goes in dev/ic

1 files changed, 0 insertions, 74 deletions

diff --git a/sys/dev/isa/espreg.h b/sys/dev/isa/espreg.h
deleted file mode 100644
index 02993943b89..00000000000
--- a/sys/dev/isa/espreg.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*-
- * Copyright (c) 1995  Sean E. Fagin, John M Vinopal.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the author nor the names of contributors
- *    may be used to endorse or promote products derived from this software
- *    without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _ESPREG_H_
-#define	_ESPREG_H_
-
-/*
- * Definitions for Hayes ESP serial cards.
- */
-
-/*
- * CMD1 and CMD2 are the command ports, offsets from <esp_iobase>.
- */
-#define	ESP_CMD1	4
-#define	ESP_CMD2	5
-
-/*
- * STAT1 and STAT2 are to get return values and status bytes
- */
-#define	ESP_STATUS1	ESP_CMD1
-#define	ESP_STATUS2	ESP_CMD2
-
-/*
- * Commands.  Commands are given by writing the command value to
- * ESP_CMD1 and then writing or reading some number of bytes from
- * ESP_CMD2 or ESP_STATUS2.
- */
-#define	ESP_GETTEST	0x01	/* self-test command (1 byte + extras) */
-#define	ESP_GETDIPS	0x02	/* get on-board DIP switches (1 byte) */
-#define	ESP_SETFLOWTYPE	0x08	/* set type of flow-control (2 bytes) */
-#define	ESP_SETRXFLOW	0x0a	/* set Rx FIFO flow control levels (4 bytes) */
-#define	ESP_SETMODE	0x10	/* set board mode (1 byte) */
-
-/* Mode bits (ESP_SETMODE). */
-#define	ESP_MODE_FIFO	0x02	/* act like a 16550 (compatibility mode) */
-#define	ESP_MODE_RTS	0x04	/* use RTS hardware flow control */
-#define	ESP_MODE_SCALE	0x80	/* scale FIFO trigger levels */
-
-/* Flow control type bits (ESP_SETFLOWTYPE). */
-#define	ESP_FLOW_RTS	0x04	/* cmd1: local Rx sends RTS flow control */
-#define	ESP_FLOW_CTS	0x10	/* cmd2: local transmitter responds to CTS */
-
-/* Used by ESP_SETRXFLOW. */
-#define	RXHIGHWATER	768
-#define	RXLOWWATER	512
-#define	HIBYTE(w)	(((w) >> 8) & 0xff)
-#define	LOBYTE(w)	((w) & 0xff)
-
-#endif /* !_ESPREG_H_ */