diff options
author | Mats O Jansson <maja@cvs.openbsd.org> | 1997-09-10 11:58:36 +0000 |
---|---|---|
committer | Mats O Jansson <maja@cvs.openbsd.org> | 1997-09-10 11:58:36 +0000 |
commit | 663d76b808b184462dd249f52963bdc5d9ff84f7 (patch) | |
tree | 59676b8e3e8c3511867a7b44a3a647e7b3112258 /sys/arch/vax | |
parent | 6872085ee6a866a1f903e87bab7d09e8720640c2 (diff) |
Sync with NetBSD 970516. -moj
Diffstat (limited to 'sys/arch/vax')
-rw-r--r-- | sys/arch/vax/uba/dl.c | 492 | ||||
-rw-r--r-- | sys/arch/vax/uba/dlreg.h | 82 | ||||
-rw-r--r-- | sys/arch/vax/uba/uda.c | 6 |
3 files changed, 578 insertions, 2 deletions
diff --git a/sys/arch/vax/uba/dl.c b/sys/arch/vax/uba/dl.c new file mode 100644 index 00000000000..f9d355ae2ab --- /dev/null +++ b/sys/arch/vax/uba/dl.c @@ -0,0 +1,492 @@ +/* $NetBSD: dl.c,v 1.1 1997/02/04 19:13:18 ragge Exp $ */ +/* + * Copyright (c) 1997 Ben Harris. All rights reserved. + * Copyright (c) 1996 Ken C. Wellsch. All rights reserved. + * Copyright (c) 1995, 1996 Jason R. Thorpe. All rights reserved. + * Copyright (c) 1982, 1986, 1990, 1992, 1993 + * The Regents of the University of California. All rights reserved. + * + * This code is derived from software contributed to Berkeley by + * Ralph Campbell and Rick Macklem. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +/* + * dl.c -- Device driver for the DL11 and DLV11 serial cards. + * + * OS-interface code derived from the dz and dca (hp300) drivers. + */ + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/ioctl.h> +#include <sys/tty.h> +#include <sys/proc.h> +#include <sys/map.h> +#include <sys/buf.h> +#include <sys/conf.h> +#include <sys/file.h> +#include <sys/uio.h> +#include <sys/kernel.h> +#include <sys/syslog.h> +#include <sys/device.h> + +#include <machine/pte.h> +#include <machine/trap.h> + +#include <vax/uba/ubareg.h> +#include <vax/uba/ubavar.h> + +#include <vax/uba/dlreg.h> + +#define DL_I2C(i) (i) +#define DL_C2I(c) (c) + +struct dl_softc { + struct device sc_dev; + dlregs* sc_addr; + struct tty* sc_tty; +}; + +static int dl_match __P((struct device *, void *, void *)); +static void dl_attach __P((struct device *, struct device *, void *)); +static void dlrint __P((int)); +static void dlxint __P((int)); +static void dlstart __P((struct tty *)); +static int dlparam __P((struct tty *, struct termios *)); +static void dlbrk __P((struct dl_softc *, int)); +struct tty * dltty __P((dev_t)); + int dlopen __P((dev_t, int, int, struct proc *)); + int dlclose __P((dev_t, int, int, struct proc *)); + int dlread __P((dev_t, struct uio *, int)); + int dlwrite __P((dev_t, struct uio *, int)); + int dlioctl __P((dev_t, int, caddr_t, int, struct proc *)); + void dlstop __P((struct tty *, int)); + +struct cfdriver dl_cd = { + NULL, "dl", DV_TTY +}; + +struct cfattach dl_ca = { + sizeof(struct dl_softc), dl_match, dl_attach +}; + +/* Autoconfig handles: setup the controller to interrupt, */ +/* then complete the housecleaning for full operation */ + +static int +dl_match (parent, match, aux) + struct device * parent; + void *match, *aux; +{ + struct uba_attach_args *ua = aux; + register dlregs *dladdr; + + dladdr = (dlregs*) ua->ua_addr; +#ifdef DL_DEBUG + printf("Probing for dl at %lo ... ", (long)dladdr); +#endif + + dladdr->dl_xcsr = DL_XCSR_TXIE; + if (dladdr->dl_xcsr != (DL_XCSR_TXIE | DL_XCSR_TX_READY)) { +#ifdef DL_DEBUG + printf("failed (step 1; XCSR = %.4b)\n", dladdr->dl_xcsr, + DL_XCSR_BITS); +#endif + return 0; + } + + /* + * We have to force an interrupt so the uba driver can work + * out where we are. Unfortunately, the only way to make a + * DL11 interrupt is to get it to send or receive a + * character. We'll send a NUL and hope it doesn't hurt + * anything. + */ + + dladdr->u_xbuf.bytes.byte_lo = '\0'; +#if 0 /* This test seems to fail 2/3 of the time :-( */ + if (dladdr->dl_xcsr != (DL_XCSR_TXIE)) { +#ifdef DL_DEBUG + printf("failed (step 2; XCSR = %.4b)\n", dladdr->dl_xcsr, + DL_XCSR_BITS); +#endif + return 0; + } +#endif + DELAY(100000); /* delay 1/10 s for character to transmit */ + if (dladdr->dl_xcsr != (DL_XCSR_TXIE | DL_XCSR_TX_READY)) { +#ifdef DL_DEBUG + printf("failed (step 3; XCSR = %.4b)\n", dladdr->dl_xcsr, + DL_XCSR_BITS); +#endif + return 0; + } + + /* Register the TX interrupt handler */ + ua->ua_ivec = dlxint; + + /* What else do I need to do? */ + + return 1; + +} + +static void +dl_attach (parent, self, aux) + struct device *parent, *self; + void *aux; +{ + struct uba_softc *uh = (void *)parent; + struct dl_softc *sc = (void *)self; + register struct uba_attach_args *ua = aux; + register dlregs *dladdr; + + dladdr = (dlregs *) ua->ua_addr; + sc->sc_addr = dladdr; + + /* Tidy up the device */ + + dladdr->dl_rcsr = DL_RCSR_RXIE; + dladdr->dl_xcsr = DL_XCSR_TXIE; + + /* Initialize our softc structure. Should be done in open? */ + + sc->sc_tty = ttymalloc(); + tty_attach(sc->sc_tty); + + /* Now register the RX interrupt handler */ + ubasetvec(self, ua->ua_cvec-1, dlrint); + + printf("\n"); + return; +} + +/* Receiver Interrupt Handler */ + +static void +dlrint(cntlr) + int cntlr; +{ + struct dl_softc *sc = dl_cd.cd_devs[cntlr]; + volatile dlregs *dladdr; + register struct tty *tp; + register int cc; + register unsigned c; + + dladdr = sc->sc_addr; + + if (dladdr->dl_rcsr & DL_RCSR_RX_DONE) { + c = dladdr->dl_rbuf; + cc = c & 0xFF; + tp = sc->sc_tty; + + if (!(tp->t_state & TS_ISOPEN)) { + wakeup((caddr_t)&tp->t_rawq); + return; + } + + if (c & DL_RBUF_OVERRUN_ERR) + /* + * XXX: This should really be logged somwhere + * else where we can afford the time. + */ + log(LOG_WARNING, "%s: rx overrun\n", + sc->sc_dev.dv_xname); + if (c & DL_RBUF_FRAMING_ERR) + cc |= TTY_FE; + if (c & DL_RBUF_PARITY_ERR) + cc |= TTY_PE; + + (*linesw[tp->t_line].l_rint)(cc, tp); + } else + log(LOG_WARNING, "%s: stray rx interrupt\n", + sc->sc_dev.dv_xname); + return; +} + +/* Transmitter Interrupt Handler */ + +static void +dlxint(cntlr) + int cntlr; +{ + struct dl_softc *sc = dl_cd.cd_devs[cntlr]; + volatile dlregs *dladdr; + register struct tty *tp; + + dladdr = sc->sc_addr; + tp = sc->sc_tty; + tp->t_state &= ~(TS_BUSY | TS_FLUSH); + if (tp->t_line) + (*linesw[tp->t_line].l_start)(tp); + else + dlstart(tp); + + return; +} + +int +dlopen(dev, flag, mode, p) + dev_t dev; + int flag, mode; + struct proc *p; +{ + register struct tty *tp; + register int unit; + struct dl_softc *sc; + int s, error = 0; + + unit = DL_I2C(minor(dev)); + + if (unit >= dl_cd.cd_ndevs || dl_cd.cd_devs[unit] == NULL) + return ENXIO; + sc = dl_cd.cd_devs[unit]; + + tp = sc->sc_tty; + if (tp == NULL) + return ENODEV; + tp->t_oproc = dlstart; + tp->t_param = dlparam; + tp->t_dev = dev; + + if (!(tp->t_state & TS_ISOPEN)) { + tp->t_state |= TS_WOPEN; + ttychars(tp); + tp->t_iflag = TTYDEF_IFLAG; + tp->t_oflag = TTYDEF_OFLAG; + /* No modem control, so set CLOCAL. */ + tp->t_cflag = TTYDEF_CFLAG | CLOCAL; + tp->t_lflag = TTYDEF_LFLAG; + tp->t_ispeed = tp->t_ospeed = TTYDEF_SPEED; + + dlparam(tp, &tp->t_termios); + ttsetwater(tp); + + } else if ((tp->t_state & TS_XCLUDE) && p->p_ucred->cr_uid != 0) + return EBUSY; + + return ((*linesw[tp->t_line].l_open)(dev, tp)); +} + +/*ARGSUSED*/ +int +dlclose(dev, flag, mode, p) + dev_t dev; + int flag, mode; + struct proc *p; +{ + struct dl_softc *sc; + register struct tty *tp; + register int unit; + + unit = DL_I2C(minor(dev)); + sc = dl_cd.cd_devs[unit]; + tp = sc->sc_tty; + + (*linesw[tp->t_line].l_close)(tp, flag); + + /* Make sure a BREAK state is not left enabled. */ + dlbrk(sc, 0); + + return (ttyclose(tp)); +} + +int +dlread(dev, uio, flag) + dev_t dev; + struct uio *uio; + int flag; +{ + register struct tty *tp; + struct dl_softc *sc; + register int unit; + + unit = DL_I2C(minor(dev)); + sc = dl_cd.cd_devs[unit]; + tp = sc->sc_tty; + return ((*linesw[tp->t_line].l_read)(tp, uio, flag)); +} + +int +dlwrite(dev, uio, flag) + dev_t dev; + struct uio *uio; + int flag; +{ + register struct tty *tp; + struct dl_softc *sc; + register int unit; + + unit = DL_I2C(minor(dev)); + sc = dl_cd.cd_devs[unit]; + tp = sc->sc_tty; + return ((*linesw[tp->t_line].l_write)(tp, uio, flag)); +} + +int +dlioctl(dev, cmd, data, flag, p) + dev_t dev; + int cmd; + caddr_t data; + int flag; + struct proc *p; +{ + struct dl_softc *sc; + register struct tty *tp; + register int unit; + int error; + + unit = DL_I2C(minor(dev)); + sc = dl_cd.cd_devs[unit]; + tp = sc->sc_tty; + + error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p); + if (error >= 0) + return (error); + error = ttioctl(tp, cmd, data, flag, p); + if (error >= 0) + return (error); + + switch (cmd) { + + case TIOCSBRK: + dlbrk(sc, 1); + break; + + case TIOCCBRK: + dlbrk(sc, 0); + break; + + case TIOCMGET: + /* No modem control, assume they're all low. */ + *(int *)data = 0; + break; + + default: + return (ENOTTY); + } + return (0); +} + +struct tty * +dltty(dev) + dev_t dev; +{ + register struct dl_softc* sc; + + sc = dl_cd.cd_devs[DL_I2C(minor(dev))]; + return sc->sc_tty; +} + +void +dlstop(tp, flag) + register struct tty *tp; + int flag; +{ + register struct dl_softc *sc; + int unit, s; + + unit = DL_I2C(minor(tp->t_dev)); + sc = dl_cd.cd_devs[unit]; + + s = spltty(); + + if (tp->t_state & TS_BUSY) + if (!(tp->t_state & TS_TTSTOP)) + tp->t_state |= TS_FLUSH; + splx(s); +} + +static void +dlstart(tp) + register struct tty *tp; +{ + register struct dl_softc *sc; + register dlregs *dladdr; + register int unit, cc; + int s; + + unit = DL_I2C(minor(tp->t_dev)); + sc = dl_cd.cd_devs[unit]; + + s = spltty(); + if (tp->t_state & (TS_TIMEOUT|TS_BUSY|TS_TTSTOP)) + goto out; + if (tp->t_outq.c_cc <= tp->t_lowat) { + if (tp->t_state & TS_ASLEEP) { + tp->t_state &= ~TS_ASLEEP; + wakeup((caddr_t)&tp->t_outq); + } + selwakeup(&tp->t_wsel); + } + if (tp->t_outq.c_cc == 0) + goto out; + + dladdr = sc->sc_addr; + + if (dladdr->dl_xcsr & DL_XCSR_TX_READY) { + tp->t_state |= TS_BUSY; + dladdr->u_xbuf.bytes.byte_lo = getc(&tp->t_outq); + } +out: + splx(s); + return; +} + +/*ARGSUSED*/ +static int +dlparam(tp, t) + register struct tty *tp; + register struct termios *t; +{ + /* + * All this kind of stuff (speed, character format, whatever) + * is set by jumpers on the card. Changing it is thus rather + * tricky for a mere device driver. + */ + return 0; +} + +static void +dlbrk(sc, state) + register struct dl_softc *sc; + int state; +{ + register dlregs *dladdr; + int s; + dladdr = sc->sc_addr; + s = spltty(); + if (state) + dladdr->dl_xcsr |= DL_XCSR_TX_BREAK; + else + dladdr->dl_xcsr &= ~DL_XCSR_TX_BREAK; + splx(s); +} diff --git a/sys/arch/vax/uba/dlreg.h b/sys/arch/vax/uba/dlreg.h new file mode 100644 index 00000000000..d3d007b72b9 --- /dev/null +++ b/sys/arch/vax/uba/dlreg.h @@ -0,0 +1,82 @@ +/* $NetBSD: dlreg.h,v 1.1 1997/02/04 19:13:19 ragge Exp $ */ +/* + * Copyright (c) 1997 Ben Harris. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Ben Harris. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +/* + * dlreg.h -- Definitions for the DL11 and DLV11 serial cards. + * + * Style in imitation of dzreg.h. + */ + +union w_b +{ + u_short word; + struct { + u_char byte_lo; + u_char byte_hi; + } bytes; +}; + +struct DLregs +{ + volatile u_short dl_rcsr; /* Receive Control/Status Register (R/W) */ + volatile u_short dl_rbuf; /* Receive Buffer (R) */ + volatile u_short dl_xcsr; /* Transmit Control/Status Register (R/W) */ + volatile union w_b u_xbuf; /* Transmit Buffer (W) */ +#define dl_xbuf u_xbuf.bytes.byte_lo +}; + +typedef struct DLregs dlregs; + +/* RCSR bits */ + +#define DL_RCSR_RX_DONE 0x0080 /* Receiver Done (R) */ +#define DL_RCSR_RXIE 0x0040 /* Receiver Interrupt Enable (R/W) */ +#define DL_RCSR_READER_ENABLE 0x0001 /* [paper-tape] Reader Enable (W) */ +#define DL_RCSR_BITS "\20\1READER_ENABLE\7RXIE\10RX_DONE\n" + +/* RBUF bits */ + +#define DL_RBUF_ERR 0x8000 /* Error (R) */ +#define DL_RBUF_OVERRUN_ERR 0x4000 /* Overrun Error (R) */ +#define DL_RBUF_FRAMING_ERR 0x2000 /* Framing Error (R) */ +#define DL_RBUF_PARITY_ERR 0x1000 /* Parity Error (R) */ +#define DL_RBUF_DATA_MASK 0x00FF /* Receive Data (R) */ +#define DL_RBUF_BITS "\20\15PARITY_ERR\16FRAMING_ERR\17OVERRUN_ERR\20ERR\n" + +/* XCSR bits */ + +#define DL_XCSR_TX_READY 0x0080 /* Transmitter Ready (R) */ +#define DL_XCSR_TXIE 0x0040 /* Transmit Interrupt Enable (R/W) */ +#define DL_XCSR_TX_BREAK 0x0001 /* Transmit Break (R/W) */ +#define DL_XCSR_BITS "\20\1TX_BREAK\7TXIE\10TX_READY\n" + +/* XBUF is just data byte right justified. */ diff --git a/sys/arch/vax/uba/uda.c b/sys/arch/vax/uba/uda.c index 35cdf5299bf..fbcc98993be 100644 --- a/sys/arch/vax/uba/uda.c +++ b/sys/arch/vax/uba/uda.c @@ -1,5 +1,5 @@ -/* $OpenBSD: uda.c,v 1.7 1997/05/29 00:05:11 niklas Exp $ */ -/* $NetBSD: uda.c,v 1.23 1996/10/13 03:35:26 christos Exp $ */ +/* $OpenBSD: uda.c,v 1.8 1997/09/10 11:58:35 maja Exp $ */ +/* $NetBSD: uda.c,v 1.24 1997/03/12 19:42:30 ragge Exp $ */ /* * Copyright (c) 1996 Ludd, University of Lule}, Sweden. * Copyright (c) 1988 Regents of the University of California. @@ -403,10 +403,12 @@ udasaerror(usc, doreset) printf("%s: controller error, sa=0%o (%s%s)\n", sc->sc_dev.dv_xname, code, e->desc + 1, *e->desc == 'E' ? " error" : ""); +#if 0 /* XXX we just avoid panic when autoconfig non-existent KFQSA devices */ if (doreset) { mscp_requeue(sc->sc_softc); /* (void) udainit(sc); XXX */ } +#endif } /* |