add the rest of intel_display.c

1 files changed, 8518 insertions, 519 deletions

diff --git a/sys/dev/pci/drm/intel_display.c b/sys/dev/pci/drm/intel_display.c
index bd70762fe5e..0476ea07f9f 100644
--- a/sys/dev/pci/drm/intel_display.c
+++ b/sys/dev/pci/drm/intel_display.c
@@ -1,11 +1,56 @@
+/*
+ * Copyright © 2006-2007 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ */
+
 #include "drmP.h"
 #include "drm.h"
+#include "i915_drm.h"
 #include "i915_drv.h"
 #include "intel_drv.h"
-#include "drm_crtc_helper.h"
 #include "drm_edid.h"
+#include "drm_dp_helper.h"
+#include "drm_crtc_helper.h"
+#include "drm_fourcc.h"
+#include <sys/limits.h>
+
+#define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
+
+bool intel_pipe_has_type(struct drm_crtc *crtc, int type);
+static void intel_update_watermarks(struct drm_device *dev);
+static void intel_increase_pllclock(struct drm_crtc *crtc);
+static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
 
+unsigned int i915_powersave = 1;
 int i915_panel_use_ssc = -1;
+int i915_enable_fbc = 0;
+int i915_enable_rc6 = 0;
+int intel_iommu_enabled = 0;
+
+#define INTEL_RC6_ENABLE		(1<<0)
+#define INTEL_RC6p_ENABLE		(1<<1)
+#define INTEL_RC6pp_ENABLE		(1<<2)
 
 typedef struct {
 	/* given values */
@@ -19,6 +64,393 @@ typedef struct {
 	int	p;
 } intel_clock_t;
 
+typedef struct {
+	int	min, max;
+} intel_range_t;
+
+typedef struct {
+	int	dot_limit;
+	int	p2_slow, p2_fast;
+} intel_p2_t;
+
+#define INTEL_P2_NUM		      2
+typedef struct intel_limit intel_limit_t;
+struct intel_limit {
+	intel_range_t   dot, vco, n, m, m1, m2, p, p1;
+	intel_p2_t	    p2;
+	bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
+			int, int, intel_clock_t *, intel_clock_t *);
+};
+
+/* FDI */
+#define IRONLAKE_FDI_FREQ		2700000 /* in kHz for mode->clock */
+
+static bool
+intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
+		    int target, int refclk, intel_clock_t *match_clock,
+		    intel_clock_t *best_clock);
+static bool
+intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
+			int target, int refclk, intel_clock_t *match_clock,
+			intel_clock_t *best_clock);
+
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *match_clock,
+		      intel_clock_t *best_clock);
+static bool
+intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
+			   int target, int refclk, intel_clock_t *match_clock,
+			   intel_clock_t *best_clock);
+
+static inline u32 /* units of 100MHz */
+intel_fdi_link_freq(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	if (IS_GEN5(dev_priv)) {
+		return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
+	} else
+		return 27;
+}
+
+static const intel_limit_t intel_limits_i8xx_dvo = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 930000, .max = 1400000 },
+	.n = { .min = 3, .max = 16 },
+	.m = { .min = 96, .max = 140 },
+	.m1 = { .min = 18, .max = 26 },
+	.m2 = { .min = 6, .max = 16 },
+	.p = { .min = 4, .max = 128 },
+	.p1 = { .min = 2, .max = 33 },
+	.p2 = { .dot_limit = 165000,
+		.p2_slow = 4, .p2_fast = 2 },
+	.find_pll = intel_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_i8xx_lvds = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 930000, .max = 1400000 },
+	.n = { .min = 3, .max = 16 },
+	.m = { .min = 96, .max = 140 },
+	.m1 = { .min = 18, .max = 26 },
+	.m2 = { .min = 6, .max = 16 },
+	.p = { .min = 4, .max = 128 },
+	.p1 = { .min = 1, .max = 6 },
+	.p2 = { .dot_limit = 165000,
+		.p2_slow = 14, .p2_fast = 7 },
+	.find_pll = intel_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_i9xx_sdvo = {
+	.dot = { .min = 20000, .max = 400000 },
+	.vco = { .min = 1400000, .max = 2800000 },
+	.n = { .min = 1, .max = 6 },
+	.m = { .min = 70, .max = 120 },
+	.m1 = { .min = 10, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 5, .max = 80 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 200000,
+		.p2_slow = 10, .p2_fast = 5 },
+	.find_pll = intel_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_i9xx_lvds = {
+	.dot = { .min = 20000, .max = 400000 },
+	.vco = { .min = 1400000, .max = 2800000 },
+	.n = { .min = 1, .max = 6 },
+	.m = { .min = 70, .max = 120 },
+	.m1 = { .min = 10, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 7, .max = 98 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 112000,
+		.p2_slow = 14, .p2_fast = 7 },
+	.find_pll = intel_find_best_PLL,
+};
+
+
+static const intel_limit_t intel_limits_g4x_sdvo = {
+	.dot = { .min = 25000, .max = 270000 },
+	.vco = { .min = 1750000, .max = 3500000},
+	.n = { .min = 1, .max = 4 },
+	.m = { .min = 104, .max = 138 },
+	.m1 = { .min = 17, .max = 23 },
+	.m2 = { .min = 5, .max = 11 },
+	.p = { .min = 10, .max = 30 },
+	.p1 = { .min = 1, .max = 3},
+	.p2 = { .dot_limit = 270000,
+		.p2_slow = 10,
+		.p2_fast = 10
+	},
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_g4x_hdmi = {
+	.dot = { .min = 22000, .max = 400000 },
+	.vco = { .min = 1750000, .max = 3500000},
+	.n = { .min = 1, .max = 4 },
+	.m = { .min = 104, .max = 138 },
+	.m1 = { .min = 16, .max = 23 },
+	.m2 = { .min = 5, .max = 11 },
+	.p = { .min = 5, .max = 80 },
+	.p1 = { .min = 1, .max = 8},
+	.p2 = { .dot_limit = 165000,
+		.p2_slow = 10, .p2_fast = 5 },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_g4x_single_channel_lvds = {
+	.dot = { .min = 20000, .max = 115000 },
+	.vco = { .min = 1750000, .max = 3500000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 104, .max = 138 },
+	.m1 = { .min = 17, .max = 23 },
+	.m2 = { .min = 5, .max = 11 },
+	.p = { .min = 28, .max = 112 },
+	.p1 = { .min = 2, .max = 8 },
+	.p2 = { .dot_limit = 0,
+		.p2_slow = 14, .p2_fast = 14
+	},
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_g4x_dual_channel_lvds = {
+	.dot = { .min = 80000, .max = 224000 },
+	.vco = { .min = 1750000, .max = 3500000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 104, .max = 138 },
+	.m1 = { .min = 17, .max = 23 },
+	.m2 = { .min = 5, .max = 11 },
+	.p = { .min = 14, .max = 42 },
+	.p1 = { .min = 2, .max = 6 },
+	.p2 = { .dot_limit = 0,
+		.p2_slow = 7, .p2_fast = 7
+	},
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_g4x_display_port = {
+	.dot = { .min = 161670, .max = 227000 },
+	.vco = { .min = 1750000, .max = 3500000},
+	.n = { .min = 1, .max = 2 },
+	.m = { .min = 97, .max = 108 },
+	.m1 = { .min = 0x10, .max = 0x12 },
+	.m2 = { .min = 0x05, .max = 0x06 },
+	.p = { .min = 10, .max = 20 },
+	.p1 = { .min = 1, .max = 2},
+	.p2 = { .dot_limit = 0,
+		.p2_slow = 10, .p2_fast = 10 },
+	.find_pll = intel_find_pll_g4x_dp,
+};
+
+static const intel_limit_t intel_limits_pineview_sdvo = {
+	.dot = { .min = 20000, .max = 400000},
+	.vco = { .min = 1700000, .max = 3500000 },
+	/* Pineview's Ncounter is a ring counter */
+	.n = { .min = 3, .max = 6 },
+	.m = { .min = 2, .max = 256 },
+	/* Pineview only has one combined m divider, which we treat as m2. */
+	.m1 = { .min = 0, .max = 0 },
+	.m2 = { .min = 0, .max = 254 },
+	.p = { .min = 5, .max = 80 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 200000,
+		.p2_slow = 10, .p2_fast = 5 },
+	.find_pll = intel_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_pineview_lvds = {
+	.dot = { .min = 20000, .max = 400000 },
+	.vco = { .min = 1700000, .max = 3500000 },
+	.n = { .min = 3, .max = 6 },
+	.m = { .min = 2, .max = 256 },
+	.m1 = { .min = 0, .max = 0 },
+	.m2 = { .min = 0, .max = 254 },
+	.p = { .min = 7, .max = 112 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 112000,
+		.p2_slow = 14, .p2_fast = 14 },
+	.find_pll = intel_find_best_PLL,
+};
+
+/* Ironlake / Sandybridge
+ *
+ * We calculate clock using (register_value + 2) for N/M1/M2, so here
+ * the range value for them is (actual_value - 2).
+ */
+static const intel_limit_t intel_limits_ironlake_dac = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 5 },
+	.m = { .min = 79, .max = 127 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 5, .max = 80 },
+	.p1 = { .min = 1, .max = 8 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 10, .p2_fast = 5 },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_single_lvds = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 79, .max = 118 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 28, .max = 112 },
+	.p1 = { .min = 2, .max = 8 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 14, .p2_fast = 14 },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_dual_lvds = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 79, .max = 127 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 14, .max = 56 },
+	.p1 = { .min = 2, .max = 8 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 7, .p2_fast = 7 },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+/* LVDS 100mhz refclk limits. */
+static const intel_limit_t intel_limits_ironlake_single_lvds_100m = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 2 },
+	.m = { .min = 79, .max = 126 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 28, .max = 112 },
+	.p1 = { .min = 2, .max = 8 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 14, .p2_fast = 14 },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000 },
+	.n = { .min = 1, .max = 3 },
+	.m = { .min = 79, .max = 126 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 14, .max = 42 },
+	.p1 = { .min = 2, .max = 6 },
+	.p2 = { .dot_limit = 225000,
+		.p2_slow = 7, .p2_fast = 7 },
+	.find_pll = intel_g4x_find_best_PLL,
+};
+
+static const intel_limit_t intel_limits_ironlake_display_port = {
+	.dot = { .min = 25000, .max = 350000 },
+	.vco = { .min = 1760000, .max = 3510000},
+	.n = { .min = 1, .max = 2 },
+	.m = { .min = 81, .max = 90 },
+	.m1 = { .min = 12, .max = 22 },
+	.m2 = { .min = 5, .max = 9 },
+	.p = { .min = 10, .max = 20 },
+	.p1 = { .min = 1, .max = 2},
+	.p2 = { .dot_limit = 0,
+		.p2_slow = 10, .p2_fast = 10 },
+	.find_pll = intel_find_pll_ironlake_dp,
+};
+
+static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc,
+						int refclk)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	const intel_limit_t *limit;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+		if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP) {
+			/* LVDS dual channel */
+			if (refclk == 100000)
+				limit = &intel_limits_ironlake_dual_lvds_100m;
+			else
+				limit = &intel_limits_ironlake_dual_lvds;
+		} else {
+			if (refclk == 100000)
+				limit = &intel_limits_ironlake_single_lvds_100m;
+			else
+				limit = &intel_limits_ironlake_single_lvds;
+		}
+	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+			HAS_eDP)
+		limit = &intel_limits_ironlake_display_port;
+	else
+		limit = &intel_limits_ironlake_dac;
+
+	return limit;
+}
+
+static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	const intel_limit_t *limit;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP)
+			/* LVDS with dual channel */
+			limit = &intel_limits_g4x_dual_channel_lvds;
+		else
+			/* LVDS with dual channel */
+			limit = &intel_limits_g4x_single_channel_lvds;
+	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
+		   intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
+		limit = &intel_limits_g4x_hdmi;
+	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) {
+		limit = &intel_limits_g4x_sdvo;
+	} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+		limit = &intel_limits_g4x_display_port;
+	} else /* The option is for other outputs */
+		limit = &intel_limits_i9xx_sdvo;
+
+	return limit;
+}
+
+static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	const intel_limit_t *limit;
+
+	if (HAS_PCH_SPLIT(dev_priv))
+		limit = intel_ironlake_limit(crtc, refclk);
+	else if (IS_G4X(dev_priv)) {
+		limit = intel_g4x_limit(crtc);
+	} else if (IS_PINEVIEW(dev_priv)) {
+		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+			limit = &intel_limits_pineview_lvds;
+		else
+			limit = &intel_limits_pineview_sdvo;
+	} else if (!IS_GEN2(dev_priv)) {
+		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+			limit = &intel_limits_i9xx_lvds;
+		else
+			limit = &intel_limits_i9xx_sdvo;
+	} else {
+		if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
+			limit = &intel_limits_i8xx_lvds;
+		else
+			limit = &intel_limits_i8xx_dvo;
+	}
+	return limit;
+}
+
 /* m1 is reserved as 0 in Pineview, n is a ring counter */
 static void pineview_clock(int refclk, intel_clock_t *clock)
 {
@@ -43,6 +475,251 @@ static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock
 }
 
 /**
+ * Returns whether any output on the specified pipe is of the specified type
+ */
+bool intel_pipe_has_type(struct drm_crtc *crtc, int type)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_encoder *encoder;
+	struct intel_encoder *intel_encoder;
+
+	TAILQ_FOREACH(encoder, &mode_config->encoder_list, head) {
+		intel_encoder = to_intel_encoder(encoder);
+		if (encoder->crtc == crtc && intel_encoder->type == type)
+			return true;
+	}
+
+	return false;
+}
+
+#define INTELPllInvalid(s)   do { /* DRM_DEBUG(s); */ return false; } while (0)
+/**
+ * Returns whether the given set of divisors are valid for a given refclk with
+ * the given connectors.
+ */
+
+static bool intel_PLL_is_valid(struct drm_device *dev,
+			       const intel_limit_t *limit,
+			       const intel_clock_t *clock)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	if (clock->p1  < limit->p1.min  || limit->p1.max  < clock->p1)
+		INTELPllInvalid("p1 out of range\n");
+	if (clock->p   < limit->p.min   || limit->p.max   < clock->p)
+		INTELPllInvalid("p out of range\n");
+	if (clock->m2  < limit->m2.min  || limit->m2.max  < clock->m2)
+		INTELPllInvalid("m2 out of range\n");
+	if (clock->m1  < limit->m1.min  || limit->m1.max  < clock->m1)
+		INTELPllInvalid("m1 out of range\n");
+	if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev_priv))
+		INTELPllInvalid("m1 <= m2\n");
+	if (clock->m   < limit->m.min   || limit->m.max   < clock->m)
+		INTELPllInvalid("m out of range\n");
+	if (clock->n   < limit->n.min   || limit->n.max   < clock->n)
+		INTELPllInvalid("n out of range\n");
+	if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
+		INTELPllInvalid("vco out of range\n");
+	/* XXX: We may need to be checking "Dot clock" depending on the multiplier,
+	 * connector, etc., rather than just a single range.
+	 */
+	if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
+		INTELPllInvalid("dot out of range\n");
+
+	return true;
+}
+
+static bool
+intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
+		    int target, int refclk, intel_clock_t *match_clock,
+		    intel_clock_t *best_clock)
+
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	intel_clock_t clock;
+	int err = target;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	    (I915_READ(LVDS)) != 0) {
+		/*
+		 * For LVDS, if the panel is on, just rely on its current
+		 * settings for dual-channel.  We haven't figured out how to
+		 * reliably set up different single/dual channel state, if we
+		 * even can.
+		 */
+		if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP)
+			clock.p2 = limit->p2.p2_fast;
+		else
+			clock.p2 = limit->p2.p2_slow;
+	} else {
+		if (target < limit->p2.dot_limit)
+			clock.p2 = limit->p2.p2_slow;
+		else
+			clock.p2 = limit->p2.p2_fast;
+	}
+
+	memset(best_clock, 0, sizeof(*best_clock));
+
+	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
+	     clock.m1++) {
+		for (clock.m2 = limit->m2.min;
+		     clock.m2 <= limit->m2.max; clock.m2++) {
+			/* m1 is always 0 in Pineview */
+			if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev_priv))
+				break;
+			for (clock.n = limit->n.min;
+			     clock.n <= limit->n.max; clock.n++) {
+				for (clock.p1 = limit->p1.min;
+					clock.p1 <= limit->p1.max; clock.p1++) {
+					int this_err;
+
+					intel_clock(dev, refclk, &clock);
+					if (!intel_PLL_is_valid(dev, limit,
+								&clock))
+						continue;
+					if (match_clock &&
+					    clock.p != match_clock->p)
+						continue;
+
+					this_err = abs(clock.dot - target);
+					if (this_err < err) {
+						*best_clock = clock;
+						err = this_err;
+					}
+				}
+			}
+		}
+	}
+
+	return (err != target);
+}
+
+static bool
+intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
+			int target, int refclk, intel_clock_t *match_clock,
+			intel_clock_t *best_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	intel_clock_t clock;
+	int max_n;
+	bool found;
+	/* approximately equals target * 0.00585 */
+	int err_most = (target >> 8) + (target >> 9);
+	found = false;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+		int lvds_reg;
+
+		if (HAS_PCH_SPLIT(dev_priv))
+			lvds_reg = PCH_LVDS;
+		else
+			lvds_reg = LVDS;
+		if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP)
+			clock.p2 = limit->p2.p2_fast;
+		else
+			clock.p2 = limit->p2.p2_slow;
+	} else {
+		if (target < limit->p2.dot_limit)
+			clock.p2 = limit->p2.p2_slow;
+		else
+			clock.p2 = limit->p2.p2_fast;
+	}
+
+	memset(best_clock, 0, sizeof(*best_clock));
+	max_n = limit->n.max;
+	/* based on hardware requirement, prefer smaller n to precision */
+	for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
+		/* based on hardware requirement, prefere larger m1,m2 */
+		for (clock.m1 = limit->m1.max;
+		     clock.m1 >= limit->m1.min; clock.m1--) {
+			for (clock.m2 = limit->m2.max;
+			     clock.m2 >= limit->m2.min; clock.m2--) {
+				for (clock.p1 = limit->p1.max;
+				     clock.p1 >= limit->p1.min; clock.p1--) {
+					int this_err;
+
+					intel_clock(dev, refclk, &clock);
+					if (!intel_PLL_is_valid(dev, limit,
+								&clock))
+						continue;
+					if (match_clock &&
+					    clock.p != match_clock->p)
+						continue;
+
+					this_err = abs(clock.dot - target);
+					if (this_err < err_most) {
+						*best_clock = clock;
+						err_most = this_err;
+						max_n = clock.n;
+						found = true;
+					}
+				}
+			}
+		}
+	}
+	return found;
+}
+
+static bool
+intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+			   int target, int refclk, intel_clock_t *match_clock,
+			   intel_clock_t *best_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	intel_clock_t clock;
+
+	if (target < 200000) {
+		clock.n = 1;
+		clock.p1 = 2;
+		clock.p2 = 10;
+		clock.m1 = 12;
+		clock.m2 = 9;
+	} else {
+		clock.n = 2;
+		clock.p1 = 1;
+		clock.p2 = 10;
+		clock.m1 = 14;
+		clock.m2 = 8;
+	}
+	intel_clock(dev, refclk, &clock);
+	memcpy(best_clock, &clock, sizeof(intel_clock_t));
+	return true;
+}
+
+/* DisplayPort has only two frequencies, 162MHz and 270MHz */
+static bool
+intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
+		      int target, int refclk, intel_clock_t *match_clock,
+		      intel_clock_t *best_clock)
+{
+	intel_clock_t clock;
+	if (target < 200000) {
+		clock.p1 = 2;
+		clock.p2 = 10;
+		clock.n = 2;
+		clock.m1 = 23;
+		clock.m2 = 8;
+	} else {
+		clock.p1 = 1;
+		clock.p2 = 10;
+		clock.n = 1;
+		clock.m1 = 14;
+		clock.m2 = 2;
+	}
+	clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
+	clock.p = (clock.p1 * clock.p2);
+	clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
+	clock.vco = 0;
+	memcpy(best_clock, &clock, sizeof(intel_clock_t));
+	return true;
+}
+
+/**
  * intel_wait_for_vblank - wait for vblank on a given pipe
  * @dev: drm device
  * @pipe: pipe to wait for
@@ -76,6 +753,7 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe)
 	for (retries = 50; retries > 0; retries--) {
 		if (I915_READ(pipestat_reg) & PIPE_VBLANK_INTERRUPT_STATUS)
 			break;
+		DELAY(1);
 	}
 	if (retries == 0)
 		DRM_DEBUG_KMS("vblank wait timed out\n");
@@ -110,6 +788,7 @@ void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
 		for (retries = 100; retries > 0; retries--) {
 			if ((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0)
 				break;
+			DELAY(1000);
 		}
 		if (retries == 0)
 			DRM_DEBUG_KMS("pipe_off wait timed out\n");
@@ -118,10 +797,10 @@ void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
 		int reg = PIPEDSL(pipe);
 
 		/* Wait for the display line to settle */
-		last_line = I915_READ(reg) & DSL_LINEMASK;
 		for (retries = 100; retries > 0; retries--) {
+			last_line = I915_READ(reg) & DSL_LINEMASK;
 			DELAY(5000);
-			if ((I915_READ(reg) & DSL_LINEMASK) != last_line)
+			if ((I915_READ(reg) & DSL_LINEMASK) == last_line)
 				break;
 		}
 		if (retries == 0)
@@ -129,440 +808,2844 @@ void intel_wait_for_pipe_off(struct drm_device *dev, int pipe)
 	}
 }
 
-struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
+static const char *state_string(bool enabled)
 {
-	printf("%s stub\n", __func__);
-	return (NULL);
+	return enabled ? "on" : "off";
 }
 
-void intel_connector_attach_encoder(struct intel_connector *connector,
-				    struct intel_encoder *encoder)
+/* Only for pre-ILK configs */
+static void assert_pll(struct inteldrm_softc *dev_priv,
+		       enum pipe pipe, bool state)
 {
-	connector->encoder = encoder;
-	drm_mode_connector_attach_encoder(&connector->base,
-					  &encoder->base);
+	int reg;
+	u32 val;
+	bool cur_state;
+
+	reg = DPLL(pipe);
+	val = I915_READ(reg);
+	cur_state = !!(val & DPLL_VCO_ENABLE);
+	if (cur_state != state)
+		printf("PLL state assertion failure (expected %s, current %s)\n",
+		    state_string(state), state_string(cur_state));
 }
+#define assert_pll_enabled(d, p) assert_pll(d, p, true)
+#define assert_pll_disabled(d, p) assert_pll(d, p, false)
 
-static int intel_encoder_clones(struct drm_device *dev, int type_mask)
+/* For ILK+ */
+static void assert_pch_pll(struct inteldrm_softc *dev_priv,
+			   enum pipe pipe, bool state)
 {
-	struct drm_encoder *encoder;
-	struct intel_encoder *intel_encoder;
-	int index_mask = 0;
-	int entry = 0;
+	int reg;
+	u32 val;
+	bool cur_state;
 
-	TAILQ_FOREACH(encoder, &dev->mode_config.encoder_list, head) {
-		if (type_mask & intel_encoder->clone_mask)
-			index_mask |= (1 << entry);
-		entry++;
+	if (HAS_PCH_CPT(dev_priv)) {
+		u32 pch_dpll;
+
+		pch_dpll = I915_READ(PCH_DPLL_SEL);
+
+		/* Make sure the selected PLL is enabled to the transcoder */
+		KASSERT(((pch_dpll >> (4 * pipe)) & 8) != 0);
+
+		/* Convert the transcoder pipe number to a pll pipe number */
+		pipe = (pch_dpll >> (4 * pipe)) & 1;
 	}
 
-	return index_mask;
+	reg = PCH_DPLL(pipe);
+	val = I915_READ(reg);
+	cur_state = !!(val & DPLL_VCO_ENABLE);
+	if (cur_state != state)
+		printf("PCH PLL state assertion failure (expected %s, current %s)\n",
+		    state_string(state), state_string(cur_state));
 }
+#define assert_pch_pll_enabled(d, p) assert_pch_pll(d, p, true)
+#define assert_pch_pll_disabled(d, p) assert_pch_pll(d, p, false)
 
-#ifdef notyet
-static bool has_edp_a(struct drm_device *dev)
+static void assert_fdi_tx(struct inteldrm_softc *dev_priv,
+			  enum pipe pipe, bool state)
 {
-	struct inteldrm_softc *dev_priv = dev->dev_private;
+	int reg;
+	u32 val;
+	bool cur_state;
 
-	if (!IS_MOBILE(dev_priv))
+	reg = FDI_TX_CTL(pipe);
+	val = I915_READ(reg);
+	cur_state = !!(val & FDI_TX_ENABLE);
+	if (cur_state != state)
+		printf("FDI TX state assertion failure (expected %s, current %s)\n",
+		    state_string(state), state_string(cur_state));
+}
+#define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
+#define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
+
+static void assert_fdi_rx(struct inteldrm_softc *dev_priv,
+			  enum pipe pipe, bool state)
+{
+	int reg;
+	u32 val;
+	bool cur_state;
+
+	reg = FDI_RX_CTL(pipe);
+	val = I915_READ(reg);
+	cur_state = !!(val & FDI_RX_ENABLE);
+	if (cur_state != state)
+		printf("FDI RX state assertion failure (expected %s, current %s)\n",
+		    state_string(state), state_string(cur_state));
+}
+#define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
+#define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
+
+static void assert_fdi_tx_pll_enabled(struct inteldrm_softc *dev_priv,
+				      enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	/* ILK FDI PLL is always enabled */
+	if (INTEL_INFO(dev_priv)->gen == 5)
+		return;
+
+	reg = FDI_TX_CTL(pipe);
+	val = I915_READ(reg);
+	if (!(val & FDI_TX_PLL_ENABLE))
+		printf("FDI TX PLL assertion failure, should be active but is disabled\n");
+}
+
+static void assert_fdi_rx_pll_enabled(struct inteldrm_softc *dev_priv,
+				      enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	reg = FDI_RX_CTL(pipe);
+	val = I915_READ(reg);
+	if (!(val & FDI_RX_PLL_ENABLE))
+		printf("FDI RX PLL assertion failure, should be active but is disabled\n");
+}
+
+static void assert_panel_unlocked(struct inteldrm_softc *dev_priv,
+				  enum pipe pipe)
+{
+	int pp_reg, lvds_reg;
+	u32 val;
+	enum pipe panel_pipe = PIPE_A;
+	bool locked = true;
+
+	if (HAS_PCH_SPLIT(dev_priv)) {
+		pp_reg = PCH_PP_CONTROL;
+		lvds_reg = PCH_LVDS;
+	} else {
+		pp_reg = PP_CONTROL;
+		lvds_reg = LVDS;
+	}
+
+	val = I915_READ(pp_reg);
+	if (!(val & PANEL_POWER_ON) ||
+	    ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS))
+		locked = false;
+
+	if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT)
+		panel_pipe = PIPE_B;
+
+	if (panel_pipe == pipe && locked)
+		printf("panel assertion failure, pipe %c regs locked\n",
+	     pipe_name(pipe));
+}
+
+void assert_pipe(struct inteldrm_softc *dev_priv,
+		 enum pipe pipe, bool state)
+{
+	int reg;
+	u32 val;
+	bool cur_state;
+
+	/* if we need the pipe A quirk it must be always on */
+	if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
+		state = true;
+
+	reg = PIPECONF(pipe);
+	val = I915_READ(reg);
+	cur_state = !!(val & PIPECONF_ENABLE);
+	if (cur_state != state)
+		printf("pipe %c assertion failure (expected %s, current %s)\n",
+		    pipe_name(pipe), state_string(state), state_string(cur_state));
+}
+
+static void assert_plane(struct inteldrm_softc *dev_priv,
+			 enum plane plane, bool state)
+{
+	int reg;
+	u32 val;
+	bool cur_state;
+
+	reg = DSPCNTR(plane);
+	val = I915_READ(reg);
+	cur_state = !!(val & DISPLAY_PLANE_ENABLE);
+	if (cur_state != state)
+		printf("plane %c assertion failure, (expected %s, current %s)\n",
+		       plane_name(plane), state_string(state), state_string(cur_state));
+}
+
+#define assert_plane_enabled(d, p) assert_plane(d, p, true)
+#define assert_plane_disabled(d, p) assert_plane(d, p, false)
+
+static void assert_planes_disabled(struct inteldrm_softc *dev_priv,
+				   enum pipe pipe)
+{
+	int reg, i;
+	u32 val;
+	int cur_pipe;
+
+	/* Planes are fixed to pipes on ILK+ */
+	if (HAS_PCH_SPLIT(dev_priv)) {
+		reg = DSPCNTR(pipe);
+		val = I915_READ(reg);
+		if ((val & DISPLAY_PLANE_ENABLE) != 0)
+			printf("plane %c assertion failure, should be disabled but not\n",
+			       plane_name(pipe));
+		return;
+	}
+
+	/* Need to check both planes against the pipe */
+	for (i = 0; i < 2; i++) {
+		reg = DSPCNTR(i);
+		val = I915_READ(reg);
+		cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
+			DISPPLANE_SEL_PIPE_SHIFT;
+		if ((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe)
+			printf("plane %c assertion failure, should be off on pipe %c but is still active\n",
+		     plane_name(i), pipe_name(pipe));
+	}
+}
+
+static void assert_pch_refclk_enabled(struct inteldrm_softc *dev_priv)
+{
+	u32 val;
+	bool enabled;
+
+	val = I915_READ(PCH_DREF_CONTROL);
+	enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK |
+			    DREF_SUPERSPREAD_SOURCE_MASK));
+	if (!enabled)
+		printf("PCH refclk assertion failure, should be active but is disabled\n");
+}
+
+static void assert_transcoder_disabled(struct inteldrm_softc *dev_priv,
+				       enum pipe pipe)
+{
+	int reg;
+	u32 val;
+	bool enabled;
+
+	reg = TRANSCONF(pipe);
+	val = I915_READ(reg);
+	enabled = !!(val & TRANS_ENABLE);
+	if (enabled)
+		printf("transcoder assertion failed, should be off on pipe %c but is still active\n",
+	     pipe_name(pipe));
+}
+
+static bool hdmi_pipe_enabled(struct inteldrm_softc *dev_priv,
+			      enum pipe pipe, u32 val)
+{
+	if ((val & PORT_ENABLE) == 0)
 		return false;
 
-	if ((I915_READ(DP_A) & DP_DETECTED) == 0)
+	if (HAS_PCH_CPT(dev_priv)) {
+		if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+			return false;
+	} else {
+		if ((val & TRANSCODER_MASK) != TRANSCODER(pipe))
+			return false;
+	}
+	return true;
+}
+
+static bool lvds_pipe_enabled(struct inteldrm_softc *dev_priv,
+			      enum pipe pipe, u32 val)
+{
+	if ((val & LVDS_PORT_EN) == 0)
 		return false;
 
-	if (IS_GEN5(dev_priv) &&
-	    (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
+	if (HAS_PCH_CPT(dev_priv)) {
+		if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+			return false;
+	} else {
+		if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe))
+			return false;
+	}
+	return true;
+}
+
+static bool adpa_pipe_enabled(struct inteldrm_softc *dev_priv,
+			      enum pipe pipe, u32 val)
+{
+	if ((val & ADPA_DAC_ENABLE) == 0)
+		return false;
+	if (HAS_PCH_CPT(dev_priv)) {
+		if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe))
+			return false;
+	} else {
+		if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe))
+			return false;
+	}
+	return true;
+}
+
+static bool dp_pipe_enabled(struct inteldrm_softc *dev_priv,
+			    enum pipe pipe, u32 port_sel, u32 val)
+{
+	if ((val & DP_PORT_EN) == 0)
 		return false;
 
+	if (HAS_PCH_CPT(dev_priv)) {
+		u32	trans_dp_ctl_reg = TRANS_DP_CTL(pipe);
+		u32	trans_dp_ctl = I915_READ(trans_dp_ctl_reg);
+		if ((trans_dp_ctl & TRANS_DP_PORT_SEL_MASK) != port_sel)
+			return false;
+	} else {
+		if ((val & DP_PIPE_MASK) != (pipe << 30))
+			return false;
+	}
 	return true;
 }
-#endif
 
-static inline bool intel_panel_use_ssc(struct inteldrm_softc *dev_priv)
+static void assert_pch_dp_disabled(struct inteldrm_softc *dev_priv,
+				   enum pipe pipe, int reg, u32 port_sel)
 {
-	if (i915_panel_use_ssc >= 0)
-		return i915_panel_use_ssc != 0;
-	return dev_priv->lvds_use_ssc
-	    && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
+	u32 val = I915_READ(reg);
+	if (dp_pipe_enabled(dev_priv, pipe, port_sel, val))
+		printf("PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
+	     reg, pipe_name(pipe));
 }
 
+static void assert_pch_hdmi_disabled(struct inteldrm_softc *dev_priv,
+				     enum pipe pipe, int reg)
+{
+	u32 val = I915_READ(reg);
+	if (hdmi_pipe_enabled(dev_priv, val, pipe))
+		printf("PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
+	     reg, pipe_name(pipe));
+}
 
-/*
- * Initialize reference clocks when the driver loads
+static void assert_pch_ports_disabled(struct inteldrm_softc *dev_priv,
+				      enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
+	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
+	assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
+
+	reg = PCH_ADPA;
+	val = I915_READ(reg);
+	if (adpa_pipe_enabled(dev_priv, val, pipe))
+		printf("PCH VGA enabled on transcoder %c, should be disabled\n",
+	     pipe_name(pipe));
+
+	reg = PCH_LVDS;
+	val = I915_READ(reg);
+	if (lvds_pipe_enabled(dev_priv, val, pipe))
+		printf("PCH LVDS enabled on transcoder %c, should be disabled\n",
+	     pipe_name(pipe));
+
+	assert_pch_hdmi_disabled(dev_priv, pipe, HDMIB);
+	assert_pch_hdmi_disabled(dev_priv, pipe, HDMIC);
+	assert_pch_hdmi_disabled(dev_priv, pipe, HDMID);
+}
+
+/**
+ * intel_enable_pll - enable a PLL
+ * @dev_priv: i915 private structure
+ * @pipe: pipe PLL to enable
+ *
+ * Enable @pipe's PLL so we can start pumping pixels from a plane.  Check to
+ * make sure the PLL reg is writable first though, since the panel write
+ * protect mechanism may be enabled.
+ *
+ * Note!  This is for pre-ILK only.
  */
-void ironlake_init_pch_refclk(struct drm_device *dev)
+static void intel_enable_pll(struct inteldrm_softc *dev_priv, enum pipe pipe)
 {
-	struct inteldrm_softc *dev_priv = dev->dev_private;
-	struct drm_mode_config *mode_config = &dev->mode_config;
-	struct drm_encoder *encoder;
-	struct intel_encoder *intel_encoder;
-	u32 temp;
-	bool has_lvds = false;
-	bool has_cpu_edp = false;
-	bool has_pch_edp = false;
-	bool has_panel = false;
-	bool has_ck505 = false;
-	bool can_ssc = false;
+	int reg;
+	u32 val;
 
-	/* We need to take the global config into account */
-	TAILQ_FOREACH(encoder, &mode_config->encoder_list, head) {
-		switch (intel_encoder->type) {
-		case INTEL_OUTPUT_LVDS:
-			has_panel = true;
-			has_lvds = true;
+	/* No really, not for ILK+ */
+	KASSERT(INTEL_INFO(dev_priv)->gen < 5);
+
+	/* PLL is protected by panel, make sure we can write it */
+	if (IS_MOBILE(dev_priv) && !IS_I830(dev_priv))
+		assert_panel_unlocked(dev_priv, pipe);
+
+	reg = DPLL(pipe);
+	val = I915_READ(reg);
+	val |= DPLL_VCO_ENABLE;
+
+	/* We do this three times for luck */
+	I915_WRITE(reg, val);
+	POSTING_READ(reg);
+	DELAY(150); /* wait for warmup */
+	I915_WRITE(reg, val);
+	POSTING_READ(reg);
+	DELAY(150); /* wait for warmup */
+	I915_WRITE(reg, val);
+	POSTING_READ(reg);
+	DELAY(150); /* wait for warmup */
+}
+
+/**
+ * intel_disable_pll - disable a PLL
+ * @dev_priv: i915 private structure
+ * @pipe: pipe PLL to disable
+ *
+ * Disable the PLL for @pipe, making sure the pipe is off first.
+ *
+ * Note!  This is for pre-ILK only.
+ */
+static void intel_disable_pll(struct inteldrm_softc *dev_priv, enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	/* Don't disable pipe A or pipe A PLLs if needed */
+	if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+		return;
+
+	/* Make sure the pipe isn't still relying on us */
+	assert_pipe_disabled(dev_priv, pipe);
+
+	reg = DPLL(pipe);
+	val = I915_READ(reg);
+	val &= ~DPLL_VCO_ENABLE;
+	I915_WRITE(reg, val);
+	POSTING_READ(reg);
+}
+
+/**
+ * intel_enable_pch_pll - enable PCH PLL
+ * @dev_priv: i915 private structure
+ * @pipe: pipe PLL to enable
+ *
+ * The PCH PLL needs to be enabled before the PCH transcoder, since it
+ * drives the transcoder clock.
+ */
+static void intel_enable_pch_pll(struct inteldrm_softc *dev_priv,
+				 enum pipe pipe)
+{
+	int reg;
+	u32 val;
+
+	if (pipe > 1)
+		return;
+
+	/* PCH only available on ILK+ */
+	KASSERT(INTEL_INFO(dev_priv)->gen >= 5);
+
+	/* PCH refclock must be enabled first */
+	assert_pch_refclk_enabled(dev_priv);
+
+	reg = PCH_DPLL(pipe);
+	val = I915_READ(reg);
+	val |= DPLL_VCO_ENABLE;
+	I915_WRITE(reg, val);
+	POSTING_READ(reg);
+	DELAY(200);
+}
+
+static void intel_disable_pch_pll(struct inteldrm_softc *dev_priv,
+				  enum pipe pipe)
+{
+	int reg;
+	u32 val, pll_mask = TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL,
+		pll_sel = TRANSC_DPLL_ENABLE;
+
+	if (pipe > 1)
+		return;
+
+	/* PCH only available on ILK+ */
+	KASSERT(INTEL_INFO(dev_priv)->gen >= 5);
+
+	/* Make sure transcoder isn't still depending on us */
+	assert_transcoder_disabled(dev_priv, pipe);
+
+	if (pipe == 0)
+		pll_sel |= TRANSC_DPLLA_SEL;
+	else if (pipe == 1)
+		pll_sel |= TRANSC_DPLLB_SEL;
+
+
+	if ((I915_READ(PCH_DPLL_SEL) & pll_mask) == pll_sel)
+		return;
+
+	reg = PCH_DPLL(pipe);
+	val = I915_READ(reg);
+	val &= ~DPLL_VCO_ENABLE;
+	I915_WRITE(reg, val);
+	POSTING_READ(reg);
+	DELAY(200);
+}
+
+static void intel_enable_transcoder(struct inteldrm_softc *dev_priv,
+				    enum pipe pipe)
+{
+	int reg;
+	u32 val, pipeconf_val;
+	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+	int retries;
+
+	/* PCH only available on ILK+ */
+	KASSERT(INTEL_INFO(dev_priv)->gen >= 5);
+
+	/* Make sure PCH DPLL is enabled */
+	assert_pch_pll_enabled(dev_priv, pipe);
+
+	/* FDI must be feeding us bits for PCH ports */
+	assert_fdi_tx_enabled(dev_priv, pipe);
+	assert_fdi_rx_enabled(dev_priv, pipe);
+
+
+	reg = TRANSCONF(pipe);
+	val = I915_READ(reg);
+	pipeconf_val = I915_READ(PIPECONF(pipe));
+
+	if (HAS_PCH_IBX(dev_priv)) {
+		/*
+		 * make the BPC in transcoder be consistent with
+		 * that in pipeconf reg.
+		 */
+		val &= ~PIPE_BPC_MASK;
+		val |= pipeconf_val & PIPE_BPC_MASK;
+	}
+
+	val &= ~TRANS_INTERLACE_MASK;
+	if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
+		if (HAS_PCH_IBX(dev_priv) &&
+		    intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO))
+			val |= TRANS_LEGACY_INTERLACED_ILK;
+		else
+			val |= TRANS_INTERLACED;
+	else
+		val |= TRANS_PROGRESSIVE;
+
+	I915_WRITE(reg, val | TRANS_ENABLE);
+	for (retries = 100; retries > 0; retries--) {
+		if (I915_READ(reg) & TRANS_STATE_ENABLE)
 			break;
-		case INTEL_OUTPUT_EDP:
-			has_panel = true;
-			if (intel_encoder_is_pch_edp(encoder))
-				has_pch_edp = true;
-			else
-				has_cpu_edp = true;
+		DELAY(1);
+	}
+	if (retries == 0)
+		DRM_ERROR("failed to enable transcoder %d\n", pipe);
+}
+
+static void intel_disable_transcoder(struct inteldrm_softc *dev_priv,
+				     enum pipe pipe)
+{
+	int reg;
+	u32 val;
+	int retries;
+
+	/* FDI relies on the transcoder */
+	assert_fdi_tx_disabled(dev_priv, pipe);
+	assert_fdi_rx_disabled(dev_priv, pipe);
+
+	/* Ports must be off as well */
+	assert_pch_ports_disabled(dev_priv, pipe);
+
+	reg = TRANSCONF(pipe);
+	val = I915_READ(reg);
+	val &= ~TRANS_ENABLE;
+	I915_WRITE(reg, val);
+	/* wait for PCH transcoder off, transcoder state */
+	for (retries = 50; retries > 0; retries--) {
+		if ((I915_READ(reg) & TRANS_STATE_ENABLE) == 0)
 			break;
-		}
+		DELAY(1);
 	}
+	if (retries == 0)
+		DRM_ERROR("failed to disable transcoder %d\n", pipe);
+}
 
-	if (HAS_PCH_IBX(dev_priv)) {
-		has_ck505 = dev_priv->display_clock_mode;
-		can_ssc = has_ck505;
-	} else {
-		has_ck505 = false;
-		can_ssc = true;
+/**
+ * intel_enable_pipe - enable a pipe, asserting requirements
+ * @dev_priv: i915 private structure
+ * @pipe: pipe to enable
+ * @pch_port: on ILK+, is this pipe driving a PCH port or not
+ *
+ * Enable @pipe, making sure that various hardware specific requirements
+ * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc.
+ *
+ * @pipe should be %PIPE_A or %PIPE_B.
+ *
+ * Will wait until the pipe is actually running (i.e. first vblank) before
+ * returning.
+ */
+static void intel_enable_pipe(struct inteldrm_softc *dev_priv, enum pipe pipe,
+			      bool pch_port)
+{
+	int reg;
+	u32 val;
+	struct drm_device *dev = (struct drm_device *)dev_priv->drmdev;
+
+	/*
+	 * A pipe without a PLL won't actually be able to drive bits from
+	 * a plane.  On ILK+ the pipe PLLs are integrated, so we don't
+	 * need the check.
+	 */
+	if (!HAS_PCH_SPLIT(dev_priv))
+		assert_pll_enabled(dev_priv, pipe);
+	else {
+		if (pch_port) {
+			/* if driving the PCH, we need FDI enabled */
+			assert_fdi_rx_pll_enabled(dev_priv, pipe);
+			assert_fdi_tx_pll_enabled(dev_priv, pipe);
+		}
+		/* FIXME: assert CPU port conditions for SNB+ */
 	}
 
-	DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n",
-		      has_panel, has_lvds, has_pch_edp, has_cpu_edp,
-		      has_ck505);
+	reg = PIPECONF(pipe);
+	val = I915_READ(reg);
+	if (val & PIPECONF_ENABLE)
+		return;
 
-	/* Ironlake: try to setup display ref clock before DPLL
-	 * enabling. This is only under driver's control after
-	 * PCH B stepping, previous chipset stepping should be
-	 * ignoring this setting.
+	I915_WRITE(reg, val | PIPECONF_ENABLE);
+	intel_wait_for_vblank(dev, pipe);
+}
+
+/**
+ * intel_disable_pipe - disable a pipe, asserting requirements
+ * @dev_priv: i915 private structure
+ * @pipe: pipe to disable
+ *
+ * Disable @pipe, making sure that various hardware specific requirements
+ * are met, if applicable, e.g. plane disabled, panel fitter off, etc.
+ *
+ * @pipe should be %PIPE_A or %PIPE_B.
+ *
+ * Will wait until the pipe has shut down before returning.
+ */
+static void intel_disable_pipe(struct inteldrm_softc *dev_priv,
+			       enum pipe pipe)
+{
+	int reg;
+	u32 val;
+	struct drm_device *dev = (struct drm_device *)dev_priv->drmdev;
+
+	/*
+	 * Make sure planes won't keep trying to pump pixels to us,
+	 * or we might hang the display.
 	 */
-	temp = I915_READ(PCH_DREF_CONTROL);
-	/* Always enable nonspread source */
-	temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+	assert_planes_disabled(dev_priv, pipe);
 
-	if (has_ck505)
-		temp |= DREF_NONSPREAD_CK505_ENABLE;
-	else
-		temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+	/* Don't disable pipe A or pipe A PLLs if needed */
+	if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+		return;
 
-	if (has_panel) {
-		temp &= ~DREF_SSC_SOURCE_MASK;
-		temp |= DREF_SSC_SOURCE_ENABLE;
+	reg = PIPECONF(pipe);
+	val = I915_READ(reg);
+	if ((val & PIPECONF_ENABLE) == 0)
+		return;
 
-		/* SSC must be turned on before enabling the CPU output  */
-		if (intel_panel_use_ssc(dev_priv) && can_ssc) {
-			DRM_DEBUG_KMS("Using SSC on panel\n");
-			temp |= DREF_SSC1_ENABLE;
-		} else
-			temp &= ~DREF_SSC1_ENABLE;
+	I915_WRITE(reg, val & ~PIPECONF_ENABLE);
+	intel_wait_for_pipe_off(dev, pipe);
+}
 
-		/* Get SSC going before enabling the outputs */
-		I915_WRITE(PCH_DREF_CONTROL, temp);
-		POSTING_READ(PCH_DREF_CONTROL);
-		DELAY(200);
+/*
+ * Plane regs are double buffered, going from enabled->disabled needs a
+ * trigger in order to latch.  The display address reg provides this.
+ */
+static void intel_flush_display_plane(struct inteldrm_softc *dev_priv,
+				      enum plane plane)
+{
+	I915_WRITE(DSPADDR(plane), I915_READ(DSPADDR(plane)));
+	I915_WRITE(DSPSURF(plane), I915_READ(DSPSURF(plane)));
+}
 
-		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+/**
+ * intel_enable_plane - enable a display plane on a given pipe
+ * @dev_priv: i915 private structure
+ * @plane: plane to enable
+ * @pipe: pipe being fed
+ *
+ * Enable @plane on @pipe, making sure that @pipe is running first.
+ */
+static void intel_enable_plane(struct inteldrm_softc *dev_priv,
+			       enum plane plane, enum pipe pipe)
+{
+	int reg;
+	u32 val;
+	struct drm_device *dev = (struct drm_device *)dev_priv->drmdev;
 
-		/* Enable CPU source on CPU attached eDP */
-		if (has_cpu_edp) {
-			if (intel_panel_use_ssc(dev_priv) && can_ssc) {
-				DRM_DEBUG_KMS("Using SSC on eDP\n");
-				temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
-			}
-			else
-				temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
-		} else
-			temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+	/* If the pipe isn't enabled, we can't pump pixels and may hang */
+	assert_pipe_enabled(dev_priv, pipe);
 
-		I915_WRITE(PCH_DREF_CONTROL, temp);
-		POSTING_READ(PCH_DREF_CONTROL);
-		DELAY(200);
-	} else {
-		DRM_DEBUG_KMS("Disabling SSC entirely\n");
+	reg = DSPCNTR(plane);
+	val = I915_READ(reg);
+	if (val & DISPLAY_PLANE_ENABLE)
+		return;
 
-		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+	I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE);
+	intel_flush_display_plane(dev_priv, plane);
+	intel_wait_for_vblank(dev, pipe);
+}
 
-		/* Turn off CPU output */
-		temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+/**
+ * intel_disable_plane - disable a display plane
+ * @dev_priv: i915 private structure
+ * @plane: plane to disable
+ * @pipe: pipe consuming the data
+ *
+ * Disable @plane; should be an independent operation.
+ */
+static void intel_disable_plane(struct inteldrm_softc *dev_priv,
+				enum plane plane, enum pipe pipe)
+{
+	int reg;
+	u32 val;
+	struct drm_device *dev = (struct drm_device *)dev_priv->drmdev;
 
-		I915_WRITE(PCH_DREF_CONTROL, temp);
-		POSTING_READ(PCH_DREF_CONTROL);
-		DELAY(200);
+	reg = DSPCNTR(plane);
+	val = I915_READ(reg);
+	if ((val & DISPLAY_PLANE_ENABLE) == 0)
+		return;
 
-		/* Turn off the SSC source */
-		temp &= ~DREF_SSC_SOURCE_MASK;
-		temp |= DREF_SSC_SOURCE_DISABLE;
+	I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
+	intel_flush_display_plane(dev_priv, plane);
+	intel_wait_for_vblank(dev, pipe);
+}
 
-		/* Turn off SSC1 */
-		temp &= ~ DREF_SSC1_ENABLE;
+static void disable_pch_dp(struct inteldrm_softc *dev_priv,
+			   enum pipe pipe, int reg, u32 port_sel)
+{
+	u32 val = I915_READ(reg);
+	if (dp_pipe_enabled(dev_priv, pipe, port_sel, val)) {
+		DRM_DEBUG_KMS("Disabling pch dp %x on pipe %d\n", reg, pipe);
+		I915_WRITE(reg, val & ~DP_PORT_EN);
+	}
+}
 
-		I915_WRITE(PCH_DREF_CONTROL, temp);
-		POSTING_READ(PCH_DREF_CONTROL);
-		DELAY(200);
+static void disable_pch_hdmi(struct inteldrm_softc *dev_priv,
+			     enum pipe pipe, int reg)
+{
+	u32 val = I915_READ(reg);
+	if (hdmi_pipe_enabled(dev_priv, val, pipe)) {
+		DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n",
+			      reg, pipe);
+		I915_WRITE(reg, val & ~PORT_ENABLE);
 	}
 }
 
-static void intel_setup_outputs(struct drm_device *dev)
+/* Disable any ports connected to this transcoder */
+static void intel_disable_pch_ports(struct inteldrm_softc *dev_priv,
+				    enum pipe pipe)
+{
+	u32 reg, val;
+
+	val = I915_READ(PCH_PP_CONTROL);
+	I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS);
+
+	disable_pch_dp(dev_priv, pipe, PCH_DP_B, TRANS_DP_PORT_SEL_B);
+	disable_pch_dp(dev_priv, pipe, PCH_DP_C, TRANS_DP_PORT_SEL_C);
+	disable_pch_dp(dev_priv, pipe, PCH_DP_D, TRANS_DP_PORT_SEL_D);
+
+	reg = PCH_ADPA;
+	val = I915_READ(reg);
+	if (adpa_pipe_enabled(dev_priv, val, pipe))
+		I915_WRITE(reg, val & ~ADPA_DAC_ENABLE);
+
+	reg = PCH_LVDS;
+	val = I915_READ(reg);
+	if (lvds_pipe_enabled(dev_priv, val, pipe)) {
+		DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val);
+		I915_WRITE(reg, val & ~LVDS_PORT_EN);
+		POSTING_READ(reg);
+		DELAY(100);
+	}
+
+	disable_pch_hdmi(dev_priv, pipe, HDMIB);
+	disable_pch_hdmi(dev_priv, pipe, HDMIC);
+	disable_pch_hdmi(dev_priv, pipe, HDMID);
+}
+
+static void i8xx_disable_fbc(struct drm_device *dev)
 {
 	struct inteldrm_softc *dev_priv = dev->dev_private;
-	struct drm_encoder *encoder;
-	struct intel_encoder *intel_encoder;
-//	bool dpd_is_edp = false;
-	bool has_lvds;
+	u32 fbc_ctl;
+	int retries;
 
-	has_lvds = intel_lvds_init(dev);
-	if (!has_lvds && !HAS_PCH_SPLIT(dev_priv)) {
-		/* disable the panel fitter on everything but LVDS */
-		I915_WRITE(PFIT_CONTROL, 0);
+	/* Disable compression */
+	fbc_ctl = I915_READ(FBC_CONTROL);
+	if ((fbc_ctl & FBC_CTL_EN) == 0)
+		return;
+
+	fbc_ctl &= ~FBC_CTL_EN;
+	I915_WRITE(FBC_CONTROL, fbc_ctl);
+
+	/* Wait for compressing bit to clear */
+	for (retries = 10; retries > 0; retries--) {
+		if ((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0)
+			break;
+		DELAY(1);
+	}
+	if (retries == 0) {
+		DRM_DEBUG_KMS("FBC idle timed out\n");
+		return;
+	}
+
+	DRM_DEBUG_KMS("disabled FBC\n");
+}
+
+static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+{
+	printf("%s stub\n", __func__);
+#if 0
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_framebuffer *fb = crtc->fb;
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_i915_gem_object *obj = intel_fb->obj;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int cfb_pitch;
+	int plane, i;
+	u32 fbc_ctl, fbc_ctl2;
+
+	cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE;
+	if (fb->pitches[0] < cfb_pitch)
+		cfb_pitch = fb->pitches[0];
+
+	/* FBC_CTL wants 64B units */
+	cfb_pitch = (cfb_pitch / 64) - 1;
+	plane = intel_crtc->plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB;
+
+	/* Clear old tags */
+	for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++)
+		I915_WRITE(FBC_TAG + (i * 4), 0);
+
+	/* Set it up... */
+	fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | FBC_CTL_CPU_FENCE;
+	fbc_ctl2 |= plane;
+	I915_WRITE(FBC_CONTROL2, fbc_ctl2);
+	I915_WRITE(FBC_FENCE_OFF, crtc->y);
+
+	/* enable it... */
+	fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
+	if (IS_I945GM(dev_priv))
+		fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */
+	fbc_ctl |= (cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
+	fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
+	fbc_ctl |= obj->fence_reg;
+	I915_WRITE(FBC_CONTROL, fbc_ctl);
+
+	DRM_DEBUG_KMS("enabled FBC, pitch %d, yoff %d, plane %d, ",
+		      cfb_pitch, crtc->y, intel_crtc->plane);
+#endif
+}
+
+static bool i8xx_fbc_enabled(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	return I915_READ(FBC_CONTROL) & FBC_CTL_EN;
+}
+
+static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+{
+	printf("%s stub\n", __func__);
+#if 0
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_framebuffer *fb = crtc->fb;
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_i915_gem_object *obj = intel_fb->obj;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB;
+	unsigned long stall_watermark = 200;
+	u32 dpfc_ctl;
+
+	dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X;
+	dpfc_ctl |= DPFC_CTL_FENCE_EN | obj->fence_reg;
+	I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY);
+
+	I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
+		   (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
+		   (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
+	I915_WRITE(DPFC_FENCE_YOFF, crtc->y);
+
+	/* enable it... */
+	I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN);
+
+	DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
+#endif
+}
+
+static void g4x_disable_fbc(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u32 dpfc_ctl;
+
+	/* Disable compression */
+	dpfc_ctl = I915_READ(DPFC_CONTROL);
+	if (dpfc_ctl & DPFC_CTL_EN) {
+		dpfc_ctl &= ~DPFC_CTL_EN;
+		I915_WRITE(DPFC_CONTROL, dpfc_ctl);
+
+		DRM_DEBUG_KMS("disabled FBC\n");
 	}
+}
+
+static bool g4x_fbc_enabled(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
+}
 
 #ifdef notyet
-	if (HAS_PCH_SPLIT(dev_priv)) {
-		dpd_is_edp = intel_dpd_is_edp(dev);
+static void sandybridge_blit_fbc_update(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u32 blt_ecoskpd;
+
+	/* Make sure blitter notifies FBC of writes */
+	gen6_gt_force_wake_get(dev_priv);
+	blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD);
+	blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY <<
+		GEN6_BLITTER_LOCK_SHIFT;
+	I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
+	blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY;
+	I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
+	blt_ecoskpd &= ~(GEN6_BLITTER_FBC_NOTIFY <<
+			 GEN6_BLITTER_LOCK_SHIFT);
+	I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd);
+	POSTING_READ(GEN6_BLITTER_ECOSKPD);
+	gen6_gt_force_wake_put(dev_priv);
+}
+#endif
 
-		if (has_edp_a(dev))
-			intel_dp_init(dev, DP_A);
+static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+{
+	printf("%s stub\n", __func__);
+#if 0
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_framebuffer *fb = crtc->fb;
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_i915_gem_object *obj = intel_fb->obj;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB;
+	unsigned long stall_watermark = 200;
+	u32 dpfc_ctl;
+
+	dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
+	dpfc_ctl &= DPFC_RESERVED;
+	dpfc_ctl |= (plane | DPFC_CTL_LIMIT_1X);
+	/* Set persistent mode for front-buffer rendering, ala X. */
+	dpfc_ctl |= DPFC_CTL_PERSISTENT_MODE;
+	dpfc_ctl |= (DPFC_CTL_FENCE_EN | obj->fence_reg);
+	I915_WRITE(ILK_DPFC_CHICKEN, DPFC_HT_MODIFY);
+
+	I915_WRITE(ILK_DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
+		   (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
+		   (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
+	I915_WRITE(ILK_DPFC_FENCE_YOFF, crtc->y);
+	I915_WRITE(ILK_FBC_RT_BASE, obj->gtt_offset | ILK_FBC_RT_VALID);
+	/* enable it... */
+	I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN);
 
-		if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
-			intel_dp_init(dev, PCH_DP_D);
+	if (IS_GEN6(dev_priv)) {
+		I915_WRITE(SNB_DPFC_CTL_SA,
+			   SNB_CPU_FENCE_ENABLE | obj->fence_reg);
+		I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y);
+		sandybridge_blit_fbc_update(dev);
 	}
 
-	intel_crt_init(dev);
+	DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane);
+#endif
+}
 
-	if (HAS_PCH_SPLIT(dev_priv)) {
-		int found;
+static void ironlake_disable_fbc(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u32 dpfc_ctl;
 
-		DRM_DEBUG_KMS(
-"HDMIB %d PCH_DP_B %d HDMIC %d HDMID %d PCH_DP_C %d PCH_DP_D %d LVDS %d\n",
-		    (I915_READ(HDMIB) & PORT_DETECTED) != 0,
-		    (I915_READ(PCH_DP_B) & DP_DETECTED) != 0,
-		    (I915_READ(HDMIC) & PORT_DETECTED) != 0,
-		    (I915_READ(HDMID) & PORT_DETECTED) != 0,
-		    (I915_READ(PCH_DP_C) & DP_DETECTED) != 0,
-		    (I915_READ(PCH_DP_D) & DP_DETECTED) != 0,
-		    (I915_READ(PCH_LVDS) & LVDS_DETECTED) != 0);
+	/* Disable compression */
+	dpfc_ctl = I915_READ(ILK_DPFC_CONTROL);
+	if (dpfc_ctl & DPFC_CTL_EN) {
+		dpfc_ctl &= ~DPFC_CTL_EN;
+		I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl);
 
-		if (I915_READ(HDMIB) & PORT_DETECTED) {
-			/* PCH SDVOB multiplex with HDMIB */
-			found = intel_sdvo_init(dev, PCH_SDVOB);
-			if (!found)
-				intel_hdmi_init(dev, HDMIB);
-			if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
-				intel_dp_init(dev, PCH_DP_B);
+		DRM_DEBUG_KMS("disabled FBC\n");
+	}
+}
+
+static bool ironlake_fbc_enabled(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	return I915_READ(ILK_DPFC_CONTROL) & DPFC_CTL_EN;
+}
+
+bool intel_fbc_enabled(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	if (!dev_priv->display.fbc_enabled)
+		return false;
+
+	return dev_priv->display.fbc_enabled(dev);
+}
+
+#ifdef notyet
+static void intel_fbc_work_fn(void *arg, int pending)
+{
+	struct intel_fbc_work *work = arg;
+	struct drm_device *dev = work->crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	DRM_LOCK();
+	if (work == dev_priv->fbc_work) {
+		/* Double check that we haven't switched fb without cancelling
+		 * the prior work.
+		 */
+		if (work->crtc->fb == work->fb) {
+			dev_priv->display.enable_fbc(work->crtc,
+						     work->interval);
+
+			dev_priv->cfb_plane = to_intel_crtc(work->crtc)->plane;
+			dev_priv->cfb_fb = work->crtc->fb->base.id;
+			dev_priv->cfb_y = work->crtc->y;
 		}
 
-		if (I915_READ(HDMIC) & PORT_DETECTED)
-			intel_hdmi_init(dev, HDMIC);
+		dev_priv->fbc_work = NULL;
+	}
+	DRM_UNLOCK();
 
-		if (I915_READ(HDMID) & PORT_DETECTED)
-			intel_hdmi_init(dev, HDMID);
+	free(work, M_DRM);
+}
+#endif
 
-		if (I915_READ(PCH_DP_C) & DP_DETECTED)
-			intel_dp_init(dev, PCH_DP_C);
+static void intel_cancel_fbc_work(struct inteldrm_softc *dev_priv)
+{
+//	u_int pending;
 
-		if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
-			intel_dp_init(dev, PCH_DP_D);
+	if (dev_priv->fbc_work == NULL)
+		return;
 
-	} else if (SUPPORTS_DIGITAL_OUTPUTS(dev_priv)) {
-		bool found = false;
+	DRM_DEBUG_KMS("cancelling pending FBC enable\n");
 
-		if (I915_READ(SDVOB) & SDVO_DETECTED) {
-			DRM_DEBUG_KMS("probing SDVOB\n");
-			found = intel_sdvo_init(dev, SDVOB);
-			if (!found && SUPPORTS_INTEGRATED_HDMI(dev_priv)) {
-				DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
-				intel_hdmi_init(dev, SDVOB);
-			}
+	/* Synchronisation is provided by struct_mutex and checking of
+	 * dev_priv->fbc_work, so we can perform the cancellation
+	 * entirely asynchronously.
+	 */
+#ifdef notyet
+	if (taskqueue_cancel_timeout(dev_priv->tq, &dev_priv->fbc_work->task,
+	    &pending) == 0)
+		/* tasklet was killed before being run, clean up */
+		free(dev_priv->fbc_work, M_DRM);
+#else
+	printf("%s todo cancel timeouts\n", __func__);
+#endif
 
-			if (!found && SUPPORTS_INTEGRATED_DP(dev_priv)) {
-				DRM_DEBUG_KMS("probing DP_B\n");
-				intel_dp_init(dev, DP_B);
+	/* Mark the work as no longer wanted so that if it does
+	 * wake-up (because the work was already running and waiting
+	 * for our mutex), it will discover that is no longer
+	 * necessary to run.
+	 */
+	dev_priv->fbc_work = NULL;
+}
+
+static void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+{
+	struct intel_fbc_work *work;
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	if (!dev_priv->display.enable_fbc)
+		return;
+
+	intel_cancel_fbc_work(dev_priv);
+
+	work = malloc(sizeof(*work), M_DRM, M_WAITOK | M_ZERO);
+	work->crtc = crtc;
+	work->fb = crtc->fb;
+	work->interval = interval;
+#ifdef notyet
+	TIMEOUT_TASK_INIT(dev_priv->tq, &work->task, 0, intel_fbc_work_fn,
+	    work);
+#else
+	printf("%s todo init task\n", __func__);
+#endif
+
+	dev_priv->fbc_work = work;
+
+	DRM_DEBUG_KMS("scheduling delayed FBC enable\n");
+
+	/* Delay the actual enabling to let pageflipping cease and the
+	 * display to settle before starting the compression. Note that
+	 * this delay also serves a second purpose: it allows for a
+	 * vblank to pass after disabling the FBC before we attempt
+	 * to modify the control registers.
+	 *
+	 * A more complicated solution would involve tracking vblanks
+	 * following the termination of the page-flipping sequence
+	 * and indeed performing the enable as a co-routine and not
+	 * waiting synchronously upon the vblank.
+	 */
+#ifdef notyet
+	taskqueue_enqueue_timeout(dev_priv->tq, &work->task,
+	    msecs_to_jiffies(50));
+#else
+	printf("%s todo enqueue task\n", __func__);
+#endif
+}
+
+void intel_disable_fbc(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	intel_cancel_fbc_work(dev_priv);
+
+	if (!dev_priv->display.disable_fbc)
+		return;
+
+	dev_priv->display.disable_fbc(dev);
+	dev_priv->cfb_plane = -1;
+}
+
+/**
+ * intel_update_fbc - enable/disable FBC as needed
+ * @dev: the drm_device
+ *
+ * Set up the framebuffer compression hardware at mode set time.  We
+ * enable it if possible:
+ *   - plane A only (on pre-965)
+ *   - no pixel mulitply/line duplication
+ *   - no alpha buffer discard
+ *   - no dual wide
+ *   - framebuffer <= 2048 in width, 1536 in height
+ *
+ * We can't assume that any compression will take place (worst case),
+ * so the compressed buffer has to be the same size as the uncompressed
+ * one.  It also must reside (along with the line length buffer) in
+ * stolen memory.
+ *
+ * We need to enable/disable FBC on a global basis.
+ */
+static void intel_update_fbc(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = NULL, *tmp_crtc;
+	struct intel_crtc *intel_crtc;
+	struct drm_framebuffer *fb;
+	struct intel_framebuffer *intel_fb;
+	struct drm_i915_gem_object *obj;
+	int enable_fbc;
+
+	DRM_DEBUG_KMS("\n");
+
+	if (!i915_powersave)
+		return;
+
+	if (!I915_HAS_FBC(dev_priv))
+		return;
+
+	/*
+	 * If FBC is already on, we just have to verify that we can
+	 * keep it that way...
+	 * Need to disable if:
+	 *   - more than one pipe is active
+	 *   - changing FBC params (stride, fence, mode)
+	 *   - new fb is too large to fit in compressed buffer
+	 *   - going to an unsupported config (interlace, pixel multiply, etc.)
+	 */
+	TAILQ_FOREACH(tmp_crtc, &dev->mode_config.crtc_list, head) {
+		if (tmp_crtc->enabled && tmp_crtc->fb) {
+			if (crtc) {
+				DRM_DEBUG_KMS("more than one pipe active, disabling compression\n");
+				dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES;
+				goto out_disable;
 			}
+			crtc = tmp_crtc;
 		}
+	}
 
-		/* Before G4X SDVOC doesn't have its own detect register */
+	if (!crtc || crtc->fb == NULL) {
+		DRM_DEBUG_KMS("no output, disabling\n");
+		dev_priv->no_fbc_reason = FBC_NO_OUTPUT;
+		goto out_disable;
+	}
 
-		if (I915_READ(SDVOB) & SDVO_DETECTED) {
-			DRM_DEBUG_KMS("probing SDVOC\n");
-			found = intel_sdvo_init(dev, SDVOC);
-		}
+	intel_crtc = to_intel_crtc(crtc);
+	fb = crtc->fb;
+	intel_fb = to_intel_framebuffer(fb);
+	obj = intel_fb->obj;
+
+	enable_fbc = i915_enable_fbc;
+	if (enable_fbc < 0) {
+		DRM_DEBUG_KMS("fbc set to per-chip default\n");
+		enable_fbc = 1;
+		if (INTEL_INFO(dev_priv)->gen <= 6)
+			enable_fbc = 0;
+	}
+	if (!enable_fbc) {
+		DRM_DEBUG_KMS("fbc disabled per module param\n");
+		dev_priv->no_fbc_reason = FBC_MODULE_PARAM;
+		goto out_disable;
+	}
+#ifdef notyet
+	if (intel_fb->obj->base.size > dev_priv->cfb_size) {
+		DRM_DEBUG_KMS("framebuffer too large, disabling "
+			      "compression\n");
+		dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL;
+		goto out_disable;
+	}
+#else
+	printf("%s todo fb size check\n", __func__);
+#endif
+	if ((crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) ||
+	    (crtc->mode.flags & DRM_MODE_FLAG_DBLSCAN)) {
+		DRM_DEBUG_KMS("mode incompatible with compression, "
+			      "disabling\n");
+		dev_priv->no_fbc_reason = FBC_UNSUPPORTED_MODE;
+		goto out_disable;
+	}
+	if ((crtc->mode.hdisplay > 2048) ||
+	    (crtc->mode.vdisplay > 1536)) {
+		DRM_DEBUG_KMS("mode too large for compression, disabling\n");
+		dev_priv->no_fbc_reason = FBC_MODE_TOO_LARGE;
+		goto out_disable;
+	}
+	if ((IS_I915GM(dev_priv) || IS_I945GM(dev_priv)) && intel_crtc->plane != 0) {
+		DRM_DEBUG_KMS("plane not 0, disabling compression\n");
+		dev_priv->no_fbc_reason = FBC_BAD_PLANE;
+		goto out_disable;
+	}
+#ifdef notyet
+	if (obj->tiling_mode != I915_TILING_X ||
+	    obj->fence_reg == I915_FENCE_REG_NONE) {
+		DRM_DEBUG_KMS("framebuffer not tiled or fenced, disabling compression\n");
+		dev_priv->no_fbc_reason = FBC_NOT_TILED;
+		goto out_disable;
+	}
+#else
+	printf("%s todo fb tile/fence check\n", __func__);
+#endif
 
-		if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
+	/* If the scanout has not changed, don't modify the FBC settings.
+	 * Note that we make the fundamental assumption that the fb->obj
+	 * cannot be unpinned (and have its GTT offset and fence revoked)
+	 * without first being decoupled from the scanout and FBC disabled.
+	 */
+	if (dev_priv->cfb_plane == intel_crtc->plane &&
+	    dev_priv->cfb_fb == fb->base.id &&
+	    dev_priv->cfb_y == crtc->y)
+		return;
 
-			if (SUPPORTS_INTEGRATED_HDMI(dev_priv)) {
-				DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
-				intel_hdmi_init(dev, SDVOC);
-			}
-			if (SUPPORTS_INTEGRATED_DP(dev_priv)) {
-				DRM_DEBUG_KMS("probing DP_C\n");
-				intel_dp_init(dev, DP_C);
-			}
+	if (intel_fbc_enabled(dev)) {
+		/* We update FBC along two paths, after changing fb/crtc
+		 * configuration (modeswitching) and after page-flipping
+		 * finishes. For the latter, we know that not only did
+		 * we disable the FBC at the start of the page-flip
+		 * sequence, but also more than one vblank has passed.
+		 *
+		 * For the former case of modeswitching, it is possible
+		 * to switch between two FBC valid configurations
+		 * instantaneously so we do need to disable the FBC
+		 * before we can modify its control registers. We also
+		 * have to wait for the next vblank for that to take
+		 * effect. However, since we delay enabling FBC we can
+		 * assume that a vblank has passed since disabling and
+		 * that we can safely alter the registers in the deferred
+		 * callback.
+		 *
+		 * In the scenario that we go from a valid to invalid
+		 * and then back to valid FBC configuration we have
+		 * no strict enforcement that a vblank occurred since
+		 * disabling the FBC. However, along all current pipe
+		 * disabling paths we do need to wait for a vblank at
+		 * some point. And we wait before enabling FBC anyway.
+		 */
+		DRM_DEBUG_KMS("disabling active FBC for update\n");
+		intel_disable_fbc(dev);
+	}
+
+	intel_enable_fbc(crtc, 500);
+	return;
+
+out_disable:
+	/* Multiple disables should be harmless */
+	if (intel_fbc_enabled(dev)) {
+		DRM_DEBUG_KMS("unsupported config, disabling FBC\n");
+		intel_disable_fbc(dev);
+	}
+}
+
+#ifdef notyet
+int
+intel_pin_and_fence_fb_obj(struct drm_device *dev,
+			   struct drm_i915_gem_object *obj,
+			   struct intel_ring_buffer *pipelined)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u32 alignment;
+	int ret;
+
+	alignment = 0; /* shut gcc */
+	switch (obj->tiling_mode) {
+	case I915_TILING_NONE:
+		if (IS_BROADWATER(dev_priv) || IS_CRESTLINE(dev_priv))
+			alignment = 128 * 1024;
+		else if (INTEL_INFO(dev_priv)->gen >= 4)
+			alignment = 4 * 1024;
+		else
+			alignment = 64 * 1024;
+		break;
+	case I915_TILING_X:
+		/* pin() will align the object as required by fence */
+		alignment = 0;
+		break;
+	case I915_TILING_Y:
+		/* FIXME: Is this true? */
+		DRM_ERROR("Y tiled not allowed for scan out buffers\n");
+		return -EINVAL;
+	default:
+		KASSERT(0, ("Wrong tiling for fb obj"));
+	}
+
+	dev_priv->mm.interruptible = false;
+	ret = i915_gem_object_pin_to_display_plane(obj, alignment, pipelined);
+	if (ret)
+		goto err_interruptible;
+
+	/* Install a fence for tiled scan-out. Pre-i965 always needs a
+	 * fence, whereas 965+ only requires a fence if using
+	 * framebuffer compression.  For simplicity, we always install
+	 * a fence as the cost is not that onerous.
+	 */
+	if (obj->tiling_mode != I915_TILING_NONE) {
+		ret = i915_gem_object_get_fence(obj, pipelined);
+		if (ret)
+			goto err_unpin;
+
+		i915_gem_object_pin_fence(obj);
+	}
+
+	dev_priv->mm.interruptible = true;
+	return 0;
+
+err_unpin:
+	i915_gem_object_unpin(obj);
+err_interruptible:
+	dev_priv->mm.interruptible = true;
+	return ret;
+}
+
+void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
+{
+	i915_gem_object_unpin_fence(obj);
+	i915_gem_object_unpin(obj);
+}
+#endif
+
+static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
+			     int x, int y)
+{
+	printf("%s stub\n", __func__);
+	return EINVAL;
+#ifdef notyet
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_framebuffer *intel_fb;
+	struct drm_i915_gem_object *obj;
+	int plane = intel_crtc->plane;
+	unsigned long Start, Offset;
+	u32 dspcntr;
+	u32 reg;
+
+	switch (plane) {
+	case 0:
+	case 1:
+		break;
+	default:
+		DRM_ERROR("Can't update plane %d in SAREA\n", plane);
+		return -EINVAL;
+	}
+
+	intel_fb = to_intel_framebuffer(fb);
+	obj = intel_fb->obj;
+
+	reg = DSPCNTR(plane);
+	dspcntr = I915_READ(reg);
+	/* Mask out pixel format bits in case we change it */
+	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+	switch (fb->bits_per_pixel) {
+	case 8:
+		dspcntr |= DISPPLANE_8BPP;
+		break;
+	case 16:
+		if (fb->depth == 15)
+			dspcntr |= DISPPLANE_15_16BPP;
+		else
+			dspcntr |= DISPPLANE_16BPP;
+		break;
+	case 24:
+	case 32:
+		dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+		break;
+	default:
+		DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
+		return -EINVAL;
+	}
+	if (INTEL_INFO(dev_priv)->gen >= 4) {
+		if (obj->tiling_mode != I915_TILING_NONE)
+			dspcntr |= DISPPLANE_TILED;
+		else
+			dspcntr &= ~DISPPLANE_TILED;
+	}
+
+	I915_WRITE(reg, dspcntr);
+
+	Start = obj->gtt_offset;
+	Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
+
+	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
+		      Start, Offset, x, y, fb->pitches[0]);
+	I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
+	if (INTEL_INFO(dev_priv)->gen >= 4) {
+		I915_WRITE(DSPSURF(plane), Start);
+		I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
+		I915_WRITE(DSPADDR(plane), Offset);
+	} else
+		I915_WRITE(DSPADDR(plane), Start + Offset);
+	POSTING_READ(reg);
+
+	return (0);
+#endif
+}
+
+static int ironlake_update_plane(struct drm_crtc *crtc,
+				 struct drm_framebuffer *fb, int x, int y)
+{
+	printf("%s stub\n", __func__);
+	return EINVAL;
+#ifdef notyet
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_framebuffer *intel_fb;
+	struct drm_i915_gem_object *obj;
+	int plane = intel_crtc->plane;
+	unsigned long Start, Offset;
+	u32 dspcntr;
+	u32 reg;
+
+	switch (plane) {
+	case 0:
+	case 1:
+	case 2:
+		break;
+	default:
+		DRM_ERROR("Can't update plane %d in SAREA\n", plane);
+		return -EINVAL;
+	}
+
+	intel_fb = to_intel_framebuffer(fb);
+	obj = intel_fb->obj;
+
+	reg = DSPCNTR(plane);
+	dspcntr = I915_READ(reg);
+	/* Mask out pixel format bits in case we change it */
+	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+	switch (fb->bits_per_pixel) {
+	case 8:
+		dspcntr |= DISPPLANE_8BPP;
+		break;
+	case 16:
+		if (fb->depth != 16) {
+			DRM_ERROR("bpp 16, depth %d\n", fb->depth);
+			return -EINVAL;
 		}
 
-		if (SUPPORTS_INTEGRATED_DP(dev_priv) &&
-		    (I915_READ(DP_D) & DP_DETECTED)) {
-			DRM_DEBUG_KMS("probing DP_D\n");
-			intel_dp_init(dev, DP_D);
+		dspcntr |= DISPPLANE_16BPP;
+		break;
+	case 24:
+	case 32:
+		if (fb->depth == 24)
+			dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+		else if (fb->depth == 30)
+			dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA;
+		else {
+			DRM_ERROR("bpp %d depth %d\n", fb->bits_per_pixel,
+			    fb->depth);
+			return -EINVAL;
 		}
-	} else if (IS_GEN2(dev_priv)) {
-		intel_dvo_init(dev);
+		break;
+	default:
+		DRM_ERROR("Unknown color depth %d\n", fb->bits_per_pixel);
+		return -EINVAL;
 	}
 
-	if (SUPPORTS_TV(dev_priv))
-		intel_tv_init(dev);
-#endif // notyet
+	if (obj->tiling_mode != I915_TILING_NONE)
+		dspcntr |= DISPPLANE_TILED;
+	else
+		dspcntr &= ~DISPPLANE_TILED;
 
-	TAILQ_FOREACH(encoder, &dev->mode_config.encoder_list, head) {
-	
-		intel_encoder = to_intel_encoder(encoder);
-		encoder->possible_crtcs = intel_encoder->crtc_mask;
-		encoder->possible_clones =
-			intel_encoder_clones(dev, intel_encoder->clone_mask);
-	}
+	/* must disable */
+	dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
 
-	/* disable all the possible outputs/crtcs before entering KMS mode */
-	drm_helper_disable_unused_functions(dev);
+	I915_WRITE(reg, dspcntr);
 
-	if (HAS_PCH_SPLIT(dev_priv))
-		ironlake_init_pch_refclk(dev);
+	Start = obj->gtt_offset;
+	Offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
+
+	DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
+		      Start, Offset, x, y, fb->pitches[0]);
+	I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
+	I915_WRITE(DSPSURF(plane), Start);
+	I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
+	I915_WRITE(DSPADDR(plane), Offset);
+	POSTING_READ(reg);
+
+	return 0;
+#endif
 }
 
-static struct drm_framebuffer *
-intel_user_framebuffer_create(struct drm_device *dev,
-    struct drm_file *filp, struct drm_mode_fb_cmd *mode_cmd)
+/* Assume fb object is pinned & idle & fenced and just update base pointers */
+static int
+intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
+			   int x, int y, enum mode_set_atomic state)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	int ret;
+
+	ret = dev_priv->display.update_plane(crtc, fb, x, y);
+	if (ret)
+		return ret;
+
+	intel_update_fbc(dev);
+	intel_increase_pllclock(crtc);
+
+	return 0;
+}
+
+static int
+intel_finish_fb(struct drm_framebuffer *old_fb)
 {
 	printf("%s stub\n", __func__);
-	return (NULL);
+	return EINVAL;
+#ifdef notyet
+	struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj;
+	struct drm_device *dev = obj->base.dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	bool was_interruptible = dev_priv->mm.interruptible;
+	int ret;
+
+	mtx_lock(&dev->event_lock);
+	while (!atomic_read(&dev_priv->mm.wedged) &&
+	    atomic_read(&obj->pending_flip) != 0) {
+		msleep(&obj->pending_flip, &dev->event_lock,
+		    0, "915flp", 0);
+	}
+	mtx_unlock(&dev->event_lock);	   
+
+	/* Big Hammer, we also need to ensure that any pending
+	 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
+	 * current scanout is retired before unpinning the old
+	 * framebuffer.
+	 *
+	 * This should only fail upon a hung GPU, in which case we
+	 * can safely continue.
+	 */
+	dev_priv->mm.interruptible = false;
+	ret = i915_gem_object_finish_gpu(obj);
+	dev_priv->mm.interruptible = was_interruptible;
+	return ret;
+#endif
 }
 
+static int
+intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
+		    struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+#if 0
+	struct drm_i915_master_private *master_priv;
+#else
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+#endif
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int ret;
+
+	/* no fb bound */
+	if (!crtc->fb) {
+		DRM_ERROR("No FB bound\n");
+		return 0;
+	}
 
-static const struct drm_mode_config_funcs intel_mode_funcs = {
-	.fb_create = intel_user_framebuffer_create,
-//	.output_poll_changed = intel_fb_output_poll_changed,
+	switch (intel_crtc->plane) {
+	case 0:
+	case 1:
+		break;
+	case 2:
+		if (IS_IVYBRIDGE(dev_priv))
+			break;
+		/* fall through otherwise */
+	default:
+		DRM_ERROR("no plane for crtc\n");
+		return -EINVAL;
+	}
+
+	DRM_LOCK();
+#ifdef notyet
+	ret = intel_pin_and_fence_fb_obj(dev,
+					 to_intel_framebuffer(crtc->fb)->obj,
+					 NULL);
+#else
+	printf("%s todo pin and fence fb\n", __func__);
+#endif
+	if (ret != 0) {
+		DRM_UNLOCK();
+		DRM_ERROR("pin & fence failed\n");
+		return ret;
+	}
+
+	if (old_fb)
+		intel_finish_fb(old_fb);
+
+	ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
+					 LEAVE_ATOMIC_MODE_SET);
+	if (ret) {
+#ifdef notyet
+		intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
+#else
+		printf("%s todo unpin fb\n", __func__);
+#endif
+		DRM_UNLOCK();
+		DRM_ERROR("failed to update base address\n");
+		return ret;
+	}
+
+	if (old_fb) {
+		intel_wait_for_vblank(dev, intel_crtc->pipe);
+#ifdef notyet
+		intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
+#else
+		printf("%s todo unpin fb after vblank\n", __func__);
+#endif
+	}
+
+	DRM_UNLOCK();
+
+#if 0
+	if (!dev->primary->master)
+		return 0;
+
+	master_priv = dev->primary->master->driver_priv;
+	if (!master_priv->sarea_priv)
+		return 0;
+
+	if (intel_crtc->pipe) {
+		master_priv->sarea_priv->pipeB_x = x;
+		master_priv->sarea_priv->pipeB_y = y;
+	} else {
+		master_priv->sarea_priv->pipeA_x = x;
+		master_priv->sarea_priv->pipeA_y = y;
+	}
+#else
+
+	if (!dev_priv->sarea_priv)
+		return 0;
+
+	if (intel_crtc->pipe) {
+		dev_priv->sarea_priv->planeB_x = x;
+		dev_priv->sarea_priv->planeB_y = y;
+	} else {
+		dev_priv->sarea_priv->planeA_x = x;
+		dev_priv->sarea_priv->planeA_y = y;
+	}
+#endif
+
+	return 0;
+}
+
+static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u32 dpa_ctl;
+
+	DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
+	dpa_ctl = I915_READ(DP_A);
+	dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+	if (clock < 200000) {
+		u32 temp;
+		dpa_ctl |= DP_PLL_FREQ_160MHZ;
+		/* workaround for 160Mhz:
+		   1) program 0x4600c bits 15:0 = 0x8124
+		   2) program 0x46010 bit 0 = 1
+		   3) program 0x46034 bit 24 = 1
+		   4) program 0x64000 bit 14 = 1
+		   */
+		temp = I915_READ(0x4600c);
+		temp &= 0xffff0000;
+		I915_WRITE(0x4600c, temp | 0x8124);
+
+		temp = I915_READ(0x46010);
+		I915_WRITE(0x46010, temp | 1);
+
+		temp = I915_READ(0x46034);
+		I915_WRITE(0x46034, temp | (1 << 24));
+	} else {
+		dpa_ctl |= DP_PLL_FREQ_270MHZ;
+	}
+	I915_WRITE(DP_A, dpa_ctl);
+
+	POSTING_READ(DP_A);
+	DELAY(500);
+}
+
+static void intel_fdi_normal_train(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp;
+
+	/* enable normal train */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (IS_IVYBRIDGE(dev_priv)) {
+		temp &= ~FDI_LINK_TRAIN_NONE_IVB;
+		temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
+	}
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev_priv)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_NORMAL_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_NONE;
+	}
+	I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
+
+	/* wait one idle pattern time */
+	POSTING_READ(reg);
+	DELAY(1000);
+
+	/* IVB wants error correction enabled */
+	if (IS_IVYBRIDGE(dev_priv))
+		I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
+			   FDI_FE_ERRC_ENABLE);
+}
+
+static void cpt_phase_pointer_enable(struct drm_device *dev, int pipe)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u32 flags = I915_READ(SOUTH_CHICKEN1);
+
+	flags |= FDI_PHASE_SYNC_OVR(pipe);
+	I915_WRITE(SOUTH_CHICKEN1, flags); /* once to unlock... */
+	flags |= FDI_PHASE_SYNC_EN(pipe);
+	I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to enable */
+	POSTING_READ(SOUTH_CHICKEN1);
+}
+
+/* The FDI link training functions for ILK/Ibexpeak. */
+static void ironlake_fdi_link_train(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	u32 reg, temp, tries;
+
+	/* FDI needs bits from pipe & plane first */
+	assert_pipe_enabled(dev_priv, pipe);
+	assert_plane_enabled(dev_priv, plane);
+
+	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+	   for train result */
+	reg = FDI_RX_IMR(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_RX_SYMBOL_LOCK;
+	temp &= ~FDI_RX_BIT_LOCK;
+	I915_WRITE(reg, temp);
+	I915_READ(reg);
+	DELAY(150);
+
+	/* enable CPU FDI TX and PCH FDI RX */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~(7 << 19);
+	temp |= (intel_crtc->fdi_lanes - 1) << 19;
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_1;
+	I915_WRITE(reg, temp | FDI_TX_ENABLE);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_1;
+	I915_WRITE(reg, temp | FDI_RX_ENABLE);
+
+	POSTING_READ(reg);
+	DELAY(150);
+
+	/* Ironlake workaround, enable clock pointer after FDI enable*/
+	if (HAS_PCH_IBX(dev_priv)) {
+		I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
+		I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
+			   FDI_RX_PHASE_SYNC_POINTER_EN);
+	}
+
+	reg = FDI_RX_IIR(pipe);
+	for (tries = 0; tries < 5; tries++) {
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if ((temp & FDI_RX_BIT_LOCK)) {
+			DRM_DEBUG_KMS("FDI train 1 done.\n");
+			I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+			break;
+		}
+	}
+	if (tries == 5)
+		DRM_ERROR("FDI train 1 fail!\n");
+
+	/* Train 2 */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_2;
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_2;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	DELAY(150);
+
+	reg = FDI_RX_IIR(pipe);
+	for (tries = 0; tries < 5; tries++) {
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if (temp & FDI_RX_SYMBOL_LOCK) {
+			I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+			DRM_DEBUG_KMS("FDI train 2 done.\n");
+			break;
+		}
+	}
+	if (tries == 5)
+		DRM_ERROR("FDI train 2 fail!\n");
+
+	DRM_DEBUG_KMS("FDI train done\n");
+
+}
+
+static const int snb_b_fdi_train_param[] = {
+	FDI_LINK_TRAIN_400MV_0DB_SNB_B,
+	FDI_LINK_TRAIN_400MV_6DB_SNB_B,
+	FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
+	FDI_LINK_TRAIN_800MV_0DB_SNB_B,
 };
 
-static void intel_init_quirks(struct drm_device *dev)
+/* The FDI link training functions for SNB/Cougarpoint. */
+static void gen6_fdi_link_train(struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp, i;
+
+	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+	   for train result */
+	reg = FDI_RX_IMR(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_RX_SYMBOL_LOCK;
+	temp &= ~FDI_RX_BIT_LOCK;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	DELAY(150);
+
+	/* enable CPU FDI TX and PCH FDI RX */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~(7 << 19);
+	temp |= (intel_crtc->fdi_lanes - 1) << 19;
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_1;
+	temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+	/* SNB-B */
+	temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+	I915_WRITE(reg, temp | FDI_TX_ENABLE);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev_priv)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+	}
+	I915_WRITE(reg, temp | FDI_RX_ENABLE);
+
+	POSTING_READ(reg);
+	DELAY(150);
+
+	if (HAS_PCH_CPT(dev_priv))
+		cpt_phase_pointer_enable(dev, pipe);
+
+	for (i = 0; i < 4; i++) {
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		temp |= snb_b_fdi_train_param[i];
+		I915_WRITE(reg, temp);
+
+		POSTING_READ(reg);
+		DELAY(500);
+
+		reg = FDI_RX_IIR(pipe);
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if (temp & FDI_RX_BIT_LOCK) {
+			I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+			DRM_DEBUG_KMS("FDI train 1 done.\n");
+			break;
+		}
+	}
+	if (i == 4)
+		DRM_ERROR("FDI train 1 fail!\n");
+
+	/* Train 2 */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_2;
+	if (IS_GEN6(dev_priv)) {
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		/* SNB-B */
+		temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+	}
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev_priv)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_2;
+	}
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	DELAY(150);
+
+	for (i = 0; i < 4; i++) {
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		temp |= snb_b_fdi_train_param[i];
+		I915_WRITE(reg, temp);
+
+		POSTING_READ(reg);
+		DELAY(500);
+
+		reg = FDI_RX_IIR(pipe);
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if (temp & FDI_RX_SYMBOL_LOCK) {
+			I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+			DRM_DEBUG_KMS("FDI train 2 done.\n");
+			break;
+		}
+	}
+	if (i == 4)
+		DRM_ERROR("FDI train 2 fail!\n");
+
+	DRM_DEBUG_KMS("FDI train done.\n");
 }
 
-void intel_init_clock_gating(struct drm_device *dev)
+/* Manual link training for Ivy Bridge A0 parts */
+static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp, i;
+
+	/* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+	   for train result */
+	reg = FDI_RX_IMR(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_RX_SYMBOL_LOCK;
+	temp &= ~FDI_RX_BIT_LOCK;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	DELAY(150);
+
+	/* enable CPU FDI TX and PCH FDI RX */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~(7 << 19);
+	temp |= (intel_crtc->fdi_lanes - 1) << 19;
+	temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
+	temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
+	temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+	temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+	temp |= FDI_COMPOSITE_SYNC;
+	I915_WRITE(reg, temp | FDI_TX_ENABLE);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_AUTO;
+	temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+	temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+	temp |= FDI_COMPOSITE_SYNC;
+	I915_WRITE(reg, temp | FDI_RX_ENABLE);
+
+	POSTING_READ(reg);
+	DELAY(150);
+
+	for (i = 0; i < 4; i++) {
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		temp |= snb_b_fdi_train_param[i];
+		I915_WRITE(reg, temp);
+
+		POSTING_READ(reg);
+		DELAY(500);
+
+		reg = FDI_RX_IIR(pipe);
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if (temp & FDI_RX_BIT_LOCK ||
+		    (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
+			I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+			DRM_DEBUG_KMS("FDI train 1 done.\n");
+			break;
+		}
+	}
+	if (i == 4)
+		DRM_ERROR("FDI train 1 fail!\n");
+
+	/* Train 2 */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE_IVB;
+	temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
+	temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+	temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+	temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	DELAY(150);
+
+	for (i = 0; i < 4; i++ ) {
+		reg = FDI_TX_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+		temp |= snb_b_fdi_train_param[i];
+		I915_WRITE(reg, temp);
+
+		POSTING_READ(reg);
+		DELAY(500);
+
+		reg = FDI_RX_IIR(pipe);
+		temp = I915_READ(reg);
+		DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+		if (temp & FDI_RX_SYMBOL_LOCK) {
+			I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+			DRM_DEBUG_KMS("FDI train 2 done.\n");
+			break;
+		}
+	}
+	if (i == 4)
+		DRM_ERROR("FDI train 2 fail!\n");
+
+	DRM_DEBUG_KMS("FDI train done.\n");
 }
 
-void gen6_enable_rps(struct inteldrm_softc *dev_priv)
+static void ironlake_fdi_pll_enable(struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp;
+
+	/* Write the TU size bits so error detection works */
+	I915_WRITE(FDI_RX_TUSIZE1(pipe),
+		   I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
+
+	/* enable PCH FDI RX PLL, wait warmup plus DMI latency */
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~((0x7 << 19) | (0x7 << 16));
+	temp |= (intel_crtc->fdi_lanes - 1) << 19;
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
+
+	POSTING_READ(reg);
+	DELAY(200);
+
+	/* Switch from Rawclk to PCDclk */
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp | FDI_PCDCLK);
+
+	POSTING_READ(reg);
+	DELAY(200);
+
+	/* Enable CPU FDI TX PLL, always on for Ironlake */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+		I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
+
+		POSTING_READ(reg);
+		DELAY(100);
+	}
 }
 
-void ironlake_enable_drps(struct drm_device *dev)
+static void cpt_phase_pointer_disable(struct drm_device *dev, int pipe)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u32 flags = I915_READ(SOUTH_CHICKEN1);
+
+	flags &= ~(FDI_PHASE_SYNC_EN(pipe));
+	I915_WRITE(SOUTH_CHICKEN1, flags); /* once to disable... */
+	flags &= ~(FDI_PHASE_SYNC_OVR(pipe));
+	I915_WRITE(SOUTH_CHICKEN1, flags); /* then again to lock */
+	POSTING_READ(SOUTH_CHICKEN1);
 }
 
-void gen6_update_ring_freq(struct inteldrm_softc *dev_priv)
+static void ironlake_fdi_disable(struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp;
+
+	/* disable CPU FDI tx and PCH FDI rx */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
+	POSTING_READ(reg);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~(0x7 << 16);
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
+
+	POSTING_READ(reg);
+	DELAY(100);
+
+	/* Ironlake workaround, disable clock pointer after downing FDI */
+	if (HAS_PCH_IBX(dev_priv)) {
+		I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
+		I915_WRITE(FDI_RX_CHICKEN(pipe),
+			   I915_READ(FDI_RX_CHICKEN(pipe) &
+				     ~FDI_RX_PHASE_SYNC_POINTER_EN));
+	} else if (HAS_PCH_CPT(dev_priv)) {
+		cpt_phase_pointer_disable(dev, pipe);
+	}
+
+	/* still set train pattern 1 */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_PATTERN_1;
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev_priv)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_PATTERN_1;
+	}
+	/* BPC in FDI rx is consistent with that in PIPECONF */
+	temp &= ~(0x07 << 16);
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	I915_WRITE(reg, temp);
+
+	POSTING_READ(reg);
+	DELAY(100);
 }
 
-void intel_init_emon(struct drm_device *dev)
+/*
+ * When we disable a pipe, we need to clear any pending scanline wait events
+ * to avoid hanging the ring, which we assume we are waiting on.
+ */
+static void intel_clear_scanline_wait(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_ring_buffer *ring;
+	u32 tmp;
+
+	if (IS_GEN2(dev_priv))
+		/* Can't break the hang on i8xx */
+		return;
+
+	ring = LP_RING(dev_priv);
+	tmp = I915_READ_CTL(ring);
+	if (tmp & RING_WAIT)
+		I915_WRITE_CTL(ring, tmp);
+}
+
+static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc)
 {
 	printf("%s stub\n", __func__);
+#ifdef notyet
+	struct drm_i915_gem_object *obj;
+	struct inteldrm_softc *dev_priv;
+	struct drm_device *dev;
+
+	if (crtc->fb == NULL)
+		return;
+
+	obj = to_intel_framebuffer(crtc->fb)->obj;
+	dev = crtc->dev;
+	dev_priv = dev->dev_private;
+	mtx_enter(&dev->event_lock);
+	while (atomic_read(&obj->pending_flip) != 0)
+		msleep(&obj->pending_flip, &dev->event_lock, 0, "915wfl", 0);
+	mtx_leave(&dev->event_lock);
+#endif
+}
+
+static bool intel_crtc_driving_pch(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_encoder *encoder;
+	struct intel_encoder *intel_encoder;
+
+	/*
+	 * If there's a non-PCH eDP on this crtc, it must be DP_A, and that
+	 * must be driven by its own crtc; no sharing is possible.
+	 */
+	TAILQ_FOREACH(encoder, &mode_config->encoder_list, head) {
+		intel_encoder = to_intel_encoder(encoder);
+		if (encoder->crtc != crtc)
+			continue;
+
+		switch (intel_encoder->type) {
+		case INTEL_OUTPUT_EDP:
+			if (!intel_encoder_is_pch_edp(encoder))
+				return false;
+			continue;
+		}
+	}
+
+	return true;
+}
+
+/*
+ * Enable PCH resources required for PCH ports:
+ *   - PCH PLLs
+ *   - FDI training & RX/TX
+ *   - update transcoder timings
+ *   - DP transcoding bits
+ *   - transcoder
+ */
+static void ironlake_pch_enable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp, transc_sel;
+
+	/* For PCH output, training FDI link */
+	dev_priv->display.fdi_link_train(crtc);
+
+	intel_enable_pch_pll(dev_priv, pipe);
+
+	if (HAS_PCH_CPT(dev_priv)) {
+		transc_sel = intel_crtc->use_pll_a ? TRANSC_DPLLA_SEL :
+			TRANSC_DPLLB_SEL;
+
+		/* Be sure PCH DPLL SEL is set */
+		temp = I915_READ(PCH_DPLL_SEL);
+		if (pipe == 0) {
+			temp &= ~(TRANSA_DPLLB_SEL);
+			temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL);
+		} else if (pipe == 1) {
+			temp &= ~(TRANSB_DPLLB_SEL);
+			temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
+		} else if (pipe == 2) {
+			temp &= ~(TRANSC_DPLLB_SEL);
+			temp |= (TRANSC_DPLL_ENABLE | transc_sel);
+		}
+		I915_WRITE(PCH_DPLL_SEL, temp);
+	}
+
+	/* set transcoder timing, panel must allow it */
+	assert_panel_unlocked(dev_priv, pipe);
+	I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe)));
+	I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe)));
+	I915_WRITE(TRANS_HSYNC(pipe),  I915_READ(HSYNC(pipe)));
+
+	I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe)));
+	I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
+	I915_WRITE(TRANS_VSYNC(pipe),  I915_READ(VSYNC(pipe)));
+	I915_WRITE(TRANS_VSYNCSHIFT(pipe),  I915_READ(VSYNCSHIFT(pipe)));
+
+	intel_fdi_normal_train(crtc);
+
+	/* For PCH DP, enable TRANS_DP_CTL */
+	if (HAS_PCH_CPT(dev_priv) &&
+	    (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
+	     intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
+		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
+		reg = TRANS_DP_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~(TRANS_DP_PORT_SEL_MASK |
+			  TRANS_DP_SYNC_MASK |
+			  TRANS_DP_BPC_MASK);
+		temp |= (TRANS_DP_OUTPUT_ENABLE |
+			 TRANS_DP_ENH_FRAMING);
+		temp |= bpc << 9; /* same format but at 11:9 */
+
+		if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
+			temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
+		if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
+			temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
+
+		switch (intel_trans_dp_port_sel(crtc)) {
+		case PCH_DP_B:
+			temp |= TRANS_DP_PORT_SEL_B;
+			break;
+		case PCH_DP_C:
+			temp |= TRANS_DP_PORT_SEL_C;
+			break;
+		case PCH_DP_D:
+			temp |= TRANS_DP_PORT_SEL_D;
+			break;
+		default:
+			DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n");
+			temp |= TRANS_DP_PORT_SEL_B;
+			break;
+		}
+
+		I915_WRITE(reg, temp);
+	}
+
+	intel_enable_transcoder(dev_priv, pipe);
+}
+
+void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	int dslreg = PIPEDSL(pipe), tc2reg = TRANS_CHICKEN2(pipe);
+	u32 temp;
+	int retries;
+
+	temp = I915_READ(dslreg);
+	DELAY(500);
+	for (retries = 5; retries > 0; retries--) {
+		if (I915_READ(dslreg) != temp)
+			break;
+		DELAY(1);
+	}
+	if (retries == 0) {
+		/* Without this, mode sets may fail silently on FDI */
+		I915_WRITE(tc2reg, TRANS_AUTOTRAIN_GEN_STALL_DIS);
+		DELAY(250);
+		I915_WRITE(tc2reg, 0);
+		for (retries = 5; retries > 0; retries--) {
+			if (I915_READ(dslreg) != temp)
+				break;
+			DELAY(1);
+		}
+		if (retries == 0)
+			DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
+	}
+}
+
+static void ironlake_crtc_enable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	u32 temp;
+	bool is_pch_port;
+
+	if (intel_crtc->active)
+		return;
+
+	intel_crtc->active = true;
+	intel_update_watermarks(dev);
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+		temp = I915_READ(PCH_LVDS);
+		if ((temp & LVDS_PORT_EN) == 0)
+			I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
+	}
+
+	is_pch_port = intel_crtc_driving_pch(crtc);
+
+	if (is_pch_port)
+		ironlake_fdi_pll_enable(crtc);
+	else
+		ironlake_fdi_disable(crtc);
+
+	/* Enable panel fitting for LVDS */
+	if (dev_priv->pch_pf_size &&
+	    (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) {
+		/* Force use of hard-coded filter coefficients
+		 * as some pre-programmed values are broken,
+		 * e.g. x201.
+		 */
+		I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
+		I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos);
+		I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size);
+	}
+
+	intel_enable_pipe(dev_priv, pipe, is_pch_port);
+	intel_enable_plane(dev_priv, plane, pipe);
+
+	if (is_pch_port)
+		ironlake_pch_enable(crtc);
+
+	intel_crtc_load_lut(crtc);
+
+	DRM_LOCK();
+	intel_update_fbc(dev);
+	DRM_UNLOCK();
+
+	intel_crtc_update_cursor(crtc, true);
+}
+
+static void ironlake_crtc_disable(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	u32 reg, temp;
+
+	if (!intel_crtc->active)
+		return;
+
+	intel_crtc_wait_for_pending_flips(crtc);
+	drm_vblank_off(dev, pipe);
+	intel_crtc_update_cursor(crtc, false);
+
+	intel_disable_plane(dev_priv, plane, pipe);
+
+	if (dev_priv->cfb_plane == plane)
+		intel_disable_fbc(dev);
+
+	intel_disable_pipe(dev_priv, pipe);
+
+	/* Disable PF */
+	I915_WRITE(PF_CTL(pipe), 0);
+	I915_WRITE(PF_WIN_SZ(pipe), 0);
+
+	ironlake_fdi_disable(crtc);
+
+	/* This is a horrible layering violation; we should be doing this in
+	 * the connector/encoder ->prepare instead, but we don't always have
+	 * enough information there about the config to know whether it will
+	 * actually be necessary or just cause undesired flicker.
+	 */
+	intel_disable_pch_ports(dev_priv, pipe);
+
+	intel_disable_transcoder(dev_priv, pipe);
+
+	if (HAS_PCH_CPT(dev_priv)) {
+		/* disable TRANS_DP_CTL */
+		reg = TRANS_DP_CTL(pipe);
+		temp = I915_READ(reg);
+		temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
+		temp |= TRANS_DP_PORT_SEL_NONE;
+		I915_WRITE(reg, temp);
+
+		/* disable DPLL_SEL */
+		temp = I915_READ(PCH_DPLL_SEL);
+		switch (pipe) {
+		case 0:
+			temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
+			break;
+		case 1:
+			temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
+			break;
+		case 2:
+			/* C shares PLL A or B */
+			temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
+			break;
+		default:
+			panic("Wrong pipe %d", pipe);
+		}
+		I915_WRITE(PCH_DPLL_SEL, temp);
+	}
+
+	/* disable PCH DPLL */
+	if (!intel_crtc->no_pll)
+		intel_disable_pch_pll(dev_priv, pipe);
+
+	/* Switch from PCDclk to Rawclk */
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp & ~FDI_PCDCLK);
+
+	/* Disable CPU FDI TX PLL */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
+
+	POSTING_READ(reg);
+	DELAY(100);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
+
+	/* Wait for the clocks to turn off. */
+	POSTING_READ(reg);
+	DELAY(100);
+
+	intel_crtc->active = false;
+	intel_update_watermarks(dev);
+
+	DRM_LOCK();
+	intel_update_fbc(dev);
+	intel_clear_scanline_wait(dev);
+	DRM_UNLOCK();
 }
 
 static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
 {
-	printf("%s stub\n", __func__);
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+
+	/* XXX: When our outputs are all unaware of DPMS modes other than off
+	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+	 */
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
+		ironlake_crtc_enable(crtc);
+		break;
+
+	case DRM_MODE_DPMS_OFF:
+		DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
+		ironlake_crtc_disable(crtc);
+		break;
+	}
 }
 
-static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
-				  struct drm_display_mode *mode,
-				  struct drm_display_mode *adjusted_mode,
-				  int x, int y,
-				  struct drm_framebuffer *old_fb)
+static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable)
 {
-	printf("%s stub\n", __func__);
-	return EINVAL;
+	if (!enable && intel_crtc->overlay) {
+		struct drm_device *dev = intel_crtc->base.dev;
+//		struct inteldrm_softc *dev_priv = dev->dev_private;
+
+		DRM_LOCK();
+//		dev_priv->mm.interruptible = false;
+		(void) intel_overlay_switch_off(intel_crtc->overlay);
+//		dev_priv->mm.interruptible = true;
+		DRM_UNLOCK();
+	}
+
+	/* Let userspace switch the overlay on again. In most cases userspace
+	 * has to recompute where to put it anyway.
+	 */
 }
 
-static int ironlake_update_plane(struct drm_crtc *crtc,
-				 struct drm_framebuffer *fb, int x, int y)
+static void i9xx_crtc_enable(struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
-	return EINVAL;
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+
+	if (intel_crtc->active)
+		return;
+
+	intel_crtc->active = true;
+	intel_update_watermarks(dev);
+
+	intel_enable_pll(dev_priv, pipe);
+	intel_enable_pipe(dev_priv, pipe, false);
+	intel_enable_plane(dev_priv, plane, pipe);
+
+	intel_crtc_load_lut(crtc);
+	intel_update_fbc(dev);
+
+	/* Give the overlay scaler a chance to enable if it's on this pipe */
+	intel_crtc_dpms_overlay(intel_crtc, true);
+	intel_crtc_update_cursor(crtc, true);
 }
 
-static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
+static void i9xx_crtc_disable(struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+
+	if (!intel_crtc->active)
+		return;
+
+	/* Give the overlay scaler a chance to disable if it's on this pipe */
+	intel_crtc_wait_for_pending_flips(crtc);
+	drm_vblank_off(dev, pipe);
+	intel_crtc_dpms_overlay(intel_crtc, false);
+	intel_crtc_update_cursor(crtc, false);
+
+	if (dev_priv->cfb_plane == plane)
+		intel_disable_fbc(dev);
+
+	intel_disable_plane(dev_priv, plane, pipe);
+	intel_disable_pipe(dev_priv, pipe);
+	intel_disable_pll(dev_priv, pipe);
+
+	intel_crtc->active = false;
+	intel_update_fbc(dev);
+	intel_update_watermarks(dev);
+	intel_clear_scanline_wait(dev);
 }
 
-static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
-			      struct drm_display_mode *mode,
-			      struct drm_display_mode *adjusted_mode,
-			      int x, int y,
-			      struct drm_framebuffer *old_fb)
+static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
 {
-	printf("%s stub\n", __func__);
-	return EINVAL;
+	/* XXX: When our outputs are all unaware of DPMS modes other than off
+	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+	 */
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		i9xx_crtc_enable(crtc);
+		break;
+	case DRM_MODE_DPMS_OFF:
+		i9xx_crtc_disable(crtc);
+		break;
+	}
 }
 
-static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
-			     int x, int y)
+/**
+ * Sets the power management mode of the pipe and plane.
+ */
+static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
 {
-	printf("%s stub\n", __func__);
-	return EINVAL;
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+#if 0
+	struct drm_i915_master_private *master_priv;
+#endif
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	bool enabled;
+
+	if (intel_crtc->dpms_mode == mode)
+		return;
+
+	intel_crtc->dpms_mode = mode;
+
+	dev_priv->display.dpms(crtc, mode);
+
+#if 0
+	if (!dev->primary->master)
+		return;
+
+	master_priv = dev->primary->master->driver_priv;
+	if (!master_priv->sarea_priv)
+		return;
+#else
+	if (!dev_priv->sarea_priv)
+		return;
+#endif
+
+	enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF;
+
+	switch (pipe) {
+	case 0:
+#if 0
+		master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0;
+		master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0;
+#else
+		dev_priv->sarea_priv->planeA_w = enabled ? crtc->mode.hdisplay : 0;
+		dev_priv->sarea_priv->planeA_h = enabled ? crtc->mode.vdisplay : 0;
+#endif
+		break;
+	case 1:
+#if 0
+		master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0;
+		master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0;
+#else
+		dev_priv->sarea_priv->planeB_w = enabled ? crtc->mode.hdisplay : 0;
+		dev_priv->sarea_priv->planeB_h = enabled ? crtc->mode.vdisplay : 0;
+#endif
+		break;
+	default:
+		DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe));
+		break;
+	}
 }
 
-static bool ironlake_fbc_enabled(struct drm_device *dev)
+static void intel_crtc_disable(struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
-	return false;
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	struct drm_device *dev = crtc->dev;
+
+	/* Flush any pending WAITs before we disable the pipe. Note that
+	 * we need to drop the struct_mutex in order to acquire it again
+	 * during the lowlevel dpms routines around a couple of the
+	 * operations. It does not look trivial nor desirable to move
+	 * that locking higher. So instead we leave a window for the
+	 * submission of further commands on the fb before we can actually
+	 * disable it. This race with userspace exists anyway, and we can
+	 * only rely on the pipe being disabled by userspace after it
+	 * receives the hotplug notification and has flushed any pending
+	 * batches.
+	 */
+	if (crtc->fb) {
+		DRM_LOCK();
+		intel_finish_fb(crtc->fb);
+		DRM_UNLOCK();
+	}
+
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+ 	assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
+	assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
+
+	if (crtc->fb) {
+		DRM_LOCK();
+#ifdef notyet
+		intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
+#else
+		printf("%s todo unpin fb\n", __func__);
+#endif
+		DRM_UNLOCK();
+	}
 }
 
-static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+/* Prepare for a mode set.
+ *
+ * Note we could be a lot smarter here.  We need to figure out which outputs
+ * will be enabled, which disabled (in short, how the config will changes)
+ * and perform the minimum necessary steps to accomplish that, e.g. updating
+ * watermarks, FBC configuration, making sure PLLs are programmed correctly,
+ * panel fitting is in the proper state, etc.
+ */
+static void i9xx_crtc_prepare(struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
+	i9xx_crtc_disable(crtc);
 }
 
-static void ironlake_disable_fbc(struct drm_device *dev)
+static void i9xx_crtc_commit(struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
+	i9xx_crtc_enable(crtc);
 }
 
-static bool g4x_fbc_enabled(struct drm_device *dev)
+static void ironlake_crtc_prepare(struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
-	return false;
+	ironlake_crtc_disable(crtc);
 }
 
-static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+static void ironlake_crtc_commit(struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
+	ironlake_crtc_enable(crtc);
 }
 
-static void g4x_disable_fbc(struct drm_device *dev)
+void intel_encoder_prepare(struct drm_encoder *encoder)
 {
-	printf("%s stub\n", __func__);
+	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+	/* lvds has its own version of prepare see intel_lvds_prepare */
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
 }
 
-static bool i8xx_fbc_enabled(struct drm_device *dev)
+void intel_encoder_commit(struct drm_encoder *encoder)
 {
-	printf("%s stub\n", __func__);
-	return false;
+	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+	struct drm_device *dev = encoder->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+	struct intel_crtc *intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
+
+	/* lvds has its own version of commit see intel_lvds_commit */
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+
+	if (HAS_PCH_CPT(dev_priv))
+		intel_cpt_verify_modeset(dev, intel_crtc->pipe);
 }
 
-static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+void intel_encoder_destroy(struct drm_encoder *encoder)
 {
-	printf("%s stub\n", __func__);
+	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+
+	drm_encoder_cleanup(encoder);
+	free(intel_encoder, M_DRM);
 }
 
-static void i8xx_disable_fbc(struct drm_device *dev)
+static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
 {
-	printf("%s stub\n", __func__);
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	if (HAS_PCH_SPLIT(dev_priv)) {
+		/* FDI link clock is fixed at 2.7G */
+		if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4)
+			return false;
+	}
+
+	/* All interlaced capable intel hw wants timings in frames. Note though
+	 * that intel_lvds_mode_fixup does some funny tricks with the crtc
+	 * timings, so we need to be careful not to clobber these.*/
+	if (!(adjusted_mode->private_flags & INTEL_MODE_CRTC_TIMINGS_SET))
+		drm_mode_set_crtcinfo(adjusted_mode, 0);
+
+	return true;
 }
 
 static int i945_get_display_clock_speed(struct drm_device *dev)
@@ -582,8 +3665,22 @@ static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
 
 static int i915gm_get_display_clock_speed(struct drm_device *dev)
 {
-	printf("%s stub\n", __func__);
-	return 0;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u32 gcfgc = 0;
+
+	gcfgc = pci_conf_read(dev_priv->pc, dev_priv->tag, GCFGC) >> 16;
+
+	if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
+		return 133000;
+	else {
+		switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
+		case GC_DISPLAY_CLOCK_333_MHZ:
+			return 333000;
+		default:
+		case GC_DISPLAY_CLOCK_190_200_MHZ:
+			return 190000;
+		}
+	}
 }
 
 static int i865_get_display_clock_speed(struct drm_device *dev)
@@ -593,7 +3690,21 @@ static int i865_get_display_clock_speed(struct drm_device *dev)
 
 static int i855_get_display_clock_speed(struct drm_device *dev)
 {
-	printf("%s stub\n", __func__);
+	u16 hpllcc = 0;
+	/* Assume that the hardware is in the high speed state.  This
+	 * should be the default.
+	 */
+	switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
+	case GC_CLOCK_133_200:
+	case GC_CLOCK_100_200:
+		return 200000;
+	case GC_CLOCK_166_250:
+		return 250000;
+	case GC_CLOCK_100_133:
+		return 133000;
+	}
+
+	/* Shouldn't happen */
 	return 0;
 }
 
@@ -602,233 +3713,2737 @@ static int i830_get_display_clock_speed(struct drm_device *dev)
 	return 133000;
 }
 
-static void ibx_init_clock_gating(struct drm_device *dev)
+struct fdi_m_n {
+	u32        tu;
+	u32        gmch_m;
+	u32        gmch_n;
+	u32        link_m;
+	u32        link_n;
+};
+
+static void
+fdi_reduce_ratio(u32 *num, u32 *den)
 {
-	printf("%s stub\n", __func__);
+	while (*num > 0xffffff || *den > 0xffffff) {
+		*num >>= 1;
+		*den >>= 1;
+	}
 }
 
-static void cpt_init_clock_gating(struct drm_device *dev)
+static void
+ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
+		     int link_clock, struct fdi_m_n *m_n)
 {
-	printf("%s stub\n", __func__);
+	m_n->tu = 64; /* default size */
+
+	/* BUG_ON(pixel_clock > INT_MAX / 36); */
+	m_n->gmch_m = bits_per_pixel * pixel_clock;
+	m_n->gmch_n = link_clock * nlanes * 8;
+	fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
+
+	m_n->link_m = pixel_clock;
+	m_n->link_n = link_clock;
+	fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
 }
 
-static void ironlake_update_wm(struct drm_device *dev)
+
+struct intel_watermark_params {
+	unsigned long fifo_size;
+	unsigned long max_wm;
+	unsigned long default_wm;
+	unsigned long guard_size;
+	unsigned long cacheline_size;
+};
+
+/* Pineview has different values for various configs */
+static const struct intel_watermark_params pineview_display_wm = {
+	PINEVIEW_DISPLAY_FIFO,
+	PINEVIEW_MAX_WM,
+	PINEVIEW_DFT_WM,
+	PINEVIEW_GUARD_WM,
+	PINEVIEW_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params pineview_display_hplloff_wm = {
+	PINEVIEW_DISPLAY_FIFO,
+	PINEVIEW_MAX_WM,
+	PINEVIEW_DFT_HPLLOFF_WM,
+	PINEVIEW_GUARD_WM,
+	PINEVIEW_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params pineview_cursor_wm = {
+	PINEVIEW_CURSOR_FIFO,
+	PINEVIEW_CURSOR_MAX_WM,
+	PINEVIEW_CURSOR_DFT_WM,
+	PINEVIEW_CURSOR_GUARD_WM,
+	PINEVIEW_FIFO_LINE_SIZE,
+};
+static const struct intel_watermark_params pineview_cursor_hplloff_wm = {
+	PINEVIEW_CURSOR_FIFO,
+	PINEVIEW_CURSOR_MAX_WM,
+	PINEVIEW_CURSOR_DFT_WM,
+	PINEVIEW_CURSOR_GUARD_WM,
+	PINEVIEW_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params g4x_wm_info = {
+	G4X_FIFO_SIZE,
+	G4X_MAX_WM,
+	G4X_MAX_WM,
+	2,
+	G4X_FIFO_LINE_SIZE,
+};
+static const struct intel_watermark_params g4x_cursor_wm_info = {
+	I965_CURSOR_FIFO,
+	I965_CURSOR_MAX_WM,
+	I965_CURSOR_DFT_WM,
+	2,
+	G4X_FIFO_LINE_SIZE,
+};
+static const struct intel_watermark_params i965_cursor_wm_info = {
+	I965_CURSOR_FIFO,
+	I965_CURSOR_MAX_WM,
+	I965_CURSOR_DFT_WM,
+	2,
+	I915_FIFO_LINE_SIZE,
+};
+static const struct intel_watermark_params i945_wm_info = {
+	I945_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	2,
+	I915_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params i915_wm_info = {
+	I915_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	2,
+	I915_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params i855_wm_info = {
+	I855GM_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	2,
+	I830_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params i830_wm_info = {
+	I830_FIFO_SIZE,
+	I915_MAX_WM,
+	1,
+	2,
+	I830_FIFO_LINE_SIZE
+};
+
+static const struct intel_watermark_params ironlake_display_wm_info = {
+	ILK_DISPLAY_FIFO,
+	ILK_DISPLAY_MAXWM,
+	ILK_DISPLAY_DFTWM,
+	2,
+	ILK_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params ironlake_cursor_wm_info = {
+	ILK_CURSOR_FIFO,
+	ILK_CURSOR_MAXWM,
+	ILK_CURSOR_DFTWM,
+	2,
+	ILK_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params ironlake_display_srwm_info = {
+	ILK_DISPLAY_SR_FIFO,
+	ILK_DISPLAY_MAX_SRWM,
+	ILK_DISPLAY_DFT_SRWM,
+	2,
+	ILK_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params ironlake_cursor_srwm_info = {
+	ILK_CURSOR_SR_FIFO,
+	ILK_CURSOR_MAX_SRWM,
+	ILK_CURSOR_DFT_SRWM,
+	2,
+	ILK_FIFO_LINE_SIZE
+};
+
+static const struct intel_watermark_params sandybridge_display_wm_info = {
+	SNB_DISPLAY_FIFO,
+	SNB_DISPLAY_MAXWM,
+	SNB_DISPLAY_DFTWM,
+	2,
+	SNB_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params sandybridge_cursor_wm_info = {
+	SNB_CURSOR_FIFO,
+	SNB_CURSOR_MAXWM,
+	SNB_CURSOR_DFTWM,
+	2,
+	SNB_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params sandybridge_display_srwm_info = {
+	SNB_DISPLAY_SR_FIFO,
+	SNB_DISPLAY_MAX_SRWM,
+	SNB_DISPLAY_DFT_SRWM,
+	2,
+	SNB_FIFO_LINE_SIZE
+};
+static const struct intel_watermark_params sandybridge_cursor_srwm_info = {
+	SNB_CURSOR_SR_FIFO,
+	SNB_CURSOR_MAX_SRWM,
+	SNB_CURSOR_DFT_SRWM,
+	2,
+	SNB_FIFO_LINE_SIZE
+};
+
+
+/**
+ * intel_calculate_wm - calculate watermark level
+ * @clock_in_khz: pixel clock
+ * @wm: chip FIFO params
+ * @pixel_size: display pixel size
+ * @latency_ns: memory latency for the platform
+ *
+ * Calculate the watermark level (the level at which the display plane will
+ * start fetching from memory again).  Each chip has a different display
+ * FIFO size and allocation, so the caller needs to figure that out and pass
+ * in the correct intel_watermark_params structure.
+ *
+ * As the pixel clock runs, the FIFO will be drained at a rate that depends
+ * on the pixel size.  When it reaches the watermark level, it'll start
+ * fetching FIFO line sized based chunks from memory until the FIFO fills
+ * past the watermark point.  If the FIFO drains completely, a FIFO underrun
+ * will occur, and a display engine hang could result.
+ */
+static unsigned long intel_calculate_wm(unsigned long clock_in_khz,
+					const struct intel_watermark_params *wm,
+					int fifo_size,
+					int pixel_size,
+					unsigned long latency_ns)
 {
-	printf("%s stub\n", __func__);
+	long entries_required, wm_size;
+
+	/*
+	 * Note: we need to make sure we don't overflow for various clock &
+	 * latency values.
+	 * clocks go from a few thousand to several hundred thousand.
+	 * latency is usually a few thousand
+	 */
+	entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) /
+		1000;
+	entries_required = howmany(entries_required, wm->cacheline_size);
+
+	DRM_DEBUG_KMS("FIFO entries required for mode: %ld\n", entries_required);
+
+	wm_size = fifo_size - (entries_required + wm->guard_size);
+
+	DRM_DEBUG_KMS("FIFO watermark level: %ld\n", wm_size);
+
+	/* Don't promote wm_size to unsigned... */
+	if (wm_size > (long)wm->max_wm)
+		wm_size = wm->max_wm;
+	if (wm_size <= 0)
+		wm_size = wm->default_wm;
+	return wm_size;
 }
 
-static void ironlake_fdi_link_train(struct drm_crtc *crtc)
+struct cxsr_latency {
+	int is_desktop;
+	int is_ddr3;
+	unsigned long fsb_freq;
+	unsigned long mem_freq;
+	unsigned long display_sr;
+	unsigned long display_hpll_disable;
+	unsigned long cursor_sr;
+	unsigned long cursor_hpll_disable;
+};
+
+static const struct cxsr_latency cxsr_latency_table[] = {
+	{1, 0, 800, 400, 3382, 33382, 3983, 33983},    /* DDR2-400 SC */
+	{1, 0, 800, 667, 3354, 33354, 3807, 33807},    /* DDR2-667 SC */
+	{1, 0, 800, 800, 3347, 33347, 3763, 33763},    /* DDR2-800 SC */
+	{1, 1, 800, 667, 6420, 36420, 6873, 36873},    /* DDR3-667 SC */
+	{1, 1, 800, 800, 5902, 35902, 6318, 36318},    /* DDR3-800 SC */
+
+	{1, 0, 667, 400, 3400, 33400, 4021, 34021},    /* DDR2-400 SC */
+	{1, 0, 667, 667, 3372, 33372, 3845, 33845},    /* DDR2-667 SC */
+	{1, 0, 667, 800, 3386, 33386, 3822, 33822},    /* DDR2-800 SC */
+	{1, 1, 667, 667, 6438, 36438, 6911, 36911},    /* DDR3-667 SC */
+	{1, 1, 667, 800, 5941, 35941, 6377, 36377},    /* DDR3-800 SC */
+
+	{1, 0, 400, 400, 3472, 33472, 4173, 34173},    /* DDR2-400 SC */
+	{1, 0, 400, 667, 3443, 33443, 3996, 33996},    /* DDR2-667 SC */
+	{1, 0, 400, 800, 3430, 33430, 3946, 33946},    /* DDR2-800 SC */
+	{1, 1, 400, 667, 6509, 36509, 7062, 37062},    /* DDR3-667 SC */
+	{1, 1, 400, 800, 5985, 35985, 6501, 36501},    /* DDR3-800 SC */
+
+	{0, 0, 800, 400, 3438, 33438, 4065, 34065},    /* DDR2-400 SC */
+	{0, 0, 800, 667, 3410, 33410, 3889, 33889},    /* DDR2-667 SC */
+	{0, 0, 800, 800, 3403, 33403, 3845, 33845},    /* DDR2-800 SC */
+	{0, 1, 800, 667, 6476, 36476, 6955, 36955},    /* DDR3-667 SC */
+	{0, 1, 800, 800, 5958, 35958, 6400, 36400},    /* DDR3-800 SC */
+
+	{0, 0, 667, 400, 3456, 33456, 4103, 34106},    /* DDR2-400 SC */
+	{0, 0, 667, 667, 3428, 33428, 3927, 33927},    /* DDR2-667 SC */
+	{0, 0, 667, 800, 3443, 33443, 3905, 33905},    /* DDR2-800 SC */
+	{0, 1, 667, 667, 6494, 36494, 6993, 36993},    /* DDR3-667 SC */
+	{0, 1, 667, 800, 5998, 35998, 6460, 36460},    /* DDR3-800 SC */
+
+	{0, 0, 400, 400, 3528, 33528, 4255, 34255},    /* DDR2-400 SC */
+	{0, 0, 400, 667, 3500, 33500, 4079, 34079},    /* DDR2-667 SC */
+	{0, 0, 400, 800, 3487, 33487, 4029, 34029},    /* DDR2-800 SC */
+	{0, 1, 400, 667, 6566, 36566, 7145, 37145},    /* DDR3-667 SC */
+	{0, 1, 400, 800, 6042, 36042, 6584, 36584},    /* DDR3-800 SC */
+};
+
+static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop,
+							 int is_ddr3,
+							 int fsb,
+							 int mem)
 {
-	printf("%s stub\n", __func__);
+	const struct cxsr_latency *latency;
+	int i;
+
+	if (fsb == 0 || mem == 0)
+		return NULL;
+
+	for (i = 0; i < nitems(cxsr_latency_table); i++) {
+		latency = &cxsr_latency_table[i];
+		if (is_desktop == latency->is_desktop &&
+		    is_ddr3 == latency->is_ddr3 &&
+		    fsb == latency->fsb_freq && mem == latency->mem_freq)
+			return latency;
+	}
+
+	DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
+
+	return NULL;
 }
 
-static void ironlake_init_clock_gating(struct drm_device *dev)
+static void pineview_disable_cxsr(struct drm_device *dev)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	/* deactivate cxsr */
+	I915_WRITE(DSPFW3, I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN);
 }
 
-static void ironlake_write_eld(struct drm_connector *connector,
-			       struct drm_crtc *crtc)
+/*
+ * Latency for FIFO fetches is dependent on several factors:
+ *   - memory configuration (speed, channels)
+ *   - chipset
+ *   - current MCH state
+ * It can be fairly high in some situations, so here we assume a fairly
+ * pessimal value.  It's a tradeoff between extra memory fetches (if we
+ * set this value too high, the FIFO will fetch frequently to stay full)
+ * and power consumption (set it too low to save power and we might see
+ * FIFO underruns and display "flicker").
+ *
+ * A value of 5us seems to be a good balance; safe for very low end
+ * platforms but not overly aggressive on lower latency configs.
+ */
+static const int latency_ns = 5000;
+
+static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	uint32_t dsparb = I915_READ(DSPARB);
+	int size;
+
+	size = dsparb & 0x7f;
+	if (plane)
+		size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size;
+
+	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
+		      plane ? "B" : "A", size);
+
+	return size;
 }
 
-void sandybridge_update_wm(struct drm_device *dev)
+static int i85x_get_fifo_size(struct drm_device *dev, int plane)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	uint32_t dsparb = I915_READ(DSPARB);
+	int size;
+
+	size = dsparb & 0x1ff;
+	if (plane)
+		size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size;
+	size >>= 1; /* Convert to cachelines */
+
+	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
+		      plane ? "B" : "A", size);
+
+	return size;
 }
 
-static void sandybridge_update_sprite_wm(struct drm_device *dev, int pipe,
-					 uint32_t sprite_width, int pixel_size)
+static int i845_get_fifo_size(struct drm_device *dev, int plane)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	uint32_t dsparb = I915_READ(DSPARB);
+	int size;
+
+	size = dsparb & 0x7f;
+	size >>= 2; /* Convert to cachelines */
+
+	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
+		      plane ? "B" : "A",
+		      size);
+
+	return size;
 }
 
-static void gen6_fdi_link_train(struct drm_crtc *crtc)
+static int i830_get_fifo_size(struct drm_device *dev, int plane)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	uint32_t dsparb = I915_READ(DSPARB);
+	int size;
+
+	size = dsparb & 0x7f;
+	size >>= 1; /* Convert to cachelines */
+
+	DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb,
+		      plane ? "B" : "A", size);
+
+	return size;
 }
 
-static void gen6_init_clock_gating(struct drm_device *dev)
+static struct drm_crtc *single_enabled_crtc(struct drm_device *dev)
 {
-	printf("%s stub\n", __func__);
+	struct drm_crtc *crtc, *enabled = NULL;
+
+	TAILQ_FOREACH(crtc, &dev->mode_config.crtc_list, head) {
+		if (crtc->enabled && crtc->fb) {
+			if (enabled)
+				return NULL;
+			enabled = crtc;
+		}
+	}
+
+	return enabled;
 }
 
-static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
+static void pineview_update_wm(struct drm_device *dev)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	const struct cxsr_latency *latency;
+	u32 reg;
+	unsigned long wm;
+
+	latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev_priv), dev_priv->is_ddr3,
+					 dev_priv->fsb_freq, dev_priv->mem_freq);
+	if (!latency) {
+		DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
+		pineview_disable_cxsr(dev);
+		return;
+	}
+
+	crtc = single_enabled_crtc(dev);
+	if (crtc) {
+		int clock = crtc->mode.clock;
+		int pixel_size = crtc->fb->bits_per_pixel / 8;
+
+		/* Display SR */
+		wm = intel_calculate_wm(clock, &pineview_display_wm,
+					pineview_display_wm.fifo_size,
+					pixel_size, latency->display_sr);
+		reg = I915_READ(DSPFW1);
+		reg &= ~DSPFW_SR_MASK;
+		reg |= wm << DSPFW_SR_SHIFT;
+		I915_WRITE(DSPFW1, reg);
+		DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg);
+
+		/* cursor SR */
+		wm = intel_calculate_wm(clock, &pineview_cursor_wm,
+					pineview_display_wm.fifo_size,
+					pixel_size, latency->cursor_sr);
+		reg = I915_READ(DSPFW3);
+		reg &= ~DSPFW_CURSOR_SR_MASK;
+		reg |= (wm & 0x3f) << DSPFW_CURSOR_SR_SHIFT;
+		I915_WRITE(DSPFW3, reg);
+
+		/* Display HPLL off SR */
+		wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm,
+					pineview_display_hplloff_wm.fifo_size,
+					pixel_size, latency->display_hpll_disable);
+		reg = I915_READ(DSPFW3);
+		reg &= ~DSPFW_HPLL_SR_MASK;
+		reg |= wm & DSPFW_HPLL_SR_MASK;
+		I915_WRITE(DSPFW3, reg);
+
+		/* cursor HPLL off SR */
+		wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm,
+					pineview_display_hplloff_wm.fifo_size,
+					pixel_size, latency->cursor_hpll_disable);
+		reg = I915_READ(DSPFW3);
+		reg &= ~DSPFW_HPLL_CURSOR_MASK;
+		reg |= (wm & 0x3f) << DSPFW_HPLL_CURSOR_SHIFT;
+		I915_WRITE(DSPFW3, reg);
+		DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg);
+
+		/* activate cxsr */
+		I915_WRITE(DSPFW3,
+			   I915_READ(DSPFW3) | PINEVIEW_SELF_REFRESH_EN);
+		DRM_DEBUG_KMS("Self-refresh is enabled\n");
+	} else {
+		pineview_disable_cxsr(dev);
+		DRM_DEBUG_KMS("Self-refresh is disabled\n");
+	}
 }
 
-static void ivybridge_init_clock_gating(struct drm_device *dev)
+static bool g4x_compute_wm0(struct drm_device *dev,
+			    int plane,
+			    const struct intel_watermark_params *display,
+			    int display_latency_ns,
+			    const struct intel_watermark_params *cursor,
+			    int cursor_latency_ns,
+			    int *plane_wm,
+			    int *cursor_wm)
 {
-	printf("%s stub\n", __func__);
+	struct drm_crtc *crtc;
+	int htotal, hdisplay, clock, pixel_size;
+	int line_time_us, line_count;
+	int entries, tlb_miss;
+
+	crtc = intel_get_crtc_for_plane(dev, plane);
+	if (crtc->fb == NULL || !crtc->enabled) {
+		*cursor_wm = cursor->guard_size;
+		*plane_wm = display->guard_size;
+		return false;
+	}
+
+	htotal = crtc->mode.htotal;
+	hdisplay = crtc->mode.hdisplay;
+	clock = crtc->mode.clock;
+	pixel_size = crtc->fb->bits_per_pixel / 8;
+
+	/* Use the small buffer method to calculate plane watermark */
+	entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
+	tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8;
+	if (tlb_miss > 0)
+		entries += tlb_miss;
+	entries = howmany(entries, display->cacheline_size);
+	*plane_wm = entries + display->guard_size;
+	if (*plane_wm > (int)display->max_wm)
+		*plane_wm = display->max_wm;
+
+	/* Use the large buffer method to calculate cursor watermark */
+	line_time_us = ((htotal * 1000) / clock);
+	line_count = (cursor_latency_ns / line_time_us + 1000) / 1000;
+	entries = line_count * 64 * pixel_size;
+	tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8;
+	if (tlb_miss > 0)
+		entries += tlb_miss;
+	entries = howmany(entries, cursor->cacheline_size);
+	*cursor_wm = entries + cursor->guard_size;
+	if (*cursor_wm > (int)cursor->max_wm)
+		*cursor_wm = (int)cursor->max_wm;
+
+	return true;
 }
 
-static void pineview_update_wm(struct drm_device *dev)
+/*
+ * Check the wm result.
+ *
+ * If any calculated watermark values is larger than the maximum value that
+ * can be programmed into the associated watermark register, that watermark
+ * must be disabled.
+ */
+static bool g4x_check_srwm(struct drm_device *dev,
+			   int display_wm, int cursor_wm,
+			   const struct intel_watermark_params *display,
+			   const struct intel_watermark_params *cursor)
 {
-	printf("%s stub\n", __func__);
+	DRM_DEBUG_KMS("SR watermark: display plane %d, cursor %d\n",
+		      display_wm, cursor_wm);
+
+	if (display_wm > display->max_wm) {
+		DRM_DEBUG_KMS("display watermark is too large(%d/%ld), disabling\n",
+			      display_wm, display->max_wm);
+		return false;
+	}
+
+	if (cursor_wm > cursor->max_wm) {
+		DRM_DEBUG_KMS("cursor watermark is too large(%d/%ld), disabling\n",
+			      cursor_wm, cursor->max_wm);
+		return false;
+	}
+
+	if (!(display_wm || cursor_wm)) {
+		DRM_DEBUG_KMS("SR latency is 0, disabling\n");
+		return false;
+	}
+
+	return true;
 }
 
-static void gen3_init_clock_gating(struct drm_device *dev)
+static bool g4x_compute_srwm(struct drm_device *dev,
+			     int plane,
+			     int latency_ns,
+			     const struct intel_watermark_params *display,
+			     const struct intel_watermark_params *cursor,
+			     int *display_wm, int *cursor_wm)
 {
-	printf("%s stub\n", __func__);
+	struct drm_crtc *crtc;
+	int hdisplay, htotal, pixel_size, clock;
+	unsigned long line_time_us;
+	int line_count, line_size;
+	int small, large;
+	int entries;
+
+	if (!latency_ns) {
+		*display_wm = *cursor_wm = 0;
+		return false;
+	}
+
+	crtc = intel_get_crtc_for_plane(dev, plane);
+	hdisplay = crtc->mode.hdisplay;
+	htotal = crtc->mode.htotal;
+	clock = crtc->mode.clock;
+	pixel_size = crtc->fb->bits_per_pixel / 8;
+
+	line_time_us = (htotal * 1000) / clock;
+	line_count = (latency_ns / line_time_us + 1000) / 1000;
+	line_size = hdisplay * pixel_size;
+
+	/* Use the minimum of the small and large buffer method for primary */
+	small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
+	large = line_count * line_size;
+
+	entries = howmany(min(small, large), display->cacheline_size);
+	*display_wm = entries + display->guard_size;
+
+	/* calculate the self-refresh watermark for display cursor */
+	entries = line_count * pixel_size * 64;
+	entries = howmany(entries, cursor->cacheline_size);
+	*cursor_wm = entries + cursor->guard_size;
+
+	return g4x_check_srwm(dev,
+			      *display_wm, *cursor_wm,
+			      display, cursor);
 }
 
-static void g4x_write_eld(struct drm_connector *connector,
-			  struct drm_crtc *crtc)
+#define single_plane_enabled(mask) ((mask) != 0 && powerof2(mask))
+
+static void g4x_update_wm(struct drm_device *dev)
 {
-	printf("%s stub\n", __func__);
+	static const int sr_latency_ns = 12000;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	int planea_wm, planeb_wm, cursora_wm, cursorb_wm;
+	int plane_sr, cursor_sr;
+	unsigned int enabled = 0;
+
+	if (g4x_compute_wm0(dev, 0,
+			    &g4x_wm_info, latency_ns,
+			    &g4x_cursor_wm_info, latency_ns,
+			    &planea_wm, &cursora_wm))
+		enabled |= 1;
+
+	if (g4x_compute_wm0(dev, 1,
+			    &g4x_wm_info, latency_ns,
+			    &g4x_cursor_wm_info, latency_ns,
+			    &planeb_wm, &cursorb_wm))
+		enabled |= 2;
+
+	plane_sr = cursor_sr = 0;
+	if (single_plane_enabled(enabled) &&
+	    g4x_compute_srwm(dev, ffs(enabled) - 1,
+			     sr_latency_ns,
+			     &g4x_wm_info,
+			     &g4x_cursor_wm_info,
+			     &plane_sr, &cursor_sr))
+		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+	else
+		I915_WRITE(FW_BLC_SELF,
+			   I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN);
+
+	DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n",
+		      planea_wm, cursora_wm,
+		      planeb_wm, cursorb_wm,
+		      plane_sr, cursor_sr);
+
+	I915_WRITE(DSPFW1,
+		   (plane_sr << DSPFW_SR_SHIFT) |
+		   (cursorb_wm << DSPFW_CURSORB_SHIFT) |
+		   (planeb_wm << DSPFW_PLANEB_SHIFT) |
+		   planea_wm);
+	I915_WRITE(DSPFW2,
+		   (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) |
+		   (cursora_wm << DSPFW_CURSORA_SHIFT));
+	/* HPLL off in SR has some issues on G4x... disable it */
+	I915_WRITE(DSPFW3,
+		   (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) |
+		   (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
 }
 
-static void g4x_update_wm(struct drm_device *dev)
+static void i965_update_wm(struct drm_device *dev)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	int srwm = 1;
+	int cursor_sr = 16;
+
+	/* Calc sr entries for one plane configs */
+	crtc = single_enabled_crtc(dev);
+	if (crtc) {
+		/* self-refresh has much higher latency */
+		static const int sr_latency_ns = 12000;
+		int clock = crtc->mode.clock;
+		int htotal = crtc->mode.htotal;
+		int hdisplay = crtc->mode.hdisplay;
+		int pixel_size = crtc->fb->bits_per_pixel / 8;
+		unsigned long line_time_us;
+		int entries;
+
+		line_time_us = ((htotal * 1000) / clock);
+
+		/* Use ns/us then divide to preserve precision */
+		entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
+			pixel_size * hdisplay;
+		entries = howmany(entries, I915_FIFO_LINE_SIZE);
+		srwm = I965_FIFO_SIZE - entries;
+		if (srwm < 0)
+			srwm = 1;
+		srwm &= 0x1ff;
+		DRM_DEBUG_KMS("self-refresh entries: %d, wm: %d\n",
+			      entries, srwm);
+
+		entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
+			pixel_size * 64;
+		entries = howmany(entries, i965_cursor_wm_info.cacheline_size);
+		cursor_sr = i965_cursor_wm_info.fifo_size -
+			(entries + i965_cursor_wm_info.guard_size);
+
+		if (cursor_sr > i965_cursor_wm_info.max_wm)
+			cursor_sr = i965_cursor_wm_info.max_wm;
+
+		DRM_DEBUG_KMS("self-refresh watermark: display plane %d "
+			      "cursor %d\n", srwm, cursor_sr);
+
+		if (IS_CRESTLINE(dev_priv))
+			I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+	} else {
+		/* Turn off self refresh if both pipes are enabled */
+		if (IS_CRESTLINE(dev_priv))
+			I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
+				   & ~FW_BLC_SELF_EN);
+	}
+
+	DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n",
+		      srwm);
+
+	/* 965 has limitations... */
+	I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) |
+		   (8 << 16) | (8 << 8) | (8 << 0));
+	I915_WRITE(DSPFW2, (8 << 8) | (8 << 0));
+	/* update cursor SR watermark */
+	I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
 }
 
-static void g4x_init_clock_gating(struct drm_device *dev)
+static void i9xx_update_wm(struct drm_device *dev)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	const struct intel_watermark_params *wm_info;
+	uint32_t fwater_lo;
+	uint32_t fwater_hi;
+	int cwm, srwm = 1;
+	int fifo_size;
+	int planea_wm, planeb_wm;
+	struct drm_crtc *crtc, *enabled = NULL;
+
+	if (IS_I945GM(dev_priv))
+		wm_info = &i945_wm_info;
+	else if (!IS_GEN2(dev_priv))
+		wm_info = &i915_wm_info;
+	else
+		wm_info = &i855_wm_info;
+
+	fifo_size = dev_priv->display.get_fifo_size(dev, 0);
+	crtc = intel_get_crtc_for_plane(dev, 0);
+	if (crtc->enabled && crtc->fb) {
+		planea_wm = intel_calculate_wm(crtc->mode.clock,
+					       wm_info, fifo_size,
+					       crtc->fb->bits_per_pixel / 8,
+					       latency_ns);
+		enabled = crtc;
+	} else
+		planea_wm = fifo_size - wm_info->guard_size;
+
+	fifo_size = dev_priv->display.get_fifo_size(dev, 1);
+	crtc = intel_get_crtc_for_plane(dev, 1);
+	if (crtc->enabled && crtc->fb) {
+		planeb_wm = intel_calculate_wm(crtc->mode.clock,
+					       wm_info, fifo_size,
+					       crtc->fb->bits_per_pixel / 8,
+					       latency_ns);
+		if (enabled == NULL)
+			enabled = crtc;
+		else
+			enabled = NULL;
+	} else
+		planeb_wm = fifo_size - wm_info->guard_size;
+
+	DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
+
+	/*
+	 * Overlay gets an aggressive default since video jitter is bad.
+	 */
+	cwm = 2;
+
+	/* Play safe and disable self-refresh before adjusting watermarks. */
+	if (IS_I945G(dev_priv) || IS_I945GM(dev_priv))
+		I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | 0);
+	else if (IS_I915GM(dev_priv))
+		I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN);
+
+	/* Calc sr entries for one plane configs */
+	if (HAS_FW_BLC(dev_priv) && enabled) {
+		/* self-refresh has much higher latency */
+		static const int sr_latency_ns = 6000;
+		int clock = enabled->mode.clock;
+		int htotal = enabled->mode.htotal;
+		int hdisplay = enabled->mode.hdisplay;
+		int pixel_size = enabled->fb->bits_per_pixel / 8;
+		unsigned long line_time_us;
+		int entries;
+
+		line_time_us = (htotal * 1000) / clock;
+
+		/* Use ns/us then divide to preserve precision */
+		entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) *
+			pixel_size * hdisplay;
+		entries = howmany(entries, wm_info->cacheline_size);
+		DRM_DEBUG_KMS("self-refresh entries: %d\n", entries);
+		srwm = wm_info->fifo_size - entries;
+		if (srwm < 0)
+			srwm = 1;
+
+		if (IS_I945G(dev_priv) || IS_I945GM(dev_priv))
+			I915_WRITE(FW_BLC_SELF,
+				   FW_BLC_SELF_FIFO_MASK | (srwm & 0xff));
+		else if (IS_I915GM(dev_priv))
+			I915_WRITE(FW_BLC_SELF, srwm & 0x3f);
+	}
+
+	DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
+		      planea_wm, planeb_wm, cwm, srwm);
+
+	fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f);
+	fwater_hi = (cwm & 0x1f);
+
+	/* Set request length to 8 cachelines per fetch */
+	fwater_lo = fwater_lo | (1 << 24) | (1 << 8);
+	fwater_hi = fwater_hi | (1 << 8);
+
+	I915_WRITE(FW_BLC, fwater_lo);
+	I915_WRITE(FW_BLC2, fwater_hi);
+
+	if (HAS_FW_BLC(dev_priv)) {
+		if (enabled) {
+			if (IS_I945G(dev_priv) || IS_I945GM(dev_priv))
+				I915_WRITE(FW_BLC_SELF,
+					   FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
+			else if (IS_I915GM(dev_priv))
+				I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN);
+			DRM_DEBUG_KMS("memory self refresh enabled\n");
+		} else
+			DRM_DEBUG_KMS("memory self refresh disabled\n");
+	}
 }
 
-static void i965_update_wm(struct drm_device *dev)
+static void i830_update_wm(struct drm_device *dev)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	uint32_t fwater_lo;
+	int planea_wm;
+
+	crtc = single_enabled_crtc(dev);
+	if (crtc == NULL)
+		return;
+
+	planea_wm = intel_calculate_wm(crtc->mode.clock, &i830_wm_info,
+				       dev_priv->display.get_fifo_size(dev, 0),
+				       crtc->fb->bits_per_pixel / 8,
+				       latency_ns);
+	fwater_lo = I915_READ(FW_BLC) & ~0xfff;
+	fwater_lo |= (3<<8) | planea_wm;
+
+	DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm);
+
+	I915_WRITE(FW_BLC, fwater_lo);
 }
 
-static void crestline_init_clock_gating(struct drm_device *dev)
+#define ILK_LP0_PLANE_LATENCY		700
+#define ILK_LP0_CURSOR_LATENCY		1300
+
+/*
+ * Check the wm result.
+ *
+ * If any calculated watermark values is larger than the maximum value that
+ * can be programmed into the associated watermark register, that watermark
+ * must be disabled.
+ */
+static bool ironlake_check_srwm(struct drm_device *dev, int level,
+				int fbc_wm, int display_wm, int cursor_wm,
+				const struct intel_watermark_params *display,
+				const struct intel_watermark_params *cursor)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	DRM_DEBUG_KMS("watermark %d: display plane %d, fbc lines %d,"
+		      " cursor %d\n", level, display_wm, fbc_wm, cursor_wm);
+
+	if (fbc_wm > SNB_FBC_MAX_SRWM) {
+		DRM_DEBUG_KMS("fbc watermark(%d) is too large(%d), disabling wm%d+\n",
+			      fbc_wm, SNB_FBC_MAX_SRWM, level);
+
+		/* fbc has it's own way to disable FBC WM */
+		I915_WRITE(DISP_ARB_CTL,
+			   I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS);
+		return false;
+	}
+
+	if (display_wm > display->max_wm) {
+		DRM_DEBUG_KMS("display watermark(%d) is too large(%d), disabling wm%d+\n",
+			      display_wm, SNB_DISPLAY_MAX_SRWM, level);
+		return false;
+	}
+
+	if (cursor_wm > cursor->max_wm) {
+		DRM_DEBUG_KMS("cursor watermark(%d) is too large(%d), disabling wm%d+\n",
+			      cursor_wm, SNB_CURSOR_MAX_SRWM, level);
+		return false;
+	}
+
+	if (!(fbc_wm || display_wm || cursor_wm)) {
+		DRM_DEBUG_KMS("latency %d is 0, disabling wm%d+\n", level, level);
+		return false;
+	}
+
+	return true;
 }
 
-static void broadwater_init_clock_gating(struct drm_device *dev)
+/*
+ * Compute watermark values of WM[1-3],
+ */
+static bool ironlake_compute_srwm(struct drm_device *dev, int level, int plane,
+				  int latency_ns,
+				  const struct intel_watermark_params *display,
+				  const struct intel_watermark_params *cursor,
+				  int *fbc_wm, int *display_wm, int *cursor_wm)
 {
-	printf("%s stub\n", __func__);
+	struct drm_crtc *crtc;
+	unsigned long line_time_us;
+	int hdisplay, htotal, pixel_size, clock;
+	int line_count, line_size;
+	int small, large;
+	int entries;
+
+	if (!latency_ns) {
+		*fbc_wm = *display_wm = *cursor_wm = 0;
+		return false;
+	}
+
+	crtc = intel_get_crtc_for_plane(dev, plane);
+	hdisplay = crtc->mode.hdisplay;
+	htotal = crtc->mode.htotal;
+	clock = crtc->mode.clock;
+	pixel_size = crtc->fb->bits_per_pixel / 8;
+
+	line_time_us = (htotal * 1000) / clock;
+	line_count = (latency_ns / line_time_us + 1000) / 1000;
+	line_size = hdisplay * pixel_size;
+
+	/* Use the minimum of the small and large buffer method for primary */
+	small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
+	large = line_count * line_size;
+
+	entries = howmany(min(small, large), display->cacheline_size);
+	*display_wm = entries + display->guard_size;
+
+	/*
+	 * Spec says:
+	 * FBC WM = ((Final Primary WM * 64) / number of bytes per line) + 2
+	 */
+	*fbc_wm = howmany(*display_wm * 64, line_size) + 2;
+
+	/* calculate the self-refresh watermark for display cursor */
+	entries = line_count * pixel_size * 64;
+	entries = howmany(entries, cursor->cacheline_size);
+	*cursor_wm = entries + cursor->guard_size;
+
+	return ironlake_check_srwm(dev, level,
+				   *fbc_wm, *display_wm, *cursor_wm,
+				   display, cursor);
 }
 
-static void i9xx_update_wm(struct drm_device *dev)
+static void ironlake_update_wm(struct drm_device *dev)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	int fbc_wm, plane_wm, cursor_wm;
+	unsigned int enabled;
+
+	enabled = 0;
+	if (g4x_compute_wm0(dev, 0,
+			    &ironlake_display_wm_info,
+			    ILK_LP0_PLANE_LATENCY,
+			    &ironlake_cursor_wm_info,
+			    ILK_LP0_CURSOR_LATENCY,
+			    &plane_wm, &cursor_wm)) {
+		I915_WRITE(WM0_PIPEA_ILK,
+			   (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
+		DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
+			      " plane %d, " "cursor: %d\n",
+			      plane_wm, cursor_wm);
+		enabled |= 1;
+	}
+
+	if (g4x_compute_wm0(dev, 1,
+			    &ironlake_display_wm_info,
+			    ILK_LP0_PLANE_LATENCY,
+			    &ironlake_cursor_wm_info,
+			    ILK_LP0_CURSOR_LATENCY,
+			    &plane_wm, &cursor_wm)) {
+		I915_WRITE(WM0_PIPEB_ILK,
+			   (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
+		DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
+			      " plane %d, cursor: %d\n",
+			      plane_wm, cursor_wm);
+		enabled |= 2;
+	}
+
+	/*
+	 * Calculate and update the self-refresh watermark only when one
+	 * display plane is used.
+	 */
+	I915_WRITE(WM3_LP_ILK, 0);
+	I915_WRITE(WM2_LP_ILK, 0);
+	I915_WRITE(WM1_LP_ILK, 0);
+
+	if (!single_plane_enabled(enabled))
+		return;
+	enabled = ffs(enabled) - 1;
+
+	/* WM1 */
+	if (!ironlake_compute_srwm(dev, 1, enabled,
+				   ILK_READ_WM1_LATENCY() * 500,
+				   &ironlake_display_srwm_info,
+				   &ironlake_cursor_srwm_info,
+				   &fbc_wm, &plane_wm, &cursor_wm))
+		return;
+
+	I915_WRITE(WM1_LP_ILK,
+		   WM1_LP_SR_EN |
+		   (ILK_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+		   (fbc_wm << WM1_LP_FBC_SHIFT) |
+		   (plane_wm << WM1_LP_SR_SHIFT) |
+		   cursor_wm);
+
+	/* WM2 */
+	if (!ironlake_compute_srwm(dev, 2, enabled,
+				   ILK_READ_WM2_LATENCY() * 500,
+				   &ironlake_display_srwm_info,
+				   &ironlake_cursor_srwm_info,
+				   &fbc_wm, &plane_wm, &cursor_wm))
+		return;
+
+	I915_WRITE(WM2_LP_ILK,
+		   WM2_LP_EN |
+		   (ILK_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+		   (fbc_wm << WM1_LP_FBC_SHIFT) |
+		   (plane_wm << WM1_LP_SR_SHIFT) |
+		   cursor_wm);
+
+	/*
+	 * WM3 is unsupported on ILK, probably because we don't have latency
+	 * data for that power state
+	 */
 }
 
-static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
+void sandybridge_update_wm(struct drm_device *dev)
 {
-	printf("%s stub\n", __func__);
-	return 0;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	int latency = SNB_READ_WM0_LATENCY() * 100;	/* In unit 0.1us */
+	u32 val;
+	int fbc_wm, plane_wm, cursor_wm;
+	unsigned int enabled;
+
+	enabled = 0;
+	if (g4x_compute_wm0(dev, 0,
+			    &sandybridge_display_wm_info, latency,
+			    &sandybridge_cursor_wm_info, latency,
+			    &plane_wm, &cursor_wm)) {
+		val = I915_READ(WM0_PIPEA_ILK);
+		val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
+		I915_WRITE(WM0_PIPEA_ILK, val |
+			   ((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
+		DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
+			      " plane %d, " "cursor: %d\n",
+			      plane_wm, cursor_wm);
+		enabled |= 1;
+	}
+
+	if (g4x_compute_wm0(dev, 1,
+			    &sandybridge_display_wm_info, latency,
+			    &sandybridge_cursor_wm_info, latency,
+			    &plane_wm, &cursor_wm)) {
+		val = I915_READ(WM0_PIPEB_ILK);
+		val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
+		I915_WRITE(WM0_PIPEB_ILK, val |
+			   ((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
+		DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
+			      " plane %d, cursor: %d\n",
+			      plane_wm, cursor_wm);
+		enabled |= 2;
+	}
+
+	/* IVB has 3 pipes */
+	if (IS_IVYBRIDGE(dev_priv) &&
+	    g4x_compute_wm0(dev, 2,
+			    &sandybridge_display_wm_info, latency,
+			    &sandybridge_cursor_wm_info, latency,
+			    &plane_wm, &cursor_wm)) {
+		val = I915_READ(WM0_PIPEC_IVB);
+		val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
+		I915_WRITE(WM0_PIPEC_IVB, val |
+			   ((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
+		DRM_DEBUG_KMS("FIFO watermarks For pipe C -"
+			      " plane %d, cursor: %d\n",
+			      plane_wm, cursor_wm);
+		enabled |= 3;
+	}
+
+	/*
+	 * Calculate and update the self-refresh watermark only when one
+	 * display plane is used.
+	 *
+	 * SNB support 3 levels of watermark.
+	 *
+	 * WM1/WM2/WM2 watermarks have to be enabled in the ascending order,
+	 * and disabled in the descending order
+	 *
+	 */
+	I915_WRITE(WM3_LP_ILK, 0);
+	I915_WRITE(WM2_LP_ILK, 0);
+	I915_WRITE(WM1_LP_ILK, 0);
+
+	if (!single_plane_enabled(enabled) ||
+	    dev_priv->sprite_scaling_enabled)
+		return;
+	enabled = ffs(enabled) - 1;
+
+	/* WM1 */
+	if (!ironlake_compute_srwm(dev, 1, enabled,
+				   SNB_READ_WM1_LATENCY() * 500,
+				   &sandybridge_display_srwm_info,
+				   &sandybridge_cursor_srwm_info,
+				   &fbc_wm, &plane_wm, &cursor_wm))
+		return;
+
+	I915_WRITE(WM1_LP_ILK,
+		   WM1_LP_SR_EN |
+		   (SNB_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+		   (fbc_wm << WM1_LP_FBC_SHIFT) |
+		   (plane_wm << WM1_LP_SR_SHIFT) |
+		   cursor_wm);
+
+	/* WM2 */
+	if (!ironlake_compute_srwm(dev, 2, enabled,
+				   SNB_READ_WM2_LATENCY() * 500,
+				   &sandybridge_display_srwm_info,
+				   &sandybridge_cursor_srwm_info,
+				   &fbc_wm, &plane_wm, &cursor_wm))
+		return;
+
+	I915_WRITE(WM2_LP_ILK,
+		   WM2_LP_EN |
+		   (SNB_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+		   (fbc_wm << WM1_LP_FBC_SHIFT) |
+		   (plane_wm << WM1_LP_SR_SHIFT) |
+		   cursor_wm);
+
+	/* WM3 */
+	if (!ironlake_compute_srwm(dev, 3, enabled,
+				   SNB_READ_WM3_LATENCY() * 500,
+				   &sandybridge_display_srwm_info,
+				   &sandybridge_cursor_srwm_info,
+				   &fbc_wm, &plane_wm, &cursor_wm))
+		return;
+
+	I915_WRITE(WM3_LP_ILK,
+		   WM3_LP_EN |
+		   (SNB_READ_WM3_LATENCY() << WM1_LP_LATENCY_SHIFT) |
+		   (fbc_wm << WM1_LP_FBC_SHIFT) |
+		   (plane_wm << WM1_LP_SR_SHIFT) |
+		   cursor_wm);
 }
 
-static void i830_update_wm(struct drm_device *dev)
+static bool
+sandybridge_compute_sprite_wm(struct drm_device *dev, int plane,
+			      uint32_t sprite_width, int pixel_size,
+			      const struct intel_watermark_params *display,
+			      int display_latency_ns, int *sprite_wm)
 {
-	printf("%s stub\n", __func__);
+	struct drm_crtc *crtc;
+	int clock;
+	int entries, tlb_miss;
+
+	crtc = intel_get_crtc_for_plane(dev, plane);
+	if (crtc->fb == NULL || !crtc->enabled) {
+		*sprite_wm = display->guard_size;
+		return false;
+	}
+
+	clock = crtc->mode.clock;
+
+	/* Use the small buffer method to calculate the sprite watermark */
+	entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000;
+	tlb_miss = display->fifo_size*display->cacheline_size -
+		sprite_width * 8;
+	if (tlb_miss > 0)
+		entries += tlb_miss;
+	entries = howmany(entries, display->cacheline_size);
+	*sprite_wm = entries + display->guard_size;
+	if (*sprite_wm > (int)display->max_wm)
+		*sprite_wm = display->max_wm;
+
+	return true;
 }
 
-static void i85x_init_clock_gating(struct drm_device *dev)
+static bool
+sandybridge_compute_sprite_srwm(struct drm_device *dev, int plane,
+				uint32_t sprite_width, int pixel_size,
+				const struct intel_watermark_params *display,
+				int latency_ns, int *sprite_wm)
 {
-	printf("%s stub\n", __func__);
+	struct drm_crtc *crtc;
+	unsigned long line_time_us;
+	int clock;
+	int line_count, line_size;
+	int small, large;
+	int entries;
+
+	if (!latency_ns) {
+		*sprite_wm = 0;
+		return false;
+	}
+
+	crtc = intel_get_crtc_for_plane(dev, plane);
+	clock = crtc->mode.clock;
+	if (!clock) {
+		*sprite_wm = 0;
+		return false;
+	}
+
+	line_time_us = (sprite_width * 1000) / clock;
+	if (!line_time_us) {
+		*sprite_wm = 0;
+		return false;
+	}
+
+	line_count = (latency_ns / line_time_us + 1000) / 1000;
+	line_size = sprite_width * pixel_size;
+
+	/* Use the minimum of the small and large buffer method for primary */
+	small = ((clock * pixel_size / 1000) * latency_ns) / 1000;
+	large = line_count * line_size;
+
+	entries = howmany(min(small, large), display->cacheline_size);
+	*sprite_wm = entries + display->guard_size;
+
+	return *sprite_wm > 0x3ff ? false : true;
 }
 
-static int i830_get_fifo_size(struct drm_device *dev, int plane)
+static void sandybridge_update_sprite_wm(struct drm_device *dev, int pipe,
+					 uint32_t sprite_width, int pixel_size)
 {
-	printf("%s stub\n", __func__);
-	return 0;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	int latency = SNB_READ_WM0_LATENCY() * 100;	/* In unit 0.1us */
+	u32 val;
+	int sprite_wm, reg;
+	int ret;
+
+	switch (pipe) {
+	case 0:
+		reg = WM0_PIPEA_ILK;
+		break;
+	case 1:
+		reg = WM0_PIPEB_ILK;
+		break;
+	case 2:
+		reg = WM0_PIPEC_IVB;
+		break;
+	default:
+		return; /* bad pipe */
+	}
+
+	ret = sandybridge_compute_sprite_wm(dev, pipe, sprite_width, pixel_size,
+					    &sandybridge_display_wm_info,
+					    latency, &sprite_wm);
+	if (!ret) {
+		DRM_DEBUG_KMS("failed to compute sprite wm for pipe %d\n",
+			      pipe);
+		return;
+	}
+
+	val = I915_READ(reg);
+	val &= ~WM0_PIPE_SPRITE_MASK;
+	I915_WRITE(reg, val | (sprite_wm << WM0_PIPE_SPRITE_SHIFT));
+	DRM_DEBUG_KMS("sprite watermarks For pipe %d - %d\n", pipe, sprite_wm);
+
+
+	ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
+					      pixel_size,
+					      &sandybridge_display_srwm_info,
+					      SNB_READ_WM1_LATENCY() * 500,
+					      &sprite_wm);
+	if (!ret) {
+		DRM_DEBUG_KMS("failed to compute sprite lp1 wm on pipe %d\n",
+			      pipe);
+		return;
+	}
+	I915_WRITE(WM1S_LP_ILK, sprite_wm);
+
+	/* Only IVB has two more LP watermarks for sprite */
+	if (!IS_IVYBRIDGE(dev_priv))
+		return;
+
+	ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
+					      pixel_size,
+					      &sandybridge_display_srwm_info,
+					      SNB_READ_WM2_LATENCY() * 500,
+					      &sprite_wm);
+	if (!ret) {
+		DRM_DEBUG_KMS("failed to compute sprite lp2 wm on pipe %d\n",
+			      pipe);
+		return;
+	}
+	I915_WRITE(WM2S_LP_IVB, sprite_wm);
+
+	ret = sandybridge_compute_sprite_srwm(dev, pipe, sprite_width,
+					      pixel_size,
+					      &sandybridge_display_srwm_info,
+					      SNB_READ_WM3_LATENCY() * 500,
+					      &sprite_wm);
+	if (!ret) {
+		DRM_DEBUG_KMS("failed to compute sprite lp3 wm on pipe %d\n",
+			      pipe);
+		return;
+	}
+	I915_WRITE(WM3S_LP_IVB, sprite_wm);
 }
 
-static int i85x_get_fifo_size(struct drm_device *dev, int plane)
+/**
+ * intel_update_watermarks - update FIFO watermark values based on current modes
+ *
+ * Calculate watermark values for the various WM regs based on current mode
+ * and plane configuration.
+ *
+ * There are several cases to deal with here:
+ *   - normal (i.e. non-self-refresh)
+ *   - self-refresh (SR) mode
+ *   - lines are large relative to FIFO size (buffer can hold up to 2)
+ *   - lines are small relative to FIFO size (buffer can hold more than 2
+ *     lines), so need to account for TLB latency
+ *
+ *   The normal calculation is:
+ *     watermark = dotclock * bytes per pixel * latency
+ *   where latency is platform & configuration dependent (we assume pessimal
+ *   values here).
+ *
+ *   The SR calculation is:
+ *     watermark = (trunc(latency/line time)+1) * surface width *
+ *       bytes per pixel
+ *   where
+ *     line time = htotal / dotclock
+ *     surface width = hdisplay for normal plane and 64 for cursor
+ *   and latency is assumed to be high, as above.
+ *
+ * The final value programmed to the register should always be rounded up,
+ * and include an extra 2 entries to account for clock crossings.
+ *
+ * We don't use the sprite, so we can ignore that.  And on Crestline we have
+ * to set the non-SR watermarks to 8.
+ */
+static void intel_update_watermarks(struct drm_device *dev)
 {
-	printf("%s stub\n", __func__);
-	return 0;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	if (dev_priv->display.update_wm)
+		dev_priv->display.update_wm(dev);
 }
 
-static void i830_init_clock_gating(struct drm_device *dev)
+void intel_update_sprite_watermarks(struct drm_device *dev, int pipe,
+				    uint32_t sprite_width, int pixel_size)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	if (dev_priv->display.update_sprite_wm)
+		dev_priv->display.update_sprite_wm(dev, pipe, sprite_width,
+						   pixel_size);
 }
 
-static int i845_get_fifo_size(struct drm_device *dev, int plane)
+static inline bool intel_panel_use_ssc(struct inteldrm_softc *dev_priv)
 {
-	printf("%s stub\n", __func__);
-	return 0;
+	if (i915_panel_use_ssc >= 0)
+		return i915_panel_use_ssc != 0;
+	return dev_priv->lvds_use_ssc
+		&& !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
 }
 
-static void intel_disable_plane(struct inteldrm_softc *dev_priv,
-				enum plane plane, enum pipe pipe)
+/**
+ * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send
+ * @crtc: CRTC structure
+ * @mode: requested mode
+ *
+ * A pipe may be connected to one or more outputs.  Based on the depth of the
+ * attached framebuffer, choose a good color depth to use on the pipe.
+ *
+ * If possible, match the pipe depth to the fb depth.  In some cases, this
+ * isn't ideal, because the connected output supports a lesser or restricted
+ * set of depths.  Resolve that here:
+ *    LVDS typically supports only 6bpc, so clamp down in that case
+ *    HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc
+ *    Displays may support a restricted set as well, check EDID and clamp as
+ *      appropriate.
+ *    DP may want to dither down to 6bpc to fit larger modes
+ *
+ * RETURNS:
+ * Dithering requirement (i.e. false if display bpc and pipe bpc match,
+ * true if they don't match).
+ */
+static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
+					 unsigned int *pipe_bpp,
+					 struct drm_display_mode *mode)
 {
-	printf("%s stub\n", __func__);
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	unsigned int display_bpc = UINT_MAX, bpc;
+
+	/* Walk the encoders & connectors on this crtc, get min bpc */
+	TAILQ_FOREACH(encoder, &dev->mode_config.encoder_list, head) {
+		struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+
+		if (encoder->crtc != crtc)
+			continue;
+
+		if (intel_encoder->type == INTEL_OUTPUT_LVDS) {
+			unsigned int lvds_bpc;
+
+			if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) ==
+			    LVDS_A3_POWER_UP)
+				lvds_bpc = 8;
+			else
+				lvds_bpc = 6;
+
+			if (lvds_bpc < display_bpc) {
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to LVDS (%d)\n", display_bpc, lvds_bpc);
+				display_bpc = lvds_bpc;
+			}
+			continue;
+		}
+
+		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+			/* Use VBT settings if we have an eDP panel */
+			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
+
+			if (edp_bpc < display_bpc) {
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+				display_bpc = edp_bpc;
+			}
+			continue;
+		}
+
+		/* Not one of the known troublemakers, check the EDID */
+		TAILQ_FOREACH(connector, &dev->mode_config.connector_list,
+				    head) {
+			if (connector->encoder != encoder)
+				continue;
+
+			/* Don't use an invalid EDID bpc value */
+			if (connector->display_info.bpc &&
+			    connector->display_info.bpc < display_bpc) {
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to EDID reported max of %d\n", display_bpc, connector->display_info.bpc);
+				display_bpc = connector->display_info.bpc;
+			}
+		}
+
+		/*
+		 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
+		 * through, clamp it down.  (Note: >12bpc will be caught below.)
+		 */
+		if (intel_encoder->type == INTEL_OUTPUT_HDMI) {
+			if (display_bpc > 8 && display_bpc < 12) {
+				DRM_DEBUG_KMS("forcing bpc to 12 for HDMI\n");
+				display_bpc = 12;
+			} else {
+				DRM_DEBUG_KMS("forcing bpc to 8 for HDMI\n");
+				display_bpc = 8;
+			}
+		}
+	}
+
+	if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
+		DRM_DEBUG_KMS("Dithering DP to 6bpc\n");
+		display_bpc = 6;
+	}
+
+	/*
+	 * We could just drive the pipe at the highest bpc all the time and
+	 * enable dithering as needed, but that costs bandwidth.  So choose
+	 * the minimum value that expresses the full color range of the fb but
+	 * also stays within the max display bpc discovered above.
+	 */
+
+	switch (crtc->fb->depth) {
+	case 8:
+		bpc = 8; /* since we go through a colormap */
+		break;
+	case 15:
+	case 16:
+		bpc = 6; /* min is 18bpp */
+		break;
+	case 24:
+		bpc = 8;
+		break;
+	case 30:
+		bpc = 10;
+		break;
+	case 48:
+		bpc = 12;
+		break;
+	default:
+		DRM_DEBUG("unsupported depth, assuming 24 bits\n");
+		bpc = min((unsigned int)8, display_bpc);
+		break;
+	}
+
+	display_bpc = min(display_bpc, bpc);
+
+	DRM_DEBUG_KMS("setting pipe bpc to %d (max display bpc %d)\n",
+			 bpc, display_bpc);
+
+	*pipe_bpp = display_bpc * 3;
+
+	return display_bpc != bpc;
 }
 
-static void intel_disable_pipe(struct inteldrm_softc *dev_priv,
-			       enum pipe pipe)
+static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
 {
-	printf("%s stub\n", __func__);
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	int refclk;
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	    intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
+		refclk = dev_priv->lvds_ssc_freq * 1000;
+		DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
+			      refclk / 1000);
+	} else if (!IS_GEN2(dev_priv)) {
+		refclk = 96000;
+	} else {
+		refclk = 48000;
+	}
+
+	return refclk;
 }
 
-static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
+static void i9xx_adjust_sdvo_tv_clock(struct drm_display_mode *adjusted_mode,
+				      intel_clock_t *clock)
 {
-	printf("%s stub\n", __func__);
+	/* SDVO TV has fixed PLL values depend on its clock range,
+	   this mirrors vbios setting. */
+	if (adjusted_mode->clock >= 100000
+	    && adjusted_mode->clock < 140500) {
+		clock->p1 = 2;
+		clock->p2 = 10;
+		clock->n = 3;
+		clock->m1 = 16;
+		clock->m2 = 8;
+	} else if (adjusted_mode->clock >= 140500
+		   && adjusted_mode->clock <= 200000) {
+		clock->p1 = 1;
+		clock->p2 = 10;
+		clock->n = 6;
+		clock->m1 = 12;
+		clock->m2 = 8;
+	}
 }
 
-static bool intel_crtc_mode_fixup(struct drm_crtc *crtc,
-				  struct drm_display_mode *mode,
-				  struct drm_display_mode *adjusted_mode)
+static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
+				     intel_clock_t *clock,
+				     intel_clock_t *reduced_clock)
 {
-	printf("%s stub\n", __func__);
-	return false;
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 fp, fp2 = 0;
+
+	if (IS_PINEVIEW(dev_priv)) {
+		fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
+		if (reduced_clock)
+			fp2 = (1 << reduced_clock->n) << 16 |
+				reduced_clock->m1 << 8 | reduced_clock->m2;
+	} else {
+		fp = clock->n << 16 | clock->m1 << 8 | clock->m2;
+		if (reduced_clock)
+			fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 |
+				reduced_clock->m2;
+	}
+
+	I915_WRITE(FP0(pipe), fp);
+
+	intel_crtc->lowfreq_avail = false;
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	    reduced_clock && i915_powersave) {
+		I915_WRITE(FP1(pipe), fp2);
+		intel_crtc->lowfreq_avail = true;
+	} else {
+		I915_WRITE(FP1(pipe), fp);
+	}
 }
 
-static int intel_crtc_mode_set(struct drm_crtc *crtc,
-			       struct drm_display_mode *mode,
-			       struct drm_display_mode *adjusted_mode,
-			       int x, int y,
-			       struct drm_framebuffer *old_fb)
+static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
+			      struct drm_display_mode *mode,
+			      struct drm_display_mode *adjusted_mode,
+			      int x, int y,
+			      struct drm_framebuffer *old_fb)
 {
-	printf("%s stub\n", __func__);
-	return EINVAL;
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	int refclk, num_connectors = 0;
+	intel_clock_t clock, reduced_clock;
+	u32 dpll, dspcntr, pipeconf, vsyncshift;
+	bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
+	bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_encoder *encoder;
+	struct intel_encoder *intel_encoder;
+	const intel_limit_t *limit;
+	int ret;
+	u32 temp;
+	u32 lvds_sync = 0;
+
+	TAILQ_FOREACH(encoder, &mode_config->encoder_list, head) {
+		intel_encoder = to_intel_encoder(encoder);
+		if (encoder->crtc != crtc)
+			continue;
+
+		switch (intel_encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_SDVO:
+		case INTEL_OUTPUT_HDMI:
+			is_sdvo = true;
+			if (intel_encoder->needs_tv_clock)
+				is_tv = true;
+			break;
+		case INTEL_OUTPUT_DVO:
+			is_dvo = true;
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			is_tv = true;
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			is_crt = true;
+			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			is_dp = true;
+			break;
+		}
+
+		num_connectors++;
+	}
+
+	refclk = i9xx_get_refclk(crtc, num_connectors);
+
+	/*
+	 * Returns a set of divisors for the desired target clock with the given
+	 * refclk, or false.  The returned values represent the clock equation:
+	 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+	 */
+	limit = intel_limit(crtc, refclk);
+	ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
+			     &clock);
+	if (!ok) {
+		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	/* Ensure that the cursor is valid for the new mode before changing... */
+	intel_crtc_update_cursor(crtc, true);
+
+	if (is_lvds && dev_priv->lvds_downclock_avail) {
+		/*
+		 * Ensure we match the reduced clock's P to the target clock.
+		 * If the clocks don't match, we can't switch the display clock
+		 * by using the FP0/FP1. In such case we will disable the LVDS
+		 * downclock feature.
+		*/
+		has_reduced_clock = limit->find_pll(limit, crtc,
+						    dev_priv->lvds_downclock,
+						    refclk,
+						    &clock,
+						    &reduced_clock);
+	}
+
+	if (is_sdvo && is_tv)
+		i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock);
+
+	i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ?
+				 &reduced_clock : NULL);
+
+	dpll = DPLL_VGA_MODE_DIS;
+
+	if (!IS_GEN2(dev_priv)) {
+		if (is_lvds)
+			dpll |= DPLLB_MODE_LVDS;
+		else
+			dpll |= DPLLB_MODE_DAC_SERIAL;
+		if (is_sdvo) {
+			int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+			if (pixel_multiplier > 1) {
+				if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) || IS_G33(dev_priv))
+					dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
+			}
+			dpll |= DPLL_DVO_HIGH_SPEED;
+		}
+		if (is_dp)
+			dpll |= DPLL_DVO_HIGH_SPEED;
+
+		/* compute bitmask from p1 value */
+		if (IS_PINEVIEW(dev_priv))
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
+		else {
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+			if (IS_G4X(dev_priv) && has_reduced_clock)
+				dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+		}
+		switch (clock.p2) {
+		case 5:
+			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+			break;
+		case 7:
+			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+			break;
+		case 10:
+			dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+			break;
+		case 14:
+			dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+			break;
+		}
+		if (INTEL_INFO(dev_priv)->gen >= 4)
+			dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
+	} else {
+		if (is_lvds) {
+			dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+		} else {
+			if (clock.p1 == 2)
+				dpll |= PLL_P1_DIVIDE_BY_TWO;
+			else
+				dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+			if (clock.p2 == 4)
+				dpll |= PLL_P2_DIVIDE_BY_4;
+		}
+	}
+
+	if (is_sdvo && is_tv)
+		dpll |= PLL_REF_INPUT_TVCLKINBC;
+	else if (is_tv)
+		/* XXX: just matching BIOS for now */
+		/*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
+		dpll |= 3;
+	else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+	else
+		dpll |= PLL_REF_INPUT_DREFCLK;
+
+	/* setup pipeconf */
+	pipeconf = I915_READ(PIPECONF(pipe));
+
+	/* Set up the display plane register */
+	dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+	if (pipe == 0)
+		dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
+	else
+		dspcntr |= DISPPLANE_SEL_PIPE_B;
+
+	if (pipe == 0 && INTEL_INFO(dev_priv)->gen < 4) {
+		/* Enable pixel doubling when the dot clock is > 90% of the (display)
+		 * core speed.
+		 *
+		 * XXX: No double-wide on 915GM pipe B. Is that the only reason for the
+		 * pipe == 0 check?
+		 */
+		if (mode->clock >
+		    dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
+			pipeconf |= PIPECONF_DOUBLE_WIDE;
+		else
+			pipeconf &= ~PIPECONF_DOUBLE_WIDE;
+	}
+
+	/* default to 8bpc */
+	pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
+	if (is_dp) {
+		if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
+			pipeconf |= PIPECONF_BPP_6 |
+				    PIPECONF_DITHER_EN |
+				    PIPECONF_DITHER_TYPE_SP;
+		}
+	}
+
+	dpll |= DPLL_VCO_ENABLE;
+
+	DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
+	drm_mode_debug_printmodeline(mode);
+
+	I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
+
+	POSTING_READ(DPLL(pipe));
+	DELAY(150);
+
+	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+	 * This is an exception to the general rule that mode_set doesn't turn
+	 * things on.
+	 */
+	if (is_lvds) {
+		temp = I915_READ(LVDS);
+		temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+		if (pipe == 1) {
+			temp |= LVDS_PIPEB_SELECT;
+		} else {
+			temp &= ~LVDS_PIPEB_SELECT;
+		}
+		/* set the corresponsding LVDS_BORDER bit */
+		temp |= dev_priv->lvds_border_bits;
+		/* Set the B0-B3 data pairs corresponding to whether we're going to
+		 * set the DPLLs for dual-channel mode or not.
+		 */
+		if (clock.p2 == 7)
+			temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+		else
+			temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+		/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+		 * appropriately here, but we need to look more thoroughly into how
+		 * panels behave in the two modes.
+		 */
+		/* set the dithering flag on LVDS as needed */
+		if (INTEL_INFO(dev_priv)->gen >= 4) {
+			if (dev_priv->lvds_dither)
+				temp |= LVDS_ENABLE_DITHER;
+			else
+				temp &= ~LVDS_ENABLE_DITHER;
+		}
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+			lvds_sync |= LVDS_HSYNC_POLARITY;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+			lvds_sync |= LVDS_VSYNC_POLARITY;
+		if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
+		    != lvds_sync) {
+			char flags[2] = "-+";
+			DRM_INFO("Changing LVDS panel from "
+				 "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
+				 flags[!(temp & LVDS_HSYNC_POLARITY)],
+				 flags[!(temp & LVDS_VSYNC_POLARITY)],
+				 flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
+				 flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
+			temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+			temp |= lvds_sync;
+		}
+		I915_WRITE(LVDS, temp);
+	}
+
+	if (is_dp) {
+		intel_dp_set_m_n(crtc, mode, adjusted_mode);
+	}
+
+	I915_WRITE(DPLL(pipe), dpll);
+
+	/* Wait for the clocks to stabilize. */
+	POSTING_READ(DPLL(pipe));
+	DELAY(150);
+
+	if (INTEL_INFO(dev_priv)->gen >= 4) {
+		temp = 0;
+		if (is_sdvo) {
+			temp = intel_mode_get_pixel_multiplier(adjusted_mode);
+			if (temp > 1)
+				temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
+			else
+				temp = 0;
+		}
+		I915_WRITE(DPLL_MD(pipe), temp);
+	} else {
+		/* The pixel multiplier can only be updated once the
+		 * DPLL is enabled and the clocks are stable.
+		 *
+		 * So write it again.
+		 */
+		I915_WRITE(DPLL(pipe), dpll);
+	}
+
+	if (HAS_PIPE_CXSR(dev_priv)) {
+		if (intel_crtc->lowfreq_avail) {
+			DRM_DEBUG_KMS("enabling CxSR downclocking\n");
+			pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
+		} else {
+			DRM_DEBUG_KMS("disabling CxSR downclocking\n");
+			pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+		}
+	}
+
+	pipeconf &= ~PIPECONF_INTERLACE_MASK;
+	if (!IS_GEN2(dev_priv) &&
+	    adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
+		/* the chip adds 2 halflines automatically */
+		adjusted_mode->crtc_vtotal -= 1;
+		adjusted_mode->crtc_vblank_end -= 1;
+		vsyncshift = adjusted_mode->crtc_hsync_start
+			     - adjusted_mode->crtc_htotal/2;
+	} else {
+		pipeconf |= PIPECONF_PROGRESSIVE;
+		vsyncshift = 0;
+	}
+
+	if (!IS_GEN3(dev_priv))
+		I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
+
+	I915_WRITE(HTOTAL(pipe),
+		   (adjusted_mode->crtc_hdisplay - 1) |
+		   ((adjusted_mode->crtc_htotal - 1) << 16));
+	I915_WRITE(HBLANK(pipe),
+		   (adjusted_mode->crtc_hblank_start - 1) |
+		   ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	I915_WRITE(HSYNC(pipe),
+		   (adjusted_mode->crtc_hsync_start - 1) |
+		   ((adjusted_mode->crtc_hsync_end - 1) << 16));
+
+	I915_WRITE(VTOTAL(pipe),
+		   (adjusted_mode->crtc_vdisplay - 1) |
+		   ((adjusted_mode->crtc_vtotal - 1) << 16));
+	I915_WRITE(VBLANK(pipe),
+		   (adjusted_mode->crtc_vblank_start - 1) |
+		   ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	I915_WRITE(VSYNC(pipe),
+		   (adjusted_mode->crtc_vsync_start - 1) |
+		   ((adjusted_mode->crtc_vsync_end - 1) << 16));
+
+	/* pipesrc and dspsize control the size that is scaled from,
+	 * which should always be the user's requested size.
+	 */
+	I915_WRITE(DSPSIZE(plane),
+		   ((mode->vdisplay - 1) << 16) |
+		   (mode->hdisplay - 1));
+	I915_WRITE(DSPPOS(plane), 0);
+	I915_WRITE(PIPESRC(pipe),
+		   ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+
+	I915_WRITE(PIPECONF(pipe), pipeconf);
+	POSTING_READ(PIPECONF(pipe));
+	intel_enable_pipe(dev_priv, pipe, false);
+
+	intel_wait_for_vblank(dev, pipe);
+
+	I915_WRITE(DSPCNTR(plane), dspcntr);
+	POSTING_READ(DSPCNTR(plane));
+	intel_enable_plane(dev_priv, plane, pipe);
+
+	ret = intel_pipe_set_base(crtc, x, y, old_fb);
+
+	intel_update_watermarks(dev);
+
+	return ret;
 }
 
-static int
-intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
-		    struct drm_framebuffer *old_fb)
+/*
+ * Initialize reference clocks when the driver loads
+ */
+void ironlake_init_pch_refclk(struct drm_device *dev)
 {
-	printf("%s stub\n", __func__);
-	return EINVAL;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_encoder *encoder;
+	struct intel_encoder *intel_encoder;
+	u32 temp;
+	bool has_lvds = false;
+	bool has_cpu_edp = false;
+	bool has_pch_edp = false;
+	bool has_panel = false;
+	bool has_ck505 = false;
+	bool can_ssc = false;
+
+	/* We need to take the global config into account */
+	TAILQ_FOREACH(encoder, &mode_config->encoder_list, head) {
+		intel_encoder = to_intel_encoder(encoder);
+		switch (intel_encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			has_panel = true;
+			has_lvds = true;
+			break;
+		case INTEL_OUTPUT_EDP:
+			has_panel = true;
+			if (intel_encoder_is_pch_edp(encoder))
+				has_pch_edp = true;
+			else
+				has_cpu_edp = true;
+			break;
+		}
+	}
+
+	if (HAS_PCH_IBX(dev_priv)) {
+		has_ck505 = dev_priv->display_clock_mode;
+		can_ssc = has_ck505;
+	} else {
+		has_ck505 = false;
+		can_ssc = true;
+	}
+
+	DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n",
+		      has_panel, has_lvds, has_pch_edp, has_cpu_edp,
+		      has_ck505);
+
+	/* Ironlake: try to setup display ref clock before DPLL
+	 * enabling. This is only under driver's control after
+	 * PCH B stepping, previous chipset stepping should be
+	 * ignoring this setting.
+	 */
+	temp = I915_READ(PCH_DREF_CONTROL);
+	/* Always enable nonspread source */
+	temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+
+	if (has_ck505)
+		temp |= DREF_NONSPREAD_CK505_ENABLE;
+	else
+		temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+
+	if (has_panel) {
+		temp &= ~DREF_SSC_SOURCE_MASK;
+		temp |= DREF_SSC_SOURCE_ENABLE;
+
+		/* SSC must be turned on before enabling the CPU output  */
+		if (intel_panel_use_ssc(dev_priv) && can_ssc) {
+			DRM_DEBUG_KMS("Using SSC on panel\n");
+			temp |= DREF_SSC1_ENABLE;
+		} else
+			temp &= ~DREF_SSC1_ENABLE;
+
+		/* Get SSC going before enabling the outputs */
+		I915_WRITE(PCH_DREF_CONTROL, temp);
+		POSTING_READ(PCH_DREF_CONTROL);
+		DELAY(200);
+
+		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+
+		/* Enable CPU source on CPU attached eDP */
+		if (has_cpu_edp) {
+			if (intel_panel_use_ssc(dev_priv) && can_ssc) {
+				DRM_DEBUG_KMS("Using SSC on eDP\n");
+				temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+			}
+			else
+				temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+		} else
+			temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+
+		I915_WRITE(PCH_DREF_CONTROL, temp);
+		POSTING_READ(PCH_DREF_CONTROL);
+		DELAY(200);
+	} else {
+		DRM_DEBUG_KMS("Disabling SSC entirely\n");
+
+		temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+
+		/* Turn off CPU output */
+		temp |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
+
+		I915_WRITE(PCH_DREF_CONTROL, temp);
+		POSTING_READ(PCH_DREF_CONTROL);
+		DELAY(200);
+
+		/* Turn off the SSC source */
+		temp &= ~DREF_SSC_SOURCE_MASK;
+		temp |= DREF_SSC_SOURCE_DISABLE;
+
+		/* Turn off SSC1 */
+		temp &= ~ DREF_SSC1_ENABLE;
+
+		I915_WRITE(PCH_DREF_CONTROL, temp);
+		POSTING_READ(PCH_DREF_CONTROL);
+		DELAY(200);
+	}
 }
 
-static int
-intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
-			   int x, int y, enum mode_set_atomic state)
+static int ironlake_get_refclk(struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
-	return EINVAL;
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_encoder *encoder;
+	struct intel_encoder *intel_encoder;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct intel_encoder *edp_encoder = NULL;
+	int num_connectors = 0;
+	bool is_lvds = false;
+
+	TAILQ_FOREACH(encoder, &mode_config->encoder_list, head) {
+		intel_encoder = to_intel_encoder(encoder);
+		if (encoder->crtc != crtc)
+			continue;
+
+		switch (intel_encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_EDP:
+			edp_encoder = intel_encoder;
+			break;
+		}
+		num_connectors++;
+	}
+
+	if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
+		DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
+			      dev_priv->lvds_ssc_freq);
+		return dev_priv->lvds_ssc_freq * 1000;
+	}
+
+	return 120000;
 }
 
-void intel_crtc_load_lut(struct drm_crtc *crtc)
+static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
+				  struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode,
+				  int x, int y,
+				  struct drm_framebuffer *old_fb)
 {
-	printf("%s stub\n", __func__);
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int plane = intel_crtc->plane;
+	int refclk, num_connectors = 0;
+	intel_clock_t clock, reduced_clock;
+	u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
+	bool ok, has_reduced_clock = false, is_sdvo = false;
+	bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
+	struct intel_encoder *has_edp_encoder = NULL;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_encoder *encoder;
+	struct intel_encoder *intel_encoder;
+	const intel_limit_t *limit;
+	int ret;
+	struct fdi_m_n m_n = {0};
+	u32 temp;
+	u32 lvds_sync = 0;
+	int target_clock, pixel_multiplier, lane, link_bw, factor;
+	unsigned int pipe_bpp;
+	bool dither;
+
+	TAILQ_FOREACH(encoder, &mode_config->encoder_list, head) {
+		intel_encoder = to_intel_encoder(encoder);
+		if (encoder->crtc != crtc)
+			continue;
+
+		switch (intel_encoder->type) {
+		case INTEL_OUTPUT_LVDS:
+			is_lvds = true;
+			break;
+		case INTEL_OUTPUT_SDVO:
+		case INTEL_OUTPUT_HDMI:
+			is_sdvo = true;
+			if (intel_encoder->needs_tv_clock)
+				is_tv = true;
+			break;
+		case INTEL_OUTPUT_TVOUT:
+			is_tv = true;
+			break;
+		case INTEL_OUTPUT_ANALOG:
+			is_crt = true;
+			break;
+		case INTEL_OUTPUT_DISPLAYPORT:
+			is_dp = true;
+			break;
+		case INTEL_OUTPUT_EDP:
+			has_edp_encoder = intel_encoder;
+			break;
+		}
+
+		num_connectors++;
+	}
+
+	refclk = ironlake_get_refclk(crtc);
+
+	/*
+	 * Returns a set of divisors for the desired target clock with the given
+	 * refclk, or false.  The returned values represent the clock equation:
+	 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
+	 */
+	limit = intel_limit(crtc, refclk);
+	ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
+			     &clock);
+	if (!ok) {
+		DRM_ERROR("Couldn't find PLL settings for mode!\n");
+		return -EINVAL;
+	}
+
+	/* Ensure that the cursor is valid for the new mode before changing... */
+	intel_crtc_update_cursor(crtc, true);
+
+	if (is_lvds && dev_priv->lvds_downclock_avail) {
+		/*
+		 * Ensure we match the reduced clock's P to the target clock.
+		 * If the clocks don't match, we can't switch the display clock
+		 * by using the FP0/FP1. In such case we will disable the LVDS
+		 * downclock feature.
+		*/
+		has_reduced_clock = limit->find_pll(limit, crtc,
+						    dev_priv->lvds_downclock,
+						    refclk,
+						    &clock,
+						    &reduced_clock);
+	}
+	/* SDVO TV has fixed PLL values depend on its clock range,
+	   this mirrors vbios setting. */
+	if (is_sdvo && is_tv) {
+		if (adjusted_mode->clock >= 100000
+		    && adjusted_mode->clock < 140500) {
+			clock.p1 = 2;
+			clock.p2 = 10;
+			clock.n = 3;
+			clock.m1 = 16;
+			clock.m2 = 8;
+		} else if (adjusted_mode->clock >= 140500
+			   && adjusted_mode->clock <= 200000) {
+			clock.p1 = 1;
+			clock.p2 = 10;
+			clock.n = 6;
+			clock.m1 = 12;
+			clock.m2 = 8;
+		}
+	}
+
+	/* FDI link */
+	pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+	lane = 0;
+	/* CPU eDP doesn't require FDI link, so just set DP M/N
+	   according to current link config */
+	if (has_edp_encoder &&
+	    !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+		target_clock = mode->clock;
+		intel_edp_link_config(has_edp_encoder,
+				      &lane, &link_bw);
+	} else {
+		/* [e]DP over FDI requires target mode clock
+		   instead of link clock */
+		if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
+			target_clock = mode->clock;
+		else
+			target_clock = adjusted_mode->clock;
+
+		/* FDI is a binary signal running at ~2.7GHz, encoding
+		 * each output octet as 10 bits. The actual frequency
+		 * is stored as a divider into a 100MHz clock, and the
+		 * mode pixel clock is stored in units of 1KHz.
+		 * Hence the bw of each lane in terms of the mode signal
+		 * is:
+		 */
+		link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+	}
+
+	/* determine panel color depth */
+	temp = I915_READ(PIPECONF(pipe));
+	temp &= ~PIPE_BPC_MASK;
+	dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode);
+	switch (pipe_bpp) {
+	case 18:
+		temp |= PIPE_6BPC;
+		break;
+	case 24:
+		temp |= PIPE_8BPC;
+		break;
+	case 30:
+		temp |= PIPE_10BPC;
+		break;
+	case 36:
+		temp |= PIPE_12BPC;
+		break;
+	default:
+		printf("intel_choose_pipe_bpp returned invalid value %d\n",
+			pipe_bpp);
+		temp |= PIPE_8BPC;
+		pipe_bpp = 24;
+		break;
+	}
+
+	intel_crtc->bpp = pipe_bpp;
+	I915_WRITE(PIPECONF(pipe), temp);
+
+	if (!lane) {
+		/*
+		 * Account for spread spectrum to avoid
+		 * oversubscribing the link. Max center spread
+		 * is 2.5%; use 5% for safety's sake.
+		 */
+		u32 bps = target_clock * intel_crtc->bpp * 21 / 20;
+		lane = bps / (link_bw * 8) + 1;
+	}
+
+	intel_crtc->fdi_lanes = lane;
+
+	if (pixel_multiplier > 1)
+		link_bw *= pixel_multiplier;
+	ironlake_compute_m_n(intel_crtc->bpp, lane, target_clock, link_bw,
+			     &m_n);
+
+	fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
+	if (has_reduced_clock)
+		fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
+			reduced_clock.m2;
+
+	/* Enable autotuning of the PLL clock (if permissible) */
+	factor = 21;
+	if (is_lvds) {
+		if ((intel_panel_use_ssc(dev_priv) &&
+		     dev_priv->lvds_ssc_freq == 100) ||
+		    (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
+			factor = 25;
+	} else if (is_sdvo && is_tv)
+		factor = 20;
+
+	if (clock.m < factor * clock.n)
+		fp |= FP_CB_TUNE;
+
+	dpll = 0;
+
+	if (is_lvds)
+		dpll |= DPLLB_MODE_LVDS;
+	else
+		dpll |= DPLLB_MODE_DAC_SERIAL;
+	if (is_sdvo) {
+		int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+		if (pixel_multiplier > 1) {
+			dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
+		}
+		dpll |= DPLL_DVO_HIGH_SPEED;
+	}
+	if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
+		dpll |= DPLL_DVO_HIGH_SPEED;
+
+	/* compute bitmask from p1 value */
+	dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
+	/* also FPA1 */
+	dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+
+	switch (clock.p2) {
+	case 5:
+		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
+		break;
+	case 7:
+		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
+		break;
+	case 10:
+		dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
+		break;
+	case 14:
+		dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
+		break;
+	}
+
+	if (is_sdvo && is_tv)
+		dpll |= PLL_REF_INPUT_TVCLKINBC;
+	else if (is_tv)
+		/* XXX: just matching BIOS for now */
+		/*	dpll |= PLL_REF_INPUT_TVCLKINBC; */
+		dpll |= 3;
+	else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2)
+		dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
+	else
+		dpll |= PLL_REF_INPUT_DREFCLK;
+
+	/* setup pipeconf */
+	pipeconf = I915_READ(PIPECONF(pipe));
+
+	/* Set up the display plane register */
+	dspcntr = DISPPLANE_GAMMA_ENABLE;
+
+	DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
+	drm_mode_debug_printmodeline(mode);
+
+	/* PCH eDP needs FDI, but CPU eDP does not */
+	if (!intel_crtc->no_pll) {
+		if (!has_edp_encoder ||
+		    intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+			I915_WRITE(PCH_FP0(pipe), fp);
+			I915_WRITE(PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
+
+			POSTING_READ(PCH_DPLL(pipe));
+			DELAY(150);
+		}
+	} else {
+		if (dpll == (I915_READ(PCH_DPLL(0)) & 0x7fffffff) &&
+		    fp == I915_READ(PCH_FP0(0))) {
+			intel_crtc->use_pll_a = true;
+			DRM_DEBUG_KMS("using pipe a dpll\n");
+		} else if (dpll == (I915_READ(PCH_DPLL(1)) & 0x7fffffff) &&
+			   fp == I915_READ(PCH_FP0(1))) {
+			intel_crtc->use_pll_a = false;
+			DRM_DEBUG_KMS("using pipe b dpll\n");
+		} else {
+			DRM_DEBUG_KMS("no matching PLL configuration for pipe 2\n");
+			return -EINVAL;
+		}
+	}
+
+	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
+	 * This is an exception to the general rule that mode_set doesn't turn
+	 * things on.
+	 */
+	if (is_lvds) {
+		temp = I915_READ(PCH_LVDS);
+		temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
+		if (HAS_PCH_CPT(dev_priv)) {
+			temp &= ~PORT_TRANS_SEL_MASK;
+			temp |= PORT_TRANS_SEL_CPT(pipe);
+		} else {
+			if (pipe == 1)
+				temp |= LVDS_PIPEB_SELECT;
+			else
+				temp &= ~LVDS_PIPEB_SELECT;
+		}
+
+		/* set the corresponsding LVDS_BORDER bit */
+		temp |= dev_priv->lvds_border_bits;
+		/* Set the B0-B3 data pairs corresponding to whether we're going to
+		 * set the DPLLs for dual-channel mode or not.
+		 */
+		if (clock.p2 == 7)
+			temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
+		else
+			temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP);
+
+		/* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP)
+		 * appropriately here, but we need to look more thoroughly into how
+		 * panels behave in the two modes.
+		 */
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
+			lvds_sync |= LVDS_HSYNC_POLARITY;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
+			lvds_sync |= LVDS_VSYNC_POLARITY;
+		if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY))
+		    != lvds_sync) {
+			char flags[2] = "-+";
+			DRM_INFO("Changing LVDS panel from "
+				 "(%chsync, %cvsync) to (%chsync, %cvsync)\n",
+				 flags[!(temp & LVDS_HSYNC_POLARITY)],
+				 flags[!(temp & LVDS_VSYNC_POLARITY)],
+				 flags[!(lvds_sync & LVDS_HSYNC_POLARITY)],
+				 flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]);
+			temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
+			temp |= lvds_sync;
+		}
+		I915_WRITE(PCH_LVDS, temp);
+	}
+
+	pipeconf &= ~PIPECONF_DITHER_EN;
+	pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
+	if ((is_lvds && dev_priv->lvds_dither) || dither) {
+		pipeconf |= PIPECONF_DITHER_EN;
+		pipeconf |= PIPECONF_DITHER_TYPE_SP;
+	}
+	if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+		intel_dp_set_m_n(crtc, mode, adjusted_mode);
+	} else {
+		/* For non-DP output, clear any trans DP clock recovery setting.*/
+		I915_WRITE(TRANSDATA_M1(pipe), 0);
+		I915_WRITE(TRANSDATA_N1(pipe), 0);
+		I915_WRITE(TRANSDPLINK_M1(pipe), 0);
+		I915_WRITE(TRANSDPLINK_N1(pipe), 0);
+	}
+
+	if (!intel_crtc->no_pll &&
+	    (!has_edp_encoder ||
+	     intel_encoder_is_pch_edp(&has_edp_encoder->base))) {
+		I915_WRITE(PCH_DPLL(pipe), dpll);
+
+		/* Wait for the clocks to stabilize. */
+		POSTING_READ(PCH_DPLL(pipe));
+		DELAY(150);
+
+		/* The pixel multiplier can only be updated once the
+		 * DPLL is enabled and the clocks are stable.
+		 *
+		 * So write it again.
+		 */
+		I915_WRITE(PCH_DPLL(pipe), dpll);
+	}
+
+	intel_crtc->lowfreq_avail = false;
+	if (!intel_crtc->no_pll) {
+		if (is_lvds && has_reduced_clock && i915_powersave) {
+			I915_WRITE(PCH_FP1(pipe), fp2);
+			intel_crtc->lowfreq_avail = true;
+			if (HAS_PIPE_CXSR(dev_priv)) {
+				DRM_DEBUG_KMS("enabling CxSR downclocking\n");
+				pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
+			}
+		} else {
+			I915_WRITE(PCH_FP1(pipe), fp);
+			if (HAS_PIPE_CXSR(dev_priv)) {
+				DRM_DEBUG_KMS("disabling CxSR downclocking\n");
+				pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
+			}
+		}
+	}
+
+	pipeconf &= ~PIPECONF_INTERLACE_MASK;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
+		pipeconf |= PIPECONF_INTERLACED_ILK;
+		/* the chip adds 2 halflines automatically */
+		adjusted_mode->crtc_vtotal -= 1;
+		adjusted_mode->crtc_vblank_end -= 1;
+		I915_WRITE(VSYNCSHIFT(pipe),
+			   adjusted_mode->crtc_hsync_start
+			   - adjusted_mode->crtc_htotal/2);
+	} else {
+		pipeconf |= PIPECONF_PROGRESSIVE;
+		I915_WRITE(VSYNCSHIFT(pipe), 0);
+	}
+
+	I915_WRITE(HTOTAL(pipe),
+		   (adjusted_mode->crtc_hdisplay - 1) |
+		   ((adjusted_mode->crtc_htotal - 1) << 16));
+	I915_WRITE(HBLANK(pipe),
+		   (adjusted_mode->crtc_hblank_start - 1) |
+		   ((adjusted_mode->crtc_hblank_end - 1) << 16));
+	I915_WRITE(HSYNC(pipe),
+		   (adjusted_mode->crtc_hsync_start - 1) |
+		   ((adjusted_mode->crtc_hsync_end - 1) << 16));
+
+	I915_WRITE(VTOTAL(pipe),
+		   (adjusted_mode->crtc_vdisplay - 1) |
+		   ((adjusted_mode->crtc_vtotal - 1) << 16));
+	I915_WRITE(VBLANK(pipe),
+		   (adjusted_mode->crtc_vblank_start - 1) |
+		   ((adjusted_mode->crtc_vblank_end - 1) << 16));
+	I915_WRITE(VSYNC(pipe),
+		   (adjusted_mode->crtc_vsync_start - 1) |
+		   ((adjusted_mode->crtc_vsync_end - 1) << 16));
+
+	/* pipesrc controls the size that is scaled from, which should
+	 * always be the user's requested size.
+	 */
+	I915_WRITE(PIPESRC(pipe),
+		   ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
+
+	I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
+	I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
+	I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
+	I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
+
+	if (has_edp_encoder &&
+	    !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+		ironlake_set_pll_edp(crtc, adjusted_mode->clock);
+	}
+
+	I915_WRITE(PIPECONF(pipe), pipeconf);
+	POSTING_READ(PIPECONF(pipe));
+
+	intel_wait_for_vblank(dev, pipe);
+
+	I915_WRITE(DSPCNTR(plane), dspcntr);
+	POSTING_READ(DSPCNTR(plane));
+
+	ret = intel_pipe_set_base(crtc, x, y, old_fb);
+
+	intel_update_watermarks(dev);
+
+	return ret;
 }
 
-static void intel_crtc_disable(struct drm_crtc *crtc)
+static int intel_crtc_mode_set(struct drm_crtc *crtc,
+			       struct drm_display_mode *mode,
+			       struct drm_display_mode *adjusted_mode,
+			       int x, int y,
+			       struct drm_framebuffer *old_fb)
 {
-	printf("%s stub\n", __func__);
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int ret;
+
+	drm_vblank_pre_modeset(dev, pipe);
+
+	ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode,
+					      x, y, old_fb);
+	drm_vblank_post_modeset(dev, pipe);
+
+	if (ret)
+		intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
+	else
+		intel_crtc->dpms_mode = DRM_MODE_DPMS_ON;
+
+	return ret;
 }
 
-static int intel_crtc_cursor_set(struct drm_crtc *crtc,
-				 struct drm_file *file,
-				 uint32_t handle,
-				 uint32_t width, uint32_t height)
+static bool intel_eld_uptodate(struct drm_connector *connector,
+			       int reg_eldv, uint32_t bits_eldv,
+			       int reg_elda, uint32_t bits_elda,
+			       int reg_edid)
 {
-	printf("%s stub\n", __func__);
-	return EINVAL;
+	struct inteldrm_softc *dev_priv = connector->dev->dev_private;
+	uint8_t *eld = connector->eld;
+	uint32_t i;
+
+	i = I915_READ(reg_eldv);
+	i &= bits_eldv;
+
+	if (!eld[0])
+		return !i;
+
+	if (!i)
+		return false;
+
+	i = I915_READ(reg_elda);
+	i &= ~bits_elda;
+	I915_WRITE(reg_elda, i);
+
+	for (i = 0; i < eld[2]; i++)
+		if (I915_READ(reg_edid) != *((uint32_t *)eld + i))
+			return false;
+
+	return true;
 }
 
-static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
+static void g4x_write_eld(struct drm_connector *connector,
+			  struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
-	return EINVAL;
+	struct inteldrm_softc *dev_priv = connector->dev->dev_private;
+	uint8_t *eld = connector->eld;
+	uint32_t eldv;
+	uint32_t len;
+	uint32_t i;
+
+	i = I915_READ(G4X_AUD_VID_DID);
+
+	if (i == INTEL_AUDIO_DEVBLC || i == INTEL_AUDIO_DEVCL)
+		eldv = G4X_ELDV_DEVCL_DEVBLC;
+	else
+		eldv = G4X_ELDV_DEVCTG;
+
+	if (intel_eld_uptodate(connector,
+			       G4X_AUD_CNTL_ST, eldv,
+			       G4X_AUD_CNTL_ST, G4X_ELD_ADDR,
+			       G4X_HDMIW_HDMIEDID))
+		return;
+
+	i = I915_READ(G4X_AUD_CNTL_ST);
+	i &= ~(eldv | G4X_ELD_ADDR);
+	len = (i >> 9) & 0x1f;		/* ELD buffer size */
+	I915_WRITE(G4X_AUD_CNTL_ST, i);
+
+	if (!eld[0])
+		return;
+
+	if (eld[2] < (uint8_t)len)
+		len = eld[2];
+	DRM_DEBUG_KMS("ELD size %d\n", len);
+	for (i = 0; i < len; i++)
+		I915_WRITE(G4X_HDMIW_HDMIEDID, *((uint32_t *)eld + i));
+
+	i = I915_READ(G4X_AUD_CNTL_ST);
+	i |= eldv;
+	I915_WRITE(G4X_AUD_CNTL_ST, i);
 }
 
-static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
-				 u16 *blue, uint32_t start, uint32_t size)
+static void ironlake_write_eld(struct drm_connector *connector,
+				     struct drm_crtc *crtc)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = connector->dev->dev_private;
+	uint8_t *eld = connector->eld;
+	uint32_t eldv;
+	uint32_t i;
+	int len;
+	int hdmiw_hdmiedid;
+	int aud_config;
+	int aud_cntl_st;
+	int aud_cntrl_st2;
+
+	if (HAS_PCH_IBX(dev_priv)) {
+		hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A;
+		aud_config = IBX_AUD_CONFIG_A;
+		aud_cntl_st = IBX_AUD_CNTL_ST_A;
+		aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
+	} else {
+		hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A;
+		aud_config = CPT_AUD_CONFIG_A;
+		aud_cntl_st = CPT_AUD_CNTL_ST_A;
+		aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
+	}
+
+	i = to_intel_crtc(crtc)->pipe;
+	hdmiw_hdmiedid += i * 0x100;
+	aud_cntl_st += i * 0x100;
+	aud_config += i * 0x100;
+
+	DRM_DEBUG_KMS("ELD on pipe %c\n", pipe_name(i));
+
+	i = I915_READ(aud_cntl_st);
+	i = (i >> 29) & 0x3;		/* DIP_Port_Select, 0x1 = PortB */
+	if (!i) {
+		DRM_DEBUG_KMS("Audio directed to unknown port\n");
+		/* operate blindly on all ports */
+		eldv = IBX_ELD_VALIDB;
+		eldv |= IBX_ELD_VALIDB << 4;
+		eldv |= IBX_ELD_VALIDB << 8;
+	} else {
+		DRM_DEBUG_KMS("ELD on port %c\n", 'A' + i);
+		eldv = IBX_ELD_VALIDB << ((i - 1) * 4);
+	}
+
+	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+		DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
+		eld[5] |= (1 << 2);	/* Conn_Type, 0x1 = DisplayPort */
+		I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
+	} else
+		I915_WRITE(aud_config, 0);
+
+	if (intel_eld_uptodate(connector,
+			       aud_cntrl_st2, eldv,
+			       aud_cntl_st, IBX_ELD_ADDRESS,
+			       hdmiw_hdmiedid))
+		return;
+
+	i = I915_READ(aud_cntrl_st2);
+	i &= ~eldv;
+	I915_WRITE(aud_cntrl_st2, i);
+
+	if (!eld[0])
+		return;
+
+	i = I915_READ(aud_cntl_st);
+	i &= ~IBX_ELD_ADDRESS;
+	I915_WRITE(aud_cntl_st, i);
+
+	/* 84 bytes of hw ELD buffer */
+	len = 21;
+	if (eld[2] < (uint8_t)len)
+		len = eld[2];
+	DRM_DEBUG_KMS("ELD size %d\n", len);
+	for (i = 0; i < len; i++)
+		I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
+
+	i = I915_READ(aud_cntrl_st2);
+	i |= eldv;
+	I915_WRITE(aud_cntrl_st2, i);
 }
 
 void intel_write_eld(struct drm_encoder *encoder,
@@ -855,26 +6470,395 @@ void intel_write_eld(struct drm_encoder *encoder,
 		dev_priv->display.write_eld(connector, crtc);
 }
 
+/** Loads the palette/gamma unit for the CRTC with the prepared values */
+void intel_crtc_load_lut(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int palreg = PALETTE(intel_crtc->pipe);
+	int i;
+
+	/* The clocks have to be on to load the palette. */
+	if (!crtc->enabled || !intel_crtc->active)
+		return;
+
+	/* use legacy palette for Ironlake */
+	if (HAS_PCH_SPLIT(dev_priv))
+		palreg = LGC_PALETTE(intel_crtc->pipe);
+
+	for (i = 0; i < 256; i++) {
+		I915_WRITE(palreg + 4 * i,
+			   (intel_crtc->lut_r[i] << 16) |
+			   (intel_crtc->lut_g[i] << 8) |
+			   intel_crtc->lut_b[i]);
+	}
+}
+
+static void i845_update_cursor(struct drm_crtc *crtc, u32 base)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	bool visible = base != 0;
+	u32 cntl;
+
+	if (intel_crtc->cursor_visible == visible)
+		return;
+
+	cntl = I915_READ(_CURACNTR);
+	if (visible) {
+		/* On these chipsets we can only modify the base whilst
+		 * the cursor is disabled.
+		 */
+		I915_WRITE(_CURABASE, base);
+
+		cntl &= ~(CURSOR_FORMAT_MASK);
+		/* XXX width must be 64, stride 256 => 0x00 << 28 */
+		cntl |= CURSOR_ENABLE |
+			CURSOR_GAMMA_ENABLE |
+			CURSOR_FORMAT_ARGB;
+	} else
+		cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
+	I915_WRITE(_CURACNTR, cntl);
+
+	intel_crtc->cursor_visible = visible;
+}
+
+static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	bool visible = base != 0;
+
+	if (intel_crtc->cursor_visible != visible) {
+		uint32_t cntl = I915_READ(CURCNTR(pipe));
+		if (base) {
+			cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
+			cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+			cntl |= pipe << 28; /* Connect to correct pipe */
+		} else {
+			cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+			cntl |= CURSOR_MODE_DISABLE;
+		}
+		I915_WRITE(CURCNTR(pipe), cntl);
+
+		intel_crtc->cursor_visible = visible;
+	}
+	/* and commit changes on next vblank */
+	I915_WRITE(CURBASE(pipe), base);
+}
+
+static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	bool visible = base != 0;
+
+	if (intel_crtc->cursor_visible != visible) {
+		uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
+		if (base) {
+			cntl &= ~CURSOR_MODE;
+			cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+		} else {
+			cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+			cntl |= CURSOR_MODE_DISABLE;
+		}
+		I915_WRITE(CURCNTR_IVB(pipe), cntl);
+
+		intel_crtc->cursor_visible = visible;
+	}
+	/* and commit changes on next vblank */
+	I915_WRITE(CURBASE_IVB(pipe), base);
+}
+
+/* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
+static void intel_crtc_update_cursor(struct drm_crtc *crtc,
+				     bool on)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int x = intel_crtc->cursor_x;
+	int y = intel_crtc->cursor_y;
+	u32 base, pos;
+	bool visible;
+
+	pos = 0;
+
+	if (on && crtc->enabled && crtc->fb) {
+		base = intel_crtc->cursor_addr;
+		if (x > (int) crtc->fb->width)
+			base = 0;
+
+		if (y > (int) crtc->fb->height)
+			base = 0;
+	} else
+		base = 0;
+
+	if (x < 0) {
+		if (x + intel_crtc->cursor_width < 0)
+			base = 0;
+
+		pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
+		x = -x;
+	}
+	pos |= x << CURSOR_X_SHIFT;
+
+	if (y < 0) {
+		if (y + intel_crtc->cursor_height < 0)
+			base = 0;
+
+		pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
+		y = -y;
+	}
+	pos |= y << CURSOR_Y_SHIFT;
+
+	visible = base != 0;
+	if (!visible && !intel_crtc->cursor_visible)
+		return;
+
+	if (IS_IVYBRIDGE(dev_priv)) {
+		I915_WRITE(CURPOS_IVB(pipe), pos);
+		ivb_update_cursor(crtc, base);
+	} else {
+		I915_WRITE(CURPOS(pipe), pos);
+		if (IS_845G(dev_priv) || IS_I865G(dev_priv))
+			i845_update_cursor(crtc, base);
+		else
+			i9xx_update_cursor(crtc, base);
+	}
+
+	if (visible)
+		intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj);
+}
+
+static int intel_crtc_cursor_set(struct drm_crtc *crtc,
+				 struct drm_file *file,
+				 uint32_t handle,
+				 uint32_t width, uint32_t height)
+{
+	printf("%s stub\n", __func__);
+	return EINVAL;
+#if 0
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_i915_gem_object *obj;
+	uint32_t addr;
+	int ret;
+
+	DRM_DEBUG_KMS("\n");
+
+	/* if we want to turn off the cursor ignore width and height */
+	if (!handle) {
+		DRM_DEBUG_KMS("cursor off\n");
+		addr = 0;
+		obj = NULL;
+		DRM_LOCK();
+		goto finish;
+	}
+
+	/* Currently we only support 64x64 cursors */
+	if (width != 64 || height != 64) {
+		DRM_ERROR("we currently only support 64x64 cursors\n");
+		return -EINVAL;
+	}
+
+	obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle));
+	if (&obj->base == NULL)
+		return -ENOENT;
+
+	if (obj->base.size < width * height * 4) {
+		DRM_ERROR("buffer is to small\n");
+		ret = -ENOMEM;
+		goto fail;
+	}
+
+	/* we only need to pin inside GTT if cursor is non-phy */
+	DRM_LOCK();
+	if (!dev_priv->info->cursor_needs_physical) {
+		if (obj->tiling_mode) {
+			DRM_ERROR("cursor cannot be tiled\n");
+			ret = -EINVAL;
+			goto fail_locked;
+		}
+
+		ret = i915_gem_object_pin_to_display_plane(obj, 0, NULL);
+		if (ret) {
+			DRM_ERROR("failed to move cursor bo into the GTT\n");
+			goto fail_locked;
+		}
+
+		ret = i915_gem_object_put_fence(obj);
+		if (ret) {
+			DRM_ERROR("failed to release fence for cursor\n");
+			goto fail_unpin;
+		}
+
+		addr = obj->gtt_offset;
+	} else {
+		int align = IS_I830(dev) ? 16 * 1024 : 256;
+		ret = i915_gem_attach_phys_object(dev, obj,
+						  (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1,
+						  align);
+		if (ret) {
+			DRM_ERROR("failed to attach phys object\n");
+			goto fail_locked;
+		}
+		addr = obj->phys_obj->handle->busaddr;
+	}
+
+	if (IS_GEN2(dev_priv))
+		I915_WRITE(CURSIZE, (height << 12) | width);
+
+ finish:
+	if (intel_crtc->cursor_bo) {
+		if (dev_priv->info->cursor_needs_physical) {
+			if (intel_crtc->cursor_bo != obj)
+				i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo);
+		} else
+			i915_gem_object_unpin(intel_crtc->cursor_bo);
+		drm_gem_object_unreference(&intel_crtc->cursor_bo->base);
+	}
+
+	DRM_UNLOCK();
+
+	intel_crtc->cursor_addr = addr;
+	intel_crtc->cursor_bo = obj;
+	intel_crtc->cursor_width = width;
+	intel_crtc->cursor_height = height;
+
+	intel_crtc_update_cursor(crtc, true);
+
+	return 0;
+fail_unpin:
+	i915_gem_object_unpin(obj);
+fail_locked:
+	DRM_UNLOCK();
+fail:
+	drm_gem_object_unreference_unlocked(&obj->base);
+	return ret;
+#endif
+}
+
+static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	intel_crtc->cursor_x = x;
+	intel_crtc->cursor_y = y;
+
+	intel_crtc_update_cursor(crtc, true);
+
+	return 0;
+}
+
+/** Sets the color ramps on behalf of RandR */
+void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
+				 u16 blue, int regno)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	intel_crtc->lut_r[regno] = red >> 8;
+	intel_crtc->lut_g[regno] = green >> 8;
+	intel_crtc->lut_b[regno] = blue >> 8;
+}
+
+void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+			     u16 *blue, int regno)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	*red = intel_crtc->lut_r[regno] << 8;
+	*green = intel_crtc->lut_g[regno] << 8;
+	*blue = intel_crtc->lut_b[regno] << 8;
+}
+
+static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
+				 u16 *blue, uint32_t start, uint32_t size)
+{
+	int end = (start + size > 256) ? 256 : start + size, i;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	for (i = start; i < end; i++) {
+		intel_crtc->lut_r[i] = red[i] >> 8;
+		intel_crtc->lut_g[i] = green[i] >> 8;
+		intel_crtc->lut_b[i] = blue[i] >> 8;
+	}
+
+	intel_crtc_load_lut(crtc);
+}
+
 /**
  * Get a pipe with a simple mode set on it for doing load-based monitor
  * detection.
  *
  * It will be up to the load-detect code to adjust the pipe as appropriate for
  * its requirements.  The pipe will be connected to no other encoders.
- * 
+ *
  * Currently this code will only succeed if there is a pipe with no encoders
  * configured for it.  In the future, it could choose to temporarily disable
  * some outputs to free up a pipe for its use.
- * 
+ *
  * \return crtc, or NULL if no pipes are available.
  */
 
 /* VESA 640x480x72Hz mode to set on the pipe */
 static struct drm_display_mode load_detect_mode = {
 	DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
-		704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
+		 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
 };
 
+#ifdef notyet
+static int
+intel_framebuffer_create(struct drm_device *dev,
+    struct drm_mode_fb_cmd2 *mode_cmd, struct drm_i915_gem_object *obj,
+     struct drm_framebuffer **res)
+{
+	struct intel_framebuffer *intel_fb;
+	int ret;
+
+	intel_fb = malloc(sizeof(*intel_fb), M_DRM, M_WAITOK | M_ZERO);
+	ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj);
+	if (ret) {
+		drm_gem_object_unreference_unlocked(&obj->base);
+		free(intel_fb, M_DRM);
+		return (ret);
+	}
+
+	*res = &intel_fb->base;
+	return (0);
+}
+#endif
+
+#ifndef roundup2
+#define roundup2(x, y)  (((x)+((y)-1))&(~((y)-1))) /* if y is powers of two */
+#endif
+
+#ifdef notyet
+static u32
+intel_framebuffer_pitch_for_width(int width, int bpp)
+{
+	u32 pitch = howmany(width * bpp, 8);
+	return roundup2(pitch, 64);
+}
+#endif
+
+#ifdef notyet
+static u32
+intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp)
+{
+	u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp);
+	return roundup2(pitch * mode->vdisplay, PAGE_SIZE);
+}
+#endif
+
 static int
 intel_framebuffer_create_for_mode(struct drm_device *dev,
     struct drm_display_mode *mode, int depth, int bpp,
@@ -882,6 +6866,23 @@ intel_framebuffer_create_for_mode(struct drm_device *dev,
 {
 	printf("%s stub\n", __func__);
 	return EINVAL;
+#ifdef notyet
+	struct drm_i915_gem_object *obj;
+	struct drm_mode_fb_cmd2 mode_cmd;
+
+	obj = i915_gem_alloc_object(dev,
+				    intel_framebuffer_size_for_mode(mode, bpp));
+	if (obj == NULL)
+		return (-ENOMEM);
+
+	mode_cmd.width = mode->hdisplay;
+	mode_cmd.height = mode->vdisplay;
+	mode_cmd.pitches[0] = intel_framebuffer_pitch_for_width(mode_cmd.width,
+								bpp);
+	mode_cmd.pixel_format = drm_mode_legacy_fb_format(bpp, depth);
+
+	return (intel_framebuffer_create(dev, &mode_cmd, obj, res));
+#endif
 }
 
 static int
@@ -889,9 +6890,8 @@ mode_fits_in_fbdev(struct drm_device *dev,
     struct drm_display_mode *mode, struct drm_framebuffer **res)
 {
 	printf("%s stub\n", __func__);
-	*res = NULL;
-	return (0);
-#if 0
+	return 0;
+#ifdef notyet
 	struct inteldrm_softc *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj;
 	struct drm_framebuffer *fb;
@@ -1190,116 +7190,578 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
 	return mode;
 }
 
-static void intel_crtc_destroy(struct drm_crtc *crtc)
+#define GPU_IDLE_TIMEOUT (500 /* ms */ * 1000 / hz)
+
+#ifdef notyet
+/* When this timer fires, we've been idle for awhile */
+static void intel_gpu_idle_timer(void *arg)
+{
+	struct drm_device *dev = arg;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	if (!TAILQ_EMPTY(&dev_priv->mm.active_list)) {
+		/* Still processing requests, so just re-arm the timer. */
+#ifdef notyet
+		callout_schedule(&dev_priv->idle_callout, GPU_IDLE_TIMEOUT);
+#else
+		printf("%s todo re-arm timeout\n", __func__);
+#endif
+		return;
+	}
+
+	dev_priv->busy = false;
+#ifdef notyet
+	taskqueue_enqueue(dev_priv->tq, &dev_priv->idle_task);
+#else
+	printf("%s todo enqueue task\n", __func__);
+#endif
+}
+#endif
+
+#define CRTC_IDLE_TIMEOUT (1000 /* ms */ * 1000 / hz)
+
+#ifdef notyet
+static void intel_crtc_idle_timer(void *arg)
 {
 	printf("%s stub\n", __func__);
+#ifdef notyet
+	struct intel_crtc *intel_crtc = arg;
+	struct drm_crtc *crtc = &intel_crtc->base;
+	struct inteldrm_softc *dev_priv = crtc->dev->dev_private;
+	struct intel_framebuffer *intel_fb;
+
+	intel_fb = to_intel_framebuffer(crtc->fb);
+	if (intel_fb && intel_fb->obj->active) {
+		/* The framebuffer is still being accessed by the GPU. */
+		callout_schedule(&intel_crtc->idle_callout, CRTC_IDLE_TIMEOUT);
+		return;
+	}
+
+	intel_crtc->busy = false;
+	taskqueue_enqueue(dev_priv->tq, &dev_priv->idle_task);
+#endif
 }
+#endif
 
-void intel_cpt_verify_modeset(struct drm_device *dev, int pipe)
+static void intel_increase_pllclock(struct drm_crtc *crtc)
 {
+	struct drm_device *dev = crtc->dev;
 	struct inteldrm_softc *dev_priv = dev->dev_private;
-	int dslreg = PIPEDSL(pipe), tc2reg = TRANS_CHICKEN2(pipe);
-	u32 temp;
-	int retries;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	int dpll_reg = DPLL(pipe);
+	int dpll;
 
-	temp = I915_READ(dslreg);
-	DELAY(500);
-	for (retries = 5; retries > 0; retries--) {
-		if (I915_READ(dslreg) != temp)
-			break;
+	if (HAS_PCH_SPLIT(dev_priv))
+		return;
+
+	if (!dev_priv->lvds_downclock_avail)
+		return;
+
+	dpll = I915_READ(dpll_reg);
+	if (!HAS_PIPE_CXSR(dev_priv) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
+		DRM_DEBUG_DRIVER("upclocking LVDS\n");
+
+		assert_panel_unlocked(dev_priv, pipe);
+
+		dpll &= ~DISPLAY_RATE_SELECT_FPA1;
+		I915_WRITE(dpll_reg, dpll);
+		intel_wait_for_vblank(dev, pipe);
+
+		dpll = I915_READ(dpll_reg);
+		if (dpll & DISPLAY_RATE_SELECT_FPA1)
+			DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
 	}
-	if (retries == 0) {
-		/* Without this, mode sets may fail silently on FDI */
-		I915_WRITE(tc2reg, TRANS_AUTOTRAIN_GEN_STALL_DIS);
-		DELAY(250);
-		I915_WRITE(tc2reg, 0);
-		for (retries = 5; retries > 0; retries--) {
-			if (I915_READ(dslreg) != temp)
-				break;
-		}
-		if (retries == 0)
-			DRM_ERROR("mode set failed: pipe %d stuck\n", pipe);
+
+	/* Schedule downclock */
+#ifdef notyet
+	callout_reset(&intel_crtc->idle_callout, CRTC_IDLE_TIMEOUT,
+	    intel_crtc_idle_timer, intel_crtc);
+#else
+	printf("%s todo schedule downclock\n", __func__);
+#endif
+}
+
+#ifdef notyet
+static void intel_decrease_pllclock(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+	if (HAS_PCH_SPLIT(dev_priv))
+		return;
+
+	if (!dev_priv->lvds_downclock_avail)
+		return;
+
+	/*
+	 * Since this is called by a timer, we should never get here in
+	 * the manual case.
+	 */
+	if (!HAS_PIPE_CXSR(dev_priv) && intel_crtc->lowfreq_avail) {
+		int pipe = intel_crtc->pipe;
+		int dpll_reg = DPLL(pipe);
+		u32 dpll;
+
+		DRM_DEBUG_DRIVER("downclocking LVDS\n");
+
+		assert_panel_unlocked(dev_priv, pipe);
+
+		dpll = I915_READ(dpll_reg);
+		dpll |= DISPLAY_RATE_SELECT_FPA1;
+		I915_WRITE(dpll_reg, dpll);
+		intel_wait_for_vblank(dev, pipe);
+		dpll = I915_READ(dpll_reg);
+		if (!(dpll & DISPLAY_RATE_SELECT_FPA1))
+			DRM_DEBUG_DRIVER("failed to downclock LVDS!\n");
 	}
 }
+#endif
 
-static void ironlake_crtc_enable(struct drm_crtc *crtc)
+#ifdef notyet
+/**
+ * intel_idle_update - adjust clocks for idleness
+ * @work: work struct
+ *
+ * Either the GPU or display (or both) went idle.  Check the busy status
+ * here and adjust the CRTC and GPU clocks as necessary.
+ */
+static void intel_idle_update(void *arg, int pending)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = arg;
+	struct drm_device *dev = (struct drm_device *)dev_priv->drmdev;
+	struct drm_crtc *crtc;
+	struct intel_crtc *intel_crtc;
+
+	if (!i915_powersave)
+		return;
+
+	DRM_LOCK();
+
+	i915_update_gfx_val(dev_priv);
+
+	TAILQ_FOREACH(crtc, &dev->mode_config.crtc_list, head) {
+		/* Skip inactive CRTCs */
+		if (!crtc->fb)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		if (!intel_crtc->busy)
+			intel_decrease_pllclock(crtc);
+	}
+
+	DRM_UNLOCK();
 }
+#endif
 
-static void ironlake_crtc_disable(struct drm_crtc *crtc)
+/**
+ * intel_mark_busy - mark the GPU and possibly the display busy
+ * @dev: drm device
+ * @obj: object we're operating on
+ *
+ * Callers can use this function to indicate that the GPU is busy processing
+ * commands.  If @obj matches one of the CRTC objects (i.e. it's a scanout
+ * buffer), we'll also mark the display as busy, so we know to increase its
+ * clock frequency.
+ */
+void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj)
 {
-	printf("%s stub\n", __func__);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = NULL;
+	struct intel_framebuffer *intel_fb;
+	struct intel_crtc *intel_crtc;
+
+	if (!drm_core_check_feature(dev, DRIVER_MODESET))
+		return;
+
+	if (!dev_priv->busy)
+		dev_priv->busy = true;
+	else
+#ifdef notyet
+		callout_reset(&dev_priv->idle_callout, GPU_IDLE_TIMEOUT,
+		    intel_gpu_idle_timer, dev);
+#else
+		printf("%s todo reset timeout\n", __func__);
+#endif
+
+	TAILQ_FOREACH(crtc, &dev->mode_config.crtc_list, head) {
+		if (!crtc->fb)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		intel_fb = to_intel_framebuffer(crtc->fb);
+		if (intel_fb->obj == obj) {
+			if (!intel_crtc->busy) {
+				/* Non-busy -> busy, upclock */
+				intel_increase_pllclock(crtc);
+				intel_crtc->busy = true;
+			} else {
+				/* Busy -> busy, put off timer */
+#ifdef notyet
+				callout_reset(&intel_crtc->idle_callout, 
+				    CRTC_IDLE_TIMEOUT, intel_crtc_idle_timer,
+				    intel_crtc);
+#else
+				printf("%s todo reset timeout (2)\n", __func__);
+#endif
+			}
+		}
+	}
 }
 
-static void i9xx_crtc_enable(struct drm_crtc *crtc)
+static void intel_crtc_destroy(struct drm_crtc *crtc)
+{
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+//	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_unpin_work *work;
+
+	mtx_enter(&dev->event_lock);
+	work = intel_crtc->unpin_work;
+	intel_crtc->unpin_work = NULL;
+	mtx_leave(&dev->event_lock);
+
+	if (work) {
+#ifdef notyet
+		taskqueue_cancel(dev_priv->tq, &work->task, NULL);
+		taskqueue_drain(dev_priv->tq, &work->task);
+#else
+		printf("%s todo cleanup tasks\n", __func__);
+#endif
+		free(work, M_DRM);
+	}
+
+	drm_crtc_cleanup(crtc);
+
+	free(intel_crtc, M_DRM);
+}
+
+#ifdef notyet
+static void intel_unpin_work_fn(void *arg, int pending)
 {
 	printf("%s stub\n", __func__);
+#ifdef notyet
+	struct intel_unpin_work *work = arg;
+	struct drm_device *dev;
+
+	dev = work->dev;
+	DRM_LOCK();
+	intel_unpin_fb_obj(work->old_fb_obj);
+	drm_gem_object_unreference(&work->pending_flip_obj->base);
+	drm_gem_object_unreference(&work->old_fb_obj->base);
+
+	intel_update_fbc(work->dev);
+	DRM_UNLOCK();
+	free(work, M_DRM);
+#endif
 }
+#endif
 
-static void i9xx_crtc_disable(struct drm_crtc *crtc)
+static void do_intel_finish_page_flip(struct drm_device *dev,
+				      struct drm_crtc *crtc)
 {
 	printf("%s stub\n", __func__);
+#ifdef notyet
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_unpin_work *work;
+	struct drm_i915_gem_object *obj;
+	struct drm_pending_vblank_event *e;
+	struct timeval tnow, tvbl;
+
+	/* Ignore early vblank irqs */
+	if (intel_crtc == NULL)
+		return;
+
+	microtime(&tnow);
+
+	mtx_enter(&dev->event_lock);
+	work = intel_crtc->unpin_work;
+	if (work == NULL || !work->pending) {
+		mtx_leave(&dev->event_lock);
+		return;
+	}
+
+	intel_crtc->unpin_work = NULL;
+
+	if (work->event) {
+		e = work->event;
+		e->event.sequence = drm_vblank_count_and_time(dev, intel_crtc->pipe, &tvbl);
+
+		/* Called before vblank count and timestamps have
+		 * been updated for the vblank interval of flip
+		 * completion? Need to increment vblank count and
+		 * add one videorefresh duration to returned timestamp
+		 * to account for this. We assume this happened if we
+		 * get called over 0.9 frame durations after the last
+		 * timestamped vblank.
+		 *
+		 * This calculation can not be used with vrefresh rates
+		 * below 5Hz (10Hz to be on the safe side) without
+		 * promoting to 64 integers.
+		 */
+		if (10 * (timeval_to_ns(&tnow) - timeval_to_ns(&tvbl)) >
+		    9 * crtc->framedur_ns) {
+			e->event.sequence++;
+			tvbl = ns_to_timeval(timeval_to_ns(&tvbl) +
+					     crtc->framedur_ns);
+		}
+
+		e->event.tv_sec = tvbl.tv_sec;
+		e->event.tv_usec = tvbl.tv_usec;
+
+		list_add_tail(&e->base.link,
+			      &e->base.file_priv->event_list);
+		drm_event_wakeup(&e->base);
+	}
+
+	drm_vblank_put(dev, intel_crtc->pipe);
+
+	obj = work->old_fb_obj;
+
+	atomic_clear_int(&obj->pending_flip, 1 << intel_crtc->plane);
+	if (atomic_read(&obj->pending_flip) == 0)
+		wakeup(&obj->pending_flip);
+	mtx_leave(&dev->event_lock);
+
+	taskqueue_enqueue(dev_priv->tq, &work->task);
+
+	CTR2(KTR_DRM, "i915_flip_complete %d %p", intel_crtc->plane,
+	    work->pending_flip_obj);
+#endif
 }
 
-/* Prepare for a mode set.
- *
- * Note we could be a lot smarter here.  We need to figure out which outputs
- * will be enabled, which disabled (in short, how the config will changes)
- * and perform the minimum necessary steps to accomplish that, e.g. updating
- * watermarks, FBC configuration, making sure PLLs are programmed correctly,
- * panel fitting is in the proper state, etc.
- */
-static void i9xx_crtc_prepare(struct drm_crtc *crtc)
+void intel_finish_page_flip(struct drm_device *dev, int pipe)
 {
-	i9xx_crtc_disable(crtc);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+
+	do_intel_finish_page_flip(dev, crtc);
 }
 
-static void i9xx_crtc_commit(struct drm_crtc *crtc)
+void intel_finish_page_flip_plane(struct drm_device *dev, int plane)
 {
-	i9xx_crtc_enable(crtc);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane];
+
+	do_intel_finish_page_flip(dev, crtc);
 }
 
-static void ironlake_crtc_prepare(struct drm_crtc *crtc)
+void intel_prepare_page_flip(struct drm_device *dev, int plane)
 {
-	ironlake_crtc_disable(crtc);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc =
+		to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]);
+
+	mtx_enter(&dev->event_lock);
+	if (intel_crtc->unpin_work) {
+		if ((++intel_crtc->unpin_work->pending) > 1)
+			DRM_ERROR("Prepared flip multiple times\n");
+	} else {
+		DRM_DEBUG("preparing flip with no unpin work?\n");
+	}
+	mtx_leave(&dev->event_lock);
 }
 
-static void ironlake_crtc_commit(struct drm_crtc *crtc)
+#ifdef notyet
+static int intel_gen2_queue_flip(struct drm_device *dev,
+				 struct drm_crtc *crtc,
+				 struct drm_framebuffer *fb,
+				 struct drm_i915_gem_object *obj)
 {
-	ironlake_crtc_enable(crtc);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	unsigned long offset;
+	u32 flip_mask;
+	int ret;
+
+	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+	if (ret)
+		goto out;
+
+	/* Offset into the new buffer for cases of shared fbs between CRTCs */
+	offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
+
+	ret = BEGIN_LP_RING(6);
+	if (ret)
+		goto out;
+
+	/* Can't queue multiple flips, so wait for the previous
+	 * one to finish before executing the next.
+	 */
+	if (intel_crtc->plane)
+		flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
+	else
+		flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
+	OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
+	OUT_RING(MI_NOOP);
+	OUT_RING(MI_DISPLAY_FLIP |
+		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+	OUT_RING(fb->pitches[0]);
+	OUT_RING(obj->gtt_offset + offset);
+	OUT_RING(0); /* aux display base address, unused */
+	ADVANCE_LP_RING();
+out:
+	return ret;
 }
 
-void intel_encoder_prepare(struct drm_encoder *encoder)
+static int intel_gen3_queue_flip(struct drm_device *dev,
+				 struct drm_crtc *crtc,
+				 struct drm_framebuffer *fb,
+				 struct drm_i915_gem_object *obj)
 {
-	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
-	/* lvds has its own version of prepare see intel_lvds_prepare */
-	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	unsigned long offset;
+	u32 flip_mask;
+	int ret;
+
+	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+	if (ret)
+		goto out;
+
+	/* Offset into the new buffer for cases of shared fbs between CRTCs */
+	offset = crtc->y * fb->pitches[0] + crtc->x * fb->bits_per_pixel/8;
+
+	ret = BEGIN_LP_RING(6);
+	if (ret)
+		goto out;
+
+	if (intel_crtc->plane)
+		flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
+	else
+		flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
+	OUT_RING(MI_WAIT_FOR_EVENT | flip_mask);
+	OUT_RING(MI_NOOP);
+	OUT_RING(MI_DISPLAY_FLIP_I915 |
+		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+	OUT_RING(fb->pitches[0]);
+	OUT_RING(obj->gtt_offset + offset);
+	OUT_RING(MI_NOOP);
+
+	ADVANCE_LP_RING();
+out:
+	return ret;
 }
 
-void intel_encoder_commit(struct drm_encoder *encoder)
+static int intel_gen4_queue_flip(struct drm_device *dev,
+				 struct drm_crtc *crtc,
+				 struct drm_framebuffer *fb,
+				 struct drm_i915_gem_object *obj)
 {
-	struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
-	struct drm_device *dev = encoder->dev;
 	struct inteldrm_softc *dev_priv = dev->dev_private;
-	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
-	struct intel_crtc *intel_crtc = to_intel_crtc(intel_encoder->base.crtc);
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	uint32_t pf, pipesrc;
+	int ret;
 
-	/* lvds has its own version of commit see intel_lvds_commit */
-	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+	if (ret)
+		goto out;
 
-	if (HAS_PCH_CPT(dev_priv))
-		intel_cpt_verify_modeset(dev, intel_crtc->pipe);
+	ret = BEGIN_LP_RING(4);
+	if (ret)
+		goto out;
+
+	/* i965+ uses the linear or tiled offsets from the
+	 * Display Registers (which do not change across a page-flip)
+	 * so we need only reprogram the base address.
+	 */
+	OUT_RING(MI_DISPLAY_FLIP |
+		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+	OUT_RING(fb->pitches[0]);
+	OUT_RING(obj->gtt_offset | obj->tiling_mode);
+
+	/* XXX Enabling the panel-fitter across page-flip is so far
+	 * untested on non-native modes, so ignore it for now.
+	 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
+	 */
+	pf = 0;
+	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
+	OUT_RING(pf | pipesrc);
+	ADVANCE_LP_RING();
+out:
+	return ret;
 }
 
-void intel_encoder_destroy(struct drm_encoder *encoder)
+static int intel_gen6_queue_flip(struct drm_device *dev,
+				 struct drm_crtc *crtc,
+				 struct drm_framebuffer *fb,
+				 struct drm_i915_gem_object *obj)
 {
-	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	uint32_t pf, pipesrc;
+	int ret;
+
+	ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv));
+	if (ret)
+		goto out;
+
+	ret = BEGIN_LP_RING(4);
+	if (ret)
+		goto out;
+
+	OUT_RING(MI_DISPLAY_FLIP |
+		 MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
+	OUT_RING(fb->pitches[0] | obj->tiling_mode);
+	OUT_RING(obj->gtt_offset);
+
+	/* Contrary to the suggestions in the documentation,
+	 * "Enable Panel Fitter" does not seem to be required when page
+	 * flipping with a non-native mode, and worse causes a normal
+	 * modeset to fail.
+	 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
+	 */
+	pf = 0;
+	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
+	OUT_RING(pf | pipesrc);
+	ADVANCE_LP_RING();
+out:
+	return ret;
+}
 
-	drm_encoder_cleanup(encoder);
-	free(intel_encoder, M_DRM);
+/*
+ * On gen7 we currently use the blit ring because (in early silicon at least)
+ * the render ring doesn't give us interrpts for page flip completion, which
+ * means clients will hang after the first flip is queued.  Fortunately the
+ * blit ring generates interrupts properly, so use it instead.
+ */
+static int intel_gen7_queue_flip(struct drm_device *dev,
+				 struct drm_crtc *crtc,
+				 struct drm_framebuffer *fb,
+				 struct drm_i915_gem_object *obj)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_ring_buffer *ring = &dev_priv->rings[BCS];
+	int ret;
+
+	ret = intel_pin_and_fence_fb_obj(dev, obj, ring);
+	if (ret)
+		goto out;
+
+	ret = intel_ring_begin(ring, 4);
+	if (ret)
+		goto out;
+
+	intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19));
+	intel_ring_emit(ring, (fb->pitches[0] | obj->tiling_mode));
+	intel_ring_emit(ring, (obj->gtt_offset));
+	intel_ring_emit(ring, (MI_NOOP));
+	intel_ring_advance(ring);
+out:
+	return ret;
 }
 
+static int intel_default_queue_flip(struct drm_device *dev,
+				    struct drm_crtc *crtc,
+				    struct drm_framebuffer *fb,
+				    struct drm_i915_gem_object *obj)
+{
+	return -ENODEV;
+}
+#endif // notyet
 
 static int intel_crtc_page_flip(struct drm_crtc *crtc,
 				struct drm_framebuffer *fb,
@@ -1307,6 +7769,90 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 {
 	printf("%s stub\n", __func__);
 	return EINVAL;
+#ifdef notyet
+	struct drm_device *dev = crtc->dev;
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_framebuffer *intel_fb;
+	struct drm_i915_gem_object *obj;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_unpin_work *work;
+	int ret;
+
+	work = malloc(sizeof *work, M_DRM, M_WAITOK | M_ZERO);
+
+	work->event = event;
+	work->dev = crtc->dev;
+	intel_fb = to_intel_framebuffer(crtc->fb);
+	work->old_fb_obj = intel_fb->obj;
+#ifdef notyet
+	TASK_INIT(&work->task, 0, intel_unpin_work_fn, work);
+#else
+	printf("%s todo init task\n", __func__);
+#endif
+
+	ret = drm_vblank_get(dev, intel_crtc->pipe);
+	if (ret)
+		goto free_work;
+
+	/* We borrow the event spin lock for protecting unpin_work */
+	mtx_lock(&dev->event_lock);
+	if (intel_crtc->unpin_work) {
+		mtx_unlock(&dev->event_lock);
+		free(work, M_DRM);
+		drm_vblank_put(dev, intel_crtc->pipe);
+
+		DRM_DEBUG("flip queue: crtc already busy\n");
+		return -EBUSY;
+	}
+	intel_crtc->unpin_work = work;
+	mtx_unlock(&dev->event_lock);
+
+	intel_fb = to_intel_framebuffer(fb);
+	obj = intel_fb->obj;
+
+	DRM_LOCK();
+
+	/* Reference the objects for the scheduled work. */
+	drm_gem_object_reference(&work->old_fb_obj->base);
+	drm_gem_object_reference(&obj->base);
+
+	crtc->fb = fb;
+
+	work->pending_flip_obj = obj;
+
+	work->enable_stall_check = true;
+
+	/* Block clients from rendering to the new back buffer until
+	 * the flip occurs and the object is no longer visible.
+	 */
+	atomic_set_int(&work->old_fb_obj->pending_flip, 1 << intel_crtc->plane);
+
+	ret = dev_priv->display.queue_flip(dev, crtc, fb, obj);
+	if (ret)
+		goto cleanup_pending;
+	intel_disable_fbc(dev);
+	DRM_UNLOCK();
+
+	CTR2(KTR_DRM, "i915_flip_request %d %p", intel_crtc->plane, obj);
+
+	return 0;
+
+cleanup_pending:
+	atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
+	drm_gem_object_unreference(&work->old_fb_obj->base);
+	drm_gem_object_unreference(&obj->base);
+	DRM_UNLOCK();
+
+	mtx_lock(&dev->event_lock);
+	intel_crtc->unpin_work = NULL;
+	mtx_unlock(&dev->event_lock);
+
+	drm_vblank_put(dev, intel_crtc->pipe);
+free_work:
+	free(work, M_DRM);
+
+	return ret;
+#endif
 }
 
 static void intel_sanitize_modesetting(struct drm_device *dev,
@@ -1416,9 +7962,6 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 
 	KASSERT(pipe < nitems(dev_priv->plane_to_crtc_mapping) &&
 	    dev_priv->plane_to_crtc_mapping[intel_crtc->plane] == NULL);
-#ifdef notyet
-	    ("plane_to_crtc is already initialized"));
-#endif
 	dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base;
 	dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base;
 
@@ -1442,91 +7985,1242 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 
 #ifdef notyet
 	callout_init(&intel_crtc->idle_callout, CALLOUT_MPSAFE);
+#else
+	printf("%s todo init timeout\n", __func__);
 #endif
 }
 
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+				struct drm_file *file)
+{
+	printf("%s stub\n", __func__);
+	return EINVAL;
+#ifdef notyet
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
+	struct drm_mode_object *drmmode_obj;
+	struct intel_crtc *crtc;
 
-struct cxsr_latency {
-	int is_desktop;
-	int is_ddr3;
-	unsigned long fsb_freq;
-	unsigned long mem_freq;
-	unsigned long display_sr;
-	unsigned long display_hpll_disable;
-	unsigned long cursor_sr;
-	unsigned long cursor_hpll_disable;
+	if (!dev_priv) {
+		DRM_ERROR("called with no initialization\n");
+		return -EINVAL;
+	}
+
+	drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id,
+			DRM_MODE_OBJECT_CRTC);
+
+	if (!drmmode_obj) {
+		DRM_ERROR("no such CRTC id\n");
+		return -EINVAL;
+	}
+
+	crtc = to_intel_crtc(obj_to_crtc(drmmode_obj));
+	pipe_from_crtc_id->pipe = crtc->pipe;
+
+	return 0;
+#endif
+}
+
+static int intel_encoder_clones(struct drm_device *dev, int type_mask)
+{
+	struct drm_encoder *encoder;
+	struct intel_encoder *intel_encoder;
+	int index_mask = 0;
+	int entry = 0;
+
+	TAILQ_FOREACH(encoder, &dev->mode_config.encoder_list, head) {
+		intel_encoder = to_intel_encoder(encoder);
+		if (type_mask & intel_encoder->clone_mask)
+			index_mask |= (1 << entry);
+		entry++;
+	}
+
+	return index_mask;
+}
+
+static bool has_edp_a(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	if (!IS_MOBILE(dev_priv))
+		return false;
+
+	if ((I915_READ(DP_A) & DP_DETECTED) == 0)
+		return false;
+
+	if (IS_GEN5(dev_priv) &&
+	    (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
+		return false;
+
+	return true;
+}
+
+static void intel_setup_outputs(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_encoder *encoder;
+	struct intel_encoder *intel_encoder;
+	bool dpd_is_edp = false;
+	bool has_lvds;
+
+	has_lvds = intel_lvds_init(dev);
+	if (!has_lvds && !HAS_PCH_SPLIT(dev_priv)) {
+		/* disable the panel fitter on everything but LVDS */
+		I915_WRITE(PFIT_CONTROL, 0);
+	}
+
+	if (HAS_PCH_SPLIT(dev_priv)) {
+		dpd_is_edp = intel_dpd_is_edp(dev);
+
+		if (has_edp_a(dev))
+			intel_dp_init(dev, DP_A);
+
+		if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
+			intel_dp_init(dev, PCH_DP_D);
+	}
+
+	intel_crt_init(dev);
+
+	if (HAS_PCH_SPLIT(dev_priv)) {
+		int found;
+
+		DRM_DEBUG_KMS(
+"HDMIB %d PCH_DP_B %d HDMIC %d HDMID %d PCH_DP_C %d PCH_DP_D %d LVDS %d\n",
+		    (I915_READ(HDMIB) & PORT_DETECTED) != 0,
+		    (I915_READ(PCH_DP_B) & DP_DETECTED) != 0,
+		    (I915_READ(HDMIC) & PORT_DETECTED) != 0,
+		    (I915_READ(HDMID) & PORT_DETECTED) != 0,
+		    (I915_READ(PCH_DP_C) & DP_DETECTED) != 0,
+		    (I915_READ(PCH_DP_D) & DP_DETECTED) != 0,
+		    (I915_READ(PCH_LVDS) & LVDS_DETECTED) != 0);
+
+		if (I915_READ(HDMIB) & PORT_DETECTED) {
+			/* PCH SDVOB multiplex with HDMIB */
+			found = intel_sdvo_init(dev, PCH_SDVOB);
+			if (!found)
+				intel_hdmi_init(dev, HDMIB);
+			if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
+				intel_dp_init(dev, PCH_DP_B);
+		}
+
+		if (I915_READ(HDMIC) & PORT_DETECTED)
+			intel_hdmi_init(dev, HDMIC);
+
+		if (I915_READ(HDMID) & PORT_DETECTED)
+			intel_hdmi_init(dev, HDMID);
+
+		if (I915_READ(PCH_DP_C) & DP_DETECTED)
+			intel_dp_init(dev, PCH_DP_C);
+
+		if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
+			intel_dp_init(dev, PCH_DP_D);
+
+	} else if (SUPPORTS_DIGITAL_OUTPUTS(dev_priv)) {
+		bool found = false;
+
+		if (I915_READ(SDVOB) & SDVO_DETECTED) {
+			DRM_DEBUG_KMS("probing SDVOB\n");
+			found = intel_sdvo_init(dev, SDVOB);
+			if (!found && SUPPORTS_INTEGRATED_HDMI(dev_priv)) {
+				DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
+				intel_hdmi_init(dev, SDVOB);
+			}
+
+			if (!found && SUPPORTS_INTEGRATED_DP(dev_priv)) {
+				DRM_DEBUG_KMS("probing DP_B\n");
+				intel_dp_init(dev, DP_B);
+			}
+		}
+
+		/* Before G4X SDVOC doesn't have its own detect register */
+
+		if (I915_READ(SDVOB) & SDVO_DETECTED) {
+			DRM_DEBUG_KMS("probing SDVOC\n");
+			found = intel_sdvo_init(dev, SDVOC);
+		}
+
+		if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) {
+
+			if (SUPPORTS_INTEGRATED_HDMI(dev_priv)) {
+				DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
+				intel_hdmi_init(dev, SDVOC);
+			}
+			if (SUPPORTS_INTEGRATED_DP(dev_priv)) {
+				DRM_DEBUG_KMS("probing DP_C\n");
+				intel_dp_init(dev, DP_C);
+			}
+		}
+
+		if (SUPPORTS_INTEGRATED_DP(dev_priv) &&
+		    (I915_READ(DP_D) & DP_DETECTED)) {
+			DRM_DEBUG_KMS("probing DP_D\n");
+			intel_dp_init(dev, DP_D);
+		}
+	} else if (IS_GEN2(dev_priv)) {
+		intel_dvo_init(dev);
+	}
+
+	if (SUPPORTS_TV(dev_priv))
+		intel_tv_init(dev);
+
+	TAILQ_FOREACH(encoder, &dev->mode_config.encoder_list, head) {
+		intel_encoder = to_intel_encoder(encoder);
+		encoder->possible_crtcs = intel_encoder->crtc_mask;
+		encoder->possible_clones =
+			intel_encoder_clones(dev, intel_encoder->clone_mask);
+	}
+
+	/* disable all the possible outputs/crtcs before entering KMS mode */
+#ifdef notyet
+	drm_helper_disable_unused_functions(dev);
+#else
+	printf("%s skipping call to drm_helper_disable_unused_functions\n",
+	    __func__);
+#endif
+
+	if (HAS_PCH_SPLIT(dev_priv))
+		ironlake_init_pch_refclk(dev);
+}
+
+static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
+{
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+
+	drm_framebuffer_cleanup(fb);
+#ifdef notyet
+	drm_gem_object_unreference_unlocked(&intel_fb->obj->base);
+#else
+	printf("%s todo gem fb cleanup\n", __func__);
+#endif
+
+	free(intel_fb, M_DRM);
+}
+
+static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
+						struct drm_file *file,
+						unsigned int *handle)
+{
+	printf("%s stub\n", __func__);
+	return -1;
+#ifdef notyet
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_i915_gem_object *obj = intel_fb->obj;
+
+	return drm_gem_handle_create(file, &obj->base, handle);
+#endif
+}
+
+static const struct drm_framebuffer_funcs intel_fb_funcs = {
+	.destroy = intel_user_framebuffer_destroy,
+	.create_handle = intel_user_framebuffer_create_handle,
 };
 
-static const struct cxsr_latency cxsr_latency_table[] = {
-	{1, 0, 800, 400, 3382, 33382, 3983, 33983},    /* DDR2-400 SC */
-	{1, 0, 800, 667, 3354, 33354, 3807, 33807},    /* DDR2-667 SC */
-	{1, 0, 800, 800, 3347, 33347, 3763, 33763},    /* DDR2-800 SC */
-	{1, 1, 800, 667, 6420, 36420, 6873, 36873},    /* DDR3-667 SC */
-	{1, 1, 800, 800, 5902, 35902, 6318, 36318},    /* DDR3-800 SC */
+#ifdef notyet
+int intel_framebuffer_init(struct drm_device *dev,
+			   struct intel_framebuffer *intel_fb,
+			   struct drm_mode_fb_cmd2 *mode_cmd,
+			   struct drm_i915_gem_object *obj)
+{
+	int ret;
+
+	if (obj->tiling_mode == I915_TILING_Y)
+		return -EINVAL;
+
+	if (mode_cmd->pitches[0] & 63)
+		return -EINVAL;
+
+	switch (mode_cmd->pixel_format) {
+	case DRM_FORMAT_RGB332:
+	case DRM_FORMAT_RGB565:
+	case DRM_FORMAT_XRGB8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XRGB2101010:
+	case DRM_FORMAT_ARGB2101010:
+		/* RGB formats are common across chipsets */
+		break;
+	case DRM_FORMAT_YUYV:
+	case DRM_FORMAT_UYVY:
+	case DRM_FORMAT_YVYU:
+	case DRM_FORMAT_VYUY:
+		break;
+	default:
+		DRM_DEBUG_KMS("unsupported pixel format %u\n",
+				mode_cmd->pixel_format);
+		return -EINVAL;
+	}
 
-	{1, 0, 667, 400, 3400, 33400, 4021, 34021},    /* DDR2-400 SC */
-	{1, 0, 667, 667, 3372, 33372, 3845, 33845},    /* DDR2-667 SC */
-	{1, 0, 667, 800, 3386, 33386, 3822, 33822},    /* DDR2-800 SC */
-	{1, 1, 667, 667, 6438, 36438, 6911, 36911},    /* DDR3-667 SC */
-	{1, 1, 667, 800, 5941, 35941, 6377, 36377},    /* DDR3-800 SC */
+	ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs);
+	if (ret) {
+		DRM_ERROR("framebuffer init failed %d\n", ret);
+		return ret;
+	}
 
-	{1, 0, 400, 400, 3472, 33472, 4173, 34173},    /* DDR2-400 SC */
-	{1, 0, 400, 667, 3443, 33443, 3996, 33996},    /* DDR2-667 SC */
-	{1, 0, 400, 800, 3430, 33430, 3946, 33946},    /* DDR2-800 SC */
-	{1, 1, 400, 667, 6509, 36509, 7062, 37062},    /* DDR3-667 SC */
-	{1, 1, 400, 800, 5985, 35985, 6501, 36501},    /* DDR3-800 SC */
+	drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd);
+	intel_fb->obj = obj;
+	return 0;
+}
+#endif
 
-	{0, 0, 800, 400, 3438, 33438, 4065, 34065},    /* DDR2-400 SC */
-	{0, 0, 800, 667, 3410, 33410, 3889, 33889},    /* DDR2-667 SC */
-	{0, 0, 800, 800, 3403, 33403, 3845, 33845},    /* DDR2-800 SC */
-	{0, 1, 800, 667, 6476, 36476, 6955, 36955},    /* DDR3-667 SC */
-	{0, 1, 800, 800, 5958, 35958, 6400, 36400},    /* DDR3-800 SC */
+static int
+intel_user_framebuffer_create(struct drm_device *dev,
+    struct drm_file *filp, struct drm_mode_fb_cmd2 *mode_cmd,
+    struct drm_framebuffer **res)
+{
+	printf("%s stub\n", __func__);
+	return EINVAL;
+#ifdef notyet
+	struct drm_i915_gem_object *obj;
 
-	{0, 0, 667, 400, 3456, 33456, 4103, 34106},    /* DDR2-400 SC */
-	{0, 0, 667, 667, 3428, 33428, 3927, 33927},    /* DDR2-667 SC */
-	{0, 0, 667, 800, 3443, 33443, 3905, 33905},    /* DDR2-800 SC */
-	{0, 1, 667, 667, 6494, 36494, 6993, 36993},    /* DDR3-667 SC */
-	{0, 1, 667, 800, 5998, 35998, 6460, 36460},    /* DDR3-800 SC */
+	obj = to_intel_bo(drm_gem_object_lookup(dev, filp,
+						mode_cmd->handles[0]));
+	if (&obj->base == NULL)
+		return (-ENOENT);
 
-	{0, 0, 400, 400, 3528, 33528, 4255, 34255},    /* DDR2-400 SC */
-	{0, 0, 400, 667, 3500, 33500, 4079, 34079},    /* DDR2-667 SC */
-	{0, 0, 400, 800, 3487, 33487, 4029, 34029},    /* DDR2-800 SC */
-	{0, 1, 400, 667, 6566, 36566, 7145, 37145},    /* DDR3-667 SC */
-	{0, 1, 400, 800, 6042, 36042, 6584, 36584},    /* DDR3-800 SC */
+	return (intel_framebuffer_create(dev, mode_cmd, obj, res));
+#endif
+}
+
+static const struct drm_mode_config_funcs intel_mode_funcs = {
+	.fb_create = intel_user_framebuffer_create,
+	.output_poll_changed = intel_fb_output_poll_changed,
 };
 
-static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop,
-							 int is_ddr3,
-							 int fsb,
-							 int mem)
+#ifdef notyet
+static struct drm_i915_gem_object *
+intel_alloc_context_page(struct drm_device *dev)
 {
-	const struct cxsr_latency *latency;
-	int i;
+	struct drm_i915_gem_object *ctx;
+	int ret;
 
-	if (fsb == 0 || mem == 0)
+//	DRM_LOCK_ASSERT(dev);
+
+	ctx = i915_gem_alloc_object(dev, 4096);
+	if (!ctx) {
+		DRM_DEBUG("failed to alloc power context, RC6 disabled\n");
 		return NULL;
+	}
 
-	for (i = 0; i < nitems(cxsr_latency_table); i++) {
-		latency = &cxsr_latency_table[i];
-		if (is_desktop == latency->is_desktop &&
-		    is_ddr3 == latency->is_ddr3 &&
-		    fsb == latency->fsb_freq && mem == latency->mem_freq)
-			return latency;
+	ret = i915_gem_object_pin(ctx, 4096, true);
+	if (ret) {
+		DRM_ERROR("failed to pin power context: %d\n", ret);
+		goto err_unref;
 	}
 
-	DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n");
+	ret = i915_gem_object_set_to_gtt_domain(ctx, 1);
+	if (ret) {
+		DRM_ERROR("failed to set-domain on power context: %d\n", ret);
+		goto err_unpin;
+	}
+
+	return ctx;
 
+err_unpin:
+	i915_gem_object_unpin(ctx);
+err_unref:
+	drm_gem_object_unreference(&ctx->base);
+	DRM_UNLOCK();
 	return NULL;
 }
+#endif
 
-static void pineview_disable_cxsr(struct drm_device *dev)
+bool ironlake_set_drps(struct drm_device *dev, u8 val)
 {
 	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u16 rgvswctl;
 
-	/* deactivate cxsr */
-	I915_WRITE(DSPFW3, I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN);
+	rgvswctl = I915_READ16(MEMSWCTL);
+	if (rgvswctl & MEMCTL_CMD_STS) {
+		DRM_DEBUG("gpu busy, RCS change rejected\n");
+		return false; /* still busy with another command */
+	}
+
+	rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) |
+		(val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM;
+	I915_WRITE16(MEMSWCTL, rgvswctl);
+	POSTING_READ16(MEMSWCTL);
+
+	rgvswctl |= MEMCTL_CMD_STS;
+	I915_WRITE16(MEMSWCTL, rgvswctl);
+
+	return true;
+}
+
+void ironlake_enable_drps(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u32 rgvmodectl = I915_READ(MEMMODECTL);
+	u8 fmax, fmin, fstart, vstart;
+	int retries;
+
+	/* Enable temp reporting */
+	I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN);
+	I915_WRITE16(TSC1, I915_READ(TSC1) | TSE);
+
+	/* 100ms RC evaluation intervals */
+	I915_WRITE(RCUPEI, 100000);
+	I915_WRITE(RCDNEI, 100000);
+
+	/* Set max/min thresholds to 90ms and 80ms respectively */
+	I915_WRITE(RCBMAXAVG, 90000);
+	I915_WRITE(RCBMINAVG, 80000);
+
+	I915_WRITE(MEMIHYST, 1);
+
+	/* Set up min, max, and cur for interrupt handling */
+	fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT;
+	fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
+	fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
+		MEMMODE_FSTART_SHIFT;
+
+	vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
+		PXVFREQ_PX_SHIFT;
+
+	dev_priv->fmax = fmax; /* IPS callback will increase this */
+	dev_priv->fstart = fstart;
+
+	dev_priv->max_delay = fstart;
+	dev_priv->min_delay = fmin;
+	dev_priv->cur_delay = fstart;
+
+	DRM_DEBUG("fmax: %d, fmin: %d, fstart: %d\n",
+			 fmax, fmin, fstart);
+
+	I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
+
+	/*
+	 * Interrupts will be enabled in ironlake_irq_postinstall
+	 */
+
+	I915_WRITE(VIDSTART, vstart);
+	POSTING_READ(VIDSTART);
+
+	rgvmodectl |= MEMMODE_SWMODE_EN;
+	I915_WRITE(MEMMODECTL, rgvmodectl);
+
+	for (retries = 10; retries > 0; retries--) {
+		if ((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0)
+			break;
+		DELAY(1);
+	}
+	if (retries == 0)
+		DRM_ERROR("stuck trying to change perf mode\n");
+
+	ironlake_set_drps(dev, fstart);
+
+	dev_priv->last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) +
+		I915_READ(0x112e0);
+//	dev_priv->last_time1 = jiffies_to_msecs(jiffies);
+	dev_priv->last_count2 = I915_READ(0x112f4);
+//	nanotime(&dev_priv->last_time2);
+}
+
+void ironlake_disable_drps(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u16 rgvswctl = I915_READ16(MEMSWCTL);
+
+	/* Ack interrupts, disable EFC interrupt */
+	I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN);
+	I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG);
+	I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT);
+	I915_WRITE(DEIIR, DE_PCU_EVENT);
+	I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT);
+
+	/* Go back to the starting frequency */
+	ironlake_set_drps(dev, dev_priv->fstart);
+//	pause("915dsp", 1);
+	rgvswctl |= MEMCTL_CMD_STS;
+	I915_WRITE(MEMSWCTL, rgvswctl);
+//	pause("915dsp", 1);
+
+}
+
+void gen6_set_rps(struct drm_device *dev, u8 val)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u32 swreq;
+
+	swreq = (val & 0x3ff) << 25;
+	I915_WRITE(GEN6_RPNSWREQ, swreq);
+}
+
+void gen6_disable_rps(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	I915_WRITE(GEN6_RPNSWREQ, 1 << 31);
+	I915_WRITE(GEN6_PMINTRMSK, 0xffffffff);
+	I915_WRITE(GEN6_PMIER, 0);
+	/* Complete PM interrupt masking here doesn't race with the rps work
+	 * item again unmasking PM interrupts because that is using a different
+	 * register (PMIMR) to mask PM interrupts. The only risk is in leaving
+	 * stale bits in PMIIR and PMIMR which gen6_enable_rps will clean up. */
+
+	mtx_enter(&dev_priv->rps_lock);
+	dev_priv->pm_iir = 0;
+	mtx_leave(&dev_priv->rps_lock);
+
+	I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR));
+}
+
+static unsigned long intel_pxfreq(u32 vidfreq)
+{
+	unsigned long freq;
+	int div = (vidfreq & 0x3f0000) >> 16;
+	int post = (vidfreq & 0x3000) >> 12;
+	int pre = (vidfreq & 0x7);
+
+	if (!pre)
+		return 0;
+
+	freq = ((div * 133333) / ((1<<post) * pre));
+
+	return freq;
+}
+
+void intel_init_emon(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u32 lcfuse;
+	u8 pxw[16];
+	int i;
+
+	/* Disable to program */
+	I915_WRITE(ECR, 0);
+	POSTING_READ(ECR);
+
+	/* Program energy weights for various events */
+	I915_WRITE(SDEW, 0x15040d00);
+	I915_WRITE(CSIEW0, 0x007f0000);
+	I915_WRITE(CSIEW1, 0x1e220004);
+	I915_WRITE(CSIEW2, 0x04000004);
+
+	for (i = 0; i < 5; i++)
+		I915_WRITE(PEW + (i * 4), 0);
+	for (i = 0; i < 3; i++)
+		I915_WRITE(DEW + (i * 4), 0);
+
+	/* Program P-state weights to account for frequency power adjustment */
+	for (i = 0; i < 16; i++) {
+		u32 pxvidfreq = I915_READ(PXVFREQ_BASE + (i * 4));
+		unsigned long freq = intel_pxfreq(pxvidfreq);
+		unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >>
+			PXVFREQ_PX_SHIFT;
+		unsigned long val;
+
+		val = vid * vid;
+		val *= (freq / 1000);
+		val *= 255;
+		val /= (127*127*900);
+		if (val > 0xff)
+			DRM_ERROR("bad pxval: %ld\n", val);
+		pxw[i] = val;
+	}
+	/* Render standby states get 0 weight */
+	pxw[14] = 0;
+	pxw[15] = 0;
+
+	for (i = 0; i < 4; i++) {
+		u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) |
+			(pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]);
+		I915_WRITE(PXW + (i * 4), val);
+	}
+
+	/* Adjust magic regs to magic values (more experimental results) */
+	I915_WRITE(OGW0, 0);
+	I915_WRITE(OGW1, 0);
+	I915_WRITE(EG0, 0x00007f00);
+	I915_WRITE(EG1, 0x0000000e);
+	I915_WRITE(EG2, 0x000e0000);
+	I915_WRITE(EG3, 0x68000300);
+	I915_WRITE(EG4, 0x42000000);
+	I915_WRITE(EG5, 0x00140031);
+	I915_WRITE(EG6, 0);
+	I915_WRITE(EG7, 0);
+
+	for (i = 0; i < 8; i++)
+		I915_WRITE(PXWL + (i * 4), 0);
+
+	/* Enable PMON + select events */
+	I915_WRITE(ECR, 0x80000019);
+
+	lcfuse = I915_READ(LCFUSE02);
+
+	dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
+}
+
+static int intel_enable_rc6(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	/*
+	 * Respect the kernel parameter if it is set
+	 */
+	if (i915_enable_rc6 >= 0)
+		return i915_enable_rc6;
+
+	/*
+	 * Disable RC6 on Ironlake
+	 */
+	if (INTEL_INFO(dev_priv)->gen == 5)
+		return 0;
+
+	/*
+	 * Enable rc6 on Sandybridge if DMA remapping is disabled
+	 */
+	if (INTEL_INFO(dev_priv)->gen == 6) {
+		DRM_DEBUG_DRIVER(
+		    "Sandybridge: intel_iommu_enabled %s -- RC6 %sabled\n",
+		     intel_iommu_enabled ? "true" : "false",
+		     !intel_iommu_enabled ? "en" : "dis");
+		return (intel_iommu_enabled ? 0 : INTEL_RC6_ENABLE);
+	}
+	DRM_DEBUG_DRIVER("RC6 and deep RC6 enabled\n");
+	return (INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE);
+}
+
+void gen6_enable_rps(struct inteldrm_softc *dev_priv)
+{
+	struct drm_device *dev = (struct drm_device *)dev_priv->drmdev;
+	u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+	u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
+	u32 pcu_mbox, rc6_mask = 0;
+	u32 gtfifodbg;
+	int cur_freq, min_freq, max_freq;
+	int rc6_mode;
+	int i;
+	int retries;
+
+	/* Here begins a magic sequence of register writes to enable
+	 * auto-downclocking.
+	 *
+	 * Perhaps there might be some value in exposing these to
+	 * userspace...
+	 */
+	I915_WRITE(GEN6_RC_STATE, 0);
+	DRM_LOCK();
+
+	/* Clear the DBG now so we don't confuse earlier errors */
+	if ((gtfifodbg = I915_READ(GTFIFODBG))) {
+		DRM_ERROR("GT fifo had a previous error %x\n", gtfifodbg);
+		I915_WRITE(GTFIFODBG, gtfifodbg);
+	}
+
+	gen6_gt_force_wake_get(dev_priv);
+
+	/* disable the counters and set deterministic thresholds */
+	I915_WRITE(GEN6_RC_CONTROL, 0);
+
+	I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16);
+	I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30);
+	I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
+	I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
+	I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
+
+	for (i = 0; i < I915_NUM_RINGS; i++)
+		I915_WRITE(RING_MAX_IDLE(dev_priv->rings[i].mmio_base), 10);
+
+	I915_WRITE(GEN6_RC_SLEEP, 0);
+	I915_WRITE(GEN6_RC1e_THRESHOLD, 1000);
+	I915_WRITE(GEN6_RC6_THRESHOLD, 50000);
+	I915_WRITE(GEN6_RC6p_THRESHOLD, 100000);
+	I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
+
+	rc6_mode = intel_enable_rc6(dev);
+	if (rc6_mode & INTEL_RC6_ENABLE)
+		rc6_mask |= GEN6_RC_CTL_RC6_ENABLE;
+
+	if (rc6_mode & INTEL_RC6p_ENABLE)
+		rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE;
+
+	if (rc6_mode & INTEL_RC6pp_ENABLE)
+		rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE;
+
+	DRM_INFO("Enabling RC6 states: RC6 %s, RC6p %s, RC6pp %s\n",
+			(rc6_mode & INTEL_RC6_ENABLE) ? "on" : "off",
+			(rc6_mode & INTEL_RC6p_ENABLE) ? "on" : "off",
+			(rc6_mode & INTEL_RC6pp_ENABLE) ? "on" : "off");
+
+	I915_WRITE(GEN6_RC_CONTROL,
+		   rc6_mask |
+		   GEN6_RC_CTL_EI_MODE(1) |
+		   GEN6_RC_CTL_HW_ENABLE);
+
+	I915_WRITE(GEN6_RPNSWREQ,
+		   GEN6_FREQUENCY(10) |
+		   GEN6_OFFSET(0) |
+		   GEN6_AGGRESSIVE_TURBO);
+	I915_WRITE(GEN6_RC_VIDEO_FREQ,
+		   GEN6_FREQUENCY(12));
+
+	I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
+	I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
+		   18 << 24 |
+		   6 << 16);
+	I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000);
+	I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000);
+	I915_WRITE(GEN6_RP_UP_EI, 100000);
+	I915_WRITE(GEN6_RP_DOWN_EI, 5000000);
+	I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
+	I915_WRITE(GEN6_RP_CONTROL,
+		   GEN6_RP_MEDIA_TURBO |
+		   GEN6_RP_MEDIA_HW_MODE |
+		   GEN6_RP_MEDIA_IS_GFX |
+		   GEN6_RP_ENABLE |
+		   GEN6_RP_UP_BUSY_AVG |
+		   GEN6_RP_DOWN_IDLE_CONT);
+
+	for (retries = 500; retries > 0; retries--) {
+		if ((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0)
+			break;
+		DELAY(1);
+	}
+	if (retries == 0)
+		DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
+
+	I915_WRITE(GEN6_PCODE_DATA, 0);
+	I915_WRITE(GEN6_PCODE_MAILBOX,
+		   GEN6_PCODE_READY |
+		   GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
+	for (retries = 500; retries > 0; retries--) {
+		if ((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0)
+			break;
+		DELAY(1);
+	}
+	if (retries == 0)
+		DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
+
+	min_freq = (rp_state_cap & 0xff0000) >> 16;
+	max_freq = rp_state_cap & 0xff;
+	cur_freq = (gt_perf_status & 0xff00) >> 8;
+
+	/* Check for overclock support */
+	for (retries = 500; retries > 0; retries--) {
+		if ((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0)
+			break;
+		DELAY(1);
+	}
+	if (retries == 0)
+		DRM_ERROR("timeout waiting for pcode mailbox to become idle\n");
+	I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_READ_OC_PARAMS);
+	pcu_mbox = I915_READ(GEN6_PCODE_DATA);
+	for (retries = 500; retries > 0; retries--) {
+		if ((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0)
+			break;
+		DELAY(1);
+	}
+	if (retries == 0)
+		DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
+	if (pcu_mbox & (1<<31)) { /* OC supported */
+		max_freq = pcu_mbox & 0xff;
+		DRM_DEBUG("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 50);
+	}
+
+	/* In units of 100MHz */
+	dev_priv->max_delay = max_freq;
+	dev_priv->min_delay = min_freq;
+	dev_priv->cur_delay = cur_freq;
+
+	/* requires MSI enabled */
+	I915_WRITE(GEN6_PMIER,
+		   GEN6_PM_MBOX_EVENT |
+		   GEN6_PM_THERMAL_EVENT |
+		   GEN6_PM_RP_DOWN_TIMEOUT |
+		   GEN6_PM_RP_UP_THRESHOLD |
+		   GEN6_PM_RP_DOWN_THRESHOLD |
+		   GEN6_PM_RP_UP_EI_EXPIRED |
+		   GEN6_PM_RP_DOWN_EI_EXPIRED);
+	mtx_enter(&dev_priv->rps_lock);
+	if (dev_priv->pm_iir != 0)
+		printf("pm_iir %x\n", dev_priv->pm_iir);
+	I915_WRITE(GEN6_PMIMR, 0);
+	mtx_leave(&dev_priv->rps_lock);
+	/* enable all PM interrupts */
+	I915_WRITE(GEN6_PMINTRMSK, 0);
+
+	gen6_gt_force_wake_put(dev_priv);
+	DRM_UNLOCK();
+}
+
+void gen6_update_ring_freq(struct inteldrm_softc *dev_priv)
+{
+	printf("%s stub\n", __func__);
+#ifdef notyet
+	struct drm_device *dev = (struct drm_device *)dev_priv->drmdev;
+	int min_freq = 15;
+	int gpu_freq, ia_freq, max_ia_freq;
+	int scaling_factor = 180;
+	uint64_t tsc_freq;
+
+#if 0
+	max_ia_freq = cpufreq_quick_get_max(0);
+	/*
+	 * Default to measured freq if none found, PCU will ensure we don't go
+	 * over
+	 */
+	if (!max_ia_freq)
+		max_ia_freq = tsc_freq;
+
+	/* Convert from Hz to MHz */
+	max_ia_freq /= 1000;
+#else
+	tsc_freq = atomic_load_acq_64(&tsc_freq);
+	max_ia_freq = tsc_freq / 1000 / 1000;
+#endif
+
+	DRM_LOCK();
+
+	/*
+	 * For each potential GPU frequency, load a ring frequency we'd like
+	 * to use for memory access.  We do this by specifying the IA frequency
+	 * the PCU should use as a reference to determine the ring frequency.
+	 */
+	for (gpu_freq = dev_priv->max_delay; gpu_freq >= dev_priv->min_delay;
+	     gpu_freq--) {
+		int diff = dev_priv->max_delay - gpu_freq;
+		int d;
+
+		/*
+		 * For GPU frequencies less than 750MHz, just use the lowest
+		 * ring freq.
+		 */
+		if (gpu_freq < min_freq)
+			ia_freq = 800;
+		else
+			ia_freq = max_ia_freq - ((diff * scaling_factor) / 2);
+		d = 100;
+		ia_freq = (ia_freq + d / 2) / d;
+
+		I915_WRITE(GEN6_PCODE_DATA,
+			   (ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT) |
+			   gpu_freq);
+		I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY |
+			   GEN6_PCODE_WRITE_MIN_FREQ_TABLE);
+		if (_intel_wait_for(dev,
+		    (I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
+		    10, 1, "915frq")) {
+			DRM_ERROR("pcode write of freq table timed out\n");
+			continue;
+		}
+	}
+
+	DRM_UNLOCK();
+#endif
+}
+
+static void ironlake_init_clock_gating(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
+
+	/* Required for FBC */
+	dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE |
+		DPFCRUNIT_CLOCK_GATE_DISABLE |
+		DPFDUNIT_CLOCK_GATE_DISABLE;
+	/* Required for CxSR */
+	dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE;
+
+	I915_WRITE(PCH_3DCGDIS0,
+		   MARIUNIT_CLOCK_GATE_DISABLE |
+		   SVSMUNIT_CLOCK_GATE_DISABLE);
+	I915_WRITE(PCH_3DCGDIS1,
+		   VFMUNIT_CLOCK_GATE_DISABLE);
+
+	I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
+
+	/*
+	 * According to the spec the following bits should be set in
+	 * order to enable memory self-refresh
+	 * The bit 22/21 of 0x42004
+	 * The bit 5 of 0x42020
+	 * The bit 15 of 0x45000
+	 */
+	I915_WRITE(ILK_DISPLAY_CHICKEN2,
+		   (I915_READ(ILK_DISPLAY_CHICKEN2) |
+		    ILK_DPARB_GATE | ILK_VSDPFD_FULL));
+	I915_WRITE(ILK_DSPCLK_GATE,
+		   (I915_READ(ILK_DSPCLK_GATE) |
+		    ILK_DPARB_CLK_GATE));
+	I915_WRITE(DISP_ARB_CTL,
+		   (I915_READ(DISP_ARB_CTL) |
+		    DISP_FBC_WM_DIS));
+	I915_WRITE(WM3_LP_ILK, 0);
+	I915_WRITE(WM2_LP_ILK, 0);
+	I915_WRITE(WM1_LP_ILK, 0);
+
+	/*
+	 * Based on the document from hardware guys the following bits
+	 * should be set unconditionally in order to enable FBC.
+	 * The bit 22 of 0x42000
+	 * The bit 22 of 0x42004
+	 * The bit 7,8,9 of 0x42020.
+	 */
+	if (IS_IRONLAKE_M(dev_priv)) {
+		I915_WRITE(ILK_DISPLAY_CHICKEN1,
+			   I915_READ(ILK_DISPLAY_CHICKEN1) |
+			   ILK_FBCQ_DIS);
+		I915_WRITE(ILK_DISPLAY_CHICKEN2,
+			   I915_READ(ILK_DISPLAY_CHICKEN2) |
+			   ILK_DPARB_GATE);
+		I915_WRITE(ILK_DSPCLK_GATE,
+			   I915_READ(ILK_DSPCLK_GATE) |
+			   ILK_DPFC_DIS1 |
+			   ILK_DPFC_DIS2 |
+			   ILK_CLK_FBC);
+	}
+
+	I915_WRITE(ILK_DISPLAY_CHICKEN2,
+		   I915_READ(ILK_DISPLAY_CHICKEN2) |
+		   ILK_ELPIN_409_SELECT);
+	I915_WRITE(_3D_CHICKEN2,
+		   _3D_CHICKEN2_WM_READ_PIPELINED << 16 |
+		   _3D_CHICKEN2_WM_READ_PIPELINED);
+}
+
+static void gen6_init_clock_gating(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	int pipe;
+	uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
+
+	I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
+
+	I915_WRITE(ILK_DISPLAY_CHICKEN2,
+		   I915_READ(ILK_DISPLAY_CHICKEN2) |
+		   ILK_ELPIN_409_SELECT);
+
+	I915_WRITE(WM3_LP_ILK, 0);
+	I915_WRITE(WM2_LP_ILK, 0);
+	I915_WRITE(WM1_LP_ILK, 0);
+
+	I915_WRITE(GEN6_UCGCTL1,
+		   I915_READ(GEN6_UCGCTL1) |
+		   GEN6_BLBUNIT_CLOCK_GATE_DISABLE);
+
+	/* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock
+	 * gating disable must be set.  Failure to set it results in
+	 * flickering pixels due to Z write ordering failures after
+	 * some amount of runtime in the Mesa "fire" demo, and Unigine
+	 * Sanctuary and Tropics, and apparently anything else with
+	 * alpha test or pixel discard.
+	 *
+	 * According to the spec, bit 11 (RCCUNIT) must also be set,
+	 * but we didn't debug actual testcases to find it out.
+	 */
+	I915_WRITE(GEN6_UCGCTL2,
+		   GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
+		   GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
+
+	/*
+	 * According to the spec the following bits should be
+	 * set in order to enable memory self-refresh and fbc:
+	 * The bit21 and bit22 of 0x42000
+	 * The bit21 and bit22 of 0x42004
+	 * The bit5 and bit7 of 0x42020
+	 * The bit14 of 0x70180
+	 * The bit14 of 0x71180
+	 */
+	I915_WRITE(ILK_DISPLAY_CHICKEN1,
+		   I915_READ(ILK_DISPLAY_CHICKEN1) |
+		   ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS);
+	I915_WRITE(ILK_DISPLAY_CHICKEN2,
+		   I915_READ(ILK_DISPLAY_CHICKEN2) |
+		   ILK_DPARB_GATE | ILK_VSDPFD_FULL);
+	I915_WRITE(ILK_DSPCLK_GATE,
+		   I915_READ(ILK_DSPCLK_GATE) |
+		   ILK_DPARB_CLK_GATE  |
+		   ILK_DPFD_CLK_GATE);
+
+	for_each_pipe(pipe) {
+		I915_WRITE(DSPCNTR(pipe),
+			   I915_READ(DSPCNTR(pipe)) |
+			   DISPPLANE_TRICKLE_FEED_DISABLE);
+		intel_flush_display_plane(dev_priv, pipe);
+	}
+}
+
+static void ivybridge_init_clock_gating(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	int pipe;
+	uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE;
+
+	I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
+
+	I915_WRITE(WM3_LP_ILK, 0);
+	I915_WRITE(WM2_LP_ILK, 0);
+	I915_WRITE(WM1_LP_ILK, 0);
+
+	/* According to the spec, bit 13 (RCZUNIT) must be set on IVB.
+	 * This implements the WaDisableRCZUnitClockGating workaround.
+	 */
+	I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE);
+
+	I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE);
+
+	I915_WRITE(IVB_CHICKEN3,
+		   CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE |
+		   CHICKEN3_DGMG_DONE_FIX_DISABLE);
+
+	/* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */
+	I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1,
+		   GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC);
+
+	/* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */
+	I915_WRITE(GEN7_L3CNTLREG1,
+			GEN7_WA_FOR_GEN7_L3_CONTROL);
+	I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER,
+			GEN7_WA_L3_CHICKEN_MODE);
+
+	/* This is required by WaCatErrorRejectionIssue */
+	I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG,
+			I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) |
+			GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB);
+
+	for_each_pipe(pipe) {
+		I915_WRITE(DSPCNTR(pipe),
+			   I915_READ(DSPCNTR(pipe)) |
+			   DISPPLANE_TRICKLE_FEED_DISABLE);
+		intel_flush_display_plane(dev_priv, pipe);
+	}
+}
+
+static void g4x_init_clock_gating(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	uint32_t dspclk_gate;
+
+	I915_WRITE(RENCLK_GATE_D1, 0);
+	I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
+		   GS_UNIT_CLOCK_GATE_DISABLE |
+		   CL_UNIT_CLOCK_GATE_DISABLE);
+	I915_WRITE(RAMCLK_GATE_D, 0);
+	dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE |
+		OVRUNIT_CLOCK_GATE_DISABLE |
+		OVCUNIT_CLOCK_GATE_DISABLE;
+	if (IS_GM45(dev_priv))
+		dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE;
+	I915_WRITE(DSPCLK_GATE_D, dspclk_gate);
+}
+
+static void crestline_init_clock_gating(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE);
+	I915_WRITE(RENCLK_GATE_D2, 0);
+	I915_WRITE(DSPCLK_GATE_D, 0);
+	I915_WRITE(RAMCLK_GATE_D, 0);
+	I915_WRITE16(DEUC, 0);
+}
+
+static void broadwater_init_clock_gating(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE |
+		   I965_RCC_CLOCK_GATE_DISABLE |
+		   I965_RCPB_CLOCK_GATE_DISABLE |
+		   I965_ISC_CLOCK_GATE_DISABLE |
+		   I965_FBC_CLOCK_GATE_DISABLE);
+	I915_WRITE(RENCLK_GATE_D2, 0);
+}
+
+static void gen3_init_clock_gating(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	u32 dstate = I915_READ(D_STATE);
+
+	dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING |
+		DSTATE_DOT_CLOCK_GATING;
+	I915_WRITE(D_STATE, dstate);
 }
 
+static void i85x_init_clock_gating(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE);
+}
+
+static void i830_init_clock_gating(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE);
+}
+
+static void ibx_init_clock_gating(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	/*
+	 * On Ibex Peak and Cougar Point, we need to disable clock
+	 * gating for the panel power sequencer or it will fail to
+	 * start up when no ports are active.
+	 */
+	I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
+}
+
+static void cpt_init_clock_gating(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	int pipe;
+
+	/*
+	 * On Ibex Peak and Cougar Point, we need to disable clock
+	 * gating for the panel power sequencer or it will fail to
+	 * start up when no ports are active.
+	 */
+	I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE);
+	I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) |
+		   DPLS_EDP_PPS_FIX_DIS);
+	/* Without this, mode sets may fail silently on FDI */
+	for_each_pipe(pipe)
+		I915_WRITE(TRANS_CHICKEN2(pipe), TRANS_AUTOTRAIN_GEN_STALL_DIS);
+}
+
+static void ironlake_teardown_rc6(struct drm_device *dev)
+{
+	printf("%s stub\n", __func__);
+#ifdef notyet
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	if (dev_priv->renderctx) {
+		i915_gem_object_unpin(dev_priv->renderctx);
+		drm_gem_object_unreference(&dev_priv->renderctx->base);
+		dev_priv->renderctx = NULL;
+	}
+
+	if (dev_priv->pwrctx) {
+		i915_gem_object_unpin(dev_priv->pwrctx);
+		drm_gem_object_unreference(&dev_priv->pwrctx->base);
+		dev_priv->pwrctx = NULL;
+	}
+#endif
+}
+
+static void ironlake_disable_rc6(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	int retries;
+
+	if (I915_READ(PWRCTXA)) {
+		/* Wake the GPU, prevent RC6, then restore RSTDBYCTL */
+		I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT);
+		for (retries = 50; retries > 0; retries--) {
+			if ((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) == RSX_STATUS_ON)
+				break;
+			DELAY(1);
+		}
+		
+		I915_WRITE(PWRCTXA, 0);
+		POSTING_READ(PWRCTXA);
+
+		I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
+		POSTING_READ(RSTDBYCTL);
+	}
+
+	ironlake_teardown_rc6(dev);
+}
+
+#ifdef notyet
+static int ironlake_setup_rc6(struct drm_device *dev)
+{
+	printf("%s stub\n", __func__);
+	return EINVAL;
+#ifdef notyet
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	if (dev_priv->renderctx == NULL)
+		dev_priv->renderctx = intel_alloc_context_page(dev);
+	if (!dev_priv->renderctx)
+		return -ENOMEM;
+
+	if (dev_priv->pwrctx == NULL)
+		dev_priv->pwrctx = intel_alloc_context_page(dev);
+	if (!dev_priv->pwrctx) {
+		ironlake_teardown_rc6(dev);
+		return -ENOMEM;
+	}
+
+	return 0;
+#endif
+}
+#endif
+
+void ironlake_enable_rc6(struct drm_device *dev)
+{
+	printf("%s stub\n", __func__);
+#ifdef notyet
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	int ret;
+
+	/* rc6 disabled by default due to repeated reports of hanging during
+	 * boot and resume.
+	 */
+	if (!intel_enable_rc6(dev))
+		return;
+
+	DRM_LOCK();
+	ret = ironlake_setup_rc6(dev);
+	if (ret) {
+		DRM_UNLOCK();
+		return;
+	}
+
+	/*
+	 * GPU can automatically power down the render unit if given a page
+	 * to save state.
+	 */
+	ret = BEGIN_LP_RING(6);
+	if (ret) {
+		ironlake_teardown_rc6(dev);
+		DRM_UNLOCK();
+		return;
+	}
+
+	OUT_RING(MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN);
+	OUT_RING(MI_SET_CONTEXT);
+	OUT_RING(dev_priv->renderctx->gtt_offset |
+		 MI_MM_SPACE_GTT |
+		 MI_SAVE_EXT_STATE_EN |
+		 MI_RESTORE_EXT_STATE_EN |
+		 MI_RESTORE_INHIBIT);
+	OUT_RING(MI_SUSPEND_FLUSH);
+	OUT_RING(MI_NOOP);
+	OUT_RING(MI_FLUSH);
+	ADVANCE_LP_RING();
+
+	/*
+	 * Wait for the command parser to advance past MI_SET_CONTEXT. The HW
+	 * does an implicit flush, combined with MI_FLUSH above, it should be
+	 * safe to assume that renderctx is valid
+	 */
+	ret = intel_wait_ring_idle(LP_RING(dev_priv));
+	if (ret) {
+		DRM_ERROR("failed to enable ironlake power power savings\n");
+		ironlake_teardown_rc6(dev);
+		DRM_UNLOCK();
+		return;
+	}
+
+	I915_WRITE(PWRCTXA, dev_priv->pwrctx->gtt_offset | PWRCTX_EN);
+	I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
+	DRM_UNLOCK();
+#endif
+}
+
+void intel_init_clock_gating(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	dev_priv->display.init_clock_gating(dev);
+
+	if (dev_priv->display.init_pch_clock_gating)
+		dev_priv->display.init_pch_clock_gating(dev);
+}
 
 /* Set up chip specific display functions */
 static void intel_init_display(struct drm_device *dev)
@@ -1704,8 +9398,8 @@ static void intel_init_display(struct drm_device *dev)
 			dev_priv->display.get_fifo_size = i830_get_fifo_size;
 	}
 
-#ifdef notyet
 	/* Default just returns -ENODEV to indicate unsupported */
+#ifdef notyet
 	dev_priv->display.queue_flip = intel_default_queue_flip;
 
 	switch (INTEL_INFO(dev_priv)->gen) {
@@ -1729,9 +9423,85 @@ static void intel_init_display(struct drm_device *dev)
 		dev_priv->display.queue_flip = intel_gen7_queue_flip;
 		break;
 	}
+#else
+	printf("%s todo set queue_flip\n", __func__);
 #endif
 }
 
+/*
+ * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend,
+ * resume, or other times.  This quirk makes sure that's the case for
+ * affected systems.
+ */
+static void quirk_pipea_force(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	dev_priv->quirks |= QUIRK_PIPEA_FORCE;
+	DRM_DEBUG("applying pipe a force quirk\n");
+}
+
+/*
+ * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
+ */
+static void quirk_ssc_force_disable(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE;
+}
+
+struct intel_quirk {
+	int device;
+	int subsystem_vendor;
+	int subsystem_device;
+	void (*hook)(struct drm_device *dev);
+};
+
+#define	PCI_ANY_ID	(~0u)
+
+struct intel_quirk intel_quirks[] = {
+	/* HP Mini needs pipe A force quirk (LP: #322104) */
+	{ 0x27ae, 0x103c, 0x361a, quirk_pipea_force },
+
+	/* Thinkpad R31 needs pipe A force quirk */
+	{ 0x3577, 0x1014, 0x0505, quirk_pipea_force },
+	/* Toshiba Protege R-205, S-209 needs pipe A force quirk */
+	{ 0x2592, 0x1179, 0x0001, quirk_pipea_force },
+
+	/* ThinkPad X30 needs pipe A force quirk (LP: #304614) */
+	{ 0x3577,  0x1014, 0x0513, quirk_pipea_force },
+	/* ThinkPad X40 needs pipe A force quirk */
+
+	/* ThinkPad T60 needs pipe A force quirk (bug #16494) */
+	{ 0x2782, 0x17aa, 0x201a, quirk_pipea_force },
+
+	/* 855 & before need to leave pipe A & dpll A up */
+	{ 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+	{ 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+
+	/* Lenovo U160 cannot use SSC on LVDS */
+	{ 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
+
+	/* Sony Vaio Y cannot use SSC on LVDS */
+	{ 0x0046, 0x104d, 0x9076, quirk_ssc_force_disable },
+};
+
+static void intel_init_quirks(struct drm_device *dev)
+{
+	struct intel_quirk *q;
+	int i;
+
+	for (i = 0; i < nitems(intel_quirks); i++) {
+		q = &intel_quirks[i];
+		if (dev->pci_device == q->device &&
+		    (dev->pci_subvendor == q->subsystem_vendor ||
+		     q->subsystem_vendor == PCI_ANY_ID) &&
+		    (dev->pci_subdevice == q->subsystem_device ||
+		     q->subsystem_device == PCI_ANY_ID))
+			q->hook(dev);
+	}
+}
+
 /* Disable the VGA plane that we never use */
 static void i915_disable_vga(struct drm_device *dev)
 {
@@ -1747,11 +9517,15 @@ return;
 	else
 		vga_reg = VGACNTRL;
 
-//	vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
+#if 0
+	vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO);
+#endif
 	outb(VGA_SR_INDEX, 1);
 	sr1 = inb(VGA_SR_DATA);
-	outb(VGA_SR_DATA, sr1 | 1<<5);
-//	vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
+	outb(VGA_SR_DATA, sr1 | 1 << 5);
+#if 0
+	vga_put(dev->pdev, VGA_RSRC_LEGACY_IO);
+#endif
 	DELAY(300);
 
 	I915_WRITE(vga_reg, VGA_DISP_DISABLE);
@@ -1788,7 +9562,11 @@ void intel_modeset_init(struct drm_device *dev)
 		dev->mode_config.max_width = 8192;
 		dev->mode_config.max_height = 8192;
 	}
-//	dev->mode_config.fb_base = dev->agp->base;
+#ifdef notyet
+	dev->mode_config.fb_base = dev->agp->base;
+#else
+	printf("%s todo set fb base\n", __func__);
+#endif
 
 	DRM_DEBUG_KMS("%d display pipe%s available.\n",
 		      dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : "");
@@ -1819,10 +9597,231 @@ void intel_modeset_init(struct drm_device *dev)
 #ifdef notyet
 	TASK_INIT(&dev_priv->idle_task, 0, intel_idle_update, dev_priv);
 	callout_init(&dev_priv->idle_callout, CALLOUT_MPSAFE);
+#else
+	printf("%s todo init idle timeout\n", __func__);
 #endif
 }
 
 void intel_modeset_gem_init(struct drm_device *dev)
 {
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+
+	if (IS_IRONLAKE_M(dev_priv))
+		ironlake_enable_rc6(dev);
+
+	intel_setup_overlay(dev);
+}
+
+void intel_modeset_cleanup(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct drm_crtc *crtc;
+	struct intel_crtc *intel_crtc;
+
+	drm_kms_helper_poll_fini(dev);
+	DRM_LOCK();
+
+#if 0
+	intel_unregister_dsm_handler();
+#endif
+
+	TAILQ_FOREACH(crtc, &dev->mode_config.crtc_list, head) {
+		/* Skip inactive CRTCs */
+		if (!crtc->fb)
+			continue;
+
+		intel_crtc = to_intel_crtc(crtc);
+		intel_increase_pllclock(crtc);
+	}
+
+	intel_disable_fbc(dev);
+
+	if (IS_IRONLAKE_M(dev_priv))
+		ironlake_disable_drps(dev);
+	if (IS_GEN6(dev_priv))
+		gen6_disable_rps(dev);
+
+	if (IS_IRONLAKE_M(dev_priv))
+		ironlake_disable_rc6(dev);
+
+	/* Disable the irq before mode object teardown, for the irq might
+	 * enqueue unpin/hotplug work. */
+	drm_irq_uninstall(dev);
+	DRM_UNLOCK();
+
+#ifdef notyet
+	if (taskqueue_cancel(dev_priv->tq, &dev_priv->hotplug_task, NULL))
+		taskqueue_drain(dev_priv->tq, &dev_priv->hotplug_task);
+	if (taskqueue_cancel(dev_priv->tq, &dev_priv->rps_task, NULL))
+		taskqueue_drain(dev_priv->tq, &dev_priv->rps_task);
+#else
+	printf("%s todo cancel task\n", __func__);
+#endif
+
+	/* Shut off idle work before the crtcs get freed. */
+	TAILQ_FOREACH(crtc, &dev->mode_config.crtc_list, head) {
+		intel_crtc = to_intel_crtc(crtc);
+#ifdef notyet
+		callout_drain(&intel_crtc->idle_callout);
+#else
+		printf("%s todo drain timeout\n", __func__);
+#endif
+	}
+#ifdef notyet
+	callout_drain(&dev_priv->idle_callout);
+	if (taskqueue_cancel(dev_priv->tq, &dev_priv->idle_task, NULL))
+		taskqueue_drain(dev_priv->tq, &dev_priv->idle_task);
+#else
+	printf("%s todo cancel idle task\n", __func__);
+#endif
+
+	drm_mode_config_cleanup(dev);
+}
+
+/*
+ * Return which encoder is currently attached for connector.
+ */
+struct drm_encoder *intel_best_encoder(struct drm_connector *connector)
+{
+	return &intel_attached_encoder(connector)->base;
+}
+
+void intel_connector_attach_encoder(struct intel_connector *connector,
+				    struct intel_encoder *encoder)
+{
+	connector->encoder = encoder;
+	drm_mode_connector_attach_encoder(&connector->base,
+					  &encoder->base);
+}
+
+/*
+ * set vga decode state - true == enable VGA decode
+ */
+int intel_modeset_vga_set_state(struct drm_device *dev, bool state)
+{
 	printf("%s stub\n", __func__);
+	return EINVAL;
+#ifdef notyet
+	struct inteldrm_softc *dev_priv;
+	device_t bridge_dev;
+	u16 gmch_ctrl;
+
+	dev_priv = dev->dev_private;
+	bridge_dev = intel_gtt_get_bridge_device();
+	gmch_ctrl = pci_read_config(bridge_dev, INTEL_GMCH_CTRL, 2);
+	if (state)
+		gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE;
+	else
+		gmch_ctrl |= INTEL_GMCH_VGA_DISABLE;
+	pci_write_config(bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl, 2);
+	return (0);
+#endif
+}
+
+struct intel_display_error_state {
+	struct intel_cursor_error_state {
+		u32 control;
+		u32 position;
+		u32 base;
+		u32 size;
+	} cursor[2];
+
+	struct intel_pipe_error_state {
+		u32 conf;
+		u32 source;
+
+		u32 htotal;
+		u32 hblank;
+		u32 hsync;
+		u32 vtotal;
+		u32 vblank;
+		u32 vsync;
+	} pipe[2];
+
+	struct intel_plane_error_state {
+		u32 control;
+		u32 stride;
+		u32 size;
+		u32 pos;
+		u32 addr;
+		u32 surface;
+		u32 tile_offset;
+	} plane[2];
+};
+
+struct intel_display_error_state *
+intel_display_capture_error_state(struct drm_device *dev)
+{
+	struct inteldrm_softc *dev_priv = dev->dev_private;
+	struct intel_display_error_state *error;
+	int i;
+
+	error = malloc(sizeof(*error), M_DRM, M_NOWAIT);
+	if (error == NULL)
+		return NULL;
+
+	for (i = 0; i < 2; i++) {
+		error->cursor[i].control = I915_READ(CURCNTR(i));
+		error->cursor[i].position = I915_READ(CURPOS(i));
+		error->cursor[i].base = I915_READ(CURBASE(i));
+
+		error->plane[i].control = I915_READ(DSPCNTR(i));
+		error->plane[i].stride = I915_READ(DSPSTRIDE(i));
+		error->plane[i].size = I915_READ(DSPSIZE(i));
+		error->plane[i].pos = I915_READ(DSPPOS(i));
+		error->plane[i].addr = I915_READ(DSPADDR(i));
+		if (INTEL_INFO(dev_priv)->gen >= 4) {
+			error->plane[i].surface = I915_READ(DSPSURF(i));
+			error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
+		}
+
+		error->pipe[i].conf = I915_READ(PIPECONF(i));
+		error->pipe[i].source = I915_READ(PIPESRC(i));
+		error->pipe[i].htotal = I915_READ(HTOTAL(i));
+		error->pipe[i].hblank = I915_READ(HBLANK(i));
+		error->pipe[i].hsync = I915_READ(HSYNC(i));
+		error->pipe[i].vtotal = I915_READ(VTOTAL(i));
+		error->pipe[i].vblank = I915_READ(VBLANK(i));
+		error->pipe[i].vsync = I915_READ(VSYNC(i));
+	}
+
+	return error;
 }
+
+#ifdef notyet
+void
+intel_display_print_error_state(struct sbuf *m,
+				struct drm_device *dev,
+				struct intel_display_error_state *error)
+{
+	int i;
+
+	for (i = 0; i < 2; i++) {
+		sbuf_printf(m, "Pipe [%d]:\n", i);
+		sbuf_printf(m, "  CONF: %08x\n", error->pipe[i].conf);
+		sbuf_printf(m, "  SRC: %08x\n", error->pipe[i].source);
+		sbuf_printf(m, "  HTOTAL: %08x\n", error->pipe[i].htotal);
+		sbuf_printf(m, "  HBLANK: %08x\n", error->pipe[i].hblank);
+		sbuf_printf(m, "  HSYNC: %08x\n", error->pipe[i].hsync);
+		sbuf_printf(m, "  VTOTAL: %08x\n", error->pipe[i].vtotal);
+		sbuf_printf(m, "  VBLANK: %08x\n", error->pipe[i].vblank);
+		sbuf_printf(m, "  VSYNC: %08x\n", error->pipe[i].vsync);
+
+		sbuf_printf(m, "Plane [%d]:\n", i);
+		sbuf_printf(m, "  CNTR: %08x\n", error->plane[i].control);
+		sbuf_printf(m, "  STRIDE: %08x\n", error->plane[i].stride);
+		sbuf_printf(m, "  SIZE: %08x\n", error->plane[i].size);
+		sbuf_printf(m, "  POS: %08x\n", error->plane[i].pos);
+		sbuf_printf(m, "  ADDR: %08x\n", error->plane[i].addr);
+		if (INTEL_INFO(dev_priv)->gen >= 4) {
+			sbuf_printf(m, "  SURF: %08x\n", error->plane[i].surface);
+			sbuf_printf(m, "  TILEOFF: %08x\n", error->plane[i].tile_offset);
+		}
+
+		sbuf_printf(m, "Cursor [%d]:\n", i);
+		sbuf_printf(m, "  CNTR: %08x\n", error->cursor[i].control);
+		sbuf_printf(m, "  POS: %08x\n", error->cursor[i].position);
+		sbuf_printf(m, "  BASE: %08x\n", error->cursor[i].base);
+	}
+}
+#endif