Use regulalator API instead of private functions.

2 files changed, 6 insertions, 65 deletions

diff --git a/sys/arch/armv7/imx/imxehci.c b/sys/arch/armv7/imx/imxehci.c
index 26e09fee39d..89fe44d0edd 100644
--- a/sys/arch/armv7/imx/imxehci.c
+++ b/sys/arch/armv7/imx/imxehci.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: imxehci.c,v 1.16 2016/08/06 17:18:38 kettenis Exp $ */
+/*	$OpenBSD: imxehci.c,v 1.17 2016/08/13 11:08:58 kettenis Exp $ */
 /*
  * Copyright (c) 2012-2013 Patrick Wildt <patrick@blueri.se>
  *
@@ -37,6 +37,7 @@
 #include <dev/ofw/openfirm.h>
 #include <dev/ofw/ofw_gpio.h>
 #include <dev/ofw/ofw_pinctrl.h>
+#include <dev/ofw/ofw_regulator.h>
 #include <dev/ofw/fdt.h>
 
 #include <dev/usb/ehcireg.h>
@@ -75,8 +76,6 @@ int	imxehci_match(struct device *, void *, void *);
 void	imxehci_attach(struct device *, struct device *, void *);
 int	imxehci_detach(struct device *, int);
 
-void	imxehci_enable_vbus(uint32_t);
-
 struct imxehci_softc {
 	struct ehci_softc	sc;
 	void			*sc_ih;
@@ -180,7 +179,7 @@ imxehci_attach(struct device *parent, struct device *self, void *aux)
 	/* enable usb bus power */
 	vbus = OF_getpropint(faa->fa_node, "vbus-supply", 0);
 	if (vbus)
-		imxehci_enable_vbus(vbus);
+		regulator_enable(vbus);
 
 	switch (misc[1]) {
 	case 0:
@@ -310,32 +309,3 @@ imxehci_detach(struct device *self, int flags)
 
 	return (0);
 }
-
-void
-imxehci_enable_vbus(uint32_t phandle)
-{
-	uint32_t gpio[3];
-	int active;
-	int node;
-
-	node = OF_getnodebyphandle(phandle);
-	if (node == 0)
-		return;
-
-	if (!OF_is_compatible(node, "regulator-fixed"))
-		return;
-
-	pinctrl_byname(node, "default");
-
-	if (OF_getproplen(node, "enable-active-high") == 0)
-		active = 1;
-	else
-		active = 0;
-
-	if (OF_getpropintarray(node, "gpio", gpio,
-	    sizeof(gpio)) != sizeof(gpio))
-		return;
-	
-	gpio_controller_config_pin(gpio, GPIO_CONFIG_OUTPUT);
-	gpio_controller_set_pin(gpio, active);
-}
diff --git a/sys/arch/armv7/imx/imxesdhc.c b/sys/arch/armv7/imx/imxesdhc.c
index a50ab69547c..b6ff3455aaa 100644
--- a/sys/arch/armv7/imx/imxesdhc.c
+++ b/sys/arch/armv7/imx/imxesdhc.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: imxesdhc.c,v 1.29 2016/08/08 10:10:56 kettenis Exp $	*/
+/*	$OpenBSD: imxesdhc.c,v 1.30 2016/08/13 11:08:58 kettenis Exp $	*/
 /*
  * Copyright (c) 2009 Dale Rahn <drahn@openbsd.org>
  * Copyright (c) 2006 Uwe Stuehler <uwe@openbsd.org>
@@ -38,6 +38,7 @@
 #include <dev/ofw/openfirm.h>
 #include <dev/ofw/ofw_gpio.h>
 #include <dev/ofw/ofw_pinctrl.h>
+#include <dev/ofw/ofw_regulator.h>
 #include <dev/ofw/fdt.h>
 
 /* registers */
@@ -207,7 +208,6 @@ int	imxesdhc_host_found(struct imxesdhc_softc *, bus_space_tag_t,
 void	imxesdhc_shutdown(void *);
 int	imxesdhc_intr(void *);
 
-void	imxesdhc_enable_vbus(uint32_t);
 void	imxesdhc_clock_enable(uint32_t);
 void	imxesdhc_pwrseq_pre(uint32_t);
 void	imxesdhc_pwrseq_post(uint32_t);
@@ -459,35 +459,6 @@ err:
 }
 
 void
-imxesdhc_enable_vbus(uint32_t phandle)
-{
-	uint32_t gpio[3];
-	int active;
-	int node;
-
-	node = OF_getnodebyphandle(phandle);
-	if (node == 0)
-		return;
-
-	if (!OF_is_compatible(node, "regulator-fixed"))
-		return;
-
-	pinctrl_byname(node, "default");
-
-	if (OF_getproplen(node, "enable-active-high") == 0)
-		active = 1;
-	else
-		active = 0;
-
-	if (OF_getpropintarray(node, "gpio", gpio,
-	    sizeof(gpio)) != sizeof(gpio))
-		return;
-	
-	gpio_controller_config_pin(gpio, GPIO_CONFIG_OUTPUT);
-	gpio_controller_set_pin(gpio, active);
-}
-
-void
 imxesdhc_clock_enable(uint32_t phandle)
 {
 	uint32_t gpios[3];
@@ -698,7 +669,7 @@ imxesdhc_bus_power(sdmmc_chipset_handle_t sch, uint32_t ocr)
 
 	/* enable mmc power */
 	if (sc->sc_vmmc && vdd > 0)
-		imxesdhc_enable_vbus(sc->sc_vmmc);
+		regulator_enable(sc->sc_vmmc);
 
 	if (sc->sc_vdd == 0 && vdd > 0)
 		imxesdhc_pwrseq_post(sc->sc_pwrseq);