summaryrefslogtreecommitdiff
path: root/sys/dev/usb
diff options
context:
space:
mode:
authorTheo de Raadt <deraadt@cvs.openbsd.org>2006-06-21 18:52:03 +0000
committerTheo de Raadt <deraadt@cvs.openbsd.org>2006-06-21 18:52:03 +0000
commit39d5297e9b7ced3f9dc8b7b4819534b475816bbd (patch)
treec303306c8fe1faa56877cffddb83d3a6d17e624e /sys/dev/usb
parentd7ecf25662a1c749dfdb8cdd1219c797cf14600e (diff)
minimal cleaning
Diffstat (limited to 'sys/dev/usb')
-rw-r--r--sys/dev/usb/if_zydreg.h76
1 files changed, 38 insertions, 38 deletions
diff --git a/sys/dev/usb/if_zydreg.h b/sys/dev/usb/if_zydreg.h
index bdc1a195a64..54ae9704947 100644
--- a/sys/dev/usb/if_zydreg.h
+++ b/sys/dev/usb/if_zydreg.h
@@ -1,4 +1,4 @@
-/* $Id: if_zydreg.h,v 1.1 2006/06/21 18:45:11 deraadt Exp $ */
+/* $OpenBSD: if_zydreg.h,v 1.2 2006/06/21 18:52:02 deraadt Exp $ */
/*
* Copyright (c) 2006 by Florian Stoehr <ich@florian-stoehr.de>
@@ -15,7 +15,7 @@
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-
+
/*
* ZyDAS ZD1211 USB WLAN driver
*/
@@ -28,7 +28,7 @@
* - EEPROM register space (16-bit registers)
* - Firmware register space (16-bit registers)
*
- * I'll use the masks and type constants below to handle
+ * I'll use the masks and type constants below to handle
* register filtering in code (require different treatment).
*/
@@ -39,7 +39,7 @@ enum zyd_masks {
enum zyd_ranges {
ZYD_RANGE_USB = 0x10000, /* Range: USB */
- ZYD_RANGE_CTL = 0x20000, /* Range: Control */
+ ZYD_RANGE_CTL = 0x20000, /* Range: Control */
ZYD_RANGE_E2P = 0x40000, /* Range: EEPROM */
ZYD_RANGE_FW = 0x80000 /* Range: Firmware */
};
@@ -54,7 +54,7 @@ enum zyd_ranges {
/* Mask register offset (kick the range off) */
#define ZYD_GET_OFFS(addr) \
(ZYD_MASK_NORM & ((uint32_t)(addr) & ZYD_MASK_ADDR_OFFS))
-
+
/* Combine range and offset */
#define ZYD_BUILDCOMBO(range, offs) \
(ZYD_GET_RANGE(range) | ZYD_GET_OFFS(offs))
@@ -71,7 +71,7 @@ enum zyd_ranges {
#define ZYD_CR_ENABLE_PS_MANUAL_AGC ZYD_REG_CTL(0x43C)
#define ZYD_CR_CONFIG_PHILIPS ZYD_REG_CTL(0x440)
#define ZYD_CR_SA2400_SER_AP ZYD_REG_CTL(0x444)
-#define ZYD_CR_I2C_WRITE ZYD_REG_CTL(0x444)
+#define ZYD_CR_I2C_WRITE ZYD_REG_CTL(0x444)
#define ZYD_CR_SA2400_SER_RP ZYD_REG_CTL(0x448)
#define ZYD_CR_RADIO_PE ZYD_REG_CTL(0x458)
#define ZYD_CR_RST_BUS_MASTER ZYD_REG_CTL(0x45C)
@@ -88,7 +88,7 @@ enum zyd_ranges {
#define ZYD_CR_ADDA_MBIAS_WARMTIME ZYD_REG_CTL(0x508)
#define ZYD_CR_INTERRUPT ZYD_REG_CTL(0x510)
#define ZYD_CR_MAC_PS_STATE ZYD_REG_CTL(0x50C)
-
+
/*
* Following three values are in time units (1024us)
* Following condition must be met:
@@ -100,7 +100,7 @@ enum zyd_ranges {
/*
* MAC registers
- */
+ */
#define ZYD_MAC_MACADDRL ZYD_REG_CTL(0x610) /* MAC address (low) */
#define ZYD_MAC_MACADDRH ZYD_REG_CTL(0x614) /* MAC address (high) */
#define ZYD_MAC_BSSADRL ZYD_REG_CTL(0x618) /* BSS address (low) */
@@ -220,7 +220,7 @@ enum zyd_ranges {
#define ZYD_FIRMDOWN_REQ 0x40 /* Firmware dl request type */
#define ZYD_FIRMDOWN_ID 0x30 /* Firmware dl ID */
#define ZYD_FIRMSTAT_REQ 0xC0 /* Firmware stat query type */
-#define ZYD_FIRMSTAT_ID 0x31 /* Firmware stat query ID */
+#define ZYD_FIRMSTAT_ID 0x31 /* Firmware stat query ID */
/*
* Firmware uploader - status
@@ -289,7 +289,7 @@ enum zyd_ranges {
#define ZYD_RF_REG_BITS 6
#define ZYD_RF_VALUE_BITS 18
#define ZYD_RF_RV_BITS ZYD_RF_REG_BITS + ZYD_RF_VALUE_BITS
-
+
/*
* Various
*/
@@ -332,11 +332,11 @@ enum zyd_ranges {
#define ZYD_CR9 ZYD_REG_CTL(0x0024)
/* bit 2: antenna switch (together with ZYD_CR10) */
-#define ZYD_CR10 ZYD_REG_CTL(0x0028)
+#define ZYD_CR10 ZYD_REG_CTL(0x0028)
/* bit 1: antenna switch (together with ZYD_CR9)
* RF2959 controls with ZYD_CR11 radion on and off
*/
-#define ZYD_CR11 ZYD_REG_CTL(0x002C)
+#define ZYD_CR11 ZYD_REG_CTL(0x002C)
/* bit 6: TX power control for OFDM
* RF2959 controls with ZYD_CR10 radio on and off
*/
@@ -588,7 +588,7 @@ enum zyd_ranges {
/*
* Device configurations and types
*/
-
+
struct zyd_type {
uint16_t vid;
uint16_t pid;
@@ -612,7 +612,7 @@ struct zyd_type zyd_devs[] = {
{ 0x2019, 0xc007 }, /* Planex GW-US54GZL */
{ 0x5173, 0x1809 }, /* Sweex wireless USB 54 Mbps */
{ 0x6891, 0xa727 }, /* 3COM 3CRUSB10075 */
- { }
+ { }
};
static const char *zyd_rfs[] = {
@@ -640,7 +640,7 @@ struct zyd_channel_range {
uint8_t end; /* exclusive (channel must be less than end) */
};
-/*
+/*
* Blows size up (132 bytes, but not that smaller than extra
* mapping code, so ...
*/
@@ -660,11 +660,11 @@ static const struct zyd_channel_range zyd_channel_ranges[] = {
* Supported rates for 802.11b/g modes (in 500Kbps unit).
*/
static const struct ieee80211_rateset zyd_rateset_11b = {
- 4, { 2, 4, 11, 22 }
+ 4, { 2, 4, 11, 22 }
};
-static const struct ieee80211_rateset zyd_rateset_11g = {
- 8, { 12, 18, 24, 36, 48, 72, 96, 108 }
+static const struct ieee80211_rateset zyd_rateset_11g = {
+ 8, { 12, 18, 24, 36, 48, 72, 96, 108 }
};
/*
@@ -674,7 +674,7 @@ static const struct ieee80211_rateset zyd_rateset_11g = {
/*
* Driver internal
*/
-
+
enum zyd_operationmode {
OM_NONEYET = 0,
OM_ADHOC = 1,
@@ -721,14 +721,14 @@ enum zyd_stohostflags {
/*
* Control set format
- */
+ */
enum zyd_controlsetformatrate {
/* MBPS rates for Direct Sequence Spread Spectrum */
CSF_RT_CCK_1 = 0x00,
CSF_RT_CCK_2 = 0x01,
CSF_RT_CCK_5_5 = 0x02,
CSF_RT_CCK_11 = 0x03,
-
+
/* MBPS rates for Orthogonal Frequency Division Multiplexing */
CSF_RT_OFDM_6 = 0x0b,
CSF_RT_OFDM_9 = 0x0f,
@@ -828,15 +828,15 @@ enum zyd_rxstatusreportframestaterrind {
/*
* Structures
*/
-
+
struct zyd_controlsetformat {
uint8_t rate :4;
uint8_t modulationtype :1;
uint8_t preamble :1;
uint8_t reserved :2;
-
+
uint16_t txlen;
-
+
uint8_t needbackoff :1;
uint8_t multicast :1;
uint8_t frametype :2;
@@ -844,7 +844,7 @@ struct zyd_controlsetformat {
uint8_t rts :1;
uint8_t encryption :1;
uint8_t selfcts :1;
-
+
uint16_t packetlength;
uint16_t currentlength;
uint8_t service;
@@ -856,7 +856,7 @@ struct zyd_rxstatusreport {
uint8_t signalqualitycck;
uint8_t signalqualityofdm;
uint8_t decryptiontype;
-
+
uint8_t modulationtype :1;
uint8_t rxerrorreason :6;
uint8_t errorindication :1;
@@ -919,7 +919,7 @@ struct zyd_intinsingle
uWord sts2;
uWord sts3;
uWord sts4;
- uWord sts5;
+ uWord sts5;
} UPACKED;
/* Int/bulk OUT interface @ EP 4 (single register access) */
@@ -948,7 +948,7 @@ struct zyd_intinmultioutput {
/* Int/bulk OUT interface @ EP 4 (multi register access) read */
struct zyd_intoutmultiread {
uWord id;
- uWord addr[15];
+ uWord addr[15];
} UPACKED;
/* Int/bulk OUT interface @ EP 4 (multi register access) write */
@@ -1055,16 +1055,16 @@ struct zyd_softc {
USBBASEDEVICE zyd_dev;
struct ieee80211com sc_ic;
int (*sc_newstate)(struct ieee80211com *, enum ieee80211_state, int);
-
+
/* Interrupt related */
int pending;
- struct clist q_reply; /* queue for register read replies */
+ struct clist q_reply; /* queue for register read replies */
uint8_t *ibuf;
struct selinfo rsel;
-
+
/* Device state */
enum ieee80211_state sc_state;
-
+
/* Command to device (for usb task) */
enum zyd_cmd sc_cmd;
@@ -1079,7 +1079,7 @@ struct zyd_softc {
/* Calibration tables */
uint8_t pwr_cal_values[ZYD_E2P_CHANNEL_COUNT];
uint8_t pwr_int_values[ZYD_E2P_CHANNEL_COUNT];
- uint8_t ofdm_cal_values[3][ZYD_E2P_CHANNEL_COUNT];
+ uint8_t ofdm_cal_values[3][ZYD_E2P_CHANNEL_COUNT];
/* USB stuff */
struct usb_task sc_task;
@@ -1087,11 +1087,11 @@ struct zyd_softc {
usbd_interface_handle zyd_iface;
int zyd_ed[ZYD_ENDPT_CNT];
usbd_pipe_handle zyd_ep[ZYD_ENDPT_CNT];
-
+
/* Ethernet stuff */
/* struct ethercom zyd_ec;*/
struct ifmedia zyd_media;
-
+
/* TX/RX */
struct zyd_rx_data rx_data[ZYD_RX_LIST_CNT];
struct zyd_tx_data tx_data[ZYD_TX_LIST_CNT];
@@ -1101,11 +1101,11 @@ struct zyd_softc {
int zyd_if_flags;
struct timeval zyd_rx_notice;
-
+
struct timeout scan_ch;
-
+
int tx_timer;
-
+
/* WLAN specific */
enum zyd_operationmode zyd_operation;
uint8_t zyd_bssid[ETHER_ADDR_LEN];