps| 	set lines to 24: ps=0; 40: ps=1 (plus status line)
+#	ESC [ 53;0|	set GenFlow to Xon/Xoff
+#	ESC [ 8 ;0|	set CR on NL 
+# x	ESC [ ? 3 l/h	set workspace: 80 col(l); 132 col(h)
+#	ESC [ ? 4 l	jump scroll 
+#	ESC [ ? 5 l/h	video: normal (l); reverse (h)
+#	ESC [ ?13 l	Labels on
+#	ESC [ ?15 l	parity check = no
+#	ESC [ 13 l	monitor mode off
+#	ESC [ 20 l	LF on NL (not CRLF on NL)
+#	ESC [ ? 7 h	autowrap on
+#	ESC [ 12 h	local echo off
+#	ESC ( B		GO = ASCII
+#	ESC ) 0		G1 = Special Char & Line Drawing
+#	ESC [ ? 31 l	Set 7 bit controls
+#
+# Note: Most terminals, especially the 600 family use Reverse Video for
+# standout mode.  DEC also uses reverse video.  The VT100 uses bold in addition
+# Assume we should stay with reverse video for 70..  However, the 605V2 exits
+# standout mode with \E[m (all normal attributes).  The 730 entry simply
+# exits reverse video which would leave other current attributes intact.  It
+# was assumed the 730 entry to be more correct so rmso has changed.  The
+# 605V2 has no sequences to turn individual attributes off, thus its setting
+# and the rmso/smso settings from the 730.
+#
+# Note: For the same reason as above in rmso I changed exit under-score mode
+# to specifically turn off underscore, rather than return to all normal 
+# attributes
+#
+# Note: The following pkey_xmit is taken from the 605V2 which contained the
+# capability as pfxl.  It was changed here to pfx since pfxl
+# will only compile successfully with Unix 4.0 tic.  Also note that pfx only
+# allows strings to be parameters and label values must be programmed as
+# constant strings.  Supposedly the pfxl of Version 4.0 allows both labels
+# and strings to be parameters.  The 605V2 pfx entry should be examined later
+# in this regard. For reference the 730 pfxl entry is shown here for comparison
+# 730 pfx entry:
+#     pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
+# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
+#
+# (for 4.0 tic)
+#     pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t   F%p1%1d           %;%p2%s,
+#
+# (for <4.0 tic)
+#     pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t   F%p1%1d           %;%p2%s,
+#
+# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
+#
+# Port1 Interface
+#
+# modular 10 pin Connector
+# Left side       Right side
+# Pin 1 2 3 4 5 6 7 8 9 10
+#
+#        Key (notch) at bottom
+#
+# Pin    1 DSR
+#        3 DCD
+#        4 DTR
+#        5 Sig Ground
+#        6 RD
+#        7 SD
+#        8 CTS
+#        9 RTS
+#        10 Frame Ground
+#
+# The manual is 189 pages and is loaded with details about the escape codes,
+# etc..... Available from AT&T CIC 800-432-6600...
+# ask for Document number 999-300-660..
+#
+att700|AT&T 700 24x80 column display w/102key keyboard,
+	am, eslok, hs, mir, msgr, xenl, xon, 
+	cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 
+	clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 
+	enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4, 
+	fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 
+	il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, 
+	is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017, 
+	is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, 
+	kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, 
+	kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, 
+	kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, 
+	kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, 
+	kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq, 
+	kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu, 
+	kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu, 
+	kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, 
+	kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, 
+	kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 
+	kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H, 
+	mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 
+	pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t   F%p1%1d           %;%p2%s, 
+	pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, 
+	rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, 
+	rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m, 
+	rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7, 
+	sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 
+	sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m, 
+	smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g, 
+	tsl=\E7\E[99;%i%p1%dx, 
+
+# This entry was modified 3/13/90 by JWE.
+# fixes include additions of <enacs>, correcting <rep>, and modification
+# of <kHOM>.  (See comments below)
+# att730 has status line of 80 chars
+# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
+# the <kf25> and up keys are used for shifted system Fkeys
+# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is 
+# currently the same as <khome> (unshifted HOME or \E[H).  On the 102, 102+1
+# and 122 key keyboards, the 730's translation is \E[2J.  For consistency
+# <kHOM> has been commented out.  The user can uncomment <kHOM> if using the
+# 102, 102+1, or 122 key keyboards
+#       kHOM=\E[2J,
+# (att730: I added <rmam>/<smam> based on the init string -- esr)
+att730|AT&T 730 windowing terminal,
+	hs,am, da, db, xenl, mir, msgr, npc, xon, eslok,
+	it#8, lm#0, wsl#80, cols#80, lines#60, lw#8, lh#2, nlab#24,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, bel=^G,
+	blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J,
+	cnorm=\E[?25h\E[?12l, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
+	cub=\E[%p1%dD, cud1=\E[B, cud=\E[%p1%dB, cuf1=\E[C, cuf=\E[%p1%dC,
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cuu=\E[%p1%dA, cvvis=\E[?12;25h,
+	dch1=\E[P, dch=\E[%p1%dP, dim=\E[2m, dl1=\E[M, dl=\E[%p1%dM,
+	ed=\E[J, el1=\E[1K, el=\E[K, enacs=\E(B\E)0,
+	flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=\t, ich=\E[%p1%d@,
+	il1=\E[L, il=\E[%p1%dL, ind=\ED, invis=\E[8m,
+	is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
+	is2=\E[m^O, is3=\E(B\E)0, kLFT=\E[\s@, kRIT=\E[\sA, kbs=^H,
+	kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+	kcuu1=\E[A, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx,
+	kf19=\ENy, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
+	kf6=\EOh, kf7=\EOi, kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN},
+	kf24=\EN~, kf25=\EOC, kf26=\EOD, kf27=\EOE, kf28=\EOF, kf29=\EOG,
+	kf30=\EOH, kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
+	kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf40=\EOV, kf41=\EOW,
+	kf42=\EOX, kf43=\EOY, kf44=\EOZ, kf45=\EO[, kf46=\EO\s, kf47=\EO],
+	kf48=\EO\^, kf8=\EOj, kf9=\ENo, kf10=\ENp, kf11=\ENq, kf12=\ENr,
+	kf13=\ENs, khome=\E[H, kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
+	mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+	pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
+	pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
+	pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db,
+	rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
+	rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m^O,
+	sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t^N%e^O%;,
+	smacs=^N, smir=\E[4h, smln=\E[?13l, smso=\E[7m, smul=\E[4m,
+	smxon=\E[?21h, swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
+	rmam=\E[?7l, smam=\E[?7h, 
+att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
+	lines#41,
+	use=att730,
+att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
+	lines#24,
+	use=att730,
+att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
+	flash=\E[?5l$<200>\E[?5h,
+	is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
+	use=att730,
+att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
+	lines#41,
+	use=att730r,
+att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
+	lines#24,
+	use=att730r,
+
+# The following represents the screen layout along with the associated
+# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
+# not appear on the screen but are shown to reference the bezel buttons.
+# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
+# position relative to the screen.
+#
+#
+#
+#      +----------------------------------------------------------------+
+#      |                                                                |
+# XXXX | kf0                                                       kf24 | XXXX
+#      |                                                                |
+#      |                                                                |
+# XXXX | kf1                                                       kf23 | XXXX
+#      |                                                                |
+#      |                                                                |
+# XXXX | kf2                                                       kf22 | XXXX
+#      |                                                                |
+#      |                                                                |
+# XXXX | kf3                                                       kf21 | XXXX
+#      |                                                                |
+#      |                                                                |
+# XXXX | kf4                                                       kf20 | XXXX
+#      |                                                                |
+#      |                                                                |
+# XXXX | kf5                                                       kf19 | XXXX
+#      |                                                                |
+#      |                                                                |
+# XXXX | kf6                                                       kf18 | XXXX
+#      |                                                                |
+#      |                                                                |
+# XXXX |                                                                | XXXX
+#      |                                                                |
+#      |                                                                |
+#      +----------------------------------------------------------------+
+#
+#          XXXX  XXXX  XXXX  XXXX  XXXX  XXXX  XXXX  XXXX  XXXX  XXXX
+#
+# Note: XXXX represents the screen buttons
+#                                                          CMD   REDRAW
+#
+#                                                          MAIL
+#
+# version 1 note: 
+#	The character string sent by key 'kf26' may be user programmable
+#       to send either \E[16s, or \E[26s.
+#       The character string sent by key 'krfr' may be user programmable
+#       to send either \E[17s, or \E[27s.
+#
+# Depression of the "CMD" key sends    \E!    (kcmd)
+# Depression of the "MAIL" key sends   \E[26s (kf26)
+# "REDRAW" same as "REFRESH" (krfr)
+#
+# "kf" functions adds carriage return to output string if terminal is in
+# 'new line' mode.
+#
+# The following are functions not covered in the table above:
+#
+#       Set keyboard character (SKC): \EPn1;Pn2w
+#                       Pn1= 0 Back Space key
+#                       Pn1= 1 Break key
+#                       Pn2=   Program char (hex)
+#
+#       Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
+#                       Pn1=     Window number (1-39)
+#                       Pn2-Pn5= Y;X;Y;X coordinates
+#
+#       Screen Selection (SSL): \E[Pnu
+#                       Pn= Window number
+#
+#       Set Terminal Modes (SM): \E[Pnh
+#                       Pn= 3 Graphics mode
+#                       Pn= > Cursor blink
+#                       Pn= < Enter new line mode
+#                       Pn= = Enter reverse insert/replace mode
+#                       Pn= ? Enter no scroll mode
+#
+#       Reset Terminal Mode (RM): \E[Pnl
+#                       Pn= 3 Exit graphics mode
+#                       Pn= > Exit cursor blink
+#                       Pn= < Exit new line mode
+#                       Pn= = Exit reverse insert/replace mode
+#                       Pn= ? Exit no scroll mode
+#
+#       Screen Status Report (SSR): \E[Pnp
+#                       Pn= 0 Request current window number
+#                       Pn= 1 Request current window dimensions
+#
+#       Device Status Report (DSR): \E[6n    Request cursor position
+#
+#       Call Status Report (CSR): \E[Pnv
+#                       Pn= 0 Call failed
+#                       Pn= 1 Call successful
+#
+#       Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
+#                       Pn1= Button number to be loaded
+#                       Pn2= Character count of "string"
+#                       Pn3= Key mode being loaded:
+#                               0= Unshifted
+#                               1= Shifted
+#                               2= Control
+#                       String= Text string (15 chars max)
+#
+#       Screen Number Report (SNR): \E[Pnp
+#                       Pn= Screen number
+#
+#       Screen Dimension Report (SDR): \E[Pn1;Pn2r
+#                       Pn1= Number of rows available in window
+#                       Pn2= Number of columns available in window
+#
+#       Cursor Position Report (CPR): \E[Pn1;Pn2R
+#                       Pn1= "Y" Position of cursor
+#                       Pn2= "X" Position of cursor
+#
+#       Request Answer Back (RAB): \E[c
+#
+#       Answer Back Response (ABR): \E[?;*;30;VSV
+#                       *=  0 No printer available
+#                       *=  2 Printer available
+#                       V=  Software version number
+#                       SV= Software sub version number
+#	(printer-available field not documented in v1)
+#
+#       Screen Alignment Aid: \En
+#
+#       Bell (lower pitch): \E[x
+#
+#       Dial Phone Number: \EPdstring\
+#                       string= Phone number to be dialed
+#
+#       Set Phone Labels: \EPpstring\
+#                       string= Label for phone buttons
+#
+#       Set Clock: \EPchour;minute;second\
+#
+#       Position Clock: \EPsY;X\
+#                       Y= "Y" coordinate
+#                       X= "X" coordinate
+#
+#       Delete Clock: \Epr\
+#
+#       Programming The Function Buttons: \EPfPn;string\
+#                       Pn= Button number (00-06, 18-24)
+#                                         (kf00-kf06, kf18-kf24)
+#                       string= Text to sent on button depression
+#
+# The following in version 2 only:
+#
+#       Request For Local Directory Data: \EPp12;\
+#
+#       Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
+#
+#	Request for Local Directory Data in print format: \EPp13;\
+#
+#	Enable 'Prt on Line' mode: \022 (DC2)
+#
+#	Disable 'Prt on Line' mode: \024 (DC4)
+#
+
+# 05-Aug-86:
+# The following Terminfo entry describes functions which are supported by
+# the AT&T 5430/pt505 terminal software version 2 and later.
+att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
+	am, xon, 
+	cols#80, it#8, lines#24, 
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cnorm=\E[>l,
+	cr=\r, cub1=\E[D, cub=\E[%p1%dD, cud=\E[%p1%dB, cud1=\E[B,
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA,
+	cuu1=\E[A, cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+	dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E2K, home=\E[H, ht=\t,
+	il=\E[%p1%dL, il1=\E[L, ind=\n,
+	is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
+	kbs=\b, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kf0=\E[00s, kf1=\E[01s, kf2=\E[02s, kf3=\E[03s, kf4=\E[04s,
+	kf5=\E[05s, kf6=\E[06s, kf18=\E[18s, kf19=\E[19s, kf20=\E[20s,
+	kf21=\E[21s, kf22=\E[22s, kf23=\E[23s, kf24=\E24s, kf26=\E26s,
+	krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, rmacs=\E[10m,
+	rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m,
+	smacs=\E[11m, smir=\E[4h, smso=\E[1m, smul=\E[4m,
+	rmam=\E[11;1j, smam=\E[11;0j,
+
+# The following Terminfo entry describes functions which are supported by
+# the AT&T 5430/pt505 terminal software version 1.
+att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines, 
+	mc4@, mc5@, rc@, rmam@, sc@, smam@, 
+	lines#24, use=att505,
+tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
+	lines#22, use=att505,
+
+#### Ampex (Dialogue)
+#
+# Yes, these are the same people who are better-known for making audio- and
+# videotape.  I'm told they are located in Redwood City, CA.
+#
+
+# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
+# (ampex80: some capabilities merged in from SCO's entry -- esr)
+ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80, 
+	am, bw, ul, OTbs,
+	cols#80, it#8, lines#24, 
+	bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1, ich1=\EQ, 
+	il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em, 
+	smso=\Ej, smul=\El, tbc=\E3, 
+# This entry was from somebody anonymous, Tue Aug  9 20:11:37 1983, who wrote:
+ampex175|ampex d175,
+	cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EE, am, cub1=^H,
+	ed=\Ey, el=\Et, clear=\E+, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+	cols#80, dch1=\EW, dl1=\ER,
+	home=\036, ich1=\EQ, is2=\EX\EA\EF,
+	kcud1=^J, khome=\036, kcub1=^H, kcuf1=^L,
+	kcuu1=^K, kil1=\EE, kdl1=\ER, kich1=\EQ, kdch1=\EW,
+	lines#24, ll=\036^K, cuf1=^L,
+	rmso=\Ek, smso=\Ej, rmcup=\EF, smcup=\EN, rmul=\Em, cuu1=^K,
+	smul=\El,
+# No backspace key in the main QWERTY cluster. Fortunately, it has a
+# NEWLINE/PAGE key just above RETURN that sends a strange single-character
+# code.  Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
+# mode), this key can be used as the erase key; I find I like this. Because
+# some people and some systems may not, there is another termcap ("ampex175")
+# that suppresses this little eccentricity by omitting the relevant capability.
+ampex175-b|ampex d175 using left arrow for erase,
+	kbs=^_, use=ampex175,
+# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
+# (ampex210: removed obsolete ":kn#10:" -- esr)
+ampex210|a210|ampex a210, 
+	am, hs, xenl, OTbs,
+	cols#80, it#8, lines#24, xmc#1, 
+	cbt=\EI, clear=\E*, cub1=^H, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER, ed=\Ey, el=\Et, 
+	flash=\EU\EX\EU\EX\EU\EX\EU\EX, fsl=\E.2, home=^^, ht=\t, 
+	ich1=\EQ, if=/usr/share/tabset/std, il1=\EE, 
+	is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, 
+	kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, 
+	kf1=^A1\r, kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, 
+	kf5=^A5\r, kf6=^A6\r, kf7=^A7\r, kf8=^A8\r, 
+	kf9=^A9\r, khome=^^, tsl=\E.0\Eg\E}\Ef, 
+	invis@, use=adm+sgr,
+# (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
+# from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
+# and moved the padding to be *after* the caps -- esr)
+ampex219|ampex-219|amp219|Ampex with Automargins,
+	cr=^M, cud1=^J, ind=^J, bel=^G,
+	hs, cols#80, it#8, lines#24, cbt=\E[Z, bel=^G, cub1=^H,
+	clear=\E[H\E[2J$<50>, el=\E[K$<3>, ed=\E[J$<50>,
+	cup=\E[%i%p1%d;%p2%dH$<5>,
+	cud1=\E[B, home=\E[H,
+	cuf1=\E[C$<2>, cuu1=\E[A$<2>,
+	cnorm=\E[?3l, cvvis=\E[?3h, 
+	blink=\E[5m$<2>, bold=\E[1m$<2>, dim=\E[1m, rev=\E[7m, smso=\E[7m$<2>, 
+	smul=\E[4m$<2>, sgr0=\E[m$<2>, rmso=\E[m$<2>, rmul=\E[m$<2>,
+	kcuu1=\E[A, kcud1=\E[B, kcuf1=\E[C, kcub1=\E[D,
+	is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+	khome=\E[H, ht=^I, xenl, ri=\EM$<5>, 
+	smkx=\E\075, rmkx=\E\076,
+	kf0=\E[21~, kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
+	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
+	csr=%i\E[%p1%2d;%p2%2dr, rmam=\E[?7l, smam=\E[?7h, 
+ampex219w|ampex-219w|amp219w|Ampex 132 cols,
+	cr=^M, cud1=^J, ind=^J, bel=^G,
+	cols#132, lines#24, is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
+	use=ampex219, 
+# (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr) 
+ampex232|ampex-232|Ampex Model 232, 
+	am, 
+	cols#80, lines#24, xmc#1, 
+	cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, 
+	cub1=^H, cud1=^V, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER$<5*/>, ed=\EY, el=\ET, 
+	flash=\Eb$<200/>\Ed, 
+	ht=^I, ich1=\EQ, 
+	il1=\EE$<5*/>, is2=\Eg\El, kbs=^H, kcub1=^H, 
+	kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A@\r, kf1=^AA\r, 
+	kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, 
+	kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^, 
+	invis@, use=adm+sgr,
+# (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr) 
+ampex232w|Ampex Model 232 / 132 columns,
+	cols#132, lines#24, 
+	is2=\E^\Eg\El, 
+	use=ampex232, 
+
+#### Ann Arbor (aa)
+#
+# Ann Arbor made dream terminals for hackers -- large screen sizes and huge
+# numbers of function keys.  At least some used monitors in portrait mode,
+# allowing up to 76-character screen heights!  They were reachable at:
+#
+#	Ann Arbor Terminals
+#	6175 Jackson Road
+#	Ann Arbor, MI 48103
+#	(313)-663-8000
+#
+# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
+# can't be found on the Web; I fear they're long dead.  R.I.P.
+#
+
+
+# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
+# Highly modified 6/22 by Mike O'Brien.
+# split out into several for the various screen sizes by dave-yost@rand
+# Modifications made 3/82 by Mark Horton
+# Modified by Tom Quarles at UCB for greater efficiency and more diversity
+# status line moved to top of screen, <flash> removed 5/82
+# Some unknown person at SCO then hacked the init strings to make them more
+# efficient.
+#
+# assumes the following setup:
+#   A menu: 0000 1010  0001 0000
+#   B menu: 9600  0100 1000  0000 0000  1000 0000  17  19
+#   C menu: 56   66   0    0    9600  0110 1100
+#   D menu: 0110 1001   1   0
+#
+#	Briefly, the settings are for the following modes:
+#	   (values are for bit set/clear with * indicating our preference
+#	    and the value used to test these termcaps)
+#	Note that many of these settings are irrelevent to the terminfo
+#	and are just set to the default mode of the terminal as shipped
+#	by the factory.
+#
+# A menu: 0000 1010  0001 0000
+#	Block/underline cursor*
+#	blinking/nonblinking cursor*
+#	key click/no key click*
+#	bell/no bell at column 72*
+#
+#	key pad is cursor control*/key pad is numeric
+#	return and line feed/return for <cr> key *
+#	repeat after .5 sec*/no repeat
+#	repeat at 25/15 chars per sec. *
+#
+#	hold data until pause pressed/process data unless pause pressed*
+#	slow scroll/no slow scroll*
+#	Hold in area/don't hold in area*
+#	functions keys have default*/function keys disabled on powerup
+#
+#	show/don't show position of cursor during page transmit*
+#	unused
+#	unused
+#	unused
+#
+# B menu: 9600  0100 1000  0000 0000  1000 0000  17  19
+#	Baud rate (9600*)
+#
+#	2 bits of parity - 00=odd,01=even*,10=space,11=mark
+#	1 stop bit*/2 stop bits
+#	parity error detection off*/on
+#
+#	keyboard local/on line*
+#	half/full duplex*
+#	disable/do not disable keyboard after data transmission*
+#
+#	transmit entire page/stop transmission at cursor*
+#	transfer/do not transfer protected characters*
+#	transmit all characters/transmit only selected characters*
+#	transmit all selected areas/transmit only 1 selected area*
+#
+#	transmit/do not transmit line separators to host*
+#	transmit/do not transmit page tab stops tabs to host*
+#	transmit/do not transmit column tab stop tabs to host*
+#	transmit/do not transmit graphics control (underline,inverse..)*
+#
+#	enable*/disable auto XON/XOFF control
+#	require/do not require receipt of a DC1 from host after each LF*
+#	pause key acts as a meta key/pause key is pause*
+#	unused
+#
+#	unused
+#	unused
+#	unused
+#	unused
+#
+#	XON character (17*)
+#	XOFF character (19*)
+#
+# C menu: 56   66   0    0    9600  0110 1100
+#	number of lines to print data on (printer) (56*)
+#
+#	number of lines on a sheet of paper (printer) (66*)
+#
+#	left margin (printer) (0*)
+#
+#	number of pad chars on new line to printer (0*)
+#
+#	printer baud rate (9600*)
+#
+#	printer parity: 00=odd,01=even*,10=space,11=mark
+#	printer stop bits: 2*/1
+#	print/do not print guarded areas*
+#
+#	new line is: 01=LF,10=CR,11=CRLF*
+#	unused
+#	unused
+#
+# D menu: 0110 1001   1   0
+#	LF is newline/LF is down one line, same column*
+#	wrap to preceding line if move left from col 1*/don't wrap
+#	wrap to next line if move right from col 80*/don't wrap
+#	backspace is/is not destructive*
+#
+#	display*/ignore DEL character
+#	display will not/will scroll*
+#	page/column tab stops*
+#	erase everything*/erase unprotected only
+#
+#	editing extent: 0=display,1=line*,2=field,3=area
+#
+#	unused
+#
+
+annarbor4080|aa4080|ann arbor 4080,
+	cr=^M, cud1=^J, ind=^J, bel=^G, ht=^I, tbc=^\^P^P, hts=^]^P1, OTbs,
+	cup=^O%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%'@'%+%c,
+	cols#80, lines#40, cub1=^H, clear=^L$<2>, cuu1=^N, cuf1=^_,
+	home=^K, am, kbs=^^, kcud1=^J, kcuu1=^N, kcub1=^H, kcuf1=^_, khome=^K,
+
+# Strange Ann Arbor terminal from BRL
+aas1901|Ann Arbor K4080 w/S1901 mod, 
+	am, 
+	cols#80, lines#40, 
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N, 
+	home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c, 
+	nel=^M^J, 
+
+# If you're using the GNU termcap library, add
+#	:cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
+# to these capabilities.  This is the nonstandard GNU termcap scrolling
+# capability, arguments are:
+#   1. Total number of lines on the screen.
+#   2. Number of lines above desired scroll region.
+#   3. Number of lines below (outside of) desired scroll region.
+#   4. Total number of lines on the screen, the same as the first parameter.
+# The generic Ann Arbor entry is the only one that uses this.
+aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
+	am, km, mc5i, mir, xon, OTbs,
+	cols#80, it#8,
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+	clear=\E[H\E[J$<156>, cr=\r, cub=\E[%p1%dD, cub1=\b,
+	cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+	ed=\E[J, el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG,
+	ht=\t, hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>,
+	il=\E[%p1%dL, il1=\E[L$<3>, ind=^K, invis=\E[8m,
+	is1=\E[m\E7\E[H\E9\E8,
+	is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=\b, kcbt=\E[Z,
+	kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+	kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf1=\EOA,
+	kf10=\EOJ, kf11=\EOK, kf12=\EOL, kf13=\EOM, kf14=\EON,
+	kf15=\EOO, kf16=\EOP, kf17=\EOQ, kf18=\EOR, kf19=\EOS,
+	kf2=\EOB, kf20=\EOT, kf21=\EOU, kf22=\EOV, kf23=\EOW,
+	kf24=\EOX, kf3=\EOC, kf4=\EOD, kf5=\EOE, kf6=\EOF,
+	kf7=\EOG, kf8=\EOH, kf9=\EOI, khome=\E[H, kich1=\E[@,
+	kil1=\E[L, krmir=\E6, mc0=\E[0i, mc4=^C, mc5=\E[v,
+	mc5p=\E[%p1%dv, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db,
+	rev=\E[7m,
+	rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
+	rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
+	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
+	sgr0=\E[m,
+	smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
+	smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
+	vpa=\E[%p1%{1}%+%dd,
+	.flash=\E7\E[H\E[7m\E9$<200>\E[m\E9\E8,
+
+aaa+rv|ann arbor ambassador in reverse video,
+	bold=\E[1;7m, rev=\E[m, blink=\E[5;7m, invis=\E[7;8m, sgr0=\E[7m^N,
+	rmul=\E[7m, smul=\E[4;7m, rmso=\E[7m, smso=\E[m, rs1=\E[H\E[7m\E[J$<156>,
+	sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
+	.flash=\E7\E[H\E[m\E9$<200>\E[7m\E9\E8,
+	is1=\E[7m\E7\E[H\E9\E8,
+# Ambassador with the DEC option, for partial vt100 compatibility.
+aaa+dec|ann arbor ambassador in dec vt100 mode,
+	csr=\E[%i%p1%d;%p2%dr,
+	sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t^O%e^N%;,
+	enacs=\E(0, smacs=^O, rmacs=^N,
+	acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
+aaa-18|ann arbor ambassador/18 lines,
+	smcup=\E[18;0;0;18p, rmcup=\E[60;0;0;18p\E[60;1H\E[K,
+	is2=\E7\E[60;0;0;18p\E8, lines#18, use=aaa+unk,
+aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
+	use=aaa+rv, use=aaa-18,
+aaa-20|ann arbor ambassador/20 lines,
+	smcup=\E[20;0;0;20p, rmcup=\E[60;0;0;20p\E[60;1H\E[K,
+	is2=\E7\E[60;0;0;20p\E8, lines#20, use=aaa+unk,
+aaa-22|ann arbor ambassador/22 lines,
+	smcup=\E[22;0;0;22p, rmcup=\E[60;0;0;22p\E[60;1H\E[K,
+	is2=\E7\E[60;0;0;22p\E8, lines#22, use=aaa+unk,
+aaa-24|ann arbor ambassador/24 lines,
+	smcup=\E[24;0;0;24p, rmcup=\E[60;0;0;24p\E[60;1H\E[K,
+	is2=\E7\E[60;0;0;24p\E8, lines#24, use=aaa+unk,
+aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
+	use=aaa+rv, use=aaa-24,
+aaa-26|ann arbor ambassador/26 lines,
+	smcup=\E[H\E[J$<156>\E[26;0;0;26p, rmcup=\E[60;0;0;26p\E[26;1H\E[K,
+	is2=\E7\E[60;0;0;26p\E8, lines#26, use=aaa+unk,
+aaa-28|ann arbor ambassador/28 lines,
+	smcup=\E[H\E[J$<156>\E[28;0;0;28p, rmcup=\E[60;0;0;28p\E[28;1H\E[K,
+	is2=\E7\E[60;0;0;28p\E8, lines#28, use=aaa+unk,
+aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
+	smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
+	rmcup=\E[60;1;0;30p\E[29;1H\E[K,
+	is2=\r\n\E[A\E7\E[60;1;0;30p\E8, lines#29,
+	tsl=\E[>51h\E[1;%p1%dH\E[2K, fsl=\E[>51l, hs, eslok,
+	dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
+	use=aaa+unk,
+aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
+	use=aaa+rv, use=aaa-30-s,
+aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
+	smcup=\E[30;1H\E[K\E[30;1;0;30p, rmcup=\E[60;1;0;30p\E[59;1H\E[K,
+	use=aaa-30-s,
+aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
+	smcup=\E[30;1H\E[K\E[30;1;0;30p, rmcup=\E[60;1;0;30p\E[59;1H\E[K,
+	use=aaa-30-s-rv,
+aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
+	smcup=\E[H\E[J$<156>\E[30;0;0;30p, rmcup=\E[60;0;0;30p\E[30;1H\E[K,
+	is2=\E7\E[60;0;0;30p\E8, lines#30, use=aaa+unk,
+aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
+	use=aaa+rv, use=aaa-30,
+aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
+	smcup=\E[30;0;0;30p, rmcup=\E[60;0;0;30p\E[60;1H\E[K, use=aaa-30,
+aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
+	smcup=\E[30;0;0;30p, rmcup=\E[60;0;0;30p\E[60;1H\E[K,
+	use=aaa+rv, use=aaa-30,
+aaa-36|ann arbor ambassador/36 lines,
+	smcup=\E[H\E[J$<156>\E[36;0;0;36p, rmcup=\E[60;0;0;36p\E[36;1H\E[K,
+	is2=\E7\E[60;0;0;36p\E8, lines#36, use=aaa+unk,
+aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
+	use=aaa+rv, use=aaa-36,
+aaa-40|ann arbor ambassador/40 lines,
+	smcup=\E[H\E[J$<156>\E[40;0;0;40p, rmcup=\E[60;0;0;40p\E[40;1H\E[K,
+	is2=\E7\E[60;0;0;40p\E8, lines#40, use=aaa+unk,
+aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
+	use=aaa+rv, use=aaa-40,
+aaa-48|ann arbor ambassador/48 lines,
+	smcup=\E[H\E[J$<156>\E[48;0;0;48p, rmcup=\E[60;0;0;48p\E[48;1H\E[K,
+	is2=\E7\E[60;0;0;48p\E8, lines#48, use=aaa+unk,
+aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
+	use=aaa+rv, use=aaa-48,
+aaa-60-s|ann arbor ambassador/59 lines+status,
+	is2=\r\n\E[A\E7\E[60;1;0;60p\E8, lines#59,
+	tsl=\E[>51h\E[1;%p1%dH\E[2K, fsl=\E[>51l, hs, eslok,
+	dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
+	use=aaa+unk,
+aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
+	use=aaa+rv, use=aaa-60-s,
+aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
+	use=aaa+dec, use=aaa+rv, use=aaa-60-s,
+aaa-60|ann arbor ambassador/60 lines,
+	is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8, lines#60, use=aaa+unk,
+aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
+	use=aaa+rv, use=aaa-60,
+aaa-db|ann arbor ambassador 30/destructive backspace,
+	cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, OTbs@, use=aaa-30,
+
+guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
+	smcup=\E[33p, rmcup=\E[255p\E[255;1H\E[K,
+	flash=\E[>59h$<100>\E[>59l,
+	is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l, lines#33, use=aaa+unk,
+guru+rv|guru changes for reverse video,
+	flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
+guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
+	use=guru+rv, use=guru-33,
+guru+s|guru status line,
+	rmcup=\E[255;1p\E[255;1H\E[K, smcup=, 
+	tsl=\E[>51h\E[1;%p1%dH\E[2K, fsl=\E[>51l, hs, eslok,
+	dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K,
+guru-nctxt|guru with no saved context,
+	smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
+guru-s|guru-33-s|ann arbor guru/33 lines+status,
+	smcup=\E[33;1p\E[255;1H\E[K,
+	is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J, lines#32,
+	use=guru+s, use=guru+unk,
+guru-24|ann arbor guru 24 lines,
+	smcup=\E[24p, is2=\E7\E[255;0;0;24;80;80p\E8\E[J,
+	lines#24, cols#80, use=guru+unk,
+guru-44|ann arbor guru 44 lines,
+	smcup=\E[44p, is2=\E7\E[255;0;0;44;97;100p\E8\E[J,
+	lines#44, cols#97, use=guru+unk,
+guru-44-s|ann arbor guru/44 lines+status,
+	smcup=\E[44;1p\E[255;1H\E[K,
+	is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J, lines#43,
+	use=guru+s, use=guru+unk,
+guru-76|guru with 76 lines by 89 cols,
+	smcup=\E[76p, is2=\E7\E[255;0;0;76;89;100p\E8\E[J,
+	lines#76, cols#89, use=guru+unk,
+guru-76-s|ann arbor guru/76 lines+status,
+	smcup=\E[76;1p\E[255;1H\E[K,
+	is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J, lines#75, cols#89,
+	use=guru+s, use=guru+unk,
+guru-76-lp|guru-lp|guru with page bigger than line printer,
+	smcup=\E[76p, is2=\E7\E[255;0;0;76;134;134p\E8\E[J,
+	lines#76, cols#134, use=guru+unk,
+guru-76-w|guru 76 lines by 178 cols,
+	smcup=\E[76p, is2=\E7\E[255;0;0;76;178;178p\E8\E[J,
+	lines#76, cols#178, use=guru+unk,
+guru-76-w-s|ann arbor guru/76 lines+status+wide,
+	smcup=\E[76;1p\E[255;1H\E[K,
+	is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J, lines#75, cols#178,
+	use=guru+s, use=guru+unk,
+guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
+	smcup=\E[76p, is2=\E7\E[255;0;0;76;178;255p\E8\E[J,
+	lines#76, cols#178, use=guru+unk,
+aaa-rv-unk|ann arbor unknown type,
+	lh#0, lw#0, nlab#0,
+	blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
+	is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m,
+	rmul=\E[7m, rs1=\E[H\E[7m\E[J,
+	sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
+	sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
+
+#### Applied Digital Data Systems (adds)
+#
+# ADDS itself is long gone.  ADDS was bought by NCR, and the same group made
+# ADDS and NCR terminals.  When AT&T and NCR merged, the engineering for
+# terminals was merged again.  Then AT&T sold the terminal business to
+# SunRiver, which later changed its  name to Boundless Technologies.  The
+# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
+# as of early 1995) are at:
+#
+#	Boundless Technologies
+#	100 Marcus Boulevard
+#	Hauppauge, NY 11788-3762
+#	Vox: (800)-231-5445
+#	Fax: (516)-342-7378
+#	Web: http://boundless.com
+#
+# Their voice mail used to describe the place as "SunRiver (formerly ADDS)". 
+# In 1995 Boundless acquired DEC's terminals business.  
+#
+
+# Regent: lowest common denominator, works on all regents.
+# (regent: renamed ":bc:" to ":le:" -- esr)
+regent|Adds Regent Series, 
+	OTbs, am, 
+	cols#80, lines#24, 
+	bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z, 
+	home=\EY\s\s, ind=^J, ll=^A, 
+# Regent 100 has a bug where if computer sends escape when user is holding
+# down shift key it gets confused, so we avoid escape.
+regent100|Adds Regent 100, 
+	xmc#1, 
+	bel=^G, cup=\013%p1%{32}%+%c%p2%p2%{6}%*%+\020%c, 
+	kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, 
+	kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, 
+	lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, 
+	lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P, smul=\E0`,
+	use=regent,
+regent20|Adds Regent 20, 
+	bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK, use=regent,
+regent25|Adds Regent 25, 
+	bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A, use=regent20,
+regent40|Adds Regent 40, 
+	xmc#1, 
+	bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r, 
+	kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, 
+	kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, 
+	lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, 
+	rmul=\E0@, sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent25,
+regent40+|Adds Regent 40+, 
+	is2=\EB, use=regent40,
+regent60|regent200|Adds Regent 60, 
+	dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF, 
+	rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV, use=regent40+,
+# From: <edward@onyx.berkeley.edu> Thu Jul  9 09:27:33 1981
+# (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
+viewpoint|addsviewpoint|adds viewpoint, 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, cvvis=\017\E0P, dl1=\El,
+	ed=\Ek$<16.1*>, el=\EK$<16>, ind=^J, is2=\017\E0`, 
+	kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A, ll=^A, 
+	kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#,
+	rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N, 
+# Some viewpoints have bad ROMs that foo up on ^O
+screwpoint|adds viewpoint with ^O bug,
+	cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
+
+# From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
+# The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.  
+# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
+# underline=01100000, rev=01010000, blink=01000010,dim=01000001,
+# invis=01000100 and %c is the logical or of desired attributes.
+# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
+vp3a+|viewpoint3a+|adds viewpoint 3a+, 
+	am, bw, 
+	cols#80, it#8, lines#24, 
+	civis=\027, clear=\E*$<80>, cnorm=\030, cr=\015, 
+	cub1=\010, cud1=\012, cuf1=\014, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013, 
+	ed=\EY$<80>, el=\ET, home=\036, ht=\011, ind=\012, 
+	kbs=\010, kcub1=\010, kcud1=\012, kcuf1=\014, 
+	kcuu1=\013, khome=\036, nel=\015\012, rmso=\E(, 
+	sgr=\E0%'@'%?%p1%tQ%|%;%?%p2%t%'`'%|%;%?%p3%tP%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%?%p7%tD%|%;%c\E),
+	sgr0=\E(, smso=\E0Q\E), 
+vp60|viewpoint60|addsvp60|adds viewpoint60, 
+	use=regent40,
+#
+# adds viewpoint 90 - from cornell
+# Note:  emacs sends ei occasionally to insure the terminal is out of
+#        insert mode. This unfortunately puts the viewpoint90 IN insert
+#        mode.  A hack to get around this is <ich1=\EF\s\EF^U>.  (Also,
+#   -    :ei=:im=: must be present in the termcap translation.)
+#   -    <xhp> indicates glitch that attributes stick to location
+#   -    <msgr> means it's safe to move in standout mode
+#   -    <clear=\EG\Ek>: clears screen and visual attributes without affecting
+#               the status line
+# Function key and label capabilities merged in from SCO.
+vp90|viewpoint90|adds viewpoint 90, 
+	bw, msgr, xhp, OTbs,
+	cols#80, lines#24, 
+	clear=\EG\Ek, cud1=^J, cub1=^H, cuf1=^F, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE, 
+	dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I, 
+	ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J, 
+	kcuf1=^F, kcuu1=^Z, khome=^A, ll=^A,
+	kf0=^B1^M, kf1=^B2^M, kf2=^B3^M, kf3=^B4^M, kf4=^B5^M, kf5=^B6^M,
+	kf6=^B7^M, kf7=^B8^M, kf8=^B9^M, kf9=^B:^M, kf10=^B;^M,
+	lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
+	lf6=F7, lf7=F8, lf8=F9, lf9=F10, lf10=F11,
+	rmso=\ER\E0@\EV, rmul=\ER\E0@\EV, sgr0=\ER\E0@\EV, 
+	smso=\ER\E0Q\EV, smul=\ER\E0`\EV, 
+# Note: if return acts weird on a980, check internal switch #2
+# on the top chip on the CONTROL pc board.
+adds980|a980|adds consul 980, 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J, cuf1=\E^E01, 
+	cup=\013%p1%'@'%+%c\E\005%p2%2d,
+	dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1, 
+	kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, 
+	kf7=\E7, kf8=\E8, kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N, 
+
+#### C. Itoh Electronics
+#
+# As of 1995 these people no longer make terminals (they're still in the
+# printer business).  Their terminals were all clones of the DEC VT series.
+# They're located in Orange County, CA.
+#
+#% C.Itoh: andy@cie.co.uk (Andy Hardy)
+
+# CIT 80  - vt-52 emulator, the termcap has been modified to remove
+#           the delay times and do an auto tab set rather than the indirect
+#           file used in vt100.
+cit80|cit-80|citoh 80, 
+	am, OTbs,
+	cols#80, lines#24, 
+	clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, 
+	cuu1=\E[A, ed=\EJ, el=\EK, ff=^L, ind=^J, is2=\E>, kcub1=\EOD, 
+	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmkx=\E[?1l\E>, 
+	smkx=\E[?1h\E=, 
+# From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
+# (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
+cit101|citc|C.itoh fast vt100, 
+	am, xenl, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U, 
+	dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, 
+	flash=\E[?5h$<200/>\E[?5l, 
+	ich1=\E[@, il1=\E[L, 
+	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g, 
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 
+	sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 
+# CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
+# The following termcap entry was created from the Callan cd100 entry.  The
+# last two lines (with the capabilities in caps) are used by RM-cobol to allow
+# full selection of combinations of reverse video, underline, and blink.
+# (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
+# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
+# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
+cit101e|C. Itoh CIT-101e, 
+	OTbs, OTpt, am, mir, msgr, 
+	cols#80, it#8, lines#24, 
+	acsc=, clear=\E[H\E[J, cnorm=, 
+	csr=\E[%i%p1%2d;%p2%2dr, cud1=\E[B, cuf1=\E[C, 
+	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, 
+	cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J, 
+	el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	kf0=\EOT, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, 
+	kf6=\EOl, kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, 
+	rmacs=^O, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, 
+	smacs=^N, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, 
+# From: David S. Lawyer, June 1997:
+# The CIT 101-e was made in Japan in 1983-4 and imported by CIE
+# Terminals in Irvine, CA.  It was part of CITOH Electronics.  In the
+# late 1980's CIT Terminals went out of business.
+# There is no need to use the initialization string is=... (by invoking
+# tset or setterm etc.) provided that the terminal has been manually set
+# up (and the setup saved with ^S) to be compatible with this termcap.  To be
+# compatible it should be in ANSI mode (not VT52).   A set-up that
+# works is to set all the manually setable stuff to factory defaults
+# by pressing ^D in set-up mode.  Then increse the brighness with the
+# up-arrow key since the factory default will likely be dim on an old
+# terminal.  Then change any options you want (provided that they are
+# compatible with the termcap).  For my terminal I set: Screen
+# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
+# on.  I also set up mine for parity (but you may not need it).  Then 
+# save the setup with ^S.
+# (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
+cit101e-rv|Citoh CIT-101e (sets reverse video), 
+	am, eo, mir, msgr, xenl, xon, 
+	cols#80, it#8, lines#24, 
+	OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, 
+	cbt=\E[Z, civis=\E[1v, clear=\E[H\E[J, 
+	cnorm=\E[0;3;4v, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[3;5v, 
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
+	ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>, 
+	home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 
+	ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 
+	ind=^J, indn=\E[%p1%dS, 
+	is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H, 
+	kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
+	kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
+	nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, 
+	rmir=\E[4l, rmso=\E[m, rmcup=, rmul=\E[m, 
+	rs1=\Ec\E[?7h\E[>5g, sc=\E7, sgr0=\E[m, 
+	smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, smso=\E[7m, 
+	smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, 
+	u7=\E[6n, u8=\E[?6c, u9=\E[c, 
+cit101e-n|CIT-101e w/o am, 
+	am@, 
+	cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, use=cit101e, 
+cit101e-132|CIT-101e with 132 cols, 
+	cols#132, 
+	kbs=^H, kcub1=^H, kcud1=^J, use=cit101e, 
+cit101e-n132|CIT-101e with 132 cols w/o am, 
+	am@, 
+	cols#132, 
+	cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, use=cit101e, 
+# CIE Terminals CIT-500 from BRL
+# The following SET-UP modes are assumed for normal operation:
+#	GENERATE_XON/XOFF:YES	DUPLEX:FULL		NEWLINE:OFF
+#	AUTOWRAP:ON		MODE:ANSI		SCREEN_LENGTH:64_LINES
+#	DSPLY_CNTRL_CODES?NO	PAGE_WIDTH:80		EDIT_MODE:OFF
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements.
+# Hardware tabs are assumed to be set every 8 columns; they can be set up
+# by the "reset", "tset", or "tabs" utilities.  No delays are specified; use
+# "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (cit500: I added <rmam>/<smam> based on the init string -- esr)
+cit500|CIE Terminals CIT-500, 
+	OTbs, OTpt, mir, msgr, xon, 
+	OTkn#10, cols#80, it#8, lines#64, vt#3, 
+	acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 
+	clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
+	ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, 
+	il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, 
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, 
+	kdl1=\E[M, ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, 
+	kf3=\EOS, kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, 
+	kf9=\EOZ, khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, 
+	lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, 
+	lf7=F18, lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, 
+	rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 
+	rmso=\E[m, rmul=\E[m, 
+	rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>, 
+	sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, 
+	smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
+
+# C. Itoh printers begin here
+citoh|ci8510|8510|c.itoh 8510a,
+	cols#80, ri=\Er, bold=\E!, smul=\EX, rmul=\EY, sgr0=\E"\EY, it#8,
+	is2=\E(009\054017\054025\054033\054041\054049\054057\054065\054073.,
+	rep=\ER%p2%03d%p1%c, cub1@, use=lpr,
+citoh-pica|citoh in pica,
+	is1=\EN, use=citoh,
+citoh-elite|citoh in elite,
+	is2=\E(009\054017\054025\054033\054041\054049\054057\054065\054073\054081\054089.,
+	is1=\EE, cols#96, use=citoh,
+citoh-comp|citoh in compressed,
+	is2=\E(009\054017\054025\054033\054041\054049\054057\054065\054073\054081\054089\054097\054105\054113\054121\054129.,
+	is1=\EQ, cols#136, use=citoh,
+# citoh has infinite cols because we don't want lp ever inserting \n\t**.
+citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
+	is1=\EP, cols#32767, use=citoh,
+citoh-6lpi|citoh in 6 lines per inch mode,
+	is3=\EA, use=citoh,
+citoh-8lpi|citoh in 8 lines per inch mode,
+	is3=\EB, lines#88, use=citoh,
+
+#### Control Data (cdc)
+#
+
+cdc456|cdc 456 terminal, 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, 
+	ed=^X, el=^V, home=^Y, il1=\EL, ind=^J, 
+
+# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
+cdc721|CDC Viking, 
+	OTbs, am, 
+	cols#80, lines#24, 
+	clear=^L, cuf1=^X, 
+	cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W, el=^K, 
+	home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, 
+	kcuu1=^W, khome=^Y, 
+cdc721ll|CDC Vikingll, 
+	OTbs, am, 
+	cols#132, lines#24, 
+	clear=^L, cuf1=^X, 
+	cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W, el=^K, 
+	home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, 
+	kcuu1=^W, khome=^Y, 
+# (cdc752: the BRL entry had :ll=\E1  ^Z: commented out
+cdc752|CDC 752, 
+	OTbs, am, bw, xhp, 
+	cols#80, lines#24, 
+	bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 
+	cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V, 
+	home=\E1\s\s, ind=^J, ll=^Y, 
+	rs1=\E1\s\s\030\002\003\017, 
+# CDC 756
+# The following switch/key settings are assumed for normal operation:
+#	96 chars	SCROLL		FULL duplex	not BLOCK
+# Other switches may be set according to communication requirements.
+# Insert/delete-character cannot be used, as the whole display is affected.
+# "so" & "se" are commented out until jove handles "sg" correctly.
+cdc756|CDC 756, 
+	OTbs, am, bw, 
+	OTkn#10, cols#80, lines#24, 
+	bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 
+	cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, 
+	dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, 
+	ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, 
+	kdch1=\EI, kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, 
+	kf3=\ED, kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, 
+	khome=^Y, khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, 
+	lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z, 
+	rs1=\031\030\002\003\017, 
+#
+# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
+#
+# Part of the long initialization string defines the "DOWN" key to the left
+# of the tab key to send an ESC.  The real ESC key is positioned way out 
+# in right field.
+#
+# The termcap won't work in 132 column mode due to the way it it moves the
+# cursor.  Termcap doesn't have the capability (as far as I could tell) to
+# handle the 721 in 132 column mode.
+#
+# (cdc721: changed :ri: to :sr: -- esr)
+cdc721-esc|Control Data 721,
+	OTbs, OTpt, am, bw, msgr, xon, 
+	OTkn#10, cols#80, it#8, lines#30, 
+	bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z, 
+	cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W, 
+	dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, 
+	hts=^^^RW, ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[, 
+	is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o, 
+	kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, khome=^Y, 
+	rmkx=^^^Rl, smkx=^^^Rk, 
+	kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, 
+	kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, ll=^B =, 
+	rev=^^D, ri=\036W =\036V, rmir=, 
+	rmso=^^E, rmul=^], sgr0=\017\025\035\036E\036\022\\, 
+	smir=, smso=^^D, smul=^\, tbc=^^^RY, 
+
+#### Getronics
+#
+# Getronics is a Dutch electronics company that at one time was called 
+# `Geveke' and made async terminals; but (according to the company itself!)
+# they've lost all their documentation on the command set.  The hardware
+# documentation suggests the terminals were actually manufactured by a
+# Taiwanese electronics company named Cal-Comp.  There are known
+# to have been at least two models, the 33 and the 50.
+#
+
+# The 50 seems to be a top end vt220 clone, with the addition of a higher
+# screen resolution, a larger screen, at least 1 page of memory above and
+# below the screen, apparently pages of memory right and left of the screen
+# which can be panned, and about 75 function keys (15 function keys x normal,
+# shift, control, func A, func B). It also has more setup possibilities than
+# the vt220. The monitor case is dated November 1978 and the keyboard case is
+# May 1982.
+#
+# The vt100 emulation works as is.  The entry below describes the rather
+# non-conformant (but more featureful) ANSI mode.
+#
+# From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
+visa50|geveke visa 50 terminal in ansi 80 character mode, 
+	bw, mir, msgr, 
+	cols#80, lines#25, 
+	acsc=0_aaffggjjkkllmmnnqqttuuvvwwxxh ooss, bel=^G, 
+	blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, 
+	cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, 
+	cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 
+	cuu1=\E[A, dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, 
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 
+	flash=\E[?5h\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 
+	ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 
+	il1=\E[L, ind=^J, invis=\E[8m, 
+	is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h, 
+	ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, 
+	kc3=\EOS, kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, 
+	kcuu1=\E[A, kdch1=\177, kdl1=\EOS, kf0=\E010, 
+	kf1=\E001, kf10=\E011, kf2=\E002, kf3=\E003, 
+	kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007, 
+	kf8=\E008, kf9=\E009, khome=\E[f, 
+	lf2=A delete char, lf3=A insert line, 
+	lf4=A delete line, lf5=A clear, lf6=A ce of/cf gn, 
+	lf7=A print, lf8=A on-line, lf9=A funcl0=A send, 
+	nel=^M^J, rev=\E[7m, rmacs=\E[3l, rmam=\E[?7l, 
+	rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m, rmul=\E[0m, 
+	sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h, smir=\E[4h, 
+	smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, 
+	vpa=\E[%i%p1%dd, 
+
+#### Human Designed Systems (Concept)
+#
+#	Human Designed Systems
+#	400 Fehley Drive
+#	King of Prussia, PA 19406
+#	Vox: (610)-277-8300
+#	Fax: (610)-275-5739
+#	Net: support@hds.com
+# 
+# John Martin <john@hds.com> is their termcap expert.  They're mostly out of
+# the character-terminal business now (1995) and making X terminals.  In
+# particular, the whole `Concept' line described here was discontinued long
+# ago.
+#
+
+# From: <vax135!hpk>  Sat Jun 27 07:41:20 1981
+# Extensive changes to c108 by arpavax:eric Feb 1982
+# Some unknown person at SCO then translated it to terminfo.
+#
+# There seem to be a number of different versions of the C108 PROMS
+# (with bug fixes in its Z-80 program).
+# 
+# The first one that we had would lock out the keyboard of you
+# sent lots of short lines (like /usr/dict/words) at 9600 baud.
+# Try that on your C108 and see if it sends a ^S when you type it.
+# If so, you have an old version of the PROMs.
+# 
+# You should configure the C108 to send ^S/^Q before running this.
+# It is much faster (at 9600 baud) than the c100 because the delays
+# are not fixed.
+# new status line display entries for c108-8p:
+# <is3> - init str #3 - setup term for status display - 
+# set programmer mode, select window 2, define window at last 
+# line of memory, set bkgnd stat mesg there, select window 0.
+# 
+# <tsl> - to status line - select window 2, home cursor, erase to 
+# end-of-window, 1/2 bright on, goto(line#0, col#?)
+# 
+# <fsl> - from status line - 1/2 bright off, select window 0
+# 
+# <dsl> - disable status display - set bkgnd status mesg with 
+# illegal window #
+# 
+# There are probably more function keys that should be added but 
+# I don't know what they are.
+#
+# No delays needed on c108 because of ^S/^Q handshaking
+#
+c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
+	is3=\EU\E z"\Ev^A\177 !p\E ;"\E z \Ev  ^A\177p\Ep\n,
+	rmcup=\Ev  ^A\177p\Ep\r\n, use=c108-4p,
+c108-4p|concept108-4p|concept 108 w/4 pages,
+	hs, eslok, dch1=\E\s1$<16*>, OTbs,
+	acsc=l\\qLkTxUmMjE, rmacs=\Ej\s, smacs=\Ej!,
+	tsl=\E\sz"\E?\E^E\EE\Ea\s%+\s, fsl=\Ee\E\sz\s, dsl=\E\s;\177,
+	is3=\EU\E\sz"\Ev\177 !p\E\s;"\E\sz\s\Ev\s\s^A p\Ep\n,
+	xon, is1=\EK\E!\E\sF,
+	smcup=\EU\Ev\s\s8p\Ep\r\E^U, rmcup=\Ev\s\s^A p\Ep\r\n,
+	cvvis=\EW, cnorm=\Ew,
+	pb@, cr=^M, ind=^J,
+	cup=\Ea%p1%?%p1%{95}%>%t^A%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t^A%{96}%-%;%{32}%+%c,
+	use=c100,
+c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
+	smcup=\EU\Ev  8p\Ep\r, rmcup=\Ev  ^B p\Ep\r\n, use=c108-rv-4p, 
+c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
+	flash=\EK$<200>\Ek, is1=\Ek, smso=\EE, rmso=\Ee,
+	use=c108-4p, 
+c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
+	is1=\E F\E",
+	smcup=\EU\Ev  8^AD\Ep\r, rmcup=\Ev  ^A0^AD\Ep\r\n,
+	cols#132, use=c108-8p,
+
+# Concept 100:
+# These have only window relative cursor addressing, not screen 
+# relative. To get it to work right here, smcup/rmcup (which 
+# were invented for the concept) lock you into a one page 
+# window for screen style programs.
+# 
+# To get out of the one page window, we use a clever trick:
+# we set the window size to zero ("\Ev    " in rmcup) which the 
+# terminal recognizes as an error and resets the window to all 
+# of memory.
+# 
+# This trick works on c100 but does not on c108, sigh.
+# 
+# Some tty drivers use cr3 for concept, others use nl3, hence 
+# the delays on cr and ind below. This padding is only needed at 
+# 9600 baud and up.  One or the other is commented out depending on 
+# local conventions.
+# 
+# 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe 
+# less than 6 but more than 2 will work.
+# 
+# Note: can't use function keys f7-f10 because they are 
+# indistinguishable from arrow keys (!), also, del char and 
+# clear eol use xon/xoff so they probably won't work very well.
+# 
+# Also note that we don't define insrt/del char/delline/eop/send 
+# because they don't transmit unless we reset them - I figured 
+# it was a bad idea to clobber their definitions.
+# 
+# The <mc5> sequence changes the escape character to ^^ so that 
+# escapes will be passed through to the printer. Only trouble 
+# is that ^^ won't be - ^^ was chosen to be unlikely. 
+# Unfortunately, if you're sending raster bits through to be 
+# plotted, any character you choose will be likely, so we lose.
+#
+# \EQ"\EY(^W (send anything from printer to host, for xon/xoff) 
+# cannot be # in is2 because it will hang a c100 with no printer 
+# if sent twice.
+c100|concept100|concept|c104|c100-4p|hds concept 100,
+	is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E^G!\E^HA@ \E4#:"\E:a\E4#;"\E:b\E4#<"\E:c,
+	is1=\EK, is3=\Ev    $<6>\Ep\n, OTbs,
+	cr=$<9>^M, ind=^J,
+	bel=^G, cud1=^J, clear=\E?\E^E$<2*>,
+	smcup=\EU\Ev  8p\Ep\r\E^U$<16>, rmcup=\Ev    $<6>\Ep\r\n,
+	il1=\E^R$<3*>, am, cub1=^H, ed=\E^E$<16*>, el=\E^U$<16>,
+	cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cols#80, dch1=\E^Q$<16*>, dl1=\E^B$<3*>,
+	rmir=\E\s\s, eo, smir=\E^P, ip=$<16*>, lines#24, mir, cuf1=\E=,
+	ht=\t$<8>, kbs=^h, ul, cuu1=\E;, smul=\EG, rmul=\Eg,
+	xenl, flash=\Ek$<200>\EK, pb#9600, vt#8,
+	smul=\EG, rmul=\Eg, smso=\ED, rmso=\Ed,
+	dim=\EE, rev=\ED, blink=\EC, prot=\EI, invis=\EH, sgr0=\EN@,
+	rep=\Er%p1%c%p2%{32}%+%c$<.2*>, smkx=\EX, rmkx=\Ex,
+	kcuu1=\E;, kcud1=\E<, kcub1=\E>, kcuf1=\E=, khome=\E?, kcbt=\E',
+	kf1=\E5, kf2=\E6, kf3=\E7, kf4=\E8, kf5=\E9,
+	kf6=\E:a, kf7=\E:b, kf8=\E:c,
+	kich1=\E^P, krmir=\E\0, kdch1=\E^Q, kil1=\E^R, kdl1=\E^B,
+	kel=\E^S, ked=\E^C, kpp=\E., knp=\E-, kind=\E[, kri=\E\\,
+	khts=\E], kctab=\E_,
+	mc5=\EQ"\EY(^W\EYD\Eo ^^, mc4=^^o \E\EQ!\EYP^W, pb#9600,
+c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
+	is1=\Ek, flash=\EK$<200>\Ek, cvvis@, cnorm@,
+	smso=\EE, rmso=\Ee,
+	use=c100,
+oc100|oconcept|c100-1p|old 1 page concept 100,
+	in, is3@,
+	use=c100,
+
+# From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
+# Lots of notes, originally inline, but ncurses doesn't grok that.
+#
+# am: 	not available in power on mode, but turned on with \E[=107;207h in
+#	is2=.  Also, \E=124l in is2= could have been used to prevent needing
+#	to specify xenl:, but that would have rendered the last space on the
+#	last line useless.
+# bw:	Not available in power on mode, but turned on with \E[=107;207h in
+#	is2=.
+# clear: Could be done with \E[2J alone, except that vi (and probably most
+#	other programs) assume that this also homes the cursor.
+# dsl:	Go to window 2, go to the beginning of the line, use a line feed to
+#	scroll the window, and go back to window 1.
+# is2:	the string may cause a warning to be issued by tic that it
+#	found a very long line and that it suspects that a comma is missing
+#	somewhere.  This warning can be ignored (unless it comes up more than
+#	once).  The initialization string contains the following commands:
+#
+#	 [Setup mode items changed from factory defaults:]
+#		\E)0			set alternate character set to
+#						graphics
+#		^O			set character set to default
+#	 [In case it wasn't]
+#		\E[m			turn off all attributes
+#	 [In case they weren't off]
+#		\E[=107;		cursor wrap and
+#			207h			character wrap on
+#		\E[90;3u		set Fkey definitions to "transmit"
+#						defaults
+#		\E[92;3u		set cursor key definitions to
+#						"transmit" defaults
+#		\E[43;1u		set shift F13 to transmit...
+#		\177\E$P\177
+#		\E[44;1u		set shift F14 to transmit...
+#			\177\E$Q\177
+#		\E[45;1u		set shift F15 to transmit...
+#			\177\E$R\177
+#		\E[46;1u		set shift F16 to transmit...
+#			\177\E$S\177
+#		\E[200;1u		set shift up to transmit...
+#			\177\E$A\177
+#		\E[201;1u		set shift down to transmit...
+#			\177\E$B\177
+#		\E[202;1u		set shift right to transmit...
+#			\177\E$C\177
+#		\E[203;1u		set shift left to transmit...
+#			\177\E$D\177
+#		\E[204;1u		set shift home to transmit...
+#			\177\E$H\177
+#		\E[212;1u		set backtab to transmit...
+#			\177\E$I\177
+#		\E[213;1u		set shift backspace to transmit...
+#			\177\E$^H\177
+#		\E[214;1u		set shift del to transmit...
+#			"\E$\177"
+#	 [Necessary items not mentioned in setup mode:]
+#		\E[2!w			move to window 2
+#		\E[25;25w		define window as line 25 of memory
+#		\E[!w			move to window 1
+#		\E[2*w			show current line of window 2 as
+#						status line
+#		\E[2+x			set meta key to use high bit
+#		\E[;3+}			move underline to bottom of character
+#
+#	All Fkeys are set to their default transmit definitions with \E[90;3u
+#	in is2=.  IMPORTANT:  to use this terminal definition, the "quit" stty
+#	setting MUST be redefined or deactivated, because the default is
+#	contained in almost all of this terminal's Fkey strings!  If for some
+#	reason "quit" cannot be altered, the Fkeys can, but it would be
+#	necessary to change ^| to ^] in all of these definitions, and add
+#	\E[2;029!t to is2.
+# lines: is set to 24 because this terminal refuses to treat the 25th
+#	line normally.
+# ll:	Not available in power on mode, but turned on with \E[=107;207h in
+#	is2=.
+# lm:	Pointless, given that this definition locks a single screen of
+#	memory into view, but what the hey...
+# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
+#	other attributes alone), but some programs expect this to turn off
+#	everything.
+# rmul: Could use \E[4!{ to turn off only underline (leaving any other
+#	attributes alone), but some programs expect this to turn off
+#	everything.
+# sgr:	Attributes are set on this terminal with the string \E[ followed by
+#	a list of attribute code numbers (in decimal, separated by
+#	semicolons), followed by the character m.  The attribute code
+#	numbers are:
+#		  1 for bold;
+#		  2 for dim (which is ignored in power on mode);
+#		  4 for underline;
+#		  5 for blinking;
+#		  7 for inverse;
+#		  8 for not displayable; and
+#		=99 for protected (except that there are strange side
+#		effects to protected characters which make them inadvisable).
+#	 The mapping of terminfo parameters to attributes is as follows:
+#		%p1 (standout) = bold and inverse together;
+#		%p2 (underline) = underline;
+#		%p3 (reverse) = inverse;
+#		%p4 (blink) = blinking;
+#		%p5 (dim) is ignored;
+#		%p6 (bold) = bold;
+#		%p7 (invisible) = not displayable;
+#		%p8 (protected) is ignored; and
+#		%p9 (alt char set) = alt char set.
+#	 The code to do this is:
+#		\E[0		OUTPUT	\E[0
+#		%?%p1%p6%O	IF	(standout; bold) OR
+#		%t;1		THEN	OUTPUT	;1
+#		%;		ENDIF
+#		%?%p2		IF	underline
+#		%t;4		THEN	OUTPUT	;4
+#		%;		ENDIF
+#		%?%p4		IF	blink
+#		%t;5		THEN	OUTPUT	;5
+#		%;		ENDIF
+#		%?%p1%p3%O	IF	(standout; reverse) OR
+#		%t;7		THEN	OUTPUT	;7
+#		%;		ENDIF
+#		%?%p7		IF	invisible
+#		%t;8		THEN	OUTPUT	;8
+#		%;		ENDIF
+#		m		OUTPUT	m
+#		%?%p9		IF	altcharset
+#		%t^N		THEN	OUTPUT	^N
+#		%e^O		ELSE	OUTPUT	^O
+#		%;		ENDIF
+# sgr0: Everything is turned off (including alternate character set), since
+#	there is no way of knowing what it is that the program wants turned
+#	off.
+# smul: The "underline" attribute is reconfigurable to an overline or
+#	strikethru, or (as done with \E[;3+} in is2=), to a line at the true
+#	bottom of the character cell.  This was done to allow for more readable
+#	underlined characters, and to be able to distinguish between an
+#	underlined space, an underscore, and an underlined underscore.
+# xenl: Terminal can be configured to not need this, but this "glitch"
+#	behavior is actually preferable with autowrap terminals.
+#
+# Parameters kf31= thru kf53= actually contain the strings sent by the shifted
+# Fkeys.  There are no parameters for shifted Fkeys in terminfo.  The is2
+# string modifies the 'O' in kf43 to kf46 to a '$'.
+#
+# kcbt was originally ^I but redefined in is2=.
+# kHOM was \E[H originally but redefined in is2=, as were a number of
+# other keys.
+# kDC was originally \177 but redefined in is2=.
+#
+# kbs:	Shift was also ^H originally but redefined as \E$^H in is2=.
+# tsl:	Go to window 2, then do an hpa=.
+#
+#------- flash=\E[8;3!}^G\E[3;3!}
+#------- flash=\E[?5h$<100>\E[?5l
+# There are two ways to flash the screen, both of which have their drawbacks. 
+# The first is to set the bell mode to video, transmit a bell character, and
+# set the bell mode back - but to what?  There is no way of knowing what the
+# user's old bell setting was before we messed with it.  Worse, the command to
+# set the bell mode also sets the key click volume, and there is no way to say
+# "leave that alone", or to know what it's set to, either.
+# The second way to do a flash is to set the screen to inverse video, pad for a
+# tenth of a second, and set it back - but like before, there's no way to know
+# that the screen wasn't ALREADY in inverse video, or that the user may prefer
+# it that way.  The point is moot anyway, since vi (and probably other
+# programs) assume that by defining flash=, you want the computer to use it
+# INSTEAD of bel=, rather than as a secondary type of signal.
+#
+#------- cvvis=\E[+{
+# The is the power on setting, which is also as visible as the cursor
+# gets.
+#-------  wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
+# Windowing is possible, but not defined here because it is also used to
+# emulate status line functions.  Allowing a program to set a window could
+# clobber the status line or render it unusable.  There is additional memory,
+# but screen scroll functions are destructive and do not make use of it.
+#
+#-------   dim=			Not available in power on mode.
+# You have a choice of defining low intensity characters as "half bright" and
+# high intensity as "normal", or defining low as "normal" and high as "bold". 
+# No matter which you choose, only one of either "half bright" or "bold" is
+# available at any time, so taking the time to override the default is
+# pointless.
+#
+#-------  prot=\E[=0;99m
+# Not defined, because it appears to have some strange side effects.
+#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
+#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
+#-------   pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
+#	 Available, but making them available to programs is inadvisable.
+#	 The code to do this is:
+#		%?%p1%{24}%<	IF	((key; 24) <;
+#		%p1%{30}%>		 ((key; 30) >;
+#		%p1%{54}%<		  (key; 54) <
+#		%A			 ) AND
+#		%O		  	) OR
+#	 [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
+#		%t\E[		THEN	OUTPUT	\E[
+#		%p1%d			OUTPUT	(key) as decimal
+#	 [next line applies to pfx only]
+#		;1			OUTPUT	;1
+#		u			OUTPUT	u
+#		\177			OUTPUT	\177
+#		%p2%s			OUTPUT	(string) as string
+#		\177			OUTPUT	\177
+#	 [DEL chosen as delimiter, but could be any character]
+#	 [implied:		ELSE	do nothing]
+#		%;		ENDIF
+#	
+#-------   rs2=
+# Not defined since anything it might do could be done faster and easier with
+# either Meta-Shift-Reset or the main power switch.
+#
+#-------  smkx=\E[1!z
+#-------  rmkx=\E[!z
+# These sequences apply to the cursor and setup keys only, not to the
+# numeric keypad.  But it doesn't matter anyway, since making these
+# available to programs is inadvisable.
+# For the key definitions below, all sequences beginning with \E$ are
+# custom and programmed into the terminal via is2.  \E$ also has no
+# meaning to any other terminal.
+#
+#------- cmdch=\E[;%p1%d!t
+# Available, but making it available to programs is inadvisable.
+#------- smxon=\E[1*q
+# Available, but making it available to programs is inadvisable.
+# Terminal will send XON/XOFF on buffer overflow.
+#------- rmxon=\E[*q
+# Available, but making it available to programs is inadvisable.
+# Terminal will not notify on buffer overflow.
+#-------   smm=\E[2+x
+#-------   rmm=\E[+x
+# Available, but making them available to programs is inadvisable.
+#
+# Printing:
+#	 It's not made clear in the manuals, but based on other ansi/vt type
+#	 terminals, it's a good guess that this terminal is capable of both
+#	 "transparent print" (which doesn't copy data to the screen, and
+#	 therefore needs mc5i: specified to say so) and "auxilliary print"
+#	 (which does duplicate printed data on the screen, in which case mc4=
+#	 and mc5= should use the \E[?4i and \E[?5i strings instead).
+#
+# (esr: I have commented out is2 in order to avoid overflowing termcap's
+# 1024-byte limit.)
+
+hds200|Human Designed Systems HDS200, 
+	am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon, 
+	cols#80, it#8, lines#24, lm#0, 
+	acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 
+	blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{, 
+	clear=\E[H\E[J, cnorm=\E[+{, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 
+	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
+	dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K, 
+	fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 
+	ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 
+	invis=\E[0;8m, 
+	.is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+}, 
+	kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H, 
+	kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r, 
+	kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ, 
+	kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r, 
+	kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r, 
+	kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r, 
+	kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r, 
+	kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r, 
+	kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r, 
+	kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r, 
+	kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, 
+	kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, 
+	kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H, 
+	kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A, 
+	mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8, 
+	rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017, 
+	rmul=\E[m\017, sc=\E7, 
+	sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 
+	sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m, 
+	smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG, 
+	vpa=\E[%i%p1%dd, 
+
+# <ht> through <el> included to specify padding needed in raw mode.
+# (avt-ns: added empty <acsc> to suppress a tic warning --esr)
+avt-ns|concept avt no status line,
+	am, eo, mir, ul, xenl, xon, OTbs,
+	cols#80, it#8, lines#24, lm#192,
+	acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+	clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=\r,
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
+	cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+	cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{,
+	dl=\E[%p1%dM$<4*>, dl1=\E[M$<4>, ed=\E[J$<96>,
+	el=\E[K$<6>, home=\E[H, hpa=\E[%p1%{1}%+%dG,
+	ht=\t$<4>, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+	il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
+	invis=\E8m, ip=$<4>, is1=\E[=103l\E[=205l,
+	is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0:0:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
+	kbs=\b, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+	kcuu1=\E[A, kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP,
+	kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
+	kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H, mc0=\E[0i,
+	mc4=\E[4i, mc5=\E[5i, pfloc=\E[%p1%d;0u#%p2%s#,
+	pfx=\E[%p1%d;1u#%p2%s#, prot=\E[99m, rc=\E8,
+	rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM$<4>,
+	rmacs=^N$<1>, rmcup=\E[w\E2\r\n, rmir=\E4l,
+	rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{, sc=\E7,
+	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
+	sgr0=\E[m, smacs=^O$<1>, smcup=\E[=4l\E[1;24w\E2\r,
+	smir=\E1, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
+	tbc=\E[2g, vpa=\E[%p1%{1}%+%dd,
+avt-rv-ns|concept avt in reverse video mode/no status line,
+	is1=\E[=103l\E[=205h, flash=\E[=205l$<200>\E[=205h,
+	use=avt-ns,
+avt-w-ns|concept avt in 132 column mode/no status line,
+	is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
+	use=avt-ns,
+avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
+	is1=\E[=103h\E[=205h, smcup=\E[H\E[1;24;1;132w,
+	flash=\E[=205l$<200>\E[=205h,
+	use=avt-ns,
+
+# Concept AVT with status line. We get the status line using the
+# "Background status line" feature of the terminal. We swipe the
+# first line of memory in window 2 for the status line, keeping
+# 191 lines of memory and 24 screen lines for regular use.
+# The first line is used instead of the last so that this works
+# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
+# assumes an 8 page AVT but lm isn't currently used anywhere.)
+#
+avt+s|concept avt status line changes,
+	is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
+	tsl=\E[2;1!w\E[;%p1%dH\E[2K, fsl=\E[1;1!w, eslok, hs,
+	dsl=\E[0*w, lm#191, smcup=\E[2;25w\E2\r, rmcup=\E[2w\E2\r\n,
+	.wind=\E[%i%p1%{1}%+%d;%p2%d;%p3%{01}%+%d;%p4%{01}%+%dw,
+avt|avt-s|concept-avt|avt w/80 columns,
+	use=avt+s, use=avt-ns,
+avt-rv|avt-rv-s|avt reverse video w/sl,
+	is1=\E[=103l\E[=205h, flash=\E[=205l$<200>\E[=205h,
+	use=avt+s, use=avt-ns,
+avt-w|avt-w-s|concept avt 132 cols+status,
+	is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
+	use=avt+s, use=avt-ns,
+avt-w-rv|avt-w-rv-s|avt wide+status+rv,
+	is1=\E[=103h\E[=205h, smcup=\E[H\E[1;24;1;132w,
+	flash=\E[=205l$<200>\E[=205h,
+	use=avt+s, use=avt-ns,
+
+#### Contel Business Systems. 
+#
+
+# Contel c300 and c320 terminals. 
+contel300|contel320|c300|Contel Business Systems C-300 or C-320,
+	am, in, xon,
+	cols#80, lines#24, xmc#1,
+	bel=^G, clear=\EK, cr=\r, cub1=\b, cud1=\n, cuf1=\EC,
+	cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
+	dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
+	el=\EI$<5.5>, flash=^P^B$<200/>^P^C, home=\EH, hts=\E1,
+	ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>, kbs=\b,
+	kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
+	kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI,
+	ll=\EH\EA, rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
+# Contel c301 and c321 terminals.
+contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321, 
+	flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>, 
+	use=contel300,
+
+#### Data General (dg)
+#
+# According to James Carlson <carlson@xylogics.com> writing in January 1995,
+# the terminals group at Data General was shut down in 1991; all these
+# terminals have thus been discontinued.
+#
+
+# According to the 4.4BSD termcap file, the dg200 <cup> should be the
+# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
+# notation that's "^P%r%+\200%+\200").  Those \200s are suspicious,
+# maybe they were originally nuls (which would fit).
+dg200|data general dasher 200,
+	am, bel=^G, bw, clear=^L, cols#80, cr=^M, OTbs,
+	cub1=^Y, cud1=^Z, cuf1=^X, cup=^P%p2%c%p1%c, cuu1=^W,
+	el=^K, home=^H, ind=^J, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W,
+	kf0=^^z, kf1=^^q, kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w,
+	kf8=^^x, kf9=^^y, khome=^H, lf0=f10,
+	lines#24, nel=^J, rmso=^^E, rmul=^U, smso=^^D, smul=^T,
+# Data General 210/211 (and 410?)	from Lee Pearson (umich!lp) via BRL
+dg210|dg-ansi|Data General 210/211, 
+	am, 
+	cols#80, lines#24, 
+	OTnl=\E[B, clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH,
+	cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D, kcud1=\E[B,
+	kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m,
+	rmul=\E[0;m, smso=\E[7;m, smul=\E[4;m,
+# From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
+# courtesy of Carlos Rucalde of Vantage Software, Inc.
+# (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
+# I suspect the d200 function keys actually work on the dg211, check it out.)
+dg211|Data General d211, 
+	cnorm=^L, cvvis=^L^R, ht=^I, 
+	ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@, kf4@, kf5@, 
+	kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L, 
+	rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, 
+	use=dg200,
+# dg450 from cornell
+dg450|dg6134|data general 6134, 
+	cub1@, cuf1=^X,
+	use=dg200,
+# Note: lesser Dasher terminals will not work with vi because vi insists upon
+# having a command to move straight down from any position on the bottom line
+# and scroll the screen up, or a direct vertical scroll command.  The 460 and
+# above have both, the D210/211, for instance, has neither.  We must use ANSI
+# mode rather than DG mode because standard UNIX tty drivers assume that ^H is
+# backspace on all terminals.  This is not so in DG mode.
+# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
+# grounds that there is no matching ":ml:"
+# fixed garbled ":k9=\E[00\:z:" capability -- esr)
+dg460-ansi|Data General Dasher 460 in ANSI-mode, 
+	am, msgr, ul, OTbs,
+	cols#80, it#8, lines#24, 
+	OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, 
+	cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, 
+	cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl1=\E[M, ed=\E[J, 
+	el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, ht=\t, ind=\E[S, 
+	is2=^^F@, kbs=\E[D, kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, kf0=\E[001z, kf1=\E[002z, 
+	kf2=\E[003z, kf3=\E[004z, kf4=\E[005z, kf5=\E[006z, 
+	kf6=\E[007z, kf7=\E[008z, kf8=\E[009z, kf9=\E[010z, 
+	khome=\E[H, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, 
+	lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m, 
+	ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, 
+	smso=\E[7m, smul=\E[4m, 
+# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw>
+# Data General 605x     
+# Ought to work for a Model 6242, Type D210 as well as a 605x.
+# Note that the cursor-down key transmits ^Z.  Job control users, beware!
+# This also matches a posted description of something called a `Dasher 100'
+# so there's a dg100 alias here. 
+# (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr) 
+dg6053|dg100|data general 6053, 
+	OTbs, am, bw, ul, 
+	cols#80, lines#24, 
+	OTbc=^Y, bel=^G, clear=\014, cnorm=\014, cr=\015, cub1=\031, 
+	cud1=\032, cuf1=\030, cup=^P%p2%c%p1%c, cuu1=\027, 
+	cvvis=\014\022, el=\013, home=\010, ht=\011, 
+	is2=\022, kbs=\031, kcub1=\031, kcud1=\032, 
+	kcuf1=\030, kcuu1=\027, kf0=\036q, kf1=\036r, 
+	kf2=\036s, kf3=\036t, kf4=\036u, kf5=\036v, 
+	kf6=\036w, kf7=\036x, kf8=\036y, kf9=\036z, khome=\010, 
+	rmcup=\014, rmso=\0\036E, 
+	rmul=\025, smcup=\014\022, 
+	smso=\0\0\0\0\0\036D, smul=\024, 
+
+#### Datamedia (dm)
+#
+# Datamedia was headquartered in Nashua, New Hampshire in 1993.
+# As of early 1996, at least one company called `Datamedia' has been taken
+# over by:
+#
+#    Axent Technologies, Inc.
+#    2400 Research Boulevard
+#    Rockville, Maryland 20850
+#    voice: +1 301/258-5043
+#      fax: +1 301/330-5756
+#    email: <info@axent.com>
+#
+# makers of OmniGuard client/server security software.  They are a software
+# only company and no longer make terminals.  However, the operator there
+# told me that she had once spoken to a customer looking for Datamedia
+# terminals who'd mentioned a Datamedia in New Jersey.  This is backed up
+# by comp.terminals poosting describing the ID plate on the back of a
+# "Datamedia 3000" terminal.  Was this an earlier incarnation of Axent?
+# Inquiring minds want to know...
+#
+
+cs10|colorscan|Datamedia Color Scan 10,
+	msgr,
+	cols#80, lines#24,
+	bel=^G, clear=\E[H\E[J, cr=\r, cub1=\b, cud1=\n, cuf1=\E[C,
+	cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K, ind=\n,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+	rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+cs10-w|Datamedia Color Scan 10 with 132 columns,
+	cols#132,
+	cup=\E[%i%p1%02d;%p2%03dH,
+	use=cs10,
+
+# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
+dm1520|dm1521|datamedia 1520, 
+	am, xenl, OTbs,
+	cols#80, it#8, lines#24, 
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\, 
+	cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, 
+	el=^], home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, 
+	kcuu1=^_, khome=^Y, 
+# dm2500: this terminal has both <ich> and <smir>. Applications using 
+# termcap/terminfo directly (rather than through ncurses) might be confused.
+dm2500|datamedia2500|datamedia 2500, 
+	OTnc, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\, 
+	cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z, 
+	dch1=\020\010\030\035$<10*>, dl1=\020\032\030\035$<10*>, 
+	el=^W, home=^B, ich1=\020\034\030\035$<10*>, 
+	il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377, rmdc=^X^], 
+	rmir=\377\377\030\035$<10>, rmso=^X^], smdc=^P, 
+	smir=^P, smso=^N, 
+# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
+# also, has a meta-key.
+# From: <goldberger@su-csli.arpa>
+# (dmchat: ":MT:" changed to ":km:" -- esr)
+dmchat|dmchat version of datamedia 2500, 
+	km, 
+	dl1=\020\032\030\035$<2/>, 
+	il1=\020\n\030\035\030\035$<1*/>,
+	use=dm2500,
+# (dm3025: ":MT:" changed to ":km:" -- esr)
+dm3025|datamedia 3025a, 
+	km, OTbs,
+	cols#80, it#8, lines#24, 
+	bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 
+	cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, 
+	dch1=^H$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK, 
+	home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>, is2=\EQ\EU\EV, 
+	rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP, smir=\EP, smso=\EO1, 
+dm3045|datamedia 3045a, 
+	am, eo, km@, ul, xenl, OTbs,
+	dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, 
+	kcuu1=\EA, kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, 
+	kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, 
+	kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r, khome=\EH, 
+	pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@, 
+	use=dm3025,
+# Datamedia DT80 soft switches:
+# 1	0=Jump  1=Smooth
+# 	Autorepeat 	0=off  1=on
+# 	Screen		0=Dark 1=light
+# 	Cursor		0=u/l  1=block
+# 
+# 2	Margin Bell	0=off  1=on
+# 	Keyclick	0=off  1=on
+# 	Ansi/VT52	0=VT52 1=Ansi
+# 	Xon/Xoff	0=Off  1=On
+# 
+# 3	Shift3		0=Hash 1=UK Pound
+# 	Wrap		0=Off  1=On
+# 	Newline		0=Off  1=On
+# 	Interlace	0=Off  1=On
+# 	
+# 4	Parity		0=Odd  1=Even
+# 	Parity		0=Off  1=On
+# 	Bits/Char	0=7    1=8
+# 	Power		0=60Hz 1=50Hz
+# 
+# 5	Line Interface  0=EIA  1=Loop
+# 	Aux Interface   0=EIA  1=Loop
+# 	Local Copy    	0=Off  1=On	
+# 	Spare
+# 
+# 6	Aux Parity	0=Odd  1=Even
+# 	Aux Parity	0=Off  1=On
+# 	Aux Bits/Char   0=7    1=8
+# 	CRT Saver	0=Off  1=On
+# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
+dm80|dmdt80|dt80|datamedia dt80/1, 
+	clear=\E[2J\E[H, cud1=^J, cuf1=\E[C, 
+	cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 
+	home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+	ri=\EM, rmso=\E[m, rmul=\E[m, 
+	sgr0=\E[m, smso=\E[7m, smul=\E[4m, use=vt100,
+# except in 132 column mode, where it needs a little padding.
+# This is still less padding than the vt100, and you can always turn on
+# the ^S/^Q handshaking, so you can use vt100 flavors for things like
+# reverse video.
+dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode, 
+	cols#132, 
+	clear=\E[H\E[2J$<50/>, cud1=^J, cup=\E[%i%p1%d;%p2%dH$<5/>, 
+	cuu1=\E[A$<5/>, ed=\E[0J$<20/>, el=\E[0K$<20/>,
+	use=dm80,
+# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995
+dt80-sas|Datamedia DT803/DTX for SAS usage,
+	bw,am,
+	cols#80, lines#24,
+	acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
+	bel=^G, cr=^M,csr=\E=%p1%'\s'%+%c%'\s'%c\E#1\E=%p2%'\s'%+%c%'\s'%c\E#2,
+	tbc=\E'0, clear=^L, el=^], ed=^K, cup=\E=%p2%'\s'%+%c%p1%'\s'%+%c,
+	cud1=\EB, home=^Y, cub1=^H, cuf1=^\, cuu1=^_, dl1=\EM, smacs=\EF,
+	rev=\E$2^D, smso=\E$2^D, rmacs=\EG, sgr0=^X, rmso=^X, ff=^L,
+	is2=\E)0\E<\EP\E'0\E$2, il1=\EL, kclr=^L, kcud1=^J, kel=^], ked=^K,
+	khome=^Y, kcub1=^H, kcuf1=^\, kcuu1=^_, mc4=^O, mc5=^N,	ind=\EB,
+	ri=\EI, hts=\E'1, ht=^I,
+
+# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
+# These aren't end-all Excel termcaps; but do insert/delete char/line
+# and name some of the extra function keys.  (Mike Feldman ccvaxa!feldman)
+# The naming convention has been bent somewhat, with the use of E? (where
+# E is for 'Excel') as # a name.  This was done to distinguish the entries
+# from the other Datamedias in use here, and yet to associate a model of
+# the Excel terminals with the regular datamedia terminals that share
+# major characteristics.
+excel62|excel64|datamedia Excel 62, 
+	dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, 
+	kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, 
+	use=dt80, 
+excel62-w|excel64-w|datamedia Excel 62 in 132 char mode, 
+	dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, 
+	kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, 
+	use=dt80w, 
+excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode, 
+	dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J, 
+	kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, 
+	smir=\E[4h, 
+	use=dt80, 
+
+#### Falco
+#
+#	Falco Data Products
+#	440 Potrero Avenue
+#	Sunnyvale, CA 940864-196
+#	Vox: (800)-325-2648
+#	Fax: (408)-745-7860
+#	Net: techsup@charm.sys.falco.com
+#
+# Current Falco models as of 1995 are generally ANSI-compatible and support
+# emulations of DEC VT-series, Wyse, and Televideo types.
+#
+
+# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
+# This terminal was released around 1983 and was discontinued long ago.
+# The standout and underline highlights are the same.
+falco|ts1|ts-1|falco ts-1, 
+	am, OTbs,
+	cols#80, it#8, lines#24, 
+	bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE, 
+	ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 
+	kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, 
+	sgr0=\Eg0, smir=\Eq, smso=\Eg1, smul=\Eg1, 
+falco-p|ts1p|ts-1p|falco ts-1 with paging option, 
+	am, da, db, mir, msgr, ul, OTbs,
+	cols#80, it#8, lines#24, 
+	bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A, 
+	dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
+	il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, 
+	rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, 
+	smir=\Eq, smso=\Eg4, smul=\Eg1, 
+# (ts100: I added <rmam>/<smam> based on the init string -- esr)
+ts100|ts100-sp|falco ts100-sp,
+	am, mir, msgr, xenl, xon,
+	cols#80, it#8, lines#24, vt#3,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+	clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n,
+	cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+	cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+	cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
+	el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
+	ht=\t, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n,
+	is1=\E~)\E~ea, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=\b,
+	kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB,
+	kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP,
+	kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
+	kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
+	rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>,
+	rmso=\E[m$<2>, rmul=\E[m$<2>,
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;,
+	sgr0=\E[m^O$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
+	smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+ts100-ctxt|falco ts-100 saving context,
+	smcup=\E~_d\E[2J, rmcup=\E~_b, 
+	use=ts100,
+
+#### Florida Computer Graphics
+#
+
+# Florida Computer Graphics Beacon System, using terminal emulator program
+# "host.com", as provided by FCG.  This description is for an early release
+# of the "host" program.  Known bug: <ed> clears the whole screen, so it's
+# commented out.
+
+# From: David Bryant <cbosg!djb> 1/7/83
+beacon|FCG Beacon System,
+	cr=^M, cud1=^J, ind=^J, cols#80, lines#32, clear=\EZ$<10>,
+	cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuf1=\EV, cuu1=\EU, el=\ET,
+	.ed=\EY, dch1=\EW, ich1=\EQ, dl1=\ER, il1=\EE,
+	rmcup=, smcup=\ESTART^M\E2\0540^M\E12^M\EEND^M$<10>,
+	bel=\ESTART^M\E37^M\EEND^M$<1>, home=\EH$<10>,
+	am, da, db, 
+	rev=\ESTART^M\E59\0541^M\EEND^M,
+	smso=\ESTART^M\E70\0546^M\EEND^M$<20>,
+	rmso=\ESTART^M\E70\0540^M\EEND^M$<20>,
+	smul=\ESTART^M\E60\0541^M\EEND^M, 
+	rmul=\ESTART^M\E60\0540^M\EEND^M, 
+	blink=\ESTART^M\E61\0541^M\EEND^M, 
+	sgr0=\ESTART^M\E78^M\E70\0540^M\EEND^M$<20>,
+
+#### Fluke
+#
+
+# The f1720a differences from ANSI: no auto margin, destructive 
+# tabs, # of lines, funny highlighting and underlining
+f1720|f1720a|fluke 1720A, 
+	xt, 
+	cols#80, lines#16, xmc#1, 
+	bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, 
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 
+	ed=\E[J, el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, 
+	kcud1=^], kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, 
+	rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 
+
+#### Liberty Electronics (Freedom)
+#
+#	Liberty Electronics
+#	48089 Fremont Blvd
+#	Fremont CA 94538
+#	Vox: (510)-623-6000
+#	Fax: (510)-623-7021
+
+# From: <faletti@berkeley.edu>
+# (f100: added empty <acsc> to suppress a tic warning;
+# made this relative to adm+sgr -- note that <invis> isn't
+# known to work for f100 but does on the f110. --esr)
+f100|freedom|freedom100|freedom model 100,
+	am, bw, mir, msgr, xon, cols#80, lines#24, OTbs,
+	acsc=, cr=^M, ind=^J, bel=^G, clear=^Z, home=^^,
+	cud1=^J, cuf1=^L, cuu1=^K, cub1=^H,
+	tbc=\E3, hts=\E1, ht=^I, is2=\Eg\Ef\r\Ed,
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+	hpa=\E]%p1%{32}%+%c, vpa=\E[%p1%{32}%+%c,
+	ri=\Ej, ip=$<6>,
+	il1=\EE$<8.5*>, cbt=\EI, ed=\EY, el=\ET, dch1=\EW,
+	dl1=\ER$<11.5*>, rmir=\Er, smir=\Eq,
+	rmacs=\E$, smacs=\E%, flash=\Eb$<200>\Ed,
+	kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuu1=^K, kcuf1=^L, khome=^^,
+	kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+	kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, kf10=^AI\r,
+	hs, tsl=\Eg\Ef, fsl=\r, dsl=\Eg\Ef\r,
+	use=adm+sgr,
+f100-rv|freedom-rv|freedom 100 in reverse video,
+	is2=\Eg\Ef\r\Eb, flash=\Ed$<200>\Eb, use=f100,
+# The f110 and f200 have problems with vi(1).  They use the ^V
+# code for the down cursor key. When kcud1 is defined in terminfo
+# as ^V, the Control Character Quoting capability (^V in insert mode)
+# is lost! It cannot be remapped in vi because it is necessary to enter
+# a ^V to to quote the ^V that is being remapped!!!
+# 
+# f110/f200 users will have to decide whether
+# to lose the down cursor key or the quoting capability. We will opt
+# initially for leaving the quoting capability out, since use of VI
+# is not generally applicable to most interactive applications
+# (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
+f110|freedom110|Liberty Freedom 110, 
+	bw@, eslok, 
+	it#8, wsl#80, 
+	blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, 
+	cud1=^V, cvvis=\E.2, dim=\EG@, dl1=\ER, dsl=\Ef\r, 
+	flash=\Eb$<200/>\Ed, il1=\EE, 
+	ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, 
+	kel=\ET, kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, 
+	mc4=\Ea, mc5=\E`, ri=\EJ, rmacs=\E%%, 
+	rmir=\Er\EO, smacs=\E$, smir=\EO\Eq, 
+	smso=\EG<, tsl=\Ef, use=f100,
+f110-14|Liberty Freedom 110 14inch,
+	dch1@,use=f110,
+f110-w|Liberty Freedom 110 - 132 cols,
+	cols#132, use=f110,
+f110-14w|Liberty Freedom 110 14in/132 cols,
+	cols#132, dch1@, use=f110,
+# (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
+f200|freedom200|Liberty Freedom 200,
+	am, bel=^G, cols#80, lines#24, cr=^M, hs, mir, msgr, OTbs,
+	eslok, xon, it#8, wsl#80, acsc=, cbt=\EI,
+	csr=\em0%p1%{32}%+%c%p2%{32}%+%c, tbc=\e3, clear=^Z,
+	el=\ET, ed=\EY, hpa=\E]%p1%{32}%+%c, vpa=\E[%p1%{32}%+%c,
+	cup=\e=%p1%{32}%+%c%p2%{32}%+%c, cud1=^V, home=^^, civis=\e.0,
+	cub1=\b, cnorm=\e.1, cuf1=^L, cuu1=^K, cvvis=\e.1, dch1=\eW,
+	dl1=\eR, dsl=\ef\r, smacs=\e$, rmacs=\e%%, blink=\eG2,
+	bold=\eG0, dim=\EG@, smir=\eq, rmir=\er, smso=\eG<, 
+	flash=\Eo$<200/>\en, fsl=\r,
+	il1=\eE, kbs=\b, kclr=^^, kdch1=\eW, kdl1=\eR, kcud1=^V,
+	kel=\eT, ked=\eY, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
+	kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
+	kf0=^AI\r, kich1=\eQ, kil1=\eE, kcub1=\b, kcuf1=^L, kcuu1=^K,
+	mc4=\ea, mc5=\e`, hts=\e1, tsl=\ef, ind=\n, ri=\eJ,
+	use=adm+sgr,
+f200-w|Liberty Freedom 200 - 132 cols,
+	cols#132, use=f200,
+# The f200 has the ability to reprogram the down cursor key. The key is
+# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
+# so powering the terminal off and on will not cause the change to be lost.
+f200vi|Liberty Freedom 200 for vi, 
+	flash=\Eb$<200/>\Ed, kcud1=^J, 
+	use=f200,
+f200vi-w|Liberty Freedom 200 - 132 cols for vi,
+	cols#132, use=f200vi,
+
+#### GraphOn (go)
+#
+#	Graphon Corporation
+#	544 Division Street
+#	Campbell, CA 95008
+#	Vox: (408)-370-4080
+#	Fax: (408)-370-5047
+#	Net: troy@graphon.com (Troy Morrison)
+#
+#% GraphOn: troy@graphon.com (Troy Morrison)
+#
+# The go140 and go225 have been discontinued.  GraphOn now makes X terminals,
+# including one odd hybrid that starts out life on power-up as a character
+# terminal, than can be switched to X graphics mode (driven over the serial
+# line) by an escape sequence.  No info on this beast yet.
+# (go140: I added <rmam>/<smam> based on the init string -- esr)
+go140|graphon go-140,
+	cols#80, it#8, lines#24, OTbs,
+	clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C, 
+	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, 
+	dl1=\E[M, ed=\E[J$<10/>, el=\E[K, ht=\t, 
+	if=/usr/share/tabset/vt100, il1=\E[L, 
+	is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q, 
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, 
+	ri=\EM, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 
+	rmul=\E[m, sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, 
+	smam=\E[?7h, smul=\E[4m, 
+go140w|graphon go-140 in 132 column mode, 
+	am,
+	cols#132, 
+	is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q, use=go140,
+# Hacked up vt200 termcap to handle GO-225/VT220
+# From: <edm@nwnexus.WA.COM>
+# (go225: I added <rmam>/<smam> based on the init string -- esr)
+go225|go-225|Graphon 225, 
+	am, mir, xenl, OTbs,
+ 	cols#80, it#8, lines#25, vt#3, bold=\E[1m, clear=\E[H\E[J,
+	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J,
+	el=\E[K, home=\E[H, ht=\t, il1=\E[L, ind=\ED,
+	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H, kcub1=\E[D,
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
+	kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
+	rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l, 
+	rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
+	rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w, blink=\E[5m, sc=\E7,
+	sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r, smir=\E[4h, 
+	smkx=\E=, smso=\E[7m, smul=\E[4m,
+
+#### Harris (Beehive)
+#
+# Bletch.  These guys shared the Terminal Brain Damage laurels with Hazeltine.
+# Their terminal group is ancient history now (1995) though the parent
+# company is still in business.
+#
+
+# Beehive documentation is undated and marked Preliminary and has no figures
+# so we must have early Superbee2 (Model 600, according to phone conversation
+# with mfr.). It has proved reliable except for some missing padding
+# (notably after \EK and <nl> at bottom of screen).
+# 
+# The key idea is that AEP mode is poison for <cup> & that US's in 
+# the local memory should be avoided like the plague. That means 
+# that the 2048 character local buffer is used as 25 lines of 80 
+# characters, period. No scrolling local memory, folks. It also 
+# appears that we cannot use naked INS LINE feature since it uses
+# US. The sbi fakes <il1> with an 80-space insert that may be too 
+# slow at low speeds; also spaces get converted to \040 which is 
+# too long for some programs (not vi).  DEL LINE is ok but slow.
+# 
+# The <nl> string is designed for last line of screen ONLY; cup to 
+# 25th line corrects the motion inherent in scrolling to Page 1.
+# 
+# There is one understood bug. It is that the screen appears to
+# pop to a new (blank) page after a <nel>, or leave a half-line 
+# ellipsis to a quad that is the extra 48 memory locations. The 
+# data received is dumped into memory but not displayed.  Not to 
+# worry if <cup> is being used; the lines not displayed will be, 
+# whenever the cursor is moved up there. Since <cup> is addressed 
+# relative to MEMORY of window, nothing is lost; but beware of 
+# relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
+# therefore, is setenv MORE -c .
+# 
+# WARNING: Not all features tested.
+# 
+# Timings are assembled from 3 sources. Some timings may reflect 
+# SB2/Model 300 that were used if more conservative.
+# Tested on a Model 600 at 1200 and 9600 bd.
+# 
+# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly 
+# placed on the keyboard and useless because of AEP, is made 
+# into a backspace key. In use ESC must be pressed twice (to send)
+# and sending ^C must be prefixed by ESC to avoid that weird 
+# transmit mode associated with ENTER key.
+# 
+# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across 
+# the screen, then it has dropped into ENTER mode; hit 
+# RESET--ONLINE--!tset.
+# 
+# As delivered this machine has a FATAL feature that will throw 
+# it into that strange transmit state (SPOW) if the space bar is 
+# hit after a CR is received, but before receiving a LF (or a 
+# few others).
+# 
+# The circuits MUST be modified to eliminate the SPOW latch. 
+# This is done by strapping on chip A46 of the I/O board; cut 
+# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that 
+# chip. This mod has been checked out on a Mod 600 of Superbee II.
+# With this modification absurdly high timings on cr are 
+# unnecessary.
+# 
+# NOTE WELL that the rear panel switch should be set to CR/LF, 
+# not AEP!
+#
+sb|sb1|beehive superbee,
+	am, bw, da, db, mir, ul, xsb, OTbs,
+	cols#80, lines#25, xmc#1, 
+	bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r, cub1=\b$<1>,
+	cub1=^H, cud1=\EB$<3>, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
+	cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
+	home=\EH$<1>, ht=\t, hts=\E1, 
+	il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
+	ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED, kcud1=\EB, 
+	kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK, kf0=\E2, kf1=\Ep,
+	kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\E1,
+	khome=\EH, kich1=\EQ\EO, krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=,
+	rmir=\ER, rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
+	smso=\E_1, smul=\E_0, tbc=\E3,
+sbi|superbee|beehive superbee at Indiana U.,
+	xsb, 
+	cr=^M$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA, 
+	use=sb1,
+# Alternate (older) description of Superbee - f1=escape, f2=^C.
+# Note: there are at least 3 kinds of superbees in the world.  The sb1
+# holds onto escapes and botches ^C's.  The sb2 is the best of the 3.
+# The sb3 puts garbage on the bottom of the screen when you scroll with
+# the switch in the back set to CRLF instead of AEP.  This description
+# is tested on the sb2 but should work on all with either switch setting.
+# The f1/f2 business is for the sb1 and the <xsb> can be taken out for
+# the other two if you want to try to hit that tiny escape key.
+# This description is tricky: being able to use cup depends on there being
+# 2048 bytes of memory and the hairy <nl> string.
+superbee-xsb|beehive super bee, 
+	am, da, db, xsb, 
+	cols#80, it#8, lines#25, 
+	clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, 
+	cud1=^J, cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>, 
+	dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>, home=\EH, 
+	ht=^I, hts=\E1, 
+	ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, 
+	is2=\EH\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 
+	kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, 
+	kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\EH, 
+	rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3, 
+# This loses on lines > 80 chars long, use at your own risk
+superbeeic|super bee with insert char, 
+	ich1=, rmir=\ER, smir=\EQ, 
+	use=superbee-xsb,
+sb2|sb3|fixed superbee, 
+	xsb@, 
+	use=superbee,
+
+# Reports are that most of these Beehive entries (except superbee) have not
+# been tested and do not work right.  <rmso> is a trouble spot.  Be warned.
+
+# (bee: <ich1> was empty, which is obviously bogus -- esr)
+beehive|bee|harris beehive, 
+	am, mir, OTbs,
+	cols#80, lines#24, 
+	cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 
+	cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 
+	dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, 
+	kcbt=\E>, kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 
+	kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL, 
+	krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@, smir=\EQ,
+	smso=\EdP, smul=\Ed`, 
+# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
+# good grief - does this entry make :sg:/:ug: when it doesn't have to?
+# look at those spaces in <rmso>/<smso>.  Seems strange to me...
+# (beehive: <if=/usr/share/tabset/beehive> removed, no such file.  If you
+# really care, cook up one using ^F -- esr)
+beehive3|bh3m|beehiveIIIm|harris beehive 3m, 
+	am, OTbs,
+	cols#80, it#8, lines#20, 
+	bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K, 
+	dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
+	il1=\023$<160>, ll=^E^K, ind=^J, rmso= ^_, smso=^] , 
+beehive4|bh4|beehive 4,
+	cr=^M, cud1=^J, ind=^J, bel=^G,
+	cols#80, lines#24, am, cub1=^H, ed=\EJ, el=\EK, clear=\EE,
+	home=\EH, cuu1=\EA, cuf1=\EC, cub1=\ED,
+microb|microbee|micro bee series, 
+	am, OTbs,
+	cols#80, it#8, lines#24, 
+	bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 
+	cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, ht=^I,
+	el=\EK, ht=\t, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 
+	kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, 
+	kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, ind=^J,
+	rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@, smso= \EdP, smul=\Ed`, 
+
+# 8675, 8686, and bee from Cyrus Rahman
+# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
+ha8675|harris 8675, 
+	is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F, 
+	kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, 
+	kf15=\Ei, kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, 
+	kf6=^T, kf7=^H, kf8=\177, kf9=\Ee, 
+	use=bee,
+# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
+# in :is: -- esr)
+ha8686|harris 8686, 
+	is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#, 
+	kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, 
+	kf12=\002\E{\003, kf13=\002\E|\003, 
+	kf14=\002\E}\003, kf15=\002\E~\003, 
+	kf16=\002\E\177\003, kf2=\002\Eq\003, 
+	kf3=\002\Er\003, kf4=\002\Es\003, kf5=\E3, kf6=\EI, 
+	kf7=\ER, kf8=\EJ, kf9=\E(, 
+	use=bee,
+
+#### Hazeltine
+#
+# Hazeltine appears to be out of the terminal business as of 1995.  These
+# guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
+# Harris. They have a hazeltine.com domain (but no web page there ) and can
+# be reached at:
+#
+#	Hazeltine
+#	450 East Pulaski Road
+#	Greenlawn, New York 11740
+#
+# As late as 1993, manuals for the terminal product line could still be
+# purchased from:
+#
+#	TRW Customer Service Division
+#	15 Law Drive
+#	P.O. Box 2076
+#	Fairfield, NJ 07007-2078
+#
+# They're now (1998) a subsidiary of General Electric, operating under the
+# marque "GEC-Marconi Hazeltine" and doing military avionics.  Web page
+# at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
+#
+
+# Since <cuf1> is blank, when you want to erase something you
+# are out of luck.  You will have to do ^L's a lot to
+# redraw the screen.  h1000 is untested.  It doesn't work in
+# vi - this terminal is too dumb for even vi.  (The code is
+# there but it isn't debugged for this case.)
+hz1000|hazeltine 1000, 
+	cols#80, lines#12, OTbs,
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1= , home=^K, ind=^J, 
+# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
+hz1420|hazeltine 1420, 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P, 
+	cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S, 
+	ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y, 
+	smso=\E^_, 
+# New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>.  Prevents
+# freakout with out-of-range args and tn3270.  No hz since it needs to
+# receive tildes.
+hz1500|hazeltine 1500, 
+	am, hz, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, 
+	cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%'`'%+%c%p1%'`'%+%c, 
+	cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, 
+	home=~^R, il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, 
+	kcuf1=^P, kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_, 
+# h1510 assumed to be in sane escape mode.  Else use h1500.
+# (h1510: early versions of this entry apparently had "<rmso=\E^_>, 
+# <smso=\E^Y>, but these caps were commented out in 8.3; also,
+# removed incorrect and overridden ":do=^J:" -- esr)
+hz1510|hazeltine 1510, 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P, 
+	cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X, 
+	el=\E^O, il1=\E^Z, ind=^J, 
+# Hazeltine 1520
+# The following switch settings are assumed for normal operation:
+#	FULL		CR		U/L_CASE	ESCAPE
+#	FORMAT_OFF	EOM_A_OFF	EOM_B_OFF	WRAPAROUND_ON
+# Other switches may be set for operator convenience or communication
+# requirements.
+hz1520|Hazeltine 1520, 
+	OTbs, am, bw, msgr, 
+	cols#80, lines#24, 
+	bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J, 
+	cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, 
+	ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H, 
+	kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, 
+	kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z, 
+	rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_, 
+# This version works with the escape switch off
+# (h1520: removed incorrect and overridden ":do=^J:" -- esr)
+hz1520-noesc|hazeltine 1520, 
+	am, hz, 
+	cols#80, lines#24, 
+	bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, 
+	cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, 
+	el=~^O, home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_, 
+# Note: the h1552 appears to be the first Hazeltine terminal which
+# is not braindamaged.  It has tildes and backprimes and everything!
+# Be sure the auto lf/cr switch is set to cr.
+hz1552|hazeltine 1552, 
+	cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, OTbs,
+	kf3=\ER, lf1=blue, lf2=red, lf3=green, 
+	use=vt52,
+hz1552-rv|hazeltine 1552 reverse video, 
+	cud1=^J, rmso=\ET, smso=\ES, 
+	use=hz1552,
+# Note: h2000 won't work well because of a clash between upper case and ~'s.
+hz2000|hazeltine 2000, 
+	OTbs, OTnc, am, 
+	cols#74, lines#27, 
+	bel=^G, clear=~^\$<6>, cub1=^H, cud1=^J, cup=~\021%p2%c%p1%c, 
+	dl1=~^S$<6>, home=~^R, il1=~^Z$<6>, ind=^J, pad=\177, 
+# Date: Fri Jul 23 10:27:53 1982.  Some unknown person wrote:
+# I tested this termcap entry for the Hazeltine Esprit with vi. It seems
+# to work ok. There is one problem though if one types a lot of garbage
+# characters very fast vi seems not able to keep up and hangs while trying
+# to insert. That's in insert mode while trying to insert in the middle of
+# a line. It might be because the Esprit doesn't have insert char and delete
+# char as a built in function. Vi has to delete to end of line and then 
+# redraw the rest of the line.
+esprit|Hazeltine Esprit I,
+	cr=^M, cud1=^J, ind=^J, bel=^G, il1=\E^Z, am, cub1=^H, OTbs,
+	cbt=\E^T, bw, ed=\E^W, el=\E^O, clear=\E\034, cup=\E^Q%p2%c%p1%c,
+	cols#80, dl1=\E^S, cud1=\E^K, home=\E^R, is2=\E\077,
+	kf0=^B\060\n, kf1=^B\061\n, kf2=^B\062\n, kf3=^B\063\n,
+	kf4=^B\064\n, kf5=^B\065\n, kf6=^B\066\n, kf7=^B\067\n,
+	kf8=^B\070\n, kf9=^B\071\n, kbs=^H, kcud1=\E^K, rmkx=\E\076,
+	khome=\E^R, kcub1=^H, kcuf1=^P, smkx=\E\074, kcuu1=\E^L, lf0=0,
+	lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
+	lines#24, cuf1=^P, rmso=\E^Y, smso=\E^_, cuu1=\E^L,
+esprit-am|hazeltine esprit auto-margin, 
+	am, 
+	use=esprit,
+# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
+# Vi it seems always wants to send a control J for "do" and it turned out
+# that the terminal would work somewhat if the auto LF/CR was turned off.
+# (hmod1: removed :dn=~^K: -- esr)
+hmod1|Hazeltine Modular 1, 
+	OTbs, am, hz, 
+	cols#80, lines#24, 
+	bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, 
+	cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, 
+	il1=~^Z, ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, 
+	kcuu1=~^L, khome=~^R, rc=~^Q, rmso=~^Y, sc=~^E, 
+	sgr0=~^Y, smso=~^_, 
+#
+# Hazeltine Executive 80 Model 30 (1554?)
+#	from  Will Martin <control@ALMSA-1.ARPA> via BRL
+# Like VT100, except for different "am" behavior.
+hazel|exec80|h80|he80|Hazeltine Executive 80, 
+	OTbs, OTpt, am, 
+	cols#80, it#8, lines#24, vt#3, 
+	OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 
+	clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
+	cub1=^H, cud1=^J, cuf1=\E[C$<2/>, 
+	cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 
+	ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, 
+	is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, 
+	kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 
+	kf4=\EOS, rc=\E8, rev=\E[7m$<2/>, 
+	rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmkx=\E[?1l\E>, 
+	rmso=\E[m$<2/>, rmul=\E[m$<2/>, 
+	rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
+	sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>, 
+	smul=\E[4m$<2/>, 
+
+#### Hewlett-Packard (hp)
+#
+#	Hewlett-Packard
+#	8000 Foothills Blvd 
+#	Roseville, CA 95747
+#	Vox: 1-(916)-785-4363	(Technical response line for VDTs)
+#	     1-(800)-633-3600	(General customer support)
+#
+#% Hewlett-Packard: rich_kassis@hp5200.desk.hp.com (Rich Kassis)
+#
+# As of March 1998, HP no longer has any terminals in production.
+# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being 
+# supported (they still have parts). So are the 2392a and 2394a.
+# See the WORKSTATION CONSOLES section for the 700s.
+#
+
+# Generic HP terminal - this should (hopefully) work on any HP terminal.
+hpgeneric|hp|hewlett-packard generic terminal,
+	OTbs, OTpt,
+	tbc=\E3, hts=\E1, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EL, am,
+	cub1=^H, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, clear=\EH\EJ,
+	cup=\E&a%p2%dc%p1%dY$<6>, cols#80, vpa=\E&a%p1%dY, lm#0, da, db,
+	dch1=\EP, dl1=\EM, rmir=\ER, smir=\EQ, kbs=^H, lines#24, mir,
+	cuf1=\EC, ht=^I, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smso=\E&dJ,
+	smul=\E&dD, rmul=\E&d@, cuu1=\EA, xhp, vt#6, kcbt=\Ei,
+
+hp110|hewlett-packard model 110 portable,
+	lines#16,use=hpgeneric,
+
+hp+pfk+cr|hp function keys with CR,
+	kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
+	kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
+
+hp+pfk-cr|hp function keys w/o CR,
+	kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
+	kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
+
+# The hp2621s use the same keys for the arrows and function keys, 
+# but not separate escape sequences. These definitions allow the 
+# user to use those keys as arrow keys rather than as function 
+# keys.
+hp+pfk+arrows|hp alternate arrow definitions,
+	khome=\Ep\r, kll=\Eq\r, kind=\Er\r, kri=\Es\r,
+	kcuu1=\Et\r, kcub1=\Eu\r, kcuf1=\Ev\r, kcud1=\Ew\r,
+	kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
+
+hp+arrows|hp arrow definitions,
+	kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC,
+	khome=\Eh, kll=\EF, kind=\ES, kri=\ET,
+
+# Generic stuff from the HP 262x series
+#
+hp262x|HP 262x terminals,
+	dch1=\EP$<2>, ip=$<2>, rmso=\E&d@, smso=\E&dB, ed=\ED\EJ$<500>\EC,
+	rev=\E&dB, smul=\E&dD, blink=\E&dA, invis=\E&dS, sgr0=\E&d@, rmul=\E&d@,
+	sgr=\E&d%'@'%?%p1%t%'B'%|%;%?%p2%t%'D'%|%;%?%p3%t%'B'%|%;%?%p4%t%'A'%|%;%c,
+	khome=\Eh, kcuu1=\EA, kcub1=\ED, kcuf1=\EC, kcud1=\EB,
+	smkx=\E&s1A, rmkx=\E&s0A, knp=\EU, kpp=\EV, kri=\ET,
+	kind=\ES, kil1=\EL, kdl1=\EM, kich1=\EQ, kdch1=\EP,
+	kel=\EK, ked=\EJ, krmir=\ER,
+	ind=\ES, ht=^I$<2>, xhp,
+	ed=\EJ,
+
+# Note: no <home> on HPs since that homes to top of memory, not screen.
+# Due to severe 2621 braindamage, the only way to get the arrow keys to
+# transmit anything at all is to turn on the function key labels
+# with <smkx>, and even then the user has to hold down shift!
+# The default 2621 turns off the labels except when it has to to 
+# enable the function keys. If your installation prefers labels 
+# on all the time, or off all the time (at the "expense" of the 
+# function keys), use 2621-nl or 2621-wl.
+# 
+# Note: there are newer ROMs for 2621's that allow you to set 
+# strap A so the regular arrow keys xmit \EA, etc, as with the 
+# 2645. However, even with this strap set, the terminal stops 
+# xmitting if you reset it, until you unset and reset the strap!
+# Since there is no way to set/unset the strap with an escape 
+# sequence, we don't use it in the default.
+# If you like, you can use 2621-ba (brain-damaged arrow keys).
+hp2621-ba|2621 w/new rom and strap A set,
+	smkx@, rmkx@,
+	use=hp+arrows,
+	use=hp2621,
+
+# hp2621 with function labels. Most of the time they are off,
+# but inside vi, the function key labels appear. You have to
+# hold down shift to get them to xmit.
+hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
+	is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
+hp2621-fl|hp 2621,
+	is2=\E&j@\r, cbt=\Ei, cup=\E&a%p2%dc%p1%dY,
+	dch1=\EP$<2>, ip=$<2>, pb#19200,
+	smso=\E&dD, rmso=\E&d@, smul=\E&dD, rmul=\E&d@, sgr0=\E&d@, xhp@,
+	use=hp+pfk+cr, smkx=\E&jB, rmkx=\E&j@, ht=^I$<2>, xon, use=hpgeneric,
+
+# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
+hp2621p|hp 2621 with printer,
+	mc5=\E&p11C, mc4=\E&p13C, use=hp2621,
+
+hp2621p-a|hp2621p with fn as arrows,
+	use=hp+pfk+arrows, use=hp2621p,
+
+# hp2621 with k45 keyboard
+hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
+	kbs=^H, kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\Eh,
+	smkx=\E&s1A, rmkx=\E&s0A, use=hp2621,
+
+# 2621 using all 48 lines of memory, only 24 visible at any time.  
+hp2621-48|48 line 2621,
+	vpa=\E&a%p1%dR, lines#48, home=\EH, cup=\E&a%p2%dc%p1%dR, use=hp2621,
+
+# 2621 with no labels ever. Also prevents vi delays on escape.
+hp2621-nl|hp 2621 with no labels,
+	smkx@, rmkx@, khome@, kcuu1@, kcub1@, kcuf1@, kcud1@, use=hp2621-fl,
+
+# Needed for UCB ARPAVAX console, since lsi-11 expands tabs 
+# (wrong).
+#
+hp2621-nt|hp 2621 w/no tabs,
+	ht@, use=hp2621,
+
+# Hp 2624 B with 4 or 10 pages of memory.
+# 
+# Some assumptions are made with this entry. These settings are 
+# NOT set up by the initialization strings.
+# 
+# Port Configuration
+# 	RecvPace=Xon/Xoff
+# 	XmitPace=Xon/Xoff
+# 	StripNulDel=Yes
+# 
+# Terminal Configuration
+# 	InhHndShk=Yes
+# 	InhDC2=Yes
+# 	XmitFnctn(A)=No
+# 	InhEolWrp=No
+# 
+# Note: the 2624 DOES have a true <home>, believe it or not!
+# 
+# The 2624 has an "error line" to which messages can be sent. 
+# This is CLOSE to what is expected for a "status line". However,
+# after a message is sent to the "error line", the next carriage 
+# return is EATEN and the "error line" is turned back off again! 
+# So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
+# 
+# This entry supports emacs (and any other program that uses raw 
+# mode) at 4800 baud and less. I couldn't get the padding right 
+# for 9600.
+#
+# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
+hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
+	da, db, lm#96,
+	flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
+	use=hp+labels,
+	use=scrhp,
+
+# This hp2626 entry does not use any of the fancy windowing stuff 
+# of the 2626.
+# 
+# Indeed, terminfo does not yet handle such stuff. Since changing 
+# any window clears memory, it is probably not possible to use 
+# this for screen opt.
+# 
+# ed is incredibly slow most of the time - I am guessing at the 
+# exact padding. Since the terminal uses xoff/xon this is intended 
+# only for cost computation, so that the terminal will prefer el 
+# or even dl1 which is probably faster!
+# 
+# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only 
+# extra slow on the last line of the window. 
+# 
+# The padding probably should be changed.
+#
+hp2626|hp2626a|hp2626p|hp 2626,
+	ed=\ED\EJ$<500>\EC,
+	ip=$<4>,
+	is2=\E&j@\r,
+	pb#19200,
+	da, db, lm#0,
+	indn=\E&r%p1%dD,
+	rin=\E&r%p1%dU,
+	use=hp+pfk+cr,
+	use=hp+labels,
+	use=scrhp,
+
+# This entry is for sysline. It allocates a 23 line window with 
+# a 115 line workspace for regular use, and a 1 line window for 
+# the status line.
+# 
+# This assumes port 2 is being used.
+# Turn off horizontal line, Create ws #1 with 115 lines,
+# Create ws #2 with 1 line, Create window #1 lines 1-23,
+# Create window #2 lines 24-24, Attach cursor to workspace #1.
+# Note that this clears the tabs so it must be done by tset before
+# it sets the tabs.
+#
+hp2626-s|hp 2626 using only 23 lines,
+	tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC,
+	fsl=\E&d@\E&w7f2p1I\E&w4f1I, eslok, hs,
+	is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
+	lines#23, use=hp2626,
+# Force terminal back to 24 lines after being 23.
+hp2626-ns|hp 2626 using all 24 lines,
+	is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
+	use=hp2626,
+# Various entries useful for small windows on 2626.
+hp2626-12|hewlett-packard 2626 12 lines,
+	lines#12, use=hp2626,
+hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
+	cols#40, lines#12, use=hp2626,
+hp2626-x40|hewlett-packard 2626 40 columns,
+	cols#40, use=hp2626,
+hp2626-12-s|hewlett-packard 2626 11 lines plus status,
+	lines#11, use=hp2626-s,
+
+#
+# hp2627 color tubes from University of Wisconsin
+#
+hp2627a-rev|hp 2627 with reverse video colors, 
+	cr=^M, cud1=^J, ht=^I, ind=^J, 
+	is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r, 
+	kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 
+	rmul=\E&v0S\E&d@, smul=\E&dD\E&v1S, use=hp2621-nl,
+hp2627a|hp 2627 color terminal with no labels, 
+	cr=^M, cud1=^J, ht=^I, ind=^J, 
+	is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r, 
+	kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S, 
+	rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S, use=hp2621-nl,
+hp2627c|hp 2627 color (cyan) terminal with no labels, 
+	cr=^M, cud1=^J, ht=^I, ind=^J, 
+	is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r, 
+	kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
+
+# hp2640a doesn't have the Y cursor addressing feature, and C is 
+# memory relative instead of screen relative, as we need.
+#
+hp2640a|hp 2640a,
+	cup@, smkx@, rmkx@, use=hp2645,
+
+hp2640b|hp2644a|hp 264x series,
+	smkx@, rmkx@, use=hp2645,
+
+# (hp2641a: removed unknown :gu: -- esr)
+hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry, 
+	am, da, db, mir, xhp, 
+	cols#80, lines#24, 
+	bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 
+	cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, 
+	ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I, 
+	if=/usr/share/tabset/std, il1=\EL, ind=^J, is2=\EE$<500/>, 
+	kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmso=\E&d@, 
+	smir=\EQ, smso=\E&dB, vpa=\E&a%p1%2dY, 
+
+# This terminal should be used at 4800 baud or less. It needs padding for
+# plain characters at 9600, I guessed at an appropriate cr delay.  It really
+# wants ^E/^F handshaking, but that doesn't work well even if you write
+# software to support it.
+hp2645|hp45|HP 2645 series,
+	dim=\E&dH, rev=\E&dB, smul=\E&dD, blink=\E&dA, sgr0=\E&d@,
+	sgr=\E&d%'@'%?%p1%t%'B'%|%;%?%p2%t%'D'%|%;%?%p3%t%'B'%|%;%?%p4%t%'A'%|%;%?%p5%t%'H'%|%;%?%p6%t%'B'%|%;%c,
+	kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\Eh,
+	kctab=\E2, khts=\E1,
+	smkx=\E&s1A, rmkx=\E&s0A, knp=\EU, kpp=\EV, kri=\ET, kind=\ES,
+	kil1=\EL, kdl1=\EM, kich1=\EQ, kdch1=\EP,
+	kel=\EK, ked=\EJ, krmir=\ER, pb#9600, cr=^M$<20>, use=hpgeneric,
+# You should use this terminal at 4800 baud or less.
+hp2648|hp2648a|HP 2648a graphics terminal,
+	clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
+	dch1=\EP$<7>, ip=$<5>, use=hp2645,
+
+# The HP 150 terminal is a fairly vanilla HP terminal, with the 
+# clreol standout problem. It also has graphics capabilities and 
+# a touch screen, which we don't describe here.
+hp150|hewlett packard Model 150,
+	OTbs, use=hp2622,
+
+# HP 2382a terminals, "the little ones." They don't have any 
+# alternate character set support and sending out ^N/^O will 
+# leave the screen blank.
+hp2382a|hp2382|hewlett packard 2382a,
+	da, db, lm#48,
+	pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
+	lh#1, use=hp+labels,
+	rmacs@, smacs@, acsc@,
+	sgr0=\E&d@,
+	sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%'@'%+%e%'S'%;%e%?%ga%t%ga%'@'%+%e%'@'%;%;%c,
+	use=scrhp,
+
+hp2621-a|hp2621a-a|hp2621 with fn as arrows,
+	use=hp+pfk+arrows, use=hp2621-fl,
+
+# newer hewlett packard terminals
+
+newhpkeyboard|generic entry for HP extended keyboard,
+	kbs=^H, kcbt=\Ei, kclr=\EJ,
+	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+	kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK,
+	use=hp+pfk-cr,
+	khome=\Eh, kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF,
+	knp=\EU, kpp=\EV, kri=\ES, krmir=\ER,
+	rmkx=\E&s0A, smkx=\E&s1A,
+
+newhp|generic entry for new hewlett packard terminals,
+	am, bw, mir, xhp, xon,
+	cols#80, lines#24, pb#4800,
+	acsc=T1R!U2S"W3O#V4P$t5u6w7v8:'9(LQKWlRkT5I3@2[MAJSmFjGdHQ;Y+Z*X:4>q\,x.n/,
+	bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M,
+	cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
+# cub1=\ED, cud1=\EB,
+	dch1=\EP$<2>, dim=\E&dH, dl1=\EM,
+	ed=\EJ, el=\EK, ht=^I$<2>,
+	hts=\E1, il1=\EL, ind=^J, invis=\E&dS, ip=$<2>, is1=\E&jB$<8>,
+# ind=\ES,
+	nel=^M^J,
+	pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
+	pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
+	pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s,
+	rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
+	rs1=\Eg,
+	sgr0=\E&d@^O,
+# <sgr> is figured out as follows:
+#     tparm parameters
+# 	1=standout, 2=underlining, 3=reverse video, 4=blinking, 5=dim,
+# 	6=bold, 7=blank, 8=protection, 9=alternate character set
+# 	The protection parameter is ignored.
+#     combination parameters
+# 	standout = reverse + half-intensity = 3 | 5.
+# 	bold = reverse + underline = 2 | 3.
+#
+	sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%'@'%+%e%'S'%;%e%?%ga%t%ga%'@'%+%e%'@'%;%;%c%?%p9%t^N%e^O%;,
+	smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
+	tbc=\E3,
+	use=newhpkeyboard,
+
+memhp|memory relative addressing for new HP ttys,
+	vt#6,
+	clear=\EH\EJ$<40>,
+	cub=\E&a-%p1%dC, cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC, cuu=\E&a-%p1%dR,
+	cup=\E&a%p1%dr%p2%dC, mrcup=\E&a%p1%dr%p2%dC,
+	home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R^M, vpa=\E&a%p1%dR,
+	use=newhp,
+
+scrhp|screen relative addressing for new HP ttys,
+	clear=\E&a0c0Y\EJ$<40>,
+	cub=\E&a-%p1%dC, cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC, cuu=\E&a-%p1%dR,
+	cup=\E&a%p1%dy%p2%dC$<10>, mrcup=\E&a%p1%dr%p2%dC,
+	home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA, vpa=\E&a%p1%dY,
+	use=newhp,
+
+# (hp+labels: added label values from a BRL termcap -- esr)
+hp+labels|"standard" label info for new HP ttys,
+	lh#2, lw#8, nlab#8,
+	pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
+	lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, 
+	rmln=\E&j@, smln=\E&jB,
+
+hp+printer|"standard" printer info for HP ttys,
+	ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
+
+
+# The new hp2621b is kind of a cross between the old 2621 and the
+# new 262x series of machines. It has dip-switched options. 
+# The firmware has a bug in it such that if you give it a null 
+# length label, the following character is eaten!
+hp2621b|hp 2621b with old style keyboard,
+	lm#48, lh#1, lw#8, nlab#8,
+	pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%'o'%p1%+%c\r,
+	smln=\E&jB,
+	khome=\Eh, kll=\EF, kri=\ES, kind=\ET,
+	kcuu1=\EA, kcub1=\ED, kcuf1=\EC, kcud1=\EB,
+	use=hp2621,
+
+hp2621b-p|hp 2621b with printer,
+	use=hp+printer,
+	use=hp2621b,
+
+# hp2621b - new 2621b with new extended keyboard
+# these are closer to the new 26xx series than the other 2621b
+hp2621b-kx|hp 2621b with extended keyboard,
+	use=newhpkeyboard,
+	use=hp2621b,
+
+hp2621b-kx-p|hp 2621b with new keyboard & printer,
+	use=hp+printer,
+	use=hp2621b-kx,
+
+# Some assumptions are made in the following entries.
+# These settings are NOT set up by the initialization strings.
+# 
+#    Port Configuration
+# RecvPace=Xon/Xoff	XmitPace=Xon/Xoff	StripNulDel=Yes
+# 
+#    Terminal Configuration
+# InhHndShk(G)=Yes	InhDC2(H)=Yes
+# XmitFnctn(A)=No		InhEolWrp=No
+#
+# 
+# Hp 2622a & hp2623a display and graphics terminals
+#
+hp2622|hp2622a|hp 2622,
+	use=hp+pfk+cr,
+	is2=\E&dj@\r,
+	pb#19200,
+	da, db, lm#0,
+	use=hp+labels,
+	use=scrhp,
+
+# The 2623 is a 2622 with extra graphics hardware.
+hp2623|hp2623a|hp 2623,
+	use=hp2622,
+
+hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
+	use=hp+printer,
+	use=hp2624,
+
+# The hewlett packard B can have an optional extra 6 pages of memory.
+hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
+	lm#240, use=hp2624,
+
+hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
+	lm#240, use=hp2624b-p,
+
+# Color manipulations for HP terminals
+hp+color|hp with colors,
+	ccc,
+	pairs#7, colors#16, ncv#17,
+	scp=\E&v%p1%dS,
+	initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a
+		  %?%p3%{1000}%=%t1%e.%p3%d%;b
+		  %?%p4%{1000}%=%t1%e.%p4%d%;c
+		  %?%p5%{1000}%=%t1%e.%p5%d%;x
+		  %?%p6%{1000}%=%t1%e.%p6%d%;y
+		  %?%p7%{1000}%=%t1%e.%p7%d%;z
+		  %p1%dI,
+	oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
+	op=\E&v0S,
+
+# <is2> sets the screen to be 80 columns wide
+hp2397a|hp2397|hewlett packard 2397A color terminal,
+	is2=\E&w6f80X,
+	use=memhp, use=hp+labels, use=hp+color,
+
+#
+# (hp2392: copied <rmir> here from hpex -- esr)
+hp2392|239x series,
+	cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
+	kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
+	kf8=\Ew\r, kri=\EV, kind=\EU, rmir=\ER, rmul=\E&d@, smir=\EQ,
+	smul=\E&dD, vpa=\E&a%p1%dY, cols#80,
+	khome=\Eh, knp=\Eu, kpp=\Ev,
+	use=hpsub,
+
+hpsub|hp terminals -- capability subset,
+	am, da, db, mir, xhp, xon,
+	lines#24,
+	bel=^G, clear=\EH\EJ, cr=\r, cub1=\b, cud1=\EB,
+	cuf1=\EC, cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK,
+	hpa=\E&a%p1%dC, ht=\t, if=/usr/share/tabset/stdcrt,
+	il1=\EL, ind=\n, is2=\E&s1A\E<\E&k0\\, kbs=\b,
+	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
+	rmkx=\E&s0A, rmso=\E&d@, sgr0=\E&d@, smkx=\E&s1A,
+	smso=\E&dB,
+
+# hpex:
+#	May be used for most 24 x 80 hp terminals,
+# but has no padding added, so may allow runover in some terminals at high 
+# baud rates.  Will not work for hp2640a or hp2640b terminals, hp98x6 and 
+# hp98x5 terminal emulators or hp98x6 consoles.  
+# 	Adds xy-cursor addressing, vertical cursor addressing, home, 
+# last line, and underline capabilities.
+#
+# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
+# moved <rmir> here from hpsub -- esr)
+hpex|hp extended capabilites, 
+	cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, 
+	ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 
+	rmul=\E&d@, rmir=\ER, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
+
+# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
+hp2|hpex2|hewlett-packard extended capabilities newer version,
+	am, xhp, da, db, mir, 
+	cols#80, lines#24, lm#0, xmc#0, nlab#8, lh#2, lw#8, 
+	bel=^G, cr=\r, tbc=\E3, clear=\E&a0y0C\EJ, 
+	el=\EK, ed=\EJ, hpa=\E&a%p1%dC, cup=\E&a%p1%dy%p2%dC, 
+	cud1=\EB, cub1=\b, cuf1=\EC, cuu1=\EA, 
+	dch1=\EP, dl1=\EM, smir=\EQ, smso=\E&dB, 
+	smul=\E&dD, sgr0=\E&d@, rmir=\ER, rmso=\E&d@, 
+	rmul=\E&d@, il1=\EL, kbs=\b, ktbc=\E3, 
+	kclr=\EJ, kctab=\E2, kdch1=\EP, kdl1=\EM, 
+	kcud1=\EB, krmir=\ER, kel=\EK, ked=\EJ, 
+	kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, 
+	kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 
+	khome=\Eh, kich1=\EQ, kil1=\EL, kcub1=\ED, 
+	kll=\EF, knp=\EU, kpp=\EV, kcuf1=\EC, 
+	kind=\ES, kri=\ET, khts=\E1, kcuu1=\EA, 
+	rmkx=\E&s0A, smkx=\E&s1A, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
+	pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
+	vpa=\E&a%p1%dY, ind=\n, sgr=\E&d%?%p7%t%'s'%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%'@'%+%c%?%p9%t%'^N'%c%e%'^O'%c%;, 
+	hts=\E1, ht=\t, meml=\El, memu=\Em, 
+	pln=\E&f%p1%dk%p2%l%dd0L%p2%s, smln=\E&jB, rmln=\E&j@, 
+
+# HP 236 console
+# From: <ddavis@ic.berkeley.edu>
+hp236|hp236 internal terminal emulator, 
+	am, OTbs,
+	cols#80, lines#24, 
+	clear=\EF, cnorm=\EDE, 
+	cub1=^H, cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	cvvis=\EDB, dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, 
+	il1=\EG, rmso=\ECI, sgr0=\ECI, smso=\EBI, 
+
+# This works on a hp300 console running Utah 4.3 BSD
+# From: Craig Leres <leres@okeeffe.berkeley.edu>
+hp300h|HP Catseye console, 
+	OTbs, am, da, db, mir, xhp, 
+	cols#128, lines#51, lm#0, xmc#0, 
+	bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, 
+	cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, 
+	dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, 
+	ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, 
+	ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 
+	kcuu1=\EA, khome=\Eh, rmir=\ER, rmkx=\E&s0A, 
+	rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ, 
+	smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3, 
+	vpa=\E&a%p1%dY, 
+# From: Greg Couch <gregc@ernie.berkeley.edu>
+hp9837|hp98720|hp98721|HP 9000/300 workstations, 
+	am, da, db, mir, xhp, OTbs,
+	cols#128, it#8, lines#46, lm#0, 
+	bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, 
+	cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, 
+	dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, 
+	ht=\t, hts=\E1, il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, 
+	kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+	kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
+	kich1=\EQ, kil1=\EL, knp=\EU, kpp=\EV, rmir=\ER, rmkx=\E&s0A, 
+	rmso=\E&v0S, rmul=\E&d@, sgr0=\E&d@, smir=\EQ, 
+	smkx=\E&s1A, smso=\E&v5S, smul=\E&dD, tbc=\E3, 
+	vpa=\E&a%p1%dY, 
+# HP 9845 desktop computer from BRL
+# (hp9845: removed unknown capability :gu: -- esr)
+hp9845|HP 9845, 
+	OTbs, am, da, db, eo, mir, xhp, 
+	cols#80, lines#21, 
+	OTbc=\ED, clear=\EH\EJ, cuf1=\EC, 
+	cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, 
+	ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL, 
+	rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, 
+# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
+# (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
+# added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
+hp98550|hp98550a|HP 9000 Series 300 color console, 
+	am, da, db, mir, xhp, OTbs,
+	cols#128, it#8, lines#49, lm#0, 
+	acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, 
+	civis=\E*dR, clear=\EH\EJ, cnorm=\E*dQ, cr=^M, 
+	cub1=^H, cud1=^J, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, 
+	cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ, 
+	el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 
+	if=/usr/share/tabset/std, il1=\EL, ind=^J, 
+	invis=\E&ds, kbs=^H, kclr=\EJ, kctab=\E2, 
+	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 
+	kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, 
+	kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, 
+	kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, 
+	kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, 
+	kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ, rmacs=^O, 
+	rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, 
+	sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, 
+	smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 
+
+bobcat|sbobcat|HP 9000 model 300 console, 
+	am, da, db, mir, xhp, 
+	cols#128, it#8, lines#47, xmc#0, 
+	cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, 
+	cuf1=\EC, cup=\E&a%dy%dC$<6/>, cuu1=\EA, dch1=\EP, 
+	dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%dC$<6/>, 
+	ht=^I, il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, 
+	kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 
+	nel=^M^J, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, 
+	rmul=\E&d@, sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&dB, 
+	smul=\E&dD, vpa=\E&a%dY$<6/>, 
+gator-t|HP 9000 model 237 emulating extra-tall AAA, 
+	lines#94, use=gator, 
+gator|HP 9000 model 237 emulating AAA, 
+	bw, km, mir, ul, 
+	cols#128, it#8, lines#47, 
+	bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, 
+	cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, 
+	dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>, 
+	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 
+	hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, 
+	il=\E[%p1%dL$<1*/>, il1=\E[L, kbs=^H, kcub1=^H, 
+	kcud1=^J, nel=^M^J, rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, 
+	rmso=\E[m, rmul=\E[m, sgr0=\E[m,  
+	smso=\E[7m, smul=\E[4m, 
+gator-52|HP 9000 model 237 emulating VT52, 
+	cols#128, lines#47, 
+	use=vt52,
+gator-52t|HP 9000 model 237 emulating extra-tall VT52, 
+	lines#94, use=gator-52, 
+
+#### Honeywell-Bull
+#
+# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
+#
+
+# Honeywell Bull terminal.  Its cursor and function keys send single
+# control characters and it has standout/underline glitch.  Most programs
+# do not like these features/bugs.  Visual bell is realized by flashing the
+# "keyboard locked" LED.
+dku7003-dumb|Honeywell Bull DKU 7003 dumb mode, 
+	cols#80, lines#25, 
+	clear=\035\037, cr=\r, cub1=\031, cud1=\013, 
+	cuf1=\030, cup=\E[%i%p1%d;%p2%dH, cuu1=\032, 
+	ed=\037, el=\E[K, flash=\E[2h\E[2l, home=\035, 
+	ht=\011, ind=\012, kbs=\010, kcub1=\031, 
+	kcud1=\013, kcuf1=\030, kcuu1=\032, khome=\035, 
+	nel=\r\012, 
+dku7003|Honeywell Bull DKU 7003 all features described, 
+	msgr, 
+	xmc#1, 
+	blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, 
+	rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 
+	use=dku7003-dumb,
+
+#### IBM
+#
+
+ibm327x|line mode IBM 3270 style,
+ 	gn, clear=^M^J, el=^M, home=^M, 
+
+# Beware! The 3101 entry IBM shipped with AIX 3 is *wrong*.  Losers...
+# From: J.B. Nicholson-Owens <jeffo@uiuc.edu> 8 Mar 94
+# (ibm3101: <if=/usr/share/tabset/ibm3101> removed, no such file -- esr)
+ibm3101|i3101|IBM 3101-10, 
+	am, xon, OTbs,
+	cols#80, lines#24, 
+	bel=\007, clear=\EK, cr=\r, cub1=^H, cud1=^J, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 
+	el=\EI, home=\EH, ht=^I, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB, 
+	kbs=\010, kcuf1=\EC, kcuu1=\EA, nel=\015\012, tbc=\E1, 
+#   Received from the IBM terminals division (given to DRB)
+#   June 1988 for PS/2 OS 2.2.3 cut
+ibm3151|i3151|IBM 3151,
+	smso=\E4\101, rmso=\E4\100,
+	smul=\E4\102, rmul=\E4\100,
+	sgr=\E4%{64}%?%p1%{0}%>%p1%{4}%<%&%t%{8}%|%;%?%p1%{7}%=%t%{16}%|%;%?%p2%t%{1}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%c,
+	sgr0=\E4\100,
+	tc=ibm3163,
+# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992 
+# I've commented out or translated some IBM extensions.
+ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
+	OTbs,
+	am,             mir,            cr=^M,          ind=^J,
+	cols#80,        it#8,           lines#24,       kich1=\EP\040\010,
+	ed=\EJ,         el=\EI,         cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+	clear=\EH\EJ,   dch1=\EQ,       dl1=\EO,        cud1=\EB,
+	cub1=\ED,       blink=\E4D,     bold=\E4H,      sgr0=\E4@\E<@,
+	invis=\E4P,     rev=\E4A,       cuf1=\EC,       rmso=\E4@,
+	smso=\E4A,      rmul=\E4@,      cuu1=\EA,       smul=\E4B,
+	sgr=\E4%'@'%?%p1%t%'A'%|%;
+		   %?%p2%t%'B'%|%;
+		   %?%p3%t%'A'%|%;
+		   %?%p4%t%'D'%|%;
+		   %?%p5%t%'@'%|%;
+		   %?%p6%t%'H'%|%;
+		   %?%p7%t%'P'%|%;%c
+		   %?%p9%t\E>A%e\E<@%;,
+	acsc=l\354q\361k\353x\370j\352m\355w\367u\365v\366t\364n\356, 
+	.box1=\354\361\353\370\352\355\367\365\366\364\356,
+	.box2=\354\361\353\370\352\355\367\365\366\364\356, .batt2=md,
+	ktbc=\E\0401,   kil1=\EN,       kbs=^H,         kclr=\EL^M,
+	kcud1=\EB,      kdch1=\EQ,      kel=\EI,        khome=\EH,
+	kcub1=\ED,      kdl1=\EO,       .ktab=^I,       kcbt=\E2,
+	kcuf1=\EC,      ked=\EJ,        kctab=\E1,      khts=\E0,
+	kcuu1=\EA,      .knl=\r,        .kact=\E8\r,
+	kf1=\Ea\r,      kf2=\Eb\r,      kf3=\Ec\r,      kf4=\Ed\r,
+	kf5=\Ee\r,      kf6=\Ef\r,      kf7=\Eg\r,      kf8=\Eh\r,
+	kf9=\Ei\r,      kf10=\Ej\r,     kf11=\Ek\r,     kf12=\El\r,
+	kf13=\E!a\r,    kf14=\E!b\r,    kf15=\E!c\r,    kf16=\E!d\r,
+	kf17=\E!e\r,    kf18=\E!f\r,    kf19=\E!g\r,    kf20=\E!h\r,
+	kf21=\E!i\r,    kf22=\E!j\r,    kf23=\E!k\r,    kf24=\E!l\r,
+	smcup=\E>A,     rmcup=\E>A,     msgr,
+	home=\EH,       bel=^G,
+
+# How the 3164 sgr string works:
+#	%{32}	        # push space for no special video characteristics
+#	%?%p2%t%{1}%|%; # if p2 set, then OR the 1 bit for reverse
+#	%?%p3%t%{4}%|%; # if p3 set, then OR the 4 bit for blink
+#	%?%p4%t%{2}%|%; # if p4 set, then OR the 2 bit for underline
+#	%c              # pop Pa1
+#	%{39}%p1%-	# calculate 32 + (7 - p1) for foreground
+#	%c		# pop Pa2 
+#	%{64}		# use only black background for now
+#	%c		# pop Pa3
+ibm3164|i3164|IBM 3164,
+	blink=\E4D, bold=\E4H,
+	sgr=\E4%{32}%?%p2%t%{1}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%c%{39}%p1%-%c%{64}%c,
+	sgr0=\E4@,
+	use=ibm3163,
+
+ibmaed|IBM Experimental display, 
+	am, eo, msgr, OTbs,
+	cols#80, it#8, lines#52, 
+	clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 
+	dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, flash=\EG, 
+	home=\EH, ht=\t, ich1=\EP, il1=\EN, kbs=^H, kcub1=\ED, 
+	kcud1=\EB, kcuf1=\EC, kcuu1=\EA, rmso=\E0, 
+	sgr0=\E0, smso=\E0, 
+ibm-apl|apl|IBM apl terminal simulator, 
+	lines#25, 
+	use=dm1520,
+# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.  
+# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
+ibmmono|ibm5151|IBM workstation monochrome, 
+	eslok, hs, 
+	bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, 
+	il1=\EL, invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, 
+	kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, 
+	kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY, khome=\EH, 
+	kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG, 
+	lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew, 
+	sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, 
+	tsl=\Ej\EY8%+ \Eo, use=ibm3101,
+ibmega|ibm5154|IBM Enhanced Color Display, 
+	cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, 
+	kcud1=^J, nel=^M^J, use=ibmmono,
+ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline, 
+	rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;, use=ibmmono,
+ibmvga-c|IBM VGA display color termcap, 
+	cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, 
+	kcud1=^J, nel=^M^J, use=ibmega-c,
+ibmvga|IBM VGA display, 
+	cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, 
+	kcud1=^J, nel=^M^J, use=ibmega,
+# ibmapa* and ibmmono entries come from ACIS 4.3 distribution
+rtpc|ibmapa16|ibm6155|IBM 6155 Extended Monochrome Graphics Display, 
+	lines#32, 
+	dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
+# Advanced Monochrome (6153) and Color (6154) Graphics Display:
+ibmapa8c|ibmapa8|ibm6154|ibm6153|IBM 6153/4 Advanced Graphics Display, 
+	lines#31, 
+	dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
+ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display, 
+	lines#31, 
+	dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, 
+	tsl=\Ej\EY?%+ \Eo, use=ibmega-c,
+# From: Marc Pawliger <marc@ibminet.awdpa.ibm.com>
+# also in /usr/lpp/bos/bsdsysadmin.
+# (hft-c: this entry had :kb=\E[D:kf=\E[C: on the line with ku/kd/kh; this was
+# pretty obviously mislabeled for :le: and :nd:; also ":ul=\E[4m:" was clearly
+# a typo for ":us=\E[4m:"; also ":el=\E[K:" was a typo for ":ce=\E[K:".
+# I also added <rmam>/<smam> based on the terminal reset string.
+# There was an unknown boolean ":ht:" which I assume was meant to set hardware
+# tabs, so I have inserted it#8. Finally, :ac=^N: paired with the :ae: looked
+# like a typo for :as=^N:; finally, added empty <acsc> to quiet tic -- esr)
+ibm8512|ibm8513|hft-c|IBM High Function Terminal, 
+	am, mir, msgr, 
+	cols#80, it#8, lines#25, 
+	acsc=, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cub1=\E[D, cud1=^J,
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM,
+	dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
+	il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
+	kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
+	kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, kf9=\E[009q,
+	khome=\E[H, rc=\E[u, rev=\E[7m, rmacs=^O, rmam=\E[?7l, rmcup=\E[20h,
+	rmdc=\E[4l, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
+	rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m, smacs=^N,
+	smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb, smdc=\E[4h,
+	smir=\E[4h, smso=\E[7m, smul=\E[4m,
+hft|AIWS High Function Terminal, 
+	am, xon, 
+	cols#80, lines#25, 
+	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, 
+	cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 
+	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 
+	ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q, 
+	kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, 
+	kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q, 
+	ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, 
+	rmul=\E[m, sgr0=\E[m, smir=\E6, smso=\E[7m, 
+	smul=\E[4m, 
+ibm-system1|system1|ibm system/1 computer,
+	ind=^J, bel=^G, xt, am, cub1=^H,
+	cup=^E%p1%{32}%+%c%p2%{32}%+%c, clear=^Z,
+	cols#80, home=^K, lines#24, cuf1=^\, cuu1=^^, 
+
+# From: <pryor@math.berkeley.edu>
+ibm5081|ibmmpel|IBM 5081 1024x1024 256/4096 Megapel color display, 
+	eslok, hs, 
+	lines#33, 
+	dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo, use=ibmmono,
+ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display, 
+	eslok, hs, 
+	lines#33, 
+	dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo, use=ibmega-c,
+ibm8514|IBM 8514 color display, 
+	eslok, hs, 
+	lines#41, 
+	cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, 
+	ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 
+	tsl=\Ej\EYI%+ \Eo, use=ibmega,
+ibm8514-c|IBM 8514 color display with standout and underline, 
+	eslok, hs, 
+	lines#41, 
+	cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, 
+	ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 
+	tsl=\Ej\EYI%+ \Eo, use=ibmega-c,
+
+#
+# AIX entries.  IBM ships these with AIX 3. 
+# AIX extension caps are commented out,
+# except for box1 which has been translated to an <acsc> string.
+#
+aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
+	bold=\E[1m, .topl=\E[38m, .btml=\E[49m, .rvert=\E[48m, .lvert=\E[39m,
+	hs, eslok, tsl=\E[?%p1%dT, fsl=\E[?F, dsl=\E[?E, ri@,
+	acsc=llqqkkxxjjmmwwuuvvttnn, 
+	.box1=\154\161\153\170\152\155\167\165\166\164\156, .batt1=f1,
+	.box2=\154\161\153\170\152\155\167\165\166\164\156, .batt2=f1md,
+	s0ds=\E(B,     s1ds=\E(0,  sgr0=\E[0;10m\E(B, 
+	sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+	use=ibm6153,
+aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
+	bold=\E[1m,
+	hs, eslok, tsl=\E[?%p1%dT, fsl=\E[?F, dsl=\E[?E, ri@,
+	sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+	use=ibm6153,
+jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
+	acsc@, .box1@, .box2@,
+	use=aixterm-m,
+
+#### Infoton/General Terminal Corp.
+#
+
+# gt100 sounds like something DEC would come out with.  Let's hope they don't.
+i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100), 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 
+	cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM, 
+	ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL, ind=^J,
+	rmso=\Ea, smso=\Eb, 
+i400|infoton 400, 
+	am, OTbs,
+	cols#80, lines#25, 
+	bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 
+	cup=%i\E[%p1%3d;%p2%3dH, cuu1=\E[A, 
+	dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N, 
+	il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q, 
+# (addrinfo: removed obsolete ":bc=^Z:" -- esr)
+addrinfo, 
+	am, 
+	cols#80, lines#24, 
+	bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, 
+	cup=\037%p1%{1}%-%c%p2%{1}%-%c, cuu1=^\, ed=^K, 
+	home=^H, ll=^H^\, ind=^J, 
+# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
+infoton,
+	am,
+	cols#80, lines#24,
+	bel=^G, clear=\f, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y,
+	cuu1=^\, ed=^K, ind=\n, ll=\b^\,
+
+# The ICL6402 was actually the Kokusai Display System 6402.
+# The 6404 was the KDS7372 (color version of the 6402).
+# 
+# ICL6404 control codes follow:
+#
+#code            function
+#~~~~~~~~~~~     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#ctrl-A          set SOM position at cursor position
+#ctrl-G          Bell
+#ctrl-H          Backspace
+#ctrl-I          Horiz tab
+#ctrl-J          Linefeed
+#ctrl-K          Cursor up
+#ctrl-L          Cursor right
+#ctrl-M          Carriage return
+#ctrl-N          Disable xon/xoff to host
+#ctrl-O          Enable xon/xoff to host
+#ctrl-R          Enable bidirectional mode
+#ctrl-T          Disable bidirectional mode
+#ctrl-V          Cursor down
+#ctrl-Z          Clear unprotected data to insert char
+#ctrl-^          Cursor home
+#ctrl-_          Newline
+#
+#ESC             lead-in char for multiple character command
+#
+#ESC space R     execute power on sequence
+#ESC ! p1 p2     define scroll region:
+#                p1 = scroll top    line:  20h - 37h
+#                p1 = scroll bottom line:  20h - 37h
+#ESC "           unlock keyboard
+#ESC #           lock keyboard
+#ESC $           Semi-graphics mode on
+#ESC %           Semi-graphics mode off
+#ESC &           protect mode on
+#ESC '           protect mode off
+#ESC (           write protect mode off (full intensity)
+#ESC )           write protect mode on (half intensity)
+#
+#ESC *           clear screen
+#ESC +           clear unprotected data to insert char
+#ESC ,           clear unprotected data to half intensity spaces
+#ESC - p1 p2 p3 p4     address cursor to page, row, column:
+#                      p1 = page number  0 - 3
+#                      p2 = row          20h - 7fh
+#                      p3 = column (lo)  20h - 7fh
+#                      p4 = column (hi)  20h - 21h (only 132 col)
+#ESC . p1        set cursor style:
+#                p1 = 0  invisible cursor
+#                p1 = 1  block blinking cursor
+#                p1 = 2  block steady cursor
+#                p1 = 3  underline blinking cursor
+#                p1 = 4  underline steady cursor
+#ESC /           transmit cursor location (page, row, column)
+#ESC 0 p1 p2 p3 p4     program edit key:
+#                      p1 = edit key code: '@'-'S', '`'-'s'
+#                      p2 p3 p4 = program data (3 bytes)
+#
+#ESC 1           set tab
+#ESC 2           clear tab at cursor
+#ESC 3           clear all tabs
+#ESC 4           send unprotect line to cursor
+#ESC 5           send unprotect page to cursor
+#ESC 6           send line to cursor
+#ESC 7           send page to cursor
+#ESC 8 n         set scroll mode:
+#                n = 0   set jump scroll
+#                n = 1   set smooth scroll
+#ESC 9 n         control display:
+#                n = 0   display off
+#                n = 1   display on
+#ESC :           clear unprotected data to null
+#ESC ;           clear unprotected data to insert char
+#
+#ESC <           keyclick on
+#ESC = p1 p2     address cursor to row, column
+#                p1 = row          20h - 7fh
+#                p2 = column (lo)  20h - 7fh
+#                p3 = column (hi)  20h - 21h (only 132 col)
+#ESC >           keyclick off
+#ESC ?           transmit cursor location (row, column)
+#
+#ESC @           copy print mode on
+#ESC A           copy print mode off
+#ESC B           block mode on
+#ESC C           block mode off (conversation mode)
+#ESC D F         set full duplex
+#ESC D H         set half duplex
+#ESC E           line insert
+#ESC F p1 p2     set page colour (p1 = f/grnd, p2 = b/grnd)
+#                0 = black, 1 = red,     2 = green, 3 = yellow
+#                4 = blue,  5 = magenta, 6 = cyan,  7 = white
+#ESC G n         set serial field attribute (n = 30h - 3Fh)
+#ESC H n         full graphics mode:
+#                n = 0  exit full graphics mode
+#                n = 1  enter full graphics mode
+#ESC I           back tab
+#ESC J           back page
+#ESC K           forward page
+#
+#ESC L           unformatted page print
+#ESC M L         move window left  (132 col mode only)
+#ESC M R         move window right (132 col mode only)
+#ESC N           set page edit (clear line edit)
+#ESC O           set line edit (clear page edit)
+#ESC P           formatted page print
+#ESC Q           character insert
+#ESC R           line delete
+#ESC S           send message unprotected only
+#ESC T           erase line to insert char
+#ESC U           set monitor mode   (see ESC X, ESC u)
+#
+#ESC V n         select video attribute mode:
+#                n = 0   serial field attribute mode
+#                n = 1   parallel character attribute mode
+#ESC V 2 n       define line attribute:
+#                n = 0   single width single height
+#                n = 1   single width double height
+#                n = 2   double width single height
+#                n = 3   double width double height
+#ESC V 3 n       select character font:
+#                n = 0   system font
+#                n = 1   user defined font
+#ESC V 4 n       select screen mode:
+#                n = 0   page screen mode
+#                n = 1   virtual screen mode
+#ESC V 5 n       control mouse mode:
+#                n = 0   disable mouse
+#                n = 1   enable sample mode
+#                n = 2   send mouse information
+#                n = 3   enable request mode
+#ESC W           character delete
+#ESC X           clear monitor mode (see ESC U, ESC u)
+#ESC Y           erase page to insert char
+#
+#ESC Z n         send user/status line:
+#                n = 0   send user line
+#                n = 1   send status line
+#                n = 2   send terminal ID
+#ESC [ p1 p2 p3  set character attribute (parallel char mode):
+#                p1: 0 = normal
+#                    1 = blank
+#                    2 = blink
+#                    3 = blink blank (= blank)
+#                    4 = reverse
+#                    5 = reverse blank
+#                    6 = reverse blink
+#                    7 = reverse blink blank (= reverse blank)
+#                    8 = underline
+#                    9 = underline blank
+#                    : = underline blink
+#                    ; = underline blink blank
+#                    < = reverse underline
+#                    = = reverse underline blank
+#                    > = reverse underline blink
+#                    ? = reverse underline blink blank
+#                p2, p3: f/grnd, b/grnd colour
+#                (see ESC F for colours)
+#                use ZZ for mono, eg.
+#                    ESC [ 0 Z Z for normal
+#                    ESC [ 4 Z Z for inverse etc.
+#
+#ESC \ n         set page size:
+#                n = 1   24 lines/page
+#                n = 2   48 lines/page
+#                n = 3   72 lines/page
+#                n = 4   96 lines/page
+#ESC ] n         set Wordstar mode:
+#                n = 0   normal (KDS7372) mode
+#                n = 1   Wordstar mode
+#
+#ESC b           set foreground colour screen
+#
+#ESC c n         enter self-test mode:
+#                n = 0   exit self test mode
+#                n = 1   ROM test
+#                n = 2   RAM test
+#                n = 3   NVRAM test
+#                n = 4   screen display test
+#                n = 5   main/printer port test
+#                n = 6   mouse port test
+#                n = 7   graphics board test
+#                n = 8   graphics memory test
+#                n = 9   display all 'E'
+#                n = :   display all 'H'
+#ESC d           set background colour screen
+#
+#ESC e n         program insert char (n = insert char)
+#ESC f text CR   load user status line with 'text'
+#
+#ESC g           display user status line on 25th line
+#ESC h           display system status line on 25th line
+#ESC i           tab
+#ESC j           reverse linefeed
+#ESC k n         duplex/local edit mode:
+#                n = 0   duplex edit mode
+#                n = 1   local edit mode
+#ESC l n         select virtual screen:
+#                n = 0   screen 1
+#                n = 1   screen 2
+#ESC m           save current config to NVRAM
+#ESC n p1        select display screen:
+#                p1 = 0  screen 1
+#                p1 = 1  screen 2
+#                p1 = 2  screen 3
+#                p1 = 3  screen 4
+#ESC o p1 p2     set characters/line and attribute:
+#                p1 = 0  80 chars/line
+#
+#ESC o p1 p2     set characters/line and attribute:
+#                p1 = 0  80 chars/line
+#                p1 = 1  132 chars/line
+#                p2 = 0  single width single height
+#                p2 = 1  single width double height
+#                p2 = 2  double width single height
+#                p2 = 3  double width double height
+#
+#ESC q           insert mode on
+#ESC r           edit mode on
+#ESC s           send message all
+#ESC t           erase line to null
+#ESC u           clear monitor mode (see ESC U, ESC X)
+#ESC v           autopage mode on
+#ESC w           autopage mode off
+#ESC x p1 p2 p3  define delimiter code...
+#ESC y           erase page to null
+#
+#ESC z 2 p1 p2 p3 p4   draw quadrangle:
+#                      p1 = starting row
+#                      p2 = starting column
+#                      p3 = end row
+#                      p4 = end column
+#
+#ESC { p1 p2 p3 p4     configure main port
+#                      (baud, stop bits, parity, word length)
+#
+#ESC | p1 p2 text Ctrl-Y    program function key with 'text':
+#                        p1 = function key code:
+#                             '1' - ';'  normal f1- f11
+#                             '<' - 'F'  shifted f1 - f11
+#                        p2 = program mode:
+#                             1 = FDX
+#                             2 = LOC
+#                             3 = HDX
+#                        Ctrl-Y = terminator
+#                        (use Ctrl-P to escape ^P, ^Y )
+#
+#ESC } p1 p2 p3 p4     configure printer port
+#                      (baud, stop bits, parity, word length)
+#ESC ~           send system status
+#
+# Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
+#
+# Entry is by esr going solely on above information and is UNTESTED.
+# This actually looks a lot like a Televideo 9xx.
+# This entry uses page 0 and is monochrome; I'm not brave enough to try
+# to make color work without a test terminal.  The <am> capability is a guess.
+# The initialization string sets conversation mode, blinking underline cursor,
+# full duplex, parallel attribute mode, display user status line, white
+# foreground, black background, normal highlight.
+#
+icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
+	OTbs, am, hs,
+	cols#80, lines#24,
+	bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*, cnorm=\E.3,
+	cr=^M, csr=\E!%+%p1%{32}%+%p2%{32} cud1=^V, cuf1=^L, cup=\E=%p1%'
+	'%+%c%p2%{80}%m%' '%+%c%p2%{80}%>%' '%+%c, cuu1=^K, cvvis=\E.1,
+	dch=\EW, dl1=\ER, home=^^, ht=^I, hts=\E1, il1=\EE, invis=\E[1ZZ,
+	is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ, rmir=\Er,
+	rmso=\E[%gh%{4}%^%Ph%gh%dZZ, rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
+	sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ,
+	sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
+icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
+	rs2=\Eo1, use=icl6404,
+
+#### Interactive Systems Corp
+#
+# ISC used to sell OEMed and customized hardware to support ISC UNIX.
+# ISC UNIX still exists in 1995, but ISC itself is no more; they got
+# bought out by Sun.
+#
+
+# From: <cithep!eric>  Wed Sep 16 08:06:44 1981
+# (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
+# ":le=^_:" later overridden -- esr)
+intext|Interactive Systems Corporation modified owl 1200, 
+	am, OTbs,
+	cols#80, it#8, lines#24, xmc#1, 
+	bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, 
+	cud1=^J, cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, 
+	cuu1=^\, dch1=\022$<5.5*>, dl1=\021$<5.5*>, 
+	ed=\026J$<5.5*>, el=^Kp^R, ht=^I, il1=\020$<5.5*>, 
+	ind=^J, ip=$<5.5*>, kbs=^H, kcub1=^_, kcud1=^J, 
+	kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r, 
+	kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, 
+	kf6=^VF\r, kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, 
+	khome=^Z, rmir=^V<, rmkx=^V9, rmso=^V# , smir=^V;, 
+	smkx=\036\072\264\026%, smso=^V$\054, 
+intext2|intextii|INTERACTIVE modified owl 1251, 
+	am, bw, ul, 
+	cols#80, lines#24, xmc#0, 
+	bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, 
+	cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, 
+	flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u, 
+	hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, 
+	ind=\E[S, kbs=^H, kcub1=\ED\r, kcud1=\EB\r, 
+	kcuf1=\EC\r, kcuu1=\EA\r, kf0=\E@\r, kf1=\EP\r, 
+	kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r, kf5=\EU\r, 
+	kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r, 
+	khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, 
+	lf3=GOTO, lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, 
+	lf7=-SRCH, lf8=LEFT, lf9=RIGHT, ri=\E[T, 
+	rmso=\E[2\sD, rmul=\E[2\sD, smso=\E[6\sD, 
+	smul=\E[18\sD, 
+
+#### Kimtron (abm, kt)
+#
+# Kimtron seems to be history, but as March 1998 these people are still 
+# offering repair services for Kimtron equipment:
+#
+#    Com/Pair Monitor Service
+#    1105 N. Cliff Ave.
+#    Sioux Falls, South Dakota 57103
+#     
+#    WATS voice:  1-800/398-4946
+#    POTS   fax: +1 605/338-8709
+#    POTS voice: +1 605/338-9650
+#         Email: <compair@sd.cybernex.net>
+#  Internet/Web: <http://www.com-pair.com>
+#
+# Kimtron entries include (undocumented) codes for: enter dim mode,
+# enter bold mode, enter reverse mode, turn off all attributes.
+#
+
+# Kimtron ABM 85 added by Dual Systems
+# (abm85: removed duplicated ":kd=^J:" -- esr)
+abm85|Kimtron ABM 85, 
+	am, bw, msgr, OTbs,
+	cols#80, it#8, lines#24, xmc#1, 
+	cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER, ed=\Ey, el=\Et, ht=\t, 
+	if=/usr/share/tabset/stdcrt, il1=\EE, 
+	is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, 
+	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 
+	rmir=\Er, rmso=\Ek, rmul=\Em, smir=\EQ, smso=\Ej, 
+	smul=\El, 
+# Kimtron ABM 85H added by Dual Systems.
+# Some notes about the abm85h entries:
+# 1) there are several firmware revs of 85H in the world. Use abm85h-old for
+#    firmware revs prior to SP51
+# 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
+#    abm85e entry if it is in tvi920 emulation mode. They are incompatible
+#    in some places and NOT software settable i.e., <is2> can't fix it)
+# 3) In 85h mode, the arrow keys and special functions transmit when
+#    the terminal is in dup-edit, and work only locally in local-edit.
+#    Vi won't swallow `del char' for instance, but <smcup> turns on
+#    dup-edit anyway so that the arrow keys will work right. If the
+#    arrow keys don't work the way you like, change <smcup>, <rmcup>, and
+#    <is2>.  Note that 920E mode does not have software commands to toggle
+#    between dup and local edit, so you get whatever was set last on the
+#    terminal.
+# 4) <flash> attribute is nice, but seems too slow to work correctly
+#    (\Eb<pad>\Ed)
+# 5) Make sure `hidden' attributes are selected. If `embedded' attributes
+#    are selected, the <xmc@> entry should be removed.
+# 6) auto new-line should be on (selectable from setup mode only)
+#
+# From: Erik Fair <fair@ucbarpa>  Sun Oct 27 07:21:05 1985
+abm85h|Kimtron ABM 85H native mode, 
+	hs, xmc@, 
+	cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@, 
+	bel=^G, fsl=^M, 
+	is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El, 
+	kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef,
+	invis@, use=adm+sgr, use=abm85,
+abm85e|Kimtron ABM 85H in 920E mode, 
+	xmc@, 
+	bel=^G, dim=\E), flash@, 
+	is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em, 
+	rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
+abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev., 
+	xmc@, 
+	bel=^G, dim=\E),
+	is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF, 
+	rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
+# From: <malman@bbn-vax.arpa>
+# (kt7: removed obsolete :ma=^V^J^L :" -- esr)
+kt7|kimtron model kt-7, 
+	am, OTbs,
+	cols#80, it#8, lines#24, 
+	cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=\t, 
+	ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, 
+	is2=\El\E", kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, 
+	kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 
+	kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, 
+	kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 
+	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 
+	kich1=\EQ, kil1=\EE, tsl=\Ef,
+	invis@, use=adm+sgr, 
+# Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
+# other kt7 entry and the adjacent key capabilities).  Removed EE which is
+# identical to :mh:.  Removed :ES=\EGD: which is some kind of highlight
+# but we can't figure out what.
+kt7ix|kimtron model kt-7 or 70 in IX mode, 
+	am, bw, 
+	cols#80, it#8, lines#25, 
+	acsc=lZm@k?jYt4uCvAwBqDx3nE, bel=^G, blink=\EG2, cbt=\EI, 
+	civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, 
+	cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M, 
+	home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J, 
+	is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER, 
+	ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, 
+	kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 
+	kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ, 
+	nel=^M^J, pulse=\EK, rmacs=\E%, rmir=, rmso=\EG0, rmul=\EG0, 
+	sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef, 
+
+#### Microdata/MDIS
+#
+# This was a line of terminals made by McDonnell-Douglas Information Systems.
+# These entries come direct from MDIS documentation.  I have edited them only
+# to move primary names of the form p[0-9] * to aliases, and to comment out
+# <rmacs>/<smacs> in a couple of entries without <acsc> strings.  I have 
+# also removed the change history; the last version indicates this is
+# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
+#
+
+# McDonnell Information Systems Terminal Family History
+# =========================================
+#
+# Prism-1, Prism-2 and P99:
+#       Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
+#
+# Prism-4 and Prism-5:
+#       Slightly less ancient range of Microdata terminals. Follow-on from
+#       Prism-2, but with many enhancements. P5 has eight display pages.
+#
+# Prism-6:
+#       A special terminal for use with library systems, primarily in Germany.
+#       Limited numbers. Similar functionality to P5 (except attributes?).
+#
+# Prism-7, Prism-8 and Prism-9:
+#       More recent range of MDIS terminals, in which P7 and P8
+#       replace the P4 & P5, with added functionality, and P9 is the flagship.
+#       The P9 has two emulation modes - P8 and ANSI - and includes a
+#       large number of the DEC VT220 control sequences. Both
+#       P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
+#
+# Prism-12 and Prism-14:
+#       Latest range, functionally very similar to the P9.  The P14 has a
+#       black-on-white overscanning screen.
+#
+# The terminfo definitions given here are:
+#
+# p2      - Prism-2 (or Prism-1 or P99).
+#
+# p4      - Prism-4 (and older P7s & P8s).
+# p5      - Prism-5 (or Prism-6).
+#
+# p7      - Prism-7.
+# p8      - Prism-8 (in national or multinational mode).
+# p8-w    - 132 column version of p8.
+# p9      - Prism-9 in ANSI mode.
+# p9-w    - 132 column version of p9.
+# p9-8    - Prism-9 in Prism-8 emulation mode.
+# p9-8-w  - As p9-8, but with 132 columns.
+#
+# p12     - Prism-12 in ANSI mode.
+# p12-w   - 132 column version of p12.
+# p12-m   - Prism-12 in MDC emulation mode.
+# p12-m-w - As p12-m, but with 132 columns.
+# p14     - Prism-14 in ANSI mode.
+# p14-w   - 132 column version of p14.
+# p14-m   - Prism-14 in MDC emulation mode.
+# p14-m-w - As p14-m, but with 132 columns.
+#
+# p2: Prism-2
+# -----------
+#
+# Includes Prism-1 and basic P99 without SP or MP loaded.
+# The simplest form of Prism-type terminal.
+# Basic cursor movement and clearing operations only.
+# No video attributes.
+# Notes:
+#  Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
+#  value up, followed by backspace.
+#
+prism2|MDC Prism-2,
+	am, bw, msgr,
+	cols#80, lines#24,
+	bel=^G, clear=\f$<20>, cr=\r,
+	cub1=\b, cud1=\n, cuf1=^F,
+	cup=^K%p1%'\s'%+%c^P%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
+	cuu1=^Z, ed=\EJ, el=\EK, home=^A,
+	hpa=^P%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, ind=\n,
+	kbs=\b, khome=^A,
+	vpa=^K%p1%'\s'%+%c,
+
+# p4: Prism-4
+# -----------
+#
+# Includes early versions of P7 & P8.
+# Basic family definition for most Prisms (except P2 and P9 ANSI).
+# Notes:
+#  Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
+#  value up, followed by backspace.
+#  Cursor key definitions removed because they interfere with vi and csh keys.
+#
+prism4|p4|P4|MDC Prism-4,
+	am, bw, hs, mc5i, msgr,
+	cols#80, lines#24, wsl#72, xmc#1,
+	bel=^G, blink=^CB, clear=\f$<20>, cr=\r, civis=^]\344, cnorm=^]\342,
+	cub1=\b, cud1=\n, cuf1=^F,
+	cup=^K%p1%'\s'%+%c^P%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
+	cuu1=^Z, dsl=^]\343^]\345, dim=^CA, ed=\EJ, el=\EK, fsl=^]\345, home=^A,
+	hpa=^P%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, ind=\n, invis=^CH,
+	kbs=\b, khome=^A,
+	mc0=\EU, mc4=\ET, mc5=\ER,
+	rev=^CD, rmso=^C\s, rmul=^C\s,
+	sgr=^C%'@'%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t^N%e^O%;,
+	sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
+	vpa=^K%p1%'\s'%+%c,
+
+# p5: Prism-5
+# -----------
+#
+# Same definition as p4. Includes Prism-6 (not tested!).
+# Does not use any multi-page features.
+#
+prism5|p5|P5|MDC Prism-5,
+	use=p4,
+
+# p7: Prism-7
+# -----------
+#
+# Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
+# Notes:
+#  Use p4 for very early models of P7.
+#  Rev-index removed; can't send nulls to terminal in 8-bit modes.
+#
+prism7|p7|P7|MDC Prism-7,
+	cup=\E[%i%p1%d;%p2%dH,
+	hpa@,
+	.ri=^]\355^A\000\000\000^N0^]\357\000\000\000P\s$<25>,
+	vpa@,
+	use=p4,
+
+# p8: Prism-8
+# -----------
+#
+# Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
+# Supports national and multinational character sets.
+# Notes:
+#  Alternate char set operations only work in multinational mode.
+#  Use p4 for very early models of P8.
+#  Rev-index removed; can't send nulls to terminal in 8-bit modes.
+# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
+#
+prism8|p8|P8|MDC Prism-8,
+	cup=\E[%i%p1%d;%p2%dH,
+	hpa=\E[%i%p1%d`,
+	is2=\E[<12h,
+	.rmacs=^O, .smacs=^N,
+	.ri=^]\355^A\000\000\000^N0^]\357\000\000\000P\s$<25>,
+	vpa=\E[%i%p1%dd,
+	use=p4,
+
+# p8-w: Prism-8 in 132 column mode
+# --------------------------------
+#
+# 'Wide' version of p8.
+# Notes:
+#  Rev-index removed; can't send nulls to terminal in 8-bit modes.
+#
+prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
+	cols#132,
+	is2=\E[<12h\E[<14h,
+	.ri=^]\355\r\000\f\000^K\,^]\355^A\000\000\000\f0^]\357\000\000\201\204$<25>,
+	use=p8,
+
+# p9: Prism-9 in ANSI mode
+# -------------------------
+#
+# The "flagship" model of this generation of terminals.
+# ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
+# Notes:
+#  Tabs only reset by "reset". Otherwise assumes default (8 cols).
+#  Fixes to deal with terminal firmware bugs:
+#  . 'ri' uses insert-line since rev index doesn't always
+#  . 'sgr0' has extra '0' since esc[m fails
+#  . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
+#  Not covered in the current definition:
+#  . Labels
+#  . Programming Fn keys
+#  . Graphic characters (defaults correctly to vt100)
+#  . Padding values (sets xon)
+# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
+#
+prism9|p9|P9|MDC Prism-9 in ANSII mode,
+	am, bw, hs, mc5i, msgr, xenl, xon,
+	cols#80, it#8, lines#24, vt#3, wsl#72,
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l, cnorm=\E[<4h,
+	clear=\f, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, cuu=\E[%p1%dA,
+	cr=\r, csr=\E[%i%p1%d;%p2%d%%v,
+	cub1=\b, cud1=\n, cuf1=\E[C, cuu1=\E[A, cup=\E[%i%p1%d;%p2%dH,
+	dch1=\E[P, dch=\E[%p1%dP, dl1=\E[M, dl=\E[%p1%dM, dsl=\E[%}\024,
+	ech=\E[%p1%dX, ed=\E[J$<10>, el=\E[K, .enacs=^N, fsl=\024,
+	home=\E[H, hpa=\E[%i%p1%d`, ht=\t, hts=\EH,
+	.ich1=\E[@, .ich=\E[%p1%d@, il1=\E[L, il=\E[%p1%dL, ind=\n,
+	is2=\E[&p\E[<12l\E\sF,
+	kbs=\b, kclr=\f, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+   kf1=\E[11~,kf2=\E[12~,kf3=\E[13~,kf4=\E[14~,kf5=\E[15~,
+	kf6=\E[17~,kf7=\E[18~,kf8=\E[19~,kf9=\E[20~,kf10=\E[21~,
+	kf11=\E[23~,kf12=\E[24~,kf13=\E[25~,kf14=\E[26~,kf15=\E[28~,
+	kf16=\E[29~,kf17=\E[31~,kf18=\E[32~,
+	khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\r\n,
+	prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L,
+	.rmacs=^O, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+	rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73\sN, sc=\E[%y,
+	sgr=\E[%{0}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{2}%+%;%?%p4%t%{1}%+%;%?%p6%t%{8}%+%;%?%p8%t%{32}%+%;%d%%{%?%p9%t^N%e^O%;,
+	sgr0=\E[0m, .smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+	tbc=\E[2g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
+
+# p9-w: Prism-9 in 132 column mode
+# --------------------------------
+#
+# 'Wide' version of p9.
+#
+prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
+	cols#132,
+	is2=\E[&p\E[<12l\E\sF\E[<14h,
+	rs2=\E[&p\E[<12l\E\sF\E[<14h,
+	use=p9,
+
+# p9-8: Prism-9 in P8 mode
+# ------------------------
+#
+# P9 terminal in P8 emulation mode.
+# Similar to p8 definition.
+# Insertion and deletion operations possible.
+#
+prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
+	dch1=\E[P, dch=\E[%p1%dP, dl1=\E[M, dl=\E[%p1%dM,
+	ich1=\E[@, ich=\E[%p1%d@, il1=\E[L, il=\E[%p1%dL,
+	use=p8,
+
+# p9-8-w: Prism-9 in P8 and 132 column modes
+# ------------------------------------------
+#
+# P9 terminal in P8 emulation mode and 132 column mode.
+#
+prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
+	dch1=\E[P, dch=\E[%p1%dP, dl1=\E[M, dl=\E[%p1%dM,
+	ich1=\E[@, ich=\E[%p1%d@, il1=\E[L, il=\E[%p1%dL,
+	use=p8-w,
+
+# p12: Prism-12 in ANSI mode
+# ---------------------------
+#
+# See p9 definition.
+#
+prism12|p12|P12|MDC Prism-12 in ANSI mode,
+       use=p9,
+
+# p12-w: Prism-12 in 132 column mode
+# ----------------------------------
+#
+# 'Wide' version of p12.
+#
+prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
+       use=p9-w,
+
+# p12-m: Prism-12 in MDC emulation mode
+# -------------------------------------
+#
+# P12 terminal in MDC emulation mode.
+# Similar to p8 definition.
+# Insertion and deletion operations possible.
+#
+prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
+       use=p9-8,
+
+# p12-m-w: Prism-12 in MDC emulation and 132 column modes
+# -------------------------------------------------------
+#
+# P12 terminal in MDC emulation mode and 132 column mode.
+#
+prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
+       use=p9-8-w,
+
+# p14: Prism-14 in ANSII mode
+# ---------------------------
+#
+# See p9 definition.
+#
+prism14|p14|P14|MDC Prism-14 in ANSII mode,
+       use=p9,
+
+# p14-w: Prism-14 in 132 column mode
+# ----------------------------------
+#
+# 'Wide' version of p14.
+#
+prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
+       use=p9-w,
+
+# p14-m: Prism-14 in MDC emulation mode
+# -------------------------------------
+#
+# P14 terminal in MDC emulation mode.
+# Similar to p8 definition.
+# Insertion and deletion operations possible.
+#
+prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
+       use=p9-8,
+
+# p14-m-w: Prism-14 in MDC emulation and 132 column modes
+# -------------------------------------------------------
+#
+# P14 terminal in MDC emulation mode and 132 column mode.
+#
+prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
+       use=p9-8-w,
+
+# End of McDonnell Information Systems Prism definitions
+
+# These things were popular in the Pick database community at one time
+# From: George Land <georgeland@aol.com> 24 Sep 1996
+p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
+	am, bw, hs, mir,
+	cols#80, lines#24, ma#1, wsl#78, xmc#1,
+	bel=^G, blink=^CB, clear=\f, cr=\r, cub1=^U, cud1=\n,
+	cuf1=^F, cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s\b,
+	dim=^CA, dl1=^P, ed=\EJ, el=\EK, home=^A, ind=\n,
+	invis=^CH, kbs=\b, kcub1=^U, kcud1=\n, kcuf1=^F,
+	kcuu1=^Z, kdch1=\s\b, kdl1=^P, ked=\EJ, kel=\EK,
+	kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
+	kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r,
+	kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1,
+	lf10=F10, lf2=F2, lf3=F3, lf4=F4, lf5=F5, lf6=F6,
+	lf7=F7, lf8=F8, lf9=F9, nel=\n\r, pad=\0, rev=^CD,
+	rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE, smul=^C0,
+
+#### Microterm (act, mime)
+#
+# The mime1 entries refer to the Microterm Mime I or Mime II.
+# The default mime is assumed to be in enhanced act iv mode.
+#
+
+# New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>.  Prevents
+# freakout with out-of-range args on Sytek multiplexors.  No <smso=^N> and
+# <rmso=^N> since  it gets confused and it's too dim anyway.  No <ich1>
+# since Sytek insists ^S means xoff.
+# (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
+act4|microterm|microterm act iv, 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=^L$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X, 
+	cup=\024%p1%{24}%+%c%p2%p2%?%'/'%>%t%'0'%+%;%'P'%+%c, 
+	cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>, ed=\037$<2.2*/>, 
+	el=\036$<.1*/>, home=^], il1=\001<2.3*/>, ind=^J, kcub1=^H, 
+	kcud1=^K, kcuf1=^X, kcuu1=^Z, 
+# The padding on :sr: and :ta: for act5 and mime is a guess and not final.
+# The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
+# (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
+act5|microterm5|microterm act v, 
+	kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, 
+	uc=^H\EA, use=act4,
+# Mimes using brightness for standout.  Half bright is really dim unless
+# you turn up the brightness so far that lines show up on the screen.
+mime-fb|full bright mime1, 
+	is2=^S\E, rmso=^S, smso=^Y, use=mime,
+mime-hb|half bright mime1, 
+	is2=^Y\E, rmso=^Y, smso=^S, use=mime,
+# (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
+# the more plausible ":do=^J:" -- esr)
+# uc was at one time disabled to get around a curses bug, be wary of it
+mime|mime1|mime2|mimei|mimeii|microterm mime1, 
+	am, OTbs,
+	cols#80, it#8, lines#24, vt#9, 
+	bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X, 
+	cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%'0'%+%;%'P'%+%c, 
+	cuu1=^Z, dl1=^W$<80>, ed=^_, el=^^, home=^], ht=^I$<2>, 
+	il1=^A$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K, kcuf1=^X, 
+	kcuu1=^Z, ri=^R$<3>, uc=^U, 
+# These termcaps (for mime2a) put the terminal in low intensity mode
+# since high intensity mode is so obnoxious.
+mime2a-s|microterm mime2a (emulating an enhanced soroc iq120), 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, 
+	dch1=\ED, dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^, 
+	il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J, 
+	kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, 
+	rmul=\E7, smir=\EE, smso=\E\072, smul=\E6, 
+# This is the preferred mode (but ^X can't be used as a kill character)
+mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52), 
+	cols#80, it#8, lines#24, OTbs,
+	bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N, 
+	dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I, 
+	il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED, kcud1=\EB, 
+	kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9, 
+	rmul=\E5, smir=^O, smso=\E8, smul=\E4, 
+# (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
+mime3a|mime1 emulating 3a, 
+	am@,
+	kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
+mime3ax|mime-3ax|mime1 emulating enhanced 3a, 
+	it#8,  
+	dl1=^W$<80>, ed=^_, el=^X, ht=\011$<3>, il1=^A$<80>, use=mime3a,
+# Wed Mar  9 18:53:21 1983
+# We run our terminals at 2400 baud, so there might be some timing problems at
+# higher speeds. The major improvements in this model are the terminal now 
+# scrolls down and insert mode works without redrawing the rest of the line
+# to the right of the cursor. This is done with a bit of a kludge using the
+# exit graphics mode to get out of insert, but it does not appear to hurt
+# anything when using vi at least. If you have some users using act4s with
+# programs that use curses and graphics mode this could be a problem.
+mime314|mm314|mime 314,
+	am, cub1=^H, ht=^I, ed=^_, el=^^, clear=^L, cup=^T%p1%c%p2%c,
+	cols#80, lines#24, cuf1=^X, cuu1=^Z,
+	home=^], kcud1=^K, kcub1=^H, kcuf1=^X, kcuu1=^Z,
+	il1=^A, dch1=^D, dl1=^W, smir=^S, rmir=^V, 
+# Microterm mime 340 from University of Wisconsin
+mm340|mime340|mime 340, 
+	cols#80, lines#24, 
+	clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>, 
+	el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, 
+	is2=\E\054, kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, 
+	nel=^M^J, 
+# This came from University of Wisconsin marked "astro termcap for jooss".
+# (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
+# also added <rmam>/<smam> based  on the init string -- esr)
+mt4520-rv|micro-term 4520 reverse video, 
+	am, hs, msgr, xenl, xon, 
+	cols#80, it#8, lines#24, wsl#80, 
+	bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 
+	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, 
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 
+	flash=\E[?5l$<200/>\E[?5h, fsl=\E[?5l\E[?5h, 
+	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 
+	ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 
+	is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J, 
+	kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
+	kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
+	khome=\E[H, ll=\E[24;1H, nel=\EE, rc=\E8, 
+	rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l, 
+	rmso=\E[0m, rmul=\E[24m, 
+	rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J, 
+	sc=\E7, sgr0=\E[m, smam=\E[?7h,  smso=\E[7m, smul=\E[4m, tbc=\E[g, 
+	tsl=\E[25;1H, 
+
+# Fri Aug  5 08:11:57 1983
+# This entry works for the ergo 4000 with the following setups:
+# ansi,wraparound,newline disabled, xon/xoff disabled in both
+# setup a & c.
+#	
+# WARNING!!! There are multiple versions of ERGO 4000 microcode
+# Be advised that very early versions DO NOT WORK RIGHT !!  
+# Microterm does have a ROM exchange program- use it or lose big
+# (ergo400: added <rmam>/<smam> based on the init string -- esr)
+ergo4000|microterm ergo 4000,
+	cr=^M, cud1=^J, ind=^J, bel=^G, ed=\E[0J$<15>, el=\E[0K$<13>,
+	clear=\E[H\E[2J$<80>, cub1=^H, cuf1=\E[C, cuu1=\E[A, cud1=\E[B,
+	cup=\E[%i%p1%d;%p2%dH, cols#80, lines#66, da, db, dch1=\E[1P$<80>,
+	il=\E[1L$<5*>, dl1=\E[1M$<5*>, smir=\E[4h$<6>, rmir=\E[4l,
+	is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>, kf1=\EOP,
+	kf2=\EOQ, kf3=\EOR, kf4=\EOS, kcud1=\E[B, rmkx=\E=$<4>,
+	kcub1=\E[D, kcuf1=\E[C, smkx=\E=$<4>, kcuu1=\E[A, lf1=pf1,
+	lf2=pf2, lf3=pf3, lf4=pf4, msgr, ht=^I, rmam=\E[?7l, rmso=\E[m$<20>,
+	sgr0=\E[m$<20>, smam=\E[?7m, smso=\E[7m$<20>, ri=\EM$<20*>,
+	ind=\ED$<20*>,
+
+#### NCR 
+#
+# NCR's terminal group was merged with AT&T's when AT&T bought the company.
+# For what happened to that group, see the ADDS section.
+#
+# There is an NCR4103 terminal that's just a re-badged Wyse-50.
+#
+
+# The following vendor-supplied termcaps were captured from the Boundless
+# Technologies site, 8 March 1998.  I removed all-upper-case names that were
+# identical, except for case, to lower-case ones.  I also uncommented the acsc
+# capabilities.X
+#
+# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
+# DEC vt200/300 with color capabilities added.
+ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
+	colors#8, pairs#64,
+	op=\E[0m,
+	setaf=\E[3%p1%dm,
+	setab=\E[4%p1%dm,
+	use=ncr260vt300an,
+# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
+# DEC vt200/300 with color capabilities added.
+ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
+	colors#8, pairs#64,
+	op=\E[0m,
+	setaf=\E[3%p1%dm,
+	setab=\E[4%p1%dm,
+	use=ncr260vt300wan,
+# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a DEC 
+# vt200/300 with color capabilities added.
+ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
+	colors#8, pairs#64,
+	op=\E[0m,
+	setaf=\E[3%p1%dm,
+ 	setab=\E[4%p1%dm,
+	use=ncr260vt300pp,
+# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
+# DEC vt200/300 with color capabilities added.
+ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
+	colors#8, pairs#64,
+	op=\E[0m,
+	setaf=\E[3%p1%dm,
+	setab=\E[4%p1%dm,
+	use=ncr260vt300wpp,
+# This definition for ViewPoint supports several attributes.  This means
+# that it has magic cookies (extra spaces where the attributes begin).
+# Some applications do not function well with magic cookies.  The System
+# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 
+# If supporting various attributes is not vital, 'xmc#1' and the extra
+# attributes can be removed. 
+# Mapping to ASCII character set ('acsc' capability) can also be 
+# restored if needed.
+ncr260vppp|NCR 2900_260 viewpoint,
+	am, hs, bw, xon, msgr, km, mir, mc5i,
+ 	xmc#1,
+	cols#80, lines#24, nlab#32,
+	cuu1=^Z$<2>, cud1=^J$<2>, cub1=^H$<2>, cuf1=^F$<2>, 
+	home=^^$<2>, ll=^A$<5>, cr=^M$<2>, 
+ 	acsc=a?h;07j5k3l2m1n8q:t4u9v=w0x6,
+	cup=\EY%p1%'\s'%+%c%p2%'\s'%+%c$<5>,
+	mrcup=\Ew@%p1%{48}%+%c%p2%'\s'%+%c%p3%'\s'%+%c$<5>,
+	ind=^J$<2>, ri=\Ej$<2>, nel=^_$<2>, tsl=\EF, 
+	fsl=^M, dsl=\E`c, il1=\EM$<2>, 
+	clear=^L$<40>, ed=\Ek$<2>, el=\EK$<2>, dl1=\El$<2>, 
+	dch1=\EW$<2>, smir=\Eq, rmir=\Er,
+	hts=\E1, ht=^I, cbt=\EI, 
+	smso=\EG4, rmso=\EG0, 
+	smul=\EG8, rmul=\EG0,
+	smxon=\Ec21, rmxon=\Ec20, 
+	rev=\EG4, blink=\EG2, 
+	dim=\EGp, invis=\EG1, 
+	bel=^G, cvvis=\E`5, civis=\E`0, cnorm=\E`5,
+	sgr0=\EG0\EH^C, 
+	smacs=\EcB1\EH^B, rmacs=\EcB0\EH^C, 
+	kf1=^B1^M, kf2=^B2^M, kf3=^B3^M,
+	kf4=^B4^M, kf5=^B5^M, kf6=^B6^M, kf7=^B7^M, kf8=^B8^M, kf9=^B9^M,
+	kf10=^B:^M, kf11=^B;^M, kf12=^B<^M, kf13=^B=^M, kf14=^B>^M,     
+	kf15=^B?^M, kf16=^B@^M, kf17=^B!^M, kf18=^B"^M, kf19=^B#^M, 
+	kf20=^B$^M, kf21=^B%^M, kf22=^B&^M, kf23=^B'^M, kf24=^B(^M, 
+	kf25=^B)^M, kf26=^B*^M, kf27=^B+^M, kf28=^B\,^M, kf29=^B-^M,  
+	kf30=^B.^M, kf31=^B/^M, kf32=^B0^M, kcuu1=^Z, kcub1=^U, kcuf1=^F, 
+	kcud1=^J, khome=^A, ka1=^A, ka3=\EJ, kc1=\ET, kc3=\EJ, kbs=^H,
+	kdch1=\EW, kich1=\Eq, knp=\EJ, kpp=\EJ, kHOM=^A, 
+	kend=\EK, kprt=\EP, kDC=\El, kEND=\Ek, kPRT=\E7, kRIT=^F,
+	mc0=\EP$<100>, mc5=^R, mc4=^T,  
+	is2=\Ee6\E~%$<100>\E+\E`:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
+	rs2=\Ee6\E~%$<100>\E+\E`:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
+ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
+	cols#132, 
+	cup=\Ea%i%p1%dR%p2%dC$<30>,
+	is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
+	rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
+	use=ncr260vppp,
+ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
+	am, hs, mir, msgr, xon, nlab#32, xenl,
+	lines#24, cols#80, 
+	cuu=\E[%p1%dA$<5>, cuu1=\E[A$<5>,
+	cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
+	cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, 
+	cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, 
+	home=\E[H$<1>, cr=^M$<1>,
+	cup=\E[%i%p1%d;%p2%dH$<10>,
+	hpa=\E[%p1%dG$<40>, vpa=\E[%p1%dd$<40>, 
+	sc=\E7, rc=\E8, bel=^G, 
+ 	kbs=^H, acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~,
+	ind=\ED$<5>, ri=\EM$<5>, indn=\E[%p1%dE$<5>, 
+	csr=\E[%i%p1%d;%p2%dr, nel=\EE$<5>, 
+	tsl=\E[2$~\E[1$}, fsl=\E[0$}, dsl=\E[0$~\E[1$~, 
+	clear=\E[2J\E[1;1H$<20>, ed=\E[0J$<5>, 
+	el=\E[0K$<3>, el1=\E[1K$<3>,
+	dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, 
+	il=\E[%p1%dL$<5>, il1=\E[L$<5>,
+	dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
+	ech=\E[%p1%dX, smir=\E[4h, 
+	rmir=\E[4l, ich=\E[%p1%d@$<5>, 
+	civis=\E[?25l, cnorm=\E[?25h, 
+	hts=\EH, tbc=\E[3g, ht=^I, 
+	smso=\E[1;7m, rmso=\E[0m, 
+	smul=\E[4m, rmul=\E[0m, 
+	smacs=^N, rmacs=^O,
+	rev=\E[7m, blink=\E[5m, bold=\E[1m, invis=\E[8m, 
+ 	smkx=\E[?1h\E=, rmkx=\E[?1l\E>,
+	sgr0=\E[0m^O$<20>,
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;$<20>, 
+ 	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
+ 	kcuu1=\EOA, kcub1=\EOD, kcuf1=\EOC, kcud1=\EOB, 
+ 	kdch1=\E[3~, kich1=\E[2~, kfnd=\E[1~, krdo=\E[29~,
+ 	kslt=\E[4~, knp=\E[6~, kpp=\E[5~, khlp=\E[28~,
+ 	ka1=\EOw, kb2=\EOy, ka3=\EOu, 
+ 	kc1=\EOq, kc3=\EOs, kent=\EOM, 
+	is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+	rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd, 
+	cols#132, 
+	cup=\E[%i%p1%d;%p2%dH$<30>,  
+	is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+	rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+	use=ncr260vt100an,
+ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
+	kich1=\E[1~, kdch1=\E[4~, khome=\E[2~, 
+	kend=\E[5~, kpp=\E[3~, knp=\E[6~,
+ 	kcuu1=\E[A, kcub1=\E[D, kcuf1=\E[C, kcud1=\E[B, 
+	lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
+ 	smkx=\E=, rmkx=\E>,
+ 	ka1=\E[H, kb2=\E[V, ka3=\EOu, kc3=\E[U, 
+	is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+	rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+	use=ncr260vt100an,
+ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+  kybd, 
+	cols#132, 
+	cup=\E[%i%p1%d;%p2%dH$<30>,  
+	is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+	rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+	use=ncr260vt100pp,
+ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
+	am, hs, mir, msgr, xenl, xon,
+	cols#80, lines#24, nlab#32,
+	acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
+	blink=\E[5m, bold=\E[1m, invis=\E[8m, 
+	clear=\E[2J\E[1;1H$<20>, rev=\E[7m,
+	cr=\r$<1>, kbs=\b, home=\E[H, 
+	cup=\E[%i%p1%d;%p2%dH$<10>, csr=\E[%i%p1%d;%p2%dr$<5>, 
+	cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, 
+	cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
+	cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
+	cuu=\E[%p1%dA$<5>, cuu1=\E[A$<5>, 
+	dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
+	dl=\E[%p1%dM$<5>, dl1=\E[M$<5>,
+	ich=\E[%p1%d@$<5>, 
+ 	il=\E[%p1%dL$<5>, 
+	il1=\E[L$<5>, 
+	el=\E[0K$<5>, el1=\E[1K$<5>, ech=\E[%p1%dX$<5>,
+	dsl=\E[0$~\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$},
+	ed=\E[0J, 
+	hpa=\E[%p1%dG$<40>, vpa=\E[%p1%dd$<40>,
+	ht=\t, hts=\EH, tbc=\E[3g, 
+	ind=\ED$<5>, indn=\E[%p1%dE$<5>, ri=\EM$<5>, nel=\EE,
+	civis=\E[?25l, cnorm=\E[?25h, sc=\E7, rc=\E8,
+	mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
+ 	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	kdch1=\E[3~, kich1=\E[2~, kfnd=\E[1~, krdo=\E[29~,
+	kslt=\E[4~, knp=\E[6~, kpp=\E[5~, khlp=\E[28~,
+ 	ka1=\EOw, kb2=\EOy, ka3=\EOu, 
+ 	kc1=\EOq, kc3=\EOs, kent=\EOM, 
+ 	kf0=\EOy, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~, 
+	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+	kf18=\E[32~, kf19=\E[33~, 
+	kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, kf24=\E[34~,
+	kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, kf28=\E[3~,
+	kf29=\E[4~, kf30=\E[5~, kf31=\E[6~,
+	kf32=\E[7~, kf33=\E[8~, kf34=\E[9~, kf35=\E[10~,
+ 	smkx=\E[?1h\E=, rmkx=\E[?1l\E>, 
+	smso=\E[7m, rmso=\E[27m, 
+	smam=\E[?7h, rmam=\E[?7l, 
+	smul=\E[4m, rmul=\E[24m,
+	smir=\E[4h, rmir=\E[4l, 
+	smacs=^N$<20>, rmacs=^O$<20>,
+	sgr0=\E[0m^O$<20>, 
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;$<20>,
+	is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+	rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd, 
+	cols#132, cup=\E[%i%p1%d;%p2%dH$<30>, 
+	is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0^O\E[2J\E[1;1H$<200>,
+	rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0^O\E[2J\E[1;1H$<200>,
+	use=ncr260vt200an,
+ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	kich1=\E[2~, khome=\E[H, knp=\E[6~, 
+	kdch1=\E[4~, kend=\E[1~, kpp=\E[5~,
+	lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, 
+ 	ka1=\E[H, kb2=\E[V, ka3=\EOu, kc3=\E[U, 
+	smkx=\E=, rmkx=\E>, 
+	use=ncr260vt200an,
+ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+  kybd, 
+	cols#132, cup=\E[%i%p1%d;%p2%dH$<30>, 
+	is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+	rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+	use=ncr260vt200pp,
+ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
+	am, hs, mir, msgr, xenl, xon,
+	cols#80, lines#24, nlab#32,
+	acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
+	blink=\E[5m, bold=\E[1m, invis=\E[8m, 
+	clear=\E[2J\E[1;1H$<20>, rev=\E[7m,
+	cr=\r$<1>, kbs=\b, home=\E[H, 
+	cup=\E[%i%p1%d;%p2%dH$<10>, csr=\E[%i%p1%d;%p2%dr$<5>, 
+	cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, 
+	cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
+	cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
+	cuu=\E[%p1%dA$<5>, cuu1=\E[A$<5>, 
+	dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
+	dl=\E[%p1%dM$<5>, dl1=\E[M$<5>,
+	ich=\E[%p1%d@$<5>, 
+ 	il=\E[%p1%dL$<5>, 
+	il1=\E[L$<5>, 
+	el=\E[0K$<5>, el1=\E[1K$<5>, ech=\E[%p1%dX$<5>,
+	dsl=\E[0$~\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$},
+	ed=\E[0J, 
+	hpa=\E[%p1%dG$<40>, vpa=\E[%p1%dd$<40>,
+	ht=\t, hts=\EH, tbc=\E[3g, 
+	ind=\ED$<5>, indn=\E[%p1%dE$<5>, ri=\EM$<5>, nel=\EE,
+	civis=\E[?25l, cnorm=\E[?25h, sc=\E7, rc=\E8,
+	mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
+ 	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	kdch1=\E[3~, kich1=\E[2~, kfnd=\E[1~, krdo=\E[29~,
+	kslt=\E[4~, knp=\E[6~, kpp=\E[5~, khlp=\E[28~,
+ 	ka1=\EOw, kb2=\EOy, ka3=\EOu, 
+ 	kc1=\EOq, kc3=\EOs, kent=\EOM, 
+ 	kf0=\EOy, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~, 
+	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+	kf18=\E[32~, kf19=\E[33~, 
+	kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, kf24=\E[34~,
+	kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, kf28=\E[3~,
+	kf29=\E[4~, kf30=\E[5~, kf31=\E[6~,
+	kf32=\E[7~, kf33=\E[8~, kf34=\E[9~, kf35=\E[10~,
+ 	smkx=\E[?1h\E=, rmkx=\E[?1l\E>, 
+	smso=\E[7m, rmso=\E[27m, 
+	smam=\E[?7h, rmam=\E[?7l, 
+	smul=\E[4m, rmul=\E[24m,
+	smir=\E[4h, rmir=\E[4l, 
+	smacs=^N$<20>, rmacs=^O$<20>,
+	sgr0=\E[0m^O$<20>, 
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;$<20>,
+	is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+	rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
+	cols#132, cup=\E[%i%p1%d;%p2%dH$<30>, 
+	is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0^O\E[2J\E[1;1H$<200>,
+	rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0^O\E[2J\E[1;1H$<200>,
+	use=ncr260vt300an,
+ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	kich1=\E[2~, khome=\E[H, knp=\E[6~, 
+	kdch1=\E[4~, kend=\E[1~, kpp=\E[5~, 
+	lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, 
+ 	ka1=\E[H, kb2=\E[V, ka3=\EOu, kc3=\E[U, 
+	smkx=\E=, rmkx=\E>, 
+	use=ncr260vt300an,
+NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+  kybd, 
+	cols#132, cup=\E[%i%p1%d;%p2%dH$<30>, 
+	is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+	rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0^O\E[2J\E[1;1H\E>$<200>,
+	use=ncr260vt300pp,
+# This terminfo file contains color capabilities for the Wyse325 emulation of 
+# the NCR 2900/260C color terminal.  Because of the structure of the command
+# (escape sequence) used to set color attributes, one of the fore/background
+# colors must be preset to a given value. I have set the background color to
+# black.  The user can change this setup by altering the last section of the
+# 'setf' definition.  The escape sequence to set color attributes is 
+#		ESC d y <foreground_color> <background_color> 1  
+# In addition, the background color can be changed through the desk accessories.
+# The capablitiy 'op' sets colors to green on black (default combination).  
+#
+# NOTE:  The NCR Unix System Administrator's Shell will not function properly
+# 	    if the 'pairs' capability is defined. Un-Comment the 'pairs'
+#	    capability and recompile if you wish to have it included. 
+#
+ncr260wy325pp|NCR 2900_260 wyse 325,
+	am, bw, hs, mir, msgr, xon, km, mc5i, 
+	cols#80, lines#24, nlab#32,
+	colors#16, 
+	.pairs#16, 
+	ncv#33, 
+	.op=\Edy311,
+	setb=\s,
+	setf=%?%p1%{0}%=%t%'1'
+		%e%p1%{1}%=%t%'2'
+		%e%p1%{2}%=%t%'3'
+		%e%p1%{3}%=%t%'4'
+		%e%p1%{4}%=%t%'5'
+		%e%p1%{5}%=%t%'6'
+		%e%p1%{6}%=%t%'7'
+		%e%p1%{7}%=%t%'@'
+		%e%p1%{8}%=%t%'9'
+		%e%p1%{9}%=%t%':'
+		%e%p1%{10}%=%t%';'
+		%e%p1%{11}%=%t%'<'
+		%e%p1%{12}%=%t%'='
+		%e%p1%{13}%=%t%'>'
+		%e%p1%{14}%=%t%'?'
+		%e%p1%{15}%=%t%'8'%;\Edy%c11$<100>,
+	bel=^G, cbt=\EI,
+	cud1=^J$<5>, cub1=^H$<5>, cuf1=^L$<5>, cuu1=^K$<5>,
+	home=^^$<5>, cr=^M,  
+	acsc=a?h;07j5k3l2m1n8q:t4u9v=w0x6,
+	cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c$<10>,
+	mrcup=\Ew@%p1%{48}%+%c%p2%'\s'%+%c%p3%'\s'%+%c$<10>,
+	ind=^J$<5>, ri=\Ej$<5>, nel=^_$<5>,
+	tsl=\EF, fsl=^M, dsl=\E`c,
+	il1=\EE$<5>, clear=\E*$<10>,
+	ed=\Ey$<5>, el=\Et$<5>,
+	dl1=\ER$<5>, dch1=\EW$<50>,
+	smir=\Eq, rmir=\Er,
+	smam=\Ed/, rmam=\Ed., 
+	hts=\E1, tbc=\E0, kcbt=\EI, ht=^I,
+	smso=\EGt, rmso=\EG0,
+	smul=\EG8, rmul=\EG0,
+	rev=\EG4, blink=\EG2, invis=\EG1,
+	smacs=\EH^B\EcB1, rmacs=\EH^C\EcB0,
+ 	.enacs=\EcD,
+	sgr0=\EG0\EcB0\EcD$<15>,
+	cvvis=\E`5, civis=\E`0, cnorm=\E`1, 
+	kf1=^A@^M, kf2=^AA^M, kf3=^AB^M, kf4=^AC^M, kf5=^AD^M,
+	kf6=^AE^M, kf7=^AF^M, kf8=^AG^M, kf9=^AH^M, kf10=^AI^M,
+	kf11=^AJ^M, kf12=^AK^M, kf13=^AL^M, kf14=^AM^M, kf15=^AN^M,
+	kf16=^AO^M, kf17=^A`^M, kf18=^Aa^M, kf19=^Ab^M, kf20=^Ac^M,
+	kf21=^Ad^M, kf22=^Ae^M, kf23=^Af^M, kf24=^Ag^M, kf25=^Ah^M,
+	kf26=^Ai^M, kf27=^Aj^M, kf28=^Ak^M, kf29=^Al^M, kf30=^Am^M,
+	kf31=^An^M, kf32=^Ao^M,
+	kcuu1=^K, kcub1=^H, kcuf1=^L, kcud1=^J,
+	khome=^^, ka1=^^,
+	kb2=\EJ, kc1=\ET, kc3=\EK, kbs=^H,
+	kdch1=\EW, kend=\ET, 
+	kprt=\EP, kich1=\Eq,
+	knp=\EK, kpp=\EJ,
+	kDC=\ER, kHOM=\E{, kEND=\EY, kPRT=\E7,
+	kRIT=^L, kNXT=\EK, kPRV=\EJ,
+	smxon=\Ec21, rmxon=\Ec20,
+	mc0=\EP, mc4=^T, mc5=^R,
+	is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+	rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
+	cols#132,
+	cup=\Ea%i%p1%dR%p2%dC$<30>,
+	is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+	rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+	use=ncr260wy325pp,
+# This definition for Wyse 350 supports several attributes.  This means
+# that it has magic cookies (extra spaces where the attributes begin).
+# Some applications do not function well with magic cookies.  The System
+# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 
+# If supporting various attributes is not vital, 'xmc#1' and the extra
+# attributes can be removed. 
+# Mapping to ASCII character set ('acsc' capability) can also be 
+# restored if needed.
+# In addition, color capabilities have been added to this file.  The drawback,
+# however, is that the background color has to be black.  The foreground colors
+# are numbered 0 through 15.  
+#
+# NOTE:  The NCR Unix System Administrator's Shell does not function properly
+# 	    with the 'pairs' capability defined as below.  If you wish to
+#	    have it included, Un-comment it and recompile (using 'tic'). 
+#
+ncr260wy350pp|NCR 2900_260 wyse 350,
+	am, bw, hs, mir, msgr, xon, km, mc5i, 
+	cols#80, lines#24, nlab#32,
+ 	xmc#1, 
+	.pairs#16,
+	colors#16, ncv#33,
+	setb=\s,
+	setf=%?%p1%{0}%=%t%'1'
+		%e%p1%{1}%=%t%'2'
+		%e%p1%{2}%=%t%'3'
+		%e%p1%{3}%=%t%'4'
+		%e%p1%{4}%=%t%'5'
+		%e%p1%{5}%=%t%'6'
+		%e%p1%{6}%=%t%'7'
+		%e%p1%{7}%=%t%'f'
+		%e%p1%{8}%=%t%'a'
+		%e%p1%{9}%=%t%'b'
+		%e%p1%{10}%=%t%'c'
+		%e%p1%{11}%=%t%'e'
+		%e%p1%{12}%=%t%'j'
+		%e%p1%{13}%=%t%'n'
+		%e%p1%{14}%=%t%'o'
+		%e%p1%{15}%=%t%'8'%;\Em0%c$<100>,
+	kcbt=\EI, cbt=\EI, 
+	cud1=^J$<5>, cub1=^H$<5>, cuf1=^L$<5>, cuu1=^K$<5>,
+	home=^^$<10>, cr=^M,
+	acsc=a?h;07j5k3l2m1n8q:t4u9v=w0x6,
+	cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c$<40>,
+	mrcup=\Ew@%p1%{48}%+%c%p2%'\s'%+%c%p3%'\s'%+%c$<20>,
+	ind=^J$<5>, ri=\Ej$<5>, nel=^_$<5>, tsl=\EF, fsl=^M, dsl=\E`c,
+	il1=\EE$<5>, clear=\E+$<20>,
+	ed=\Ey$<5>, el=\Et$<5>,
+	dl1=\ER$<5>, dch1=\EW$<50>,
+	smir=\Eq, rmir=\Er,
+	smam=\Ed/, rmam=\Ed., 
+	hts=\E1, tbc=\E0, ht=^I,
+	smso=\EGt, rmso=\EG0,
+	smul=\EG8, rmul=\EG0,
+	rev=\EG4, blink=\EG2, invis=\EG1, dim=\EGp,
+	smacs=\EH^B\EcB1, rmacs=\EH^C\EcB0,
+	sgr0=\EG0\EH^C\EcD,
+	bel=^G,
+	cvvis=\E`5, civis=\E`0, cnorm=\E`1, 
+	kf1=^A@^M, kf2=^AA^M, kf3=^AB^M, kf4=^AC^M, kf5=^AD^M, kf6=^AE^M,
+	kf7=^AF^M, kf8=^AG^M, kf9=^AH^M, kf10=^AI^M, kf11=^AJ^M,
+	kf12=^AK^M, kf13=^AL^M, kf14=^AM^M, kf15=^AN^M, kf16=^AO^M,
+	kf17=^A`^M, kf18=^Aa^M, kf19=^Ab^M, kf20=^Ac^M, kf21=^Ad^M,
+	kf22=^Ae^M, kf23=^Af^M, kf24=^Ag^M, kf25=^Ah^M, kf26=^Ai^M,
+	kf27=^Aj^M, kf28=^Ak^M, kf29=^Al^M, kf30=^Am^M, 
+	kf31=^An^M, kf32=^Ao^M, 
+	kcuu1=^K, kcub1=^H, kcuf1=^L, kcud1=^J, khome=^^, ka1=^^,
+	kc1=\ET, kc3=\EK, kbs=^H, kdch1=\EW, kend=\ET, kprt=\EP,
+	kich1=\Eq, knp=\EK, kpp=\EJ, kEND=\EY, kDC=\ER,
+	kHOM=\E{, kPRT=\E7, kRIT=^L,
+	smxon=\Ec21, rmxon=\Ec20,
+	mc0=\EP$<10>, mc4=^T, mc5=^R,
+	is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+	rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
+	cols#132,
+	cup=\Ea%i%p1%dR%p2%dC$<30>,
+	is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
+	rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
+	use=ncr260wy350pp,
+# This definition for Wyse 50+ supports several attributes.  This means
+# that it has magic cookies (extra spaces where the attributes begin).
+# Some applications do not function well with magic cookies.  The System
+# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 
+# If supporting various attributes is not vital, 'xmc#1' and the extra
+# attributes can be removed. 
+# Mapping to ASCII character set ('acsc' capability) can also be 
+# restored if needed.
+# (ncr260wy50+pp: originally contained commented-out 
+# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
+ncr260wy50+pp|NCR 2900_260 wyse 50+,
+	am, bw, hs, mir, xon, km, mc5i, msgr,
+	cols#80, lines#24, nlab#32, 
+	xmc#1,
+  	acsc=0wa_h[jukslrmqnxqzttuyv]wpxv,
+	smacs=\EH^B, rmacs=\EH^C,
+ 	sgr0=\EG0\EH^C$<15>,
+	cud1=^J$<5>, cub1=^H$<5>, cuf1=^L$<5>, cuu1=^K$<5>,
+	home=^^$<10>, cr=^M,
+	cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c$<30>,
+	mrcup=\Ew@%p1%{48}%+%c%p2%'\s'%+%c%p3%'\s'%+%c$<10>,
+	ind=^J$<5>, ri=\Ej$<5>, nel=^_$<5>, 
+	tsl=\EF, fsl=^M, dsl=\E`c,
+	il1=\EE$<5>, clear=\E+$<20>,
+	ed=\EY$<5>, el=\ET$<5>,
+	dl1=\ER$<5>, dch1=\EW$<50>,
+	smir=\Eq, rmir=\Er,
+	smam=\Ed/, rmam=\Ed., 
+	hts=\E1$<5>, tbc=\E0$<5>, ht=^I$<5>,
+	kcbt=\EI, cbt=\EI$<5>, 
+	smso=\EGt, rmso=\EG0,
+	smul=\EG8, rmul=\EG0,
+ 	rev=\EG4, blink=\EG2, invis=\EG1, dim=\EGp,
+	bel=^G,
+	cvvis=\E`5, civis=\E`0, cnorm=\E`1, 
+	kf1=^A@^M, kf2=^AA^M, kf3=^AB^M, kf4=^AC^M, kf5=^AD^M, kf6=^AE^M,
+	kf7=^AF^M, kf8=^AG^M, kf9=^AH^M, kf10=^AI^M, kf11=^AJ^M,
+	kf12=^AK^M, kf13=^AL^M, kf14=^AM^M, kf15=^AN^M, kf16=^AO^M,
+	kf17=^A`^M, kf18=^Aa^M, kf19=^Ab^M, kf20=^Ac^M, kf21=^Ad^M,
+	kf22=^Ae^M, kf23=^Af^M, kf24=^Ag^M, kf25=^Ah^M, kf26=^Ai^M,
+	kf27=^Aj^M, kf28=^Ak^M, kf29=^Al^M, kf30=^Am^M, 
+	kf31=^An^M, kf32=^Ao^M, 
+	kcuu1=^K, kcub1=^H, kcuf1=^L, kcud1=^J, 
+	ka1=^^, kc1=\ET, kc3=\EK, 
+	kbs=^H, kdch1=\EW, kend=\ET, kprt=\EP, khome=^^,
+	kich1=\Eq, knp=\EK, kpp=\EJ, kEND=\EY, kDC=\ER,
+	kHOM=\E{, kPRT=\E7, kRIT=^L,
+	smxon=\Ec21, rmxon=\Ec20,
+	mc0=\EP$<10>, mc4=^T, mc5=^R,
+	is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+	rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
+	cols#132,
+	cup=\Ea%i%p1%dR%p2%dC$<30>,
+	is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
+	rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
+	use=ncr260wy50+pp,
+ncr260wy60pp|NCR 2900_260 wyse 60,
+	am, bw, hs, mir, msgr, xon, km, mc5i, 
+	cols#80, lines#24, nlab#32,
+	bel=^G, cbt=\EI$<15>,
+	cud1=^J$<5>, cub1=^H$<5>, cuf1=^L$<5>, cuu1=^K$<5>,
+	home=^^$<25>, cr=^M,  
+	acsc=a?h;07j5k3l2m1n8q:t4u9v=w0x6,
+	cup=\E=%p1%'\s'%+%c%p2%'\s'%+%c$<10>,
+	mrcup=\Ew@%p1%{48}%+%c%p2%'\s'%+%c%p3%'\s'%+%c$<30>,
+	ind=^J$<5>, ri=\Ej$<5>, nel=^_$<5>,
+	tsl=\EF, fsl=^M, dsl=\E`c,
+	il1=\EE$<5>, clear=\E*$<100>,
+	ed=\Ey$<5>, el=\Et$<5>,
+	dl1=\ER$<5>, dch1=\EW$<50>,
+	smir=\Eq, rmir=\Er,
+	smam=\Ed/, rmam=\Ed., 
+	hts=\E1$<15>, tbc=\E0$<15>, kcbt=\EI$<15>, ht=^I$<15>,
+	smso=\EGt, rmso=\EG0,
+	smul=\EG8, rmul=\EG0,
+	rev=\EG4, blink=\EG2, invis=\EG1,
+	smacs=\EH^B, rmacs=\EH^C,
+# 	enacs=\EcD,
+	sgr0=\EG0\EcB0\EcD$<15>,
+	cvvis=\E`5, civis=\E`0, cnorm=\E`1, 
+	kf1=^A@^M, kf2=^AA^M, kf3=^AB^M, kf4=^AC^M, kf5=^AD^M,
+	kf6=^AE^M, kf7=^AF^M, kf8=^AG^M, kf9=^AH^M, kf10=^AI^M,
+	kf11=^AJ^M, kf12=^AK^M, kf13=^AL^M, kf14=^AM^M, kf15=^AN^M,
+	kf16=^AO^M, kf17=^A`^M, kf18=^Aa^M, kf19=^Ab^M, kf20=^Ac^M,
+	kf21=^Ad^M, kf22=^Ae^M, kf23=^Af^M, kf24=^Ag^M, kf25=^Ah^M,
+	kf26=^Ai^M, kf27=^Aj^M, kf28=^Ak^M, kf29=^Al^M, kf30=^Am^M,
+	kf31=^An^M, kf32=^Ao^M,
+	kcuu1=^K, kcub1=^H, kcuf1=^L, kcud1=^J,
+	khome=^^, ka1=^^,
+	kb2=\EJ, kc1=\ET, kc3=\EK, kbs=^H,
+	kdch1=\EW, kend=\ET, 
+	kprt=\EP, kich1=\Eq,
+	knp=\EK, kpp=\EJ,
+	kDC=\ER, kHOM=\E{, kEND=\EY, kPRT=\E7,
+	kRIT=^L, kNXT=\EK, kPRV=\EJ,
+	smxon=\Ec21, rmxon=\Ec20,
+	mc0=\EP, mc4=^T, mc5=^R,
+	is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+	rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
+	cols#132,
+	cup=\Ea%i%p1%dR%p2%dC$<30>,
+	is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+	rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
+	use=ncr260wy60pp,
+ncr160vppp|NCR 2900_160 viewpoint,
+	use=ncr260vppp,
+ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
+	use=ncr260vpwpp,
+ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
+	use=ncr260vt100an,
+ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
+	use=ncr260vt100pp,
+ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd, 
+	use=ncr260vt100wan,
+ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+  kybd, 
+	use=ncr260vt100wpp,
+ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
+	use=ncr260vt200an,
+ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
+	use=ncr260vt200pp,
+ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd, 
+	use=ncr260vt200wan,
+ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+  kybd, 
+	use=ncr260vt200wpp,
+ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
+	use=ncr260vt300an,
+ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
+	use=ncr260vt300pp,
+ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd, 
+	use=ncr260vt300wan,
+ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+  kybd, 
+	use=ncr260vt300wpp,
+ncr160wy50+pp|NCR 2900_160 wyse 50+,
+	use=ncr260wy50+pp,
+ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
+	use=ncr260wy50+wpp,
+ncr160wy60pp|NCR 2900_160 wyse 60,
+	use=ncr260wy60pp,
+ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
+	use=ncr260wy60wpp,
+ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal, 
+	am, hs, mir, msgr, xon, nlab#32, mc5i,
+	lines#24, cols#80, it#8,
+	cuu1=\E[A$<2>, cud1=\E[B$<2>, cub1=\E[D$<2>, cuf1=\E[C$<2>, 
+	home=\E[H$<2>$<80>, cr=^M,
+	cuu=\E[%p1%dA$<30>, cud=\E[%p1%dB$<30>, cub=\E[%p1%dD$<30>, 
+	cuf=\E[%p1%dC$<30>, 
+	cup=\E[%i%p1%d;%p2%dH$<100>, sc=\E7, rc=\E8,
+	ind=\ED, ri=\EM$<50>, 
+ 	csr=\E[%i%p1%d;%p2%dr$<100>, nel=\EE, tsl=\E[>+1$<70>, fsl=1$<10>,
+	dsl=\E[31l$<25>, il1=\E[B\E[L$<80>, il=\E[%p1%dL$<80>, 
+	clear=\E[2J\E[1;1H$<300>, ed=\E[0J$<300>, el=\E[0K$<30>,
+	el1=\E[1K$<30>, dl1=\E[M$<40>, dl=\E[%p1%dM$<70>, 
+	dch1=\E[1P$<10>, dch=\E[%p1%dP$<40>,
+	smir=\E[4h$<80>, rmir=\E[4l$<80>, bel=^G,
+	hts=\EH, tbc=\E[3g$<40>, ht=^I, smso=\E[7m$<30>, rmso=\E[0m$<30>, 
+	smul=\E[4m$<30>, rmul=\E[0m$<30>, rev=\E[7m$<30>, 
+	blink=\E[5m$<30>, bold=\E[1m$<30>,
+	smacs=^N$<90>, rmacs=^O$<90>, enacs=\E(B\E)0$<40>, sgr0=^O\E[0m$<120>,
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;$<100>,
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,  
+	kcuu1=\E[A, kcub1=\E[D, kcuf1=\E[C, kcud1=\E[B, ka1=\E[H, 
+	kbs=^H, kent=^M, kLFT=\E[D, kRIT=\E[C, mc0=\E[i$<100>,   
+	acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
+	rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P^Y$<200>,
+	is2=\E[12h\E[?10l\E%/0n\E[P^Y\E[?3l\E(B\E)0$<200>,
+ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
+	cols#132,
+	rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P^Y$<200>,
+	is2=\E[12h\E[?10l\E%/0n\E[P^Y\E[?3h\E(B\E)0$<200>,
+	use=ncrvt100an,
+#
+# Vendor-supplied NCR termcaps end here
+
+# NCR7900 DIP switches:
+#
+# Switch A:
+# 1-4 - Baud Rate
+# 5   - Parity (Odd/Even)
+# 6   - Don't Send or Do Send Spaces
+# 7   - Parity Enable
+# 8   - Stop Bits (One/Two)
+# 
+# Switch B:
+# 1   - Upper/Lower Shift
+# 2   - Typewriter Shift
+# 3   - Half Duplex / Full Duplex
+# 4   - Light/Dark Background
+# 5-6 - Carriage Return Without / With Line Feed
+# 7   - Extended Mode
+# 8   - Suppress Keyboard Display
+# 
+# Switch C:
+# 1   - End of line entry disabled/enabled
+# 2   - Conversational mode / (Local?) Mode
+# 3   - Control characters displayed / not displayed
+# 4   - (2-wire?) / 4-wire communications
+# 5   - RTS on and off for each character
+# 6   - (50Hz?) / 60 Hz
+# 7   - Exit after level zero diagnostics
+# 8   - RS-232 interface
+# 
+# Switch D:
+# 1   - Reverse Channel (yes / no)
+# 2   - Manual answer (no / yes)
+# 3-4 - Cursor appearance
+# 5   - Communication Rate
+# 6   - Enable / Disable EXT turnoff
+# 7   - Enable / Disable CR turnoff
+# 8   - Enable / Disable backspace
+#
+# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
+ncr7900i|ncr7900|ncr 7900 model 1,
+	am, bw, ul,
+	cols#80, lines#24, xmc#1,
+	bel=^G, blink=\E0B, clear=\f, cr=\r, cub1=\b, cud1=\n,
+	cuf1=^F, cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek,
+	el=\EK, ind=\n, is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=\n,
+	kcuf1=^F, kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R,
+	rev=\E0P, rmso=\E0@, rmul=\E0@,
+ 	sgr=\E0%p5%'@'%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
+ 	sgr0=\E0@, smso=\E0Q, smul=\E0`,
+ncr7900iv|ncr 7900 model 4,
+	am, bw, hs, eslok,
+	cols#80, lines#24,
+	bel=^G,	cr=\r, clear=\f,
+	cup=^K%p1%'@'%+%c\E^E%p2%02d, cud1=\n, home=^K@\E^E00,
+	cub1=\b, dl1=\E^O, dsl=\Ey1,
+	fsl=\Ek\Ey5, il1=\E^N, kbs=\b,
+	kcud1=\EB, kf1=\ES, kf2=\ET,
+	kf3=\EU, kf4=\EV, kf5=\EW,
+	kf6=\EP, kf7=\EQ, kf8=\ER,
+	khome=\EH, kcub1=\ED, kcuf1=\EC,
+	kcuu1=\EA, lf6=blue, lf7=red,
+	lf8=white, nel=\r\n, ind=\n,
+	tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
+	ind=^J,
+ncr7901|ncr 7901 model,
+	cols#80, lines#24,
+	am, bel=^G, bw, clear=^L, cr=^M,
+	cub1=^H, cud1=^J, cuf1=^F, cuu1=^Z,
+	ind=^J, ll=^A,
+	ed=\Ek, el=\EK,
+	civis=^W, cnorm=^X,
+	mc4=^T, mc5=^R,
+	kcud1=^J, kcub1=^U, kcuf1=^F, kcuu1=^Z, khome=^H, kclr=^L,
+	is2=^X,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+	vpa=^K%p1%'@'%+%c,
+	hpa=^P%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
+	sgr=\E0%p5%'@'%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c^N,
+	is2=\E4^O,
+	blink=\E0B, dim=\E0A, rev=\E0P,
+	smso=\E0Q^N, rmso=^O,
+	smul=\E0`^N, rmul=^O, sgr0=^O, ul,
+
+#### Perkin-Elmer (Owl)
+#
+# These are official terminfo entries from within Perkin-Elmer.
+#
+
+bantam|pe550|pe6100|perkin elmer 550,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, cols#80, el=\EI$<20>, OTbs,
+	clear=\EK$<20>, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, home=\EH,
+	lines#24, ll=\EH\EA, cuf1=\EC, cuu1=\EA,
+fox|pe1100|perkin elmer 1100,
+	tbc=\E3, hts=\E1, cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H, OTbs,
+	ed=\EJ$<5.5*>, el=\EI, clear=\EH\EJ$<132>, cols#80, home=\EH, lines#24,
+	ll=\EH\EA, cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c,
+	cuu1=\EA, flash=^P^B$<200/>^P^C,
+owl|pe1200|perkin elmer 1200,
+	tbc=\E3, hts=\E1, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EL$<5.5*>, OTbs,
+	am, cub1=^H, ed=\EJ$<5.5*>, el=\EI$<5.5>, clear=\EH\EJ$<132>, home=\EH,
+	ll=\EH\EA, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cols#80, dch1=\EO$<5.5*>,
+	dl1=\EM$<5.5*>, ich1=\EN, ip=$<5.5*>, kbs=^h, in, lines#24,
+	cuf1=\EC, cuu1=\EA, rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, flash=^P^B$<200/>^P^C,
+	kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, kf5=\ERE, kf6=\ERF,
+	kf7=\ERG, kf8=\ERH, kf9=\ERI, kf0=\ERJ,
+pe1251|pe6300|pe6312|perkin elmer 1251,
+	am, cols#80, it#8, lines#24, xmc#1, pb#300, vt#8,
+	bel=^G, cr=^M, clear=\EK$<332>, el=\EI$<10*>, ed=\EJ$<20*>,
+	cud1=\EB, home=\EH, cub1=\ED, cuf1=\EC, cuu1=\EA, 
+	cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, ind=^J, hts=\E1, kf0=\ERA,
+	kf1=\ERB, kf2=\ERC, kf3=\ERD, kf4=\ERE, kf5=\ERF, kf6=\ERG,
+	kf7=\ERH, kf8=\ERI, kf9=\ERJ, kf10=\ERK, tbc=\E3,
+# (pe7000m: this had
+# 	rmul=\E!\0, smul=\E!\040, 
+# which is probably wrong, it collides with kf0
+pe7000m|perkin elmer 7000 series monochrome monitor,
+	am,	cols#80,    lines#24,
+	bel=^G, cr=^M,	clear=\EK, el=\EI,   ed=\EJ,
+	cud1=\EB,  home=\EH, cub1=\ED, cuf1=\EC, cuu1=\EA,
+	cup=\ES%p1%{32}%+%c%p2%{32}%+%c,ind=^J,
+	is1=\E!\0\EW  7o\Egf\ES7 ,
+	cbt=\E!Y,
+	kf0=\E!\0, kf1=\E!\001, kf2=\E!\002, kf3=\E!\003,
+	kf4=\E!\004, kf5=\E!\005, kf6=\E!\006, kf7=\E!\007,
+	kf8=\E!\010, kf9=\E!\011, kf10=\E!\012,
+	kbs=^H, kcud1=\E!U, khome=\E!S, kcub1=\E!V, kcuf1=\E!W,
+	kcuu1=\E!T, ll=\ES7 , ri=\ER, 
+pe7000c|perkin elmer 7000 series colour monitor, 
+	is1=\E!\0\EW  7o\Egf\Eb0\Ec7\ES7\s, 
+	rmso=\Eb0, rmul=\E!\0, smso=\Eb2, smul=\E!\040,
+	use=pe7000m,
+
+#### Prime
+#
+# Yes, Prime made terminals.  These entries were posted by Kevin J. Cummings
+# <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
+# Prime merged with ComputerVision in the late 1980s; you can reach them at:
+#
+#	ComputerVision Services
+#	500 Old Connecticut Path
+#	Framingham, Mass.
+#
+
+# Standout mode is dim reverse-video.
+pt100|pt200|wren|fenix|prime pt100/pt200, 
+	am, bw, mir, msgr, 
+	cols#80, it#8, lines#24, 
+	cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, 
+	cub1=\010, cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, 
+	cuf1=\E[C, cup=\E0%p1%'!'%+%c%p2%'!'%+%c, 
+	cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, 
+	dim=\E[2m, dl=\E[M, ed=\E[J\E[r, el=\E[K\E[t, 
+	flash=\E$$<200/>\E$P, 
+	home=\E$B, ht=\011, il1=\E[L\E[t, ind=\012, 
+	kbs=\010, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
+	kcuu1=\E[A, khome=\E$A, nel=\r\012, rmcup=, rmir=\E[4l, 
+	rmkx=\E[>13l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
+	smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q, 
+	smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m, 
+pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode, 
+	cols#132, 
+	cup=\E[%i%p1%d;%p2%dH, use=pt100,
+pt250|Prime PT250, 
+	smso@, rmso@, use=pt100,
+pt250w|Prime PT250 in 132-column mode, 
+	smso@, rmso@, use=pt100w,
+
+#### Sperry Univac
+#
+# Sperry Univac has merged with Burroughs to form Unisys.
+#
+
+# This entry is for the Sperry UTS30 terminal running the TTY 
+# utility under control of CP/M Plus 1R1. The functionality 
+# provided is comparable to the DEC vt100.
+# (uts30: I added <rmam>/<smam> based on the init string -- esr)
+uts30|sperry uts30 with cp/m@1R1,
+	am, bw, hs,
+	cols#80, lines#24, wsl#40,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=\f, cnorm=\ES,
+	cr=\r, csr=\EU%p1%{32}%+%c%p2%{32}%+%c, cub=\E[%p1%dD, cub1=\b,
+	cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP,
+	dch1=\EM, dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=\r,
+	home=\E[H, ht=\t, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
+	kbs=\b, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
+	ind=\l, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, rc=\EX, rev=\E[7m,
+	rf=/usr/share/tabset/vt100, ri=\EI, rin=\E[%p1%dA, rmacs=\Ed,
+	rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\EW, sgr0=\E[m,
+	smacs=\EF, smam=\E[?7m, smso=\E[7m, smul=\E[4m, tsl=\E], uc=\EPB,
+
+#### Tandem
+#
+# Tandem builds these things for use with its line of fault-tolerant
+# transaction-processing computers.  They aren't generally available
+# on the merchant market, and so are fairly uncommon.
+#
+
+tandem6510|adm3a repackaged by Tandem, 
+	use=adm3a,
+
+# A funny series of terminal that TANDEM uses.  The actual model numbers
+# have a fourth digit after 653 that designates minor variants.  These are
+# natively block-mode and rather ugly, but they have a character mode which
+# this doubtless(?) exploits.  There is a 6520 that is slightly dumber.
+# (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
+# removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
+tandem653|t653x|Tandem 653x multipage terminal, 
+	am, da, db, hs, OTbs,
+	cols#80, lines#24, wsl#64, xmc#1, 
+	clear=\EI, cub1=^H, cud1=^J, cuf1=\EC, 
+	cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 
+	dsl=\Eo\r, ed=\EJ, el=\EK, fsl=^M, home=\EH, 
+	ind=\ES, ri=\ET, 
+	rmso=\E6\s, rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, 
+	tsl=\Eo, 
+
+#### Tandy/Radio Shack
+#
+# Tandy has a line of VDTs distinct from its microcomputers.
+#
+
+dmterm|deskmate terminal, 
+	am, bw, 
+	cols#80, lines#24, 
+	bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, 
+	cub1=^H, cud1=\EB, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 
+	dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I, 
+	ich1=\EQ, il1=\EP, ind=\EX, kcub1=\ED, kcud1=\EB, 
+	kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, 
+	kf3=\E4, kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, 
+	kf8=\E9, kf9=\E0, khome=\EH, lf0=f1, lf1=f2, 
+	lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, 
+	lf8=f9, lf9=f10, ll=\EE, 
+	invis@, smul@, rmul@, use=adm+sgr, 
+dt100|dt-100|Tandy DT-100 terminal, 
+	xon, 
+	cols#80, lines#24, xmc#1, 
+	acsc=kkllmmjjnnwwvvttuuqqxx, bel=^G, civis=\E[?25l, 
+	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 
+	csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, 
+	cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, 
+	dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 
+	ht=^I, ich1=\E[@, il1=\E[L, ind=^J, 
+	is2=\E[?3l\E)0\E(B, kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i, kf10=\E[?5i, 
+	kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~, 
+	kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, 
+	khome=\E[H, knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, 
+	lf3=f3, lf4=f4, lf5=f5, lf6=f6, lf7=f7, lf8=f8, 
+	ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smacs=^N, 
+	smso=\E[7m, smul=\E[4m, 
+dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
+	cols#132,
+	use=dt100, 
+dt110|Tandy DT-110 emulating ansi, 
+	xon, 
+	cols#80, lines#24, 
+	acsc=kkllmmjjnnwwvvuuttqqxx, bel=^G, civis=\E[?25l, 
+	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, 
+	cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, 
+	dch1=\E[0P, dl1=\E[0M, ed=\E[0J, el=\E[0K, 
+	enacs=\E(B\E)0, home=\E[H, ht=^I, ich1=\E[0@, 
+	il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D, 
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K, 
+	kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, 
+	kf4=\E[4~, kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, 
+	kf8=\E[8~, kf9=\E[9~, khome=\E[G, kich1=\E[@, 
+	knp=\E[26~, kpp=\E[25~, lf0=f1, lf1=f2, lf2=f3, 
+	lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9, 
+	lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, 
+	sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, 
+pt210|TRS-80 PT-210 printing terminal,
+	hc, os, 
+	cols#80, 
+	bel=^G, cr=^M, cud1=^J, ind=^J, 
+
+#### Tektronix (tek)
+#
+# Tektronix tubes are graphics terminals.  Most of them use modified 
+# oscilloscope technology incorporating a long-persistence green phosphor,
+# and support vector graphics on a main screen with an attached "dialogue
+# area" for interactive text.
+#
+
+tek|tek4012|tektronix 4012,
+	OTbs, cr=^M, cud1=^J, bel=^G, ff=^L$<1000>,
+	is2=\E^O, cub1=^H, clear=\E^L$<1000>, cols#75, lines#35, os,
+# (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
+tek4013|tektronix 4013,
+	acsc=, smacs=\E^N, rmacs=\E^O, use=tek4012,
+tek4014|tektronix 4014,
+	is2=\E^O\E9, cols#81, lines#38, use=tek4012,
+# (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
+tek4015|tektronix 4015,
+	acsc=, smacs=\E^N, rmacs=\E^O, use=tek4014,
+tek4014-sm|tektronix 4014 in small font,
+	is2=\E^O\E\072, cols#121, lines#58, use=tek4014,
+# (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
+tek4015-sm|tektronix 4015 in small font,
+	acsc=, smacs=\E^N, rmacs=\E^O, use=tek4014-sm,
+# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
+#
+# You need to have "stty nl2" in effect.  Some versions of tset(1) know
+# how to set it for you.
+#
+# It's got the Magic Cookie problem around stand-out mode.  If you can't
+# live with Magic Cookie, remove the :so: and :se: fields and do without
+# reverse video.  If you like reverse video stand-out mode but don't want
+# it to flash, change the letter 'H' to 'P' in the :so: field.
+tek4023|tektronix 4023,
+	OTbs, am,
+	OTdN#4, cols#80, lines#24, vt#4, xmc#1,
+	OTnl=^J, cr=^M, cud1=^J, bel=^G, kbs=^H, smso=^_P, rmso=^_@,
+	cup=\034%p2%{32}%+%c%p1%{32}%+%c, cuf1=\t, cub1=^H,
+	clear=\E^L$<4/>, 
+# It is recommended that you run the 4025 at 4800 baud or less;
+# various bugs in the terminal appear at 9600.  It wedges at the
+# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
+# on keyboard don't work.  You have to hit BREAK twice to get
+# one break at any speed - this is a documented feature.
+# Can't use cursor motion because it's memory relative, and 
+# because it only works in the workspace, not the monitor.  
+# Same for home. Likewise, standout only works in the workspace.
+# 
+# <el> was commented out since vi and rogue seem to work better 
+# simulating it with lots of spaces!
+# 
+# <il1> and <il> had 145ms of padding, but that slowed down vi's ^U 
+# and didn't seem necessary.
+#
+tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
+	OTbs, cr=^M, ind=^F^J, cud1=^F^J, bel=^G, am, da, db, ht=^I, it#8,
+	cub1=^H, lm#0, lines#34, cols#80, clear=^_era\r\n\n,
+	is2=\41com 31\r\n^_sto 9 17 25 33 41 49 57 65 73\r,
+	smkx=^_lea p4 /h/\r^_lea p8 /k/\r^_lea p6 / /\r^_lea p2 /j/\r^_lea f5 /H/\r,
+	rmkx=^_lea p2\r^_lea p4\r^_lea p6\r^_lea p8\r^_lea f5\r,
+	cuu1=^K, cuf1=^_rig\r,
+	ed=^_dli 50\r, cmdch=^_,
+	dch1=^_dch\r, ich1=^_ich\r ^H,
+	il1=^_up\r^_ili\r, dl1=^_dli\r^F,
+	il=^_up\r^_ili %p1%d\r, dl=^_dli %p1%d\r^F,
+	cuu=^_up %p1%d\r, cud=^_dow %p1%d\r,
+	cub=^_lef %p1%d\r, cuf=^_rig %p1%d\r,
+tek4025-17|tek 4025 17 line window,
+	lines#17, use=tek4025,
+tek4025-17-ws|tek 4025 17 line window in workspace,
+	is2=\41com 31\r\n^_sto 9 17 25 33 41 49 57 65 73\r^_wor 17\r^_mon 17\r,
+	smcup=^_wor h\r, rmcup=^_mon h\r, smso=^_att e\r, rmso=^_att s\r, use=tek4025-17,
+tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
+	smcup=\41com 31\r, rmcup=^_com 33\r,
+	is2=^_com 33\r\n\41sto 9 17 25 33 41 49 57 65 73\r, use=tek4025,
+# Tektronix 4025a
+# From: Doug Gwyn <gwyn@brl-smoke.ARPA>
+# The following status modes are assumed for normal operation (replace the
+# initial "!" by whatever the current command character is):
+#	!COM 29			# NOTE: changes command character to GS (^])
+#	^]DUP
+#	^]ECH R
+#	^]EOL
+#	^]RSS T
+#	^]SNO N
+#	^]STO 9 17 25 33 41 49 57 65 73
+# Other modes may be set according to communication requirements.
+# If the command character is inadvertently changed, termcap can't restore it.
+# Insert-character cannot be made to work on both top and bottom rows.
+# Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
+# There also seems to be a problem with vertical motion, perhaps involving
+# delete/insert-line, following a typed carriage return.  This terminal sucks.
+# Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
+# work any more. -- esr)
+tek4025a|Tektronix 4025A, 
+	OTbs, OTpt, am, bw, da, db, xon, 
+	cols#80, it#8, lines#34, 
+	OTrs=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;, 
+	bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, 
+	cmdch=^], cr=^M, cub=\035lef %p1%d;, cub1=^H, 
+	cud=\035dow %p1%d;, cud1=^J, cuf=\035rig %p1%d;, 
+	cuf1=\035rig;, cuu=\035up %p1%d;, cuu1=^K, 
+	dch=\035dch %p1%d;, dch1=\035dch;, 
+	dl=\035dli %p1%d;, dl1=\035dli;, el=\035dch 80;, 
+	hpa=\r\035rig %p1%d;, ht=^I, il1=\013\035ili;, 
+	ind=^J, indn=\035dow %p1%d;, tbc=\035sto;, 
+# From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
+# Here's the command file that I use to get rogue to work on the 4025.
+# It should work with any program using the old curses (e.g. it better
+# not try to scroll, or cursor addressing won't work.  Also, you can't
+# see the cursor.)
+# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
+tek4025-cr|tek 4025 for curses and rogue, 
+	am, OTbs,
+	cols#80, it#8, lines#33, 
+	clear=\037era;, cub1=^H, cud1=^F^J, ind=^F^J, 
+	cuf1=\037rig;, cup=\037jum%i%p1%d\054%p2%d;, 
+	cuu1=^K, ht=\t, 
+	is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r, 
+	rmcup=\037wor 0, smcup=\037wor 33h, 
+# next two lines commented out since curses only allows 128 chars, sigh.
+#	:ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
+#	:te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
+tek4025ex|4025ex|4027ex|tek 4025 w/!, 
+	is2=\037com 33\r\n!sto 9\05417\05425\05433\05441\05449\05457\05465\05473\r, 
+	rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
+tek4105|tektronix 4105,
+	am, acsc=, il1=\E[1L, ed=\E[J, el=\E[K, clear=\E[2J\E[H,
+	cup=\E[%i%p1%2d;%p2%2dH, OTbs,
+	cols#79, lines#29,
+	dch1=\E[1P, dl1=\E[1M,
+	home=\E[H, smir=\E[4h, rmir=\E[4l, mir,
+	cuf1=\E[1C, cud1=\E[1B, cuu1=\E[1A,
+	smacs=\E[1m, rmacs=\E[m, msgr,
+	rmso=\E[=0;<1m, smso=\E[=2;<3m,
+	ul, smul=\E[=5;<2m, rmul=\E[=0;<1m,
+	is1=\E%!1\E[m,
+	rev=\E[=1;<3m, bold=\E[=7;<4m, invis=\E[=6;<5, dim=\E[=1;<6m,
+	blink=\E[=3;<7m, sgr0=\E[=0;<1m,
+	rmcup=, smcup=\E%!1\E[?6l\E[2J, xenl, xt,
+	msgr, mir, kbs=^h, kcuu1=\E[1A, kcud1=\E[1B,
+	kcub1=\E[1D, kcuf1=\E[1C,
+	is2=\E%!1\E[?6141\E[m,
+	cbt=\E[Z, cr=^M, ri=\E[T, ind=\E[S, it#8,
+	tbc=\E[1g, ht=^I, bel=^G,
+
+# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
+tek4105-30|4015 emulating 30 line vt100,
+	am, mir, msgr, xenl, xon,
+	cols#80, it#8, lines#30, vt#3,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+	clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n,
+	cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+	cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+	cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>,
+	el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=\t,
+	hts=\EH, ind=\n, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=\b,
+	kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB,
+	kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP,
+	kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
+	kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
+	rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>,
+	rmso=\E[m$<2>, rmul=\E[m$<2>,
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t^N%e^O%;,
+	sgr0=\E[m^O$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
+	smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+
+# Tektronix 4105 from BRL
+# The following setup modes are assumed for normal operation:
+#	CODE ansi		CRLF no			DABUFFER 141
+#	DAENABLE yes		DALINES 30		DAMODE replace
+#	DAVISIBILITY yes	ECHO no			EDITMARGINS 1 30
+#	FLAGGING input		INSERTREPLACE replace	LFCR no
+#	ORIGINMODE relative	PROMPTMODE no		SELECTCHARSET G0 B
+#	SELECTCHARSET G1 0	TABS -2
+# Other setup modes may be set for operator convenience or communication
+# requirements; I recommend
+#	ACURSOR 1 0		AUTOREPEAT yes		AUTOWRAP yes
+#	BYPASSCANCEL <LF>	CURSORKEYMODE no	DAINDEX 1 0 0
+#	EOFSTRING ''		EOLSTRING <CR>		EOMCHARS <CR> <NU>
+#	GAMODE overstrike	GCURSOR 0 100 0		GSPEED 10 1
+#	IGNOREDEL no		KEYEXCHAR <DL>		NVDEFINE -53 "<NU>"
+#	PROMPTSTRING ''		QUEUESIZE 2460		WINDOW 0 0 4095 3132
+#	XMTDELAY 0
+# and factory color maps.  After setting these modes, save them with NVSAVE. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# "IC" cannot be used in combination with "im" & "ei".
+# "tek4105a" is just a guess:
+tek4105a|Tektronix 4105, 
+	OTbs, OTpt, msgr, xon, 
+	OTkn#8, cols#80, it#8, lines#30, vt#3, 
+	OTrs=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>, 
+	acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 
+	civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, 
+	cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, 
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
+	ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 
+	il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1, 
+	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, 
+	kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, 
+	lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 
+	rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1, 
+	rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, sc=\E7, 
+	sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, 
+	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
+
+#
+# Tektronix 4106/4107/4109 from BRL
+# The following setup modes are assumed for normal operation:
+#	CODE ansi		COLUMNMODE 80		CRLF no
+#	DABUFFER 141		DAENABLE yes		DALINES 32
+#	DAMODE replace		DAVISIBILITY yes	ECHO no
+#	EDITMARGINS 1 32	FLAGGING input		INSERTREPLACE replace
+#	LFCR no			LOCKKEYBOARD no		ORIGINMODE relative
+#	PROMPTMODE no		SELECTCHARSET G0 B	SELECTCHARSET G1 0
+#	TABS -2
+# Other setup modes may be set for operator convenience or communication
+# requirements; I recommend
+#	ACURSOR 1 0		AUTOREPEAT yes		AUTOWRAP yes
+#	BYPASSCANCEL <LF>	CURSORKEYMODE no	DAINDEX 1 0 0
+#	EOFSTRING ''		EOLSTRING <CR>		EOMCHARS <CR> <NU>
+#	GAMODE overstrike	GCURSOR 0 100 0		GSPEED 9 3
+#	IGNOREDEL no		KEYEXCHAR <DL>		NVDEFINE -53 "<NU>"
+#	PROMPTSTRING ''		QUEUESIZE 2620		WINDOW 0 0 4095 3132
+#	XMTDELAY 0
+# and factory color maps.  After setting these modes, save them with NVSAVE.  No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# "IC" cannot be used in combination with "im" & "ei".
+tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109, 
+	msgr, xon, 
+	cols#80, it#8, lines#32, vt#3, 
+	acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 
+	civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, 
+	cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, 
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
+	ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 
+	il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1, 
+	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, 
+	kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, 
+	lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 
+	rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1, 
+	rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 
+	rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>, 
+	sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, 
+	smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g, 
+
+tek4107|tek4109|tektronix terminals 4107 4109,
+	am, mir, msgr, ul, xenl, xt, OTbs,
+	cvvis=\E%!3,
+	cnorm=\E%!0,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=\EJ, el=\EK,
+	clear=\ELZ, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cols#79, lines#29,
+	cuf1=\EC, ht=^I, it#8, ri=\EI, cuu1=\EA,
+	kcuu1=\EA, kcud1=\EB, kcuf1=\EC, kcub1=\ED, kbs=^H,
+	smso=\E%!1\E[7;5m$<2>\E%!0,
+	rmso=\E%!1\E[m$<2>\E%!0,
+	smul=\E%!1\E[4m$<2>\E%!0,
+	rmul=\E%!1\E[m$<2>\E%!0,
+	bold=\E%!1\E[1m$<2>\E%!0,
+	rev=\E%!1\E[7m$<2>\E%0,
+	blink=\E%!1\E[5m$<2>\E%!0,
+	dim=\E%!1\E[<0m$<2>\E%!0,
+	sgr0=\E%!1\E[m$<2>\E%!0,
+	sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m\E%%!0,
+# Tektronix 4207 with sysline.  In the ancestral termcap file this was 4107-s;
+# see the note attached to tek4207.
+tek4207-s|Tektronix 4207 with sysline but no memory, 
+	eslok, hs, 
+	dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8, 
+	is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, 
+	is2=\E7\E[?6l\E[2K\E[?6h\E8, 
+	tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
+
+# The 4110 series may be a wonderful graphics series, but they make the 4025
+# look good for screen editing.  In the dialog area, you can't move the cursor
+# off the bottom line.  Out of the dialog area, ^K moves it up, but there
+# is no way to scroll.
+# 
+# Note that there is a floppy for free from Tek that makes the 
+# 4112 emulate the vt52 (use the vt52 termcap). There is also
+# an expected enhancement that will use ANSI standard sequences.
+# 
+# 4112 in non-dialog area pretending to scroll. It really wraps 
+# but vi is said to work (more or less) in this mode.
+# 
+# 'vi' works reasonably well with this entry.
+#
+otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cuu1=^K, cub1=^H,
+	am, clear=\E^L, lines#34, cols#80,
+	smcup=\EKA0\ELV0\EMG0, rmcup=\EKA1\ELV1,
+# The 4112 with the ANSI compatibility enhancement
+tek4112|tek4114|tektronix 4110 series, 
+	am, db, OTbs,
+	cols#80, lines#34, 
+	cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, 
+	dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L, 
+	ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, 
+	ri=\E7\E[0;0H\E[L\E8, rmso=\E[m, rmul=\E[m, 
+	sgr0=\E[m, smso=\E[7m, smul=\E[4m, 
+tek4112-nd|4112 not in dialog area, 
+	OTns, 
+	cuu1=^K, use=tek4112,
+tek4112-5|4112 in 5 line dialog area, 
+	lines#5, 
+	use=tek4112,
+# (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
+# removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
+# Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
+# previously \0410 and \0411 sequences...I don't *think* they were supposed
+# to be 4-digit octal -- esr)
+tek4113|tektronix 4113 color graphics with 5 line dialog area, 
+	am, da, eo, OTbs,
+	cols#80, lines#5, 
+	clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0, 
+	flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0, 
+	is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0, 
+tek4113-34|tektronix 4113 color graphics with 34 line dialog area, 
+	lines#34, 
+	is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
+# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not 
+# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
+# :vb: needs enough delay to let you see the background color being toggled.
+tek4113-nd|tektronix 4113 color graphics with no dialog area, 
+	am, eo, OTbs,
+	cols#80, it#8, lines#34, 
+	clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K, 
+	cvvis=\ELZ\EKA0, ht=\t, 
+	flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0, 
+	home=\ELF7l\177 @, is2=\ELZ\EKA0\ELF7l\177 @, 
+	ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, 
+	uc=\010\EMG1_\EMG0, 
+# This entry is from Tek. Inc.  (Brian Biehl)
+# (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
+otek4115|Tektronix 4115, 
+	OTbs, am, da, db, eo, 
+	cols#80, it#8, lines#34, 
+	cbt=\E[Z, clear=\E[H\E[2J, 
+	cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, 
+	cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu1=\E[A, cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, 
+	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=\t, 
+	if=/usr/share/tabset/vt100, il1=\E[L, 
+	is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m, 
+	kbs=^H, ri=\EM, rmam=\E[?7l, rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, 
+	rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 
+	smcup=\E%!0\ELBB2\E%!1, smam=\E[?7h, smir=\E[4h, smkx=\E=, 
+	smso=\E[7m, smul=\E[4m, 
+tek4115|newer tektronix 4115 entry with more ANSI capabilities,
+	am, xon,
+	cols#80, lines#34,
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+	clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=\b,
+	cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+	dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+	home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=\t, hts=\EH,
+	ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
+	ind=\n, invis=\E[8m, kbs=\b, kcub1=\E[D, kcud1=\E[B,
+	kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
+	rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l, rmso=\E[m,
+	rmul=\E[m,
+	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
+	sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
+	vpa=\E[%p1%{1}%+%dd,
+# The tek4125 emulates a vt100 incorrectly - the scrolling region
+# command is ignored.  The following entry replaces <csr> with the needed
+# <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
+# chokes on; and adds a lot of initialization for the tek dialog area.
+# Note that this entry uses all 34 lines and sets the cursor color to green.
+# Steve Jacobson 8/85
+# (tek4125: there were two "\!"s in the is that I replaced with "\E!";
+# commented out, <smir>=\E1 because there's no <rmir>  -- esr)
+tek4125|tektronix 4125, 
+	lines#34, 
+	csr@, dl1=\E[1M, il1=\E[1L, 
+	is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 
+	rc@, sc@, .smir=\E1, smkx=\E=, use=vt100,
+
+# From: <jcoker@ucbic>
+# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
+# supplied another, less capable 4107 entry.  So we'll use that for 4107 and
+# note that if jcoker wasn't confused you may be able to use this one.
+# I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
+tek4207|Tektronix 4207 graphics terminal with memory, 
+	am, bw, mir, msgr, ul, xenl, 
+	cols#80, it#8, lines#32, 
+	blink=\E[5m, bold=\E[1m, cbt=\E[Z, 
+	clear=\E[H\E[J$<156/>, cub1=^H, cud1=^J, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P$<4/>, 
+	dl1=\E[M$<3/>, ed=\E[J, el=\E[K$<5/>, home=\E[H, 
+	ht=\t, ich1=\E[@$<4/>, il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
+	is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, 
+	kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, 
+	khome=\E[H, rev=\E[7m, ri=\E[T, 
+	rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, 
+	rmso=\E[m, rmul=\E[m, sgr0=\E[m, 
+	smcup=\E[?6l\E[H\E[J, smso=\E[7m, 
+	smul=\E[4m, tbc=\E[1g, 
+
+# From: <carolyn@dali.berkeley.edu>  Thu Oct 31 12:54:27 1985
+# (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
+# Tab had been given as \E2I,that must be the tab-set capability -- esr)
+tek4404|tektronix 4404, 
+	cols#80, it#8, lines#32, OTbs,
+	blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, 
+	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 
+	dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=\t, hts=\E[2I, 
+	il1=\E[1L, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
+	kcuu1=\E[A, rc=\E8, rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, 
+	rmir=\E[4l, rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, 
+	sc=\E7, sgr0=\E[m, smcup=\E%\E!1\E[1;32r\E[?6l\E>, 
+	smir=\E[4h, smkx=\E[?1l, smso=\E[7m, smul=\E[4m, 
+# Some unknown person wrote:
+# I added the is string - straight Unix has ESC ; in the login 
+# string which sets a ct8500 into monitor mode (aka 4025 snoopy 
+# mode). The is string here cleans up a few things (but not 
+# everything).
+ct8500|tektronix ct8500,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cr=^M, cud1=^J, ind=^J, bel=^G,
+	il1=\E^L, am, cub1=^H, cbt=\E^I, bw, ed=\E^U, el=\E^T,
+	clear=\E^E, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cols#80,
+	da, db, dch1=\E^],
+	dl1=\E^M, ich1=\E^\, lines#25, cuf1=\ES, ht=^I, ri=\E^A, rmso=\E ,
+	smso=\E$, rmul=\E , cuu1=\ER, smul=\E\041, is2=^_\EZ\Ek,
+	sgr0=\E\s,
+
+# Tektronix 4205 terminal.
+#
+# am is not defined because the wrap around occurs not when the char.
+# is placed in the 80'th column, but when we are attempting to type
+# the 81'st character on the line.  (esr: hmm, this is like the vt100
+# version of xenl, perhaps am + xenl would work!)
+#
+# Bold, dim, and standout are simulated by colors and thus not allowed
+# with colors.  The tektronix color table is mapped into the RGB color
+# table by setf/setb. All colors are reset to factory specifications by oc.
+# The <initc> cap uses RGB notation to define colors.  for arguments 1-3 the 
+# interval (0-1000) is broken into 8 smaller sub-intervals (125).  Each sub-
+# interval then maps into pre-defined value.
+tek4205|tektronix 4205,
+	.am, msgr, mir, ccc,
+	cols#80, lines#30, it#8, colors#8, pairs#63, ncv#49,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	il1=\E[1L, ed=\E[J, el=\E[K, clear=\E[2J\E[H, 
+	il=\E[%p1%dL,
+	cup=\E[%i%p1%d;%p2%dH,
+	dch1=\E[1P, dl1=\E[1M,
+	home=\E[H, smir=\E[4h, rmir=\E[4l, 
+	cuf1=\E[C, cud1=\E[B, cuu1=\E[A, cub1=\E[D,
+	cuf=\E[%p1%dC, cud=\E[%p1%dB, cuu=\E[%p1%dA, cub=\E[%p1%dD,
+	ech=\E%p1%dX, el1=\E[1K, ich=\E[%p1%d@, 
+	smacs=, rmacs=, enacs=\E)0,
+	rmso=\E[=0;<1m, smso=\E[=2;<3m,
+	smul=\E[4m, rmul=\E[24m,
+	is1=\E%!0\ETM1\E%!1\E[m,
+	rev=\E[7m, bold=\E[=7;<4m, invis=\E[=6;<5, dim=\E[=1;<6m,
+	blink=\E[5m, sgr0=\E[=0;<1m\E[24;25;27m,
+	rmcup=, smcup=\E%%!1\E[?6l\E[2J, 
+	kbs=^h, kcuu1=\E[A, kcud1=\E[B,
+	kcub1=\E[D, kcuf1=\E[C,
+	.is2=\E%%!1\E[?6141\E[m,
+	cbt=\E[Z, cr=^M, ind=\ED, ri=\EM,
+	tbc=\E[1g, ht=^I, bel=^G,
+	setf=\E[<%?%p1%{0}%=%t0m
+		 %e%p1%{1}%=%t4m
+		 %e%p1%{2}%=%t3m
+		 %e%p1%{3}%=%t5m
+		 %e%p1%{4}%=%t2m
+		 %e%p1%{5}%=%t6m
+		 %e%p1%{6}%=%t7m
+		 %e1m%;,
+	setb=\E[=%?%p1%{0}%=%t0m
+		 %e%p1%{1}%=%t4m
+		 %e%p1%{2}%=%t3m
+		 %e%p1%{3}%=%t5m
+		 %e%p1%{4}%=%t2m
+		 %e%p1%{5}%=%t6m
+		 %e%p1%{6}%=%t7m
+		 %e1m%;,
+	oc=\E%!0
+	      \ETFB0
+		0000
+		1F4F4F4
+		2F400
+		30F40
+		4A4C<F4
+		50F4F4
+		6F40F4
+		7F4F40
+	    \E%!1,
+	op=\E[39;40m,
+	initc=\E%%!0
+	      \ETF4
+	         %?%p1%{0}%=%t0
+		 %e%p1%{1}%=%t4
+		 %e%p1%{2}%=%t3
+		 %e%p1%{3}%=%t5
+		 %e%p1%{4}%=%t2
+		 %e%p1%{5}%=%t6
+		 %e%p1%{6}%=%t7
+		 %e1%;
+		  %?%p2%{125}%<%t0
+		  %e%p2%{250}%<%tA2
+		  %e%p2%{375}%<%tA?
+		  %e%p2%{500}%<%tC8
+		  %e%p2%{625}%<%tD4
+		  %e%p2%{750}%<%tE1
+		  %e%p2%{875}%<%tE:
+		  %eF4%;
+		  %?%p3%{125}%<%t0
+		  %e%p3%{250}%<%tA2
+		  %e%p3%{375}%<%tA?
+		  %e%p3%{500}%<%tC8
+		  %e%p3%{625}%<%tD4
+		  %e%p3%{750}%<%tE1
+		  %e%p3%{875}%<%tE:
+		  %eF4%;
+		  %?%p4%{125}%<%t0
+		  %e%p4%{250}%<%tA2
+		  %e%p4%{375}%<%tA?
+		  %e%p4%{500}%<%tC8
+		  %e%p4%{625}%<%tD4
+		  %e%p4%{750}%<%tE1
+		  %e%p4%{875}%<%tE:
+		  %eF4%;
+	      \E%%!1,
+	kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD,
+	kf4=\EP, kf5=\EQ, kf6=\ER, kf7=\ES,
+
+#### Teletype (tty)
+#
+# These are the hardcopy Teletypes from before AT&T bought the company,
+# clattering electromechanical dinosaurs in Bakelite cases that printed on
+# pulpy yellow roll paper.  If you remember these you go back a ways.
+# Teletype-branded VDTs are listed in the AT&T section.
+#
+# The earliest UNIXes were designed to use these clunkers; nroff and a few
+# other programs still default to emitting codes for the Model 37.
+#
+
+tty33|tty35|model 33 or 35 teletype, 
+	hc, os, xon, 
+	cols#72, 
+	bel=^G, cr=^M, cud1=^J, ind=^J, 
+tty37|model 37 teletype, 
+	hc, os, xon, OTbs,
+	bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8, ind=^J, 
+
+# There are known to be at least three flavors of the tty40, all seem more
+# like IBM half duplex forms fillers than ASCII terminals.  They have lots of
+# awful braindamage, such as printing a visible newline indicator after each
+# newline.  The 40-1 is a half duplex terminal and is hopeless.  The 40-2 is
+# braindamaged but has hope and is described here.  The 40-4 is a 3270
+# lookalike and beyond hope.  The terminal has visible bell but I don't know
+# it - it's null here to prevent it from showing the BL character.
+# There is an \EG in <nl> because of a bug in old vi (if stty says you have
+# a "newline" style terminal (-crmode) vi figures all it needs is nl
+# to get crlf, even if <cr> is not ^M.)
+# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
+tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
+	OTbs,
+	clear=\EH$<20>\EJ$<80>, ed=\EJ$<75>, il1=\EL$<50>, dl1=\EM$<50>,
+	dch1=\EP$<50>, ich1=\E\^$<50>, cuf1=\EC, cuu1=\E7, cub1=^H, cr=\EG,
+	ind=\ES$<20>, cud1=\EB, cols#80, lines#24, smso=\E3, rmso=\E4,
+	xon, kbs=\035, kcub1=^H, rs2=^S\ER$<60>, hts=\E1, home=\EH$<10>,
+	ri=\ET$<10>, tbc=\EH\E2$<80>, mc5=^R$<2000>, mc4=^T, ht=\E@$<10>,
+tty43|model 43 teletype, 
+	OTbs, am, hc, os, xon, 
+	cols#132, 
+	bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H, 
+
+#### Tymshare
+#
+
+# You can add <is2=\E<> to put this 40-column mode, though I can't
+# for the life of me think why anyone would want to.
+scanset|sc410|sc415|Tymshare Scan Set,
+	msgr, am, bw,
+	cols#80, lines#24,
+	bel=^G, cub1=^H, cud1=^J, ind=^J, cuu1=^K, cr=^M, cuf1=^I,
+	sc=^B, rc=^C, clear=\EH\EJ,
+	kcuu1=\EA, kcud1=\EB, kcuf1=\EC, kcub1=\ED,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+	ed=\EJ, el=\EK, home=\EH,
+	rs1=\E>,
+	smacs=^N, rmacs=^O, acsc=l<m-k4j%q\,x5,
+	mc0=\E;3, mc4=\E;0, mc5=\E;0,
+
+#### Volker-Craig (vc)
+#
+# If you saw a Byte Magazine cover with a terminal on it during the early
+# 1980s, it was probably one of these.  Carl Helmers liked them because
+# they could crank 19.2 and were cheap (that is, he liked them until he tried
+# to program one...)
+#
+
+# Missing in vc303a and vc303 descriptions:  they scroll 2 lines at a time
+# every other linefeed.
+vc303|vc103|vc203|volker-craig 303, 
+	OTbs, OTns, am, 
+	cols#80, lines#24, 
+	bel=^G, clear=^L$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^N, 
+	home=^K$<40>, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^N, 
+	ll=\017$<1>W, 
+vc303a|vc403a|volker-craig 303a, 
+	clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>, 
+	home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, 
+	use=vc303,
+# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
+vc404|volker-craig 404, 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=^X$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 
+	cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, ed=^W$<40>, 
+	el=^V$<20>, home=^Y$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^U, 
+	kcuu1=^Z, 
+vc404-s|volker-craig 404 w/standout mode, 
+	cud1=^J, rmso=^O, smso=^N, use=vc404,
+# From: <wolfgang@cs.sfu.ca>
+# (vc414: merged in cup/dl1/home from an old vc414h-noxon)
+vc414|vc414h|Volker-Craig 414H in sane escape mode., 
+	OTbs, am, 
+	cols#80, lines#24, 
+	clear=\E\034$<40>, cud1=\E^K, cuf1=^P, cuu1=\E^L, 
+	cup=\E\021%p2%c%p1%c$<40>, dch1=\E3, dl1=\E\023$<40>, 
+	ed=\E^X, el=\E\017$<10/>, home=\E^R, ich1=\E\072, 
+	il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P, 
+	kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, 
+	kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, 
+	lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, lf4=PF5, 
+	lf5=PF6, lf6=PF7, lf7=PF8, rmso=\E^_, smso=\E^Y, 
+vc415|volker-craig 415,
+	clear=^L, use=vc404,
+
+######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
+#
+
+#### IBM PC and clones
+#
+
+# The pcplot IBM-PC terminal emulation program is really messed up. It is
+# supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
+# doesn't support scrolling regions, ignores add line commands, and ignores
+# delete line commands. Consequently, the resulting behavior looks like a
+# crude adm3a-type terminal.
+# Steve Jacobson 8/85
+pcplot|pc-plot terminal emulation program, 
+	xenl@, 
+	csr@, rc@, sc@, il@, dl@, il1@, dl1@, use=vt100,
+# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
+# I've found that my KayPro II, running MDM730, continues to emulate an
+# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
+# system the following termcap entry works well:
+# I have noticed a couple of minor glitches, but nothing I can't work
+# around. (I added two capabilities from the BRL entry -- esr)
+kaypro|kaypro2|kaypro II, 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W, 
+	el=^X, home=^^, il1=\EE, ind=^J, 
+	kcud1=^J, kcuf1=^L, kcuu1=^K, 
+
+# From IBM, Thu May  5 19:35:27 1983
+# (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
+ibmpc|ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
+	cud1=^J, ind=^J$<10>, bel=^G, .smir=\0R, am, cub1=^], OTbs,
+	kcud1=^_, clear=^L^K, cr=^M^^, home=^K, lines#24, cuu1=^^,
+	cuf1=^\, cols#80,
+
+#### Apple II
+#
+# Apple II firmware console first, then various 80-column cards and 
+# terminal emulators.  For two cents I'd toss all these in the UFO file
+# along with the 40-column apple entries.
+#
+
+# From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
+#	'it#8' tells UNIX that you have tabs every 8 columns.  This is a
+#		function of TIC, not the firmware.
+#	The clear key on a IIgs will do something like clear-screen, 
+#		depending on what you're in.
+appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface, 
+	OTbs, am, bw, eo, msgr, 
+	cols#80, it#8, lines#24, 
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\, 
+	cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 
+	home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J, 
+	kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N, 
+	smso=^O, 
+# Apple //e with 80-column card, entry from BRL
+# The modem interface is permitted to discard LF (maybe DC1), otherwise
+# passing characters to the 80-column firmware via COUT (PR#3 assumed).
+# Auto-wrap does not work right due to newline scrolling delay, which also
+# requires that you set "stty cr2".
+# Note: Cursor addressing is only available via the Pascal V1.1 entry,
+# not via the BASIC PR#3 hook.  All this nonsense can be avoided only by
+# using a terminal emulation program instead of the built-in firmware.
+apple2e|Apple //e, 
+	bw, msgr, 
+	cols#80, lines#24, 
+	bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_, 
+	ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W, 
+	is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K, 
+	nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N, 
+	smso=^O, 
+# mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
+# 4.20, with incoming and outgoing terminals both on 0, emulation On.
+apple2e-p|Apple //e via Pascal, 
+	cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H, 
+	kcud1=^J, 
+	use=apple2e, 
+# (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
+# Enable DC3/DC1 flow control with "stty ixon -ixany".
+apple-ae|ASCII Express, 
+	OTbs, am, bw, msgr, nxon, xon, 
+	cols#80, it#8, lines#24, 
+	bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 
+	cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 
+	home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, 
+	kcud1=^J, kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, 
+	rs1=^R^N, sgr0=^N, smso=^O, 
+appleII|apple ii plus, 
+	OTbs, am, 
+	cols#80, it#8, lines#24, 
+	clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\, 
+	cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, 
+	cvvis=^TC6, ed=^K, el=^], flash=\024G1$<200/>\024T1, 
+	home=\E^Y, ht=\t, is2=\024T1\016, kcud1=^J, kcuf1=^U, 
+	rmso=^N, sgr0=^N, smso=^O, 
+# Originally by Gary Ford 21NOV83
+# From: <ee178aci%sdcc7@SDCSVAX.ARPA>  Fri Oct 11 21:27:00 1985
+apple-80|apple II with smarterm 80 col, 
+	am, bw, OTbs,
+	cols#80, lines#24, 
+	cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J, 
+	cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, 
+	ed=\013$<10*/>, el=^]$<10/>, home=^Y, 
+apple-soroc|apple emulating soroc 120,
+	am,
+	cols#80, lines#24,
+	bel=^G, clear=\E*$<300>, cr=\r, cub1=\b, cud1=\n,
+	cuf1=\f, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+	ed=\EY, el=\ET, home=^^, ind=\n, kcub1=\b, kcud1=\n,
+	kcuf1=\f, kcuu1=^K,
+# From Peter Harrison, Computer Graphics Lab, San Francisco
+#   ucbvax!ucsfmis!harrison  .....uucp
+#   ucbvax!ucsfmis!harrison@BERKELEY   .......ARPA
+# "These two work.  If you don't have the inverse video chip for the
+# Apple with videx then remove the :so: and :se: fields."
+# (apple-videx: this used to be called DaleApple -- esr)
+apple-videx|Apple with videx videoterm 80 column board with inverse video, 
+	am, xenl, OTbs,
+	cols#80, it#8, lines#24, 
+	clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\, 
+	cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, 
+	el=^], home=^Y, ht=\t, kcub1=^H, kcud1=^J, kcuf1=^U, 
+	khome=^Y, rmso=^Z2, sgr0=^Z2, smso=^Z3, 
+# My system [for reference] : Apple ][+, 64K, Ultraterm display card,
+#			      Apple Cat ][ 212 modem, + more all
+#			      controlled by ASCII Express: Pro.
+# From Dave Shaver <isucs1!shaver>
+apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell, 
+	OTbs, am, eo, xt, 
+	cols#80, lines#24, 
+	acsc=, clear=^L, cuf1=^\, 
+	cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 
+	flash=^W35^W06, home=^Y, 
+	is2=^V4^W06\017\rVisible Bell Installed.\016\r\n, 
+	rmso=^N, smso=^O, 
+apple-uterm|Ultraterm for Apple micros, 
+	OTbs, am, eo, xt, 
+	cols#80, lines#24, 
+	acsc=, clear=^L, cuf1=^\, 
+	cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 
+	home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O, 
+# from trwrba!bwong (Bradley W. Wong):
+#
+# This entry assumes that you are using an apple with the UCSD Pascal
+# language card.  SYSTEM.MISCINFO is assumed to be the same as that
+# supplied with the standard apple except that screenwidth should be set
+# using SETUP to 80 columns.  Note that the right arrow in not mapped in
+# this termcap entry.  This is because that key, on the Apple, transmits
+# a ^U and would thus preempt the more useful "up" function of vi.
+#
+# HMH 2/23/81
+apple80p|80-column apple with Pascal card, 
+	am, bw, 
+	cols#80, lines#24, 
+	clear=^Y^L, cuf1=\034\072, cuu1=\037, 
+	cup=\036%p2%{32}%+%c%p1%{32}%+%c, ed=^K, el=^], home=^Y, kcub1=^H, 
+#
+# Apple II+ equipped with Videx 80 column card
+#
+# Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
+# manually converted by D A Gwyn
+#
+# DO NOT use any terminal emulation with this data base, it works directly
+# with the Videx card.  This has been tested with vi 1200 baud and works fine.
+#
+# This works great for vi, except I've noticed in pre-R2, ^U will scroll back
+# 1 screen, while in R2 ^U doesn't.
+# For inverse alternate character set add:
+#	<smacs>=^O:<rmacs>=^N:
+# (apple-v: added it#8 -- esr)
+apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520), 
+	am, xenl, 
+	cols#80, it#8, lines#24, 
+	bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H, 
+	cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, 
+	cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>, 
+	ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_, 
+	khome=^Y, rmso=^Z2, smso=^Z3, 
+apple-videx3|vapple|Apple II with 80 col card, 
+	OTbs, am, 
+	cols#80, lines#24,
+ 	clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
+	el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+	kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E , kf4=\E!, kf5=\E", kf6=\E#,
+	kf7=\E$, kf8=\E%, kf9=\E&, khome=\EH,
+#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
+aepro|Apple II+ running ASCII Express Pro--vt52, 
+	OTbs, cols#80, lines#24, 
+	clear=\014$<300/>, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 
+	el=\EK, home=\EH, 
+# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
+apple-vm80|ap-vm80|apple with viewmax-80, 
+	OTbs, 
+	cols#80, lines#24, 
+	clear=\014$<300/>, 
+	cuf1=\034\072, el=\035, 
+	cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_, 
+	ed=\013$<300/>, home=\031$<200/>, 
+
+#### Apple Lisa & Macintosh
+#
+
+# (lisa: changed <cvvis> to <cnorm> -- esr)
+lisa|apple lisa console display (black on white), 
+	am, eo, msgr, OTbs,
+	cols#88, it#8, lines#32, 
+	acsc=lfmekcjdttuvvuwsqax`nb, 
+	clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
+	civis=\E[5h, cnorm=\E[5l, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 
+	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=\t, ich1=\E[@, 
+	il1=\E[L, is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, 
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, 
+	rmso=\E[m, rmul=\E[m, smacs=\E[11m, 
+	sgr0=\E[m, smso=\E[7m, smul=\E[4m, 
+liswb|apple lisa console display (white on black), 
+	is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m, 
+	smso=\E[m, smul=\E[4m, use=lisa,
+
+# lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
+# <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
+#
+# These entries assume that the 'Auto Wraparound' is enabled.
+# Xon-Xoff flow control should also be enabled.
+#
+# The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
+# settings are in non-volatile memory and don't need to be reset upon login.
+# Also setting the number of columns glitches the screen annoyingly.
+# You can type "reset" to get them set.
+#
+lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation, 
+	OTbs, OTpt, am, xenl, xon, 
+	OTkn#4, cols#80, it#8, lines#24, vt#3, 
+	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J, 
+	el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, 
+	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ, 
+	kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, 
+	rc=\E8, rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, 
+	rmul=\E[m, 
+	rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r, 
+	sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 
+	tbc=\E[3g, 
+# Lisaterm in 132 column ("wide") mode.
+lisaterm-w|Apple Lisa with Lisaterm in 132 column mode, 
+	cols#132, 
+	kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm, 
+# Although MacTerminal has insert/delete line, it is commented out here
+# since it is much faster and cleaner to use the "lock scrolling region"
+# method of inserting and deleting lines due to the MacTerminal implementation.
+# Also, the "Insert/delete ch" strings have an extra character appended to them
+# due to a bug in MacTerminal V1.1.  Blink is disabled since it is not
+# supported by MacTerminal.
+mac|macintosh|Macintosh with MacTerminal, 
+	xenl, 
+	OTdN#30, 
+	blink@, dch1=\E[P$<7/>,
+	.dl1=\E[M$<20/>, ich1=\E[@$<9/>, .il1=\E[L$<20/>, 
+	ip=$<7/>, 
+	use=lisa,
+# Lisaterm in 132 column ("wide") mode.
+mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode, 
+	cols#132, use=mac, 
+
+#### Radio Shack/Tandy
+#
+
+# (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
+# I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
+# From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
+coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II, 
+	am, OTbs,
+	cols#80, it#8, lines#24, 
+	bel=^G, blink=^_", bold=\E\072^A, civis=^E , 
+	clear=^L$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F, 
+	cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I, 
+	dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, 
+	kcud1=^J, kcuf1=^I, kcuu1=^L, rev=^_ , rmso=^_!, 
+	rmul=^_#, sgr0=\037!\E\072\0, smso=^_ , smul=^_", 
+# (trs2: removed obsolete ":nl=^_:" -- esr)
+trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M, 
+	am, msgr, OTbs,
+	cols#80, it#8, lines#24, 
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^], 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, 
+	ed=^B, el=^A, home=^F, ht=\t, il1=^D, ind=^J, kbs=^H, kcub1=^\, 
+	kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N, 
+# From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
+# (This had extension capabilities
+#	:BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
+#	:CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
+# I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
+trs16|trs-80 model 16 console, 
+	am, OTbs,
+	cols#80, it#8, lines#24, 
+	acsc=l_mbk`javewcquxs, 
+	bel=^G, civis=\ERc, clear=^L, cnorm=\ERC,
+	cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 
+	dch1=\EQ, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, 
+	ich1=\EP, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 
+	kcuf1=\EC, kcuu1=\EA, kf0=^A, kf1=^B, kf2=^D, 
+	kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S, khome=^W, 
+	lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, 
+	mc4=\E]+, mc5=\E]=,
+	lf7=f8, rmacs=\ERg, rmso=\ER@, sgr0=\ER@, smacs=\ERG, 
+	smso=\ERD, 
+
+#### Atari ST
+#
+
+# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
+atari|atari st, 
+	am, OTbs,
+	cols#80, it#8, lines#25, 
+	clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 
+	ed=\EJ, el=\EK, ht=\t, il1=\EL, kcub1=\ED, kcud1=\EB, 
+	kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep, 
+# UniTerm terminal program for the Atari ST:  49-line VT220 emulation mode
+# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
+uniterm|uniterm49|UniTerm VT220 emulator with 49 lines, 
+	lines#49, 
+	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
+# MiNT VT52 emulation. 80 columns, 25 rows.
+# MiNT is Now TOS, the operating system which comes with all Ataris now
+# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
+# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
+# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
+st52|Atari ST with VT52 emulation,
+	am, km,
+	cols#80, lines#25,
+	bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M,
+	cub1=\ED, cud1=\EB, cuf1=\EC,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
+	ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J,
+	ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
+	kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P,
+	kcuf1=\E#M, kcuu1=\E#H, kf0=\E#D, kf1=\E#;,
+	kf2=\E#<, kf3=\E#=, kf4=\E#>, kf5=\E#?, kf6=\E#@,
+	kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
+	kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J,
+	rc=\Ek, ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej,
+	sgr0=\Eq, smcup=\Ee, smso=\Ep,
+ 
+#### Commodore Business Machines
+#
+# Formerly located in West Chester, PA; went spectacularly bust in 1994
+# after years of shaky engineering and egregious mismanagement.  Made one
+# really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
+# C-128, VIC-20).  The C-64 is said to have been the most popular machine
+# ever (most units sold); they can still be found gathering dust in closets
+# everywhere.
+#
+
+# From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
+# Added a few more entries, converted caret-type control sequence (^x) entries
+# to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
+#
+# :as:, :ae:			Support for alternate character sets.
+# :ve=\E[\040p:vi=\E[\060\040p:	cursor visible/invisible.
+# :xn:  vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
+#     This one appears to fix a problem I always had with a line ending
+#     at 'width+1' (I think) followed by a blank line in vi. The blank
+#     line tended to disappear and reappear depending on how the screen
+#     was refreshed. Note that this is probably needed only if you use
+#     something like a Dnet Fterm with the window sized to some peculiar
+#     dimension larger than 80 columns.
+# :k0=\E9~:	map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
+# (amiga: removed obsolete :kn#10:,
+# also added empty <acsc> to suppress a warning --esr)
+amiga|Amiga ANSI, 
+	OTbs, am, bw, xenl, 
+	cols#80, lines#24, 
+	acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, 
+	cbt=\E[Z, civis=\E[0\sp, clear=\E[H\E[J, 
+	cnorm=\E[\sp, cub=\E[%p1%dD, cub1=\E[D, 
+	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
+	dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 
+	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 
+	ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 
+	ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, 
+	kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 
+	kf0=\E9~, kf1=\E0~, kf2=\E1~, kf3=\E2~, kf4=\E3~, 
+	kf5=\E4~, kf6=\E5~, kf7=\E6~, kf8=\E7~, kf9=\E8~, 
+	rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rs1=\Ec, 
+	rmso=\E[m, rmul=\E[m, sgr0=\E[m, smacs=^N, 
+	smso=\E[7m, smul=\E[4m, 
+
+# From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
+# (amiga: added empty <acsc> to suppress a warning.
+# I'm told this entry screws up badly with AS225, the Amiga
+# TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
+amiga-h|Hans Verkuil's Amiga ANSI, 
+	bw, msgr, OTbs,
+	cols#80, lines#24, 
+	acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z, 
+	civis=\2330 p, clear=\233H\233J, cnorm=\233 p, 
+	cr=^M, cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, 
+	cud1=\233B, cuf=\233%p1%dC, cuf1=\233C, 
+	cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, 
+	dch=\233%p1%dP, dch1=\233P, dim=\2332m, 
+	ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G, 
+	home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, 
+	ind=\233S, indn=\233%p1%dS, invis=\2338m, 
+	is2=\23320l, kbs=^H, kcub1=\233D, kcud1=\233B, 
+	kcuf1=\233C, kcuu1=\233A, kdch1=\177, kf0=\2339~, 
+	kf1=\2330~, kf2=\2331~, kf3=\2332~, kf4=\2333~, 
+	kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~, 
+	kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T, 
+	rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, 
+	rmso=\2330m, rmul=\2330m, rs1=\Ec, sgr0=\2330m, 
+	smacs=^N, smcup=\233?7l, smso=\2337m, smul=\2334m, 
+
+# Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
+# 	I'm trying to write a termcap for a commodore b-128, and I'm
+# having a little trouble. I've had to map most of my control characters
+# to something that unix will accept (my delete-char is a ctrl-t, etc),
+# and create some functions (like cm), but thats life.
+# 	The problem is with the arrow keys - right, and up work fine, but
+# left deletes the previous character and down I just can't figure out.
+# Jove knows what I want, but I don't know what it's sending to me (it
+# isn't thats bound to next-line in jove).
+# 	Anybody got any ideas? Here's my termcap.
+# DAG -- I changed his "^n" entries to "\n"; see if that works.
+#
+commodore|b-128|Commodore B-128 micro, 
+	am, bw, 
+	OTdN#20, cols#80, lines#24, pb#150, 
+	OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J, cuf1=^F, 
+	cup=\E\013%p1%2d\054%p2%2d\054$<20/>, cuu1=^P, 
+	dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>, 
+	home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>, 
+	kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, 
+	rmir=, smir=, 
+
+#### North Star
+#
+# North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
+northstar|North Star Advantage, 
+	OTbs, cols#80, lines#24, 
+	clear=\004$<200/>, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>, 
+	el=\016$<200/>, home=\034\032$<200/>,
+
+#### Osborne
+#
+# Thu Jul  7 03:55:16 1983
+#	
+# As an aside, be careful; it may sound like an anomaly on the 
+# Osborne, but with the 80-column upgrade, it's too easy to 
+# enter lines >80 columns!
+#	
+# I've already had several comments...
+# The Osborne-1 with the 80-col option is capable of being 
+# 52, 80, or 104 characters wide; default to 80 for compatibility 
+# with most systems.
+#	
+# The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
+osborne-w|osborne1-w|osborne I in 104-column mode, 
+	msgr, ul, xt, 
+	cols#104, lines#24, 
+	bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J, 
+	kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El, 
+# Osborne I	from ptsfa!rhc (Robert Cohen) via BRL
+osborne|osborne1|osborne I in 80-column mode, 
+	OTbs, am, mir, msgr, ul, xhp, 
+	OTdB#4, cols#80, lines#24, 
+	clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	dch1=\\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, 
+	is2=^Z, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 
+	rmir=, rmso=\E), rmul=\Em, smir=\EQ, smso=\E(, smul=\El, 
+#
+# Osborne Executive definition from BRL
+# Similar to tvi920
+# Added by David Milligan and Tom Smith (SMU)
+osexec|Osborne executive, 
+	OTbs, am, 
+	OTug#1, cols#80, lines#24, xmc#1, 
+	OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, 
+	il1=\EE, is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, 
+	kcuf1=^L, kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, 
+	kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, 
+	kf8=^AH\r, kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, 
+	smir=, smso=\Ej, smul=\El, tbc=\E3, 
+
+#### Console types for obsolete UNIX clones
+#
+# Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
+# machines that tried to emulate the UNIX look'n'feel.  Coherent and Venix
+# were commercial, Minix an educational tool sold in conjunction with a book.
+# Memory-segmentation limits and a strong tendency to look like V7 long after
+# it was obsolete made all three pretty lame.  Venix croaked early.  Coherent
+# and Minix were ported to 32-bit Intel boxes, only to be run over by a
+# steamroller named `Linux' (which, to be fair, traces some lineage to Minix). 
+# Coherent's vendor, the Mark Williams Company, went belly-up in 1994.  There
+# are also, I'm told, Minix ports that ran on Amiga and Atari machines and
+# even as single processes under SunOS and the Macintosh OS.
+#
+
+# This is the entry provided with minix 1.7.4, with bogus :ri: removed.
+minix|minix console (v1.7), 
+	am, xenl, 
+	cols#80, it#8, lines#25, 
+	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M, 
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I, 
+	ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 
+	is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
+	kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, 
+	kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +, 
+	lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM, 
+	rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m, 
+# Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
+minix-old|minix console (v1.5), 
+	xon,
+	cols#80, it#8, lines#25, 
+	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M, 
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, 
+	ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 
+	il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, 
+	kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, 
+	nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m, 
+	rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m, 
+# The linewrap option can be specified by editing /usr/include/minix/config.h
+# before recompiling the minix 1.5 kernel.
+minix-old-am|minix console with linewrap,
+	am, use=minix-old,
+
+pc-minix|minix console on an Intel box,
+	use=klone+acs, use=minix,
+
+# According to the Coherent 2.3 manual, the PC console is similar
+# to a z19. The differences seem to be (1) 25 lines, (2) no status
+# line, (3) standout is broken, (4) ins/del line is broken, (5)
+# has blinking and bold.
+pc-coherent|pcz19|coherent|IBM PC console running Coherent,
+	am, mir, 
+	cols#80, it#8, lines#25, 
+	bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, 
+	cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 
+	cuu1=\EA, dch1=\EN, ed=\EJ, el=\EK, home=\EH, 
+	ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 
+	kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO, 
+	rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep, 
+
+# According to the Venix 1.1 manual, the PC console is similar
+# to a DEC vt52.  Differences seem to be (1) arrow keys send 
+# different strings, (2) enhanced standout, (3) added insert/delete line.
+# Note in particular that it doesn't have automatic margins.
+# There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
+# not described here because this derives from an old termcap entry.
+pc-venix|venix|IBM PC console running Venix,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=\EJ, el=\EK,
+	clear=\EH\EJ, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cols#80, lines#25,
+	cuf1=\EC, ht=^I, it#8, ri=\EI, cuu1=\EA,
+	kcuu1=\EH, kcud1=\EP, kcuf1=\EM, kcub1=\EK, kbs=^H,
+	il1=\EL, dl1=\EM, khome=\EG,
+
+#### Miscellaneous microcomputer consoles
+#
+# If you know anything more about any of these, please tell me.
+#
+
+# The MAI Basic Four computer was obsolete at the end of the 1980s.
+# It may be used as a terminal by putting it in "line" mode as seen on 
+# one of the status lines.
+# Initialization is similar to CIT80. <is2> will set ANSI mode for you.  
+# Hardware tabs set by <if> at 8-spacing.  Auto line wrap causes glitches so
+# wrap mode is reset by <cvvis>.  Using <ind>=\E[S caused errors so I 
+# used \ED instead.
+# From: bf347@lafn.org (David Lawyer), 28 Jun 1997
+mai|basic4|MAI Basic Four in ansi mode, 
+	am, da, db, mir, msgr, 
+	cols#82, it#8, lines#25, 
+	bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h, 
+	cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P, 
+	dl1=\E[M, ed=^_, el=^^, home=^], ht=^I, 
+	if=/usr/lib/tabset/vt100, il1=\E[L, ind=\ED, 
+	is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H, 
+	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 
+	kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T, 
+	rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, 
+	smir=\E[4h, smso=\E[7m, smul=\E[4m, 
+# basis from Peter Harrison, Computer Graphics Lab, San Francisco
+#   ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
+# (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
+basis|BASIS108 computer with terminal translation table active, 
+	clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H, 
+	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E), 
+	smso=\E(, use=adm3a,
+# luna's BMC terminal emulator
+luna|luna68k|LUNA68K Bitmap console, 
+	cols#88, lines#46, 
+	use=ansi-mini,
+megatek|pegasus workstation terminal emulator,
+	cols#83, lines#60, os, am,
+# The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived 
+# interface (pre-Macintosh by several years) that went nowhere.
+xerox820|x820|Xerox 820,
+	cr=^M, cud1=^J, ind=^J, bel=^G, am, cub1=^H,
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+	clear=1^Z, ed=^Q, el=^X, cols#80, home=^^, lines#24,
+	cuf1=^L, cuu1=^K,
+
+#### Videotex and teletext
+#
+
+# From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
+#
+minitel1|minitel 1,
+	am, bw, eslok, hz,
+	cols#40, lines#24, colors#8, pairs#8, 
+	bel=^G, cr=^M, civis=^T, cnorm=^Q, cub1=^H, cuf1=^I, cud1=^J,
+	cuu1=^K, home=^^,nel=^M^J, cup=^_%p1%'A'%+%c%p2%'A'%+%c, clear=^L,
+	el=^X, acsc=f0g1\,\,+../, enacs=^Y, ind=^J, ri=^K, blink=\EH,
+	rev=\E], sgr0=\EI\E\\, smso=\E], rmso=\E\\, msgr,
+	sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;, hs, tsl=^_@%p1%'A'%+%c,
+	fsl=^J, is2=\E;`ZQ\E:iC\E:iE^Q, rep=%p1%c^R%p2%'?'%+%c, op=\EG,
+	setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%'@'%+%c%;,
+# is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
+minitel1b|minitel 1-bistandard (in 40cols mode),
+	cub=\E[%p1%dD, cuf=\E[%p1%dC, cuu=\E[%p1%dA, cud=\E[%p1%dB,
+	ed=\E[J, el1=\E[1K, il1=\E[L, il=\E[%p1%dL, dl1=\E[M, dl=\E[%p1%dM,
+	smir=\E[4h, rmir=\E[4l, mir, dch1=\E[P, dch=\E[%p1%dP,
+	smkx=\E;iYA\E;jYC, .rmkx=\E;jYA, is1=\E;iYA\E;jYC, kcub1=\E[D,
+	kcuf1=\E[C, kcuu1=\E[A, kcud1=\E[B, kdch1=\E[P, kdl1=\E[M, kel=^X,
+	kctab=^I, khome=\E[H, kclr=\E[2J, kich1=\E[4h, kil1=\E[L,
+	use=minitel1,
+# <rmkx> posait des problemes (logout en sortant de vi).
+minitel1b-80|minitel 1-bistandard (standard teleinformatique),
+	am@, bw@,
+	cols#80, colors@, it#8, pairs@, 
+	civis=^_@A^T^J, cnorm=^_@A^Q^J, cuf1=\E[C, cuu1=\E[A, home=\E[H,
+	nel=\EE, ht=^I, cup=\E[%i%p1%d;%p2%dH, clear=\E[H\E[2J, el=\E[K,
+	ind=\ED, ri=\EM, blink=\E[5m, rev=\E[7m, bold=\E[1m, sgr0=\E[m,
+	smso=\E[7m, rmso=\E[27m, smul=\E[4m, rmul=\E[24m,
+	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
+	sc=\E7, rc=\E8, smkx@, rmkx@, is1@, is2@, rep@, hz@, kf0=\EOp,
+	kf1=\EOq, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv,
+	kf7=\EOw, kf8=\EOx,kf9=\EOy, kent=\EOM, op@, setf@,
+	use=minitel1b,
+# \E\:1}	switch to te'le'informatique mode (ascii terminal/ISO 6429)
+# \E[?3l	80 columns
+# \E[?4l	scrolling on
+# \E[12h	local echo off
+# \Ec		reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
+# \E)0		G1 DEC set (line graphics)
+#
+# From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
+m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
+	eslok, hs, xenl, OTbs,
+	cols#80, it#8, lines#24, wsl#72, xmc#0,
+	acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
+	blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
+	cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G,
+	fsl=^J, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L,
+	ind=^J, indn=^J, ip=$<7/>, is1=\E\:1}\Ec\E[?4l\E[12h,
+	is2=\Ec\E[12h\E)0, is3=\E[?3l kbs=^H, kclr=\E[2J,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kdch1=\E[P, kdl1=\E[M, kf0=\EOp, kf1=\EOq, kf10=\EOp,
+	kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
+	kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
+	kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
+	mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rin=\EM,
+	rmacs=^O, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E[?4l\E[12h,
+	rs2=\Ec\E)0, sc=\E7, sgr0=\E[m, smacs=^N, smir=\E[4h,
+	smso=\E[7m, smul=\E[4m, tsl=^_@A, u6=\E[%i%d;%dR, u7=\E[6n,
+
+######## OBSOLETE VDT TYPES
+#
+# These terminals are *long* dead -- these entries are retained for
+# historical interest only.
+
+#### Amtek Business Machines
+#
+
+# (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
+# but these caps were commented out in 8.3; also, removed overridden
+# ":do=^J:" -- esr)
+abm80|amtek business machines 80, 
+	am, bw, OTbs,
+	cols#80, lines#24, 
+	cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P, 
+	cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L, 
+	dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, 
+
+#### Bell Labs blit terminals
+#
+# These were AT&T's official entries.  The 5620 FAQ maintained by 
+# David Breneman <daveb@dgtl.com> has this to say:
+#
+#  Actually, in the beginning was the Jerq, and the Jerq was white with a
+#  green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
+#  was good.  But lo, upon the horizon loomed a mighty management-type person
+#  (known now only by the initials VP) who said, the mighty Jerq must stay
+#  alone, and could not go forth into the world. So Locanthi and Pike put the
+#  Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
+#  world. And the Jerq lived the rest of its days in research, but never
+#  strayed from those paths.
+#
+#  In all seriousness, the Blit was originally known as the Jerq, but when
+#  it started to be shown outside of the halls of the Bell Labs Research
+#  organization, the management powers that be decided that the name could
+#  not remain. So it was renamed to be Blit. This was in late 1981.
+#
+# (The AT&T 5620 was the commercialized Blit.  Its successors were the 630,
+# 730, and 730+.)
+#
+
+blit|jerq|blit running teletype rom,
+	xon,cr=^M, ind=^J, bel=^G, am, ht=^I, it#8, ul, eo,
+	cud1=^J, cuf1=\EC, cuu1=\EA, cub1=\ED,
+	cols#87, lines#72, clear=^L, el=\EK,
+	cup=\EY%p2%{32}%+%c%p1%{32}%+%c,
+	il1=\EF!, dl1=\EE!, ich1=\Ef!, dch1=\Ee!,
+	il=\EF%p1%{32}%+%c, dl=\EE%p1%{32}%+%c,
+	ich=\Ef%p1%{32}%+%c, dch=\Ee%p1%{32}%+%c,
+	kcuu1=\EA, kcud1=\EB, kcuf1=\EC, kcub1=\ED, kbs=^H,
+	kf1=\Ex, kf2=\Ey, kf3=\Ez,
+
+# (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
+cbblit|fixterm|blit running columbus code,
+	smso=\EU!, rmso=\EV!, smul=\EU", rmul=\EV",
+	flash=\E^G, ed=\EJ, smir=\EQ, rmir=\ER, ich1@, cols#88,
+	mc5=^R, mc4=^T, mc5p=\EP%p1%03d, use=blit,
+
+oblit|ojerq|first version of blit rom,
+	xon,cr=^M, cud1=^J, ind=^J, bel=^G, cols#88, lines#72, it#8, ht=^I,
+	am, ul, eo, mir, il=\Ef%p1%{32}%+%c, dl=\Ee%p1%{32}%+%c,
+	dl1=\EE, rmir=\ER, smir=\EQ, dch1=\EO, cub1=\ED, da, db,
+	il1=\EF, ed=\EJ, el=\EK, clear=^L, cup=\EY%p2%{32}%+%c%p1%{32}%+%c,
+	cuf1=\EC, cuu1=\EA, flash=\E^G, kbs=^H,
+
+#### Bolt, Beranek & Newman (bbn)
+#
+# The BitGraph was a product of the now-defunct BBN Computer Corporation.
+# The parent company, best known as the architects of the Internet, is
+# still around.
+#
+# Jeff DelPapa <dp@world.std.com> writes:
+# The bitgraph was a large white box that contained a monochrome bitmap
+# display, and a 68000 to run it.  You could download code and run it on
+# the cpu, it had 128kb (I think) of memory.  I used one in the late
+# 70's, sure beat a vt100.  It had one strange feature tho -- it used
+# the cpu to bitblt pixels to scroll, it took longer than the refresh
+# rate, and looked like a rubber sheet stretching, then snapping
+# upwards.  It had everything the early mac had, except a floppy drive a
+# small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
+# Beranek and Neuman) sold at most a few hundred of them to the real
+# world.  DOD may have bought more...
+# 
+
+# Entries for the BitGraph terminals.  The problem 
+# with scrolling in vi can only be fixed by getting BBN to put 
+# smarter scroll logic in the terminal or changing vi or padding 
+# scrolls with about 500 ms delay.
+#	
+# I always thought the problem was related to the terminal 
+# counting newlines in its input buffer before scrolling and 
+# then moving the screen that much. Then vi comes along and 
+# paints lines in on the bottom line of the screen, so you get 
+# this big white gap.
+
+bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
+	is2=\E>\E[?5l\E[?7h, flash=\E[?5h$<200/>\E[?5l, use=bg2.0,
+bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
+	is2=\E>\E[?5h\E[?7h, flash=\E[?5l$<200/>\E[?5h, use=bg2.0,
+bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
+	OTbs, xenl, 
+	cols#85, lines#64, 
+	bel=^G, clear=\E[H\E[J$<150>, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, 
+	cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, 
+	dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I, 
+	il1=\E[L$<2*>, ind=\n$<280>, kcub1=\E[D, 
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 
+	kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1, lf2=PF2, 
+	lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, 
+	sc=\E7, sgr0=\E[m, smkx=\E=, smso=\E[7m, 
+
+bg1.25rv|bbn bitgraph 1.25 (reverse video),
+	flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, use=bg1.25,
+bg1.25nv|bbn bitgraph 1.25 (normal video),
+	is2=\E>\E[?5l\E[?7h, flash=\E[?5h$<200/>\E[?5l, use=bg1.25,
+# (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
+bg1.25|bbn bitgraph 1.25,
+	cr=^M, cud1=^J, bel=^G, il1=\E[L$<2*>, cub1=^H,
+	ed=\E[J$<150>, el=\E[K$<2>, clear=\E[H\E[J$<150>, cup=%i\E[%p1%d;%p2%dH,
+	cols#85, dl1=\E[M$<2*>, cud1=\E[B, kf1=\EP, kf2=\EQ, kf3=\ER,
+	kf4=\ES, kcud1=\EB, rmkx=\E>, kcub1=\ED, kcuf1=\EC, smkx=\E=,
+	kcuu1=\EA, lines#64, ll=\E[64;1H, lf1=PF1, lf2=PF2, lf3=PF3,
+	lf4=PF4, cuf1=\E[C, ht=^I, rmso=\E[m, sgr0=\E[m, ind=\n$<280>,
+ 	smso=\E[7m, cuu1=\E[A, rmam=\E[?7l, smam=\E[?7h, 
+
+#### Chromatics
+#
+
+# I have put the long strings in <smcup>/<rmcup>. Ti sets up a window 
+# that is smaller than the screen, and puts up a warning message 
+# outside the window. Te erases the warning message, puts the 
+# window back to be the whole screen, and puts the cursor at just
+# below the small window. I defined <cnorm> and <civis> to really turn 
+# the cursor on and off, but I have taken this out since I don't 
+# like the cursor being turned off when vi exits.   
+cg7900|chromatics|chromatics 7900,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#40, am,
+	clear=^L, cub1=^H, cup=^AM%p2%d\,%p1%d\,, cuf1=\035, cuu1=^K,
+	home=\034, ll=^A|, el=^A`, ed=^Al, il1=^A>2, dl1=^A<2,
+	ich1=^A>1, dch1=^A<1,
+	smso=^AC4\,^Ac7\,, rmso=^AC1\,^Ac2\,, uc=^A^A_^A\0,
+	smcup=^AP0^AO1^AR1^AC4\,^Ac0\,^L^AM0\,42\,WARNING DOUBLE ENTER ESCAPE and ^U^AC1\,^Ac2\,^AW0\,0\,79\,39\,,
+	rmcup=^AW0\,40\,85\,48\,^L^AW0\,0\,85\,48\,^AM0\,40\,,
+
+#### Computer Automation
+#
+
+ca22851|computer automation 22851,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cup=\02%i%p1%c%p2%c, cols#80,
+	lines#24, clear=^L$<8>, am, cub1=\025, cuu1=\026, home=\036,
+	el=\035, ed=\034, cuf1=\011, kcub1=\025, kcuu1=\026,
+	kcud1=\027, khome=\036,
+
+#### Cybernex
+#
+
+# This entry has correct padding and the undocumented "ri" capability
+cyb83|xl83|cybernex xl-83,
+	am, OTbs,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=^P$<62>, el=^O$<3>,
+	clear=^L$<62>, cup=^W%p1%{32}%+%c%p2%{32}%+%c, cols#80, home=^K,
+	kcud1=^J, kcub1=^H, kcuf1=^I, kcuu1=^N,
+	lines#24, cuu1=^N, cuf1=^I, ri=^N,
+# (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
+cyb110|mdl110|cybernex mdl-110, 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=^X$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 
+	cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, 
+	dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>, 
+	ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y, ht=^I$<43>, 
+	ich1=\016A\035$<3.5>, il1=\016A\016\035$<65>, ind=^J, 
+	rmso=^NG, smso=^NF, 
+
+#### Datapoint
+#
+# Datapoint is gone.  They used to be headquartered in Texas.
+# They created ARCnet, an Ethernet competitor that flourished for a while
+# in the early 1980s before 3COM got wise and cut its prices.  The service
+# side of Datapoint still lives (1995) in the form of Intelogic Trace.
+#
+
+dp3360|datapoint|datapoint 3360, 
+	am, OTbs,
+	cols#82, lines#25, 
+	bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z, 
+	ed=^_, el=^^, home=^], ind=^J, 
+
+# From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
+# The Datapoint 8242 Workstation was sold at least between 1985 
+# and 1989. To make the terminal work with this entry, press 
+# CONTROL-INT-INT to take the terminal off-line, and type (opt). 
+# Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO 
+# CR/LF off. Use control-shift-[] as escape key, control-I as tab, 
+# shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
+# fact unusable because the strings sent by the terminal conflict
+# with other keys).
+# The terminal is capable of displaying "box draw" characters.
+# For each graphic character you must send 2 ESC's (\E\E) followed 
+# by a control character as follows: 
+#         character        meaning
+#         =========        =======
+#         ctrl-E           top tee
+#         ctrl-F           right tee
+#         ctrl-G           bottom tee
+#         ctrl-H           left tee
+#         ctrl-I           cross
+#         ctrl-J           top left corner
+#         ctrl-K           top right corner
+#         ctrl-L           bottom left corner
+#         ctrl-M           bottom right corner
+#         ctrl-N           horizontal line
+#         ctrl-O           vertical line
+# Unfortunately this cannot be fitted into the termcap/terminfo 
+# description scheme. 
+dp8242|datapoint 8242, 
+	msgr, 
+	cols#80, lines#25, 
+	bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=^M, cub1=^H, 
+	cud1=^J, cup=^I%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, 
+	ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C, 
+	is1=\E^L\E^N\0\230\0\317^U^W^X\E^D,
+	rs1=\E^L\E^N\0\230\0\317^U^W^X\E^D,
+	kbs=^H, kcub1=^D, kcud1=^B, 
+	rep=\E^S%p1%c%p2%c,
+	kcuf1=^F, kcuu1=^E, kf1=\007\Ee, kf2=\011\Ed, kf3=\012\Ec,
+	kf4=\012\Eb, kf5=\023\Ea, kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, 
+	kf9=\EL\Eb, kf10=\EK\Ea, nel=^M^J, ri=^K, 
+	rmso=\E^D, rmul=\E^D, smso=\E^E, smul=\E^F, 
+	wind=\E^L\E^N%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
+
+#### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
+#
+# These entries are DEC's official terminfos for its older terminals.
+# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
+# Engineering for more information.  Updated terminfos and termcaps 
+# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
+#
+
+gt40|dec gt40,
+	cr=^M, cud1=^J, bel=^G, OTbs,
+	cub1=^H, cols#72, lines#30, os,
+gt42|dec gt42,
+	cr=^M, cud1=^J, bel=^G, OTbs,
+	cub1=^H, cols#72, lines#40, os,
+
+vt50|dec vt50,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=\EJ, el=\EK, clear=\EH\EJ,
+	cols#80, lines#12, cuf1=\EC, ht=^I, cuu1=\EA, OTbs,
+vt50h|dec vt50h,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=\EJ, el=\EK, OTbs,
+	clear=\EH\EJ, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cols#80, lines#12,
+	cuf1=\EC, ht=^I, ri=\EI, cuu1=\EA,
+# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
+vt52|dec vt52, 
+	cols#80, it#8, lines#24, OTbs,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
+	bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, 
+	cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 
+	cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, 
+	kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 
+	nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, 
+
+# (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
+vt61|vt-61|vt61.5|dec vt61,
+	cr=^M$<20>, cud1=^J, ind=^J$<20>, bel=^G, cub1=^H,
+	ed=\EJ$<120>, el=\EK$<70>, clear=\EH\EJ$<120>,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cols#80, lines#24,
+	cuf1=\EC$<20>, ht=^I, ri=\E$<20>I, cuu1=\EA$<20>,
+	kcuu1=\EA, kcud1=\EB, kcuf1=\EC, kcub1=\ED,
+
+# The gigi does standout with red!
+# (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
+gigi|vk100|dec gigi graphics terminal,
+	OTbs, cr=^M, cud1=^J, ind=^J, bel=^G, cols#84, lines#24, am,
+	clear=\E[H\E[2J, cub1=^H, cup=\E[%i%p1%d;%p2%dH, cuf1=\E[C,
+	cuu1=\E[A, el=\E[K, ed=\E[J, smso=\E[7;31m, rmso=\E[m,
+	smul=\E[4m, rmul=\E[m, sgr0=\E[m,
+	is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h, smkx=\E[?1h\E=,
+	rmkx=\E[?1l\E>, kcuu1=\EOA,
+	kcud1=\EOB, kcuf1=\EOC, kcub1=\EOD, khome=\E[H, kf1=\EOP,
+	kf2=\EOQ, kf3=\EOR, kf4=\EOS, ht=^I, ri=\EM, xenl, cud=\E[%p1%dB,
+	cuu=\E[%p1%dA, cub=\E[%p1%dD, cuf=\E[%p1%dC, rmam=\E[?7l, smam=\E[?7h, 
+
+# DEC PRO-350 console (VT220-style).  The 350 was DEC's attempt to produce
+# a PC differentiated from the IBM clones.  It was a total, ludicrous,
+# grossly-overpriced failure (among other things, DEC's OS didn't include
+# a format program, so you had to buy pre-formatted floppies from DEC at
+# a hefty premium!).
+pro350|decpro|dec pro console, 
+	cols#80, it#8, lines#24, OTbs,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 
+	el=\EK, home=\EH, ht=\t, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 
+	kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, 
+	kf4=\EI, kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, 
+	ri=\EI, rmacs=\EG, rmso=\E^N, rmul=\E^C, smacs=\EF, 
+	smso=\E^H, smul=\E^D, 
+
+dw1|decwriter I,
+	cr=^M, cud1=^J, ind=^J, bel=^G, OTbs,
+	cub1=^H, cols#72, hc, os,
+dw2|decwriter|dw|decwriter II,
+	cr=^M, cud1=^J, ind=^J, bel=^G, kbs=^H, cub1=^H, cols#132, hc, os, OTbs,
+# \E(B		Use U.S. character set (otherwise # => british pound !)
+# \E[20l	Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
+# \E[w   	10 char/in pitch
+# \E[1;132	full width horizontal margins
+# \E[2g		clear all tab stops
+# \E[z		6 lines/in
+# \E[66t	66 lines/page (for \f)
+# \E[1;66r	full vertical page can be printed
+# \E[4g		clear vertical tab stops
+# \E>		disable alternate keypad mode (so it transmits numbers!)
+# \E[%i%p1%du	set tab stop at column %d (origin == 1)
+#		(Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is 
+#		a tab stop)
+#
+#       The dw3 does standout with wide characters.
+#
+dw3|la120|decwriter III,
+	cr=^M, cud1=^J, ind=^J, bel=^G, kbs=^h, cub1=^H, cols#132, hc,
+	os, smso=\E[6w, rmso=\E[w, sgr0=\E[w, ht=^I, OTbs,
+	is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
+	is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
+dw4|decwriter IV,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, cols#132, hc, os, am, OTbs,
+	ht=^I, is2=\Ec, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, kbs=^H,
+
+# These aren't official
+ln03|dec ln03 laser printer, 
+	hc, 
+	cols#80, lines#66, 
+	bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, 
+	ind=^J, nel=^M^J, rmso=\E[22m, rmul=\E[24m, 
+	sgr0=\E[m, smso=\E[1m, smul=\E[4m, 
+ln03-w|dec ln03 laser printer 132 cols, 
+	cols#132, 
+	bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, 
+	kcub1=^H, kcud1=^J, nel=^M^J, use=ln03,
+
+#### Delta Data (dd)
+#
+
+# Untested. The cup sequence is hairy enough that it probably needs work.
+# The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
+# There are BSD-derived termcap entries floating around for this puppy
+# that are *certainly* wrong.
+delta|dd5000|delta data 5000,
+	cud1=^J, ind=^J, bel=^G, am, cub1=^H, clear=^NR, OTbs,
+	cup=^O%p1%p1%{16}%m%{2}%*%-%'9'%+%c%p2%p2%{16}%m%{2}%*%-%'9'%+%c,
+	cols#80, lines#27, home=^NQ, cuf1=^Y, cuu1=^Z, el=^NU, dch1=^NV,
+
+#### Digital Data Research (ddr)
+#
+
+# (ddr: I added <rmam>/<smam> based on the init string -- esr)
+ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator, 
+	am, xenl, OTbs,
+	cols#80, it#8, lines#24, vt#3,
+ 	blink=\E[5m$<2/>, bold=\E[1m$<2/>, clear=\E[H\E[2J$<50/>,
+	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
+	cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, ed=\E[J$<50/>,
+	el=\E[K$<3/>, home=\E[H, ht=\t, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
+	kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
+	kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
+	rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l, 
+	rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
+	rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, sgr0=\E[m$<2/>,
+	smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m$<2/>,
+
+#### Evans & Sutherland
+#
+
+# Jon Leech <leech@cs.unc.edu> tells us:
+# The ps300 was the Evans & Sutherland Picture System 300, a high
+# performance 3D vector graphics system with a bunch of specialized hardware.
+# Approximate date of release was 1982 (early 80s, anyway), and it had several
+# evolutions including (limited) color versions such as the PS330C. PS300s
+# were effectively obsolete by the late 80s, replaced by raster graphics
+# systems, although specialized applications like molecular modelling
+# hung onto them for a while longer.  AFAIK all E&S vector graphics systems
+# are out of production, though of course E&S is very much alive (in 1996).
+# (ps300: changed ":pt@:" to "it@" -- esr)
+#
+ps300|Picture System 300, 
+	xt, 
+	it@, 
+	rmso@, rmul@, smso@, smul@, use=vt100,
+
+#### General Electric (ge)
+#
+
+terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200, 
+	hc, os, OTbs,
+	cols#120, 
+	bel=^G, cr=^M, cud1=^J, ind=^J,
+
+#### Heathkit/Zenith
+#
+
+# Here is a description of the H19 DIP switches:
+#
+# S401
+# 0-3 = baud rate as follows:
+# 
+#         3       2       1       0
+#	---	---	---	--- 
+#         0       0       1       1       300 baud
+#         0       1       0       1       1200 baud
+#         1       0       0       0       2400 baud
+#         1       0       1       0       4800 baud
+#         1       1       0       0       9600 baud
+#         1       1       0       1       19.2K baud
+# 
+# 4 = parity (0 = no parity)
+# 5 = even parity (0 = odd parity)
+# 6 = stick parity (0 = normal parity)
+# 7 = full duplex (0 = half duplex)
+# 
+# S402 
+# 0 = block cursor (0 = underscore cursor)
+# 1 = no key click (0 = keyclick)
+# 2 = wrap at end of line (0 = no wrap)
+# 3 = auto LF on CR (0 = no LF on CR)
+# 4 = auto CR on LF (0 = no CR on LF)
+# 5 = ANSI mode (0 = VT52 mode)
+# 6 = keypad shifted (0 = keypad unshifted)
+# 7 = 50Hz refresh (1 = 60Hz refresh)
+# 
+# Factory Default settings are as follows:
+#          7 6 5 4 3 2 1 0
+# S401     1 0 0 0 1 1 0 0
+# S402     0 0 0 0 0 0 0 0
+# (h19: I added <rmam>/<smam> based on the init string;
+# also added empty <acsc> to suppress a tic warning -- esr)
+h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
+	acsc=, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\E[1L$<1*>, am, cub1=^H, 
+	ed=\E[J, el=\E[K, clear=\E[2J, cup=\E[%i%p1%d;%p2%dH, cols#80,
+	dch1=\E[1P, dl1=\E[1M$<1*>, cud1=\E[1B, OTbs,
+	rmir=\E[4l, home=\E[H, smir=\E[4h, lines#24, mir,
+	cuf1=\E[1C, smacs=\E[10m, rmacs=\E[11m, msgr, ht=^I, it#8,
+	rmso=\E[m, smso=\E[7m, cuu1=\E[1A, cvvis=\E[>4h, cnorm=\E[>4l,
+	kbs=^h, kcuu1=\E[1A, kcud1=\E[1B, kcub1=\E[1D, kcuf1=\E[1C,
+	khome=\E[H,
+	kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, lf6=blue,
+	lf7=red, lf8=white, kf6=\EOP, kf7=\EOQ, kf8=\EOR,
+	ri=\EM, is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
+	rmam=\E[?7l, smam=\E[?7h, 
+h19-bs|heathkit w/keypad shifted,
+	smkx=\Et, rmkx=\Eu, use=h19-b,
+h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
+	smkx=\Et, rmkx=\Eu, use=h19-u,
+# (h19: merged in <ip> from BSDI hp19-e entry>;
+# also added empty <acsc> to suppress a tic warning --esr)
+# From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998 
+# Tim tells us that:
+# I have an old Zenith-19 terminal at home that still gets a lot of use.
+# This terminal suffers from the same famous insert-mode padding lossage
+# that has been acknowledged for the Z29 terminal.  Emacs is nearly
+# unusable on this box, since even a half-scroll up or down the window
+# causes flaming terminal death.
+#   
+# On the Z19, the only way I have found around this problem is to remove
+# the :al: and :dl: entries entirely.  No amount of extra padding will
+# help (I have tried up to 20000).  Removing <il1=\EL$> and <dl1=\EM$>
+# makes Emacs a little slower, but it remains in the land of the living.
+# Big win.
+h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19, 
+	am, eslok, hs, mir, msgr, OTbs,
+	cols#80, it#8, lines#24, 
+	acsc=, bel=^G, clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, 
+	cud1=\EB, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 
+	cvvis=\Ex4, dch1=\EN, ed=\EJ, el=\EK, 
+	fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J, ip=<1.5/>,
+	kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 
+	kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, 
+	kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, 
+	lf7=red, lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, 
+	rmso=\Eq, smacs=\EF, smir=\E@, smso=\Ep, 
+	tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo, 
+h19-u|heathkit with underscore cursor,
+	cvvis@, cnorm@,
+	use=h19-b,
+h19-g|h19g|heathkit w/block cursor, 
+	cnorm=\Ex4,
+	use=h19-b,
+alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
+	lines#60, il1=\EL, dl1=\EM,
+	use=h19,
+
+# The major problem with the Z29 is that it requires more padding than the Z19.
+#
+# The problem with declaring an H19 to be synonymous with a Z29 is that
+# it needs more padding. It especially loses if a program attempts
+# to put the Z29 into insert mode and insert text at 9600 baud. It
+# even loses worse if the program attempts to insert tabs at 9600
+# baud. Adding padding to text that is inserted loses because in 
+# order to make the Z29 not die, one must add so much padding that
+# whenever the program tries to use insert mode, the effective 
+# rate is about 110 baud.
+# 
+# What program would want to put the terminal into insert mode 
+# and shove stuff at it at 9600 baud you ask?  
+# 
+# Emacs. Emacs seems to want to do the mathematically optimal 
+# thing in doing a redisplay rather than the practical thing.
+# When it is about to output a line on top of a line that is 
+# already on the screen, instead of just killing to the end of 
+# the line and outputting the new line, it compares the old line 
+# and the new line and if there are any similarities, it 
+# constructs the new line by deleting the text on the old line 
+# on the terminal that is already there and then inserting new
+# text into the line to transform it into the new line that is 
+# to be displayed. The Z29 does not react kindly to this.
+# 
+# But don't cry for too long.... There is a solution. You can make
+# a termcap entry for the Z29 that says the Z29 has no insert mode.
+# Then Emacs cannot use it. "Oh, no, but now inserting into a 
+# line will be really slow", you say. Well there is a sort of a
+# solution to that too. There is an insert character option on 
+# the Z29 that will insert one character. Unfortunately, it 
+# involves putting the terminal into ansi mode, inserting the 
+# character, and changing it back to H19 mode. All this takes 12 
+# characters. Pretty expensive to insert one character, but it 
+# works. Either Emacs doesn't try to use its inserting hack when 
+# it's only given an insert character ability or the Z29 doesn't 
+# require padding with this (the former is probably more likely, 
+# but I haven't checked it out).
+# (z29: added empty <acsc> to suppress a tic warning, merged in
+# status line capabilities from BRL entry --esr)
+z29|zenith29|z29b|zenith z29b, 
+	OTbs, OTpt, am, eslok, hs, mir, msgr, 
+	OTkn#10, cols#80, lines#24, 
+	OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
+	cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A, cvvis=\Ex4,
+	dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1, ed=\EJ$<14>, el=\EK$<1>,
+	fsl=\Ek\Ey5, home=\EH, ht=^I, ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>,
+	ind=\n$<2>, is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB,
+	kcuf1=\EC, kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
+	kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, lf0=home,
+	ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq, rmul=\Es0, smacs=\EG,
+	smir=\E@, smso=\Ep, smul=\Es8, tsl=\Ej\Ex5\Ex1\EY8%+\s\Eo, 
+# z29 in ansi mode. Assumes that the cursor is in the correct state, and that
+# the world is stable. <rs1> causes the terminal to be reset to the state
+# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
+# cursor, bc -> block cursor.
+# From: Mike Meyers
+# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
+# looks vt100-compatible -- esr)
+z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode, 
+	OTbs, OTpt, am, eslok, hs, mir, msgr, 
+	OTkn#10, cols#80, it#8, lines#24, 
+	OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J, 
+	cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, 
+	cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, 
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 
+	cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, 
+	dl=\E[%p1%dM, dsl=\E[>1l, ed=\E[J, el=\E[K, 
+	fsl=\E[u\E[>5l, home=\E[H, ht=^I, hts=\EH, 
+	if=/usr/share/tabset/vt100, il=\E[%p1%dL, 
+	ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB, 
+	kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, 
+	kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, 
+	kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, 
+	lf0=help, mc0=\E#7, nel=^M\ED, rc=\E[r, rev=\E[7m, 
+	ri=\EM, rmcup=\E[?7h, rmso=\E[m, rmul=\E[m, 
+	rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m, 
+	sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, 
+	smul=\E[4m, tbc=\E[3g, 
+	tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K, 
+z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor, 
+	rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
+	use=z29a,
+z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick, 
+	rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
+	use=z29a,
+z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick, 
+	rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
+	use=z29a,
+# From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
+z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
+	am, eslok, hs, mc5i, mir, msgr, xon,
+	cols#80, lines#24,
+	acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~0a, bel=^G,
+	blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
+	clear=\E[2J\E[H, cnorm=\E[>5l, cr=\r,
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\b,
+	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+	dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
+	dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
+	fsl=\E[u, home=\E[H, ht=\t, hts=\EH, il=\E[%p1%dL,
+	il1=\E[1L, ind=\n, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J,
+	ka1=\EOw, ka3=\EOu, kb2=\EOy, kbs=\b, kc1=\EOq,
+	kc3=\EOs, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+	kcuu1=\E[A, ked=\E[J, kf1=\EOS, kf2=\EOT, kf3=\EOU,
+	kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, kf8=\EOR,
+	kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
+	mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u,
+	rev=\E[7m, rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l,
+	rmso=\E[0m, rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s,
+	sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smkx=\E[>7h,
+	smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+	tsl=\E[s\E[>1h\E[25;%i%p1%dH,
+
+# From: Brad Brahms <Brahms@USC-ECLC>
+z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor, 
+	cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
+# (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
+z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc, 
+	OTbs, OTpt, mir, msgr, 
+	OTkn#10, cols#80, it#8, lines#24, 
+	acsc=, clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA, 
+	cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK, 
+	home=\EH, ht=\t, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB, 
+	kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, 
+	kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, 
+	kf8=\ER, kf9=\EOI, khome=\EH, ri=\EI, rmacs=\EG, 
+	rmir=\EO, rmso=\Eq, smacs=\EF, smir=\E@, smso=\Ep, 
+p19|h19-b with il1/dl1, 
+	dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
+# From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
+# (ztx: removed duplicate :sr: -- esr)
+ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11, 
+	am, eslok, hs, OTbs,
+	cols#80, it#8, lines#24, 
+	clear=\EE, cub1=^H, cud1=^J, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 
+	dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, 
+	ht=\t, il1=\EL, 
+	is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>, kbs=^H, 
+	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 
+	kf0=\ES, kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, 
+	kf5=\EP, kf6=\EQ, kf7=\ER, ri=\EI, rmso=\Eq, 
+	rmul=\Eq, smso=\Es5, smul=\Es2, 
+	tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, 
+
+#### IMS International (ims)
+#
+# There was a company called IMS International located in Carson City, 
+# Nevada, that flourished from the mid-70s to mid-80s.  They made S-100
+# bus/Z80 hardware and a line of terminals called Ultimas.  
+#
+
+# From: Erik Fair <fair@ucbarpa.berkeley.edu>  Sun Oct 27 07:21:05 1985
+ims950-b|bare ims950 no init string, 
+	is2@, use=ims950,
+# (ims950: removed obsolete ":ko@:" -- esr)
+ims950|ims televideo 950 emulation, 
+	xenl@, 
+	flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, 
+	kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, 
+	kf9@, khome@, use=tvi950,
+# (ims950-rv: removed obsolete ":ko@:" -- esr)
+ims950-rv|ims tvi950 rev video, 
+	xenl@, 
+	flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, 
+	kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, 
+	kf9@, khome@, use=tvi950-rv,
+ims-ansi|ultima2|ultimaII|IMS Ultima II, 
+	am, OTbs,
+	cols#80, it#8, lines#24, 
+	clear=\E[H\E[2J, cub1=^H, cud1=\ED, 
+	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, 
+	el=\E[0K, if=/usr/share/tabset/vt100, ht=\t, 
+	is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D, 
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 
+	ri=\EM, rmso=\E[m\E[1m, rmul=\E[m\E[1m, 
+	sgr0=\E[m, smso=\E[7m, smul=\E[4m, 
+
+#### Intertec Data Systems
+#
+# I think this company is long dead as of 1995.  They made an early CP/M
+# micro called the "Intertec Superbrain" that was moderately popular,
+# then sank out of sight.
+#
+
+superbrain|intertec superbrain,
+	OTbs, am, bw,
+	cols#80, lines#24,
+	OTbc=^U, cr=^M, cud1=^J, ind=^J, bel=^G, cub1=^H, ed=\E~k<10*>,
+	el=\E~K$<15>, clear=\f$<5*>,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, 
+	kcud1=^J, kcub1=^U, kcuf1=^F, kcuu1=^K, 
+	cuf1=^F, ht=^I, rmcup=\f, smcup=\f, cuu1=^k,
+# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>, 
+# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
+# and the reverse is actually true.  Try it. -- esr)
+intertube|intertec|Intertec InterTube,
+	am, OTbs, 
+	cols#80, lines#25, 
+	bel=^G, cr=^M, ind=^J, cud1=^J, bel=^G, cub1=^H, 
+	clear=^L, home=^A, cuu1=^Z, cuf1=^F,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>,
+	smso=\E0P, rmso=\E0@, 
+# The intertube 2 has the "full duplex" problem like the tek 4025: if you
+# are typing and a command comes in, the keystrokes you type get interspersed
+# with the command and it messes up
+intertube2|intertec data systems intertube 2, 
+	OTbs, cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c, 
+	el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, 
+	ll=^K^X\r, vpa=\013%p1%c, use=intertube, 
+
+#### Ithaca Intersystems
+#
+# This company made S100-bus personal computers long ago in the pre-IBM-PC
+# past.  They used to be reachable at:
+#
+#	Ithaca Intersystems
+#	1650 Hanshaw Road
+#	Ithaca, New York 14850
+#
+# However, the outfit went bankrupt years ago.
+#
+
+# The Graphos III was a color graphics terminal from Ithaca Intersystems.
+# These entries were written (originally in termcap syntax) by Brian Yandell 
+# <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the 
+# University of Wisconsin.
+
+# (graphos: removed obsolete and syntactically incorrect :kn=4:, 
+# removed <if=/usr/share/tabset/init.graphos> and 
+# <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
+graphos|graphos III, 
+	am, mir, 
+	cols#80, it#8, lines#24, 
+	clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z, cr=^M,
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+	cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+	ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L,
+	ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED,
+	rc=\E8, ri=\EM, rmdc=\E[4l, rmir=\E[4l, rmso=\E[m, sc=\E7,
+	sgr0=\E[m, smdc=\E[4h, smir=\E[4h, smso=\E[7m,
+graphos-30|graphos III with 30 lines, 
+	lines#30, 
+	cvvis=\Ez4;2;1z\Ez56;2;80;30z, 
+	use=graphos, 
+
+#### Modgraph
+#
+# These people used to be reachable at:
+#
+#	Modgraph, Inc
+#	1393 Main Street,
+#	Waltham, MA 02154
+#	Vox: (617)-890-5796.
+#
+# However, if you call that number today you'll get an insurance company.
+# I have mail from "Michael Berman, V.P. Sales, Modgraph" dated 
+# 26 Feb 1997 that says:
+#
+# Modgraph GX-1000, replaced by GX-2000.  Both are out of production, have been
+# for ~7 years.  Modgraph still in business.  Products are rugged laptop and
+# portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
+# panel-mount etc).  I can be emailed at sonfour@aol.com
+#
+# Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
+# dated 1984.  According to the manual, it featured Tek 4010/4014
+# graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
+#
+
+modgraph|mod24|modgraph terminal emulating vt100,
+	xenl@, 
+	cols#80, lines#24,
+	cvvis=\E\^9;0s\E\^7;1s, 
+	is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s, 
+	rf@, ri=\EM\E[K$<5/>, use=vt100,
+# The GX-1000 manual is dated 1984.  This looks rather like a VT-52.
+modgraph2|modgraph gx-1000 80x24 with keypad not enabled, 
+	am, da, db, 
+	cols#80, it#8, lines#24, 
+	clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>, 
+	ed=\EJ$<50/>, el=\EK$<3/>, ht=\t, 
+	is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1, 
+	ri=\EI$<5/>, 
+#
+# Modgraph from Nancy L. Cider <nancyc@brl-tbd>
+# BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
+# If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
+# mark and using delete-to-killbuffer work correctly.  However, we would
+# like normal mode of operation to be using a Modgraph with 48 line setting.
+# If we set TERM=mod (which is a valid entry in termcap with 48 lines)
+# the setting mark and delete-to-killbuffer results in the deletion of only
+# the line the mark is set on.
+# We've discovered that the delete-to-killbuffer works correctly
+# with TERM=mod and screen set to 80x48 but it's not obvious.  Only
+# the first line disappears but a ctrl-l shows that it did work
+# correctly.
+modgraph48|mod|Modgraph w/48 lines, 
+	OTbs, OTpt, am, xenl, 
+	cols#80, it#8, lines#48, vt#3, 
+	OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 
+	flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q, 
+	home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h, 
+	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, 
+	rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 
+	rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, 
+	smso=\E[7m, smul=\E[4m, 
+
+#### Morrow Designs
+# 
+# This was George Morrow's company.  They started in the late 1970s making
+# S100-bus machines.  They used to be reachable at:
+#
+#        Morrow
+#        600 McCormick St.
+#        San Leandro, CA 94577
+#
+# but they're long gone now (1995).
+#
+
+# The mt70 terminal was shipped with the Morrow MD-3 microcomputer. 
+# Jeff's specimen was dated June 1984.
+# From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
+mt70|mt-70|Morrow MD-70; native Morrow mode,
+	am, xon, mir, msgr, xon,
+	cols#80, lines#24, it#8,
+	bel=^G, cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2,
+	cr=\r, cub1=\b, cud1=\n, cuf1=\f,
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>, cuu1=^K, dch1=\EW,
+	dl1=\ER, ed=\EY, el=\ET$<10>, home=^^, ht=\t,
+	ich1=\EQ, il1=\EE, ind=\n, is1=\E"2\EG0\E], kbs=\b,
+	kcub1=^AL^M, kcud1=^AK^M, kcuf1=^AM^M, kcuu1=^AJ^M, kcbt=^A^Z^M,
+	kdch1=\177, khome=^AN^M, kclr=^An^M, khlp=^AO^M,
+	kf1=^A@^M, kf2=^AA^M, kf3=^AB^M, kf4=^AC^M, kf5=^AD^M,
+	kf6=^AE^M, kf7=^AF^M, kf8=^AG^M, kf9=^AH^M, kf10=^AI^M,
+	kf11=^A`^M, kf12=^Aa^M, kf13=^Ab^M, kf14=^Ac^M, kf15=^Ad^M,
+	kf16=^Ae^M, kf17=^Af^M, kf18=^Ag^M, kf19=^Ah^M, kf20=^Ai^M,
+	nel=^_, tbc=\E0, 
+	flash=\EK1$<200>\EK0, smcup=\E"2\EG0\E], rmcup=, 
+	smacs=\E$, rmacs=\E%,
+	acsc=+z\,{.yOi-x`|jGkFlEmDnHtLuKvNwMxIqJ,
+	invis@, dim=\EG2, smul=\EG1, use=adm+sgr,
+
+#### Motorola
+#
+
+# Motorola EXORterm 155	from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
+# (Seth H Zirin)
+ex155|Motorola Exorterm 155, 
+	OTbs, am, bw, 
+	OTkn#5, OTug#1, cols#80, lines#24, 
+	cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED, 
+	cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU, 
+	home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H, 
+	kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@, 
+	rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED, 
+
+#### Omron
+#
+# This company is still around in 1995, manufacturing point-of-sale systems.
+
+omron|Omron 8025AG, 
+	am, da, db, OTbs,
+	cols#80, lines#24, 
+	bel=^G, lines#24, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 
+	cuu1=\EA, cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, 
+	el=\EK, home=\EH, il1=\EL, ind=\ES, ri=\ET, 
+	rmso=\E4, smso=\Ef, 
+
+#### Ramtek
+#
+# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
+# were competition for things like the Tektronics 4025.
+#
+
+# Ramtek 6221 from BRL, probably by Doug Gwyn
+# The following SET-UP modes are assumed for normal operation:
+#	UNDERLINE_CURSOR	ANSI_MODE	AUTO_XON/XOFF_ON
+#	NEWLINE_OFF		80_COLUMNS
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements; I recommend
+#	SMOOTH_SCROLL	AUTO_REPEAT_ON	3_#_SHIFTED	WRAP_AROUND_ON
+# Hardware tabs are assumed to be every 8 columns; they can be set up by the
+# "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
+# Note that the Control-E key is useless on this brain-damaged terminal.  No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+rt6221|Ramtek 6221 80x24, 
+	OTbs, OTpt, msgr, xon, 
+	OTkn#4, cols#80, it#8, lines#24, vt#3, 
+	acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l, 
+	clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
+	cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 
+	cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I, 
+	hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR, 
+	kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H, 
+	nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>, 
+	rmso=\E[m, rmul=\E[m, 
+	rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>, 
+	sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m, 
+	smul=\E[4m, tbc=\E[3g, 
+# [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
+rt6221-w|Ramtek 6221 160x48, 
+	cols#160, lines#48, 
+	ll=\E[48;1H, use=rt6221, 
+
+#### RCA
+#
+
+# RCA VP3301 or VP3501
+rca|rca vp3301/vp3501, 
+	OTbs, cols#40, lines#24, 
+	clear=^L, cuf1=^U, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^Z, 
+	rmso=\E\ES0, smso=\E\ES1, 
+
+
+#### Selanar
+#
+
+# Selanar HiREZ-100 from BRL, probably by Doug Gwyn
+# The following SET-UP modes are assumed for normal operation:
+#	SET_DEFAULT_TABS	48_LINES		80_COLUMNS
+#	ONLINE			ANSI			CURSOR_VISIBLE
+#	VT102_AUTO_WRAP_ON	VT102_NEWLINE_OFF	VT102_MONITOR_MODE_OFF
+#	LOCAL_ECHO_OFF		US_CHAR_SET		WPS_TERMINAL_DISABLED
+#	CPU_AUTO_XON/XOFF_ENABLED			PRINT_FULL_SCREEN
+# For use with graphics software, all graphics modes should be set to factory
+# default.  Other SET-UP modes may be set for operator convenience or
+# communication requirements.  No delays are specified; use "stty ixon -ixany"
+# to enable DC3/DC1 flow control!
+# I commented out the scrolling capabilities since they are too slow.
+hirez100|Selanar HiREZ-100, 
+	OTbs, OTpt, mir, msgr, xon, 
+	OTkn#4, cols#80, it#8, lines#48, vt#3, 
+	acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 
+	cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, 
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 
+	hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H, 
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, 
+	kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, 
+	lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i, 
+	mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O, 
+	rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 
+	rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>, 
+	sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m, 
+	smul=\E[4m, tbc=\E[3g, 
+hirez100-w|Selanar HiREZ-100 in 132-column mode, 
+	cols#132, 
+	use=hirez100, 
+
+#### Signetics
+#
+
+# From University of Wisconsin
+vsc|Signetics Vsc Video driver by RMC, 
+	am, msgr, 
+	cols#80, it#8, lines#26, 
+	clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, 
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 
+	el=\E[K, home=\E[H, ht=^I, ind=^J, kbs=^H, 
+	kcub1=^H, kcud1=^J, nel=^M^J, rev=^_ , rmso=^_!, 
+	rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_", 
+
+#### Soroc
+#
+# Alan Frisbie <frisbie@flying-disk.com> writes:
+#
+# As you may recall, the Soroc logo consisted of their name,
+# with the letter "S" superimposed over an odd design.   This
+# consisted of a circle with a slightly smaller 15 degree (approx.)
+# wedge with rounded corners inside it.   The color was sort of
+# a metallic gold/yellow.
+# 
+# If I had been more of a beer drinker it might have been obvious
+# to me, but it took a clue from their service department to make
+# me exclaim, "Of course!"   The circular object was the top of
+# a beer can (the old removable pop-top style) and "Soroc" was an
+# anagram for "Coors".
+# 
+# I can just imagine the founders of the company sitting around
+# one evening, tossing back a few and trying to decide what to
+# call their new company and what to use for a logo.
+# 
+
+# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
+soroc120|iq120|soroc|soroc iq120, 
+	clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, 
+	kcud1=^J, kcuf1=^L, kcuu1=^K, use=adm3a,
+soroc140|iq140|soroc iq140,
+	cr=^M, cud1=^J, ind=^J, bel=^G, cols#80, lines#24, am, OTbs,
+	clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuf1=^L, cuu1=^K,
+	home=^^, ll=^^^K, el=\Et, ed=\Ey, il1=\Ee$<1*>, dl1=\Er$<.7*>,
+	smir=\E9, cbt=\EI, rmir=\E8, mir, dch1=\Ew, smso=\E\177, rmso=\E\177,
+	kbs=^H, kcuf1=^L, khome=^^, kcuu1=^K, kf0=^A0\r,
+	kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+	kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, smul=\E^A,
+	rmul=\E^A,
+
+#### Southwest Technical Products
+#
+# These guys made an early personal micro called the M6800.  
+# The ct82 was probably its console terminal.
+#
+
+# (swtp: removed obsolete ":bc=^D:" -- esr)
+swtp|ct82|southwest technical products ct82, 
+	am, 
+	cols#82, lines#20, 
+	bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S, 
+	cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, 
+	ed=^V, el=^F, home=^P, ich1=^\^X, il1=^\^Y, ind=^N, 
+	is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011, 
+	ll=^C, ri=^O, rmso=^^^F, smso=^^^V, 
+
+#### Synertek
+#
+# Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
+#
+# Synertek used to make ICs, various 6502-based single-board process
+# control and hobbyist computers, and assorted peripherals including a
+# series of small inexpensive terminals (I think they were one of the
+# first to have a "terminal-on-a-keyboard", where the terminal itself
+# was only slightly larger than the keyboard).
+#
+# They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
+# was a 40x24 terminal that could connect to a standard TV through a
+# video modulator.  The KTM-2/80 was the 80-column version (the 2/40
+# could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
+# I have a KTM-2/80 still in working order.  The KTM-2s had fully
+# socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
+# ROM and 2 ROMs as character generators. They were incredibly simple,
+# and I've never had any problems with mine (witness the fact that mine
+# was made in 1981 and is still working great... I've blown the video
+# output transistor a couple of times, but it's a 2N2222 :-)
+#
+# The KTM-3 (which is what is listed in the terminfo file) was their
+# attempt at putting a KTM-2 in a box (and some models came with a
+# CRT). It wasn't much different from the KTM-2 hardware-wise, but the
+# control and escape sequences are very different. The KTM-3 was always
+# real broken, at least according to the folks I've talked to about it.
+# 
+# The padding in the entry is probably off--these terminals were very
+# slow (it takes like 100ms for the KTM-2 to clear the screen...) And
+# anyone with any sanity replaced the ROMs with something that provided
+# a reasonable subset of VT100 functionality, since the usual ROMs were
+# obviously very primitive... oh, you could get an upgraded ROM from
+# Synertek for some incredible amount of money, but what hacker with an
+# EPROM burner would do that? :)
+# 
+# Sorry I don't have any contact info; I believe they were located in
+# Sunnyvale, and I'm fairly sure they are still manufacturing ICs
+# (they've gone to ASICs and FPGAs), but I doubt they're in the computer
+# business these days.
+#
+
+# Tested, seems to work fine with vi.
+synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
+	am, cub1=^H, cols#80, lines#24, ed=\EJ, el=\EK, clear=^Z,
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cuf1=^L, 
+
+#### Tab Office Products
+#
+#	TAB Products Co. - Palo Alto, California
+#	Electronic Office Products,
+#	1451 California Avenue 94304
+#
+# I think they're out of business.
+#
+
+# The tab 132 uses xon/xoff, so no padding needed.
+# <smkx>/<rmkx> have nothing to do with arrow keys.
+# <is2> sets 80 col mode, normal video, autowrap on (for <am>).
+# Seems to be no way to get rid of status line.
+# The manual for this puppy was dated June 1981.  It claims to be VT52-
+# compatible but looks more vt100-like.
+tab132|tab|tab132-15|tab 132/15, 
+	da, db, 
+	OTdN@, cols#80, lines#24, lm#96,
+	cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, 
+	dl1=\E[M, il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, 
+	kcub1=\E[D, kcud1=\E[B, kcuu1=\E[A, rmir=\E[4l, 
+	rmkx@, smir=\E[4h, smkx@, use=vt100,
+tab132-w|tab132 in wide mode,
+	cols#132, is2=\E[?7h\E[?3h\E[?5l, use=tab132,
+tab132-rv|tab132 in reverse-video mode,
+	is2=\E[?7h\E[?3l\E[?5h, use=tab132,
+tab132-w-rv|tab132 in reverse-video/wide mode,
+	is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
+
+
+#### Teleray
+#
+#	Research Incorporated
+#	6425 Flying Cloud Drive
+#	Eden Prairie, MN 55344
+#	Vox: (612)-941-3300
+#
+# The Teleray terminals were all discontinued in 1992-93.  RI still services
+# and repairs these beasts, but no longer manufactures them.  The Teleray
+# people believe that all the types listed below are very rare now (1995).
+# There was a newer line of Telerays (Model 7, Model 20, Model 30, and
+# Model 100) that were ANSI-compatible.
+#
+# Note two things called "teleray".  Reorder should move the common one
+# to the front if you have either.  A dumb teleray with the cursor stuck
+# on the bottom and no obvious model number is probably a 3700.
+#
+#% Teleray: Steve Schaefgen (612)-941-3300 (Sales Manager)
+
+t3700|dumb teleray 3700, 
+	cols#80, lines#24, OTbs,
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J, 
+t3800|teleray 3800 series, 
+	cols#80, it#8, lines#24, OTbs,
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, 
+	el=\EK, home=\EH, ht=^I, ind=^J, ll=\EY7 , 
+t1061|teleray|teleray 1061, 
+	am, km, xhp, xt, OTbs,
+	cols#80, it#8, lines#24, xmc#1, 
+	bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, 
+	cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 
+	cuu1=\EA, dch1=\EQ, dl1=\EM$<2*>, ed=\EJ$<1>, 
+	el=\EK, home=\EH, ht=^I, hts=\EF, ich1=\EP, 
+	il1=\EL$<2*>, ind=^J, ip=$<0.4*>, 
+	is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef, 
+	kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, 
+	kf6=^Z6, kf7=^Z7, kf8=^Z8, rmso=\ER@, rmul=\ER@, 
+	smso= \ERD, smul=\ERH, tbc=\EG, 
+t1061f|teleray 1061 with fast PROMs,
+	il1=\EL, ip@, dl1=\EM, use=t1061,
+# "Teleray Arpa Special", officially designated as
+# "Teleray Arpa network model 10" with "Special feature 720".
+# This is the new (1981) fast microcode updating the older "arpa" proms
+# (which gave meta-key and programmable-fxn keys).  720 is much much faster,
+# converts the keypad to programmable function keys, and has other goodies.
+# Standout mode is still broken (magic cookie, etc) so is suppressed as no
+# programs handle such lossage properly.
+# Note: this is NOT the old termcap's "t1061f with fast proms."
+# From: J. Lepreau <lepreau@utah-cs> Tue Feb  1 06:39:37 1983, Univ of Utah
+# (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
+t10|teleray 10 special, 
+	km, xhp, xt, OTbs,
+	cols#80, it#8, lines#24, xmc#2, 
+	clear=\Ej$<30/>, cub1=^H, cuf1=\EC, 
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 
+	dch1=\EQ, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=\t, 
+	ich1=\EP, il1=\EL, ind=\Eq, pad=\0, ri=\Ep, 
+	rmso=\ER@, rmul=\ER@, smso=\ERD, smul=\ERH, 
+# teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
+# back/forth words. Put the function keys (f1-f10) where they can be
+# found, and turn off the other magic keys along the top row, except
+# for line/local. Do the magic appropriate to make the page shifts work.
+# Also toggle ^S/^Q for those of us who use Emacs.
+t16|teleray 16, 
+	am, da, db, mir, xhp, xt, 
+	cols#80, lines#24, 
+	bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, 
+	cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, 
+	dch1=\E[P, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, 
+	ht=^I, il1=\E[L, ind=^J, kf1=^Z1, kf10=^Z0, 
+	kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, 
+	kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T, 
+	rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m, 
+	rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h, 
+	smso=\E[7m, smul=\E[4m, 
+
+#### Texas Instruments (ti)
+#
+
+# The Silent 700 was so called because it was built around a quiet thermal
+# printer.  It was portable, equipped with an acoustic coupler, and pretty
+# neat for its day.
+ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800, 
+	hc, os, OTbs,
+	cols#80, 
+	bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J, 
+
+#
+# Texas Instruments 916 VDT 7 bit control mode
+#
+ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL, 
+	da, db, in, msgr, 
+	cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>, 
+	cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB, 
+	cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 
+	cvvis=\E[?25h, dch=\E[%p1%dP$<250>, dch1=\E[P, 
+	dl=\E[%p1%dM, ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, 
+	el1=\E[1K, enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>, 
+	hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>, 
+	il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H, 
+	kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~, 
+	kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~, 
+	kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 
+	kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T, 
+	kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, 
+	smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, use=vt220, 
+#
+# Texas Instruments 916 VDT 8 bit control mode
+#
+ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL, 
+	kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C, 
+	kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~, 
+	kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~, 
+	kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~, 
+	kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H, 
+	kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, 
+	use=ti916, 
+#
+# Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
+#
+ti916-132|Texas Instruments 916 VDT vt220 132 column, 
+	cols#132, use=ti916, 
+#
+# Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
+#
+ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column, 
+	cols#132, use=ti916-8, 
+ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
+	am, xon, OTbs,
+	cols#80, it#8, lines#24,
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+	clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
+	csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B,
+	cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
+	cvvis=\E[?31h, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
+	ht=\t, hts=\EH, il1=\E[L, ind=\ED, kbs=\b, kcub1=\E[D,
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[16~,
+	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+	kich1=\E[@, rc=\E8, rev=\E[7m, ri=\EM, rmso=\E[m,
+	rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+	tbc=\E[3g,
+ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
+	am, xon,
+	cols#80, it#8, lines#24,
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+	clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
+	csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B,
+	cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
+	cvvis=\E[?31h, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
+	ht=\t, hts=\EH, il1=\E[L, ind=\ED, kbs=\b, kcub1=\E[D,
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>,
+	kf1=P$<\217>, kf2=Q$<\217>, kf3=R$<\217>,
+	kf4=S$<\217>, kf5=~$<\23316>, kf6=~$<\23317>,
+	kf7=~$<\23318>, kf8=~$<\23319>, kf9=~$<\23320>,
+	kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM, rmso=\E[m,
+	rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+	tbc=\E[3g,
+ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
+	cols#132,
+	use=ti924,
+ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
+	cols#132,
+	use=ti924-8,
+ti931|Texas Instruments 931 VDT,
+	am, xon, OTbs,
+	cols#80, lines#24,
+	bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=\r,
+	cub1=\ED, cud1=\EB, cuf1=\EC,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
+	dl1=\EO, ed=\EJ, el=\EI, home=\EH, ich1=\ER\EP\EM,
+	il1=\EN, ind=\Ea, invis=\E4H, is2=\EGB\E(@B@@\E),
+	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
+	kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3, kf4=\Ei4,
+	kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
+	kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@,
+	rmul=\E4@, sgr0=\E4@, smso=\E4A, smul=\E4D,
+ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
+	csr@, ind=\E[1S, ri=\E[1T,
+	use=ti924,
+# (ti926-8: I corrected this from the broken SCO entry -- esr)
+ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
+	csr@, ind=\2331S, ri=\2331T,
+	use=ti924-8,
+ti_ansi|basic entry for ti928,
+	xenl, csr=\E[%i%p1%d;%p2%dr,
+	am, eo, xon, bce,
+	cols#80, lines#25, colors#8, pairs#64,
+	op=\E[37;40m,
+	setaf=\E[3%p1%dm,
+	setab=\E[4%p1%dm,
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+	clear=\E[2J\E[H, cr=\r, cub1=\b, cud1=\E[B, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+	dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
+	ht=\t, ich1=\E[@, il1=\E[L, ind=\E[S, kbs=\b,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kf0=\E[V, kf1=\E[M, kf2=\E[N, kf3=\E[O, kf4=\E[P,
+	kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
+	khome=\E[H, kend=\E[F, kpp=\E[I, knp=\E[G,
+	ri=\E[T, rmso=\E[m,
+	rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+	it#8, ht=^I, cbt=\E[Z,
+#
+#       928 VDT 7 bit control mode
+#
+ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
+	kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~,
+	kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
+	kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
+	kf9=\E[26~, kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, 
+	kf13=\E[32~, kf15=\E[34~,
+	kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~,
+	use=ti_ansi,
+#
+#       928 VDT 8 bit control mode
+#
+ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
+	kdch1=\233P, kend=\2371\234, kent=\2338~,
+	kf1=\23317~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
+	kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
+	kf9=\23326~, kf10=\23328~, kf11=\23329~, kf12=\23331~, 
+	kf13=\23332~, kf15=\23334~, 
+	khome=\233H, kich1=\233@, knp=\233S, kpp=\233T, kprt=\23335~,
+	use=ti_ansi,
+
+#### Zentec (zen)
+#
+
+# (zen30: removed obsolete :ma=^L ^R^L^K^P:.  This entry originally
+# had just <smso>=\EG6 which I think means standout was supposed to be 
+# dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
+# <invis> might work-- esr)
+zen30|z30|zentec 30, 
+	am, mir, ul, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 
+	dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^, 
+	il1=\EE$<1.5*>, ind=^J, rmir=\Er, smir=\Eq, 
+	smso=\EG6, smul@, rmul@, use=adm+sgr,
+# (zen50: this had extension capabilities
+#	:BS=^U:CL=^V:CR=^B:
+# UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
+# which were also in the original entry -- esr)
+# (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
+zen50|z50|zentec zephyr, 
+	am, OTbs,
+	cols#80, lines#24, xmc#1, 
+	clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 
+	cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, 
+	ich1=\EQ, il1=\EE, kcub1=^H, kcud1=^J, kcuf1=^L, 
+	kcuu1=^K, khome=^^, 
+	invis@, rmul@, smul@, use=adm+sgr, 
+
+# CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
+cci|cci1|z8001|zen8001|CCI Custom Zentec 8001, 
+	OTbs, am, bw, 
+	cols#80, lines#24, 
+	blink=\EM", clear=\EH\EJ, cnorm=\EP, 
+	csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J, 
+	cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 
+	cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH, 
+	invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, 
+	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, 
+	mc4=^T, mc5=^R, rev=\EM$, ri=\EI, rmso=\EM , 
+	rmul=\EM , sgr0=\EM , smso=\EM$, smul=\EM0, 
+
+######## OBSOLETE UNIX CONSOLES
+#
+
+#### Altos
+#
+# Altos made a moderately successful line of UNIX boxes.  In 1990 they were
+# bought out by Acer, a major Taiwanese manufacturer of PC-clones.
+# Acer has a web site at http://www.acer.com.
+#
+# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
+# His comments suggest they were shipped with the system.
+#
+
+# (altos2: had extension capabilities
+#	:c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
+#	:c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
+#	:c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
+#	:cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
+#	:XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
+#	:YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
+#	:HL=^AP\r:SP=\E[i:\
+#	:IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
+#	:LO=\E[0q:LC=\E[5q:LL=\E[6q:\
+# Comparison with the k* capabilities makes it obvious that the c* things are
+# shift keys.  I have renamed them to keys 32 and up accordingly.  Also,
+# :sr: was given as a boolean-- esr)
+altos2|alt2|altos-2|altos II, 
+	cols#80, it#8, lines#24, xmc#0, 
+	clear=\E[H\E[2J, cr=\r, cub1=\010, cud1=\E[1B, 
+	cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, 
+	dch1=\E[P, dl=\E[M, ed=\E[J, el=\E[K, home=\E[H, 
+	ht=\011, ich1=\E[@, if=/usr/share/tabset/vt100, 
+	il1=\E[L, ind=\012, 
+	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 
+	kDL=^Am\r, kEOL=^An\r, kbs=\010, 
+	kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D, 
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	kdch1=^AM\r, kel=^AN\r, kf0=^AI\r, 
+	kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 
+	kf32=^A`\r, kf33=^Aa\r, kf34=^Ab\r, 
+	kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, 
+	kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, 
+	kf40=^Ah\r, kf41=^Ai\r, kf42=^Aj\r, 
+	kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, 
+	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 
+	khome=\E[f, kil1=^AJ\r, kind=^AO\r, 
+	nel=\r\012, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, 
+	sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, 
+# (altos3: had extension capabilities
+#	:c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
+#	:c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
+#	:c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
+#	:cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
+#	:XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
+#	:HL=^AP\r:SP=\E[i:\
+#	:IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
+altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V, 
+	blink=\E[5p, ri=\EM, sgr0=\E[p, 
+	use=altos2,
+altos4|alt4|altos-4|altos IV, 
+	use=wy50,
+# (altos7: had extension capabilities:
+#	:GG#0:GI=\EH8:GF=\EH7:\
+#	:c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
+#	:c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
+#	:c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
+#	:cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
+# Comparison with the k* capabilities makes it obvious that the c* things are
+# shift keys.  I have renamed them to keys 32 and up accordingly.  I have
+# also made this entry relative to adm12 in order to give it an <sgr>. The
+# <invis> imported by use=adm+sgr may work, let me know. -- esr)
+altos7|alt7|altos VII, 
+	am, mir, 
+	cols#80, lines#24, xmc#0, 
+	acsc=l2m1k3j5t4u9v=w0q\072x6n8,
+	blink=\EG2, bold=\EGt, clear=\E+\036, cr=\r, 
+	cub1=\010, cud1=\012, cuf1=\014, 
+	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013, 
+	dch1=\EW, dim=\EGp, dl=\ER, ed=\EY, el=\ET, 
+	home=\036, ht=\011, il1=\EE, ind=\012, invis=\EG1, 
+	is2=\E`:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, 
+	kDL=^Am\r, kEOL=^An\r, kbs=\010, 
+	kcbt=^AK\r, kclr=^AL\r, kcub1=\010, 
+	kcud1=\012, kcuf1=\014, kcuu1=\013, 
+	kdch1=^AM\r, kel=^AN\r, kf0=^AI\r, 
+	kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 
+	kf32=^A`\r, kf33=^Aa\r, kf34=^Ab\r, 
+	kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, 
+	kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, 
+	kf40=^Ah\r, kf41=^Ai\r, kf42=^Aj\r, 
+	kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, 
+	kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 
+	khome=\036, kil1=^AJ\r, kind=^AO\r, 
+	knp=\EK, kpp=\EJ, mc5=\Ed#, mc4=\EJ, 
+	nel=\r\012, ri=\Ej, rmir=\Er, smir=\Eq, 
+	use=adm+sgr,
+altos7pc|alt7pc|altos PC VII, 
+	kend=\ET, use=altos7,
+
+#### Apollo consoles
+#
+# Apollo got bought by Hewlett-Packard.  The Apollo workstations are 
+# labeled HP700s now.
+#
+
+# From: Gary Darland <goodmanc@garnet.berkeley.edu>
+apollo|apollo console, 
+	OTbs, am, mir, 
+	cols#88, lines#53, 
+	clear=^L, cub1=^H, cud1=\EB, cuf1=\EC, 
+	cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, 
+	dl1=\EL, ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, 
+	ind=\EE, ri=\ED, rmcup=\EX, rmir=\ER, rmso=\ET, 
+	rmul=\EV, smcup=\EW, smir=\EQ, smso=\ES, smul=\EU, 
+	vpa=\EO+\s, 
+
+# We don't know whether or not the apollo guys replicated DEC's firmware bug
+# in the VT132 that reversed <rmir>/<smir>.  To be on the safe side, disable
+# both these capabilities.
+apollo_15P|apollo 15 inch display, 
+	rmir@, smir@,
+	use=vt132,
+apollo_19L|apollo 19 inch display, 
+	rmir@, smir@,
+	use=vt132,
+apollo_color|apollo color display, 
+	rmir@, smir@,
+	use=vt132,
+
+#### Convergent Technology
+#
+# Burroughs bought Convergent shortly before it merged with Univac.
+# CTOS is (I believe) dead.  Probably the aws is too (this entry dates
+# from 1991 or earlier).
+#
+
+# Convergent AWS workstation from Gould/SEL UTX/32 via BRL
+# (aws: removed unknown :dn=^K: -- esr)
+aws|Convergent Technologies AWS workstation under UTX and Xenix, 
+	am, 
+	OTug#0, cols#80, lines#28, xmc#0, 
+	OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=, 
+	clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, 
+	dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c, 
+	ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K, 
+	kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF, 
+	rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN, 
+	vpa=\EV%p1%c, 
+awsc|Convergent Technologies AWS workstation under CTOS, 
+	am, 
+	OTug#0, cols#80, lines#24, xmc#0, 
+	OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L, 
+	cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF, 
+	el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A, 
+	rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE, 
+	smul=\EAC, 
+
+#### DEC consoles
+#
+
+# The MicroVax console.  Tim Theisen <tim@cs.wisc.edu> writes:
+# The digital uVax II's had a graphic display called a qdss.  It was
+# supposed to be a high performance graphic accelerator, but it was
+# late to market and barely appeared before faster dumb frame buffers
+# appeared.  I have only used this display while running X11.  However,
+# during bootup, it was in text mode, and probably had a terminal emulator
+# within it.  And that is what your termcap entry is for.  In graphics
+# mode the screen size is 1024x864 pixels.
+qdss|qdcons|qdss glass tty, 
+	am, OTbs,
+	cols#128, lines#57, 
+	clear=^Z$<1/>, cub1=^H, cud1=^J, cuf1=^L, 
+	cup=\E=%p1%c%p2%c, cuu1=^K, 
+
+#### Fortune Systems consoles
+#
+# Fortune made a line of 68K-based UNIX boxes that were pretty nifty
+# in their day; I (esr) used one myself for a year or so around 1984.
+# They had no graphics, though, and couldn't compete against Suns and
+# the like.  R.I.P.
+#
+
+# From: Robert Nathanson <c160-3bp@Coral> via tut   Wed Oct 5, 1983
+# (This had extension capabilities
+#	:rv=\EH:re=\EI:rg=0:GG=0:\
+#	:CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
+#	:RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
+#	:PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
+# It had both ":bs:" and ":bs=^H:"; I removed the latter.  Also, it had
+# ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
+# to force both magic cookie glitches off.  Once upon a time, I
+# used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
+# function keys; thus the "Al" value for HM was certainly an error.  I renamed
+# EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.  
+# I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
+# "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
+# names below.  I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
+fos|fortune|Fortune system, 
+	am, bw, OTbs,
+	cols#80, lines#25, 
+	acsc=l\sm"k(j*v%w#q&x-,
+	bel=^G, blink=\EN, clear=^L$<20>, cnorm=\E\\, cr=^M, 
+	cub1=^H, cud1=^J$<3>, cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K$<3>, 
+	civis=\E], cvvis=\E\072,
+	dch1=^\W$<5>, dl1=\034R$<15>, ed=\034Y$<3*>, el=^\Z, 
+	home=^^$<10>, ht=^Z, ich1=^\Q$<5>, il1=\034E$<15>, ind=^J, 
+	is2=^_.., kbs=^H, kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, 
+	kcuu1=^Ax\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r, 
+	kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, 
+	kf8=^Ah\r, kend=^Ak\r, khome=^A?\r,
+	knp=^Ao\r, kpp=^An\r, nel=^M^J, 
+	rev=\EH, rmacs=^O,
+	rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo, 
+	smso=^\H`, smul=^\HP, 
+
+#### IBM Unix consoles
+#
+
+# The following is a version of the ibm-pc entry distributed with PC/IX,
+# (Interactive Systems' System 3 for the Big Blue), modified by Richard
+# McIntosh at UCB/CSM.  The :pt: and :uc: have been removed from the original,
+# (the former is untrue, and the latter failed under UCB/man); standout and
+# underline modes have been added.  Note: this entry describes the "native"
+# capabilities of the PC monochrome display, without ANY emulation; most
+# communications packages (but NOT PC/IX connect) do some kind of emulation.
+pcix|PC/IX console, 
+	am, bw, eo, 
+	cols#80, lines#24, 
+	clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 
+	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, 
+	el=\E[K, home=\E[H, rmso=\E[m, rmul=\E[m, 
+	sgr0=\E[m, smso=\E[7m, smul=\E[4m, 
+
+# (ibmpcx: this entry used to be known as ibmx.
+# It formerly included the following extension capabilities:
+#	:GC=b:GL=v:GR=t:RT=^J:\
+#	:GH=\E[196g:GV=\E[179g:\
+#	:GU=\E[193g:GD=\E[194g:\
+#	:G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
+#	:CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
+#	:WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
+# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
+# ":kh=\E[Y:".  Added IBM-PC forms characters and highlights, they match
+# what was there before. -- esr)
+ibmpcx|xenix|ibmx|IBM PC xenix console display, 
+	am, msgr, OTbs,
+	cols#80, lines#25, 
+	clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C, 
+	cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 
+	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, 
+	il1=\E[L, kbs=^H, kcub1=\E[D, kcud1=\E[B, 
+	kcuf1=\E[C, kcuu1=\E[A, kend=\E[d, kf1=\E[K, 
+	kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e, 
+	kpp=\E[Z, use=klone+acs, use=klone+sgr,
+
+
+#### Masscomp consoles
+#
+# Masscomp has gone out of business.  Their product line was purchased by
+# comany in Georgia (US) called "XS International", parts and service may
+# still be available through them.
+#
+
+# (masscomp: ":MT:" changed to ":km:";  -- esr)
+masscomp|masscomp workstation console, 
+	km, mir, OTbs,
+	cols#80, it#8, lines#24,
+	clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 
+	dl1=\E[M, ed=\E[J, el=\E[K, ht=\t, il1=\E[L, 
+	is2=\EGc\EGb\EGw, kbs=^H, kcub1=\EOD, kcud1=\EOB, 
+	kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l, rmso=\E[m, 
+	rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu, 
+masscomp1|masscomp large screen version 1, 
+	cols#104, lines#36, 
+	use=masscomp,
+masscomp2|masscomp large screen version 2, 
+	cols#64, lines#21, 
+	use=masscomp,
+
+
+#### Sony NEWS workstations
+#
+
+# (news-unk: this had :KB=news: -- esr)
+news-unk|SONY NEWS vt100 emulator common entry, 
+	OTbs, OTpt, am, xenl, 
+	cols#80, 
+	OTnl=^J, 
+	OTrs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, bel=^G, 
+	blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, 
+	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 
+	if=/usr/lib/tabset/vt100, il=\E[%p1%dL, il1=\E[L, 
+	is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD, 
+	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, 
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, 
+	kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rc=\E8, 
+	rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, 
+	rmul=\E[m, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, 
+	smso=\E[7m, smul=\E[4m, 
+#
+# (news-29: this had :TY=ascii: --esr)
+news-29, 
+	lines#29, use=news-unk,
+# (news-29-euc: this had :TY=euc: --esr)
+news-29-euc, 
+	use=news-29,
+# (news-29-sjis: this had :TY=sjis: --esr)
+news-29-sjis, 
+	use=news-29,
+#
+# (news-33: this had :TY=ascii: --esr)
+news-33, 
+	lines#33, use=news-unk,
+# (news-33-euc: this had :TY=euc: --esr)
+news-33-euc, 
+	use=news-33,
+# (news-33-sjis: this had :TY=sjis: --esr)
+news-33-sjis, 
+	use=news-33,
+#
+# (news-42: this had :TY=ascii: --esr)
+news-42, 
+	lines#42, use=news-unk,
+# (news-42-euc: this had :TY=euc: --esr)
+news-42-euc, 
+	use=news-42,
+# (news-42-sjis: this had :TY=sjis: --esr)
+news-42-sjis, 
+	use=news-42,
+#
+#	NEWS-OS old termcap entry 
+#
+# (news-old-unk: this had :KB=news:TY=sjis: --esr)
+news-old-unk|SONY NEWS vt100 emulator common entry, 
+	OTbs, OTpt, am, xenl, 
+	cols#80, vt#3, 
+	OTnl=^J, OTrs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 
+	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, 
+	cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, 
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 
+	ed=\E[J, el=\E[K, home=\E[H, ht=^I, 
+	if=/usr/lib/tabset/vt100, kbs=^H, kcub1=\EOD, 
+	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 
+	kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, 
+	ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 
+	sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, 
+	smul=\E[4m, 
+#
+# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
+nwp512|news|nwp514|news40|vt100-bm|sony vt100 emulator 40 lines, 
+	OTbs, 
+	lines#40, 
+	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, use=news-old-unk,
+#
+# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
+nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
+	lines#42,
+	is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8, use=news-old-unk,
+#
+# (nwp-512-o: this had :KB=nwp410:DE=^H:  I interpret the latter as <OTbs>. --esr)
+nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines, 
+	OTbs, 
+	lines#40, 
+	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, use=news-old-unk,
+#
+# (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
+nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines, 
+	OTbs, 
+	lines#31, 
+	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, use=news-old-unk,
+#
+# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
+# also the alias vt100-bm.
+nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|sony vt100 emulator 33 lines, 
+	OTbs, 
+	lines#33, 
+	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8, use=news-old-unk,
+#
+# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
+nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|sony vt100 emulator 33 lines, 
+	OTbs, 
+	lines#31, 
+	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, use=news-old-unk,
+#
+# (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
+news28|sony vt100 emulator 28 lines, 
+	OTbs, 
+	lines#28, 
+	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8, use=news-old-unk,
+#
+# (news29: this had :TY=ascii:KB=nws1200:\ --esr)
+news29|news28-a|sony vt100 emulator 29 lines, 
+	lines#29, 
+	is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8, use=news-old-unk,
+#
+# (news511: this had :TY=sjis: --esr)
+nwp511|nwp-511|nwp-511 vt100, 
+	OTbs, OTpt, am, xenl, 
+	cols#80, lines#24, 
+	OTrs=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h, 
+	clear=\E[;H\E[2J$<20/>, cuf1=\E[C, 
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M, 
+	ed=\E[J$<30/>, el=\E[K$<3/>, 
+	flash=\E[?5h\200\200\200\200\200\200\200\200\200\200\200\200\200\E[?5l, 
+	il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, 
+	kf6=\E#W, khome=\E[H, ri=\EM$<5/>, rmso=\E[m$<2/>, 
+	rmul=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>, 
+# (news517: this had :TY=sjis:. --esr)
+nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows, 
+	eslok, hs, 
+	cols#80, lines#30, 
+	OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, 
+	is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 
+	tsl=\E[1$}\E[;%df, use=vt200,
+# (news517-w: this had :TY=sjis:. --esr)
+nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows, 
+	eslok, hs, 
+	cols#132, lines#50, 
+	OTi2=\E[2$~\n, 
+	OTrs=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, dsl=\E[1$~, 
+	fsl=\E[0$}, 
+	is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, 
+	tsl=\E[1$}\E[;%df, use=vt200,
+
+#### Obsolete virtual-terminal types.
+#
+
+# Columbus UNIX virtual terminal. This terminal also appears in 
+# UNIX 4.0 and successors as line discipline 1 (?), but is 
+# undocumented and does not really work quite right.
+cbunix|cb unix virtual terminal, 
+	OTbs, am, da, db, 
+	cols#80, lines#24, lm#0,  
+	bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 
+	cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL, 
+	el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB, 
+	kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, 
+	rmul=\Eb^A, smso=\Ea^D, smul=\Ea^A, 
+# (vremote: removed obsolete ":nl@:" -- esr)
+vremote|virtual remote terminal, 
+	am@, 
+	cols#79, 
+	use=cbunix,
+
+pty|4bsd pseudo teletype, 
+	smso=\Ea$, rmso=\Eb$, smul=\Ea!, rmul=\Eb!,
+	cup=\EG%p1%{32}%+%c%p2%{32}%+%c, use=cbunix,
+
+######## OTHER OBSOLETE TYPES
+#
+# These terminals are *long* dead -- these entries are retained for
+# historical interest only.
+#
+
+#### Obsolete non-ANSI software emulations
+#
+
+#### Avatar
+#
+# These entries attempt to describe Avatar, a terminal emulation used with
+# MS-DOS bulletin-board systems.  It was designed to give ANSI-like
+# capabilities, but with cheaper (shorter) control sequences.  Messy design,
+# excessively dependent on PC idiosyncracies, but apparently rather popular
+# in the BBS world.
+#
+# No color support.  Avatar doesn't fit either of the Tektronix or HP color
+# models that terminfo knows about.  An Avatar color attribute is the
+# low 7 bits of the IBM-PC display-memory attribute.  Bletch.
+#
+# I wrote these entries while looking at the Avatar spec.  I don't have
+# the facilities to test them.  Let me know if they work, or don't.
+#
+# Avatar escapes not used by these entries (because maybe you're smarter
+# and more motivated than I am and can figure out how to wrap terminfo
+# around some of them, and because they are weird enough to be funny):
+#				level 0:
+# ^L		-- clear window/reset current attribute to default
+# ^V^A%p1%c	-- set current color attribute, parameter decodes as follows:
+# 
+#      bit:         6   5   4   3   2   1   0
+#                   |       |   |   |       |
+#                   +---+---+   |   +---+---+
+#                       |       |       |
+#                       |       |  foreground color
+#                       |  foreground intensity
+#                  background color
+#				level 0+:
+# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c	-- scroll (p2,p3) to (p4,p5) up by p1 lines
+# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c	-- scroll (p2,p3) to (p4,p5) down by p1 lines
+# ^V^L%p1%c%p2%c%p3%c		-- clear p2 lines and p3 cols w/attr %p1 
+# ^V^M%p1%c%p2%c%p3%c%p4%c	-- fill p3 lines & p4 cols w/char p2+attr %p1 
+# (^V^L and ^V^M set the current attribute as a side-effect.)
+# ^V ^Y <a> [...] <c>	-- repeat pattern. <a> specifies the number of bytes
+#			   in the pattern, <c> the number of times the pattern
+#		  	   should be repeated. If either value is 0, no-op.
+#			   The pattern can contain Avatar console codes,
+#			   including other ^V ^Y patterns.
+#				level 1:
+# ^V^O		-- clockwise mode on; turn print direction right each time you
+#		   hit a window edge (yes, really).  Turned off by CR
+# ^V^P		-- no-op
+# ^V^Q%c	-- query the driver
+# ^V^R		-- driver reset
+# ^V^S		-- Sound tone (PC-specific)
+# ^V^T			-- change highlight at current cursor poition to %c
+# ^V^U%p1%c%p2%c	-- highlight window <a> with attribute <b>
+# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
+#			-- define window 
+#
+# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
+# (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
+# tell ncurses that the corresponding highlights exist; it should use <sgr>,
+# which is the only method that will actually work for multiple highlights.)
+avatar0|avatar terminal emulator level 0,
+	am, bce, msgr,
+	cols#80, it#8, lines#25,
+	blink=^A^V^?, bold=^V^A\020, cr=\r, cub1=^V^E, cud1=^V^D, cuf1=^V^F, 
+	cup=^V^H%p1%c%p2%c, cuu1=^V^C, el=^V^G, ind=\n, invis=^V^A\0, 
+	rep=^Y%p1%c%p2%d, rev=^A^V\160, rs2=^L, sgr0=^V^A\007,
+	sgr=^V^A%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p4%t{128}%|%;%?%p6%t%{16}%|%;,
+	smacs=, smso=^A^V\160, smul=^V\001,
+	use=klone+acs,
+# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
+avatar0+|avatar terminal emulator level 0+,
+	smir=^V^I, rmir=^V^J\0\0\0\0, 
+	dch1=^V^N, use=avatar0,
+# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
+avatar|avatar1|avatar terminal emulator level 1,
+	rmir=^V^P, cnorm=^V'\001, civis=^V'\002, cvvis=^V\003, 
+	il1=^V+, dl1=^V-, smam=^V$, rmam=^V", use=avatar0+,
+
+#### RBcomm
+#
+# RBComm is a lean and mean terminal emulator written by the Interrupt List
+# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
+# '90s), especially in the BBS world, and still has some loyal users due to
+# its very small memory footprint and to a cute macro language.
+rbcomm|IBM PC with RBcomm and EMACS keybindings, 
+	am, bw, mir, msgr, xenl, 
+	cols#80, it#8, lines#25, 
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 
+	civis=\E[?25l, clear=^L, cnorm=\E[?25h, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^C, cuf1=^B, 
+	cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, 
+	cvvis=\E[?25h, dch1=^W, dl=\E[%p1%dM, dl1=^Z, 
+	ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I, 
+	il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m, 
+	is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H, 
+	kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, 
+	nel=^M\ED, rc=\E8, rep=\030%p1%c%p2%c, rev=^R, 
+	ri=\EM, .rmacs=^O, rmcup=, rmdc=, rmir=^], rmkx=\E>, 
+	rmso=^U, rmul=^U, rs1=\017\E(B\E)0\025\E[?3l\E[>8g, 
+	sc=\E7, sgr0=\E[m, .smacs=^N, smcup=, smdc=, 
+	smir=^\, smkx=\E=, smso=^R, smul=^T, 
+rbcomm-nam|IBM PC with RBcomm without autowrap, 
+	am@, 
+	bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, 
+	is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H, 
+	kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
+rbcomm-w|IBM PC with RBcomm in 132 column mode, 
+	cols#132, 
+	bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, 
+	is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H, 
+	kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
+
+# CTRM terminal emulator
+# 1. underlining is not allowed with colors: first, is is simulated by 
+# black on white, second, it disables background color manipulations.
+# 2. BLINKING, REVERSE and BOLD are allowed with colors,
+# so we have to save their status in the static registers A, B and H
+# respectively, to be able to restore them when color changes
+# (because any color change turns off ALL attributes)
+# 3. <bold> and <rev> sequences alternate modes,
+# rather then simply  entering them.  Thus we have to check the
+# static register B and H to determine the status, before sending the 
+# escape sequence.
+# 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
+# and then reset colors
+# 5. implementation of the protect mode would badly penalize the performance.
+# we would have to use \E&bn sequence to turn off colors (as well as all
+# other attributes), and keep the status of protect mode in yet another
+# static variable.  If someone really needs this mode, they would have to
+# create another terminfo entry.
+# 6. original color-pair is white on black.
+# store the information about colors into static registers
+# 7. set foreground color.  it performs the following steps.
+#   1) turn off all attributes
+#   2) turn on the background and video attributes that have been turned
+#      on before (this information is stored in static registers X,Y,Z,A,B,H,D).
+#   3) turn on foreground attributes
+#   4) store information about foreground into U,V,W static registers
+# 8. turn on background: similar to turn on foreground above
+ctrm|C terminal emulator,
+	am, xon, bce,
+	cols#80, lh#0, lines#24, lm#0, lw#0, nlab#0, colors#8, pairs#63,
+	pb#19200, vt#6, ncv#2,
+	bel=^G, cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=\b,
+	cud1=\n, cuf1=\EC, cup=\E&a%p2%dc%p1%dY, cuu1=\EA,
+	dch1=\EP$<2>, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
+	ht=\t$<2>, hts=\E1, il1=\EL, ind=\n, ip=$<2>,
+	is2=\E&jA\r, kbs=\b, kcub1=\Eu\r, kcud1=\Ew\r,
+	kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r, kf2=\Eq\r,
+	kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
+	kf8=\Ew\r, khome=\Ep\r, rmir=\ER, rmkx=\E&jA, smir=\EQ,
+	smkx=\E&jB, smso=\E&dD, smul=\E&dD, tbc=\E3,
+	vpa=\E&a%p1%dY,
+	blink=\E&dA%{1}%PA,
+	rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;,
+	bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;,
+	smul=\E&dD,
+	sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH,
+	sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH
+		 %?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;
+		 %?%p4%t\E&dA%{1}%PA%;
+		 %?%p6%t\E&dH%{1}%PH%;
+		 %?%p2%t\E&dD%;,
+	op=\E&bn\E&bB\E&bG\E&bR
+	    %{0}%PX%{0}%PY%{0}%PZ
+	    %{1}%PW%{1}%PV%{1}%PU,
+	setf=\E&bn
+		%?%gA%t\E&dA%;
+		%?%gB%t\E&dB%;
+		%?%gH%t\E&dH%;
+		%?%gX%t\E&br%;
+		%?%gY%t\E&bg%;
+		%?%gZ%t\E&bb%;
+
+		%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW
+		%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV
+		%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
+	setb=\E&bn
+		%?%gA%t\E&dA%;
+		%?%gB%t\E&dB%;
+		%?%gH%t\E&dH%;
+		%?%gU%t\E&bR%;
+		%?%gV%t\E&bG%;
+		%?%gW%t\E&bB%;
+
+		%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ
+		%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY
+		%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
+
+# gs6300 - can't use blue foreground, it clashes with underline;
+# it's simulated with cyan
+# Bug: The <op> capability probably resets attributes.
+# (gs6300: commented out <rmln> (no <smln>) --esr)
+gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
+	am, msgr, xon, bce,
+	cols#80, it#8, lines#24, colors#8, pairs#63,
+	acsc=\,\,..--++``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
+	cr=\r, cub=\E[%p1%dD, cub1=\b, cud=\E[%p1%dB, cud1=\n,
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, .el1=\E[1K,
+	home=\E[H, ht=\t, ich=\E[%p1%d@, ich1=\E[@,
+	il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E[m, kbs=\b,
+	kcbt=^R\t, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+	kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
+	kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s,
+	kf8=\E[21s, khome=\E[H, mc4=\E[4i, mc5=\E[5i,
+	rev=\E[7m, ri=\E[L, rmacs=\E[10m, .rmln=\E|, rs1=\Ec,
+	sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
+	op=\E[?;m,
+	setf=\E[?%?%p1%{0}%=%t0
+		 %e%p1%{1}%=%t2
+		 %e%p1%{1}%-%d%;m,
+	setb=\E[?;%p1%dm,
+
+# From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
+# MS-Kermit with Heath-19 emulation mode enabled
+# (h19k: changed ":pt@:" to ":it@"
+h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin), 
+	am@, da, db, xt, 
+	it@, 
+	ht@, use=h19-u,
+
+# Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
+# Software (formerly Peripherals Computers & Supplies, Inc) of
+# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376.  They can
+# also be reached at support@synergy.com.
+versaterm|versaterm vt100 emulator for the macintosh, 
+	am, xenl, 
+	cols#80, it#8, lines#24, 
+	bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 
+	clear=\E[;H\E[2J$<50/>, cr=^M, 
+	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, 
+	cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, 
+	cuu1=\E[A$<2/>, dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, 
+	ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, 
+	ich1=\E[1@$<7/>, il1=\E[1L$<9/>, 
+	is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, 
+	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 
+	kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, 
+	rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100, 
+	ri=\EM$<5/>, rmkx=\E>\E[?1l, rmso=\E[m$<2/>, 
+	rmul=\E[m$<2/>, rs1=\E>, sc=\E7, sgr0=\E[m$<2/>, 
+	smkx=\E=\E[?1h, smso=\E[7m$<2/>, smul=\E[4m$<2/>, 
+
+# From: Rick Thomas <ihnp4!btlunix!rbt>
+# (xtalk: I added <rmam>/<smam> based on the init string.
+xtalk|IBM PC with xtalk communication program (versions up to 3.4),
+	am, mir, msgr, xon,
+	cols#80, it#8, lines#24, vt#3, xmc#1,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD,
+	cub1=\b, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
+	cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
+	cuu=\E[%p1%dA, cuu1=\E[A$<2>, dl1=\E[M$<99>,
+	ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
+	enacs=\E(B\E)0, home=\E[H, ht=\t, hts=\EH,
+	il1=\E[L$<99>, ind=\n, ka1=\EOq, ka3=\EOs, kb2=\EOr,
+	kbs=\b, kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB,
+	kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP,
+	kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
+	kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, ri=\EM$<5>,
+	rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m\s,
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m, smacs=^N,
+	smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s, tbc=\E[3g,
+
+# The official PC terminal emulator program of the AT&T Product Centers.
+# Note - insert mode commented out - doesn't seem to work on AT&T PC.
+simterm|attpc running simterm,
+	am,
+	cols#80, lines#24,
+	bel=^G, clear=\EH\EJ, cr=\r, cub1=\b, cud1=\EB,
+	cuf1=\EC, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
+	dch1=\ER, dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL,
+	ind=\n, rmcup=\EVE, .rmir=\EE, rmso=\E&d@, sgr0=\E&d@, smcup=\EVS,
+	.smir=\EQ, smso=\E&dB,
+
+#### Miscellaneous obsolete terminals, manufacturers unknown
+#
+# If you have any information about these (like, a manufacturer's name, 
+# and a date on the serial-number plate) please send it!
+
+cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars, 
+	am, OTbs,
+	cols#73, lines#36, 
+	clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, 
+cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars, 
+	am, OTbs,
+	cols#85, lines#39, 
+	clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3, 
+	kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, 
+	kf3=\E7, kf4=\E8, rmso=\Em^C, smso=\Em^L, 
+cops10|cops|cops-10|cops 10, 
+	am, bw, 
+	cols#80, lines#24, 
+	bel=^G, clear=^X$<30/>, cr=^M, cub1=^H, cud1=^J, 
+	cuf1=^L, cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 
+	ed=^W, el=^V, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 
+	kcuf1=^L, kcuu1=^K, khome=^Y, 
+# (d132: removed duplicate :ic=\E5:,
+# merged in capabilities from a BRL entry -- esr)
+d132|datagraphix|datagraphix 132a, 
+	da, db, in, 
+	cols#80, lines#30, 
+	bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J, cuf1=\EL, 
+	cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex, dch1=\E6, home=\ET,
+	ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
+	nel=^M^J, ri=\Ew, 
+# The d800 was an early portable terminal from c.1984-85 that looked a lot
+# like the original Compaq `lunchbox' portable (but no handle).  It had a vt220
+# mode (which is what this entry looks like) and several other lesser-known
+# emulations.
+d800|Direct 800/A, 
+	am, da, db, msgr, xhp, OTbs,
+	cols#80, it#8, lines#24, 
+	acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
+	bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H, 
+	cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu1=\E[A, cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, 
+	ind=\ED, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
+	kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
+	kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, ri=\EM, 
+	rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smacs=\E[1m, 
+	smso=\E[7m, smul=\E[4m, 
+digilog|digilog 333, 
+	cols#80, lines#16, OTbs,
+	bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O,
+	el=^X, home=^N, ind=^J, 
+# The DWK was a terminal manufactured in the Soviet Union c.1986
+dwk|dwk-vt|dwk terminal,
+	am,
+	cols#80, it#8, lines#24,
+	acsc=lJmFkCjXtEuPv\\wKqUxWnNo~s_`+a\072f'g#~_\054Q+\^.M-Sh#i#0\177,
+	bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J,
+	cuf1=\EC, cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA,
+	dch1=\EP, ed=\EJ, el=\EK, home=\EH, ht=^I,
+	ich1=\EQ, ind=^J, kbs=\177, kcub1=\ED, kcud1=\EB,
+	kcuf1=\EC, kcuu1=\EA, kdch1=\Ee, kf1=\Ef1,
+	kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
+	kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed,
+	knp=\Eh, kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES,
+	rmacs=\EG, rmso=\EX, sgr0=\EX, smacs=\EF, smso=\ET,
+env230|envision230|envision 230 graphics terminal, 
+	xenl@, 
+	mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+	sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 
+	use=vt100, 
+# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
+# coupler attached, the whole rig fitting in a suitcase and more or less
+# portable.  Hot stuff for c.1977 :-) -- esr
+ep48|ep4080|execuport 4080, 
+	am, os, OTbs,
+	cols#80, 
+	bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J, 
+ep40|ep4000|execuport 4000, 
+	cols#136, use=ep4080,
+# Adam Thompson <thompson@xanth.magic.mb.ca> tells us:
+# Informer series - these are all portable units, resembling older
+# automatic bread-baking machines.  The terminal looks like a `clamshell'
+# design, but isn't.  The structure is similar to the Direct terminals,
+# but only half the width.  The entire unit is only about 10" wide.
+# It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
+# keyboard.  All the keys are crammed together, much like some laptop
+# PCs today, but perhaps less well organized...all these units have a
+# bewildering array of plugs on the back, including a built-in modem.
+# The 305 was a color version of the 304; the 306 and 307 were mono and
+# color terminals built for IBM bisync protocols.
+# From: Paul Leondis <unllab@amber.berkeley.edu>
+ifmr|Informer D304, 
+	am, OTbs,
+	cols#80, lines#24, 
+	clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC, 
+	cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, 
+	dch1=\E\\, ed=\E/, el=\EQ, home=\EH, ich1=\E[, 
+	ri=\En, rmso=\EK, sgr0=\EK, smso=\EJ, 
+# Entry largely based on wy60 and has the features of wy60ak.
+opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
+	is2=\E`:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A^?\Ezz'\E[B^?\Ezz(\E[D^?\Ezz)\E[C^?\Ezz<\E[Q^?\Ezz`\E[F^?\EA1*\EZH12,
+	kbs=\b, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+	kcuu1=\E[A,
+	smcup=\Ezz&\E[A^?\Ezz'\E[B^?\Ezz(\E[D^?\Ezz)\E[C^?\Ezz<\E[Q^?, rmcup=,
+	tsl=\EF, fsl=^M,
+	kend=\E[F,
+	am, hs, mir, ul, xon,
+	cols#80, lines#24,  
+	bel=^G, blink=\EG2, kcbt=\EI, cbt=\EI, clear=\E*$<100>, cr=^M,
+	cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC,
+	cuu1=^K, dch1=\EW$<11>, dl1=\ER$<5>, dsl=\Ez(^M, ed=\EY$<100>,
+	el=\ET, fsl=^M, ht=^I$<5>, hts=\E1, if=/usr/share/tabset/std,
+	il1=\EE$<4>, ind=\n,
+	ip=$<3>,
+	kcbt=\EI, 
+	kdch1=\EW, kdl1=\ER, kel=\ET, kent=\E7,
+	ked=\EY, 
+	kf1=^A@^M, kf2=^AA^M, kf3=^AB^M, kf4=^AC^M, kf5=^AD^M, kf6=^AE^M,
+	kf7=^AF^M, kf8=^AG^M, kf9=^AH^M, kf10=^AI^M, kf11=^AJ^M, kf12=^AK^M,
+	kf13=^AL^M, kf14=^AM^M, kf15=^AN^M, kf16=^AO^M,  
+	rmir=\Er, 
+	civis=\E`0,
+	cnorm=\E`1,
+	acsc=0wa_h[jukslrmqnxqzttuyv]wpxv,
+	rmacs=\EH^C,
+	smacs=\EH^B,
+	knp=\EK,
+	kpp=\EJ,
+	sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH^B%e\EH^C%;\EG%'0'%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
+	sgr0=\E(\EH^C\EG0\EcD,
+	kich1=\EQ, kil1=\EE, km, kprt=\EP, krpl=\Er,
+	lh#1, lw#8, mc0=\EP, mc4=^T, mc5=^R, mir, msgr,
+	nel=^M^J$<3>, nlab#8, pfloc=\EZ2%p1%'?'%+%c%p2%s\177,
+	pfx=\EZ1%p1%'?'%+%c%p2%s\177, pln=\Ez%p1%'/'%+%c%p2%s^M, prot=\E),
+	ri=\Ej$<7>, rmam=\Ed., rmln=\EA11,
+	rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
+	rs3=\EwG\Ee($<150>,
+	smam=\Ed/, smln=\EA10,
+	smxon=\Ec21, tbc=\E0, uc=\EG8%p1%c\EG0,
+	wsl#80, .xon,
+	bw, dim=\EGp,
+	kHOM=\E{,
+	smir=\Eq, tsl=\Ez(,
+	home=^^$<2>, khome=^^,
+	use=adm+sgr,
+teletec|Teletec Datascreen, 
+	am, OTbs,
+	cols#80, lines#24, 
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K, 
+	home=^^, ind=^J, 
+# From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
+# This description is for the LANPAR Technologies VISION 3220
+# terminal from 1984/85.  The function key definitions k0-k5 represent the
+# edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
+# NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
+# (v3220: removed obsolete ":kn#10:",
+# I added <rmam>/<smam> based on the init string -- esr)
+v3220|LANPAR Vision II model 3220/3221/3222, 
+	am, mir, xenl, OTbs,
+	cols#80, it#8, lines#24, 
+	clear=\E[H\E[J, cub1=^H, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
+	cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, 
+	ht=\t, il1=\E[L, is2=\E>\E[?3l\E[?7h\E[?8h\E[p, 
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
+	kf0=\E[1~, kf1=\E[2~, kf2=\E[3~, kf3=\E[4~, 
+	kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ, 
+	kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, 
+	rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 
+	smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, 
+
+######## ICH/ICH1 VERSUS RMIR/SMIR
+#
+# Some non-curses applications get confused if both ich/ich1 and rmir/smir
+# are present; the symptom is doubled characters in an update using insert.
+# These applications are technically correct; in both 4.3BSD termcap and
+# terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
+# unless the terminal needs both.  To my knowledge, no terminal still in this
+# file requires both other than the very obsolete dm2500.
+#
+# For ncurses-based applications this is not a problem, as ncurses uses
+# one or the other as appropriate but never mixes the two.  Therefore we
+# have not corrected entries like `linux' and `xterm' that specify both.
+# If you see doubled characters from these, use the linux-nic and xterm-nic
+# entries that suppress ich/ich1.  And upgrade to ncurses!
+#
+
+######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
+#
+# ANSI X3.64 has been withdrawn and replaced by ECMA-48.  The ISO 6429 and
+# ECMA-48 standards are said to be almost identical, but are not the same
+# as X3.64 (though for practical purposes they are close supersets of it).
+#
+# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
+# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
+# Coded Character Sets"), include your snail-mail address, and you should
+# receive the document in due course.  Don't expect an email acknowledgement.
+#
+# Related standards include "X3.4-1977: American National Standard Code for
+# Information Interchange" (the ASCII standard) and "X3.41.1974: 
+# Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
+# American National Standard for Information Interchange."  I believe (but
+# am not certain) that these are effectively identical to ECMA-6 and ECMA-35
+# respectively. 
+#
+
+#### VT100/ANSI/ECMA-48
+#
+# ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
+# and ECMA-48 Control Functions for Coded Character Sets.
+# 
+# Much of the content of this comment is adapted from a table prepared by
+# Richard Shuford, based on a 1984 Byte article.  Terminfo correspondences,
+# discussion of some terminfo-related issues, and updates to capture ECMA-48
+# have been added.  Control functions described in ECMA-48 only are tagged
+# with * after their names.
+#
+# The table is a complete list of the defined ANSI X3.64/ECMA-48 control
+# sequences.  In the main table, \E stands for an escape (\033) character,
+# SPC for space.  Pn stands for a single numeric parameter to be inserted
+# in decimal ASCII.  Ps stands for a list of such parameters separated by
+# semicolons.  Parameter meanings for most parametrized sequences are
+# decribed in the notes.
+#
+# Sequence     Sequence                             Parameter   or
+# Mnemonic     Name              Sequence           Value      Mode   terminfo
+# -----------------------------------------------------------------------------
+# APC  Applicatn Program Command \E _                -         Delim  -
+# BEL  Bell *                    ^G                  -         -      bel
+# BPH  Break Permitted Here *    \E B                -         *      -
+# BS   Backpace *                ^H                  -         EF     -
+# CAN  Cancel *                  ^X                  -         -      -   (A)
+# CBT  Cursor Backward Tab       \E [ Pn Z           1         eF     cbt
+# CCH  Cancel Previous Character \E T                -         -      -
+# CHA  Cursor Horizntal Absolute \E [ Pn G           1         eF     hpa (B)
+# CHT  Cursor Horizontal Tab     \E [ Pn I           1         eF     tab (C)
+# CMD  Coding Method Delimiter * \E
+# CNL  Cursor Next Line          \E [ Pn E           1         eF     nel (D)
+# CPL  Cursor Preceding Line     \E [ Pn F           1         eF     -
+# CPR  Cursor Position Report    \E [ Pn ; Pn R      1, 1      -      -   (E)
+# CSI  Control Sequence Intro    \E [                -         Intro  -
+# CTC  Cursor Tabulation Control \E [ Ps W           0         eF     -   (F)
+# CUB  Cursor Backward           \E [ Pn D           1         eF     cub
+# CUD  Cursor Down               \E [ Pn B           1         eF     cud
+# CUF  Cursor Forward            \E [ Pn C           1         eF     cuf
+# CUP  Cursor Position           \E [ Pn ; Pn H      1, 1      eF     cup (G)
+# CUU  Cursor Up                 \E [ Pn A           1         eF     cuu
+# CVT  Cursor Vertical Tab       \E [ Pn Y           -         eF     -   (H)
+# DA   Device Attributes         \E [ Pn c           0         -      -
+# DAQ  Define Area Qualification \E [ Ps o           0         -      -
+# DCH  Delete Character          \E [ Pn P           1         eF     dch
+# DCS  Device Control String     \E P                -         Delim  -
+# DL   Delete Line               \E [ Pn M           1         eF     dl
+# DLE  Data Link Escape *        ^P                  -         -      -
+# DMI  Disable Manual Input      \E \                -         Fs     -
+# DSR  Device Status Report      \E [ Ps n           0         -      -   (I)
+# DTA  Dimension Text Area *     \E [ Pn ; Pn SPC T  -         PC     -
+# EA   Erase in Area             \E [ Ps O           0         eF     -   (J)
+# ECH  Erase Character           \E [ Pn X           1         eF     ech
+# ED   Erase in Display          \E [ Ps J           0         eF     ed  (J)
+# EF   Erase in Field            \E [ Ps N           0         eF     -
+# EL   Erase in Line             \E [ Ps K           0         eF     el  (J)
+# EM   End of Medium *           ^Y                  -         -      -
+# EMI  Enable Manual Input       \E b                          Fs     -
+# ENQ  Enquire                   ^E                  -         -      -
+# EOT  End Of Transmission       ^D                  -         *      -
+# EPA  End of Protected Area     \E W                -         -      -   (K)
+# ESA  End of Selected Area      \E G                -         -      -
+# ESC  Escape                    ^[                  -         -      -
+# ETB  End Transmission Block    ^W                  -         -      -
+# ETX  End of Text               ^C                  -         -      -
+# FF   Form Feed                 ^L                  -         -      -
+# FNK  Function Key *            \E [ Pn SPC W       -         -      -
+# GCC  Graphic Char Combination* \E [ Pn ; Pn SPC B  -         -      -
+# FNT  Font Selection            \E [ Pn ; Pn SPC D  0, 0      FE     -
+# GSM  Graphic Size Modify       \E [ Pn ; Pn SPC B  100, 100  FE     -   (L)
+# GSS  Graphic Size Selection    \E [ Pn SPC C       none      FE     -
+# HPA  Horz Position Absolute    \E [ Pn `           1         FE     -   (B)
+# HPB  Char Position Backward    \E [ j              1         FE     -
+# HPR  Horz Position Relative    \E [ Pn a           1         FE     -   (M)
+# HT   Horizontal Tab *          ^I                  -         FE     -   (N)
+# HTJ  Horz Tab w/Justification  \E I                -         FE     -
+# HTS  Horizontal Tab Set        \E H                -         FE     hts
+# HVP  Horz & Vertical Position  \E [ Pn ; Pn f      1, 1      FE     -   (G)
+# ICH  Insert Character          \E [ Pn @           1         eF     ich
+# IDCS ID Device Control String  \E [ SPC O          -         *      -
+# IGS  ID Graphic Subrepertoire  \E [ SPC M          -         *      -
+# IL   Insert Line               \E [ Pn L           1         eF     il
+# IND  Index                     \E D                -         FE     -
+# INT  Interrupt                 \E a                -         Fs     -
+# JFY  Justify                   \E [ Ps SPC F       0         FE     -
+# IS1  Info Separator #1 *       ^_                  -         *      -
+# IS2  Info Separator #1 *       ^^                  -         *      -
+# IS3  Info Separator #1 *       ^]                  -         *      -
+# IS4  Info Separator #1 *       ^\                  -         *      -
+# LF   Line Feed                 ^J                  -         -      -
+# LS1R Locking Shift Right 1 *   \E ~                -         -      -
+# LS2  Locking Shift 2 *         \E n                -         -      -
+# LS2R Locking Shift Right 2 *   \E }                -         -      -
+# LS3  Locking Shift 3 *         \E o                -         -      -
+# LS3R Locking Shift Right 3 *   \E |                -         -      -
+# MC   Media Copy                \E [ Ps i           0         -      -   (S)
+# MW   Message Waiting           \E U                -         -      -
+# NAK  Negative Acknowledge *    ^U                  -         *      -
+# NBH  No Break Here *           \E C                -         -      -
+# NEL  Next Line                 \E E                -         FE     nel (D)
+# NP   Next Page                 \E [ Pn U           1         eF     -
+# NUL  Null *                    ^@                  -         -      -
+# OSC  Operating System Command  \E ]                -         Delim  -
+# PEC  Pres. Expand/Contract *   \E Pn SPC Z         0         -      -
+# PFS  Page Format Selection *   \E Pn SPC J         0         -      -
+# PLD  Partial Line Down         \E K                -         FE     -   (T)
+# PLU  Partial Line Up           \E L                -         FE     -   (U)
+# PM   Privacy Message           \E ^                -         Delim  -
+# PP   Preceding Page            \E [ Pn V           1         eF     -
+# PPA  Page Position Absolute *  \E [ Pn SPC P       1         FE     -
+# PPB  Page Position Backward *  \E [ Pn SPC R       1         FE     -
+# PPR  Page Position Forward *   \E [ Pn SPC Q       1         FE     -
+# PTX  Parallel Texts *          \E [ \              -         -      -
+# PU1  Private Use 1             \E Q                -         -      -
+# PU2  Private Use 2             \E R                -         -      -
+# QUAD Typographic Quadding      \E [ Ps SPC H       0         FE     -
+# REP  Repeat Char or Control    \E [ Pn b           1         -      rep
+# RI   Reverse Index             \E M                -         FE     -   (V)
+# RIS  Reset to Initial State    \E c                -         Fs     -
+# RM   Reset Mode *              \E [ Ps l           -         -      -   (W)
+# SACS Set Add. Char. Sep. *     \E [ Pn SPC /       0         -      -
+# SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ]       0         -      -   (X)
+# SCI  Single-Char Introducer    \E Z                -         -      -
+# SCO  Sel. Char. Orientation *  \E [ Pn ; Pn SPC k  -         -      -
+# SCS  Set Char. Spacing *       \E [ Pn SPC g       -         -      -
+# SD   Scroll Down               \E [ Pn T           1         eF     rin
+# SDS  Start Directed String *   \E [ Pn ]           1         -      -
+# SEE  Select Editing Extent     \E [ Ps Q           0         -      -   (Y)
+# SEF  Sheet Eject & Feed *      \E [ Ps ; Ps SPC Y  0,0       -      -
+# SGR  Select Graphic Rendition  \E [ Ps m           0         FE     sgr (O)
+# SHS  Select Char. Spacing *    \E [ Ps SPC K       0         -      -
+# SI   Shift In                  ^O                  -         -      -   (P)
+# SIMD Sel. Imp. Move Direct. *  \E [ Ps ^           -         -      -
+# SL   Scroll Left               \E [ Pn SPC @       1         eF     -
+# SLH  Set Line Home *           \E [ Pn SPC U       -         -      -
+# SLL  Set Line Limit *          \E [ Pn SPC V       -         -      -
+# SLS  Set Line Spacing *        \E [ Pn SPC h       -         -      -
+# SM   Select Mode               \E [ Ps h           none      -      -   (W)
+# SO   Shift Out                 ^N                  -         -      -   (Q)
+# SOH  Start Of Heading *        ^A                  -         -      -
+# SOS  Start of String *         \E X                -         -      -
+# SPA  Start of Protected Area   \E V                -         -      -   (Z)
+# SPD  Select Pres. Direction *  \E [ Ps ; Ps SPC S  0,0       -      -
+# SPH  Set Page Home *           \E [ Ps SPC G       -         -      -
+# SPI  Spacing Increment         \E [ Pn ; Pn SPC G  none      FE     -
+# SPL  Set Page Limit *          \E [ Ps SPC j       -         -      -
+# SPQR Set Pr. Qual. & Rapid. *  \E [ Ps SPC X       0         -      -
+# SR   Scroll Right              \E [ Pn SPC A       1         eF     -
+# SRCS Set Reduced Char. Sep. *  \E [ Pn SPC f       0         -      -
+# SRS  Start Reversed String *   \E [ Ps [           0         -      -
+# SSA  Start of Selected Area    \E F                -         -      -
+# SSU  Select Size Unit *        \E [ Pn SPC I       0         -      -
+# SSW  Set Space Width *         \E [ Pn SPC [       none      -      -
+# SS2  Single Shift 2 (G2 set)   \E N                -         Intro  -
+# SS3  Single Shift 3 (G3 set)   \E O                -         Intro  -
+# ST   String Terminator         \E \                -         Delim  -
+# STAB Selective Tabulation *    \E [ Pn SPC ^       -         -      -
+# STS  Set Transmit State        \E S                -         -      -
+# STX  Start pf Text *           ^B                  -         -      -
+# SU   Scroll Up                 \E [ Pn S           1         eF     indn
+# SUB  Substitute *              ^Z                  -         -      -
+# SVS  Select Line Spacing *     \E [ Pn SPC \       1         -      -
+# SYN  Synchronous Idle *        ^F                  -         -      -
+# TAC  Tabul. Aligned Centered * \E [ Pn SPC b       -         -      -
+# TALE Tabul. Al. Leading Edge * \E [ Pn SPC a       -         -      -
+# TATE Tabul. Al. Trailing Edge* \E [ Pn SPC `       -         -      -
+# TBC  Tab Clear                 \E [ Ps g           0         FE     tbc
+# TCC  Tabul. Centered on Char * \E [ Pn SPC c       -         -      -
+# TSR  Tabulation Stop Remove  * \E [ Pn SPC d       -         FE     -
+# TSS  Thin Space Specification  \E [ Pn SC E        none      FE     -
+# VPA  Vert. Position Absolute   \E [ Pn d           1         FE     vpa
+# VPB  Line Position Backward *  \E [ Pn k           1         FE     -
+# VPR  Vert. Position Relative   \E [ Pn e           1         FE     -   (R)
+# VT   Vertical Tabulation *     ^K                  -         FE     -
+# VTS  Vertical Tabulation Set   \E J                -         FE     -
+# 
+# ---------------------------------------------------------------------------
+#
+# Notes:
+#
+# Some control characters are listed in the ECMA-48 standard without 
+# being assigned functions relevant to terminal control there (they 
+# referred to other standards such as ISO 1745 or ECMA-35).  They are listed
+# here anyway for completeness.
+#
+# (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
+#
+# (B) There seems to be some confusion abroad between CHA and HPA.  Most
+# `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
+# the capability (hpa).  ECMA-48 calls this "Cursor Character Absolute" but
+# preserved the CHA abbreviation.
+#
+# (C) CHT corresponds to terminfo (tab).  Usually it has the value ^I.
+# Occasionally (as on, for example, certain HP terminals) this has the HTJ
+# value.  ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
+# CHT abbreviation.
+#
+# (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
+#
+# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR 
+# abbreviation.
+# 
+# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
+# char tab, 3 = clear line tab, 4 = clear all char tabs on current line, 
+# 5 = clear all char tabs, 6 = clear all line tabs.
+#
+# (G) CUP and HVP are identical in effect.  Some ANSI.SYS versions accept
+# HVP, but always allow CUP as an alternate.  ECMA-48 calls HVP "Character
+# Position Absolute" but retains the HVP abbreviation.
+#
+# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
+# abbreviation.
+#
+# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
+# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
+# DSR, 6 = request CPR response.
+#
+# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
+# 1 = clear from beginning, 2 = clear.
+# 
+# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
+#
+# (L) The GSM parameters are vertical and horizontal parameters to scale by.
+#
+# (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
+# use CUF for this function and ignore HPR.  ECMA-48 calls this "Character
+# Position Relative" but retains the HPR abbreviation.
+#
+# (N) ECMA-48 calls this "Character Tabulation" but retains the HT
+# abbreviation.
+#
+# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
+# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
+# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
+# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
+# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
+# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
+# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
+# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
+# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
+# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
+# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
+# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
+# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
+# 61-65 = variable highlights for ideograms.
+#
+# (P) SI is also called LSO, Locking Shift Zero.
+#
+# (Q) SI is also called LS1, Locking Shift One.
+#
+# (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
+# use CUD for this function and ignore VPR.  ECMA calls it `Line Position
+# Absolute' but retains the VPA abbreviation.
+#
+# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
+# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
+# from secondary aux device, 4 = stop relay to primary aux device, 5 = 
+# start relay to primary aux device, 6 = stop relay to secondary aux device,
+# 7 = start relay to secondary aux device.
+#
+# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
+# abbreviation.
+#
+# (U) ECMA-48 calls this "Partial Line Backward" but retains the PLD
+# abbreviation.
+#
+# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
+#
+# (W) RM/SM modes are as follows: 1 = Guarder Area Transfer Mode (GATM), 
+# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM), 
+# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
+# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
+# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM), 
+# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
+# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM), 
+# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
+# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
+# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
+# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
+# Zero Default Mode (ZDM).  The EBM and LF/NL modes have actually been removed
+# from ECMA-48's 5th edition but are listed here for reference.
+#
+# (X) Select Alternate Presentation Variants is used only for non-Latin
+# alphabets.
+#
+# (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
+#
+# (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
+# abbreviation.
+#
+# ---------------------------------------------------------------------------
+# 
+# Abbreviations:
+#
+# Intro  an Introducer of some kind of defined sequence; the normal 7-bit
+#        X3.64 Control Sequence Introducer is the two characters "Escape ["
+# 
+# Delim  a Delimiter
+# 
+# x/y    identifies a character by position in the ASCII table (column/row)
+# 
+# eF     editor function (see explanation)
+# 
+# FE     format effector (see explanation)
+#
+# F      is a Final character in
+#             an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
+#             a control sequence (F from 4/0 to 7/14)
+# 
+# Gs     is a graphic character appearing in strings (Gs ranges from
+#        2/0 to 7/14) in the ASCII table
+# 
+# Ce     is a control represented as a single bit combination in the C1 set
+#        of controls in an 8-bit character set
+# 
+# C0     the familiar set of 7-bit ASCII control characters
+# 
+# C1     roughly, the set of control chars available only in 8-bit systems.
+#        This is too complicated to explain fully here, so read Jim Fleming's
+#        article in the February 1983 BYTE, especially pages 214 through 224.
+# 
+# Fe     is a Final character of a 2-character Escape sequence that has an
+#        equivalent representation in an 8-bit environment as a Ce-type
+#        (Fe ranges from 4/0 to 5/15)
+# 
+# Fs     is a Final character of a 2-character Escape sequence that is
+#        standardized internationally with identical representation in 7-bit
+#        and 8-bit environments and is independent of the currently
+#        designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
+# 
+# I      is an Intermediate character from 2/0 to 2/15 (inclusive) in the
+#        ASCII table
+# 
+# P      is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
+#        table
+# 
+# Pn     is a numeric parameter in a control sequence, a string of zero or
+#        more characters ranging from 3/0 to 3/9 in the ASCII table
+# 
+# Ps     is a variable number of selective parameters in a control sequence
+#        with each selective parameter separated from the other by the code
+#        3/11 (which usually represents a semicolon); Ps ranges from
+#        3/0 to 3/9 and includes 3/11
+#
+# *      Not relevant to terminal control, listed for completeness only.
+# 
+# Format Effectors versus Editor Functions
+# 
+# A format effector specifies how following output is to be displayed.
+# An editor function allows you to modify the display.  Informally
+# format effectors may be destructive; format effectors should not be.
+# 
+# For instance, a format effector that moves the "active position" (the 
+# cursor or equivalent) one space to the left would be useful when you want to
+# create an overstrike, a compound character made of two standard characters
+# overlaid. Control-H, the Backspace character, is actually supposed to be a
+# format effector, so you can do this. But many systems use it in a
+# nonstandard fashion, as an editor function, deleting the character to the
+# left of the cursor and moving the cursor left. When Control-H is assumed to
+# be an editor function, you cannot predict whether its use will create an
+# overstrike unless you also know whether the output device is in an "insert
+# mode" or an "overwrite mode". When Control-H is used as a format effector,
+# its effect can always be predicted. The familiar characters carriage
+# return, linefeed, formfeed, etc., are defined as format effectors.
+#
+# NOTES ON THE DEC VT100 IMPLEMENTATION
+# 
+# Control sequences implemented in the VT100 are as follows:
+# 
+#      CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
+#      LNM, NEL, RI, RIS, RM, SGR, SM, TBC
+# 
+# plus several private DEC commands.
+# 
+# Erasing parts of the display (EL and ED) in the VT100 is performed thus:
+# 
+#      Erase from cursor to end of line           Esc [ 0 K    or Esc [ K
+#      Erase from beginning of line to cursor     Esc [ 1 K
+#      Erase line containing cursor               Esc [ 2 K
+#      Erase from cursor to end of screen         Esc [ 0 J    or Esc [ J
+#      Erase from beginning of screen to cursor   Esc [ 1 J
+#      Erase entire screen                        Esc [ 2 J
+#
+# Some brain-damaged terminal/emulators respond to Esc [ J as if it were
+# Esc [ 2 J, but this is wrong; the default is 0.
+# 
+# The VT100 responds to receiving the DA (Device Attributes) control
+# 
+#      Esc [ c    (or Esc [ 0 c)
+# 
+# by transmitting the sequence
+# 
+#      Esc [ ? l ; Ps c
+# 
+# where Ps is a character that describes installed options.
+# 
+# The VT100's cursor location can be read with the DSR (Device Status
+# Report) control
+# 
+#      Esc [ 6 n
+# 
+# The VT100 reports by transmitting the CPR sequence
+# 
+#      Esc [ Pl ; Pc R
+# 
+# where Pl is the line number and Pc is the column number (in decimal).
+# 
+# The specification for the DEC VT100 is document EK-VT100-UG-003.
+
+#### ANSI.SYS
+# 
+# Here is a description of the color and attribute controls supported in the
+# the ANSI.SYS driver under MS-DOS.  Most console drivers and ANSI
+# terminal emulators for Intel boxes obey these.  They are a proper subset
+# of the ECMA-48 escapes.
+#
+# 0	all attributes off
+# 1	foreground bright
+# 4	underscore on
+# 5	blink on/background bright (not reliable with brown)
+# 7	reverse-video
+# 8	set blank (non-display)
+# 10	set primary font
+# 11	set first alternate font (on PCs, display ROM characters 1-31)
+# 12	set second alternate font (on PCs, display IBM high-half chars)
+#
+#			Color attribute sets
+# 3n	set foreground color       / 0=black, 1=red,     2=green, 3=brown,
+# 4n	set background color       \ 4=blue,  5=magenta, 6=cyan,  7=white
+# Bright black becomes gray.  Bright brown becomes yellow,
+# These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
+#
+# * If the 5 attribute is on and you set a background color (40-47) it is
+#   supposed to enable bright background.
+#
+# * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
+#   when you try to set a "bright brown" (yellow) background with attribute
+#   5 (you get a blinking yellow foreground instead).  A few displays
+#   (including the System V console) support an attribute 6 that undoes this
+#   braindamage (this is required by iBCS2).
+#
+# * Some older versions of ANSI.SYS have a bug that causes thems to require
+#   ESC [ Pn k as EL rather than the ANSI ESC [ Pn K.  (This is not ECMA-48
+#   compatible.)
+
+#### Intel Binary Compatibility Standard
+#
+# For comparison, here are the capabilities implied by the Intel Binary 
+# Compatibility Standard for UNIX systems (Intel order number 468366-001).
+# These recommendations are optional.  IBCS2 allows the leading escape to
+# be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
+# the ANSI X.364/ISO 6429/ECMA-48 standard.  Here are the iBCS2 capabilities
+# (as described in figure 9-3 of the standard).  Those expressed in the ibcs2
+# terminfo entry are followed with the corresponding capability in parens:
+#
+#	CSI <n>k		disable (n=0) or enable (n=1) keyclick
+#	CSI 2h   		lock keyboard
+#	CSI 2i  		send screen as input
+#	CSI 2l  		unlock keyboard
+#	CSI 6m  		enable background color intensity
+#	CSI <0-2>c		reserved
+#	CSI <0-59>m		select graphic rendition
+#	CSI <n>;<m>H	(cup)	cursor to line n and column m
+#	CSI <n>;<m>f		cursor to line n and column m
+#	CSI <n>@	(ich)	insert characters
+#	CSI <n>A	(cuu)	cursor up n lines
+#	CSI <n>B	(cud)	cursor down n lines
+#	CSI <n>C	(cuu)	cursor right n characters
+#	CSI <n>D	(cud)	cursor left n characters
+#	CSI <n>E		cursor down n lines and in first column
+#	CSI <n>F		cursor up n lines and in first column
+#	CSI <n>G	(hpa)	position cursor at column n-1
+#	CSI <n>J	(ed)	erase in display
+#	CSI <n>K	(el)	erase in line
+#	CSI <n>L	(il)	insert line(s)
+#	CSI <n>P	(dch)	delete characters
+#	CSI <n>S	(indn)	scroll up n lines
+#	CSI <n>T	(rin)	scroll down n lines
+#	CSI <n>X	(ech)	erase characters
+#	CSI <n>Z	(cbt)	back up n tab stops
+#	CSI <n>`		cursor to column n on line
+#	CSI <n>a	(cuu)	cursor right n characters
+#	CSI <n>d	(vpa)	cursor to line n
+#	CSI <n>e		cursor down n lines and in first column
+#	CSI <n>g	(cbt)	clear all tabs
+#	CSI <n>z		make virtual terminal n active
+#	CSI ?7h 	(smam)	turn automargin on
+#	CSI ?7l 	(rmam)	turn automargin off
+#	CSI s     		save cursor position
+#	CSI u   		restore cursor position to saved value
+#	CSI =<c>A		set overscan color
+#	CSI =<c>F		set normal foreground color
+#	CSI =<c>G		set normal background color
+#	CSI =<c>H		set reverse foreground color
+#	CSI =<c>I		set reverse foreground color
+#	CSI =<c>J		set graphic foreground color
+#	CSI =<c>K		set graphic foreground color
+#	CSI =<n>g	(dispc) display n from alternate graphics character set
+#	CSI =<p>;<d>B		set bell parameters
+#	CSI =<s>;<e>C		set cursor parameters
+#	CSI =<x>D		enable/disable intensity of background color
+#	CSI =<x>E		set/clear blink vs. bold background
+#	CSI 7     	(sc)	(sc) save cursor position
+#	CSI 8   	(rc)	(rc) restore cursor position to saved value
+#	CSI H		(hts)	(hts) set tab stop
+#	CSI Q<n><string>	define function key string
+#				(string must begin and end with delimiter char)
+#	CSI c   	(clear) clear screen
+#
+# The lack of any specification for attributes in SGR (among other things)
+# makes this a wretchedly weak standard. The table above is literally 
+# everything iBSC2 has to say about terminal escape sequences; there is
+# no further discussion of their meaning or how to set the parameters
+# in these sequences at all.
+#
+
+######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
+#
+# The historical termcap file entries were written primarily in 4.4BSD termcap.
+# The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
+# with the extension names chosen for compatibility with the termcap names
+# assigned in System V terminfo.  There are some variant extension sets out
+# there.  We try to describe them here.
+#
+# XENIX extensions:
+#
+# The XENIX extensions include a set of function-key capabilities as follows:
+#
+#       code	XENIX variable name	terminfo name	name clashes?
+#	----	-------------------	-------------	-----------------------
+#	CL	key_char_left
+#	CR	key_char_right
+#	CW	key_change_window			create_window
+#	EN	key_end          	kend
+#	HM	key_home		khome
+#	HP	??
+#	LD	key_delete_line  	kdl1
+#	LF	key_linefeed     			label_off
+#	NU	key_next_unlocked_cell
+#	PD	key_page_down   	knp
+#	PL	??
+#	PN	start_print		mc5
+#	PR	??
+#	PS	stop_print		mc4
+#	PU	key_page_up     	kpp		pulse
+#	RC	key_recalc				remove_clock
+#	RF	key_toggle_ref				req_for_input
+#	RT	key_return      	kent
+#	UP	key_up_arrow           	kcuu1   	parm_up_cursor
+#	WL	key_word_left
+#	WR	key_word_right
+#
+# The XENIX extensions also include the following character-set and highlight
+# capabilities:
+#
+#	XENIX	terminfo	function
+#	-----	--------	------------------------------
+#	GS	smacs		start alternate character set
+#	GE	rmacs		end alternate character set
+#	GG			:as:/:ae: glitch (analogous to :sg:/:ug:)
+#	bo	blink		begin blink (not used in /etc/termcap)
+#	be			end blink (not used in /etc/termcap)
+#	bb			blink glitch  (not used in /etc/termcap)
+#	it	dim		begin dim (not used in /etc/termcap)
+#	ie			end dim (not used in /etc/termcap)
+#	ig			dim glitch  (not used in /etc/termcap)
+#
+# Finally, XENIX also used the following forms-drawing capabilities:
+#
+#	single	double  type             ASCII approximation 
+#	------	------	-------------    -------------------
+#	GV	Gv	vertical line             |
+#	GH	Gv	horizontal line       -   _
+#	G1	G5	top right corner       _   |
+#	G2	G6	top left corner       | 
+#	G3	G7	bottom left corner         |_
+#	G4	G8	bottom right corner   _|
+#	GD	Gd	down-tick character        T
+#	GL	Gl	left-tick character   -|
+#	GR	Gr	right-tick character       |-
+#	GC	Gc	middle intersection   -|-
+#	GU	Gu	up-tick character          _|_
+#
+# These were invented to take advantage of the IBM PC ROM character set.  One
+# can compose an acsc string from the single-width characters as follows
+#	"j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
+# When translating a termcap file, ncurses tic will do this automatically.
+# The double forms characters don't fit the SVr4 terminfo model.
+#
+# AT&T Extensions:
+#
+# The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
+# nonstandard capabilities.  Its signature is the KM capability, used to name
+# some sort of keymap file.  EE, BO, CI, CV, XS, DS, FL and FE are in this
+# set.  Comments in the original, and a little cross-checking with other AT&T
+# documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
+# (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
+# FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
+# cursor invisible), and CV=:ve: (make cursor normal).
+#
+# HP Extensions
+#
+# The HP library (as of mid-1995, their term.h file version 70.1) appears to
+# have the System V capabilities up to SVr1 level.  After that, it supports
+# two nonstandard caps meml and memu corresponding to the old termcap :ml:,
+# :mu: capabilities.  After that, it supports caps plab_norm, label_on,
+# label_off, and key_f11..key_f63 capabilities like SVr4's.  This makes the
+# HP binary format incompatible with SVr4's.
+#
+# IBM Extensions
+#
+# There is a set of nonstandard terminfos used by IBM's AIX operating system.
+# The AIX terminfo library diverged from SVr1 terminfo, and replaces all
+# capabilities following prtr_non with the following special capabilties:
+# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
+# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
+# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
+# rvert, lvert.   Some of these are identical to XPG4/SVr4 equivalents:
+# kcmd, kend, khlp, and kf11...kf63.  Two others (kbtab and ksel) can be
+# renamed (to kcbt and kslt).  The places in the box[12] capabilities
+# correspond to acsc chars, here is the mapping:
+#
+#	box1[0]  = ACS_ULCORNER
+#	box1[1]  = ACS_HLINE	
+#	box1[2]  = ACS_URCORNER
+#	box1[3]  = ACS_VLINE
+#	box1[4]  = ACS_LRCORNER
+#	box1[5]  = ACS_LLCORNER
+#	box1[6]  = ACS_TTEE
+#	box1[7]  = ACS_RTEE
+#	box1[8]  = ACS_BTEE
+#	box1[9]  = ACS_LTEE
+#	box1[10] = ACS_PLUS
+#
+# The box2 characters are the double-line versions of these forms graphics.
+# The AIX binary terminfo format is incompatible with SVr4's.
+#
+# Iris console extensions:
+#
+# HS is half-intensity start; HE is half-intensity end
+# CT is color terminal type (for Curses & rogue)
+# CP is color change escape sequence
+# CZ are color names (for Curses & rogue)
+#
+# The ncurses tic utility recognizes HS as an alias for mh <dim>.
+#
+# TC Extensions:
+#
+# There is a set of extended termcaps associated with something
+# called the "Terminal Control" or TC package created by MainStream Systems,
+# Winfield Kansas.  This one also uses GS/GE for as/ae, and also uses
+# CF for civis and CO for cvvis.  Finally, they define a boolean :ct:
+# that flags color terminals.
+#
+######## CHANGE HISTORY
+#
+# The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
+# Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
+# project.
+#
+# This file contains all the capability information present in John Kunze's
+# last version of the termcap master file, except as noted in the change 
+# comments at end of file.  Some information about very ancient obsolete
+# capabilities has been moved to comments.  Some all-numeric names of older
+# terminals have been retired.
+#
+# I changed :MT: to :km: (the 4.4BSD name) everywhere.  I commented out some
+# capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
+# used by BSD curses.
+#
+# The 9.1.0 version of this file was translated from my lightly-edited copy of
+# 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
+# the purpose.  Unless the ncurses tic implementation and the Lisp code were
+# making perfectly synchronized mistakes which I then failed to catch by
+# eyeball, the translation was correct and perfectly information-preserving.
+#
+# Major version number bumps correspond to major version changes in ncurses.
+#
+# Here is a log of the changes since then:
+#
+# 9.1.0 (Wed Feb  1 04:50:32 EST 1995):
+#	* First terminfo master translated from 8.3.
+# 9.2.0 (Wed Feb  1 12:21:45 EST 1995):
+#	* Replaced Wyse entries with updated entries supplied by vendor.
+#
+# 9.3.0 (Mon Feb  6 19:14:40 EST 1995):
+#	* Added contact & status info from G. Clark Brown <clark@sssi.com>.
+# 9.3.1 (Tue Feb  7 12:00:24 EST 1995):
+#	* Better XENIX keycap translation.  Describe TC termcaps.
+#	* Contact and history info supplied by Qume.
+# 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
+#	* Raided the Shuford FTP site for recent termcaps/terminfos.
+#	* Added information on X3.64 and VT100 standard escape sequences.
+# 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
+#	* Added a correct X11R6 xterm entry.
+#	* Fixed terminfo translations of padding.
+# 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
+#	* Added correct acsc/smacs/rmacs strings for vt100 and xterm.
+#	* Added u6/u7/u8/u9 capabilities.
+#	* Added PCVT entry.
+# 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
+#	* Emacs uses :so:, not :mr:, for its mode line.  Fix linux entry
+#	  to use reverse-video standout so Emacs will look right.
+#	* Added el1 capability to ansi.
+#	* Added smacs/rmacs to ansi.sys.
+#
+# 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
+#	* New mt70 entry.
+#	* Added COPYRIGHTS AND OTHER DELUSIONS.
+#	* Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
+#	  smartvid & smarterm, ampex 175 & 219 & 232,
+#	  env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
+#	  ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
+#	  screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
+#	  adm36, mime314, ergo4000, ca22851.  Replaced att7300, esprit, dd5500.
+#	* Replaced the Perkin-Elmer entries with vendor's official ones.
+#	* Restored the old minimal-ansi entry, luna needs it.
+#	* Fixed some incorrect ip and proportional-padding translations.
+# 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
+#	* Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
+#	* Make the xterm entry 65 lines again; create xterm25 and xterm24
+#	  to force a particular height.
+#	* Added beehive4 and reorganized other Harris entries.
+# 9.4.2 (Thu Mar  9 01:45:44 EST 1995):
+#	* Merged in DEC's official entries for its terminals.  The only old
+#	  entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
+#	* Replaced the translated BBN Bitgraph entries with purpose-built
+#	  ones from AT&T's SVr3.
+#	* Replaced the AT&T entries with AT&T's official terminfos.
+#	* Added teleray 16, vc415, cops10. 
+#	* Merged in many individual capabilities from SCO terminfo files.
+# 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
+#	* Typo fixes.
+#	* Change linux entry so A_PROTECT enables IBM-PC ROM characters.
+# 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
+#	* Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
+#	  pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
+#	  simterm, citoh and variants.
+#	* Replaced sol entry with sol1 and sol2.
+#	* Replaced Qume QVT and Freedom-series entries with purpose-built
+#	  terminfo entries.
+#	* Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
+#	  and dg200 entries using caps from from SCO.
+#	* Added the usual set of function-key mappings to ANSI entry.
+#	* Corrected xterm's function-key capabilities.
+# 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
+#	* Fix in xterm entry, cub and cud are not reliable under X11R6.
+# 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
+#	* Fix in xterm entry, get the arrow keys right.
+#	* Change some \0 escapes to \200.
+# 9.4.7 (Tue Apr  4 11:27:11 EDT 1995)
+#	* Added apple (Videx card), adm1a, oadm31.
+#	* Fixed malformed ampex csr.
+#	* Fixed act4, cyb110; they had old-style prefix padding left in. 
+#	* Changed mandatory to advisory padding in many entries.
+#	* Replaced HP entries up to hpsub with purpose-built ones.
+#	* Blank rmir/smir/rmdc/smdc capabilities removed.
+#	* Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
+# 9.4.8 (Fri Apr  7 09:36:34 EDT 199):
+#	* Replaced the Ann Arbor entries with SCO's, the init strings are
+#	  more efficient (but the entries otherwise identical).
+#	* Added dg211 from Shuford archive.
+#	* Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
+#	  adm42-nl, pc52, gs6300, xerox820, uts30.
+#	* Pull SCO's padding into vi200 entry.
+#	* Improved capabilities for tvi4107 and other Televideo and Viewpoint
+#	  entries merged in from SCO's descriptions.
+#	* Fixed old-style prefix padding on zen50, h1500.
+#	* Moved old superbee entry to superbee-xsb, pulled in new superbee
+#	  entry from SCO's description.
+#	* Reorganized the special entries.
+#	* Added lm#0 to cbunix and virtual entries.
+#
+# 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
+#	* Restored cdc456tst.
+#	* Fixed sb1 entry, SCO erroneously left out the xsb glitch.
+#	* Added megatek, beacon, microkit.
+#	* Freeze for ncurses-1.9 release.
+# 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
+#	* Added historical data for TAB.
+#	* Comment fixes from David MacKenzie.
+#	* Added the new BSDI pc3 entry.
+# 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
+#	* A change in the tic -C logic now ensures that all entries in 
+#	  the termcap translation will fit in < 1024 bytes.
+#	* Added `bobcat' and `gator' HP consoles and the Nu machine entries
+#	  from GNU termcap file.  This merges in all their local information.
+# 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
+#	* Changed tic -C logic to dump all capabilities used by GNU termcap.
+#	* Added warnings about entries with long translations (restoring
+#	  all the GNU termcaps pushes a few over the edge).
+# 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
+#	* Yet another tic change, and a couple of entry tweaks, to reduce the
+#	  number of long (> 1024) termcap translations back to 0.
+#
+# 9.6.0 (Mon May  1 10:35:54 EDT 1995)
+#	* Added kf13-kf20 to Linux entry.
+#	* Regularize Prime terminal names.
+#	* Historical data on Synertek.
+#	* Freeze for ncurses-1.9.1.
+# 9.6.1 (Sat May  6 02:00:52 EDT 1995):
+#	* Added true xterm-color entry, renamed djm's pseudo-color entry.
+#	* Eliminate whitespace in short name fields, this tanks some scripts.
+#	* Name field changes to shorten some long entries.
+#	* Termcap translation now automatically generates empty rmir/smir
+#	  when ich1/ich is present (copes with an ancient vi bug).
+#	* Added `screen' entries from FSF's screen-3.6.2.
+#	* Added linux-nic and xterm-nic entries.
+# 9.6.2 (Sat May  6 17:00:55 EDT 1995):
+#	* Change linux entry to use smacs=\E[11m and have an explicit acsc,
+#	  eliminating some special-case code in ncurses.
+#
+# 9.7.0 (Tue May  9 18:03:12 EDT 1995):
+#	* Added vt320-k3, rsvidtx from the Emacs termcap.dat file.  I think
+#	  that captures everything unique from it.
+#	* Added reorder script generator.
+#	* Freeze for ncurses 1.9.2 release.
+# 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
+#	* Added Sean Farley's kspd, flash, rs1 capabilities for linux.
+#	* Added Olaf Siebert's corrections for adm12.
+#	* ansi-pc-color now includes the colors and pairs caps, so that
+#	  entries which use it will inherit them automatically.
+#	* The linux entry can now recognize the center (keypad 5) key.
+#	* Removed some junk that found its way into Linux acsc.
+#
+# 9.8.0 (Fri Jul  7 04:46:57 EDT 1995):
+#	* Add 50% cut mark as a desperate hack to reduce tic's core usage.
+#	* xterm doesn't try to use application keypad mode any more.
+#	* Freeze for ncurses-1.9.3 release.
+# 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
+#	* Added corrected sun entry from vendor.
+#	* Added csr capability to linux entry.
+#	* Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
+#	* Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
+#	* Some commented-out caps in long entries come back in, my code 
+#	  for computing string-table lengths had a bug in it.
+#	* pcansi series modified to fit comm-program reality better.
+# 9.8.2 (Sat Sep  9 23:35:00 EDT 1995):
+#	* BSD/OS actually ships the ibmpc3 bold entry as its console.
+#	* Correct some bad aliases in the pcansi series
+#	* Added entry for QNX console.
+#	* Clean up duplicate long names for use with 4.4 library.
+#	* Change vt100 standout to be normal reverse vide, not bright reverse;
+#	  this makes the Emacs status line look better.
+# 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
+#	* Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
+#	* Minor surgery, mostly on name strings, to shorten termcap version.
+#
+# 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
+#	* Added dec-vt100 for use with the EWAN emulator.
+#	* Added kmous to xterm for use with xterm's mouse-tracking facility.
+#	* Freeze for 1.9.5 alpha release.
+# 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
+#	* Changed xterm lines to 24, the X11R6 default.
+# 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
+#	* Added 7 newly discovered, undocumented acsc characters to linux
+#	  entry (the pryz{|} characters).
+#	* ncurses no longer steals A_PROTECT.  Simplify linux sgr accordingly.
+#	* Correct two typos in the xterm entries introduced in 9.9.1.
+#	* I finally figured out how to translate ko capabilities.  Done.
+#	* Added tvi921 entries from Tim Theisen.
+#	* Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
+#	* Removed mystery tec entry, it was neither interesting nor useful.
+#	* shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
+#	  vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
+#	  trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
+#	  by making them relative to use capabilities
+#	* Added cuf1=^L to tvi925 from deleted variant tvi925a.
+#	* fixed cup in adm22 entry and parametrized strings in vt320-k3.
+#	* added it#8 to entries that used to have :pt: -- tvi912, vi200,
+#	  ampex80,
+#	* Translate all home=\E[;H capabilities to home=\E[H, they're 
+#	  equivalent.
+#	* Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
+#	  vt100 and ANSI-like terminals.
+# 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
+#	* Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
+#	  does this now, too.
+#	* fviewpoint is gone, it duplicated screwpoint.
+#	* Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
+#	  ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3, 
+#	  versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
+#	  The UW vi50 replaces the old one, which becomes vi50adm,
+#	* No more embedded commas in name fields.
+#
+# 9.10.0 (Wed Oct  4 15:39:37 EDT 1995):
+#	* XENIX forms characters in fos, trs16, scoansi become acsc strings,
+#	* Introduced klone+* entries for describing Intel-console behavior.
+#	* Linux kbs is default-mapped to delete for some brain-dead reason.
+#	* -nsl -> -ns.  The -pp syntax is obsolete.
+#	* Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
+#	* Make xterm entry do application-keypad mode again.  I got complaints
+#	  that it was messing up someone's 3270 emulator.
+#	* Added some longname fields in order to avoid warning messages from
+#	  older tic implementations.
+#	* According to ctrlseqs.ms, xterm has a full vt100 graphics set.  Use
+#	  it! (This gives us pi, greater than, less than, and a few more.)
+#	* Freeze for ncurses-1.9.6 release.
+# 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
+#	* Add xon to a number of console entries, they're memory-mapped and
+#	  don't need padding.
+#	* Correct the use dependencies in the ansi series.
+#	* Hand-translate more XENIX capabilities.
+#	* Added hpterm entry for HP's X terminal emulator.
+#	* Added aixterm entries.
+#	* Shortened four names so everything fits in 14 chars.  
+#
+# 9.11.0 (Thu Nov  2 17:29:35 EST 1995):
+#	* Added ibcs2 entry and info on iBCS2 standard.
+#	* Corrected hpa/vpa in linux entry.  They still fail the worm test.
+#	* We can handle the HP meml/memu capability now.
+#	* Added smacs to klone entries, just as documentation.
+#	* Carrected ansi.sys and cit-500 entries.
+#	* Added z39, vt320-k311, v220c, and avatar entries.
+#	* Make pcansi use the ansi.sys invis capability.
+#	* Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
+#	  tvi925, tvi950, dt80, ncr7900i, h19.
+#	* X3.64 has been withdrawn, change some references.
+#	* Removed function keys from ansi-m entry.
+#	* Corrected ansi.sys entry.
+#	* Freeze for ncurses-1.9.7 release.
+# 9.11.1 (Tue Nov  6 18:18:38 EST 1995):
+#	* Added rmam/smam capabilities to many entries based on init strings.
+#	* Added correct hpa/vpa to linux.
+#	* Reduced several entries relative to vt52.
+# 9.11.2 (Tue Nov  7 00:21:06 EST 1995):
+#	* Exiled some utterly unidentifiable custom and homebrew types to the
+#	  UFO file; also, obsolete small-screen hardware; also, entries which
+#	  look flat-out incorrect, garbled, or redundant.  These include the
+#	  following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec, 
+#	  tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
+#	  apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
+#	  fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55, 
+#	  yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2, 
+#	  vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200, 
+#	  trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40, 
+#	  att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w, 
+#	  tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na, 
+#	  c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na, 
+#	  regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb, 
+#	  vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam, 
+#	  vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
+#	* Corrected pcvt25h as suggested by Brian C. Grayson
+#	  <bgrayson@pine.ece.utexas.edu>.
+# 9.11.3 (Thu Nov  9 12:14:40 EST 1995):
+#	* Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H. 
+#	* Added kent=\EOM to xterm entry.
+#
+# 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
+#	* Corrected gigi entry.
+#	* Restored cuf/cud1 to xterm, their apparent bugginess was due to
+#	  bad hpa/vpa capabilities.
+#	* Corrected flash strings to have a uniform delay of .2 sec.  No
+#	  more speed-dependent NUL-padding!
+#	* terminfo capabilities in comments bracketed with <>.
+# 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
+#	* Replaced pcvt with the 3.31 pcvt entries.
+#	* Freeze for 1.9.7a.
+# 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
+#	* Added emu entry from the X11R6 contrib tape sources.
+#
+# 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
+#	* Improved iris-ansi and sun entries.
+#	* More flash string improvements.
+#	* Corrected wy160 & wy160 as suggested by Robert Dunn
+#	* Added dim to at386.  
+#	* Reconciled pc3 and ibmpc3 with the BSDI termcap file.  Keith says
+#	  he's ready to start using the termcap generated from this one.
+#	* Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
+#	  ln03, lno3-w, h19-g, z29a*, qdss.  Made vt200 an alias of vt220.
+#	* Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
+#	  att610, att620, att630, 
+#	* Changed hazeltine name prefix from h to hz.
+#	* Sent t500 to the UFI file.
+#	* I think we've sucked all the juice out of BSDI's termcap file now.
+#	* Freeze for ncurses 1.9.8 release
+# 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
+#	* Unfreeze, linux kbs needed to be fixed.
+#	* Tim Theisen pinned down a bug in the DMD firmware.
+# 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
+#	* Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
+#	  (The broken ones had been shadowed by sgr.)
+# 9.12.3 (Thu Dec  7 17:47:22 EST 1995):
+#	* Added documentation on ECMA-48 standard.
+#	* New Amiga entry.
+# 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
+#	* More ECMA-48 stuff
+#	* Corrected typo in minix entry, added pc-minix.
+#	* Corrected khome/kend in xterm (thank you again, Aaron Ucko).
+#	* Added rxvt entry.
+#	* Added 1.3.x color-change capabilities to linux entry.
+# 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
+#	* Corrected rxvt entry khome/kend.
+#	* Corrected linux color change capabilities.
+#	* NeXT entries from Dave Wetzel.
+#	* Cleaned up if and rf file names (all in /usr/share now).
+#	* Changed linux op capability to avoid screwing up a background color
+#	  pair set by setterm.
+# 9.12.6 (Wed Feb  7 16:14:35 EST 1996):
+#	* Added xterm-sun.
+# 9.12.7 (Fri Feb  9 13:27:35 EST 1996):
+#	* Added visa50.
+#
+# 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
+#	* Another sweep through the Shuford archive looking for new info.
+#	* Added dg100 alias to dg6053 based on a comp.terminals posting.
+# 	* Added st52 from Per Persson.
+#	* Added eterm from the GNU Emacs 19.30 distribution.
+#	* Freeze for 1.9.9.
+# 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
+#	* FreeBSD console entries from Andrew Chernov.
+#	* Removed duplicate Atari st52 name.
+# 9.13.2 (Tue May  7 16:10:06 EDT 1996)
+#	* xterm doesn't actually have ACS_BLOCK.
+#	* Change klone+color setf/setb to simpler forms that can be
+#	  translated into termcap.
+#	* Added xterm1.
+#	* Removed mechanically-generated junk capabilities from cons* entries.
+#	* Added color support to bsdos.
+# 9.13.3 (Thu May  9 10:35:51 EDT 1996):
+#	* Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
+#	* Created ecma+color, linux can use it.  Also added ech to linux.
+#	* Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
+#	* Add descriptions to FreeBSD console entries.  Also shorten
+#	  some aliases to <= 14 chars for portability.
+#	* Added x68k console
+#	* Added OTbs to several VT-series entries.
+# 9.13.4 (Wed May 22 10:54:09 EDT 1996):
+#	* screen entry update for 3.7.1 from Michael Alan Dorfman.
+# 9.13.5 (Wed Jun  5 11:22:41 EDT 1996):
+#	* kterm correction due to Kenji Rikitake.
+#	* ACS correction in vt320-kll due to Phillippe De Muyter.
+# 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
+#	* Sun console entry correction from J.T. Conklin.
+#	* Changed all DEC VT300 and up terminals to use VT300 tab set
+# 9.13.7 (Mon Jul  8 20:14:32 EDT 1996):
+#	* Added smul to linux entry (we never noticed it was missing 
+#	  because of sgr!).
+#	* Added rmln to hp+labels (deduced from other HP entries).
+#	* Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
+#	  pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
+#	* Corrected vt220 acsc.
+#	* The klone+sgr and klone+sgr-dumb entries now use klone+acs;
+#	  this corresponds to reality and helps prevent some tic warnings.
+#	* Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
+#	  hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
+#	  adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
+#	  qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
+#	  wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
+#	  adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p, 
+#	  f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
+#	  owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
+#	  lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
+#	  dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
+#	  ifmr, v3220, wy100q, tandem653, ibmaed.
+#	* Added DWK terminal description.
+# 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
+#	* Many entries now have highlights inherited from adm+sgr.
+#	* xterm entry now corresponds to XFree86 3.1.2E, with color.
+#	* xtitle and xtitle-twm enable access to the X status line.
+#	* Added linux-1.3.6 color palette caps in conventional format.
+#	* Added adm1178 terminal.
+#	* Move fos and apollo terminals to obsolete category.
+#	* Aha! The BRL terminals file told us what the Iris extensions mean.
+#	* Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
+#	  commodore, cdc721-esc, excel62, osexec.  Replaced from the BRL file:
+#	  cit500, adm11. 
+# 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
+#	* Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
+#	  aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
+#	* Corrected, from BRL termcap file: vi50.
+#	* Better rxvt entry & corrected xterm entries from Thomas Dickey.
+# 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
+#	* Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
+#	  att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
+#	  (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
+#	  tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
+#	  apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
+#	* Paired-attribute fixes to various terminals.
+#	* Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
+#	* xterm entry corrections from Thomas Dickey.
+# 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
+#	* Added t916 entry, translated from a termcap in SCO's support area.
+#	* New qnx entry from Michael Hunter.
+# 9.13.12 (Mon Aug  5 14:31:11 EDT 1996):
+#	* Added hpex2 from Ville Sulko.
+#	* Fixed a bug that ran the qnx and pcvtXX together.
+# 9.13.13 (Fri Aug  9 01:16:17 EDT 1996):
+#	* Added dtterm entry from Solaris CDE.
+# 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
+#	* corrected pairs#8 typo in dtterm entry.
+#	* added tvi9065.
+# 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
+#	* updated xterm entry to cover 3.1.2E's new features.  
+# 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
+#	* Added new minix entry
+#	* Removed aliases of the form ^[0-9]* for obsolete terminals.
+#	* Commented out linux-old, nobody's using pre-1.2 kernels now.
+# 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
+#	* Added Prism entries and kt7ix.
+#	* Caution notes about EWAN and tabset files.
+#	* Changed /usr/lib/tabset -> /usr/share/tabset.
+#	* Added acsc/rmacs/smacs to vt52.
+# 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
+#	* Merged in Thomas Dickey's reorganization of the xterm entries;
+#	  added technical corrections to avoid warning messages.
+# 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
+#	* Added rmso=\E[27m in Linux entry.
+#	* Added koi8-r support for Linux console.
+#	* Replace xterm entries with canonical ones from XFree86 3.2.
+# 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
+#	* Added color_xterm from Jacob Mandelson
+# 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
+#	* Back off the xterm entry to use r6 as a base.
+# 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
+#	* Added dec-vt220 at Adrian Garside's request.
+# 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
+#	* Replaced minitel-2 entry.
+#	* Added MGR, ansi-nt.
+#	* Minor corrections to xterm entries.
+#	* Replaced EWAN telnet entry.
+#	* Dropped the reorder script generator.  It was a fossil.
+# 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
+#	* Thorsten Lockert added termcap `bs' to a lot of types, working from
+#	  the 4.4BSD Lite2 file.
+# 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
+#	* Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
+#	* Updated iris-ansi; corrected vt102-w.
+#	* Switch base xterm entry to 3.3 level.
+# 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
+#	* Added basic4.
+#	* Removed rmir/smir from tv92B.
+#
+# 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
+#	* add hds200 description (Walter Skorski)
+#	* add beterm entry (Fred Fish)
+#	* add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
+#	  iris-color entries.
+#	* add emx entries.
+#	* Replaced unixpc entry with Benjamin Sittler's corrected version.
+#	* Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
+#	  versions.
+#	* remove sgr string from qnx based on report by Xiaodan Tang
+#	* Added u8/u9, removed rmul/smul from sun-il.
+#	* 4.2 tic displays \0 rather than \200.
+#	* add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
+#	  apparently based on cp-866).
+#	* Merged in Pavel Roskin's acsc for linux-koi8
+#	* Corrected some erroneous \\\s to \.
+#	* 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
+#	* II -> ii in pcvtXX, screen, xterm.
+#	* Removed \n chars following ANSI escapes in sgr & friends.
+#	* Updated Wyse entries.
+#	* h19 corrections from Tim Pierce.
+#	* Noted that the dm2500 has both ich and smir.
+#	* added pccons for the Alpha under OSF/1.
+#	* Added Sony NEWS workstation entries and cit101e-rv.
+#	* Reverted `amiga'; to Kent Polk's version, as I'm told
+#	  the Verkuil entry messes up with Amiga Telnet.
+# 10.2.1 (Sun Mar  8 18:32:04 EST 1998):
+#	* Corrected attributions in 10.2.0 release notes.
+#	* Scanned the Shuford archive for new terminfos and information.
+#	* Removed sgr from qnx entry (Thomas Dickey).
+#	* Added entries for ICL and Kokusai Data Systems terminals.
+#	* Incorporated NCR terminfos from the Boundless Technology FTP site.
+#	* Incorporated att700 from the Boundless Technology FTP site.
+#	* Miscellaneous contact-address and Web-page updates.
+# 10.2.2 (Thu May  7 12:18:04 EDT 1998):
+#	* Moved Altos to OBSOLETE UNIX CONSOLES
+#	* Moved Hewlett-Packard terminals to OLDER TERMINAL TYPES, except for
+#	  the 700s which go to WORKSTATION CONSOLES.
+#	* Major reorganization of ANSI/console/VT types.  Moved vt52 to the
+#	  obsolete section.
+#	* Daisy-wheel printers moved to UFO file.
+# 10.2.3 (Tue May 12 22:59:11 EDT 1998):
+#	* Commented out hds200 is2 to avoid overflowing terminfo length limit.
+#	* Restored OT capabilities to UFO file.
+#	* add nxterm and xterm-color terminfo description (request by Cristian
+#	  Gafton <gafton@redhat.com>).
+#	* Modify rxvt terminfo description to clear alternate screen before
+#	  switching back to normal screen, for compatibility with applications
+#	  which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
+#	* Modify linux terminfo description to reset color palette (reported
+#	  by Telford Tendys <telford@eng.uts.edu.au>).
+# 10.2.4 (Thu Jul  2 18:13:26 EDT 1998):
+#	* Added minitel1 entries from Alexander Montaron.
+#	* Added qnxt2 from Federico Bianchi.
+# 10.2.5: (Mon Aug 24 07:32:34 EDT 1998):
+#	* Resolve NetBSD Problem Report #4583 by adding civis/cnorm to pcvtXX.
+#	* dtterm enacs correction from Alexander V. Lukyanov.
+#	* Added ncsa-telnet, resolving Debian bug report 25341.
+#	* Added Francesco Potorti's tuned Wyse 99 entries.
+#
+# The following sets edit modes for GNU EMACS.
+# Local Variables:
+# fill-prefix:"\t"
+# fill-column:75
+# comment-column:0
+# comment-start-skip:"^#+"
+# comment-start:"# "
+# compile-command:"tic -c termtypes.master"
+# End:
+######## SHANTIH!  SHANTIH!  SHANTIH!