we don't like .Pp and blank lines before/after .Ss;

millert@ ok

27 files changed, 28 insertions, 86 deletions

diff --git a/share/man/man4/cardbus.4 b/share/man/man4/cardbus.4
index 465116d93ae..6f6c4b1ceeb 100644
--- a/share/man/man4/cardbus.4
+++ b/share/man/man4/cardbus.4
@@ -1,4 +1,4 @@
-.\" $OpenBSD: cardbus.4,v 1.12 2001/08/03 15:21:16 mpech Exp $
+.\" $OpenBSD: cardbus.4,v 1.13 2001/10/04 16:56:51 mpech Exp $
 .\" $NetBSD: cardbus.4,v 1.4 2000/02/02 19:57:17 augustss Exp $
 .\"
 .\" Copyright (c) 1999 The NetBSD Foundation, Inc.
@@ -64,7 +64,6 @@ card or network card), you should set this bit to 1.
 .Ox
 includes the following machine-independent CardBus
 drivers, sorted by function and driver name:
-.Pp
 .Ss Network interfaces
 .Bl -tag -width speaker -offset ind -compact
 .It Xr dc 4
diff --git a/share/man/man4/icmp6.4 b/share/man/man4/icmp6.4
index 6d1f18ee540..18aaeeafbc8 100644
--- a/share/man/man4/icmp6.4
+++ b/share/man/man4/icmp6.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: icmp6.4,v 1.7 2001/06/23 05:57:04 deraadt Exp $
+.\"	$OpenBSD: icmp6.4,v 1.8 2001/10/04 16:56:51 mpech Exp $
 .\"	$KAME: icmp6.4,v 1.3 2000/11/24 08:44:40 itojun Exp $
 .\"
 .\" Copyright (C) 1999 WIDE Project.
@@ -122,7 +122,6 @@ Notice that this behavior is opposite from
 raw sockets and.
 .Tn ICMPv4
 sockets.
-.Pp
 .Ss ICMPv6 type/code filter
 Each
 .Tn ICMPv6
diff --git a/share/man/man4/ip.4 b/share/man/man4/ip.4
index a67d4dd35a4..7a112276fed 100644
--- a/share/man/man4/ip.4
+++ b/share/man/man4/ip.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: ip.4,v 1.15 2001/05/14 09:12:06 markus Exp $
+.\"	$OpenBSD: ip.4,v 1.16 2001/10/04 16:56:51 mpech Exp $
 .\"	$NetBSD: ip.4,v 1.3 1994/11/30 16:22:19 jtc Exp $
 .\"
 .\" Copyright (c) 1983, 1991, 1993
@@ -146,7 +146,6 @@ A high range, for fun.
 Reserved ports; between 600 and 1023.
 .El
 .Ss "Multicast Options"
-.Pp
 .Tn IP
 multicasting is supported only on
 .Dv AF_INET
@@ -271,7 +270,6 @@ contains the same values as used to add the membership.
 Memberships are dropped when the socket is closed or the process exits.
 .\"-----------------------
 .Ss "Raw IP Sockets"
-.Pp
 Raw
 .Tn IP
 sockets are connectionless,
diff --git a/share/man/man4/isa.4 b/share/man/man4/isa.4
index 7acd9439136..e6da7041232 100644
--- a/share/man/man4/isa.4
+++ b/share/man/man4/isa.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: isa.4,v 1.10 2001/08/03 15:21:16 mpech Exp $
+.\"	$OpenBSD: isa.4,v 1.11 2001/10/04 16:56:51 mpech Exp $
 .\"	$NetBSD: isa.4,v 1.19 2000/03/18 16:54:37 augustss Exp $
 .\"
 .\" Copyright (c) 2000 Theo de Raadt.  All rights reserved.
@@ -74,7 +74,6 @@ or
 devices instead.
 .Sh SUPPORTED DEVICES
 At least the following devices are supported:
-.Pp
 .Ss SCSI controllers
 .Bl -tag -width speaker -offset ind
 .It Xr aha 4
@@ -121,7 +120,6 @@ device driver which is used instead on machines with PCI IDE controllers.
 .It Xr wt 4
 Wangtek and compatible QIC-02 and QIC-36 tape drives.
 .El
-.Pp
 .Ss Serial and parallel interfaces
 .Bl -tag -width speaker -offset ind
 .It Xr com 4 , Xr pccom 4
@@ -145,7 +143,6 @@ parallel port interface.
 .It Xr rtfps 4
 IBM RT four-port serial cards.
 .El
-.Pp
 .Ss Network interfaces
 .Bl -tag -width speaker -offset ind
 .It Xr ec 4
diff --git a/share/man/man4/isapnp.4 b/share/man/man4/isapnp.4
index 6541f9a519a..af147d98399 100644
--- a/share/man/man4/isapnp.4
+++ b/share/man/man4/isapnp.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: isapnp.4,v 1.21 2001/08/03 15:21:16 mpech Exp $
+.\"	$OpenBSD: isapnp.4,v 1.22 2001/10/04 16:56:51 mpech Exp $
 .\"	$NetBSD: isapnp.4,v 1.8 1998/06/07 09:08:46 enami Exp $
 .\"
 .\" Copyright (c) 1997 Jonathan Stone
@@ -50,7 +50,6 @@ devices on an ISA bus.
 .Ox
 includes machine-independent ISAPNP drivers, sorted by function
 and driver name:
-.Pp
 .Ss Disk controllers
 .Bl -tag -width speakerxx -offset ind -compact
 .It Xr aic 4
@@ -60,7 +59,6 @@ Adaptec AHA-154x SCSI controller card.
 .It Xr wdc 4
 IDE controllers (typically found on sound cards).
 .El
-.Pp
 .Ss Serial and parallel interfaces
 .Bl -tag -width speaker -offset ind -compact
 .It Xr com 4 , Xr pccom 4
@@ -68,7 +66,6 @@ IDE controllers (typically found on sound cards).
 modems.
 Winmodems are not supported.
 .El
-.Pp
 .Ss Network interfaces
 .Bl -tag -width speaker -offset ind -compact
 .It Xr ep 4
diff --git a/share/man/man4/man4.i386/mtrr.4 b/share/man/man4/man4.i386/mtrr.4
index ac258ea581e..a347ff0b6c9 100644
--- a/share/man/man4/man4.i386/mtrr.4
+++ b/share/man/man4/man4.i386/mtrr.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: mtrr.4,v 1.9 2001/08/03 15:21:16 mpech Exp $
+.\"	$OpenBSD: mtrr.4,v 1.10 2001/10/04 16:56:51 mpech Exp $
 .\"
 .\" Pentium MTRR  driver for OpenBSD.
 .\" Copyright 1999 Matthieu Herrb <matthieu@openbsd.org>
@@ -21,7 +21,6 @@ The
 .Nm
 device provides access to the memory range attributes supported by the
 MTRRs on Pentiums.
-.Pp
 .Ss IOCTL INTERFACE
 Several architectures allow attributes to be associated with ranges of physical
 memory.
diff --git a/share/man/man4/man4.vax/cons.4 b/share/man/man4/man4.vax/cons.4
index e456dd919bd..b632b4100ec 100644
--- a/share/man/man4/man4.vax/cons.4
+++ b/share/man/man4/man4.vax/cons.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: cons.4,v 1.5 2000/10/13 04:09:20 aaron Exp $
+.\"	$OpenBSD: cons.4,v 1.6 2001/10/04 16:56:51 mpech Exp $
 .\"
 .\" Copyright (c) 1980, 1991 Regents of the University of California.
 .\" All rights reserved.
@@ -90,7 +90,6 @@ will go into
 .Tn ODT
 (console debugger mode).
 .El
-.Pp
 .Ss VAX-11/750 or 11/730
 On an 11/750
 or an 11/730
@@ -112,7 +111,6 @@ a
 will put you in remote diagnosis mode, where the prompt will be
 .Ql RDM> .
 .El
-.Pp
 .Ss VAX 8600 or 8650
 The
 .Tn VAX
diff --git a/share/man/man4/pci.4 b/share/man/man4/pci.4
index 383f292a726..c6695258807 100644
--- a/share/man/man4/pci.4
+++ b/share/man/man4/pci.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: pci.4,v 1.45 2001/10/01 22:07:44 marc Exp $
+.\"	$OpenBSD: pci.4,v 1.46 2001/10/04 16:56:51 mpech Exp $
 .\"	$NetBSD: pci.4,v 1.29 2000/04/01 00:32:23 tsarna Exp $
 .\"
 .\" Copyright (c) 2000 Theo de Raadt.  All rights reserved.
@@ -67,7 +67,6 @@ devices not listed here are machine-dependent.
 Consult your system's
 .Xr intro 4
 for additional information.
-.Pp
 .Ss Details specific to the i386
 Note that interrupt mappings on the i386 may require that you configure
 your BIOS to reserve sufficient interrupts as "PCI/ISAPnP" so that there
diff --git a/share/man/man4/pcmcia.4 b/share/man/man4/pcmcia.4
index e18b20200e3..09167d8df98 100644
--- a/share/man/man4/pcmcia.4
+++ b/share/man/man4/pcmcia.4
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: pcmcia.4,v 1.18 2001/08/03 15:21:16 mpech Exp $
+.\"	$OpenBSD: pcmcia.4,v 1.19 2001/10/04 16:56:51 mpech Exp $
 .\"	$NetBSD: pcmcia.4,v 1.4 1998/06/07 09:10:30 enami Exp $
 .\"
 .\" Copyright (c) 1997 The NetBSD Foundation, Inc.
@@ -55,13 +55,11 @@ devices.
 .Sh SUPPORTED DEVICES
 The following devices are supported, sorted by function
 and driver name:
-.Pp
 .Ss Serial interfaces and modems
 .Bl -tag -width speaker -offset ind -compact
 .It Xr com 4 , Xr pccom 4
 8250/16450/16550-compatible PCMCIA serial cards and modems.
 .El
-.Pp
 .Ss Network interfaces
 .Bl -tag -width speaker -offset ind -compact
 .It Xr an 4
@@ -85,7 +83,6 @@ Lucent WaveLAN IEEE 802.11DS and compatible cards.
 .It Xr xe 4
 Xircom 16bit Ethernet cards.
 .El
-.Pp
 .Ss SCSI controllers
 .Bl -tag -width speaker -offset ind -compact
 .It Xr aic 4
diff --git a/share/man/man5/fs.5 b/share/man/man5/fs.5
index a60de210abe..1537d4f5960 100644
--- a/share/man/man5/fs.5
+++ b/share/man/man5/fs.5
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: fs.5,v 1.8 2000/03/19 19:25:28 aaron Exp $
+.\"	$OpenBSD: fs.5,v 1.9 2001/10/04 16:56:51 mpech Exp $
 .\"	$NetBSD: fs.5,v 1.3 1994/11/30 19:31:17 jtc Exp $
 .\"
 .\" Copyright (c) 1983, 1991, 1993
@@ -245,7 +245,6 @@ If the value of
 is greater than or equal to 5%,
 fragmentation is unlikely to be problematical, and
 the file system defaults to optimizing for time.
-.Pp
 .Ss Cylinder group related limits
 Each cylinder keeps track of the availability of blocks at different
 rotational positions, so that sequential blocks can be laid out
@@ -311,7 +310,6 @@ must be a power of two in order for
 the
 .Fn fs_cs
 macro to work.
-.Pp
 .Ss Super-block for a file system
 The size of the rotational layout tables
 is limited by the fact that the super-block is of size
@@ -334,7 +332,6 @@ The inode and free block tables
 must fit into a single block after deducting space for
 the cylinder group structure
 .Fa struct cg .
-.Pp
 .Ss Inodes
 The inode is the focus of all file activity in the
 .Tn UNIX
diff --git a/share/man/man7/mailaddr.7 b/share/man/man7/mailaddr.7
index 31122b2de70..1bbd4ad8879 100644
--- a/share/man/man7/mailaddr.7
+++ b/share/man/man7/mailaddr.7
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: mailaddr.7,v 1.5 2000/03/19 19:25:34 aaron Exp $
+.\"	$OpenBSD: mailaddr.7,v 1.6 2001/10/04 16:56:52 mpech Exp $
 .\"	$NetBSD: mailaddr.7,v 1.3 1994/11/30 19:07:17 jtc Exp $
 .\"
 .\" Copyright (c) 1983, 1987, 1990, 1993
@@ -101,7 +101,6 @@ This is normally converted back to the
 .Dq host!user
 form before being sent
 on for compatibility with older UUCP hosts.
-.Pp
 .Ss Case distinctions
 Domain names (i.e., anything after the
 .Dq @
diff --git a/share/man/man7/packages.7 b/share/man/man7/packages.7
index 6ca00e657a4..c8400e23843 100644
--- a/share/man/man7/packages.7
+++ b/share/man/man7/packages.7
@@ -1,4 +1,4 @@
-.\" $OpenBSD: packages.7,v 1.11 2001/10/04 10:28:20 wilfried Exp $
+.\" $OpenBSD: packages.7,v 1.12 2001/10/04 16:56:52 mpech Exp $
 .\"
 .\" Copyright (c) 2000 Marc Espie
 .\"
@@ -60,7 +60,6 @@ correspondingly, human resources for the ports tree are somewhat lacking.
 As of
 .Ox 2.7 ,
 the package systems should offer a few basic warranties.
-.Pp
 .Ss "Installing a package won't erase existing files"
 .Xr pkg_add 1
 will instead identify conflicts, back the existing files up, display a
@@ -119,7 +118,6 @@ in
 .Qq "verbose, don't actually install the package"
 mode first, so that
 additional steps may be figured out.
-.Pp
 .Ss "The package system does not handle shared files across packages"
 If two packages install a file with the same name, there is a conflict.
 There is currently no mechanism in the package system beyond a basic
diff --git a/share/man/man8/afterboot.8 b/share/man/man8/afterboot.8
index ed52fb698bd..de85cbf825d 100644
--- a/share/man/man8/afterboot.8
+++ b/share/man/man8/afterboot.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: afterboot.8,v 1.62 2001/08/25 14:57:44 aaron Exp $
+.\"	$OpenBSD: afterboot.8,v 1.63 2001/10/04 16:56:52 mpech Exp $
 .Dd October 20, 1997
 .Dt AFTERBOOT 8
 \!\" Originally created by Marshall M. Midden -- 1997-10-20, m4@umn.edu
@@ -30,7 +30,6 @@ command, type:
 Administrators will rapidly become more familiar with
 .Ox
 if they get used to using the high quality manual pages.
-.Pp
 .Ss Errata
 By the time that you have installed your system, it is quite likely that
 bugs in the release have been found.
diff --git a/share/man/man8/compat_linux.8 b/share/man/man8/compat_linux.8
index bbf0bf3bbf6..a68d1e9cef6 100644
--- a/share/man/man8/compat_linux.8
+++ b/share/man/man8/compat_linux.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: compat_linux.8,v 1.18 2001/08/17 11:13:58 mpech Exp $
+.\"	$OpenBSD: compat_linux.8,v 1.19 2001/10/04 16:56:52 mpech Exp $
 .\"	$NetBSD: compat_linux.8,v 1.2 1995/10/16 20:17:59 fvdl Exp $
 .\"
 .\" Copyright (c) 1995 Frank van der Linden
@@ -81,7 +81,6 @@ system.
 After a while, you will have a sufficient set of Linux shared libraries
 on your system to be able to run newly imported Linux binaries without
 any extra work.
-
 .Ss Setting up shared libraries
 How to get to know which shared libraries Linux binaries need, and where
 to get them? Basically, there are 3 possibilities (when following
@@ -259,7 +258,6 @@ revision number) should match; the minor number(s) <mm> are
 less important, though it is advised to take the most
 recent version.
 .El
-
 .Ss Finding the necessary files.
 .Nm Note:
 the information below is valid as of the time this
@@ -348,7 +346,6 @@ slakware/x9/xf_lib.tgz
 Extract the files from these gzipped tarfiles in your /emul/linux directory
 (possibly omitting or afterwards removing files you don't need), and you
 are done.
-
 .Ss Programs using SVGAlib
 SVGAlib binaries require some extra care. The pcvt virtual console driver
 has to be in the kernel for them to work, and you will also have to create
@@ -370,17 +367,13 @@ Only the DSP device is emulated, the following link should be created:
 .nf
 /emul/linux/dev/dsp -> /dev/audio
 .fi
-.Pp
 .Ss Other links Linux bins may require
-.Pp
 CD-ROM support requires a link to your cdrom device, similar to:
 .Pp
 .nf
 /emul/linux/dev/cdrom -> /dev/cd0a   (first scsi cdrom)
 .fi
-.Pp
 .Ss File systems
-.Pp
 Many Linux binaries expect /proc to have procfs mounted on it.
 Some binaries will require it to be mounted using the
 .Fl o Ar linux
diff --git a/share/man/man8/compat_ultrix.8 b/share/man/man8/compat_ultrix.8
index 452fb1f5fbc..7df6a0e0231 100644
--- a/share/man/man8/compat_ultrix.8
+++ b/share/man/man8/compat_ultrix.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: compat_ultrix.8,v 1.8 2001/08/17 11:13:58 mpech Exp $
+.\"	$OpenBSD: compat_ultrix.8,v 1.9 2001/10/04 16:56:52 mpech Exp $
 .\"
 .\" Copyright (c) 1997 Jonathan Stone
 .\" All rights reserved.
@@ -69,7 +69,6 @@ Set up resolv.conf and svc.conf as below:
 .br
 .It # cp -p /usr/share/samples/emul/ultrix/etc/*	./
 .El
-.Pp
 .Ss /etc/resolv.conf
 The Ultrix resolver library only understands
 .Sy domain
@@ -81,7 +80,6 @@ You should create a copy of /etc/resolv.conf containing only those
 commands and put it in /emul/ultrix/etc/resolv.conf.  Note that the
 domain search order used by Ultrix executables may not be the same as
 native binaries; there is no good way around this.
-.Pp
 .Ss /etc/svc.conf
 Ultrix uses /etc/svc.conf to select an ordered search of YP, Hesiod,
 or local flat-file mappings.  You should create an
diff --git a/share/man/man8/man8.amiga/boot_amiga.8 b/share/man/man8/man8.amiga/boot_amiga.8
index f61661aae08..9880e7709dc 100644
--- a/share/man/man8/man8.amiga/boot_amiga.8
+++ b/share/man/man8/man8.amiga/boot_amiga.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_amiga.8,v 1.2 2001/08/20 06:09:32 mpech Exp $
+.\"	$OpenBSD: boot_amiga.8,v 1.3 2001/10/04 16:56:52 mpech Exp $
 .\"	$NetBSD: boot_Amiga.8,v 1.1 1995/07/02 02:09:52 briggs Exp $
 .\"
 .\" Copyright (c) 1990, 1991 The Regents of the University of California.
@@ -72,8 +72,6 @@ configured dump device (which will be automatically recovered with
 during the next boot cycle).
 After the dump completes (successful
 or not), the system will attempt a reboot.
-.Pp
-.Pp
 .Ss The boot application
 The boot application runs in the native OS on the system.
 It has a
diff --git a/share/man/man8/man8.hp300/boot_hp300.8 b/share/man/man8/man8.hp300/boot_hp300.8
index db95572f6c9..7a18433923b 100644
--- a/share/man/man8/man8.hp300/boot_hp300.8
+++ b/share/man/man8/man8.hp300/boot_hp300.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_hp300.8,v 1.1 2000/11/09 03:57:34 deraadt Exp $
+.\"	$OpenBSD: boot_hp300.8,v 1.2 2001/10/04 16:56:52 mpech Exp $
 .\"	$NetBSD: boot_hp300.8,v 1.3 1995/04/23 10:33:34 cgd Exp $
 .\"
 .\" Copyright (c) 1990, 1991, 1993
@@ -51,7 +51,6 @@ system bootstrapping procedures
 Normally, the system will reboot itself at power-up or after crashes.
 An automatic consistency check of the file systems will be performed,
 and unless this fails, the system will resume multi-user operations.
-.Pp
 .Ss Cold starts
 On an HP300, the boot procedure uses the boot ROM to load a boot program
 from an
diff --git a/share/man/man8/man8.i386/boot_i386.8 b/share/man/man8/man8.i386/boot_i386.8
index 02e4fd26697..47495864bff 100644
--- a/share/man/man8/man8.i386/boot_i386.8
+++ b/share/man/man8/man8.i386/boot_i386.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_i386.8,v 1.4 2001/08/20 06:09:32 mpech Exp $
+.\"	$OpenBSD: boot_i386.8,v 1.5 2001/10/04 16:56:52 mpech Exp $
 .\"
 .\" Copyright (c) 1997 Tobias Weingartner
 .\"
@@ -44,7 +44,6 @@ system bootstrapping procedures
 Normally, the system will reboot itself at power-up or after crashes.
 An automatic consistency check of the file systems will be performed,
 and unless this fails, the system will resume multi-user operations.
-.Pp
 .Ss Cold starts
 The
 .Tn "PC AT"
@@ -61,7 +60,6 @@ clones attempt to boot off the drive specified in the BIOS setup, or
 if it is an older BIOS, it will start with checking for a disk in floppy
 drive A (otherwise known as drive 0) first, and failing that, attempt to
 boot the hard disk C (otherwise known as hard disk controller 1, drive 0).
-.Pp
 .Ss Warm starts
 The BIOS loads the first block (at physical location: track 0, head 0,
 sector 1) off the boot device into memory, and if the last two bytes in the
diff --git a/share/man/man8/man8.mac68k/boot_mac68k.8 b/share/man/man8/man8.mac68k/boot_mac68k.8
index 6bb34602100..93e913d8436 100644
--- a/share/man/man8/man8.mac68k/boot_mac68k.8
+++ b/share/man/man8/man8.mac68k/boot_mac68k.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_mac68k.8,v 1.2 2001/08/20 06:09:32 mpech Exp $
+.\"	$OpenBSD: boot_mac68k.8,v 1.3 2001/10/04 16:56:52 mpech Exp $
 .\"	$NetBSD: boot_mac68k.8,v 1.1 1995/07/02 02:09:52 briggs Exp $
 .\"
 .\" Copyright (c) 1990, 1991 The Regents of the University of California.
@@ -90,7 +90,6 @@ without intervention.
 When a system is so configured, it can crash
 or lose power and reboot back to a fully multi-user state without
 any intervention.
-.Pp
 .Ss The boot application
 The boot application runs in the native OS on the system.
 It has a
diff --git a/share/man/man8/man8.pmax/boot_pmax.8 b/share/man/man8/man8.pmax/boot_pmax.8
index 0798405c7f6..75caec4aacc 100644
--- a/share/man/man8/man8.pmax/boot_pmax.8
+++ b/share/man/man8/man8.pmax/boot_pmax.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_pmax.8,v 1.2 2001/08/20 06:09:32 mpech Exp $
+.\"	$OpenBSD: boot_pmax.8,v 1.3 2001/10/04 16:56:52 mpech Exp $
 .\"	$NetBSD: boot_pmax.8,v 1.1 1995/04/25 23:55:11 mellon Exp $
 .\"
 .\" Copyright (c) 1990, 1991 The Regents of the University of California.
@@ -52,12 +52,10 @@ and transferring to the entry point.
 Since the system is not reenterable,
 it is necessary to read it in from disk or tape
 each time it is to be bootstrapped.
-.Pp
 .Ss Power fail and crash recovery
 Normally, the system will boot itself at power-up or after crashes.
 An automatic consistency check of the file systems will be performed,
 and unless this fails, the system will resume multi-user operations.
-.Pp
 .Ss Cold starts
 At power up, all DECstation ROMs consult the
 .Nm haltaction
diff --git a/share/man/man8/man8.sparc/boot_sparc.8 b/share/man/man8/man8.sparc/boot_sparc.8
index ef4f7491a4e..bae9f097624 100644
--- a/share/man/man8/man8.sparc/boot_sparc.8
+++ b/share/man/man8/man8.sparc/boot_sparc.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_sparc.8,v 1.1 2000/11/09 03:57:35 deraadt Exp $
+.\"	$OpenBSD: boot_sparc.8,v 1.2 2001/10/04 16:56:52 mpech Exp $
 .\"	$NetBSD: boot_sparc.8,v 1.4 1995/04/25 11:37:25 pk Exp $
 .\"
 .\" Copyright (c) 1992, 1993
@@ -49,7 +49,6 @@ An automatic consistency check of the file systems will be performed
 (as described in
 .Xr fsck 8 ) ,
 and unless this fails, the system will resume multi-user operations.
-.Pp
 .Ss Cold starts
 System boot blocks are installed near the start of the boot disk
 using the procedure described in
diff --git a/share/man/man8/man8.sun3/boot_sun3.8 b/share/man/man8/man8.sun3/boot_sun3.8
index a16aa93d13d..a812246ab07 100644
--- a/share/man/man8/man8.sun3/boot_sun3.8
+++ b/share/man/man8/man8.sun3/boot_sun3.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_sun3.8,v 1.1 2000/11/09 03:57:35 deraadt Exp $
+.\"	$OpenBSD: boot_sun3.8,v 1.2 2001/10/04 16:56:52 mpech Exp $
 .\"	$NetBSD: boot_sun3.8,v 1.1 1995/08/08 20:46:20 gwr Exp $
 .\"
 .\" Copyright (c) 1992, 1993
@@ -49,7 +49,6 @@ An automatic consistency check of the file systems will be performed
 as described in
 .Xr fsck 8 .
 and unless this fails, the system will resume multi-user operations.
-.Pp
 .Ss Cold starts
 A disk-boot program
 .Pq Pa /usr/mdec/ufsboot
diff --git a/share/man/man8/man8.vax/boot_vax.8 b/share/man/man8/man8.vax/boot_vax.8
index 047b3111212..d1a80ea6ed4 100644
--- a/share/man/man8/man8.vax/boot_vax.8
+++ b/share/man/man8/man8.vax/boot_vax.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_vax.8,v 1.1 2000/11/09 03:57:35 deraadt Exp $
+.\"	$OpenBSD: boot_vax.8,v 1.2 2001/10/04 16:56:52 mpech Exp $
 .\"	$NetBSD: boot_vax.8,v 1.3 1995/04/23 10:33:39 cgd Exp $
 .\"
 .\" Copyright (c) 1980, 1991, 1993
@@ -48,7 +48,6 @@ Normally, the system will reboot itself at power-up or after crashes.
 Provided the auto-restart is enabled on the machine's front panel,
 an automatic consistency check of the file systems will be performed,
 and unless this fails, the system will resume multi-user operations.
-.Pp
 .Ss Cold starts
 These are processor-type dependent.
 On an 11/780, there are two floppy files for each disk controller,
diff --git a/share/man/man8/man8.vax/format.8 b/share/man/man8/man8.vax/format.8
index 01f8223ef77..ed21ce86639 100644
--- a/share/man/man8/man8.vax/format.8
+++ b/share/man/man8/man8.vax/format.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: format.8,v 1.8 2001/08/03 15:21:17 mpech Exp $
+.\"	$OpenBSD: format.8,v 1.9 2001/10/04 16:56:52 mpech Exp $
 .\" Copyright (c) 1980, 1983 The Regents of the University of California.
 .\" All rights reserved.
 .\"
@@ -249,7 +249,6 @@ disks.
 You should shut down UNIX and halt the machine to do any disk formatting.
 Make certain you put in the pack you want formatted.  It is also a good idea
 to spin down or write protect the disks you don't want to format, just in case.
-.Pp
 .Ss Formatting an RK07
 Load the console floppy labeled, "RX11 VAX DSK LD DEV #1" in
 the console disk drive, and type the following commands:
@@ -264,7 +263,6 @@ DS>SELECT DMA0
 DS>LOAD EVRAC
 DS>START/SEC:PACKINIT
 .Ed
-.Pp
 .Ss Formatting an RP0X
 Follow the above procedures except that the
 ATTACH and SELECT lines should read:
@@ -276,7 +274,6 @@ DS>SELECT DBA0
 .Ed
 .Pp
 This is for drive 0 on mba0; use 9 instead of 8 for mba1, etc.
-.Pp
 .Ss Formatting an RM0X
 Follow the above procedures except that the
 ATTACH and SELECT lines should read:
diff --git a/share/man/man8/release.8 b/share/man/man8/release.8
index c5f900e2e72..4d693b5e611 100644
--- a/share/man/man8/release.8
+++ b/share/man/man8/release.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: release.8,v 1.17 2001/09/18 03:59:16 marc Exp $
+.\"	$OpenBSD: release.8,v 1.18 2001/10/04 16:56:52 mpech Exp $
 .\"
 .\"	Copyright (c) 2000 Marco S. Hyman
 .\"
@@ -40,7 +40,6 @@ Make the third party packages.
 .Pp
 The following sections describe each of the required steps in detail.
 .Ss "1. Update sources"
-.Pp
 A
 .Nm
 should always start from a known set of
@@ -115,7 +114,6 @@ See
 for more information.
 .Ed
 .Ss "2. Build and install a new kernel"
-.Pp
 For safety, you should always build and install a new kernel before
 building the programs that will use the kernel.
 This ensures that any new system calls, for example, will be present
@@ -168,7 +166,6 @@ is your friend.
 If the system does not come up you can boot using
 .Pa bsd.old .
 .Ss "3. Build a new system"
-.Pp
 Now that you are running using your new kernel you can build a new system.
 It's safer (but slower) to remove and re-build your object directories
 and re-building them before the build.
@@ -207,7 +204,6 @@ by hand.
 At this point your system is up-to-date and running the code that you
 are going to make into a release.
 .Ss "4. Make and validate the system release"
-.Pp
 The system release consists of a generic kernel, one
 .Tn CD\-ROM
 and two floppy boot-able file-systems, the release
@@ -288,7 +284,6 @@ release.
 The only thing missing is the X Window System
 (which is covered in the next section).
 .Ss "5. Build and install XF4"
-.Pp
 The
 .Va XF4
 tree is primarily
@@ -353,7 +348,6 @@ to
 .Pa xdm
 after the build.
 .Ss "6. Make and validate the XF4 release"
-.Pp
 .Va XF4
 uses the same
 .Va DESTDIR
@@ -395,7 +389,6 @@ system and X Window System
 .Sq tarballs
 in your release directory.
 .Ss "7. Make the third party packages"
-.Pp
 The
 .Sq ports
 sub-system of contributed applications is described in
diff --git a/share/man/man8/vpn.8 b/share/man/man8/vpn.8
index b7d57415090..c4901cd6cb1 100644
--- a/share/man/man8/vpn.8
+++ b/share/man/man8/vpn.8
@@ -1,4 +1,4 @@
-.\" $OpenBSD: vpn.8,v 1.54 2001/10/04 10:28:20 wilfried Exp $
+.\" $OpenBSD: vpn.8,v 1.55 2001/10/04 16:56:52 mpech Exp $
 .\"
 .\" Copyright 1998 Niels Provos <provos@physnet.uni-hamburg.de>
 .\" All rights reserved.
@@ -104,8 +104,6 @@ required:
 .Pp
 For more permanent operation, these options should be enabled in your
 .Xr sysctl.conf 5 .
-.Pp
-
 .Ss Generating Manual Keys [manual keying]
 The shared secret symmetric keys used to create a VPN can
 be any hexadecimal value, so long as both sides of the connection use
@@ -166,7 +164,6 @@ options may be used to specify the keys directly in the
 command line.  However, another user could view the keys by using the
 .Xr ps 1
 command at the appropriate time (or use a program for doing so).
-.Pp
 .Ss Creating IPsec Flows [manual keying]
 Both IPsec gateways need to configure
 .Xr ipsec 4
@@ -247,7 +244,6 @@ and on the security gateway of subnet B:
 	          B_EXTERNAL_IP 255.255.255.255
 	    -in -require -src B_EXTERNAL_IP
 .Ed
-.Pp
 .Ss Configure and run the keying daemon [automated keying]
 Unless manual keying is used, both security gateways need to start
 either the
diff --git a/share/man/man9/pool.9 b/share/man/man9/pool.9
index 7f602ab3f97..c089f240e03 100644
--- a/share/man/man9/pool.9
+++ b/share/man/man9/pool.9
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: pool.9,v 1.13 2001/08/21 18:27:12 krw Exp $
+.\"	$OpenBSD: pool.9,v 1.14 2001/10/04 16:56:52 mpech Exp $
 .\"	$NetBSD: pool.9,v 1.18 2001/06/21 11:59:01 wiz Exp $
 .\"
 .\" Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
@@ -161,7 +161,7 @@ and
 .Fn prelease
 when allocating or releasing memory pages.
 .El
-.Pp
+.\".Pp
 .\"The macro
 .\".Fn POOL_STORAGE_SIZE "size" "nitems"
 .\"can be used to determine the amount of storage needed to setup a pool,