update drm to linux 5.15.14

new hardware support includes

	Intel
ehl/Elkhart Lake (embedded)
jsl/Jasper Lake (atom)
rkl/Rocket Lake (desktop)

	AMD
van gogh APU (gfx1033)
yellow carp / rembrandt APU (gfx1035?)
        Ryzen 6000 APU
navy flounder / navi 22 (gfx1031)
        RX 6700, RX 6700 XT, RX 6700M, RX 6800M, RX 6850M XT
dimgrey cavefish / navi 23 (gfx1032)
        Pro W6600, Pro W6600M, RX 6600, RX 6600 XT, RX 6600M,
	RX 6600S, RX 6650M, RX 6650M XT, RX 6700S, RX 6800S
beige goby / navi 24 (gfx1034)
        RX 6500 XT, RX 6400, RX 6500M, RX 6300M

Thanks to the OpenBSD Foundation for sponsoring this work
niklas@ for helping with ttm and amdgpu and patrick@ for adapting
rockchip drm.

1 files changed, 63 insertions, 36 deletions

diff --git a/sys/dev/pci/drm/i915/display/vlv_dsi.c b/sys/dev/pci/drm/i915/display/vlv_dsi.c
index ef83384b5be..e3c33fad127 100644
--- a/sys/dev/pci/drm/i915/display/vlv_dsi.c
+++ b/sys/dev/pci/drm/i915/display/vlv_dsi.c
@@ -33,11 +33,14 @@
 #include "i915_drv.h"
 #include "intel_atomic.h"
 #include "intel_connector.h"
+#include "intel_crtc.h"
+#include "intel_de.h"
 #include "intel_display_types.h"
 #include "intel_dsi.h"
 #include "intel_fifo_underrun.h"
 #include "intel_panel.h"
 #include "intel_sideband.h"
+#include "skl_scaler.h"
 
 /* return pixels in terms of txbyteclkhs */
 static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count,
@@ -296,7 +299,7 @@ static int intel_dsi_compute_config(struct intel_encoder *encoder,
 	else
 		pipe_config->pipe_bpp = 18;
 
-	if (IS_GEN9_LP(dev_priv)) {
+	if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
 		/* Enable Frame time stamp based scanline reporting */
 		pipe_config->mode_flags |=
 			I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP;
@@ -521,7 +524,7 @@ static void intel_dsi_device_ready(struct intel_encoder *encoder)
 
 	if (IS_GEMINILAKE(dev_priv))
 		glk_dsi_device_ready(encoder);
-	else if (IS_GEN9_LP(dev_priv))
+	else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
 		bxt_dsi_device_ready(encoder);
 	else
 		vlv_dsi_device_ready(encoder);
@@ -600,7 +603,7 @@ static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder)
 	drm_dbg_kms(&dev_priv->drm, "\n");
 	for_each_dsi_port(port, intel_dsi->ports) {
 		/* Common bit for both MIPI Port A & MIPI Port C on VLV/CHV */
-		i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
+		i915_reg_t port_ctrl = IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) ?
 			BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(PORT_A);
 		u32 val;
 
@@ -620,7 +623,7 @@ static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder)
 		 * On VLV/CHV, wait till Clock lanes are in LP-00 state for MIPI
 		 * Port A only. MIPI Port C has no similar bit for checking.
 		 */
-		if ((IS_GEN9_LP(dev_priv) || port == PORT_A) &&
+		if ((IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) || port == PORT_A) &&
 		    intel_de_wait_for_clear(dev_priv, port_ctrl,
 					    AFE_LATCHOUT, 30))
 			drm_err(&dev_priv->drm, "DSI LP not going Low\n");
@@ -645,7 +648,7 @@ static void intel_dsi_port_enable(struct intel_encoder *encoder,
 
 	if (intel_dsi->dual_link == DSI_DUAL_LINK_FRONT_BACK) {
 		u32 temp;
-		if (IS_GEN9_LP(dev_priv)) {
+		if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
 			for_each_dsi_port(port, intel_dsi->ports) {
 				temp = intel_de_read(dev_priv,
 						     MIPI_CTRL(port));
@@ -665,7 +668,7 @@ static void intel_dsi_port_enable(struct intel_encoder *encoder,
 	}
 
 	for_each_dsi_port(port, intel_dsi->ports) {
-		i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
+		i915_reg_t port_ctrl = IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) ?
 			BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
 		u32 temp;
 
@@ -702,7 +705,7 @@ static void intel_dsi_port_disable(struct intel_encoder *encoder)
 	enum port port;
 
 	for_each_dsi_port(port, intel_dsi->ports) {
-		i915_reg_t port_ctrl = IS_GEN9_LP(dev_priv) ?
+		i915_reg_t port_ctrl = IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) ?
 			BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
 		u32 temp;
 
@@ -713,6 +716,19 @@ static void intel_dsi_port_disable(struct intel_encoder *encoder)
 	}
 }
 
+static void intel_dsi_wait_panel_power_cycle(struct intel_dsi *intel_dsi)
+{
+	ktime_t panel_power_on_time;
+	s64 panel_power_off_duration;
+
+	panel_power_on_time = ktime_get_boottime();
+	panel_power_off_duration = ktime_ms_delta(panel_power_on_time,
+						  intel_dsi->panel_power_off_time);
+
+	if (panel_power_off_duration < (s64)intel_dsi->panel_pwr_cycle_delay)
+		drm_msleep(intel_dsi->panel_pwr_cycle_delay - panel_power_off_duration);
+}
+
 static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
 			      const struct intel_crtc_state *pipe_config);
 static void intel_dsi_unprepare(struct intel_encoder *encoder);
@@ -764,23 +780,24 @@ static void intel_dsi_pre_enable(struct intel_atomic_state *state,
 				 const struct drm_connector_state *conn_state)
 {
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
-	struct drm_crtc *crtc = pipe_config->uapi.crtc;
-	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	enum pipe pipe = intel_crtc->pipe;
+	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	enum pipe pipe = crtc->pipe;
 	enum port port;
 	u32 val;
 	bool glk_cold_boot = false;
 
 	drm_dbg_kms(&dev_priv->drm, "\n");
 
+	intel_dsi_wait_panel_power_cycle(intel_dsi);
+
 	intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
 
 	/*
 	 * The BIOS may leave the PLL in a wonky state where it doesn't
 	 * lock. It needs to be fully powered down to fix it.
 	 */
-	if (IS_GEN9_LP(dev_priv)) {
+	if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
 		bxt_dsi_pll_disable(encoder);
 		bxt_dsi_pll_enable(encoder, pipe_config);
 	} else {
@@ -845,8 +862,10 @@ static void intel_dsi_pre_enable(struct intel_atomic_state *state,
 	/* Send initialization commands in LP mode */
 	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_INIT_OTP);
 
-	/* Enable port in pre-enable phase itself because as per hw team
-	 * recommendation, port should be enabled befor plane & pipe */
+	/*
+	 * Enable port in pre-enable phase itself because as per hw team
+	 * recommendation, port should be enabled before plane & pipe
+	 */
 	if (is_cmd_mode(intel_dsi)) {
 		for_each_dsi_port(port, intel_dsi->ports)
 			intel_de_write(dev_priv,
@@ -931,7 +950,7 @@ static void intel_dsi_post_disable(struct intel_atomic_state *state,
 
 	drm_dbg_kms(&dev_priv->drm, "\n");
 
-	if (IS_GEN9_LP(dev_priv)) {
+	if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
 		intel_crtc_vblank_off(old_crtc_state);
 
 		skl_scaler_disable(old_crtc_state);
@@ -970,7 +989,7 @@ static void intel_dsi_post_disable(struct intel_atomic_state *state,
 			       val & ~MIPIO_RST_CTRL);
 	}
 
-	if (IS_GEN9_LP(dev_priv)) {
+	if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
 		bxt_dsi_pll_disable(encoder);
 	} else {
 		u32 val;
@@ -988,11 +1007,14 @@ static void intel_dsi_post_disable(struct intel_atomic_state *state,
 	intel_dsi_msleep(intel_dsi, intel_dsi->panel_off_delay);
 	intel_dsi_vbt_exec_sequence(intel_dsi, MIPI_SEQ_POWER_OFF);
 
-	/*
-	 * FIXME As we do with eDP, just make a note of the time here
-	 * and perform the wait before the next panel power on.
-	 */
-	intel_dsi_msleep(intel_dsi, intel_dsi->panel_pwr_cycle_delay);
+	intel_dsi->panel_power_off_time = ktime_get_boottime();
+}
+
+static void intel_dsi_shutdown(struct intel_encoder *encoder)
+{
+	struct intel_dsi *intel_dsi = enc_to_intel_dsi(encoder);
+
+	intel_dsi_wait_panel_power_cycle(intel_dsi);
 }
 
 static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
@@ -1016,12 +1038,13 @@ static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
 	 * configuration, otherwise accessing DSI registers will hang the
 	 * machine. See BSpec North Display Engine registers/MIPI[BXT].
 	 */
-	if (IS_GEN9_LP(dev_priv) && !bxt_dsi_pll_is_enabled(dev_priv))
+	if ((IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) &&
+	    !bxt_dsi_pll_is_enabled(dev_priv))
 		goto out_put_power;
 
 	/* XXX: this only works for one DSI output */
 	for_each_dsi_port(port, intel_dsi->ports) {
-		i915_reg_t ctrl_reg = IS_GEN9_LP(dev_priv) ?
+		i915_reg_t ctrl_reg = IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) ?
 			BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
 		bool enabled = intel_de_read(dev_priv, ctrl_reg) & DPI_ENABLE;
 
@@ -1047,7 +1070,7 @@ static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
 		if (!(intel_de_read(dev_priv, MIPI_DEVICE_READY(port)) & DEVICE_READY))
 			continue;
 
-		if (IS_GEN9_LP(dev_priv)) {
+		if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
 			u32 tmp = intel_de_read(dev_priv, MIPI_CTRL(port));
 			tmp &= BXT_PIPE_SELECT_MASK;
 			tmp >>= BXT_PIPE_SELECT_SHIFT;
@@ -1243,7 +1266,7 @@ static void intel_dsi_get_config(struct intel_encoder *encoder,
 
 	pipe_config->output_types |= BIT(INTEL_OUTPUT_DSI);
 
-	if (IS_GEN9_LP(dev_priv)) {
+	if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
 		bxt_dsi_get_pipe_config(encoder, pipe_config);
 		pclk = bxt_dsi_get_pclk(encoder, pipe_config);
 	} else {
@@ -1309,7 +1332,7 @@ static void set_dsi_timings(struct drm_encoder *encoder,
 	hbp = txbyteclkhs(hbp, bpp, lane_count, intel_dsi->burst_mode_ratio);
 
 	for_each_dsi_port(port, intel_dsi->ports) {
-		if (IS_GEN9_LP(dev_priv)) {
+		if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
 			/*
 			 * Program hdisplay and vdisplay on MIPI transcoder.
 			 * This is different from calculated hactive and
@@ -1365,7 +1388,7 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
 	struct drm_encoder *encoder = &intel_encoder->base;
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->uapi.crtc);
+	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
 	struct intel_dsi *intel_dsi = enc_to_intel_dsi(to_intel_encoder(encoder));
 	const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
 	enum port port;
@@ -1373,7 +1396,7 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
 	u32 val, tmp;
 	u16 mode_hdisplay;
 
-	drm_dbg_kms(&dev_priv->drm, "pipe %c\n", pipe_name(intel_crtc->pipe));
+	drm_dbg_kms(&dev_priv->drm, "pipe %c\n", pipe_name(crtc->pipe));
 
 	mode_hdisplay = adjusted_mode->crtc_hdisplay;
 
@@ -1399,8 +1422,8 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
 			tmp &= ~READ_REQUEST_PRIORITY_MASK;
 			intel_de_write(dev_priv, MIPI_CTRL(port),
 				       tmp | READ_REQUEST_PRIORITY_HIGH);
-		} else if (IS_GEN9_LP(dev_priv)) {
-			enum pipe pipe = intel_crtc->pipe;
+		} else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
+			enum pipe pipe = crtc->pipe;
 
 			tmp = intel_de_read(dev_priv, MIPI_CTRL(port));
 			tmp &= ~BXT_PIPE_SELECT_MASK;
@@ -1437,7 +1460,7 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
 	if (intel_dsi->clock_stop)
 		tmp |= CLOCKSTOP;
 
-	if (IS_GEN9_LP(dev_priv)) {
+	if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
 		tmp |= BXT_DPHY_DEFEATURE_EN;
 		if (!is_cmd_mode(intel_dsi))
 			tmp |= BXT_DEFEATURE_DPI_FIFO_CTR;
@@ -1484,7 +1507,8 @@ static void intel_dsi_prepare(struct intel_encoder *intel_encoder,
 		intel_de_write(dev_priv, MIPI_INIT_COUNT(port),
 			       txclkesc(intel_dsi->escape_clk_div, 100));
 
-		if (IS_GEN9_LP(dev_priv) && (!intel_dsi->dual_link)) {
+		if ((IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) &&
+		    !intel_dsi->dual_link) {
 			/*
 			 * BXT spec says write MIPI_INIT_COUNT for
 			 * both the ports, even if only one is
@@ -1562,7 +1586,7 @@ static void intel_dsi_unprepare(struct intel_encoder *encoder)
 		/* Panel commands can be sent when clock is in LP11 */
 		intel_de_write(dev_priv, MIPI_DEVICE_READY(port), 0x0);
 
-		if (IS_GEN9_LP(dev_priv))
+		if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
 			bxt_dsi_reset_clocks(encoder, port);
 		else
 			vlv_dsi_reset_clocks(encoder, port);
@@ -1820,7 +1844,7 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
 	if (!intel_bios_is_dsi_present(dev_priv, &port))
 		return;
 
-	if (IS_GEN9_LP(dev_priv))
+	if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
 		dev_priv->mipi_mmio_base = BXT_MIPI_BASE;
 	else
 		dev_priv->mipi_mmio_base = VLV_MIPI_BASE;
@@ -1846,13 +1870,14 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
 
 	intel_encoder->compute_config = intel_dsi_compute_config;
 	intel_encoder->pre_enable = intel_dsi_pre_enable;
-	if (IS_GEN9_LP(dev_priv))
+	if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
 		intel_encoder->enable = bxt_dsi_enable;
 	intel_encoder->disable = intel_dsi_disable;
 	intel_encoder->post_disable = intel_dsi_post_disable;
 	intel_encoder->get_hw_state = intel_dsi_get_hw_state;
 	intel_encoder->get_config = intel_dsi_get_config;
 	intel_encoder->update_pipe = intel_panel_update_backlight;
+	intel_encoder->shutdown = intel_dsi_shutdown;
 
 	intel_connector->get_hw_state = intel_connector_get_hw_state;
 
@@ -1865,13 +1890,15 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
 	 * On BYT/CHV, pipe A maps to MIPI DSI port A, pipe B maps to MIPI DSI
 	 * port C. BXT isn't limited like this.
 	 */
-	if (IS_GEN9_LP(dev_priv))
+	if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
 		intel_encoder->pipe_mask = ~0;
 	else if (port == PORT_A)
 		intel_encoder->pipe_mask = BIT(PIPE_A);
 	else
 		intel_encoder->pipe_mask = BIT(PIPE_B);
 
+	intel_dsi->panel_power_off_time = ktime_get_boottime();
+
 	if (dev_priv->vbt.dsi.config->dual_link)
 		intel_dsi->ports = BIT(PORT_A) | BIT(PORT_C);
 	else